2 x serial PCI Card
2 x serial PCI Card
Product-No: 89003
User m anu al No: 890 03-a
w w w. de l oc k . d e
Description
The DeLock PCI card expands your PC by two external serial Ports. You can
connect devices like scanner, modem, mouse etc. to the card.
Specification
• 2 x DB9 serial port
• Compatible with 16C550 UART
• FIFO: 16 byte
• Data transfer rate up to 1 Mbps
• Plug & Play
• Automatically selects IRQ and I/O
• Supports PCI IQR sharing
• 32-Bit PCI standard 2.1
• for Windows 98SE/ME/2000/NT4.0/XP, Linux, DOS
System requirements
• PC with one free PCI Slot
• Windows 98SE/ME/2000/NT4.0/XP, Linux, DOS
Package content
• PCI card
• Driver CD
• User manual
*Make sure that product package contains all items before operation. If any item is missing or
damaged, then please contact your dealer immediately.
-1-
Hardware Installation
Note:
Follow the general instructions for installation of the card. If necessary, read the
manual of your computer, or ask a specialist for help.
1. Turn off your PC, and unplug the power cord.
2. Open the housing.
3. Remove the slot holder from the available PCI.
4. Insert the card straight and carefully into the free PCI slot, until it is well seated.
5. Use a screw to attach the card to the housing.
6. Reattach the housing, and connect the power cord to the AC adapter.
Driver Installation
Windows XP Service Pack 2
Controller installation:
1. After installing the hardware and starting your computer the hardware
assistant will appear. Choose the option “No, not this time” and click
“Continue”.
2. Put the driver CD in the CD-ROM drive, choose “Install software
automatically” and click “Continue”.
3. Choose the driver "nm9835s" and click ”Continue“.
4. When driver is located, click “Continue installation”.
5. Click “Finish”.
Install serial interface
1. The hardware assistant appears with a newly found serial interface. Choose
“No, not this time” and click “Continue”.
2. Choose “Install software automatically” and click “Continue”.
3. Click “Continue installation”.
4. Click “Finish”.
5. When the second serial port is found, repeat steps 1-4.
Your PCI card is installed and ready for use.
-2-
Windows 2000/XP Service Pack 1
Controller installation:
1. After installing the hardware and starting your computer the hardware
assistant appears.
2. Put the driver CD in the CD-ROM drive, choose the driver "nm9835s" and click
“Continue”.
3. When driver is located, click “Continue installation”.
4. Click “Finish”.
Install serial interface
1. The hardware assistant appears with a newly found serial interface. Choose
“Install software automatically” and click “Continue”.
2. Click “Continue installation”.
3. Click “Finish”.
4. When the second serial port is found, repeat steps 1-4.
Your PCI card is installed and ready for use.
Windows 98/98SE/ME
Controller installation:
1. After installing the hardware and starting your computer the hardware
assistant appears.
2. Put the driver CD in the CD-ROM drive and click “Continue”.
3. Choose the option “Search for best driver” and click “Continue”.
4. Choose the option “CD ROM drive” and choose the path: CD ROM drive
NetMos\nm9835s\Win98, click ”OK“, then ”Continue“.
5. Click “Continue”. The driver is being installed.
6. Click “Finish”.
7. Your PC must be restarted now, click “Yes”.
8. After rebooting the device is ready for use.
-3-
Support Delock
If you have further questions, please contact our customer support
[email protected] / www.delock.de or phone
0700 - DELOCKGE (0700 - 335 625 43).
You can contact our service hotline during the following times:
Mon - Fry: 9:00 - 17:30 pm charge 0,12 € / min*
* A connection fee applies according to fee schedule of Deutsche Telekom AG or
your local telephone provider.
All callers outside of Germany dial please 00493081789324
You can find current product information on our homepage: www.delock.de
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user's manual may be reproduced, or transmitted for any purpose,
regardless in which way or by which means, electronically or mechanically,
without explicit written approval of Delock.
Edition: 01/2006
-4-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement