Graco 407066E - InvisiPac Funnel Retrofit Kit Instructions

Add to my manuals
4 Pages

advertisement

Graco 407066E - InvisiPac Funnel Retrofit Kit Instructions | Manualzz

Instructions

InvisiPac

HM25 Tank-Free

Funnel Retrofit Kit

407066E

EN

For installing the air-cooled funnel onto an existing InvisiPac system.

For professional use only.

Not approved for use in explosive atmospheres or hazardous locations.

Kit No. 24T004

1

5

Important Safety Instructions

Read all warnings and instructions in this manual and in the InvisiPac Instructions-Parts manual. Save all instructions.

1

Parts

3

4

5

6

7

Ref Part

1

Description

198177 FITTING, air, 5/32 in. x 1/8-27 npt

2 116504 FITTING, tee

16D939 ADAPTER, 1/4 npt x 1/8 npt

--RESTRICTOR, air

24T004 FUNNEL

598095 TUBE, 5/32 in. OD

C38321 ZIP-TIE

Qty

1

1

1

1

1

1

1

7

6

1

4

3

2

1

WLE

1

Part of base InvisiPac system.

Installation

Installation

The funnel retrofit kit contains a new funnel with a cooling air inlet port, cooling line hardware and tubing, and a new air filter and air filter retainer.

Disassembly (see F IG . 1.)

1. Turn system main power switch OFF .

2.

Shut off the compressed air supplied to the system.

3.

Remove system air inlet filter and ball valve assembly (A) from system air inlet. See F IG . 1.

4.

Remove hose clamp (B) and 1.3 in. diameter hose (C) from old funnel (D). See F IG . 1.

5.

Loosen hose clamp (E) then remove old funnel from system. See F IG . 1.

6.

Discard the old funnel (D).

B C

D

Assembly (see F IG . 2.)

1.

Use PTFE tape to install tee fitting (2) into system air inlet. See F

IG

. 2.

2.

Use PTFE tape to install 1/4 npt to 1/8 npt adapter (3), restrictor (4), and 5/32 in. air fitting (1) into tee fitting (2). See F

IG

. 2.

3.

Install system air inlet filter and ball valve assembly (A) onto tee fitting (2) outlet. See F

IG

. 2.

4.

Install new funnel (5) into system. Use existing hose clamp (E) to secure to air motor bracket. See F

IG

. 2.

5.

Install 1.3 in. diameter hose (C) into new funnel.

Secure with hose clamp (B). See F

IG

. 2.

6.

Connect one end of 5/32 in. air line (6) to the

5/32 in. air fitting (1). See F

IG

. 2.

7.

Connect other end of the 5/32 in. air line (6) to the new funnel (5). See F

IG

. 2.

8.

Use a zip-tie (7) to secure the 5/32 in. air line in place. See F

IG

. 2.

9. Turn system main power switch ON is now ready to use.

. System

E

F IG . 1: Disassembly

2

A ti21508a

407066E

1 B

1

C

1

1 E

5

7

6

Installation

F IG . 2: Assembly

407066E

1

Part of base InvisiPac system.

WLE

1

4

3

2

A 1

3

Graco Extended Warranty

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by

Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT

LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE .

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy

(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT

MANUFACTURED BY GRACO . These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CANADA CUSTOMERS

The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées.

Graco Information

Sealant and Adhesive Dispensing Equipment

For the latest information about Graco products, visit www.graco.com

.

For patent information, see www.graco.com/patents .

TO PLACE AN ORDER, contact your Graco distributor, go to www.graco.com

and select

“Where to Buy” in the top blue bar, or call to find the nearest distributor.

If calling from the US: 800-746-1334

If calling from outside the US: 0-1-330-966-3000

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

2ULJLQDOLQVWUXFWLRQV This manual contains English. MM 407066

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

Copyright 2012, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.

www.graco.com

Revision E, January 2017

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents