Advertisement
Advertisement
1-800-779-2102
Mon – Thurs: 8:00am - 5:00pm | Friday: 8:00am - 4:00pm CST
INSPECT YOUR PRODUCT FOR DAMAGE & MISSING
PARTS BEFORE PROCEEDING TO INSTALLATION
PROCEDURE FOR RETURNS OR MISSING HARDWARE
-PLEASE CONTACT THE ORIGINAL POINT OF PURCHASE FOR:
SHIPPING DAMAGE, RETURNS, OR WARRANTY CLAIMS
-CONTACT DEE ZEE DIRECTLY FOR MISSING PARTS OR HARDWARE
WWW.DEEZEE.COM
REGISTER YOUR PRODUCT ONLINE: www.deezee.com/registration
VIEW INSTRUCTIONS ONLINE: www.deezee.com/instructions
Operating, servicing, and maintaining a passenger vehicle can expose you to chemicals such as lead, phthalates, engine exhaust, and carbon monoxide that are known to the State of California cause cancer and birth defects or other reproductive harm. To minimize exposure, service your vehicle and its accessories in a well-vented area and wear gloves or wash your hands frequently.
DEE ZEE, INC. WARRANTY AGREEMENT
Dee Zee, Inc. guarantees the original purchaser a limited lifetime warranty against manufacturer defects in materials, workmanship, and design under normal use, excluding damage resulting from road hazards such as gravel or other debris, product misuse, improper installation, impairments from accidents, product modifications, improper repairs, spills, vandalism, product neglect, or acts of God.
This warranty applies only to the original purchaser of new product(s) and is limited to the replacement of genuine Dee Zee products. Modification of any kind to Dee Zee products voids all warranty coverage. Warranty does not include electrical components, installation, cost of removal, labor, transportation costs, loss of use, inconvenience, or consequential damages.
WARRANTY COVERAGE - MATERIALS & WORKMANSHIP
LIMITED LIFETIME WARRANTY :
• STAINLESS STEEL : Side Steps, Grill Guards, Bull Bars, Bed Caps, and Side Rails
• ALUMINUM : Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Bed Protection, Side Rails, Invis-A-Racks, and
Cab Racks
• PLASTIC : Storage Boxes
• OTHER : Front and Rear Bumpers
THREE-YEAR WARRANTY :
• POWDER-COATED / E-COATED STEEL : Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Cab Racks, Sport Bar
Ladder Racks, Cargo Carriers, Mounting Brackets (NX, Rough Step, and Bumper Guards only)
• OTHER : Tailgate Assist, Bed Mats, Floor Mats, Auxiliary Fuel Connection Kits, and All Products Not Otherwise Listed
Individually
WARRANTY COVERAGE – FINISH PROTECTION
The finish of all Dee Zee products is covered for one-year (1) from the date of purchase. Dee Zee products have a high quality finish that must be cared for and maintained like any other exposed finish on the vehicle. Protect the finish with non-abrasive automotive wax (e.g. Pure Carnauba) on a regular basis. Applying soaps, polishes, or waxes that contain an abrasive compound may scratch the finish and leave the exposed material susceptible to corrosion.
WARRANTY COVERAGE – COMPONENT PARTS
Operational items such as shocks, latches, hinges, and wear items including, but not limited to, mud flaps, step pads, toolbox tray, end caps, hardware, seals, etc. have a one-year (1) warranty. Replacement component parts can be ordered via credit card
(MasterCard or VISA) by calling 1-800-779-2102. All replacement parts are non-returnable and non-refundable.
GPI® FUEL PUMPS & ACCESSORIES
All Great Plains Industries (GPI) products, including transfer tank pumps and fuel meters are covered by GPI’s warranty policies.
Dee Zee’s warranty terms do not apply to GPI products. To submit a warranty claim, please contact GPI at 1-800-835-0113 or visit www.gpi.net
.
WARRANTY SUBMISSION PROCEDURE
All warranty claims will be initiated at the place of purchase. The original purchaser will be required to present the original sales receipt with purchase date shown and provide photographs of the defect.
In the event the originally purchased product style is no longer available, Dee Zee will warranty the defective part with a current equivalent. If a comparable product is no longer available, the product would be returned to the store of purchase for a refund or the applicable cost difference can be paid to choose an alternate style.
DISCLAIMER
All products are sold as appearance accessories and should not be relied upon as protection for the vehicle or its occupants in the event of an accident. Vehicles equipped with a supplemental restraints system (air bags) deployed by impact and collision avoidance systems should not be modified in any way. Always consult the vehicle manufacturer if you have any questions regarding supplemental restraint systems and sensors.
Buyer must accommodate front and rear sensors during product installation and assumes all risk should these be tampered, rerouted, severed, or disconnected. This includes disabling visual, audio, or vibration alerts into the cab. Buyer assumes all risk and responsibility for wiring any supplemental auxiliary lights.
Buyer assumes all risk, liability, and cost for the installation and use of Dee Zee products. Dee Zee, Inc. assumes no liability for injury, loss, incidental or consequential damages in the event of an accident.
Side Bed Rails
Thank you for choosing Dee Zee to add function and accessorize your vehicle. Dee Zee has been a staple brand in the truck accessory market since 1977 and we hold a reputation of quality manufacturing based in America’s Heartland. Our products are born through careful engineering and backed by industry leading warranty programs. We appreciate the opportunity to serve you and your vehicle!
Review the instruction pages in their entirety to prepare the required tools
Warning : Test fit truck bed rails to obtain proper placement before installing this product.
Dee Zee bed rails should never be used to secure cargo or used as weight bearing rails. Please refer to your truck owner’s manual for cargo placement and tie down ratings of the truck bed.
Cleaning : To be entitled to all warranty rights offered with the product, Dee Zee side rails need to be cleaned regularly with a mild detergent. Do NOT use abrasive cleaners. For stainless steel products, the application of a high grade automotive wax is recommended.
For an electronic version of these instructions visit: www.deezee.com/instructions
Register your product online: www.deezee.com/registration
(W)
INSTALLATION INSTRUCTIONS
BOLT-ON BED RAIL
PART# DZ 99600/DZ 99601/DZ 99602/DZ 99603/ DZ 99606/ DZ 99607/DZ
99608/DZ 99609/DZ 99610/
BOLT-ON BED RAIL
PARTS LIST:
2 Bed Rails 1 Allen Wrench
4 80mm Rectangular Threaded Plates 4 10-1.50mm x 50mm Allen Head Bolts
4 50mm Parallelogram Threaded Plates 4 10mm x 20mm OD x 2mm Stainless Steel
Flat Washers
PROCEDURE:
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ
INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. CUTTING MAY BE
REQUIRED. VERIFY BEDRAIL IS CORRECT LENGTH TO COVER STAKE POCKETS
BEFORE CUTTING!
2. On models with factory equipped plastic bedside covers, determine if there is a separate removable cover over each of the stake pockets.
a. On vehicles with removable covers : Remove the small plastic cover over each stake pocket, (Figure 1) . b. On vehicles without removable covers : Locate the center of the stake pocket.
Carefully cut or drill a small opening in the plastic cover in the center of the stake pocket. WARNING , verify exact location of stake pocket before drilling/cutting plastic cover or damage to top of bedside may result. Gradually enlarge the opening to the size of the stake pocket only, (Figure 2) . IMPORTANT, DO NOT cut along factory lines molded into the plastic cover as these lines may not represent the correct location or size of the stake pocket and may be larger than the actual stake pocket opening.
3. Attach (1) 10mm Bolt, (1) 10mm Flat Washer, and (1) Threaded Plate to each end of Bed Rail as shown in Figure 3 . NOTE: Depending upon your vehicle, use the correct size Threaded
Plate. For small stake pockets, use the parallelogram-shaped plate, (Figure 4A) . For larger stake pockets, use the rectangular-shaped plate, (Figure 4B) . Leave hardware loose.
4. Position the Bed Rail onto the top of the bed. Attach the front of the Bed Rail by tilting the Bolt and/or Bedrail until one side of the Plate engages the lip on the pocket, (Figure 4A & 4B) .
Once one side of the Threaded Plate is in place under the lip, slide the Plate completely into the stake pocket until the opposite end of the Plate is clear and is in place across the pocket.
Repeat this Step to install the remaining end of the Bed Rail.
5. To tighten the Threaded Plates, start at the front and pull up on the Bed Rail to hold the plate in place and centered across the pocket. Keep pulling up on the Bed Rail to prevent the Plate from moving/rotating while tightening the Mounting Bolt. Tighten the Bolt until it is snug but do not fully tighten at this time, (Figure 5A & 5B) . Repeat this Step to tighten the rear Bolt on the
Bedrail. Once properly centered and aligned, fully tighten both Mounting Bolts.
6. Repeat Steps 2 – 5 for opposite side Bed Rail installation.
7. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment , wax this product after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish.
For stainless steel : Aluminum polish may be used to polish small scratches and scuffs on the finish.
Mild soap may be used also to clean the Bedrails.
Page 1 of 3 1/20/11 Rev1(DP)
Fig 1
Dotted line represents approximate size of stake pocket hidden under plastic cover
Note that size of stake pocket may be smaller than line molded into cover by factory.
Determine location of stake pocket before cutting cover.
Picture for example only, actual vehicle may be different.
Thin black line represents plastic bed cap
Top of bedside
Fig 2
Bed Rail
Side of Stake Pocket
Threaded
Plate Fig 3
Page 2 of 3
BOLT-ON BED RAIL
Remove cover if equipped.
Note, on some vehicles, size of opening in cover may be larger than actual stake pocket
Determine location of center of stake pocket before cutting cover. Start with a small hole and gradually enlarge the hole to the size of the stake pocket only.
Do not follow lines molded into cover!
10mm x 50mm Allen Bolt
Top Plate
1/20/11 Rev1(DP)
Fig 4A
Small Stake Pocket Pictured
Small Stake Pocket Pictured
Engage one side first
BOLT-ON BED RAIL
Oversized Stake Pocket Pictured
Fig 4B
Oversized Stake Pocket Pictured
Fig 5A Fig 5B
Pull up on Bedrail as you tighten the mounting screw to hold the threaded plate in place against inside of stake pocket
Complete Installation
Page 3 of 3 1/20/11 Rev1(DP)

Public link updated
The public link to your chat has been updated.
Advertisement