ABB Ground Kit TGL6 Installation instructions

Catalog No. Qty

TGL6 1 Ground Kit

INSTALLATION INSTRUCTIONS:

Mount in the two holes provided in the back wall of the enclosure by placing the spacers under the holes in the strap. Secure to the enclosure with the two self-threading screw provided.

Place the ground kit wiring instruction label in a visible location next to the installation.

CAUTION: Turn off power before working inside this equipment.

—

Terminal Information:

Wire Range: 2-250MCM CU/AL

—

ABB Inc. 305 Gregson Drive Cary, NC 27511

Tightening Torque: 180-200 Inch-lbs. electrification.us.abb.com

GE is a trademark of GE. Manufactured by ABB Inc. under license from GE.

1SQC920037M0201, GEJ5128 September 2019

Catalog No. Qty

TGL6 1 Ground Kit

INSTALLATION INSTRUCTIONS:

Mount in the two holes provided in the back wall of the enclosure by placing the spacers under the holes in the strap. Secure to the enclosure with the two self-threading screw provided.

Place the ground kit wiring instruction label in a visible location next to the installation.

CAUTION: Turn off power before working inside this equipment.

—

Terminal Information:

Wire Range: 2-250MCM CU/AL

—

ABB Inc. 305 Gregson Drive Cary, NC 27511

Tightening Torque: 180-200 Inch-lbs. electrification.us.abb.com

GE is a trademark of GE. Manufactured by ABB Inc. under license from GE.

1SQC920037M0201, GEJ5128 September 2019

Catalog No. Qty

TGL6 1 Ground Kit

INSTALLATION INSTRUCTIONS:

Mount in the two holes provided in the back wall of the enclosure by placing the spacers under the holes in the strap. Secure to the enclosure with the two self-threading screw provided.

Place the ground kit wiring instruction label in a visible location next to the installation.

CAUTION: Turn off power before working inside this equipment.

—

Terminal Information:

Wire Range: 2-250MCM CU/AL

—

ABB Inc. 305 Gregson Drive Cary, NC 27511

Tightening Torque: 180-200 Inch-lbs. electrification.us.abb.com

GE is a trademark of GE. Manufactured by ABB Inc. under license from GE.

1SQC920037M0201, GEJ5128 September 2019

Catalog No. Qty

TGL6 1 Ground Kit

INSTALLATION INSTRUCTIONS:

Mount in the two holes provided in the back wall of the enclosure by placing the spacers under the holes in the strap. Secure to the enclosure with the two self-threading screw provided.

Place the ground kit wiring instruction label in a visible location next to the installation.

CAUTION: Turn off power before working inside this equipment.

—

Terminal Information:

Wire Range: 2-250MCM CU/AL

—

ABB Inc. 305 Gregson Drive Cary, NC 27511

Tightening Torque: 180-200 Inch-lbs. electrification.us.abb.com

GE is a trademark of GE. Manufactured by ABB Inc. under license from GE.

1SQC920037M0201, GEJ5128 September 2019