Advertisement
Advertisement
Contents 2. Safety/Precautions ............................................................................................... 4 2.1 Safety 2.2 Precautions 3. Points to Check before Use ................................................................................. 6 3.1 Accessories 4. Controls/Functions .............................................................................................. 7 4.1 Front Panel 4.2 Rear Panel 4.3 Remote controller 4.4 Front Display 5. How to Connect .................................................................................................. 12 6. Operation ............................................................................................................. 14 6.1 Getting Started 6.2 System Setting 6.3 Channels 6.4 Electronic Program Guide 6.5 Games 6.6 Storage 6.7 System Information 6.8 Common Interface 6.9 Conditional Access System 6.10 PVR 7. Troubleshooting ................................................................................................. 55 8. Specifications ..................................................................................................... 56 1 English 1. Introduction ........................................................................................................... 2 1.1 Overview 1.2 Main Features 1.2 Main Features Introduction This satellite receiver is designed for the reception of free-to-air and encrypted channels. Depending on your location, enjoy the rich choice of up to 10,000 different channels broadcasting a large range of programs: culture, sports, cinema, news, events, etc. This receiver is assembled with highly qualified electronic parts. 1.2 Main Features ᶀ High-Definition Personal Video Recorder (HD PVR) ᶀ Compliant MPEG-II/ MPEG-IV/ H.264. ᶀ Output resolution 576p & 576i, 720p, 1080i & 1080p ᶀ HDMI & Component Output (YPbPr) with Upscaler to Improve Picture Quality ᶀ 1 Smart Card Reader & 2 Common Interface(2CI) ᶀ MP3 player and JPEG viewer via USB flash Drive (memory stick) ᶀ Multisatellite search. ᶀ On-screen display with true color full resolution. ᶀ DiSEqC control version 1.0, 1.1, 1.2 and USALS compatible. ᶀ Enhanced 16 favorite channel groups. ᶀ Powerful channel control by favorites, lock, skip, move and delete function. ᶀ Channel sort by alphabet, transponder and CAS. ᶀ Multilingual OSD Menu : English, Spanish, Portuguese, French, German, Italian, Turkish, Arabic, Persian, Russian, Greek, Czech, Romanian, Polish. ᶀ Extended EPG and program reservation on EPG. ᶀ Teletext & Subtitle by OSD and VBI ᶀ Last channel memory function. ᶀ Total 10,000 channels programmable. ᶀ Factory default channel list ᶀ Sensitive Tuner ᶀ Support 4:2:0 ᶀ Less than 1 second channel change ᶀ Dolby Digital Optical S/PDIF 2 DiSEqC is a trademark of EUTELSAT The digital receiver can supply a current 400 milliampere at maximum for antenna devices including LNB, DiSEqc switch and antenna rotor through each antenna input connection separately but not simultaneously.If there are too many antenna devices to be supplied with power through antenna input connections simultaneously for a long time, your LNBs may lack power to operate. So it is recommended to link the LOOP OUT 1 connector to the LNB INPUT 2 connector with a loop cable even though the digital receiver is designed to operate over two antennas alternatively. 3 English 1.1 Overview ᶀ 2 Scarts, (CVBS, RGB / Loop-through RGB) ᶀ Various games ᶀ Parental lock / Installation lock / receiver lock. ᶀ Zoom function on pause/live channel ᶀ Multipicture display. ᶀ Support for multiple language broadcasts ᶀ SCPC & MCPC receivable from C/Ku band satellites LNBs supported : Universal, Single, Single S & C band wideband LNBs ᶀ AC 100~250V, 50/60Hz ᶀ LNB Short Circuit protection onboard ᶀ Software & Channel List download via USB 2.0 ᶀ USB 2.0 Ports: PVR function using external HDD, playback MP3, JPEG Photos & Software transfer ᶀ Blind Search ᶀ Lan 10/100Mbps Ethernet ᶀ Manufactured under license from Dolby Laboratories. “Dolby” and the double-D Symbol are trademarks of Dolby Laboratories. 2.2 Precautions Safety/Precautions 2.1 Safety Be sure to read this user's manual before starting the operation of the unit. Do not touch the power cord with wet hands as it may cause electric shock. Never open the cover. It is very dangerous to touch the inside of the unit due to possible electric shock. Place the unit in a well ventilated and no-heat environment. When you do not use this unit for a long time, make sure that power cord is pulled out from the outlet. Also do not use a damaged power cord as it may cause fire or electric shock. A professional installation is required. If reception is interrupted, contact your local service centre. Install the unit horizontally. An uneven installation may cause the unit to be damaged. Do not put heavy items such as a TV set on the unit. That may damage the unit. Do not leave the unit where the water drops or splashes. Do not put water holding items such as vases on the unit. Do not install the unit: Moving the unit to a hot area from a cold one will cause condensation. Do not operate the unit for one or two hours or until it has dried completely. ⍥Where it is subject to vibrations ⍥Where it is exposed to direct sunlight ⍥Where there is humidity ⍥Where the temperature is too high or too low. ⍥Where there is no ventilation ᶀ The mains plug is used as the disconnect device. The disconnect device shall remain readily operable. 4 5 English When installing the unit Controls/Functions 3.1 Accessories 4.1 Front Panel English Points to Check before Use The accessories below are included with this receiver: 1 Remote control : 1 User's manual : 1 er's Us 5 al nu ma 2 Batteries (AAA type) : 2 3 4 6 7 HDMI cable : 1 1 Standby/Power on Indications Lamp : Flashes red light in “Standby” mode and shows no light in “Power ON” mode. 2 Power : Switches the receiver between “Standby” and “Power ON” modes. ᶀ If any of the above-listed accessories is missing, contact your sales representative. 3 - 4 CH ƌƊ : To switch channels or change the cursor position on the application screen. 5 Smart Card Reader(Option) : Insert smart card for encrypted channel access. 6 - 7 Common Interface Slot : For CI module(PCMCIA module) with smart card to watch pay TV channels. 3.2 The Satellite dish Your dish should be properly installed and azimuth and elevation must be precisely set up. ᶀ This unit supports DiSEqC 1.2 and can work with a compatible antenna positioner. Ask your dealer for information. 6 7 4.2 Rear Panel 4.3 Remote controller 5 7 11 10 13 14 1 POWER : To turn the receiver On/Off. 2 STAND BY : Just turn the receiver off. 3 TEXT : To show the teletext contents if 1 3 4 2 3 4 6 8 9 12 15 Connector Function 1 LNB INPUT IEC 169-24 FEMALE IF input from LNB to digital tuner 2 LNB OUTPUT IEC 169-24 FEMALE IF loop-through output from digital tuner 3 S/PDIF Fiber Optic Digital audio output (Optical) 4 USB USB A-type USB 2.0 5 VCR/AUX SCART SCART CVBS Video Output 4 SUBTITLE : To turn closed captions on or off. 5 AUDIO : To show the Multi-language 7 8 No. Name teletext is transmitted. 2 6 5 10 11 14 16 18 audio track, the stereo-mono mode and subtitle information. 6 MUTE : To turn the sound On/Off. 9 13 12 7 Numeric Keys (0-9) : To enter numerical settings (such as channel numbers) directly. 15 8 TV/RADIO : To switch between TV and Radio. 19 9 SLEEP : To set the STB off after minutes. 17 10 GUIDE : To show the TV/Radio program guide. CVBS, RGB Video Input 11 INFO : To show information about the current program. Press twice to show detail. Audio Output 6 TV SCART SCART CVBS Video Output, Audio Output 7 RS-232C DB-9 Low speed serial port 8 LAN USB A-type USB 2.0 9 HDMI HDMI Digital Video/Audio Output 10 VIDEO RCA cinch Composite video output 11 AUDIO L RCA cinch Left audio output 14 MENU : To enter or exit the main menu. 12 AUDIO R RCA cinch Right audio output 15 EXIT : To exit from the present menu and 13 Y RCA cinch Component video output(Y) 14 Pb RCA cinch Component video output(Pb) 15 Pr RCA cinch Component video output(Pr) 8 12 RECALL : To move to the previous channel. Used for special functions in menu mode. 13 ASPECT : To select a TV aspect ratio with Pan Scan or Letter-Box(4:3) (Full screen or pillar box(16:9). move to the previous menu. 16 - 17 Up & Down : To switch channels in non-menu mode and move the cursor up/down in menu mode. 9 English 1 4.3 Remote controller How to Connect volume level in non-menu mode. When Connecting the Receiver to a TV with RF connectors 20 OK : To show the Channel List in non- menu mode and select an item or confirm in menu mode. 21 - 22 Vol Up & Down : To change the volume level in non-menu mode. 23 - 24 Double arrow Up/Down : To move to 1 Connect the TV antenna to TV ANT IN 2 Connect the Video and Audio of the TV to Video and Audio: connect the red and white connectors to Audio R and Audio L, and the yellow connector to Video 3 Connect your satellite dish the next or previous page when many pages are available. 25 FILELIST : To display the filelist. 26 GROUP : To change the channel groups(Satellites or favorite groups). 27 - 30 Color Key : Select the option such 20 18 19 21 23 as View List, Select Disk, Rename. 31 REW : Playback in rewind mode. 32 Time Shift : Play Content. PAUSE 22 25 27 28 31 32 35 36 39 40 43 44 33 PLAY : Play Content. 24 34 FWD : Playback in forward mode. 26 35 REC : Start recording. 30 29 34 33 38 37 42 41 46 45 36 STOP : Stop Playback. 37 SLOW : Playback in slow mode. 38 ADVANCE : Go to live channel. 39 MOSAIC : To display multiple pictures. 40 FREEZE : Freeze Live picture 41 ZOOM : To zoom In/Out. 42 V.FORMAT : To switch the resolution of video output. 43 F1 : Media File Playback 44 - 46 F2 ~ F4 : Reserved button for new function. 10 11 English 18 - 19 Vol Up & Down : To change the 6.1 Getting Started Operation 3) Antenna Setup ⊺ Use 6.1 Getting Started / and / to move in the menu. ⊻ Press on ‘Dish Setting’. The following window will appear. <Figure 6.1.3> If you have a motorized dish, press on ‘Motorized Setting’. <Figure 6.1.4> After your receiver is powered on, proceed with installation as follows : ҫ Note : Enter a 4-Digit password if need arise. The default password is ‘0000’. 1) Menu Language Setting ⊹ Turn on your TV and receiver. ⊺ The menu for language selection will appear.<Figure 6.1.1> Select one language and press to proceed. <Figure 6.1.3> <Figure 6.1.4> ⊼ Select the item that you want to edit, and set its parameters as desired. <Dish Setting> / - Satellite : Select any satellite by pressing buttons on the remote. <Figure 6.1.1> 2) Country Setting ⊹ Select a country and press the button on. - Frequency : Select the Frequency - LNB Power : Select among ON/OFF/13V/18V. - LNB Type : Select among Single/Universal/OCS. - LNB Freq : Set the frequency of the LNB oscillator. - 22KHz : When not AUTO, set the signal path from LNB or switch by selecting a control signal among 0/22KHz. - DiSEqC 1.0 : Select DiSEqC 1.0 Port. - DiSEqC 1.1 : Select DiSEqC 1.1 Port. ⊽ Select the item that you want to edit and set its parameters as desired. <Motorized Setting> / - Satellite : Select any satellite by pressing buttons on the remote. - Frequency : If the default TP frequency is not appropriate, you can select another TP frequency at which to check for signal. - DiSEqC Motor : Select DiSEqC protocol among OFF/1.2/USALS as appropriate for your Motor. <Figure 6.1.2> 12 13 English ⊹ Press the MENU button to display the main menu. 6.1 Getting Started 6.1 Getting Started (When the DiSEqC Motor parameter is set as 1.2) 4) Satellite Scan - Move Fine : Move the dish position 1 step at a time to west/east by pressing buttons. - Motor Control : Control motor by / press button on the remote. ҮRecalcuate : Recalculate the position of all other saved satellites relative to the known position. ҮReset System : Reset the position of all saved satellites. ҮDisable Limit : Disable east and west limit. ҮEnable Limit : Enable the saved east and west limit. / / ҮSet West Limit : Edit & Save limit by pressing ᶀ Auto Scan <Figure 6.1.5> ⊹ Select the satellites you want to search by pressing the You can select more satellites by pressing the remote. / button on the remote. buttons and or or buttons. buttons. - Go To : Go to the position of the saved satellite. - Network Search : Set ON to find more transponders (frequencies) through a Network Information Table (NIT) scan. That is, when the broadcaster is sending a NIT through a given transponder, the receiver will also scan for transponders listed in the NIT and not otherwise recognized. (this can happen when a transponder is new) ⊺ Press - Save : Save the current setting of DiSEqC 1.2 system. under ‘SCAN’ to scan the selected satellites. <Figure 6.1.6> (When the DiSEqC Motor parameter is set as USALS) - Move : Move the dish position to west/east by pressing - Motor Control : Control motor by / buttons. press button on the remote. ҮGoto Reference : Move the dish to the 0 position. ҮDisable Limit : Disable east and west limit. ҮEnable Limit : Enable the saved east and west limit. ҮSet East Limit : Edit & Save east limit by pressing / ҮSet West Limit : Edit & Save limit by pressing or / or buttons. buttons. - Sat Degree : Satellite location. - Antenna Position : Press <Figure 6.1.5> <Figure 6.1.6> . ҮGoto Reference : Move the dish to the reference 0 position. ҮAntenna Longitude : Your longitude at present. ҮAntenna Latitude : Your latitude at present. ҫ Note : You need to know what LNB you are using to correctly set the L.O. (localoscillator) frequency. ҫ Note : You need to understand how your receiver is connected to properly set the 22KHz and DiSEqC. ⊾ When you are done, press the EXIT button. 14 button on the - Search Type : Decide for which channels to search (All channels/ Free channels only/ TV channels only). ҮGoto Reference : Move the dish to the 0 position. ҮSet East Limit : Edit & Save east limit by pressing Through this function, the receiver searches for all the available channels and saves them in memory. 15 English - Move : You can move the dish to the West/East. 6.1 Getting Started 6.1 Getting Started ᶀ Blind Scan <Figure 6.1.7> ⊺ Press / to set the “TP” and “Pol” and “Mode” options. - TP : Select TP frequency - Pol : Select Vertical / Horizontal / All. - Mode : All / Free / TV ҮAll : To search all the Free To Air and scrambled channels, TV & Radio channels. ҮFree : To search Free To Air channels only. ҮTV : To search TV channels only. ⊻ SCAN : Begin channel search of the selected satellites. ᶀ Manual Scan <Figure 6.1.8> ⊹ Select a transponder. ⊺ To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC buttons. ⊻ To add a new transponder, press the GREEN button. ⊼ To delete a transponder, press the YELLOW button with the cursor next to the Frequency parameter. ⊽ To search a transponder, set its different parameters and press . <Figure 6.1.9> ҫ Note : If you cannot access programs after correctly completing a scan procedure, please contact your seller or your installer. ᶀ Fast Scan <Figure 6.1.10> ⊹ For Provider choose Canal Digitaal or TV Vlaanderen or TeleSat. ⊺ For CHs Renumber select ON/OFF ⊻ Press the Red button. <Figure 6.1.7> <Figure 6.1.8> <Figure 6.1.10> 16 <Figure 6.1.11> 17 English ⊹ Select the satellites you want to search by pressing the button on the remote. ᶀ Package Identifier (PID) Scan <Figure 6.1.9> ⊹ Select a transponder. ⊺ To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC buttons. ⊻ To add a new transponder, press the GREEN button. ⊼ To delete a transponder, press the YELLOW button with the cursor next to the Frequency parameter. ⊽ To search a transponder, set its different parameters and press . You can / search a specific channel of the transponder by setting its PID data (Video, Audio and PCR). 6.1 Getting Started 6.1 Getting Started 6) Channel Selection 7) Other Functions of the Remote Control / to navigate between channels until you find the channel you ᶀ Volume Control ⊹ While watching a program, press ᶀ If you know the channel number, you can enter it with the NUMERIC buttons and wait 2 seconds until the channel is changed. ᶀ If you know the channel name or transponder or CAS, you can press channel list <Figure 6.1.12> or to control the volume. ⊺ You can press the MUTE button to remove the sound of the program: the mute icon will be displayed. Press the MUTE button again to turn the sound back on. to display the ᶀ Channel Information ⊹ You can press the INFO button to display the information banner for a few seconds. ⊺ If you then press the INFO button again, a detailed banner will be displayed. ᶀ TV/ RADIO switching You can press this key to change from a TV channel to a Radio channel or vice versa. ᶀ RECALL Press to return to the previous channel. <Figure 6.1.12> ⊹ In the right side of screen, detailed information about the selected channel will be displayed. (Satellite Name, Frequency(Polar) and Channel Name) ⊺ You can use the following buttons to navigate between channels: - / / : Moves one channel up/ down. : Moves one page up / one page down. - RED : Shows all channels in the current group. - GREEN : Shows all channels sorted alphabetically. - YELLOW : Shows all channels sorted by Transponder. ᶀ Audio Press to adjust the subtitle and/or audio status of the current channel: - Audio Mode : Select between, Stereo ᵎ Mono-Left ᵎ Mono-Right - Audio Track : Select between tracks available in this program - Audio Level : Select between, High ᵎ Medium ᵎ Low ҫ Note : These subtitle and audio parameters are workable only when the desired channel supports these functions. ᶀ TEXT The Teletext service is a text data service sometimes available from the Service Provider. - BLUE : Shows all channels sorted by CAS system. ⊻ Press when the selection bar is positioned on the desired channel. ᶀ FREEZE You can press this key to freeze the video. Press it again to resume the video. ᶀ GROUP When watching TV or listening to Radio, you can press this button to view the list of satellites and/or favorite channel groups. Only registered satellites and favorite groups are displayed. 18 19 English You can use want. 6.1 Getting Started 6.1 Getting Started ᶀ Multi Picture Display <Figure 6.1.13> ᶀ SUBTITLE <Figure 6.1.16> You can press to select the subtitle language of current channel. ᶀ SLEEP <Figure 6.1.17> You can set the your receiver to turn off after a few minutes. Press timer. - To cancel the sleep timer, please press (Disable, 10, 20, 30, 60, 100, 120 Minutes) to set the sleep until you set time as “0 min”. <Figure 6.1.13> ᶀ ZOOM You can press to zoom in the video. <Figure 6.1.14> ⊹ Press the PAUSE button and press <Figure 6.1.15> . You can zoom in sections of Freezed Video ⊺ While watching a program, press . You can zoom in sections of playing video. ⊻ To cancel the freeze status, please release the zoom status. <Figure 6.1.16> <Figure 6.1.17> ᶀ V.FORMAT <Figure 6.1.18> You can press 576p, 576i). to change the video resoultion Select between, (1080p, 1080i, 720p, ᶀ WIDE <Figure 6.1.19> You can press to change the TV aspect ratio. - 4:3 : Pan-Scan or Letter-Box -16:9 : Full-Screen or Pillar-Box <Figure 6.1.14> <Figure 6.1.15> <Figure 6.1.18> 20 <Figure 6.1.19> 21 English You can press to display multiple pictures; you can choose the number of pictures such as 1X2, 2X2, 2X3 or 3X3. 6.1 Getting Started 6.2 System Setting ᶀ Informaion bar <Figure 6.1.20> 1) Time Settings - GMT Usage : Set this ON for the local time to be determined by adjusting the time difference with the GMT (Greenwich Meantime) according to your location. - Current Date : If GMT Usage is OFF, you can modify the date by pressing <Figure 6.1.20> . - Current Time : If GMT Usage is OFF, you can modify the time using the NUMERIC buttons. - Summer Time : Select the period during which Summer Time is in force. 1 Navigation key up / down - Local Offset : If GMT Usage is ON, Local time is GMT time + Local Offset. 2 Channel number - Wake Up Mode : Select the wake up frequency. (Off/Once/Daily) 3 Channel name - Wake Up Time : Set the wake up time using the NUMERIC buttons. 4 Group / Satellite or Favorite 5 Clock 6 Video Format Resolution/Output 7 Program (current) ,Program (next) - Automatic Standby : Selects auto standby time (OFF/After 1~8Hour) After making your selection press to confirm 8 Channel with Teletext - Timer Lead Time : Press 9 Channel with Subtitles 10 Stereo 11 Dolby Digital 12 Channel in HDTV 13 Channel with Scrambling / Pay TV 14 Volume 15 Signal Quality Level - Wake Up Channel : Press to set the wake up channel. - Sleep Mode : Select the Sleep frequency. (Off/Once/Daily) - Sleep Time : Set the sleep time using the NUMERIC buttons. to set the Timer Lead In And Lead Out Time. <Figure 6.2.1> 22 23 English This submenu allows you to set your local time, wake up time, wake up channel and sleep time. <Figure 6.2.1> 6.2 System Setting 6.2 System Setting 2) A/V Output Settings 3) OSD Settings - Audio Language : Set the default audio language when selecting a channel. This submenu allows you to set the menu language, OSD transparency and Information and Volume timeouts. <Figure 6.2.3> - Subtitle Language : Set the default subtitle language. - Menu Language : Select the desired language for the menu. - TV Type : Select the TV type. - Transparency : Set the OSD transparency of the menu. (1% ~ 100%) - SCART : Select the SCART output.(CVBS/RGB) - Information Timeout : Select the display duration of the information banner. (1, 2, 3, 5 or 10 seconds) - Screen Format : Select the screen format. (16:9 / 4:3) - Display Format : Select the TV aspect ratio(Letter Box/Pan Scan, Full Screen/Pillar Box) - Video Format : Select the Scanning type(Interaced, Progressive) - Digital Audio : Select the Audio output type (Dolby SPDIF / PCM / DOLBY HDMI) - Volume Timeout : Select the display duration of the volume box. (1, 2, 3, 5 or 10 seconds) - Use Recall list : Store previous channels. If you press recall key on RCU then you will show recall list. PCM - Select this option only if the stereo system or amplifier cannot decode Dolby DOLBY SPDIF / DOLBY HDMI - Select this option only if the stereo system or amplifier can decode both Dolby Digital and Linear PCM signals. - SPDIF Latency : Audio delay is adjustable as 10ms between 0 and 500ms(max.) at optical output. <Figure 6.2.3> 4) Front Display Setting TThis submenu allows you to set the Standby Mode. <Figure 6-2-5> - Standby Mode : Select the standby Mode. (Normal / Power Saving) <Figure 6.2.2> <Figure 6.2.4> 24 25 English This submenu allows you to specify the audio/video output. <Figure 6.2.2> 6.2 System Setting 6.2 System Setting 5) Security Settings 6) Database Reset This submenu allows you to restore the factory set values (useful when encountering problems after changing settings). <Figure 6.2.6> - Receiver Lock : Set ON to require entering a PIN code at powering on. - Delete Radio Channels : Erase all radio channels in the database. - Install Lock : Set ON to require entering a PIN code to access the installation menu. - Delete Scramble Channels : Erase all scramble channels in the database. - Channel Lock : Set ON to require entering a PIN code to access the channels menu. - Delete All Channels : Erase all channels. - Lock Channel Confirm : Set ON to require entering a PIN code to access a locked channel. - Factory Set : Erase all channels and restore the factory default settings. - Age Limit : Set to prevent children or unauthorized people from watching programs. Select among (Free/ 8 above/12 above/15 above/18 above). When program information (age limit) is available from broadcaster and this age limit exceeds the selection, a PIN code is required to access the channel/program. - Current Password : To change your password, first enter your current password. - New Password : Enter the new password that you want to set. - Verify Password : Enter the new password again for confirmation. ҫ Note : The default password is ‘0000’. <Figure 6.2.6> <Figure 6.2.5> 26 27 English This submenu allows you to set password options and to lock or unlock access to menus (Note : PIN code and password are the same). <Figure 6.2.5> 6.2 System Setting 6.3 Channels 7) IP Setting 1) Set Favorites This submenu allows you to set up favorite groups of channels. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. The receiver supports 16 favorite groups. ⊹ Press on ‘Set Favorites’. The list of groups will be displayed. <Figure 6.3.1> ⊺ Press and to choose a group. The following menu will be displayed. / <Figure 6.3.2> If you want to change the name of a favorite group, press the RED button. ⊻ Press to add (or remove if previously added) the selected channel to/from the favorite channel group. ⊼ Press the EXIT button to return to the previous menu. <Figure 6.2.7> - Firmware update : Support download from a LAN. <Figure 6.3.1> <Figure 6.3.2> ͈ BLUE button, appear input target IP address. ͉ button to connect after input a target IP. ͊ Choose a update software and (OK)button for downloading. ҫ Note : Have to run PC tool before connect PC. <Figure 6.2.8> 28 29 English If the Network supports DHCP , IP settings can be allocated automatically. If the Network does not support DHCP, the Addresses must enter manually (Static IP).<Figure 6.2.7> - DHCP Usage : On/Off to receive IP settings automatically - IP Address : Here enter the IP address - Subnet Mask : Here enter Subnet Mask Number from your Network - Gateway : Here enter IP address of Gateway (e.g. router) - DNS : Here Enter IP address of main DNS Server - Mac Address : Mac Address display 6.3 Channels 6.3 Channels 2) Edit Channels 3) Move Channels ⊹ Press on ‘Edit Channels’. The following menu will be displayed. <Figure 6.3.3> This submenu allows you to move channels. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list group by pressing the GROUP button. ⊺ Press on the channel that you want to edit. ⊹ Press on ‘Move Channels’. The following menu will be displayed.<Figure 6.3.4> on ‘Edit Name’ to rename the channel; the keypad will be displayed. ⊺ Press on the channel that you want to move; a ‘move’ icon will be displayed. ⊻ Press ⊼ Similarly, you can edit the PID data using the NUMERIC keys. ⊻ Use the ҫ Note : The VIDEO PID, AUDIO PID and PCR PID are very important for optimal satellite signal reception. We recommend you get professional advice where available. ⊼ Press <Figure 6.3.3> 30 / / / / NUMERIC buttons to move the selected channel. again to place the channel. ⊽ Press the EXIT button to return to the previous menu. <Figure 6.3.4> 31 English This submenu allows you to rename channels and input user PID. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list group by pressing the GROUP button. 6.3 Channels 6.3 Channels 4) Lock Channels 5) Skip Channels This submenu allows you to skip channels. Once a channel is set to be skipped, it will be whenever you navigate channels using / in non-menu mode. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list group by pressing the GROUP button. ҫ If you set ‘Lock Channel Confirm’ (refer to <6.2>security setting) to OFF, you will not be asked to enter a password even if the channel is locked. ҫ Note : You can still access a ‘skipped’ channel if you enter its number using the NUMERIC buttons in non-menu mode. ⊹ Press ⊹ Press on ‘Lock Channels’. The following menu will be displayed. <Figure 6.3.5> on ‘Skip Channels’. The following menu will be displayed.<Figure 6.3.6> ⊺ Press on the channel that you want to lock/unlock; the lock icon will be displayed/removed. ⊺ Press on the channel that you want to skip/un-skip; the skip icon will be displayed / removed. ⊻ Press the EXIT button to return to the previous menu. ⊻ Press the EXIT button to return to the previous menu. <Figure 6.3.5> <Figure 6.3.6> 32 33 English This submenu allows you to lock channels to control access to them. Once a channel is locked, you will be asked to enter a password whenever you try to watch it. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list group by pressing the GROUP button. 6.3 Channels 6.4 Electronic Program Guide 6) Delete Channels 1) EPG ҫ Note : Be careful! If you delete a channel, you will not be able to access it again until you rescan. ⊹ Press on ‘Delete Channels’. The following menu will be displayed. <Figure 6.3.7> ⊺ Press on the channel that you want to set/unset for deletion; the delete icon will be displayed/removed. ⊻ Press the INFO button to delete all channels in the current list; you will be asked to enter your password. ⊼ Press the EXIT button to return to the previous menu and confirm deletion. This submenu allows you to access the electronic program guide when available. ⊹ Press the GUIDE button to display the guide menu. <Figure 6.4.1> ⊺ Press ⊻ Press ⊼ Press / to see the previous/next guide. / / / to select another channel. <Figure 6.4.1> to watch the selected channel and access its EPG data. If you press in the right side of the screen (Event display list). - If the current time EPG is selected, you will return to the previous menu and get signal from the selected channel. - If a future time (next) EPG is selected, the selected program will be reserved and the event color will change. ⊽ You can select TV or Radio channels by pressing the TV/RADIO button ⊾ You can choose a channel list group by pressing the GROUP button. ⊿ You can access the timer menu by pressing the RED button. <Figure 6.4.2> 2) Timer This sub menu allows you to set the on/off time of your receiver. ⊹ This submenu allows you to set on/off times of your receiver. To display the timer menu, press the RED button while in the guide menu. <Figure 6.4.2> <Figure 6.3.7> ⊺ Press ⊻ Press to select a timer’s parameter. / to change the parameter. - Timer No : Select the timer that you want to modify. (1- 8) - State : Select the timer frequency. (off/once/daily/weekly) - Date : Press to display a Calendar pop-up; Select a date - Start Time : Input the time for your receiver power-on; use the NUMERIC buttons - End Time : Input the time for your receiver power-off; use the NUMERIC buttons - Channel : Press to display a Channel list pop-up; Select a channel - File Name : You can change recording file name. - Record : Set record On/Off. 34 35 English This submenu allows you to delete channels. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list group by pressing the GROUP button. 6.4 Electronic Program Guide 6.5 Games 1) Tetris on ‘Tetris’. The following menu will be displayed. <Figure 6.5.1> ⊺ You can choose a skill level using / . ⊻ Press to start the game <Figure 6.5.2>, or press the EXIT button to return to the previous menu. ⊼ Press ⊽ Press ⊾ Press to rotate a block. / to move a block. to drop a block. ⊿ You can see the next block in the top-right small window. <Figure 6.4.1> <Figure 6.4.2> ⋀ Press the EXIT button to quit the game. - If you want to record a program in the right side of the screen, you can select a program by using . The selected program will be reserved and the evnet color text will change to red. <Figure 6.4.3>. - You can also see change the timer menu.<Figure 6.4.4> <Figure 6.5.1> <Figure 6.4.3> <Figure 6.5.2> <Figure 6.4.4> 36 37 English ⊹ Press 6.5 Games 6.5 Games 2) Sokoban 3) Snake ⊹ Press on ‘Sokoban’. The following menu will be displayed. <Figure 6.5.3> ⊺ You can choose a skill level using / . ⊹ Press on ‘Snake’. The following menu will be displayed. <Figure 6.5.5> ⊺ You can choose a skill level using / . ⊻ Press to start the game <Figure 6.5.6>, or press the EXIT button to return to the previous menu. ⊼ Press / / / to move. ⊻ Press to start the game <Figure 6.5.4>, or press the EXIT button to return to the previous menu. ⊽ Pass through the GREEN icon to increase your score; the length of the snake increases. ⊼ Press ⊿ Avoid the BLACK icons. If you hit a BLACK icon (block), the game ends. / / / to move. ⊽ Press the RED button to undo the previous move. You can undo only one step. ⊾ Pass through the RED icon to decrease the snake’s length. ⋀ Press the EXIT button to quit the game. ⊾ Press the GREEN button to restart the game. ⊿ Press the YELLOW/BLUE buttons to jump to the previous/ next level. You can jump only between completed levels. ⋀ Press the EXIT button to quit the game. <Figure 6.5.5> <Figure 6.5.6> 4) Calculator This submenu allows you to use a calculator on the screen. <Figure 6.5.7> <Figure 6.5.3> <Figure 6.5.4> - You can switch between Hex (Hexadecimal) and Dec (Decimal) basis for arithmetic with the RED button of the remote control unit. - Use the Numerical and the / / buttons on the remote control unit. <Figure 6.5.7> 38 39 English How to play Sokoban: you have to push the balls to their correct positions. The balls can only be pushed, never pulled, so you have to be careful not to push them into a corner where you can’t get them out from. You can only push one ball at a time. 6.6 Storage This submenu allows you to play various MP3 files, view JPG files or download a new software by connecting your USB flash drive. 2) JPG menu ͈ Press ͉ Press 1) MP3 menu ͈ Select the MP3 file you want to play back by using <Figure 6.6.1> / , in the file list. ͉ Press the EXIT button to hide the file list. You can then select an option using . <Figure 6.6.2> ͊ You can then change the volume by pressing / / , / to select a picture. <Figure 6.6.3> to show the picture you want to display. - RED : Sets the time interval between slides. - GREEN : Selects slide show. - YELLOW : Choose the Hard disk volume or usb device with USB hub. - BLUE : Rotate the picture. - FILELIST : Shows/Hides the JPEG file list. . ͋ Press on to display the MP3 file list. ͌ Press on to display information about the selected MP3 file. - FILELIST : Shows/Hides the MP3 file list - INFO : Shows information about the MP3 file you selected. - YELLOW : Choose the Hard disk volume or usb device with USB hub. <Figure 6.6.3> 3) Data Transfer menu ͈ Select the software you want to download by using <Figure 6.6.4> / in the list ͉ Press <Figure 6.6.1> <Figure 6.6.2> to start software downloading - RED : Upload the current CNDF(compressed dish and channel data file). - YELLOW : Choose the Hard disk volume or usb device with USB hub. - BLUE : Upload the current software. ҫ Warning : Please do not switch off your receiver before software downloading is completed. <Figure 6.6.4> 40 41 English 6.6 Storage 6.6 Storage 6.6 Storage 4) Disk Manager 5) File manager ͈ Press YELLOW button for connect PC. - Disk Information : Choose the Hard disk volume or usb device with USB hub. You can view a information of usb devices (used size, total size, free size) <Fig 6.6.5> ͉ Press button after input IP address of PC. ͊ Press button after choose target. - Chek Disk : Choose the Hard disk volume or usb device with USB hub. You can check the usb devices. <Fig 6.6.6> ҫNote : Have to run PC tool before connect PC. <Figure 6.6.8> <Figure 6.6.5> <Figure 6.6.6> - Format Disk : You can format the usb devices. <Fig 6.6.7> English - Default Disk : Set the pvr disk. <Figure 6.6.9> ͋ Press RED for chooses files. ͌ Press button to choose Copy/Move/NewFolder/Delete/Rename after press MENU button. ͍ If select copy or move, press button to move target for paste. ͎ Press MENU button to paste taget. ͏ Select a Paste for Copying or Moving files. <Figure 6.6.7> - Testing USB Speed : USB speed test. - Timeshift Rec Time : You can change default timeshift recording time. - Auto Timeshift : Set automatic timeshift On/Off. - Skip Time : Set jump time when you press / key on RCU during file playback. - HDD Sleep Time : HDD is change sleep mode after selected time. 42 <Figure 6.6.10> <Figure 6.6.11> 43 6.7 System Information 6.8 Common Interface English You can check the current information about your receiver such as receiver model name, S/W (software) version, H/W (hardware) version, manufacturing date, etc. <Figure 6.7.1> ҫ Note : This information is useful to download new software and/or repair the receiver. <Figure 6.8.1> <Figure 6.7.1> 2) The Status of the CAM ⊹ You can access detailed information about the CAM using the Main Menu to select ‘CI’ and pressing . <Figure 6.8.2> / keys in the ⊺ Proceed with further instructions displayed on the screen to check more detailed information depending on the CAM in use. ҫ Note : Further detailed information is not mentioned in this manual since the information depends on the CAM in use. 6.8 Common Interface 1) CAM Initializing To enjoy scrambled channels, you will need a Common Interface Conditional Access Module (CAM) and a Smart Card from the service provider (program distributor). If you are subscribing to services from more than one service provider, you will need a Smart Card from each one, and may even need different CAMs (depending on the DVB Common Interface standard each uses). Since a Smart Card is connected to a single service provider, a limited range of channels will be available via it. ҫ Note : Without the CAM and the smart card, you can watch only Free-to-Air programs. ⊹ Insert a CAM into a receiver’s slot designed for it, and a Smart Card into the CAM. ⊺ The message ‘CAM Initializing’ will appear on the screen. <Figure 6.8.1> <Figure 6.8.2> ⊻ After the message ‘CAM Initializing’ has disappeared, you can select the channel that you want to watch. 44 45 6.9 Conditional Access System 6.9 Conditional Access System 1) Card Initializing 2) The Status of the Smart Card ҫ Note : Without the Smart Card, you can watch only Free-To-Air programs. ͈ Insert the Smart Card into the receiver’s slot designed for it. ͈ You can access detailed information about the Smart Card using the in the Main Menu to select ‘CA’ and pressing . <Figure 6.9.2> ͉ Proceed with further instructions displayed on the screen to check more detailed information depending on the Smart Card in use. ҫ Note : Further detailed information is not mentioned in this manual since the information depends on the Smart Card in use. ͉ The message ‘Smart Card Initializing’ will appear on the screen. <Figure 6.9.1> ͊ After the message ‘Smart Card Initializing’ has disappeared, you will be able to watch the channels offered by the service provider. <Figure 6.9.2> <Figure 6.9.1> 46 / 47 keys English To Enjoy CONAX CAS7 scrambled channels, you will need a Smart Card from the service provider (program distributor). If you are subscribing to services from more than one service provider, you will need a Smart Card from each one. Since a Smart Card is connected to a single service provider, a limited range of channels will be available via it. 6.10 PVR 6.10 PVR ᶀ Edit Menu 1) File List ⊹ Press to show the file list. Select the file you want to play back by using , / . ⊺ Press . In the right side of screen, detailed information about the selected file will be displayed. (Recorded Date/Time, Used size, Total Size) <Figure 6.10.1> - To see a full screen, press appear. <Figure 6.10.2> once more. And then the following time-bar will You will be asked to enter a password whenever you try to enter it. Press up menu for selection will appear<Figure 6.10.3>. . The pop- Select the item that you want to edit, and set its parameters as desired ⊹ Normal Mode : Press ⊺ Lock Mode : Press ͊ Delete Mode : Press on the file that you can see the preview of a selected file. on the file that you want to lock/unlock. on the file that you want to delete. - GROUP : Select between, File Mode Ƒ Dir Mode - ADVANCE : Shows all sorted files. Select between, Sort by name Ƒ Sort by time. ҫ If you set ‘Channel Lock’ (refer to <Figure 6.2.4>security setting) to OFF, you will not be asked to enter a password even if the channel is locked. ͋ Rename Mode : Press the <Figure 6.10.1> button on the file that you want to rename. <Figure 6.10.2> <Figure 6.10.3> 48 49 English ᶀ File Playback 6.10 PVR 6.10 PVR ᶀ RWD(Rewind) 3) Trick Mode When playing the file, you can press to adjusting the playing speed. <Figure 6.10.6> The speed will change to x2, x4, x8 and x32. ᶀ Slow(1/2x, 1/4x) ᶀ PLAY This button will display a time- banner. If you want to show the play list while playing the file by using . When playing the file, you can press to adjusting the playing speed. <Figure 6.10.7> ᶀ Timeshift (PAUSE in playback mode) This button will pause the playing file until you play again with 6.10.4> or . <Figure ᶀ ADVANCE - If the time-shift mode is enabled, You can press to jump the live program. - If the playback mode is enabled, You can press and then jumping the live program. to stop the current playing file <Figure 6.10.6> ᶀ FF(Fast Forward) - When playing the file, you can press <Figure 6.10.7> to adjusting the playing speed.<Figure 6.10.5> ᶀ Jump - The speed will change to x2, x4, x8 and x32. - You can locate the control position to the desired position by using the / . - If you press this key continuosly, You can locate the control position to the desired position very quickly. <Figure 6.10.4> <Figure 6.10.5> 50 51 English You can operate the trick mode while you are playing the recording files. These functions are available in playback mode or time-shift mode powerfully. 6.10 PVR 6.10 PVR ᶀ Bookmark 4) Instant Recording - RED : Press this button and red small triangle cursor will be placed at that position. If you want to delete the bookmarked position, press a this button once more when red small triangle cursor appear. - GREEN : Press this button and the current position will jump to the next bookmarked position and playback starts from this point. - YELLOW : Press this button and the current position will jump to the pre-bookmarked position and playback starts from this point. ⊹ You can record a current channel by using be displayed.<Figure 6.10.11> . If you then press , a time-banner will ⊺ Press once more. The following picture shows that you can select item when you record a current channel. <Figure 6.10.12> - Channel : It shows a current channel. - Name : It shows a current recording name. - Duration : You can change the duration of recording time by using the / . And current recorded time appear. ҫ Note : The maximum number of the bookmark is 20 in a file. <Figure 6.10.11> <Figure 6.10.12> ҫ Note : 1. Do not remove the USB device while recording a program. <Figure 6.10.8> - BLUE : Press this button and edit(copy, cut) the file. <Figure 6.10.9> Press button to select edit start position and one more edit end position. Select cut or copy. <Figure 6.10.10> 5) Record Stop button to select ⊹ Press the STOP button on the remote to stop the recording then Record Stop will be displayed. ⊺ Select the recording file by OK / STOP button. ⊻ Press EXIT button then selected recording is stopped. <Figure 6.10.13> <Figure 6.10.9> <Figure 6.10.10> <Figure 6.10.13> 52 53 English To mark a specific place in a file for later retrieval. <Figure 6.10.8> 6.10 PVR Troubleshooting 6) Timer Recording There may be various reasons for the abnormal operation of the unit. Therefore, if the unit does not work properly, check it according to the procedures shown in the table below: Problem 7) Time Shift ⊹ If you want to pause and resume live TV channel, press PAUSE button. The default time of Time-Shift is 30 min in your STB.<Figure 6.10.14> No Picture or sound. ͊ The trick-mode operations are provided. If you want to jump to live channel, please press . Wrong connection of the Connect the two terminals video/audio output to the correctly with RCA or RF cable(s), TV input terminal. SCART or HDMI cable(s). Wrong direction of the satellite antenna. Adjust the direction of the antenna. No signal or weak signal. Check the cable connections, the LNB and other equipment connected between the LNB and the receiver, or adjust the antenna. Wrong setting of channel Type the setting values correctly. information in the MENU screen. Black-and-white screen or V-Hold. Your TV mode (PAL/NTSC) Use a TV of the same mode. is different from the satellite broadcasting mode. Connect a NTSC/PAL converter between the receiver and the TV. The remote controller is not working. Batteries are exhausted. Press (F1 key) button to display Media file list. Press button to play the selected file. Change the batteries. Fluorescent light is interfering Switch off the light. with the remote controller. Remote controller is incorrectly aimed. 54 Connect the power cord properly into the power socket. Wrong connection of the Connect the antenna cable satellite antenna cable. correctly. <Figure 6.10.15> 8) Media File Playback Remedy The LED light on the front The AC power cord is disconnected. panel does not light. ⊺ If you want to resume live TV channel, press PLAY button. <Figure 6.10.15> <Figure 6.10.14> Possible causes 55 Aim the remote control at the receiver. English This function is availabe when usb device is connected. You can choose a channel to record the Program Guide menu by using . (Refer to 6.4 Electric Program Guide, 2)Timer) Specifications NEC-IR System capabilities Fully DVB compliant Operating condition up to 7 Meter USB USB Supply(Rear) DC 5V Max 500mA Power supply Power consumption max 30W satellite Connector IEC 169-24, female LNB/Tuner input Frequency range 950MHz ~ 2150MHz Supply voltage 100V ~ 250V Signal level -65dBm ~ -25dBm Supply frequency 50Hz ~ 60Hz LNB supply DC 13/18V, max 400mA Demodulator LNB switch control 22KHz DiSEqC Ver 1.0/1.1/1.2/USALS Compatible Front end DVB-S/S2 QPSK, 8PSK Symbol rate DVB-S : 2~45Msps Standby power consumption max 1W Rear Panel TV SCART CVBS, RGB Video output Loop-through RGB output connectors Audio Out VCR SCART Video Out(CVBS) Video In(CVBS, RGB) DVB-S2 : 10~30Msps(QPSK) 10~30Msps(8PSK) Audio Out(L, R) SCPC and MCPC Capable Video 1 X RCA cinch Auto conversion Audio L/R 2 X RCA cinch Processor 32bit processor (450MHz) Component(Y/Pb/Pr) 3 X RCA cinch DDR SDRAM 64Mbyte X 2 FLASH 8Mbyte EEPROM 256Kbit MPEG 2 MPEG-2, MPEG-4, H.264 HDMI 1 X HDMI Data Rate up to 15M bits/s USB USB A-type Resolution 720 X 576P/i, 1280 X 720P, 1920 X 1080i/P LAN RJ-45 Video format PAL 4:3,16:9 Size (W X H X D) Weight (Net) 260 X 232 X 54(mm) Aspec Ratio Spectral inversion System resource Video decoder Teletext DVB compliant MPEG Audio MPEG 1 layer I/II, Physical Specification Serial data 9pin D-sub Digital tuner input IEC 169 - 24 Loop-through Digital tuner IEC 169 - 24 S/PDIF Fiber Optic 1.8 Kg Disposal of Old Electrical & Electronic Equipment(Applicable in the European Union and other European Countries with separate collection systems) MPEG 2 layer II, AC3 Dolby Digital Type Mono, Stereo, Joint Stereo Sampling rates 32, 44.1 and 48 KHz Serial data interface Connector 9pin D-sub male, Max 115K bps 56 This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipnent. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropirate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. 57 English Code Remote control ">
Advertisement
