Dee Zee DZ99709B Hex Side Rail Instructions
Advertisement
Advertisement
1-800-779-2102
Mon – Thurs: 8:00am - 5:00pm | Friday: 8:00am - 4:00pm CST
INSPECT YOUR PRODUCT FOR DAMAGE & MISSING
PARTS BEFORE PROCEEDING TO INSTALLATION
PROCEDURE FOR RETURNS OR MISSING HARDWARE
-PLEASE CONTACT THE ORIGINAL POINT OF PURCHASE FOR:
SHIPPING DAMAGE, RETURNS, OR WARRANTY CLAIMS
-CONTACT DEE ZEE DIRECTLY FOR MISSING PARTS OR HARDWARE
WWW.DEEZEE.COM
REGISTER YOUR PRODUCT ONLINE: www.deezee.com/registration
VIEW INSTRUCTIONS ONLINE: www.deezee.com/instructions
Operating, servicing, and maintaining a passenger vehicle can expose you to chemicals such as lead, phthalates, engine exhaust, and carbon monoxide that are known to the State of California cause cancer and birth defects or other reproductive harm. To minimize exposure, service your vehicle and its accessories in a well-vented area and wear gloves or wash your hands frequently.
DEE ZEE, INC. WARRANTY AGREEMENT
Dee Zee, Inc. guarantees the original purchaser a limited lifetime warranty against manufacturer defects in materials, workmanship, and design under normal use, excluding damage resulting from road hazards such as gravel or other debris, product misuse, improper installation, impairments from accidents, product modifications, improper repairs, spills, vandalism, product neglect, or acts of God.
This warranty applies only to the original purchaser of new product(s) and is limited to the replacement of genuine Dee
Zee products. Modification of any kind to Dee Zee products voids all warranty coverage. Warranty does not include electrical components, installation, cost of removal, labor, transportation costs, loss of use, inconvenience, or consequential damages.
WARRANTY COVERAGE - MATERIALS & WORKMANSHIP
LIMITED LIFETIME WARRANTY:
STAINLESS STEEL: Side Steps, Grill Guards, Bull Bars, Bed Caps, and Side Rails
ALUMINUM: Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Bed Protection, Side Rails, Invis-A-
Racks, and Cab Racks
PLASTIC: Storage Boxes
OTHER: Front and Rear Bumpers
THREE-YEAR WARRANTY:
POWDER-COATED / E-COATED STEEL: Side Steps, Running Boards, Storage Boxes, Transfer Tanks, Cab Racks,
Sport Bar Ladder Racks, Cargo Carriers, Mounting Brackets (NX, Rough Step, and Bumper Guards only)
OTHER: Tailgate Assist, Bed Mats, Floor Mats, Auxiliary Fuel Connection Kits, and All Products Not Otherwise
Listed Individually
WARRANTY COVERAGE – FINISH PROTECTION
The finish of all Dee Zee products is covered for one-year (1) from the date of purchase. Dee Zee products have a high quality finish that must be cared for and maintained like any other exposed finish on the vehicle. Protect the finish with non-abrasive automotive wax (e.g. Pure Carnauba) on a regular basis. Applying soaps, polishes, or waxes that contain an abrasive compound may scratch the finish and leave the exposed material susceptible to corrosion.
WARRANTY COVERAGE – COMPONENT PARTS
Operational items such as shocks, latches, hinges, and wear items including, but not limited to, mud flaps, step pads, toolbox tray, end caps, hardware, seals, etc. have a one-year (1) warranty. Replacement component parts can be ordered via credit card (MasterCard or VISA) by calling 1-800-779-2102. All replacement parts are non-returnable and non-refundable.
GPI® FUEL PUMPS & ACCESSORIES
All Great Plains Industries (GPI) products, including transfer tank pumps and fuel meters are covered by GPI’s warranty policies. Dee Zee’s warranty terms do not apply to GPI products. To submit a warranty claim, please contact GPI at 1-
800-835-0113 or visit www.gpi.net
.
WARRANTY SUBMISSION PROCEDURE
All warranty claims will be initiated at the place of purchase. The original purchaser will be required to present the original sales receipt with purchase date shown and provide photographs of the defect.
In the event the originally purchased product style is no longer available, Dee Zee will warranty the defective part with a current equivalent. If a comparable product is no longer available, the product would be returned to the store of purchase for a refund or the applicable cost difference can be paid to choose an alternate style.
DISCLAIMER
All products are sold as appearance accessories and should not be relied upon as protection for the vehicle or its occupants in the event of an accident. Vehicles equipped with a supplemental restraints system (air bags) deployed by impact and collision avoidance systems should not be modified in any way. Always consult the vehicle manufacturer if you have any questions regarding supplemental restraint systems and sensors.
Buyer must accommodate front and rear sensors during product installation and assumes all risk should these be tampered, rerouted, severed, or disconnected. This includes disabling visual, audio, or vibration alerts into the cab.
Buyer assumes all risk and responsibility for wiring any supplemental auxiliary lights.
Buyer assumes all risk, liability, and cost for the installation and use of Dee Zee products. Dee Zee, Inc. assumes no liability for injury, loss, incidental or consequential damages in the event of an accident.
Side Rails
Thank you for choosing Dee Zee to add function and accessorize your vehicle. Dee Zee has been a staple brand in the truck accessory market since 1977 and we hold a reputation of quality manufacturing based in America’s Heartland. Our products are born through careful engineering and backed by industry leading warranty programs. We appreciate the opportunity to serve you and your vehicle!
Review the instruction pages in their entirety to prepare the required tools
Warning: Please check for wiring or other obstructions before drilling any holes in the vehicle. If it is necessary to drill any holes, Dee Zee recommends putting a sealant or rust inhibitory around all holes drilled into the body of the vehicle.
It is the sole responsibility of the vehicle owner to check for tire clearance. It is unlawful and dangerous to ride on any external vehicle step while the vehicle is in motion.
Cleaning: To be entitled to all warranty rights offered with the product, Dee Zee steps need to be cleaned regularly with a mild detergent. Do NOT use abrasive cleaners. For stainless steel products, the application of a high grade automotive wax is recommended.
For an electronic version of these instructions visit: www.deezee.com/instructions
Register your product online: www.deezee.com/registration
A
Hex Series Side Rail Installation Instructions
DZ99707, DZ99708, DZ99709 Ford F150 04-18 and Super Duty 17-Current
Hex Side Rail
B Endcap C Front and Rear Bracket
X2
Various
D Middle Bracket
ONLY USED
ON 8ft BED
B 2568PN X2
G
8mm X 90mm Button Head
Bolt
EC DZE-581ASSY X4
E Stanchion
SRS HEX
5 ft and 6 ft X4
8ft X6
H 8mm X 14 Bolt
B 2571PN
F Plate
X4
B 2570
I
5 ft and 6 ft X4
8ft X6
8mm X 1.25 Square Nut
5 ft and 6 ft X4
8ft X6
PN 1281
J 5mm Allen Wrench
PN 247
5 ft and 6 ft X4
8ft X6 PN 1262
5 ft and 6 ft X4
8ft X6
PN 1282
Tools Required
X1
13mm
DZ 99707,8,9
Straight Blade
Screwdriver
Rubber Mallet
Tape Measure
Page 1 of 5
Utility Knife
Drill
3/8”
08/29/2018
1 First use the screwdriver to pry up on the stake pocket cover as shown from the front and middle and rear locations. Only the 8 foot bed application has a middle location. If you have a 5’ bed you will need to cut the bed cap to uncover the stake pocket. Drill a hole in the X on the template or measure from the front of the bed cap and the inside of the truck bed. Then cut out the rectangle of the template.
To take off covers
Pry up here
TEMPLATES ARE ON
THE LAST PAGE OF
INSTRUCTIONS
2
Install all endcaps (B) on the rails (A) by first hand pushing them to set in place, then hitting them with a rubber mallet.
A
B
DZ 99707,8,9
Page 2 of 5
08/29/2018
3 Assemble the front bracket by putting the bolt (G) through the stanchion (E) then through the plate (F) and thread a front bracket (C) onto the bolt. Repeat this step for the rear bracket.
G
E
F
C
4
Install the front bracket assembly from step 3 into the front stake pocket. Twist the front bracket so that the bracket is perpendicular with the truck bed. Hand tighten the bolt.
Do not fully tighten hardware at this time. Repeat this step in the rear location on the truck bed.
DZ 99707,8,9
Page 3 of 5
Cut away view from the back
08/29/2018
5
Skip this step if you do not have an 8 foot truck bed. If you do have an 8 foot truck bed, assemble the middle bracket by putting the bolt (G) through the stanchion (E) then through the plate (F) and thread a middle bracket (C) onto the bolt. Hand tighten bolt. Do not fully tighten at this time.
G
E
F
C
6
Skip this step if you do not have an 8 foot truck bed. If you do have an 8 foot truck bed, install the middle bracket assembly from step 5 into the middle stake pocket. Twist the middle bracket so that the bracket is perpendicular with the truck bed. Hand tighten the bolt. Do not fully tighten hardware at this time.
DZ 99707,8,9
Page 4 of 5
Cut away view from the back
08/29/2018
7
Install bolt (H) and square nut (I) through the upper hole of the stanchions in all locations and slide rail through the stanchions and square nuts. Center the rail and
Fully tighten all hardware at this time using the allen wrench (J) provided.
H
I
DZ 99707,8,9
Page 5 of 5
08/29/2018

Public link updated
The public link to your chat has been updated.
Advertisement