Advertisement
Advertisement
INSTALLATION INSTRUCTIONS FOR LIGHT FIXTURES WITH MEDIUM-BASE SOCKETS 1. Remove {unscrew} metal cap nuts: from face plate. Lift off face plate exposing wires. Pull house wires through 7/8” access hole in rear of back plate, Make electrical connec- tions, white wire to white wire, black to black. Position on wall and secure with screws (provided) through mounting holes in rear of back plate. Printed in U.S.A, 2. Replace face plate and secure by replacing metal cap nuts. Medium- base bulbs required. Мо. G25-3" or No. G40-5” bulbs recommended except when glass shades are sup- plied with fixture. 60 watt clear standard bulb is then recommended. AGA 59740 7/86 6608 ">

Public link updated
The public link to your chat has been updated.
Advertisement