On-Machine Distributed I/O

On-Machine Distributed I/O
On-Machine Distributed I/O
On-Machine Distributed I/O
General
Table of Contents
On-Machine Distributed I/O
1732 ArmorBlock and 1732D/E Armor WeldBlock I/O .....10-3
1732DS ArmorBlock Guard I/O.......................................10-10
1738 ArmorPoint I/O .......................................................10-13
6-Ethernet
Switches
Safety
Connection
PannelConnect
10-Distributed
I/O
9-Ethernet
Switches
Cat. No. Index...................................................................12-1
Quick Selection
Quick Selection Guide.......................................................10-2
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-1
On-Machine Distributed I/O
Quick Selection Guide
General
Quick Selection
I/O Types
1732 ArmorBlock and 1732D/E Armor
WeldBlock I/O
1732DS ArmorBlock Guard I/O
1738 ArmorPoint I/O
Digital 24V DC
Digital 24V DC
Digital, Analog, AC, DC, Relay,
Thermocouple, RTD
9-Ethernet
Switches
Module Density
8 or 16 points per block
8 or 16 points per block
2 to 8 points per module
Specialty Modules
Dual-port EtherNet/IP, configured as
embedded switch
⎯
• 30 types
• Serial Synchronous Interface (SSI)
• Very High Speed Counter
• RS232
• RS485
• Incremental Encoder
• Extension cables for I/O and
ArmorStart
Network Connectivity
DeviceNet, EtherNet/IP, PROFIBUS DP
DeviceNet
DeviceNet (including SubNet
connectivity), ControlNet, EtherNet/IP,
PROFIBUS DP
Environmental Style
IP69K, NEMA 4X
IP67
IP69K, IP67 (AC)
Max. Modules per Node
1 block
1 block
Up to 63 modules
Additional Information
See page page 10-3
See page page 10-10
See page page 10-13
For product certification information go to http://www.ab.com/certification.
10-Distributed
I/O
PannelConnect
Safety
Connection
6-Ethernet
Switches
Visit our website: www.ab.com/catalogs
10-2
Publication M117-CA001A-EN-P
On-Machine Distributed I/O
1732 ArmorBlock I/O
Features
The 1732 ArmorBlock I/O modules are designed for back-panel or
On-Machine mounting. The 8-point modules can be front or side
mounted, the 8- or 16-point modules can be horizontally or
vertically mounted. Enclosure costs are eliminated because each
block is packaged in a rated sealed housing. I/O terminations are
DC micro (M12) quick-disconnects or pico (M8) quick-disconnects.
These modules do not require a separate base.
Quick Selection
Armor WeldBlock Product Design
The 1732 Armor WeldBlock is designed for use in typical welding
applications. The design resists the effects of weld slag and
magnetic fields found in close proximity to the weld head. The
sealed, light-weight metal housing of nickel-plated aluminum,
protects the electronics, which are the same as those in other 1732
ArmorBlocks. This is ideal for end-of-arm robot applications. Armor
WeldBlocks are available in DeviceNet and EtherNet/IP with 24V DC,
16-point inputs only, or 16-point self-configuring I/O. I/O and
network connections are DC Micro (M12).
6-Ethernet
Switches
Safety
Connection
PannelConnect
Sealed housing rated for IP69K and NEMA 4X eliminate enclosure
costs
Low installation cost and easy to replace without rewiring because
industry-standard mini or M12 DC micro connectors are used for
connection to the DeviceNet network and auxiliary power supply.
I/O connectors are sealed M8 pico or M12 DC micro styles
8 and 16 point self-configuring I/O allows the input/output mix to a
granularity of one
Dual-port EtherNet/IP, configured as an embedded switch,
supports star, tree, linear, and ring topologies
Isolated auxiliary power maintains power to the outputs if the main
power fails so that you can have the option of holding outputs in
their last state
Outputs electronically protected
Complies with Open DeviceNet Vendor Association, Inc. (ODVA)
conformance test software
I/O blocks are available with 8 or 16 I/O points. Electronic fusing
provides protection for output load devices and easy resetting. Units
are available as 8 or 16 inputs, 8 or 16 outputs, or 8 or 16 selfconfiguring modules. The self-configuring modules contain both
input and output functionality. With these self-configuring modules,
it's not required to “configure” anything and any combination of
input and outputs are available (for example, 7+1, 11+5, 4+4). The
self-configuring units have automatic output monitoring.
9-Ethernet
Switches
The 1732 ArmorBlock® I/O family features space-saving,
inexpensive, sealed-housing digital I/O blocks suitable for OnMachine™ mounting. 1732 ArmorBlock I/O is available for
DeviceNet™, EtherNet/IP™, and PROFIBUS™ communication
networks. Armor™ WeldBlock I/O modules are suited for use in
typical welding applications. Up to sixteen 24V DC points can be
addressed per node. A secondary enclosure is not necessary to
house these modules.
10-Distributed
I/O
Description
General
Product Design
The 1732 ArmorBlock I/O modules have a compact style with a low
profile. The 1732 ArmorBlock modules are packaged in a sealed
housing rated for IP67, IP69K, and NEMA 4X. A 1732 ArmorBlock
I/O module contains digital I/O circuits, a built-in power supply, and
a built-in DeviceNet, EtherNet/IP, or PROFIBUS DP I/O adapter.
Dual-port EtherNet/IP modules contain Stratix-compatible
embedded switch technology. The DeviceNet network supplies
power to the ArmorBlock system and, on some models, also to the
I/O. On those units with DeviceNet network powered I/O, a
diagnostic bit is provided for short circuits and overcurrent. Inputs
and outputs are powered by an external 24V DC source which is
independent of the network. An external 24V DC power source is
required for PROFIBUS DP.
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-3
On-Machine Distributed I/O
1732 ArmorBlock I/O
Typical Configuration
DeviceNet Communication
General
A ControlLogix processor with 1756-DNB module
(or PLC processor with a 1771-SDN DeviceNet Scanner
or an SLC processor with a 1747-SDN DeviceNet Scanner)
Network
Power Supply
(1787-DNPS)
DeviceNet Network
1792D ArmorBlock
MaXum I/O
Quick Selection
Series 9000
Photoelectric
Sensors
Proximity
Sensor
1732D-IB8M8
24V DC 8 Input
with M8 Connector
1792D
CompactBlock I/O
Base Block
1791D
CompactBlock I/O
Expansion Block
1732D-OB8EM8
24V DC 8 Output
with M8 Connector
EtherNet Linear Network
POINT I/O
1734-AENTR
9-Ethernet
Switches
1783-ETAP
PC
PanelView Plus
CompactLogix
1769-L35E
10-Distributed
I/O
LINK 1
LINK 2
MOD
NET
EtherNet/IP
0
15
1
2
14
13
3
12
4
11
5
6
10
9
7
ControlLogix
1756-EN2TR
1783-ETAP
8
0
P
W
R
8
2
6
0
8
2
6
4
X100
4
X10
0
8
2
6
4
X1
ArmorBlock
1732E
PowerFlex 70
AC Drive
EtherNet Device Level Ring Network
PannelConnect
ControlLogix
1756-EN2TR
PC
1783-ETAP
PanelView Plus
1783-ETAP
Safety
Connection
1783-ETAP
PowerFlex 70
AC Drive
LINK 1
LINK 2
MOD
NET
EtherNet/IP
0
15
1
2
14
13
3
12
4
11
5
6
10
9
7
8
0
P
W
R
8
2
6
0
8
2
6
4
4
X10
0
8
2
6
X100
6-Ethernet
Switches
ControlLogix
1756-EN2TR
POINT I/O
1734-AENTR
X1
ArmorBlock
1732E
Visit our website: www.ab.com/catalogs
10-4
4
Publication M117-CA001A-EN-P
Pneumatic Valve
On-Machine Distributed I/O
1732 ArmorBlock I/O
General Specifications, DeviceNet Digital I/O
Meets IP65/66/67/69K (when marked), and NEMA 4X/6P with recepticle dust
caps or cable termination and NEMA 4X
Mounting Type
On-Machine, Panel
-40…85 °C (-40…185 °F)
Relative humidity
5...95% noncondensing
Operating shock
30 g
Nonoperating shock
50 g
Vibration
5 g at 10…500 Hz
c-UL-us, CE, C-Tick, EtherNet/IP, ODVA
Certifications1
1 When product is marked, see the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification details.
Dimensions and Weights
Description
Dimensions (HxWxD), Approx.
Weight
8-point ArmorBlock I/O Modules
179 x 37 x 43.25 mm (7.05 x 1.46 x 1.70 in)
0.20 kg (0.45 lb)
16-point ArmorBlock I/O Modules
179 x 65 x 43.25 mm (7.05 x 2.56 x 1.70 in)
0.34 kg (0.75 lb)
Cat. No.
1732D-IB8M8
1732D-IB8M12
1732D-OB8EM8
1732D-OB8EM12
1732D-8CFGM8
1732D-8CFGM12
1732D-IB16M12M12
1732D-IB16M12MINI
1732D-OB16M12M12
1732D-OB16M12MINI
1732D-16CFGM12M12
1732D-16CFGM12MN
Max.
Max.
Continuous
Surge/Inrush
Output Current Output Current
Rating per
Rating per
Point/Module
Point
9-Ethernet
Switches
ArmorBlock Digital I/O Blocks
DeviceNet Digital I/O Blocks
DeviceNet, 24V DC, 8 and 16 Point
Max. Current
for Input
Device Power
per Point
Potential Max.
Aux. Current
per Module
Network
Current Draw
Inputs (Sink)
Outputs
(Source)
8 Sink
0
⎯
⎯
0.8 A
0.45 A
100 mA
0
8 Source
0.5/4.0 A
1.2 A
⎯
4.0 A
100 mA
0.5/4.0 A
1.2 A
0.8 A
4.0 A
100 mA
8 self-configuring ‡
I/O Connectors
(8) M8
(4) M12
(8) M8
(4) M12
(8) M8
(4) M12
16 Sink
0
⎯
⎯
0.8 A
0.9 A
75 mA
(8) M12
0
16 Source1
2.0/8.0 A1
4.8 A
⎯
0.1/8.0 A
100 mA
(8) M12
0.5/8.0 A
1.2 A
0.8 A
0.9/8.0 A
100 mA
(8) M12
16 self-configuring ‡
1 Maximum current on all I/O connectors exceeds total for the module.
6-Ethernet
Switches
Safety
Connection
Module operation power and input device power, from Auxiliary Power Connector pins 2 and 3, are separate and isolated from the I/O output power, from
Auxiliary Power Connector pins 1 and 4. Both auxiliary power consumption totals need to be noted.
‡ Each of the self-configuring I/O points can be either an input (sink) or an output (source), for example: 16 points: 13 in –3 out, 6 in – 10 out, etc. or 8 points: 6 in
– 2 out, 1 in – 7 out, etc.
10-Distributed
I/O
-20…60 °C (-4…140 °F)
Nonoperating temperature
PannelConnect
Operating temperature
Quick Selection
Enclosure Type Rating
General
General Specifications
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-5
On-Machine Distributed I/O
1732 ArmorBlock I/O
DeviceNet and EtherNet/IP Digital I/O Blocks
DeviceNet Digital I/O Blocks with Network Powered I/O and Diagnostics
I/O diagnostics provide one fault bit per modules to indicate a short circuit or overcurrent on any I/O point. Inputs and/or outputs powered by
network where noted.
General
DeviceNet, 24V DC, 16 Point
Max.
Continuous
Output Current
Rating per
Point/Module
Max.
Surge/Inrush
Output Current
Rating per
Point
Max. Current
for Input
Device Power
per Point
Potential Max.
Aux. Current
per Module
Max. Network
Current Draw
for Module
Operation Plus
I/O
I/O Connectors
Inputs (Sink)
Powered by
Network
Outputs
(Source)
1732D-8X81212D
8 (2 each on 4
connectors)
8 (2 each on 4
connectors)
0.5/4.0 A
1.2 A
0.8 A
4.0 A
0.1 A + I/O (1.0
A max.)
(8) M12
1732D-8X81212HD
8 (2 each on 4
connectors)
8 (2 each on 4
connectors)
1.4/8.0 A1
3.1 A
0.8 A
8.0 A
0.1 A + I/O (1.0
A max.)
(8) M12
1732D-8I8O1212D
8 (1 on each
connector)
8 (1 on each
connector and
powered by
network)
0.5/4.0 A
1.2 A
0.8 A
⎯
0.1 A + I/O (5.0
A max.)
(8) M12
⎯
0.8 A
⎯
75 mA + I/O
(0.95 A max.)
(8) M12
Cat. No.
Quick Selection
16 powered by
0
⎯
network
1 Maximum current on all I/O connectors exceeds total for the module.
1732D-IB161212D
9-Ethernet
Switches
EtherNet/IP Digital I/O Blocks
EtherNet/IP, 24V DC, 8 and 16 Point
Max.
Max.
Continuous
Surge/Inrush
Output Current Output Current
Rating per
Rating per
Point/Module
Point
Max. Current
for Input
Device Power
per Point
Potential Max.
Aux. Current
per Module § I/O Connectors
10-Distributed
I/O
PannelConnect
Cat. No.
Inputs (Sink)
Outputs
(Source)
Dual-port
Support
1732E-IB16M12
16
0
⎯
⎯
5 mA at 30V
DC
8.0 A
(8) M12
⎯
1732E-IB16M12DR
16 inputs with
diagnostics
0
⎯
⎯
5 mA at 30V
DC
8.0 A
(8) M12
2 EtherNet/IP
ports♣
1732E-IB16M12R
16
0
⎯
⎯
5 mA at 30V
DC
8.0 A
(8) M12
2 EtherNet/IP
ports♣
1732E-IB16M12SOEDR
16 sequence of
events inputs
with
diagnostics
0
⎯
⎯
5 mA at 30V
DC
8.0 A
(8) M12
2 EtherNet/IP
ports♣
1732E-OB16M12
0
16
2.0 A/8.0 A 1
4.8 A for 10
ms, repeatable
every 2 s
⎯
8.0 A
(8) M12
⎯
1732E-OB16M12DR
0
16 outputs with
diagnostics
0.5 A/8.0 A
1.2 A for 10
ms, repeatable
every 2 s
⎯
8.0 A
(8) M12
2 EtherNet/IP
ports♣
1732E-OB16M12R
0
16
2.0 A/8.0 A 1
4.8 A for 10
ms, repeatable
every 2 s
⎯
8.0 A
(8) M12
2 EtherNet/IP
ports♣
1732E-8X8M12DR
8 inputs with
diagnostics
8 outputs with
diagnostics
0.5 A/4.0 A
1.2 A for 10
ms, repeatable
every 2 s
5 mA at 30V
DC
4.0 A
(8) M12
2 EtherNet/IP
ports♣
Safety
Connection
1732E-16CFGM12
16 self-configuring ‡
0.5 A/8.0 A
1.2 A for 10
ms, repeatable
every 2 s
5 mA at 30V
DC
8.0 A
(8) M12
⎯
1732E-16CFGM12R
16 self-configuring ‡
0.5 A/8.0 A
1.2 A for 10
ms, repeatable
every 2 s
5 mA at 30V
DC
8.0 A
(8) M12
2 EtherNet/IP
ports♣
1 Maximum current on all I/O connectors exceeds total for the module.
§ Pins 2, 3 for sensor source and module powe plus pins 1, 4 for output loads.
‡ Each of the self-configuring I/O points can be either an input (sink) or an output (source), for example: 16 points: 13 in –3 out, 6 in – 10 out, etc.
♣ Configured as embedded switch. Supports star, tree, linear, and ring topologies.
6-Ethernet
Switches
Visit our website: www.ab.com/catalogs
10-6
Publication M117-CA001A-EN-P
On-Machine Distributed I/O
1732 ArmorBlock I/O
Profibus Digital I/O, DeviceNet and EtherNet/IP WeldBlock
1732P-8CFGM8
1732P-8CFGM12
Inputs (Sink)
Outputs (Source)
8 Sink
0
⎯
⎯
0.8 A
0.45 A
0
8 Source
0.5/4.0 A
1.2 A
⎯
4.0 A
0.5/4.0 A
1.2 A
0.8 A
4.0 A
8 self-configuring ‡
I/O Connectors
(8) M8
(4) M12
(8) M8
(4) M12
(8) M8
(4) M12
1732P-IB16M12
16 Sink
0
⎯
⎯
0.8 A
1.0 A
(8) M12
1732P-OB16M12
0
16 Source1
2.0/8.0 A1
4.8 A
⎯
0.2/8.0 A
(8) M12
0.5/8.0 A
1.2 A
0.8 A
1.0/8.0 A
(8) M12
1732P-16CFGM12
16 self-configuring ‡
1 Maximum current on all I/O connectors exceeds total for the module.
9-Ethernet
Switches
Module operation power and input device power, from Auxiliary Power Connector pins 2 and 3, are separate and isolated from the I/O output power, from
Auxiliary Power Connector pins 1 and 4. Both auxiliary power consumption totals need to be noted.
‡ Each of the self-configuring I/O points can be either an input (sink) or an output (source), for example: 16 points: 13 in –3 out, 6 in – 10 out, etc. or 8 points: 6 in
– 2 out, 1 in – 7 out, etc.
Armor WeldBlock Digital I/O Blocks
DeviceNet WeldBlocks, 24V DC, 16 Point
Cat. No.
Inputs (Sink)
Powered by
Network
Outputs
(Source)
1732D-IB161212W
16 Sink
0
Max.
Max.
Continuous
Surge/Inrush
Output Current Output Current
Rating per
Rating per
Point/Module
Point
⎯
⎯
Max. Current
for Input
Device Power
per Point
Potential Max.
Aux. Current
per Module
Network
Current Draw
I/O Connectors
0.8 A
0.9 A
75 mA
(8) M12
1732D-16CFG1212W
16 self-configuring‡
0.5/8.0 A
1.2 A
0.8 A
100 mA
(8) M12
0.9/8.0 A
Module operation power and input device power, from Auxiliary Power Connector pins 2 and 3, are separate and isolated from the I/O output power, from
Auxiliary Power Connector pins 1 and 4. Both auxiliary power consumption totals need to be noted.
‡ Each of the self-configuring I/O points can be either an input (sink) or an output (source), for example: 16 points: 13 in –3 out, 6 in – 10 out, etc. or 8 points: 6 in
– 2 out, 1 in – 7 out, etc.
EtherNet/IP WeldBlocks, 24V DC, 16 Point
Cat. No.
Inputs (Sink)
Powered by
Network
1732E-IB16M12W
16 Sink
Quick Selection
1732P-OB8EM8
1732P-OB8EM12
Potential Max.
Aux. Current per
Module
Outputs (Source)
Max. Continuous
Output Current
Rating per
Point/Module
Max.
Surge/Inrush
Output Current
Rating per Point
Max. Current for
Input Device
Power per Point
Potential Max.
Aux. Current per
Module
I/O Connectors
0
⎯
⎯
0.8 A
1.1 A
(8) M12
6-Ethernet
Switches
Safety
Connection
1732E-16CFGM12W
16 self-configuring‡
0.5/8.0 A
1.2 A
0.8 A
(8) M12
1.5/8.0 A
Module operation power and input device power, from Auxiliary Power Connector pins 2 and 3, are separate and isolated from the I/O output power, from
Auxiliary Power Connector pins 1 and 4. Both auxiliary power consumption totals need to be noted.
‡ Each of the self-configuring I/O points can be either an input (sink) or an output (source), for example: 16 points: 13 in –3 out, 6 in – 10 out, etc. or 8 points: 6 in
– 2 out, 1 in – 7 out, etc.
10-Distributed
I/O
1732P-IB8M12
Max. Current for
Input Device
Power per Point
PannelConnect
Cat. No.
1732P-IB8M8
Max. Continuous
Output Current Max. Surge/Inrush
Rating per
Output Current
Point/Module
Rating per Point
General
PROFIBUS DP Digital I/O Blocks
PROFIBUS DP, 24V DC, 8 and 16 Point
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-7
On-Machine Distributed I/O
1732 ArmorBlock I/O
Cables and Connectors
Mating Cables
Mating Cables for ArmorBlock DeviceNet Digital I/O Modules
General
The mating cables shown represent straight PVC models. For additional configurations, materials, and specifications, consult the On-Machine
Connectivity catalog, publication M116-CA001 http://literature.rockwellautomation.com/idc/groups/literature/documents/ca/m116-ca001_-enp.pdf.
I/O Connections⎯DC Micro (M12) or Pico (M8)
ArmorBlock Cat. No.
Quick Selection
1732D-IB8M8
1732D-0B8EM8
1732D-8CFGM8
9-Ethernet
Switches
1732D-IB8M12
1732D-OB8EM12
1732D-8CFGM12
1732D-IB16M12M12
1732D-IB16M12MINI
1732D-OB16M12M12
1732D-OB16M12MINI
1732D-16CFGM12M12
1732D-16CFGM12MN
1732D-8X81212D
1732D-8I8O1212D
1732D-8X81212HD
1732D-IB161212D
End Device per Connector and Recommended Patchcord or VQuantity
Cable (Double-ended)
(1) DC Micro
Recommended Male Cordset
or V-Cable (Single-ended)
Recommended Male Field
Attachable Connector
889P–M3AB—‡
871A–TS3–PM
879D–C3ACD4M–‡
871A–VS4–DM
889P-M3AB—‡
871A–TS4–DM
889D–F4ABP3M–*
(1) Pico 3-Pin
889P–F3ABPM–*
(1) Pico 4-Pin
889P–F4ABPM3–*
(2) DC Micro
879D–F4ACDM–*
(2) Pico 3-Pin
879PZ–F3ABDM4–*
(2) Pico 4-Pin
879PZ–F4ABDM–*
(1) DC Micro
889D–F4ACDM–*
(1) Pico 3-Pin
889P–F3ABDM4–*
(1) Pico 4-Pin
889P–F4ABDM–*
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
DeviceNet Network Connections⎯Mini or Micro (M12)
10-Distributed
I/O
ArmorBlock Cat. No.
Network Connection
Flat Media
Thick Round
Thin Round
1732D-IB16M12MINI
1732D-OB16M12MINI
1732D-16CFGM12MN
Mini
1485K–P§F5–N5
1485R–P§N5–M5
1485R–P§D5–N5
All other 1732D
Micro
1485K–P§F5–R5
1485R–P§M5–R5
1485R–P§R5–D5
§ = length in meters (1, 2, 3, 4, 5, and 6 standard).
Auxiliary Power Connections⎯Mini or Micro (M12)
Flat Media
PannelConnect
Safety
Connection
ArmorBlock Aux. Power
Connector Style
Auxiliary Power Flat Media
Connection
1732D-IB8M12
1732D-0B8EM12
1732D-8CFGM12
1732D-IB8M8
1732D-0B8EM8
1732D-CFGM8
4-Pin DC Micro
1732D-IB16M12M12
1732D-IB16M12MINI
1732D-OB16M12M12
1732D-OB16M12MINI
1732D-16CFGM12M12
1732D-16CFGM12MN
1732D-8X8M12M12D
1732D-8X8M12M12HD
4-Pin Mini
ArmorBlock Cat. No.
1732D-8I8OM12M12D
1732D-IB16M12M12D
Round Media
Thick Round
Thin Round
889D–F2ACDM–K§
Cordset:
889D–F2AC–‡
Patchcord:
889D–F2AEN4M–D§
Cordset:
889D–F4AC–‡
Patchcord:
889D–F4ACDM–*
1485T–PIE4–C§N4
Cordset:
889N–F4AFC–✪F
Patchcord:
889N–F4AFNM–*
Terminal Chamber:
871A–TS4–N1
Not applicable, inputs/outputs powered by network
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
§ = length in meters (1, 2, 3, 4, 5, and 6 standard).
✪ = length in feet (6, 12, and 20 standard).
6-Ethernet
Switches
Visit our website: www.ab.com/catalogs
10-8
Publication M117-CA001A-EN-P
On-Machine Distributed I/O
1732 ArmorBlock I/O
Cables and Connectors
The mating cables shown represent straight PVC models. For additional configurations, materials, and specifications, consult the On-Machine
Connectivity catalog, publication M116-CA001 http://literature.rockwellautomation.com/idc/groups/literature/documents/ca/m116-ca001_-enp.pdf.
I/O Mating Cables⎯DC Micro (M12) or Pico (M8)
All 1732E
1732D-IB16M12M12W
1732D-16CFGM12M12W
1732P-IB8M12
1732P-0B8EM12
1732P-8CFGM12
1732P-IB16M12
1732P-0B16M12
1732P-16CFGM12
1732P-IB8M8
1732P-0B8EM8
1732P-8CFGM8
Recommended Patchcord or
V-Cable (Double-ended)
(2) DC Micro
879D–F4ACDM–*
(2) Pico 3-Pin
879PZ–F3ABDM4–*
(2) Pico 4-Pin
879PZ–F4ABDM–*
(1) DC Micro
889D–F4ACDM–*
(1) Pico 3-Pin
889P–F3ABDM4–*
(1) Pico 4-Pin
889P–F4ABDM–*
(1) DC Micro
889D–F4ABP3M–*
(1) Pico 3-Pin
889P–F3ABPM–*
(1) Pico 4-Pin
889P–F4ABPM3–*
Recommended Male Cordset
or V-Cable (Single-ended)
Recommended Male Field
Attachable Connector
879D–C3ACD4M–‡
871A–VS4–DM
889D–M4AC–‡
871A–TS4–DM
889P–M3AB—‡
871A–TS3–PM
Quick Selection
End Device per Connector and
Quantity
ArmorBlock Cat. No.
General
Mating Cables for ArmorBlock EtherNet/IP, PROFIBUS DP Digital I/O and Armor WeldBlock I/O Modules
9-Ethernet
Switches
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
Network Connector Type
Flat Media
Thick Round
Thin Round
1732D-IB161212W
1732D-16CFG1212W
DeviceNet (Micro)
1485K–P✪F5–R5
1485R–P✪M5–R5
1485R–P✪R5–D5
All 1732E
EtherNet/IP (EtherNet M12)
⎯
⎯
1585D–M4DC–H
All 1732P
PROFIBUS DP Micro (reverse
key M12)
⎯
⎯
⎯
✪ = length in feet (6, 12, and 20 standard).
Auxiliary Power Mating Cables⎯Mini or DC Micro (M12)
Flat Media
ArmorBlock Aux. Power
Connector Style
Auxiliary Power Flat Media
Connection
All 1732E
1732D-IB16M12M12W
1732D-16CFGM12M12W
1732P-IB16M12
1732P-OB16M12
1732P-16CFGM12
4-Pin Mini
1732P-IB8M8
1732P-IB8M12
1732P-0B8EM8
1732P-0B8EM12
1732P-8CFGM8
1732P-8CFGM12
4-Pin DC Micro
ArmorBlock Cat. No.
Round Media
Thick Round
Thin Round
1485T–P1E4–C§–N4
Cordset:
889N–F4AFC–§
Patchcord:
889N–F4AFNM–*
Terminal Chamber:
871A–TS4–N1
889D–F2ACDM–K*
Cordset:
889D–F4AC–‡
Patchcord:
889D–F2AEN4M–D*
Cordset:
889D–F4AC–‡
Patchcord:
889D–F4ACDM–*
6-Ethernet
Switches
Safety
Connection
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
§ = length in meters (1, 2, 3, 4, 5, and 6 standard).
PannelConnect
ArmorBlock Cat. No.
10-Distributed
I/O
Network Mating Cables⎯DeviceNet Micro, EtherNet M12, or PROFIBUS DP Micro
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-9
On-Machine Distributed I/O
1732DS ArmorBlock Guard I/O
Specifications
1732DS-IB8
Cat. No.
1732DS-IB8XOBV4
General
24V DC Input/Output
Module on DeviceNet
Networks
Description
24V DC Input Module
for DeviceNet Networks
Current Consumption
—
I/O Operating voltage
range
19.2V…28.8 V DC (24V DC, -20…+20%)
Digital Inputs
Quick Selection
Number of Inputs
8 safety single-channel or 4 safety dual-channel
Input Type
current sinking
Voltage, On-State Input,
11V DC
Min.
Description
9-Ethernet
Switches
ArmorBlock® Guard I/O™ provides all the advantages of traditional
distributed I/O for safety systems, but has an IP64, IP65, or IP67
package (as marked on the product label) that can be mounted
directly on your machine. On-machine safety I/O reduces wiring
time and startup costs for safety controller applications by
eliminating electrical boxes and simplifying cable installation. The
ArmorBlock family provides industrially hardened I/O blocks that
you can mount directly on equipment near sensors or actuators.
Wiring the I/O to the sensors and actuators is easy using pre-wired
quick disconnect cables.
You can use Guard I/O with any safety controller that communicates
on DeviceNet using CIP Safety for the control and monitoring of
safety circuits. Guard I/O detects circuit failures at each I/O point
while providing detailed diagnostics directly to the controller. With
CIP Safety, you can easily integrate safety and standard control
systems by using safety and standard messages on the same wire.
10-Distributed
I/O
The 1732DS ArmorBlock Guard I/O family consists of 24V DC digital
I/O modules that communicate on DeviceNet networks. The I/O
connectors are sealed M12 micro style while the network and
auxiliary power connectors are sealed mini style. Plus, the
ArmorBlock Guard I/O uses the same input and output M12 pin
configuration as standard ArmorBlock and MaXum.
Features
PannelConnect
Safety
Connection
IP64, IP65, or IP67 rated for direct mounting on machine without
an enclosure
(rating is marked on the product label)
Compact footprint
Quick disconnect dual-channel M12 I/O connectors allow a single
cable connected between ArmorBlock Guard I/O and a dualchannel safety device (See the following table of Allen-Bradley
Guardmaster safety devices)
TÜV certified as a system with GuardLogix, GuardPLC1600/1800,
SmartGuard 600 controllers
Supports both standard and safety control
Supports single and dual-channel devices on inputs and outputs
I/O point-level and other detailed fault diagnostics are available to
the PLC or HMI with self-testing inputs and outputs
EDS (RSNetWorx for DeviceNet) or RSLogix 5000 profile
configuration
Certified by TÜV and UL for Functional Safety up to SIL 3
according to IEC 61508, and PLe/Category 4, according to ISO
13849-1
Additional standard solid-state outputs can be configured as pulse
test sources, outputs for standard PLC control, 24V DC sources,
or muting lamp control and monitoring
Voltage, Off-State Input,
5V DC
Max.
Current, On-State Input,
3.3 mA
Min.
Digital Outputs
Number of Outputs
Output Type
Output Current Rating
4 safety solid-state
⎯
dual channel, current
sourcing/current sinking
pair
—
2.0 A max per point
8 A total module at40 °C
(104 °F)
6 A total module at 60
°C (140 °F)
Short Circuit Protection ⎯
Standard Pulse Test Outputs
Number of Pulse Test
Sources
8
Pulse Test Output
Current
0.7 A per point
Short Circuit Protection
Yes
Yes
General
Operating temperature
-20°…+60°C (-4°C…+140°F)
Relative humidity
10…95% non-condensing
Vibration
0.76 mm @ 10…500 Hz
Operating shock
30 g
Enclosure Protection
IP64, IP65, or IP67 as marked on the product label
Dimensions (HxWxD),
Metric
179 x 70 x 68.7 mm1
Dimensions (HxWxD),
Imperial
7.05 x 2.76 x 2.71 in1
Weight, Metric
600 g
Weight, Imperial
1.2 lb
Certifications
UL, CE, C-Tick, CSA, UL NRGF, ODVA
Conformance, certified by TÜV for Functional
Safety up to SIL 3 and PLe/Cat. 4
1 Includes terminal block.
When product is marked. See the Product Certification link at
http://www.ab.com/certification for Declarations of Conformity, Certificates,
and other certification details.
All specifications are subject to change. Refer to product installations
instructions.
6-Ethernet
Switches
Visit our website: www.ab.com/catalogs
10-10
—
Publication M117-CA001A-EN-P
On-Machine Distributed I/O
1732DS ArmorBlock Guard I/O
Safety Products, Connector Pin Assignments
Cadet
Trojan T15
Trojan T15-GD2
Cat. No. (with
M12)
Catalog Page
Flat
440K-E2NNFPS
3-11
Semi-flexible
440K-E2NNAPS
3-11
Flat
440K-C2NNFPS
3-15
Semi-flexible
440K-C2NNAPS
3-15
Standard
440K-V2NNSPS
3-19
Fully-flexible
440K-V2NNBPS
3-19
GD2 Standard
440K-V2NNGPS
3-19
Standard
440K-T2NBSPS
3-23
Fully-flexible
440K-T2NBBPS
3-23
Trojan T5-GD2
GD2 Standard
440K-T2NBGPS
3-23
MT-GD2, Case Color Red with Snapacting Contacts
None
440K-M2NBNDS
3-29
None
440K-M2NANDS
3-29
None
440K-M2NANYS
3-29
Trojan T5
MT-GD2, Case Color Yellow, Snapacting Contacts
Solid - 50xØ10 mm
440H-S2NNPPS
3-91
Pre-bored - 30xØ16 mm
440H-S2NNHPS
3-91
Solid - 50xØ10 mm
440H-E2NNPPS
3-95
Pre-bored - 30xØ16 mm
440H-E2NNHPS
3-95
Lifeline3
N/A
440E-D2NNNYS
4-6
Lifeline4
N/A
440E-L2NNNYS
4-11
Sprite
Ensign
Emergency Stop
N/A
800F-1YMQ53V
4-43
Safety Mats
N/A
440F-MxxxHxNN
2-94
Quick Selection
Elf
Actuator Type
9-Ethernet
Switches
Product Family
General
Safety Products that Connect Directly to ArmorBlock Guard I/O with a Single 5-Pin Micro (M12) Patchcord1
1732DS ArmorBlock Guard I/O Micro Connector Pin Assignments
Input Configuration
Output Configuration
Signal
1
Test Output n+1
2
Safe Input n+1
3
Input Common
4
Safe Input n
5
Female
2
5
1
Test Output n
3
4
Pin
Signal
1
Output +24V DC Power
2
Output n+1 (Sinking)
3
Output Power Common
4
Output n (Sourcing)
5
Output Power Common
PannelConnect
Pin
1732DS ArmorBlock Guard I/O Mini Connector Pin Assignments
ArmorBlock Guard I/O DeviceNet Configuration
Signal
1
Drain
Male
2
V+ (Red)
3
V- (Black)
4
CAN_H (White)
5
CAN_L (Blue)
Female
Safety
Connection
Pin
ArmorBlock Guard I/O Power Configuration
Signal
1
Output +24V DC Power (Red)
2
Input +24V DC Power (Green)
3
Input Power Common (White)
4
Output Power Common (Black)
Male
6-Ethernet
Switches
Pin
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-Distributed
I/O
1 Only the 2 N.C. safety contacts of the safety switches are connected to the 5-pin micro (M12) connector.
10-11
On-Machine Distributed I/O
1732DS ArmorBlock Guard I/O
Cables and Connectors
ArmorBlock Guard I/O Recommended Compatible Cables and Connectors1
Description
Cat. No.
General
Quick Selection
9-Ethernet
Switches
10-Distributed
I/O
DC Micro (M12) Male Cordset
889D-M5AC-
Five-pin M12 patchcord, 1 m (39.37 in.)
889D-F5ACDM-‡
DC Micro V-Cable for Single-Channel Sensors
879D-F4ACD5M-§
M12 Single-Channel Splitter
879D-F4D5M
M12 Terminal Chamber—Straight Male
871A-TS5-DM
M12 Terminal Chamber—Right Angle Male
871A-TR5-DM
PannelConnect
1 All cables must use 5-pin connections for ArmorBlock Guard I/O M12 input compatibility.
Replace symbol with 0M3 (0.3 m), 2 (2 m), or 5 (5 m) for standard cable length.
‡ Replace symbol with 1 (1 m), 2 (2 m), 5 (5 m), or 10 (10 m) for standard cable length.
§ Replace symbol with 0M3 (0.3 m), 1 (1 m), 2 (2 m), or 5 (5 m) for standard cable length.
Safety
Connection
Single Channel Wiring (879D-F4ACD5M and 1485P-PID5-RR4)
Gray
5
Black
Black
4
4
Blue
Blue
3
3
White
White
2
Connector A
2
Brown
Brown
1
1
4
6-Ethernet
Switches
Connector B
3
2
1
Black
Blue
White
Brown
Visit our website: www.ab.com/catalogs
10-12
Publication M117-CA001A-EN-P
On-Machine Distributed I/O
1732 ArmorBlock I/O
Environmentals and Certifications
ArmorPoint I/O Modules Environmental Specifications
ArmorPoint I/O Family
ArmorPoint™ I/O
On-Machine
-20…60 °C (-4…140 °F)
Nonoperating temperature
-40…85 °C (-40…185 °F)
Relative humidity
5...95% noncondensing
Operating shock
30 g
1738-OW4M12, 1738-OW4M12AC
9-Ethernet
Switches
Sealed housing rated for IP69K and NEMA 4X eliminates
enclosure costs.
