QUICK INFO – SET UP
Fridge-tag 2 L
1
Packaging content
Fridge-tag
External sensor
(optional)
Note: If you have ordered a Fridge-tag with an external sensor, place the external sensor in its predetermined location, before activating the device.
Placing the Fridge-tag?
See point 8
3
State of delivery
You receive the Fridge-tag in sleep mode. The display
(LCD) is blank.
3 3
Note: If required note the date of activation on the back of the Fridge-tag.
4
Activation of the device
Note: Once the device has been activated, it cannot be stopped anymore.
d d __ y y y y
3
3
6
Setting the date and time
The READ button is used to adjust the numbers. Each time you press the READ button, the number in the flashing digit will increase by 1.
The SET button is used to save the number. After pressing the SET button, the next digit will start flashing.
3
02 2 0 1 8
The 1st digit is flashing:
Press READ until « » appears as the first digit.
Press SET to save the digit.
Go on with the next digits in the same way until date and time is set.
Correct or change settings?
See user manual in chapter « Learn More »
8
Placing the Fridge-tag
The activated Fridge-tag must be placed immediately in its predetermined location. It is recommended and important to place the device in the centre of the refrigerator for an optimal temperature observation.
External sensor
Two hours before activating the device the external sensor must be placed in its predetermined location. It is recommended and important to place the external sensor in the centre of the refrigerator for an optimal temperature observation and to avoid any incorrect measurements when starting the device.
Placing the Fridge-tag?
See user manual in chapter « Learn More »
2
Fridge-tag information
Temperature status
30 days history
Profile
(alarm zones)
Set button max.
Int.Sensor
1 05
°C
Temperature measured
Port to insert external sensor
Logger ID
Read button
To activate the device, press the SET and the READ buttons simultaneously for more than 3 seconds. The following calendar format will appear: dd.mm.yyyy.
Note: After approx. 60 seconds without pressing any button of the Fridge-tag the device goes back into sleep mode. Start from the beginning.
5
Setting the calendar format
Press READ to change the calendar format.
_ _ dd y y y y
Option 1
Setting the calendar format to: dd.mm.yyyy
Option 2
Setting the calendar format to: mm.dd.yyyy
Then press SET to save the calendar format.
7
Activation completed
As soon as the last digit of the time setting is confirmed, the activation is completed. Now place the Fridge-tag. If you have a device with external sensor, connect the device with the external sensor. During max. 1 minute after activation no temperature is displayed on the screen.
Connection error?
See user manual in chapter « Learn More »
Fridge-tag
Support
Learn More
User Manual Product information
Berlinger
Website
Video Technical
Specification
Scan the QR code or click on www.berlinger.com/ support/fridge-tag-2-l
QUICK INFO – USER GUIDE
Fridge-tag 2 L
1
Temperature status
Indication of an OK display
In measurement mode, when no alarm has been triggered, the following information is indicated:
The OK symbol
6 02 2 0 1 8
Int.Sensor
56
°C
The current date and time
The current temperature
Indication of an alarm display
In measurement mode, when an alarm has been triggered, the following information is indicated
The additional warning symbol
The upper/lower
Alarm indicator
The alarm symbol
!
02 2 0 1 8
Int.Sensor
88
°C
The current temperature
The current date and time
Alarm display and confirmation options?
See user manual in chapter « Learn More »
2
Reading the history
Example of an OK display
The OK symbol max.
Int.Sensor
1 05
°C
The corresponding flashing arrow
1
Press
READ once
The time duration out of the preset temperature high limit
The highest recorded temperature of that day
Example of an alarm display
The alarm and the warning symbol
!
1 6 02 2 0 1 8
The data and time of the alarm
1
Press
READ once
The corresponding flashing alarm indicator
Acknowledge alarm and buzzer details?
See user manual in chapter « Learn More »
Alarm display: additional information max.
Int.Sensor
1 05
°C
Press READ a second time for additional information.
2
Note: Continue repetitively pressing the READ button to read out the details of the past 30 days.
max.
Int.Sensor
1 05
°C
Press and hold READ
Super-Jump Function
for 3 seconds for the Alarm-
Note: Press and hold the READ button again for at least 3 seconds and the next alarm event will appear on the screen.
Acknowledge alarm?
See user manual in chapter « Learn More »
3
Download reports
Connect the device via USB with your
PC/MAC.
Note: Disconnect the external sensor from the device first.
The Fridge-tag will now generate a PDF and an ASCII report. This process can take up to 2 minutes.
Download reports?
See user manual in chapter « Learn More »
For more information click on www.berlinger.com/support/fridge-tag-2-l
Berlinger & Co. AG
Mitteldorfstrasse 2
9608 Ganterschwil
Switzerland
Tel. +41 71 982 88 11 [email protected] www.berlinger.com
400-01230_1