Operating Guide
TCH7090ER - TCH7090ERL
Register this product online and receive a free trial issue of
Cook's Illustrated. Visit ww.delonghiregistration.com.
Visit www.delonghi.com for a list of service centers near you.
(U.S. Only)
Enregistrez ce produit en ligne et recevez un numéro gratuit de
Cook's Illustrated. Visitez www.delonghiregistration.com. Visitez www.delonghi.com pour y voir une liste des centres de
réparation proches de chez vous. (É.-U. uniquement)
Registre este producto en línea y reciba un ejemplar gratis de
Cook's Illustrated. Visite www.delonghiregistration.com. Visite www.delonghi.com para ver la lista de centros de servicios
cercanos a usted. (Solamente en los Estados Unidos)
120 V~ 60 Hz 1 500 W
A ON/OFF button
B +/- Adjustment buttons
C Oscillation button
D “ECO” function button
E Timer button
F MODE button
(for selecting the operating
G Receiver for remote control
H Power indicator light
I Back cover
J Filter
A Touche ON/OFF
B Touches de réglage +/C Touche d’oscillation
D Touche «ECO »
E Touche minuterie
F Touche MODE (sélection du
mode de fonctionnement)
G Récepteur de la télécommande
H Lampe témoin
I Couvercle arrière
J Filtre
Fig. 1
A Botón de Encendido/Apagado
B Botones de ajuste +/C Botón de oscilación
D Botón de función “ECO”
E Botón de temporizador
F Botón MODE (MODO – para
seleccionar el modo de
G Receptor del control remoto
H Luz indicadora de encendido
I Cubierta posterior
J Filtro
When using any electrical appliance, some
basic safety precautions should always be
observed to reduce the risk of fire, electric
shock, and/or injury to persons. Specifically:
1. Read all instructions carefully before
using the appliance.
2. This appliance gets very hot when in
use. To prevent burns, do not touch
hot surfaces with bare skin. Use the
handle when moving the appliance.
Keep all flammable materials, such as
furniture, pillows, bedding, paper,
clothing, and curtains at least 3 feet
(90 cm) from the front and top of the
appliance also avoid contact with the
sides and back.
3. The appliance is not intended for use by
persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety. Children
should be supervised to ensure that
they do not play with the appliance.
4. Always disconnect the plug from the
power outlet when the appliance is not
in use.
5. Do not operate the appliance with a
damaged cord or plug, after faulty operation, or when it has been dropped or
damaged in any way. Contact the nearest authorized service facility for examination, electrical or mechanical adjustment, or repair.
6. Do not use the appliance outdoors.
7. This heater is not intended for use in
bathrooms, laundry areas, or similar
indoor locations. Never position the
appliance where it may fall into a bathtub or come in contact with water.
8. Do not run the power cord under carpeting. Do not cover cord with throw rugs,
runners, or the like. Keep the cord away
from any passageways where it could be
tripped over.
9. To completely turn off the appliance,
push the ON/OFF button (A), and then
unplug the heater.
10.Do not wrap the cord around the
appliance immediately after use.
11.Do not insert or allow foreign objects
to get into the air intake or air outlet
grille, as this may cause electric shock
or fire, or damage the appliance.
12.To prevent a possible fire, do not block
air intake or air outlet grille in any
way. Do not use the appliance on soft
surfaces, such as beds, where the
openings may become blocked.
13.Do not cover the appliance while it is
functioning in order to avoid overheating and the risk of fire.
14 The internal parts of the appliance can
become very hot or produce sparks
during operation. Do not use the
appliance in areas where gasoline,
paints, or other flammable liquids are
used or stored.
15.Use this appliance only as described in
this manual. Any other use not indicated
by the manufacturer may cause fire,
electric shock, or injury to persons.
16.To prevent current overload and blown
fuses, make sure that no other appliance is
plugged into the same outlet or into
another outlet wired into the same circuit.
17.It is normal for heater’s plug and cord to
feel warm to the touch. However, an
excessively hot or deformed plug or
cord is not normal and may be the
result of a defective electrical outlet.
Defective outlets must be replaced
before using the heater. Plugging the
heater into a worn outlet may result in
overheating of the power cord or may
cause the risk of fire.
18.If the supply cord is damaged, to reduce
the risk of malfunction it must be replaced by the manufacturer, its service
agent, or a licensed and qualified professional.
19. Do not use this appliance with an
extension cord or outlet strip. Connect
the appliance directly to a suitable
20. Make sure that the plug is fully inserted
into the outlet. Wall outlets may deteriorate with time, so check the plug periodically for signs of overheating or deformation. If the outlet has deteriorated,
stop using it and have it repaired.
21.Check that neither the appliance nor
the power cord have been damaged
during shipping.
22.Make sure that no styrofoam or other
packing materials remain in the appliance.
23.The first time the appliance is used, run
it at the maximum power for at least
two hours. During this time, ventilate
the room thoroughly to eliminate the
“new” smell released by the appliance.
It is completely normal for the appliance to emit “creaking” sounds the first
time it is run.
24. CAUTION: To prevent electric shock,
make sure the wide prong of the plug is
inserted in the wide slot of the outlet.
25.Do not place the heater near a bed
because objects such as pillows or
blankets can fall off the bed and be
ignited by the heater.
26.Extreme caution is necessary whenever
the heater is left operating unattended.
27.Do not open the appliance. No userserviceable parts inside.
For Household use only
Before connecting the plug to the power
outlet, make sure that the voltage of your
electrical system corresponds to the voltage shown on the appliance rating label
and the outlet you are going to use is in
good condition.
The appliance may be used on any rigid
horizontal surface. Do not overload the
electrical circuit; avoid using the same
outlet for multiple appliances.
1. Connect the appliance to the power
2. The appliance emits a beep and the
power indicator light (H) comes on
and remains on as long as the
appliance is powered.
3. The appliance goes into OFF.
If the display shows a blinking dot, it
means that the tip over switch has
been activated. See paragraph:
“Additional safety features” page 6.
4. Press the ON/OFF button (A) to turn
on the appliance. It will begin to heat
with the predefined settings.
5. Press the MODE button (F) to select
one of the following functions available:
Ventilation (
Anti-freeze (
Heating at minimum power
( 1 )
Heating at maximum power/BOOST
function (2)
5.1 Ventilation ( )
In this operating mode only the
fan operates, so the appliance
does not heat the room.
5.2 Anti-freeze ( )
In this operating mode the
appliance keeps the room at a
temperature of 45°F (7°C) to prevent freezing temperatures.
5.3 Heating 1 and Heating 2
In this operating mode you can set
the desired temperature by pressing the + and - adjustment buttons (B).
Heating 1 (minimum power
The appliance operates at the
minimum power, reducing noise
and energy consumption to the
Heating 2/BOOST function (maximum power level):
The appliance operates at the
maximum power for rapid heating
of the room.
6. Eco function
In this operating mode the appliance
will automatically set the power level
to guarantee the best comfort reducing the energy consumption. In this
operating mode the unit may switch
the heating power level from maximum to minimum and viceversa,
several times in an hour. When using
the ECO function, the maximum temperature setting is 79°F (26°C). To
activate this function, press the ECO
button (D).
7. If you want the appliance to distribute
the airflow over a larger area, press
the oscillation button (C) (
). The
appliance will then oscillate right and
left. To stop the oscillation in the
desired position, just press oscillation
button (C) again.
8. To turn off the appliance press button
ON/OFF (A). The display will show a
count down for about 6 seconds.
NOTE: The display can show the temperature in both °F and °C. To change the temperature scale, press and hold the + key for
few seconds, then release.
Please be informed that as this is not a precision device, the showed temperature not
necessary corresponds to the real one.
This function can be activated from any
operating mode.
Delayed switch-on: with the appliance in
the OFF position, press the timer button
(E) ( ).
The display shows the symbol
the time remaining before switch-on.
To set the timer, use the + and - adjustment buttons (B), then wait a few
seconds for the programming to be set.
The display shows the symbol
indicate you have set the timer. When
the programmed time has been reached, the appliance turns on with the
same settings it had during the previous operation.
Delayed shut-off: with the appliance on,
press the timer button (E) (
). The
display shows the symbol
and the
time remaining before shut-off.
To set the timer, use the + and - adjust-
ment buttons (B), then wait a few
seconds for the programming to be set.
The display returns to show the current
settings and the symbol
to indicate you have set the timer. When the
programmed time as been reached the
appliance shuts off automatically.
If you want to go back to operation
without the timer, press the timer button (F) twice. The timer symbol
disappears from the display.
- The remote control functions correspond to those on the control panel.
See the section “Operation and Use"
on the previous page for a description
of the functions.
Inserting or replacing the batteries
- Remove the cover on the rear of the
remote control;
- Insert two AAA (R03/1.5V) batteries
(included but packaged separately)
making sure they are in the correct
position (see the instructions inside
the battery compartment);
- Do not mix old and new batteries
- Do not mix alkaline, standard (carbonzinc), or rechargeable (ni-cad, ni-mh,
etc) batteries
- Replace the cover;
- Old batteries must be removed and
disposed of in accordance with current legislation as they are harmful to
the environment.
- Before carrying out any maintenance,
always remove the plug from the
power outlet.
