Advertisement
Advertisement
STOP
PARE
Missing A Part?
CALL US BEFORE GOING
BACK TO THE STORE!
The store where you made your purchase does not stock parts for this item.
If you have assembly questions or if you need parts, whether they are missing or damaged
Call Toll-Free Help Line or visit www.swingsetsonline.com
¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA!
La tienda donde realizó la compra no almacena piezas de este producto.
Si tiene preguntas sobre el ensamblaje o si necesita piezas debido a que faltan o están dañadas llame gratis a la línea de ayuda
1-800-856-4445
PLEASE READ THIS BEFORE STARTING ASSEMBLY
POR FAVOR LEA ESTAS INSTRUCCIONES ANTES DE COMENZAR EL ENSAMBLAJE
•
READ THE ASSEMBLY MANUAL COMPLETELY, PAYING SPECIAL ATTENTION TO THE IMPORTANT TIPS AND
SAFETY INFORMATION.
• AFTER YOU HAVE READ THE ASSEMBLY MANUAL, YOU WILL BE ABLE TO DECIDE IF YOU NEED PROFESSIONAL
HELP TO COMPLETE THE ASSEMBLY OF THE STRUCTURE.
•
•
SEPARATE AND IDENTIFY ALL PARTS TO MAKE SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
IF YOU CAN’T FIND ALL OF THE PARTS, CHECK THE PACKING MATERIAL. SMALL PARTS MAY HAVE FALLEN INTO IT
DURING SHIPMENT.
• IF YOU HAVE PROBLEMS WITH THE ASSEMBLY OR IF ANY PART IS MISSING OR DAMAGED, PLEASE CALL THE
HELP LINE 1-800-856-4445 OR VISIT www.swingsetsonline.com
•
LEA EL MANUAL DE ENSAMBLAJE COMPLETAMENTE, PRESTANDO ESPECIAL ATENCIÓN A LOS CONSEJOS ÚTILES
IMPORTANTES Y A LA INFORMACIÓN SOBRE SEGURIDAD.
• DESPUÉS DE QUE HAYA LEÍDO EL MANUAL DE ENSAMBLAJE, PODRÁ DECIDIR SI NECESITA AYUDA PROFESIONAL
PARA EFECTUAR EL ENSAMBLAJE DE LA ESTRUCTURA.
• SEPARE E IDENTIFIQUE TODAS LAS PIEZAS PARA COMPROBAR QUE DISPONE DE TODAS LAS PARTES INDICADAS.
•
SI NO PUEDE ENCONTRAR TODAS LAS PIEZAS, REVISE EL MATERIAL DE EMPAQUE. ES POSIBLE QUE ALGUNAS
PIEZAS PEQUEÑAS PUEDAN HABERSE CAÍDO ALLÍ DURANTE EL ENVÍO.
• MANTÉNGASE ALEJADO DE LOS NIÑOS MENORES A LA EDAD RECOMENDADA .
• SI TIENE PROBLEMAS CON EL ENSAMBLAJE O SI ALGUNA PIEZA FALTA O ESTÁ DAÑADA, LLAME A LA LÍNEA DE
AYUDA AL 1-800-856-4445 O VISITE www.swingsetsonline.com
PLEASE HAVE THE FOLLOWING INFORMATION WHEN YOU MAKE YOUR CALL:
1 – MODEL NUMBER OF THE PRODUCT LOCATED ON THE FRONT OF THE ASSEMBLY MANUAL
2 – DESRIPTION OF THE PART FROM THE PARTS LIST
POR FAVOR TENGA VISIBLE LA SIGUIENTE INFORMACIÓN CUANDO LLAME:
1 - NÚMERO DE MODELO DEL PRODUCTO QUE SE ENCUENTRA UBICADO AL FRENTE DEL MANUAL
DE ENSAMBLAJE
2 - DESCRIPCIÓN DE LA PIEZA QUE SE ENCUENTRA EN LA LISTA DE PIEZAS
Owner’s Manual Play House
Dear Customer:
Please read entire booklet completely before beginning the assembly process.
Equipment is recommended for use by children 2 to 10 years of age . Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School ,
Recreational Park, or any similar Commercial Application.
WARNING : This Symbol points out important safety instructions which, if not followed, could endanger the personal safety of yourself and your children and/or damage your property. You MUST read and follow all instructions in this manual before attempting to use this play house.
WARNING : Children must NOT use this play house until unit has been completely assembled and inspected by an adult to insure set has been properly assembled. Please follow all recommendations below. Failure to do so may result in the warranty being void and/or safety violations that could result in serious injury . This manual contains helpful information concerning
Assembly Preparation, Installation Procedure, and Required Maintenance. Always keep the safety of your children in mind as your play structure is being built and as your children play with the unit. Before your children play with the unit please review the Operation Instructions with them to help ensure their safety .
PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THEM IN A SAFE
PLACE WHERE YOU CAN REFER TO THEM AS NEEDED. IN ORDER TO PROVIDE YOU WITH THE
MOST EFFICIENT SERVICE, IT IS REQUIRED THAT YOU PROVIDE US WITH THE PART NUMBERS
WHEN ORDERING PARTS.
For Your Records:
Please take time and fill out the information below. This information will be needed for warranty issues.
Where Purchased: ______________
Staple Receipt Here
Date of Purchase: ________________
Installation Date: _______________
Installed by: ______________________
Tracking Number Reference Label
Tracking ID number on the carton and back of the ID plate are included for tracking purposes associated with warranty claims.
OWNER PH-2011
Owner’s Manual Play House
Please refer to the Assembly section of the Assembly Manual for Maximum
Fall Height.
Positioning Your Play house
1. The Play house is designed to be installed on a level surface by an Adult with an
Adult helper . Place in a flat area of your yard to minimize ground preparation.
2. Choose a level location for the equipment. This can reduce the likelihood of the play house tipping over and loose-fill surfacing material washing away during heavy rains.
3. Place the equipment not less than 6 ft (1.8 m) from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
4. It is a good idea to place your Play house in an area that is convenient for adults to watch children at play.
5. Create a site free of obstacles that could cause injuries – such as low overhanging tree branches, overhead wires, tree stumps and/or roots, large rocks, bricks and concrete. We have additional suggestions in the Suggested Playground Surfacing
Section.
6. Do not build your play house on top of surfacing material.
Suggested Playground Surfacing
Playground equipment should never be placed on hard surfaces such as concrete or asphalt.
Do not install loose fill surfacing over hard surfaces such as concrete or asphalt.
Shredded bark mulch, wood chips, fine sand and fine gravel, are added as shock absorbing materials after assembly. If used properly these materials can absorb some of the impact of a child’s fall.
All surface material should extend a minimum of 6 feet or (1.8 m) in all directions around the play area.
Do not apply playground surfacing until after the unit is completely constructed. Play house should not be built on top of surfacing.
Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging.
Installations of rubber tiles or poured-in-place surfaces (other than loosefill materials) generally require a professional and are not “do-it-yourself” projects.
Shall use Playground Surfacing Materials (other than loose-fill material) which comply with the safety standard ASTM F1292 Standard
Specification of Impact Attenuation of Surfacing Materials within the Use
Zone of Playground Equipment.
OWNER PH-2011
Owner’s Manual Play House
The following chart explains the fall height in feet from which a life threatening head injury would not be expected
Critical Heights in feet (m) of Tested Materials
Material Uncompressed Depth Compressed Depth
Wood Chips
Double-Shredded bark mulch
Engineered Wood Fibers
Fine Sand
Coarse Sand
Fine Gravel
Medium Gravel
6" (152mm)
7' (2.13m)
6' (1.83m)
6' (1.83m)
5' (1.52m)
5' (1.52m)
5' (1.52m)
5' (1.52m)
9" (228mm) 12" (304mm)
10' (3.05m) 11' (3.35m)
10' (3.05m) 11' (3.35m)
7' (2.13m) >12' (3.66m)
5' (1.52m) 9' (2.74m)
5' (1.52m)
7' (2.13m)
5' (1.52m)
6' (1.83m)
10' (3.05m)
6' (1.83m) to 9" (228mm)
10' (3.05m)
7' (2.13m)
6' (1.83m)
5' (1.52m)
4' (1.22m)
6' (1.83m)
5' (1.52m)
Shredded Tires* 10-12' (3.0-3.6m) N/A N/A N/A
*This data is from tests conducted by independent testing laboratories on a 6-inch depth of uncompressed shredded tire samples produced by four manufacturers. The tests reported critical heights, which varied from 10 feet to greater than 12 feet. It is recommended that persons seeking to install shredded tires as a protective surface request test data from the supplier showing the critical height of the material when it was tested in accordance with ASTM F1292.
Operating Instructions:
NOTE : Your children’s safety is our #1 concern. Observing the following statements and warnings reduces the likelihood of serious or fatal injury. Please review these safety rules regularly with your children.
1. On-site adult supervision is required .
2. Instruct children not to climb when the equipment is wet.
3. Instruct children to never crawl on top of a play house roof.
4. The parents should have the children dress appropriately with well-fitting shoes. Loose clothing such as scarves and ponchos should not be worn.
Always take off, tie up or tuck in cords and drawstrings on children’s clothing. These things can get caught on playground equipment and strangle a child.
5. Instruct children not to attach items to the equipment that are not specifically designed for use with that equipment (such as ropes, clothesline, pet leashes, etc.).
6. Instruct children to remove their bike or other sports helmet before playing on the playground equipment.
Maintenance Instructions:
At the beginning of each play season:
•
Tighten all hardware.
•
Lubricate all metallic moving parts per manufacture’s instructions.
•
Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose, cracked, or missing.
OWNER PH-2011
Owner’s Manual Play House
•
Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed.
•
Check metal parts for rust. If found, sand and repaint using non Lead-based paint meeting the requirements of Title 16 CRF Part 1303 .
•
Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
•
Check all wood members for deterioration and splinters. Sand down and splinters and replace deteriorating members.
•
Reinstall any plastic parts, such as swing seats or any other items that were removed in the cold season.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary.
Twice a month during play season:
•
Tighten all hardware.
•
Lubricate all metallic moving parts per manufacture’s instructions.
•
Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose, cracked, or missing.
•
Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or deterioration. Replace as needed.
•
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary.
At the end of each play season or when the temperature drops below 32° F:
• Remove plastic swing seats and other items as specified by the manufacturer and take indoors or do not use.
• Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary.
Additional Maintenance:
•
Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season.
•
Inspect all wood members monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment. Treat your play house with stain regularly, to help prevent severe checking/splitting and other weather damage.
•
We have applied a waterborne transparent stain to your unit. This is done for color only. Once or twice a year, depending on your climate conditions, you must apply some type of protection (sealant) to the wood of your unit. Prior to the application of sealant, lightly sand any “rough” spots on your play house. Please note this is a requirement of your warranty.
•
Creating and maintaining the Play house on a level location is very important.
Make sure the play house is level and true once each year or at the beginning of each play season.
•
Rake the surface periodically to prevent compaction and maintain appropriate depths.
Owners shall be responsible for maintaining the legibility of the warning labels.
OWNER PH-2011
is discarded.
Owner’s Manual Play House
OWNER PH-2011
Owner’s Manual Play House
APPENDIX A
Information on Playground Surfacing Materials:
The following information is from the United States Consumer Product Safety
Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: . www.cpsc.gov/cpscpub/pubs/323.html
X3. CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS 11
X3.1 Select Protective Surfacing —One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F 1292 . There are different types of surfacing to choose from; whichever product you select, follow these guidelines:
X3.1.1 Loose-Fill Materials:
X3.1.1.1 Maintain a minimum depth of 9 inches of loose-fill materials such as wood mulch/chips, engineered wood fiber (EWF), or shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea gravel for equipment up to 5 feet high. NOTE: An initial fill level of 12 inches will compress to about a 9-inch depth of surfacing overtime. The surfacing will also compact, displace, and settle, and should be periodically refilled to maintain at least a 9-inch depth.
X3.1.2 Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If maintained properly, this should be adequate. (At depths less than 6 inches, the protective material is too easily displaced or compacted.) NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environmental factors can reduce their shock absorbing effectiveness.
Carpeting and thin mats are generally not adequate protective surfacing. Ground level equipment such as a sandbox, activity wall, playhouse or other equipment that has no elevated play surface – does not need any protective surfacing.
X3.1.3 Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don’t forget to account for water drainage.
X3.1.3.1 Check and maintain the depth of the loose-fill surfacing material. To maintain the right amount of loose-fill materials, mark the correct level on play equipment support posts.
That way you can easily see when to replenish and/or redistribute the surfacing. asphalt.
X3.1.3.2 Do not install loose-fill surfacing over hard surfaces such as concrete or
X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles — You may be interested in using surfacing other than loose-fill materials – like rubber tiles or poured-in-place surfaces.
X3.1.4.1 Installations of these surfaces generally require a professional and are not “doit-yourself” projects.
X3.1.4.2 Review surface specification before purchasing this type of surfacing. Ask the installer/manufacturer for a report showing that the product has been tested to the following safety standard: ASTM F 1292 Standard Specification for Impact Attenuation of Surfacing
Materials within the Use Zone of Playground Equipment. This report should show the specific height for which the surface is intended to protect against serious head injury. This height should be equal to or greater than the fall height – vertical distance between a designated play surface
(elevated surface for standing, sitting, or climbing) and the protective surfacing below – of your play equipment.
X3.1.4.3 Check the protective surfacing frequently for wear.
X3.1.5 Placement — Proper placement and maintenance of protective surfacing is essential. Be sure to:
X3.1.5.1 Extend surfacing at least 6 feet from the equipment in all directions.
OWNER PH-2011
Owner’s Manual Play House
11 This information has been extracted from the CPSC publications “Playground
Surfacing — Technical Information Guide” and “Handbook for Public Playground Safety.”
Copies of these reports can be obtained by sending a postcard to: Office of Public Affairs, U.S.
Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1-
800-638-2772.
The American Society for Testing and Materials takes no position respecting the validity of any parent right asserted in connection with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of any such parent rights, and the risk of infringement of such rights, are entirely their own responsibility.
The standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and if not revised, either approved or withdrawn. Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM Headquarters. Your comments will receive careful consideration at a meeting of the responsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you should make your views known to the ASTM
Committee on Standards. 100 Barr Harbor Drive, West Conshohocken, PA 19428.
OWNER PH-2011
Play House Assembly Manual FAQs:
1. Does the area for the play house need to be level? Yes. Backyard Discovery recommends the play house be positioned on a flat level area for maximum safety and durability. Any stakes provided should be used to secure it firmly to the ground.
2. What size area is recommended for the play house? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the play house for maximum safety.
3. What age range is appropriate for the play houses? Backyard Discovery play houses are recommended for children ages 2 – 10 years.
4. Is the wood treated with chemicals? Backyard Discovery uses 100% Chinese Cedar wood which is naturally bug resistant, decay and rot resistant. To help ensure your child’s safety, our wood is completely chemical free and we do not use pressure-treated wood. The stain we use is a top coat using a water-based product that is for appearance only.
5. How often should the play house be stained? Backyard Discovery recommends the play house be stained once each year. A water or oil based stain can be used at the customer’s discretion.
6. Why does it seem that my play house is developing cracks? Wood is a natural material; no two pieces are exactly alike. Each piece has its own characteristics and personality and reacts differently to climate changes.
When any wood product is exposed to the elements, it develops “wood checks”. A check is the radial separation of the wood fibers running with the grain of the wood. These are caused by the varying temperature and moisture conditions. A check is not a crack – it does not affect the strength or durability of the wood or structural integrity of the play house.
7. Do Backyard Discovery play houses come with a warranty? Yes. All Backyard Discovery products carry a 1year replacement warranty on all parts for manufacturer’s defect. Our wood carries a 5 year warranty on rot and decay as well. Please see warranty details for more information.
8. What is the best way to get started assembling the play house? Backyard Discovery recommends taking all the parts out of the boxes and arranging them by part number before you begin any assembly. This will not only allow faster assembly, but will also identify any parts that may be missing or damaged so they can be replaced before assembly. If parts are missing or need replacement, go to www.swingsetsonline.com/support.aspx and follow the prompts to order them. Next, read the assembly manual and get the tools ready for the job as recommended in the manual. If the assembly manual is lost or misplaced a new one can be printed from Backyard Discovery’s website: www.swingsetsonline.com
.
9. The play house seems to rock or sway too much. What’s wrong? Rocking is caused by uneven ground or obstructions such as rocks, roots, etc. under the ground rails. These should be removed and the ground underneath re-leveled to prevent rocking. Also ensure the play house is securely staked to the ground using any stakes provided.
10. The 2”x4” boards do not measure 2”x 4”. Why not? In the U.S. it’s common practice to describe lumber dimensions using the rough cut sizes from the sawmill and not the finished dimensions. Retailers, home stores, etc. all use this accepted practice for describing lumber dimensions. However, Backyard Discovery play houses are designed and constructed using the actual dimensions so everything fits properly and remains so during the life of the play house.
For more information and frequently asked questions, please refer to our website at www.swingsetsonline.com
.
« SPANISH
SAFETY AND ASSEMBLY INFORMATION
SELECTING THE CORRECT LOCATION FOR YOUR PLAY PRODUCT IS IMPORTANT
FOR YOUR CHILDREN’S SAFETY AND THE PRODUCT’S LONGEVITY
Dimensions:
• The Victorian Mansion has one layout option.
Layout: Ground Dimension
10'-7-
7
8
" x 7'-4-
1
8
" x 10'-10-
1
4
" Tall
Safe Play Area*
16'-7-
7
8
" x 13'-4-
1
8
" x 16'-10-
1
4
" Tall
*Level Ground Surface - See below
General Information:
Your set has been designed and engineered for
children only and for residential use only.
A maximum of 150 lbs. per child is recommended for
play activities designed for individual use.
A maximum of 120 lbs. per child is recommended for
play activities designed for multiple child use.
A maximum of 6 children is recommended for this unit.
Safe Play Area:
• The safe play area refers to a zone extending 6' beyond the play product on all sides, including the space above the play product.
• The ground surface
must be level
. Installing your play product on sloping ground can cause it to lean or "rack". This leaning puts additional stress on all connections and joints and in time will cause those connections to loosen and fail.
• The safe play area must be free of all structures, landscaping, trees and branches, rocks, wires, and other obstacles to safe play. Children can be seriously injured running or swinging into these obstacles.
• Remove all tripping hazards from the safe play area. Tripping hazards include: roots, stumps, rocks, landscaping, sprinkler heads, railroad ties, plumbing and electrical connections.
• Play product needs to be installed on solid ground.
SAFE PLAY AREA DIAGRAM
22'-7 7/8"
10'-7 7/8"
7'-4 1/8" 19'-4 1/8"
6'-0"
6'-0"
SAFE PLAY ZONE
BASIC SETUP DIMENSIONS
45°
10'-10 1/4" O.A.
3'-9"
DOOR
OPENING
1'-7 3/4"
DOOR
OPENING
10'-1 7/8"
10'-8 7/8" O.A.
5'-5 1/8"
7'-4 1/8" O.A.
