Hepco & Becker 506011-7 Tankring Lock-it universal 7 hole mounting Instructions
Advertisement
Advertisement
TANKRING
KTM mit 7-Loch Befestigung des Tankverschlusses / with 7 hole fastening the tank lid
Art.Nr./Item-no.:
506011-7
Inhalt
1x 700012646 Tankring mit Magnetdome
1x 506000 Montageset inkl. Verschlusseinheit
2x Abdeckung Magnetdome
1x 700011784 Schraubensatz:
4x Senkkopfschraube M5x35
Content
1x 700012646 Tank ring with magnetic dome
1x 506000 Mounting set incl. locking unit
2x Cover magnetic dome
1x 700011784 Screw kit:
4x Countersunk screw M5x35
Benötigte Werkzeuge / Required tools
Set Verlängerung/extension
Maße / Dimensions
ø
5 a b c d
74,6 74,6 74,6 41,4
Ratsche/Ratchet
506011-7 1
Wichtig / Important:
Wenn Sie sich nicht sicher sind,wie man eine bestimmte Arbeit ausführt, sollten Sie diese Ihrer Fachwerkstatt überlassen.
Ziehen sie alle zugänglichen Schrauben zuerst nur locker an. Nachdem alles montiert ist, werden die Schrauben dann auf das entsprechende Anzugsmoment festgezogen. Dadurch wird sichergestellt, dass das Produkt spannungsfrei angebaut ist. Anzugsmomente beachten! Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren!
If you are not sure how to execute a determined action, you should ask your local distributor to do it. First, tighten all screws only loosely. After mounting all parts, the screws should be tightened to the torque specified. This guarantees, that the product is mounted without tension. Observe the tightening torques of the manufacturer! Control all screw connections after the assembling for tightness!
Montageanleitung / Installation Instruction
Montage des Tankrings:
Senkkopfschraube M5x35
1
Fastening of the tank ring:
Countersunk screw M5x35
Weiteres Zubehör auf www.hepco-becker.de / More accessories see www.hepco-becker.de
HEPCO&BECKER GmbH | An der Steinmauer 6 | 66955 Pirmasens | Germany | Tel. +49 6331 1453100 | Fax: +49 6331 1453 120 | Mail: [email protected]
506011-7 2

Public link updated
The public link to your chat has been updated.
Advertisement