Hepco & Becker 5064571 00 01 Tankring Lock-it Instructions
Advertisement
Advertisement
TANKRING
YAMAHA MT-07
(2021-)
Art.Nr./Item-no.:
5064571 00 01 schwarz/black
YAMAHA Tracer 9 / GT
(2021-)
Art.Nr./Item-no.:
5064572 00 01 schwarz/black
MT-07: Nur passend für Street Tourer M / Daypack und Royster Tankbag / Daypack.
Tracer 9: Nur passend für Street Daypack und Royster Tankbag / Daypack.
MT-07: Only suitable for Street Tourer M / Daypack and Royster tank bag / Daypack.
Tracer 9: Only suitable for Street Daypack and Royster Tankbag / Daypack.
Inhalt
1x 700012704 Tankring mit Magentdome
1x 506000 Montageset inkl. Verschlusseinheit
2x Abdeckung Magnetdome
1x 700012714 Schraubensatz:
3x Senkkopfschraube M5x35
3x Distanz Ø8,4xØ5,3x7,5mm
Content
1x 700012704 Tank ring with magnetic dome
1x 506000 Mounting set incl. locking unit
2x Cover magnetic dome
1x 700012714 Screw kit:
3x Countersunk screws M5x35
3x Spacer Ø8,4xØ5,3x7,5mm
Benötigte Werkzeuge / Required tools
Set Verlängerung/extension Ratsche/Ratchet
5064571 00 01 / 5064572 00 01 1
Wichtig / Important:
Wenn Sie sich nicht sicher sind,wie man eine bestimmte Arbeit ausführt, sollten Sie diese Ihrer Fachwerkstatt überlassen.
Ziehen sie alle zugänglichen Schrauben zuerst nur locker an. Nachdem alles montiert ist, werden die Schrauben dann auf das entsprechende Anzugsmoment festgezogen. Dadurch wird sichergestellt, dass das Produkt spannungsfrei angebaut ist. Anzugsmomente beachten! Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren!
If you are not sure how to execute a determined action, you should ask your local distributor to do it. First, tighten all screws only loosely. After mounting all parts, the screws should be tightened to the torque specified. This guarantees, that the product is mounted without tension. Observe the tightening torques of the manufacturer! Control all screw connections after the assembling for tightness!
Vorbereitende Maßnahmen / Preparatory actions
Die 3 Originalschrauben demontieren, diese entfallen.
Remove the 3 original screws, these are omitted.
Montageanleitung / Installation Instruction
Montage des Tankrings:
Die Distanzen Ø8,4xØ5,3x7,5mm in die freien Bohrungen einstellen. Den
Lock-it Tankring aufsetzten und mit den
Senkkopfschrauben M5x35 verschrauben.
1
Fastening of the tank ring:
Put spacers Ø8,4xØ5,3x7,5mm in the free borings. Fix the tank ring unit with countersunk screws M5x35.
3x
3x
Weiteres Zubehör auf www.hepco-becker.de / More accessories see www.hepco-becker.de
HEPCO&BECKER GmbH | An der Steinmauer 6 | 66955 Pirmasens | Germany | Tel. +49 6331 1453100 | Fax: +49 6331 1453 120 | Mail: [email protected]
5064571 00 01 / 5064572 00 01 2

Public link updated
The public link to your chat has been updated.
Advertisement