Advertisement
Advertisement
Mini-Gepäckbrücke
ROYAL ENFIELD
Continental GT 535
(2012-2018)
Artikel-Nr.:
660.7534 01 01 schwarz
- nicht topcasetauglich
Montage
Der Bausatz umfaßt die folgenden Teile:
Stück Bestellnr. Bezeichnung
1 700008761 Rohrgepäckbrücke schwarz
1 700008762 Schraubensatz, bestehend aus:
Seitenkoffer
Topcases
Gepäckträger
Lock it System
Softbags
Aluminiumkoffer
Lederkoffer
Schutzbügel
Hauptständer
Chopper-Parts
Accessoires
4
4
Inbusschraube M8 x 20mm
U-Scheibe ø8,4
Montagehinweis:
Die Voraussetzung für die Montage ist natürlich eine gewisse technische Erfahrung. Wenn Sie sich nicht sicher diese Ihrer Fachwerkstatt überlassen.
Ziehen sie alle zugänglichen Schrauben zuerst nur locker an. Nachdem alles montiert ist, werden die Schrauben dann auf das entsprechende Anzugsmoment festgezogen. spannungsfrei angebaut ist.
Anzugsmomente des Motorradherstellers beachten!
Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren!
Bitte beachten Sie unsere beigefügten Serviceinformationen.
Als weiteres Zubehör lieferbar:
C-Bow Halter für Softtaschen
Hepco & Becker GmbH
An der Steinmauer 6
D-66955 Pirmasens
Art.-Nr.: 630.7534
Tel.: 06331 - 1453 - 100
Fax: 06331 - 1453 - 120 eMail: [email protected]
www.hepco-becker.de
1
Mini-Gepäckbrücke
ROYAL ENFIELD
Continental GT 535
(2012-2018)
Artikel-Nr.:
660.7534 01 01 schwarz
- nicht topcasetauglich
Montage
Vorbereitung:
Zur Montage das Motorrad auf den
Hauptständer stellen und das
Hinterrad unterbauen, so dass die oberen Schrauben der Stoßdämpfer herausgedreht werden können, ohne dass das Hinterrad absinkt.
Montage der Gepäckbücke vorne:
Die obere Schraube des
Stoßdämpfers entfernen. Die
Gepäckbrücke wird vorne mit den
Stoßdämpfern verschraubt. Der Griff auf der linken Seite entfällt. Zur
Befestigung werden die
Original-schrauben und Scheiben verwendet.
1
Seitenkoffer
Topcases
Gepäckträger
Lock it System
Softbags
Aluminiumkoffer
Lederkoffer
Schutzbügel
Hauptständer
Chopper-Parts
Accessoires
Montage der Gepäckbücke hinten:
Die Gepäckbrücke wird hinten an den
Gewinde M8 an der Unterseite des
Heckrahmens verwendet ( je Seite 2
Verschraubungspunkte ).
Hierzu die Inbusschrauben M8 x
20mm und U-Scheiben ø8,4 verwenden.
2
4x 4x
2
Rear rack
ROYAL ENFIELD
Continental GT 535
(2012-2018) item.-no.:
660.7534 01 01 black
- not suitable for top cases
Assembling instructions
The kit includes the following parts:
Quant item no. description
1 700008761 rear rack black
1 700008762 Screw kit, contains:
4
4 allen screw M8 x 20mm washer ø8,4
Side cases
Top cases luggage frames
Lock it system
Softbags
Aluminium luggage
Leather luggage
Protection bars
Center stands
Chopper parts
Accessories
Of course, the assembly requires a certain technical experience. If you are not sure how to execute a determined action, you should ask your local distributor to do it.
First, tighten all screws only loosely. After mounting all parts, the screws should be tightened to the torque specified. This guarantees, that the product is mounted without tension.
Control all screw connections after the assembling for tightness!
Please notice our enclosed service information.
Also available:
C-Bow Holder for softbags item-no 630.7534
Hepco & Becker GmbH
An der Steinmauer 6
D-66955 Pirmasens
Germany
Tel.: +49 (0)6331 - 1453 - 100
Fax: +49 (0)6331 - 1453 - 120 eMail: [email protected]
www.hepco-becker.de
1
Rear rack
ROYAL ENFIELD
Continental GT 535
(2012-2018) item.-no.:
660.7534 01 01 black
- not suitable for top cases
Assembling instructions
Preparing:
Provide for mounting the bike on the center stand and prop up the rear wheel, so that it can´t change position.
This makes it easier to dismantle and mount the top screws of the shock absorbers.
1
Side cases
Top cases luggage frames
Lock it system
Softbags
Aluminium luggage
Leather luggage
Protection bars
Center stands
Chopper parts
Accessories
Fastening of the rear rack front:
Dismantle the top screw of the shock absorber. The rack will be fixed together with the shock absorber with original screws and washers.
The handle bar on the left is obsolete.
Fastening of the rear rack back:
Die Gepäckbrücke wird hinten at the two free threads M8 on the underside of the rear frame tube (each side 2 screw points).
Use allen screws M8 x 20mm with washers ø8,4.
2
4x 4x
2

Public link updated
The public link to your chat has been updated.
Advertisement