DYNAMITE

ULTRA-POWERFUL COMPACT VACUUM

USER GUIDE

EXTENDED WARRANTY

IF YOU REGISTER YOUR WARRANTY ONLINE WITHIN 14 DAYS OF PURCHASE, WE WILL EXTEND THE

1 YEAR WARRANTY TO A 2 YEAR WARRANTY.

To activate your extended warranty visit www.tevo.co.za

, click the “Register warranty” tab at the top of the page, then complete the form provided.

Thank you for purchasing a BENNETT READ

DYNAMITE vacuum.

Your DYNAMITE vacuum incorporates the latest technological advances in home cleaning systems. It imitates the most powerful forces of nature in a sleek, elegant cleaning system to ensure that your home is easily and properly cleaned.

Your new vacuum is manufactured to a high standard of quality and is backed by a one year warranty by Tevo. If you register your warranty online within 14 days of purchase, we will extend the warranty to 2 years. To activate your extended warranty visit www.tevo.co.za, click the “Register warranty” tab at the top of the page, then complete the form provided.

We also stand behind it with a knowledgeable, dedicated Customer

Care department, so should you ever have a problem, you'll receive fast, considerate assistance.

Should you need any support from us, please visit www.tevo.co.za or call 0861 77 88 88.

PLEASE KEEP THIS USER GUIDE IN A SAFE PLACE AND

READ IT CAREFULLY BEFORE USING YOUR BENNETT READ

DYNAMITE VACUUM FOR THE FIRST TIME.

1

IMPORTANT SAFETY INSTRUCTIONS

!

WARNING

TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK, OR INJURY:

BASIC SAFETY PRECAUTIONS

SHOULD BE OBSERVED WHEN

USING YOUR DYNAMITE,

INCLUDING THE FOLLOWING:

• This vacuum is for household use only

• Use only indoors on dry surfaces

• Do not immerse any part of the system in

water or any other liquids

• Do not operate the system if the appliance

or any other part of the system has been

dropped or damaged

• Do not disassemble or attempt to repair

your vacuum. Return the unit for examination and repair

• Do not use the vacuum to pick up

flammable or combustible liquids such as

gasoline and do not use it in areas where

they may be present

• Do not use the vacuum to pick up anything

that is burning or smoking such as

cigarettes, matches or hot ashes

• Use extra care when cleaning on stairs

• Do not use your vacuum without the

filters in place

• Do not leave your vacuum plugged in when unattended

• Unplug the electrical cord when not in

use and before cleaning or servicing

• Keep loose clothing, hair and all parts of

body away from openings and moving

parts

• Not intended for use by persons (including

children) with reduced physical, sensory

or mental capabilities, or lack of

experience and knowledge

• Keep out of reach of children

• Do not allow your vacuum to be used as a toy

• Extra care is necessary when using your

vacuum near children, animals or plants

• Do not pull the electrical cord or use the

cord as a handle

• Take care to not close doors on the

electrical cord and do not pull the cord

around sharp edges or corners

• Do not run the vacuum over it’s own

electrical cord

• Do not allow the cord to touch hot surfaces

• Turn off all controls as applicable before

unplugging from the electrical outlet

• To unplug your vacuum, grasp the plug, do not unplug by pulling on the

electrical cord

• Do not handle the plug or vacuum with

wet hands

• Do not operate your vacuum while barefoot

• Do not put any objects into the vacuum

openings

• Do not use your vacuum while any opening is blocked

• Keep your vacuum free of dust, lint, hair

or anything else which may reduce airflow

• Keep your work area well lit

• Using improper voltage may result in

damage to the motor and possible injury

to the user. The correct voltage is listed

on the rating label. For operation on

220-240V, 50/60Hz power supply only

• Only use the accessories supplied with

your vacuum

• Only use spare parts recommended by

Bennett Read and Tevo

• Store your vacuum indoors in a cool, dry area

SAVE THESE INSTRUCTIONS

FOR FUTURE USE

FOR HOUSEHOLD USE ONLY

2

PRODUCT VIEW

12

11 13

18

4

14

19

16

5

8

7

6

17

1

3

9

10

15

2

1. Multi-surface floor nozzle

2. Brush switch

3. Extension wands (x2)

4. Dusting brush/Crevice tool

5. Air flow regulator

6. Hose

7. Carry handle

8. Dirt container release handle

9. Hose connector

10. Suction inlet

11. Power button

12. Electronic variable suction control dial

13. Auto-cord rewind button

14. Dirt container microparticle filter

15. Dirt container

16. Post-motor filter door

17. Post-motor filter

18. Floor nozzle storage slot

19. Power cord and plug

!

CAUTION:

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

3

ASSEMBLY

A.

Connect the hose (6) to the vacuum by inserting the hose connector (9) into the suction inlet (10). You will hear a ‘click’ when it is securely in place

B.

Attach the extension wands (3) together by inserting one into the other. Twist slightly to tighten the connection

C.

Connect the hose handle to the end of the extension wand and twist

slightly to tighten

D. Connect the floor nozzle (1) to the

other end of the extension wand and

twist slightly to tighten

E. Once assembled, you can store your vacuum by inserting the storage clip

(located on the back of the floor nozzle) into the storage slot (18) on the rear of the vacuum

OPERATIONS

POWER CORD

The power cord (19) is located at the rear of the vacuum. Gently pull out the power cord.

Stop pulling the cord when the yellow line is visible. There is also a red line which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.

AUTO-CORD REWIND

Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button (11) OFF and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the auto-cord rewind button (13) to rewind the cord automatically.

POWER BUTTON

Turn the power ON or OFF by pressing lightly downward on the power button (11).

B.

C.

D.

A.

!

CAUTION:

The power cord retracts very quickly.

Take care to avoid injury.

Auto cord rewind

Power

Button

4

OPERATIONS

SPECIAL TOOLS

Your BENNETT READ DYNAMITE vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile bare floor and above floor vacuum cleaner when you select one of the special tools.

TIP:

Before cleaning under low furniture, check area first for objects that might harm the unit or block the hose.

FLOOR NOZZLE

Use to vacuum carpets, rugs and bare floors.

The swivel head turns to get into tight spaces and fits under cabinets

1 . To vacuum carpets and rugs, push the

brush switch to the carpet position

1.

[ ]. This will pull the brushes up

into the floor nozzle.

2 . To vacuum bare floors, push the brush

Brush up

switch to the bare floor position [ ].

This will extend the brushes

down from the floor nozzle.

CREVICE TOOL/DUSTING BRUSH

To vacuum in narrow spaces, use the Crevice

Tool. To convert to the Dusting Brush, flip the brush over for cleaning curtains, draperies, cushions and fabrics.

Crevice tool

Dusting brush

2.

Brush down

ELECTRONIC VARIABLE

SUCTION CONTROL DIAL

To reduce the suction power for vacuuming delicate fabrics, turn the Electronic Variable

Suction Control Dial (12) anticlockwise. To increase the suction power, turn the Electronic

Variable Suction Control Dial clockwise.

AIR FLOW REGULATOR

Open the air flow regulator (5) by sliding the regulator down towards the extension wand to an open position. This will reduce the suction power for vacuuming delicate fabrics.

For full suction power, close the air flow regulator by sliding the regulator up to the closed position.

TIP:

Hair, string and small objects can block the hose and tools. Check them occasionally for obstructions.

5

Air flow regulator

!

WARNING:

To avoid injury, turn cleaner OFF and unplug cord from wall when not in use.

MAINTENANCE AND CARE

To maintain maximum performance from your vacuum, perform these maintenance checks:

EMPTYING THE DIRT CONTAINER

Empty the dirt container as soon as the dirt reaches the “max” line on the sides of the dirt container (15).

STEP 2

STEP 3

STEP 1:

Unplug the vacuum from the electrical outlet

STEP 2:

Remove the hose by pressing the securing clips inward and pulling the hose connector out from the suction inlet. Set the hose aside

STEP 3:

Lift the dirt container release handle in front of the carry handle to remove the dirt container

STEP 4:

Open the dirt container lid by pressing the button below the release handle and lifting the lid upwards

STEP 5:

Remove the dirt container lid

STEP 6:

Shake out the dirt container over a rubbish bin

STEP 7:

Replace the lid on the dirt container

STEP 8:

Replace the dirt container by placing it back into the vacuum and pushing down on the dirt container until it clicks back into place

!

WARNING:

To reduce the risk of injury from moving parts and/or electrical shock, turn Power Switch

OFF and disconnect plug from electrical outlet before performing maintenance checks.

6

STEP 4

STEP 5

STEP 6

MAINTENANCE AND CARE

CLEANING THE DIRT

CONTAINER FILTER

(MICROPARTICLE FILTER)

The key to maximum performance is a clean filter. Cleaning the filters after each use will help your

DYNAMITE vacuum operate at peak efficiency.

STEP 2

STEP 1:

Remove and open the dirt container (follow steps 1 to 3 on page 6)

STEP 2:

Remove the Microparticle Filter (14) from the back of the Dirt Container by gently pulling the tab

STEP 3:

The Microparticle Filter can be hand washed in cold water with a mild detergent.

Rinse the filter well and air dry

COMPLETELY before placing back into the Dirt Container.

STEP 4:

Insert the Microparticle Filter back into the

Dirt Container by lining up the bottom tab first, then gently pushing the filter securely into place from the top

STEP 4

!

WARNING:

Never operate your DYNAMITE vacuum with damp or wet filters.

!

CAUTION:

Never operate your DYNAMITE vacuum without all the filters in place. Doing so may damage the motor and void the guarantee.

7

MAINTENANCE AND CARE

CLEANING THE

POST-MOTOR FILTER

The post-motor filter (17) assists in the filtration process to return cleaner air into the room

STEP 1:

Unplug the vacuum from the electrical outlet

STEP 2:

Remove the filter door (16) by pulling up on the tab, then pulling out and away from the vacuum

STEP 3:

Remove the post-motor filter from the vacuum

STEP 4:

The post-motor filter can be hand washed in cold water with a mild detergent.

Rinse well and air dry completely before placing back into the vacuum

STEP 5:

When dry, replace the post-motor filter into the filter cavity

STEP 6:

Replace the filter door by placing the two tabs on the top of the filter door into the notches on the top of the post-motor filter compartment and pushing the tab forward into the vacuum to lock into place.

TIP:

For maximum cleaning performance check the filters often and clean or replace them regularly.

STEP 2

STEP 3

STEP 5

STEP 6

NOTICE:

This product is intended for household use only and not for commercial or industrial use.

Vacuuming of dust from products like plaster, concrete or ashes will damage the motor and void the guarantee.

STEP 7

!

WARNING:

Never operate your DYNAMITE vacuum with damp or wet filters, or without all filters in place.

8

MAINTENANCE AND CARE

CLEARING BLOCKAGES

FROM THE DIRT CONTAINER

1.

Unplug the vacuum from the electrical outlet

2. Follow steps 1 to 4 on page 6 to remove and open the dirt container

3. Follow step 2 on page 7 to remove the

Microparticle Filter

4. Tap the dirt container over a garbage bin

5. Clear the dirt container of any dirt or debris

6.

Check if there are any blockages in

the suction inlet

7.

After clearing any dirt or debris

from the dirt container, replace the

dirt container assembly into the dirt

container

!

WARNING:

To reduce the risk of electric shock, turn Power

Switch OFF and disconnect plug from electrical outlet before performing troubleshooting checks.

TROUBLESHOOTING

Problem

Vacuum cleaner won't run

Possible causes

1. Power cord not firmly plugged in

2. Power button not pressed down

Solution

1. Check electrical plug

2. Press power button

Vacuum cleaner doesn't vacuum effectively

1. Tools, hose or extension wands

are blocked

2. Filters are dirty

3. Dirt container is full

4. Hose connector not securely

attached to suction inlet

5. Crack or hole in hose

6. Air flow regulator is set to open

or minimum setting

7. Blocked dirt container

1. Remove each part

and check for

blockages

2. Follow instructions

for cleaning filters

on pages 7 - 8

3. Follow instructions

for emptying the dirt

container on page 6

4. Check that hose

connector is locked

into suction inlet

5. Check hose and

replace if necessary

6. Change to closed or

maximum setting

7. Clear blockage from

the dirt container

following steps 1 to

7 at the top of this

page.

9

1.

TROUBLESHOOTING CONTINUED

Problem Possible causes Solution

Dust blows out of the air vents

1. Dirt container is full

2. Filters missing or installed

incorrectly

3. Filters are dirty

1. Empty the dirt

container

2. Check all filters for

correct installation

3. Check and clean or

replace all filters

4. Hose connector is blocked 4. Remove hose and

check for blockages

5. Hose connector is not securely

attached to the suction inlet

5. Make sure the hose

connector is locked

into the suction inlet

6. Crack or hole in hose 6. Check hose and

replace if necessary

Other maintenance or service not included in the manual must be performed by an authorized Tevo service representative. For any questions or concerns, contact customer care on 0861 77 88 88.

REPLACEMENT PARTS

The items below are available for purchase as accessories for your BENNETT READ DYNAMITE vacuum. To purchase contact Tevo customer care in your area. Contact details on back cover.

Item

1.

2.

3.

4.

5.

6.

Part #

HVC29C01

ZHVC12902

ZHVC12903

ZHVC12904

ZHVC12905

ZHVC12906

Part name

Dirt container Microparticle filter

Post-motor filter

Floor nozzle

Hose with handle

Extension wands (2)

Crevice tool/Dusting brush Combo Tool

2.

3.

4.

5.

6.

10

CONSUMER WARRANTY

Your BENNETT READ DYNAMITE vacuum is warranted against manufacture faults for a period of 1 year. If you register your warranty online at www.tevo.co.za within 14 days of purchase, then your warranty will be extended to 2 years.

Tevo undertakes to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period. This warranty excludes damage caused by misuse, neglect, shipping accident, commercial use, incorrect installation, or unauthorized repair. This guarantee does not apply to routine maintenance components such as, but not limited to, filters and brushes. Tevo is not liable for incidental or consequential damages of any nature associated with the use of this product. Tevo’s liability will not exceed the purchase price of this product.

PLEASE KEEP YOUR RECEIPT TO VERIFY YOUR WARRANTY.

Warranty and service enquiries can be made by contacting:

Tevo (Pty) Ltd

Gauteng 086 111 8386 or 012 740 5000

Durban (031) 570 5900

Cape Town (021) 380 0038/9

Customer Service Help Line 0861 77 88 88 www.tevo.co.za

TECHNICAL SPECIFICATIONS:

Nominal voltage: 220-240 V AC

Nominal frequency: 50/60 Hz

Rated Power Output : 1400 W

Model: V8251-8

ENVIRONMENTALLY FRIENDLY DISPOSAL

Do not dispose of electrical appliances with general municipal waste. Hazardous substances can leak and contaminate the groundwater, affecting the food chain and ultimately damaging the environment and your health. Contact your local municipality for information on safe disposal in your area.

Please think of the environment and recycle all plastic and paper in accordance with your local recycling program.

PLEASE RECYCLE