Graco 3A5929D, GrindLazer, Parts Owner's Manual

Parts
GrindLazer™
3A5929D
EN
For removal of materials from flat horizontal concrete and asphalt surfaces. For
professional use only.
Models 25M992, 18B306 (China Only) - Forward Cut
GrindLazer HP DC89 G (270 cc / 9 hp)
Models 25M993,18B307 (China Only) - Forward Cut
GrindLazer HP DC1013 G (390 cc / 13 hp)
Models 25M994 - Reverse Up-Cut (Must be used with LineDriver™)
GrindLazer HP DC1021 G (627 cc / 21 hp Electric Start)
Related Manuals:
Models 25N658, 18B305 (China Only) - Forward Cut
Repair - 3A5919
GrindLazer HP DC1013 G DCS (390 cc / 13 hp Electric Start)
Operation - 3A5918
Model 25N659 - Reverse Up-Cut (Must be used with LineDriver™)
LineDriver Operation - 312540
GrindLazer HP DC1021 G DCS (627 cc / 21 hp Electric Start)
LineDriver ES Operation, Repair, Parts - 3A6623
IMPORTANT SAFETY INSTRUCTIONS
Read all warnings and instructions in this manual and in related manuals before using the equipment.
Be familiar with the controls and the proper usage of the equipment. Save all instructions.
25M992 / 25M993
25M994
(Drums, cutters, and
??
25N658
LineDriver™
??
www.graco.com/techsupport
sold separately)
25N659
Parts - 25M992, 25M993, 25M994
Parts - 25M992, 25M993, 25M994
2
3A5929D
Parts List - 25M992, 25M993, 25M994
Parts List - 25M992, 25M993, 25M994
Ref.
19
22
23
32
33
34
35
36
37
39
40
43
44
45
53
54
58
59
60
61
62
63
64
66
73
76
78
79
83
84
85
89
90
91
93
94
96
97
98
99
100
101
102
103
104
105
106
Part
100131
100023
101566
24D170
16C666
123746
16C054
16C055
123613
123664
113962
112960
123906
111040
16C492
100133
123999
109570
801020
24D150
16C667
123681
116780
123984
114982
112825
112405
114648
16C781
114653
115087
119547
24D135
193405
111020
100731
24D544
116935
116913
116833
16C790
16D497
198891
195134
198931
113961
198930
3A5929D
Description
Qty.
2
NUT, full hex
7
WASHER, flat
18
NUT, lock
1
BRACKET, arm, pivot, cage
1
BRACKET, pivot, wheel, rear
2
SCREW, shoulder, socket hd
1
AXLE, pivot, drum, wheel, rear
2
SPACER, wheel, pivot, rear
2
WHEEL
7
SCREW, cap, hex head
3
WASHER, hardened, SAE
6
SCREW, cap, flng HD
2
PIN, cotter, hairpin
15
NUT, lock, insert, nylock, 5/16
1
ADPATER, shaft, height adjustment
3
WASHER, lock
1
SCREW, cap, hex head
9
WASHER, plain
4
NUT, lock, hex
1
ACTUATOR, cutter height, assembly
1
ROD, lock, transport, painted
1
SWIVEL, universal, joint
1
SCREW, hex, HD, flanged
3
PIN, spring
12
SCREW, cap, flng HD
6
SPRING, belleville
3
NUT, lock
3
CAP, dust
4
PLATE, lift, scarifier
6
SCREW, cap, flange head
6
PLUG, tubing
4
NUT, hex, lock, nylon, thin
1
FRAME, rear
1
AXLE
2
WHEEL, pneumatic
1
WASHER
1
HITCH, mount
3
SCREW, cap, flng HD
1
BALL, trailer
1
SWITCH, safety
1
HARNESS, wire
1
ACTUATOR, switch, hitch
1
BRACKET
1
SPACER, ball, guide
1
BEARING
1
SCREW, cap, hex HD
1
ROD, brake
Ref.
109
Part
114956
Description
TERMINAL, wire, tap
(25M992/25M993 only)
127
24C911 BAR, handle
128
112395 SCREW, cap, flng HD
129
16C278 GROMMET, square
130
16C986 SHAFT, adjustment, cutter height
131
115104 BEARING, flange
132
24D072 SHAFT, crank, adjustment
133
24C982 BRACKET, crankshaft
134
24D618 PIN, handle, scarifier
135
194310 LEVER, actuator
136
120151 RETAINER, plug
137
114659 GRIP, handle
138
16C808 PLATE, control
139
16D440 COVER, control
140
117501 SCREW, mach, slot hex wash HD
141
16C789 HARNESS, wire (25M992, 25M993
only)
16C788 HARNESS, wire (25M994 only)
142
24E296 CONTROL, throttle cable
143
109466 NUT, lock, hex
144a 114954 SWITCH, power (25M992, 25M993
only)
144b 123682 SWITCH, power (25M994 only)
145
16D097 SWITCH, safety, tether, terminated
124081 CORD, lanyard, switch safety
148
102547 SCREW, cap, hex HD
150
123816 CABLE
151
16A717 CABLE with spring
166 16D005 LABEL, 16 hp control (25M994 only)
170
16D076 LABEL, scarifier cutter position
173 16C395 LABEL, ISO hazards & prevent
175
16D391 LABEL, brand, grindlazer
233
C19862 NUT, lock, hex
234
124131 SCREW, machine, pan head
235
17W284 METER, tachometer/hour
248
16C486 BRACKET, hitch, mount, painted
249
125626 SCREW, hex head, flanged
250
111194 SCREW, cap, flanged head
251* 116913 BALL, trailer
252* 110947 WASHER, plain
255
17Z210 BRACKET, support, painted
256
110963 SCREW, cap, flange head
Qty.
1
1
4
1
1
2
1
1
1
2
2
2
1
1
9
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
2
1
1
1
1
2
* Sold separately
 Replacement Danger and Warning labels, tags, and cards
are available at no cost.
3
Parts - 25N658, 25N659
Parts - 25N658, 25N659
4
3A5929D
Parts List - 25N658, 25N659
Parts List - 25N658, 25N659
Ref.
Part
16
17
18
19
22
23
24
25
32
33
34
35
36
37
39
40
43
44
45
53
123644
111841
119554
100131
100023
101566
17Z702
17Z701
24D170
16C666
123746
16C054
16C055
123613
123664
113962
112960
123906
111040
17Y791
54
58
59
61
62
64
73
76
78
79
83
84
85
89
90
91
93
94
96
97
98
99
100
101
102
103
104
105
106
109
100133
100060
109570
17Y866
16C667
17Y961
114982
112825
112405
114648
16C781
114653
115087
119547
24D135
193405
111020
100731
24D544
116935
116913
116833
16C790
16D497
198891
195134
198931
113961
198930
114956
3A5929D
Description
Qty.
2
SCREW, shoulder, socket head
2
WASHER, plain 5/8
2
NUT, lock, nylon. thin patern
2
NUT, full hex
7
WASHER, flat
17
NUT, lock
1
SPACER, wheel, pivot, rear, 1.000
1
SPACER, wheel, pivot, rear, 2.650
1
BRACKET, arm, pivot, cage
1
BRACKET, pivot, wheel, rear
2
SCREW, shoulder, socket head
1
AXLE, pivot, drum, wheel
2
SPACER, wheel, pivot, rear
2
WHEEL
7
SCREW, cap, hex head
3
WASHER, hardened, SAE
6
SCREW, cap, flng HD
2
PIN, cotter, hairpin
15
NUT, lock, insert, nylock, 5/16
1
ADAPTER, shaft, DCS, height adjustment
3
WASHER, lock
1
SCREW, cap, hex hd
7
WASHER, plain
1
ACTUATOR, linear, 12V, 2” stroke
1
ROD, lock, transport
2
PIN, clevis
12
SCREW, cap, flng HD
6
SPRING, belleville
3
NUT, lock
3
CAP, dust
4
PLATE, lift, scarifier
8
SCREW, cap, flange head
4
PLUG, tubing
5
NUT, hex, lock, nylon, thin
1
FRAME, rear
1
AXLE
2
WHEEL, pneumatic
1
WASHER
1
HITCH, mount
3
SCREW, cap, flng HD
1
BALL, trailer
1
SWITCH, safety
1
HARNESS, wire
1
ACTUATOR, switch, hitch
1
BRACKET
1
SPACER, ball, guide
1
BEARING
1
SCREW, cap, hex HD
1
ROD, brake
1
TERMINAL, wire, tap
(25N658 only)
Ref.
Part
Description
127
128
135
136
137
138
139
140
141
24C911
112395
194310
120151
114659
17Y792
17Z203
117501
16C789
16C788
142
24E296
143
109466
144
17Z193
145
16D097
124081
148
102547
150
123816
151
16A717
166 16D005
173 17Y699
BAR, handle
SCREW, cap, flng HD
LEVER, actuator
RETAINER, plug
GRIP, handle
PLATE, control
COVER, control
SCREW, mach, slot hex wash HD
HARNESS, wire (25N658 only)
HARNESS, wire (25N659 only)
CONTROL, throttle cable
NUT, lock, hex
SWITCH, power
SWITCH, safety, tether, terminated
CORD, lanyard, switch safety
SCREW, cap, hex HD
CABLE
CABLE with spring
LABEL, 16 hp control (25N659 only)
LABEL, ISO hazards & prevent
(25N658 only)
17Z212 LABEL, ISO, hazards & prevent
(25N659 only)
175
17Y823 LABEL, brand, grindlazer
207
116610 SCREW, machine, phillips, #10
208
115483 NUT, lock
233
C19862 NUT, lock, hex
234
124131 SCREW, machine, pan head
235
17W284 METER, tachometer/hour
244
17Y962 PIN, cotter, bowtie
245
17Y673 SWITCH, rocker, DCS
247* 18A790 CONTROL, assembly, DCS
248
16C486 BRACKET, hitch, mount, painted
249
125626 SCREW, hex head, flanged
250
111194 SCREW, cap, flanged head
251** 116913 BALL, trailer
252** 110947 WASHER, plain
253
17Z192 GROMMET
258
17Z399 LABEL, instructions
259
17Z341 TAPE, foam
260
17Z340 BOOT, toggle
261
112738 GROMMET
262
17Z410 TOOL, wrench, allen, 6mm
266
17Z411 TUBE, corrugated, slit, 5/8” ID
Qty.
1
4
2
2
2
1
1
13
1
1
1
2
1
1
1
1
1
1
1
1
1
1
4
4
2
2
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
* See page 19 for internal parts used in 18A790 DCS Assembly Control.
** Sold separately
 Replacement Danger and Warning labels, tags, and cards
are available at no cost.
5
Parts - 25M992, 25M993, 18B306 (China Only), 18B307 (China Only)
Parts - 25M992, 25M993, 18B306 (China Only), 18B307
(China Only)
6
3A5929D
Parts List - 25M992, 25M993, 18B306 (China Only), 18B307 (China Only)
Parts List - 25M992, 25M993, 18B306 (China Only),
18B307 (China Only)
Ref.
Part
1a
24D185
2
5
6
7
10
11
12
14
15
16
17
18
19
20
21
22
23
26
27
28
32
33
38
39
40
41
46
47
24E291
100052
101213
123770
24E290
123643
16C409
100321
24D168
123644
111841
119554
100131
124258
100004
100023
101566
100022
102040
24D584
24D170
16C666
100018
123664
113962
24D173
123697
16E053
48
49*
801137
24H324
50
51
16C708
16D067
123939
52
123941
123966
123814
18B303
25P298
53
54
16C492
100133
100052
3A5929D
Description
ENCLOSURE, 9 HP and 13 HP
(DC89 / DC1013 only)
BEARING, mount
WASHER, lock
NUT, full, hex
SCREW, cap, hex HD
KIT, bearing, shaft, drive
SCREW, cap, hex HD
SPACER, guard, belt
NUT
PLATE, mount, motor
SCREW, shoulder, socket head
WASHER, plain 5/8
NUT, lock, nylon, thin pattern
NUT, full hex
BOLT, carriage
SCREW, cap, hex HD
WASHER, flat
NUT, lock
SCREW, cap, hex HD
NUT, lock, hex
KIT, brush, scarifier
BRACKET, arm, pivot
BRACKET, pivot, wheel, rear, painted
WASHER, lock, spring
SCREW, cap, hex head
WASHER, hardened, SAE
COVER, cage, drum
PULLEY, sheave, QD, 3V
SPACER, clutch
(DC89/DC1013 only)
KEY, square
CLUTCH, centrifugal
(DC89/DC1013 only)
SPACER, engine (DC1013 only)
SPACER, engine (DC89 only)
SCREW, cap, hex, head (DC1013
only)
SCREW, cap, hex, head (DC89 only)
ENGINE, gasoline, 9 HP
(DC89 only)
ENGINE, gasoline, 13 HP
(DC1013 only)
ENGINE, gasoline, 9 HP
(China Only)
ENGINE, gasoline, 13 HP
(China Only)
ADAPTER, shaft, height, adjustment
WASHER, lock (DC1013 only)
WASHER, lock (DC89 only)
Qty.
1
1
8
8
4
1
3
3
3
1
2
2
2
2
1
2
2
13
9
12
2
1
1
4
7
3
1
1
1
1
1
1
1
1
1
1
1
Ref.
Part
55
56
57
59
60
61
123799
16D410
123811
109570
801020
24D150
62
63
64
65*
66
67
68
73
89
96
112
118
119
126
140
165
171
172
174
176
16C667
123681
116780
124994
123984
16D443
123982
114982
119547
112914
108851
100133
116596
24D075
117501
16D646
16C393
16C394
16C396
17W756
17W755
17W760
17W759
15F354
17W935
128718
177
178
237
238
Description
BUSHING, QD, sheave, pulley
KEY, square
CAP, plug, tube, red, 2 inch
WASHER, plain
NUT, lock
ACTUATOR, cutter height,
assembly
ROD, lock, transport
SWIVEL, universal, joint
SCREW, hex, hd, flanged
BELT, 3VX355
PIN, spring
COVER, dust, bearing
SCREW, cap, hex head
SCREW, cap
NUT, hex, lock, nylon, thin
WASHER
WASHER, plain
WASHER, lock
SCREW, cap, hex head
COVER, belt
SCREW, mach, slot hex wash HD
LABEL, hot surface
LABEL, ISO cut foot icon
LABEL, ISO pinch hazard icon
LABEL, grease equipment 50 hours
LABEL, brand, Grindlazer DC1013
LABEL, brand, Grindlazer DC89
LABEL, brand, Grindlazer DC1013
LABEL, brand, Grindlazer DC89
FUNNEL, oil
FITTING, 1/4” NPTMx1/4”Barb
CAP, Vinyl, 1/4-5/16
Qty.
1
1
1
9
4
1
1
1
5
1
3
2
4
8
1
4
2
2
2
1
5
1
2
2
2
1
1
1
1
1
* KIT includes belt 65
 Replacement Danger and Warning labels, tags, and
cards are available at no cost.
NOTE: Any part that does not call out a specific
GrindLazer model is common to all three non-DCS
GrindLazer models.
1
1
1
1
1
7
Parts - 25M994
Parts - 25M994
8
3A5929D
Parts List - 25M994
Parts List - 25M994
Ref.
1b
2
5
6
7
10
15
16
17
18
32
33
34
35
36
37
38
39
43
44
45
46
47
48
49*
50
51
Part
24D186
24E291
100052
101213
123770
24E290
24D168
123644
111841
119554
24D170
16C666
123746
16C054
16C055
123613
100018
123664
112960
123906
111040
123697
16P716
801137
24H323
16C708
123940
3A5929D
Description
Qty.
1
ENCLOSURE, 21 HP
1
BEARING, mount
8
WASHER, lock
8
NUT, full, hex
4
SCREW, cap, hex HD
1
KIT, bearing, shaft, drive
1
PLATE, mount, motor
2
SCREW, shoulder, socket head
2
WASHER, plain 5/8
2
NUT, lock, nylon, thin pattern
1
BRACKET, arm, pivot
1
BRACKET, pivot, wheel
2
SCREW, shoulder, socket head
1
AXLE, pivot, drum, wheel
2
SPACER, wheel, pivot
2
WHEEL
4
WASHER, lock, spring
7
SCREW, cap, hex head
6
SCREW, cap, flng HD
2
PIN, cotter, hair pin
15
NUT, lock, insert, nylock, 5/16
1
PULLEY, sheave, QD, 3V
1
SPACER, clutch (DC1021 only)
1
KEY, square
1
CLUTCH, centrifugal (DC1021)
1
SPACER, engine (DC1021)
1
SCREW, cap, hex head (DC1021)
Ref.
52
53
54
55
56
65*
67
68
118
119
126
176
177
178
237
238
322
323
324
Part
Description
17W573 ENGINE, gasoline, 21HP
(DC1021)
16C492 ADAPTER, shaft, height
adjustment
100133 WASHER, lock (DC1021 only)
123799 BUSHING, QD, sheave, pulley
16D410 KEY, square
124994 BELT, 3VX355
16D443 COVER, dust, bearing
123982 SCREW, cap, hex head
100133 WASHER, lock
116596 SCREW, cap, hex head
24D075 COVER, belt
17W757 LABEL, brand, Grindlazer
DC1021
17W761 LABEL, brand, Grindlazer
DC1021
15F354 FUNNEL, oil
17W935 FITTING, 1/4” NPTM X 1/4” Barb
128718 CAP, Vinyl, 1/4-5/16
113630 ELBOW
125509 FITTING, nipple
127989 INDICATOR, air filter
Qty.
1
1
1
1
1
1
2
4
2
2
1
1
1
1
1
1
* KIT includes belt 65
NOTE: See the 25M992/25M993 section on pages 6
and 7 for 25M994 parts that are common with
25M992/25M993.
9
Parts - 25N658, 18B305 (China Only)
Parts - 25N658, 18B305 (China Only)
10
3A5929D
Parts List - 25N658, 18B305 (China Only)
Parts List - 25N658, 18B305 (China Only)
Ref.
1a
2
5
6
7
10
11
12
14
15
16
17
18
19
20
21
22
23
26
27
28
32
33
38
39
40
41
46
47
48
49*
50
51
52
54
55
56
57
59
Part
Description
26A772 ENCLOSURE, 9 HP and 13 HP
(25N658 only)
24E291 BEARING, mount
100052 WASHER, lock
101213 NUT, full, hex
123770 SCREW, cap, hex HD
24E290 KIT, bearing, shaft, drive
123643 SCREW, cap, hex HD
16C409 SPACER, guard, belt
100321 NUT
24D168 PLATE, mount, motor
123644 SCREW, shoulder, socket head
111841 WASHER, plain 5/8
119554 NUT, lock, nylon, thin pattern
100131 NUT, full hex
124258 BOLT, carriage
100004 SCREW, cap, hex HD
100023 WASHER, flat
101566 NUT, lock
100022 SCREW, cap, hex HD
102040 NUT, lock, hex
24D584 KIT, brush, scarifier
24D170 BRACKET, arm, pivot
16C666 BRACKET, pivot, wheel, rear,
painted
100018 WASHER, lock, spring
123664 SCREW, cap, hex head
113962 WASHER, hardened, SAE
24D173 COVER, cage, drum
123697 PULLEY, sheave, QD, 3V
16E053 SPACER, clutch
(DC89/DC1013 only)
801137 KEY, square
24H324 CLUTCH, centrifugal
(25N658 only)
16C708 SPACER, engine (25N658 only)
123939 SCREW, cap, hex, head (25N658
only)
17Y714 ENGINE, gasoline, 13 HP
18B304 ENGINE, gasoline, 13 HP (China
Only)
100133 WASHER, lock (25N658 only)
123799 BUSHING, QD, sheave, pulley
16D410 KEY, square
123811 CAP, plug, tube, red, 2 inch
109570 WASHER, plain
3A5929D
Qty.
1
1
8
8
4
1
3
3
3
1
2
2
2
2
1
2
7
17
7
17
2
1
1
4
7
3
1
1
1
Ref.
Part
60
65*
67
68
73
96
112
118
119
126
140
165
171
172
174
801020
124994
16D443
123982
114982
112914
108851
100133
116596
24D075
117501
16D646
16C393
16C394
16C396
176
17Y826
177
178
237
238
17Y828
15F354
17W935
128718
Description
Qty.
3
NUT, lock
1
BELT, 3VX355
2
COVER, dust, bearing
4
SCREW, cap, hex head
8
SCREW, cap
4
WASHER
2
WASHER, plain
2
WASHER, lock
2
SCREW, cap, hex head
1
COVER, belt
5
SCREW, mach, slot hex wash HD
1
LABEL, hot surface
2
LABEL, ISO cut foot icon
2
LABEL, ISO pinch hazard icon
2
LABEL, grease equipment 50
hours
1
LABEL, brand, Grindlazer
DC1013
1
LABEL, brand, Grindlazer 25N658
1
FUNNEL, oil
FITTING, 1/4” NPTMx1/4”Barb
CAP, Vinyl, 1/4-5/16
* KIT includes belt 65
+ Air cleaner element used in Honda Engine Cyclone
air filter system is Honda part number 17210-Z1C-781
 Replacement Danger and Warning labels, tags, and
cards are available at no cost.
NOTE: Any part that does not call out a specific
GrindLazer model is common to both DCS GrindLazer
models.
1
1
1
1
1
1
1
1
1
1
7
11
Parts - 25N659
Parts - 25N659
12
3A5929D
Parts List - 25N659
Parts List - 25N659
Ref.
Part
1
2
5
6
7
10
15
16
17
18
24
26A774
24E291
100052
101213
123770
24E290
24D168
123644
111841
119554
17Z702
25
17Z701
32
33
34
35
36
37
38
39
43
44
45
46
47
48
49*
24D170
16C666
123746
16C054
16C055
123613
100018
123664
112960
123906
111040
123697
16P716
801137
24H323
3A5929D
Description
ENCLOSURE, 21 HP
BEARING, mount
WASHER, lock
NUT, full, hex
SCREW, cap, hex HD
KIT, bearing, shaft, drive
PLATE, mount, motor
SCREW, shoulder, socket head
WASHER, plain 5/8
NUT, lock, nylon, thin pattern
SPACER, wheel, pivot, rear,
1.000
SPACER, wheel, pivot, rear,
2.650
BRACKET, arm, pivot
BRACKET, pivot, wheel
SCREW, shoulder, socket head
AXLE, pivot, drum, wheel
SPACER, wheel, pivot
WHEEL
WASHER, lock, spring
SCREW, cap, hex head
SCREW, cap, flng HD
PIN, cotter, hair pin
NUT, lock, insert, nylock, 5/16
PULLEY, sheave, QD, 3V
SPACER, clutch (25N659 only)
KEY, square
CLUTCH, centrifugal (25N659
only)
Qty.
1
1
8
8
4
1
1
2
2
2
1
1
1
1
2
1
2
2
4
7
6
2
15
1
1
1
1
Ref.
Part
50
51
16C708
123940
52
17W573
53
54
55
56
65*
67
68
118
119
126
176
177
178
237
238
322
323
324
17Y791
100133
123799
16D410
124994
16D443
123982
100133
116596
24D075
17Y827
17Y829
15F354
17W935
128718
113630
125509
127989
Description
Qty.
1
SPACER, engine (25N659 only)
1
SCREW, cap, hex head (25N659
only)
1
ENGINE, gasoline, 21HP
(25N659 only)
1
ADAPTER, shaft, DCS
1
WASHER, lock (25N659 only)
1
BUSHING, QD, sheave, pulley
1
KEY, square
1
BELT, 3VX355
2
COVER, dust, bearing
4
SCREW, cap, hex head
2
WASHER, lock
2
SCREW, cap, hex head
1
COVER, belt
1
LABEL, brand, Grindlazer 25N659
LABEL, brand, Grindlazer 25N659
FUNNEL, oil
FITTING, 1/4” NPTM X 1/4” Barb
CAP, Vinyl, 1/4-5/16
ELBOW
FITTING, nipple
INDICATOR, air filter
1
1
1
1
* KIT includes belt 65
NOTE: See the 25N658 section on pages 10 and 11 for
25N659 parts that are common with 25N658.
13
Parts - 25M992, 25M993
Parts - 25M992, 25M993
14
3A5929D
Parts List - 25M992, 25M993
Parts List - 25M992, 25M993
Ref.
4
23
45
64
70
71
71a
71b*
71d
71f
71g
71h
71j
71k
71m
71p
71r
71s*
71t
71w
71x
71y
71z
72
73
74
75
76
Part
112914
101566
111040
116780
24D184
24H246
17H485
15G952
193528
193662
17H486
15J603
108483
110754
112405
119563
113484
113485
113962
114548
114648
114681
120476
240991
114666
114549
193658
112825
3A5929D
Description
WASHER, plain
NUT, lock
NUT, lock, insert, nylock, 5/16
SCREW, hex, HD, flanged
FRAME, front
CASTER, LineLazer
SHAFT, fork
BRACKET
ARM, detent
STOP, wedge
DISK, adjuster
WASHER
SCREW, shoulder, sch
SCREW, cap
NUT, lock
SPRING, belleville
SEAL
BEARING
WASHER
BEARING, bronze
CAP, dust
SCREW
BOLT
BRACKET, caster, front
SCREW, cap, flng HD
WHEEL, pneumatic
SPACER, seal
SPRING, belleville
Qty.
2
6
4
4
1
1
1
1
1
1
1
1
1
2
4
2
1
2
1
2
3
1
1
1
2
1
2
2
Ref.
Part
77
78
83
84
85
86
87
150
217
218
219
220
221
222
113471
112405
16C781
114653
115087
114682
114802
123816
17W802
110005
100527
17W807
801972
16U697
223
224
225
226
227
228
229
230
231
15F366
107068
100016
100011
801958
801959
113951
125073
115753
Description
Qty.
1
SCREW, cap, hex HD
3
NUT, lock
2
PLATE, lift, scarifier
4
SCREW, cap, flange head
2
PLUG, tubing
1
SPRING, compression
1
STOP, wire
1
CABLE
1
LABEL, grindlazer, electric start
1
NUT, jam, hex
1
WASHER, plain
1
BOX, battery, grindlazer, painted
1
PAD, battery
1
BRACKET, mounting, battery,
painted
1
PAD, foam, 6 in.
2
HOOK, bolt
2
WASHER, lock
2
NUT, wing
1
PROTECTOR, terminal, red
1
TERMINAL, protector, black
1
CABLE, electric, neg
1
CABLE, electric, battery, positive
1
BATTERY, 33ah, sealed
* Included in Bracket Repair Kit 240940.
15
Parts - 25M994, 25N658, 25N659
Parts - 25M994, 25N658, 25N659
16
3A5929D
Parts List - 25M994, 25N658, 25N659
Parts List - 25M994, 25N658, 25N659
Ref.
4
23
45
64
70
71
71a
71b*
71d
71f
71g
71h
71j
71k
71m
71p
71r
71s*
71t
71w
71x
71y
71z
72
73
74
75
76
77
78
83
Part
112914
101566
111040
116780
24D184
24H246
17H485
15G952
193528
193662
17H486
15J603
108483
110754
112405
119563
113484
113485
113962
114548
114648
114681
120476
240991
114982
114549
193658
112825
113471
112405
16C781
3A5929D
Description
WASHER, plain
NUT, lock
NUT, lock, insert, nylock, 5/16
SCREW, hex, HD, flanged
FRAME, front
CASTER, LineLazer
SHAFT, fork
BRACKET
ARM, detent
STOP, wedge
DISK, adjuster
WASHER
SCREW, shoulder, sch
SCREW, cap
NUT, lock
SPRING, belleville
SEAL
BEARING
WASHER
BEARING, bronze
CAP, dust
SCREW
BOLT
BRACKET, caster, front
SCREW, cap, flng HD
WHEEL, pneumatic
SPACER, seal
SPRING, belleville
SCREW, cap, hex HD
NUT, lock
PLATE, lift, scarifier
Qty.
2
6
8
4
1
1
1
1
1
1
1
1
1
2
4
2
1
2
1
2
3
1
1
1
2
1
2
2
1
3
2
Ref.
Part
84
85
86
87
150
218
219
220
221
222
223
114653
115087
114682
114802
123816
110005
100527
17Z722
17Z660
17Z719
18A547
224
225
227
228
229
17Z720
17Z663
801958
801959
230
231
232
263
264
Description
Qty.
4
SCREW, cap, flange head
2
PLUG, tubing
1
SPRING, compression
1
STOP, wire
1
CABLE
1
NUT, jam, hex
1
WASHER, plain
1
BOX, battery, grindlazer, painted
1
PAD, battery
1
TRAY, battery, painted
4
FASTENER, BHCS, 5/16-18 x
.375
4
DAMPENER, dia 1.00”
1
STRAP, velcro, 2” wide
1
PROTECTOR, terminal, red
1
PROTECTOR, terminal, black
1
CABLE, electric, negative
113951 25M994, 25N659 Models
17Y958 25N658 Model
CABLE, electric, positive
125073 25M994, 25N659 Models
17Y960 25N658 Model
115753 BATTERY, 33ah, sealed
100021 SCREW, cap, hex head (25N658
only)
17Z342 FUSE, 20A (25N658, 25N659
only)
17Z381 HARNESS, wire, power, DCS HP
(25N658, 25N659 only)
1
1
2
1
1
* Included in Bracket Repair Kit 240940.
17
Parts - 24M994, 25N659
Parts - 24M994, 25N659
Parts List
Ref.
199
300
301
302
303
304
305
306
307
308
309
310
18
Part
17Z689
17C978
17C989
17C988
16G754
17D030
17D029
17D021
103547
110755
102040
17C979
Description
FOAM, urethane, 3/16”
KIT, fuel tank, 2 gallon
CAP, fuel
PICK UP FUEL
GROMMET
GROMMET
VALVE, fuel
STRAP, mounting
SCREW
WASHER
NUT
CART, carbon
Qty.
2
1
1
1
1
1
1
1
4
4
4
1
Ref.
311
312
313
314
315
316
317
318
319
320
321
Part
16G756
116610
16G758
115483
112774
17D019
17C983
17C984
17C985
16G757
16G162
Description
STRAP
SCREW
BRACKET
NUT
SCREW
BRACKET
HOSE, 1/4” 19 in.
HOSE, 3/6” 21 in.
HOSE, 3/16” 14 in.
CLAMP, hose 1/4
CLAMP, hose 3/16
Qty.
2
2
2
2
1
1
1
1
2
2
5
3A5929D
DCS Control Box 18A790
DCS Control Box 18A790
25N658 & 25N659 only
Parts List
Ref.
Part
300
18A690
301
302
303
17Y686
18A691
18A692
3A5929D
Description
Qty.
1
KIT, DCS Control Box, machined
includes 300a - 300f
1
LABEL, control, GrindLazer DCS
1
KIT, potted DCS Control PCB
1
KIT, display board, DCS control
Ref.
304
305
306
307
308
Part
18A693
18A694
18A695
18A696
18A697
Description
KIT, home button, DCS
KIT, zero button, DCS
KIT, cut cutton, DCS
KIT, up button, DCS
KIT, down button, DCS
Qty.
1
1
1
1
1
19
Wiring Diagram
Wiring Diagram
DCS System
20
3A5929D
Wiring Diagram
DCS Control Box Wiring Diagram
Powers Display
3A5929D
21
Drum and Cutter Parts
Drum and Cutter Parts
Diamond Drum Parts
Diamond Drum Parts List
209
210
211
212
213
Ref.
Part
Description
Qty.




2
1
1
209 16A259 CAP, end, threaded
210 16A257 SPACER, 1/4 in.
211 16A258 SPACER, 1/8 in.
212 24E289 BLADE, diamond
213 123252 SQUARE KEY
214 24D982 DRUM
215 16E065 WRENCH, spanner
 Quantities will vary. See chart below.
Flail-Type Drum Parts
Visit www.graco.com/drumassembly for instructions on
how to assemble various drum configurations.
214
215
ti25381b
Diamond Blades
Applications: Specifically used to inlay and groove
concrete and asphalt pavement
1/8 in.
Blade
Spacers
1/4 in.
End
Spacers
Square
Key
30
204
21
2
42
132
2
2
Ref.
Part
Description
Cut Width
Blades
212
24E289
Replacement Diamond Blade
1/4 in. / 6.35 cm
1
24B965
Completely assembled drum for
pavement grooving/inlay
5 in. / 12.75 cm
24D583
Completely assembled drum for
pavement grooving/inlay
10 in. / 25.5 cm
22
3A5929D
Graco Standard Warranty
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs
will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite
de ou en rapport, directement ou indirectement, avec les procédures concernées.
3A5929D
23
Graco Information
For the latest information about Graco products, visit www.graco.com.
For patent information, see www.graco.com/patents.
TO PLACE AN ORDER, contact your Graco distributor or call 1-800-690-2894 to identify the nearest distributor.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 3A5929
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2018, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revision D, April 2020

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project