Veken W80-W Automatic Pet Feeder User Manual
Veken W80-W automatic pet feeder is a Wi-Fi enabled device that allows you to feed your pet remotely and on a schedule. It has a 4L capacity and can hold dry food pellets between 2-15mm in size. The feeder is equipped with a desiccant valve to keep kibble dry and fresh, and a top lid to protect kibble from pet access. You can program up to 8 meals per day, with portion sizes adjustable in 5g increments. The feeder also features a recording function that allows you to record a message for your pet to hear when it's time to eat.
Advertisement
Advertisement
Automatic
Pet Feeder
User Manual
Wi Fi
4L
Specification
Programming: up to 8 meals per day. portionable in 5g increments, max. filling 200g.
Product Weight: 1.5kg (without batteries and food)
Product Size: L206mm x W341mm x H321mm
Capacity: 4L (dry food pellets between 2-15mm only )
Dual Power Supply: Output DC power adapter, 5V - 1A // 3 x D battery.
Battery power alone lasts for up to 30 days.
To prevent food jams, the grain size should not exceed 15mm.
Batteries are not included.
Product Features
Desiccant valve keeps kibble dry and fresh.
2 Top lid to protect kibble from pet access.
Transparent food canister to check filling status.
4
Detachable body for easy maintenance.
5
Separate 304 stainless steel food bowl.
6
Dual power supply, works through power loss.
5
2
Setting up the Feeder
1 Assemble the food bucket, lid and food trays as shown below pictures.
Insert the food bucket into the slot and rotate clockwise to lock.
Rotate clockwise to fix the lid.
Insert the feeding tray into the bottom slot.
2 Dual power mode: Connect the USB cable to the machine and plug in the power adapter. If you do not wish to use the power adapter for power supply, install 3 D-type batteries on the bottom of the machine. Dual power supply is recommended.
6
4
3 Open the lid as shown below and lock after food is added.
Ensure the battery poles are correctly directed.
Rotate counterclockwise to open Rotate clockwise to lock
Operating the Touch Panel
1 Status Indicator
Flashing green light: It means reset successfully and enter the Wireless Access Point Mode.
Steady red light: It is only battery powered or the device is offline.
Steady green light: Connection succeeded.
Red and green lights appear at the same time:
Device is locked or unlocked.
2 Setting button
Standby status: Short Press-Manual feeding.
Setting status: Long Press-Enter Wireless
Access Point Mode and waiting for connections.
Please follow the instructions on the App.
1
3 Recording button
Standby status:
Long Press-Record or cancel recording.
Short Press-Play record.
2
4 Microphone
When you press and hold the recording button on the device or click the recording button on the App, please speak loudly into the device microphone,not the mobile phone.
Note:
If you want to lock or unlock the equipment, you can long press and hold the “ ” and the
“ ” at the same time.
When using battery power alone, the device will automatically disconnect from the network, but it will feed at the previously set time.
On battery supply only,the feeder works up to 30 days.
3
4
Operation Guide
( 1 ) Testing before use
Ensure the feeder is normally powered.
Short Press the setting button , the feeder instantly release one portion. Repeat this step for 3 times to make sure the feeder work normally.
( 2 )Distribution Network Guidelines
Download and install the App
Scan the QR code on the right to enter the APP download page and follow the instructions on the page to download and install.
Note:
If you cannot download the app by scanning the code, pls follow another way to download the app.
Another Way To Download The App
Mobile phone brands
Apple
Where To Download The App
The Apple Store
HUAWEI
An Android phone except HUAWEI phones
The Huawei App Gallery
The Google Play
Please go to the app store to update the app and upgrade the device regularly to get a better experience.
Registration
Follow the wizard to complete the registration and login.
Add device
On the main interface of the App, click the "Add device" button to enter the Add Device Wizard.
Operation Guide
Device networking
Follow the instructions of the App wizard to connect the device to the network; if the network fails, please refer to the App page prompts for operation.
How to update the device?
Important Notes
( 1 ) Cleaning and maintenance
Turn off the power and unplug the adapter before cleaning.
The food tray, food buckets, and lid can be removed for washing with a soft cloth.
Avoid submerging the main unit in water, simply clean with a damp cloth.
Warning
Do not submerge the main unit in water as this will damage the electronic components and void the warranty.
When there is a small red dot, it means you can upgrade, otherwise the click will be invalid.
Precautions and troubleshooting for reasons for network failure:
Please make sure to use the USB power adapter to supply power when the device is configured to the network.
Before configuring the network, please long press the "Settings" button to reset the device,Hearing "Di-Di-Di" sound indicates that the reset is complete.
When connecting the product to the network, please make sure that the mobile phone is as close as possible to the product.
According to the App prompt, if your product only supports 2.4GHz Wi-Fi communication, when you select the current home Wi-Fi network,Please pay attention to select 2.4GHz network.
It is recommended that the number of connected devices under the same router should not exceed 10 to avoid the influence of unstable signals on the network.
If the router or Wi-Fi name password is changed, you need to repeat the above process to reconnect to the Internet.
As the product technology is updated, the content of the App may be changed, and the actual display guide in the
App shall prevail.
Food bowl, stainless steel bowl, food bucket and lid can be washed in the sink.
Warning: The main unit can not be submerged in water.
( 2 ) FAQs Answer
Unable to feed
The mouth is blocked, please clean the mouth in time
Network connection failed
Please check whether it is powered by USB. The network cannot be connected under battery power supply.
The device is too far away from the router, please keep the device as close as possible to the router.
Please confirm whether the network is a 2.4 G band network. This product does not support a 5G band network.
Long press the "Settings" button to restore factory settings and reconnect.
The device restarts automatically
The battery is low, please replace the battery.
The plug is in poor contact and the power supply is insufficient. Please insert the USB plug properly.
(Note: When using battery power alone, the device will automatically disconnect from the network, but it will feed at the previously set time.
Unable to record
The recording on the mobile phone only supports saving one recording content. Moreover, when recording on a mobile phone, only when speaking into the microphone of the device will the sound be recorded.There is no microphone on the phone.
Cannot control the same device with two phones
We support up to 8 mobile phones (sharing 1 email account) to control the same device; 1 email account can be connected to up to 10 devices.
However, only 1 email account can be used to connect to the same device.
Warning
Do not put your fingers into the food outlet or try to touch the rotor.
This product requires 3 D-type batteries.
Note: Batteries should be removed from the device if it’s not used for an extended period of time to avoid damage through leakage.
This unit is made for dry food only.
In order to prevent food jams, the pellet size should not exceed 15mm.
If the device is powered by batteries only,the batteries will last up to 30 days under normal usage.
Batteries are not included in the package.
When you fail to connect and follow the steps to reconnect, please reset the device so that the green light keeps flashing quickly.
Warranty Information
TWO YEAR NON-TRANSFERRABLE LIMITED WARRANTY
To provide customers with a quality user experience, we guarantee to replace any defective products, issue refunds, or provide other acceptable solutions (as customers prefer) 2 years from the date of purchase
Proof of purchase must be provided (Amazon order number or receipt) when making a claim to our customer support center.
Warranty registration may be requested within a month since the date of purchase, by sending your Amazon order number to the mailbox: [email protected].
Price matching policy is not applicable. No price difference refund.
Sellers are the responsible party. Amazon allows different sellers to sell the same product, so please confirm the seller by checking the order details before contacting us.
WHAT IS COVERED
1. Product that Manufacturer finds defective;
2. Products with missing or damaged parts; Manufacturer may replace missing or damaged parts.
WHAT IS NOT COVERED
1. Purchased from non-Amazon channel or other physical stores;
2. Gift without proof of purchase;
3. Tampering/abnormal use/ accidental damage or commercial use;
4. Replacements and parts;
5. Installation fee/ labor fee.
Making a claim
If you have any problems when using our products, you can choose any of the methods to reach out to us.
Toll free 1-888-281-8150 Mon-Fri, 12pm-8pm EST
Email: [email protected] (24/7)
30 days free Return & Replacement
2-Year Product Warranty
Have a Question For The Seller?
Home
Your Order
Buy Again
Your Wish List
Your Account
Shop by Department
Your Orders
Product link
Buy it again
Write a product review
View order details
1. Find your order
View order details
Order #
Order Total
Shipped
Product link
Qty:1
Sold By: Seller
3. Click the “Seller name”
2. Click “View order details”
BRAND
Have a question for the seller?
Ask a question
4. Click “Ask a question”
Gifted parts, replacements, consumable products are not covered by the 2-year warranty.
Manufacturer’s warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from.
Please review the warranty carefully, and contact the manufacturer if you have any questions.
V1.5 20210520
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Public link updated
The public link to your chat has been updated.
Advertisement