Hepco & Becker 506667 Tankring Lock-it Instructions
hepco & becker 506667 is a tank ring holder, a device that allows you to mount a tank bag on your motorcycle. It is compatible with the following BMW motorcycle models: F 800 GS Adventure, F 800 GS (from 2008), F 700GS (from 2012), and F 650 GS (34 PS version, from 2008).
The kit includes the following parts:
- 1x set with holder
- 2x cover magnetic dome
- 2x filister head screw M5x50
- 2x filister head screw M5x45
- 2x alu spacer Ø13xØ7x22 black
- 2x alu spacer Ø13xØ7x14 black
- 4x washers Ø5,4
The tank ring holder is
Advertisement
Advertisement
MagnetSystem
TANKRING Halter
Artikel-Nr.: 506.667
BMW F 800 GS Adventure
BMW F 800 GS ab 2008
BMW F 700GS ab 2012
BMW F 650 GS ab 2008 (34 PS Version)
Der Bausatz umfaßt die folgenden Teile:
Stück Position Bezeichnung
1
2
2
2
Montageset mit Halter
Abdeckung Magnetdome
Linsenkopfschrauben M5x50
Linsenkopfschrauben M5x45
Stück Position Bezeichnung
2
2
4
Aludistanzen Ø13xØ7x22 schwarz
Aludistanzen Ø13xØ7x14 schwarz
U-Scheiben Ø5,4
HINWEIS: Verwendung nur mit Daypack, Tourer M oder Tourer L. Max. Beladung 5 kg.
Bei der Montage des Tankrucksacks ist auf die Zugänglichkeit des Zündschlosses zu achten.
Anzugsmomente des Motorradherstellers beachten!
Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren!
Hepco & Becker GmbH
An der Steinmauer 6
D-66955 Pirmasens
Tel.: 06331 - 1453 - 100
Fax: 06331 - 1453 - 120 eMail: [email protected]
www.hepco-becker.de
MagnetSystem
TANKRING Halter
Artikel-Nr.: 506.667
BMW F 800 GS Adventure
BMW F 800 GS ab 2008
BMW F 700GS ab 2012
BMW F 650 GS ab 2008 (34 PS Version)
Die Originalschrauben der Verkleidung demontieren (entfallen)
In die nun freien Bohrungen die Aludistanzen einfügen: vorne Ø13xØ7x14mm und hinten Ø13xØ7x22mm. Die Original-Kunstoffscheiben werden mitverwendet.
Mit den Linsenkopfschrauben sowie U-Scheiben Ø5,4 verschrauben.
vorne Linsenkopfschrauben M5x45 und Linsenkopfschrauben hinten M5x50
Montage
Vorne hinten
Original-Kunstoffscheiben
Als weiteres Zubehör lieferbar:
Motorschutzbügel Art.-Nr.: 501.667
Tankschutzbügel ( mit Hepco & Becker Motorschutzbügel montierbar) Art.-Nr.: 502.667
Tankschutzbügel ( mit Original-BMW-Motorschutzbügel montierbar) Art.-Nr.: 502.606
Lampenschutzgitter Art.-Nr.: 700.667
MagnetSystem
TANKRING holder
Item-no.: 506.667
BMW F 800 GS Adventure
BMW F 800 GS from 2008
BMW F 700GS from 2012
BMW F 650 GS from 2008 (34 PS Version)
The kit includes the following parts:
Quant Position description
1 Set with holder
2
2
2 cover magnetic dome filister head screw M5x50 filister head screw M5x45
Quant Position description
2
2
4 alu spacer Ø13xØ7x22 black alu spacer Ø13xØ7x14 black washers Ø5,4
NOTE: Use only with Daypack, Tourer M or Tourer L. Max load 5kg.
When mounting the tank bag pay attention to the accessibility of the ignition lock.
Observe the tightening torques of the motorcycle manufacturer!
Control all screw connections after the assembling for tightness!
Hepco & Becker GmbH
An der Steinmauer 6
D-66955 Pirmasens
Germany
Tel.: 0049 6331 - 1453 - 100
Fax: 0049 6331 - 1453 - 120 eMail: [email protected]
www.hepco-becker.de
MagnetSystem
TANKRING holder
Item-no.: 506.667
BMW F 800 GS Adventure
BMW F 800 GS from 2008
BMW F 700GS from 2012
BMW F 650 GS from 2008 (34 PS Version)
Dismantle the original screws of the fairing - screws are obsolete.
Add alu spacer into the free borings (original plastic spacers remain) front Ø13xØ7x14mm and rear Ø13xØ7x22mm.
Fix the holder eith filister head screws and washers Ø5,4.
front filister head screws M5x45 and rear filister head screws M5x50
Assembling instructions
front rear
original plastic spacers
Also available:
Engine guard
Tank guard ( mountable with Hepco & Becker engine guard)
Tank guard ( mountable with Original-BMW-engine guard )
Headlight grilles
Item-no.: 501.667
Item-no.: 502.667
Item-no.: 502.606
Item-no.: 700.667

Public link updated
The public link to your chat has been updated.
Advertisement