advertisement
08.0000
08
A/C Supplies
Adhesive Back Fastener
Air Evac II
Air Hose & Regulators
Air Hose Accessories
Air Sanders
Air Tools
Airline Filters & Regulators
Arbors, Pilot Drills
Assortment Boxes
Bit Holders & Adapters
Blow Guns
Brass
Brushes
Caulking Guns
Couplers
DBS 3600
Dent Lifters
Dispensers
Drill Bits
Ear Protection
Electrical Hand Tools
Files
Gloves
Grease Guns
Hand Tools
Heating Tools
Holesaws
Knives & Blades
Masks
Micro Grip
Tools & Shop Supplies
08.0640 - 08.0650
08.0570
08.0265
08.0250 - 08.0255
08.0175 - 08.0180,
08.0240
08.0095
08.0075 - 08.0080
08.0245
08.0300
08.0675
08.0320 - 08.0335
08.0260
08.0185 - 08.0235
08.0360 - 08.0365
08.0445 - 08.0460
08.0130 - 08.0170
08.0100
08.0065 - 08.0070
08.0405 - 08.0435
08.0290 - 08.0295
08.0705
08.0390 - 08.0400
08.0350 - 08.0355
08.0720 - 08.0745
08.0435 - 08.0440
08.0055 - 08.0060
08.0500 - 08.0515
08.0305
08.0370 - 08.0375
08.0690 - 08.0700
08.0475
08.0000
08
Nipple Interchange Chart
Pin Punch Set
Pistol Vac
Plastic Lined Lug Sockets
Pliers & Shears
Protective Covers
Racks
Ratchet Bit Set
Rivet Tools
Safety Eyewear
Saws & Cutters
Shop Supplies
Socket Sets
Spill Control
Spray Guns
Storage
Stud Driver & Remover
Stud Extractor
Tape
Twist Drills
Valve Adjusting Tools
Vario Point Cutters
Welding Supplies
Wire & Grinding Wheels
Work Lights
Wrenches
Tools & Shop Supplies
08.0105 - 08.0125
08.0635
08.0260
08.0635
08.0385
08.0585 - 08.0600
08.0660 - 08.0670
08.0020
08.0040 - 08.0050
08.0710 - 08.0715
08.0340 - 08.0345
08.0615 - 08.0625
08.0025 - 08.0035
08.0605 - 08.0610
08.0465 - 08.0470
08.0655,
08.0680 - 08.0685
08.0360
08.0630
08.0535 - 08.0565
08.0270 - 08.0285,
08.0310 - 08.0315
08.0630
08.0085 - 08.0090
08.0480 - 08.0495
08.0570 - 08.0575
08.0520 - 08.0530
08.0005 - 08.0015
08.0000
WURTH COMBINATION WRENCHES WITH POWERDRIV
®
For a sure grip and higher transmission of force.
• Extremely strong, high quality chrome vanadium steel
• Withstands the highest loads
• Exceptionally long service life
• Achieves the highest torque values
• Low deformation under extreme loads
POWERDRIV
®
The POWERDRIV ® system was developed to meet the particularly high demands in the aviation industry in order to provide the highest level of fit tolerances.
The POWERDRIV
®
system enables a higher transmission of forces at the ring and reduces wear on the bolt heads.
Perfect Workmanship
• Nickel pre-treatment provides optimal adhesion of chrome even in extremely heavy
duty.
• Round finish without any sharp edges and
corners.
• Matte chrome-plating provides sure grip, even with oily hands.
• Exact fit due to high-gloss polish.
• FEM calculation concentrates the material where the loads offer.
• Tightest tolerances of the jaw openings guar- antee more reliability and safety in intensive
use.
The Principle
The POWERDRIV ® does not grip the bolt heads as usual at the corners but on the flanks.
• This enlarges the driving flat, thus permitting a surer grip of the ring and a higher transmi- ssion of force.
• The service life of bolts is increased notice-
ably because rounding off of the bolt heads
is avoided.
• Even old and rusty bolts can be undone with
POWERDRIV ® without any rounding off.
Exceeds DIN Standards by far
Torque Values in excess of DIN:
Highest torque values for the most extreme conditions.
Without POWERDRIV
®
- Line pressure With POWERDRIV
®
- Line pressure
08.0005
WURTH METRIC THIN LINE DOUBLE OPEN END WRENCH SET
• Standard: DIN 3110 / ISO 1085
• Material: Chrome vanadium steel
• Surface finish: Chrome-plated polished heads
• Jaw position 15º, strong heads for heavy
duty use
Set
12
in mm
6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27, 25x28, 30x32
Art #
071330443
WURTH METRIC & US COMBINATION WRENCH SETS
• Ring end POWERDRIV
®
double hex
• Standard: DIN 3113A / ISO 3318/7738
• Material: Chrome vanadium steel
• Surface finish: Chrome-plated polished heads
• Jaw position 15º, strong heads for heavy duty use
• Double hex ring and jaw position of 15º for an optimal grip ratio, resulting in minimal rotating angle
• The 15º angle of the ring wrench provides
more free space for the fingers or to work
around obstacles
Set
11
in mm
8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 22
08.0010
Art #
071330140
WURTH METRIC DOUBLE ENDED OFFSET BOX END WRENCH SET
• POWERDRIV ® double hex
• Standard: DIN 838 / ISO 3318
• Material: Chrome vanadium steel
• Surface finish: Chrome-plated polished heads
• Ring end offset by 18º
• The slim design is characterized by mini-
mized external dimensions, pronounced
rounded contours and smooth edges
• Deep-set bolt connections can be loosened optimally due to the deep-offset and fine ring
heads
Set
8
in mm
6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22
FLEX RATCHET RING WRENCH
Art #
071330540
• The 180˚ articulated joint of the ring wrench allows easy and flexible access to work, even in close tolerance areas
• Power take-off: ring end POWERDRIV® bihexagonal, fine pitch, 72 teeth
• Standard: max. torque according to DIN
899
• Material: Chrome-Vanadium steel
• Surface finish: bright polished, chrome-plated
• Geometry: open end offset 15˚, ring end
180˚ joint, sturdy heads for heavy duty use
• Application: loosen screws with open end, unscrew with ratchet mechanism of ring end
• This is a special tool that may not be subject- ed to loads in excess of maximum torque values. For that reason, the tool is of limited suitability for loosening of tight screws
Sold Separately:
Art. #
071425308
071425309
071425310
071425311 in mm Art. #
8
071425312
9
10
11
071425313
071425314
071425315 in mm
12
13
14
15
Art. #
071425316
071425317
071425318
071425319
08.0015
in mm
16
17
18
19
Set in mm Art #
6 8, 10, 12, 13, 17, 19
071425350
RATCHET BIT SET 10 MM DIAMETER
Bit set especially for automobiles and commercial vehicles,
38 pieces.
• Ratchet for 10 mm bits
• Additional adapter allows use of a 1/2” ratchet
• Supplied in a metal box with high quality interior foam compartment with clamping effect
Description
Ratchet Bit Set
Art #
096512370
Destination
Ratchet for 10mm bits
Adapter for 1/2" ratchet
TX 20 with pin
TX 25 with pin
TX 27 with pin
TX 30 with pin
TX 40 with pin
TX 45 with pin
TX 50 with pin
TX 55 with pin
TX 20
TX 25
TX 27
TX 30
TX 40
TX 45
TX 50
TX 55
Drive Length Art. #
175mm
071412100
37mm
07151303
30mm
75mm
061478820
061478825
061478827
061478830
061478840
061478845
061478850
061478855
0614788120
0614788125
0614788127
0614788130
0614788140
0614788145
0614788150
0614788155
Ratchet for 10 mm bits
• Head: 72 teeth, swivel angle 5˚, round, compact head
• Shaft: chrome-plated, high-grip 2-component handle
Description
Ratchet for 10 mm bits
Art #
071412100
1
1
2
Ratchet with short 10 mm bit
1/2” ratchet with adapter
2
Destination
TX 40
TX 45
TX 50
Hexagon socket M5
Hexagon socket M6
Hexagon socket M7
Hexagon socket M8
Hexagon socket M10
Hexagon socket M12
Triple Square M5
Triple Square M6
Triple Square M8
Triple Square M10
Triple Square M12
Triple Square M6
Triple Square M8
Triple Square M10
Triple Square M12
PH 2
PH 3
Drive Length Art. #
0614788240
120 mm
0614788245
0614788250
30 mm
30 mm
75 mm
30 mm
0614788305
0614788306
0614788307
0614788308
0614788310
0614788312
0614788405
0614788406
0614788408
0614788410
0614788412
0614788506
0614788508
0614788510
0614788512
0614788902
0614788903
08.0020
L1 mm
L2 mm
B1 mm
175 160 19
Repair Set
B2 mm
33
D1 mm
26
D2 mm
20
Art #
071412100
071511311
Description
Ratchet Bit Set
Art #
096512370
1/4” MULTI-USE SOCKET SET
• Take-off: by-hexagon, multi-use profile
• Geometry: short
• Supplied in a metal box with high-quality foam insert
compartment
• Newly developed multi-purpose profile fitting the 5 most common screw heads. Therefore, one set is sufficient for all requirements
• Hexagon metric, square metric, bi-hexagon metric, hexagon inch and external Torx
• High-quality multi-use socket bits guarantee a long service life
• Chrome plated and polished
Description
1/4" Multi-Use Socket Set, 32 pcs.
Art #
096511032
Hexagonal metric Bi-hexagonal metric
Hexagon inch
10
11
12
13
14
7
8
9
mm
4
5
5.5
6
Multi-
Use
Profile
Metric
Hex.
US
Hex.
mm
size 4 size 5
inch
5/32" size 5.5 7/32" size 6 size 7 size 8 size 9
TX
E5
E8
9/32"
5/16" E10
11/32" size 10 3/8" E12 size 11 7/16" E14 size 12 15/32" E16 size 13 1/2" size 14 9/16" E18
Ext.
Torx
Square metric External
Torx
Square mm Art. #
071311304
size 4
071311305
size 4.5
0713113055
size 5
071311306
071311307
size 8 size 9
071311308
071311309
071311310
size 10
071311311
071311312
071311313
071311314
Description
Reversing ratchet
Extension
Extension
Universal Joint
Screwdriver handle
Adapter with quick change chuck
12 multi-use sockets, one each sizes 4-14
Bit PH 2
08.0025
Bit hex, socket size 3
Bit hex, socket size 4
Bit hex, socket size 6
TX 10
TX 15
TX 20
TX 25
TX 30
TX 40
Drive Length Art. #
138 mm
071411151
100 mm
0713118104
150 mm
0713118106
33 mm
0713118301
216 mm
0613430311
30 mm
07151101
22 mm
25 mm
25 mm
071311304
Thru
071311314
0614176461
061417693
061417694
061417696
06143110
06143115
06143120
06143125
06143130
06143140
3/8” MULTI-SOCKET SET
• Bit: 12-sided, multi-profile
• Geometry: short
• Supplied in a metal box with high-quality foam insert
compartment
• Newly developed multi-purpose profile fitting the 5 most common screw heads. Therefore, one set is sufficient for all requirements
• Hexagon metric, square metric, bi-hexagon metric, hexagon inch and external Torx
• High-quality multi-use socket bits guarantee a long service life
• Chrome plated and polished
Description
3/8" Multi-Socket Set, 22 pcs.
Art #
096512022
18
19
20
21
22
14
15
16
17
7
8
9
10
11
12
13
mm
6
6.3
Multi-
Use
Profile
6-sd./
12-sd.
US
Hex.
18
19
20
21
22
14
15
16
17
7
8
9
10
11
12
13
mm
6
6.3
inch TX
E8
1/4"
9/32"
5/16" E10
11/32"
3/8" E12
7/16" E14
15/32" E16
1/2"
E18 9/16"
19/32"
5/8" E20
3/4"
25/32"
13/16" E26
7/8"
Ext.
Torx
E22
E24
E28
Square mm
5
8
9
10
12
13
14
16
17
18
Art. #
071312306
0713123063
071312307
071312308
071312309
071312310
071312311
071312312
071312313
071312314
071312315
071312316
071312317
071312318
071312319
071312320
071312321
071312322
Hexagonal metric Bi-hexagonal metric
Hexagon inch
Square metric
Description
Ratchet
Extension
Extension
Universal Joint
18 Multi-Use Sockets,
1 each - Sizes 6-22 mm
External
Torx
Drive Length Art. #
175 mm
071412151
125 mm
0713128105
250 mm
0713128110
55 mm
0713128301
25.5 -
31 mm
071312306 -
071312322
08.0030
Description
3/8" Multi-Socket Set, 22 pcs.
Art #
096512022
1/2” MULTI-SOCKET SET
• Tip: 12-sided, multi-profile
• Geometry: short
• Supplied in a metal box with high-quality foam insert
compartment
• Newly developed multi-purpose profile fitting the 5 most common screw heads. Therefore, one set is sufficient for all requirements
• Hexagon metric, square metric, bi-hexagon metric, hexagon inch and external Torx
• High-quality multi-use socket bits guarantee a long service life
• Chrome plated and polished
Description
1/2" Multi-Socket Set, 23 pcs.
Art #
096513023
Hexagonal metric
Bi-hexagonal metric
Hexagon inch
24
26
27
28
30
32
19
20
21
22
12
13
14
15
16
17
18
mm
10
11
Multi-
Use
Profile
6-sd./
12-sd.
US
Hex.
Ext.
Torx mm inch
size 10 3/8"
TX
E12 size 11 7/16" E14 size 12 15/32" E16 size 13 1/2" size 14 9/16" E18 size 15 19/32"
E20 size 16 5/8" size 17 size 18 size 19 3/4" size 20 25/32"
E22
E24 size 21 13/16" E26 size 22 7/8" E28 size 24 15/16" E30 size 26 E32 size 27 11/16" E34 size 28 1-1/8" E36 size 30 1-3/16" E38 size 32 1-1/4" E40
Square mm
size 8 size 9
Art. #
071213410
071213411
071213412
size 10
071213413
071213414
size 12
071213415
size 13
071213416
size 14
071213417
071213418
071213419
size 16
071213420
size 17
071213421
size 18
071213422
size 19
071213424
size 21
071213426
size 22
071213427
size 23
071213428
size 24
071213430
size 26
071213432
08.0035
Square metric
External
Torx
Description
Reversing Ratchet
Extension
Extension
Universal Joint
19 Multi-Use Sockets,
1 each - Sizes M10-M32
Drive Length Art. #
250 mm
0712012
125 mm
0712138105
250 mm
0712138110
70 mm
36 mm -
44 mm
0712138301
071213410 -
071213432
1/2” STANDARD SOCKET WRENCH ASSORTMENT
One ratchet
One 125mm extension
One 250mm extension
One Cardan joint
17 Socket Wrench Inserts Sizes
3/8”, 7/16”, 1/2”, 9/16”, 19/32”, 5/8”,
11/16”, 3/4”, 25/32”, 13/16”, 7/8”,
15/16”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”
Description
1/2” Standard Socket Wrench Assortment - 21 pieces
Art #
09651321
ADAPTER ASSORTMENT
Combined adapter assortment with most common socket wrench and bit adapters.
Socket Wrench Adapters (1 each)
1 x 3/4” - 1/2”, 1/2” - 3/4”, 1/2” - 3/8”,
1 x 3/8” - 1/4”, 1/4” - 3/8”, 3/8” - 1/2”
Bit Adapters
1 x 1/4” - 1/4”, 3/8” - 5/16”
Description
Adapter Assortment - 8 pieces
Art #
09651280
08.0036
PLIER/CUTTER SET (3-PC)
1
2
3
Individual Pliers/Cutters NOT sold separately, only as a set.
Description
Plier/Cutter Set - 3 piece
Art #
071501561
Cutting Tolerances
# Tool Length
Dia. 1:
Med.-Hard Wire
1
Combo Pliers 7” (180 mm) 2.8 mm
Needle Nose Pliers - Details:
2
Nose Pliers 8” (200 mm) 2.8 mm
Dia. 2:
Hard Wire
2.5 mm
2.5 mm
Dia. 3:
Piano Wire
-
-
Ergonomic, anti-slip handle for comfortable working conditions and optimal force feel.
Pliers:
For gripping, holding and cutting soft and hard wires and cables. Strength-saving, clean cutting due to specially milled precision cutting edge.
• High-quality tool steel ensures long tool life and precision of gripping and cutting
surfaces
• Extra-long cutting edge also for thicker
cables
• Cutting edges: with additional inductive
hardening
• Surface: polished all around and sealed with clear lacquer
• Grip sleeves: PVC, 2x immersed
• Joint: laid in
Cutter:
For cutting soft and extremely hard wires and cables.
• High-quality tool steel ensures long life and precision cutting edges
• Cutting edges: with additional inductive
hardening
• Surface: polished all around and sealed with clear lacquer
• Grip sleeves: PVC, 2x immersed
• Joint: laid on
L3
77 mm
W3
20 mm
T1
11 mm
3
Side Cutters 7” (180 mm) 3.8 mm
W4
4 mm
2.7 mm
08.0037
T2
3 mm
2.2 mm
PANEL POPPER SET
*Individual Panel Poppers NOT sold separately, only as a set.
Description
Panel Popper Set - 11 piece
Art #
071458316
This product is designed to aid in the easy removal of door trim panel, trim fasteners, and mouldings, etc. in any type of vehicle (car, truck, tractor, boats, etc.).
Features
• The tools are designed and manufactured from high quality materials ensuring surrounding trim areas are not damaged when trim is being removed.
• The Panel Poppers are designed to fit a comprehensive set of applications ranging from internal door trims, facia, hand brake gaiters and most other internal & external vehicle trims.
• The Panel Popper Set will fit European,
Japanese and American trim applications and is not vehicle-specific.
08.0038
08.0039
RIVET GUN FOR PLASTIC RIVETS
• Sets most rivets in one stroke without regripping
• Won’t break stem before rivet is set
• Won’t damage painted, plated or easily marred surfaces
Description
Rivet Gun for Plastic Rivets
Art #
19490001
LONG ARM RIVET NUT GUN WITH METRIC MANDRELS
Total installation time 11 seconds!
Includes
4mm, 5mm, 6mm, 8mm and 10mm mandrels
Art #
1917400
Replacement Mandrels
4mm mandrel
5mm mandrel
6mm mandrel
8mm mandrel
10mm mandrel
Replacement Nose Pieces
4mm nose piece
5mm nose piece
6mm nose piece
8mm nose piece
10mm nose piece
Art #
091740201
091740202
091740203
091740204
091740205
Art #
091704206
091704207
091704208
091704209
091704210
08.0040
Description
Rivet Gun for Plastic Rivets
Art #
19490001
LONG ARM RIVET NUT GUN WITH STANDARD MANDRELS
Total installation time 11 seconds!
Includes
8-32, 10-24, 10-32, 1/4"-20, 5/16"-
18 and 3/8"-16 mandrels
Art #
1917300
Replacement Mandrels
8-32 mandrel
10-24 mandrel
10-32 mandrel
1/4"-20 mandrel
5/16"-18 mandrel
3/8"-16 mandrel
Replacement Nose Pieces
8-32 nose piece
10-24/10-32 nose piece
1/4"-20 nose piece
5/16"-18 nose piece
3/8"-16 nose piece
Art #
091704236
091704237
091704241
091704238
091704239
091704240
Art #
091704241
091704242
091704243
091704244
091704245
LONG ARM RIVETER
• The long arms reduce the effort required to set rivets up to 1/4”
• Ideal for auto work, boat building, machine maintenance, etc.
• Supplied with 4 interchangeable noses
• The most powerful hand riveter available
Description
Long Arm Riveter
Art #
0949120
08.0045
RIVET NUT TOOL WITH STANDARD MANDRELS
RIVET NUT TOOL WITH METRIC MANDRELS
A lightweight but rugged tool for installing Rivet-nuts up to 3/8-16 in aluminum and 1/4-20 in steel. US mandrels included are 6-32, 8-32,
10-24, 10-32, 1/4-20, 5/16-18, 3/8-16.
• Sets Rivet-nuts in one stroke
• Clear sleeve for storage
• Easy install and removal
of mandrels
• No fitter and assembler should be without it
Description Art #
Rivet Nut Tool with Standard Mandrels
19175510
Replacement Mandrels
6-32 mandrel
8-32 mandrel
10-24 mandrel
10-32 mandrel
1/4"-20 mandrel
5/16"-18 mandrel
3/8"-16 mandrel
Art #
19176321
19178321
191710241
191710321
191714201
1917516181
191738161
A light weight but rugged tool for installing Rivet-nuts up to 8mm. Metric mandrels included are 3mm, 4mm, 5mm, 6mm, 8mm.
• Sets Rivet-nuts in one stroke
• Clear sleeve for storage
• Easy install and removal of
mandrels
• No fitter and assembler should be without it
Description
Rivet Nut Tool with Metric Mandrels
Replacement Mandrels
3mm mandrel
4mm mandrel
5mm mandrel
6mm mandrel
8mm mandrel
Art #
191755102
Art #
091713
091714
091715
091716
091718
08.0050
ZEBRA FLEX DRIVERS
WURTH AIR WEDGE
• Shaft: Round, flexible
• Drive: For hex head screws
• Head: Bright nickel-plated, interior bore for protruding heads
• DIN 3125
• Use in tight spaces, hose clamps
6
7
8
Socket
Dia. mm
5
Shaft
Length mm
150
150
150
150
Head
Length mm
96
96
106
106
31
35
35
Head
Width mm
31
6"
6"
6"
Overall
Length mm
6"
Art #
061328605
061328606
061328607
061328608
Inflatable lockout wedge
• Slim design, only 1/16” thick deflated, 2-3/4” maximum inflated
• Will not scratch trim pieces or damage paint or glass
• Easy to adjust air pressure by pressing relief button
• Sturdy plastic envelope is tightly sealed and cannot be over-inflated
• Air Pressure: 220-440 psi
• Reinforced man-made material
Description
Air Wedge
Art #
07156780
NOTE: Inflate the Air Wedge with care. WURTH cannot be held responsible for any direct or indirect damages to the user or vehicle.
08.0055
BRAKE FLUID TESTER
6” DIGITAL CALIPER
CRIMP CLAMP TOOL
A handy tester for determining the brake fluid quality (optimized for DOT 4).
For best results, submerge just the tips of the probes into the brake fluid.
Do not submerge the entire probes into the brake fluid, as this may result in false readings.
• 5 LED’s for accurate indication of water content in the brake
fluid in stages of 0%, <1%, approx. 2%, approx. 3%, >4%
• TUV certified for safety
• Robust with protective cap for professional use
• Small and handy, always ready for use
• For use in car, truck and motorcycle workshops and in service areas
• Battery included
Description
Brake Fluid Tester
Replacement Battery
Art #
071553200
071553201
• Does both metric and standard
• Comes with hard plastic carrying case
Description
6" Digital Caliper
Replacement Battery
Art #
07157619
0827085351
08.0060
Description
Crimp Clamp Tool
Art #
154102541
Crimp Clamp Tool can be used on
Ear Clamps
BODY & FENDER DENT PULLING SYSTEM
13 14
By attaching the tension adapters, dents in different materials and surfaces can be pulled out. Subsequent painting of many dents may not be needed.
WURTH Patented Product
9
12
11
2
6
8
10
5
7
3
4
1
Features
• No removal of paint coating - No repainting
(The success of the repair without repainting depends on the quality of the paint and how the product is used)
• No disassembly of the interior trim and no disconnection of the battery - No disassembly/assembly times
• No welding burns on the inner side of the body - No reworking
required
• The low generation of heat allows work even on critical components
Universal application, e.g. on motorcycle fuel tanks, stainless steel containers etc
• The large-surface adapters enable smooth straightening of the dent -
No reworking required compared to spot welding methods
Description
Body & Fender Dent Pulling System
Includes
# Description
1 Slide Hammer
2 Glue Sticks
3 Adapter - round, stiff, yellow
4 Adapter - round, flexible, purple
5 Adapter - oval, stiff, yellow
6 Adapter - oval, flexible, purple
7 Adapter - round, small, blue
8 Lifter for Adapter
9 Spreader - blue
10 Clean Prep
11 Electric Glue Gun
12 Scuff Pads
13 Light Duty Leather Gloves
14 Low Lint Wipes
WURTH Freeze Spray (not included)
Art #
0691500111
Qty
1
Art #
0691500112
0890100057
26
10
10
10
0691500115
0691500116
0691500117
0691500118
10
10
1
0691500121
0691500114
0691500120
2
1
1
08909380
0702100057
3
158544003
1 pair
0899400
50
0899800901
18909902
Notice
Do Not Apply Adapters To Hot Surface.
Application of the Adapters
• Five different tension adapters included in the set enable optimized work on small, large, round or long dents.
• The adapters can be reused and trimmed.
Application on the following materials
• Painted surfaces
• Steel sheet, blank or galvanized
• Stainless steel
• Aluminum
• Sheet gauges from 0.5 to 2mm
Freeze Spray
Art. # 1890 9902
(Sold Separately)
MAXI LIFT
• One hand operation permits hammer work on boundary of dent
• Excellent for roof & trunk repairs
Description
Maxi Lift
Art #
0691500140
Adapter Bolt (sold separately)
0691500141
08.0065
MINI LIFTER KIT
8
6
2 5
1
3
7
4
9
10
Description
Mini Lifter Kit
Art #
0691500252
Includes
#
1
Description
Mini Lifter Tool
In Kit
1
2 Special Glue Stick 10 pcs
3 Adapter Ball Shaped 16 mm
Adapter Ball Shaped 21 mm
4 Adapter Ball Shaped 27 mm
Adapter Ball Shaped 32 mm
5 Contact Feet
6 Wedged Scraper
7 Straightening Cone
8 Light Duty Leather
Gloves
1 pair
1
1
1 pair
9 Cleaning Cloths
Clean Prep
1 pack 75 not included 3
WURTH Freeze Spray not included 3
10 19" Tool Box 1 1
Qty Art #
1
0691500180
10 pcs
0890100050
5 pcs
0691500160
5 pcs
0691500161
5 pcs
0691500162
5 pcs
0691500163
1 pair
0691500156
1
1
07145832
0691500150
1 pair
0899400
0899800901
08909380
18909902
1695590651
The Mini Lifter is especially suitable for repairing small, soft dents on various materials.
Features
• Small, light and very handy, easy to use tool
• The contact feet can be set precisely on the dent so the edge of the dent is not pulled up
• The special swiveling contact feet adapt to any contour for optimal support and gentle treatment of surface finish
• Reverse deformation can be verified by the scale on the tool, assuring controlled reverse deformation of the dent
• Advanced adapters with ball shape and improved bonding surface, assuring best possible work results when repairing small dents
WURTH Patented Product
Note
The adapters Art. # 0691 500154 & 155 also fit the Dent Lifter and
Maxi Lifter. However, the Dent Lifter Art. # 0691 500115-122 cannot be inserted in the Mini Lifter.
08.0070
1/4” ANGLE HEAD DIE GRINDER
• Positive grip - 1/4” capacity collet chuck
• Lever throttle for feathering control
• Compact and Lightweight
• Built-in regulator
• Front exhaust
Specifications
Collet Size
Free Speed
Overall Length
Net Weight
Motor
Air Inlet Thread NPT
Air Hose I.D. Size
Average Air Consumption
Air Pressure
Sound Pressure
Sound Power
1/4”
20,000 rpm
5”
1 lb.
1/3 hp
1/4”
3/8”
3 cfm
90 - 120 PSI
92.3 dB(A)
103.7 dB(A)
Description
1/4" Angle Head Die Grinder
Art #
1703000875
PNEUMATIC IMPACT WRENCH WITH 1/2” DRIVE
Reliable, powerful impact wrench with fast torque buildup. Recommended maximum bolt size: M15. Ideal for changing tires.
• Rugged and well-balanced unit featuring an aluminum housing - long service life and optimum center of gravity
• Rubber-coated and ergonomically-shaped handle, user-friendly clockwise/counterclockwise switching and adjustable trigger - the handle does not become cool during work
• High-quality pin impact mechanism in oil tank with six-vane motor - increased service life thanks to constant lubrication
• Nearly vibration-free
• 3-year warranty on manufacturing and material defects
Technical data
Type
Square drive
Working torque*
Max. releasing torque in Nm in Nm
Avg. operating pressure in bar
Weight in kg
Dimensions (L x W x H) in mm
Avg. air consumption in L/min
Connection thread
Minimum hose dia.
Sound pressure level in inches in mm in db(A)
DSS 1/2" H
1/2"
70 - 470
569
6.3
2.3
195 x 64 x 202
102
1/4"
8
92
* The working torque is the torque usually achieved under average working conditions. It depends on the highly varying ambient conditions (air pressure, hose diameter, soiling etc.).
The reversing piston and the four tightening torque stages can be operated with one hand and enable optimum adaptation to the task at hand.
08.0075
Description
Pneumatic Impact Wrench with 1/2” Drive
Art. #
07037360
PNEUMATIC IMPACT WRENCH WITH 1” DRIVE
AND 6” LONG SHAFT
Very rugged and powerful impact wrench with long drive square. Ideal for service work on trucks and buses, as well as on construction and agricultural machines.
• Rugged aluminum housing - Long service life.
• Ergonomically shaped handle, 360°- rotatable additional handle, user-friendly clockwise/counterclockwise switching and adjustable trigger
• High-quality double hammer striking mechanism - relatively low air consumption despite the dependable maximum power values and long service life
• 3-year warranty on manufacturing and material defects
Description
Pneumatic Impact Wrench with 1” Drive and 6” Long Shaft
Art. #
07037800
Square drive
1"
Working torque* in Nm
Max. loosening torque in Nm
996 – 1,870 2,440
Avg. operating pressure in bar
6.3
Weight in kg
10.93
Dimensions
(L x W x H) in mm
Avg. air consumption in L/min.
512 x 109 x 188 370
Connection thread in inches
1/2"
Minimum hose dia. in mm
11
* The working torque is the torque usually reached under average working conditions. It is dependent on the highly variable ambient conditions (air pressure, hose diameter, soiling etc.).
Sound pressure level in dB(A)
95
360°- rotatable additional handle Through-hole for locking pin in 1" square 360°- rotatable air inlet
The clockwise/counterclockwise switching and the four tightening torque levels enable optimum adaptation to the respective application.
2
3
Level
1
4
Tightening torque in Nm, approx.
996
1,355
1,518
1,870
08.0076
360°- rotatable air outlet on the bottom of the pneumatic impact wrench. The exhaust air can be expelled in the desired direction.
EXHAUST MANIFOLD REPAIR KITS
Designed to assist in the removal and subsequent replacement of broken exhaust manifold mounting studs/bolts in a variety of domestic light and commercial truck
(pick-ups, vans, etc.) engines.
• 2-year manufacturer’s defect warranty
• Made in the USA
See the following pages for details on specific Exhaust
Manifold Repair Kits
Features
• CNC machined Precision Jig Plate reduces time for stud removal by 60%.
Precision Jig Plate alignment of +/-0.003” of stud center significantly reduces probability of cylinder head damage.
• Can be mounted in any of eight positions to reach every stud.
• Includes:
- Precision Jig Plate
- Machine Tooling Bit - 1/8”
(Art #1715018)
- Deburring Tool Assembly
(Art #17151000)
- Screw Extractor -Standard
(Art #17154000) – Ford Gasoline &
Dodge Gasoline Kits
- Screw Extractor – Heavy Duty
(Art #17154001) – GM Inline/V8 &
Ford Diesel Kits
- Precision Mounting Fastener – 8mm
(Art #17152000) – Ford Gasoline/Diesel,
GM Inline, & Dodge Gasoline Kits
- Precision Mounting Fastener – 10mm
(Art # 17152000) – GM V8 Kit
- Precision Alignment Pin
(Art # 17153000) – Ford Gasoline/
Diesel & Dodge Gasoline Kits
- Drill Chuck
- Drill Chuck Key
- Heavy-Duty Blow Molded Protective Case
- User Manual
EXHAUST MANIFOLD REPAIR KIT - FORD GASOLINE
Description
Exhaust Manifold Repair Kit - Ford Gasoline
Art #
1715100
Vehicle Applications
Ford F-Series Pickups, Super Duty Trucks, Econoline Vans, Explorer
®
, Expedition
®
, Excursion
®
, and Ford
Drive Chassis – including Recreational Vehicles.
08.0077
Engine Applications
Ford Gasoline 4.2L, 4.6L, 5.4L, and 6.8L.
EXHAUST MANIFOLD REPAIR KIT - FORD DIESEL
Description
Exhaust Manifold Repair Kit - Ford Diesel
Art #
1715200
Vehicle Applications
Ford F-Series Pickups, Super Duty Trucks, Econoline Vans, Excursion
®
, and Ford Drive Chassis – including Recreational Vehicles.
Engine Applications
Ford Diesel 6.0L and 6.4L.
EXHAUST MANIFOLD REPAIR KIT - GM INLINE
Description
Exhaust Manifold Repair Kit - GM Inline
Art #
1715300
Engine Applications
General Motors Inline 2.8L, 3.5L, 3.7L, and 4.2L.
Vehicle Applications
GM/GMC - Trailblazer
®
SUV, Canyon
®
and
Colorado
®
Pickup, and HUMMER
®
.
08.0078
EXHAUST MANIFOLD REPAIR KIT - GM V8
Description
Exhaust Manifold Repair Kit - GM V8
Art #
1715400
Vehicle Applications
GM/GMC/CADILLAC Silverado and Sierra Pickups, Vans, Escalade
®
, Suburban
®
, Yukon
®
SUVs,
HUMMER
®
, and GM Drive Chassis – including Recreational Vehicles.
Engine Applications
General Motors V8 4.8L, 5.3L, 5.7L, 6.0L, and 6.2L.
EXHAUST MANIFOLD REPAIR KIT - DODGE HEMI® GASOLINE
Description
Exhaust Manifold Repair Kit - Dodge HEMI
®
Gasoline
Art #
1715500
Vehicle Applications
Dodge Ram
®
Pickup, Dodge Drive Chassis – Challenger
®
and Charger
®
, and Durango
®
SUV.
Engine Applications
Dodge HEMI
®
5.7L.
08.0079
EXHAUST MANIFOLD REPAIR PARTS - MACHINE TOOLING DRILL BITS
These precision commercial machine shop duty drill sets are machine turned on a lathe for a fast and effective drilling operation - not made by crimping and grinding like most bits. Extremely accurate in both length and diameter with tolerances exceeding 10X those of other high quality drill bits. Drilling up to RC50 hardness, the Würth Machine Tooling Drill Bits will cut through most bolts/studs encountered in most gasoline or diesel engines.
Features
• Commercial Machine Shop
Duty, +/- 0.0005” diameter
tolerance
• Machine turned for accuracy and repeatability
• Solid Cobalt
• Double Fluted
• Micro point
• 135 degree cutting
• 57 degree secondary point
• Made in the USA
For use with all Exhaust Manifold Repair Kits
Description
Machine Tooling Drill Bit – 1/8”
Machine Tooling Drill Bit – 3/16”
Machine Tooling Drill Bit – 17/64”
Usage
Standard replacement for all kits.
Used in extreme corrosion applications where application may warrant a larger stud extractor.
Used in extreme corrosion applications for nearly complete removal of stud remnants (after use of the 3/16” machine tooling drill bit). Helps to preserves cylinder head thread if used properly.
Qty. Dia.
3 0.1250”
Length Art #
1.875”
1715018
2 0.1875” 2.250”
17150316
1 0.2656” 2.200”
171501764
EXHAUST MANIFOLD REPAIR PARTS - DEBURRING TOOL ASSEMBLY
Broken exhaust studs unwind during fracture like a coil spring, leaving behind a burr that acts like a lock washer, lodging the remnant into the head. This increases the complexity of the repair and often leads to a broken stud extractor. This precision tool quickly removes the burr, cleans both the stud and tapped hole in just four seconds.
Description
Deburring Tool Assembly
Art #
17151000
08.0080
EXHAUST MANIFOLD REPAIR PARTS - PRECISION MOUNTING FASTENERS
Precision turned stainless steel hexagonal fasteners are engineered to ensure accurate alignment of the Exhaust Manifold Repair Kits.
No.
Description
1
Precision Mounting Fasteners – 8 mm
Usage
For use with Ford gasoline/diesel, Dodge gasoline, & GM inline kits.
2
Precision Mounting Fasteners – 10 mm For use with GM V8 kits.
2
Qty. Art #
2
17152000
17152001
1
2
EXHAUST MANIFOLD REPAIR PARTS - PRECISION ALIGNMENT PIN
For use with Ford gasoline/diesel & Dodge gasoline kits (not for GM kits)
Used when only one Precision Mounting Fastener can be used for mounting as a result of multiple damaged studs. The Precision Pin is precision CNC turned out of solid stainless steel. Simply place the Precision Pin over a damaged stud, tighten the Precision Mounting Fastener and the device will accurately align the tool for easy drilling operation.
Description
Precision Alignment Pin
Art #
17153000
EXHAUST MANIFOLD REPAIR PARTS - SCREW EXTRACTORS
Use in combination with Machine Tooling Drill Bit – 1/8” (Art # 1715018) for applications where higher torque is required for removing case hardened exhaust manifold studs.
No.
Description
1
Screw Extractor – Standard
2
Screw Extractor – Heavy Duty
Usage
For use with Ford gasoline &
Dodge gasoline kits.
For use with Ford diesel, GM inline, & GM V8 kits.
Art #
17154000
17154001
08.0081
1
2
VARIO DRILL
Description
Vario Dril
Art #
1703090
Features
• For fast and easy removal of spot welds
• Contact pressure frame can be turned 360º and prevents slip-off. It enables easy working even in inaccessible places.
• Contact pressure frame can be assembled quickly without additional tools
• Cutting depth is infinitely variable and is not effected by the contact pressure frame
• Only use original HSCO weld point cutters
• 1 year warranty
Specifications
Speed
Air Pressure
Weight
Air Consumption
1,300 rpm
6 to 8 bar
Approx. 4 lbs.
250 l/min.
Set Includes
Vario Drill VD 90
Hex Head Socket
Cobalt Cutter 6mm
Cobalt Cutter 8mm
Cobalt Cutter 9mm
1
3
1
Qty.
1
1
08.0084
VARIO POINT CUTTERS
Titanium HSCO/TIN
• No need for center-punching
• Service life enhanced by a factor of between 2 and 3
• High cutting speed
• Cobalt with Titanium-Nitride coating
Diameter
6 mm
8 mm
9 mm
Length (A)
44.7 mm
Art #
0710606
0710808
0710909
Shaft Length (B)
17 mm
Shaft Dia. (C)
7.5 mm
Cobalt HSCO
• No need for center-punching
Size
6 mm
8 mm
9 mm
Length (A)
44 mm
Art #
071060
071080
071090
Shaft Length (B)
16 mm
Shaft Dia. (C)
7.5 mm
Spottle Gun Cobalt HSCO
• No need for center-punching
Size
8 mm
Art #
0710081
Length (A)
38 mm
Shaft Length (B)
10 mm
Shaft Dia. (C)
7.5 mm
08.0085
8.0MM X 80MM HSCO BIT
Features
• High Speed Steel/Cobalt (HSCo) alloy
• Center Nib
• Use with any chuck type drill
• Operate at max. 1800 RPM
Designed for efficient removal of spot welds in high strength steel. High speed steel allows for faster cutting speeds and the Cobalt alloy helps maintain the hardness at higher temperatures. The centering nib helps start and set the bit. The flat lip angle of the tip ensures strong support for the cutting edge.
Description
8.0mm x 80mm HSCo Bit
Art #
07108800
8.0MM X 80MM HSCO TIN BIT
Features
• High Speed Steel/Cobalt
(HSCo) alloy with Titanium
Nitride (TiN) coating
• Coating extends cutting life
• Center Nib
• Use with any chuck type drill
• Operate at max. 1800 RPM
The high speed steel and cobalt (HSCo) alloyed drill bit is coated with a layer of titanium nitride (TiN), a very hard ceramic material giving the bit it’s golden color. This heat resistant coating can extend the cutting life by three or more times, and cannot be properly sharpened, as the new edge will not have the coating provided.
Description
8.0mm x 80mm HSCo TiN Bit
Art #
07108801
08.0086
For High Strength Metals Such As Boron
• Suitable for Vario Drill
Size
8 mm
Art #
07108080
Length (A)
44 mm
Shaft Length (B)
22 mm
Shaft Dia. (C)
7.5 mm
For High Strength Metals Such As Boron
• Suitable for drills with pneumatic advance (screw -nail drill)
Size
8 mm
Art #
07108081
Length (A)
44 mm
Shaft Length (B)
22 mm
Shaft Dia. (C)
7.5 mm
Tips to enhance the lifespan of the weld point cutter:
• The cutter should have reached its maximum speed prior to contact with the workpiece
• Set the centering point gently down on the sheet, the drill swiftly with even pressure
• Wherever possible, we recommend using a contact pressuredevice
8.0MM X 45MM BORON STC BIT (TRI-FLUTE)
Features
• Tungsten-Carbide
• Triple Fluted
• Friction-Free
Multi-layered Coating
• For Boron Steel,
UHSS & Usibor
• Operate at 1000 RPM
The Boron STC drill bit, made from tungsten-carbide, is designed specically for use on spot welds made for boron steel with tensile strength from 450N/ mm2 - 1.580N/mm2. Triple fluted to spread the torque forces over a greater area, and special multi-layer coating is applied to help reduce friction.
Description
8.0mm x 45mm Boron STC Bit
Art #
07108090
08.0087
MINI 3” AIR COMPOSITE POLISHER KIT
Exhaust
Speed Control
Description
Mini 3" Air Composite Polisher Kit
Technical Data
Spindle Size
5/16”-24T
Free Speed
2100 RPM
Art #
0703999012
Air Hose Size
(Inner Dimension) Air Pressure
3/8” (10mm) 90-120 psi
Average Air
Consumption
3.5 cfm
Features
• Compact lightweight tool permits polishing in
hard to reach areas
• Powerful 0.45 hp direct drive bring all the
power to the work area
• Composite body is durable and resistant
to chemicals
• Speed Control gives you power adjustments
on demand without the need of air regulator
• Low RPM start via speed control ensures there
are no surprise starts
• Exhaust valve at the base of the handle
ensures disturbance free work area
• Ergonomically designed pistol grip handle
provides extra control of movement and
user comfort
Included in kit:
(1) 3” Air Composite Polisher
(1) 3” Velcro Backing Pad with Female Threads
(1) Spanner Wrench
(1) Blow molded case for easy storage and
transport of tool and polishing pads
Polishing Pads sold seperately (see below)
Length
5.3” (135mm)
Net Weight
1.70 lbs. (0.77 kg)
MINI POLISHING PADS
For use with the Mini 3" Air Composite Polisher
Description Art #
3.5" Top Wool Polishing Pad
05852485
Description Art #
3.5" Soft Foam Polishing Pad
05853085
Description
3.5" Spider Polishing Pad
Art #
05852985
08.0090
ELECTRIC POLISHER
Easy to use polishing machine which includes a D-Handle and a Straight handle which can be attached on either side of the machine to accommodate both left and right handed technicians. The variable speed motor can go from 0-3000 rpm and can be controlled with the trigger switch so that the operator can control the amount of cut and polishing that the machine will output. The 11 Amp motor is strong enough for deep polishing jobs without the machine losing speed.
Features
• 3000 RPM, 11 Amp Motor
• 120V, 60 Hz
• Adjustable dial speed control
• Lock-on switch for comfort during extended
use
• Auxiliary handle mounts either side for left or right-hand use
Backing and pads sold separately
Specs
Amps
Weight
Arbor
11
7 lbs (3.175 kg)
5/8” - 11 UNC
Includes • D-Handle
• Straight Handle
• Spanner Wrench
• Polishing Pad Arbor
• Hex Key
Description
Electric Polisher Set
Art #
0702999050
A B C D E
D
E
B
C
Set Includes
A
D-Handle
Straight Handle
Polishing Pad Arbor
Spanner Wrench
Hex Key
1
1
1
1
Qty
1
08.0091
NUT BUDDY
Description
WURTH Nut Buddy
Art #
071415000
The WURTH Nut Buddy is an innovative, easy-to-use tool that allows for breaking loose even the most stubborn wheel lug nuts and bolts. It’s designed to be used on commercial or agricultural vehicle wheels.
Using a 58:1 gear ratio, the WURTH Nut
Buddy multiplies hand cranking force by 58 times, making old, rusted and seized lug nut and bolt removal easier than ever before!
What’s Included
• Heavy-duty plastic molded carrying / storage case
• WURTH Nut Buddy tool
• Cranking handle
• Connection rod (1:1 ratio)
• Two sockets: 1-5/16” (33 mm) and
1-1/2” (38 mm)
• Instruction / component sheet
Note: These components are not available for individual purchase.
1 Year Warranty
Please note: This tool is specifically designed to be used by hand only!
Using a pneumatic or power wrench to crank the tool will cause damage to its internal components which will void the warranty.
Specifications
Tool Gear Ratio
Tool rated torque output
Tool Dimensions (approx.)
Overall length
Shaft length
Major shaft diameter
58:1
2,950 ft lb
(4,000 Nm)
14”
12”
3”
08.0092
AUTO NUT BUDDY
Description
Auto Nut Buddy
Art #
071415001
Although the Auto Nut Buddy comes with 3 chrome vanadium sockets, consider using the following to protect expensive wheels from socket scratches:
Plastic Lined
Lug Sockets
Wrench Size
3 pc. Set
Set Includes:
17 mm
19 mm
21 mm
Plastic Cover
Art #
0713132890
0713132817
0713132819
0713132821
0713132891
08.0093
Like the original Würth Nut Buddy, the
Auto Nut Buddy allows for breaking loose, stubborn wheel lug nuts and bolts, but is specifically designed for car and light truck lug nuts.
Using an 18:1 gear ratio, the Würth Auto
Nut Buddy multiplies hand cranking force by 18 times, making old, rusted and seized lug nut and bolt removal on cars and light trucks easier than ever before!
The Auto Nut Buddy tool and cranking handle are made of stainless steel and come with 3 chrome vanadium 1/2” sockets
(17mm, 19mm, & 21mm).
What’s Included
• Heavy-Duty Plastic Molded Carrying /
Storage Case
• Cranking Handle (features a 1/2” drive for
1:1 ratio hand tightening/loosening)
• 3 Chrome Vanadium 1/2” Sockets
(17mm, 19mm, 21mm)
• Würth Auto Nut Buddy Tool
• Instruction/Component Sheet
Note: Components are not available for individual purchase.
1 Year Manufacturer Defect Warranty
Important Notes:
• This tool is specifically designed to be used by hand only! Using a pneumatic or power wrench to crank the tool will cause damage to its internal components which will void the warranty.
• It is recommended not to use a length extender on the hand crank as it may cause damage to the lug
nuts.
Specifications
Tool Gear Ratio
External Drive
18:1
1/2”
Package Dimensions (approx.) 11” x 9” x 3”
Total Weight 5.75 lbs.
Max. Torque 850 ft. lb.
(1,152 Nm)
REFLECTIVE WINCH STRAP
The 30 Foot Reflective Wurth Winch Strap is a rugged, commercial duty replacement strap for flatbed trailer cargo operations. Attach to winch tensioner on side of trailer. Engineered with ultra heavy-duty polypropylene webbing. Safe work load of 5,000lbs. Excellent security for traveling long distances.
Applications include lumber, construction & farm equipment and supplies, oversized building materials, hay bales, oversized storage tanks. Note: this strap is not designed for lifting.
Commercial duty winch strap.
Features
• High capacity flatbed strap designed for commercial duty cargo transport
• Reflective, yellow industrial grade webbing for enhanced visibility and greater safety
• Long 30 foot length for going over tall cargo
• Heavy duty plated steel flat hook
Specs
• Yellow Strap Color
• Woven Polypropylene
• Reflective Threads
• Black Coated Steel Flat Hook
• 30 Ft. Strap Length
• 4” Strap Width
• 5,000 Lb. Safe Work Load
• 15,000 Lb. Break Strength
• 1 per package
Description
30 ft. x 4” 15,000 lb. Reflect Winch Strap - 2 per package
Art #
0713922233
10 FT. REFLECTIVE RATCHET STRAPS
The 10 Foot Reflective Wurth Ratchet Strap is a performance ratcheting tie down strap that can be used for light to medium duty applications. Perfect for strapping down smaller cargo weighing less than 1,000lbs. For small to medium sized loads often hauled in a large pickup truck, van, box truck or on a medium trailer. This includes tool boxes, ladders, boxes, trunks, tires, pallets, building materials, plumbing pipe, spools of cable and hose, small engine blocks, lawn mowers, smaller equipment and machines, welding tanks, air compressors, air conditioners, fencing, small trees, filing cabinets, furniture, appliances, ATVs, motorcycles, jet skis, snow mobiles, etc.
Stronger & more user friendly than standard ratcheting tie downs!
Features
• Reflective, industrial grade webbing for enhanced visibility and greater safety
• Ergonomic, flared “Power Grip” handles for maximum leverage
• Aluminum rails won’t rust
• Sewn-in, “Soft-Tie” loop secures cargo without scratching paint or chrome
• Overmolded, sturdy release pawl prevents malfunction
• Large head hex bolts protect axle
• Super strong coated steel hooks
• SmartWeb™ technology provides webbing that is stronger and more abrasion resistant than standard webbing
Description
10 ft. 3000 lb. Reflect Ratchet Strap - 2 per package
Specs
• Orange Strap Color
• Woven Polypropylene
• Reflective Threads
• Black Coated Steel Closed-End S-Hooks
• 10 Ft. Strap Length
• 1-1/4” Strap Width
• 1,000 Lb. Safe Work Load
• 3,000 Lb. Break Strength
• 2 per package
Art #
0713922230
08.0094
14 FT. REFLECTIVE RATCHET STRAPS
The 14 Foot Reflective Wurth Ratchet Strap is a performance ratcheting tie down strap that can be used for heavy duty to commercial duty applications. Perfect for strapping down medium sized cargo weighing less than 1,667lbs. For heavier loads often hauled in an extra-duty pickup, box truck or on a large trailer or flatbed. Excellent security for traveling longer distances. Applications include UTVs, small to medium tractors, construction & farm equipment, large engine blocks, storage tanks, water tanks, hot water heaters, heavier building materials, etc. Can secure signs, equipment, boats, aircrafts, shelters, canopies and banners to the ground.
Features
• High capacity tie downs designed for heavy duty cargo transport
• Reflective, yellow industrial grade webbing for enhanced visibility and greater safety
• Longer length for going over tall cargo
• Ultra padded handle with over-molded release pawl for extra grip strength
• Heavy duty welded and plated steel double
“J” hooks
• Corrosion resistant plating on ratchet for a long service life
• Hex bolt helps protects ratchet mechanism
Specs
• Yellow Strap Color
• Woven Polypropylene
• Reflective Threads
• Clear Zinc Coated Steel Claw Hooks
• 14 Ft. Strap Length
• 1-1/2” Strap Width
• 1,667 Lb. Safe Work Load
• 5,000 Lb. Break Strength
• 2 per package
Commercial duty padded ratchet tie down.
Description
14 ft. 5000 lb. Reflect Ratchet Strap - 2 per package
Art #
0713922231
30 FT. REFLECTIVE RATCHET STRAP
The 30 Foot Reflective Wurth Ratchet Strap is a performance ratcheting tie down strap that can be used for demanding commercial duty applications. Engineered for large and heavy loads often hauled on a large trailer or flatbed. Cargo should weigh less than 3,333lbs. Excellent security for traveling long distances. Applications include construction & farm equipment and supplies, oversized building materials, tractors, hay bales, oversized storage tanks. Can secure equipment, boats, aircrafts and shelters to the ground.
Features
• High capacity tie downs designed for commercial duty cargo transport
• Reflective, yellow industrial grade webbing for enhanced visibility and greater safety
• Long 30 foot length for going over tall cargo
• Ultra padded handle with over-molded release pawl for extra grip strength
• Heavy duty welded and plated steel double “J” hooks
• Corrosion resistant plating on ratchet for a long service life
• Hex bolt helps protects ratchet mechanism
Commercial duty padded ratchet tie down.
Specs
• Yellow Strap Color
• Woven Polypropylene
• Reflective Threads
• Clear Zinc Coated Steel Claw Hooks
• 30 Ft. Strap Length
• 2” Strap Width
• 3,333 Lb. Safe Work Load
• 10,000 Lb. Break Strength
• 1 per package
Description
30 ft. 10,000 lb. Reflect Ratchet Strap
Art #
0713922232
08.0095
ADJUSTABLE TARP STRAP
The 34 Inch Adjustable Tarp Strap is a black 100% EPDM rubber strap designed for light duty tie down applications. Excellent for securing tarp covers. The straps come packaged as a 5 pack. This strap is unique compared to standard tarp straps in that it has oval holes cut in the strap, allowing for a range of length adjustability. The workable strap length can be adjusted from 4” to 34” just by changing the
S-hook location. The EPDM rubber construction allows for outstanding temperature, UV, ozone and weather resistance – they will not lose their elasticity, no matter what the season. High quality EPDM formula has a low odor and won’t bloom. Each end of the strap has a rust resistant, zinc plated steel
S-hook for easy fastening. Hooks won’t lose their shape. The strap can safely be extended to 50% of its original length (51” total extended length). Primarily used for securing tarps, covers, banners and canopies. Other applications include securing small boxes, buckets, tubs, and other cargo to prevent from shifting, securing trash can lids, securing and straightening saplings and small trees, etc.
Specs
• Black Strap Color
• EPDM Rubber
• Clear Zinc Coated Steel S-Hooks
• 34 in. Strap Length
• 51 in. Max. Ext. Length
• 5 per package
Packaged as a 5 pack, NOT sold individually
Description
34” Adjustable Tarp Strap - 5 per package
Art #
0880240170
BUNGEE STRAP
The Wurth Adjustable Bungee Cords are constructed of high quality, flexible rubber bungee threads.
These are protected by a double layer woven polypropylene cover for better wear resistance and UV protection. These versatile straps are adjustable, with the dark green strap having a range 16-24” and the yellow strap having a range of 28-48”. Very convenient and easy to use. Adjust the length and tension with a simple tug. Eliminates the need to carry multiple lengths of bungee. Both these bungee cords can safely be extended to 50% of their original length (dark green 24-36” / yellow
42-72”). Engineered to be at least twice as strong as standard stretch cords. Overmolded steel core hooks won’t lose their shape or scratch cargo. Intended for light duty applications including securing small boxes, buckets, tubs, small tool boxes and other cargo to prevent from shifting. Securely bundles small quantities of wood, pipes, tubing, etc.
Features
• Dk Green/Yellow Strap Color
• Rubber Bungee Threads w/
Protective Threaded Nylon
• Black Heavy Duty Molded
Plastic w/Steel Core Hooks
• Dk Green (16-24”)/
Yellow (28-48”) Strap Length
• Dark Green (24-36”)/Yellow
(42-72”) Max. Ext. Length
• 5 per package
(3 Dark Green/2 Yellow)
Packaged as a 5 pack (3 dark green & 2 yellow straps). They are NOT sold individually
Description
Bungee Strap - 5 per package (3x 16-24”/2x 28-48”)
Art #
0880240160
08.0096
BACKING PADS
Backing Pads
6" Velcro Back
6" Velcro Back
6" Self Adhesive Back
6" Self Adhesive Back
Holes
6 holes
No holes
6 holes
No holes
Art #
0586960001
0586960004
0586960101
0586960104
08.0097
DBS 3600
New and Improved!
Special material with heat treatment on entire wire -for longer life.
Rubber saftety flap for improved protection during use.
Stronger structure design on the rubber eraser offers better stability and longevity (eraser for water based paint is also now available).
Description
DBS 3600 Kit
Description
DBS 3600 Brush Grinder (1)
Adaptor - 11mm (1)
Adaptor - 23mm (1)
Holder for black strip wheel double (1)
Holder for black strip wheel single (1)
11mm Fine Brush (1)
23mm Fine Brush (1)
11mm Coarse Brush (1)
23mm Coarse Brush (1)
Rubber Eraser (1)
Rubber Eraser - Water Based Paint (1)
Black Strip Wheel (2)
Art #
07033601
Art #
07033600
070336021
07033602
070336022
070336023
070335031
17033503
070335051
17033501
158591
058596
05851100
Tighter contacting between the wire brush and adaptor - no bending wire while in use.
Single and double wheel are both available for applications.
Thumb-activated for better control.
Professional rubber-coated handle grip for comfort and less vibration.
Special treatment on the bevel gear for more stablity and longer lifetime.
See section 06 (Body Shop) for more details.
08.0100
NIPPLE INTERCHANGE CHART - COUPLER
1/4" Lincoln Long Nose Series Type "A"
Description
Male 1/4" NPT
Steel
Female 1/4"
NPT Steel
AMFLO Milton Truflate NAPA Lincoln Foster Art #
C27 790 13-424 90-645 N/A LN3103
169960014
C28 N/A 13-434 90-644 815 LN3003
169971014
1/4" ARO Series Type "B"
Description
Male 1/4" NPT
Steel
Female 1/4"
NPT Steel
Economy Female
1/4" NP Brass
AMFLO Milton Truflate NAPA Lincoln Foster Art #
C37 N/A 13-324 90-614 N/A 210-
3103
169967014
C38 N/A 13-334 90-612 862 N/A
169967114
C38B N/A N/A N/A N/A N/A
1699941406
1/4" Automotive Standard Series Type "C" Truflate
Description
Male 1/4" NPT
Steel
AMFLO Milton Truflate NAPA Lincoln Foster Art #
C1 786 13-125 90-610 N/A TF3103
169961014
Female 1/4"
NPT Steel
C2 785 13-134 90-600 N/A TF3003
169961114
3/8" Automotive Standard Series Type "G"
Description AMFLO Milton Truflate NAPA Lincoln Foster Art #
Female 1/4"
NPT Steel
C8 1803 13-610 90-686 N/A TF4004
169962114
Female 3/8"
NPT Steel
C6 1805 13-612
90-654 N/A
1/2" Automotive Series Type "F"
Description
TF4204
169962138
AMFLO Milton Truflate NAPA Lincoln Foster Art #
Male 1/2" NPT
Steel
C9 1816 13-704 90-664 651008 5305
169963012
Female 1/2"
NPT Steel
C10 1815 13-712 90-662 652008 5205
169963112
08.0105
NIPPLE INTERCHANGE CHART - COUPLER (CONTINUED)
1/4" Industrial Series Type "D" Milton
Description
Male 1/4" NPT
Steel
Female 1/4"
NPT Steel
Economy Female
1/4" NPT Brass
Female 3/8"
NPT Steel
AMFLO Milton Truflate NAPA Lincoln Foster Art #
C21 716 13-224 90-672 611004 3103
169964014
C20
C20B
715
N/A
C20-23 718
13-234 90-670 612004 3003
N/A N/A
13-236 N/A
N/A N/A
612006 3203
169964114
1699941405
169964138
Hose Barb 1/4"
Steel
C20-42 N/A N/A N/A N/A N/A
169964214
Hose Barb 3/8"
Steel
C20-44 N/A N/A N/A N/A N/A
169964238
3/8" Industrial Series Type "E"
Description AMFLO Milton Truflate NAPA Lincoln Foster Art #
Male 3/8" NPT
Steel
C25 1836 13-526 90-682 641006 4304
169965038
1/4" Diamond-U Series
Description
Male 1/4" NPT
Steel
AMFLO Milton Truflate NAPA Lincoln Foster Art #
C31 N/A N/A N/A N/A N/A
169970014
08.0110
NIPPLE INTERCHANGE CHART - NIPPLE
1/4" Lincoln Long Nose Series Type "A"
Description
Male 1/4" NPT
Steel
Female 1/4"
NPT Steel
AMFLO Milton Truflate NAPA Lincoln Foster Art #
CP27 791 12-424 90-648 11659 LN10
1699921409
CP28 792 12-434 90-650 11661 LN11
1699092014
1/4" ARO Series Type "B"
Description
Male 1/4" NPT
Steel
Female 1/4"
NPT Steel
AMFLO Milton Truflate NAPA Lincoln Foster Art #
CP37 777 12-324 90-618 13329 210-10
169992114
CP38 778 12-334 90-620 13331 210-11
169993114
1/4" Automotive Standard Series Type "C" Truflate
Description
Male 1/4" NPT
Steel
Male 3/8" NPT
Steel
AMFLO Milton Truflate NAPA Lincoln Foster Art #
CP1 783 12-124 90-626 N/A TF10
1699013452
CP1-03 N/A N/A N/A N/A N/A
1699013038
Female 1/4"
NPT Steel
CP2 784 13-134 90-600 N/A
3/8" Automotive Standard Series Type "G"
Description
TF11
1699013402
AMFLO Milton Truflate NAPA Lincoln Foster Art #
Male 1/4" NPT
Steel
CP7 1809 12-602 90-685 N/A TF40
1699023014
Male 3/8" NPT
Steel
CP5 1807 12-604 90-658 N/A TF42
1699023038
Female 3/8"
NPT Steel
CP8 1810 12-610 90-687 N/A TF41
1699022014
1/2" Automotive Series Type "F"
Description AMFLO Milton Truflate NAPA Lincoln Foster Art #
CP17 1817 12-704 90-666 630204 54-5
1699063012
Male 1/2" NPT
Steel
Female 1/2"
NPT Steel
CP18 N/A N/A N/A N/A N/A
1699062012
08.0115
NIPPLE INTERCHANGE CHART - NIPPLE
1/4" Industrial Series Type "D" Milton
Description
Male 1/4" NPT
Steel
Female 1/4"
NPT Steel
AMFLO Milton Truflate NAPA Lincoln Foster Art #
CP21 727 12-224 90-674 630104 10-3
16999214
CP20 728 12-234 90-676 630204 11-3
16999314
Female 3/8"
NPT Steel
Hose Barb 1/4"
Steel
CP20-
23
CP21-
42
732
N/A
N/A
N/A
N/A
N/A
630106 15-3
N/A N/A
16999238
1699040014
Hose Barb 3/8"
Steel
CP21-
44
N/A N/A N/A N/A N/A
1699040038
3/8" Industrial Series Type "E"
Description
Male 1/4" NPT
Steel
AMFLO Milton Truflate NAPA Lincoln Foster Art #
CP25-
02
1839 N/A N/A 640104 40-4
1699053014
Female 1/4"
NPT Steel
CP25 1837 12-526 90-683 640106 42-4
1699102014
IDENTIFICATION CHART - 1/4” COUPLERS
INDUSTRIAL AUTOMOTIVE ARO
LINCOLN DIAMOND-U
08.0120
IDENTIFICATION CHART - 1/4” PLUG
INDUSTRIAL AUTOMOTIVE
LINCOLN
DIAMOND-U
IDENTIFICATION CHART - MALE, FEMALE & HOSE BARB
ARO
C21
CP1
MALE
C20
CP10
FEMALE
C20-44
CP21-44
HOSE BARB
08.0125
SWING AIR COUPLER
• Safely connect and disconnect under pressure
• In accordance with ISO 6150, safety standard ISO 4414 and MILC
4109
• Full flow
• Easy to operate, easy to clean
• Compact design with few individual parts
• Ergonomic design, quality engineered
• Simultaneous venting reduces the dangerous whiplash effect
• Partly covered coating for protection
Use with:
Milton Short Nipple
Milton Long Nipple
Art #
069996141
0699961141
CONNECT SWING FULL FLOW
WURTH COUPLERS
• Made from a polyamide composite material, inside and out, that is stronger than brass and steel
• Designed to withstand high impact and repetitive motion
• Materials are guaranteed against defects in workmanship and have a 1 year no leak warranty under normal working conditions
Description
Safety 1/4" NPT Female
Standard 1/4" NPT Female
Use with:
1/4" Industrial Type "D"
Milton Nipple Profile
1/4" Industrial Type "D"
Milton Nipple Profile
Art #
169992001
169992002
Safety 1/4" NPT Female
08.0130
Standard 1/4" NPT Female
HIGH FLOW QUICK DISCONNECT COUPLER & NIPPLES
• Extremely high flow capacity, 74.1 CFM at 87 PSI
• Easy one hand assembly and disassembly
• One way shut-off
• Especially suitable for HVLP paint guns
Description
1/4" Coupler
1/4" Male Nipple
1/4" Female Nipple
Art #
169994014
169992014
169993014
SAFETY AIR COUPLER - TRUFLATE
Description
1/4" NPT Female
Use with:
Truflate Nipple Profile
Art #
169992201
BLUE PUSH BUTTON COUPLER
Description
1/4" NPT Female
1/4" NPT Female
Use with:
Industrial Nipple Profile
ARO Nipple Profile
Art #
0699714
0699715
UNIVERSAL COUPLER
• Easy, one hand assembly/disassembly
• High flow capacity
• Heavy duty, made in Sweden
Description
1/4" NPT Female
3/8" NPT Female
Art #
169994141
169994381
08.0135
Fits these air nipples
ARO 210 Series Industrial Series
AIR COUPLERS: COLORCONNEX
®
WURTH USA's Color Code System for
Standard Interchanges
This unique system allows for easy, color-to-color matching of couplers and plugs among the standard pneumatic interchanges. It also solves the problem of potential crossing and contaminating of different air lines.
Type and Series is easily identified by its color!
• Match coupler and plug types by color
• Dedicate hose applications to ensure a lubricated (wet) line is never used for a dry line application!
• 3/8” Series Couplers & Plugs for High CFM
Requirements
Type D
1/4” Series
Industrial
Type C
1/4” Series
Automotive
Type B
1/4” Series
ARO
Type J
3/8” Series
ARO
Type G
3/8” Series
Automotive
As air line interchanges become popular in the automotive industry, some of the different manufacturers developed their own styles in an attempt to capture the market. As a result, various incompatible, yet nearly identical-looking types emerged. To be able to recognize each type, one would have to memorize the brands on all the coupler sleeves and the shapes of all plugs.
Patent Pending ColorConnex
®
08.0140
AIR COUPLERS: COLORCONNEX
®
(CONTINUED)
3/8” COUPLERS & PLUGS - FOR HIGH CFM REQUIREMENTS
Black - Type G - Automotive
Description
Type G Automotive 3/8" body, 3/8" FNPT plug
Type G Automotive 3/8" body, 3/8" MNPT plug
Art #
Type G Automotive 3/8" body, 3/8" FNPT sleeve coupler
16992038
Type G Automotive 3/8" body, 3/8" MNPT sleeve coupler
16991938
169902038
169902138
Gold - Type J - ARO
Description
Type J ARO 3/8" body, 3/8" FNPT sleeve coupler
Type J ARO 3/8" body, 3/8" MNPT sleeve coupler
Type J ARO 3/8" body, 3/8" FNPT plug
Type J ARO 3/8" body, 3/8" MNPT plug
Art #
1699071438
1699171438
1699101438
1699111438
1/4” SERIES COUPLERS & PLUGS
Green - Type B - ARO
Description
Type B ARO 1/4" body, 1/4" FNPT sleeve coupler
Type B ARO 1/4" body, 1/4" MNPT sleeve coupler
Type B ARO 1/4" body, 1/4" FNPT plug
Type B ARO 1/4" body, 1/4" MNPT plug
Art #
1699267114
1699167014
1699093114
1699092114
08.0145
Dry Line
Wet Line
Dedicate Hose Applications
By using color to dedicate your different air lines, a lubricated line will never be used for a dry line application as long as our couplers and plugs match. As shown in the example image, the red and blue color types are used to distinguish the separate lines, preventing the paint gun from accidently being connected to the wet line, and therefore contaminating the paint with oil as it is being applied.
1/4” SERIES COUPLERS & PLUGS (CONTINUED)
Blue - Type C - Automotive
Description Art #
Type C Automotive 1/4" body, 1/4" FNPT sleeve coupler
1699261114
Type C Automotive 1/4" body, 1/4" MNPT sleeve coupler
1699261014
Type C Automotive 1/4" body, 1/4" FNPT plug
1699201340
Type C Automotive 1/4" body, 1/4" MNPT plug
1699201345
Red - Type D - Industrial
Description
Type D Industrial 1/4" body, 1/4" FNPT sleeve coupler
Type D Industrial 1/4" body, 1/4" MNPT sleeve coupler
Type D Industrial 1/4" body, 1/4" FNPT plug
Type D Industrial 1/4" body, 1/4" MNPT plug
Art #
1699264114
1699164014
169929314
169929214
08.0150
AIR COUPLERS: INDUSTRIAL (1/4”)
Industrial Series
• High Quality Fittings
• Plated Steel Couplers Have Hardened Balls
• Stainless Steel Springs
• Heat Treated To Reduce Wear
• Long Life Durability
• Rated At 300 psi
• Can Be Used With Popular Brands
• Other Sizes & Types Available
Industrial Series
Description
1/4" NPT Female
3/8" NPT Female
Type
C20
C20-23
Industrial Series
Description
1/4" Hose Barb
Type
C20-42
1/4" Series - Couplers
Description
1/4" NPT Male
Type
C21
1/4" Series - Couplers
Description
1/4" Hose Barb
Type
CP21-42
1/4" Series - Couplers
Description
1/4" NPT Female
Type
CP28
Art #
169964114
169964138
1/4” Series NPT Female Pipe Thread
Art #
169964214
Art #
169964014
1/4” Series NPT Male Pipe Thread
Art #
1699040014
Art #
1699092014
1/4” Series Standard Hose Barb
1/4” Series NPT Female Pipe Thread
08.0155
AIR COUPLERS: TRU-FLATE (1/4”)
Automotive Series Tru-Flate
• High Quality Fittings
• Plated Steel Couplers Have Hardened Balls
• Stainless Steel Springs
• Heat Treated To Reduce Wear
• Long Life Durability
• Rated At 300 psi
• Can Be Used With Popular Brands
• Other Sizes & Types Available
1/4" Series - Plugs
Description
3/8" NPT Male
Type
CP1-03
1/4" Series - Couplers
Description
1/4" NPT Male
Type
C1
1/4" Series - Couplers
Description
1/4" NPT Female
Type
C2
1/4" Series - Couplers
Description
1/4" NPT Male
Type
C27
Art #
1699013038
Art #
169961014
Art #
169961114
Art #
169960014
Tru-Flate 1/4” Series NPT Male Pipe
Thread
1/4” Series NPT Female Pipe Thread
1/4” Series NPT Male Pipe Thread
08.0160
AIR COUPLERS AND PLUGS: TRU-FLATE (3/8”)
3/8" Series - Plugs
Description
3/8" NPT Male
1/4" NPT Male
Type
CP5
CP7
Art #
1699023038
1699023014
3/8" Series - Plugs
Description
1/4" NPT Female
Type
CP8
Art #
1699022014
3/8" Series - Couplers
Description
3/8" NPT Female
1/4" NPT Female
Type
C6
C8
Art #
169962138
169962114
AIR COUPLERS AND PLUGS: INDUSTRIAL (3/8”)
3/8" Series - Plugs
Description
1/4" NPT Female
1/4" NPT Male
Type
CP26-22
CP25-02
Art #
1699053038
1699053014
3/8" Series - Couplers
Description
3/8" NPT Male
Type
C25
Art #
169965038
3/8” Series NPT Male Pipe Thread
3/8” Series NPT Female Pipe Thread
3/8” Series NPT Female Pipe Thread
1/4” Series NPT Female Pipe Thread
3/8” Series NPT Male Pipe Thread
08.0165
AIR COUPLERS: INDUSTRIAL (1/2”)
1/2" Series - Plugs
Description
1/2" NPT Male
Type
CP17
1/2" Series - Plugs
Description
1/2" NPT Female
Type
CP18
AIR COUPLERS: TRU FLATE (1/2”)
1/2" Series - Couplers
Description
1/2" NPT Male
Type
C9
1/2" Series - Couplers
Description
1/2" NPT Female
Type
C10
Art #
1699063012
Art #
1699062012
Art #
169963012
Art #
169963112
1/2” Series NPT Male Pipe Thread
1/2” Series NPT Female Pipe Thread
1/2” Series NPT Male Pipe Thread
1/2” Series NPT Female Pipe Thread
08.0170
AIR HOSE ACCESSORIES
Male Thread Fittings - BARBED (Solid Brass)
Thread Size Hose I.D.
Type
1/4" NPT 1/4" 401
1/4" NPT
3/8" NPT
1/2" NPT
3/8"
3/8"
3/8"
406
606
806
Art #
1699451414
1699453814
1699453838
1699453812
Male Swivel Fittings - BARBED (Solid Brass)
Thread Size Hose I.D.
Type
3/8" NPT 3/8" 606S
Art #
1699463838
Hi-Volume Male Fittings (Solid Brass)
Thread Size Hose I.D.
Type
1/4" NPT 3/8" 406S
Art #
1699473814
Female Thread Fittings - BARBED
Thread Size Hose I.D.
Type
1/4" NPT 3/8" 461
Art #
1699443814
Barbed Splicers
Hose I.D.
5/16"
3/8"
Type
502
602
Art #
1699450516
169945038
08.0175
AIR HOSE ACCESSORIES (CONTINUED)
Use these brass ferrules with standard hose barb fittings. To select correct ferrule, match ferrule I.D. and your hose O.D. as closely as possible.
Brass Ferrules
Ferrule I.D.
5/8"
23/32"
1/2"
11/16"
3/4"
Type
7327
7330
7323
7329
7331
Art #
169903141
169903381
169903122
1699031116
169903382
In-Line Accessories
Description
1/4" Inlet/Outlet
Art #
189116995
08.0180
BRASS PIPE FITTINGS
X124
Extruded 45˚ Street Elbow
Pipe Art #
1/8"
1/4"
3/8"
1/2"
1884057001
1884057002
1884057003
1884057004
X115
Extruded 90˚ Street Elbow
Pipe Art #
1/8"
1/4"
3/8"
1/2"
1884058001
1884058002
1884058003
1884058004
Extruded 90˚ Elbow
Pipe Art #
1/8"
1/4"
3/8"
1/2"
1884059001
1884059002
1884059003
1884059004
X100
Extruded Tee
Pipe
1/8"
Art #
1884060001
1/4"
3/8"
1/2"
1884060002
1884060003
1884060004
X101
08.0185
BRASS DRAIN COCKS
Back Seating Type
Pipe
1/8"
1/4"
Art #
1884096001
1884096002
240
BRASS PIPE FITTINGS
Ground Key Plug Type Lever
Handle
Pipe Art #
1/4"
1884074001
Plug Hex Countersunk
Pipe Art #
1/4"
3/8"
1/2"
1884089002
1884089003
1884089004
118
Reducing Coupling
Pipe Art #
1/4" to 1/8"
3/8" to 1/8"
3/8" to 1/4"
1884083001
1884083002
1884083003
119
Cap
Pipe
1/8"
1/4"
3/8"
1/2"
Art #
1884087001
1884087002
1884087003
1884087004
108
08.0190
BRASS PIPE FITTINGS (CONTINUED)
Plug Square Head
Pipe Art #
1/8"
1/4"
3/8"
1/2"
1884088001
1884088002
1884088003
1884088004
109
Plug Square Head
Pipe Art #
1/4"
3/8"
1884086002
1884086003
106
Plug Hex Head
Pipe Art #
cored 1/4" cored 3/8" cored 1/2"
1884090002
1884090003
1884090004
121
Close Nipple
Pipe Art #
1/8"
1/4"
3/8"
1/2"
1884091001
1884091002
1884091003
1884091004
112
Coupling
Pipe
1/8"
1/4"
3/8"
1/2"
3/4"
Art #
1884082001
1884082002
1884082003
1884082004
1884082005
103
Bushing
Pipe
1/4" to 1/8"
3/8" to 1/8"
3/8" to 1/4"
1/2" to 3/8"
1/2" to 1/4"
1/2" to 3/8"
3/4" to 3/8"
3/4" to 1/2"
Art #
1884084001
1884084002
1884084003
1884084004
1884084005
1884084006
1884084009
1884084010
110
08.0195
BRASS PIPE FITTINGS (CONTINUED)
Hex Nipple
Pipe
1/8"
1/4"
3/8"
1/2"
Reducing
1/4" to 1/8"
3/8" to 1/4"
Art #
1884092001
1884092002
1884092004
1884092007
1884092008
1884092009
122
Long Nipple
Length Pipe
1-1/2"
2
2-1/2"
3"
1-1/2"
2"
3"
1-1/2"
2"
3"
2"
2-1/2"
3"
1/8"
1/4"
3/8"
1/2"
Art #
1884093001
1884093002
1884093003
1884093004
1884093007
1884093008
1884093010
1884093013
1884093014
1884093016
1884093020
1884093021
1884093022
113
Adapter
Pipe
1/8" to 1/8"
1/4" to 1/4"
3/8" to 3/8"
Reducing
1/4" to 1/8"
3/8" to 1/4"
1/2" to 1/4"
1/2" to 3/8"
Art #
1884085001
1884085003
1884085006
1884085007
1884085008
1884085009
1884085010
120
08.0200
BRASS D.O.T. AIR BRAKE FITTINGS FOR S.A.E J844D NYLON TUBING
90˚ Elbow-Tube to Male
Pipe
Tube Pipe Art #
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/8"
1/4"
3/8"
1/8"
1/4"
3/8"
1/2"
1/4"
3/8"
1/2"
1884041001
1884041002
1884041003
1884041004
1884041005
1884041006
1884041007
1884041008
1884041009
1884041010
1469 1468
Connector-Tube to Male Pipe
Tube Pipe Art #
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/8"
1/4"
3/8"
1/8"
1/4"
3/8"
1/2"
1/4"
3/8"
1/2"
1884010001
1884010002
1884010003
1884010004
1884010005
1884010006
1884010007
1884010008
1884010009
1884010010
Connector-Tube to Female
Pipe
Tube Pipe Art #
1/4"
1/4"
3/8"
3/8"
3/8"
1/2"
1/8"
1/4"
1/8"
1/4"
3/8"
3/8"
1884081001
1884081002
1884081003
1884081004
1884081005
1884081006
1466
45˚ Elbow-Tube to Male
Pipe
Tube Pipe Art #
1/4" 1/8"
1/4"
3/8"
3/8"
1/2"
1/2"
1/4"
1/4"
3/8"
3/8"
1/2"
1884150001
1884150002
1884150003
1884150004
1884150005
1884150006
1474
Tee-Ends Tube & Male Pipe
Center Tube
Tube Pipe Art #
3/8"
1/2"
3/8"
3/8"
1884071001
1884071002
1471
Tee-Ends Tube Center Male
Pipe
Tube Pipe Art #
1/4" 1/8"
1/4"
3/8"
1/2"
1/4"
3/8"
1/2"
1884061001
1884061002
1884061004
1884061005
1464
08.0205
BRASS D.O.T. AIR BRAKE FITTINGS FOR S.A.E J844D NYLON TUBING
(CONTINUED)
Tee-Tube Three Ends
Tube
1/4"
Art #
1884321001
3/8"
1/2"
1884321002
1884321003
1464
Sleeve
Tube
1/4"
3/8"
1/2"
Art #
1884260001
1884260002
1884260003
1477
Nut
Tube
1/4"
3/8"
1/2"
Art #
1884362001
1884362002
1884362003
1461
1481
Brass Insert
Tube
1/4"
3/8"
1/2"
Art #
1884280001
1884280002
1884280003
BRASS PUSH-TO-CONNECT D.O.T. AIR BRAKE FITTINGS FOR S.A.E J844D
NYLON TUBING
PC1474
45˚ Elbow-Tube to Male Pipe
Tube
3/8"
3/8"
Pipe
1/4"
3/8"
Art #
188505001
188505002
Union Tee-Tube Each End
Tube
1/4"
3/8"
1/2"
Art #
188502001
188502002
188502003
PC1464
90˚ Elbow Tube to Female
Pipe
Tube
1/4"
Pipe
1/8"
Art #
188503001
PC1470
08.0210
BRASS PUSH-TO-CONNECT D.O.T. AIR BRAKE FITTINGS FOR S.A.E J844D
NYLON TUBING (CONTINUED)
PC1469
90˚ Elbow-Tube to Male Pipe
Tube
5/32"
Pipe
1/8"
Art #
1885030001
1/4" 1/8"
1/4"
3/8"
3/8"
1/2"
1/2"
1/4"
1/4"
3/8"
3/8"
1/2"
1885030002
1885030003
1885030006
1885030007
1885030008
1885030009
Union Coupling
Tube
5/32"
Art #
188501001
1/4"
3/8"
1/2"
188501002
188501003
188501004
PC1462
BRASS PUSH-TO-CONNECT D.O.T. AIR BRAKE FITTINGS FOR S.A.E J844D
NYLON TUBING (CONTINUED)
PC1468
Connector-Tube to Male Pipe
Tube Pipe Art #
5/32" 1/8"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/8"
1/4"
3/8"
1/8"
1/4"
3/8"
1/2"
3/8"
1/2"
188504001
188504002
188504003
188504004
188504005
188504006
188504007
188504008
188504010
188504011
S.A.E. - J844D Nylon Air Brake Tubing
Outside Dia.
I.D.
Wall
Thickness
Type 3B Reinforced
3/8"
1/2"
.062
.062
W.P. (PSI)
350
240
Reel Length
(ft.)
100
100
Art #
1884148538
1884148512
08.0215
BRASS D.O.T. AIR BRAKE FITTINGS FOR COPPER TUBING
Sleeve
Tube
3/8"
Art #
1884261004
1160
Nut
Tube
3/8"
Art #
1884363002
1161
Union Coupling
Tube Art #
1/4"
1/2"
1884031001
1884031003
1162
90˚ Elbow Tube to Male Pipe
Tube
3/8"
Pipe
3/8"
Art #
1884032001
BRASS D.O.T. AIR BRAKE COUPLINGS
Sleeve
Hose I.D.
3/8"
Art #
1884024001
1490
Coupler Assembly (Nut,
Sleeve, & Coupler)
Hose
I.D.
Pipe Art #
3/8"
1/2"
3/8"
3/8"
1884015002
1884015004
08.0220
1492
Coupler Assembly (Nut,
Sleeve, & Coupler)
Hose
I.D.
Pipe Art #
3/8" 3/8"
1884023002
1493
STEEL ONE PIECE CRIMP HOSE ENDS
• Use with medium to high pressure hydraulic hose
Male Pipe
Hose I.D.
Pipe Art #
1/2" 3/8"
1884094013
SCK 625
J.I.C. 37˚ Female Flare
(swivel)
Hose I.D.
Pipe Art #
1/2" 1/2"
1884095016
SCK 638
BRASS S.A.E. 45˚ FLARE
42
Union Coupling-Tube to Tube
Pipe Art #
1/8"
3/16"
1/4"
3/8"
1884043001
1884043002
1884043003
1884043004
48
Union Coupling-Tube to Tube
Tube Pipe Art #
1/4"
5/16"
5/16"
3/8"
3/8"
3/8"
1/2"
1/2"
1/4"
1/8"
1/4"
1/8"
1/4"
3/8"
3/8"
1/2"
1884044003
1884044006
1884044007
1884044008
1884044009
1884044010
1884044014
1884044015
49
90˚ Elbow Tube to Male Pipe
Tube
3/16"
Pipe
1/8"
Art #
1884045001
54
45˚ Elbow Tube to Male Pipe
Tube
1/4"
3/8"
Pipe
1/8"
3/8"
Art #
1884046001
1884046006
08.0225
BRASS S.A.E.45˚ INVERTED FLARE
90˚ Tube to Male Pipe
Tube Pipe Art #
1/4"
1/4"
5/16"
3/8"
3/8"
3/8"
1/8"
1/4"
1/8"
1/8"
1/4"
3/8"
1884019002
1884019003
1884019004
1884019006
1884019007
1884019008
149
Steel Nut
Tube
1/8"
3/16"
1/4"
5/16"
3/8"
Art #
1884072001
1884072002
1884072003
1884072004
1884072005
S141 148
Connector Tube to Male Pipe
Tube Pipe Art #
3/16"
1/4"
1/8"
1/8"
1884016001
1884016002
Brass Nut
Tube
3/16"
1/4"
5/16"
3/8"
Art #
1884018001
1884018002
1884018003
1884018004
141 142
Union Coupling-Tube to Tube
Tube
3/16"
1/4"
5/16"
3/8"
Art #
1884017002
1884017003
1884017004
1884017005
Steel Nut-Long Style
Tube Art #
3/16"
1/4"
1884073001
1884073002
SL141
BRASS J.I.C. 37˚ FLARE
3748
Connector Tube to Male Pipe
Tube
3/8"
Pipe
1/8"
Art #
1884048004
3/8" 3/8"
1884048006
08.0230
BRASS COMPRESSION FITTINGS
• No tube flaring necessary
• Manufactured for low and medium pressure work.
• Use Wurth Pipe Sealant Art. # 0893511050
Tee Tube Three Ends
Tube
1/4"
Art #
1884051001
3/8"
1/2"
1884051003
1884051004
64
In-Line Sleeve
Tube
1/8"
3/16"
1/4"
Art #
1884052001
1884052002
1884052003
260 68
Connector Tube to Male Pipe
Tube
3/16"
Pipe
1/8"
Art #
1884053001
1/4" 1/8"
1/4"
3/8"
3/8"
1/4"
1/4"
3/8"
1884053002
1884053003
1884053006
1884053007
69
90˚ Elbow Tube to Male Pipe
Tube
1/8"
5/16"
3/8"
3/8"
Pipe
1/8"
1/8"
1/8"
1/2"
Art #
1884054001
1884054002
1884054003
1884054004
Standard Sleeve
Tube
1/8"
3/16"
1/4"
5/16"
3/8"
1/2"
Art #
1884055001
1884055002
1884055003
1884055004
1884055005
1884055006
60
Union Coupling
Tube
1/8"
3/16"
1/4"
5/16"
3/8"
1/2"
Art #
1884056001
1884056002
1884056003
1884056004
1884056005
1884056006
62
08.0235
BRASS AIR BRAKE HOSE MENDERS
WURTH’s quick service DOT air brake hose repair kits allow you to repair and custom build a hose to almost any specification desired. DOT air brake hose (next page) is available in 3/8” and 1/2” 50 ft reels. Cut the hose to any length desired and easily attach the corresponding air hose menders to each end to create a custom DOT-approved hose in minutes.
Can be used on any vehicle that uses an air brake system, including the following:
• Box trucks
• Garbage trucks
• School buses
• Buses
• Etc.
Size
Air Brake Hose Mender Kit - 1/2” hose x 3/8” NPT - 2 pack
Air Brake Hose Mender Kit - 3/8” hose x 1/2” NPT - 2 pack
Air Brake Hose Mender Kit - 3/8” hose x 3/8” NPT - 2 pack
Art #
0885900000
0885900001
0885900002
Perform these steps for each side of the hose, and create a custom DOT-approved air brake hose in less time than it takes to read this page!
Step 1:
Remove air hose brake mender fittings kit from bag. Cut air brake hose to desired length.
Step 2:
Thread the shell onto the air brake hose (outside diameter) by hand until it reaches the inside lip.
Step 3:
Screw in the brass hose barb into the air brake hose (inside diameter) using the supplied allen hex wrench or using a drill with corresponding hex bit, until the fitting is flush with the shell.
08.0236
BRASS AIR BRAKE HOSE SPLICERS
Würth’s DOT Air Brake Hose Splicers come in two sizes to repair an existing hose if damaged between the two ends of the assembly. The kit comes with two barbs (one with a female end, the other with a male end) to allow for an air brake hose with damage in between the ends to be spliced together.
Very similar in concept to the Air Brake Hose Menders, just focusing more on repairing an existing hose assembly rather than creating a new one.
Each kit includes:
• 2 Brass Barbs (1 female, 1 male)
• 2 Steel Collars
• 1 Allen Wrench
Eliminates the need to stock thousands of pre-fabricated sizes!
Cut bulk length air brake hose to the size needed and use menders to make a
DOT-approved hose!
Size
Air Brake Hose Splicer Kit - 3/8” Hose
Air Brake Hose Splicer Kit - 1/2” Hose
Art #
0885900003
0885900004
DOT SAE J1402 AIR BRAKE HOSE ROLLS - 50 FT ROLLS
DOT air brake hose is available in 3/8” and 1/2” 50 ft reels. Cut the hose to any length desired and easily attach the corresponding air hose menders to each end to create a custom DOT-approved hose in minutes.
Size
3/8” hose
1/2” hose
Art #
1884710038
1884710012
08.0237
AIR HOSE & ACCESSORIES
• Metal bowl with sightglass
• Compact and modern styling gives outstanding filtration performance
• 50 micron element standard
• 1/3 pint reservoir
• Inlet pressure 150 PSI maximum.
Airline Filters - 1/4" Basic Metal Bowl
Part Size Type
Manual Drain - 3/8" 4021A
Art #
1699031438
• Designed for use where performance is required in a minimum space
• Transparent bowl, 5-micron element standard
• Bowl guard not available with this model
Miniature Filter - 1/4" Basic
Part Size
1/4"
Type
F07-200A
Art #
169903414
08.0240
AIRLINE FILTERS & REGULATORS
• Metal bowl with sightglass
• Compact and modern styling gives outstanding filtration performance
• 50 micron element standard
• 1/2 pint reservoir
• Inlet pressure 150 PSI maximum
Airline Filters - 1/3" Basic Metal Bowl
Part Size
Manual Drain - 1/2"
Type
F74G-4M-MB
Art #
1699031612
Filter Regulator and Gauge
Part Size
Automatic Drain - 1/2"
Type
B74G-4AG-MB
Art #
169903310
08.0245
AIR HOSE
• Lightweight, heavy duty hose with a 100% guarantee against defects in materials and workman- ship for a full 2 years
• Never leave any airhose on the floor - damage and outer jacket swelling can occur from certain fluids
• 300 PSI working pressure
• 1,200 PSI burst pressure
Size
1/4"
3/8"
3/8"
Length
50 ft. roll
25 ft. roll
50 ft. roll
Art #
18951615
18951415
18951413
BLUE POLYURETHANE COIL AIR HOSE
• Ideal for pneumatic hand tool whip
• Lightweight, economical, small envelope size
• Swivel and rigid NPT connections
• Outperforms nylon assemblies
• Rated to 145 PSI operating pressure
• Temperature Range: -22ºF to +140ºF
• Will not mar surfaces
No More Tangled Air Hose!
Length
19.5 ft.
26 ft.
Art #
16996395
169999515
ULTRAFLEX AIR HOSE
• Excellent low temp. flexibility
• Extremely easy to handle, even in cold
weather where other PVC hoses become stiff
• Excellent abrasion resistance
• Resilient material avoids permanent
deformation caused by stresses
• Medium Class B oil resistance
• Non-marking pin-pricked cover
• Lightweight
• Silicone-free materials
• RoHS compliant
• Individually shrink-wrapped assemblies
Description
1/4”x25FT (1/4” MPT)
1/4”x50FT (1/4” MPT)
3/8”x25FT (1/4” MPT)
3/8”x50FT (1/4” MPT)
1/2”x25FT (3/8” MPT)
1/2”x50FT (3/8” MPT)
Art #
0699991425
0699991450
0699993825
0699993850
0699991225
0699991250
08.0250
AIR HOSE WHIP
• Designed to reduce stress on fittings and kinking of the air hose
• The 360º male swivel fitting permits the tool to operate at maximum efficiency
• 300 PSI working pressure
• 1,200 PSI burst pressure
Length
2 ft.
Art #
189514151
REPAIR FITTINGS FOR AIR HOSE
Reusable Hose Ferrule
Size Art #
5/8" OD to 3/8" ID
1699020002
7/8" OD to 1/2" ID
1699020003
Reusable Male Hose Stem
Size Art #
3/8" ID to 1/4" MPT
1699021001
1/2" ID to 1/4" MPT
1699021002
Installation instructions
• Thread the hose ferrule over the end of the hose
• Thread the hose stem into the hose ferrule
• No hose clamps or band clamps are required
• Maximum working PSI: 250 PSI at ambient temperature 70°F (21°C)
90 PSI REGULATOR
• Attach directly to air tool
• Regulates a constant 90 psi
Description
90 PSI Regulator
• Recommended for Würth DBS 3600
Art.# 07033600 and Sprayable Seam Sealer
Gun Art. # 08916284
Art #
0891161
AIR REGULATOR
Designed to vent downstream air for easy adjustment and regulate air pressure output up to 150 PSI to prevent accidental pressure changes. Ideal for monitoring and maintaining air pressure. Works with any
1/4” air tool - great for use with DBS 3600 (Art.# 07033600), Seam Sealer Gun (Art.# 08916284), and Multi Sprayer (Art.# 0891110).
• 1-1/2” diameter dial (0-200 PSI)
• 150 PSI max./0 PSI min. air pressure
• 1/4” FPT inlet, 1/4” FPT outlet
• 120 CFM @90 PSI
Description
Air Regulator
Art #
0891160
08.0255
SUPER WURTH BLOW GUN
• Developed in cooperation with industrial designers to ensure optimum ergonomics and function
• Ideal for vertical installations
• Noise reduced, meets OSHA
• Maximum working pressure 175 psi
• 1/4” NPY inlet connection
Description
Super WURTH Blow Gun
Art #
07149234
IN-LINE BLOW GUN
• Instant air when sanding, grinding or drilling without having to change tools
• Fits permanently between air hose and coupler
• Small, compact and handy
• Natural angle for easy use
• Durable yet weighs only 2 ozs.
• Precision machinery
• OSHA approved
• Use with 3/8” nipple or male coupler
Description
In-Line Blow Gun
Art #
17149227
WURTH PISTOL VAC
Operates wet or dry
Includes:
• Crevice Tube
• Vacuum Bag
• Pistol
• Hose
• Brush
• 20” Extension Tube
Description
WURTH Pistol Vac
Art #
07149250
Coupler not included.
Close Nipple needed when connecting a female coupler.
Airliner not included.
08.0260
AIR COMBS
Filter and Radiator Cleaner - A new type of blow gun! Special multi-port nozzle maximizes air pressure and volume at a 90˚ angle. Thoroughly cleans air filters, condensers and radiators from the inside out.
• Focused high-pressure output
• 5x the air volume
• Long reach 90˚ airflow
• Access hard-to-reach areas
• Great for all air filters, radiators and condensors
• Extends filter life
• Available in two sizes
Industries and Applications
• Agriculture
• Construction
• Automotive
• Industrial
• Stationary Power
• and many more!
Description
24” Air Comb
36” Air Comb
Art #
17149024
17149036
Close up
24”
36”
08.0261
08.0262
AIR EVAC II
Description
Air Evac II
Set Includes:
Polyethylene storage case
Radiator neck adapter with vacuum gauge
Refill hose with filter
Sold Separately:
Air Evac II Fill Hose Assembly
Art #
07145518
Qty.
1
1
1
Art. #
07145520
Features:
• Checks for leaks
• Purges air
• Refills system
• GM recommended
Problem:
• Airlocks in the cooling system of today’s vehicles have become a prevalent problem
• The problem can be caused by the position- ing of the radiator at a level equal to or lower than the engine
• Upon refilling with liquid, air is trapped in the cooling system reducing circulation
• This results in overheating, added installation time and other problems
• While some OEM’s have attempted to address this by installing air-bleed devices on the cooling circuit, they are still plagued by airlocks
Solution:
• The Air Evac II system purges those prob- lematic airlocks, checks for leaks and then allows the technician to refill the system quickly and easily
• Simply connect your shop air to the Air Evac
II, pull vacuum, check for leaks and then refill in seconds
Description
Air Evac II Gauge
Art #
07145519
Description
Air Evac II Cone
Adapter
Art #
07145521
08.0265
08.0266
ANGLED GEAR
Description
Angled Gear
Fast, simple 360° adjustment of handle for high flexibility.
3
360°
4
t
1
2
Art #
06149000
Powerful angled screwing gear for screwing and drilling work. Suitable for use with electric drills and battery operated driver drills.
Specially hardened steel enable maximum torque of up to 57 Nm or maximum speed of
2,000 rpm.
• Handle with soft grip
Secure hold and 360° steplessly adjustable handle - optimum adjustment to the respective work application
• Compact design
Excellently suited for screwing in cramped and hard-to-reach places
• Magnetic 1/4” bit mount with quick-
change chuck
Screws held securely by magnetic effect - suitable for all standard bits and bit drills with
C6.3 and E6.3 mount
• Mount: 1/4" E 6.3, hexagon
•
Dimensions:
165 mm L x 32 mm W x 50 mm H
08.0269
SPLIT POINT DRILL
Drill Size
3/16"
13/64"
17/64"
9/32"
Dec. Equiv.
Inches
.1875
.2031
.2656
.2812
Flute Length
2-5/16"
2-7/16"
2-7/8"
2-15/16"
Overall Length Art #
3-1/2"
3-5/8"
4-1/8"
4-1/4"
16283316
162831364
162831764
16283932
SHEET METAL DRILLS HSS E
• CBN (cubical boron nitride) deep ground
• Universally suitable. Stepless drilling and widening of holes within the diameter range 3-61 mm
• Suitable for drilling of very thin sheet metal
• No countersinking or pre-drilling
• Speed table enclosed
• Burr-free drilling without deforming the sheet metal
• Excellent heat conductivity for improved tool life due to radial and axial relief grinding
• Shank 3 phase ground
• With laser scale, therefore easy indication of required drill hole diameter
National Aerospace Standard 907 Type
A, Jobbers Length Drills
• High speed steel, surface treated
• 118° split point
• For use in a wide range of operation condi-
tions
• Bright or Blue
Art. # 069402414 - Tapered: 4-14mm
Size
1
2
Drill Dia. (mm) Total Length
(mm)
3 - 14 58
5 - 20 71
Shank Dia.
(mm)
6
8
Art #
069402414
0694022420
Art. # 069402420 - Tapered: 4-20mm
Speed Table for Stepped Drills
Material
Size
1
2
Sheet Thickness
Diameter mm
3 - 14.0
4 - 20.0
Non-Ferrous Metals Stainless Steel
Sheets, Nirosta, A2
0.1 - 6mm n=rpm
2000 - 1500
1500 - 800
0.1 - 2mm n=rpm
600 - 400
400 - 200
Plastics,
Duroplastics,
Thermoplastics
up to 10mm n=rpm
3000 - 2000
2000 - 1500
Steel Sheets,
Soft, i.e. St14-St37
0.1 - 4mm n=rpm
800 - 500
600 - 300
08.0270
VARIABLE BIT
• Single cutting edge creates perfectly round holes in metal, wood,
plastic and other thin materials
• Constructed of industrial grade high speed molybdenum steel, heat
treated and tempered for long life
• 3-sided shank won’t slip in drill chuck
• Self-starting tip, no center punch required
• Art. # 0694 14138 cuts 10 different sizes
• Great for drilling car antenna holes
Size
1/8" - 1/2"
3/16" - 1/2"
3/16" - 7/8"
1/4" - 3/4"
1/4" - 1-3/8"
Art #
16941812
169431612
169431678
16941434
169414138
SPOT WELD DRILL BITS
• Special drill bit for the removal of spot welds
• Improved PLUS centering tip is also suitable for high-strength car body sheets
• Suitable for use in any standard drill
Tips to enhance the lifespan of the centering tip:
• Do not use in drills with an impact chuck or spindles
• Set the drill to a suitable speed; the speed of compressed air devices is generally set too high
Type Size
HSCO
HSCO
HSCO
HSCO w/
Step
HSS
HSS
HSS
M6
M8
M10
7.5 mm
M6
M8
M10
65
78
88
Total
Length
(mm)
65
78
88
88
28
38
44
Groove
Length
(mm)
28
38
44
Stop 10
Max.
Speed
1,100 rpm
850 rpm
-
670 rpm
920 rpm
700 rpm
-
Art #
0710006
0710008
1710010
07100010
07106
07108
071010
08.0275
WELD POINT CUTTER
METRIC HSS TWIST DRILL BITS
1
1.5
2
2.5
4
5
3
3.5
6
6.5
7
8
8.5
9.5
10
Size (mm) Length
61
70
75
86
(mm)
34
40
49
57
93
101
109
117
117
125
133
12
18
24
30
33
39
43
52
57
63
69
75
75
81
87
Flute (mm) Art #
062510
062515
602520
062525
062530
062535
062540
062550
062560
062565
062570
062580
062585
062595
0625100
• Adjustable by actuating adjustment screw
• Cutting crown usable on both sides
• Use in body shops, sheet metal shops, appa-
ratus construction
• No tearing of sheet metal
• No deformation
• Quick and economical
Description
Weld point cutter
Replacement cutter
Art #
06981
069801
• Type N with cylindrical shank, right hand cut
• For powerful, stable, standard drilling machines, suitable for normal work on conventional materials. For mild and cast steel (alloyed or non-alloyed) grey cast iron, tempered castings, sintered steels, graphite, argentan and nondular iron.
Description
19 Piece Drill Bit Set
Art #
06344
08.0280
COBALT DRILLS
Drill
Size
3/6"
3/8"
Dec.
Equiv.
Inches
.1875
.3750
Flute
Length
Overall
Length
2-5/16" 3-1/2"
3-5/8" 5"
Art #
16220316 (D176)
1622038
TWIST DRILLS
• Cobalt high speed steel and heat resistant
• Gold finish
• 135° type P3 split point
• For use on stainless steel, titanium high temperature and high strength alloys
Drill
Size
1/8"
7/64"
9/64"
5/32"
Dec.
Equiv.
Inches
.1250
.1094
.1406
.1562
11/64" .1719
3/16" .1875
7/32"
1/4"
.2188
.2500
17/64" .2656
9/32"
5/16"
3/8"
1/2"
.2812
.3125
.3750
.5000
17/32" .5312
9/16" .5625
11/16" .6875
Flute
Length
Overall
Length
1-5/8"
1-1/2"
1-3/4"
2"
2-3/4"
2-5/8"
2-7/8"
3-1/8"
2-1/8" 3-1/4"
2-5/16" 3-1/2"
2-1/2"
2-3/4"
2-7/8"
3-3/4"
4"
4-1/8"
2-15/16" 4-1/4"
3-3/16" 4-1/2"
3-5/8"
4-1/2"
5"
6"
4-13/16" 6-5/8"
4-13/16" 6-5/8"
5-5/8" 7-5/8"
Art #
1624018
16240764
16240964
16240532
162401164
16240316
16240732
1624014
162401764
16240932
16240516
1624038
1624012
162401732
16240916
162401116
Drill
Size
#7
#10
#30
• 118°
• High speed steel, blue
• For general purpose production drilling
• For use in a wide range of operation conditions
• Used in various materials such as cast iron, steel and steel
forgings
Dec.
Equiv.
Inches
.2010
.1935
.1285
Flute
Length
Overall
Length
2-7/16" 3-5/8"
2-7/16" 3-5/8"
1-5/8" 2-3/4"
Art #
1624007
16240010
16240030
08.0285
DRILL BITS
Ultra Bor Super Premium (3 Flats on Shank-3/16” & larger)
Performance Features:
• M7 Industrial Steel withstands high temperatures, maintains sharpness
• 135˚ Split Point for fast penetration and accurate starting without center punch
• Precision ground point flutes, body, clearance and drill diameter for the ultimate in accuracy and
performance
• Black and bronze oxide surface treatments reduce friction
• Especially designed for hand held drills
• 3-flat shank design eliminates slippage and provides a positive grip
• Ideal for drilling in high carbon steel, stainless steel and other hard metal drilling applications
Reduced 3 Flat Shank
Standard 3 Flat Shank
Description Art #
21 Piece Drill Bit Set
16271100
Description Art #
29 Piece Drill Bit Set
1627029
Reduced 3 Flat Shank
1627729
Description Art #
13 Piece Drill Bit Set
16270131
08.0290
DRILL BITS (CONTINUED)
3/16"
13/64"
7/32"
15/64"
1/4"
17/64"
9/32"
Diameter
Inches
1/16"
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
11/64"
19/64"
5/16"
21/64"
11/32"
23/64"
3/8"
25/64"
13/32"
27/64"
7/16"
29/64"
15/32"
31/64"
1/2"
3"
3-1/8"
3-1/4"
3-3/8"
3-1/2"
3-5/8"
3-3/4"
Overall
Length
1-7/8"
2"
2-1/4"
2-3/8"
2-1/2"
2-5/8"
2-3/4"
2-7/8"
3-7/8"
4"
4-1/16"
4-1/8"
4-3/16"
4-1/4"
4-5/16"
4-3/8"
4-7/16"
4-1/2"
4-5/8"
4-3/4"
4-7/8"
5"
Flute Length 3 Flats Bits Art. # 3/8" Reduced
Shank Art. #
7/8"
1"
1-1/4"
1-5/16"
1-7/16"
1-9/16"
1-11/16"
16270116
• • • •
16270564
• • • •
16270332
16270764
• • • •
1627018
•
•
•
•
•
•
•
•
16270964
• • • •
1-13/16"
1-1/2"
1-5/8"
1-3/4"
1-7/8"
2"
2-1/8"
1-1/4"
16270532
• • • •
162701164
• • • •
16270316
• • • •
162701364
• • •
16270732
• • • •
162701564
1627014
• • • •
162701764
•
•
•
•
16270932
• • •
•
•
•
•
1-3/8"
2-1/2"
2-9/16"
2-5/8"
162701964
• • •
16270516
• • •
162702164
• • •
2-11/16"
2-11/16"
162701132
• • •
162702364
• • •
1627038
• • •
162702564
• 2-3/4"
2-13/16"
2-7/8"
2-15/16"
3"
162701332
162702764
16270716
•
•
•
3-1/8"
3-1/4"
3-3/8"
162702964
•
162701532
•
162703164
•
1627012
•
162773164
1627712
•
•
•
•
•
Color
Code
•
Included in Drill
Bit Index
16271100
1627029
1627729
16270131
Pcs.
21
29
29
13
08.0295
HOLESAW ARBORS & PILOT DRILLS
A
1/4” Round Shank
For small holesaws in light weight material and wood.
B
1/4” Shank with 3 Flats
Available for use with 9/16” to 1-3/16” to 2” holesaws. Medium to heavyweight materials.
C
7/16” Hex Shanks
For small holesaws in medium to heavyweight materials.
D
Quick Change 7/16” Hex
Pin drive construction permits fast interchanging of holesaws.
A
B
C
D
Recommended for Holesaw Sizes
9/16" to 1-3/16"
9/16" to 1-3/16"
9/16" to 1-3/16"
1-1/4" and larger
Pilot Size
1/2" - 20
1/2" - 20
1/2" - 20
5/8" - 18
Drill Size
1/4"
1/4"
1/4"
1/4"
Art #
1632001
1632002
1632004
1632006
1/4” HIGH SPEED PILOT DRILLS
Use with Above
Arbor Size
A,C,D,E
Recommended for use on
1-1/4" and larger
Art #
16320102
Use with Above
Arbor Size
B
Recommended for use on
For general cutting of metal and wood
Art #
16320104
08.0300
HOLESAW ASSORTMENT
• Quick and clean cut thanks to the HSS bi-metal construction
• For use in all steel materials, including cast metal, copper, bronze, aluminum, plastics and wood
• Number of teeth: 6/inch
• Cutting depth: 32 mm
Description
Holesaw Package
16 Pc.s
Art #
0964632
Includes:
Description
Holder A2
Holder A4
Hexagon extension, 300 mm
Ejector spring
D19, D22, D25, D32, D35, D38,
D44, D51, D57, D64, D67, D76
1
1
1
1
Qty.
1
Special Order Only Art #
063202
063204
063205
063207
0632...
HOLESAW TYPES
These holesaws provide an economical means of extending the useful range of portable drills, drill presses and lathes. Made of high speed steel welded to an extremely tough alloy steel back, these holesaws can be used to cut mild steels, cast iron, aluminum, brass and bronze, plastics, iron or steel pipe and wood. Holesaws range is size from 9/16” all the way up to 6” and have a cutting depth of up to 1-1/4”. Six teeth per inch allows these holesaws to give you a clean, accurately cut hole.
Red
Used on metal high production tools. Designed for cutting machinable materials, steel, aluminum, copper, brass, sheet metal, stainless steel, wood or plastics.
White*
Used for general construction, plumbing, electrical, maintenance work.
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"
3"
4
Hole Size Hole Saw
Adapt. #
5/8" -
3/4"
7/8"
-
1632002
1"
1-1/8"
1-1/4"
1-3/8"
-
-
-
-
-
-
-
-
-
-
1632008 -
-
-
-
-
-
-
-
-
-
-
-
Pipe Tap
3/4"
2"
-
1-1/4"
-
1-1/2"
-
2"
2-1/2"
-
Pipe
Entrance
3/8"
1/2"
-
-
-
3/4"
1-1/4"
1-1/2"
-
2"
-
2"
2-1/2"
Copper Pipe
Size I.D.
1/4"
1/2"
5/8"
3/4"
3/4"
-
1"
Art #
08.0305
163258
163234
163278
16321
1632118
1632114
1632138
1632112
1632134
16322
1632214
1632212
16323
16324
STUB LENGTH DRILLS
A230
Drill
Size
1/8"
1/4"
Dec.
Equiv.
Inches
.1250
.2500
Flute
Length
7/8"
1-3/8"
Overall
Length
Art #
1-7/8"
2-1/2"
1635018
1635014
TWIST DRILLS - WIRE GAUGE SIZES
118˚ Above Gauge 42
Drill Size
#11
Dec. Equiv.
Inches
.1910
Flute Length
1-3/16"
135˚ Gauge 42 and Below
Drill Size Dec. Equiv.
Inches
Flute Length
#29
#30
.1360
.1285
15/16"
15/16"
Overall Length Art #
2-1/4"
1635111
Overall Length Art #
1-15/16"
1-15/16"
1635129
1635130
TWIST DRILLS - LEFT HANDED DRILL BITS
Size
1/8"
3/16"
1/4"
5/16"
3/8"
Length
2-3/4"
3-1/2"
4"
4-1/2"
5"
Art #
0625715
0625316
0625714
06255116
0625318
• 180° below 1/16” & above 1/2”
• 135° below 1/16” - 1/2”
• High speed steel, blue
• For general purpose production drilling
• For use in a wide range of operation conditions
• Used in various materials such as cast iron, steel and steel forgings
A120
Drill
Size
5/16"
3/8"
Dec.
Equiv.
Inches
.3125
.3750
Flute
Length
Overall
Length
Art #
1-5/8" 2-13/16"
16350516
1-13/16" 3-1/8"
1635038
08.0310
TWIST DRILLS - HIGH SPIRAL CAR STYLE REAMER
• 1/2” Diameter shanks
• Heavy duty steel
• Designed for truing, aligning and deburring holes in structural steel members, automotive mainte- nance and fabrication
• Useful in cramped quarters with any 1/2” 3 jaw power tool
• Used for various type of metals including mild and surface hardened steel, 4140 steel, cast iron and steel
• Built in collar prevents over penetration
• The left hand fast spiral right hand cut is developed for high speed
Package Art. # Drill
Size
1/2"
5/8"
3/4"
Dec.
Equiv.
Inches
.5000
.6250
.7500
Flute
Length
3-5/8"
4-1/4"
4-9/16"
Overall
Length
Recomm.
Pilot Hole
Qty.
5-15/16" 5/16"
6-9/16"
7"
5/16"
1/2"
1
1
1
1698012
1698058
1698034 mm
3.0
3.1
3.2
5.0
6.2
HSS DRILL BITS DOUBLE-ENDED
• WURTH HSS Double-Ended Drill Bits are a special purpose drill bit that facilitates penetration of
the drill into the material
• No center punching is required and the drill does not drift from the drilling location
• Ideal for machining of thin materials and for drilling rivet holes
Size inches
1/8"
13/64"
1/4"
Length
56 mm
60 mm
60 mm
79 mm
91 mm
Shank
10.6 mm
11.2 mm
11.2 mm
17.0 mm
21.2 mm
Art. #
063630
063631
063632
063650
063662
08.0315
BIT HOLDERS - HEX SHANK HOLDER
Magnetic
Description
1/4" Hex Shank Holder x 2-31/32" for
1/4" Bits
1/4" Hex Shank Holder x 2-31/32" for
5/16" Bits
Art #
1614324902
1614324981
BIT ADAPTERS - MALE
Non-Magnetic
Description
Adapter 1/4" Male Hex Drive to 3/8"
Male Square Drive 1-5/8" OAL
Art #
1614363008
BIT HOLDERS - NUTSETS
Magnetic
Description
Nutsets 1/4" Dia. Short
Nutsets 1/4" Dia. Long
Nutsets 5/16" Dia. Short
Nutsets 5/16" Dia. Long
Nutsets 3/8" Dia. Short
Length
1-3/4"
6"
1-3/4"
6"
1-3/4"
BIT ADAPTERS - FEMALE
Non-Magnetic
Description
Adapter 1/2" Female Square Drive for 1/4" Hex Inserts
1-3/4" OAL
Adapter 1/2" Female Square Drive for 5/16" Hex Inserts
1-3/4" OAL
Art #
1614328581
1614328551
Art #
06149175
06149176
1614359010
06149178
06149179
08.0320
BIT HOLDERS - QUICK CHANGE BIT HOLDER
Non-Magnetic
Description
1/4" Quick Change Bit Holder
Art #
0614176711
BIT ADAPTERS - 1/4” HEX SHANK BIT HOLDER FOR 5/16” INSERTS
Magnetic
Overall Length
3-1/16"
Ref. #
M498
Art #
1614324981
SCREW DRIVER BITS - PHILLIPS
Hex
1/4"
5/16"
#2
#3
#1
#2
Tip
#1
#2
#3
#3
#2
#2
#2
#3
Length
1"
1-5/16"
2"
2-3/4"
6"
1-1/4"
Hex
1/4"
SCREW DRIVER BITS - POZDRIV
Tip
#2
#3
Length
1"
Art #
0614176652
0614176653
Art #
0614176274
0614176461
0614176648
1614324922
1614334931
0614176735
0614176736
0614176737
1614334922
1614314921
1614214002
1614214003
08.0325
SCREW DRIVER BITS - POZDRIV
Hex
1/4"
Tip
1/32"x7/32"
Length
1"
Art #
0614175653
SCREW DRIVER BITS - TORX
Hex
1/4"
5/16"
Tip
T-10
T-15
T-20
T-25
T-27
T-30
T-40
T-30
T-40
T-45
T-55
Length
1"
1-1/4"
SCREW DRIVER BITS - SQUARE DRIVE RECESS
Hex
1/4"
Tip
#2
Length
1"
Art #
06143110
06143115
06143120
06143125
06143127
06143130
06143140
1614514030
1614514040
1614514045
1614514055
Art #
161420002
SCREW DRIVER BITS - HEX BIT
Shank
1/4"
5
6
Hex Size
3
4
Length
1"
Art #
061417693
061417694
061417695
061417696
08.0330
SCREW DRIVER BITS - 5/16” HEX SHANK INSERT TORX DRIVE
Overall Length Driver Size
T-30
T-40
T-45
T-50
T-55
1-1/4"
"A" Ref #
.216
.260
.107
.128
.151
Art #
1614514030
1614514040
1614514045
1614514050
1614514055
SCREW DRIVER BITS - 1/4” HEX SHANK “EXTRA LONG” PHILLIPS DRIVE
Point Size
2
Overall Length
2-3/4"
Art #
1614334922
SCREW DRIVER BITS - 1/4” HEX SHANK “JUMBO LENGTH” PHILLIPS
DRIVE
Point Size
2
Overall Length
6"
Art #
1614314921
SCREW DRIVER BITS - 5/16” HEX SHANK INSERT PHILLIPS DRIVE
Point Size
2
3
Overall Length
1-1/4"
Art #
1614214002
1614214003
SCREW DRIVER BITS - 1/4” HEX SHANK “LONG” PHILLIPS DRIVE
Point Size
2
3
Overall Length
1-5/16"
Art #
1614324922
1614334931
08.0335
ZEBRA SAW FRAME
• With two-component plastic handle. Secure grip, fatigue-free working
• Two saw blade positions. (45˚ and 90˚ ) One features flush cutting
• Tensioning crank. Integrated in handle
• Handle slopes toward the rear. Starting edge remains unrestricted
• Saw blade tensioning to 176 lb. with slack-adjustment system
• Length: 15-3/8”
• Complete with one HHS 24 teeth bi-metal saw blade
Description
Zebra Saw Frame
Length in mm
390
Art #
071464015
ZEBRA HSS HACKSAW BLADES
Material
Thickness in mm
Over 2
Up to 2
# of teeth on
1"
Length in mm
24
32
18-32
300
No saw blade offers higher cutting capacity and flexibility.
• Special steels; high alloy high speed steel at the toothed edge, tough tool steel for the back
• Most up-to-date manufacturing techniques guarantee unexcelled quality and precision. For exam-
ple, Electron beams are used to weld joints.
• The toothed edges are made of fully hardened steel so their cutting capacities and service lives
are unsurpassable
• You work with one saw blade more quickly, longer and thus more economically
Application
• Tool steel (high and low-alloyed)
• Structural steel (high and low-alloyed)
• High-speed steel
• Stainless steel
Normal toothing
• Very economical
• Increased safety
• High cutting performance
• Longer service life
*Progressive toothing
Clear advantages due to different tooth pitches.
• For universal use
• High tooth pitch in area of start of cut enables easy start of sawing. “Fluttering” of thin materials is considerably reduced.
• Low tooth pitch in remaining cutting area enables high cutting performance
Width in mm Thick. in mm Art #
12.5
13.0
0.63
0.65
060330013
0603300133
060330113*
08.0340
WURTH SAWZALL BLADES
• Reduces the risk of breakage and achieves 2-10 times the service life compared with plain HSS
blades
• High resistance to heat due to high speed steel containing 8% cobalt at the cutting edge
• Highly flexible, unbreakable combination of HSS and HCS metals
• Blade width is 3/4”
• Cooling improves saw life of blade - we recommend using Cutting Oil Art. # 089305004
Type
waved, milled teeth set, milled waved, milled teeth set, milled teeth set, milled teeth set, milled teeth set, milled teeth set, milled teeth set, milled teeth set, milled
Length Teeth/ inch
24
4"
18
Art #
0615910010
0615910014
0615915010
24
0615915014
18
6"
0615915018
14
0615915026
8-14
12"
0615930526
10-14
9"
0615722842
6
8"
0615920318
14
8"
0615920326
10-14
ULTRAFLEX - BLUE TIP
Standard Steel / Low Tungsten Alloy
Hand hacksawing is an efficient method of separating metal on small and medium jobs that cannot be cut on a machine. Be sure to select the proper blade that will give you the best results.
The finest quality “standard” steel blade available which will perform as well as many HSS blades because of the considerable tungsten content. Ideal for softer materials. Excellent for schools, etc. where cost efficiency is necessary.
Length
12"
Teeth per Inch
24
Art #
1603305224
08.0345
PNEUMATIC RECIPROCATING SAW BLADES
Description
Pneumatic Reciprocating Saw Blades - 5 pack
Pneumatic Reciprocating Saw Blades - 5 pack
# Teeth Art #
24
0615942275
32
0615942265
WURTH USA now offers a line of bi-metal unique
®
saw blades for the pneumatic reciprocating saws widely used in auto body shops, metal fabricating and other applications.
Only WURTH Pneumatic Saw Blades are manufactured with bi-metal unique
®
saw technology for faster cutting longer blade life.
Our line includes two blades for metal and steel sheets.
08.0.346
08.0347
SET OF WARDING FILES
• With wooden handles
• In plastic case
• 6 piece set, DIN 7283
Type
flat flat pointed half round round triangular square
Length in mm
Cut Qty. Art #
100 2 1
07146174
CALIPER FILE
Length mm
150
Total length mm
260
width x thickness mm
10 x 5
Qty. Art #
1
07146179
CHEESEGRATER ROUND FILE
• For removal of brake dust, rust and dirt from
the caliper housing
• Helical gear on one side
• Plastic handle
• 150mm blade length, 10mm wide, 5mm
thick & 260mm total length
• Shape plastic fillers, wood & metal, fast and
easy
• Smooth cutting
• Non-clogging
• Extra sharp
Description
Cheesegrater Round
File
Art #
158596
08.0350
FILE BOARD SANDER
BODY FILE HANDLE
• For dry abrasive paper
• For quicker flat sanding of polyester filler, flat
surfaces and joints
• Plastic handle
Description
File board sander
Art #
0586445
• Concave and convex adjustable
• Handle made of aluminum
For Blade
Width mm
35
Length L1 mm
350
Height H1 mm
110
Height H2 mm
60
Qty. Art #
1
07146173
BODY FILE BLADES
• Radially milled on both sides
• Suitable for Art. # 07146173
Type
Radial medium
Teeth per inch
Length L1 mm
Hole distance
L2 mm
12 350 325
Width B1 mm
35
Qty. Art #
1
07146172
08.0355
MICROBRUSH™
• Comprised of small non-linting, non-absorbent fibers
• Solutions applied are held in suspension between fibers creating a non-dripping sphere which contains the material until it is applied
• Exact placement of solutions as small as 1/8 of a drop can be accurately applied
• Bends easily into any angle for the placement of material in areas of limited access
• Disposable - savings up to 60% are possible by the reduction of
excess required by ordinary bristle brushes
Description
Microbrush™
Art #
1693300
BRAKE CALIPER BRUSH
• For easy removal of caked on brake dust
• Thin profile allows for easier cleaning in confined areas
• 1-1/2” wide, 8-3/4” long and 3/8” thick
Description
Brake Caliper Brush
Art #
07155526
SMALL WIRE BRUSHES
• Overall length is 7-1/4”
• Poly handle
• Multi purpose brush
Description
Stainless Steel
Brass
Art #
17146993
17146994
SPARK PLUG BRUSH
• With wooden handle and wavy brass wire bristles
• Use to clean electrodes and contacts of spark plugs
Description
Spark Plug Brush
Art #
07155158
08.0360
ACID BRUSHES
• Heavy duty stainless steel handle
• Excellent for spreading Seam Sealers
• Horse hair bristles
Description
3/8" wide x 6" long
1/2" wide x 6" long
Art #
06933020
06933021
SPOT SANDING PEN
Clean rust, wax or dirt from any tight corner, crevice or hard to reach spot. It’s like a pencil point sandblaster!
Features:
• Paint repairs are better looking and permanent
• Gets in where other tools can’t reach
• The glass fibers are finer than human hair yet stronger than steel when it comes to cleaning power
• The cartridge can be extended out (by turning) as needed, then easily retracted when not in use
• Amply sized body makes it easy to hold for a comfortable grip
• Comes with one refill in handle
Applications:
• Remove rust from dings
• De-rust chrome and precision tools
• Clean electrical contacts and cable ends
• Clean recessed patterns
• De-gloss parts before gluing
Description
Spot Sanding Pen
Art #
158501
1” DISPOSABLE BRUSH
• Perfect for applying Rust Guard and Bedliner & Industrial Coating, as well as many other uses
Description
1" Disposable Brush
Art #
189091804
08.0365
36 PIECE BORE BRUSH SET
Description
36 Piece Bore Brush Set
Art #
1715010
The 36 Piece Bore Brush Set has steel, brass, and nylon bristle brushes to clean a wide variety of surfaces and locations.
Features
• 36 Brushes: 12 Steel, 12 Brass, and
12 Nylon
• 8 MM - 19 MM Diameter with 1/4” Hex
Shank
• 1/4” Locking Bit Head Driver Included
• Twisted Wires for Increased Cleaning
Function
Uses
• Designed for the professional technician who needs the right tool for the job.
• For use in Automotive, AG/ Industrial and
MRO Industries
• Cleans Bushings, Ports, Tubes, Holes,
Channels, Sockets, Brake Guides, and many more
Material Composition
Stainless Steel Shaft/ Nylon, Brass, Stainless
Steel
1/4” DRIVER HANDLE
Description
1/4” Driver Handle
Art #
1715000
08.0366
Features a quick lock adapter to ensure brush stays secure with usage. Use with any of our bore brushes (Standard, XL, and 9”) and bore brush extensions!
REPLACEMENT 3” BORE BRUSHES
3” Stainless Steel Tube Brushes
Description Art. #
8 mm
9 mm
1715108
1715109
10 mm
11 mm
1715110
1715111
12 mm
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
1715112
1715113
1715114
1715115
1715116
1715117
1715118
1715119
9” BORE BRUSHES (3 PIECES)
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
3” Brass Tube Brushes
Description
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
Art. #
1715208
1715209
1715210
1715211
1715212
1715213
1715214
1715215
1715216
1715217
1715218
1715219
3” Nylon Tube Brushes
Description Art. #
8 mm
9 mm
1715308
1715309
10 mm
11 mm
1715310
1715311
12 mm
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
1715312
1715313
1715314
1715315
1715316
1715317
1715318
1715319
Durable, abrasive, 3-piece Bore Brushes set features 9” length for cleaning tubes, ports, bearings and other general wire brush applications. Stainless steel twisted wire gives it extra strength to increase cleaning action. Each brush is fitted with a 1/4” hex shaft for use with a standard 1/4” driver. Do not exceed 600 rpm.
These brushes are meant for push and pull use.
Features
• Durable abrasive bore brushes
• 3-pc set (10, 15, and 19 mm sizes)
• 1/4” hex shank
• Use on ports, tubes, bearings and other common wire brush applications
• Do not exceed 600 rpm
Brushes available only as 3-piece set, not sold individually.
Description
9” Brass Bore Brushes (3 pc)
9” Stainless Steel Bore Brushes (3 pc)
9” Nylon Bore Brushes (3 pc)
Art #
1715501
1715502
1715503
08.0367
Note: 1/4 Locking Bit Head Driver sold separately (see opposite page).
XL BORE BRUSHES (4 PIECES)
Clean brake calipers, throttle bodies, fittings, and more!
Features
• 4-piece set (25, 30, 35, and 40 mm sizes)
• 1/4” hex drive, 3-1/2” overall length
• Unique large sizes for use on cars, trucks, motorcycles, engines, transmissions, etc.
• Available in stainless steel or brass
Brushes available only as 4-piece set, not sold individually.
Brass Set
Description
XL Bore Brushes - Brass (4-pc)
XL Bore Brushes - Stainless Steel (4-pc)
LIGHT SOCKET BRUSH SET (2-PC)
Stainless
Steel Set
Ergonomic handle
Art #
1715602
1715601
Brass for copper connectors and moderate corrosion
Remove corrosion and restore connectivity!
Unlike traditional bore brushes, the 2-piece Light
Socket Brush Set is designed to clean the entire surface area with one pass. The brushes feature a special tufted end which scrapes both the side and bottom walls, removing corrosion and debris from all contact areas.
Features
• Brass and stainless steel
• Cleans side and bottom of socket with one
pass
• Ergonomic handle
• For use in 1157 bulb sockets
• 5/8”-3/4” bores
Stainless steel for severe corrosion
Description
Light Socket Brush Set (2 pc)
Special tufted end
Art #
1715301
08.0368
Cleans bottom and side contacts
BORE BRUSH FLEXIBLE EXTENSIONS
Flexible Extension Kit 6”, 12” and 18” with Locking Set Screw
• Flexible extensions make it easy to reach hard-to-get-to places
• 6”, 12” and 18” flexible extensions on
1/4” drive hex shank
• Hex key included
• 1/4” female coupler uses a set screw to prevent a brush or similar type tool from slipping
• Perfect for accessing hard to reach transmission valve bodies, oil galley and
EGR (Exhaust Gas Recirculation) Ports
Description
Bore Brush Flexible Extensions
Note: 1/4 Locking Bit Head Driver sold separately.
Art. #
1715001
08.0369
1
UNIVERSAL KNIVES WITH “BREAK-OFF” BLADE SYSTEM
2
3
• Metal rail and sliding safety lock
• Spring operated retractor
Blade Dimensions
1
85 x 9 mm
2
100 x 18 mm
3
-
Material
Alu/Rubber/ABS
Alu/Rubber/ABS
Stainless Steel
Length
165 mm
-
200 mm
Weight
55 g
-
160 g
Art #
071566061
071566211
171566061
UNIVERSAL KNIFE WITH AUTO-LOAD BLADE CHANGING SYSTEM
• Internal chamber for 10 spare blades
• 10 blades included inside internal chamber
• Change the blade by retracting the slider and moving it forward
Use Replacement Blade #071566021
Material Length
Alu/Rubber/ABS 176 mm
Weight
260 g
Art #
071566016
BREAK-OFF BLADES
• 10 piece Dispenser Box
• Material: SK2 Steel
• Easy Break-off function
Size
18 mm
9 mm
Length Art #
100 mm
071566057
85 mm
071566077
Knife compatibility
071566211
071566061
BI-METAL BLADE
• Extremely safe to use - unbreakable under normal working conditions
• Highly economical and efficient - triple the service life of standard blades
• Limber and flexible - if necessary, the blade can be bent and worked with accordingly
(special applications like this are made possible with this type of blade)
Use with knife #071566016, and with most retractable knives
Description
Cartridge Tip Cutter
Art #
071566021
08.0370
-
Replacement Blade
071566077
071566057
RAZOR BLADES
• Strong steel back, single edge
• Individually wrapped for rust and edge protection
• Both styles 100 per box
Description
Grade 9 Standard Duty .009"
Grade 12 Heavy Duty .012"
Art #
16033010
16033009
CARTRIDGE TIP CUTTER
• Cuts the perfect angle on all plastic cartridge tips
• Cuts straight edge on our threaded sprayable seam sealer cartridges
Description
Cartridge Tip Cutter
Art #
07156609
PLASTIC RAZOR BLADES
• Easy to remove stickers from windshield without risk of cutting or scratching windshield
• Made of polypropylene
• Ideal for scraping many surfaces in automotive, industrial or home applications
Description
Plastic Razor Blades
Art #
16033011
08.0375
SHEET METAL SHEARS
Extremely versatile, powerful and compact.
• Double lever transmission - lower application of force with simultaneously increased cutting
performance
• Ideal design - small and light, therefore enormously maneuverable and suitable for a broad range of uses
• Can be effortlessly stored in any pocket
• Extremely compact cutting head - outstandingly suited for cutting extremely tight radii and for hard-to-reach places
• Bar-and-stop combination - more safety thanks to locking device and stop in one
• Simple, fast closing and holding closed of the shears
• Ergonomically shaped handle - due to insert made of soft material in the upper handle shell, the handle lies extremely well in the hand and is especially easy to grip guaranteeing fatigue-free working
• Optimized cutting geometry - no slipping off even without toothing
For continuous, straight and figure cutting on right.
Description
Right-handed Cutting
Left-handed Cutting
Length
180 mm
180 mm
Size comparison with conventional Zebra
®
sheet metal shears.
Cutting capacity up to (mm)
Steel Sheet Stainless Steel
1.2 mm 0.8 mm
1.2 mm 0.8 mm
Art #
071303200
071303205
08.0380
WURTH COMBINATION SHEARS
• For right & left hand cutting
• Stainless steel blades
• Lightweight
Description
WURTH Combination Shears
Art #
07140314
HOG RING PLIERS
• Straight nose grip
• Holds rings in place for fast work
Description
Hog Ring Pliers
Art #
150150001
RAZOR SNIPS
• Replaceable razor sharp steel blade
• Large jaw opening
• Wide flat anvil provides solid cutting surface
• Includes inch & centimeter scale
• Non-marring surface protection
• Convenient handle storage includes 5 replacement blades
• Steel frame with rubber grips
Description
Razor Snips
Replacement blades (6 pcs.)
Art #
171431610
171431612
08.0385
INSULATED & NON-INSULATED CRIMPING PLIERS
INSULATED CRIMPING PLIERS
NON-INSULATED CRIMPING PLIERS
• Cutting of screws M2.6-M5 diameter.
• Cutting of wires and stripping of insulation
20-8 gauge
• Crimping of insulated and non-insulated
cable connectors
Description
Insulated & Non-Insulated
Crimping Pliers
Art #
055810
• Cutting of screws M2.6-M5 diameter
• Cutting of wires and stripping of insulation
20-8 gauge
• Crimping of insulated cable connectors
Description Art #
Insulated Crimping Pliers
055811
• Cutting of screws M2.6-M5 diameter
• Cutting of wires and stripping of insulation
20-8 gauge
• Crimping of non-insulated cable connectors
Description
Non- Insulated Crimping
Pliers
Art #
055813
08.0390
INSULATED & NON-INSULATED CRIMP TOOL
WIRE STRIPPER
COMPACT CRIMPING TOOL HAMMER TYPE
• Crimping tool driven by hammer impact with
locking lever for easy loading
• Crimps terminals 8 to 4/0 gauge
Description
Compact Crimping Tool
Hammer Type
Art #
171599840
• Crimping tool for crimping of insulated cable
connectors
• Positive locking action guarantees quality crimping result
• Prevents faulty crimping results
• Power boost owing to transmission lever
• Low force requirement,
comfortable handling
• Three crimping stations: 22-18, 16-14,
12-10
Description Art #
Non- Insulated Crimp Tool
05581109
• Easy one hand operation
• Ergonomically designed
• Hardened steel blade
• Strips and removes excess wire in one
squeeze
• Strips up to 10 gauge (6 mm) wire
• Ideal for working in confined areas
• Made in Germany
• Full WURTH one year warranty
Description
Wire Stripper
Art #
0691500
08.0395
2-IN-1 CUTTER STRIPPERS
Large 2=in-1 Cutter/Stripper
Self-adjusting strips 10 - 14 AWG! The Large 2-in-1 Cutter/Stripper allows you to do both functions with one tool.
Features
• Self-adjusts to 10, 12, and 14 AWG house and appliance wire
• Use on any copper and aluminum wire
• Catches, holds and strips wire in one quick
motion
• Head allows full-flush cutting and has a low profile
• Surgical Steel jaws
Description
Large 2-in-1 Cutter/Stripper
Art #
0691700
Small 2=in-1 Cutter/Stripper
Self-adjusting strips 14 - 26 AWG! The Small 2-in-1 Cutter/Stripper allows you to do both functions with one tool.
Features
• Self-adjusts to 14 - 26 AWG soft copper
(electronic) wire online
• Catches, holds and strips wire in one quick
motion
• Head allows full-flush cutting and has a low profile
• Surgical Steel jaws
Description
Small 2-in-1 Cutter/Stripper
Art #
0691600
08.0396
08.0397
VEHICLE TEST LAMP
7-WAY ROUND PIN TRACTOR TRAILER CIRCUIT TESTER
Quickly troubleshoot tractor trailer electrical circuits.
The 7-Way Round Pin Tractor Trailer Circuit Tester does ‘one man testing’ for male and female 7-way round pin tractor trailer plugs and much more.
• Troubleshoots tractor trailer circuits
• One person can now test all the lighting
• Allows bypassing of troubled circuitry while on the road
• Eliminates guesswork
• Packaged with an extra jumper connector
• Winged grip for easy removal from electrical connector
Description
7-Way Round Pin Tractor Trailer Circuit Tester
Art #
06950057
7-WAY FLAT/SPADE PIN TRAILER CIRCUIT TESTER
A tremendous time saver!
The 7-Way Flat/Spade Pin Trailer Circuit Tester quickly and easily tests trailer circuits on most light to medium duty trucks and campers.
• Just plug the plug tester into the trailer plug socket and activate the lights, brakes, turn signal, etc.
• Watch the LED light as it indicates that each circuit is complete and the current is getting to the
plug
• “Winged” grip for easy removal from electrical connector
08.0400
• Brass construction
• 6 to 24 volts
• Wire length 30”
• Chrome vanadium tip with protective screw-
on cap
Description
Vehicle Test Lamp
Art #
069500224
DIAMOND GRIP TERMINAL CLEANERS
The 3-piece Diamond Grip Terminal
Cleaners set features highly-durable and abrasive coatings for cleaning small spade pin electrical connectors.
They reduce diagnostic guesswork and increase overall harness life!
• For flat and spade style terminals
• Three piece set for most common automotive, commercial and AG connectors
• Works on both male and female connectors
• Highly-durable abrasive coating
• Precisely removes corrosion
• Extends harness life and eliminates guess
work
• Access hard-to-reach male and female
connectors
• For flat pin/spade style terminals
• Leather styled pouch with magnetic clasp, small, medium and large cleaners
Description
Diamond Grip Terminal Cleaners
TRAILER CONNECTOR CLEANER MASTER SET
Art #
06956000
Description
Trailer Connector Cleaner Master Set
Art #
06956002
08.0401
The unique design of the Trailer
Connector Cleaner Master Set allows for precise removal of corrosion from both male and female pins, while maintaining proper pin dimensions. It is also great for cleaning butt and bullet type connectors found on most tail and side marker assemblies.
• For use on 4, 5, 6, 7 (spade) and 7 (round) truck and trailer male and female terminals
• Includes: 4 & 5 round pin, 6 round pins (2),
7 round pin (2) and 7 flat (spade) pin (2);
8 mm swabs (6) and 5mm swabs (12)
• Packaged in leather-style holster with magnetic clasps
• Additional applications: bullet, butt and standard; AWG terminal connectors; automotive, marine and industrial uses
A professional solution for trailer maintenance!
FEMALE BULLET CONNECTOR CLEANER SET
Description
Female Bullet Connector Cleaner Set
Art #
06956001
WURTH introduces the first complete set of tools for cleaning round pin type electrical terminals commonly used in Cannon, Deutsch, bullet type and general electrical connections. Each tool features a diamond abrasive coating for precise cleaning, sizing and durability. Commonly used in automotive, truck, industrial and military applications, the Female Bullet
Connector Cleaner Set can also be used for general file type applications where small orifice cleaning is required.
This set includes 12 individual pieces ranging in sizes from .030” - .120”, with duplicate cleaners in the 0.030” and 0.040” range. Each file is marked or color coded for size.
• Cleans round pin type electrical connectors
• Remove corrosion and reduces diagnostic
guesswork
• Features durable diamond abrasive coating
• Common applications: automotive, military, plow and industrial connectors
• Set includes following sizes:
.030”0.040” (2), .040”-.050” (2),
.050”-.060”, .060”-.070”, .070”-.080”,
.080”-.090”, .090”-.100”, .100”-.110”,
.110”-.120” and .120”-.130”
• Specific applications include Cannon,
Deutsch, and Bullet connectors
• Includes leather-type holder with identifiers for replacements
08.0402
14” TIGHT ACCESS TWEEZERS
The 14” Tight Access Tweezers are the ultimate tool for accessing hard to reach areas. Surpassing the reach of the industry’s longest available needle nose pliers with greater precision and control, it provides a sure grip on a variety of surfaces including wires, hoses, gaskets, o-rings, fuses, hardware and more.
Features
• 14” length
• Precise interlocking jaws for a strong grip
• Durable surgical stainless steel construction
• Slim profile design for tight access areas
• Extended length for greater versatility
• Surgical grade stainless steel
Description
14” Tight Access Tweezers
Art #
1714600
08.0403
DIAMOND CONTACT CLEANING FILES - 3 PC.
This three piece kit features highly durable, super hard, and abrasive diamond coating for cleaning and enhancing electrical connections to reduce diagnostic guesswork and increase electrical contact life. The set includes ultra-thin, flexible cleaners with ergonomic, non-slip, highly visible handles.
Optimized for cleaning large spade terminals including relays and forklift contacts, these flexible, diamond flat files are also great for use in general filing applications.
Super abrasive, diamond coated, flexible flat cleaners for large spade electrical contacts as well as general filing applications.
0.59”
(15mm)
0.35”
(9mm)
Features
• Three piece kit covers a wide range of contact sizes
• Enhances connections and extends contact life
• Non-slip, highly visible, ergonomic handles for comfortable use
• Ultra-thin, flexible files for added functionality
3.25”
(82mm)
0.24”
(6mm)
Applications
• Large spade relays
• Forklift contacts
• Industrial electrical contacts
• General tight-access filing
Description
Diamond Contact Cleaning Files - 3 piece
6.50”
(165mm)
Art #
1715700
Files only sold as set. Not sold separately.
08.0404
SHARP SHOOTER
Sharp Shooter sprayers are an inexpensive way to apply bulk chemicals like cleaners, degreasers, penetrating oils, solvents and lubricants. They use readily available compressed air, instead of flammable or dangerous propellants, and because they are reusable you don’t have to worry about disposal of empty cans.
• 32 oz. capacity
• Adjustable nozzle
•
Ideal for use with Wurth Brake Cleaner, Low VOC and Zero VOC Brake Cleaner,
Rost Off & more
• Fully automatic
• Rugged all metal welded construction
• Air pressurized, uses a standard air chuck
• Refillable & reusable
• Adjustable nozzle allows adjustment from pin stream to an extra fine mist
• Do not use water or water-based materials in steel sprayers
• Not recommended for paint
# Description
1
Sharp Shooter
2
Rebuild Kit
3
Adjustable Nozzle Assembly
4
Air Filler Assembly with Cap
5
Flexible 12" Wand
6
Refill Pot, 1 quart
Art #
08911102
089111021
089111023
089111024
089111025
089111022
1
5
Contents of Rebuild Kit (Art. #089111021)
Item
Perfluroelastomer Air Valve Core
Valve Spring
Cotter Pin
Valve
Gasket
O-Ring
Instructions
1
1
1
1
1
Qty
1
1
3
2
4
6
08.0405
QUICK SHOOTER
• 16 oz. capacity
• Hand held, no trailing hose or cord
• Works from 80 PSI to 150 PSI, maximum pressure 200 PSI
• NOT recommended for Throttle Body Cleaner
# Description
1
Quick Shooter
2
Rebuild Kit
3
Valve Nozzle Kit
4
6 Nozzles w/ Straws
Art #
08911200
08911202
08911201
08911204
2
Contents of Rebuild Kit (Art. #08911202)
Item
Valves
O-Rings
Nozzles
Nozzle Straws
Air Filler Assembly with Cap
Aluminum Valve Head
Instructions
3
1
1
1
6
6
3
Qty
6
1
4
08.0406
08.0407
ROST OFF PUMP BOTTLE
• 1 liter
Description
1
Rost Off Twp for 5 gal. Container
2
Pump Nozzle
3
Replacement Nozzle
4
Replacement O-Rings
3 4
Art #
089130201
0891503
08915990
0891599
ALL PURPOSE GERMAN SPRAY PUMP
• Ideal for most chemicals
• 1 Liter capacity
• Area for labeling your product
• Unique pump design
• Not intended for Low VOC Brake Cleaner
Description
All Purpose German Spray Pump
Art #
0891501
1
2
BRAKE CLEANER PUMP BOTTLE
• 1 liter
• Not intended for Low VOC Brake Cleaner
Description
1
Pump Bottle
2
Replacement Nozzle
3
Replacement O-Rings
2 3
Art #
089150108
08915990
0891599
08.0410
1
CHEMICAL RESISTANT SPRAY BOTTLE
The bottle is made of a thicker resin which offers greater durability and longevity. This sprayer now offers compatibility with an even wider range of chemicals. The bottle graphics include a check off grid for identifying contents and a handy graduation scale for diluting liquids.
• Output: 3.0 cc per stroke
• Constructed with chemically resistant materials
• Fully adjustable spray pattern
• 32 oz. capacity
• 3 imprinted measuring scales (oz. c.c., dilution)
• Built-in strainer to prevent particle clogging
Note: No sprayer is compatible with all chemicals, and no sprayer should be used with chlorinated solvents (including bleach) or chemicals that harden and congeal.
Description
Chemical Resistant Spray Bottle
Art #
0891504
GENERAL PURPOSE SPRAY BOTTLE
• 24 oz. capacity
• A longer trigger gives more comfortable balanced grip, providing a longer, steadier use duration
• Each stroke produces over 40% more output than standard spray heads
Description
General Purpose Spray Bottle
Art #
08915010
PUMP DISPENSER
• Fits 5 gallon containers
Description
Pump Dispenser
Art #
089100103
08.0415
UNIVERSAL POUR SPOUT
• Fits 1 quart & 1 gallon containers
Description
Universal Pour Spout
Art #
089191071
WURTH OIL EXTRACTOR KIT
• Ideal for changing oil on tractors, cars, motorcycles, boats and many other types of engines
• Suitable for removing various types of fluids, such as hydraulic oil, cutting oil and engine oil
• Made of impact-resistant materials and extremely corrosion resistant
• Ideal for degreasing and cleaning even where aggressive chemicals are used
• Shipped with 2 liter container
• Maximum working pressure 87 to 174 psi
• 1/4” inlet connection
Description
WURTH Oil Extractor Kit
Art #
07145525
SPRAY MASTER
• Fits European aerosol cans
Description
Spray Master
Art #
0891090
08.0420
GENERAL PURPOSE LEVER BARREL PUMP
Ideal for:
• Water, Alcohol, Gas, Diesel, Kerosene & Petroleum Based Products
Fits:
• 35 to 53 Gallons Drums
Construction:
• Polypropylene Housing, Steel Rod, Viton ® Seals
Delivers:
• 9 oz. / Stroke
Description
General Purpose Lever Barrel Pump
Art #
189100105
OILER
• Constructed from transparent plastic
• Retractable shaft
• Adjustable nozzle to regulate flow
• 8 oz. capacity
Description
Oiler
Art #
0695555323
FAUCET FOR 35 GALLON BRAKE CLEANER
• Self closing faucet fits all drums and barrels with a 3/4” bunghole
• Ideal for lacquer
Description
Faucet for 35 gal. Brake Cleaner
Art #
189100104
08.0425
BLEND CENTER KIT
Versatile single station modular dispensing kit that allows user to build the system they require or mount units individually. Mixes/blends concentrated chemical product with water to the desired dilution ratio.
Functions at 1 or 4 gallons per minute using included metering tip kit and Offset Metal Washer.
Features
• Can be used with most concentrated chemicals (Perfect for concentrated Bulk Eco Products)
• Easy to install and mount (can be gang mounted/assembled)
• Push button activator
Kit includes
• Blend Center Assembly
• 8 ft. Vinyl Supply Hose with Foot Valve Assembly
• 6 in Vinyl Outlet Hose
• Metering Tip Kit (15 Metering Tips to fine tune mixture ratios)
• Ceramic Weight for Vinyl Supply Hose
• Screw/Anchor Set for wall mounting
• Chemical Labels
• Mounting Guide
• Installation Instructions
Removal of the Offset
Metal Washer in the Green
Proportioner allows for switching from 1 GPM to
4 GPM.
Description
Blend Center Kit
Art #
1895633427
08.0430
CARTRIDGE GREASE GUN
• Twin-lock system prevents dummy lubrication and grease leakage at piston
• Includes metal pipe and rubber hose
• Use only in accordance with instructions
• Suitable for Art. # 0890 402
Instructions:
1. Unscrew gun head
2. Draw back handle
3. Remove both grease cartridge (max. 400g/14 oz.) covers and insert in gun
4. For bulk grease (max. 500g/16 oz.) draw back handle 5cm/2”, fill and repeat
5. Screw on gun head
6. Press clamping lever
7. Push plunger rod into gun
8. Open valve
Description
Grease Gun
Hose
End Piece
Art #
098600
0986002
0986003
1. Precision steel pump mechanism, no false
lubrication, no wearing seals.
2. Short-stroke feed system, grease feed possible
at any opening angle, two inlet openings,
good grease flow even at low temperatures.
3. Filling and bleeding valve. Filling possible
with cartridges, loose grease and with filling
unit.
4. Dosing scale for controlled grease outflow.
5. Grease and oil-resistant special sealing piston.
6. Rugged precision pipe.
7. Ergonomically shaped safety handle.
8. Anti-slip knurled marking in handle area.
9. Closed piston-rod handle.
10.Locking system - stepless, anti-slip piston rod
locking - no accidental triggering!
Design complies with German standard
DIN 1283 (M10x1) and is Tüv/GS, BLT and DLG-tested.
08.0435
PISTOL TYPE GREASE GUN
• Heavy duty grease gun for one hand operation
• 2-way loading, cartridge or bulk load
• Equiped with 3-1/2” grease pipe and coupler
• Zinc die cast head assembly, heavy gauge barrel with slip resistant painted cover
• Pistol grip parts are zinc plated
• Plunger shaped for three way loading
• Plunger rod with Posi-Lok feature
• 4 jaw hydraulic coupler
• Develops up to 5,000 PSI
• Maximum 400g/14 oz
Description
1
Grease Gun
2
Hose (sold separately)
3
Coupler (replacement)
Art #
19869010
0986002
19869003
1
2
3
08.0440
MANUAL CARTRIDGE GUN
• For dispensing 150, 225 & 300 ml. cartridges
Description
Manual Dual Cartridge Gun
Art #
08910091
MANUAL 200 ML. CAULK GUN, 2:1 RATIO
• 200 ml.
• Mechanical Advantage 26:1
• Side Loading Frame - Accurate Cartridge Placement
• For use with 2:1
Description
Manual 200 ml. Caulk Gun
Art #
08910200
MANUAL DUAL 50 ML. CARTRIDGE GUN
• For dispensing our Wurthfix All Art. # 0893 301900 and any 50 ml. cartridges
• Heavy duty construction
Description
Manual 50 ml. Cartridge Gun
Art #
1891989348
08.0445
PNEUMATIC DUAL CARTRIDGE GUN
ADAPTER FOR WURTH FIXALL
• Use with single cartridge style guns
Description
Adapter for WURTH FixAll
Art #
08910004
• True air regulator, 100 PSI maximum
• Dump valve stops material flow
• Adjustment knob controls flow
• Nominal thrust 484 lbs.
• For dispensing 150, 225 & 300 ml. cartridges
• Adjustable plungers to dispense 2:1 ratio cartridges
Description
Pneumatic Dial Cartridge Gun
Art #
08910092
MIXER TIPS
Type Description
Mixer Tip for Powerbond
Large Mixer Tip 10 oz. Cartridge for 7 & 10 oz.
Small Mixer Tip Cartridge for 7 & 10 oz.
Large Mixer Tip for 50 ml.
Small Mixer Tip for 50 ml.
Art #
08919609
08910014
08910013
089191060
08910005
08.0450
CAULKING TIPS
Type Description
Round Bead Tip
Art #
0890100099
Wide Flat Bead Tip
0891660
Standard Round Tip
(Will not fit AdhesivFlex)
0891653
Nozzle for Bond Seal
Pouch
0891601001
• Screws onto Wurth 310 ml. cartridges
• Wide tip produces a “flat” bead of Seam
Sealer to any width desired
• Markings on wide flat bead tip are easy to
read so tech can cut to desired width
• Wide tip is ideal for P/U beads & door skins
SINGLE CARTRIDGE AIR CAULKING GUN
• Permits smooth flow caulking
• Works with all single cartridge Seam Sealers including AdhesivFlex
Description
Single Cartridge Air
Caulking Gun
Art #
1891010
DELUXE CAULKING GUN
• Heavy duty
• One touch shut-off eliminates
product dripping
• The finest hand operated Caulking Gun in
the world
• Center balanced
• Cartridge holder removable for
easy cleaning
• For use with 310 ml. cartridges
Description
Deluxe Caulking Gun
Art #
089100
08.0455
NO DRIP CAULKING GUN
SAUSAGE PACK GUNS
08.0460
• For use with 310 ml. cartridges
• Automatic vacuum action prevents dripping
• Heavy gauge metal
• Variable power settings
• Reduces clean up time
• Built in spout cutter
• Built in ladder hook
• Built in top piercer
Description
No Drip Caulking Gun
Art #
0891000
Description
300 ml./13.53 oz.
Art #
0891300300
Description
600 ml./20.29 oz.
Art #
0891400600
Description
Nozzle for Bond Seal
Pouch
Art #
0891601001
UBS SPRAY GUN
• For fast application of stone-chip and underbody protection products on a plastic, bitumen and wax basis
• With variable spray nozzle for restoring original structure on sill panels, wheel wells, floor groups, etc.
• R 1/4” connection
• Only gun needed for both water and oil-based SKS , underbody seal and body wax
Description
UBS Spray Gun
SCHUTZ GUN (USA THREAD)
• For Bedliner Kit Only
Art #
08911063
Description
Schutz Gun
Art #
0891106233
SPRAY GUN (WITH 1 QT. ALUMINUM CUP - 1.7MM NOZZLE)
• All-purpose easy-to-clean paint spray gun
• Two-piece construction with gun featuring exclusive air valve design
• Fully adjustable wide fan pattern control
• 1 quart (946cc) capacity dripless cup
• Perfect for use with WURTH Shield
Specifications:
Nozzle Size:
Operation Pressure:
Net Weight: 2.31lbs. (1.05kg)
Dimensions W x H:
Avg. Air Consumpt.:
Air Inlet Thread NPT:
Required Compressor:
Max. Pattern at 8” Distance:
(280mm)
Fluid Inlet Thread NPT:
Air Hose I.D. Size:
1.8mm
50-65psi
7”x12”
7-12cfm
1/4”
3hp
11”
3/8”
6-8mm
Description
Spray Gun
Art #
189170010
08.0465
MULTI SPRAYER
The WURTH Multi Sprayer can spray SKS, Body Wax/Rust proofing, Underbody
Seal or any petroleum or water based products.
• WURTH Multi Sprayer can duplicate any OEM texture of chip guard or undercoat.
• Three adjustment knobs allow infinite spray patterns
• The WURTH Multi Sprayer is classified as an H.V.L.P. (High Viscous Low Pressure).
This allows thicker than normal products to be sprayed at low pressures with the
advantage of very little over spray.
Left to Right: Spray Mist Wand and 90˚ Wand
Description
Multi Sprayer Set with 2 Wands
Multi Sprayer Set ONLY - NO WANDS
Spray Mist Wand (not shown)
90˚ Wand (not shown)
Art #
0891111
0891110
08911511
08911510
PNEUMATIC SEAM SEALER GUN
• Very little maintenance
• Duplicates original OEM sprayed textures
• Use care when screwing cartridge into gun
• Always leave a cartridge in the gun
• A great time saver when repairing large areas such as in or around the trunk or fender wells
• Special bead nozzles included
4
5
10
1
7
2
2
3
No.
Description
1 Seam Sealer Gun
Round Bead Tip
Flat Bead Tip
3
8
Art #
08916284
0890100099
0891660
9
08.0470
8
9
6
7
No.
Description
4 Spray Cap
5 Nozzle
10
11
Canister O-Ring
Extrusion Cap
Round Bead Tip
Wide Flat Bead Tip
Air Regulator O-Ring
Cartridge O-Ring
11
6
Art #
18916289
18916290
18916291
18916292
0890100099
0891660
18916293
18916294
INDUSTRIAL STRENGTH SWABS
Low-lint, medical-grade, high-absorption swabs for the precise application and removal of chemicals.
Remove or apply most shop type chemicals, lubricants or paints on:
• Bores • Pipes
• Fittings
• Head Bolt Holes
• Grease guns
• Gaskets
• Tubing
• Threads
• Dirt & debris
• And much more!
325 piece kit includes:
3” (5mm)
6” (5mm)
6” (8.5mm)
100 swabs
100 swabs
50 swabs
6” (12mm)
9” (16mm)
9” (20mm)
25 swabs
25 swabs
25 swabs
Description
Industrial Strength Swabs - 325 pc Kit
Art #
0899574
08.0471
08.0472
JUMBO MARKERS WATER BASED REMOVABLE
Wide nib, allows marks from 0.1” to 0.576” wide, for thin to bold lines. Special acrylic paint formulation withstands rain, wind and direct sunlight for weeks without flaking or fading, yet wipes off with a damp cloth! Will not ghost metals!
Features
• General purpose marker
• Writes on most surfaces
• Water-based - no VOC’s
• Marks are bright, durable, and removable
• Quick drying, withstands indoor and outdoor conditions
• Ideal for all surfaces including metal, glass, wood, rubber, plastic, and more
• Valve controlled assembly is used to disperse paint as needed to the nib
• Marker barrels are made using plastic body filled with large paint quantity 22 ml
Suitable for
• Auto workshops
• Auto repair facilities
• Body shops
• New car dealerships
• Auto & Cargo manufacturing facilities
• Mark on windows, tires, and body panels
• Marking automobile & truck areas needed for repair
• Mark Cargo and metal for sizing and
distribution
Five different colors to choose from!
Description
Jumbo Marker Water Based Removable - Blue
Jumbo Marker Water Based Removable - White
Jumbo Marker Water Based Removable - Green
Jumbo Marker Water Based Removable - Yellow
Jumbo Marker Water Based Removable - Hot Pink
Art #
0967910951
0967910953
0967910950
0967910952
0967910956
08.0473
PAINT MARKING PENS
Four different types to choose from!
Description
Water Based Permanent Marker (BLUE)
Metal Pro Fiber Tip Marker for Galvanizing Steel (GREEN)
Pump Action Fiber Tip Marker (WHITE)
Super Metal Tip Marker (YELLOW)
Art #
0967910901
0967910902
0967910903
0967910904
Features
• Non-slip rubber pro grip
• Durable clip cap
• Medium point reversible tip extends life of marker
• Fast-drying
Suitable for
• Auto Body
• Auto & Cargo repair facilities
• Machine shops
• Tool shops
• Professional
welders
• Plumbers
• Fabricators
• Marble / Stone
Fabricators
Water Based Permanent Marker - BLUE
• 100% water based, permanent,
VOC-free, non toxic
• Weather and water resistant
• Ideal for autos - writes on metal, paint and glass
Metal Pro Fiber Tip Marker for
Galvanized Steel - GREEN
• Marks stay on during fabrication and come off completely in galvanizing tank
• No bleed through
Pump Action Fiber Tip Marker - WHITE
• Oil based permanent writes on rubber
• Ideal for all surfaces - metal, glass, wood, rubber, plastic and more
Super Metal Tip Marker - YELLOW
• Metal tip fine point
• Yellow oil based marker
08.0474
MICRO GRIP
Easy to use...
Adjust Clamp
08.0475
Release
Small grip pliers with toggle point joint clamping system.
Features
• Adjustable toggle joint clamp, jaw width
0-12mm, always guarantees the highest clamping force in extremely small space.
• Compact design (overall length 92mm) and low weight of 120g is handy, practical and universally useable.
• Advantage through use of high strength aluminum for easy handling, resistant against welding splashes, suitable for aluminum
repairs.
Description
Micro Grip
Art #
07140932
BUTT WELDING CLAMP
Features
• Holds panels of two different thickness
• Anchor panels nearly edge-to edge for MIG brazing an open butt joint
• Steel, Aluminum construction
• Dimensions: 1.25” x 1.5” x 2.75”
The Butt Welding Clamps are a fast and effective method of fastening materials for wire feed welders. Especially effective for positioning structural members, these clamps are useful with today’s higher strength steels that require lower welding temperatures.
Description
Butt Welding Clamp
MICRO WELDING CLAMP
Features
• Fast & effective method of fastening for pinch/spot weld
• Huge clamping force for its size due to the wedge style clamping
• Low profile
• Flexible gripping surface
• No need to bear down on wing nut due to amplified force of the wedge
• Dimensions: 0.625” x 1.25” x 2.375”
The Micro Welding Clamp provides a fast and effective method of fastening materials for pinch/ spot welds.
Description
Micro Welding Clamp
Art #
07140200
Art #
07140201
08.0476
WHEEL ARTCH CLAMP
Features
• Used to clamp hard to reach access points like a wheel arch
• Wedge method applies strong clamping force
• Ergonomic tightening
• No need to bear down on wing nut due to amplified force of the wedge
• Flexible gripping surface
• Low profile
The wheel arch clamp can be set up in seconds. The unique design of the clamp allows the clamping end to fit into tight spaces and moves the wing nut adjustment to an easyto-reach location.
Description
Wheel Arch Clamp
Art #
07140202
08.0477
WELDING CLAMPS
Description
Welding Clamp Set
Includes
Description
8 Welding Clamps - Zinc
8 Welding Clamps - Yellow
Welding Pliers
Art #
096574417
Sheet Metal
Thickness
0 - 2.5 mm
2.5 mm - 5 mm
0 - 2.5 mm
Pack
Qty
5 pcs
5 pcs
Art #
0713744025
0713744050
071374401
For quick and easy fixing of sheet metal for welding or bonding.
WURTH Patented Product
Features
• Quick fastening and loosening clamps for enormous time savings in comparison to impact or screw clamps.
• Most economical alternative to conventional vise grip pliers.
• Large clamping range in comparison to clamp size, owing to their small size (cor responding to a door seal); gap dimensions can be set without effort.
• No cumbersome loosening or opening of
clamps.
• Readjustment of sheet metal possible at any time without problem.
• The special angled shape of the pliers allow universal use of the clamps.
• Use clamps in tight spaces, such as: Trunk edges, hatchback, door columns, triangular windows, etc.
3 Easy Steps
1. Insert the welding clamp into the welding pliers and open the clamp.
2. Slide the clamp over the sheet metal edges to be joined and release the pliers.
3. The powerful force of the welding clamp keeps the clamped sheet metal in place. To remove the fixing clamp, slide the pliers over the clamp and open.
08.0480
HIGH TEMPERATURE PROTECTIVE BLANKET HTD 1000
To protect sensitive components during welding and soldering work.
• Suitable for use under extreme conditions
• Can be used for soldering work on piping
• Resistant to sparks, slag, welding beads and red hot materials
• Asbestos-free
• Resists temperatures up to 1,562 ˚ F, up to 1,832 ˚ F for short periods of time
Size
13" x 20"
40" x 60"
Art #
09843501
0984350
BIONIC SHIELD
• Extended top-of-head coverage
• Superior optics and full face visor designed to maximize visibility and protection
• Suggested for applications requiring dielectric protective equipment
• Built-in chin protection deflects flying particles and debris
• Adjustable head size with a simple turn switch
• Suitable for grinding and sanding
Description
Bionic Shield
Replacement Visor
Art #
0984660
0984661
PICK HAMMER
• Chip away unwanted weld splatter and slag as well as scale, rust and paint from metals
• Steel, .88 lbs.
• DIN 5133
Description
Pick Hammer
Art #
071582400
08.0485
REPLACEMENT PARTS FOR AUTOMATIC WELDER’S HELMET KONTRAST
Accessories/Spare Parts
Description
Front cover lens frame
Pack Qt.
1
Art #
098470012
Helmet no longer available
08.0490
REPLACEMENT PARTS FOR AUTOMATIC WELDER’S HELMET KONTRAST PLUS
(OLD ART.# 0984700)
Accessories/Spare Parts
Description
Front cover lens frame
Pack Qt.
1
Art #
098470012
REPLACEMENT PARTS FOR WURTH SATELLITE WELDING HELMET
(OLD ART.# 0984680)
Accessories/Spare Parts
Description
Front cover lens frame
Pack Qt.
1
Art #
098470012
Helmet no longer available
Helmet no longer available
08.0495
SELF-IGNITING MULTI-FUNCTION HEAT TOOL
Description
Self-Igniting Tool
Art #
1702614
TURBO-LITE
• A specially designed electronic piezo lighter with windproof and weatherproof flame
• Electronic ignition system with safety locking switch
• Powered by standard cigarette lighter butane fuel
• Adjustable flame for low or high temperatures up to 2500ºF (1300ºC)
• 30 minutes run time on each fueling
Description
Turbo-Lite
Art #
1702612
• Designed for automotive and truck repairs, electrical components, electrical panels, circuit board repair, heat shrink tubing, silver solder, cutting nylon rope, foam and much more
• No cords, so it can be used anywhere
• Equivalent to 120 watt soldering iron &
2500ºF (1300ºC) torch
• Ready to use 30 seconds after ignition
• 4 hours run time on each fueling
• See-through fuel tank
ULTRATANE BUTANE FUEL
• Triple refined formula reduces clogging of filters
• Special vapor pressure promotes consistent ignition
• Contains no CFC’s, canister with single-piece universal filling tip
• 15/16 oz. (26.5 grams)
• UPS shipable
Description
Ultratane Butane Fuel
Art #
1892702
08.0500
ULTRA-THERM HEAT GUN
Description
Ultra-Therm Heat Gun
Art #
1702613
HAND HELD MICRO TORCH
• Adjustable high output flame runs a minimum of 60 minutes on each refueling
• Flame temperature up to 2500ºF (1300ºC)
• Piezo electronic ignition system with internal brass and ceramic parts ensure
precision operation and long life
• Body constructed of hi-tech polymers providing a sturdy, yet lightweight feel
Description
Hand Held Micro Torch
Art #
1702616
• Designed for industrial use where high vol- ume heat is required
• The wide nozzle and high-output long life catalyst provide for infinitely adjustable heat levels in a completely portable tool
• The included deflector attachment makes large heavy wall heat shrink tubing a snap to
install
• Can be used almost anywhere you would use a corded heat gun, except NO
EXTENSION CORD
08.0505
PROFESSIONAL HEAT GUN
• Perfect for use with the Dent Lifter Kit
• Stripping and spot drying paint
• Bending and forming plastics
• Speed drying parts
• Removing floor tiles
• Loosening nuts and bolts
• Shrink tubing and packaging
• Shaping vinyl for installation
• Powerful high speed universal motor
• Sturdy die cast housing
• C-UL-US Listed. Made in USA
• Adjustable non-slip stand
Features:
• 1740 Watts
• Weight: 3.5 lbs.
• Temperature settings from 500ºF - 750ºF
• Airflow of 23 CFM at 3000 FPM
• Built-in hand and switch guard
• 6 feet of oil-resistant, grounded neoprene 3 wire cordset
• Double protected element housing
• Wrap-around air intake allowing it to draw air from any position
Description
Heat Gun
Replacement Heat Element
Art #
0702600
0702603
ECONOMY HEAT GUN
• Spot dry paint and primers
• Remove weather stripping without damage to doors
• Soften vinyl tops to stretch material over short areas and remove wrinkles and bubbles
• Soften undercoating for easy removal
• Remove and replace decals
• Speed cure body fillers & cements
• Thaw frozen door locks, radiators
• Loosen rusted fittings
• Shrink seat covers for a perfect fit
• Apply shrink tubing
• Remove adhesive backed side mouldings
Features:
• Two heat settings: 500ºF & 1000ºF
• Lightweight, 1 lb., easy to hold for long periods of time
• Built-in hand guard
• UL listed, safety agency tested & approved for user safety
• Thermoplastic case for high impact durability
• Built-in stand, very stable, allows user to set heat gun down in an
upright position
Description
Economy Heat Gun
Art #
0702590
08.0510
ELECTRIC GLUE GUN
• Used for wood, plastic, metal, ceramics, magnets, leather, paper, cloth and other porous and nonporous materials
• Melts glue twice as fast as regular full size glue guns
• Double heater
• 80 watts of heating power
• Dries in 60 seconds
• No clamping or clean-up required
• Use with Dent Lifter Kit
Description
Electric Glue Gun
Art #
0702100057
GLUE STICKS
• Special adhesive sticks designed for WURTH dent repair systems
• All hot-melt adhesives are UV aging and water-resistant
Designation
Color
Length
Dia. of hot-melt adhesive
Content
Package Qty.
Art. #
Brief Description
Technical Data
Basis
Density
Melting point
Application temperature
Processing time
Hardening time
Shore A hardness
Bonding strength
Shear strength
Tensile strength
Viscosity
Thermal stability
Resistance to cold
Shelf life
High-Strength Hot-Melt Adhesive transparent light brown
195 mm
11.5 mm
10 pc.
180 g.
0890100050
High tensile strength and hardness make it best suited toward small dents. The adhesive material is hygroscopic.
Universal Hot-Melt Adhesive black
180 mm
11.5 mm
24 pc.
500 g.
1890100055
Easiest removal of hot-melt adhesive. Optimum for adapters with a diameter of 21 mm or more. Good adhesion on painted surfaces.
polyamide thermoplastic
0.89 g/cm
3
at +68˚F
+275˚F
+356˚F - 392˚F
20 seconds
30 seconds
77 up to 6.5 N/mm
2 up to 3.5 N/mm
2 up to 140 kg/cm
2
10,000 - 18,000 nPas
+257˚F
-4˚F
24 months
08.0515
polymer-based connection
0.96 g/cm
3
at +68˚F
+185˚F
+374˚F - 410˚F
20 - 45 seconds
30 - 50 seconds
40 ± 20 up to 2.7 N/mm
2
1 - 1.5 N/mm
2 up to 43 kg/cm
2
6,700 nPas
+158˚F
14˚F
24 months
FLUORESCENT WORK LIGHTS WITH ROUGH SERVICE BULB
Cord
Light
25'
25'
30'
40'
40'
50'
50'
N/A
30'
Yes
No
No
N/A
Yes
No
Yes
No
Switch in light head
No
No
Yes
Yes
N/A
No
Yes
No
Yes
Switch in handle
Yes
No
Yes
Yes
N/A
No
Yes
No
Yes
With tool tap outlet
Yes
Reel
Yes
Yes
No
No
---
Yes
No
No
Yes
In line ballast
Cord
No 16/3
Yes 18/2 on reel 16/3
Yes on reel
Yes
No
---
N/A
18/2
18/3
18/2
16/3
---
16/3
Art #
08272550
08272554
08273006
08274023
08274042
08275018
08275019
08279639
08273000
• All parts above the end cap are clear material
to maximize light output
• Twin spring steel hook with cushion tips is
standard
• Tool tap is located away from light head and
hands
• Drip guard protects tool tap when not in use
• Three-way cushion located at top end of the
lamp provides same light as 100 watt incan-
descent
• Large bumpers on handle to protect the light if
dropped
• Convenient on-off button inside of handle to
protect from dirt and grease
• Compact ballast is located in handle to elimi-
nate ballast box on the cord
• Heavy duty oil resistant cord
• Rough service bulbs standard equipment - rated at 10,000 hrs.
ROUGH SERVICE DROPLIGHT BULBS
Description
50w, 130v Standard
100w, 130v Standard
75w, 130v Standard
75w, 130v Toughcoat*
Art #
17200050
172000100
17200070
172000701
*Toughcoat shatter-resistant bulbs reduce liability risks and enable you to comply with FDA and OSHA requirements. Used in automotive drop cords, mechanic trouble lights, extension cords and anywhere else the risk of severe shock may be encountered.
ROUGH SERVICE DROPLIGHT BULBS
• Single-ended plug in base with integral starter and interference suppressor
• Up to 75% less energy cost and heat compared to incandescent lamps
• It’s 13w equals 60w of incandescent
• Helps conform to OSHA requirements
• Made in the USA
• Article # 1720 62000 is silicone injected at the base where standard bulbs fail - rated 10,000
hours
Description
13w Professional Silicone Injected - Rough Service
13w Economy
Art #
172062000
07203900
08.0520
STANDARD DUTY WITHOUT TOOL TAP
Description
25' Cord
50' Cord
Replacement Lens
HEAVY DUTY WITH TOOL TAP
Description
25' Cord
50' Cord
Replacement Lens
HEAVY DUTY ON REEL WITHOUT TOOL TAP
Description
without outlet
Art #
08272554
08275018
08271000
Art #
08272550
08275019
08272000
Art #
08274023
HEAVY DUTY ON REEL WITH TOOL TAP
Description
30' Reel
40' Reel
Art #
08273006
08274042
08.0525
TRIPLE TAP REEL WITH CIRCUIT BREAKER
Description
30' Reel
Art #
08273000
CONVERT A LIGHT
• Easily converts from incandescent to fluorescent.
Description
with Ballast without Ballast
UV LIGHT PROBE WITH UV GLASSES
• Flexible wand gets into tight areas.
• 4 True LED bulbs
• Bright LED technology illuminates brilliant fluorescent glow
• Comfortable ergonomic grip with E-Z access on/off button
• Fluorescent enhancing safety glasses
• 100,000 hour bulb life
Description
UV Light Probe w/ UV Glasses
Art #
08279639
08279666
Art #
1827560
27 LED CORDLESS WORKLIGHT
• Designed to eliminate the need for a corded light
• Slim design allows for easy access to tight places
• Impact resistant polycarbonate tube with non-slip handle
• Produces very little heat, therefore eliminating the possibility of burns to the technician or vehicle components during continuous use
• 27 Super-bright, long-life LEDs provide forward directed pure white light
• Swivel Friction Hook: Swivel hook design allows the light to be positioned in any direction
• Rechargeable: Provides up to 5 hours of continuous operation
• Replaceable board and components
• Charger Included
• Proudly made in North America
• 1 Year Limited Warranty • 60 mAH Battery
08.0530
Description
27 LED Cordless
Worklight
Art #
0764000751
LED RECHARGABLE WORK LAMP
See what you're working on!
Features
• Flexible lamp head tilts up to 180˚
• Three (3) strong built-in magnets to place in high places
• 21 LED’s as main light, 5 LED’s as spotlight
• Light output main light:
1,000 Lux at 0.5 meters
• Light output spotlight:
250 Lux at 0.5 meters
• Lighting duration main light: 8 hours
• Lighting duration spot light: 15 hours
• Battery: rechargable lithium-ion 3.7 V DC,
2,100 mAh
• Charge time: 4 hours
• Includes 230 V charger
2 Suspension Hooks 3 Strong Magnets
5 LED Spot Beam
Description
A
LED Light Replacement Lens - Front Light
B
LED Light Replacement Lens - Top Light
A
Description
LED Rechargable Work Lamp
B
Art #
0827531001
0827531010
Art #
082753110
08.0531
08.0532
COLD SHRINK TAPE
• Water resistant
Your advantages:
• The shrink tape provides various materials with a water and steam proof seal
• Good insulation properties
Your advantages:
• Thanks to its disruptive strength, the tape is highly suitable for insulating cables and electical
lines
• Highly compatible with any insulation and sheathing materials
Your advantages:
• Good compatibility with PE, PVC, butyl, neoprene etc. allows to be used in many different
areas in the automotive and electrical fields
• Highly elastic
Your advantages:
• The tape can be stretched considerably and nestles very close to the material to be pro-
cessed
Applications
• Sealing of pipes and hoses
• Emergency sealing of radiator and gas hoses
• Insulation of electrical lines and cables
• For use in places where heat shrink tubes can no longer be used
• Bundling lines
Base material
Elongation at tear
Application temperature
Temperature resistance
Disruptive strength
Shelf life (at approx. 68˚F and 50% humidity)
UV resistance
Moisture resistance
Polyisobutylene (black)
600%
41˚F to +95˚F
-40˚F to +194˚F
40kV/mm
24 months (store dry, lying and dust-free) conditional given
Notes on application
• The surfaces to be sealed must be dry and free of dust and grease
• Remove PVC cover foil and stretch the tape
considerably
• To achieve problem-free adhesion and a water-proof seal, wrap the tape tightly around the material to be processed and then overlap
• The shrink tape is only conditionally
UV-resistant and should therefore be pro- tected from direct sunlight
Description
Cold Shrink Tape
Art #
19850771
BRUSHABLE ELECTRICAL TAPE
• 4fl oz. brush can
• Protects vehicle wiring from all weather conditions as well as corrosion from salt and calcium
• Flexible waterproof coating
• Easy to use brush applicator
• Coats, seals and insulates
• Won’t crack, fray or unravel like tape
• Great for hard to reach areas
Description
Brushable Electical Tape
Art #
0893198010
08.0535
ELECTRICAL TAPE
• Plasticised PVC tape with good mechanical and electrical properties
• UL/CSA listed for use in electrical insulation application
• Having a modified rubber-resin adhesive coating provides good ageing resistance and high adhe- sion strength
• Suitable for most electrical insulation application in the building, construction, automotive, cycle and marine industries
• Also useful in sealing, binding, protection and decorative application
• Size roll: 3/4 x 60’
• Thickness: 7 mil.
• High quality electrical tape for all your electrical needs
• Suitable for use at no more than 600v and not more than 176 ˚ F
• 10 rolls per sleeve
Description
Electrical Tape
Art #
1985615
IMPORTED ELECTRICAL TAPE
• VDE-tested according to DIN EN 60454-3-1 Type 5
Your advantages:
• Safety thanks to tested properties
• Up to 9kV disruptive strength
• Hardly flammable
• Safe, easy use
Your advantages:
• Tear-proof and resistant to aging
• High flexibility and adhesive strength
• Following assembly, consistently positive properties, even at changing temperatures
• Largely resistant to diluted acid and caustic solution
Application
For insulating, marking electrical cables and securing cable harnesses etc.
Note:
Protect tape from exposure to direct sunlight.
Chemical basis
Thermal stability
Disruptive strength
Minimum shelf life
Acrylate, soft PVC foil
32˚F to +194˚F
9 kV
24 months
3M
®
LINERLESS ELECTRICAL SPLICING TAPE
• Size roll: 3/4” x 15’ x 0.030” thickness
• Moisture sealing
• Insulating
• Flame retardant
Description
3M Linerless Electrical Splicing Tape
Art #
1985617
08.0540
Description
Imported Electrical
Tape
Art #
09856
MOISTURE SEAL TAPE
• Size roll: 2.5” x 10’ x 0.045” thickness
• Moisture proof connectors
• Tough vinyl backing prevents abrasion
• Protects terminal blocks
• Adds strain relief to splices
• Vulcanizes when both tape surfaces meet giving all season, all weather protection
Description
Moisture Seal Tape
Art #
1985616
Place Join Tape Surface
BLACK CLOTH FRICTION TAPE
(Cotton cloth impregnated with a rubber based adhesive)
Applications:
Offers good mechanical protection against abrasion and penetration of low voltage cable, splices and wire. Used for insulation and protection of industrial harnesses and electrical wires from physical damage caused by friction.
Features/Benefits:
Black cotton cloth with non-corrosive rubber resin adhesive. It’s cloth backing makes this tape easily torn by hand and extremely conformable. Highly resistant to humidity and galvanic corrosion.
For contractors who demand a consistent, trouble-free product.
Performance Specifications:
• Maximum Temperature of 176 ˚ F
• Dielectric Strength of 1,000 volts
Description
Black Cloth Friction Tape
Art #
1985620
Sealed Permanently
08.0545
TAPE
1
2
3
6
7
4
5
Style
Nylon Filament Tape
Premium Duct Tape - Grey
Economy Duct Tape - Grey
Premium Duct Tape - Black
Economy Duct Tape - Black
Packing Tape (Brown)
Clear Label Tape
Clear Label Tape
Clear Heavy Duty Label Tape
Width
3/4"
2"
2"
2"
2"
2"
4"
2"
2"
Roll
Yard
60
60
60
60
60
55
72
55
55
Art #
199230030
199230040
199230042
199230041
199230043
199270
199260
199271
199275
• Low tensile, economical fiberglass reinforced filament tape, with an aggressive high shear resistant adhesive system
• Used for palletizing and unitizing currogated and paper board boxes
• Non-critical bundling applications
Art. # 199230030
Backing material
Type of adhesive
Glassfiber &
BOPP
Synthetic rubber
Total thickness
101.6 um
4.0 mils
Adhesion to steel
7.6 N/cm
69.4 oz/in
Elongation at break
4%
Tensile strength
193 N/cm
110.2 lbs.
• 10 mil light industrial grade cloth duct tape used to seal cartons, bind books, repair seats, bundle wires, splice, repair and seal hatch covers and cargo doors in the shipping industry
• Use as a condensation barrier in appliance assemblies
• Tested in accordance with UL 723
• Used in industrial, construction, auto and marine markets
Art. # 199230040
Tensile strength
Adhesion to Stainless
Steel
Thickness
Elongation
Service Temperature
Min
Servive Temperature
Max
Standard
27 lbs/in width
50 oz/in width
10 mils
15%
50˚F
200˚F
Metric
47.3 N/10 mm
5.47 N/10 mm
0.25 mm
15%
10˚C
93˚C
ASTM Test
Method
D 3759
D 3759M
D 3330
D 3330M
D 3652
D3652M
D 3759
D 3759M
N/A
N/A
5
1
2
3
6
7
08.0550
TAPE (CONTINUED)
• 8 mil economy cloth duct tape used for packaging, bundling, sealing, seaming, repairing, holding and waterproofing
• Good adhesion characteristics
• Used in industrial, auto and marine markets
Art. # 199230042
Tensile strength
Adhesion to Stainless
Steel
Thickness
Elongation
Service Temperature
Min
Servive Temperature
Max
Standard
20 lbs/in width
45 oz/in width
8.0 mils
15%
50˚F
200˚F
Metric
35.0 N/10 mm
4.93 N/10 mm
0.20 mm
15%
10˚C
93˚C
ASTM Test
Method
D 3759
D 3759M
D 3330
D 3330M
D 3652
D3652M
D 3759
D 3759M
N/A
N/A
• 10 mil light industrial grade cloth duct tape used to seal cartons, bind books, repair seats, bundle wires, splice, repair and seal hatch covers and cargo doors in the shipping industry
• Use as a condensation barrier in appliance assemblies
• Tested in accordance with UL 723
• Used in industrial, construction, auto and marine markets
Art. # 199230041
Tensile strength
Adhesion to Stainless
Steel
Thickness
Elongation
Standard
27 lbs/in width
50 oz/in width
10 mils
15%
50˚F
Metric
47.3 N/10 mm
5.47 N/10 mm
0.25 mm
15%
10˚C
ASTM Test
Method
D 3759
D 3759M
D 3330
D 3330M
D 3652
D3652M
D 3759
D 3759M
N/A
Service Temperature
Min
Servive Temperature
Max
200˚F 93˚C N/A
08.0555
TAPE (CONTINUED)
• Performance grade, biaxially-oriented polypropylene carton sealing tape
• Characteristics include good impact resistance, very good adhesion and shear resistance on most carton surfaces
• Use for carton sealing, light bundling
• Meets CID A-A-1684C specification
Art. # 199270
Backing material
PP film
Type of adhesive
Total thickness Adhesion to
Synthetic rubber 40 um
1.6 mils
steel
4.8 N/cm
43.9 oz/in
Elongation at break
165%
• Moisture-proof label protection tape for industrial and production laminating, joining, protecting,
covering
• Resists bacteria, fungi, solvents, weathering and yellowing
• Use on industrial and auto markets
Art. # 199260
Tensile strength
Adhesion to Stainless
Steel
Thickness
Elongation
Standard
20 lbs/in width
23 oz/in width
1.8 mils
140%
Metric
35 N/10 mm
2.52 N/10 mm
0.05 mm
140%
-29˚C
ASTM Test
Method
D 3759
D 3759M
D 3330
D 3330M
D 3652
D3652M
D 3759
D 3759M
N/A
Service Temperature
Min
Servive Temperature
Max
Application
Temperature Min
Application
Temperature Max
-20˚F
180˚F
20˚F
110˚F
Adhesion to backing
15 oz/in width
82˚C
-7˚C
43˚C
1.73 N/10 mm
N/A
N/A
N/A
Adhesion to Kraft
9 oz/in width 0.89 N/10 mm
D 3330
D 3330M
D 3330
D 3330M
08.0560
PTFE TAPE
• For sealing pipe joints
• Resistant against all aggressive media
• Temperature resistant from 32ºF to +500ºF
• No sticking or swelling, preventing seizing of threads
• Threaded connections can easily be loosened even after years of service
• DVGW-tested (thickness: 0.1 mm) pursuant to DIN EN 751/3 (97) and DIN 30660 (99)
Description Width
PTFE Thread
Sealing Tape
5/8"
Length
13.2 yards
Thickness in mm
0.08
Surfacebased mass g/m
2
25
Pack.
Qty
Art. #
10
0985030165
PACKAGING TAPE DISPENSER
• Easy to load, durable with anti-reverse bar and blade safety guard for 2” width maximum use
• Ideal for carton sealing
• Recommended
Description
Packaging Tape Dispenser
Art #
1985051
08.0565
HOOK & LOOP FASTENER (ADHESIVE BACK)
VELCRO™ tapes can be attached to end products by a variety of methods, including:
• Sewing (most commonly used).
• Adhesives incl. pressure sensitives.
• Dielectric (heat sealing w/adhesives).
• Heat activation.
• Ultrasonic (welding by molecular vibration).
• Mechanical.
Description
Hook & Loop Fastener
Size
3/4"
Art #
189434
DUAL LOCK FASTENER (ADHESIVE BACK)
Backing/Attachment:
• Pressure sensitive very high bond Scotch VHB acrylic adhesive.
Dwell Time:
• 48 hours minimum, 72 hrs for max. performance.
Operating Temperature:
• -20ºF (-29ºC) -158ºF (70ºC) continuous & -20ºF (-29ºC) -200ºF (93ºC) intermittent.
Description
Dual Lock Fastener
Size
1"
Art #
18949201
STAINLESS STEEL SAFETY LOCK WIRE
Gauge
.032
Weight
1 lb.
Art #
17709507
08.0570
BENCH GRINDING WHEEL
• For general purpose metal grinding and finishing
• Wheels are individually precision ground and balanced, true and faced smooth operation
• All wheels are speed tested
• Includes nested bushings
• 6” x 1” x 1”
• Comes with adapters to fit 1/2”, 5/8” and 3/4” arbors
Description
Bench Grinding Wheel
Art #
16799150
MECHANIC’S SAFETY WIRE
• 18 gauge is good for Body Shops. (Hanging up parts to be painted)
Gauge
18
18
Weight
5 lbs.
2 lbs.
Art #
17709505
17709506
• 14 gauge is good for mechanical shops. (Hanging brake calipers, exhaust, etc.)
Gauge
14
14
Weight
5 lbs.
2 lbs.
Art #
17709508
17709509
08.0575
SNO-BUSTER
CLEAR THE WAY FOR SALES!!
Managers cringe at the thought of a snow storm. They lose valuable selling time during and after a storm while vehicles are hidden beneath a blanket of snow. These managers know how important it is to uncover vehicles to meet sales goals.
The Sno-Buster snow broom enables dealerships to clear hundreds of vehicles completely, quickly and without scratching paint or damaging accessories.
Commercial Quality
The molded head is made of industrial grade polyethylene foam that endures harsh conditions and hundreds of vehicle clearings. Sno-Buster is approved for use on “Class A” finishes and received the highest ratings possible from an independent testing lab for non-abrasiveness, freeze resistance and durability. Manufactured with standard threads, Sno-Buster can be used with your current inventory of broom handles or with extension handles for high roofs.
A Proven Time Saver
Lot crews can work faster and more efficiently because Sno-Buster’s oversized head weighs only 8 ounces. The light weight of the head and handle may avoid costly damage that a heavier tool can cause.
Description
Sno-Buster
Detail
Art #
069594423
08.0580
REUSABLE SEAT COVERS AND FLOORMATS
Description
Seat Cover
Floormat
Art #
0WGE900100
0899500070
TM
TM
These seat covers and floormats are an environmentally-conscious alternative to using disposable plastic. Also, they are cost effective since they can be washed and re-used many times over.
TM
FEATURES
Crafted with durable and long lasting polypropylene material
TM
• Machine washable for continued use
• Keeps your customer’s car seat clean of dirt and oil
Environmentally-conscious alternative
• No wasted disposable plastic
• Re-usable and cost effective
08.0585
PLASTIC MASK SHEETING/CAR COVERS
Size
12' x 400' Sheeting
.9 ml Large Car Cover - 6.5' x 25' - 25/Roll
WHEEL MASKERS
• Protects tire & wheel while painting
• Chemical resistant
• Anti-static additive
• No slip surface on both sides
• 100 per box
Description
Wheel Maskers
FLOOR MATS
• 500 mats per box
• Rugged, plastic coated paper
• Generous size,17” x 22”
Description
Floor Mats
Art #
089977040
089977020
Art #
089977030
Art #
189950036
STEERING WHEEL COVER
• 100 per box
• Keeps steering wheel clean
• Reusable, form fitting
• Chemical resistant
Description
Steering Wheel Cover
Art #
1899500201
08.0590
DISPOSABLE SEAT COVERS
• Standardized design protects bucket,
bench and split seats
• The two-layer design ensures seat covers stay in place
• Keeps upholstery clean
• Non-slip surface on both sides
• Chemical resistant
• Extra large cover fits high back seats
The top (outside) layer of the seat cover is smooth so technicians can “slip” in and out of vehicles easily. This allows them to work faster without the need for extra caution.
The bottom (inside) layer of the seat cover is formulated with a high friction plastic so that it can “grip” itself into place on cloth, leather and carpet. This layer keeps the product in place for continued protection.
Description
Seat Covers - 200 / roll
Seat Covers - 500 / roll
Dispenser
-
Thickness
0.7 mil
0.5 mil
-
Width x Length Art #
32” x 56”
32” x 52”
189950011
189950015
089950006
08.0595
WRECK WRAP
• Vehicle interior is protected from rain, snow, and UV rays
• Adhesive does not transfer to the body of the vehicle when removed
• Film cutter is included
• Great for collision center storage lots!
Size
18" x 100' Roll (includes 2 rolls)
36" x 100' Roll
Art #
189977051
189977050
PROTECTIVE SHEETING
This high density paintable plastic sheeting is corona treated and provides superior protection from overspray and other contaminants. These airborne contaminants adhere to the protective sheeting without flaking and prevent contamination of wet paint during the painting process.
• Clings to vehicle to prevent sheeting from lifting
• Clearly marked paintable side
• Cut to desired length
• Tear resistant, recyclable plastic
• Ultimate bleed through resistance against penetration of solvents, even
paint stripper
• HDPE (high density polyethylene) is twice the strength of LDPE
(low density polyethylene)
• Dispenser box keeps sheeting clean, free of dust, dirt and other
contaminents
Size
16' x 350' Roll
Art #
1899600400
08.0600
SORBENT PADS
Size
15" x 100' Roll (New Larger Roll)
Art #
08858916
• This unique sorbent pad absorbs all liquids
• Use on top of work bench for cleaner repairs
• Prevent employee slippage on oily floors
• Grips floor for Safety/Top and bottom lay- ers of FineFiber are built of densely woven, small-diameter strands of fiber to increase surface area - enabling the Mat to grip the floor and secure it for safer walking
• Virtually indestructible/FineFiber Mat has a layer of MeltBlown polypropylene ultrasoni- cally sandwiched between two FineFiber lay- ers. 3-ply construction resists heavy foot traf-
fic
• Multi-Perforations save you money. Rolls are perfed every 7.5” vertically and every 17”
horizontally
• Helps you comply/29 CFR 1910.22(a)
(2), 29 CFR 1910.107(b)(3), 29 CFR
1910.107(g)(2), 29 CFR 1910.120 (j)(1),
29 CFR 1910.1450 (e)
OIL ONLY SORBENT PADS
• Grips floor for Safety/Top and bottom layers of FineFiber are built of densely woven, small-diam-
eter strands of fiber to increase surface area - enabling the Mat to grip the floor and secure it for
safer walking
• Virtually indestructible/FineFiber Mat has a layer of MeltBlown polypropylene ultrasonically sandwiched between two FineFiber layers. 3-ply construction resists heavy foot traffic
• Multi-Perforations save you money. Rolls are perfed every 7.5” vertically and every 17” horizon-
tally
• Helps you comply/29 CFR 1910.22(a)(2), 29 CFR 1910.107(b)(3), 29 CFR 1910.107(g)(2),
29 CFR 1910.120 (j)(1), 29 CFR 1910.1450 (e)
• Will not absorb water
• Great for boat bilges
Size
15" x 100' Roll (New Larger Roll)
Art #
08858914
08.0605
DRUM TOP SORBENT PAD
• Clean Living/Absorbs drips from leaking pumps and helps keep drum storage areas looking good
• Bung Hole Access/Pre-cut bung holes make for easy access to drum. Pads can be removed and
replaced with pumps and valves installed
• 25 pads per pack
Did You Know...
• Clay doesn’t really absorb: the clay just gets coated with the liquid
• Clay is a known health hazard: Read the warning on the bag. Clay can cause lung damage
• When all is said and done, clay costs more to use and dispose of
• Clay becomes very sticky when used, sticks to your shoes and tracks throughout your shop
Size Qty.
55 Gallon Drum Top Sorbent Pad 25 Pack
30 Gallon Drum Top Sorbent Pad 25 Pack
Art #
08858913
08858912
OIL ABSORBENT PAD
• 100% Polypropylene
• Absorbs oils, hydrobarbons and all petrolium based liquids
• Repels water
• Can be used under leaky valves, machines, etc. or to skim oil from water surfaces
Description
16” x 20” Heavy Weight Pads
16” x 20” Light Weight Pads
Qty
100
200
Art. #
088588810
088588820
08.0610
PARTS BAGS
• 500 per roll
Size/Description
11" x 18"
14" x 22"
Universal Dispenser
ZIPLOC
®
PARTS BAGS
• Heavy duty
• White block area to write on
Size
3" x 5" Zip-lock Bags
9" x 12" Slide-lock Bags
Art #
189990021
189990022
089990020
Art #
189908
189909
DISPOSABLE KEY TAGS
• Made of laminated paper
• Eliminates having piles of keys to sort
• Gives a professional look and saves time for other duties
• Pliable and easy to write on
• Will accept pen or felt marker
• 100 per pack
Description
Disposable Key Tags
Art #
1791100
08.0615
MICROFIBER DETAILING CLOTH
The super-absorbency and magnetic “clinginess” of the microfiber fabrics make it especially well suited for cleaning and beautifying automobiles.
Great for Cleaning:
• Windows
• Car Interiors
• Leather
• Chrome
• Rubber and Plastic
• Monitors
Description
Microfiber Detailing Cloth
Art #
1899810
FULL ABSORPTION TOWEL
Excellent absorption and liquid retention
• Super absorbent, absorbs 50% more fluids and three times faster than typical cloths
• For use on any surface - will not scratch; use to dry vehicle surfaces to prevent water spots
• Purchase multiple towels for a wide array of applications - washing, drying, polishing etc.
• Can be washed and reused
• Perfect for use with our new polishes, both for application and for buffing and detailing
Description
Full Absorption Towel - 25” x 17”
Art #
0899800205
SPECIAL CLEANING CLOTH
• Can be used as a polishing cloth
• Extremely tear resistant, even when wet
• Solvent-resistant
• Fast lint-free
• Very absorbent
• Washable, wringable and reusable
• Safe for food
• Use with Dent Lifter
• Used in car, boat and industrial cleaning
Design
White, 1-ply (size cloth)
Size
11" x 15"
Art #
0899800901
08.0620
ONE WIPE
• Professional Quality, All-Purpose Bonded Cellulose Wipers
• Performance for a wide variety of wiping tasks
• Versatile Leading All-Purpose Substrate
• Ideal for general purpose wiping
• Ultra Absorbent
• Soft Hand Feel
• 225 wipes per box
• Dimensions per wipe - 9” x 12”
Description
One Wipe
Art #
189986886
SMOOTH BLUE WIPE
• Professional Quality, High-Performance Spunlace Towels
• Highly Absorbent
• Chemically Pure
• Reusable Cloth-like towels
• Solvent Resistant
• Superb Wet Strength and Wipe Dry Performance
• Virtually Lint Free
• Textile Performance for the toughest, low lint wiping tasks
• 125 wipes per box
• Dimensions per wipe - 9” x 17”
Description
Smooth Blue Wipe
Art #
189992131
08.0625
WURTH VALVE ADJUSTING TOOLS
• Each blade thickness has a different color, so the blade required can be found easily
• The blade thickness is injected in the plastic handles and therefore cannot blur
• Blade width 13mm, length 45mm, total length 100mm
Color
Purple
White
Blue
Grey
Yellow
Thickness mm
.10
.15
.20
.25
.30
Art #
07135122
07135123
07135124
07135125
07135126
STUD EXTRACTOR
• For removing broken-off studs or threaded bolts. A hole is bored into the parts to be removed
according to the Table and the extractor is screwed in to the left. By means of further tightening the
broken-off part is extracted without damaging the thread.
• Chrome Vanadium, forged
• Comes in plastic box
Size
15mm, dimensions 1-5
Art #
0695684353
STUD DRIVER AND REMOVER
• For rapid fitting and removal of stud bolts with or without thread.
• No damage to bolt through welding on of turning aids (nuts, etc.) or use of pliers.
• No lock nuts needed.
• Positive grip on studs from 10mm long.
• No wearing parts.
• Diameter 25mm, 65mm long.
Applications:
• All motor vehicles, agricultural and building machinery maintenance, fleet operators, motorcycle
dealers, motor and mechanics; engineering, boat building, etc
Fits Stud Size
4 pc. Set
Set Includes: 6, 8, 10 and 12mm
Art #
06904211
08.0630
PLASTIC LINED LUG SOCKETS
• Special design will not mar expensive mag wheels
• Available in 3 sizes for most common lugs
• Plastic sleeve and plastic liner cap
• 1/2” drive
Wrench Size
3 pc. Set
Set Includes:
17 mm
19 mm
21 mm
Plastic Cover
Art #
0713132890
0713132817
0713132819
0713132821
0713132891
WURTH PIN PUNCH SET
• Chrome vanadium air hardened steel
• Tempered safety striking heads will not burr or split
• Shaft all hardened, making it extremely tough and durable
• Includes plastic case
Description
Set includes diameters 2, 3, 4, 6 and 8
Art #
07146341
08.0635
A/C DYE & OIL CARTRIDGE GUNS
• For use with cartridges of A/C dye and A/C oil
• Pre-calibrated to dispense exact amount needed
Description
8 oz. Cartridge Gun
Quickshot Gun
Art #
0891764100
0891764010
DYE SERVICE LABELS
• Affix label to notify the next service technician that dye is present
Description
8 labels
Art #
08929825
FLUSH GUN
• Flow control flush gun for A/C Super Flush Art. # 0892 76402.
Description
Flush Gun
A/C Super Flush
Art #
08911300
089276402
08.0640
A/C DYE INJECTOR ADAPTERS
R-12 Adapter
• Used on older vehicles with R-12 refrigerant. Works with R-134A adapter
R134A adapter hose
• Works in conjunction with the A/C Dye Injection System. Installs on A/C dye cartridge Art. #
0892 764 030
Description
R-12 Adapter
R-134A adapter hose
Art #
0764000019
0764000015
A/C GOO TAPE
• Insulates exposed A/C pipes, tubing, fittings & prevents condensation build-up
Description
A/C Goo Tape
Art #
19852010
CAN TAP HOSE
• Use with Art. # 1892 764300 A/C Leak Stop with Dye
• Hose Length 9”
Description
Can Tap Hose
Art #
0892764305
08.0645
FLAMMABLE STORAGE SAFETY CABINETS
Description
12 Gallon Self Close
30 Gallon Self Close
45 Gallon Self Close
60 Gallon Self Close
90 Gallon Self Close
Price does not include shipping which is FOB El Paso, TX
Size
23 x 18 x 36-3/8
43 x 18 x 45-3/8
43 x 18 x 66-3/8
34 x 34 x 66-3/8
43 x 34 x 66-3/8
2
2
1
2
Shelves Weight
1 155 lbs
229 lbs
375 lbs
415 lbs
505 lbs
Art #
0957900001
0957900003
0957900002
0957900004
0957900005
Cabinets are required by OSHA and
UFC in commercial and industrial facilities where flammable liquids are used and stored. Units conform to NFPA code 30 and OSHA 29 CFR
1910.106 and are FM approved.
• Sturdy all welded double wall steel
construction
• 5 self-closing cabinets
• 60 & 90 gallon models have internal 16 gauge reinforcements
• 2” wide louvers support shelves, adjustable on 4” centers
• 2” deep leak-proof sump
• Safely contains hazardous chemicals, reducing the risk of fire
• Improved security with recessed lockable paddle latch and 3 point locking system
• 2” bunged air vents with flame arrestors on each side of the cabinet allows for ventilation
• Safety yellow powder coat finish
• Additional shelves are available via special
order
08.0654
WURTH STORAGE TRAYS
1
• Holds 2 part and single cartridges upright and secure.
• Enables user to organize according to their specific needs.
• Order trays separately to retrofit customers’ current Aerosol Cabinet.
• Allows user to store partially used cartridges with nozzles attached.
3
4
1
2
5
2
Description
Chemical Cabinet (19-7/8" W x 14-1/4" D x 32-3/4" H)
Aerosol Cabinet (33-3/4" W x 8-1/2" D x 22-1/4" H)
Plastic Repair Poster
Storage Trays
Velcro Buttons
Art #
19665
1955900
19992223
19669100
1999372
5
3
4
08.0655
WURTH BULB RACK
• 4 rows of clear dispenser drawers with adjustable dividers plus a hidden storage area
Width
19"
Replacement Tray
Height
26-3/4"
Depth
4"
Art #
1966720
19667211
HOSE DISPENSER
• A high quality, wall mountable, tubing dispenser system specifically constructed for use with spool
mounted hose
• A convenient ruler on the front of the rack to aid in measuring
• No hose entanglement during unreeling
• No disarray when stocking different types of hoses
Description
Hose Dispenser
Art #
189510
HOSE RACK
• A six position rack created to hold fuel line and wiper tubing
• Free standing or wall mountable
Description
Hose Rack
Art #
189511
08.0660
WIRE SPOOL RACK
• High quality design for the convenient storing and dispensing of spool wire
• Mount on counter, wall or work vehicle with use of lag holes and keyhole slots
• All steel construction, with a red baked enamel finish
• Convenient carrying handle on single rod model
• Plated steel rods for heavy spools
Width
26-1/8"
26-1/8"
Height
10-3/8"
17-7/8"
Depth
5-3/4"
5-3/4"
Art #
1770900150 (6 rolls)
1770900151 (12 rolls)
DOS RACK
• Holds DOS system bottles
• Mount on tool box, work bench or wall
Description
DOS Rack - 7 Compartment
DOS Rack - 14 Compartment
Art #
0891271
0891273141
AEROSOL CAN CADDY
• Holds up to 6 standard sized aerosol cans. Unit can be wall mounted, fastened to a tool box, or placed on a shelf or counter top
• Dimensions: 21-1/2” W x 3-1/8” D x 5-1/4” H
Description
Aerosol Can Caddy
Art #
1966385
08.0665
ORSY
®
WIRE REEL SYSTEM
Description
Small Dispenser
Large Reel System Stars
Small Reel System Stars
Reel Holder
Coil Core Plastic Insert
Art #
0956109
095610902
095610901
095610903
095610904
Dispenser Includes:
• Dispenser assembly
• 5 reel holders - Art. # 0956 10903
• 8 small stars (holds 4 rolls) Art. # 0956
10901
• Mounting hardware
Note:
• Order wire separately.
• Combination shears sold separately Art. #
0714 0314.
CABLE TIE RACK
• For fast, easy and reliable bundling of wires, cables, looms, hoses, etc.
• Preformed leading edge allows fast insertion into buckle
• Absolutely secure with long life
• Resistant to cold, will not crack or deteriorate
• Flame resistant
• Resistant to oil, fats, solvents and many organic substances. Caution when in contact with strong
mineral acids and/or oxidizing chemicals, especially at high temperatures
Material: PA 6.6
Temperature Range: -40
º
to 185
º
F
Durability:
• White: Weather resistant at normal temperatures. For internal applications.
• Black: UV resistant, due to carbon structure. The effect of UV rays is minimized.
Description
Cable Tie Rack
Art #
050205020
08.0670
LARGE ASSORTMENT BOX & INSERTS
• Organize and individualize your parts
inventory to save time and money
• Various inserts offer a variety of compartments
to organize parts
• A blank schematic is included within the
assortment box
• Handle for easy transporting to work site
• Assortment boxes have positive latch locks to
prevent loss of small pieces
• Assortment boxes are made of prime cold
rolled steel with an acid/rust resistant black
baked enamel finish
• Rounded scoops enables easy removal of
small parts
Description
1
Large Box w/ 6 Compartment Tray
2
Large Box w/ 12 Compartment Tray
3
Large Box w/ 16 Compartment Tray
4
Large Box w/ 20 Compartment Tray
5
Large Box w/ 24 Compartment Tray
6
Large Box w/ 32 Compartment Tray
7
Large Box w/ Adjustable Box Inserts
8
Large Box w/ Expandable Inserts
9
Extra Dividers (9 pack) for 195523013
Art #
09559502
195523012
195523016
195523020
195523024
195523032
195523013
195523014
195523011
1 2 3
4 5 6
7 8 9
08.0675
1
2
3
4
5
6
6
1
STORAGE
Description Width
9 Drawer
Storage
Cabinet
Height Depth Drawer
Width
17-1/4" 10-7/8" 11-5/8" 5-3/8"
Utility
Storage
Cabinet
19-7/8" 32-3/4" 14-1/4"
20" 15" 15-3/4" 4 Drawer
Cabinet
18 Comp.
Storage Bin
36 Comp.
Storage Bin
40 Comp.
Storage Bin
9" Deep
40 Comp.
Storage Bin
12" Deep
24"
24"
33-3/4"
33-3/4"
12-3/4"
24"
22-1/2"
22-1/2"
4-3/4"
4-3/4"
9"
12"
4"
4"
Drawer
Height
2-3/4"
4-1/2"
4-1/2"
Drawer
Depth
Extra
Dividers
11-1/4"
196691
Stand Base
19551041
1966801
1966131
Art #
19669
19665
1955104
19662
19661
196640
196613
2 3
4 5
08.0680
6
Stand Sold Separately
Stand Sold Separately
TOOL TROLLEY
• Large and lockable working surface on ball bearing guides
• Unobstructed access to center compartment, with adjustable dividers
• Drawer with ball bearing mechanism
• Sturdy steel construction, lacquer coated
• Working surface completely covered with oil resistant and shock proof rubber
• Round edges, PVC, coated handles
• Excellent quality - Made in Germany
Height
880 mm (34-5/8")
Width
500 mm (19-3/4")
Length
800 mm (31-1/2")
Art #
07159326
19” TOOL BOX
• Large sure-grip handle
• Extra deep bottom storage area
• Extra high lid for increased storage capacity
• Bottom feet keep box clean and dry
• Deluxe, lift-out tote tray
• Fully lockable
Dimensions
19"W x 9-1/2"D x 9-1/2"H
Art #
1695590651
CANVAS TOOL BAG
• Big enough to hold and keep all your necessary tools
• Internal metal frame holds bag wide open
• 10 outside pockets and 14 inside pockets to organize tools and accessories
• Made of rugged 20 oz. canvas material with a hard bottom for better stability
Height
11"
Width
10"
Length
12"
Art #
171593610
TOOL TOTE TRAY
• Large open compartment sample/tool tray with drawer and handle.
Description
Pull out drawer w/ 6 compartments
Overall Tool Tray
Tool Tote Tray
Depth
1-1/2"
Width
12-1/2"
8-1/2"
Length
7-1/4"
14"
Art #
08.0685
071593311
MAGNETIC PARTS BOWL
Simple storage of small parts!
This bowl carefully secures contents on surfaces using plastic-covered magnets.
Plastic dish has an extra-high edge.
Magnetic parts also remain secured in the side position!
Description
Magnetic Parts Bowl
Art #
0714937127
08.0686
MAGNETIC HOLDER FOR IMPACT TOOL & SOCKETS
Keeps the most important tools readily accessible for tire service.
4.6”
(117 mm)
15.6”
(395 mm)
Features
• Four powerful magnets with a holding power of max. 11 lbs. (5 kg).
Ideal for attachment to a lifting platform or toolbox.
• Holds a pneumatic Impact Driver, and up to four socket wrench inserts.
• Coated mounts allow careful and secure storage of tools.
• Sturdy and long-lasting 0.06” (1.6 mm) thick steel, with black powder
coated mounting surface.
For use with
Pneumatic Impact Wrench
(Art.# 07037360)
Description
Magnetic Holder for Impact Tool & Sockets
Width
4” (102 mm)
13.2”
(336 mm)
4” (102 mm)
Height
(Base Plate)
Height
(Total) Depth
13.2” (336 mm) 15.6” (395 mm) 4.6” (117 mm)
Art #
0714937130
MAGTRAY CAN & ACCESSORIES HOLDER
Back View
Features
• Attaches easily to any magnetic metal surface:
tool box, service cart, workshop lift,
tool board, etc.
• 6 rubber-coated heavy-duty magnets (1000-
1200 Gauss) and support edges avoid
scratches on painted surfaces.
• Provides an extra storage option for 2 spray
cans (max. 7cm) and miscellaneous items
(perfect for a box of our gloves, spare
hardware, LED worklight, etc.)
• Heavy-duty 0.81mm powder coated
steel construction
Description
MagTray Can & Accessories Holder
Width Depth
12.2” (310 mm) 2.95” (75 mm)
Art #
0714937129
08.0687
Keeps the most important and frequently used tools readily accessible.
NUISANCE DUST MASKS
• Effectively protects against non-toxic dust
• Doesn’t interfere with breathing or speech
• NOT NIOSH approved
• 50 masks per box
Description
Nuisance Dust Masks
Art #
08991
HALF MASK RESPIRATOR
• Soft sealing flange and forward angled nosepiece easily accommodates eyewear
• Perspiration port reduces facepiece slippage and skin irritation
• Large inhalation port provides lower breathing resistance
Recommended Industries/Use
• Chemical
• Construction
• Food Services
• Forestry
• Manufacturing
• Minicipal Services
• Oil and Gas
• Steel and Metals
• Transportation
• Utilities
• Mining
Hazards
• Airborne Particulates
• Biohazard
• Chemical
• Contamination
• Gas, Vapors, Smoke
• Welding
Regulations
• NIOSH 42 CFR 84
Description
Half Mask Respirator
ORGANIC VAPOR CARTRIDGES
• Cartridges and filters for Half-Mask and Full Facepiece respirators
• Twist Lock cartridges
Recommended Industries/Use
• Agricultural
• Chemical
• Construction
• Food Services
• Government
• Law Enforcement
• Forestry
• Manufacturing
• Medical
• Military
• Mining
• Minicipal Services
• Oil and Gas
• Pharmaceutical
• Steel and Metals
• Transportation
• Utilities
• Welding
• Nuclear
Hazards
• Airborne Particulates
• Chemical
• Contamination
Regulations
• NIOSH 42 CFR 84
Description
• Gas, Vapors, Smoke
Organic Vapor Cartridges
08.0690
Art #
18991430
Art #
18991431
N99 FILTERS
• Screw-on (threaded) cartridges
Recommended Industries/Use
• Agricultural
• Chemical
• Construction
• Fire Protection
• Food Services
• Government
• Law Enforcement
• Forestry
• Manufacturing
• Medical
• Military
Hazards
• Airborne Particulates
• Chemical
• Contamination
• Gas, Vapors, Smoke
• Mining
• Minicipal Services
• Oil and Gas
• Pharmaceutical
• Steel and Metals
• Transportation
• Utilities
• Welding
Regulations
• NIOSH 42 CFR 84
Description
N99
Art #
18991432
P100 FILTERS
• Cartridges and filters for Half-Mask and Full Facepiece respirators
• Twist Lock cartridges
Recommended Industries/Use
• Agricultural
• Chemical
• Construction
• Food Services
• Government
• Law Enforcement
• Forestry
• Manufacturing
• Medical
• Military
Hazards
• Airborne Particulates
• Chemical
• Contamination
• Gas, Vapors, Smoke
• Mining
• Minicipal Services
• Oil and Gas
• Pharmaceutical
• Steel and Metals
• Transportation
• Utilities
• Welding
• Nuclear
Regulations
• NIOSH 42 CFR 84
08.0695
Description
P100
Art #
18991433
DUST FILTRATION MASK
• Multiple size options for wide range and improved fit
• Molded cup design
• Offered in valved
• Incorporate humidity-resistant filter media
• Low breathing resistance
• Lightweight design
• Durable suspension straps
• Optional boomerang nose seal or full seal for secure and comfort fit
Recommended Industries/Use
• Agricultural
• Chemical
• Construction
• Fire Protection
• Food Services
• Law Enforcement
• Forestry
• Manufacturing
• Medical
Hazards
• Airborne Particulates
• Biohazard
• Chemical
• Contamination
• Gas, Vapors, Smoke
• Mining
• Minicipal Services
• Oil and Gas
• Pharmaceutical
• Steel and Metals
• Transportation
• Utilities
• Welding
Regulations
• NIOSH 42 CFR 84
Description
Dust Filtration Mask
DUST & MIST RESPIRATORS WITH EXHALATION VALVE
Easier breathing and less fatigue for your workers means better compliance.
Features
• LPD (low pressure drop) exhalation valve provides easier breathing
• Latex-free, stapled headstraps are strong and durable
• Adjustable contoured nosepiece plus inner foam nosepiece for better fit and comfort
• Strong, double-shell construction
Applications
• Ideal for dusty environments, i.e. grinding, sanding, sweeping, bagging, stone quarrying, metal machining, cement, underground mining, polishing, buffing, lime, poultry and textiles
Regulations
• NIOSH Approved N95
Description
Dust & Mist Respirators w/ Exhalation Valve
Art #
0899120001
08.0700
Art #
189914141
CORDED EAR PLUGS
• Patented dual material design combines firm core for easy handling with soft flanges for comfort and fit
• FlexiFirm stem is easy to grasp, ensuring easy insertion into the ear canal
• SoftFlanges creates comfortable seal in the ear canal for superior comfort and protection
• Unique detachable nylon cord system adapts to virtually any application
• Fine-tune fit for personal comfort and safety
Recommended Industries/Use
• Agricultural
• Chemical
• Construction
• Fire Protection
• Military
• Mining
• Minicipal Services
• Oil and Gas
• Steel and Metals
• Transportation
• Government
• Law Enforcement
• Forestry
• Manufacturing
• Medical
Hazards
• Noise
Regulations
• NIOSH 42 CFR 84
• Utilities
• Welding
Description
Large Corded Ear Plugs
Art #
1899300304
Regulations
• 29 CFR 1910.95 - OSHA Occupational
Noise Exposure (US)
• ANSI S3.19-1974 - Attenuation Test Protocol
(US)
08.0705
ANDROMEDA FULL-VISION GOGGLE
• Innovative two-component technology for reliable protection and maximum wearing comfort
• Large-volume; excellently suited for users who wear glasses
• Panorama field view
• First-class eye climate thanks to optimum ventilation
• Can be combined with half masks
• Highly impact-resistant polycarbonate lens
• Unique coating (outside extremely scratchproof, inside permanently resistant to fogging
• Fast, simple lens changes
• Individually adjustable head strap
• 100% UV protection up to 400 nm
• Complies with EN 166 and EN 170
Description
ANDROMEDA Full-Vision Goggle
Art #
0899102110
HARLEY-DAVIDSON
®
SAFETY EYEWEAR
Silver frame with Blue Mirror Lens
• Contemporary, wrap-around sport styling with a dual lens look, molded inside shields and brow
guards
Description
Harley-Davidson
®
Safety Eyewear
Art #
18992100
BLACK FRAME WITH CLEAR LENS
• High-tech, high style wraps around the face to provide 180 degrees of panoramic vision and excellent side and brow coverage
Description
Black Frame w/ Clear Lens
Art #
18992503
08.0710
SAFETY GLASSES
• Economical and stylish eye protection with sport temples for a fashionable yet comfortable fit
• Sporty- wrap-around design
• Anti-scratch coating
Description
Clear Lens/ Clear Frame
Gray Lens/Gray Frame
Art #
1899700
1899701
SAFETY GLASSES
• Economical and stylish eye protection
• Sporty wrap-around eyewear with unique temples with extra “Flex” built in for increased tension
control
• Anti-scratch coating
Description
Clear Lens/ Clear Frame
Gray Lens/Gray Frame
Art #
1899800
1899801
SAFETY GLASS WITH MAGNIFICATION READER
• Magnification reader
• Nylon frame
• Extra wide bridge
• Black temples
• Hard coated lens, bifocal 1.50
Description
Clear Lens/Black Frame
Art #
18990015
08.0715
SAFETY GLASS ZENON Z13
• Rimless
• Flared bridge
• Light blue temples
• Light blue har coat lens
Description
Light Blue
Art #
18995503
SAFETY GLASSES
• Full Black Frame, two-way adjustable temple with wrap around one piece smoke-colored lens
Color
Smoke/Black
Art. #
18990032
“FLEXYLE”
• Suspended lens provides stylish look, comfort fit, panoramic view and maximum protection
• Lightweight frame
• Newly designed adjustable nose piece provides 3 different angles
• Ratcheting and cushioned temples
Color
Clear
Grey
Art. #
0899103130
0899103131
08.0716
“STYLUS”
• 9.75 base curved lens provides full side protection without distracting seams or traditional type
shields
• Nose buds secure the glass and prevent slipping while providing a pillow soft lift
Color
Clear
Grey
Art. #
0899103128
0899103129
“PROFILO”
• Economical wrap-around single lens
• Soft non-slip rubber temple tips
• Integrated nose piece
Color
Clear
Grey
Art. #
0899103126
0899103127
“TRENDUS”
• Economical lightweight glass offers superior protection
• Integrated nose piece
Color
Clear
Grey
Art. #
0899103132
0899103133
08.0717
“IMPEX”
• Lightweight and economical, the temples are vented
• Available in jumbo sizes for use over prescription glasses
Color
Clear
Art. #
0899103125
EYE PROTECTION
• The lenses are protected with 4A coating: anti-fog, anti-scratch, anti-UV 99.9%, anti-static
• Unique dual lens design
• Adjustable temples
Description
Black Frames
Art #
08991032
08.0718
TYVEK DISPOSABLE PROTECTIVE OVERALL
• Offers protection when working with paint, lacquers, underbody protection, lubricants, polyurethane foams, alkalines, and damp conditions
• Completely lint-free, ideally suitable for paint shop
• Tear and friction resistant even in wet conditions
• Not immediately flammable
• Light and comfortable, full freedom of movement
• Washable
• With zipper and elastic in back and sleeves
Description
Tyvek Disposable Protective Overall - Medium
Tyvek Disposable Protective Overall - Large
Tyvek Disposable Protective Overall - XL
Tyvek Disposable Protective Overall - 2XL
Tyvek Disposable Protective Overall - 3XL
Art #
08990203
08990204
08990205
08990206
08990207
08.0719
DISPOSABLE LATEX GLOVES
• Made of natural latex
• Pre-powdered with corn starch
• Translucent white
• 100 per box
Size
Medium
Large
Extra Large
Medium Non-Powdered
Large Non-Powdered
Extra Large Non-Powdered
BLUE HEAVY DUTY LATEX GLOVES
• Thicker than most other heavy duty gloves
• Avg. 18 mils at the fingertip
• Designed specifically for mechanics
• Textured fingers and palms for enhanced gripping.
• Extra long cuffs
• Polymer coating makes gloves easier to put on and reuse
• Powder free
• 50 per bag
Size
Medium
Large
Extra Large
Art #
1899440140
1899440141
1899440142
1899440150
1899440151
1899440152
Art #
1899440130
1899440131
1899440132
BLACK NITRILE GLOVES
• WURTH high performance industrial grade black nitrile gloves.
• Powder free and latex free. Contain no latex proteins, and no powder that can leave residue.
• Provide superior comfort and strength, combined with unsurpassed tactile sensitivity.
• 3 times the puncture resistance of comparable latex or vinyl gloves.
• Textured for enhanced dexterity.
Size
Medium
Large
Extra Large
Extra Extra Large
Art #
1899440110
1899440111
1899440112
1899440113
08.0720
CAUTION: Components used in making latex gloves may cause an allergic reaction in some people.
CAUTION: Components used in making latex gloves may cause an allergic reaction in some people.
NITRILE GLOVES
• 100% Nitrile gloves
• Strong and sensitive
• Powder free
• Solvent resistant
Size
Medium
Large
Extra Large
Extra Extra Large
• Ambidextrous
• Blue in color
• 100 per box
Art #
1899440120
1899440121
1899440122
1899440123
PVC GLOVES
• Recommended for oils, acids, caustics, greases, most solvents and chemicals
Size
Extra Large
Art #
0899430
NITRILE GLOVE “BASIC”
• Lightly coated nitrile glove
• 100% cotton-interlock lining with rope band
• Liquid, oil, and grease repellent
Application:
General handling, maintenance, assembling
Size
Small
Medium
Large
Extra Large
Art #
089940307
089940308
089940309
089940310
08.0725
NITRILE GLOVE “WELL NIT”
• Nitrile coated gloves
• Seamless 100% nylon carrier texture
Application:
General mechanic works in industry, specialty construction industry, automotive industry, carriage factory and working, wood processing, agriculture, transportation, storage, assembly.
Size
Small
Medium
Large
Extra Large
Art #
089944407
089944408
089944409
089944410
FOAM NITRILE GLOVE “AIRFLEX”
• Grey foam nitrile palm coating on 13 gauge seamless nylon liner
• Good breathing
Application:
General handling, maintenance, assembling
Size
Small
Medium
Large
Extra Large
Extra Extra Large
Art #
0899400414
0899400415
0899400416
0899400417
0899400418
PROTECTIVE GLOVE “DY FLEX”
• Surface hand inside with PU coating
• Carrier fabric made of Dyneema®. Dyneema® is a high-strength polyethylen brin, extreme cut resistant, abrasion-resistant, flexible and comfortable to wear.
Application:
High abrasion and cut resistant. Excellent in touch and good finger-feeling.
Size
Small
Medium
Large
Extra Large
Extra Extra Large
Art #
0899400351
0899400352
0899400353
0899400354
0899400355
08.0730
ASSEMBLY GLOVE “TOUCH”
• 35% cotton and 65% polyester shell
• Coated on one side with PVC dots
Application:
Light to medium mechanical tasks primarily in dry areas, can be used as dirt gloves, for light to medium warehouse work, agriculture and forestry work.
Size
Extra Large
Art #
0899404120
PROTECTIVE GLOVE “MAXCUT”
• Surface hand inside with latex coating
• Carrier fabric made of Kevlar® (made by DuPont).
Kevlar® is a high-strength paraaramid brin, extreme cut resistant, abrasion-resistant and heat
resistant.
Application:
High abrasion and cut resistant. Excellent in touch and good finger-feeling.
Size
Small
Medium
Large
Extra Large
Extra Extra Large
Art #
089945107
089945108
089945109
089945110
089945111
MECHANIC GLOVE “HIGHEND”
• Grotech® Synthetic leather palm
• Elastic spandex superb material and neoprene on back
• Half finger in thumb and forefinger
Application:
General mechanic work, assembly work esp. situations which need to pick up small parts.
Size
Medium
Large
Extra Large
Art #
0899400566
0899400567
0899400568
08.0735
MECHANIC GLOVE “SPEED FIT”
• Syntheic leather (Clarino) on the palm and Spandex /Nylon on the back
Application:
Assembly, material handling, etc.
Size
Medium
Large
Extra Large
Art #
08994003
08994002
08994001
LEATHER GLOVES
• Gun pattern leather palm gloves
• Quality gun cut, grey split leather, no exposed seams in palm “wear area”
• Wing thumb, all leather index finger and thumb, knuckle strap and elastic
Description
Leather Gloves
Art #
0899400
08.0740
TOP COWHIDE GLOVES
High quality leather gloves, very soft
• Especially supple
• Good flexibility and grip
• All-leather index finger
• Sturdy work gloves made from cowhide
• Heavy cotton back and cuff
• Safety elastic on back
• Leather knuckle protection and fingertips
• Completely double-stitched, half cotton lining
Areas of application:
Medium to heavy duty mechanical work. Provides good flexibility and sure grip for activities in metal processing, bodywork, transport, woodworking, repairs, installations and maintenance. Limited suitability in wet conditions.
Description
TOP Cowhide Gloves
Art #
0899402
5 FINGER WELDER’S GLOVES
• Hand inner surface of all-cowhide leather
• Split leather back and cuff
• Universally suited for welding, deburring, general labor
• Very sturdy and durable
• Oil, grease and water repellent
• Total length 35 cm
Description
5 Finger Welder's Gloves
Art #
0984314
08.0745
PRODUCT MEASURING GAUGES
Convenient pocket size gauges can be used for simple size identification of various hardware, brass, etc. WURTH USA offers gauges for measuring screws, wires, brass and other pipe compression fittings, rivets, sheet metal, battery terminals, and drill bits.
Screw and Wire Gauge
This gauge is used to identify common screw head types, diameter, and length.
• Identify the head type from the drawings
• Identify diameter by inserting the screw in the V-cutout and reading the measurement
• Place screw with 90 degree angle into underside of screw head to measure length
• If the screw is countersunk, place screw in the wedge cutout for proper length measurement
Approximate Size: 4-1/2” x 3-1/2”
Description
Screw and Wire Gauge
Art. #
1999191
Pipe and Compression Gauge
Convienient pocket size gauges are used for easy size identification of brass and other pipe fittings.
Has measurements for the tube O.D., pipe thread size, hose I.D., a 5 inch standard ruler, and 45˚ and
37˚ flares on the front side along with a measurement table on the back side.
• Use the Tube O.D. (outer diameter) and I.D. (inner diameter) indentations to measure hose
diameters
• Use the indented circles in the middle of the gauge to measure pipe thread sizes
• Use the 45 and 37 degree corners to identify angles for flared fittings
• Use the thread conversion table on the back as a reference
Approximate size: 7-1/2” x 4”
Makes identifying and measuring brass fittings easy!
Description
Pipe and Compression Gauge
Art. #
1999192
Rivet and Sheet Metal Gauge
This gauge is used to identify the diameter and length of a rivet. It also includes tables for converting typical sheet metal gauge sizes.
• The slots are used to measure the length of the rivet
• The holes are used to measure the diameter of the rivet
• Use sheet metal tables to convert gauge sizes
Approximate Size: 5-1/2” x 3-1/4”
Description
Rivet and Sheet Metal Gauge
Art. #
1999193
08.0750
PRODUCT MEASURING GAUGES (CONT.)
Battery Terminal Gauge
This gauge is used to identify the gauge of a wire, to determine the size of a compression nut, and to measure the length of an insulation strip.
• To determine the correct wire gauge measurement, the technician must strip the outer insulation of the wire
• The correct measurement will then be achieved by laying the stripped wire sideways and sliding it into the V-cutout in the gauge
• Insert peg (numbered tab cutouts on the gauge) in the compression nut to read the thickness and
gauge
• Use the ruler on the top of the gauge to measure insulation strip length
Approximate Size: 5 x 3-3/4”
Description
Battery Terminal Gauge
Art. #
1999194
Drill Bit Gauge
This gauge is used to identify the diameter of common drill bits.
• Simply insert the drill bit into the slot that it most precisely fits to determine the diameter of the drill
bit
Approximate Size: 4-1/2” x 3-3/4”
Description
Drill Bit Gauge
Art. #
1999195
08.0755
Wurth USA Inc.
93 Grant Street
Ramsey, NJ 07446
1-800 WURTH USA (987-8487) www.wurthusa.com
© Wurth USA Inc. 2011
Printed in New Jersey
The information enclosed is privileged and confidential property of WURTH
USA, Inc. Any dissemination, distribution or copying of this communication is strictly prohibited.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project