Page 1 of 38 Dean, FVSc., AAU, Khanapara Faculty of Veterinary

Page 1 of 38 Dean, FVSc., AAU, Khanapara Faculty of Veterinary
Page 1 of 38
Faculty of
Veterinary
Science
Assam
Agricultural
University
Khanapara,
Guwahati781022
Assam, India
Phone
No.
Fax
Website
+91-361-2337700
:+91-361-2337700
www.vetbifguwahati.ernet.in
NIQ Ref.: AAU/CVSc/ICAR-Dev/13-14/
Stores & Purchase
Dean,
FVSc.,
AAU,
Khanapara
Date :
OFFICE OF THE DEAN, FACULTY OF VETERINARY SCIENCE
ASSAM AGRICULTURAL UNIVERSITY, KHANAPARA, GUWAHATI-22
NOTICE FOR QUOTATION
Sealed quotations are invited separately from reputed manufacturer/authorized
dealer/suppliers for supply of various items under package-I to V to the Faculty of Veterinary
Science, Assam Agricultural University, Khanapara, Guwahati-781 022. The quotation/
quotations will be received at the office of the undersigned up to 25 th October’ 2013 (Last
date of receipt of the Quotation).
Details of the items under each package along with the terms & conditions and
specifications may be collected from the office of the undersigned during office hours after 3
days of the publication of this advertisement on payment of Rs. 300.00(For each package) for
the list of items under package I to V in the form of Bank Draft drawn in favour of the Dean,
Faculty of Veterinary Science, AAU, Khanapara, Guwahati-22. The list of items can also
be down loaded from web site www.vetbifguwahati.ernet.in.
Pakage - I
Pakage -II
Pakage - III
Pakage -IV
Package - V
:
:
:
:
:
Equipments
Printing of “VETCOL”.
Sports Goods.
Utensil.
Stationery items. .
Sd/Dean,
F.V.Sc., AAU, Khanapara.
Memo No. AAU/CVSc/ICAR Dev/13-14/ 6257-76
Dtd. 26.09.2013
Copy forwarded for information and necessary action to :1. The Comptroller, Assam Agricultural University, Jorhat – 13.
2. All Head of the Departments, C.V.Sc., AAU, Khanapara.
Page 2 of 38
3. The Registrar/Director of Extension Education/Director of Research/Director of
Research(Vety)/Director of Physical Plant/Director of PG Studies/Director of Students
Welfare/Director of Clinics/Chief Librarian/Assoc. Director of Extension Education
/Assoc. Director of Students Welfare/Dy. Registrar(Acad)/Dy. Comptroller, Jorhat/
Khanapara. They are requested to display the NIT’ in their notice board.
4. Coordinator, Bioinformatics Centre, with a request to post the detail advertisement in
web site www.vetbifguwahati.ernet.in.
5. The Advertising Manager, The Assam Tribune, Chandmari, Guwahati-781 003 and The
Times of India (North East Edition) with a request to publish the above advertisement in
minimum size and space in one issue urgently and submit the bill in quadruplicate along
with the paper cut for payments.(They are requested to submit the bills in triplicate to the
undersigned within 15 days from the date of publishing the tender notice.)
6. The Director General of Commercial Intelligence & Statistics, 1, Council House Street,
Kolkata-700001. He is requested to publish the above quotation notice one time and
submit the bills in triplicate to the undersigned for payment.
7. Notice Board, Dean’s Office, FVSc, AAU, Khanapara.
8. Office copy.
Sd/Dean,
F.V.Sc., AAU, Khanapara.
Page 3 of 38
GENERAL TERMS AND CONDITIONS:
1. Any item offered/quoted should conform to the technical specifications desired by the
purchaser. Quotations for items beyond the scope of the technical specification asked
for shall not be entertained.
2. The compliance statement (technical specification desired and offered) alongwith
separate sheet of Terms & Conditions should invariably accompany the quotation
both as ‘hard copy’ and ‘soft copy’ typed in MS word in A4 size paper in landscape
orientation (Font size 12, Times New Roman) in the prescribed format (Annexure-I &
II), without which the quotation shall not be considered.
3. In case the tender document is downloaded from the website, the bidder shall have to
deposit Rs. 300.00 in the form of Bank Draft drawn in favour of Dean, Faculty of
Veterinary Science, AAU, Khanapara, Guwahati-22.
INSTRUCTION TO BIDDERS
1. All Quotations should mention in the cover of the Envelope distinctly the Package No.,
Name of the Item, Item No., NIQ Ref. No., Bidder’s Name & Address, Contact No. etc.
as shown below:PACKAGE ……..
QUOTATION FOR SUPPLY OF …….(Item name & No.) FOR THE FVSc., AAU,
KHANAPARA, GUWAHATI
NIQ REF NO. (NIQ Ref. No……..), DATED…………………, LAST DATE FOR
SUBMISSION.
To,
The Dean,
Faculty of Veterinary Science
Assam Agricultural University
Khanapara, Guwahati- 781022
Assam, India
From: M/s ____________________
Contact No.:___________________
Email ID:_____________________
2. In case of Package I to V standard Technical literature preferably printed & supplied by
manufacturer concern on each of the items offered.
3. Dealership certificate on the offered products in case of dealer/s.
4. List of reputed organizations/Institutions, where similar orders have been executed
(copies of the purchase/work orders will have to be enclosed).
5. Up-to-date Sales Tax clearance certificate (for vendors outside the State of Assam)/VAT
Registration Certificate indicating also the TIN number (for vendors from within the State
of Assam) of the firm will have to accompany the quotation to be submitted.
6. In case the offered price is inclusive of all taxes, the tax components in details should
be shown separately.
7. Earnest money should be shown in details in the forwarding letter.
Page 4 of 38
8. Details of nature and maximum period of warranty offered by the Bidder/Vendor.
9. After Sales Service: The name & address of the nearest available authorized service
centre to CVSc., AAU, Guwahati, should be stated in the quotation.
10. NOTE: The bid documents are not transferable and the firm’s seal and signature of the
authorized official must appear on all the papers and envelopes submitted.
11. At the time of delivery/Installation the supplier should stick a Sticker in a suitable side of
the instrument/Machine indicating the following:· The name of the company/supplier:· Date of Delivery:· Department/Office:· Date of Installation:· Expiry date of warranty period as per tender:· Date of start for AMC:· Contact No.:
Sd/Dean,
FVSc., AAU, Khanapara,
Guwahati-22
___________________________________________________________________________
PACKAGE – I
TERMS & CONDITIONS:
(Please note the term ‘both foreign & indigenous’ wherever mentioned, means the term is
applicable to both foreign & indigenous purchase)
01. Rates: Rates quoted for indigenous items must be on FOR Faculty of Veterinary Science
,Assam Agricultural University, Khanapara, Guwahati- 781022, on DOOR DELIVERY
Basis, with break-ups as per details below (For import items please refer ‘Additional Terms
for imported goods’ below).
Break-ups of cost:
(a) Basic Price
(b) (+) Central Excise Duty, if any
(c) (+) VAT/ Central Sales Tax (On Sub-Total Price, including Excise Duty, if any)
(d) (+) Freight & Insurance Charge, if any
(e) (+) Installation & Commissioning Charge, if any
(f) Grand Total F.O.R. CVSc., AAU, Guwahati, Price
Note: Vague terms like “packing, forwarding, transportation etc. extra” without mentioning
the specific amount will not be accepted. Such offers shall be treated as incomplete and
rejected. Bidders shall indicate their rates in clear/visible figures as well as in words and shall
not alter/overwrite/make cutting in the quotation. In case of a mismatch, the rates written in
words will prevail.
02. Validity (Both foreign & indigenous): Quoted rates must be valid for minimum 120 days.
03. Earnest Money (Both foreign & indigenous):
All firms are required to submit Earnest Money along with the Quotation. The EMD
of unsuccessful bidders shall be returned after award of contract. All tenders received without
EMD shall be summarily rejected.
Refundable earnest money deposit, amounting to minimum 2.5% of the total quoted
value ( rounded off to the nearest thousand rupees) through Demand Draft or Fixed Deposit
drawn in favour of Dean, Faculty of Veterinary Science, Assam Agricultural University,
Page 5 of 38
Khanapara, Guwahati- 781022, Assam, India payable at Guwahati, will have to accompany
all quotations to be submitted. Quotations submitted without appropriate amount of earnest
money are likely to be rejected.
Earnest money deposit will not bear any interest, and have to be in the form of
demand draft only.
04. PENALTY FOR DELAYED DELIVERY (for both foreign & indigenous):
In case of supply order for the SCIENTIFIC EQUIPMENTS/ APPARATUS, the date of
delivery should be strictly adhered to. In the event of delayed delivery, installation &
commissioning i.e. after the expiry of the period as agreed by both the parties, the vendor
shall be liable for a penalty deduction at a percentage of the value of the undelivered
equipment subject to a maximum of 10% (ten percent) as detailed below:
@1% up to one week;
@2.5% up to two weeks;
@5% up to three weeks;
@10% for four weeks and above
For the purpose of this clause, part of the week is considered as a full week. In case of
delayed delivery, the Chairman, Purchase committee, CVSc., AAU, Khanapara, Guwahati
reserves the right not to accept the subject consignment.
05. IN CASE OF INDIGENOUS SUPPLIES, the goods should be insured against theft, loss
or breakage during transit and insurance charges should not exceed 1% of the cost of material
supplied, the rates of Sales Tax, Excise Duty etc. (as applicable) should be clearly indicated.
07. PRE-INSTALLATION REQUISITES (Both foreign & indigenous):
Pre-installation requisites (electrical/floor/space/air-conditioning etc.), if any should
invariably be mentioned clearly. Installation/ Training will be the full responsibility of the
supplier/ Indian Agent.
08. GENUINE PRICING (Both foreign & indigenous):
Vendor is to ensure that quoted price is not more than the price offered to any other customer
in India to whom this particular item has been sold, particularly to other SAU/ IIT/ICAR
Institutes and other Government Organization. Copy of the latest price list for the quoted
item, applicable in India, must be enclosed with your offer.
09. EXCISE DUTY: The Institute is exempted from payment of Customs vide Govt.
Notification No. 51/96-Customs, dated 23.07.1996 and /Central Excise Duty exemption in
term of Govt. Notification No. 10/97-Central Excise dtd. 01.03.1997 with Regn.No.
TU/V/RG-CDE (500)/2012, dated 14.09.2012.
10. VAT: For a vendor within the State of Assam, appropriate VAT (to be deducted at
source) will be applicable. For exemption from Octroi, wherever required, the Institute will
issue necessary certificates.
11. Entry Tax: Assam Govt. Entry Tax – [To be paid by CVSc, Khanapara, Guwahati, not by
the vendor], wherever applicable, will be added while evaluating cost status of the concerned
equipment to be supplied by vendors from outside the State of Assam.
12. DELIVERY:
(a) Delivery of goods at CVSc, Khanapara, Guwahati, will have to be maximum within
45(Forty-five) days from the date of issue of the Purchase Order.
(b) SAFE DELIVERY OF GOODS: All aspects of safe delivery shall be the exclusive
responsibility of the vendor. At the destination site, the cartons will be opened only in the
presence of CVSc, Khanapara, Guwahati user/representative and vendor's representative and
the intact position of the seal for not being tempered with, shall form the basis for certifying
the receipt in good condition.
(c) NO PART DELIVERY: Part shipment will not be allowed.
13. Mode of Payment for Indigenous Purchase (For import items please refer ‘Additional
Terms for imported goods’):
Page 6 of 38
(1) Payment for Indigenous Purchases will be maximum within 45 days from the date of
successful delivery and installation of goods at FVSc., AAU, Khanapara Guwahati, generally
through A/c payee cheque. In case payment is to be made by DD, the Draft commission will
be deducted from the bill amount.
Note: Please note as per Institute’s norm advance payment is not allowed for any purchase.
14. The offers (Both foreign & indigenous) submitted by telex/ telegram/ fax/ E-mail etc.
shall not be considered. No correspondence will be entertained on this matter.
15. Late and delayed tender (Both foreign & indigenous):
Late and delayed tender will not be considered. In case any unscheduled holiday occurs on
prescribed closing the next working day shall be the prescribed date of closing.
16. Conditional tenders not acceptable (Both foreign & indigenous): Conditional tenders
shall not be accepted on any ground and shall be rejected straightway. In other word, printed
conditions mentioned in the tender bids submitted by vendors will not be binding on CVSc,
AAU, Khanapara. All the terms and conditions for the supply, payment terms, penalty etc.
will be as those mentioned herein and no change in the terms and conditions by the vendors
will be acceptable.
17. Specifications are basic essence of the product (Both foreign & indigenous): It must be
ensured that the offers are strictly as per our specifications. At the same time it must also be
kept in mind that merely copying our specifications in their quotation shall not make firms
eligible for consideration. A quotation has to be supported with the printed technical
leaflet/literature (wherever applicable) and the specifications mentioned in the quotation must
be reflected/ supported by such printed technical leaflet/literature model quoted/tendered
specifications should invariably be highlighted in the leaflet/literature for easy reference.
18. Enquiry during the course of evaluation not allowed (Both foreign & indigenous): No
enquiry shall be made by the bidder(s) during the course of evaluation of the tender till final
decision is conveyed to the successful bidder(s). However, the Committee/its authorized
representative and office of CVSc., AAU, Khanapara, GUWAHATI can make any
enquiry/seek clarification from the bidders. In such a situation, the agency shall extend full
co-operation. The bidders can also be asked to arrange demo of the offered items, in a short
period notice, as such the bidders have to be ready for the same.
19. The acceptance of the quotation(Both foreign & indigenous) will rest solely with the
Dean, FVSc., AAU, Khanapara, Guwahati, who in the interest of the Institute is not bound to
accept the lowest quotation and reserves the right to himself to reject or partially accept any
or all the quotations received without assigning any reasons.
20. Force Majeure (Both foreign & indigenous): If the performance of the obligation of either
party is rendered commercially impossible by any of the events hereafter mentioned that
party shall be under no obligation to perform the agreement under order after giving notice of
15 days from the date of such an event in writing to the other party, and the events referred to
are as follows: (I) any law, statute or ordinance, order action or regulations of the
Government of India. (II) Any kind of natural disaster and (III) Strikes acts of the Public
enemy, war, insurrections, riots, lockouts, sabotage.
21. Termination for default (Both foreign & indigenous): Default is said to have occurred:•If the supplier fails to deliver any or all of the services within the time period(s) specified in
the purchase order or any extension thereof granted by FVSc., AAU, Khanapara, Guwahati
•If the supplier fails to perform any other obligation(s) under the contract. If the vendor, in
either of the above circumstances, does not take remedial steps within a period of 30 days
after receipt of the default notice from FVSc., AAU, Khanapara, Guwahati (or takes longer
period in-spite of what FVSc., AAU, Khanapara, Guwahati may authorize in writing), FVSc.,
AAU, Khanapara, Guwahati, may terminate the contract/ purchase order in whole or in part
Page 7 of 38
and forfeit the EMD as applicable. In addition to above, FVSc., AAU, Khanapara, Guwahati,
may at its discretion also take the following actions:
FVSc., AAU, Khanapara, Guwahati, may procure, upon such terms and in such manner, as it
deems appropriate, goods similar to the undelivered items/products and the defaulting
supplier shall be liable to compensate FVSc., AAU, Khanapara, Guwahati, for any extra
expenditure involved towards goods and services obtained.
22. Applicable Law (Both foreign & indigenous):
(a) The contract shall be governed by the laws and procedures established by Govt. of India
and subject to exclusive jurisdiction of Competent Court and Forum in Guwahati, India only.
(b) Any dispute arising out of this purchase shall be referred to the Dean FVSc., AAU,
Khanapara, Guwahati, and if either of the parties hereto is dissatisfied with the decision, the
dispute shall be referred to the decision of an Arbitrator, who should be acceptable to both
the parties, to be appointed by the Dean, FVSc., AAU, Khanapara, Guwahati,. The decision
of such Arbitrator shall be final and binding on both the parties.
23. ADDITIONAL TERMS FOR IMPORTED GOODS
Following terms besides the fore mentioned terms will be applicable in case of foreign
purchases:
All Items including for imported items, the code should be strictly F.O.R., Khanapara,
Guwahati Campus of the University. Logistic expenditures towards Customs Duty, Clearing
Charges, Transportation cost etc. should be included in the rate and shown separately.
► In case of Irrevocable Letter of Credit the following points should maintain strictly:i)
MAWB No. & HAWB No. & Forwarder’s Name (To Whom Release order should be
issued by the negotiating bank) should immediately informed by the Principal through Fax to
the Buyer 10 (ten) days before dispatch of the equipment.
ii)
Bank Charges outside India, if required, will have to be borne by the Manufacturer/
Principal.
24. Rates: Quoted rates should be in CIF/CIP Kolkata terms and charges to be stated in the
following break-ups:
(a) Ex-works value
(b) + Documentation & Handling Charge, if any
(c) + Estimated Overseas Freight to be paid at actual against authentic documents and
monetary receipt
(d) + Estimated Overseas Insurance Charge to be paid at actual against authentic documents
and monetary receipt (In case the firm holds open insurance policy, the Insurance Certificate
relating to the consignment will have to be provided).
(e) Total CIP/CIF Kolkata value.
25. After Sales Service: In case of imported items, foreign manufacturing firms should
indicate facilities available for after sales service, detail address and contact number of their
local representative in India without which their offers are liable to be ignored.
26. Delivery:
(a) Delivery of goods at FVSc., AAU, Khanapara, Guwahati,, will have to be maximum
within 95(ninety-five) days from the date of issue of the Purchase Order.
(b) Delivery at Kolkata Airport only: As we do not have clearing agent in any other
Airport/Seaport, delivery is to be made only at Kolkata.
(c) While transshipment will be allowed, part shipment will not be allowed.
27. Payment:
(a). Above $10,000.00: By an irrevocable letter of Credit at CIF/CIP Kolkata value
negotiable through any overseas branch of State Bank of India/ with unrestricted provision.
(b) Below $10,000.00 by FDD as given below:
(i) 100% Payment Basis: On request by the supplier/s 100% payment by FDD will be made.
In this case on receipt of your Order Acknowledgement an FDD will be established for total
Page 8 of 38
ordered value, thereupon, a Xerox copy of the FDD will be sent to you which will enable you
to send the materials. On satisfactory receipt and acceptance of the materials or satisfactory
installation and commission of the equipment the Original FDD will be sent to you.
Note: Please note FDD/LC will not be opened unless and until Letter of Acknowledgement
in original is received at FVSc., AAU, Khanapara, Guwahati, directly from the principal
(Even in case of firms having subsidiary office in India). The Indian agents are therefore
advised to submit quotation after consultation with their respective principals).