4'-5 7/16"
MAX FALL
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
AA1 - SUPPORT POST - W4L07402
2"x2"x77 7/8" (50x50x1978)
(1)
AA2 - SUPPORT POST - W4L07404
2"x2"x47 3/8" (50x50x1204)
(1)
AA3 - SUPPORT POST - W4L07407
2"x2"x39 5/8" (50x50x1008)
(2)
AA4 - SUPPORT POST - W4L07409
2"x2"x33 7/8" (50x50x860)
(1)
AA5 - SUPPORT POST - W4L07410
2"x2"x62 1/4" (50x50x1582)
(1)
AA6 - LEFT PORCH POST - W4L07443
2"x2"x49 7/8" (50x50x1268)
(1)
AA7 - RIGHT PORCH POST - W4L07444
2"x2"x49 7/8" (50x50x1268)
(2)
E7 - HANDRAIL BLOCK - W4L06678
1 3/8"x3 3/8"x1" (36x86x26)
(2)
F1 - HEADER BOARD - W4L07457
1 1/4"x3 3/8"x58 1/8" (32x86x1476)
(2)
G1 - WALL SUPPORT - W4L07210
1"x5 1/4"x6 3/4" (24x134x170)
(2)
G2 - WALL SUPPORT - W4L07433
1"x5 1/4"x6 3/4" (24x134x170)
Parts Identification
Wood Components
(NOT TO SCALE)
(4)
G3 - GABLE BOARD - W4L07458
1"x5 1/4"x52 5/8" (24x134x1337)
(1)
H1 - WALL BOARD - W4L07405
1"x3 3/8"x30 3/8" (24x86x773)
(1)
H2 - WALL BOARD - W4L07421
1"x3 3/8"x30 3/8" (24x86x773)
(2)
J1 - BAY WINDOW SIDE - W4L07181
1”x1 7/8”x18 1/4” (24x48x464)
(2)
J2 - SUPPORT BOARD - W4L07211
1"x2 3/8"x6 3/4" (24x60x170)
(2)
J3 - FLOOR JOIST - W4L07392
1"x2 3/8"x80" (24x60x2032)
(1)
J4 - FLOOR JOIST - W4L07393
1"x2 3/8"x56 1/4" (24x60x1428)
(4)
J5 - FLOOR JOIST - W4L07398
1"x2 3/8"x41 1/8" (24x60x1046)
(2)
J6 - FLOOR JOIST - W4L07399
1"x2 3/8"x56 1/4" (24x60x1428)
(2)
J7 - PORCH CORBEL - W4L07230
1"x2 3/8"x9" (24x60x230)
(4)
J8 - FLOOR JOIST - W4L07401
1"x2 3/8"x39 3/8" (24x60x999)
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
J9 - FLOOR JOIST - W4L07403
1"x2 3/8"x56 1/4" (24x60x1428)
(1)
J10 - STAIR JOIST - W4L07411
1"x2 3/8"x18 1/8" (24x60x460)
(2)
J11 - STAIR JOIST - W4L07412
1"x2 3/8"x15 1/4" (24x60x387)
(2)
J12 - FILLER BOARD - W4L07427
1"x1 7/8"x19 1/2" (24x48x496)
(2)
J13 - PORCH ROOF SUPPORT - W4L07450
1"x2 3/8"x20 1/8" (24x60x510)
(1)
J14 - FLOOR JOIST - W4L07400
1"x2 3/8"x56 1/4" (24x60x1428)
(1)
J15 - FLOOR JOIST - W4L07391
1"x2 3/8"x56 1/4" (24x60x1428)
(2)
J16 - FLOOR JOIST - W4L07390
1"x2 3/8"x81 7/8" (24x60x2079)
(1)
J17 - PORCH BASE - W4L07438
2 1/4"x1"x29 1/8" (57x24x740)
(2)
K1 - STAIR STEP - W4L07415
5/8"x5 1/4"x18 1/8" (16x134x460)
(1)
K2 - STAIR STEP - W4L07418
5/8"x5"x18 1/8" (16x128x460)
(2)
K3 - BAY WINDOW HEADER - W4L07180
5/8”x5 1/4”x47 1/8” (16x134x1198)
Parts Identification
Wood Components
(NOT TO SCALE)
(2)
K4 - WALL BOARD - W4L07426
5/8"x5 1/8"x23" (16x131x583)
(1)
K5 - PORCH BOARD - W4L07440
5/8"x4 3/4"x29 1/8" (16x120x740)
(2)
K6 - STAIR STEP - W4L07423
5/8"x5 1/4"x17 1/8" (16x134x435)
(1)
L1 - BENCH SEAT - W4L07467
5/8"x4 3/8"x36" (16x110x914)
(1)
L2 - BENCH SEAT - W4L07468
5/8"x3 7/8"x36" (16x100x914)
(2)
L3 - BENCH UPRIGHT - W4L07469
5/8"x3 7/8"x8 3/8" (16x100x213)
(3)
M1 - HALF MOON - W4L07184
5/8"x3 1/8"x6 3/4" (16x80x170)
(4)
M2 - WALL RAIL - W4L07406
5/8"x3 3/8"x41" (16x86x1041)
(2)
M3 - PORCH TRIM BOARD - W4L07195
5/8"x2 3/4"x3 1/4" (16x70x82)
(2)
M4 - PORCH TRIM BOARD - W4L07196
5/8"x3 3/8"x2 1/2" (16x86x65)
Parts Identification
Wood Components
(NOT TO SCALE)
(2)
M5 - PORCH TRIM BOARD - W4L07197
5/8"x3 3/8"x2" (16x86x50)
(2)
M6 - PORCH TRIM BOARD - W4L07198
5/8"x2 3/4"x2 5/8" (16x70x66)
(2)
M7 - TRIM BOARD - W4L07428
5/8"x3 3/8"x23" (16x86x583)
(1)
M8 - TRIM BOARD - W4L07429
5/8"x3 3/8"x52 5/8" (16x86x1336)
(1)
M9 - FILLER BOARD - W4L07430
5/8"x3 3/8"x49" (16x86x1246)
(1)
M10 - CABINET TOP - W4L07431
5/8"x3 3/8"x58 1/8" (16x86x1476)
(1)
M11 - CABINET TOP - W4L07432
5/8"x3 3/8"x58 1/8" (16x86x1476)
(3)
M12 - PORCH BOARD - W4L07441
5/8"x3 3/8"x29 1/8" (16x86x740)
(2)
M13 - UPPER HANDRAIL - W4L07425
5/8"x3 3/8"x26 1/8" (16x86x665)
(5)
M14 - STAIR STEP - W4L07422
5/8"x3 3/8"x17 1/8" (16x86x435)
(9)
M15 - STAIR STEP - W4L07414
5/8"x3 3/8"x18 1/8" (16x86x460)
Parts Identification
Wood Components
(NOT TO SCALE)
(2)
M16 - LOWER HANDRAIL - W4L07419
5/8"x3 3/8"x33 7/8" (16x86x862)
(1)
M17 - HEADER BOARD - W4L07447
5/8"x3 3/8"x28 1/2" (16x86x724)
(1)
M18 - HEADER BOARD - W4L07448
5/8"x3 3/8"x17 1/4" (16x86x439)
(1)
M19 - HEADER BOARD - W4L07449
5/8"x3 3/8"x17 1/4" (16x86x439)
(2)
M20 - FASCIA BOARD - W4L07453
5/8"x3 3/8"x24 5/8" (16x86x627)
(4)
M21 - HEADER BOARD - W4L07454
5/8"x3 3/8"x14 7/8" (16x86x379)
(2)
M22 - HEADER BOARD - W4L07455
5/8"x3 3/8"x92" (16x86x2337)
(4)
M23 - HEADER BOARD - W4L07456
5/8"x3 3/8"x61" (16x86x1548)
(4)
M24 - FASCIA BOARD - W4L07461
5/8"x3 3/8"x46 1/4" (16x86x1174)
(4)
M25 - FASCIA BOARD - W4L07462
5/8"x3 3/8"x53 5/8" (16x86x1362)
(2)
M26 - BENCH UPRIGHT - W4L07470
5/8"x3 3/8"x8 3/8" (16x86x213)
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
M27 - BENCH GROUND BOARD - W4L07472
5/8"x3 3/8"x34 1/4" (16x86x870)
(1)
M28 - VERTICAL TRIM BOARD - W4L07397
5/8"x3 3/8"x45 3/4" (16x86x1161)
(1)
N1 - SEAM BOARD - W4L07394
5/8"x2 3/8"x47 1/2" (16x60x1205)
(2)
N2 - WINDOW SHELF - W4L07434
5/8"x2 3/8"x15 3/8" (16x60x389)
(1)
N3 - WINDOW SHELF - W4L07435
5/8"x2 3/8"x18 5/8" (16x60x474)
(6)
N4 - PICKET - W4L07201
5/8"x2 3/8"x18 1/4" (16x60x463)
(1)
N5 - SUNBURST LEG - W4L07451
5/8"x2 3/8"x8" (16x60x203)
(2)
N6 - SUNBURST LEG - W4L07452
5/8"x2 3/8"x5 3/4" (16x60x145)
(2)
N7 - SUNBURST LEG - W4L07459
5/8"x2 3/8"x13 3/4" (16x60x350)
(4)
N8 - SUNBURST LEG - W4L07460
5/8"x2 3/8"x9 1/4" (16x60x234)
(22)
N9 - TIE STRAP - W4L07221
5/8”x2”x3 1/8” (16x50x80)
(2)
N11 - SNOW LOAD BOARD - W4L07473
5/8"x2 3/8"x34 7/8" (16x60x885)
Parts Identification
Wood Components
(NOT TO SCALE)
(4)
N10 - PORCH RAIL - W4L07445
5/8"x2 3/8"x17 1/4" (16x60x439)
(1)
O1 - FILLER BOARD - W4L07395
5/8"x1 1/8"x45 5/8" (16x30x1160)
(20)
O2 - PICKET - W4L07408
5/8"x1 3/8"x24 1/4" (16x34x617)
(11)
O3 - BALUSTER - W4L07420
5/8"x1 3/8"x35 3/8" (16x34x900)
(2)
O4 - TRIM BOARD - W4L07463
5/8"x1 3/8"x60 5/8" (16x34x1540)
(4)
O5 - TRIM BOARD - W4L07464
5/8"x1 3/8"x61 5/8" (16x34x1564)
(2)
O6 - TRIM BOARD - W4L07465
5/8"x1 3/8"x17 7/8" (16x34x455)
(1)
O7 - TRIM BOARD - W4L07466
5/8"x1 3/8"x29 3/4" (16x34x756)
(1)
P1 - CORNER BOARD - W4L07396
1 3/8"x1 3/8"x45 5/8" (36x36x1160)
(1)
S1 - PORCH BASE - W4L07436
1"x1"x29 1/8" (24x24x740)
(2)
S2 - PORCH BASE - W4L07437
1"x1"x15 5/8" (24x24x398)
(1)
S4 - PORCH BASE - W4L07439
1"x1"x15 5/8" (24x24x397)
(2)
S5 - PORCH BOARD - W4L07446
1"x1"x17 3/4" (24x24x450)
(4)
T1 - BENCH SUPPORT - W4L07471
1"x1 3/8"x7 3/8" (24x34x186)
Parts Identification
Wood Components
(NOT TO SCALE)
(1)
Y1 - STAIR STEP - W4L07424
5/8"x4"x17 1/8" (16x102x435)
(1)
Y2 - PORCH BOARD - W4L07442
5/8"x4"x29 1/8" (16x101x740)
(3) FP1 - FLOOR PANEL - W2A02047
1 1/4"x20 1/2"x58 1/8" (32x516x1476)
(2) FP2 - FLOOR PANEL - W2A02048
1 1/4"x20 1/2"x58 1/8" (32x523x1476)
(1) FP3 - FLOOR PANEL - W2A02049
1 1/4"x20 1/2"x58 1/8" (32x523x1476)
Parts Identification
Wood Components
(NOT TO SCALE)
(1) WP1 - FRONT RIGHT WALL PANEL - W2A02050
1 7/8"x41 1/8"x89 1/2" (48x1043x2273)
(1) WP2 - FRONT CENTER WALL PANEL - W2A02051
1 1/4"x45 1/2"x89 1/2" (32x1155x2273)
(1) WP3 - FRONT LEFT WALL PANEL - W2A02052
1 7/8"x41 1/8"x89 1/2" (48x1043x2273)
(1) WP4 - LEFT SIDE FRONT PANEL - W2A02053
1 1/4"x31 1/8"x89 1/2" (32x792x2273)
Parts Identification
Wood Components
(NOT TO SCALE)
(1) WP5 - LEFT SIDE REAR PANEL - W2A02054
1 7/8"x31 1/8"x89 1/2" (48x789x2273)
(1) WP6 - REAR LEFT WALL PANEL - W2A02055
1 7/8"x41 1/8"x89 1/2" (48x1044x2273)
(1) WP7 - REAR CENTER WALL PANEL - W2A02056
1 1/4"x45 1/2"x89 1/2" (32x1155x2273)
(1) WP8 - REAR RIGHT WALL PANEL - W2A02057
1 7/8"x41 1/8"x43 3/4" (48x1043x1112)
Parts Identification
Wood Components
(NOT TO SCALE)
(1) WP9 - RIGHT SIDE REAR PANEL - W2A02058
1 1/4"x31 1/8"x66 1/2" (32x792x1690)
(1) WP10 - RIGHT SIDE FRONT PANEL - W2A02059
1 7/8"x31 1/8"x66 1/2" (48x789x1690)
(2) GP1 - GABLE END ASSEMBLY - W2A02061
1 1/4"x60 5/8"x30 3/8" (32x1540x770)
(1) DP1 - FRONT DOOR PANEL - W2A02060
1 1/8"x16 1/2"x43 7/8" (27x465x1124)
(1) GP2 - GABLE END ASSEMBLY - W2A02062
1 1/4"x28 3/8"x14 1/4" (32x721x361)
(4) RP1 - ROOF PANEL - W2A02063
1 5/8"x44"x45 7/8" (42x1118x1164)
(2) RP2 - CENTER ROOF PANEL - W2A02064
1 5/8"x43 1/2"x53 3/8" (42x1102x1354)
Parts Identification
Wood Components
(NOT TO SCALE)
(2) SP1 - SOFFIT PANEL - W2A02065
1 1/8"x36 3/4"x7 7/8" (28x932x199)
(1) SF1 - STEP FRONT PANEL - W2A02072
1 1/2"x18 1/8"x10 1/2" (36x460x268)
(1) RP3 - LEFT PORCH ROOF PANEL - W2A02068
1 5/8"x19 7/8"x23 7/8" (42x506x605)
(1) RP4 - RIGHT PORCH ROOF PANEL - W2A02069
1 5/8"x19 7/8"x23 7/8" (42x506x605)
(2) FP4 - FLOOR PANEL - W2A02071
1 1/4"x20 1/2"x58 1/8" (32x523x1476)
(1) FP5 - FLOOR PANEL - W2A02073
1 1/4"x17 1/8"x18 1/8" (32x435x460)
(2) SR1 - STAIR STRINGER ASSEMBLY - W2A02074
1"x8 5/8"x31 5/8" (24x220x802)
(1) SR2 - STAIR STRINGER ASSEMBLY - W2A02075
1"x8 5/8"x24 1/4" (24x220x617)
(1) SF2 - STEP FRONT PANEL - W2A02076
1 1/2"x17 1/8"x10 1/2" (36x435x268)
(1) SR3 - STAIR STRINGER ASSEMBLY - W2A02077
1"x8 5/8"x24 1/4" (24x220x617)
(1) TP1 - TABLE PANEL - W2A02078
1 1/8"x6 3/4"x30" (27x172x763)
Parts Identification
Accessories
(NOT TO SCALE)
(2) PLASTIC WINDOW 44x266x329 - A100320 (1) PHONE KIT - A100132
(6) PLASTIC WINDOW 44x412x485 - A100321
(1) BYD ID TAG (LARGE) 2011 AGES 2-10 - A100277
(3) BAY WINDOW PANEL - A100373
(1) ARCHED WINDOW - A6P00174
(2) SPRING HINGE - BYD GREEN - A4M00591
(1) "A" REVISION TAG - A100314
(37) 90° L-BRACKET - BLK - A4M00555
(1) HAND GRIP GREEN PLASTIC - A100028
Parts Identification
Accessories
(NOT TO SCALE)
APPLE
ORANGE
WATERMELON
CORN
PLASTIC KNIFE
STRAWBERRY
CARROT
CUTTING BOARD
(1) FRUIT BASKET KIT - A6P00069
(1)
O1 - FILLER BOARD - W4L07395
5/8"x1 1/8"x45 5/8" (16x30x1160)
STEP 7:
FRONT
O1
LEFT
SCREW PFH 8x1 1/8
(9 PLCS)
REAR
(9)
SCREW PFH
8x1 1/8
FLUSH
(1) 90° L-BRACKET - BLK - A4M00555
(1) LEFT BALCONY FLOOR BASE
STEP 12:
WASHER LOCK EXT 8x15
(1 PLC)
NUT BARREL WH 1/4x7/8
(1 PLC)
BOLT WH 1/4x2
(1 PLC)
BOLT WH 1/4x2
(1 PLC)
90° L-BRACKET - BLK
(1 PLC)
(2)
NUT BARREL
WH 1/4x7/8
(5)
(2)
BOLT WH
1/4x2-1/4
BOLT WH
1/4x2
(5)
WASHER
LOCK EXT
6x15
(2)
WASHER
LOCK EXT
8x15
NUT BARREL WH 1/4x7/8
(1 PLC)
WASHER LOCK EXT 8x15
(1 PLC)
RIGHT
REAR
FRONT
BOLT WH 1/4x2-1/4
(5 PLCS)
WASHER LOCK EXT 6x15
(5 PLCS)
T W
P E R S O N F T
(2)
M2 - WALL RAIL - W4L07406
5/8"x3 3/8"x41" (16x86x1041)
STEP 15:
WASHER LOCK EXT 6x15
(2 PLCS)
90° L-BRACKET - BLK
(1 PLC)
NUT BARREL WH 1/4x7/8
(1 PLC)
WASHER LOCK EXT 8x15
(1 PLC)
LAG SCREW WH 1/4x1-1/2
(2 PLCS)
M2
(1) 90° L-BRACKET - BLK - A4M00555
(1)
BOLT WH
1/4x1
(2)
LAG SCREW
WH 1/4x1-1/2
SCREW PWH 8x5/8 BLK
(1 PLCS)
BOLT WH 1/4x1-1/4
(1 PLC)
(1)
BOLT WH
1/4x1-1/4
(3)
WASHER
LOCK EXT
6x15
(2)
WASHER
LOCK EXT
8x15
(2)
NUT BARREL
WH 1/4x7/8
(1)
SCREW PWH
8x5/8 BLK
BOLT WH 1/4x1
(1 PLC)
WASHER LOCK EXT 6x15
(1 PLC)
WASHER LOCK EXT 8x15
(1 PLC)
NUT BARREL WH 1/4x7/8
(1 PLC)
STEP 19:
WP9
WP10
(1) WP9 - RIGHT SIDE REAR PANEL - W2A02058
1 7/8"x31 1/8"x66 1/2" (48x789x1690)
FRONT
(13)
SCREW PFH
8x1 1/4
RIGHT
INTERLOCK DETAIL
WP9
SCREW PFH 8x1 1/4
(13 PLCS)
REAR
STEP 20:
(1) ARCHED WINDOW - A6P00174
SCREW PWH 8x1-1/4
(7 PLCS)
FRONT
(7)
SCREW PWH
8x1-1/4
STEP 22:
REAR
(1)
N1 - SEAM BOARD - W4L07394
5/8"x2 3/8"x47 1/2" (16x60x1205)
(10)
SCREW PFH
8x1 1/8
FRONT
RIGHT
SCREW PFH 8x1 1/8
(10 PLCS)
N1
FLUSH
BOTTOM
STEP 23:
(1)
P1 - CORNER BOARD - W4L07396
1 3/8"x1 3/8"x45 5/8" (36x36x1160)
(9)
SCREW PFH
8x2
RIGHT
FLUSH
SCREW PFH 8x2
(9 PLCS)
P1
BOTTOM
REAR
STEP 27:
(1) FP1 - FLOOR PANEL - W2A02047
1 1/4"x20 1/2"x58 1/8" (32x516x1476)
(1) FP4 - FLOOR PANEL - W2A02071
1 1/4"x20 1/2"x58 1/8" (32x523x1476)
(4)
(46)
SCREW PFH
8x1 1/2
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(4 PLCS)
SCREW PFH 8x1 1/2
(24 PLCS)
FP1
SCREW PFH 8x1 1/2
(22 PLCS)
FP4
STEP 34:
(6)
M15 - STAIR STEP - W4L07414
5/8"x3 3/8"x18 1/8" (16x86x460)
FRONT
M15
M15
RIGHT
(12)
SCREW PFH
8x1 1/2
M15
SCREW PFH 8x1 1/2
(12 PLCS)
(3)
M15 - STAIR STEP - W4L07414
5/8"x3 3/8"x18 1/8" (16x86x460)
(2)
K1 - STAIR STEP - W4L07415
5/8"x5 1/4"x18 1/8" (16x134x460)
(1)
K2 - STAIR STEP - W4L07418
5/8"x5"x18 1/8" (16x128x460)
STEP 35:
SCREW PFH 8x1 1/2
(18 PLCS)
(18)
SCREW PFH
8x1 1/2
M15
K2
M15
K1
M15
K1
STEP 41:
(1) FP5 - FLOOR PANEL - W2A02073
1 1/4"x17 1/8"x18 1/8" (32x435x460)
(20)
SCREW PFH
8x1 1/2
FRONT
SCREW PFH 8x1 1/2
(20 PLCS)
FP5
STEP 42:
FRONT
(4)
M14 - STAIR STEP - W4L07422
5/8"x3 3/8"x17 1/8" (16x86x435)
REAR
M14
(8)
SCREW PFH
8x1 1/2
RIGHT
SCREW PFH 8x1 1/2
(8 PLCS)
M14
(1)
Y1 - STAIR STEP - W4L07424
5/8"x4"x17 1/8" (16x102x435)
(1)
M14 - STAIR STEP - W4L07422
5/8"x3 3/8"x17 1/8" (16x86x435)
(2)
K6 - STAIR STEP - W4L07423
5/8"x5 1/4"x17 1/8" (16x134x435)
STEP 43:
REAR
(12)
SCREW PFH
8x1 1/2
SCREW PFH 8x1 1/2
(12 PLCS)
FRONT
RIGHT
Y1
K6
M14
K6
STEP 45:
(1)
M13 - UPPER HANDRAIL - W4L07425
5/8"x3 3/8"x26 1/8" (16x86x665)
M13
(2)
LAG SCREW
WH 1/4x1-1/2
(2)
WASHER
LOCK EXT
6x15
LAG SCREW WH 1/4x1-1/2
(1 PLC)
WASHER LOCK EXT 6x15
(1 PLC)
LAG SCREW WH 1/4x1-1/2
(1 PLC)
WASHER LOCK EXT 6x15
(1 PLC)
STEP 51:
SCREW PFH 8x1 1/4
(4 PLCS)
(1) BAY WINDOW ASSEMBLY
T W O
P E R S O F T
(4)
SCREW PFH
8x1 1/4
RIGHT
BAY WINDOW ASSEMBLY
REAR FRONT
STEP 52:
M8
(1)
M8 - TRIM BOARD - W4L07429
5/8"x3 3/8"x52 5/8" (16x86x1336)
(1)
M9 - FILLER BOARD - W4L07430
5/8"x3 3/8"x49" (16x86x1246)
M9
SCREW PFH 8x1 1/8
(3 PLCS)
CENTER 'M9' BOARD ON 'M8' BOARD AND SECURE AS SHOWN.
FILLER BOARD ASSEMBLY
(4)
SCREW PFH
8x1 1/4
(5)
SCREW PFH
8x1 1/8
SCREW PFH 8x1 1/8
(2 PLCS)
SCREW PFH 8x1 1/4
(4 PLCS)
(2) PLASTIC WINDOW 44x412x485 - A100321
STEP 54:
PLASTIC WINDOW 44x412x485
(2 PLCS)
(12)
SCREW PFH
8x1
FRONT
SCREW PFH 8x1
(12 PLCS)
REAR
STEP 55:
PLASTIC WINDOW 44x412x485
(2 PLCS)
(2) PLASTIC WINDOW 44x412x485 - A100321
(12)
SCREW PFH
8x1
SCREW PFH 8x1
(12 PLCS)
STEP 57:
(2) PLASTIC WINDOW 44x412x485 - A100321
SCREW PFH 8x1
(12 PLCS)
PLASTIC WINDOW 44x412x485
(2 PLCS)
(12)
SCREW PFH
8x1
STEP 58:
(2)
G2 - WALL SUPPORT - W4L07433
1"x5 1/4"x6 3/4" (24x134x170)
G2
(4)
SCREW PFH
8x2
FLUSH
SCREW PFH 8x2
(4 PLCS)
STEP 59:
(1) TP1 - TABLE PANEL - W2A02078
1 1/8"x6 3/4"x30" (27x172x763)
(4)
SCREW PFH
8x1 1/4
SCREW PFH 8x1 1/4
(4 PLCS)
TP1
(2)
M22 - HEADER BOARD - W4L07455
5/8"x3 3/8"x92" (16x86x2337)
(4)
M21 - HEADER BOARD - W4L07454
5/8"x3 3/8"x14 7/8" (16x86x379) (4)
M23 - HEADER BOARD - W4L07456
5/8"x3 3/8"x61" (16x86x1548)
STEP 60:
ASSEMBLE (2) LONG HEADER ASSEMBLIES
IN THIS STEP.
(20)
SCREW PFH
8x1 1/8
OUTSIDE SURFACE
M23
M21
SCREW PFH 8x1 1/8
(2 PLCS)
SCREW PFH 8x1 1/8
(8 PLCS)
M22
INSIDE SURFACE
M23
M21
(2)
F1 - HEADER BOARD - W4L07457
1 1/4"x3 3/8"x58 1/8" (32x86x1476)
(6)
N9 - TIE STRAP - W4L07221
5/8”x2”x3 1/8” (16x50x80)
STEP 62:
INSTALL HEADER THE SAME TO LEFT AND RIGHT
SIDES OF THE PLAYHOUSE.
N9
SCREW PFH 8x1 1/4
(24 PLCS)
N9
(24)
SCREW PFH
8x1 1/4
(8)
SCREW PFH
8x2
F1
N9 SCREW PFH 8x2
(8 PLCS)
F1
STEP 71:
(1)
S1 - PORCH BASE - W4L07436
1"x1"x29 1/8" (24x24x740) (1)
J17 - PORCH BASE - W4L07438
2 1/4"x1"x29 1/8" (57x24x740)
(2)
S2 - PORCH BASE - W4L07437
1"x1"x15 5/8" (24x24x398)
(1)
S4 - PORCH BASE - W4L07439
1"x1"x15 5/8" (24x24x397)
S1
S2
S4
(5)
SCREW PFH
8x1 3/4
(1)
SCREW PFH
8x3
SCREW PFH 8x1 3/4
(5 PLCS)
J17
SCREW PFH 8x3
(1 PLC)
S2
(2)
M4 - PORCH TRIM BOARD - W4L07196
5/8"x3 3/8"x2 1/2" (16x86x65)
(2)
M3 - PORCH TRIM BOARD - W4L07195
5/8"x2 3/4"x3 1/4" (16x70x82)
STEP 75:
M5
M6
(2)
M5 - PORCH TRIM BOARD - W4L07197
5/8"x3 3/8"x2" (16x86x50)
(2)
M6 - PORCH TRIM BOARD - W4L07198
5/8"x2 3/4"x2 5/8" (16x70x66)
(8)
SCREW PFH
8x1 1/4
M4
M3
SCREW PFH 8x1 1/4
(8 PLCS)
M3
M6
M4 M5
STEP 88:
J7
(2)
J7 - PORCH CORBEL - W4L07230
1"x2 3/8"x9" (24x60x230)
SCREW PFH 8x1 1/2
(2 PLCS)
LAG SCREW WH 1/4x1-1/2
(2 PLCS)
WASHER LOCK EXT 6x15
(2 PLCS)
(2)
LAG SCREW
WH 1/4x1-1/2
(2)
SCREW PFH
8x1 1/2
(2)
WASHER
LOCK EXT
6x15
J7
STEP 89:
(2)
N2 - WINDOW SHELF - W4L07434
5/8"x2 3/8"x15 3/8" (16x60x389)
(1)
N3 - WINDOW SHELF - W4L07435
5/8"x2 3/8"x18 5/8" (16x60x474)
(9)
SCREW PFH
8x1 1/4
REAR
SCREW PFH 8x1 1/4
(3 PLCS)
N2
LEFT
SCREW PFH 8x1 1/4
(6 PLCS)
N3
N2
STEP 90:
SCREW PFH 8x1 1/2
(2 PLCS)
(1) FAUCET KIT - A6P00024
(2)
SCREW PFH
8x1 1/2
FAUCET KIT
STEP 91:
SCREW PWH 8x5/8
(2 PLCS)
(1) SURFACE MOUNT BASIN - A6P00032
(2)
SCREW PWH
8x5/8
SURFACE MOUNT BASIN
STEP 92:
(1) STOVE KIT - A6P00025
SCREW PFH 8x1 1/8
(4 PLCS)
STOVE KIT
(4)
SCREW PFH
8x1 1/8
STEP 93:
(1) FRUIT BASKET KIT - A6P00069
SCREW PFH 8x1/2
(4 PLCS)
(4)
SCREW PFH
8x1/2
FRUIT BASKET KIT
STEP 94:
(1) PHONE KIT - A100132
PHONE KIT
SCREW PFH 8x1/2
(2 PLCS)
(2)
SCREW PFH
8x1/2
100 mm
[3 7/8 in]
STEP 95:
(3) RIDGE CAP - A6P00175
RIDGE CAP
(3 PLCS)
SCREW PFH 8x1/2
(18 PLCS)
(18)
SCREW PFH
8x1/2
TRIM OFF ANY
OVERLAP OF
THE RIDGE CAP
MATERIAL.
STEP 97:
(2)
O6 - TRIM BOARD - W4L07465
5/8"x1 3/8"x17 7/8" (16x34x455)
(1)
O7 - TRIM BOARD - W4L07466
5/8"x1 3/8"x29 3/4" (16x34x756)
(9)
SCREW PFH
8x1 1/8
O6 O6
O7
SCREW PFH 8x1 1/8
(9 PLCS)
STEP 101:
(1) BYD ID TAG (LARGE) 2011 AGES 2-10 - A100277
(4)
SCREW PFH
8x1/2
BYD ID TAG (LARGE) 2011 AGES 2-10
SCREW PFH 8x1/2
(4 PLCS)
Limited Warranty
This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products.
Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories. All wood carries a five (5) year pro-rated warranty against rot and decay. Refer to the schedule below for charges associated with replacement of parts under this Limited Warranty. In addition, Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging.
This warranty applies to the original owner and registrant and is nontransferable . Regular maintenance is required to assure maximum life and performance of this product and failure by the owner to maintain the product according to the maintenance requirements may void this warranty. Maintenance guidelines are provided in the Owner’s Manual.
This Limited Warranty does not cover:
•
Labor for any inspection
•
Labor for replacement of any defective item(s)
•
Incidental or consequential damages
•
Cosmetic defects which do not affect performance or integrity of a part or the entire product
•
Vandalism, improper use, failure due to loading or use beyond the capacities stated in the applicable Assembly Manual.
•
Acts of nature including but not limited to wind, storms, hail, floods, excessive water exposure
•
Improper installation including but not limited to installation on uneven, unlevel, or soft ground
•
Minor twisting, warping, checking, or any other natural occurring properties of wood that do not affect performance or integrity
Backyard Discovery products have been designed for safety and quality. Any modifications made to the original product could damage the structural integrity of the unit leading to failure and possible injury. Modification voids any and all warranties and Backyard Discovery assumes no liability for any modified products or consequences resulting from failure of a modified product.
This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a Backyard Discovery product be used in public settings. Such use may lead to product failure and potential injury. Any and all public use will void this
warranty. Backyard Discovery disclaims all other representations and warranties of any kind, express or implied.
This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to province. This warranty excludes all consequential damages, however, some states do not allow the limitation or exclusion of consequential damages and therefore this limitation may not apply to you.
Pro Rated Part Replacement Schedule
Product Age
All Parts
0-30 days from date of purchase
31 days to 1 year
Customer Pays
$0 and free shipping
$0 + S&H
Wood Rot and Decay Only
1 year
2 years
3 years
4 years
5 years
Over 5 years
Rev 11/22/10 BRS
$0 and free shipping
20% + S&H
40% + S&H
60% + S&H
80% + S&H
100% + S&H
Public link updated
The public link to your chat has been updated.
Advertisement