A variety of I/O types for broad application coverage.
Easy module replacement with unique latching mechanisms
eliminates need for screws.
Connection with industry-standard M8, M12, and M23 quickdisconnects reduces costs of additional accessories.
Provides tight IP67 motor starter integration with ArmorStart™.
Extremely fast I/O backplane uses change-of-state (COS)
connections to maximize performance (polling available in
configuration mode).
Auto Device Replacement (ADR) allows OEMs to add machine
features and I/O modules without making changes to the
machine’s control software.
Removal and Insertion Under Power (RIUP) makes it possible to
replace a module without disrupting network operation.
Efficient network solutions with multiple DeviceNet™ interfaces,
ControlNet™, EtherNet/IP™, and PROFIBUS DP communication
adapters.
Mounting Type
Operating temperature
15 g
Nonoperating shock
50 g
Vibration
5 g at 10…500 Hz
1738-OW4M12, 1738-OW4M12AC
2 g at 10…500 Hz
1 Except AC I/O modules, which are IP67.
When product is marked. See the Product Certification link at www.ab.com
for Declarations of Conformity, Certificates, and other certification details.
AmorPoint I/O Approximate Dimensions
Module Type
Dimensions (HxWxD), Approx.
I/O Modules
120 x 72 x 42 mm1 (4.72 x 2.83 x
1.65 in.1)
Communication Adapter Modules
(except for 1738-AENTR)
112 x 72 x 65 mm (4.41 x 2.83 x 2.56
in.)
2-Port EtherNet/IP Communication
Adapter Module - 1738-AENTR
112 x 123 x 67 mm (4.41 x 4.84 x
2.64 in.)
10-Distributed
I/O
Features
Enclosure Type Rating
1 Includes I/O module and mounting base.
POINT I/O Modules Certifications
Product Design
Certifications: CE, C-Tick.
The architecture of ArmorPoint is based on the POINT I/O system
and reuses the circuitry of the adapter and I/O designs. The system
is IP67-compliant and meets other certifications necessary to
provide a complete On-Machine solution. ArmorPoint I/O modules
offer one to eight points per module. Choose from many different
I/O types with connector choices of M8, M12, or M23 quickdisconnect terminations.
When product is marked. See the Product Certification link at
www.ab.com for Declarations of Conformity, Certificates, and other
certification details.
Safety
Connection
The I/O modules are interfaced to a network through a
communication adapter, which includes a built-in power supply that
converts incoming 24V DC power to 5V DC backplane power.
Communication adapters are available for DeviceNet, ControlNet,
EtherNet/IP, and PROFIBUS DP. The I/O modules receive power
from the power supply through the backplane. ArmorPoint I/O offers
flexibility, supporting up to 63 I/O modules per network node. A bus
extension module allows for separation of modules on the same
node.
6-Ethernet
Switches
The family includes hardened power supplies to allow for isolation,
for example AC from DC, analog from digital, inputs from outputs.
Module replacement is easy since modules are held on the base by
unique latching mechanisms⎯no screws needed. ArmorPoint
connects directly to ArmorStart™ on the same network node.
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
PannelConnect
ArmorPoint is a 24V DC modular On-Machine™ I/O that extends the
features and benefits of the POINT I/O™ IP20 system into an
IP69K-compliant system. ArmorPoint I/O offers flexibility, ease of
application, and just-what-you-need granularity in two to eight
points to reduce system cost and size.
Meets IP65/66/67/69K (when marked)
and NEMA 4X1
Quick Selection
ArmorPoint I/O has three major components:
I/O modules provide the field interface, system-interface circuitry,
and bases for mounting
Communication interface modules provide the network-interface
circuitry
Power distribution modules provide the solution to expandability
of the ArmorPoint I/O system and the flexibility to mix a variety of
signal types
General
Modular Design
10-13
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Communication Adapters
Communication Adapter Modules
An ArmorPoint I/O communication interface module provides the interface between a network and the ArmorPoint I/O backplane. A
terminating base, used with the last I/O module, ships with the adapter. An I/O adapter supports up to a maximum of 63 I/O modules.
General
Adapter modules are available for ControlNet, DeviceNet (with and without subnet connectivity), EtherNet/IP, or PROFIBUS DP networks. The
DeviceNet adapters are available in four styles, based on connectivity: DC micro (M12) terminations, mini passthrough terminations, mini drop
termination, and adapter with subnet connectivity.
ArmorPoint I/O Communication Adapters
Cat. No.
Description
Termination Type
Quick Selection
Supports Expansion Power
Supplies
Number of I/O Points, Max.1
Yes
252
Yes
252
Yes
252
DeviceNet
1738-ADN12
1738-ADN18
1738-ADN18P
DeviceNet I/O Adapter
• A total of 63 ArmorPoint I/O
modules can be assembled on a
single DeviceNet node
M12 Quick-Disconnect
Mini Connector - Drop
Mini Connector - Pass-through
1738-ACNR
ControlNet I/O Adapter
• A total of 63 ArmorPoint I/O
modules can be assembled on a
single ControlNet node
• Up to 25 direct connections and
5 rack connections are allowed
1738-AENT
EtherNet/IP Twisted Pair Media
I/O Adapter
• A total of 63 ArmorPoint I/O
modules can be assembled on a
single EtherNet/IP node
• Refer to the User Manual to
determine the ratings for direct and
rack connections allowed
M12 Quick-Disconnect
Yes
252
2-Port EtherNet/IP Adapter
• Inlcudes 2 EtherNet/IP ports,
configured as embedded switch
• Supports star, tree, linear, and
ring topologies
1738-AENTR
• A total of 63 ArmorPoint I/O
modules can be assembled on a
single EtherNet/IP node
• Refer to the User Manual to
determine the ratings for direct and
rack connections allowed
M12 Quick-Disconnect
Yes
252
Yes
252
9-Ethernet
Switches
1738-ADNX
DeviceNet I/O Adapter with
Expansion Port
• A total of 63 ArmorPoint I/O
modules can be assembled on a
single DeviceNet node
• Expansion network port allows
for a DeviceNet subnet
• Increases the reach of DeviceNet
from 500 to 1500 meters
• Increases nodes per DeviceNet
scanner from 63 to more than 126
(dependent on DeviceNet scanner
capacity)
M12 Quick-Disconnect
ControlNet
TNC Connector
10-Distributed
I/O
EtherNet/IP
PannelConnect
PROFIBUS DP
Safety
Connection
1738-APB
PROFIBUS DP I/O Adapter
• A total of 63 ArmorPoint I/O
modules can be assembled on a
single PROFIBUS DP node
M12 Quick-Disconnect
1 Using the eight-point digital I/O modules.
6-Ethernet
Switches
Visit our website: www.ab.com/catalogs
10-14
Publication M117-CA001A-EN-P
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Communication Adapters, Mating Cables
Field Side Power
Requirements
1738-ADN12
400 mA at 24V DC (+20% =
28.8V DC)
1738-ADN18
400 mA at 24V DC (+20% =
28.8V DC)
1738-ADN18P
400 mA at 24V DC (+20% =
28.8V DC)
1738-ADNX
10…28.8V DC
Power Consumption (W) at
24V
Inrush Current
Power Dissipation, Max.
8.0 W
400 mA at 24V DC (+20% =
28.8V DC)
6 A for 10 ms
2.8 W at 28.8V
1738-ACNR
425 mA @ 24V DC (+20% =
28.8V DC)
1738-AENT
30 mA @ 24V DC (+4% =
25V DC)
4.5 W
1738-AENTR
24V DC (+20% = 28.8 V DC
max) at 400 mA max
4.5 W
1738-APB
400 mA @ 24V DC (+20% =
28.8V DC)
8.0 W
Mating Cables
ArmorPoint Network Adapter Mating Cables
Network
Flat Media
Thick Round
Thin Round
DeviceNet
1485K-P§F5-R5
1485R-P§M5-R5
1485R-P§R5-D5
1738-ADN18P
1738-ADN18
DeviceNet
1485K-P§F5-N5
1485R-P§N5-M5
1485R-P§D5-N5
1738-ACNR
ControlNet
⎯
⎯
1786-TPST2T
1786-TPRT2T
EtherNet/IP
⎯
⎯
1585D-M4DC-H
PROFIBUS DP
⎯
⎯
⎯
1738-AENT
1738-AENTR
1738-APB
10-Distributed
I/O
Cat. No.
1738-ADN12
1738-ADNX
Quick Selection
Input Voltage Range
9-Ethernet
Switches
Cat. No.
General
Specifications
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
§ = length in meters (1, 2, 3, 4, 5, and 6 standard).
✪ = length in feet (6, 12, and 20 standard).
Flat Media
Cat. No.
1738-ADN12
1738-ADNX
1738-ADN18P
1738-ADN18
1738-ACNR
1738-AENT
1738-APB
PannelConnect
ArmorPoint Auxiliary Power Mating Cables
Round Media
Auxiliary Power Flat Media Connection
Cordset (Single-ended)
Patchcord (Double-ended)
1485T-P1E4-C§-N4
889N-F4AFC-✪F
889N-F4AFNM-Θ
6-Ethernet
Switches
Safety
Connection
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
§ = length in meters (1, 2, 3, 4, 5, and 6 standard).
✪ = length in feet (6, 12, and 20 standard).
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-15
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Digital DC Input Modules
Digital DC I/O Modules
General
The 1738 digital I/O modules support:
A wide variety of voltage interface capabilities.
Isolated and non-isolated module types.
Point-level output fault states for short-circuit and wire-off diagnostics.
Choice of direct-connect or rack-optimized communications.
Field-side diagnostics on select modules.
ArmorPoint Digital DC Input Modules
Quick Selection
General-purpose 24V DC inputs including 2- and 3-wire proximity sensors.
Cat. No.
Inputs
1738-IB2M12
2 Sink
1738-IB4M12
4 Sink
9-Ethernet
Switches
1738-IB4DM12
4 Sink,
Diagnostic
1738-IB4M8
4 Sink
1738-IB8M12
1738-IB8M23
On-State
Voltage,
Nom.
Input Delay Current, On- Current, On- Current, OffPower
Time, On to State Input, State Input, State Input,
PointBus
Dissipation,
Off
Min.
Max.
Max.
Current (mA)
Max.
Voltage
Range
10V
DC…28.8V
DC
0.5 ms
hardware +
(0…65 ms
selectable)
5 mA
75 mA
11V
DC…28.8V
DC
0…65535 μs
selectable in
1 μs
intervals
(rounded to
nearest 333
μs) Default is
1000 μs
15 mA
50 mA
24V DC
2 mA
1.5 mA
8 Sink
10-Distributed
I/O
1738-IB8M8
1738-IB16DM12
16 Sink,
Diagnostic
10V
DC…28.8V
DC
0.5 ms
hardware +
(0…65 ms
selectable)
5 mA
1738-IV8M12
1738-IV8M23
8 Source
1738-IV8M8
PannelConnect
1738-IV4M12
4 Source
Quantity 4.
Safety
Connection
6-Ethernet
Switches
Visit our website: www.ab.com/catalogs
10-16
Publication M117-CA001A-EN-P
75 mA
0.7 W at
28.8V DC
1.0 W at
28.8V DC
Termination
Type
DC micro
(M12)
0.6 W max
at 28.8V DC
DC micro
(M12)
1.0 W at
28.8V DC
Pico 3-pin
(M8)
1.6 W at
28.8V DC
DC micro
(M12)
1.6 W at
28.8V DC
M23
1.6 W at
28.8V DC
Pico 3-pin
(M8)
2.7 W at
28.8V DC
DC micro
(M12)
1.6 W at
28.8V DC
DC micro
(M12)
1.6 W at
28.8V DC
M23
1.6 W at
28.8V DC
Pico 3-pin
(M8)
1.0 W at
28.8V DC
DC micro
(M12)
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Digital DC Output Modules, Contact Output Modules
ArmorPoint Digital DC Output Modules
2 Source
75 mA
4 Source
1738-OB8EM12
1738-OB8EM23
10V DC…28.8V
DC
24V DC
8 Source
Power
Dissipation, Max.
0.8 W at 28.8V DC
4.0 A per module,
2.0 A per channel
1738-OB2EPM12
1738-OB4EM8
PointBus Current
(mA)
2.0 A per module,
1.0 A per channel
1738-OB2EM12
1738-OB4EM12
Output Current
Rating, Max.
Termination Type
DC micro (M12)
1.2 W at 28.8V DC
3.0 A per module,
1.0 A per channel
Pico 3-pin (M8)
DC micro (M12)
2.0 W at 28.8V DC
M23
1738-OB8EM8
Pico 3-pin (M8)
1738-OB16EM12
1738-OB16E25DS
DC micro (M12)
16 Source
4.0 A per module
0.5 A per channel
4 Sink
4.0 A per module,
1.0 A per channel
150 mA
D-shell1
3.0 W at 28.8V DC
1738-OB16E19M23
1738-OV4EM12
M23
75 mA
2.9 W at 28.8V DC
DC micro (M12)
Quantity 4.
1 Use the 1738-CBLM25DS 25-pin D-sub connector interface cable to connect the 1738-OB16E25DS module, or another I/O module that has a similar D-sub
connector, to a pneumatic valve interface.
ArmorPoint Digital DC Configurable Modules
Modules offer eight configurable 24V DC I/O points, with sealed M8 (pico) or M23 style I/O connectors. A mounting base ships with each
module. The 1738-8CFGDLXM8 and 1738-8CFGDLXM23 modules include DeviceLogix functionality.
Cat. No.
Inputs/Outputs
1738-8CFGM8
8 configurable sinking
inputs or sourcing
outputs
1738-8CFGM23
On-State Voltage
8 configurable sinking
1738-8CFGDLXM8
inputs or sourcing
outputs, with
1738-8CFGDLXM23
DeviceLogix
PointBus Current
(mA)
On-State Current
Power Dissipation,
Max.
Quick Selection
Voltage Range
9-Ethernet
Switches
On-State Voltage,
Nom.
Outputs
Termination Type
Pico 3-pin (M8)
11V min
30V max
M23
2 mA min
15 mA max
75 mA
1.0 W @ 28.8V DC
Pico 3-pin (M8)
M23
10-Distributed
I/O
Cat. No.
General
24V DC electronically protected output modules. The 1738-OB2EPM12 module has 24V DC electronically protected, fast-switching highcurrent outputs.
ArmorPoint Digital Contact Output Modules
Cat. No.
Outputs
Output Delay
On-State
Time, On to
Voltage, Nom. Off, Max.1
Contact
Resistance,
Initial
Leakage
Relay Output Current, OffCurrent
State Output,
Rating, Max.
Max
1738-OW4M12
4 Form A
(N.O.) relays,
isolated
1738-OW4M12AC
24V DC
26 ms
30 mΩ
⎯
1.2 mA and
bleed resistor
thru snubber
circuit @ 240V
AC
PointBus
Current (mA)
Power
Dissipation,
Max.
Termination
Type
DC micro
(M12)
80 mA
0.5 W
AC micro 4pin§
PannelConnect
Individually isolated contact output modules.
1 Time from valid output off signal to relay deenergization by module.
6-Ethernet
Switches
Safety
Connection
§ Quantity 2.
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-17
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Digital DC I/O Module Mating Cables
Mating Cables
ArmorPoint Digital DC Input Module Mating Cables
General
ArmorPoint Cat.
No.
1738-IB8M12
1738-IV8M12
1738-IB16DM12
Quick Selection
1738-IB2M12
1738-IB4M12
1738-IB4DM12
1738-IV4M12
1738-IB4M8
1738-IB8M8
1738-IV8M8
1738-8CFGM8
1738-8CFGDLXM8
9-Ethernet
Switches
1738-IB8M23
1738-IV8M23
1738-8CFGM23
1738-8CFGDLXM23
End Device per Connector
Recommended Patchcord
(Double-ended)
(2) DC Micro
879D-F4ACDM—*
(2) Pico 3-Pin
879PZ-F3ABDM4⎯*
(2) Pico 4-Pin
879PZ-F4ABDM⎯*
(1) DC Micro
889D-F4ACDM⎯*
(1) Pico 3-Pin
889P-F3ABDM4⎯*
(1) Pico 4-Pin
889P-F4ABDM⎯*
(1) DC Micro
889D-F4ACDM⎯*
(1) Pico 3-Pin
889P-F3ABDM4⎯*
(1) Pico 4-Pin
889P-F4ABDM⎯*
(1) DC Micro
889D-F4ABP3M⎯*
(1) Pico 3-Pin
889P-F3ABPM⎯*
(1) Pico 4-Pin
889P-F4ABPM3⎯*
(1) M23 12-Pin
889M-F11RMMU⎯*
Recommended Male Cordset
(Single-ended)
Recommended Field Attachable
Connector
879D-C3ACD4M—‡
871A-VS4-DM
889D-M4AC—‡
871A-TS4-DM
889D-M4AC—‡
871A-TS4-DM
889P-M3AB—‡
871A-TS3-PM
889M-U11RM—‡
889M-M12AH-T
Recommended Male Cordset
(Single-ended)
Recommended Field Attachable
Connector
879D-C3ACD4M—‡
871A-VS4-DM
889D-M4AC—‡
871A-TS4-DM
889D-M4AC—‡
871A-TS4-DM
889P-M3AB—‡
871A-TS3-PM
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
ArmorPoint Digital DC Output Module Mating Cables
10-Distributed
I/O
ArmorPoint Cat.
No.
1738-OB8EM12
1738-OB16EM12
End Device per Connector
Recommended Patchcord
(Double-ended)
(2) DC Micro
879D-F4ACDM⎯Θ
(2) Pico 3-Pin
879PZ-F3ABDM4⎯Θ
(2) Pico 4-Pin
879PZ-F4ABDM⎯Θ
(1) DC Micro
889D-F4ACDM⎯Θ
(1) Pico 3-Pin
889P-F3ABDM4⎯Θ
(1) Pico 4-Pin
889P-F4ABDM⎯Θ
PannelConnect
Safety
Connection
1738-OB2EM12
1738-OB2EP12
1738-OB4EM12
1738-OV4EM12
(1) DC Micro
889D-F4ACDM⎯Θ
(1) Pico 3-Pin
889P-F3ABDM4⎯Θ
(1) Pico 4-Pin
889P-F4ABDM⎯Θ
(1) DC Micro
889D-F4ABP3M⎯Θ
1738-OB4EM8
1738-OB8EM8
(1) Pico 3-Pin
889P-F3ABPM⎯Θ
(1) Pico 4-Pin
889P-F4ABPM3⎯Θ
1738-OB8EM23
(1) M23 12-Pin
889M-F11RMMU⎯Θ
889M-U11RM—‡
889M-M12AH-T
1738-OB16E19M23
(1) M23 19-Pin
889M-F19RM⎯Θ
889M-U19RM—‡
889M-M19AH-T
Recommended Male Cordset
(Single-ended)
Recommended Field Attachable
Connector
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
ArmorPoint Digital Contact Output Module Mating Cables
ArmorPoint Cat.
No.
End Device per Connector
Recommended Patchcord
(Double-ended)
1738-OW4M12
(1) DC Micro
889D-F4ACDM⎯Θ
889D-M4AC—‡
871A-TS4-DM
1738-OW4M12AC
(1) AC Micro 4-Pin
889R-F4AERM⎯Θ
889R-M4AEA—‡
⎯
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
6-Ethernet
Switches
Visit our website: www.ab.com/catalogs
10-18
Publication M117-CA001A-EN-P
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Contact Output Module Mating Cables, Digital AC I/O Modules
ArmorPoint Cat.
No.
End Device per Connector
Recommended Patchcord
(Double-ended)
Recommended Male Cordset
(Single-ended)
Recommended Field Attachable
Connector
1738-OW4M12
(1) DC Micro
1738-OW4M12AC
(1) AC Micro 4-Pin
889D-F4ACDM⎯Θ
889D-M4AC—‡
871A-TS4-DM
889R-F4AERM⎯Θ
889R-M4AEA—‡
⎯
Quick Selection
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
General
ArmorPoint Digital Contact Output Module Mating Cables
Digital AC I/O Modules
The 1738 digital I/O modules support:
A wide variety of voltage interface capabilities.
Isolated and non-isolated module types.
Point-level output fault states for short-circuit and wire-off diagnostics.
Choice of direct-connect or rack-optimized communications.
Field-side diagnostics on select modules.
Cat. No.
Inputs
On-State
Voltage,
Nom.
2
120V AC
1738-IA2M12AC3
1738-IA2M12AC4
Input Delay Current, On- Current, OffInput
Power
Time, On to State Input, State Input, Impedance,
PointBus
Dissipation,
Off
Min.
Max.
Nom.
Current (mA)
Max.
Voltage
Range
65V
AC…132V
AC
20.0 ms
hardware +
(0…65 ms
selectable)
3.7 mA
2.5 mA
10.6 kΩ
75mA
0.7 W at
132V AC
Termination
Type
AC micro 3pin
AC micro 4pin
Quantity 2.
ArmorPoint Digital AC Output Modules
General purpose AC outputs.
Outputs
1738-OA2M12AC3
2
120V/220V AC
Voltage Range
74V AC…264V AC
Output Current
Rating
1.5 A (2 channels
@ 0.75 A each)
PointBus Current
(mA)
Power
Dissipation, Max.
Termination Type
75 mA
0.8 W at 28.8V DC
AC 3-pin
PannelConnect
Cat. No.
On-State Voltage,
Nom.Voltage, OnState Output,
Nom.
10-Distributed
I/O
General-purpose AC inputs including 2- and 3-wire proximity sensors.
9-Ethernet
Switches
ArmorPoint Digital AC Input Modules
6-Ethernet
Switches
Safety
Connection
Quantity 2.
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-19
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Digital AC I/O Module Mating Cables, Analog Input Modules
Mating Cables
ArmorPoint Digital AC Input Module Mating Cables
General
ArmorPoint Cat.
No.
End Device per Connector
Recommended Patchcord
(Double-ended)
Recommended Male Cordset
(Single-ended)
Recommended Field Attachable
Connector
1738-IA2M12AC3
(1) AC Micro 3-Pin
889R-F3AERM⎯Θ
889R-M3AEA—‡
871A-TS3-RM
1738-IA2M12AC4
(1) AC Micro 4-Pin
889R-F4AERM⎯Θ
889R-M4AEA—‡
⎯
Recommended Male Cordset
(Single-ended)
889R-M3AEA—‡
Recommended Field Attachable
Connector
871A-TS3-RM
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
Quick Selection
ArmorPoint Digital AC Output Module Mating Cables
ArmorPoint Cat.
No.
1738-OA2M12AC3
End Device per Connector
(1) AC Micro 3-Pin
Recommended Patchcord
(Double-ended)
889R-F3AERM⎯Θ
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
9-Ethernet
Switches
10-Distributed
I/O
PannelConnect
Safety
Connection
6-Ethernet
Switches
Visit our website: www.ab.com/catalogs
10-20
Publication M117-CA001A-EN-P
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Temperature and RTD Modules, Analog Output Modules
1738-IT2IM12
2 single-ended Isolated Thermocouple, Millivolt
Thermocouple
Resolution
⎯
Type B, 30…1820° C, 3 counts/ °C
Type C, 0…2315° C, 6 counts/ °C
Type E, -270…1000° C, 24 counts/ °C
Type J, -210…1200° C, 21 counts/ °C
Type K, -270…1372° C, 13 counts/ °C
Type N, -270…1300° C, 11 counts/ °C
Type R, -50…1768.1° C, 4 counts/ °C
Type S, -50...1768.1° C, 4 counts/ °C
Type T, -270…400° C, 15 counts/ °C
Cold Junction
Compensation Range
⎯
0…70 °C
Input Update Rate,
per Module
20 ms @ Notch = 50 Hz
17 ms @ Notch = 60 Hz (default)
10 ms @ Notch = 100 Hz
8 ms @ Notch = 120 Hz
5 ms @ Notch = 200 Hz
4 ms @ Notch = 240 Hz
3 ms @ Notch = 300 Hz
3 ms @ Notch = 400 Hz
2 ms @ Notch = 480 Hz
20 ms @ Notch = 50 Hz
17 ms @ Notch = 60 Hz (default)
10 ms @ Notch = 100 Hz
8 ms @ Notch = 120 Hz
5 ms @ Notch = 200 Hz
4 ms @ Notch = 240 Hz
3 ms @ Notch = 300 Hz
3 ms @ Notch = 400 Hz
2 ms @ Notch = 480 Hz
Data Format
Signed integer
Signed integer
Outputs
1738-OE2CM12
2 singleended
4…20 mA
0…20 mA
1738-OE4CM12
4 singleended
0 mA output
until
communicati
on
established
0…21 mA
user
configurable
16 bits
0.32 μA/cnt
1738-OE2VM12
2 singleended
0…10V
±10V
14 bits (13 +
sign)
1.28 mV/cnt
in unipolar or
bipolar mode
Output
Resolution
Absolute
Accuracy
13 bits over 21 mA
2.5 μA/cnt
Step
External DC
Response to
Output
Supply
63% of FS Conversion
PointBus
Current,
Rate
Current (mA)
Nom.
24 μs
0.1% Full
Scale at 25°
C1 0.1%
Full Scale at
25 °C
40 μs
20 μs
16 μs
1 μs
20 μs
75 mA
Power
Dissipation,
Max.
50 mA at
24V DC
(including
outputs at
20 mA)
1.0 W at
28.8V DC
115 mA at
24V DC
(including
outputs at
20 mA)
750 Ω load
on each
output: 1.86
W at 28.8V
DC
0 Ω load on
each output:
2.15 W at
28.8V DC
35 mA at
24V DC
(including
outputs at 3
mA)
1.0 W at
28.8V DC
Termination
Type
DC Micro
(M12)
1 Includes offset, gain, non-linearity, and repeatability error terms.
6-Ethernet
Switches
Safety
Connection
Analog output modules support these configurable parameters and diagnostics: open-wire with LED and electronic reporting (OE2C only); fault mode; idle
mode; alarms; channel signal range and on-board scaling.
10-Distributed
I/O
Cat. No.
Output
Signal
Range
PannelConnect
ArmorPoint Analog Output Modules
9-Ethernet
Switches
Quick Selection
1738-IR2M12
2 single-ended RTD
Number of Inputs
General
Temperature and RTD Input Modules⎯Additional Specifications
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-21
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Analog I/O Module Mating Cables
Mating Cables
General
The mating cables listed represent straight PVC models. You can also use our Product Configuration Assistant
http://raise.rockwellautomation.com/RAConfig/configure.asp?tid=1738AIO for ArmorPoint analog I/O modules to find additional mating
cables, network connections, and auxiliary power connections for the I/O module you need.
ArmorPoint Analog Input Module Mating Cables
ArmorPoint
Cat. No.
Quick Selection
End Device per Connector
Recommended Patchcord
(Double-ended)
Recommended Male Cordset
(Single-ended)
Recommended Field Attachable
Connector
1738-IE2CM12
1738-IE4CM12
1738-IE2VM12
1738-IR2M12
(1) DC Micro
889D-F4SCDM⎯Θ
889D-M4SC—‡
889D-M4DC-SH
1738-IT2IM12
(1) DC Micro
⎯
—
871A-TS4CJC-DM
ArmorPoint Analog Output Module Mating Cables
9-Ethernet
Switches
ArmorPoint Cat.
No.
1738-OE2CM12
1738-OE4CM12
1738-OE2VM12
End Device per Connector
Recommended Patchcord
(Double-ended)
Recommended Male Cordset
(Single-ended)
Recommended Field Attachable
Connector
(1) DC Micro
889D-F4SCDM⎯Θ
889D-M4SC—‡
889D-M4DC-SH
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
10-Distributed
I/O
PannelConnect
Safety
Connection
6-Ethernet
Switches
Visit our website: www.ab.com/catalogs
10-22
Publication M117-CA001A-EN-P
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Specialty and Serial I/O Modules
The input voltage range is 5V DC (1738–IJ) or 15…24V DC (1738–VHSC24). The module returns the count or frequency in the form of a 24-bit
binary number (0…16,777,215) expressed in a 32-bit word. Each counter has a user-selectable preset and rollover value associated with it.
The operation of the counter and encoder modes is nearly identical. The difference between the two modes is in the type of feedback (onephase versus two-phase) for the count direction (up or down). In encoder mode, a transition is expected on B for counting to proceed in a
direction, whereas, in counter mode, the B input may be left at a static level. All operating modes are selected by writing appropriate
configuration data to the module.
Cat. No.
Number of
Counters
1738-IJM23
1
1738-VHSC24M23
1
Voltage, OnState Input, Field Power
Nom.
Bus
Number of
Compare
Windows
Output
Groups
⎯
⎯
5V DC
24V DC
Voltage
dependent
on field
power
source1
4
Input
Frequency,
Max.
Output
Current, OnDelay Time, State Input,
Off to On
Min.
1.0 MHz
counter and
encoder X1
configuratio
ns (no filter)
500 kHz
encoder X2
1 group of 2 configuratio
n (no filter)
250 kHz
encoder X4
configuratio
n (no filter)
PointBus
Current
(mA)
Termination
Type
160
M23
110
M23
—
25 μs (load
dependent)
≥5 mA
1 Field power source via the field power connection on the network adapter, 1738–EP24DC, or 1738–FPD.
Quick Selection
ArmorPoint Counter Modules
9-Ethernet
Switches
Counter Modules
SSI Modules
Serial Interface Modules (RS–232, RS–485, RS–422)
General
Specialty I/O Modules
ArmorPoint Serial I/O Modules
ArmorPoint Synchronous Serial Interface Modules
The Synchronous Serial Interface Absolute Encoder Module collects serial data from industrial absolute position encoding sensors that use
standard SSI protocol, including linear, rotary, and optical distance measuring devices. The module is inserted into an ArmorPoint I/O terminal
base that provides common power, communications, and wiring connections for the SSI sensors. The module converts a serial data stream
from an SSI sensor into absolute position data readable as a 32-hexadecimal value. Gray or binary-code capable with gray to binary
conversion, increasing or decreasing SSI count indication, 2 SSI word comparator values, and SSI word latching with I1 input.
10-Distributed
I/O
OFF to ON delay is time from a valid output “on” signal to output energization.
ArmorPoint Serial I/O Modules
Cat. No.
Inputs/Outputs
PointBus Current
(mA)
External DC Power
Supply
Power Dissipation,
Max.
Termination Type
1738-SSIM23
1 Synchronous Serial Interface channel
110 mA
10…28V DC
0.75 A max.
0.94 W
M23
1738-232ASCM12
1 Serial Interface channel, RS232
75 mA
10…28.8V DC
1.0 A max.
1.75 W at 28.8V DC
1738-485ASCM12
1 Serial Interface channel, RS485, RS422
75 mA
10…28.8V DC
1.0 A max.
1.75 W at 28.8V DC
6-Ethernet
Switches
DC Micro (M12)
Safety
Connection
The 1738–232ASCM12 and 1738–485ASCM12 serial-interface modules offer a serial-link communication interface solution for peripheral
products with RS–232 (use the 1738–232ASCM12), RS–485, and RS–422 ports (use the 1738–485ASCM12). These modules allow a device
with serial-interface output (i.e., bar code readers) to communicate up to 128 bytes of ASCII data onto any network supported by ArmorPoint
I/O. Each module is a single-channel, full-duplex interface and is rated for up to 38.4k baud. LED indicators on the modules offer diagnostics
for the module, POINTBus backplane, and transmit/receive status indication.
PannelConnect
ArmorPoint Serial Interface Modules
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-23
On-Machine Distributed I/O
1732 ArmorPOINT I/O
Counter and Serial I/O Module Mating Cables, Power Supplies
Mating Cables
General
The mating cables shown represent straight PVC models. You can also use our Product Configuration Assistant
http://raise.rockwellautomation.com/RAConfig/configure.asp?tid=1738SIO for ArmorPoint specialty I/O modules to find additional mating
cables, network connections, and auxiliary power connections for the I/O module you need.
ArmorPoint Counter Modules Mating Cables
ArmorPoint Cat.
No.
1738-IJM23
1738-VHSC24M23
End Device per Connector
Recommended Patchcord
(Double-ended)
Recommended Male Cordset
(Single-ended)
Recommended Field Attachable
Connector
(1) M23 12-pin
889D-F4SCDM⎯Θ
889D–M4SC⎯‡
889D-M4DC-SH
Quick Selection
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
ArmorPoint Serial I/O Mating Cables
ArmorPoint Cat.
No.
End Device per Connector
Recommended Patchcord
(Double-ended)
Recommended Male Cordset
(Single-ended)
Recommended Field Attachable
Connector
1738–SSIM23
(1) M23 12-Pin
⎯
⎯
889M–M12AH–T
1738–232ASCM12
1738–485ASCM12
(1) DC Micro
889D–F4SCDM⎯Θ
889D–M4SC⎯‡
889D–M4DC–SH
Θ = length in meters (1, 2, 3, 5, and 10 standard).
‡ = length in meters (2, 5, and 10 standard).
9-Ethernet
Switches
10-Distributed
I/O
PannelConnect
Safety
Connection
6-Ethernet
Switches
Visit our website: www.ab.com/catalogs
10-24
Publication M117-CA001A-EN-P
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Expansion Power and Field Power Distributor Units
The auxiliary power supports up to 17 I/O modules and an adapter with a maximum of 10 A field power. The 24V DC expansion power unit (1738EP24DC) extends the backplane bus power to support up to 17 more I/O modules. Connect additional expansion power units to expand the I/O
assembly up to the maximum of 63 I/O modules.
Quick Selection
Power to the POINTBus backplane and I/O modules is brought in through the auxiliary power connector. You can connect up to 12 I/O
modules and an adapter with a maximum of 10 A field power, using the auxiliary power. Additional I/O modules require the use of one or
more ArmorPoint I/O 24V DC expansion power units.
9-Ethernet
Switches
The ArmorPoint I/O Expansion Power Unit (1738–EP24DC) passes 24V DC field power to the I/O modules to the right of it. This unit extends
the backplane bus power and creates a new field voltage partition segment for driving field devices for up to 17 I/O modules. The expansion
power unit separates field power from I/O modules to the left of the unit, effectively providing functional and logical partitioning for:
Separating field power between input and output modules
Separating field power to the analog and digital modules
Grouping modules to perform a specific task or function
General
ArmorPoint Expansion Power Unit
PannelConnect
The ArmorPoint I/O Field Power Distributor Module (1738-FPD) passes through all ArmorPoint I/O backplane signals, but does not provide
additional POINTBus backplane power. The field power distributor gives you the ability to change the field power distribution source for I/O
modules to the right of the field power distributor. This facilitates logical or functional partitioning of low-channel count, high I/O mix
applications using any of the communication adapters. Use the field power distributor with a broad range of voltage inputs including 5V DC
to 250V DC and/or 24V AC to 240V AC applications and I/O modules.
10-Distributed
I/O
ArmorPoint Field Power Distributor
6-Ethernet
Switches
Safety
Connection
The ArmorPoint field power distributor (1738-FPD) discontinues the I/O circuit power bus in order to change the field power source for I/O modules to
the right of it. This allows a broad range of voltage inputs in the I/O assembly.
Visit our website: www.ab.com/catalogs
Publication M117-CA001A-EN-P
10-25
On-Machine Distributed I/O
1738 ArmorPOINT I/O
Power Units Specifications, Interface Cable, Bus Extension Bases
Specifications
General
Power Input Voltage
Range
Field Side Power
Requirements
1738-EP24DC
1738-FPD
Cat. No.
Inrush Current, Max.
PointBus Output Current
Rating
Power Consumption, Max.
10…28.8V DC
400 mA @ 24V DC (+20% =
28.8V DC)
6 A for 10 ms
1.3 A
9.8 W @ 28.8V DC
5…150V DC
24…240V AC
⎯
—
⎯
—
Quick Selection
Accessories
ArmorPoint 25-pin D-sub Connector Interface Cable
Cat. No.
1738-CBL3M25DS
Description
ArmorPoint 1 m (3.28 ft) cable assembly with 25-pin D-sub male connector.
The other end of the cable consists of loose wires for connecting to a pneumatic valve interface.
Compatible with 1738-OB16E25DS module.
Bus Extension Bases (1738-EXT1, 1738-EXT3)
An ArmorPoint I/O bus extension base allows the backplane to be extended to additional I/O or the ArmorStart IP 67 motor starter. May
require the addition of an auxiliary power module. Refer to the installation manual (publication 1738–IN018A) to determine if a 1738–EP24DC
or 1738–FPD is needed after a bus extension base.
9-Ethernet
Switches
10-Distributed
I/O
PannelConnect
ArmorPoint Bus Extension Bases
Cat. No.
Description
1738-EXT1
ArmorPoint 1 meter bus extension base
1738-EXT3
ArmorPoint 3 meter bus extension base
ArmorPoint to ArmorStart Bus Extension Bases
Cat. No.
280A-EXT1
Description
ArmorPoint to ArmorStart 1 meter bus extension base
Safety
Connection
6-Ethernet
Switches
Visit our website: www.ab.com/catalogs
10-26
Publication M117-CA001A-EN-P
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising