advertisement
Additional information on this product and answers to frequently asked questions can be found at our
Customer Support Website.
Printed on 100% recycled paper using VOC (Volatile
Organic Compound)-free vegetable oil based ink.
DSC-T30
“Read This First” (separate volume)
Explains the set-up and basic operations for shooting/playback with your camera.
Operating Instructions
Before operating the unit, please read this manual and
“Read This First” (separate volume) thoroughly, and retain it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. DSC-T30
Serial No. ___________________________
© 2006 Sony Corporation
Enjoying
the camera
Using the menu
Using the Setup screen
Using your computer
Printing still images
Connecting your camera to your TV
Troubleshooting
Others
Index
2-675-572-11(1)
WARNING
To reduce fire or shock hazard, do not expose the unit to rain or moisture.
For Customers in the U.S.A.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IMPORTANT SAFEGUARDS
For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference.
Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them.
Use
Power Sources
This set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, or other sources, refer to the operating instructions.
Polarization
This set may be equipped with a polarized ac power cord plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed.
Do not defeat the safety purpose of the polarized plug by forcing it in.
Overloading
Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.
Object and Liquid Entry
Never push objects of any kind into the set through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set.
Attachments
Do not use attachments not recommended by the manufacturer, as they may cause hazards.
Downloaded From camera-usermanual.com Sony Manuals
Cleaning
Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set.
Installation
Water and Moisture
Do not use power-line operated sets near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
Power-Cord Protection
Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance.
Accessories
Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer.
Ventilation
The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered.
– Never cover the slots and openings with a cloth or other materials.
– Never block the slots and openings by placing the set on a bed, sofa, rug, or other similar surface.
– Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
– Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight.
3
Lightning
For added protection for this set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power-line surges.
Service
Damage Requiring Service
Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions:
– When the power cord or plug is damaged or frayed.
– If liquid has been spilled or objects have fallen into the set.
– If the set has been exposed to rain or water.
– If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged.
– If the set does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation.
– When the set exhibits a distinct change in performance – this indicates a need for service.
Servicing
Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
Replacement parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
Safety Check
Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition.
Read this first
CAUTION
Replace the battery with the specified type only. Otherwise, fire or injury may result.
For Customers in the U.S.A. and
Canada
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking
Lithium-Ion batteries.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
For Customers in the U.S.A.
If you have any questions about this product, you may call:
Sony Customer Information Services Center
1-800-222-SONY (7669)
The number below is for the FCC related matters only.
Regulatory Information
Declaration of Conformity
Trade Name: SONY
The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of
FCC Rules.
Model No.: DSC-T30
Responsible Party: Sony Electronics Inc.
For Customers in Europe
Address: 16530 Via Esprillo,
San Diego, CA 92127U.S.A.
Telephone No.: 858-942-2230
This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
Attention
The electromagnetic fields at the specific frequencies may influence the picture and sound of this camera.
operation.
Downloaded From camera-usermanual.com Sony Manuals
5
Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.
Disposal of Old Electrical & Electronic
Equipment (Applicable in the
European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact your local Civic
Office, your household waste disposal service or the shop where you purchased the product.
Notice for customers in the
United Kingdom
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362,
(i.e., marked with an or mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
Notes on using your camera
Types of “Memory Stick” that can be used (not supplied)
The IC recording medium used by this camera is a “Memory Stick Duo”. There are two types of “Memory Stick”.
“Memory Stick Duo”: you can use a
“Memory Stick Duo” with your camera.
“Memory Stick”: you cannot use a
“Memory Stick” with your camera.
Other memory cards cannot be used.
• For details on “Memory Stick Duo”, see page 104.
When using a “Memory Stick Duo” with “Memory Stick” compatible equipment
You can use the “Memory Stick Duo” by inserting it into the Memory Stick Duo
Adaptor (not supplied).
Memory Stick Duo Adaptor
Notes on the “InfoLITHIUM” battery pack
• Charge the battery pack (supplied) before using the camera for the first time. ( t
step 1 in “Read
This First”)
• The battery pack can be charged even if it is not completely discharged. Also, even if the battery pack is not fully charged, you can use the partially charged capacity of the battery pack as is.
• If you do not intend to use the battery pack for a long time, use up the existing charge and remove it from your camera, then store it in a cool, dry place. This is to maintain the battery
• For details on the usable battery pack, see page 106.
Carl Zeiss lens
This camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp images with excellent contrast.
The lens for this camera has been produced under a quality assurance system certified by Carl Zeiss in accordance with the quality standards of Carl Zeiss in Germany.
No compensation for contents of the recording
The contents of the recording cannot be compensated for if recording or playback is not possible due to a malfunction of your camera or recording media, etc.
Internal memory and “Memory Stick
Duo” back up
Do not turn off the camera or remove the battery pack or “Memory Stick Duo” while the access lamp is lighted, as the internal memory data or “Memory Stick Duo” data may be destroyed. Always protect your data
by making a back up copy. See page 26 for
the data back up method.
Notes on recording/playback
• This camera is neither dust-proof, nor splash-
proof, nor water-proof. Read “Precautions”
(page 108) before operating the camera.
• Before you record one-time events, make a trial recording to make sure that the camera is working correctly.
• Be careful not to get the camera wet. Water entering the inside of the camera may cause malfunctions which in some cases may not be repairable.
• Do not aim the camera at the sun or other bright light. It may cause the malfunction of your camera.
Downloaded From camera-usermanual.com Sony Manuals
7
• Do not use the camera near a location that generates strong radio waves or emits radiation.
The camera may not be able to record or play back properly.
• Using the camera in sandy or dusty locations may cause malfunctions.
• If moisture condensation occurs, remove it
before using the camera (page 108).
• Do not shake or strike the camera. In addition to malfunctions and an inability to record images, this may render the recording medium unusable, or cause image data breakdown, damage or loss.
• Clean the flash surface before use. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.
Notes on the LCD screen and lens
• The LCD screen is manufactured using extremely high-precision technology so over
99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen and the LCD finder. These points are normal in the manufacturing process and do not affect the recording in any way.
On image data compatibility
• This camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and
Information Technology Industries
Association).
• Playback of images recorded with your camera on other equipment and playback of images recorded or edited with other equipment on your camera are not guaranteed.
Warning on copyright
Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.
The pictures used in this manual
The photographs used as examples of pictures in this manual are reproduced images, and are not actual images shot using this camera.
Black, white, red, blue or green points
• Exposing the LCD screen or the lens to direct sunlight for long periods may cause malfunctions. Be careful when placing the camera near a window or outdoors.
• Do not press against the LCD screen. The screen may be discolored and that may cause a malfunction.
• Images may trail across on the LCD screen in a cold location. This is not a malfunction.
• Be careful not to bump the lens, and be careful not to apply force to it.
For full use of the digital still camera
Prepare the camera and shoot images easily
“Read This First” (separate volume)
1 Prepare the battery pack
2 Turn the camera on/set the clock
3 Insert a “Memory Stick Duo” (not supplied)
4 Select the image size for use
5 Shoot images easily (Auto adjustment mode)
Shoot still images (Scene Selection)
6 View/delete images
Get more friendly with your camera
This manual
•
Shoot with your favorite settings (Program auto shooting)
•
Enjoy your images using the Slide Show
•
Enjoy various shooting/playback using the menu
•
Change the default settings t page 51
Connect your camera to a PC or a printer
This manual
•
Copy your images to a computer and enjoy editing them in
•
Print images by connecting your camera directly to a printer
(PictBridge compliant printers only) t page 81
Downloaded From camera-usermanual.com Sony Manuals
9
Table of contents
Notes on using your camera ..................................................................... 7
Enjoying the camera
Basic techniques for better images ......................................................... 13
Focus – Focusing on a subject successfully................................................... 13
Quality – On “image quality” and “image size” ............................................... 15
Changing the screen display................................................................... 23
Number of still images and recording time of movies ............................. 24
Battery life and number of images that can be recorded/viewed ............ 27
Using the menu
Using menu items
.............................................................................. 33
Menu items
.......................................................................................... 34
M
Using the Setup screen
Using Setup items
..............................................................................51
1
2
Internal Memory Tool .........................................................................56
Memory Stick Tool .............................................................................57
1
2
Downloaded From camera-usermanual.com Sony Manuals
11
Using your computer
Enjoying your Windows computer........................................................... 63
Installing the software (supplied) ............................................................ 65
Copying images to your computer .......................................................... 66
Viewing image files stored on a computer with your camera (using a
Using the “Cyber-shot Viewer” (supplied) ............................................... 73
Using the “Music Transfer” (supplied) ..................................................... 77
Using your Macintosh computer ............................................................. 78
Printing still images
Printing images directly using a PictBridge compliant printer ................. 81
Connecting your camera to your TV
Viewing images on a TV screen ............................................................. 87
Warning indicators and messages........................................................ 101
On the “Memory Stick” .......................................................................... 104
On the “InfoLITHIUM” battery pack....................................................... 106
On the battery charger.......................................................................... 107
Focus
Enjoying the camera
Basic techniques for better images
Exposure Color Quality
This section describes the basics so you can enjoy your camera. It tells you how to use various camera functions such as the mode
switch (page 28), the menus (page 33), and so
on.
Focus Focusing on a subject successfully
When you press the shutter button halfway down, the camera adjusts the focus automatically
(Auto Focus). Remember to press the shutter button only halfway down.
Press the shutter button fully down straight away.
Press the shutter button halfway down.
AE/AF lock indicator
Indicator flashing ,
Indicator lit/beeps
60min
Then press the shutter button fully down.
To shoot a still image difficult to focus on t
If the image looks blurred even after focusing, it may be because of camera shake. t
See
“Hints for preventing blur” (as follows).
Hints for preventing blur
Hold the camera steady, keeping your arms at your side. It is recommended to lean against a tree or a building nearby to steady yourself. Shooting with a 2-second delay self-timer, activating the anti-blur function, or using a tripod is also effective. Use the flash when you shoot under a low light condition.
Downloaded From camera-usermanual.com Sony Manuals
13
Exposure
Adjusting the light intensity
You can create various images by adjusting the exposure and the ISO sensitivity. Exposure is the amount of light that the camera will receive when you release the shutter.
Exposure:
Shutter speed = Length of time the camera receives light
Aperture = Size of the opening allowing light to pass through
ISO =
Recording sensitivity
Overexposure
= too much light
Whitish image
Correct exposure
Underexposure
= too little light
Darker image
The exposure is automatically set to the proper value in the auto adjustment mode.
However, you can adjust it manually using the functions below.
Adjusting EV:
Allows you to adjust the exposure determined by the camera.
Metering Mode:
Allows you to change the part of the subject to be measured to determine the
Adjusting the ISO sensitivity
ISO is unit of measurement (sensitivity), estimating how much light an image pickup device
(equivalent to photo films) receives. Even when the exposure is the same, images differ depending on the ISO sensitivity.
To adjust the ISO sensitivity
High ISO sensitivity
Records a bright image even when shooting in a dark location.
However, the image tends to become noisy.
Low ISO sensitivity
Records a smoother image.
However, when the exposure is insufficient, the image may become darker.
Color
On the effects of lighting
The apparent color of the subject is affected by the lighting conditions.
Example: The color of an image affected by light sources
Weather/lighting Daylight Cloudy Fluorescent Incandescent
Characteristics of light
White (standard) Bluish Blue-tinged
The color tones are adjusted automatically in the auto adjustment mode.
However, you can adjust color tones manually with [White Bal] (page 40).
Reddish
Quality
On “image quality” and “image size”
A digital image is made up of a collection of small dots called pixels.
If it contains a large number of pixels, the picture becomes large, it takes up more memory, and the image is displayed in fine detail. “Image size” is shown by the number of pixels.
Although you cannot see the differences on the screen of the camera, the fine detail and data processing time differ when the image is printed or displayed on a computer screen.
Description of the pixels and the image size
3072
1 Image size: 7M
3072 pixels × 2304 pixels = 7,077,888 pixels
640
2
Image size: VGA(E-Mail)
640 pixels × 480 pixels = 307,200 pixels
Pixels
Downloaded From camera-usermanual.com Sony Manuals
15
Selecting the image size for use (t step 4 in “Read This First”)
Pixel
Many pixels (Fine image quality and large file size)
Example: Printing in up to A3 size
Few pixels (Rough image quality but small file size)
Example: An attached image to be sent by email
The default settings are marked with .
Image size
7M (3072×2304)
3:2
1)
(3072×2048)
5M (2592×1944)
3M (2048×1536)
Larger
Usage guidelines
Up to A3/11×17" print
Match 3:2 Aspect Ratio
Up to A4/8×10" print
Up to 13×18cm/5×7" print
2M (1632×1224) Up to 10×15cm/4×6" print
VGA (640×480)
16:9
2)
(1920×1080)
Smaller
For E-mail
Display On 16:9 HDTV
3)
1) Images are recorded in 3:2 aspect ratio, same as photograph printing paper or postcards, etc.
2) Both edges of the image may be cut off when printing. (page 98).
3) By using a Memory Stick slot or USB connection, you can enjoy images in higher quality.
Movie image size
640(Fine) (640×480)
Frame/Second
Approx. 30
640(Standard) (640×480) Approx. 17
Usage guidelines
Display on TV (high quality)
Display on TV (standard)
160 (160×112) Approx. 8 For E-mail
• The larger the image size, the higher the image quality.
• The more frames per second you played back, the smoother playback can be.
Selecting the image quality (compression ratio) in combination (page 41)
You can select the compression ratio when digital images are saved. When you select a high compression ratio, the image lacks the fineness of detail, but has a smaller file size.
Identifying parts
See the pages in parentheses for details of operation.
1
2
3
5
6
4
7
8
9
1
2
3
4
5
6
7
8
A
(STEADY SHOT) button ( t
step 5
in “Read This First”)
B Shutter button ( t
step 5 in “Read This
First”)
C POWER button/POWER lamp ( t
step
2 in “Read This First”)
D Hook for wrist strap ( t
“Read This
First”)
E Microphone
F Flash ( t
step 5 in “Read This First”)
G Lens
H Self-timer lamp ( t
step 5 in “Read This
I Lens cover ( t
step 2 in “Read This
First”)
9 0 qa qs qdqf qg qh
C For shooting: Zoom (W/T) button
( t
step 5 in “Read This First”)
For viewing: / (Playback zoom) button/ (Index) button ( t
step 6 in
“Read This First”)
E
(Screen display switch) button (23)
F Control button
Menu on: v/V/b/B/ z
( t
step 2 in
“Read This First”)
Menu off: / / / ( t
step 5 in
“Read This First”)
G
H
(Image Size/Delete) button
( t
step 4 and 6 in “Read This First”)
I Battery pack/“Memory Stick Duo” cover ( t
step 1 and 3 in “Read This
First”)
J Access lamp ( t
step 4 in “Read This
First”)
K “Memory Stick Duo” slot
( t
step 3 in “Read This First”)
Downloaded From camera-usermanual.com Sony Manuals
17
L Battery insertion slot
( t
step 1 in “Read This First”)
M Battery eject lever
( t
step 1 in “Read This First”)
N Multi connector (bottom)
When using an AC-LS5K AC Adaptor
(not supplied)
Cable for multi-use terminal v mark
2
To the multi connector
1
To DC IN jack
3
To wall outlet
• You cannot charge the battery pack by connecting your camera to the AC-LS5K
AC Adaptor. Use the battery charger to charge the battery pack.
( t step 1 in “Read This First”)
O Speaker
P Tripod receptacle (bottom)
• Use a tripod with a screw length of less than
5.5 mm (7/32 inch). You will be unable to firmly secure the camera to tripods having screws longer than 5.5 mm (7/32 inch), and may damage the camera.
Indicators on the screen
See the pages in parentheses for details of operation.
When shooting still images
60min
1 3
4
5
Display
SL
Indication
Camera mode (Scene
Selection) ( t
step 5 in
“Read This First”)
Camera mode (Program)
Flash mode ( t
step 5 in
“Read This First”)
Flash charging
Zoom scaling ( t
in “Read This First”)
1.3
2
A
Display
60min
z
M
BRK
WB
STBY
REC
When shooting movies
1
2
60min
STBY
Indication
Battery remaining ( t
step
1 in “Read This First”)
AE/AF lock ( t
step 5 in
“Read This First”)
Standby/Recording a movie
( t
step 5 in “Read This
First”)
3
4
5
ON
VIVID
NATURAL
SEPIA B&W
B
Display
S A F M A F
1.0m
Indication
Macro/Magnifying Glass
( t
step 5 in “Read This
First”)
AF range finder frame
STEADY SHOT OFF ( t
step 5 in “Read This First”)
Downloaded From camera-usermanual.com Sony Manuals
19
C
Display
7M 3:2 5M
3M 2M 1M
VGA
FINE
6 4 0
16:9
STD
6 4 0
1 6 0
FINE STD
101
00:00:00
[00:28:05]
1/30"
400
C:32:00
Indication
Image size ( t
step 4 in
“Read This First”)
•
1M
is displayed only when the Multi Burst is activated.
• This does not appear when using internal memory.
Remaining internal
Remaining “Memory
Recording time [maximum
Remaining number of
Self-timer ( t
step 5 in
“Read This First”)
Self-diagnosis display
±0.7EV
D
Display
E
Indication
• Indicates vibration may prevent you from shooting clear images due to insufficient lighting. Even if the vibration warning appears, you can still shoot images. However, we recommend that you turn on the anti-blur function, using the flash for better lighting or using a tripod or other means to stabilize the camera.
Display
+
E
Display
Indication
Spot metering cross hair
Indication
125
F3.5
+2.0EV
(not displayed on the screen on the previous page)
NR slow shutter
• When using the shutter speed set to 1/25 socond or slower, the NR slow shutter function activates automatically to reduce the picture noise.
Shutter speed
Aperture value
When playing back still images
60min
1
1.3
M
VGA
101
C:32:00
101
12/12
+2.0EV
500 F3.5
3
4
2
BACK/NEXT
2006 1 1 9: 30 AM
VOLUME
5
When playing back movies
60min
1 3
2
4
5
A
Display
60min
M
7M 3:2 5M
3M 2M 1M
VGA
FINE
6 4 0
16:9
STD
6 4 0
1 6 0
-
Step
1.3
12/16
N
Indication
Battery remaining ( t
step
1 in “Read This First”)
Image size ( t
step 4 in
“Read This First”)
Print order (DPOF) mark
• This does not appear when using internal memory.
Zoom scaling ( t
step 6 in
“Read This First”)
Frame by frame playback
Playback ( t
step 6 in
“Read This First”)
Volume ( t
step 6 in “Read
This First”)
B
Display
101-0012
Indication
Playback bar ( t
step 6 in
“Read This First”)
Downloaded From camera-usermanual.com Sony Manuals
21
C
Display
101
101
8/8 12/12
C:32:00
00:00:12
D
Display
+2.0EV
WB
500
F3.5
Indication
• This does not appear when using internal memory.
• This does not appear when using internal memory.
Remaining internal
Remaining “Memory
Image number/Number of images recorded in selected folder
Self-diagnosis display
Counter ( t
step 6 in “Read
This First”)
Indication
• Do not disconnect the cable for multi-use terminal while the icon is displayed.
Flash
Shutter speed
Aperture value
Playback image ( t
step 6
in “Read This First”)
E
Display Indication
• appears when histogram display is disabled.
2006 1 1
9:30 AM
DPOF
Recorded date/time of the playback image
z PAUSE z PLAY
BACK/
NEXT
Playing back Multi Burst
Select images
VOLUME Adjust volume
Changing the screen display
Each time you press the switch) button, the display changes as follows.
Histogram on
60min
Indicators off
(Screen display
Histogram display
• By pressing (Screen display switch) button longer, you can increase the LCD backlight.
• When you set the histogram display to on, image information is displayed during playback.
• The histogram does not appear in the following situations:
While shooting
– When the menu is displayed.
– When recording movies
During playback
– When the menu is displayed.
– In index mode
– When you are using playback zoom.
– When you are rotating still images.
– During playback of movies
• A large difference in the histogram displayed when shooting and during playback may occur when:
– The flash strobes.
– The shutter speed is slow or high.
• The histogram may not appear for images recorded using other cameras.
Indicators on
60min
Downloaded From camera-usermanual.com Sony Manuals
23
Number of still images and recording time of movies
The tables show the approximate number of still images and the length of time for movies that can be recorded on a “Memory Stick Duo” formatted with this camera. The values may vary depending on the shooting conditions.
For image size and quality, see page 15 in this manual and step 4 in “Read This First”.
The number of still images (The image quality is [Fine] on the upper line and
[Standard] on the lower line.)
(Units: Images)
Capacity
32MB 64MB 128MB 256MB 512MB 1GB 2GB
Size
7M
3:2
5M
3M
2M
VGA
16:9
33
61
196
491
33
61
12
23
20
37
9
18
9
18
66
123
394
985
66
123
25
48
41
74
18
36
18
36
133
246
790
1975
133
246
51
96
82
149
37
73
37
73
238
446
1428
3571
238
446
92
174
148
264
67
132
67
132
484
907
2904
7261
484
907
188
354
302
537
137
268
137
268
988
1852
5928
14821
988
1852
384
723
617
1097
279
548
279
548
2025
3798
12154
30385
2025
3798
573
1125
573
1125
789
1482
1266
2250
• The number of images listed is for when [Mode] is set to [Normal].
• When the number of remaining shootable images is greater than 9,999, the “>9999” indicator appears.
• You can resize the images later ([Resize], page 47).
The recording time of movies
Capacity
Size
640(Fine)
640(Standard)
160
32MB 64MB 128MB 256MB
(Units: hour : minute : second)
512MB 1GB 2GB
– – – 0:02:50 0:06:00 0:12:20 0:25:10
0:01:20 0:02:50 0:05:50 0:10:40 0:21:40 0:44:20 1:31:00
0:22:40 0:45:30 1:31:30 2:51:20 5:47:00 11:44:20 24:18:20
• Movies with the size set to [640(Fine)] can only be recorded on a “Memory Stick PRO Duo”.
• When images recorded using earlier Sony models are played back on this camera, the display may differ from the actual image size.
When you do not have a “Memory Stick Duo”
(Recording with the internal memory)
The camera has 58 MB of internal memory. This memory is not removable. Even when there is no “Memory Stick Duo” inserted in the camera, you can record images using this internal memory.
• Movies with the image size set to [640(Fine)] cannot be recorded using the internal memory.
When a “Memory Stick Duo” is inserted
B
[Recording]: Images are recorded on the “Memory Stick
Duo”.
[Playback]: Images on the “Memory Stick Duo” are played back.
[Menu, Setup, etc.]: Various functions can be performed on images on the “Memory Stick Duo”.
B
Internal memory
When there is no “Memory Stick Duo” inserted
[Recording]: Images are recorded using the internal memory.
[Playback]: Images stored in the internal memory are played back.
[Menu, Setup, etc.]: Various functions can be performed on images in the internal memory.
Recordable number of still images and time of movies in the Internal Memory are as follows.
The number of still images (The image quality is [Fine] on the upper line and
[Standard] on the lower line.)
(Units: Images)
Size
7M 3:2 5M 3M 2M VGA 16:9
Capacity
58MB 16
33
16
33
23
43
37
67
60
111
357
892
60
111
The recording time of movies
(Units: hour : minute : second)
Size
640 (Standard) 160
Capacity
58MB 0:02:30 0:42:40
Downloaded From camera-usermanual.com Sony Manuals
25
On image data stored in the internal memory
We recommend that you copy (back up) data without error using one of the following methods.
To copy (back up) data on a “Memory Stick Duo”
Prepare a “Memory Stick Duo” with a capacity of 64 MB or more, then perform the procedure
explained in [Copy] (page 58).
To copy (back up) data on a hard disk of your computer
Perform the procedure on pages 66 to 70 without a “Memory Stick Duo” inserted in the
camera.
• You cannot copy image data on a “Memory Stick Duo” to the internal memory.
• By connecting the camera and a computer with a cable for multi-use terminal, you can copy data stored in the internal memory to a computer. However you cannot copy data on a computer to the internal memory.
Battery life and number of images that can be recorded/viewed
The tables show the approximate number of images that can be recorded/viewed and the battery life when you shoot images in
[Normal] mode with the battery pack
(supplied) at full capacity and at an ambient temperature of 25°C (77°F). The numbers of images that can be recorded or viewed take into account changing the “Memory
Stick Duo” as necessary.
Note that the actual numbers may be less than those indicated in the table depending on the conditions of use.
• Battery capacity decreases as you use it more, as
• The number of images that can be recorded/ viewed and the battery life are decreased under the following conditions:
– The surrounding temperature is low.
– The flash is used frequently.
– The camera has been turned on and off many times.
– The zoom is used frequently.
– The brightness of LCD Backlight is set to up.
– [AF Mode] is set to [Monitor].
– [STEADY SHOT] is set to [Continuous].
– The battery power is low.
When viewing still images
No. of images Battery life (min.)
Approx. 8000 Approx. 400
• Viewing single images in order at about three second intervals
When shooting movies
Battery life (min.)
Approx. 200
• Shooting movies continuously with an image size of [160]
When shooting still images
No. of images Battery life (min.)
Approx. 420 Approx. 210
• Shooting in the following situations:
– (P.Quality) is set to [Fine].
– [AF Mode] is set to [Single].
– [STEADY SHOT] is set to [Shooting].
– Shooting once every 30 seconds.
– The zoom is switched alternately between the
W and T ends.
– The flash strobes once every two times.
– The power turns on and off once every ten times.
• The measurement method is based on the CIPA standard.
(CIPA: Camera & Imaging Products
Association)
• The number of images/battery life does not change, regardless of image size.
Downloaded From camera-usermanual.com Sony Manuals
27
Using the mode switch
Set the mode switch to the desired function.
Still image shooting modes
Auto: Auto adjustment mode
Allows easy shooting with the settings adjusted automatically. t
step 5 in “Read This
First”
Program: Program auto shooting mode
Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value). Also you can select various settings using the menu.
(For details on the available functions
: Scene Selection mode
Allows you to shoot with the preset settings according to the scene. t
step 5 in “Read
This First”
• To change the shooting mode
Playback/Edit
t
step 6 in “Read This First”
Shooting movies
t
step 5 in “Read This First”
Mode switch
Control button
After page 36, the available mode position for the menu items is shown as follows.
Unavailable Available
Scene Selection
For details t
step 5 in “Read This First”
For shooting an image appropriately according to the scene condition, a combination of functions is determined by the camera.
( : you can select the desired setting)
Macro/
Magnifying
Glass
/—
—/—
/—
/—
Flash
SL
AF range finder
Focus preset
White
Balance
Flash level
Burst/
Exposure Bracket/
Multi Burst
—
— —
—/—
/—
/—
/—
—/—
/
/
/
/
— — —
Downloaded From camera-usermanual.com Sony Manuals
29
Using the Slide Show
By simply pressing button, you can enjoy continuous image playback accompanied by effects and music (Slide Show).
c c
1
Set the mode switch to .
2
Press .
3
Slide show starts.
To adjust the volume of the music
Press v/V to adjust the volume.
To pause the slide show
Press z on the control button.
To restart, select [Continue], then press z.
•
The slide show resumes from the image which was paused, however, the music starts again from the beginning.
min
Slide Show
Pause
VGA
2/9
Continue
Exit
BACK/NEXT
To display the previous/next image
Press b/B during pause.
To end the slide show
Press either or select [Exit] with V during pause, then press z.
•
You cannot play back a slide show while using PictBridge connecting.
To change the setting
You can select the desired setting for the slide show. Also, you can start the slide show again.
1
Press the MENU button to display the menu.
2
Select (Slide) with b/B on the control button, then press z.
min
VGA
Interval
Repeat
Image
Music
Effects
Slide Show
Auto
On
Folder
Music3
Stylish
Cancel
2/9
Start
3
Select the item you want to set with v/V, then select the desired item with b/B.
4
Select [Start] with V/B, then press z.
The slide show starts.
If you do not want to start the slide show immediately, press [Cancel].
• The selected setting remains until the next setting is assigned.
The following settings are available.
The default settings are marked with .
Effects
Simple
Nostalgic
Stylish
Active
Normal
A simple slide show suitable for a wide range of scenes.
A moody slide show reproducing the atmosphere of a movie scene.
A stylish slide show proceeding at a middle tempo.
A high-tempo slide show suitable for active scenes.
A basic slide show switching images at a predetermined interval.
• When set to [Simple], [Nostalgic], [Stylish] or [Active]:
– Only still images are displayed.
– When images are shot by Multi Burst, the first frame of continuous images is displayed.
• Music is not played (set to [Off]) during a [Normal] slide show. The sound of movies will be heard.
Music
The preset-Music differs depending on the effect you select.
Music 1
Music 2
Music 3
Music 4
Off
The default setting for a [Simple] slide show.
The default setting for a [Nostalgic] slide show.
The default setting for a [Stylish] slide show.
The default setting for a [Active] slide show.
Setting for a [Normal] slide show. No Music available.
Downloaded From camera-usermanual.com Sony Manuals
31
Image
Folder
All
Repeat
On
Off
Plays back all the images in the selected folder.
Plays back all the images in a “Memory Stick Duo” in order.
Plays back images in a continuous loop.
After all the images have been played back, the slide show ends.
Interval
3 sec
5 sec
10 sec
30 sec
1 min
Sets the display interval of images for a [Normal] slide show.
Start
Cancel
Starts the slide show.
Cancels the slide show.
z To add /change Music files
You can transfer a desired music file from your CDs or MP3 files to the camera to play back during Slide show. You can transfer the music by [Download Music] in (Setup) using the software “Music Transfer”
(supplied) installed on a computer. For details, see pages 77 and 79.
• You can record up to four pieces of music on the camera (The four preset pieces (Music 1-4) can be replaced with the ones you transferred).
• A maximum length of each music file for music playback of the camera is 180 seconds.
• If you cannot play back a Music file due to damage or other malfunctions to the file, execute [Format
Music] (page 59) and transfer the music again.
Using the menu
Using menu items
v/V/b/B button
Mode switch z button
MENU button
Control button
1
Turn on the power and set the mode switch.
Different items are available depending on the position of the mode switch and the (Camera) menu settings.
2
Press MENU to display the menu.
3
Select the desired menu item with b/B
on the control button.
• If the desired item is invisible, keep pressing b/B until the item appears on the screen.
• Press z after selecting an item when the mode switch is set to .
4
Select a setting with v/V.
The setting you select is zoomed and set.
5
Press MENU to hide the menu.
400
200
100
80
Auto
ISO
ISO
Mode BRK M
To change the current mode to the shooting mode
You can also hide the menu by pressing the shutter button halfway down.
• If there is an item that is not displayed, an v/V mark appears on the edges of the location where menu items usually appear. To display an item that is not displayed, select the mark with the control button.
• You cannot set items that are not available to select.
Downloaded From camera-usermanual.com Sony Manuals
33
Menu items
For details on the operation
1
The available menu items vary depending on the mode switch position. Only the available items are displayed on the screen.
( : available)
Mode switch position:
Auto Program Scene
Menu for shooting
(Camera)
COLOR (Color Mode)
(EV)
9 (Focus)
(Metering Mode)
WB (White Bal)
ISO
(P.Quality)
Mode (REC Mode)
BRK (Bracket Step)
M
(Interval)
(Flash Level)
(Contrast)
(Sharpness)
(Setup)
—
—
—
—
—
—
—
—
—
—
—
—
—
*
—
—
*
*
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
For details on the operation
1
Menu for viewing
(Folder)
(Protect)
DPOF
(Print)
(Slide)
(Resize)
(Rotate)
(Divide)
(Setup)
Trimming**
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
* The operation is limited according to the Scene mode (page 29).
** Available only for playback zoom.
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Downloaded From camera-usermanual.com Sony Manuals
35
Shooting menu
For details on the operation
1
The default settings are marked with .
(Camera)
Select the still image camera mode. t
step 5 in “Read This First”
COLOR (Color Mode)
You can change the brightness of the image, accompanied by effects.
B&W (B & W)
Sepia (SEPIA)
Natural (NATURAL)
Vivid (VIVID)
Normal
Sets the image to monochromatic color
Sets the image to sepia color
Sets the image to quiet color
Sets the image to bright and deep color
• You can select only [B&W] and [Sepia] when shooting movies.
• When [Multi Burst] is selected, the color mode is set to [Normal].
For details on the operation
1
(EV)
Manually adjusts the exposure.
Toward – Toward +
M +2.0EV
0EV m –2.0EV
Toward +: Brightens an image.
The exposure is automatically determined by the camera.
Toward –: Darkens an image.
• For details on the exposure
• The compensation value can be set in 1/3EV increments.
• If a subject is being shot in extremely bright or dark conditions, or the flash is used, the exposure adjustment may not be effective.
z Adjusting EV (Exposure Value) by displaying a histogram
60min
A
Dark
B
Bright
A histogram is a graph showing the brightness of an image. Press (Screen display switch) repeatedly to display the histogram inside the screen. The graph display indicates a bright image when skewed to the right side, and a dark image when skewed to the left side. Set the mode switch to and adjust EV while checking the exposure with the histogram.
A Number of pixels
B Brightness
• The histogram also appears in the following cases, but you cannot adjust the exposure.
– When (Camera) is set to [Auto]
– When playing back a single still image
– During Quick Review
Downloaded From camera-usermanual.com Sony Manuals
37
For details on the operation
1
9
(Focus)
You can change the focus method. Use the menu when it is difficult to get the proper focus in auto focus mode.
(unlimited distance)
7.0m
3.0m
1.0m
0.5m
Spot AF ( )
Focuses on the subject using a previously set distance to the subject. (Focus preset)
• When shooting a subject through a net or through window glass, it is difficult to get the proper focus in auto focus mode. In these cases, use of [Focus] is convenient.
Focuses on an extremely small subject or a narrow area automatically.
• Using together with the AF lock function lets you shoot in the desired image composition. Hold the camera steady not to misalign the subject and the AF range finder frame.
60min
Center AF
( )
Multi AF
(Multipoint AF)
(Still image )
(Movie )
AF range finder frame
AF range finder frame indicator
Focuses on a subject in the center of the finder frame automatically.
• Using this with the AF lock function lets you shoot in the desired image composition.
60min
AF range finder frame
AF range finder frame indicator
Focuses on a subject in all ranges of the finder frame automatically.
• This mode is useful when the subject is not in the center of the frame.
60min
AF range finder frame
AF range finder frame indicator
For details on the operation
1
• AF stands for Auto Focus.
• Distance setting information in [Focus] is approximate. If you point the lens up or down, the error increases.
• When you are shooting movies, [Multi AF] is recommended as the AF works even with a certain amount of vibration.
• When you use Digital Zoom or AF Illuminator, priority AF movement is given to subjects in or near the center of the frame. In this case the , or indicator flashes and the AF range finder frame is not displayed.
• Some options are not available depending on the Scene mode (page 29).
z
If the subject is out of focus
When shooting with the subject at the edge of the frame (or the screen), or when using [Center AF] or [Spot
AF], the camera may not focus on a subject at the edge of the frame. In such cases, do as follows.
1
Recompose the shot so that the subject is centered in the AF range finder, and press the shutter button halfway down to focus on the subject (AF lock).
60min
AE/AF lock indicator
AF range finder frame
As long as you do not press the shutter button fully down, you can retry the procedure as many times as you want.
2
When the AE/AF lock indicator stops flashing and remains on, return to the fully composed shot, and press the shutter button fully down.
60min
Downloaded From camera-usermanual.com Sony Manuals
39
For details on the operation
1
(Metering Mode)
Selects the metering mode that sets which part of the subject to measure to determine the exposure.
Spot (Spot metering)
( )
Measures only a part of the subject.
• This function is useful when the subject is backlit or when there is strong contrast between the subject and the background.
60min
Spot metering cross hairs
Positions on the subject
Center (Center-weighted metering) ( )
Multi (Multi-pattern metering)
Measures the center of the image, and determines the exposure based on the brightness of the subject there.
Divides into multiple regions and measures each region. The camera determines a well-balanced exposure.
• For details on the exposure
• When using spot metering or center-weighted metering, setting [9] (Focus) to [Center AF] is
recommended to focus on the metering position (page 38).
WB (White Bal)
Adjusts the color tones according to the lighting condition in a situation, for example, when the colors of an image look strange.
Flash (
WB
)
Incandescent (n)
Fluorescent (
Cloudy ( )
Daylight ( )
)
Adjusts for the flash conditions.
• You cannot select this item when shooting movies.
Adjusts for places where the lighting conditions change quickly such as at a party hall, or under bright lighting such as at photography studios.
Adjusts for fluorescent lighting.
Adjusts for a cloudy sky.
Auto
Adjusts for outdoors, shooting night scenes, neon signs, fireworks, or sunrise, or conditions before and after sundown.
Adjusts the White Balance automatically.
• For details on the white balance
• Under fluorescent lights that flicker, the white balance function may not work correctly even though you select [Fluorescent] ( ).
• Except in [Flash] (
WB
) modes, [WB] is set to [Auto] when the flash strobes.
• Some options are not available depending on the Scene mode (page 29).
For details on the operation
1
ISO
Selects a luminous sensitivity with units of ISO. The larger the number, the higher the sensitivity.
1000
800
400
200
100
80
Auto
Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small number to obtain high image quality.
• For details on the ISO sensitivity
• Note that the image tends to become noisier as the ISO sensitivity number increases.
• [ISO] is set to [Auto] in the Scene mode.
• When shooting under brighter conditions, the camera automatically increases its tone reproduction and helps prevent images to become whitish (excluding when [ISO] is set to [80] or [100]).
(P.Quality)
Selects the still image quality.
Fine (FINE)
Standard (STD)
Records with high quality (low compression).
Records with standard quality (high compression).
• For details on the image quality
Downloaded From camera-usermanual.com Sony Manuals
41
For details on the operation
1
Mode (REC Mode)
Selects whether the camera performs continuous shooting or not when you press the shutter button.
Multi Burst (
M
)
Exp Brktg (BRK)
Burst (
Normal
)
Records 16 frames in succession as a still image file when you press the shutter button.
• This is convenient for checking your form in sports, for example.
• You can select the Multi Burst shutter interval in [Interval] mode
Records a series of three images with the exposure values automatically shifted.
• When you cannot decide the correct exposure, shoot in the Exp
Brktg mode, shifting the exposure value. You can select the image with the best exposure afterward.
Records the maximum number of images in succession (refer to the following table) when you press and hold down the shutter button.
• When “Recording” disappears, you can shoot the next image.
Does not shoot continuously.
On the [Multi Burst]
• You can successively play back images shot in the Multi Burst mode using the following procedures:
– To pause/resume: Press z on the control button.
– To play back frame-by-frame: Press b/B in pause mode. Press z to resume playback in series.
• You cannot use the following functions in the Multi Burst mode:
– Smart zoom
– Flash
– Dividing a series of images shot in the Multi Burst mode
– Extracting or deleting a frame in a series of images shot in the Multi Burst mode
– Setting the frame interval to a mode other than [1/30] when (Camera) is set to [Auto]
• When playing back a series of images shot in the Multi Burst mode using a computer or a camera not equipped with the Multi Burst function, the image is displayed as a single image with 16 frames.
• The image size of images shot in the Multi Burst mode is 1M.
• You may not be able to shoot images in the Multi Burst mode depending on the Scene mode (page 29).
On the [Exp Brktg]
• The flash is set to (Flash forced off).
• The focus and white balance are adjusted for the first image, and these settings are also used for the other images.
• When the exposure is manually adjusted (page 37), the exposure is shifted based on the adjusted
brightness.
• The recording interval is approximately 1 second.
• If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket step value.
• You may not be able to shoot images in the Exposure Bracket mode depending on the Scene mode (page
For details on the operation
1
Size
7M
3:2
5M
3M
2M
VGA
16:9
On the [Burst]
• The flash is set to (Flash forced off).
• When recording with the self timer, a series of a maximum of five images is recorded.
• The recording interval is approximately 0.92 second.
• When the battery level is low, or when the internal memory or “Memory Stick Duo” is full, the Burst stops.
• You may not be able to shoot images in the Burst mode depending on the Scene mode (page 29).
The maximum number of continuous shots
(Units: images)
Quality
Fine Standard
5
5
6
9
15
85
15
8
8
11
17
27
100
27
BRK (Bracket Step)
Records a series of three images with the exposure values automatically shifted.
±1.0EV
±0.7EV
±0.3EV
Shifts the exposure value by plus or minus 1.0EV.
Shifts the exposure value by plus or minus 0.7EV.
Shifts the exposure value by plus or minus 0.3EV.
• BRK (Bracket Step) is not displayed in some Scene modes.
M
(Interval)
Selects the frame interval in the [Multi Burst] mode (page 42).
1/7.5 (1/7.5")
1/15 (1/15")
1/30 (1/30")
• Select [Multi Burst] in [Mode] first, then set the desired frame interval in [Interval]. When you select a function other than
[Multi Burst], this function is unavailable.
•
M
(Interval) is not displayed in some Scene modes.
Downloaded From camera-usermanual.com Sony Manuals
43
For details on the operation
1
(Flash Level)
Adjusts the amount of flash light.
+ ( +)
Normal
– ( –)
Toward +: Makes the flash level higher.
Toward –: Makes the flash level lower.
• To change flash mode t
step 5 in “Read This First”
• You may not be able to set the Flash Level depending on the Scene mode (page 29).
(Contrast)
Adjusts the contrast of the image.
+ ( )
Normal
– ( )
Toward +: Enhances the contrast.
Toward –: Reduces the contrast.
(Sharpness)
Adjusts the sharpness of the image.
+ ( )
Normal
– ( )
Toward +: Sharpens the image.
Toward –: Softens the image.
(Setup)
Viewing menu
For details on the operation
1
The default settings are marked with .
(Folder)
Selects the folder containing the image you want to play back when using the camera with
“Memory Stick Duo”.
OK
Cancel
See the following procedure.
Cancels the selection.
1
Select the desired folder with b/B on the control button.
Select Folder
102
Folder Name: 102MSDCF
No. Of Files: 9
Created:
2006 1 1 1::05:34
AM
OK
Cancel
BACK/NEXT
2/2
2
Select [OK] with v, then press z.
z On the folder
The camera stores images in a specified folder of a “Memory Stick Duo” (page 57). You can change the
folder or create a new one.
• To create a new folder
t [Create REC. Folder] (page 57)
• To change the folder for recording images
t [Change REC. Folder] (page 58)
• When multiple folders are created in the “Memory Stick Duo” and the first or last image in the folder is displayed, the following indicators appear.
: Moves to the previous folder.
: Moves to the next folder.
: Moves to either the previous or next folders.
Downloaded From camera-usermanual.com Sony Manuals
45
For details on the operation
1
-
(Protect)
Protects images against accidental erasure.
Protect (-)
Exit
See the following procedure.
Exits the Protection function.
To protect images in single-image mode
1 Display the image you want to protect.
2 Press MENU to display the menu.
3 Select [-] (Protect) with b/B on the control button, then press z.
The image is protected and the - (protect) indicator appears on the image.
60min
VGA
2/9
-
Protect
Exit
BACK/NEXT
4
To protect other images, select the desired image with b/B, then press z.
To protect images in index mode
1
Press (Index) to display the index screen.
2
Press MENU to display the menu.
3
Select [-] (Protect) with b/B on the control button, then press z.
4
Select [Select] with v/V, then press z.
5
Select the image you want to protect with v/V/b/B, then press z.
A green - indicator appears on the selected image.
(green)
•
SELECT MENU TO NEXT
6
Repeat step 5 to protect other images.
7
Press MENU.
8
Select [OK] with B, then press z.
The - indicator turns white. The selected images are protected.
• To protect all images in the folder, select [All In This Folder] in step 4, and press z. Select [On] with B, then press z.
For details on the operation
1
To cancel the protection
In single-image mode
Press z in step 3 or 4 of “To protect images in single-image mode.”
In index mode
1
2 Press z to turn the - indicator gray.
3 Repeat the operation above for all images to be unprotected.
4 Press MENU, select [OK] with B, and then press z.
To cancel protection of all images in the folder
Select [All In This Folder] in step 4 of “To protect images in index mode,” and press z.
Select [Off] with B, then press z.
• Note that formatting the internal memory or “Memory Stick Duo” erases all the data stored on the recording media, even if the images are protected, and these images cannot be restored.
• It may take some time to protect an image.
DPOF
Adds a
(Print)
(Print order) mark to images you want to print (page 85).
(Slide)
(Resize)
You can change the image size of a recorded image (Resize), and save it as a new file. The original image is retained even after resizing.
7M
5M
3M
2M
VGA
Cancel
The setting size is just a guideline.
t
step 4 in “Read This First”
Cancels resizing.
Downloaded From camera-usermanual.com Sony Manuals
47
For details on the operation
1
1
Display the image you want to resize.
2
Press MENU to display the menu.
3
Select [ ] (Resize) with b/B on the control button, then press z.
4
Select the desired size with v/V, then press z.
The resized image is recorded in the recording folder as the newest file.
• For details on [Image Size] t
step 4 in “Read This First”
• You cannot change the size of movies or Multi Burst images.
• When you change from a small size to a large size, the image quality deteriorates.
• You cannot resize to an image size of 3:2 or 16:9.
• When you resize a 3:2 or 16:9 image, the upper and lower black portions will be displayed on the image.
(Rotate)
Rotates a still image.
OK
Cancel
Rotates an image. See the following procedure.
Determines the rotation. See the following procedure.
Cancels rotation.
1
Display the image to be rotated.
2
Press MENU to display the menu.
3
Select [ ] (Rotate) with b/B on the control button, then press z.
4
Select [
] with v, then rotate the image with b/B.
5
Select [OK] with v/V, then press z.
• You cannot rotate protected images, movies, or Multi Burst images.
• You may not be able to rotate images shot with other cameras.
• When viewing images on a computer, the image rotation information may not be reflected depending on the software.
(Divide)
Cuts movies, or deletes unnecessary scenes of movies. This is a recommended function to use when the internal memory or “Memory Stick Duo” capacity is insufficient, or when you attach movies to your e-mail messages.
• Note that the original movie is deleted and that number is skipped. Also note that you cannot restore files once you cut them.
OK
Cancel
See the following procedure.
Cancels division.
For details on the operation
1
Example: Cutting a movie numbered 101_0002
This section describes an example of dividing a movie numbered 101_0002 and deleting it in the following file configuration.
101_0001 101_0003
1 3
2
101_0002
1
Cutting scene A.
1 A
2
B 3
101_0002
Divide
101_0002 is divided into 101_0004 and 101_0005.
2
Cutting scene B.
101_0004
1 3 A 2 B
101_0005
Divide
101_0005 is divided into 101_0006 and 101_0007.
3
Deleting scenes A and B if they are unnecessary.
101_0004 101_0007
1 3 A 2 B
Delete
101_0006
Delete
4
Only the desired scenes remain.
1 3 2
101_0006
Procedure
1
Display the movie to be divided.
2
Press MENU to display the menu.
3
Select [ ] (Divide) with b/B on the control button, then press z.
4
Select [OK] with v, then press z.
The movie starts.
Downloaded From camera-usermanual.com Sony Manuals
49
For details on the operation
1
5
Press z at the desired cutting point.
60min
Divide
Dividing
Point
O K
Cancel
Exit
STD
6 4 0
10/10
00:00:02
• When you want to adjust the cutting point, select [c/C] (frame rewind/forward) and adjust the cutting point using b/B.
• If you want to change the cutting point, select [Cancel]. The movie starts again.
6
Select [OK] with v/V, and press z.
7
Select [OK] with v, then press z.
The movie is cut.
• The cut movies are assigned new numbers, and then recorded as the newest files in the selected recording folder.
• You cannot cut the following kinds of images.
– Still images
– Movies not long enough to cut (shorter than about two seconds)
(Setup)
Trimming
Records an enlarged image ( t
step 6 in “Read This First”) as a new file
.
Trimming
See the following procedure.
Return
Cancels trimming.
1
Press MENU during playback zoom to display the menu.
2
Select [Trimming] with B on the control button, then press z.
3
Select the image size with v/V, then press z.
The image is recorded, and the original image is displayed again.
• The trimmed image is recorded as the newest file in the selected recording folder, and the original image is retained.
• The quality of trimmed images may deteriorate.
• You cannot trim to an image size of 3:2 or 16:9 aspect ratio.
• You cannot trim images displayed with Quick Review.
Using the Setup screen
Using Setup items
You can change the default settings using the Setup screen.
v/V/b/B button
Mode switch z button
MENU button
Control button
1
Turn on the power.
2
Press MENU to display the menu.
3
After pressing B on the control button, go to the
(Setup) setting, then
press B again.
4
Press v/V/b/B on the control button to select the item you want to set.
The frame of the selected item turns yellow.
5
Press z to enter the setting.
To turn off the (Setup) screen, press MENU.
To return to the menu from the (Setup) screen, press b on the control button repeatedly.
• Press the shutter button halfway down to close the (Setup) screen and return to the shooting mode.
When the menu is not displayed
Press MENU longer to display the (Setup) screen.
To cancel the (Setup) setting
Select [Cancel] if it appears, then press z on the control button. If it does not appear, select the previous setting again.
• This setting is maintained even when the power is turned off.
Downloaded From camera-usermanual.com Sony Manuals
51
1
Camera 1
For details on the operation
1
The default settings are marked with .
AF Mode
Selects the auto focus operation mode.
Single (S AF)
Monitor (M AF)
Automatically adjusts the focus when the shutter button is pressed and held halfway down. This mode is useful for shooting stationary subjects.
Automatically adjusts the focus before the shutter button is pressed and held halfway down. This mode shortens the time needed for focusing.
• Battery consumption is faster than in [Single] mode.
Digital Zoom
Selects the digital zoom mode. The camera enlarges the image using optical zoom (up to 3×).
When the zoom scale exceeds 3×, the camera uses either smart or precision digital zoom.
Smart
(Smart zoom)
( )
Precision
(Precision digital zoom)
(
Off
)
Enlarges the image digitally with almost no distortion. This is not available when the image size is set to [7M] or [3:2].
• The maximum zoom scale of Smart zoom is shown in the following table.
Enlarges all image sizes up to a maximum of 6×, but the image quality deteriorates.
Does not use the digital zoom.
Image size and maximum zoom scale using Smart zoom
Size
5M
3M
2M
VGA
16:9
Maximum zoom scale
Approx. 3.6×
Approx. 4.5×
Approx. 5.6×
Approx. 14×
Approx. 4.8×
For details on the operation
1
• When you press the zoom button, the zoom scaling indicator appears as follows.
The W side of this line is the optical zoom area, and the T side is the digital zoom area
Zoom scaling indicator
• The maximum zoom scale of smart zoom/precision zoom includes the scale of the optical zoom.
• The AF range finder frame does not appear when using the digital zoom. The , or indicator flashes, and AF operates with priority on subjects located near the center of the frame.
• When using the smart zoom, the image on the screen may look rough. However, this phenomenon has no effect on the recorded image.
Function Guide
When you operate the camera, the description of functions is displayed.
On
Off
Displays the function guide.
Does not display the function guide.
Red Eye Reduction
Reduces the red-eye phenomenon when using the flash. Select this before shooting.
On ( )
Reduces the red-eye phenomenon.
• The flash pre-strobes twice or more before shooting.
Does not use Red Eye Reduction.
Off
• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of vibration. Also, do not let the subject move.
• Red-eye reduction may not produce the desired effects depending on individual differences, the distance to the subject, if the subject does not see the pre-strobe, or other conditions.
Downloaded From camera-usermanual.com Sony Manuals
53
For details on the operation
1
AF Illuminator
The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings.
The AF illuminator emits red light allowing the camera to focus easily when the shutter button is pressed halfway, until the focus is locked. The
ON
indicator appears at this time.
Auto
Off
Uses the AF illuminator.
Does not use AF illuminator.
• If the AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will not be achieved. (A distance of up to approximately 2.7 m (106 3/8 inches) (zoom: W) / 2.5 m
(98 1/2 inches) (zoom: T) is recommended.)
• Focus is achieved as long as the AF illuminator light reaches the subject, even if the light is slightly off the center of the subject.
• When Focus preset is set (page 38), AF Illuminator does not function.
• The AF range finder frame does not appear. The , or indicator flashes, and AF operates with priority on subjects located near the center of the frame.
• The AF illuminator does not operate when (Twilight mode), (Landscape mode), (High-speed shutter mode) or (Fireworks mode) is selected in the Scene mode.
• The AF illuminator emits very bright light. Although there are no problems with safety, do not look directly into the AF illuminator emitter at close range.
Auto Review
Displays the recorded image on the screen for approximately two seconds immediately after shooting a still image.
On
Off
Use the Auto Review.
Does not use Auto Review.
• If you press the shutter button halfway down during this period, the recorded image display disappears and you can immediately shoot the next image.
2
Camera 2
For details on the operation
1
The default settings are marked with .
STEADY SHOT
Selects the anti-blur mode.
Shooting
Continuous
Activates the anti-blur function when pressing the shutter button halfway down.
Always activates the anti-blur function. You can stabilize images even when zooming up a far subject.
• Battery consumption is faster than in [Shooting] mode.
• When shooting movies, [Continuous] is activated even if you select [Shooting].
• You can turn off the anti-blur function using the set to [Auto]. ( t step 5 in “Read This First”)
(STEADY SHOT) button when (Camera) is not
• The anti-blur function may not work properly in the following cases.
– When camera shake is too strong
– When the shutter speed is slow, for example, shooting night scenes
Downloaded From camera-usermanual.com Sony Manuals
55
Internal Memory Tool
For details on the operation
1
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
The default settings are marked with .
Format
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
OK
Cancel
See the following procedure.
Cancels the formatting.
1 Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.
2
Select [OK] with v, then press z.
The format is complete.
Memory Stick Tool
For details on the operation
1
This item appears only when a “Memory Stick Duo” is inserted in the camera.
The default settings are marked with .
Format
Formats the “Memory Stick Duo”. A commercially available “Memory Stick Duo” is already formatted, and can be used immediately.
• Note that formatting irrevocably erases all data on a “Memory Stick Duo”, including even protected images.
OK
Cancel
See the following procedure.
Cancels the formatting.
1
Select [OK] with v on the control button, then press z.
The message “All data in Memory Stick will be erased Ready?” appears.
2
Select [OK] with v, then press z.
The format is complete.
Create REC. Folder
Creates a folder in a “Memory Stick Duo” for recording images.
OK
Cancel
See the following procedure.
Cancels folder creation.
1
Select [OK] with v on the control button, then press z.
The folder creation screen appears.
60min
Create REC. Folder
Creating REC. folder
102MSDCF
Ready?
OK
Cancel
2
Select [OK] with v, then press z.
A new folder is created with a number incremented one higher than the largest number, and the folder becomes the current recording folder.
• For details on the folder, see page 45.
• When not creating a new folder, the “101MSDCF” folder is selected as the recording folder.
• You can create folders designated up to “999MSDCF.”
• Images are recorded in the newly created folder until a different folder is created or selected.
• You cannot delete a folder with the camera. To delete a folder, use your computer, etc.
• Up to 4,000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created.
• For details, see “Image file storage destinations and file names” (page 71).
Downloaded From camera-usermanual.com Sony Manuals
57
For details on the operation
1
Change REC. Folder
Changes the folder currently used for recording images.
OK
Cancel
See the following procedure.
Cancels changing the recording folder.
1 Select [OK] with v on the control button, then press z.
The folder selection screen appears.
Select REC. Folder
102
Folder Name: 102MSDCF
No. Of Files:
Created:
2006
0
1 1 1::05:34
AM
OK
Cancel
BACK/NEXT
2/2
2
Select the desired folder with b/B, and [OK] with v, then press z.
• You cannot select the “100MSDCF” folder as a recording folder.
• You cannot move recorded images to a different folder.
Copy
Copies all images in the internal memory to a “Memory Stick Duo”.
OK
Cancel
See the following procedure.
Cancels the copying.
1 Insert a “Memory Stick Duo” having 64 MB or larger capacity.
2 Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.
3
Select [OK] with v, then press z.
Copying starts.
60min
Copying
102_COPY
• Use a fully charged battery pack or the AC Adaptor (not supplied). If you attempt to copy image files using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in
(Internal Memory Tool) (page 56).
• You cannot select a folder copied on a “Memory Stick Duo”.
• Even if you copy data, a (Print order) mark is not copied.
1
Setup 1
For details on the operation
1
The default settings are marked with .
Download Music
Downloads the music to be played for the Slide show.
Format Music
If you cannot play back a Music file for the Slide Show, the Music file might be corrupted. If this happens, perform [Format Music].
When [Format Music] is performed, all the Music files are erased. Use the supplied software
“Music Transfer” to activate [Download Music].
The message “All data will be erased Ready?” appears.
OK
Cancel
Formats the Music files. All data other than Music files remain as it is.
Cancels the formatting.
LCD Backlight
Selects the brightness of the LCD backlight when using the camera with battery pack.
Bright
Normal
Brightens.
• You can change the setting by pressing (Screen display switch) button longer.
• Selecting [Bright] uses up the battery pack charge faster.
Beep
Selects the sound produced when you operate the camera.
Shutter
On
Off
Turns on the shutter sound when you press the shutter button.
Turns on the beep/shutter sound when you press the control button/ press the shutter button.
Turns off the beep/shutter sound.
Language
Selects the language to be used to display the menu items, warnings, and messages.
Downloaded From camera-usermanual.com Sony Manuals
59
For details on the operation
1
Initialize
Initializes the setting to the default setting.
OK
Cancel
See the following procedure.
Cancels the resetting.
1 Select [OK] with v on the control button, then press z.
The message “Initialize all settings Ready?” appears.
2
Select [OK] with v, then press z.
The settings are reset to the default setting.
• Make sure that the power is not disconnected during resetting.
2
Setup 2
For details on the operation
1
The default settings are marked with .
File Number
Selects the method used to assign file numbers to images.
Series
Reset
Assigns numbers to files in sequence even if the recording folder or the “Memory Stick Duo” is changed. (When the replaced “Memory Stick Duo” contains a file with a number higher than the last assigned number, a number one higher than the largest number is assigned.)
Starts from 0001 each time the folder is changed. (When the recording folder contains a file, a number one higher than the largest number is assigned.)
USB Connect
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge compliant printer using the cable for multi-use terminal.
PictBridge
PTP
Mass Storage
Connects the camera to a PictBridge compliant printer
When [PTP] (Picture Transfer Protocol) is set and the camera is connected to a computer, the images in the recording folder on the camera are copied to the computer. (Compatible with
Windows XP and Mac OS X.)
Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 67).
Auto
The camera recognizes automatically and sets up communication with a computer or PictBridge compliant
• If the camera and a PictBridge compliant printer cannot be connected when set to [Auto], change the setting to
[PictBridge].
• If the camera and a computer or other USB device cannot be connected when set to [Auto], change the setting to [Mass
Storage].
Downloaded From camera-usermanual.com Sony Manuals
61
For details on the operation
1
Video Out
Sets the video signal output according to the TV color system of the connected video equipment. Different countries and regions use different TV color systems. If you want to
view images on a TV screen, check page 88 for the TV color system of the country or region
where the camera is used.
NTSC
PAL
Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
Sets the video output signal to PAL mode (e.g., for Europe).
Clock Set
Sets the date and time.
OK
Cancel
Select [OK] with v on the control button, and press z. Then, perform the procedure explained in “Set the clock” ( t
step 2
in “Read This First”).
Cancels setting the clock.
Using your computer
Enjoying your Windows computer
For details on using a Macintosh computer,
refer to “Using your Macintosh computer”
This section describes the English version of screen contents.
Install the software (supplied) first (page 65)
Copying images to your computer (page 66)
Viewing images on your computer
Enjoying images using the “Cyber-shot Viewer” and “Music Transfer”
•
•
•
•
Viewing images saved on your computer
Viewing photos organized by date
Editing images
Adding/changing Music using “Music Transfer”
Printing images
Downloaded From camera-usermanual.com Sony Manuals
63
Recommended computer environment
The following environment is recommended for a computer connected to the camera.
Recommended environment for copying images
OS (pre-installed): Microsoft Windows
2000 Professional, Windows Millennium
Edition, Windows XP Home Edition or
Windows XP Professional
• Operation is not assured in an environment based on an upgrade of the operating systems described above or in a multi-boot environment.
USB jack: Provided as standard
Recommended environment for using
“Cyber-shot Viewer” and “Music
Transfer”
OS (pre-installed): Microsoft Windows
2000 Professional, Windows Millennium
Edition, Windows XP Home Edition or
Windows XP Professional
Sound card: 16-bit stereo sound card with speakers
CPU/Memory: Pentium III 500 MHz or faster, 128 MB of RAM or more
(Recommended: Pentium III 800 MHz or faster and 256 MB of RAM or more)
Software: DirectX 9.0c or later
Hard Disk: Disk space required for installation—200 MB or more
Display: Screen resolution: 800 × 600 dots or more Colors: High Color (16-bit color,
65,000 colors) or more
• The software is compatible with DirectX technology. Installation of “DirectX” may be required.
Notes on connecting your camera to a computer
• Operations are not guaranteed for all the recommended computer environments mentioned above.
• If you connect two or more USB devices to a single computer at the same time, some devices, including your camera, may not operate, depending on the types of USB devices you are using.
• Operations are not guaranteed when using a
USB hub.
• Connecting your camera using a USB interface that is compatible with Hi-Speed USB (USB 2.0 compliant) allows advanced transfer (high speed transfer) as this camera is compatible with Hi-
Speed USB (USB 2.0 compliant).
• There are three modes for a USB connection when connecting a computer, [Auto] (default setting), [Mass Storage] and [PTP] modes. This section describes the [Auto] and [Mass Storage]
as examples. For details on [PTP], see page 61.
• When your computer resumes from a suspend or sleep mode, communication between your camera and your computer may not recover at the same time.
Technical Support
Additional information on this product and answers to frequently asked questions can be found at the Sony
Customer Support Website.
http://www.sony.net/
Installing the software (supplied)
You can install the software (supplied) using the following procedure.
• When using Windows 2000/Me, do not connect the camera to the computer before installation.
• In Windows 2000/XP, log on as Administrator.
• When the supplied software is installed, the
USB driver is installed automatically.
1
Turn on your computer, and insert the CD-ROM (supplied) into the
CD-ROM drive.
The installation menu screen appears.
4
Follow the instructions on the screen to complete the installation.
When the restarting confirmation message appears, restart the computer following the instructions on the screen.
• DirectX may be installed depending on system environment of your computer.
5
Remove the CD-ROM after the installation is complete.
• If it does not appear, double-click (My
Computer) t (CYBERSHOTSOFT).
2
Click [Install].
The “Choose Setup Language” screen appears.
3
Select the desired language, then click [Next].
The “License Agreement” screen appears.
Read the agreement carefully. If you accept the terms of the agreement, click the radio button next to [I accept the terms of the license agreement] and then click [Next].
Downloaded From camera-usermanual.com Sony Manuals
65
Copying images to your computer
This section describes the process using a
Windows computer as an example.
You can copy images from the camera to your computer as follows.
For a computer with a Memory Stick slot
Remove the “Memory Stick Duo” from the camera and insert it in the Memory Stick
Duo Adaptor. Insert the Memory Stick Duo
Adaptor in the computer and copy the images.
If the “Memory Stick PRO Duo” is not
For a computer without a Memory
Stick slot
Follow Stages 1 through 4 on pages 66 to
• When you are using Windows 2000/Me, install the software (supplied) before proceeding. With
Windows XP, installation is unnecessary.
• The screen displays shown in this section are the examples for copying images from “Memory
Stick Duo”.
Stage 1: Preparing the camera and the computer
1
Insert a “Memory Stick Duo” with recorded images into the camera.
• When copying images in the internal memory, this step is unnecessary.
2
Insert the sufficiently charged battery pack in the camera, or connect the camera to a wall outlet (wall socket) with the AC
Adaptor (not supplied).
• When you copy images to your computer using a battery pack with little remaining charge, copying may fail or image data may become corrupted if the battery pack shuts down too soon.
3
Set the mode switch to , then turn on the camera and the computer.
2
Set the switch on the cable for multi-use terminal to “CAMERA”.
CAMERA TV
DISP SEL
Stage 2: Connecting the camera and your computer
1
Connect the camera to your computer.
• With Windows XP, the AutoPlay wizard appears on the desktop.
“USB Mode Mass Storage” appears on the screen of the camera.
USB Mode
Mass Storage
Access indicators*
Memory Stick
Switch on
MENU
When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera.
Wait for a while.
* During communication, the access indicators turn red. Do not operate the computer until the indicators turn white.
• If “USB Mode Mass Storage” does not appear,
set [USB Connect] to [Mass Storage] (page 61).
Stage 3-A: Copying images to a computer
2
To the multi connector
1
To a USB jack
• For Windows 2000/Me, follow the procedure
explained in “Stage 3-B: Copying images to a
• For Windows XP, when the wizard screen does not appear automatically, follow the procedure
explained in “Stage 3-B: Copying images to a
Cable for multiuse terminal
This section describes an example of copying images to a “My Documents” folder.
Downloaded From camera-usermanual.com Sony Manuals
67
1
After making a USB connection in
Stage 2, click [Copy pictures to a folder on my computer using
Microsoft Scanner and Camera
Wizard]
t
[OK] as the wizard screen appears automatically on the desktop.
4
Select a name and destination for the images, then click [Next].
1
1
2
The “Scanner and Camera Wizard” screen appears.
2
Click [Next].
The images saved on the “Memory
Stick Duo” of the camera appear.
• If no “Memory Stick Duo” is inserted, images in the internal memory appear.
3
Click the check box of unwanted images to remove the checkmark so they are not copied, then click
[Next].
1
2
Image copying starts. When the copying is completed, the “Other Options” screen appears.
• This section describes an example of copying images to the “My Documents” folder.
5
Click the radio button next to
[Nothing. I'm finished working with these pictures] to select it, then click [Next].
1
2
The “Completing the Scanner and
Camera Wizard” screen appears.
2
The “Picture Name and Destination” screen appears.
6
Click [Finish].
The wizard screen closes.
• To continue copying other images, disconnect the cable for multi-use terminal
(page 70). Then follow the procedure
explained in “Stage 2: Connecting the camera and your computer” on page 67.
2
Double-click the folder where the image files you want to copy are stored.
Then, right-click an image file to display the menu and click
[Copy].
Stage 3-B: Copying images to a
Computer
• For Windows XP, follow the procedure
explained in “Stage 3-A: Copying images to a computer” on page 67.
This section describes an example of copying images to the “My Documents” folder.
1
Double-click [My Computer]
t
[Removable Disk]
t
[DCIM].
1
2
• On the storage destination of the image
3
Double-click the [My Documents] folder. Then, right-click on the
“My Documents” window to display the menu and click
[Paste].
1
2
• If the “Removable Disk” icon is not
The image files are copied to the “My
Documents” folder.
Downloaded From camera-usermanual.com Sony Manuals
69
• When an image with the same file name exists in the copy destination folder, the overwrite confirmation message appears.
When you overwrite an existing image with a new one, the original file data is deleted.
To copy an image file to the computer without overwriting, change the file name to a different name and then copy the image file. However, note that if you change the
file name (page 72), you may not be able to
play back that image with your camera.
2
Double-click the desired image file.
Stage 4: Viewing images on your computer
This section describes the procedure for viewing copied images in the “My
Documents” folder.
1
Click [Start]
t
[My Documents].
2
The image is displayed.
To delete the USB connection
Perform the procedures listed below beforehand when:
• Disconnecting the cable for multi-use terminal
• Removing a “Memory Stick Duo”
• Inserting a “Memory Stick Duo” into the camera after copying images from the internal memory
• Turning off the camera x
For Windows 2000/Me/XP
1 Double-click on the tasktray.
1
The contents of the “My Documents” folder are displayed.
• If you are not using Windows XP, double-click [My Documents] on the desktop.
Double-click here
2 Click (Sony DSC) t
[Stop].
3 Confirm the device on the confirmation window, then click [OK].
4
Click [OK].
The device is disconnected.
• Step 4 is unnecessary for Windows XP.
Image file storage destinations and file names
The image files recorded with your camera are grouped as folders on the “Memory
Stick Duo”.
Example: viewing folders on Windows XP
• Image files are named as follows. ssss stands for any number within the range from
0001 to 9999. The numerical portions of the name of a movie file recorded in movie mode and its corresponding index image file are the same.
– Still image files: DSC0ssss.JPG
– Movie files: MOV0ssss.MPG
– Index image files that are recorded when you record movies: MOV0ssss.THM
• For more information about folders, see pages
A
B
A Folder containing image data recorded using a camera not equipped with the folder creating function
B Folder containing image data recorded using this camera
When no new folders are created, there are folders as follows:
– “Memory Stick Duo”; “101MSDCF” only
– Internal memory; “101_SONY” only
• You cannot record any images to the
“100MSDCF” folder. The images in these folders are available only for viewing.
• You cannot record/playback any images to the
“MISC” folder.
Downloaded From camera-usermanual.com Sony Manuals
71
Viewing image files stored on a computer with your camera (using a “Memory Stick Duo”)
This section describes the process using a
Windows computer as an example.
When an image file copied to a computer no longer remains on a “Memory Stick
Duo”, you can view that image again on the camera by copying the image file on the computer to a “Memory Stick Duo”.
• Step 1 is not necessary if the file name set with your camera has not been changed.
• You may be unable to play back some images depending on the image size.
• When an image file has been processed by a computer or when the image file was recorded using a model other than that of your camera, playback on your camera is not guaranteed.
• When there is no folder, create a folder with
your camera (page 57) first, and then copy the
image file.
2
Copy the image file to the
“Memory Stick Duo” folder in the following order.
1
Right-click the image file, then click
[Copy].
2 Double-click [Removable Disk] or
[Sony MemoryStick] in [My
Computer].
3
Right-click the [sssMSDCF] folder in the [DCIM] folder, then click [Paste].
• sss stands for any number within the range from 100 to 999.
1
Right-click the image file, then click [Rename]. Change the file
name to “DSC0ssss.”
Enter a number from 0001 to 9999 for ssss.
1
2
• If the overwrite confirmation message appears, enter a different number.
• An extension may be displayed depending on the computer settings. The extension for still images is JPG, and the extension for movies is MPG. Do not change the extension.
Using the “Cyber-shot Viewer” (supplied)
You can use still images and movies from the camera more than ever by taking advantage of the software.
This section summarizes the “Cyber-shot
Viewer” and gives the basic instructions.
“Cyber-shot Viewer” overview
With the “Cyber-shot Viewer” you can:
• Import images shot with the camera and display them on the computer.
• Organize images on the computer on a calendar by shooting date to view them.
• Retouch, print, and send still images as e-mail attachments, change the shooting date, and more.
• For details on the
“Cyber-shot Viewer”
, refer to the Help.
To access the Help, click [Start] t
[Programs] (in Windows XP, [All
Programs]) t [Sony Picture Utility] t
[Help] t [Cyber-shot Viewer].
Starting and exiting the “Cybershot Viewer”
Starting the “Cyber-shot Viewer”
Double-click the (Cyber-shot Viewer) icon on the desktop.
Or, from the Start menu: Click [Start] t
[Programs] (in Windows XP, [All
Programs]) t [Sony Picture Utility] t
[Cyber-shot Viewer].
Exiting the “Cyber-shot Viewer”
Click button in the top right corner of the screen.
Basic instructions
Follow these steps to import and view images from the camera.
Importing images
1
Make sure “Media Check Tool”* is running.
* “Media Check Tool” is a program that automatically detects and imports images when a “Memory Stick” is inserted or when the camera is connected.
Look for a (
Media Check Tool)
icon in the taskbar.
• If there is no icon: Click [Start] t
[Programs] (in Windows XP, [All
Programs]) t [Sony Picture Utility] t
[Cyber-shot Viewer] t [Tools] t [Media
Check Tool].
2
Connect the camera to your computer with the cable for multiuse terminal.
After the camera is automatically detected, the [Import Images] screen is displayed.
• If you use the Memory Stick slot, refer to
• In Windows XP, if the Auto Play Wizard appears, close it.
Downloaded From camera-usermanual.com Sony Manuals
73
3
Import the images.
To start importing images, click the
[Import] button.
By default, images are imported into a folder created in “My Pictures” that is named with the date of importing.
• For instructions on changing the “Folder to
be imported”, refer to page 76.
Viewing images
1
Checking imported images
When importing is complete, the
“Cyber-shot Viewer” starts. Thumbnails of the imported images are displayed.
2
Viewing images in “Viewed folders” arranged by shooting date on a calendar
1
Click the [Calendar] tab.
Years when images were shot are listed.
2 Click the year.
Images shot that year are displayed, arranged on the calendar by shooting date.
3
To display images by month, click the desired month.
Thumbnails of images shot that month are displayed.
4
To display images by time, click the desired date.
Thumbnails of images shot that day are displayed, arranged by hour.
Year display screen
1
2
3
Month display screen
4
• The “My Pictures” folder is set as the default folder in “Viewed folders”.
• You can double-click a thumbnail to display the image by itself.
Hour display screen
4
Displaying images in full-screen mode
To display a slide show of current images in full-screen mode, click the button.
• To list images from a particular year or month, click that period on the left of the screen.
3
Displaying individual images
On the hour display screen, double-click a thumbnail to display the image by itself in a separate window.
• To play or pause the slide show, click the
button on the lower left of the screen.
• To stop the slide show, click the button on the lower left of the screen.
• You can edit displayed images by clicking the toolbar button.
Downloaded From camera-usermanual.com Sony Manuals
75
Other functions
Preparing images stored on the computer for viewing
To view images, register the folder that contains the images as one of the “Viewed folders”.
From the [File] menu, choose [Register
Viewed Folders...] to display the settings screen for “Viewed folders” registration.
Changing the “Folder to be imported”
To change the “Folder to be imported”, access the “Import Settings” screen.
To display the “Import Settings” screen, choose [Image Import Settings...] from the
[File] menu.
1
1
2
Click the [Add...] button, and then specify the folder with images for importing to register the folder as a “Viewed folder.”
• Images in any subfolders of “Viewed folders” are also registered.
2
Choose the “Folder to be imported”.
• You can specify the “Folder to be imported” from folders registered as “Viewed folders.”
Updating image registration information
To update image information, choose
[Update Database] from the [Tools] menu.
• Updating the database may take a while.
• If you rename image files or folders in “Viewed folders”, they cannot be displayed with this software. In this case, update the database.
Uninstalling “Cyber-shot
Viewer”
1
Click [Start] t [Settings] t [Control
Panel]. Double-click [Add/Remove
Programs]. (For Windows XP, click [start] t [Control Panel], then double-click
[Add or Remove Programs].)
2
Select [Sony Picture Utility] and click
[Change/Remove] (for Windows XP,
[Remove]) to uninstall.
Using the “Music Transfer” (supplied)
You can change the Music files that are preset at the factory with desired Music files using “Music Transfer” in the CD-
ROM (supplied). Also, you can delete or add these files whenever you want.
Adding/Changing Music using
“Music Transfer”
The music formats you can transfer with
“Music Transfer” are listed below:
• MP3 files stored on the hard drive of your computer
• Music on CDs
• Preset-music saved on this camera
1
Press MENU to display the menu.
2
Select
(Setup) with B on the
control button.
3
Select
(Setup1) with v/V on
1 the control button, then select
[Download Music] with v/B.
4
Select [OK] with B/v, press z.
The message “Connect to PC” appears.
5
Make a USB connection between the camera and your computer.
6
Start “Music Transfer.”
7
Follow the instructions on the screen to add/change Music files.
•
To restore the music preset at the factory to the camera:
1
Perform [Format Music] (page 59).
2
Execute [Restore defaults] on “Music
Transfer.”
All Music files return to the preset-music, and
[Music] in the [Slide] menu is set to [Off].
3
Select a suitable Music file for the slide
You can reset the Music files to the preset ones using [Initialize], however, other settings will also be reset.
• For details on using “Music Transfer,” see the on-line help in “Music Transfer.”
Downloaded From camera-usermanual.com Sony Manuals
77
Using your Macintosh computer
You can copy images to your Macintosh computer.
• “Cyber-shot Viewer” is not compatible with
Macintosh computers.
Recommended computer environment
The following environment is recommended for a computer connected to the camera.
Recommended environment for copying images
OS (pre-installed): Mac OS 9.1, 9.2, or Mac
OS X (v10.0 or later)
USB jack: Provided as standard
Recommended environment for using
“Music Transfer”
OS (pre-installed): Mac OS X (v10.3 or later)
CPU: iMac, eMac, iBook, PowerBook, Power
Mac G3/G4/G5 series, Mac mini
Memory: 64 MB or more (128 MB or more is recommended)
Hard Disk: Disk space required for installation—approximately 250 MB
Notes on connecting your camera to a computer
• Operations are not guaranteed for all the recommended computer environments mentioned above.
• If you connect two or more USB devices to a single computer at the same time, some devices, including your camera, may not operate depending on the types of USB devices you are using.
• Operations are not guaranteed when using a
USB hub.
• Connecting your camera using a USB interface that is compatible with Hi-Speed USB (USB 2.0 compliant) allows advanced transfer (high speed transfer) as this camera is compatible with Hi-
Speed USB (USB 2.0 compliant).
• There are three modes for a USB connection when connecting a computer, [Auto] (default setting), [Mass Storage] and [PTP] modes. This section describes the [Auto] and [Mass Storage]
as examples. For details on [PTP], see page 61.
• When your computer resumes from the suspend or sleep mode, communication between your camera and your computer may not recover at the same time.
Copying and viewing images on a computer
1
Prepare the camera and a
Macintosh computer.
Perform the same procedure as
described in “Stage 1: Preparing the camera and the computer” on page 66.
2
Connect the cable for multi-use terminal.
Perform the same procedure as
described in “Stage 2: Connecting the camera and your computer” on page 67.
3
Copy image files to the Macintosh computer.
1
Double-click the newly recognized icon t
[DCIM] t
the folder where the images you want to copy are stored.
2 Drag and drop the image files to the hard disk icon.
The image files are copied to the hard disk.
• For details on the storage location of the
images and file names, see page 71.
4
View images on the computer.
Double-click the hard disk icon t
the desired image file in the folder containing the copied files to open that image file.
1
Turn on your Macintosh computer, and insert the CD-ROM (supplied) into the
CD-ROM drive.
2
Double-click
3
Double-click the [MusicTransfer.pkg] file in [MAC] folder.
The installation of the software starts.
To add/change Music files
See “Adding/Changing Music using “Music
To delete the USB connection
Perform the procedures listed below beforehand when:
• Disconnecting the cable for multi-use terminal
• Removing a “Memory Stick Duo”
• Inserting a “Memory Stick Duo” into the camera after copying images from the internal memory
• Turning off the camera
Drag and drop the drive icon or the icon of the “Memory Stick Duo” to the
“Trash” icon.
The camera is disconnected from the computer.
• If you are using Mac OS X v10.0, perform the procedure above after you have turned your computer off.
Technical Support
Additional information on this product and answers to frequently asked questions can be found at the Sony
Customer Support Website.
http://www.sony.net/
Adding/Changing Music using
“Music Transfer”
You can change the Music files that are preset at the factory with desired Music files. Also, you can delete or add these files whenever you want.
The music formats you can transfer with
“Music Transfer” are listed below:
• MP3 files stored on the hard drive of your computer
• Music on CDs
• Preset-music saved on this camera
To install “Music Transfer”
• Shut down all other application software before you install “Music Transfer.”
• For installation, you need to log on as
Administrator.
Downloaded From camera-usermanual.com Sony Manuals
79
Printing still images
How to print still images
When you print images shot in [16:9] mode, both edges may be cut off, so be sure to check before
Printing directly using a PictBridge compliant printer (page 81)
You can print images by connecting the camera directly to a
PictBridge compliant printer.
Printing directly using a “Memory Stick” compliant printer
You can print images with a “Memory Stick” compliant printer.
For details, see the operating instructions supplied with the printer.
Printing using a computer
You can copy images to a computer using the supplied “Cyber-shot
Viewer” software and print the images.
You can take a “Memory Stick Duo” containing images shot with your camera to a photo printing service shop. You can make a
(Print order) mark on images which you want to print out in advance.
Printing images directly using a PictBridge compliant printer
Even if you do not have a computer, you can print images shot using your camera by connecting the camera directly to a
PictBridge compliant printer.
• “PictBridge” is based on the CIPA standard.
(CIPA: Camera & Imaging Products
Association)
Stage 1: Preparing the camera
Prepare the camera to connect it to the printer with the cable for multi-use terminal. When connecting the camera to a printer that is recognized when [USB
Connect] is set to [Auto], Stage 1 is unnecessary.
Index button
In single-image mode
You can print a single image on a printing sheet.
MENU button
Control Button
In index mode
You can print several images at a reduced size on a printing sheet. You can print a set of either the same images (1) or different images (2).
1 2
• It is recommended to use a fully charged battery pack or an AC Adaptor (not supplied) to prevent the power from turning off partway through printing.
1
Press MENU to display the menu.
2
Press B on the control button to
• An index print function may not be provided depending on the printer.
• The quantity of images that can be printed as an index image differ depending on the printer.
• You cannot print movies.
• If the indicator flashes on the screen of the camera for about five seconds (error notification), check the connected printer.
3
Select [
] (Setup2) with V, then
2
select [USB Connect] with v/V/B.
4
Select [PictBridge] with B/v, then
press z.
The USB mode is set.
Downloaded From camera-usermanual.com Sony Manuals
81
Stage 2: Connecting the camera to the printer
1
Connect the camera to the printer.
3
Turn on your camera and the printer.
After the connection is made,
60min
All In
This Folder
DPOF image
Select
This image
Cancel
2M
The camera is set to playback mode, then an image and the print menu appear on the screen.
2
To the multi connector
1
To the
USB jack
Cable for multi-use terminal
2
Set the switch on the cable for multi-use terminal to “CAMERA”.
CAMERA TV
DISP SEL
Stage 3: Printing
Regardless of what the mode switch is set to, the print menu appears when you complete Stage 2.
1
Select the desired printing
method with v/V on the control
button, then press z.
[All In This Folder]
Prints all the images in the folder.
[DPOF image]
Prints all the images with a (Print
order) mark (page 85) regardless of the
displayed image.
[Select]
Selects images and prints all the selected images.
1
Select the image you want to print with b/B, then press z.
The mark appears on the selected image.
• To select other images, repeat this procedure.
2
Select [Print] with V, then press z.
[This image]
Prints a displayed image.
• If you select [This image] and set [Index] to
[On] in step 2, you can print a set of the same images as an index image.
2
Select print settings with v/V/b/B.
60min
2M
Index
Size
Date
Quantity
Off
Default
Off
1
Exit OK
[Index]
Select [On] to print as an index image.
[Size]
Select the size of the printing sheet.
[Date]
Select [Day&Time] or [Date] to insert the date and time on images.
• When you choose [Date], the date will be inserted in the order you select ( t
step 2 in
“Read This First”). This function may not be provided depending on the printer.
[Quantity]
When [Index] is set to [Off]:
Select the number of sheets of an image that you want to print. The image will be printed as a single image.
When [Index] is set to [On]:
Select the number of sets of images that you want to print as an index image. If you selected [This image] in step 1, select the number of the same image you want to print side by side on a sheet as an index image.
• The designated number of images may not all fit onto a single sheet depending on the quantity of images.
3
Select [OK] with V/B, then press z.
The image is printed.
• Do not disconnect the cable for multi-use terminal while the (PictBridge
Connecting) indicator appears on the screen.
60min
indicator
Printing
2/3
Exit
To print other images
After step 3, select [Select] and the desired image with v/V, then perform from step 1.
To print images on the index screen
Perform “Stage 1: Preparing the camera”
(page 81) and “Stage 2: Connecting the camera to the printer” (page 82), then
proceed with the following.
When you connect the camera to a printer, the print menu appears. Select [Cancel] to turn off the print menu, then proceed as follows.
1
Press
The index screen appears.
2
Press MENU to display the menu.
3
Select [ ] (Print) with B, then press z.
4
Select the desired printing method with v/
V, then press z.
All In
This Folder
DPOF image
Select
Cancel
Downloaded From camera-usermanual.com Sony Manuals
83
[Select]
Selects images and prints all the selected images.
Select the image you want to print with v/
V/b/B, then press z to display the mark. (Repeat this procedure to select other images.) Then, press MENU.
[DPOF image]
Prints all the images with a (Print order) mark regardless of the displayed image.
[All In This Folder]
Prints all the images in the folder.
5
Perform steps 2 and 3 of “Stage 3:
Printing at a shop
You can take a “Memory Stick Duo” containing images shot with your camera to a photo printing service shop. As long as the shop supports photo printing services conforming to the DPOF, you can make a
(Print order) mark on images in advance so that you do not need to reselect them when you print them out at the shop.
• You cannot print images stored in the internal memory at a print shop directly from the camera. Copy the images to a “Memory Stick
Duo”, then take the “Memory Stick Duo” to the print shop.
What is DPOF?
DPOF (Digital Print Order Format) is a function allowing you to make a (Print order) mark on images of “Memory Stick
Duo” that you want to print out later.
• You can also print the images with the
(Print order) mark using a printer that conforms to the DPOF (Digital Print Order Format) standard or using a PictBridge compliant printer.
• You cannot mark movies.
• When you mark images shot in [Multi Burst] mode, all the images are printed on one sheet divided into 16 panels.
When taking a “Memory Stick Duo” to a shop
• Consult your photo printing service shop as to what types of “Memory Stick Duo” they handle.
• If a “Memory Stick Duo” is not handled by your photo printing service shop, copy the images you want to print out to other medium such as a
CD-R and take it to the shop.
• Be sure to take the Memory Stick Duo Adaptor with it.
• Before you take image data to a shop, always copy (back up) your data to a disk.
• You cannot set the number of prints.
1
Marking in single-image mode
Display the image you want to print.
2
Press MENU to display the menu.
3
Select DPOF with b/B, then press z.
A (Print order) mark is marked on the image.
60min
2M
2/9
DPOF
Exit
BACK/NEXT
MENU button
Control button
4
To mark other images, display the
desired image with b/B, then
press z.
To remove the mark in single-image mode
Press z in step 3 or 4.
Downloaded From camera-usermanual.com Sony Manuals
85
Marking in index mode
1
Display the index screen (
t
step
6 in “Read This First”).
2
Press MENU to display the menu.
3
Select DPOF with b/B, then press z.
4
Select [Select] with v/V, then
press z.
• You cannot add a
Folder].
mark in [All In This
5
Select the image you want to
mark with v/V/b/B, then press z.
A green mark appears on the selected image.
Green mark
To cancel, select [Cancel] in step 4 or select
[Exit] in step 8, then press z.
To remove the mark in index mode
Select the images from which you want to remove the mark in step 5, then press z.
To remove all the marks in the folder
Select [All In This Folder] in step 4, then press z. Select [Off], then press z.
SELECT MENU TO NEXT
6
Repeat step 5 to mark other images.
7
Press MENU.
8
Select [OK] with B, then press z.
The mark turns white.
Connecting your camera to your TV
Viewing images on a TV screen
You can view images on a TV screen by connecting the camera to a TV.
Turn off both your camera and the TV before connecting the camera and the TV.
3
Turn on the TV and set the TV/ video input switch to “video.”
• For details, see the operating instructions supplied with the TV.
1
Connect the camera to the TV.
4
Set the mode switch to , and turn on the camera.
Mode switch
1
To audio/video input jacks
60min
VGA
2 / 9
101-0002
BACK/NEXT
2006 1 1
VOLUME
10:30
PM
2
To the multi connector
Cable for multi-use terminal
• Place the camera with the screen facing upwards.
• If your TV has stereo input jacks, connect the audio plug (black) of the cable for multi-use terminal to the left audio jack.
2
Set the switch on the cable for multi-use terminal to “TV”.
CAMERA TV
DISP SEL
Control button
Images shot with the camera appear on the TV screen.
Press b/B on the control button to select the desired image.
• When using your camera abroad, it may be necessary to switch the video signal output
to match that of your TV system (page 62).
Downloaded From camera-usermanual.com Sony Manuals
87
On TV color systems
If you want to view images on a TV screen, you need a TV with a video input jack and the cable for multi-use terminal. The color system of the TV must match that of your digital still camera. Check the following lists for the TV color system of the country or region where the camera is used.
NTSC system
Bahama Islands, Bolivia, Canada, Central
America, Chile, Colombia, Ecuador,
Jamaica, Japan, Korea, Mexico, Peru,
Surinam, Taiwan, the Philippines, the
U.S.A., Venezuela, etc.
PAL system
Australia, Austria, Belgium, China, Czech
Republic, Denmark, Finland, Germany,
Holland, Hong Kong, Hungary, Italy,
Kuwait, Malaysia, New Zealand, Norway,
Poland, Portugal, Singapore, Slovak
Republic, Spain, Sweden, Switzerland,
Thailand, United Kingdom, etc.
PAL-M system
Brazil
PAL-N system
Argentina, Paraguay, Uruguay
SECAM system
Bulgaria, France, Guiana, Iran, Iraq,
Monaco, Russia, Ukraine, etc.
Troubleshooting
Troubleshooting
If you experience trouble with your camera, try the following solutions.
1
Check the items on pages 90 to 100.
If a code such as “C/E:ss:ss” appears on the screen, see page 101.
2
Remove the battery pack, and insert the battery pack again after about one minute, and turn on the power.
3
Initialize the settings (page 60).
4
Consult your Sony dealer or local authorized Sony service facility.
Please understand that you give your consent that the contents of the internal memory, Music files may be checked when you send your camera to be repaired.
Downloaded From camera-usermanual.com Sony Manuals
89
Battery pack and power
The battery pack cannot be installed.
• As you insert the battery pack, use the tip of the battery pack to push the battery eject lever
• toward the bottom of the camera ( t
step 1 in “Read This First”).
Install the battery pack correctly ( t
step 1 in “Read This First”).
The battery remaining indicator is incorrect, or sufficient battery remaining indicator is displayed but the power runs out too quickly.
• This phenomenon occurs when you use the camera in an extremely hot or cold location
• The displayed battery remaining differs from the current one. Fully discharge and then charge the battery pack to correct the display.
• The battery pack is discharged. Install the charged battery pack ( t
step 1 in “Read This
First”).
•
The battery pack is dead (page 106). Replace it with a new one.
The battery pack runs down too quickly.
• Charge it sufficiently ( t
step 1 in “Read This First”).
•
You are using the camera in an extremely cold location (page 106).
•
The battery terminal is dirty. Clean the battery terminal with a cotton swab, etc., and charge the battery pack.
•
The battery pack is dead (page 106). Replace it with a new one.
Cannot turn on the camera.
• Install the battery pack correctly ( t
step 1 in “Read This First”).
•
The battery pack is discharged. Install charged battery pack ( t
step 1 in “Read This First”).
•
The battery pack is dead (page 106). Replace it with a new one.
The power turns off suddenly.
•
If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the battery pack. Turn on the camera again
•
( t
step 2 in “Read This First”).
The battery pack is discharged. Install charged battery pack ( t
step 1 in “Read This First”).
Shooting still images/movies
Your camera cannot record images.
•
Check the free capacity of the internal memory or “Memory Stick Duo” (pages 24, 25). If it is
full, do one of the following:
– Delete unnecessary images ( t
step 6 in “Read This First”).
–
Change the “Memory Stick Duo”.
•
You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 104).
•
You cannot record images while charging the flash.
• Set the mode switch to when shooting still images.
• Set the mode switch to when shooting movies.
•
The image size is set to [640(Fine)] when recording movies. Do one of the following:
–
Set the image size to other than [640(Fine)].
–
Insert a “Memory Stick PRO Duo” (page 104).
The subject is not visible on the screen.
• Set the mode switch to a position other than
Recording takes a long time.
•
The NR slow shutter function is activated (page 20). This is not a malfunction.
The image is out of focus.
•
The subject is too close. Shoot in (Macro) recording mode. Make sure to position the lens farther away from the subject than the shortest shooting distance, approximately 8 cm (3 1/4 inches) (W)/25 cm (9 7/8 inches) (T), when shooting. Or, set (Magnifying Glass) and focus from a distance of approx. 1 cm to 20 cm (13/32 inch to 7 7/8 inches) from the subject
( t
step 5 in “Read This First”).
• (Magnifying Glass) is set, or (Twilight mode), (Landscape mode) or
(Fireworks mode) is selected in the Scene mode when shooting still images.
•
The Focus preset function is selected. Select the auto focus mode (page 38).
•
Refer to “If the subject is out of focus” on page 39.
Optical zoom does not work.
•
When (Magnifying Glass) is selected, the optical zoom is not available.
Precision digital zoom does not function.
•
Set [Digital Zoom] to [Precision] (page 52).
• This function cannot be used while shooting movies.
Downloaded From camera-usermanual.com Sony Manuals
91
Smart zoom does not function.
•
Set [Digital Zoom] to [Smart] (page 52).
•
This function cannot be used when:
–
The image size is set to [7M] or [3:2].
– Shooting in Multi Burst mode.
– Shooting movies.
The flash does not work.
•
The flash is set to (Flash forced off) ( t
step 5 in “Read This First”).
•
You cannot use the flash when:
–
[Mode] (REC Mode) is set to [Burst], [Exp Brktg] or [Multi Burst] (page 42).
– (High sensitivity mode), (Twilight mode) or (Fireworks mode) is selected in the
– When the mode switch is set to .
•
Set the flash to (Flash forced on) when (Magnifying Glass) is set, or (Landscape mode), (Snow mode), (Beach mode) or (High-speed shutter mode) is selected in the Scene mode ( t
step 5 in “Read This First”).
Fuzzy specks appear in images shot using the flash.
•
Dust in the air reflected the flash light and appeared in the image. This is not a malfunction.
The close-up shoot function does not work.
•
(Twilight mode), (Landscape mode) or (Fireworks mode) is selected in the Scene
The date and time are not displayed.
•
While shooting, the date and time are not displayed. They are displayed only during playback.
The date and time are recorded incorrectly.
•
Set the correct date and time ( t
step 2 in “Read This First”).
The F value and shutter speed flash when you press and hold the shutter button halfway down.
•
The exposure is incorrect. Correct the exposure (page 37).
The image is too dark.
•
You are shooting a subject with a light source behind the subject. Select the metering mode
(page 40) or adjust the exposure (page 37).
•
The brightness of the screen is too low. Adjust the brightness of the LCD backlight (page 23).
The image is too bright.
•
You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the
•
The brightness of the screen is too bright. Adjust the brightness of the LCD backlight
The image colors are not correct.
•
Set [COLOR] (Color Mode) to [Normal] (page 36).
Vertical streaks appear when you are shooting a very bright subject.
•
The smear phenomenon is occurring. This phenomenon is not a malfunction.
Noise appears in the image when you view the screen in a dark place.
•
The camera is attempting to increase the visibility of the screen by temporarily brightening the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
•
Set [Red Eye Reduction] in the
(Setup) menu to [On] (page 53).
• Shoot the subject at a distance closer than the recommended shooting distance using the flash
( t
step 5 in “Read This First”).
• Light the room and shoot the subject.
Dots appear and remain on the screen.
•
This is not a malfunction. These dots are not recorded (page 8,
t
“Read This First”).
Cannot shoot images in succession.
•
The internal memory or “Memory Stick Duo” is full. Delete unnecessary images ( t
step 6 in
“Read This First”).
•
The battery level is low. Install charged battery pack.
Viewing images
Refer to “Computers” (page 95) in conjunction with the following items.
Your camera cannot play back images.
•
Set the mode switch to
•
The folder/file name has been changed on your computer (page 72).
•
When an image file has been processed by a computer or when the image file was recorded using a model other than that of your camera, playback on your camera is not guaranteed.
•
The camera is in USB mode. Delete the USB connection (page 70).
Downloaded From camera-usermanual.com Sony Manuals
93
The date and time are not displayed.
•
(Screen display switch) button is turned off (page 23).
The image appears rough right after playback starts.
•
The image may appear rough right after playback starts due to image processing. This is not a malfunction.
The image does not appear on the screen when a USB connection is made.
•
The switch on the cable for multi-use terminal is set to “TV”. Disconnect the cable for multi-
use terminal or set the switch to “CAMERA” (page 67).
The image does not appear on the TV screen.
•
Check [Video Out] to see if the video output signal of your camera is set to the color system of
•
Check whether the connection is correct (page 87).
•
The switch on the cable for multi-use terminal is set to “CAMERA”. Set to “TV” (page 87).
Deleting/Editing images
Your camera cannot delete an image.
•
Cancel the protection (page 47).
• You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 104).
You have deleted an image by mistake.
•
Once you have deleted an image, you cannot restore it. We recommend that you protect
images (page 46), or use the “Memory Stick Duo” with the write-protect switch and set the
switch to the LOCK position (page 104) to prevent accidental erasure.
The resizing function does not work.
• You cannot resize movies and Multi Burst images.
You cannot display a DPOF (Print order) mark.
•
You cannot display DPOF (Print order) marks on movies.
You cannot cut a movie.
•
The movie is not long enough to cut (shorter than about two seconds).
•
Cancel the protection (page 47).
• Still images cannot be cut.
Computers
You do not know if the OS of your computer is compatible with the camera.
•
Check “Recommended computer environment” on page 64 for Windows, and page 78 for
Macintosh.
Nothing appears on the camera screen when a USB connection is made.
•
The switch on the cable for multi-use terminal is set to “TV”. Set to “CAMERA” (page 67).
Your computer does not recognize your camera.
•
Turn on the camera ( t
step 2 in “Read This First”).
•
When the battery level is low, install the charged battery pack ( t
step 1 in “Read This
First”), or use the AC Adaptor (page 18).
•
Use the cable for multi-use terminal (supplied) (page 67).
• Disconnect the cable for multi-use terminal from both the computer and the camera, and
connect it again firmly. Make sure that “USB Mode Mass Storage” is displayed (page 67).
• Set [USB Connect] to [Mass Storage] in the
•
Disconnect all equipment other than the camera, the keyboard and the mouse from the USB connectors of your computer.
•
Connect the camera directly to your computer without passing through a USB hub or other
•
The software (supplied) is not installed. Install the software (page 65).
•
Your computer does not properly recognize the device because you connected the camera and your computer with the cable for multi-use terminal before you install the software (supplied).
Delete the erroneously recognized device from your computer, then install the USB driver
(see the next item).
The “Removable disk” icon does not appear on the computer screen when you connect your computer to the camera.
•
Follow the procedure below to install the USB driver again. The following procedure is for a
Windows computer.
1 Right-click [My Computer] to display the menu, then click [Properties].
The “System Properties” screen appears.
2 Click [Hardware] t
[Device Manager].
•
For Windows Me, click the [Device Manager] tab.
The “Device Manager” appears.
3 Right-click [ Sony DSC], then click [Uninstall] t
[OK].
The device is deleted.
4 Install the software (page 65).
A USB driver is also installed.
Downloaded From camera-usermanual.com Sony Manuals
95
You cannot copy images.
•
Connect the camera and your computer correctly making a USB connection (page 67).
•
Follow the designated copy procedure for your OS (pages 67, 78).
•
When you shoot images with a “Memory Stick Duo” formatted by a computer, you may not be able to copy the images to a computer. Shoot using a “Memory Stick Duo” formatted by
After making a USB connection, “Cyber-shot Viewer” does not start automatically.
•
Start “Media Check Tool” (page 73).
•
Make the USB connection after the computer is turned on (page 67).
The image cannot be played back on a computer.
•
If you are using “Cyber-shot Viewer,” refer to the Help.
•
Consult the computer or software manufacturer.
The image and sound are interrupted by noise when you view a movie on a computer.
•
You are playing back the movie directly from the internal memory or the “Memory Stick
Duo”. Copy the movie to the hard disk of your computer, then play back the movie from the
You cannot print an image.
•
Check the printer settings.
Images once copied to a computer cannot be viewed on the camera.
•
Copy them to a folder recognized by the camera, such as “101MSDCF” (page 71).
•
Cyber-shot Viewer
Images are not displayed correctly with “Cyber-shot Viewer”.
• Make sure the folder of the images is registered in “Viewed folders”. If the images are not
displayed even if the folder is registered in “Viewed folders”, update the database (page 76).
You cannot find images imported with “Cyber-shot Viewer”.
• Look in the “My Pictures” folder.
•
You want to change the “Folder to be imported”.
•
Access the “Import Settings” screen to change “Folder to be imported”. You can specify a
different folder after using “Cyber-shot Viewer” to register it in “Viewed folders” (page 76).
All imported images are displayed on the calendar with the date January 1.
•
The date has not been set on the camera. Set the date on the camera ( t
step 2 in “Read This
First”).
“Memory Stick Duo”
Cannot insert a “Memory Stick Duo”.
•
Insert it in the correct direction ( t
step 3 in “Read This First”).
Cannot record on a “Memory Stick Duo”.
• You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 104).
• The “Memory Stick Duo” is full. Delete unnecessary images ( t
step 6 in “Read This First”).
•
Insert a “Memory Stick PRO Duo” (page 24) when recording movies with the image size set
to [640(Fine)].
Cannot format a “Memory Stick Duo”.
• You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 104).
You have formatted a “Memory Stick Duo” by mistake.
•
All the data on the “Memory Stick Duo” is deleted by formatting. You cannot restore it. We recommend that you set the write-protect switch on the “Memory Stick Duo” to the LOCK
position to prevent accidental erasure (page 104).
“Memory Stick PRO Duo” is not recognized by a computer with a “Memory
Stick” slot.
•
Check that the computer and the card reader support “Memory Stick PRO Duo”. Users of computers and card readers made by manufacturers other than Sony should contact those manufacturers.
•
If “Memory Stick PRO Duo” is not supported, connect the camera to the computer (pages 67,
78). The computer recognizes the “Memory Stick PRO Duo”.
Internal memory
The camera or your computer cannot play back the data in the internal memory.
•
There is a “Memory Stick Duo” inserted in the camera. Remove it ( t
step 4 in “Read This
First”).
Downloaded From camera-usermanual.com Sony Manuals
97
Cannot record images using the internal memory.
•
There is a “Memory Stick Duo” inserted in the camera. Remove it ( t
step 4 in “Read This
First”).
The free capacity of the internal memory does not increase even when you copy the data stored in the internal memory to a “Memory Stick Duo”.
•
The data is not deleted after copying. Execute the [Format] command (page 56) to format the
internal memory after copying the data.
Cannot copy the data stored in the internal memory to a “Memory Stick Duo”.
•
The “Memory Stick Duo” is full. Check the capacity (64 MB or more recommended).
Cannot copy the data on the “Memory Stick Duo” or the computer to the internal memory.
•
Data on a “Memory Stick Duo” or a computer cannot be copied to the internal memory.
Printing
Also see “PictBridge compliant printer” (as follows) in conjunction with the following items.
Images are printed with both edges cut off.
•
When you print an image shot with the image size set to [16:9], both edges of the image may be cut off.
•
When printing images using your own printer, try canceling the trimming or borderless settings. Consult the printer manufacturer as to whether the printer provides these functions or not.
• When having images printed at a digital print shop, ask the shop whether they can print the images without cutting off both edges.
PictBridge compliant printer
A connection cannot be established.
•
The camera cannot be connected directly to a printer that is not compliant with the PictBridge standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
•
Check that the printer is turned on and can be connected to the camera.
•
Set [USB Connect] to [PictBridge] in the
•
Disconnect and connect the cable for multi-use terminal again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer.
Nothing appears on the camera screen when a USB connection is made.
•
The switch on the cable for multi-use terminal is set to “TV”. Set to “CAMERA” (page 82).
Cannot print images.
•
Check that the camera and the printer are properly connected using the cable for multi-use terminal.
•
Turn on the printer. For further information, refer to the operating instructions supplied with the printer.
•
If you select [Exit] during printing, images may not be printed. Disconnect and connect the cable for multi-use terminal again. If you still cannot print your images, disconnect the cable for multi-use terminal, turn the printer off and then on, then connect the cable for multi-use terminal again.
•
Movies cannot be printed.
• Images shot using cameras other than this camera or images modified with a computer may not be printed.
Printing is canceled.
• You disconnected the cable for multi-use terminal before the mark disappears.
(PictBridge Connecting)
Cannot insert the date or print images in the index mode.
• The printer does not provide these functions. Consult the printer manufacturer as to whether the printer provides these functions or not.
• The date may not be inserted in the index mode depending on the printer. Consult the printer manufacturer.
“---- -- --” is printed on the date-inserted part of the image.
• Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
to [Off] and print the image again (page 83).
Cannot select the print size.
• Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
• Disconnect the cable for multi-use terminal and reconnect it whenever you change the paper size after the printer has been connected to the camera.
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 83) or the printer.
Cannot operate the camera after canceling printing.
•
Wait for a while as the printer is carrying out the cancellation. It may take some time depending on the printer.
Downloaded From camera-usermanual.com Sony Manuals
99
Others
Your camera does not work.
•
Use the type of battery pack you can use with this camera (page 106).
•
The battery level is low (The E indicator appears). Charge the battery pack ( t
step 1 in
“Read This First”).
The power is on, but the camera does not work.
•
The built-in microcomputer is not working properly. Remove the battery pack, and then, after one minute, insert the battery pack and turn on the camera.
Cannot identify an indicator on the screen.
•
The lens gets fogged.
•
Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
The camera becomes warm when you use it for a long time.
•
This is not a malfunction.
The Clock Set screen appears when you turn on the camera.
• Set the date and time again ( t
step 2 in “Read This First”).
Warning indicators and messages
Self-diagnosis display
If a code starting with a letter of the alphabet appears, your camera has a selfdiagnosis display. The last two digits
(indicated by ss) will differ depending on the state of the camera.
If you are unable to solve the problem even after trying the following corrective actions a few times, your camera may need repair.
Contact your Sony dealer or local authorized Sony service facility.
C:32:ss
•
There is trouble with your camera’s hardware. Turn the power off and on again.
C:13:ss
•
The camera cannot read or write data on the “Memory Stick Duo”. Try turning off and on the camera again, or taking out and inserting the “Memory Stick
Duo” several times.
•
The internal memory has experienced a format error, or an unformatted
“Memory Stick Duo” is inserted.
Format the internal memory or the
• The inserted “Memory Stick Duo” cannot be used with your camera, or the data is damaged. Insert a new “Memory
E:61:ss
E:62:ss
E:91:ss
•
A camera malfunction has occurred.
Initialize the camera (page 60), then
turn the power on again.
Messages
If the following messages appear, follow the instructions.
E
•
The battery level is low. Charge the battery pack immediately ( t
step 1 in
“Read This First”). Depending on the conditions of use or the type of battery pack, the indicator may flash even though there are still 5 to 10 minutes of remaining battery time left.
For "InfoLITHIUM" battery only
•
This battery pack is not a
“InfoLITHIUM” type.
System error
•
Turn the power off and then on again
( t
step 2 in “Read This First”).
Internal memory error
• Turn the power off and then on again
( t
step 2 in “Read This First”).
Reinsert the Memory Stick
• Insert the “Memory Stick Duo” correctly.
• The inserted “Memory Stick Duo” cannot be used in your camera
• The “Memory Stick Duo” is damaged.
• The terminal section of the “Memory
Stick Duo” is dirty.
Memory Stick type error
•
The inserted “Memory Stick Duo” cannot be used in your camera
Format error
•
Format the media again (pages 56 and
Downloaded From camera-usermanual.com Sony Manuals
101
Memory Stick locked
•
You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position
No memory space in internal memory
No memory space in Memory Stick
•
Delete unnecessary images or files
( t
step 6 in “Read This First”).
Read only memory
•
Your camera cannot record or delete images on this “Memory Stick Duo”.
No file
•
No images have been recorded in the internal memory.
No file in this folder
•
No images have been recorded in this folder.
•
You did not operate correctly when copying images from your computer
Folder error
•
A folder with the same first three digit number already exists on the “Memory
Stick Duo” (for example: 123MSDCF and 123ABCDE). Select another folders, or create a new folder
Cannot create more folders
•
The folder with a name beginning with
“999” exists on the “Memory Stick
Duo”. You cannot create any folders if this is the case.
Cannot record
•
The camera cannot record images in the selected folder. Select a different folder
File error
• An error occurred while the image was playing back.
File protect
•
Release the protection (page 47).
Image size over
• You are playing back an image of a size that cannot be played back on your camera.
Cannot divide
• The movie is not long enough to be divided (shorter than about two seconds).
•
The file is not a movie.
Invalid operation
• You are trying to play back a file that is not compatible with the camera.
(Vibration warning indicator)
• Camera shake may occur due to insufficient light. Use the flash, turn on the anti-blur function, or mount the camera on a tripod to secure the camera.
640(Fine) is not available
•
640(Fine) size movies can be recorded only using a “Memory Stick PRO Duo”.
Insert a “Memory Stick PRO Duo” or set the image size to a size other than
[640(Fine)].
Enable printer to connect
•
[USB Connect] is set to [PictBridge], however the camera is connected to a non-PictBridge compliant device.
Check the device.
•
The connection is not established.
Disconnect and connect the cable for multi-use terminal again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer.
Connect to PictBridge device
•
You tried to print images before the printer connection was established.
Connect to a PictBridge compliant printer.
No printable image
• You tried to execute [DPOF image] without placing a DPOF (Print order) mark on the image(s).
• You tried to execute [All In This Folder] while a folder that holds only movies was selected. You cannot print movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
•
Check the printer.
Printer error
•
Check the printer.
•
Check if the image you want to print is corrupted.
Processing
•
The printer is canceling the current print job. You cannot print until it is finished.
This may take time, depending on the printer.
No image for Slide Show
•
The selected folder does not contain a file that can be played in a Slide Show with music.
Music Error
•
Delete the Music file, or replace it with a normal Music file.
•
Execute [Format Music], then download
Format Music Error
•
Execute [Format Music] (page 59).
•
The data transmission to the printer may not be completed yet. Do not disconnect the cable for multi-use terminal.
Downloaded From camera-usermanual.com Sony Manuals
103
Others
On the “Memory Stick”
A “Memory Stick” is a compact, portable
IC recording medium. The types of
“Memory Stick” that can be used with this camera are listed in the table below.
However, proper operation cannot be guaranteed for all “Memory Stick” functions.
Notes on using a “Memory Stick Duo”
(not supplied)
• You cannot record, edit or delete images if you slide the write-protect switch to LOCK with a fine-tipped object.
Terminal
“Memory Stick” type Recording/
Playback
Memory Stick
(without MagicGate)
Memory Stick
(with MagicGate)
Memory Stick Duo
(without MagicGate)
Memory Stick Duo
(with MagicGate)
MagicGate Memory Stick
MagicGate Memory Stick
Duo
Memory Stick PRO
Memory Stick PRO Duo
—
— a a
*1*2
— a
*1
— a
*1*2*3
*1
“Memory Stick Duo”, “MagicGate Memory
Stick Duo” and “Memory Stick PRO Duo” are equipped with MagicGate functions.
MagicGate is copyright protection technology that uses encryption technology. Data recording/playback that requires MagicGate functions cannot be performed with this camera.
*2
Supports high-speed data transfer using a parallel interface.
*3
640(Fine) size movies can be recorded.
• A “Memory Stick Duo” formatted with a computer is not guaranteed to operate with this camera.
• Data read/write speeds differ depending on the combination of the “Memory Stick Duo” and the equipment used.
Write-protect switch
Memo area
The position and/or the shape of the writeprotect switch may differ depending on the
“Memory Stick Duo” you use.
• Do not remove the “Memory Stick Duo” while reading or writing data.
• Data may be corrupted in the following cases:
– When the “Memory Stick Duo” is removed or the camera is turned off during a read or write operation
– When the “Memory Stick Duo” is used in locations subject to static electricity or electrical noise
• We recommend backing up important data.
• Do not press down hard when you write down on the memo area.
• Do not attach a label on the “Memory Stick
Duo” itself nor on a Memory Stick Duo
Adaptor.
• When you carry or store the “Memory Stick
Duo”, put it in the case supplied with it.
• Do not touch the terminal section of the
“Memory Stick Duo” with your hand or a metal object.
• Do not strike, bend or drop the “Memory Stick
Duo”.
• Do not disassemble or modify the “Memory
Stick Duo”.
• Do not expose the “Memory Stick Duo” to water.
• Do not leave the “Memory Stick Duo” within the reach of small children. They might accidentally swallow it.
• Do not use or store the “Memory Stick Duo” under the following conditions:
– High temperature locations such as the hot interior of a car parked in direct sunlight
– Locations exposed to direct sunlight
– Humid locations or locations with corrosive substances present
Notes on using the Memory Stick Duo
Adaptor (not supplied)
• To use a “Memory Stick Duo” with a “Memory
Stick” compliant device, be sure to insert the
“Memory Stick Duo” into a Memory Stick Duo
Adaptor. If you insert a “Memory Stick Duo” into a “Memory Stick” compliant device without a Memory Stick Duo Adaptor, you might not be able to remove it from the device.
• When inserting a “Memory Stick Duo” into a
Memory Stick Duo Adaptor, make sure the
“Memory Stick Duo” is inserted facing in the correct direction, then insert it all the way in.
Incorrect insertion may result in a malfunction.
• When using a “Memory Stick Duo” inserted into a Memory Stick Duo Adaptor with a
“Memory Stick” compliant device, make sure that the “Memory Stick Duo” is inserted facing the correct direction. Note that improper use may damage the equipment.
• Do not insert a Memory Stick Duo Adaptor into a “Memory Stick” compliant device without a
“Memory Stick Duo” attached. Doing so may result in malfunction of the unit.
Notes on using “Memory Stick PRO
Duo” (not supplied)
“Memory Stick PRO Duo” with a capacity up to
2 GB have been confirmed to operate properly with this camera.
Downloaded From camera-usermanual.com Sony Manuals
105
On the “InfoLITHIUM” battery pack
This camera requires an “InfoLITHIUM” battery pack (R type).
What is an “InfoLITHIUM” battery pack?
An “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions for exchanging information related to operating conditions with your camera. The
“InfoLITHIUM” battery pack calculates the power consumption according to the operating conditions of your camera, and displays the remaining battery time in minutes.
On charging the battery pack
We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C
(50°F to 86°F). You may not be able to efficiently charge the battery pack outside of this temperature range.
Effective use of the battery pack
• Battery performance decreases in low temperature surroundings. So, the time that the battery pack can be used is shorter in cold places. We recommend the following to ensure longer battery pack use:
– Put the battery pack in a pocket close to your body to warm it up, and insert it in your camera immediately before you start shooting.
• The battery pack will run out quickly if you use the flash or zoom frequently.
• We recommend having spare battery packs handy for two or three times the expected shooting time, and making trial shots before taking the actual shots.
• Do not expose the battery pack to water. The battery pack is not water-resistant.
• Do not leave the battery pack in extremely hot places, such as in a car or under direct sunlight.
On the remaining battery time indicator
The power may go off although the battery remaining indicator shows there is enough power to operate. Use the battery pack up and charge the battery pack fully again so that the indication on the battery remaining indicator is correct. Note, however, that the correct battery indication sometimes will not be restored if the battery pack is used in high temperatures for a long time, left in a fully charged state or used frequently.
How to store the battery pack
• If the battery pack is not to be used for a long time, fully charge it and then fully use it up once a year on your camera before storing the battery pack in a dry, cool place. Repeat this charging and using up once a year to maintain the battery pack’s function.
• To use the battery pack up, leave your camera in
slide show (page 30) playback mode until the
power goes off.
• To prevent staining the terminal, shortcircuiting, etc., be sure to use a supplied battery case when carrying and storing.
On battery life
• The battery life is limited. Battery capacity decreases little by little as you use it more and more, and as time passes. If the battery operating time seems shortened considerably, a probable cause is that the battery pack has reached the end of its life. Buy a new battery pack.
• The battery life varies according to how it is stored and the operating conditions and environment in which each battery pack is used.
On the battery charger
x
On the battery charger
• Do not charge any other battery pack except
Sony “InfoLITHIUM” battery packs in the battery charger supplied with your camera.
Batteries other than the specified kind may leak, overheat, or explode if you attempt to charge them, posing a risk of injury from electrocution and burns.
• Remove the charged battery pack from the battery charger. If you leave the charged battery pack in the charger, battery life may be shortened.
• When the CHARGE lamp flashes, this may indicate a battery error or that a battery pack other than the specified type have been inserted.
Check that the battery pack is the specified type.
If the battery pack is the specified type, remove the battery pack, replace it with new one or another one and check if the battery charger operates correctly. If the battery charger operates correctly, a battery error may have occurred.
• If the battery charger is dirty, charging may not be performed successfully. Clean the battery charger with dry cloth, etc.
Downloaded From camera-usermanual.com Sony Manuals
107
Precautions
x
Do not use/store the camera in the following places
• In an extremely hot, dry or humid place
In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction.
• Under direct sunlight or near a heater
The camera body may become discolored or deformed, and this may cause a malfunction.
• In a location subject to rocking vibration
• Near strong magnetic place
• In sandy or dusty places
Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired.
x
On carrying
Do not sit down in a chair or other place with the camera in the back pocket of your trousers or skirt, as this may cause malfunction or damage the camera.
x
On cleaning
Cleaning the LCD screen
Wipe the screen surface with an LCD cleaning kit
(not supplied) to remove fingerprints, dust, etc.
Cleaning the lens
Wipe the lens with a soft cloth to remove fingerprints, dust, etc.
Cleaning the camera surface
Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. Do not use the following as they may damage the finish or the casing.
• Chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent, sunscreen or insecticide, etc.
• Do not touch the camera with the above on your hand.
• Do not leave the camera in contact with rubber or vinyl for a long time.
x
On operating temperatures
Your camera is designed for use under the temperatures between 0°C and 40°C (32°F and
104°F). Shooting in extremely cold or hot places that exceed this range is not recommended.
x
On moisture condensation
If the camera is brought directly from a cold to a warm location, moisture may condense inside or outside the camera. This moisture condensation may cause a malfunction of the camera.
Moisture condensation occurs easily when:
• The camera is brought from a cold location such as a ski slope into a warmly heated room.
• The camera is taken from an air-conditioned room or car interior to the hot outdoors, etc.
How to prevent moisture condensation
When bringing the camera from a cold place to a warm place, seal the camera in a plastic bag and allow it to adapt to conditions at the new location over about an hour.
If moisture condensation occurs
Turn off the camera and wait about an hour for the moisture to evaporate. Note that if you attempt to shoot with moisture remaining inside the lens, you will be unable to record clear images.
x
On the internal rechargeable battery
This camera has an internal rechargeable battery for maintaining the date and time and other settings regardless of whether the power is on or off.
This rechargeable battery is continually charged as long as you are using the camera. However, if you use the camera for only short periods, it discharges gradually, and if you do not use the camera at all for about one month it becomes completely discharged. In this case, be sure to charge this rechargeable battery before using the camera.
However, even if this rechargeable battery is not charged, you can still use the camera as long as you do not record the date and time.
Charging method of the internal rechargeable battery
Insert charged battery pack in the camera, or connect the camera to a wall outlet (wall socket) using the AC Adaptor (not supplied), and leave the camera for 24 hours or more with the power off.
Charging method of the
“InfoLITHIUM” battery pack
t
step 1 in “Read This First”
Downloaded From camera-usermanual.com Sony Manuals
109
Specifications
Camera
[System]
Image device 7.20 mm (1/2.5 type) color
CCD, Primary color filter
Total pixel number of camera
Approx. 7 410 000 pixels
Effective pixel number of camera
Approx. 7 201 000 pixels
Lens Carl Zeiss Vario-Tessar
3× zoom lens f = 6.33 – 19.0 mm (38 –
114 mm when converted to a
35 mm still camera)
F3.5 – 4.3
Exposure control Automatic exposure, Scene
Selection (9 modes)
White balance Automatic, Daylight, Cloudy,
Fluorescent, Incandescent,
Flash
File format (DCF compliant)
Still images: Exif Ver. 2.21
JPEG compliant, DPOF compatible
Movies: MPEG1 compliant
(Monaural)
Recording media Internal Memory (58 MB)
“Memory Stick Duo”
Flash Recommended distance (ISO set to Auto): approx. 0.1 to
3.4 m (4 to 133 7/8 inches)
(W)/approx. 0.25 to 2.7 m
(9 7/8 to 106 3/8 inches) (T)
[Input and Output connectors]
Multi connector
USB communication
Hi-Speed USB (USB 2.0 compliant)
[LCD screen]
LCD panel 7.5 cm (3.0 type) TFT drive
Total number of dots
230 400 (960×240) dots
[Power, general]
Power Rechargeable battery pack NP-
FR1, 3.6 V
AC-LS5K AC Adaptor (not supplied), 4.2 V
Power consumption (during shooting)
1.1 W
Operating temperature
0 to 40°C (32 to 104°F)
Storage temperature
–20 to +60°C (–4 to +140°F)
Dimensions
Mass
95×56.5×23.3 mm
(3 3/4×2 1/4×15/16 inches)
(W/H/D, excluding protrusions)
Approx. 169 g (6.0 oz)
(including NP-FR1 battery pack and wrist strap, etc.)
Microphone Electret condenser microphone
Speaker
Exif Print
Dynamic speaker
Compatible
PRINT Image Matching III
Compatible
PictBridge Compatible
BC-CS3 battery charger
Power requirements
AC 100 to 240 V, 50/60 Hz,
3.2 W
Output voltage DC 4.2 V, 500 mA
Operating temperature
0 to 40°C (32 to 104°F)
Storage temperature
–20 to +60°C (–4 to +140°F)
Dimensions Approx. 66×23×91 mm
(2 5/8×29/32×3 5/8 inches)
(W/H/D)
Mass Approx. 70 g (2.7 oz)
Rechargeable battery pack NP-FR1
Used battery Lithium-ion battery
Maximum voltage
DC 4.2 V
Nominal voltage DC 3.6 V
Capacity 4.4 Wh (1 220 mAh)
Design and specifications are subject to change without notice.
Downloaded From camera-usermanual.com Sony Manuals
111
Index
Index
A
AC Adaptor...........................18
First”
t in “Read This First”
Adjusting EV ........................37
AE/AF lock indicator ...........39
First”
AF Illuminator ......................54
AF lock .................................39
AF Mode...............................52
AF range finder frame ..........38
AF range finder frame indicator.........................38
Aperture................................14
Auto adjustment mode
First”
Auto Focus............................13
t step 2 in “Read This
First”
Auto Review .........................54
B
B&W ....................................36
Battery charger ...................107
First”
Battery pack
Battery life.....................27
t step 1 in “Read This
First”
t step 1 in “Read This
First”
t step 1 in “Read This
First”
t step 5 in “Read This
First”
Beep ..................................... 59 t step 5 in “Read This
First”
Blur ...................................... 13
Bracket Step ......................... 43
Burst..................................... 42
C
terminal............. 67, 82, 87
Camera 1 .............................. 52
Camera 2 .............................. 55
Center AF............................. 38
Center-weighted metering.... 40
Change REC. Folder ............ 58
t step 1 in “Read This
First”
Cleaning ............................. 108
Clock Set.............................. 62
Cloudy.................................. 40
Color .................................... 15
Color Mode .......................... 36
Compression ratio ................ 16
Computer ............................. 63
Macintosh ..................... 78
environment ............ 64, 78
Software............ 65, 73, 77
Viewing image files stored on a computer with your camera........................... 72
Windows ....................... 63
Connecting
Computer ...................... 67
Printer ........................... 82
TV................................. 87
Contrast ................................ 44
Copy ..................................... 58
Copying images to your computer ....................... 66
Create REC. Folder .............. 57
Cyber-shot Viewer................ 73
D
Daylight ................................ 40
DC IN jack ........................... 18
Delete
Format ..................... 56, 57
First”
Digital Zoom ........................ 52
DirectX ................................. 64
Divide ................................... 48
DPOF.................................... 85
E
Effective pixels ................... 110
t step 1 in “Read This
First”
EV......................................... 37
Exposure............................... 14
Exposure Bracket ................. 42
Extension ........................ 71, 72
F
File name .............................. 71
File Number.......................... 61
File storage destination......... 71
Fine....................................... 41
t step 5 in “Read This
First”
Flash ..................................... 40
t step 5 in “Read This
First”
t step 5 in “Read This
First”
Flash Level............................44
Flash mode
First”
Fluorescent............................40
Focus...............................13, 38
Focus preset ..........................38
Folder ....................................45
Changing .......................58
Creating .........................57
Format.............................56, 57
Function Guide .....................53
Internal memory ................... 25
Internal Memory Tool .......... 56
Internal rechargeable battery ......................... 109
Interval ................................. 43
ISO ................................. 14, 41
J
JPG ....................................... 71
H
t step 5 in “Read This
First”
t step 5 in “Read This
First”
Histogram .......................23, 37
t step 5 in “Read This
First”
I
Identifying parts....................17
Image file storage destinations and file names................71
Image quality ..................15, 41
Image size .............................15
First”
Incandescent .........................40
Index mode printing..............81
t step 6 in “Read This
First”
Indicator............... see “Screen”
“InfoLITHIUM” battery pack .................106
Initialize ................................60
Install ....................................65
L
t step 5 in “Read This
First”
Language .............................. 59
First”
LCD Backlight ..................... 59
LCD Screen..........see “Screen”
M
M AF .................................... 52
Macintosh computer............. 78
Recommended environment .................. 78
t step 5 in “Read This
First”
t step 5 in “Read This
First”
Mass Storage ........................ 61
“Memory Stick Duo” ......... 104
t step 3 and 4 in “Read
This First”
Number of images/ recording time ............... 24
Memory Stick Tool .............. 57
Downloaded From camera-usermanual.com Sony Manuals
Menu.....................................33
Items ..............................34
Shooting ........................36
Viewing .........................45
Metering Mode .....................40
Mode.....................................42
Moisture condensation........108
Monitor .................................52
MPG .....................................71
Multi AF ...............................38
Multi Burst............................42
Multi connector ....................18
Multi-pattern metering..........40
Multipoint AF .......................38
Music ....................................31
Music Transfer................77, 79
N
Natural ..................................36
NR slow shutter ....................20
NTSC ....................................62
Number of images/Recording time................................24
O
Optical zoom ........................52
First”
OS ...................................64, 78
Overexposure........................14
P
PAL .......................................62
PC ................... see “Computer”
PictBridge .......................61, 81
Pixel ......................................15
t step 6 in “Read This
First”
Playback ............see “Viewing”
Playback/Edit........................28
113
Precautions .........................108
Precision digital zoom ..........52
Pressing halfway down .........13
First”
Print ......................................80
Index mode....................81
Print order mark....................85
Printing at a shop ..................85
Printing directly ....................81
Program auto shooting..........28
Protect...................................46
PTP .......................................61
Q
t step 5 in “Read This
First”
R
REC Mode ............................42
Red Eye Reduction ...............53
Resize ...................................47
t step 6 in “Read This
First”
Rotate....................................48
S
S AF......................................52
Scene Selection.....................29
First”
Screen
Indicator ........................19
LCD backlight...............23
Self-diagnosis display.........101
t step 5 in “Read This
First”
Sepia..................................... 36
t step 2 in “Read This
First”
Setup ........................ 44, 50, 51
Camera 1....................... 52
Camera 2....................... 55
Setup 1 .......................... 59
Setup 2 .......................... 61
Setup 1 ................................. 59
Setup 2 ................................. 61
Sharpness ............................. 44
Shooting
t step 5 in “Read This
First”
t step 5 in “Read This
First”
Shooting menu ..................... 36
t step 5 in “Read This
First”
Shutter speed........................ 14
Single ................................... 52
Single-image mode printing ......................... 81
Slide Show ........................... 30
t step 5 in “Read This
First”
Smart zoom .......................... 52
t step 5 in “Read This
First”
t step 5 in “Read This
First”
Software ................... 65, 73, 77
Specifications ..................... 110
Spot AF ................................ 38
Spot metering ....................... 40
Spot metering cross hairs ..... 40
Standard................................ 41
STEADY SHOT ................... 55
T
Trimming.............................. 50
Troubleshooting.................... 89
TV......................................... 87
t step 5 in “Read This
First”
t step 5 in “Read This
First”
U
Underexposure...................... 14
USB Connect........................ 61
t step 1 in “Read This
First”
V
t step 4 in “Read This
First”
Video Out ............................. 62
Viewing
t step 6 in “Read This
First”
t step 6 in “Read This
First”
Viewing menu....................... 45
Vivid ..................................... 36
t step 6 in “Read This
First”
W
Warning indicators and messages ..................... 101
WB ....................................... 40
White balance .......................40
Windows computer ...............63
Recommended environment ...................64
t in “Read This First”
Write-protect switch ...........104
Z
t step 5 in “Read This
First”
Downloaded From camera-usermanual.com Sony Manuals
115
Trademarks
• is a trademark of Sony
Corporation.
• “Memory Stick”, , “Memory Stick PRO”,
, “Memory Stick Duo”,
, “Memory Stick PRO and
Corporation.
are trademarks of Sony
• “InfoLITHIUM” is a trademark of Sony
Corporation.
• Microsoft, Windows and DirectX are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/ or other countries.
• Macintosh, Mac OS, iMac, iBook, PowerBook,
Power Mac and eMac are trademarks or registered trademarks of Apple Computer, Inc.
• Intel, MMX, and Pentium are trademarks or registered trademarks of Intel Corporation.
• In addition, system and product names used in this manual are, in general, trademarks or registered trademarks of their respective developers or manufacturers. However, the ™ or
® marks are not used in all cases in this manual.
Downloaded From camera-usermanual.com Sony Manuals
117
Downloaded From camera-usermanual.com Sony Manuals
119
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 7 Notes on using your camera
- 10 Table of contents
- 13 Enjoying the camera
- 13 Basic techniques for better images
- 17 Identifying parts
- 19 Indicators on the screen
- 23 Changing the screen display
- 24 Number of still images and recording time of movies
- 25 When you do not have a “Memory Stick Duo” (Recording with the internal memory)
- 27 Battery life and number of images that can be recorded/viewed
- 28 Using the mode switch
- 30 Using the Slide Show
- 33 Using the menu
- 33 Using menu items
- 34 Menu items
- 36 Shooting menu
- 45 Viewing menu
- 51 Using the Setup screen
- 51 Using Setup items
- 52 Camera 1
- 55 Camera 2
- 56 Internal Memory Tool
- 57 Memory Stick Tool
- 59 Setup 1
- 61 Setup 2
- 63 Using your computer
- 63 Enjoying your Windows computer
- 65 Installing the software (supplied)
- 66 Copying images to your computer
- 72 Viewing image files stored on a computer with your camera (using a “Memory Stick Duo”)
- 73 Using the “Cyber-shot Viewer” (supplied)
- 77 Using the “Music Transfer” (supplied)
- 78 Using your Macintosh computer
- 80 Printing still images
- 80 How to print still images
- 81 Printing images directly using a PictBridge compliant printer
- 85 Printing at a shop
- 87 Connecting your camera to your TV
- 87 Viewing images on a TV screen
- 89 Troubleshooting
- 89 Troubleshooting
- 101 Warning indicators and messages
- 104 Others
- 104 On the “Memory Stick”
- 106 On the “InfoLITHIUM” battery pack
- 107 On the battery charger
- 108 Precautions
- 110 Specifications
- 112 Index
- 112 Index