28. Customs Duty: The Institute is generally exempted from payment of Customs Duty vide
GOI Notification No.51/96-Customs, dated 23.07.96, with Regn. No. TU/V/RG-CDE
(500)/2012, dated 14.09.2012. [CUSTOMS DUTY EXEMPTION CERTIFICATE WILL BE
MADE AVAILABLE BY THE INSTITUTE IN REGARD TO QUOTES IN FOREIGN
CURRENCY ONLY [ NOT AGAINST QUOTES MADE BY A FIRM IN INDIAN
CURRENCY, UNLESS THE CONCERNED FIRM IS A FOREIGN HOLDING
COMPANY WITH `FDI’ CERTIFICATE ISSUED BY THE MINISTRY OF FINANCE,
GOVT. OF INDIA ].
29. Agency Commission: The percentage of ex-works value to be paid to Indian agent in
equivalent to Indian currency as agency commission as applicable will have to be clearly
stated in the quotation wherever applicable.
30. Country of Origin: While Country of Origin Certificate will not be insisted, the same
however will have to be stated in the Original Invoice for payment through LoC.
31. LoC Amendment: LoC/FDD amendment charges due to mistake on the part of the
supplier, if any, will have to be borne by the supplier.
Sd/Dean,
Faculty of Vety. Science
Assam Agricultural University
Khanapara, Guwahati-22
Page 9 of 38
PAKAGE- II (PRINTING OF ‘VETCOL’)
TERMS AND CONDITION
1) The rate for each items should be quote/clearly and legibly. For all other terms &
Conditions please see instruction to bidder.
Sd/Dean,
FVSc., AAU, Khanapara,
Guwahati-22
TERMS & CONDITIONS
For
PACKAGE – III , IV& V
Quotation for establishing Rate Contract for supply of Pakage - III: Sports Goods.
Pakage -IV: Utensil & Package -V: Stationery items. in single bid system is hereby invited.
Bid Instructions:
i) Detailed desired Specifications of the Items are as given in PACKAGE –III, IV&V
ii) Quotations are to be submitted as per Format provided at ANNEXURE – I
i) Samples must be submitted in the box containing samples for Stationary Items. The
box must be marked with name of the supplier and NIQ reference.
Terms & Conditions:
01. Address of the firms submitting the quotation and the Officer, to whom the quotation is
addressed, must appear distinctly on the sealed cover. Further, on the outside of the
sealed cover, the following are to be written:
e.g. QUOTATION FOR SUPPLY OF STATIONERY [Plastic water bucket, Duplicating
paper ETC.] - NIQ NO. AAU/CVSc/ICAR-Dev/13-14/…… DATED……: . LAST
DATE OF SUBMISSION: 20.09.2013
02. Rates: Rates quoted should be on F.O.R., CVSc., AAU, Guwahati, on Door Delivery
basis. Rates are inclusive of all taxes.
03. Earnest Money : Refundable earnest money deposit of Rs. 15,000.00 through Demand
Draft or Fixed Deposit drawn in favour of The Dean, Faculty of Veterinary Science,
Assam Agril. University, Khanapara Guwahati, payable at Guwahati, will have to
accompany all quotations to be submitted. Quotations submitted without appropriate
amount of earnest money are likely to be rejected. The EMD of unsuccessful bidders
shall be returned after award of contract. All tenders received without EMD shall be
summarily rejected. EMD of the successful bidder will be released after delivery &
acceptance of goods by the various departments, CVSc., AAU, Khanapara.
04. Validity: Quoted rates must valid as rate contract for a minimum of one year i.e. 1st
April’13 to 31 st March’14.
05. Delivery: Unless otherwise stated delivery of goods at Faculty of Veterinary Science,
Assam Agril. University, Khanapara Guwahati, will have to be maximum within 15 days
from the date of issue of the Purchase Order. The firm failing to deliver goods as per
schedule may be debarred from further dealing with the Institute.
06. Brand: Brand/make is to be clearly stated against all quoted items.
Page 10 of 38
07. Sample: (a) Samples of the items (even for known brand of items) are to be provided
with the quotation, without which the quotation will not be accepted.
(b) Since samples are returnable, the same will have to be properly packed and
address of the vendor must be clearly written on the cover. The dully filled checklist as per Annexure II must be enclosed in the box containing samples and collected
back within three months from the last date of receipt of quotations /samples failing
which responsibility for any loss will be not taken by us.
08. VAT: Copy of VAT registration certificate of the firm, with the TIN number clearly
indicated therein, will have to accompany the quotation to be submitted. For a vendor
within the state of Assam, appropriate VAT only (to be deducted at source) will be
applicable. Municipality Registration Certificate is to be submitted alongwith the
quotations.
09. Dealer Certificates: Dealership certificate, wherever applicable, on the offered products
and Standard Technical Literature on each of the items offered will have to be enclosed
along with the quotation.
10. The quotation should be complete in all respects and duly signed wherever required.
Incomplete and unsigned offer will not be accepted.
11. The quotations are liable to be rejected if the fore going conditions are not complied with.
12. Risk Purchase Clause: If you fail to deliver the ordered goods within the maximum
delivery period specified in the purchase order, we may procure such item/s in such a
manner as it deemed appropriate. In the process of procuring similar goods if our institute
happens to incur any excess cost, your establishment is liable to pay the said excess cost.
13. Selection:
(a) Both quality and price will be taken into account while selecting items for
purchase.
(b) Although selection as per procedure is on lowest quoted basis from the technically
qualified vendors, vendor qualified for less than 100 (One hundred) items will not be
accepted for placing order, instead attempt will be made to get the said item/s supplied by
the selected vendors, starting from the next lowest quoted firm willing to supply the said
items as per the make quoted by them but in the rate quoted by the LQ vendor or as per
the make and price of the lowest quoted vendor.
14. Printed conditions of the firm, if any, will not be binding on us.
15. Late and delayed tender will not be considered.
16. In case any unscheduled holiday occurs on prescribed closing/opening date the next
working day shall be the prescribed date of closing.
17. Payment: Payment will be made after successful delivery and acceptance of goods at
FVSc., AAU, Guwahati, generally through A/c payee cheque. In case payment is to be
made by DD, the draft commission will be deducted from the bill amount. Part payment
for part delivery will not be allowed.
18. Default : Default is said to have occurred if the supplier fails to perform any
obligation(s) mentioned above and such default may result into forfeiture of EMD
submitted by the firm.
19. All disputes are subject to exclusive jurisdiction of Competent Court and Forum in
Guwahati, India only.
20. The acceptance of the quotation will rest solely with the Chairman, Purchase Committee,
who is not bound to accept the lowest quotation and reserves the right to himself to reject
or partially accept any or all the quotations received without assigning any reasons.
Sd/Dean,
FVSc., AAU, Khanapara,
Guwahati-22
Page 11 of 38
Annexure I
Format for Quotation for package I
Package No. (As appeared in NIT): _________
Sl.
No.
Sl.
No. in
NIT
Name of
the Item
Desired
Offered
Quoted AGST/CST Extra charges,
Specifications Specifications
Unit
etc.
if any, for
of NIT
Price*
delivery at
destination
Total
amount*
Other terms and conditions
Format for Package III, IV & V (Sports goods, Utensils & Stationery Items)
Sl.
No.
Sl.
No. in
NIT
Name of
the Item
Desired
Specifications of
NIT
Offered
Specifications
Quoted Unit
Price*
AGST/CST etc.
Total amount*
Other terms and
conditions
Page 12 of 38
PACKAGE – I
LIST OF LABORATORY INSTRUMENTS AND APPLIANCES TO BE PURCHASED FOR THE YEAR 2013-14
FACULTY OF VETERINARY SCIENCE, A.A.U., KHANAPARA, GUWAHATI-22
Sl.No.
1.
Name of the item
COLOR DOPLER ULTRASOUND
SCANNER
(For Veterinary application)
Specification
●Broadband Harmonics technology
2.
CONVEX ABDOMINAL
TRANSDUCER
● Image processing, speckle reductive
● Spatial Compound Imaging
● Image Optimizer
● Directional eFLOW
● Color Flow , Power Flow and spectral
Doppler
● M-Mode
● Extended Field of View
●Tapezoidal Imaging
● Environmentally Friencly
●Compact
● With one convex abdominal and one
Trans rectal transducer for veterinary
application
Abdominal exams in large animals, such horses and cattle and large dogs. Frequency Range: 3.87.5 MHz/Scan Angle: 60 degrees/Radius:60mm
3.
PHASED ARRAY HARMONIC
CARDIAC TRANSDUCER
High Frequency Cardiology transducer for smaller patients. Continuous wave and pulsed wave
Doppler
4.
HIGH FREQUENCY LINEAR
TRANSDUCER
Linear high frequency (13 MHz) transducer for superficial imaging. Hemispheric sound
Technology and Pixel Focus technologies.
Page 13 of 38
5.
REPRODUCTIVE FINGERGRIP
TRANSDUCER WITH SAGITTAL
VIEW
For scanning in bovine and equine applications
For scanning
Frequency Range: 5-10 MHz
Scan Angle ;65 degree
Radius: 20 degrees
6.
MULTIPURPOSE RIGID DIAGNOSTIC
SET WITH FLEXIBLE BRONCHOFIBROSCOPY AND
DOCUMENTATION
SYSTEM FOR SMALL ANIMAL
(Must be compatible with KARL STORZ
Video-gastroscopy set)
Rigid Diagnostic Set
Universal telescope for small animal practice, diameter 2.7 mm , length 18cm, color code:red
●Examination and Protection Sheath
●Trocar, size 3.5 mm, color code: green with pyramidal tip 30114 G1 Cannula, length 5 cm,with
Luer-Lock connector
●Trocar , size 4.5 mm, color code : green, with pyramidal tip 30114 G1 Cannula, length 5 cm
with LUER- Lock connector
●Biopsy Forceps 1.7 mm, working length 15 cm round cupped jaws with working length 15 cm
● Biopsy & grasping Forceps 1.5 mm, round cupped jaws
●Operative Sheath, outer diameter 4.5 Fr.with built- in instruments channel of 5 Fr., two luer
lock adaptor
●Flexible Biopsy Forceps 5 Fr. Double action jaw oval double spoons
●Fleixble grasping Forceps of 5 Fr. With double action jaws
●Stone Basket of 5 Fr.with length 60 cm
●Unipolar Polypectomy Snare of 5 Fr.with working length 32 cm
●Flexible needle with outertube outerdiameter al all 1.5 mm length
●Earcurette size small of 5 Fr. With working length 30 cm
●Earcurette size large of working length 30 cm for passing through distal tip of sheath
●Otex brush , 5 Charr
●High flow examination sheath with rotatable stopcock, automatic
●Sharp Obturator
●Blunt Obturator
●BLAKESLEY Forceps, straight size 1
●Probe. Length of hook: 2 mm
●Osteotome, straight, 4mm
●Curette, size 0
●Handburr, with sleev, ǿ2.7mm
Page 14 of 38
Length 12 cm
●Handburr with sleev ǿ 3.5 mm
●Inflow Cannula with sharp obturator
with stopcock
Documentation System
KARL STORZ AIDA ® compact NEO standard, HD documentation system for digital storage of still images, video
sequences and audio files Power supply : 115/230 VAC, 50/60 Hz Signal Input:
HD-SDI, SD-SDI, Y/C, Composite, RGBs consisting of : 200461120-D AIDA control NEO with integrated DVD
writer 20040402-22
AIDA compact NEO V3.1 Software mit Communication Interfaces (DICOM & HL7) 20040240US USB Silicone
Keyboard with Touchpad , US 20040577-V02 AIDA compact HD Frame Grabber Board 2x 20221070 Connecting
Cable 20040087 Connecting Cable , Mini-DIN Plug to BNC socket 536 MK BNC/BNC Video Cable , length 200cm
400A Mains Cord
Flat Monitor for use with documentation system 14"
Bronchoscopy Set
●Broncho-Fiberscope with Instrument channel: 2.3 mm: Direction of view: 0º: Angle of view: 110º: Working length
: 85 cm; O.D. : 52 mm: suction
valve . Following accessories should be included: Case . Leakage Tester, Pressure Compensation Cap, cleaning
Bruch , Rubber Lip Valve, disposable , package of 20, Cleaning Adapter for valve housing , Double Stopcock
Adaptor
●Bopsy Forceps , double spoon roung jaws , diameter 1.7 mm,length 120cmm
●Grasping Forceps, double action jaws , flexible 1.7 mm , length 120cm
●Suction catheter,1.7mm , with connector 10479 A
●Brush for cytology with handle 13266 H and tube 60007SL, working length 100cm
Light cable & camera accessories for connecting to existing light
source and camera system
Adaptor to connect standard KARL STORZ Light Cable (not495NCS) to KARL STORZ Xenon
100 (20132520) light source and to Gastro Pack (25043020)
●Fiber Optic Light Cable , extremely heat resistant , size 3.5 mm length 300 cm
●Vet C-Mount Camera Head, Karl Storz Endovision Veterinary, Video Camera, Color System
PAL
●C-MOUNT lens, soakable, focal length f=38mm
Tubings for connecting to existing suction & irrigation unit (for ear
Page 15 of 38
and urethral flushing & suction
7.
Clinical Chemistry Analyzer (semi
automatic)
Handle for irrigation and suction , autoclavable , for use with tubing set 69811 in conjuction with
5mm suction-irrigation tubes and catheters any size with LUER-Lock connection.
●Instrument tubing set for use with Suction & Irrigation Unit
●Silicon tubing set irrigation –suction from unit bottles, for use with Suction & Irrigation unit
and Otoscope
Light source:
●Quartz-halogen lamp 12V-20V
Wavelength Range:
●Automatic by 12 positions filter-wheel
●6 standard interference
Filters:340,405, 505, 546, 578 and 620nm;
●6 positions for optional filters.
Detector
●Photo diode(320-1000nm)
Blanking
●Automatic zero setting
Operator interface
●Membrane keyboard ,for direct function and alpha-numeric entry;
●Optional external keyboard;
●High contrast graphical LCD display;
●Real time clock, 24 hours system
Measurement procedures
●Kenetic, with linearity check:
●Kenetic ,with linearity check and sample slope blank;
●Two pointi,with or without
regent blank;
●End point, with or without reagent blank;
●Bichromatic end point , with or without reagent blank;
●End point ,with sample blank and with or without reagent blank
Calibration
●Factor ,one-point, two-point and multi-point;
Page 16 of 38
8.
Small Animal Operation Table
(Hydraulic)
9.
Small Animal Examination Table
10.
Centrifuge machine
11.
Digital Electronic Balance
●Automatic on 1 standard (linear mode);
●Automatic on up to 10 standards(non linear mode)
Quality control
●Two control per test;
1. The small animal examination table must be specially designed for small animals like canine,
feline etc with 1 section table with central drain as standard.
2. Size : 60 inches X 22 inches
3.Height: 42 inches
4.Auto floor locks & 360О rotation
5. Suitable for examination as well as for operation of abdominal, renal, pelvic region , head ,
extremities etc.
6. Base and column covered with stainless steel fitting with auto floor locking’ and table made of
304 SS satin finish
7. Detachable leg section with standard accessories and mattress
8. Six sets of animal straps with concealed type j hooks
9. IV Stand with draw type instrument tray of SS min size 18 inch X 12 inch
10.The Offered unit must have min. 5 similar installations in Govt. institute.
11. The tenderer or the manufacturer must be EN 13485 certified for medical quality
1. The small animal examination table must be specially designed for small animals
2.Size: 48-60 inches x 22 inches
3. Height:42 inches
4. Stainless steel top finished
5.Metalic four legged stand
6.Provision of side hooks for securing the animal
Laboratory centrifuge with speed regulator. Digital speed indicator, maximum speed 5000 rpm.
Swingout roto head. 12x15 ml, 8x15 ml angle rotor head.
Capacity : 220 g Readability : 0.1 mg
Repeatability: +/- 0. 1Mg
Linearity: +/-0.3 mg
Pan size: 80mm dia
Response time : 2-3 sec
Page 17 of 38
Display : back light LCD display
Calibration: Motorised Internal Calibration/
12.
13.
Small Animal Anaesthesia
Machine
Units of Measure: g,mg,ct,GN,mo,oz,dwt etc.
Operating Temp.:15 deg.C to 35 deg.C.
Tare range: Upto 220gm
Wind Draft Shield: Stainless steel Pan and glass draft shield with flexible configuration.
Power supply : 220-240 V, AC. 50/60 HZ
1. The anesthesia machine must be specially designed for small animals like canine , feline etc
with muzzle mask of small and medium size to be provided as standard,
2. Re-breathing bags with two litre capacity must be provided for vet purpose
3. The offered small animal anesthesia machine must have the following features:
1) Table top: Stainless steel
2) Cylinder yokes: Gas specific yokes and gauges with clamping bars duel for oxygen and nitrous
oxide
3) Mobile: Four large diameter anti static castor wheels with ball bearings, front castors have
brakes
4) Pressure Gauges : Two each for Oxygen and Nitrous Oxide
5)Regulators: For higher efficiency and reliability two each for oxygen and nitrous oxide
6) Non-return cum pressure release valve: Minimizes risk of back flow of gases, blows
off when pressure exceeds 200cm H2O
7) Oxygen failure warning :devices: Pneumatic device which activates audible alarm (for
minimum 10 sec.)when oxygen supply pressure falls to 205 kPa
8) Vapourizers:The system should be state of art anesthesia machine for canine use and should
have future up gradation for large animal and must accommodate large animal lung bellows in
future up gradation
9) Flow meters: Long
(upto 260 mm ) rotating bobbin flow meters calibrated in double /triple scale , antistatic and noninterchangeable (Oxygen -100 ml/min to 10 liters/min: Nitrous Oxide-100 ml/min to 12
liters/min)Oxygen being a preferred gas kept on downstream of other gas
10) Oxygen flush: Emergency
oxygen flush outlet button at
Page 18 of 38
table level(36-50 lit/min)
11) Breathing circuit: Standard
magill’s circuit
12)Nitrous cut-off: Provide nitrous
cut off system prevents risk of
administering 100% nitrous oxide
in absence of oxygen pressure
13)Should have the facility for
Plenum type ether /goldman type
halothane vaporizer and should
have built in space for extra vaporizes
14)Should have drawer space to
keep the accessories
15)The unit should have all the
alarms and must be ISI marked
16)High pressure Nylon ribbed
tubing with non-interchangeable
end fitting
17)2 cylinder kits with 2 litre rebreathing bags
18) Catheter mount with tube
face/muzzle mask for canine ,
bovine
19)The offered unit must have min 5
similar installations in govt. of
which self attested copies to be
attached along with the tender
quoted
20)The tenderer or the manufacturer
must be EN 13485 certified for
medical quality
Page 19 of 38
14.
Hot air oven
Digitally controlled Inner size W.D.H.
(455 x 455 x 605) mm
Capacity-125 liter
Volume /capacity: 20 liters, Temp, rance: ambient + 5°C to 100°C, accuracy:
±0.1°C at 50°C.digital PID auto tuning controller for precise temperature control.
Unique CLS (Custom Logical Safe) control system . Bath material: internal: stainless steel,
eternal : dopuble painted and baked steel, electronic programmable timer for setting start and stop
automatically , audio-visual alarm built in for over temperature protection.
Temperature display in °C , drain valve for easy cleaning.
Complete with spring
wire rack and gable cover
, operated on 220V/50Hz
ISO 9000 Series
Certification & CE
CERTIFIED
Range of section thickness: 0.5µm to 99µm
Horizontal Specimen Advance: 28mm
Vertical Stroke : 60mm
Advance for trimming: 1-99µm adjustable.
The equipment is supplied complete
with-Casette holder, Knife holder base, standard knife holder, object orientation unit,
Section waste tray , Microtome Knife 15cm
15.
Water bath (digital control)
16.
Precision rotary
Microtome
17.
Disposable Blade Holder
Suitable for holding low or high Profile knife, suitable for all types of Rotary Microtome
18.
Disposable Blade pack of
50 blades
19.
Tissue Floatation Bath
High carbon steel, diamond sharp edge, packed in a unique dispenser,
Scientifically designed to take one after the other knife automatically, Low Profile
High Perofil
For precise control of different
samples at constant temperature. It is ideal for tissue culture , enzyme reactions fermentations
tissue section processing etc. Its round , double walled, single piece inner and outer chambers are
made of aluminium , Inside black and outer surface finished in powder paint, with wide enough
rim for drying the wet slides .Temperature to be controlled by IMPORTED make capillary type
thermostat from ambient to 700 C with an accuracy of ±2 0c
Page 20 of 38
20.
Block Holder
Specimen Holder used for holding the wax block for taking sections on the microtome
Size:(dia) 37mm 25mm 20mm
21.
Tissue Embedding Moulds
22.
Digital electro cardiogram
23.
Horizontal laminar flow
Made from Stainless Steel, Very Convenient and simplified method for the preparation and
taking of tissue section. Eliminates need for trimming of blocks
Size: a.L X W X D
b.16 x 16 x 12m c. 22 x 22 x 12mm
Functional Characteristics:
●Single Key operation
●Simultaneous acquisition of 12 leads
●Memor -10 second for each lead
●Printing format selectable to single or double or any desired lead/leads
●Digital Filters for elimination of muscle tremors, power line and base line disturbs
● Power supply by mains and by build in NiMH batteries with high capacity and fast charge time
●Based on a Rise Processor for signal processing
● Truly portable
Standard Accessories:
● Patient Cable(10 lead)
● Earth Cable
● Charger cum power pack
● Clip-on Limb electrodes
● Suction cup-chest electrodes
● Paper Roll 50mm X 20mt
● Cardi Jelly bottle
● User Manual
With ss table top wood melanine body construction, Bunsen burner with provision for gas
connection EU 13 HEPA filter and EU-6 per filter. Non reflecting safety glass (MSG) complete
with HEPA filter 0.25 microne
Size-4' X 2' X 4' supply motor blower assembly Antivibration and flexible connector. Adjustible
floor aligner .UV light florescent
light air/gas regulator. Pressure monitor DOP rating hot and cold A 99.5 % .Built in UV tube
work on 220/230 volt AC
Page 21 of 38
size 4' X 2' X 2
24.
Bacteriological Incubator
25.
Hemocytometer
26.
Incinerator for waste disposal
27.
Dumper placer with Animal Dead
Body Bin
Temp. range up to 80ОC controlled by ‘IMPORTED’ Thermostat. Door gasket made of synthetic
Rubber compound instead of Asbestos. Inner chamber made of S. Steel (304 Grade) with 2
shelves. Size 455x455x605mm
Make Merinfield , Germany
It has 50 kg capacity and will burn at around 25kgs per hour. The unit is a top loading design and
has heavy duty refractory cement lining for maximum heat retention. This unit operates at over
1100 deg C in the primary chamber to ensure complete combustion and a complete re-burn of
any smoke and emissions.
PRIMARY CHAMBER
Heavy –duty steel casing
High quality refractory lining and insulation
.16 cubic meter capacity chamber
Large full size top load door and liquid retention sill
1 x oil fired ignition burner operated on/off
1100+ deg C operating temperature
CHIMNEY
1.52m Heavy-duty stainless steel stack Cap
CONTROL PANEL
Control of 1 burner
Timer control 0-12 hours
Integral fan timer control
Constructed on TATA ACE with 5 gear
Capacity: 1 No. Animal Dead Body Bin Size
5´ x 2.5″ x 2.5″
Hydraulic Cylinder: 2 Nos. 63 mm bore & 40 mm shaft
(for lifting & Tippin)
Lifting Capacity: 1 ton
Outrigger/stabilizer: 1 No. Hydraulically operated (Manually Pullout type)
Control Volume: 1 no. 2 spool directional control valve
Safety Device: Overload Protection Valve, Load Holding Valve
Page 22 of 38
Hydraulic Pump: Power pack (Battery operated pump)
Hydraulic Tank Capacity: 15-20 liters
Hydraulic Oil: Antiwar Grade 68 castrol
Floor Sheet: 2mm MS sheet
Boom Arms: Cold formed Box section of MS 75 x 40 x 4 mm
Boom Cross Bar: Outer diameter 48 x 5 mm MS pipe
Lifting Chain: 8 mm thick MS Tested Chain
Tipping Hook: Manually Operated
Power Source: Vehicle Battery
5-50μl, 50-200μl, 200-1000μl
28.
Variable Miocro pipettes
29.
Biomedical Waste Disposal Bin set In red, blue yellow and black colour
of 4 bins
Foot operated with lid
Bin fitted in steel frame with paddle operation system
Capacity of each bin 25 and 60 liters
Each bin with biohazard monogram
Virgin plastic non chlorinated specially designed biodegradable waste collection bags , 30 micron
Bio hazardous disposable bags
thickness, pucture and leakage proof , yeallow,red ,blue and black colour
Capacity : 25 and 60 liters
Needle and Syringe destroyer
Manually operated syringe & needle destroyer
Puncture proof & destroys needles & syringe of any size both in single action.
Unit combines a high grade stainless steel with lid and disposed off as per CPCB norms.
Spring used in hub Cutter made of SS wire of hardened & tampered ISI-4454 of 2001.
No use of battery of Electric power.
Maximum cycle time per needle to be cut is 3 to 4 seconds for 18 to 28 gauge dia. /10-25mm
length needles.
Sharp Container
This container is designed for Bio-Medical Waste sharp collection such as syringe, blades etc.
Flask shape for ease and convenience.
Fits discreetly into wall or instrument Trolley.
Capacity:3 liters
Horizontal Autoclave
Construction
The unit outer chamber , inner chamber , Broiler , Lid and Jacket-all made of 304 grade stainless
steel. For controlling sterilization cycle, as three way valve or a multiport valve-made of S.S. is
30.
31.
32.
Page 23 of 38
33.
Portable Centrifuge Machin
34.
Inverter
35.
A.C.
36.
A.C.
37.
Voltage Stabilizer – 1 KVA to 10
KVA
provided. It is supplied complete with vacuum breaker, water level indicator, steam trap an
automatic pressure control switch. The whole unit is mounted on a robust tabblar stand.
Capacity: 100 liters. Operatable on Single Phase, 230 volts A.C. supply.
Working Pressure:
The pressure inside the chamber is variable from 5 psi to 30 psi.
But the normal recommended pressure for sterilization process is 15 psi.
Working Temperature : 121°C
Hydrotest Pressure: 2.5 kgf/cm.sq.g(35 psi.)
Laboratory Centrifuge with stepless control , digital speed meter, maximum speed 5000 rpm,
Swing out head rotor , metal carrier 8 x 15 mm
1400 VA / Voltage on Mains : 100 ~ 265 VAC / Voltage on Battery : 225 ~ 235 VAC / Wave
Form : Pure Sine Wave / Frequency on Battery : 50 Hz +/- 0.5% / Overload Indication : 110 %
for 60 Seconds. Indication via Led & Audible Alarm / Input Voltage Range : 100 ~ 265 V /
Multiple Short Circuit Protection Provided / Surge Protection ,Mains Low & High Input Voltage
/ Battery : 150 AH X 12 V X 2 No / Trolley
Installation and electrical wiring ( for each inverter)
2 Ton Capacity, Star Rating 3 Star, 3M Micro Protection Filter, Monsoon comfort
Dual protection filter, Auto clean
1.5 Ton Capacity
Star Rating 5 Star, 3M Micro Protection Filter, Monsoon comfort, Dual protection filter
Auto clean
1 KVA / Input Voltage Range – 140 ~ 280V / Output Voltage – 200 ~ 240V +/- 2% / Overload &
Short Circuit Protection Auto Trip in case of High Voltage / Cabinet Made of CRC Sheet with
Powder Coating Paint / Warranty – 1 Year
2 KVA / Input Voltage Range – 140 ~ 280V / Output Voltage – 200 ~ 240V +/- 2% / Overload &
Short Circuit Protection Auto Trip in case of High Voltage / Cabinet Made of CRC Sheet with
Powder Coating Paint / Warranty – 1 Year
3 KVA / Input Voltage Range – 140 ~ 280V / Output Voltage – 200 ~ 240V +/- 2% / Overload &
Short Circuit Protection Auto Trip in case of High Voltage / Cabinet Made of CRC Sheet with
Powder Coating Paint / Warranty – 1 Year
Page 24 of 38
38.
39.
5 KVA / Input Voltage Range – 140 ~ 280V / Output Voltage – 200 ~ 240V +/- 2% / Overload &
Short Circuit Protection Auto Trip in case of High Voltage / Cabinet Made of CRC Sheet with
Powder Coating Paint / Warranty – 1 Year
CO2 Incubator: seamless and
Temperature Range: 4°C above ambient to 50°C
fanless chamber designed for stem Temperature Control facility:± 0.1°C
cell and IVF application which fits Temperature Stability: ± 0.1°C
into IVF workstations and under
Temperature Uniformity: ≤ ± 0.3°C
laminar flow hoods for complete
CO2 Gas control range should have: 0.2 – 20%
minimization of contamination risk CO2 Gas Control should have: ± 0.1%
with RS-232, 25mm access port
CO2 Gas Stability should have: ± 0.2%
and 1-19% Oxygen control option CO2 Gas Uniformity should have: ± 0.1%
CO2 Gas Connections: 6 mm tubing with HEPA Filtration
N. B.: Equipment under this
schedule should conform to BIS/ Humidity Reservoir: 2.5 Liters volume of removable stainless pan
RH (@37°C) : Upto 95%
ISO 9001:2008 certification
standards, a proof of which shall Perforated Shelves: 2 to 4 position to faster recoveries
have to be submitted along with Chamber Dimensions: 23.3 x 20.8” x 29.2 cm (W x D x H) or more
External Dimensions: 31.3 x 28.5 x 29.2 cm (W x D x H) or more
the bid document.]
Electrical Voltage: 220-240V, 50/60 Hz
Technical literature, brochures
Net Weight: 13 Kg or more
and all other relevant
Certification : CE Certified
information supporting the bid
Heating Profile: Six-sided , Direct Heating, Fanless Design
must accompany the bid
CO2 Sensor: Infra Red (IR)
document
Digital Display : LED, Temperature and CO2 Level
Accessories : Dishes, Plates, Flasks , CO2 Cylinder, Dual Stage Regulator and Voltage Stabilizer
should have to be supplied along with the Incubator.
Mini Incubator
·
·
·
·
·
·
·
·
Ideal for microbiology or hematology applications
Temperature range ambient +5° to 60° C
Digital control
Corrosion resistant chamber
Three shelf levels
Door with large viewing area
Pilot light to indicate heating
220 - 230V~, 50/60 Hz
Page 25 of 38
·
·
·
Light weight
Volume 80L
Warranty : 2 years (Min.)
40.
Dry Bath Incubator
·
·
·
·
·
·
·
·
·
·
·
·
Temperature range -10° to 100° C ( Irrespective of external temperature)
Microprocessor controlled
Minimum set time 1 min
Heating and cooling module should be replaceable for different tube size.
LCD display
Temperature accuracy .5 C
Fast ramping
Cooling: Peltier based
Programmable
Signal after completion of incubation
Light weight
Warranty : 2 years (Min.)
41.
Electrophoresis system
·
·
·
·
·
·
·
·
·
·
·
·
42.
Refrigerated centrifuge
·
·
·
·
·
Unit dimensions (W × L × H) 21.5 × 33.5 × 7 cm
Gel size (W × L) 15 × 15 cm
Buffer volume 1200 ml
Buffer re-circulation ports 2
Maximum sample capacity 120
Combs 2
Comb thickness 1, 1.5 or 2 mm
Comb throughput 1 to 30 samples
Comb slots 4
Migration distance between comb slots 3.5 cm
Recommended running voltage 100 to 125 V
Warranty : 2 years (Min.)
(220-240 V, 50/60 Hz)
Refrigerated table top centrifuge
speed range up to 18.000 rpm
Various angle and swing-out rotors should be available.(1.5ml,50ml,Microtiter plate)
Maximum capacity of 4 x 400 ml down to micro tubes with different adapters in the same
Page 26 of 38
·
·
·
·
·
·
·
·
·
·
43.
Homogenizer
·
·
·
·
·
·
·
·
·
·
44.
OSMOMETER
·
·
·
·
·
·
·
·
·
bucket
Micro processer based controls for speed or gravitational field, time and temperature
Active rotor identification
Stainless steel bowl
Imbalance switch
Emergency lid lock release
Easy lid opening
Motorized lid lock
Possibility of precooling the rotors during standstill Refrigerant CFC-free.
Produced according to national and international safety regulations.
Warranty : 3 years (Min.)
Homogenization of at least 3 samples in regular snap-cap microcentrifuge tubes(1.5ml
to 2ml)
Application in DNA, RNA and protein isolation
Prevention of sample cross-contamination.
Should be compatible with Animal, Plant and Microbial Samples.
Compatible with chilled and frozen samples
Compatible with different types beads supplies by other vendors.
Sample size: minimum of .3g
Prevention of heat build-up during homogenization.
Sufficient amount of different beads, scoops, and tubes should be supplied.
Warranty:
Fully automatic digital osmometer for determination of low concentration of solutes in
biological fluids
Takes sample in microliter volume
LED readout screen
Triple-point calibration verification
Minimum bench space
Compatible with consumable from other vendors.
Range: At least 100 - 500 m Osm/kg (Larger range will be preferred)
Power requirements: 115 V, 50/60 Hz.
Warranty: 2 years (Min.)
Page 27 of 38
45.
Refrigerated/Heating Circulator
Water Bath
·
·
·
·
·
·
·
46.
Cooled incubator
·
·
·
·
·
·
·
·
·
·
·
·
47.
Temperature range -10° to 100° C (irrespective of ambient temperature)
Efficient for all types of electrophoresis and tank transfer application.
Minimum level of deviation from set value
Microprocessor controlled
Should occupy minimum laboratory space
Minimum of 5L capacity
Warranty: 2 years (Min.)
Should operate on 220V/50HZ
Application: Protein crystallization (Supportive documents to be provided)
Microprocessor PID controlled.
Simple calibration and auto tuning function
Digital timer
The system should have convenient sample monitoring without affecting chamber
temperature. Detachable shelves
Round corner chamber
Capacity: Minimum 123 litre
Temperature range: Minimum 0° to 60°C (larger range will be preferred)
CFC free
Minimum vibration
Warranty : 3 years (Min.)
Chemi Doc
·
·
·
·
·
·
·
·
·
·
Capable of handling Chemiluminescence,Fluorescence,Colorimetry/densitometry,Gel
documentation
Detector :Supercooled CCD
Filter position :3 (at least)
Broad dye selection range
Cooling system: Peltier
Capable of autofocus
Proper software for analysis of blots.
Operating voltage: 110/115/230 V AC nominal
Proper power back up
Warranty :
Page 28 of 38
48.
Micromanipulator
●
(Without Microscope)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Fully capable of handling IVF; Intracytoplasmic sperm injection;Injection of oocytes and
adherent cells; Injection of DNA ,RNA and protein;Embryology work
Manipulator for moving and positioning the injection needles in the field of view of the
microscope.
Hydraulic manual Injector to supply the intended injection.
Manipulator and the injector should have the functionality to communicate with each
other
Capable of holding the cell / embryo precisely in position using air vacuum.
Should be flexible enough to be installed, adapted and used on left or right side of all
commonly used microscopes (e.g., inverted microscopes, upright microscopes and
stereozoom microscopes).
Facility for both for filling the microinjection capillaries with minute amounts of liquids and
also for recovering surplus solution from the capillary.
Should have dynamic control in all three (X,Y& Z) axes.
Coarse and fine control options for manipulator movements.
Resolution of at least approx. 10 micron or better.
Adjustable injection angles (wider range shall be prefered)
Biological compatibility ensured by embryo-tested oil
Compatible with Nikon TS100-F or Leica DM IL LED or Nikon SMZ 100 Microscope
platforms
Accessories for attachment with the Microscopes.
Capable of maintaining temperature.
Warranty :
Sd/(R.N. Goswami )
Dean
Faculty of Vety. Science, A.A.U
Khanapara, Guwahati-122
Page 29 of 38
PACKAGE-II
Sealed quotation are invited from reputed Registered firms/Dealers for printing of
MAGAZINE “VETCOL”. for the year 2013-14.
NAME OF ARTICLES FOR PRINTING OF MAGAZINE “VETCOL”
Sl. No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14
15.
16.
17.
18.
19.
Name of articles with Specification
D.T.P. Composing per page
Plate making per format
Processing per format
Text printing per format
Text paper Map litho 21.3 kg D/D
Text paper white print per Ream 14.8 kg.
Cover printing per colour
Cover scanning charges
Cover paper300 GSM Art paper both side multi colour
34.6 kg per ream.
Cover lamination per cover (Matte with spot UV Coated
Lamination L/S
Cover plate making per colour
Colour photo scanning m/m size per photo
Colour photo printing per 4 pages
Colour and B/W photo paper 130 GSM Art paper both
side multi colour 24 kg per ream
B/W photo processing per page
B/W photo printing per format
B/W photo plate making per format
Binding charges per Magazine
Colour photo processing per format
Quantity
220 pages
25 Nos.
25 Nos.
25 Nos
32 Reams
-----------4/5 Nos.
400/450 sq. inch.
1.25 Ream
1000 Nos.
4/5 Nos
20/25 Nos.
8/9 Nos.
5 Reams
80 page
10 Nos.
10 Nos.
1000 Nos.
10 Nos.
Sd/(R.N. Goswami )
Dean
Faculty of Vety. Science
Assam Agricultural University
Khanapara, Guwahati-122
Page 30 of 38
PACKAGE-III
LIST OF SPORTS GOODS TO BE PURCHASED FOR THE YEAR 2013-14
FACULTY OF VETERINARY SCIENCE, A.A.U., KHANAPARA, GUWAHATI-22
Sl. No
1.
Name of Sports Goods
Badminton Racket (All Steel)
2.
Badminton Shuttles
3.
Badminton Net – 4 side tape
4.
Cricket Practice Ball
5.
Cricket Match Ball
6.
Cricket Practice Bat
7.
Cricket Match Bat (English Willow)
8.
Cricket Wicket Keeping Gloves
9.
Cricket Batting Gloves
10.
Cricket Batting Pad
11.
12.
13.
14.
Cricket Abdominal Guard
Cricket Stamp (Wooden)
Cricket Bails
Cricket Thigh Pad
15.
Cricket Batting Leg Guard
16.
Cricket Wicket Keeping Pad
17.
18.
Cricket Score Book
Cricket Practice Net
19.
Cricket Mat
(100 innings)
Specification
a) Melonsilva
b) Optima
c) Silver Power Post
d)Silver Flexican
a) Rocket
b) Ashoka
c) Arrow flight
a) Cotton
b) Nylon
a) Ved
b) Club
c) Bullet
a) BDM
b)Ambassador
c) S.G.
d) Samrat
a) Balbro
b) Kashmiri Willow
c)BDM
d) Dynamic
a) Master Blaster
b) Amazer
c) BDM
d) Balbro
a) Majestic
b) BDM
a) Majestic (leather)
b) Panasonic
a) Majestic
b) BDM
---------------a) Majestic
b) Premier
a) Rebok
b) Majestic
a) Majestic
b) BDM
c) Rebok
d) Primex
------a) Cotton : 72 X 10
b) Nylon : 72 X 10
a) Size : 66’ X 8’ Coir
b) Size : 33’ X 8’ Coir
Page 31 of 38
20.
Tennis Ball
21.
T.T. Bat
22.
23.
T.T. Net (Nylon)
T. T. Ball
24.
Basket Ball
25.
26.
T.T. Clamp (Stand)
Basket Ball Net
27.
28.
Basket Ball Ring (Iron)
Football
29.
Football Goal Net
30.
Football Boot
31.
32.
33.
34.
35.
36.
Football Stocking
Football Socks
Football Kneecap
Football Jercy
Football Half pant
Volleyball Net (4 side tape)
37.
Volley Ball
38.
Volley Ball Jercy (Cotton)
39.
40.
41.
42.
Tracksuit
Sporting
Wrist Band
Carrom Board (Best quality)
43.
44.
45.
Carrom Men
Carrom Striker
Chess Board
46.
47.
48.
49.
50.
51.
Volleyball Kneecap (Paded)
Socks (Nylon)
T.T. Board
Weight Lifting Belt
Weight Lifting Shoe
Skipping Rope
a) Cosco
b) Wilson
a) Pesco
b) Steg
c) Butterfly
a) Steg
b) Jonex
c) Shield
a) Cosco
b) Jonex
c) Nivia
-----a) Cotton
b) Nylon
-----a) Jonex
b) Cosco
c) Nivia
a) Cotton
b) Nylon
a) Nivia
b) Bhogals
--------------------Cotton
Cotton
a) Cotton
b) Nylon
a) Cosco
b) Jonex
c) Nivia
a) Full sleves
b) Half sleves
Best quality
Best quality
-------a) Size : 36” X 36”
b) Size : 34” X 34”
Wooden
Plastic
a) Wooden
b) Plastic
-------------¾ Champion
Leather
Leather
Adjustable
Page 32 of 38
52.
Dumbell
53.
Weight Lifting Bar
54.
55.
56.
57.
Bumbell Rod
Stop Watch
Olympic Weight Lifting Set
Barbel Plate
58.
59.
Push Up Stand
Weight Lifting Bar
60.
61.
62.
63.
64.
65.
66.
67.
68.
69.
Cycle
Dirt
Spike Shoe
Sporting for Athletics
Measuring Tape
Whistle
Dumbell (Fixed)
Dumbell (Flexible)
Mirror
Mirror with stand
70.
71.
72.
73.
74.
75.
76.
77.
Multifunction bench
Incline/decline/flat
Carpet
Gym. Mat
Weight Rack
Shoulder press
Iron Bar
Dumbell Bar
Olympic Plate
78.
79.
Trade Mill
Javelin
80.
Half pant for Gymnasium
81.
Medal (With emblem and ribbon)
a) 15 lbs
b) 30 lbs
a)
3 feet
b)
4 feet
------Electronic
Rubber coted in Kg.
Barbell Plate :
a) 25 Kg.
b) 20 Kg.
c) 15 Kg.
d) 12.5 Kg.
e) 10 Kg.
f) 7.5 Kg.
g) 5 Kg.
h) 2.5 Kg.
i) 2 Kg.
j) 1 Kg.
k) ½ Kg.
Push Up Stand
a) 5 feet
b) 3 feet
Cycle Exercise
Wooden
---------Half sleeves
50 Meters
Plastic/Steel
Fixed 2 Kg & 3Kg.
(Flexible)
3 feet X 6 feet
4 feet x 3 feet
For chest exercise
27 feet x 20 feet
1mm x 1mm x 25mm
Indian
80 kg.
6 feet
For biceps, triceps, deltoids exercises
4x10 kg
4x5 kg
4x2.5 kg
Trade Mill
a) Aluminium
b) Bamboo
a) Cotton
b) T. Cotton
a) Gold
Page 33 of 38
82.
Plain Cup (SS)
83.
Shield (Ply with steel)
84.
Design Memento
b) Silver
c) Bronze
a) No, 13
b) No. 12
c) No. 11
d) No. 10
e) No. 9
f) No. 8
g) No. 7
h) No. 6
i) No. 5
j) No. 4
k) No. 3
a) 4” X 5”
b) 5” X 6”
c) 7” X 8”
d) 8” X 10”
e) 10” X 13”
f) 13” X 16”
a) No. 2
b) No. 3
c) No. 4
d) No. 5
e) No. 6
f) No. 7
g) No. 8
h) No. 9
Sd/(R.N.Goswami)
Dean
Faculty Of Vety. Science
Assam Agril. University
Khanapara, Guwahati-781 022
Page 34 of 38
PACKAGE-IV
LIST OF UTENSIL TO BE PURCHASED FOR THE YEAR 2013-14
FACULTY OF VETERINARY SCIENCE, A.A.U., KHANAPARA, GUWAHATI-22
Sl. No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
11.
12.
13.
14.
15.
16.
17.
18,
19.
20.
21.
22
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
Name of Utensil
SS. Dish
S.S. Bowel
S.S. Glass
Iron Kerahi
Iron Kerahi
Iron Kerahi
Iron Kerahi
Iron Kerahi
Aluminum Saucepan (Lid with handle)
Aluminum Rice Washing Bowel
S.S. Tea Flask
S.S. Tea Flask
Aluminum Kettle
Bothi
Iron Tawa
S.S. Distribution Spoon
Iron Jagra
Iron Khanti
Aluminum Gumla
S.S. Gumla
S.S. Distribution Bowel
G.I. Bucket
Silpota
Wooden Belna Set
Plastic Dustbin
Plastic Dustbin
Water Filter Candle
Water Filter
Water Filter
Water Filter
Water Filter
S.S. Hata
Water Jug
Water Jug
Dao with Nail
Grass cutting Patti with nail
Sickle
Knife
Spade with Nail
Mixer Grinder
Specification
Tilak/Bagani/Vinoo
Tilok/Bagani/Vinoo
Tilok/Bagani/Vinoo
TATA/LAKHI, 60 Kg. Capacity
TATA/LAKHI, 50 Kg. Capacity
TATA/LAKHI, 40 Kg. Capacity
TATA/LAKHI, 30 Kg. Capacity
TATA/LAKHI, 20 Kg. Capacity
Bongaigaon made/J.K./Prakash)
Bongaigaon made/J.K./Prakash
Balaji/Kamal, 10 Liter capacity
Balaji/Kamal, 15 Liter capacity
Big size, Bongaigaon made
Iron, Big size, handmade
Big size, handmade
United/VIP/Roman
Big size, handmade
Big size, handmade
Bongaigaon made
Big size, Prakash/Amish/V. Kumar
3 in one, Amish/Prakash
No. 20, TATA
Big size, handmade, 18”
2’X2 ½ ‘, wooden, handmade
Big size, 60 liter capacity
Med. size, 32 liter capacity
Puro
Plastic, Puro,21 liter cap.
Plastic, Puro, 30 liter cap.
S.S., Milton ,21 liter cap.
S.S., Milton ,30 liter cap.
Big size, Prakash
Plastic, Sangam
S.S., United/VIP/Roman
Big size, handmade
Iron, handmade
Iron, handmade
Big size, handmade
TATA/AGRO
2/3 Bati,
Sd/(R.N.Goswami)
Dean
FVSc, AAU, Khanapara
Page 35 of 38
PACKAGE V
STATIONARY ITEMS FOR THE SESSION 2013-14
CVSc., AAU, KHANAPARA
Sl.No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
Name of items
Plastic water bucket(Make-Brite,
Ocean)
Duplicating paper
F.C. paper
Note sheet paper
Photocopy paper
Photocopy paper
Carbon paper
File Cover (Cloth binding )
File board
Plastic dustbin
Doormat
Calling bell (Electric)
Calling bell
Bound Register (neelgagan)
Bound Register
Dak Issue Register
Dak Receipt Register
Dak File
Eraser( Fluid white)
Alpin
Gems Clip
Gum paste
Stamp pad
Stamp pad ink
D.F.C. paper
Brown paper
Envelope(Clothes binding)
Envelope(Clothes binding)
Envelope(White)
Envelope(Lamination)
Staple machine
Staple machine
Staple pin
Staple pin
Tag
Twin thread ball
Colouring flag
Drinking glass
Cup plate
Quarter plate
Teaspoon
Tea tray
Tea flask
Specification
100 lit. (per bucket)
2.8 kg wt. (per ream)/Supreme
8 kg wt. HPC (per ream)
2.6 kg (per ream)/JK
A4 Size, JK (per ream)
A3 Size, JK (per ream)
503 Black (per pkt)/ Kores
Good quality Yellow/Blue/Pink/Green (per each)
Good quality
Good quality
Plastic/per sq. feet.
Bajaj/Philips
Manual
Ordinary (White) Running No.
Special (White) Neelgagan (per No)
(per No), Unique
(per No), Unique
Four folder/each
Camel/ Kores/Each
King (per pkt)
Office (per pkt)/ Bell
700 ml bottle (per botle)/ Camel
Kores/Camel (per No)
60 ml (per bottle)
6.1kg (per ream)/ HPC
(per No)
4”x10” (per 100)
10”x14” (per 100)
36 kg, 11”x5” (per 100)
12”x10” (per 100)
No.24x6/ kangro (per No)
No.10 (per piece)/ kangro
No.24x6 (per pkt)/ kangro
No.10 (per pkt)/ kangro
12” (per bud)
(per bud)
(per pkt)/Good quality
Yara (per each)/Good quality
Bone China Set of 6 nos (per set)
Bone China Set of 6 nos (per set)
(Stainless steel)/ Good quality
-DoCap.-1 ltr. Brand-Milton
Page 36 of 38
44.
45.
46.
47.
48.
Tea flask
Tea flask
Pin Cushion
Curtain Cloth
Classroom / office room curtain
clothes
49.
Tube Light set
50.
Microscope Cover
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
68.
69.
70.
71.
72.
73.
74.
75.
76.
77.
78.
79.
80.
81.
82.
83.
84.
85.
86.
87.
Jharan
Board duster
Chalk pencil
Chalk pencil
Paper wt.
Marker pen
Ball pen
Ball pen (both side)
Lock & Key
Plastic Scale
Plastic Scale
Towel
Towel
Chair Cushion
Punching machine
Punching machine
Water filter
Tap for filter
Plastic refill (pointed)
Plastic refill (pointed)
Plastic refill (pointed)
G.I. Bucket
Plastic Bucket
Phenyl
Lead pencil HB, 2HB,
Cello tap (Brown)
Cello tap (Transferant)
Sealing wax
Soap (Detol)
Soap
Toilet Paper
Vim Powder
Vim Bar
Dettol
Commercial sprit
Shaving blade
Harpic
Cap.-2 ltr. Brand-Milton
Cap.-½ ltr. Brand-Milton
Magnetic
Good quality, DCM / Meter
Cotton/ silk/synthetic, thick, minimum 1.2 meter
breath and weighing about 350 gm in dry
condition, either plain or printed with deep in
colour with standard stretchable quality
Complete set ; energy saving/Crompton
Greaves/Bajaj/Philips
Perspex cover for Binocular Microscope with base
27 x 23 x 42 cm and Trinocular Microscope with
base 30 x 25 x 45 cm
Per piece/Length & Breath=20”x20”
Camel/No.
White/ pkt.
Colouring/ pkt.
Special/ Pcs.
Camel/ piece
Cello/ piece
Renko/ piece
7 Liver/ pair/Godrej/Link
12”/ piece
18”/ piece
Big Size/ piece/Bombay Dying/DCM
Medium Size/ piece/ Bombay Dying/DCM
Kurlon 16 x 16 x 3/ piece
Medium 480 No Kongaro/ piece
Single/ piece/Kangaro
Porecelion, cap 14 ltr./piece
Porcelain filter
Small,Red/Blue (per 10 pieces pkt.)/Flair/Link
Medium, Red/Blue (per 10 pieces pkt.)/ Flair/Link
Long, Red/Blue (per 10 pieces pkt.)/ Flair/Link
14” /piece/TATA or equivalent
16 ltr/piece/ Cello or equivalent
450 ml/bottle/Bengal Chemical
Apsara/Pkt.
2” /piece
1”/piece
Gripex/piece
70gm/piece
(Life bouy), general size /piece
Good quality
1 kg/pkt
Medium size/Piece
250ml/bottle
Per ltr.
Lazer/Prince/pkt
500ml/ /bottle
Page 37 of 38
88.
89.
Bleaching Powder
Table Brush
90.
91.
92.
93.
Steel pati for grass Cutting
Telcom Powder
Tube light
CFL bulb
94.
95.
96.
97.
98.
99.
Electric bulb
Eraser (Rubber)
Phool Jharu
Bamboo Jharu
Coconut Jharu
Ceiling Jharu
100. Peon Book
101.
102.
103.
104.
105.
106.
107.
108.
109.
Log Book for vehicle
Door mat (Coir),
Door mat (Coir, Coloured),
Paper cutting knife
Nepthaline ball
Stock Register
Odonil
Toilet brush
Wash basin brush
110.
111.
112.
113.
114.
115.
116.
117.
Table glass
Cotton
Cotton
Cotton gauge
Cotton mop
Cotton mop
Roll duster
Glass & equipment cleaning
spray
Sterile pad
Roll bandage
Poplin cloths
Napkin paper
Calculator
White board writing pen
White board duster
Stainless steel tea flask
Stainless steel tea flask
Rope (Nylon)
Rope (Nylon)
Rope (Jute)
Rope (Jute)
Plastic mug
118.
119.
120.
121.
122.
123.
124.
125.
126.
127.
128.
129.
130.
131.
25 Kg Beg/Kg
Made of coir (wooden handle, Good Quality)
/piece
Good quality/piece
Medium size/Container
40w/Tube, Bajaj or Philips/piece
Various watts 8wt,14wt,18wt/30 w/Philips, Bajaj
/piece
60wt/100wt, Philips,Bajaj/piece
Non Dust, Nataraj/piece
Good quality/ piece
Good quality/ piece
Good quality/ piece
Made of Plastic fiber with Bamboo handle, Good
quality/ piece
Pacca binding/book/Unique, Neelgagan/each (rate
quoted as per No. of Book)
Pacca binding/book/Unique, Neelgagan /each
24’x14’ /each, Good quality
3′x1½′/each, Good quality
Big/ Piece , Steel with synthetic handle
100 gm/ packet
Per no./Unique
50gm/pkt
Made of Plastic (Good Quality)/Per piece
Made of Plastic teeth with plastic handle(Good
Quality)/Piece
8mm/Square feet
(Absorbent), Good quality/ medium size /roll
(Non absorbent), Good quality/ medium size/ roll
Than
With stand
Plain
With handle/each
Aqua based /Colin/each
3 inch x 3 inch/roll
2 inch/roll
Per meter
Per 100 pieces pkt.
12/Citizen-CT-912/ Big size/each
Per piece/Camlin/Kores
Per piece
50 Cup capacity/ Eagle/Balaji/Kamal /Piece
10 Cup capacity /Eagle/ Balaji/Kamal/Piece
Small/Kg
Big/Kg
Small/Kg
Big//Kg
1lit. cap./Piece
Page 38 of 38
132.
133.
134.
135.
136.
137.
138.
139.
140.
141.
142.
143.
144.
145.
146.
147.
148.
149.
150.
151.
152.
153.
154.
155.
156.
157.
158.
159.
160.
161.
162.
163.
164.
165.
166.
167.
168.
169.
Aluminum Jug
Spade
Spade
Belsa
Spade handle
Sickle
Floor brush
Aluminum milk cane
Aluminum milk cane
Kettle
Electric kettle
Carpet (Coir)
Rubber pipe
Plastic pipe
Binding Clip
Engagement pad
Slate
Clip board
Rexin cloth
Polythene bag (white)
Battery operated torch light
Torch light battery
Laboratory apron
Surgical apron(Finished)
Gum boot
Navy Blue Suiting/Teri cotton,
Bombay dying or DCM with
stitching charges
Navy Blue shirting/ Teri cotton,
Bombay dying or DCM
Scissor
Pin remover
Puncher
Screen cloth
Baygon
Baygon Spray Pump
Latrine Brush
Gestetner Copy Printer ink
Gestetner Copy Printer Master
Highlighter pen
Photocopy paper
1 lit. cap./piece
TATA, Big/each
TATA, Small/each
TATA/each
Per handle
Per piece
Iron teeth with plastic holder/Piece
20 lit. cap/Piece.
40 lit. cap./piece
2 lit. cap, aluminum/Piece
1 lit. cap./piece/Philips or equivalent
Per sq. mtr.
1”/meter
1”/meter
Per each
Per each
Per each
Per each
Per meter, Good quality
20 micron Small & big size/Kg
3 battery /each/Eveready
1.5v /each
Terry cot /each
Cotton /each
Quote different sizes/Pair
Per meter with tailoring charge.
Per meter with tailoring charge.
Numix gold streak 8.5 mm
Best quality/ each
With plastic handle
1 Liter
Plastic made
CPI 2
Legal size (JK)
Sd/(R.N.Goswami)
Dean
Faculty Of Vety. Science
Assam Agril. University
Khanapara, Guwahati-781 022
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising