Dee Zee DZ371299 4" Oval UltraBlack Nerf Bars Instructions
Dee Zee DZ371293 90-degree Bent End Sidebars are designed to provide a sturdy and convenient step up into your vehicle. Made from high-quality materials, these sidebars are built to last and can withstand the elements. They feature a non-slip step pad for added safety and comfort. Installation is relatively easy and can be completed in a few hours with basic tools. These sidebars are compatible with 2004-2008 Ford F-150 Super Cab models (excluding 2004 Heritage models).
Advertisement
Advertisement
1-800-779-2102
Mon – Thurs: 8:00am - 5:00pm | Friday: 8:00am - 4:00pm CST
INSPECT YOUR PRODUCT FOR DAMAGE & MISSING
PARTS BEFORE PROCEEDING TO INSTALLATION
PROCEDURE FOR RETURNS OR MISSING HARDWARE
-PLEASE CONTACT THE ORIGINAL POINT OF PURCHASE FOR:
SHIPPING DAMAGE, RETURNS, OR WARRANTY CLAIMS
-CONTACT DEE ZEE DIRECTLY FOR MISSING PARTS OR HARDWARE
WWW.DEEZEE.COM
REGISTER YOUR PRODUCT ONLINE: www.deezee.com/registration
VIEW INSTRUCTIONS ONLINE: www.deezee.com/instructions
Operating, servicing, and maintaining a passenger vehicle can expose you to chemicals such as lead, phthalates, engine exhaust, and carbon monoxide that are known to the State of California cause cancer and birth defects or other reproductive harm. To minimize exposure, service your vehicle and its accessories in a well-vented area and wear gloves or wash your hands frequently.
DEE ZEE, INC. WARRANTY AGREEMENT
Dee Zee, Inc. guarantees the original purchaser a limited lifetime warranty against manufacturer defects in materials, workmanship, and design under normal use, excluding damage resulting from road hazards such as gravel or other debris, product misuse, improper installation, impairments from accidents, product modifications, improper repairs, spills, vandalism, product neglect, or acts of God.
This warranty applies only to the original purchaser of new product(s) and is limited to the replacement of genuine Dee Zee products. Modification of any kind to Dee Zee products voids all warranty coverage. Warranty does not include electrical components, installation, cost of removal, labor, transportation costs, loss of use, inconvenience, or consequential damages.
WARRANTY COVERAGE - MATERIALS & WORKMANSHIP
LIMITED LIFETIME WARRANTY :
• STAINLESS STEEL : Side Steps, Grill Guards, Bull Bars, Bed Caps, and Side Rails
• ALUMINUM : Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Bed Protection, Side Rails, Invis-A-Racks, and
Cab Racks
• PLASTIC : Storage Boxes
• OTHER : Front and Rear Bumpers
THREE-YEAR WARRANTY :
• POWDER-COATED / E-COATED STEEL : Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Cab Racks, Sport Bar
Ladder Racks, Cargo Carriers, Mounting Brackets (NX, Rough Step, and Bumper Guards only)
• OTHER : Tailgate Assist, Bed Mats, Floor Mats, Auxiliary Fuel Connection Kits, and All Products Not Otherwise Listed
Individually
WARRANTY COVERAGE – FINISH PROTECTION
The finish of all Dee Zee products is covered for one-year (1) from the date of purchase. Dee Zee products have a high quality finish that must be cared for and maintained like any other exposed finish on the vehicle. Protect the finish with non-abrasive automotive wax (e.g. Pure Carnauba) on a regular basis. Applying soaps, polishes, or waxes that contain an abrasive compound may scratch the finish and leave the exposed material susceptible to corrosion.
WARRANTY COVERAGE – COMPONENT PARTS
Operational items such as shocks, latches, hinges, and wear items including, but not limited to, mud flaps, step pads, toolbox tray, end caps, hardware, seals, etc. have a one-year (1) warranty. Replacement component parts can be ordered via credit card
(MasterCard or VISA) by calling 1-800-779-2102. All replacement parts are non-returnable and non-refundable.
GPI® FUEL PUMPS & ACCESSORIES
All Great Plains Industries (GPI) products, including transfer tank pumps and fuel meters are covered by GPI’s warranty policies.
Dee Zee’s warranty terms do not apply to GPI products. To submit a warranty claim, please contact GPI at 1-800-835-0113 or visit www.gpi.net
.
WARRANTY SUBMISSION PROCEDURE
All warranty claims will be initiated at the place of purchase. The original purchaser will be required to present the original sales receipt with purchase date shown and provide photographs of the defect.
In the event the originally purchased product style is no longer available, Dee Zee will warranty the defective part with a current equivalent. If a comparable product is no longer available, the product would be returned to the store of purchase for a refund or the applicable cost difference can be paid to choose an alternate style.
DISCLAIMER
All products are sold as appearance accessories and should not be relied upon as protection for the vehicle or its occupants in the event of an accident. Vehicles equipped with a supplemental restraints system (air bags) deployed by impact and collision avoidance systems should not be modified in any way. Always consult the vehicle manufacturer if you have any questions regarding supplemental restraint systems and sensors.
Buyer must accommodate front and rear sensors during product installation and assumes all risk should these be tampered, rerouted, severed, or disconnected. This includes disabling visual, audio, or vibration alerts into the cab. Buyer assumes all risk and responsibility for wiring any supplemental auxiliary lights.
Buyer assumes all risk, liability, and cost for the installation and use of Dee Zee products. Dee Zee, Inc. assumes no liability for injury, loss, incidental or consequential damages in the event of an accident.
Running Boards & Steps
Thank you for choosing Dee Zee to add function and accessorize your vehicle. Dee Zee has been a staple brand in the truck accessory market since 1977 and we hold a reputation of quality manufacturing based in America’s Heartland. Our products are born through careful engineering and backed by industry leading warranty programs. We appreciate the opportunity to serve you and your vehicle!
Review the instruction pages in their entirety to prepare the required tools
Warning: Please check for wiring or other obstructions before drilling any holes in the vehicle. If it is necessary to drill any holes, Dee Zee recommends putting a sealant or rust inhibitory around all holes drilled into the body of the vehicle.
It is the sole responsibility of the vehicle owner to check for tire clearance. It is unlawful and dangerous to ride on any external vehicle step while the vehicle is in motion.
Cleaning : To be entitled to all warranty rights offered with the product, Dee Zee steps need to be cleaned regularly with a mild detergent. Do NOT use abrasive cleaners. For stainless steel products, the application of a high grade automotive wax is recommended.
For an electronic version of these instructions visit: www.deezee.com/instructions
Register your product online: www.deezee.com/registration
(W)
INSTALLATION INSTRUCTIONS
90DEG BENT END SIDEBARS
04-08 F-150 SUPER CAB (Excl. 04 Heritage)
PART #DZ 371291/DZ 371293
90DEG BENT END SIDEBARS
04-08 F-150 SUPER CAB
PARTS LIST:
Qty Description
1 Driver/Left Sidebar
1 Passenger/Right Sidebar
1 Driver/Left Front Mounting Bracket
1 Passenger/Right Front Mounting Bracket
1 Driver/Left Rear Mounting Bracket
1 Passenger/Right Rear Mounting Bracket
4 1/2” x 2” Hex Bolts
4 1/2” x 1-1/2” x 1/8” Flat Washers
4 1/2” Lock Washers
2 12mm x 40mm Single Bolt Plates
Qty Description
2 12mm x 45mm Double Bolt Plates
4 12mm Plastic Retainers
6 12mm x 32mm OD x 3mm Flat Washers
6 12mm Lock Washers
6 12mm Hex Nuts
4 8mm Clip Nuts
8 8-1.25mm x 30mm Hex Bolts
12 8mm x 24mm OD x 2mm Flat Washers
8 8mm Lock Washers
4 8mm Hex Nuts
Passenger/Right
Rear Mounting
Bracket
(4) 12mm Plastic
Retainers
Driver/Left Rear
Mounting Bracket
(2) 12mm Double Bolt Plates
(For rear only)
Passenger/Right
Front Mounting
Bracket
(2) 12mm Single Bolt
Plates (For front only) Driver/Left Front
Mounting Bracket
(NOTE: rear step pads are closer to the end of the tube)
Passenger/Right Sidebar
Front (NOTE: front step pads slightly back from end of tube)
Driver/Left Sidebar
PROCEDURE:
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION.
2. Starting at the passenger side-front of the vehicle, locate the round and rectangular openings in the inner body panel, (Figure 1B) . NOTE: Mounting holes may be covered with rubber plugs and/or sealing tape. Remove to uncover mounting locations.
3. Partially thread (1) 12mm Plastic Retainer onto (1) 12mm Bolt Plate, (Figure 1A) . Insert the Bolt Plate into the large round hole. Once inserted, thread the Plastic Retainer down the Bolt Plate until it is flush against the body panel, (Figure 1B) . NOTE: When properly installed, the Plastic Retainer is designed to prevent the Bolt Plate from falling into the body panel during Bracket installation.
4. Select (2) 8mm Clip Nuts. Insert the Clip Nuts, (with the nut portion to the inside), into the rectangular opening. Line up the threaded nut with the factory round hole, (Figure 1B) .
5. Select the passenger side front Mounting Bracket. Attach the Mounting Bracket to the Bolt Plate with
(1) 12mm Flat Washer, (1) 12mm Lock Washer and (1) 12mm Hex Nut, (Figure 2) . Do not tighten hardware at this time. Line up the center and rear slots in the Mounting Bracket with the previously installed Clip Nuts. Attach the Bracket to the Clip Nuts with (2) 8mm Hex Bolts, (2) 8mm Lock Washers and (2) 8mm Flat Washers. Do not tighten hardware at this time.
6. Next, line up the two holes in the bottom of the Mounting Bracket with the factory holes in the bottom of the body panel. Bolt the Mounting Bracket to the body panel using the included (2) 8mm x 30mm Hex
Page 1 of 4 11/20/13 Rev2(DP)
90DEG BENT END SIDEBARS
04-08 F-150 SUPER CAB
Bolts, (4) 8mm Flat Washers, (2) 8mm Lock Washers and (2) 8mm Hex Nuts, (Figure 2) . NOTE: Insert the Hex Bolts with the Flat Washers up, from the outside-in and through the Bracket. Snug all hardware but do not tighten at this time.
7. Move toward the rear to the back of the cab and locate the factory large round hole and smaller oval hole in the inner body panel. NOTE: Remove rubber plugs or sealing tape as necessary. Select (1)
12mm Double Bolt Plate, (Figure 3A) . Insert the Bolt Plate into the larger round opening and out the smaller oval hole, (Figure 3B) . Next, thread (1) 12mm Plastic Retainer onto the threaded end so that the retainer covers the smaller of the two holes, (Figure 3B) . Thread the Retainer all of the way down until tight against the sheet metal to help hold the Bolt Plate in place.
8. Select the passenger side Rear Mounting Bracket. Attach the Bracket to the Bolt Plate with (2) 12mm
Flat Washers, (2) 12mm Lock Washers and (2) 12mm Hex Nuts, (Figure 4) . Snug all hardware but do not tighten at this time.
9. Carefully unpack and select the passenger Sidebar.
Position the Sidebar up to the Mounting Brackets and attach using the included (2) 1/2 ” x 2” Hex Bolts, (2) 1/2” Lock Washers, and (2) 1/2” Flat Washers,
(Figure 5) . Snug but do not tighten at this time.
10. Level and adjust Sidebar and tighten all hardware.
11. Repeat Steps 2 – 10 for driver Sidebar installation.
12. Do periodic inspections of the installation to make sure all hardware is secure and tight.
To protect your investment , wax this product after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish.
For stainless steel : Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap may be used also to clean the Sidebar.
For gloss black finishes : Mild soap may be used to clean the Sidebars.
PASSENGER SIDE INSTALLATION PICTURED
12mm Flat Washer
12mm Lock Washer
12mm Hex Nut
Fig 1A
12mm Bolt Plate
12mm Plastic Retainer
Fig 1B
Front
Front
(2) 8mm x 30mm Hex Bolts
(2) 8mm Lock Washers
(2) 8mm Flat Washers
Align the 8mm clip nuts with the two round holes
(Fig 2) Passenger side front Bracket pictured
(2) 8mm x 30mm Hex Bolts
(2) 8mm Lock Washers
(4) 8mm Flat Washers
(2) 8mm Hex Nuts
Page 2 of 4 11/20/13 Rev2(DP)
90DEG BENT END SIDEBARS
04-08 F-150 SUPER CAB
PASSENGER SIDE INSTALLATION PICTURED
Rear
Fig 4
(Fig 3A) 12mm
Double Bolt Plate
Insert the 12mm Double Bolt Plate into the large round hole and back out the oval hole.
Thread the 12mm Plastic Retainer onto the threaded end and cover the oval hole.
1/2" x 2" Hex Bolts
1/2" Flat Washers
1/2" Lock Washers
2) 12mm Flat Washers
2) 12mm Lock Washers
2) 12mm Hex Nuts
Remove sealing tape and/or rubber grommets to uncover the rear location for the Mounting Brackets
(Fig 3B) Passenger side rear mounting location pictured. Shown with Plastic Retainer in place
Fig 5
Rear
Front
Page 3 of 4 11/20/13 Rev2(DP)
90DEG BENT END SIDEBARS
04-08 F-150 SUPER CAB
Passenger Side Installation Illustrated
12mm Bolt Plate
12mm Plastic Retainer
(2) 8mm Clip Nuts
(2) 8mm Flat Washers
(2) 8mm Lock Washers
(2) 8mm Hex Nuts
Front
Front
12mm Plastic Retainer
(2) 8mm x 30mm Hex Bolts
(2) 8mm Flat Washers
12mm Double
Bolt Plate
12mm Plastic Retainer
Front
(2) 8mm x 30mm Hex Bolts
(2) 8mm Lock Washers
(2) 8mm Flat Washers
Thread into 8mm Clip Nuts
Front
12mm Flat Washer
12mm Lock Washer
12mm Hex Nut
1/2" x 2" Hex Bolt
1/2" Lock Washer
1/2" Flat Washer
Page 4 of 4 11/20/13 Rev2(DP)

Public link updated
The public link to your chat has been updated.
Advertisement