Totally Wicked Corsa 200 Bedienungsanleitung
Totally Wicked Corsa 200 boasts triple 18650 batteries, delivering an impressive 200 watts of power. With five operation modes (VW, Ni, Ti, SS316, and TCR), intelligent temperature control, and pre-heating functionality, it allows for precise customization of your vaping experience. Upgradeable firmware ensures you're always up-to-date.
Advertisement
Advertisement
ELECTRONIC CIGARETTE BATTERY
USER MANUAL / BEDIENUNGSANLEITUNG
TW_Corsa_200_Manual.indd 1 19/12/2016 13:20
2
Congratulations on purchasing your
Totally Wicked Corsa 200 Electronic Cigarette
The Totally Wicked Corsa 200 is the most recent addition to the Corsa range, utilising three 18650 batteries to provide an outstanding 200 watts of power. The
Corsa incorporates an intelligent temperature control system with pre-heating functionality, allowing you to finely tune your device to suit your vaping style.
Upgradeable firmware means you will always be up to date. The user is provided with five modes of operation; variable power (W); variable temperature with nickel coils (Ni); variable temperature with titanium coils (Ti); variable temperature with stainless steel coils (SS316); and temperature coefficient of resistance (TCR). The
Corsa 200 combines all of its functionality and triple 18650 batteries in a stylish and ergonomic package, sure to be popular with electronic cigarette users who require a considerable power output.
TW_Corsa_200_Manual.indd 2 19/12/2016 13:20
Battery Cover
TW_Corsa_200_Manual.indd 3
Adjustment Button
Power Button
OLED Screen
510 Thread and Sprung Connector
3
19/12/2016 13:20
4
Using your Corsa 200
Fitting Batteries:
The Corsa 200 is powered by 3 x
18650 Li-batteries. To fit the batteries simply slide the battery cover from the bottom of the device and insert
3 x 18650 batteries, ensuring the correct polarity. To replace the battery cover push it firmly into position, ensuring that it is closed securely.
Note: Please do not mix together non-matching cell brands or types, or batteries that are not of a matched set.
Power On and Off:
The Corsa 200 uses a 5-click on/ off function. To switch the device on quickly press the power button
5 times. The OLED screen will illuminate, signifying that the device is powered on. Once the Corsa 200 is powered on the user can press the button 5 times to switch the device off.
Vaping:
Simply press the power button as you inhale.
TW_Corsa_200_Manual.indd 4 19/12/2016 13:20
Using your Corsa 200
New Atomizer Installation:
When a new atomizer is connected or the existing atomizer is disconnected and reconnected, a message prompt will be displayed
– ‘New Coil Right, Same Coil Left’.
Press the right adjustment button to confirm that a new atomizer has been connected, or the left adjustment button to confirm that the existing atomizer has been reconnected.
Selection of a new coil should only be made when the atomizer and coil are at room temperature.
Charging the Batteries:
Simply charge the Corsa 200 via the USB cable when connected to a powered USB port or suitable wall adapter. The indicator on the display will indicate the battery status.
Alternatively, charge the batteries using a suitable external battery charging unit.
5
TW_Corsa_200_Manual.indd 5 19/12/2016 13:20
6
Using your Corsa 200
Battery Charge:
The individual battery charge for each of the 3 18650 batteries is displayed on the sixth row of the
OLED display.
Upgrading Firmware:
To upgrade the firmware installed on the device simply load the relevant product page on the Totally Wicked website, click on the link under
‘Firmware Upgrade’ and follow the instructions provided.
Shift between VW/TC/TCR Modes:
When powered on, press the power button 3 times consecutively, the first row will flash indicating that the right adjustment button may be used to cycle through the VW/TC/TCR modes.
TW_Corsa_200_Manual.indd 6 19/12/2016 13:20
Using your Corsa 200
VW Mode:
When in VW mode, use the left or right adjustment buttons to decrease or increase the level of wattage respectively. The available wattage range is 1W – 200W in increments of 0.1W.
Shift between TC (Ni/Ti/SS316)
Modes:
To shift between TC modes when in
TC mode, press the power button
3 times consecutively to activate the menu, press the left adjustment button once and then use the right adjustment button to cycle through the Ni/Ti/SS316 modes.
TC Mode (Ni/Ti/SS316):
When in TC mode, use the left or right adjustment buttons to decrease or increase the temperature respectively. The available temperature range is 100-315°C or
200-600°F and can be adjusted in increments of 5°C and 10°F. To adjust the wattage level whilst in TC mode, press the power button 3 times
7
TW_Corsa_200_Manual.indd 7 19/12/2016 13:20
8
Using your Corsa 200 consecutively to activate the menu, press the left adjustment button twice and the wattage value will flash, use the right adjustment button to adjust the wattage level. To lock/unlock the atomizer resistance, press the fire button 3 times consecutively to activate the menu, press the left adjustment button three times and the atomizer value will flash, use the right adjustment button the lock/ unlock the atomizer resistance. Only lock the atomizer when the coil is at room temperature.
Note: If a coil with a resistance exceeding 1.5ohms is applied in VT mode, the device will automatically switch to VW mode. Also, if a standard kanthal or nichrome coil is used under VT mode, the device will automatically switch to VW mode.
TCR Mode:
When in TCR mode and the title is flashing indicating that the menu is active, press the left adjustment button once and the sub-menu
(M1, M2, M3) will flash. Whilst the sub-menu is flashing press the right
TW_Corsa_200_Manual.indd 8 19/12/2016 13:20
Using your Corsa 200 button to shift between M1, M2 and
M3, then press the fire button to confirm. (Also see: Configuring TCR
Mode)
Configuring TCR Mode:
To set the temperature coefficient of resistance to match a particular coil, when the device is powered off simultaneously hold the fire button and the right adjustment button to enter the TCR configuration menu.
Use the right or left adjustment buttons to select which to configure from M1, M2 and M3 – this feature allows the TCR values for 3 materials to be stored to the device. Press the fire button to select the TCR value and then use the adjustment buttons to increase or decrease the value to your preference, long press the fire button or leave the device for 10 seconds to confirm the selection.
9
TW_Corsa_200_Manual.indd 9 19/12/2016 13:20
10
Using your Corsa 200
TCR Value Range:
Material
Nickel
NiFe
Titanium
SS (303, 304, 316, 317)
TCR Value Range
600-700
300-400
300-400
80-200
Note: The TCR value displayed is the 10 5 multiple of the actual TCR value and is for Corsa 200 usage only.
TW_Corsa_200_Manual.indd 10 19/12/2016 13:20
Using your Corsa 200
Pre-Heat Function:
To configure the pre-heat settings, simultaneously hold the power and right adjustment button to enter logo mode. Use the right adjustment button to select the preheat settings (wattage and time). Use the power button to cycle between the wattage and time settings, then use the left and right adjustment buttons to decrease or increase the setting respectively. Wattage can be adjusted in increments of 0.1W between 1W – 200W, and time can be adjusted between 0 (OFF) – 2.0 seconds in increments of 0.1s. Long press the power button to confirm the settings.
Puff Count and Puff Duration
Display:
The puff count/puff duration is displayed on the screen on the third row. To shift between each mode, press the power button 3 times consecutively to activate the menu, press the left adjustment button until the puff count/puff duration flashes,
11
TW_Corsa_200_Manual.indd 11 19/12/2016 13:20
12
Using your Corsa 200 use the right adjustment button to cycle through the modes. To reset either mode, long press the power button while it is displayed. Use the left button to return to Power or TC mode, and press the power button once more to return to normal operation.
Custom Logo Mode:
To add a custom logo to the device, open the ‘Firmware Update’ software as described in ‘Updating Firmware’.
Click on the ‘LOGO’ icon and select the 64 x 40 BMP image file you would like to upload. To activate/ deactivate logo mode, hold the power button and right adjustment button simultaneously to activate the regulation menu. Use the right adjustment button to select logo mode and use the left adjustment button to select between ON/OFF states, press the power button to confirm the selection. Please ensure that the firmware is updated to the latest version to use custom logo mode.
TW_Corsa_200_Manual.indd 12 19/12/2016 13:20
Using your Corsa 200
Current Display:
The real-time current (AMP) is displayed on the screen on the righthand side of the third row whilst the power button is pressed.
Imbalanced Batteries:
If the voltage difference between any 2 cells reaches 0.3V or higher,
‘Imbalanced Batteries’ will be displayed when the charging lead is connected.
Charge Error:
If no charging current is detected when the device is connected to the charging lead, ‘Charge Error’ will be displayed.
Short Circuit Protection:
If a short circuit occurs when the fire button is pressed, ‘atomizer short’ will be displayed on the screen.
Low Voltage Protection:
When the battery voltage is below
3.1V, ‘Battery Low’ will be displayed
13
TW_Corsa_200_Manual.indd 13 19/12/2016 13:20
14
Using your Corsa 200 on the screen. If following this message the button is continually pressed, the message ‘Battery Low
Lock’ will be displayed and the device will not fire. To unlock and activate the device the batteries must be recharged.
Weak Battery Alert:
Under TC/VW mode, when battery voltage is below 2.9V, the device will display ‘Weak Battery’. The output power will automatically be reduced accordingly.
Low Power Alert:
When the battery voltage is below
3.3V, ‘Battery Low’ will be displayed on the screen. If the user continues to press the power button ‘Battery
Low Lock’ will be displayed and output will be locked. Charge the batteries to reactivate the device.
TW_Corsa_200_Manual.indd 14 19/12/2016 13:20
Using your Corsa 200
10 Second Protection:
If the power button is pressed for longer than 10 seconds the output will automatically cease and the message ‘Over 10s Protection’ will be displayed.
Display Modes:
When powered off, hold both adjustment buttons to turn the display through 180°.
Stealth Mode:
When powered on, simultaneously hold the power button and the left adjustment button to activate stealth mode. Repeat the process to deactivate stealth mode.
Key Lock Mode:
When powered on, simultaneously hold the two adjustment buttons for
3 seconds to activate key lock mode.
Repeat the process to deactivate the key lock mode.
15
TW_Corsa_200_Manual.indd 15 19/12/2016 13:20
16
Kit Contents
1 x Corsa 200
1 x Silicone Cover
1 x USB Cable
1 x User Manual
TW_Corsa_200_Manual.indd 16
Specifications
Corsa 200 Dimensions: 99mm x
63mm x 22mm
Wattage Range in VW Mode and TC
Mode: 1W – 200W
Temperature Range in VT Mode: 100-
315°C / 200-600°F
Temperature Coefficient of Resist-
ance Range in TCR Mode: 1-1000
Resistance Range: 0.05-1.5ohm in VT
Mode, 0.1-3.5ohm in VW Mode
Tank Connector: 510 Connector
Battery: 3 x 18650
Firmware Type: Upgradable
19/12/2016 13:20
Product storage and battery precautions
• Store the Corsa 200 and its accessories away from children when not in use.
• Ensure the Corsa 200 is powered off when not in use.
• Avoid accidentally pressing the Corsa 200 power button when not in use.
• Please only use the charging cable provided.
• Please dispose of dead batteries in accordance with your country’s appropriate legislation.
• Use only a maximum of 1.5ohm when in VT mode. The mode will automatically be switched to VW mode when the coil is larger than 1.5ohm or a normal coil is used.
• Do not charge the batteries in a damp environment.
• Do not use the device when temperatures are outside the range -10 - 60°C.
• Do not charge the battery when temperatures are outside the range 0 - 45°C.
• Do not attempt to repair a faulty Corsa 200 as these are sealed units with no serviceable parts. Attempted repairs will void the warranty.
17
TW_Corsa_200_Manual.indd 17 19/12/2016 13:20
Warranty
The Corsa 200 components have a 28-day parts warranty. The USB cable supplied has a 12-month warranty. If any parts are found to be faulty within this time please contact our customer service team, whose details are on the back page of this booklet and we will arrange for a replacement. We may require the goods to be returned for further investigation.
18
TW_Corsa_200_Manual.indd 18 19/12/2016 13:20
Glückwunsch zum Kauf Ihrer
Totally Wicked Corsa 200 E-Zigarette.
Die Totally Wicked Corsa 200 ist das neueste Modell aus der Corsa-Serie. Mit 3
Akkus vom Typ 18650 liefert sie eine überragende Leistung von bis zu 200 Watt.
Das Gerät bietet ein eingebautes Temperatur-Kontrollsystem mit Vorheizfunktion, das individuell allen Dampfbedürfnissen angepasst werden kann. Die Firmware kann aktualisiert werden, daher ist man mit der Corsa 200 auch in Zukunft stets auf dem neuesten Stand. Der Nutzer kann aus fünf Betriebsmodi wählen; variable
Leistung (W); variable Temperatur mit Nickel-Heizwendeln (Ni); variable Temperatur mit Titan-Heizwendeln (Ti); variable Temperatur mit Edelstahl-Heizwendeln (SS316) und Temperaturkoeffizient (TCR). Die Corsa 200 vereint all ihre Funktionalität - inkl. 3 Akkus vom Typ 18650 - in einem ergonomischen und dennoch einfach zu bedienenden Paket, das auch Benutzer ansprechen wird, die Wert auf hohe
Leistung legen.
19
TW_Corsa_200_Manual.indd 19 19/12/2016 13:20
Akkudeckel
20
TW_Corsa_200_Manual.indd 20
Einstelltaster
Powertaster
OLED-Display
510er Anschluss mit gefedertem Pluspol
19/12/2016 13:20
Bedienung Ihrer Corsa 200
Akkus einsetzen:
Die Corsa 200 wird mit 3 Akkus vom
Typ 18650 betrieben. Um die Akkus einzusetzen, schieben Sie einfach den Akkudeckel am Boden der Corsa
200 auf und setzen 3 Akkus ein.
Bitte achten Sie hier auf die richtige
Polarität der Akkus. Schieben Sie dann den Akkudeckel zurück in seine geschlossene Position und stellen Sie sicher, dass der Deckel eingerastet ist.
Hinweis: Benutzen Sie keine Akkus unterschiedlicher Bauart oder
Hersteller.
Power Ein/Aus:
Powertaster 5-mal in Folge drücken; das OLED-Display leuchtet auf und signalisiert, dass die Corsa 200 an und zur Nutzung bereit ist. Zum
Ausschalten, Powertaster ebenfalls
5-mal in Folge drücken.
Dampfen:
Powertaster drücken und inhalieren.
21
TW_Corsa_200_Manual.indd 21 19/12/2016 13:20
22
Bedienung Ihrer Corsa 200
Neuen Verdampferkopf installieren:
Wenn ein neuer Verdampfer(-Kopf) eingesetzt oder ein vorhandener
Verdampfer ab- und wieder an die
Corsa 200 geschraubt wird, erscheint auf dem Display die Meldung
'New Coil Right, Same Coil Left'.
Drücken Sie den rechten Taster wenn ein neuer Verdampfer(-Kopf) genutzt wird oder den linken Taster, um zu bestätigen, dass derselbe
Verdampfer(-Kopf) zum Einsatz kommt. Die Installation eines neuen
Verdampfer(-Kopfes) sollte stets bei
Raumtemperatur erfolgen.
Akku Aufladen:
Laden Sie die Corsa 200 einfach mit dem USB-Kabel an einem geeigneten USB-Port oder USB-
Netzstecker auf. Der Ladefortschritt kann hierbei auf dem Display verfolgt werden. Alternativ können die Akkus auch in einem externen
Ladegerät aufgeladen werden
(empfehlenswert).
TW_Corsa_200_Manual.indd 22 19/12/2016 13:20
Bedienung Ihrer Corsa 200
Akku-Ladestandanzeige:
Der Ladestand der einzelnen 3 Akkus vom Typ 18650 wird in der sechsten
Zeile auf dem OLED-Display angezeigt.
Firmware aktualisieren:
Um auf die neueste Firmware der
Corsa 200 zu aktualisieren, gehen
Sie einfach auf die Totally Wicked
Produktseite der Corsa 200 unter www.totallywicked.de und klicken auf den Link 'Firmware Upgrade" und folgen Sie den weiteren
Anweisungen.
Modus wechseln - VW/TC/TCR:
Wenn die Corsa 200 eingeschaltet ist, drücken Sie den Powertaster
3-mal in Folge und die oberste Zeile blinkt auf - jetzt kann mit dem rechten
Taster rotierend in die verschiedenen
Modi (VW/TC /TCR) gewechselt werden.
VW-Modus:
Im VW-Modus kann mit dem linken oder rechten Taster die Wattleistung
23
TW_Corsa_200_Manual.indd 23 19/12/2016 13:20
24
Bedienung Ihrer Corsa 200 zwischen 1W und 200W verringert oder erhöht werden.
TC-Modus wechseln (Ni/Ti/SS316):
Um zwischen den verschiedenen TC-
Modi zu wechseln, drücken Sie den
Powertaster 3-mal in Folge, wenn Sie im TC Modus sind. Damit aktivieren
Sie das TC-Modus-Menü und können jetzt mit den Einstelltastern zwischen dem NI/Ti/SS316 Modus wechseln.
TC-Modus (Ni/Ti/SS316):
Im TC-Modus kann mit dem linken oder rechten Taster die Temperatur zwischen 100-315°C / 200-600°F verringert oder erhöht werden.
Zum Einstellen der Wattleistung im TC-Modus, drücken Sie den
Powertaster 3-mal in Folge und navigieren Sie mit dem linken Taster in die Zeile für die Watteinstellung
(PWR) - jetzt können mit dem rechten
Taster die Wattparameter geändert werden. Zum Sperren/Entsperren des Verdampferkopf-Widerstandes, drücken Sie den Powertaster 3-mal in Folge und navigieren Sie mit
TW_Corsa_200_Manual.indd 24 19/12/2016 13:20
Bedienung Ihrer Corsa 200 dem linken Taster in die Zeile 'Coil'
- jetzt kann mit dem rechten Taster der Verdampferkopf-Widerstand gesperrt bzw. entsperrt werden.
Sperren Sie den Widerstand nur bei
Raumtemperatur.
Hinweis: Sollte im TC-Modus eine Heizwendel mit einem
Widerstand höher als 1.5 Ohm zum Einsatz kommen, schaltet das Gerät automatisch in den leistungsgeregelten VW-Modus. Dies erfolgt (unabhängig vom Widerstand) ebenso, wenn versucht wird mit
Heizwendel-Typen aus Kanthaldraht im TC-Modus zu dampfen.
TCR-Modus:
Wenn der TCR-Modus ausgewählt wurde, drücken Sie den linken
Taster, um in das TCR-Untermenü
(M1, M2 und M3) zu gelangen. Dort kann mit dem rechten Taster aus 3 verschiedenen Material-TCR-Werten
(M1, M2 und M3) gewählt und mit dem Powertaster die Auswahl bestätigt werden. (Siehe auch: TCR-
25
TW_Corsa_200_Manual.indd 25 19/12/2016 13:20
26
Bedienung Ihrer Corsa 200
Modus konfigurieren)
TCR-Modus konfigurieren:
Halten Sie beim ausgeschalteten
Gerät den Powertaster und den rechten Taster gleichzeitig gedrückt, bis das TCR-Konfigurationsmenü erscheint.
Verwenden Sie den rechten oder linken Taster, um zwischen M1,
M2 oder M3 zu wechseln – diese
Funktion erlaubt eine Auswahl von 3 verschiedenen Material-TCR-Werten.
Drücken Sie anschließend den
Powertaster, um einen TCR-Wert zu bestätigen und danach den linken oder den rechten Taster, um die Werte nach Ihren Vorlieben zu verändern. Zum Bestätigen,
Powertaster länger gedrückt halten oder das Gerät für 10 Sek. ruhen lassen.
Powertaster
Rechts
+
TW_Corsa_200_Manual.indd 26 19/12/2016 13:20
Bedienung Ihrer Corsa 200
TCR Wertebereich:
Material
Nickel
NiFe
Titanium
SS (303, 304, 316, 317)
TCR Wertebereich
600-700
300-400
300-400
80-200
Hinweis: Der tatsächliche TCR-Wert ist im Dezimalsystem 10 5 -mal größer ist als der angezeigte TCR-Wert am Display und ist ausschließlich für die Corsa 200 anwendbar. 27
TW_Corsa_200_Manual.indd 27 19/12/2016 13:20
28
Bedienung Ihrer Corsa 200
Vorheiz-Funktion (Pre-Heat):
Um die Vorheiz-Einstellungen zu bearbeiten, halten Sie den
Powertaster und den rechten Taster gleichzeitig gedrückt, bis Sie in das
Logo-Menü gelangen. Benutzen
Sie den rechten Taster und wählen
Sie die Pre-Heat-Settings (Watt und
Zeit). Drücken Sie die Powertaste um zwischen den Watt- und
Zeiteinstellungen zu wechseln.
Nutzen Sie den rechten und linken
Taster um die jeweiligen Werte zu erhöhen oder zu verringern.
Einstellbare Werte: Watt: 1W - 200W
/ Zeit: 0 (Aus) - 2.0 Sek. Drücken Sie länger auf den Powertaster, um die
Einstellungen zu übernehmen.
Zug/ Dauer-Zähler:
Der Zug/Dauer-Zähler wird auf dem
Display in der dritten Zeile angezeigt.
Um zwischen den einzelnen Modi zu wechseln, drücken Sie 3-mal in Folge den Powertaster, um das Menü zu aktivieren. Drücken
Sie jetzt den linken Taster bis
'puff count/puff duration' blinkt.
TW_Corsa_200_Manual.indd 28 19/12/2016 13:20
Bedienung Ihrer Corsa 200
Durch Drücken des rechten
Tasters wechseln Sie durch die verschiedenen Einstellmöglichkeiten.
Zum Rückstellen der einzelnen
Werte, drücken Sie länger auf den Powertaster, wenn der Wert angezeigt wird. Drücken Sie kurz auf den Powertaster, wenn Sie das Menü verlassen wollen.
Individuelles Logo:
Um ein eigenes Logo auf dem
Display anzeigen zu lassen, öffnen
Sie die "Firmware Update"-Software.
Klicken Sie auf das 'Logo' Symbol und wählen ein Bild (64 x 40 BMP) aus, dass Sie hochladen möchten.
Um das Logo auf der Corsa 200 anzeigen zu lassen, halten Sie den Power- und den rechten
Taster gedrückt, um damit in das
Einstellungsmenü zu gelangen. Mit dem rechten Taster rufen Sie dann den Logo-Modus auf und wählen mit dem linken Taster ON oder OFF.
Durch Drücken des Powertasters gelangen Sie wieder in den normalen
Betriebsmodus zurück. Bitte
29
TW_Corsa_200_Manual.indd 29 19/12/2016 13:20
30
Bedienung Ihrer Corsa 200 beachten Sie, dass die Firmware auf dem neuesten Stand sein muss, um den Logo-Modus nutzen zu können.
Stromstärke-Anzeige:
Die Stromstärke wird in Echtzeit
(Rechte Seite, dritte Zeile: AMP) beim Drücken des Powertasters am
Display angezeigt.
Unausgeglichene Akkus:
Sollte der Spannungsunterschied zwischen 2 Akkus 0.3V oder höher sein, wird nach Ziehen des Ladekabels "Imbalanced
Batteries" am Display angezeigt. Der
Spannungsunterschied kann hierbei durch einen Ladevorgang in einem externen Ladegerät behoben werden.
TW_Corsa_200_Manual.indd 30 19/12/2016 13:20
Bedienung Ihrer Corsa 200
Ladefehler:
Wenn beim Anschließen des USB-
Kabels kein Ladestrom erkannt wird, erscheint am Display die Meldung
'Charge Error'.
Kurzschlussschutz:
Wenn die Corsa 200 einen
Verdampferkopf-Kurzschluss erkannt hat, erscheint am Display die
Meldung 'Atomizer Short'.
Tiefentladeschutz:
Fällt die tatsächliche Akkuspannung auf unter 3.1V, erscheint am Display die Meldung 'Battery Low'. Solange kein Ladevorgang erfolgt, ist das
Gerät für eine weitere Nutzung gesperrt.
Niedrige Akkuspannung:
Fällt während des Betriebes im
TC/VW Modus die tatsächliche
Akkuspannung auf unter 2.9V, erscheint am Display die Meldung
'Weak Battery'. Hierbei wird die
31
TW_Corsa_200_Manual.indd 31 19/12/2016 13:20
32
Bedienung Ihrer Corsa 200
Ausgabe-Leistung automatisch angepasst und reduziert.
Akku zu schwach:
Sollte die Akkuspannung unter 3.3
Volt fallen, wird am Display 'Battery
Low' angezeigt. Wird dennoch der
Powertaster gedrückt, sperrt sich das
Gerät und zeigt 'Battery Low Lock' an. Laden Sie die Akkus auf, um das
Gerät zu entsperren.
10 Sek. Sicherheitsabschaltung:
Hält man den Powertaster länger als 10 Sek. gedrückt, wird die
Stromzufuhr an den Verdampfer unterbrochen - am Display erscheint die Meldung ‘Over 10s Protection’.
Display-Anzeige drehen:
Wenn die Corsa 200 ausgeschaltet ist, drücken Sie gleichzeitig beide
Einstelltaster, um die Display-Anzeige um 180° zu drehen.
TW_Corsa_200_Manual.indd 32 19/12/2016 13:20
Bedienung Ihrer Corsa 200
Stealth-Modus:
Wenn die Corsa 200 eingeschaltet ist, Powertaster und linken Taster gleichzeitig drücken, um den Stealth-
Modus (OLED-Display aus) zu aktivieren oder zu deaktivieren.
Tastensperre:
Wenn die Corsa 200 eingeschaltet ist, rechten und linken Taster gleichzeitig gedrückt halten – mit dieser Abfolge können diese Taster gesperrt und entsperrt werden. Sind die Einstelltaster gesperrt, kann ein versehentliches Verstellen der TC/VW
Parameter verhindert werden.
TW_Corsa_200_Manual.indd 33
33
19/12/2016 13:20
Kit Inhalt
1 x Corsa 200
1 x Silikon Hülle
1 x USB-Kabel
1 x Bedienungsanleitung
Technische Daten
Corsa 200 Abmessungen: 99mm x
63mm x 22mm
Leistungsregelbereich im VW- und
TC-Modus: 1W – 200W
Temperaturregelbereich im TC-
Modus: 100-315°C / 200-600°F
Temperaturkoeffizient im TCR-Modus
(Expertenmodus): 1-1000
Akzeptierte Verdampferwiderstände:
0.05-1.5 Ohm im TC-Modus, 0.1-3.5
Ohm im VW-Modus
Verdampferanschluss: 510er Gewinde
Akku: 3 x 18650
Firmware Typ: Aktualisierbar
34
TW_Corsa_200_Manual.indd 34 19/12/2016 13:20
Sicherheitshinweise
• Die Corsa 200 und das Zubehör außerhalb der Reichweite von Kindern und
Tieren aufbewahren.
• Schalten Sie die Corsa 200 aus, wenn nicht in Gebrauch.
• Vermeiden Sie versehentliches Drücken des Powertasters, wenn nicht in
Gebrauch.
• Bitte verwenden Sie nur das beigefügte USB-Ladekabel.
• Alte oder defekte Akkus nach den gesetzlichen Bestimmungen entsorgen.
• Corsa 200 nicht in feuchter Umgebung aufladen.
• Bei Außentemperaturen unter -10°C und über 60°C Gerät nicht nutzen.
• Corsa 200 nicht bei Temperaturen unter 0°C oder über 45°C aufladen.
• Versuchen Sie nicht eine defekte Corsa 200 zu reparieren. Beim
Reparaturversuch erlischt die Garantie.
35
TW_Corsa_200_Manual.indd 35 19/12/2016 13:20
Garantie
Die Corsa 200 hat eine 28-tägige und das USB-Kabel eine 12-monatige
Garantie. Sollte eine Komponente fehlerhaft sein, bitten wir Sie Ihren Händler oder den Totally Wicked Kundenservice zu kontaktieren.
36
TW_Corsa_200_Manual.indd 36 19/12/2016 13:20
ELECTRONIC CIGARETTE BATTERY
Manufactured in China under the authority of Pillbox38 UK Ltd,
Stancliffe Street,
Blackburn, Lancashire,
BB2 2QR.
Tel 01254 692244 www.totallywicked.co.uk
Tel 1(888) 761-9425 www.totallywicked.com
Tel 0941-78447082 www.totallywicked.de
TW_Corsa_200_Manual.indd 37 19/12/2016 13:20

Public link updated
The public link to your chat has been updated.
Advertisement