MINI POCKET PRINTER
User Manual
MP300
Introduction
Thank you for choosing the intelligent digital products
produced by our company. We have equipped with
detailed instruction.
Please read the instruction carefully before you start
using this machine, so that you can use this product
correctly.
Product: MINI POCKET PRINTER
Model Name: MP300
Note: The image shown here is indicative only.
Please refer to the product you actually purchased.
Product List
Mini Pocket Printer * 1
User Manual * 1
USB Cable *1
— 01 —
Product Sketch
----- © Power Button
Press and hold 3
seconds to turn on/off
_ Press twice to print
a device information
loo. @ USB Data Cable
Connect your phone
charger or computer
App Printing Driver Download
Google play or App store to search for iBleem.
# Download on the
a App Staore » Google Play
Y Download on the
Power Indicator Status
White light on: Fully charged / Normal use status.
White light flash: Charging / Out of paper / Over-heat /
Cover opened.
Low power. It will cause the print to be light .
Please charge in time.
— 02 —
Connect to Print
App printing: Turn on the device, following the
"¡Bleem" App prompts to search and connect printer. Or
Double-click the power button to print the QR code,
then use the App to scan the code to connect printer.
Charging Instructions
Open/Close Cover and Change Paper
+ Front cover
| Print side |!
up
N
Push away need 10 be exposed Push the cover
DC SV 1A input charging. Recommended to use
mobile phone adapter for charging;
Recommended to fully charge for the first time;
If it is not used for a long time, please charge it every 3
months to avoid long-term natural loss of lithium
battery.
© Open Cover @ Paper Loading © Close Cover
Clean the Printer Head
- Please turn off the printer and take out the paper inside.
- Dip a cotton cloth or cotton swab with medical alcohol
and wipe it gently from the center to periphery of the
print head.
- Do not use the printer immediately after cleaning the
print head, Please wait 1- 2 minutes for the alcohol to
completely evaporate.
NS
especially after printing, to prevent
overheating and burns.
— 04 —
Do not touch the print head directly,
Battery Warning Note
1. Please use 5V charger to charge according to the
specification to avoid damage to the machine.
2. Disassembly, impact, extrusion or fire are prohibited.
3. If severe bulging occurs, do not continue to use.
4. Do not put in high temperature environment, battery
after immersion is prohibited to use.
5. Replacement with the wrong type of battery can be
explosive, be sure to follow the instructions to dispose
of used batteries.
A\ Attention
1. when charging, please gently insert or pull out the
charging line to prevent excessive force damage to the port.
2. After charging, please unplug the charging line in time.
3. In order to avoid danger, do not use or charge in high
temperature, high humidity, excessive smoke and dust
environment. such as: bathroom, steam room, open fire, etc.
4. Improper charging may lead to print head damage.
5. Do not touch the print head to prevent overheating and
scalding.
6. Tear paper blade sharp, be careful not to touch.
7. Contains small parts, not suitable for children under three
years of age to use. — 05—
Size: 80*95MM
changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses,and can radiate radio
frequency energy, and if not installed and used т
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician
for help.
">