- During the season when the appliance is being used, regularly clean the
air intake and outlet grilles using a
vacuum cleaner.
- Never use abrasive powders or solvents to clean the appliance.
- Remove the back grille by pulling it
outward (Fig. 1).
- Remove the dust filter that filters
impurities from the air taken in from
the room, blow it lightly, then reposition it in the appliance.
- Never use this heating appliance in the
immediate vicinity of a bathtub,
shower, or swimming pool.
- Use the appliance always and only in
the vertical position.
- Do not use the appliance to dry laundry,
and do not obstruct the air intake and
outlet grilles (danger of overheating).
- Do not operate the appliance in contact with walls, furniture, curtains, etc.
- If the power cord is damaged, it must
be replaced by the manufacturer, the
authorized service facility, or a qualified electrician, in order to prevent the
risk of malfunction.
- Do not cover the appliance while it is
operating, as this could potentially
cause a fire.
- Do not use this appliance in a room
smaller than 43 square feet (4 m²).
- Heaters should never be used with an
extension cord or outlet strip. Heaters
should be plugged directly into an outlet.
- Before storing the appliance, check it
is completely off and the cable is
unplugged. At this point wrap the cord
around the base. Do not store in a
dusty room. The room temperature
should be between 32-86°F (0-30°C).
Do not load anything above it.
- Heaters draw more current than small
appliances, overheating of the outlet
may occur even if it has not occured
with the use of other appliances.
Additional safety features
1. Overheating protection: a safety device
switches the heater off if it accidentally
overheats (e.g.: air intake and outlet
grilles obstructed, filter clogged). In this
case remove the plug from the power
outlet and leave it unplugged for a few
minutes, eliminate the cause of
overheating, then plug the fan heater
back and turn it on again.
2. Tip over safety switch: a safety tipover switch turns the heater off if it
tips over or is positioned in an improper way that could jeopardize safety.
The appliance emits a beep and the
display will show a blinking dot. After
the appliance has been restored in the
vertical position it will take just few
seconds to start on again.
Note: To avoid overheating the appliance,
do not cover it.
In case “PF” is displayed and a warning
sound is emitted, there is a fault on the
temperature sensor. If the problem persists contact the Service Center.
If the appliance shuts off unexpectedly:
- Check that the appliance is receiving
- Check that the appliance is in the vertical position and on a flat surface, as
the safety tip-over switch may have
been tripped.
- Check the temperature set and the
timer: the appliance may be off
because the set temperature has
been reached or the time set on the
timer has elapsed.
NOTE: This equipment has been tested
and found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular installation. lf this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to
try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
Modifications not approved by the
party responsible for compliance could
void user’s authority to operate the
This warranty applies to all products with De’Longhi or Kenwood brand names.
What does the warranty cover?
We warrant each appliance to be free from defects in material and workmanship. Our obligation
under this warranty is limited to repair at our factory or authorized service center of any defective
parts or part thereof, other than parts damaged in transit. In the event of a products replacement
or return, the unit must be returned transportation prepaid. The repaired or new model will be
returned at the company expense.
This warranty shall apply only if the appliance is used in accordance with the factory directions,
which accompany it, and on an Alternating current ( AC ) circuit.
How long does the coverage last?
This warranty runs for one year (1) from the purchase date found on your receipt and applies only
to the original purchaser for use.
What is not covered by the warranty?
The warranty does not cover defects or damage of the appliance, which result from repairs or alterations to the appliance outside our factory or authorized service centers, nor shall it apply to any
appliance, which has been subject to abuse, misuse, negligence or accidents. Also, consequential
and incidental damage resulting from the use of this product or arising out of any breach of contract or breach of this warranty are not recoverable under this warranty. Some states do not allow
the exclusion or limitation of incidental or consequential damage, so the above limitation may not
apply to you.
How do you get service?
If repairs become necessary, see contact information below:
U.S. Residents: Please contact our toll free hotline at 1-800-322-3848 or log onto our website at
Residents of Canada: Please contact our toll free hotline at 1-888-335-6644 or log onto our website at www.delonghi.com
Residents of Mexico: Please contact our toll free number 01-800-711-8805 for assistance or log
onto our website at www.delonghi.com
The above warranty is in lieu of all other express warranties and representations. All implied warranties are limited to the applicable warranty period set forth above. This limitation does not apply
if you enter into an extended warranty with De’Longhi. Some states/countries do not allow limitations on how long an implied warranty lasts, so the above exclusions may not apply to you.
De’Longhi does not authorize any other person or company to assume for it any liability in connection with the sale or use of its appliance.
How does country law apply?
This warranty gives you specific legal rights, and you may also have other rights, which vary from
state to state/country to country.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF