M

ULTI-

F

ORCE

THE PREMIUM CYLINDER VACUUM

WITH 13 CYCLONES FOR NO LOSS OF SUCTION

*

USER GUIDE

*Provided the dirt container does not contain dirt past the “Full” line

& all filters are properly maintained (see pages 6 - 10 for details).

Thank you for purchasing a BENNETT READ

MULTI-FORCE vacuum.

Your MULTI-FORCE vacuum incorporates the latest technological advances in home cleaning systems. It imitates the most powerful forces of nature in a sleek, elegant cleaning system to ensure that your home is easily and properly cleaned.

It is manufactured to the highest quality and is backed by a one year guarantee by Tevo. If you register your guarantee online within 14 days of purchase, we will extend the guarantee to 2 years. To activate your extended guarantee, scan the QR code on the front cover of this user guide, tap on the link and complete the online form. Alternatively, visit www.tevo.co.za

, click the “Register guarantee” tab at the top of the page, then complete the form provided. We also stand behind it with a knowledgeable, dedicated Customer Care department, so should you ever have a problem, you'll receive fast, considerate assistance.

Should you need any support from us, please visit: www.tevo.co.za

or call 0861 77 88 88.

PLEASE KEEP THIS USER GUIDE IN A SAFE PLACE AND

READ IT CAREFULLY BEFORE USING YOUR BENNETT READ

MULTI-FORCE VACUUM FOR THE FIRST TIME.

1

IMPORTANT SAFETY INSTRUCTIONS

!

WARNING

TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK, OR INJURY:

BASIC SAFETY PRECAUTIONS

SHOULD BE OBSERVED WHEN

USING YOUR MULTI-FORCE,

INCLUDING THE FOLLOWING:

• Your MULTI-FORCE is for household use only

• Use only indoors on dry surfaces

• Do not immerse any part of the system in

water or any other liquids

• Do not operate the system if the appliance

or any other part of the system has been

dropped or damaged

• Do not disassemble or attempt to repair

your MULTI-FORCE. Return the unit for

examination and repair

• Do not use the vacuum to pick up

flammable or combustible liquids such as

gasoline and do not use it in areas where

they may be present

• Do not use the vacuum to pick up anything

that is burning or smoking such as

cigarettes, matches or hot ashes

• Use extra care when cleaning on stairs

• Do not use your MULTI-FORCE without the filters in place

• Do not leave your MULTI-FORCE plugged in when unattended

• Unplug the electrical cord when not in

use and before cleaning or servicing

• Keep loose clothing, hair & all body parts away from openings & moving parts

• Not intended for use by persons (including

children) with reduced physical, sensory

or mental capabilities, or lack of

experience and knowledge

• Keep out of reach of children

• Do not allow your MULTI-FORCE to be used as a toy

• Extra care is necessary when using your

MULTI-FORCE vacuum near children,

animals or plants

• Do not pull the electrical cord or use the

cord as a handle

• Take care to not close doors on the

electrical cord and do not pull the cord

around sharp edges or corners

• Do not run the vacuum over it’s own

electrical cord

• Do not allow the cord to touch hot surfaces

• Turn off all controls before unplugging

from the electrical outlet

• To unplug your MULTI-FORCE, grasp the

plug. Do not unplug by pulling on the

electrical cord

• Do not handle the plug or vacuum with

wet hands

• Do not operate your MULTI-FORCE while

barefoot

• Do not put any objects into the vacuum

openings

• Do not use your MULTI-FORCE while any

opening is blocked

• Keep your MULTI-FORCE free of dust, lint, hair or anything else which may reduce airflow

• Keep your work area well lit

• Using improper voltage may result in

damage to the motor and possible injury

to the user. The correct voltage is listed

on the rating label. For operation on

220-240V, 50/60Hz power supply only

• Only use the accessories supplied with

your MULTI-FORCE vacuum

• Only use spare parts recommended by

Tevo

• Store your MULTI-FORCE indoors in a cool, dry area

SAVE THESE INSTRUCTIONS

FOR FUTURE USE

FOR HOUSEHOLD USE ONLY

2

17

PRODUCT VIEW

9

21

16

12

20

18

19 3

22

5

13

14

1

10

11

15

2

8

6

4

7

1. Multi-surface floor nozzle

2. Brush switch

3. 2-Piece extension wand

4. Dusting brush/Crevice tool

5. Airflow regulator

6. Handle

7. Hose

8. Carry handle

9. Dirt container release button

10. Hose connector

11. Suction inlet

12. Power button

13. Multi-Cyclonic dirt separator

14. Dirt container

15. Dirt container emptying

catch (at back)

3

16. Auto-cord rewind button

17. Post-motor filter door

18. Post-motor Microparticle filter

19. Power cord and plug

20. Floor nozzle storage slot

21. Dirt container filter (inside lid)

22. Dirt container filter latch

!

CAUTION:

Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.

ASSEMBLY

1.

Connect the hose (7) to the vacuum by

inserting the hose connector (10) into

the suction inlet (11) until it clicks into place

2.

Connect the 2-Piece extension wand by pushing the small end of one piece into the large end of the other piece. Then twist slightly to fasten

3.

Connect the hose handle (6) to the end

of the extension wand and twist slightly

to tighten

4.

Connect the floor nozzle (1) to the other

end of the extension wand and twist

slightly to tighten

5.

Once assembled, you can store your

vacuum by inserting the storage clip

(located on the back of the floor nozzle)

into the storage slot (20) on the rear of

the vacuum

OPERATIONS

POWER CORD

The power cord (19) is located at the rear of the vacuum. Gently pull the power cord out. Stop pulling the cord when the yellow line is visible. There is also a red line which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.

AUTO-CORD REWIND

Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button to switch the vacuum OFF and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the auto cord rewind button to rewind the cord automatically.

3.

4.

1.

2.

!

CAUTION:

The power cord retracts very quickly.

Take care to avoid injury.

AUTO

CORD

REWIND

POWER

BUTTON

POWER BUTTON

Turn the power ON or OFF by pressing lightly downward on the power button.

4

OPERATIONS

SPECIAL TOOLS

Your MULTI-FORCE vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile bare floor and above floor vacuum cleaner when you select one of the special tools.

TIP:

Before cleaning under low furniture, check the area first for objects that might harm the unit or block the hose.

1.

Brush up FLOOR NOZZLE

Use to vacuum carpets, rugs and bare floors. The swivel head turns to get into tight spaces and fits under cabinets

1.

To vacuum carpets and rugs, push the

brush switch to the carpet position

[ ]. This will pull the brushes up

into the floor nozzle

2.

To vacuum bare floors, push the brush

switch to the bare floor position

[ ]. This will extend the brushes

down from the floor nozzle

2.

Brush down

DUSTING BRUSH/CREVICE TOOL

Use the dusting brush to clean blinds, curtains, draperies, cushions and fabrics.

Use the crevice tool in narrow spaces.

Dusting brush/Crevice tool

AIRFLOW REGULATOR

Open the airflow regulator by sliding the regulator down towards the extension wand to an open position. This will reduce the suction power for vacuuming delicate fabrics. For full suction power, close the air-flow regulator by sliding the regulator up to the closed position.

Airflow regulator

5

MAINTENANCE AND CARE

TO MAINTAIN MAXIMUM

PERFORMANCE FROM YOUR

MULTI-FORCE VACUUM,

PERFORM THESE SIMPLE

MAINTENANCE CHECKS:

EMPTYING THE DIRT CONTAINER

Empty the dirt container as soon as the dirt reaches the “FULL” line on the sides of the dirt container.

1.

Unplug the vacuum from the electrical outlet

2.

Remove hose by pressing the release button and pulling the hose connector out from the suction inlet. Set hose aside

3.

Press the dirt container release button (9) and lift up to remove the dirt container

4.

Choose an emptying method (method

#2 is recommended for allergy sufferers).

Method #1 - Hold the dirt container over a rubbish bin and push the emptying button to open the bottom.

Close the bottom after the dirt empties.

Method #2 - Place a plastic bag over the bottom of the dirt container. Push the emptying button through the plastic bag to open the bottom. After the dust settles, close the bottom and remove the plastic bag to discard

5.

Replace the dirt container by sliding it back into the vacuum from the top. Then push down gently on the dirt container until it clicks back into place.

Make sure that the locking clasp is properly fastened.

2.

3.

4.

5.

!

WARNING:

To reduce the risk of injury from moving parts and/or electrical shock, turn the Power Switch

OFF and disconnect the plug from the electrical outlet before performing maintenance checks.

TIP:

Hair, string and small objects can block the hose and tools. Check them occasionally for obstructions.

!

WARNING:

To avoid injury, turn the vacuum OFF and unplug the cord from the wall when not in use.

6

MAINTENANCE OF WASHABLE FILTERS

1.

Remove the dirt container by pressing

the dirt container release button (9) and

lifting up on the handle

1.

TIP:

For maximum cleaning performance, check the filters often and clean or replace if necessary.

2.

2.

Open the lid of the dirt container by lifting the dirt container filter catch

!

CAUTION:

Never operate your MULTI-FORCE vacuum without all the filters in place. Doing so may damage the motor and void the guarantee.

3.

3.

Lift the Dirt Container Filter (21) out from above the Multi-Cyclonic Dirt Separator

(13). Once the filter has been removed, gently wash it in luke-warm water. A mild detergent may be used. Ensure that the filter is well rinsed and COMPLETELY DRY before placing it back into the machine

!

WARNING:

Do not use any appliances such as electric hair dryers, to dry the filters. Filters may only be AIR DRIED.

!

WARNING:

Never operate your MULTI-FORCE vacuum with damp or wet filters.

7

MAINTENANCE OF THE CYCLONIC

DIRT SEPARATOR

1. The Multi-Cyclonic Separator (13) can be removed from the Dirt Container

(14). Follow the diagram ( ) on the Dirt Container to unlock, then pull apart from the Multi-Cyclonic

Separator. Follow the diagram to lock when replacing again.

2. The Separator and Dirt Container can be washed/rinsed under running tap water (Figure 2A and 2B).

ENSURE THAT THE SEPARATOR AND

DIRT CONTAINER ARE COMPLETELY

DRY BEFORE RETURING THEM TO

THE MACHINE

1.

2A.

TIP:

Leave the Separator and Dirt Container outside with top and bottom lid open to speed up the drying process

TIP:

Hair, string and small objects can block the hose and tools. Check the unit occasionally for these obstructions.

TIP:

Before cleaning under low furniture check the area first for objects that might harm the unit or block the hose.

2B.

3.

Reinstall the Dirt Container Filter (21) and reassemble the Multi-Cyclonic

Separator and Dirt Container before inserting back into the machine

!

CAUTION:

Never operate your MULTI-FORCE vacuum without all the filters in place. Doing so may damage the motor and void the guarantee.

8

MAINTENANCE AND CARE

CLEANING THE POST-MOTOR

MICROPARTICLE FILTER

THE POST-MOTOR FILTER ASSISTS IN THE

FILTRATION PROCESS TO RETURN CLEANER

AIR INTO THE ROOM

1.

Unplug the vacuum from the electrical

outlet

2.

Remove the filter door (17) (located at

the back of the vacuum) by removing the filter door

pressing the tab down. Take care when

3.

Remove the post-motor filter from

the filter door

4.

The post-motor filter can be hand

washed in cold water with a mild

detergent. Rinse well and air dry

COMPLETELY before placing back

into the vacuum

5.

Replace the post-motor filter into the filter door. Then replace the assembly into the machine by placing the two tabs on the bottom of the filter door into the notches on the bottom of the post-motor filter compartment and push into the vacuum until it clicks into place.

Ensure that the tabs are properly

inserted into the housing

TIP:

For maximum cleaning performance check the filters often and clean or replace them regularly.

2.

3.

NOTICE:

This product is intended for household use only and not for commercial or industrial use.

Vacuuming of dust from products like plaster, concrete or ashes will damage the motor and void the guarantee.

!

WARNING:

Never operate your MULTI-FORCE vacuum with damp or wet filters, or without all filters in place.

9

TROUBLESHOOTING

PROBLEM

Vacuum cleaner won't run

Vacuum cleaner doesn't vacuum effectively

POSSIBLE CAUSES

1. Power cord not firmly plugged in

2. Power button not pressed down

1. Tools, hose or extension wands

are blocked

2. Filters are dirty

3. Dirt container is full

4. Hose connector not securely

attached to suction inlet

5. Crack or hole in hose

6. Air-flow regulator is set to open

7. Blocked dirt container

REMEDIES

1. Check electrical plug

2. Press power button

1. Remove each part

and check for

blockages

2. Follow instructions

for cleaning filters

on pages 7 - 9

3. Follow instructions

for emptying the dirt

container on page 6

4. Check that hose

connector is locked

into suction inlet

5. Check hose and

replace if necessary

6. Change to closed

7. Clear blockage from

the dirt container

following steps 1 to

7 at the top of this

page.

Dust blows out of the air vents

!

1. Dirt container is full

2. Filters missing or installed

incorrectly

3. Filters are dirty

4. Hose connector is blocked

5. Hose connector is not securely

attached to the suction inlet

6. Crack or hole in hose

WARNING:

To reduce the risk of electric shock, turn the

Power Switch OFF and disconnect the plug from the electrical outlet before performing troubleshooting checks.

1. Empty the dirt

container

2. Check all filters for

correct installation

3. Check and clean or

replace all filters

4. Remove hose and

check for blockages

5. Make sure the hose

connector is locked

into the suction inlet

6. Check hose and

replace if necessary

Other maintenance or service not included in the manual must be performed by an authorized Tevo service representative. For any questions or concerns, contact customer care on 0861 77 88 88.

10

REPLACEMENT PARTS HVC125

The items below are available for purchase as accessories for your MULTI-FORCE vacuum.

To purchase, contact Tevo customer care in your area. Contact details on page 12.

ITEM

1.

2.

3.

4.

5.

6.

PART NO.

ZHVC12801

ZHVC12802

ZHVC12803

ZHVC12804

ZHVC12805

ZHVC12806

PART NAME

Dirt Container Filter

Post-motor Microparticle Filter

Floor Nozzle

Flex Hose

2-Piece Extension Wand

Dusting Brush/Crevice Tool

1.

2.

3.

4.

5.

6.

11

CONSUMER GUARANTEE

Your BENNETT READ MULTI-FORCE is guaranteed against manufacture faults for a period of 1 year. If you register your gurantee online at www.tevo.co.za within 14 days of purchase, then your gurantee will be extended to 2 years.

Tevo undertakes to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the gurantee period. This gurantee excludes damage caused by misuse, neglect, shipping accident, commercial use, incorrect installation, or unauthorized repair. This guarantee does not apply to routine maintenance components such as, but not limited to, filters and brushes. Tevo is not liable for incidental or consequential damages of any nature associated with the use of this product. Tevo’s liability will not exceed the purchase price of this product.

PLEASE KEEP YOUR RECEIPT TO VERIFY YOUR GUARANTEE.

Guarantee and service enquiries can be made by contacting:

Tevo (Pty) Ltd

Gauteng 086 111 8386 or 012 740 5000

Durban (031) 570 5900

Cape Town (021) 380 0038/9

Customer Service Help Line 0861 77 88 88 www.tevo.co.za

TECHNICAL SPECIFICATIONS:

Nominal voltage: 220-240 V AC

Nominal frequency: 50/60 Hz

Rated Power Output : 1800 W

Model: SL158

12

PLEASE RECYCLE

ENVIRONMENTALLY FRIENDLY DISPOSAL

Do not dispose of electrical appliances with general municipal waste. Hazardous substances can leak and contaminate the groundwater, affecting the food chain and ultimately damaging the environment and your health. Contact your local municipality for information on safe disposal in your area.

Please think of the environment and recycle all plastic and paper in accordance with your local recycling program.

M

ULTI-

F

ORCE

THE PREMIUM CYLINDER VACUUM

WITH 13 CYCLONES FOR NO LOSS OF SUCTION *

Brought to you by:

0861 77 88 88 www.tevo.co.za | [email protected]