Hepco & Becker 506012-5 Tankring Lock-it universal 5 hole fastening Instructions
hepco & becker 506012-5
The hepco & becker 506012-5 is a tank ring with a 5-hole fastening for the tank lid. It comes with a magnetic dome, a mounting set including a locking unit, and two covers for the magnetic dome. The required tools for installation are a set, extension, and ratchet. The dimensions of the tank ring are:
- a: 79.0
- b: 79.0
- c: 49.0
- ø: 4
The tank ring is easy to install. First, you need to loosen all the accessible screws. Then, you need to mount the tank ring using the countersunk screws M4x20 and spacers with cone Ø8xØ4,2 x 4mm. Finally, you need to tighten all the screws to the appropriate torque.
Advertisement
Advertisement
TANKRING
MOTO GUZZI mit 5-Loch Befestigung des Tankverschlusses / with 5 hole fastening the tank lid
Art.Nr./Item-no.:
506012-5
Inhalt
1x 700012647 Tankring mit Magnetdome
1x 506000 Montageset inkl. Verschlusseinheit
2x Abdeckung Magnetdome
1x 700011785 Schraubensatz:
3x Senkkopfschraube M4x20
3x Distanz mit Konus Ø8xØ4,2x4mm
Content
1x 700012647 Tank ring with magnetic dome
1x 506000 Mounting set incl. locking unit
2x Cover magnetic dome
1x 700011785 Screw kit:
3x Countersunk screw M4x20
3x Spacer with cone Ø8xØ4,2x4mm
Benötigte Werkzeuge / Required tools
Set Verlängerung/extension
Maße / Dimensions
ø
4 a b c
79,0 79,0 49,0
Ratsche/Ratchet
506012-5 1
Wichtig / Important:
Wenn Sie sich nicht sicher sind,wie man eine bestimmte Arbeit ausführt, sollten Sie diese Ihrer Fachwerkstatt überlassen.
Ziehen sie alle zugänglichen Schrauben zuerst nur locker an. Nachdem alles montiert ist, werden die Schrauben dann auf das entsprechende Anzugsmoment festgezogen. Dadurch wird sichergestellt, dass das Produkt spannungsfrei angebaut ist. Anzugsmomente beachten! Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren!
If you are not sure how to execute a determined action, you should ask your local distributor to do it. First, tighten all screws only loosely. After mounting all parts, the screws should be tightened to the torque specified. This guarantees, that the product is mounted without tension. Observe the tightening torques of the manufacturer! Control all screw connections after the assembling for tightness!
Montageanleitung / Installation Instruction
Montage des Tankrings:
Senkkopfschraube M4x20
Distanz mit Konus Ø8xØ4,2 x 4mm
1
Fastening of the tank ring:
Countersunk screw M4x20
Spacer with cone Ø8xØ4,2 x 4mm
Weiteres Zubehör auf www.hepco-becker.de / More accessories see www.hepco-becker.de
HEPCO&BECKER GmbH | An der Steinmauer 6 | 66955 Pirmasens | Germany | Tel. +49 6331 1453100 | Fax: +49 6331 1453 120 | Mail: [email protected]
506012-5 2

Public link updated
The public link to your chat has been updated.
Advertisement