GoMax Electronics CV-509 User Manual
GoMax Electronics CV-509 is a versatile converter that enables effortless connection between HDMI/DVI sources and VGA/component displays, along with audio output options. With this device, you can seamlessly integrate non-HDMI/DVI displays into your modern entertainment setup, enjoying high-definition digital video and audio. It supports resolutions up to 1080p and offers both analog and digital audio outputs for a comprehensive audio experience.
Advertisement
Advertisement
CV-509
HDMI/DVI to VGA/Component & Audio
Converter
User
Manual
Made in Taiwan
Safety
and
Notice
The CV-509 HDMI/DVI to VGA/Component & Audio Converter has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments,
CV-509 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. z Follow all instructions and warnings marked on this unit. z Do not attempt to service this unit yourself, except where explained in this manual. z Provide proper ventilation and air circulation and do not use near water. z Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. z Use only the power adapter, power cords and connection cables designed for this unit. z Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Warning!
This
device
is
served
purely
for
conversion
between
video
formats.
This
device
CANNOT
convert
the
input/output
video
resolutions.
~ 1 ~
Introduction
This CV-509 HDMI/DVI to VGA/Component & Audio Converter offers an easy and instant approach for converting digital HDMI to analog PC video (VGA) and component video (YPbPr) with digital audio (S/PDIF) and analog stereo audio. With this module, YPbPr/VGA based receivers such as LCD monitors or plasma TV can be readily connected to HDMI sources such as DVD players or PS3. In addition, the embedded HDMI / DVI selector facilitates the switch between the HDMI and DVI input sources. This cost effective solution let you keep using your non-HDMI/DVI display to access HDMI or DVI source, and enjoy high definition digital video and audio.
Features
z HDMI & DVI 1.0 compliant z HDMI video supports up to 1080p z Supports HD (1080i / 720p) component video output z Supports up to UXGA (1600x1200@60) & WUXGA (1920x1200@60) PC graphics output z RCA S/PDIF audio output z Stereo analog audio output z Front panel LED indicators and push button z EDID learning ability
HDMI source
VGA monitor
VGA cable
HDMI cable
CV-509
VGA-to-YPbPr breakout cable
HDTV
DVI source
DVI cable
YPbPr cable
Earphone audio cable
RCA audio cable
YPbPr or VGA display/projector
Analog PC Speaker
S/PDIF AV Amplifier
~ 2 ~
Specifications
&
Package
Contents
Model Name
Technical
Role of usage
HDMI compliance
DVI compliance
Video bandwidth
Video support
Audio support
Input TMDS signal
Input DDC signal
ESD protection
CV-509
Digital-to-analog format converter
HDMI
DVI 1.0
Single-link 165MHz [4.95Gbps]
Up to 1080p60, WUXGA [1920x1200@60] & UXGA [1600x1200@60]
Stereo audio
1.2 Volts [peak-to-peak]
5 Volts [peak-to-peak, TTL]
[1] Human body model — ± 19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ± 2kV
PCB stack-up 4-layer board [impedance control — differential 100 Ω ; single 50 Ω ]
Input
Output
HDMI connector
DVI connector
VGA connector
RCA connector
3.5mm connector
Push-in button
DIP switch
1x HDMI
1x DVI
1x VGA/Component (via VGA-component breakout cable)
1x RCA digital audio
1x 3.5mm analog audio
Type A [19-pin female]
DVI-I [29-pin female digital only]
HD-15 [15-pin D-sub female]
Coaxial socket for S/PDIF digital stereo audio [PCM 48kHz]
Earphone socket for analog stereo audio
[1] HDMI/DVI input switch / [2] VGA/component output switch
2-pin for EDID learning
Mechanical CV-509
Housing Metal enclosure
Model 123 x 92 x 25mm [4.8" x 3.6" x 1.0"]
Dimensions
[L x W x H]
Package 270 x 175 x 80mm [10.6" x 6.9" x 3.1"]
Weight
Carton
Model
Package
450 x 370 x 300mm [1'6" x 1'3" x 11.8"]
376g [13.2 oz]
790g [1.7 lbs]
Fixedness Wall-mounting
Power supply
Power consumption
5V 2A DC
2 Watts [max]
Operation temperature
Storage temperature
Relative humidity
0~40 °
-20~60
C [32~104
° C [-4~140
°
°
F]
F]
20~90% RH [no condensation]
Package Contents
1x CV-509
1x VGA-component breakout cable
1x 5V power adapter
1x User Manual
~ 3 ~
Supported
Resolutions
PC Graphics [DVI or VGA]
VESA 640x400 @85Hz VESA 1024x768 @60Hz VESA 1280x960 @85Hz 1152x864@60Hz
VESA 720x400 @85Hz VESA 1024x768 @75Hz VESA 1280x1024 @60Hz Mac 480-66A
VESA 640x480 @72Hz VESA 1024x768 @85Hz VESA 1280x1024 @85Hz Mac 480-66B
VESA 640x480 @75Hz VESA 1152x864 @60Hz VESA 1360x768 @60Hz Mac 600-66
VESA 640x480 @85Hz VESA 1152x864 @75Hz VESA 1440x900 @60Hz Mac 768-60
VESA 800x600 @60Hz VESA 1280x768 @60Hz VESA 1400x1050 @60Hz Mac 870-75
VESA 800x600 @72Hz VESA 1280x768 @75Hz VESA 1400x1050 @75Hz IBM 6000
VESA 800x600 @75Hz VESA 1280x768 @85Hz VESA 1920x1200 @60Hz NEC 1024-70
VESA 800x600 @85Hz VESA 1280x960 @60Hz VESA 1600x1200 @60Hz SUN 1024-76
Video [HDMI or component (YPbPr)]
EIA 720x480p @59.94(60)Hz
EIA 720x576p @50Hz
EIA 1280x720p @59.94(60)Hz
EIA 1920x1080i @59.94(60)Hz
EIA 1920x1080p @59.94(60)Hz
712x484 (NTSC)
702x574 (PAL)
Panel Descriptions
Front
Panel
1 2 3 4 5 6
1. DIP Switch for EDID 3. HDMI input 5. Power on/off indicator
2. HDMI or DVI source switch button 4. DVI input 6. +5V DC interlocked power jack
~ 4 ~
EDID
DIP
Switch
1 Mode
On ª Learn EDID from VGA socket and save EDID to HDMI socket
Off © Write back the default EDID to HDMI socket
2
On ª Learn EDID from VGA socket and save EDID to DVI socket
Off © Write back the default EDID to DVI socket
Rear
Panel
7 8 9 10
7. S/PDIF audio output 9. VGA output or component output via connecting a breakout cable
8. Stereo audio output 10. VGA or component output switch button
1.
Connect HDMI or DVI source to the video input.
Hardware Installation
2.
Connect S/PDIF or stereo audio source to RCA jack or 3.5mm jack.
3.
For connecting to VGA display/projector, link VGA cable to the VGA output connector. For connecting to component (YPbPr) video display/projector, link VGA-component breakout cable first to the VGA output connector then link a component cable to the component (YPbPr) display/projector.
4.
Power up the CV-509.
~ 5 ~
1.
Power up the CV-509. Connect display to VGA/YPbPr Output.
EDID Learning
2.
To learn EDID for HDMI source, please power up CV-509 first. Secondly pull down the DIP switch 1 to ON, and the red light will be dark and bright to indicate the EDID learning process is complete. Finally, please remember to reboot CV-509 for updating. You DON’T NEED to pull up the DIP switch again unless you want to learn another EDID by pulling DIP switch 1 up and down.
3.
To learn EDID for DVI source, please power up CV-509 first. Secondly pull down the DIP switch 2 to ON, and the red light will be dark and bright to indicate the EDID learning process is complete. Finally, please remember to reboot CV-509 for updating. You DON’T NEED to pull up the DIP switch again unless you want to learn another EDID by pulling DIP switch 2 up and down.
Notice
1.
Only HDMI enabled TV sets with underscan/overscan
*
support, the full active video can be accurately displayed. Some HDMI equipped TV sets may not support this feature. If underscan/overscan* is NOT supported, the top, bottom, left and right border of the active video may be screened, and the S/PDIF audio may not sound right.
2.
Analog stereo audio can merely support 2-channel audio. This version does NOT support 8-channel analog audio applications.
3.
S/PDIF audio input supports 2-channel stereo audio input only.
4.
S/PDIF supports only 48KHz audio sample rate. Other than this rate, the input digital audio should be adjusted to 48KHz in order to get audio signal correctly sent.
* The underscan mode displays the full video frame, which reveals content on the edge that is recorded.
In overscan, the field monitor zooms in to the area that would be visible on most televisions.
Set the field monitor to underscan if your video will be viewed on a computer monitor or shown with a projector and also to look for light stands, microphones, and other unwanted objects on the edges of your shot.
Set it to overscan to see how the video will look on a television.
~ 6 ~
Limited Warranty
The SELLER warrants the CV-509 HDMI/DVI to VGA/Component & Audio Converter to be free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer.
Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surge. This warranty is offered by the SELLER for its BUYER with direct transaction only. This warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the
BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for shipping charges to and from the SELLER. Cables and power adapters are limited to a 30 day warranty and must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However, The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the CV-509 features and specifications is subject to change without further notice.
~ 7 ~

Public link updated
The public link to your chat has been updated.
Advertisement