PROAPPLIANCES
MAKE ANY THING POSSIBLE
JUICE
WHOLE FRUIT PRO
COLD PRESS JUICER
INSTALLATION 8% OPERATION
INSTRUCTIONS
PRO-WFJP-R
WWW.PROAPPLIANCES.COM.AU
JUICE
PRO
Congratulations on your purchase
of a JuicePro Whole Fruit Juicer
Note: Please read through the instructions carefully before using or installing the product and ensure that the
manual is kept in a safe place for future reference.
The system must be properly installed and located in accordance with the installation instructions before it is used.
During the set up of this product if you have any questions/ comments/ issues
DO NOT RETURN TO STORE FOR SERVICE AND TECHNICAL ADVICE ON THIS PRODUCT FREE CALL 1300 764 325
CUSTOMER CARE: 1300 764 325
Aquaport Corporation Pty Ltd
66-70 Hardys Road
. Electrical Requirements:
Torrensville SA 5031 , Australia / New Zealand 240V / 230V 50Hz
Telephone: 08 8354 0711 E] / proappliances Due to manufacturing alterations product may
www.proappliances.com.au Y Eproappliancesau vary slightly from that pictured.
OPERATION CONDITIONS & SAFETY PRECAUTIONS
All components need to be installed in accordance with the
user manual instructions for correct performance of unit.
Read all instructions carefully before operation of the unit.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure they do not play with
the appliance.
Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
To protect against risk electric shock and personal injury, do not
immerse cord, plugs, or appliance in water or other liquids.
Fully unwind the power cord before use. Connect only to
220V/240V power outlet.
This appliance should be used in conjunction
with a safety switch.
If an extension cord is used with this unit, the extension cord
must have a rating equal to the rating of this appliance.
Unplug the power cord when not in use.
INSTALLATION AND OPERATING INSTRUCTIONS 1
JUICE
PRO
e Do not use attachments not recommended or sold by the SYSTEM SPECIFICATIONS
manufacturer as it may lead to fire, electric shock or injury.
System
e Position the appliance at a minimum distance of 20cm away Specifications PRO-WFJP-R
from walls, curtains and other appliances and provide adequate Voltage 220-240V
space above and on all sides for air circulation.
Power 240W
* The product is for indoor, normal household use only.
Frequency 50Hz
* Do not use appliance for other than intended purpose.
e Operate unit on a stable level flat surface. Ensure surface
is clean and free from water etc.
* Do not place the unit near the edge of a bench or table
during operation.
* Always ensure you switch the juicer to the off position and the
motor has stopped completely before disassembling.
e Avoid contact with moving parts.
e Do not put your fingers or foreign objects into the juicer while
it is in operation. If food becomes lodged in the inlet, use the
pusher to push it down, or use the reverse button to dislodge.
If this is not possible, turn juicer off and wait for motor to
completely stop before disassembling juicer to remove food.
* Do not use the appliance if any part is damaged.
2 INSTALLATION AND OPERATING INSTRUCTIONS
INSTALLATION & OPERATING INSTRUCTIONS
A. Component identification & content check list:
PRO-WFIJP-R - JuicePro Whole Fruit Cold Press Juicer
Ref Description Qty
Main Components
Pusher
Hopper
Squeezing screw
Strainer
Spinning Brush
Bowl
Juice cap
Base
Jug
Cleaning Brush
Frozen Dessert Strainer
Juice Outlet
Pulp Outlet
<= г ^^ — — К @а п по о >
вн юн
INSTALLATION AND OPERATING INSTRUCTIONS 3
JUICE
PRO
B. ASSEMBLY INSTRUCTIONS
Note: Wash the parts before first use
Important: Prior to assembling the juicer please check this point:
At the base of the bowl there is a rubber stopper. When in place
the stopper ensures all of the juice only exits via the juice outlet.
Before juicing always ensure that the rubber stopper is firmly in
place. See figure 1
»
bber E y 7
| ee и
ЦА ; a = A =
A €
У
ee
1. Place the bowl on the base so that the arrow on the bowl lines
up with the arrow on the base.
2. Insert the strainer into the spinning brush then place this
assembly (strainer + spinning brush) into the bowl
ensuring the dot on the strainer
is aligned with the dot on the
bowl. When the dots are correctly
aligned, the assembly will lock in
to place. See figure 2
4 INSTALLATION AND OPERATING INSTRUCTIONS
3. Insert the squeezing screw into the strainer and turn slowly
until it clicks into position. See figure 3.
4. Place the hopper onto the juicing bowl aligning the dot on
the hopper with the dot on the bowl. Turn clockwise until the
lid is secure.
Note: It may help to insert the stainless steel rod located at the
top of the squeezing screw into the hole on the underside of the
hopper first, then align dots and turn to close.
Note: Unit will not operate if not assembled correctly.
C. OPERATING INSTRUCTIONS:
Warning: Do not operate the juicer with wet hands as it may cause
an electric shock.
Important: To protect the motor and provide you with a long lasting
machine the Juice Pro has an auto shut down feature. If the
components are not installed correctly, the motor overheats due
to extended juicing or the strainer becomes clogged with food the
machine will automatically shut down. This is normal and prevents
damage to your Juice Pro. If this happens switch the machine off.
Check components are correctly installed and that there is no food
caught in the strainer. Wait 15 minutes for the motor to cool then
recommence normal operation.
Tips on Operation
e Do not operate the juicer prior to inserting ingredients.
e Do not operate for more than 15 minutes at one time.
This can cause the motor to overheat.
Note: The unit has an auto shutdown feature if overheating occurs. Wait
15 minutes for the motor to cool then recommence normal operation.
e Do not put fingers or other objects into the hopper.
Always use the provided Pusher when needed.
e Do not put hard materials, including pips, ice, hard skin or
ingredients with little or no juice content e.g. bananas into the juicer.
1. Prepare the material you wish to juice. Please read pages 8 and
11 “Getting started with your Juice Pro” for further tips on juicing.
2. Plug in the JuicePro and turn on at wall socket.
3. Place a jug below the juice outlet and a jug below the pulp outlet
4. Switch the power button to ON.
Note: The juicer power button has 3 ON a
positions. See figure 4. 5 e A or
a. ON: This starts the motor and
REV - Mim
juicing process.
b. OFF: IS the central position of the button. It switches off the appliance.
c. REVERSE: Pushes the ingredients back up to dislodge them.
Only use this function when something is stuck in the juicer
and it needs to be unclogged.
5. Insert the prepared ingredients into the hopper one piece at a time.
e Insert slowly one piece at a time and allow juicer time to work.
e Do not overstuff the hopper or force food in. The pusher is
only to be used if food becomes stuck.
Tip: Juice with the juice outlet cap closed to create various mixed juices.
6. When you are finished and the juice and pulp are completely
extracted, switch the power button to off (central position of
the power button).
Tip: If you are making multiple juices in one session to avoid
crossover of flavours, pour water into the hopper between drinks
to clean the unit. Capture rinsing water in a separate bowl so as
not to dilute your juice. Depending on the material being juiced you
may need to clear some pulp from the strainer.
INSTALLATION AND OPERATING INSTRUCTIONS 5
JUICE
PRO
HOW TO USE THE FROZEN DESSERT STRAINER
1. Place the bowl on the base so that the arrow lines up
with the arrow on the base.
2. Insert the frozen dessert strainer into the bowl, ensuring
the dot on the strainer is aligned with the dot on the bowl.
When the dots are correctly aligned, the assembly will lock
into place.
3. Insert the squeezing screw into the strainer turn slowly
until it clicks into position.
4. Place the hopper onto the bowl by aligning the dots on the
hopper and the bowl. Then, rotate clockwise until the hopper
is secured.
Note:
e When using the frozen dessert strainer, always leave the juice
outlet cap open.
* The frozen dessert/sorbet will come out of the pulp outlet.
Important: The frozen dessert strainer is to be only used with
frozen ingredients. Depending on the different ingredients, allow
the frozen items to thaw for 5-20 minutes before use. Slowly
process a small amount per batch.
6 INSTALLATION AND OPERATING INSTRUCTIONS
D. IF THE JUICER BECOMES CLOGGED,
INOPERABLE OR STOPS DURING OPERATION
1. Switch the button to OFF position then press and hold the
REVERSE button for 2-3 seconds and release. Repeat until the
ingredients become dislodged.
Note: Let the juicer stop completely before using the
REVERSE BUTTON to prevent malfunction.
2. If the juicer does not work after these steps, turn off the
machine and switch off at the power point. Disassemble the
juicer to dislodge any material then reassemble as per the
instructions and try again.
E. HOW TO DISASSEMBLE AND CLEAN THE UNIT: Cleaning Tips:
1. Switch off the unit and unplug the power cord from ¢ Periodically remove the silicone brushes from the spinning brush
the wall outlet. and clean thoroughly before reassembling.
2. Twist the hopper anti clockwise then lift off. Lift the bowl e Thoroughly clean immediately after each use to minimise
straight up to remove from the base. staining
3. Disassemble the parts from the bowl in the order shown e Pull out the rubber stopper on the base of the bowl to clean bowl
to the diagram. See Figure 5. effectively. Always ensure the rubber stopper is re-inserted prior
to juicing otherwise it may cause a leak.
* Do not use harsh abrasives or chemicals to clean the juicer.
* Do not clean in the dish washer.
4. Use the brush to clean all of these parts thoroughly in warm
soapy water then dry thoroughly. Ensure the pulp outlet on
the bowl is clear (the end of the cleaning brush is designed to
clear trapped material from the pulp outlet). Unplug the rubber
stopper for easier access to the pulp outlet.
Caution: Before juicing ensure the rubber stopper is firmly in
place. See Fig 1, Page 4.
5. Use a damp cloth to wipe down the base of the unit.
INSTALLATION AND OPERATING INSTRUCTIONS 7
JUICE
PRO
GETTING STARTED WITH YOUR JUICEPRO
Juicing is a fun and easy way to enjoy fruit and vegetables.
The different taste combinations are endless and only limited by
your imagination!
The JuicePro Whole Fruit Cold Press Juicer is not a conventional
juicer and therefore cannot be used in the same way.
Take the time to get to know the mechanics of your juicer and how
it works best, to do this we suggest you start with easy to juice
items, soft fruits and vegetables like oranges, and work up to
experimenting with different foods and flavour combinations.
8 INSTALLATION AND OPERATING INSTRUCTIONS
Preparing Fruits and Vegetables
The wide whole fruit chute helps cut down time consuming and
messy food preparation. The below tips will also assist you to
quickly and easily prepare for juicing.
- Always ensure fruits and vegetables are washed and patted dry
with a towel prior to juicing.
- Peel off any inedible skin, remove stems and hard seeds.
- If the ingredient does not fit easily into the feeding tube cut into
pieces that will fit.
- Long or fibrous materials such as celery or spinach should be
cut into lengths no longer than 10cm as the fibres can wrap
around the squeezing screw and damage the unit.
- Hard materials such as carrots will take longer to process, we
suggest you soak in cold water first or cut to a smaller size.
DO NOT put the following ingredients into your JuicePro.
- Hard or inedible skins (orange, pineapple, mango, melon etc.)
must be removed before juicing.
- Hard seeds (stone fruits, mango, etc) must be removed before juicing.
- Ice or Frozen fruits. Unless you are using the frozen dessert
strainer, completely thaw ingredients before juicing. Do not use ice.
- Ingredients with little water content (bananas, coconut etc)
cannot be juiced.
Ingredient Type and Juicing Speed
The size and type of ingredient and the speed at which you feed it into
your:juicer is very important in achieving good results. To familiarise
yourself with the process we recommend you start with easy to juice
soft materials with high water content such as citrus fruits.
(Remember to always remove the peel first!).
Feed the material into the hopper slowly, allowing the JuicePro
to fully extract the juice before moving onto the next piece. Work
at a pace that will allow the juicer time to work and process the
material before adding more.
Harder materials will have a longer extracting time, use the pusher
gently if needed but never force material into the JuicePro.
To assist with processing hard materials we suggest you alternate
then with a material that is high in water content such as apple
or orange. Through use of your JuicePro you will soon familiarise
yourself with the right feeding speed and material size.
Time to Experiment
Once you are confident in using your juicer get creative and
experiment, who knows you may just invent a new flavour!
Here are a few ideas to get you started:
You can try all sorts of fruit / vegetable combinations - don’t
forget to try adding beetroot, cucumber, broccoli, berries or
tomatoes to name a few.
Juice leafy greens such as spinach or wheat grass.
(See page 11 for juicing for leafy greens.)
Try adding fennel for an aniseed flavour.
To get a nice kick add a small amount of Ginger or Garlic.
Make an almond or soy milk. (See page 11 for Soy & Nut milks)
INSTALLATION AND OPERATING INSTRUCTIONS 9
JUICE
PRO
Quick Tips
Refrigerate ingredients before juicing to maximise taste and
juice yield.
Close the juice outlet cap when juicing a mix of ingredients, it
will help the different ingredients to combine and produce a
smoother tasting juice.
Banana's won't juice! Just make your juice minus the
banana then pop juice and banana in a blender to make a
tasty smoothie.
Clean the juicer immediately after juicing to minimise staining.
If you are making multiple juices in one session avoid flavour
cross over by pouring water into the hopper between juices
to rinse the unit. Ensure that rinsing water is captured in a
separate bowl so as not to dilute your juice.
10 INSTALLATION AND OPERATING INSTRUCTIONS
Tips for using the Drip Free Cap
If you are juicing different ingredients keep the drip free cap
closed as it will allow the juices to properly mix and provide a
smoother, nicer taste.
If the drip free cap is closed make sure that you do not let
the juice level in the bowl exceed its capacity otherwise it will
overflow and may damage your unit.
To prevent drips after you have finished juicing close the drip
free cap, especially when you are disassembling the unit.
If you are making several juices, quickly and easily clean out
the JuicePro between each one by pouring some water into the
machine with the drip free cap closed. Open the drip free cap
and discard the water before starting the next juice.
Leave the drip free cap open when using the
frozen dessert strainer.
Juicing Leafy Greens
Leaves are more difficult to process and may take some practice
to get used to. The best way to feed them into the hopper is to roll
them into small tight parcels before feeding into the hopper.
Wet leaves will not process as well as dry leaves so after you have
washed them pat dry with a towel. For the best results we suggest
you juice leaves with other fruits or vegetables and alternate
between feeding leaves and the other material into the hopper.
It’s best not to finish the juicing with leaves as some may remain
in the machine.
Fibrous or thick materials like celery should always be cut into
short lengths as the fibres can wrap around the squeezing screw
and cause your juicer to stop working.
Making Soy and Nut Milks
Soy beans need to be boiled before being juiced. Slowly feed equal
parts of soy beans and water (you can utilise the water used to
boil the soy beans if you wish) into the hopper. The soy milk can be
run through the Juice Pro a second time to further refine it.
To make nut milk only use raw nuts that have been soaked in
water overnight and rinsed thoroughly. Simultaneously feed
nuts with some water into the hopper, the nut to water ratio
will determine how creamy the milk is. Try juicing raw almonds,
walnuts, brazil nuts alone or in combination.
INSTALLATION AND OPERATING INSTRUCTIONS 11
JUICE
PRO
TROUBLE SHOOTING
BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST.
Problem
No power to juicer.
Motor has stopped.
Leaking from beneath the
bowl.
Stain on the bowl, strainer,
spinning brush.
Squeaking noise during
operation.
Damage to the strainer.
12 INSTALLATION AND OPERATING INSTRUCTIONS
Possible Causes
Juicer not plugged in.
Incorrect assembly.
Bowl has been overfilled with material.
Overuse has caused the motor to shut
down as a precaution to overheating.
Rubber plug on base of bowl not correctly
inserted.
A small amount of residual juice is normal.
Natural colour from juicing materials.
Juicing noise from squeezing screw.
Frozen foods, ice, pips, seeds, unknown
substance or too much material in the bowl.
What To Do
Check the juicer is plugged in.
Reassemble the juicer according to the instructions.
Press the reverse power button to try and clear the clog.
May need to be try this a few times.
Switch off and let the motor cool before using again.
Rubber plug on base of bowl not correctly inserted.
It is normal to find a small amount of juice, clean from
the appliance with damp cloth.
This is perfectly normal. To reduce discolouration
ensure you rinse and clean the appliance immediately
after use.
This is perfectly normal. Ensure you do not overload
the juicer.
Ensure you read the instructions carefully on the correct
use of the juicer. Do not overfill the juicer.
Your Aquaport 12 Month
Repair or Replacement Warranty
Aquaport offers a 12 month repair or replacement warranty on
this product with a 3 year repair or replacement warranty on
the motor only.
Aquaport warrants this appliance to the first purchaser and
subject to the stated conditions:
Warranty covers any defects in material or workmanship in the
manufactured product within the first twelve months from date
of purchase.
To make a warranty claim you must call Aquaport on toll free
number 1300 764 325 for instructions.
Product will be repaired or replaced at our discretion. Repair or
replacement costs will be covered under warranty by Aguaport.
Goods presented for repair may be replaced by refurbished goods
of the same type rather then being repaired. Refurbished parts
may be used for the repair of goods.
The benefits given to you by this warranty are in addition to other
rights and remedies of the consumer law in relation to the goods
or services to which this warranty relates.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if
goods fail to acceptable quality and the failure does not amount to
a major failure.
Conditions of this warranty:
1.
This product has been fully installed in accordance with the
user manual installation instructions.
. The warranty extends only to repairing or replacing any
component that proves to be defective in material or
workmanship.
. The warranty does not cover defects occasioned by misuse,
alterations, and accidents or used for other than the intended
purpose.
. The warranty does not cover damage to the product caused by
accident, fire or floods.
5. Proof of purchase is required for warranty claims.
6. This unit is for household use only and warranty is not extended
to units used for commercial purposes
Please keep purchase receipt in a safe place
Customer Care 1300 764 325
Aquaport Corporation Pty Ltd
66 — 70 Hardys Road, Torrensville SA 5031
Phone (08) 8354 0711
INSTALLATION AND OPERATING INSTRUCTIONS 13
WHOLE FRUIT PRO
COLD PRESS JUICER
CUSTOMER HOTLINE: 1300 764 325
Aquaport Corporation Pty Ltd
66-70 Hardys Road, Torrensville SA 5031
Phone: 08 8354 0711
Facsimile: 08 8354 0722
Email: [email protected]
www.proappliances.com.au
El/proappliances
Y Eproappliancesau
">
