- Industrial & lab equipment
- Electrical equipment & supplies
- Electrical connection
- Power extensions
- User manual
advertisement
Micro Inverter
W V C 1 2 0 0
User Manual
Green Energy
Micro Inverter
Expert http://www.kaidengdg.com
东莞市凯登能源科技有限公司
DongGuan KaiDeng Energy Technology Co., Ltd.
Add.:4F,FuYuan Business Center,MaiYuan Rd.,Xin'An,Chang'An, DongGuan,
GuangDong, China. Fax:+86-769-8188 8841 E-Mail:[email protected]
☎ Hot Line
+86-769-8188 8842/43
※What's mentioned in the manual are all owned by KaiDeng . Please regard the real production as the truth . The content involved changes without prior notice .KaiDeng Energy has the sole and final right of interpretation。※
About KaiDeng http://www.kaidengdg.com
DongGuan KaiDeng Energy Technology Co., LTD. is a high- technology enterprise which is concentrate on all series of solar energy, wind energy on/off grid micro inverter and switch power supply’research and development, design and production.
KaiDeng devotes to provide the high quality, high usability and low-cost products for the users to meet their demands of maximization, diversity. All products of KaiDeng have full autonomy intellectual property and tens of core technical patents. It’s one of the technical leader manufacturers of micro inverter in the global and the first put forward and apply a number of innovative technologies in the industry which is one of the important contributors of micro inverter technology. In the change with each passing day of new century, Kaideng will be put more enthusiasm to continue join in the new energy technology application of global boom and struggle to create a green earth.
KaiDeng Products Overview ---more about KaiDeng
S a m p l e A p p l i c a t i o n
Ground Generation System
LED Street System
Small Generation System
B I P V
Home Station
Farming Generation System
MW Power Station
Farming Power Supply
K a i D e n g P ro d u c t L i n e
Grid Tie Micro Inverter
Solar GTI Series
Solar WV Series
300W 500W 800W 1KW
230W 250W 300W 500W
Wind GTI Series
Solar WVD Series
300W 500W 800W 1KW
100W 150W 230W 260W
600W 1KW 2KW 3KW 4KW Solar WVC Series
5KW 6KW
Off-Grid Micro Inverter
PSW Series
8KW 10KW
200W 300W 500W 1KW 2KW 3KW
260W 300W 350W
800W 1200W
4KW 5KW
1/6
PV panel 1-1
Micro Inverter WVC1200 User Manual
KaiDeng WVC Series Installation
Grid
PV panel 1-2 PV panel n-1 PV panel n-2
WVC-Filter
Inverter 1 Inverter n
PV panel 1-3 PV panel 1-4 PV panel n-3
Case Diagram
PV panel n-4
WVC-Modem
Monitoring System
KaiDeng Energy Technology Co., Ltd. http://www.kaidengdg.com
2/6
Micro Inverter WVC1200 User Manual
System Function
◆ Power line carrier-current communication(this is optional function,please confirm the spec outside the box first .)
By using electric power as a carrier of AC alternating current, can modulate high-frequency and carrier frequency (60KHz) in AC
wire transmission and can achieve the communication/ newsletter between inverters or between inverter and computer. And it
can transfer the power data . Also monitor all functions of inverter.
.
: :
:
◆ 6-grade power search--- In overcast weather, the PV Panel’s output current is extremely tiny, then inverter will automatic
open 6-grade power search function,and keep outputing efficent and steady during the low power .
◆ Wide voltage input(22-50VDC)--- 1.DC voltage input:22~50VDC; 2.Second level power variable voltage conversion.
◆ High-frequency two-way and one-way grid function--- 1.High frequency direct modulation, AC half wave synthesis;
2.Two-way grid means: Load consume directly. And can reverse AC current transmission.
◆ Kinds of frequency output function--- 1.It can apply to 50Hz and 60Hz frequency of AC; 2.Frequency range: 45Hz ~ 64Hz;
◆Directly connected to the solar panels (do not need to connect the battery)
◆ AC 0 angle with high precision auto-detection--- High-precision analysing the AC phase angle .The phase shift rate is less
than 1%, thus achieve high-precision with phase modulation AC output together.
1.AC phase shift: < 1%; 2.Over-zero protection: 0.2 VAC; 3.AC switching: 50Hz / 60Hz.
◆ Synchronous High-frequency Modulation
1.Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz) ;
2.Synthetic way: MOSFET full-bridge; 3.High frequency: 50KHz.
◆ Pure Sine Wave Output--- Use SPWM directly to make pure sine wave output.
1.Output waveform: Adopt complementary PWM to push-pull pure sine wave; 2.Generate means: enhancement-mode SPWM.
◆ Power Automatically Locked (APL)--- automatically powers locked in maximum power point, made output more stable.
◆ Constant Current, Constant Power--- constant current and output power, without any overload, over-current phenomenon.
◆ Exactly and timely automatic Island Effect Protection
◆ High-Frequency High Conversion Rate--- Adapt high frequency converter, the output more efficient .
◆ Maximum Power Point Tracking (MPPT)--- high-precision (MPPT) operation power, automatic and immediate adjust the solar
panels output power at the maximum output point,made the inverter discharge to power grid with the highest efficiency.
◆ Stack using--- Such as: 4 micro inverter of 260W stacking can achieve 1040W. the number of the stacking is unlimited.
◆ DC input--- Input voltage range: 22V to 50V,PV Panel: Recommend using the power more than 30W and the standard voltage
of 36V PV panels.Suggestion making the PV in parallel.
◆ AC output--- 220VAC: 180V - 262V, 50HZ; 110V AC: 80V - 160V ,60HZ.
Notes:
★Please connect the inverter following the operation instruction show above. If have any question please contact
with relative persons.
★ Non-professionals do not disassemble.Only qualified personnel may repair this product.
★ Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating,and clear
around the inflammable and explosive materials.
★ When using this product, avoid children touching,playing, to avoid electric shock.
★ Connected solar panels, battery or wind generators DC input DC power supply cable.
Accessories for product:
1.One warranty card;
2.One user manual;
3.One certificate of quality;
5.One AC Cable;
LED Display
1.Red light 3 second---Red LED light 3 second while device starts , then in working condition;
2.Green flash fast---MPPT searching;
3.Green flash slow---MPPT + searching;
4. Red flash slow---MPPT - searching;
5.Green lights on 3s and off 0.5s---MPPT locked;
6.Red light steady---a. Islanding protection;b.Over-temperature protection;c.Over / low AC voltage protection;
d. Over / low DC voltage protection; e.Fault
Remarks:
LED flashing in the process of being working condition:inverters connected to AC & DC sides→Red LED light 3 second→Green LED flash fast(MPPT searching)→Green LED flash slow(MPPT + searching) / Red LED flash slow
(MPPT - searching) / reen LED lights on 3s and off 0.5s (MPPT locked) .
KaiDeng Energy Technology Co., Ltd. http://www.kaidengdg.com
3/6
Micro Inverter WVC1200 User Manual
Parameter Table
Item Parameter Value / Description
Iput Data
Maximum input power 4×300Watt
Recommend the use of PV modules 4×300W & Vmp>30V & Voc<50V
Maximum input DC Voltage 54V
Peak power tracking voltage 22-45V
Operating voltage range 17-50V
Min / max starting voltage 22-50V
Maximum DC short-circuit 80A
Maximum input operating current
Output Data
54.4A
@120V @230V
Peak power output 1200Watt 1200Watt
Rated output power 1150Watt 1150Watt
Rated output current 9.58A
5A
Rated voltage range 80-160VAC 180-260VAC
Rated frequency range 57-62.5Hz
47-52.5Hz
Power Factor >99% >99%
Max unit per branch circuit
Output Eifficiency
Static MPPT efficiency
3pcs(Single-phase)
@120V
99.5%
6pcs(Single-phase)
@230V
99.5%
Maximum output efficiency
Night time power consumption
91.2%
<1W
92.5%
<1W
THD
Exterior & Feature
Ambient temperature range
<5%
-40°C to +60°C
<5%
Dimensions (L × W × H)
370mm×305mm×38mm
Weight
2.85kg
Waterproof rating
Cooling
IP65
Self-cooling
Communication Mode
Power transmission mode
Monitoring System
Power Line
Reverse transfer,load priority
Lifetime free
Electromagnetic Compatibility
Grid disturbance
Grid detection
Certificate
EN50081.part1 EN50082.Party1
EN61000-3-2 Safety EN62109
DIN VDE 1026 UL1741
CEC,CE National patent technology
KaiDeng Energy Technology Co., Ltd. http://www.kaidengdg.com
4/6
Micro Inverter WVC1200 User Manual
Installation Of Micro Inver ter
Step1 Installation for fixed the inverter on the PV holder
with the screws attached is as following:
Step2 Connect the two DC terminal of the PV to the inverter,
positive to positive, negative to negative. Show below:
Inverter
®
® PV Panels
Mc4 1-1
Connector
PV Panels
Mc4 1-3
Connector
®
PV Panels
Mc4 1-2
Connector
PV Panels
Mc4 1-4
Connector
Step3 Open the waterproof cap on AC output side of the micro inverter, then plug to AC power line. Show below:
L(brown) N(blue)
®
N
G(yellow)
L
Ac Cable Ac Cable
G
Step4 Plug the AC output line to main AC cable;
Step5 Repeat the first step to the third step to complete the installation of micro inverters;
Step6 Finally, please connect the AC main cable to the utility grid to run renewable energy and saving $$$!
Installation Of Ground Wire
Ground
Wire
KaiDeng Energy Technology Co., Ltd. http://www.kaidengdg.com
5/6
Micro Inverter WVC1200 User Manual
Single-Phase Connection
PV Panel PV Panel PV Panel
( L )
( N )
( G )
L
N
G
Micro
Inverter
Three-Phase Connection
PV Panel
Micro
Inverter
A
B
C
N
G
Meter
Ground
A
B
C
N
G
G
N
L
G
N
L
A
B
C
N
G
G
N
L
G
N
L
KaiDeng Energy Technology Co., Ltd. http://www.kaidengdg.com
6/6
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement