Curtis Mathes CM25011 Owner's Manual

Add to my manuals
42 Pages

advertisement

Curtis Mathes CM25011 Owner's Manual | Manualzz

This product is listed by Underwriter's Laboratories, Inc. It is designed and manufactured to meet rigid U.L. safety standards against X-radiation, fire casualty and electrical hazards.

25" COLOR TELEVISION

OWNER'S MANUAL

As an ENERGY STAR

®

Partner,

Curtis Mathes has determined that this product or product model meets the

ENERGY STAR ® guidelines for energy effiency.

3250 West Big Beaver Road.

Troy, MI 48084

For more information about this or other Curtis Mathes products, please visit our web site at: www.curtismathes.com.

AA68-02610A-00 (ENG)

Customer Support: 1-877-456-2788 www.curtismathes.com

Warning! Important

Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

Note to CATV system installer: This reminder is provided to call CATV system installer’s attention to

Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

Caution: FCC/CSA regulations state that any unauthorized changes or modifications to this equipment may void the user’s authority to operate it.

Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug.

Attention: pour eviter les chocs electriques, introduire la lame le plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is an infringement of U.S. copyright laws.

Certain Canadian programs may also be copyrighted and any unauthorized recording in whole or in part may be in violation of these rights .

To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference that may cause undesired operation.

This television receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules.

S

AFETY

1

1

C

ONTENTS

C

O N T E N T S

Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1

List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1

Familiarizing Yourself with The TV. . . . . . . . . . . . . . . . . . . . . . . . . . 1.2

Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2

Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4

Chapter 2: Installation . . . . . . . . . . . . . . . . 2.1

Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . 2.1

Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . 2.1

Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . 2.2

Separate VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . 2.2

Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2

Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . 2.2

Connecting to a Cable Box that Descrambles All Channels . 2.3

Connecting to a Cable Box that Descrambles Some Channels . 2.3

Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5

Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6

Installing Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . 2.7

Chapter 3: Operation . . . . . . . . . . . . . . . . . . 3.1

Turning the TV On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1

Viewing the Menus and On-Screen Displays. . . . . . . . . . . . . . . . . . . 3.1

Viewing the Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1

Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1

Selecting a Menu Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2

Memorizing the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3

Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . 3.3

Storing Channels in Memory (Automatic Method) . . . . . . . 3.4

Adding and Erasing Channels (Manual Method) . . . . . . . . 3.5

Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6

Using the Channel Buttons. . . . . . . . . . . . . . . . . . . . . . . . . 3.6

Directly Accessing Channels. . . . . . . . . . . . . . . . . . . . . . . . 3.6

Using the PRE-CH Button to select the Previous Channel. . 3.6

Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6

Using Mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7

Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8

Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9

Viewing a VCR or Camcorder Tape. . . . . . . . . . . . . . . . . . . . . . . . . . 3.10

C

O N T E N T S

Chapter 4: Special Features . . . . . . . . . . . . 4.1

Fine Tuning Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1

Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2

Using the Surf Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3

Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4

Setting the Sleep Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5

Setting the Auto Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6

Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7

Using the V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . . 4.8

How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . 4.9

How to Set up Restrictions Using the “TV guidelines” . . . . 4.9

How to Set up Restrictions using the MPAA Ratings:

G, PG, PG-13, R, NC-17, X . . . . . . . . . . . . . . . . . . . . . . . . 4.11

How to Reset the TV after the V-Chip Blocks a Channel

(“Emergency Escape”). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.12

Chapter 5: Troubleshooting . . . . . . . . . . . . 5.1

Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1

Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . A.1

Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . A.1

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1

C

ONTENTS

2

C h a p t e r O n e

Y

O U R

N

E W

T V

List of Features

Your TV was designed with the latest technology. This TV is a high-performance unit that includes the following special features:

• Easy-to-use remote control

• Easy-to-use on-screen menu system

• Automatic timer to turn the TV on and off

• Adjustable picture and sound settings that can be stored in the TV’s memory

• Automatic channel tuning for up to 181 channels

• A special filter to reduce or eliminate reception problems

• Fine tuning control for the sharpest picture possible

• A special sleep timer

1 .1

C

HAPTER

O

NE

: Y

OUR

N

EW

TV

Y

O U R

N

E W

T V

Familiarizing Yourself with The TV

Front Panel Buttons

The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.

ΠMENU

Press to see an on-screen menu of your TV's features.

´ VOL – , +

Press to increase or decrease the volume. Also used to select items on the on-screen menu.

ˇ CH ▼ and CH ▲

Press to change channels. Also press to select various items on the on-screen menu.

¨ Remote Control Sensor

Aim the remote control towards this spot on the

TV.

ˆ POWER

Press to turn the TV on and off.

C

HAPTER

O

NE

: Y

OUR

N

EW

TV

1 .2

Y

O U R

N

E W

T V

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player.

Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.)

For more information on connecting equipment, see pages 2.1 – 2.7.

ΠAUDIO INPUT

Audio signals from VCRs, DVD players and similar devices.

ˇ VHF/UHF (75

)

Connect to an antenna or to a cable TV system.

´ VIDEO INPUT

Video signals from VCRs, DVD players and similar devices.

1 .3

C

HAPTER

O

NE

: Y

OUR

N

EW

TV

Y

O U R

N

E W

T V

Remote Control

You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV.

ΠPOWER

Turns the TV on and off.

´ Number Buttons

Press to select channels directly on the TV.

ˇ +100

Press to select channels over 100.

¨ MUTE

Press to temporarily cut off the sound.

ˆ CH ▲ and CH ▼

(Channel Up/Down)

Press CH ▲ or CH ▼ to change channels. (Also used to highlight selections on the on-screen menus.)

Ø TV/VIDEO

Press to display all of the available video sources (i.e.,

Antenna/cable, VCR).

∏ SURF

Press the SURF button to automatically return to a preferred channel after a user-preset time delay.

” SLEEP

Press to select a preset time interval for automatic shutoff.

’ PRE-CH

Tunes to the previous channel.

˝ DISPLAY

Press to see the time, channel, etc., on-screen.

Ô VOL

-

, VOL

+

Press to increase or decrease the volume. (Also used to make selections on the on-screen menus.)

 MENU

Displays the main on-screen menu.

C

HAPTER

O

NE

: Y

OUR

N

EW

TV

1 .4

2

C h a p t e r Tw o

I

N S TA L L AT I O N

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with

300-ohm Flat Twin Leads,” below.

If your antenna has one lead that looks like this, see “Antennas with 75-ohm

Round Leads,” on page 2.2.

If you have two antennas, see “Separate

VHF and UHF Antennas,” on page 2.2.

Antennas with 300-ohm Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has

300-ohm twin flat leads, follow the directions below.

1

Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied).

Use a screwdriver to tighten the screws.

2

Plug the adaptor into the

VHF/UHF terminal on the bottom of the back panel.

2 .1

C

HAPTER

T

WO

: I

NSTALLATION

I

N S TA L L AT I O N

Antennas with 75-ohm Round Leads

1

Plug the antenna lead into the VHF/UHF terminal on the bottom of the back panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1

Connect both antenna leads to the combiner.

2

Plug the combiner into the

VHF/UHF terminal on the bottom of the rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1

Plug the incoming cable into the VHF/UHF antenna terminal on back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

C

HAPTER

T

WO

: I

NSTALLATION

2 .2

I

N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the ANTENNA

OUT terminal on your cable box.

This terminal might be labeled

“ANT OUT,” “VHF OUT,” or simply,

“OUT.”

2

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

This terminal might be labeled

“ANT IN,” “VHF IN,” or simply,

“IN.”

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

2 .3

C

HAPTER

T

WO

: I

NSTALLATION

I

N S TA L L AT I O N

4

Connect a coaxial cable between the ANTENNA

OUT terminal on the cable box and the B–IN terminal on the A/B switch.

5

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

6

Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the

TV.

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the

A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

C

HAPTER

T

WO

: I

NSTALLATION

2 .4

I

N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable

TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the

ANTENNA IN terminal on the back of the VCR.

3

Connect a coaxial cable between the ANTENNA

OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the

AUDIO OUT jack on the

VCR and the AUDIO jack on the TV.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the

VIDEO jack on the TV.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

2 .5

C

HAPTER

T

WO

: I

NSTALLATION

I

N S TA L L AT I O N

Connecting a Camcorder

The rear panel jacks on your TV make it easy to connect a camcorder to your TV.

They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing a VCR or Camcorder Tape” on page 3.10)

1

Locate the A/V output jacks on the camcorder.

They are usually found on the side or back of the camcorder.

2

Connect an audio cable between the AUDIO OUT-

PUT jack on the camcorder and the AUDIO terminals on the rear of the TV.

3

Connect a video cable between the VIDEO OUT-

PUT jack on the camcorder and the VIDEO terminal on the rear of the

TV.

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.)

C

HAPTER

T

WO

: I

NSTALLATION

2 .6

I

N S TA L L AT I O N

Installing Batteries in the Remote Control

1

Slide the cover out completely.

2

Install two AA size batteries.

Make sure to match the “

+

” and

” ends of the batteries with the diagram inside the compartment.

3

Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

2 .7

C

HAPTER

T

WO

: I

NSTALLATION

O

P E R AT I O N

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the POWER button on the front panel.

Viewing the Menus and On-Screen Displays

Viewing the Menus

1

With the power on, press the MENU button .

The main menu appears on the screen. Its left side has four icons: Picture,

Sound, Channel, and

Function.

The on-screen menus disappear from the screen after about thirty seconds.

2

Use the CH ▲ and CH ▼ buttons to highlight one of the 4 icons.

Then press the VOL+ button to access the icon’s sub-menu.

Press the MENU button to exit.

You can also use the MENU ,

CHANNEL , and VOLUME buttons on the control panel of the TV to make selections.

Viewing the Display

1

Press the DISPLAY button.

on the remote control.

The on-screen display shows any or all of the following: Active channel and the Time.

The on-screen displays disappear after about twelve seconds.

When Closed Caption has been set, the icon( ) will appear by pressing the Display button.

C

HAPTER

T

HREE

: TV O

PERATION

3 .1

O

P E R AT I O N

Selecting a Menu Language

1

Press MENU to display the menu.

Press CH ▼ three times to select “Function”, then press the VOL + button.

2

Press VOL + to select the appropriate language:

English, Spanish, or

French.

3

Press MENU twice to exit.

3 .2

C

HAPTER

T

HREE

: TV O

PERATION

O

P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH ▲ and

CH ▼ buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press MENU to display the menu.

Press CH ▼ two times to select “Channel”, then press the VOL + button.

2

Repeatedly press VOL + to cycle through these choices:

ANT (antenna)

STD, HRC or IRC (all cable

TV).

Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point the signal source has been selected. Proceed to “Storing Channels in Memory”

(next page).

3

Press MENU twice to exit.

C

HAPTER

T

HREE

: TV O

PERATION

3 .3

O

P E R AT I O N

Storing Channels in Memory (Automatic Method)

1

First, select the correct signal source (ANT, STD,

HRC, IRC). See steps 1~2 on previous page.

Press the MENU button, then press the CH ▼ button twice to select

“Channel,” then press the

VOL + button.

2

Press the CH ▼ button to select “Auto Program”.

3

Press the VOL + button.

The TV will begin memorizing all of the available channels.

4

After all the available channels are stored, the

Auto program menu reappears. Press the MENU button twice to exit.

The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.

Press the MENU button at any time to interrupt the memorization process and return to the Channel menu.

3 .4

C

HAPTER

T

HREE

: TV O

PERATION

O

P E R AT I O N

Adding and Erasing Channels (Manual Method)

1

Press the MENU button.

Press the CH ▼ button twice to select "Channel", then press the VOL+ button.

2

Press the CH ▲ or CH ▼ button to select

“Add/Erase”.

Press the VOL+ button.

3

Press the VOL-/+ or number buttons to select the channel you want to add or erase.

4

Press the CH ▲ or CH ▼ button to select “Select”.

Press the VOL+ or VOLbutton to select “Added” or “Erased”.

Press the MENU button three times to exit.

C

HAPTER

T

HREE

: TV O

PERATION

3 .5

O

P E R AT I O N

Changing Channels

Using the Channel Buttons

1

Press the CH ▲ or CH ▼ button to change channels.

When you press CH ▲ or CH ▼ , the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.)

You will not see channels that were either erased or not memorized.

Directly Accessing Channels

Use the number buttons to quickly tune to any channel.

1

Press the number buttons to go directly to a channel.

For example, to select channel 27, press “2,” then “7.”

The TV will change channels when you press the second number.

When you use the number buttons, you can directly select channels that were either erased or not memorized.

To select a channel over 100, press the +100 button. (For channel 122, press “+100,” then “2,” then “2.”)

To change to single-digit channels (0–9) faster, press “0” before the single digit. (For channel “4,” press “0,” then “4.”)

Using the PRE-CH Button to select the Previous Channel

1

Press the PRE-CH button.

The TV will switch to the last channel viewed.

To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel.

Then, use the PRE-CH button to quickly alternate between them.

Adjusting the Volume

Press the VOL + or VOL– button to increase or decrease the volume.

Using Mute

At any time, you can temporarily cut off the sound using the Mute button.

1

Press the MUTE button and the sound cuts off.

The word “Mute” will appear in the lower-left corner of the screen.

2

To turn mute off, press the MUTE button again, or simply press either the VOL – or VOL + button.

3 .6

C

HAPTER

T

HREE

: TV O

PERATION

O

P E R AT I O N

Setting the Clock

1

Press the MENU button to display the on-screen menu.

Press the CH ▼ button three times to select

"Function".

Press the VOL + button.

2

Press the CH ▼ button to select the “Time” menu.

Press the VOL + button:

The Time menu will appear on the screen, and

“Clock” will be selected.

3

Press the VOL + button again (the hours digits will be selected). Press the CH

▲ or CH ▼ button repeatedly until the correct hour appears.

After the hour is entered, press the VOL + button.

(at this point the minutes digits will be selected).

4

Press the CH ▲ or CH ▼ button to select the correct minutes.

After selecting the correct minutes, press the VOL + button.

Press the MENU button three times to exit.

When selecting the hours, be sure to select the proper time of day (AM or PM).

You can change the hours by pressing

CH ▲ or CH ▼ repeatedly (or by holding down either of these buttons).

The time will appear every time you press DISPLAY.

C

HAPTER

T

HREE

: TV O

PERATION

3 .7

O

P E R AT I O N

Customizing the Picture

You can use the on-screen menus to change the contrast, brightness, tint, color, and sharpness according to personal preference. (Alternatively, you can use one of the

“automatic” settings. See next page.)

1

Press the MENU button to display the menu.

2

Press the VOL – or VOL + button repeatedly, until the word “Custom” is selected.

(When Custom is highlighted, the word “Adjust” will appear on the screen.)

3

Press the CH ▼ button to select “Adjust”, then press the VOL+ button.

(The words Color Tone,

Contrast, Brightness,

Sharpness, Color, and Tint will appear on the screen.)

Press the CH ▲ or CH ▼ button to select a particular item.

4

Press the VOL – or VOL + button to increase or decrease the value of a particular item.

Press the MENU button four times to exit.

3 .8

C

HAPTER

T

HREE

: TV O

PERATION

9

After adjusting an item, the gauge will automatically disappear (after about 5 seconds).

O

P E R AT I O N

Using Automatic Picture Settings

Your TV has three automatic picture settings (“Standard”, “Natural”, and “Mild”) that are preset at the factory. You can activate either Standard, Natural or Mild by making a selection from the menu. Or, you can select “Custom” which automatically recalls your personalized picture settings.

1

Press the MENU button to display the menu.

2

Press the VOL - or VOL + button to select the

“Standard,” “Natural,”

“Mild,” or “Custom” picture setting.

• Choose Standard for the standard factory settings.

• Natural : Optimal indoor screen condition.

• Choose Mild (“Mild Contrast”) when viewing the TV in low light, or when playing video games.

• Choose Custom if you want to adjust the settings according to personal preference (see “Customizing the Picture, page 3.8).

C

HAPTER

T

HREE

: TV O

PERATION

3 .9

O

P E R AT I O N

Using Automatic Picture Settings

Your TV has three automatic picture settings (“Standard”, “Natural”, and “Mild”) that are preset at the factory. You can activate either Standard, Natural or Mild by making a selection from the menu. Or, you can select “Custom” which automatically recalls your personalized picture settings.

1

Press the MENU button to display the menu.

2

Press the VOL - or VOL + button to select the

“Standard,” “Natural,”

“Mild,” or “Custom” picture setting.

• Choose Standard for the standard factory settings.

• Natural : Optimal indoor screen condition.

• Choose Mild (“Mild Contrast”) when viewing the TV in low light, or when playing video games.

• Choose Custom if you want to adjust the settings according to personal preference (see “Customizing the Picture, page 3.8).

C

HAPTER

T

HREE

: TV O

PERATION

3 .9

O

P E R AT I O N

Viewing a VCR or Camcorder Tape

You must select the appropriate mode in order to view the VCR or Camcorder signal on the TV.

Quick way to view the external signal: Simply press the TV/VIDEO button on the remote control.

1

Press the MENU button to display the menu.

Press the CH ▼ button twice to select

“Channel”, then press the

VOL+ button.

2

Press the CH ▼ button twice to select “TV/AV”.

3

Press the VOL+ or VOLbutton.

You will switch between viewing the signals coming from equipment connected to the TV’s A/V jacks, and the TV signal.

4

Press the MENU button twice to exit.

3 .10

C

HAPTER

T

HREE

: TV O

PERATION

C h a p t e r F o u r

S

P E C I A L

F

E AT U R E S

Fine Tuning Channels

Use fine tuning to manually adjust a particular channel for optimal reception.

1

Select the appropriate channel.

Press the MENU button to display the menu.

Press the CH ▼ button twice to select the

“Channel” menu, then press the VOL+ button.

2

Press the CH ▼ button three times to select “Fine tune”, then press the

VOL+ button.

3

Press the VOL+ and VOLbuttons to adjust the fine tuning.

Press the MENU button to resume normal viewing.

4

To store the fine tuning setting in the TV’s memory, press the CH ▼ button to select “Select”.

Press the VOL+ or VOLbutton to select “Added”.

To reset the fine tuning to

“00”, press the VOL+ or

VOLbutton to select

“Erased”.

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

4 .1

S

P E C I A L

F

E AT U R E S

Changing the Screen Size

1

Press the MENU button to display the menu.

Press the VOL + button to select the “Picture” menu.

2

Press the CH ▼ button twice to select "Size."

3

Press the VOL + or VOL button repeatedly to select “Normal” or

“Zoom”.

Press the MENU button twice to exit.

• Normal : Sets the picture to 4:3 normal mode. This is a standard TV screen size.

• Zoom : Magnifies the size of the picture on-screen.

4 .2

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

S

P E C I A L

F

E AT U R E S

Using the Surf Feature

This feature allows you to set the TV to return to a particular channel after a certain amount of time. For example, you may be watching a channel when commercials start. You can set the Surf to “5 minutes”, then switch channels. After 5 minutes, the TV will return to the original channel. To use the Surf feature:

1

While you are watching the channel to which you want to return, press the

SURF button. The onscreen display will read

“Surf Off”.

2

Press the SURF button again to set the timer in thirty second intervals, up to five minutes.

3

The time you set will begin counting down on the screen.

When the time runs out, the TV will return to the channel you were watching when you set the timer.

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

4 .3

S

P E C I A L

F

E AT U R E S

Setting the On/Off Timer

1

Press the MENU button to display the menu.

Press the CH ▼ button three times to select

"Function" menu, then press the VOL+ button.

Before using the timer, you must set the TV’s clock. (See “Setting the

Clock” on page 3.7).

2

Press the CH ▼ button to select "Time", then press the VOL+ button.

When you set the hours, make sure the correct time of day (AM or

PM) appears to the right of the hour.

3

Press the CH ▼ button to select "On time".

Press the VOL+ button to select the “On time” hours.

(The hours digits will be highlighted.)

Press the CH ▲ or CH ▼ button repeatedly to select the appropriate hours (i.e., the hour when the TV will turn on.)

4

Press VOL+ to select the

“On time” minutes.

(The minutes digits will be highlighted.)

Press CH ▲ or CH ▼ to select the appropriate minutes.

4 .4

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

S

P E C I A L

F

E AT U R E S

5

Press the VOL + button to select “On/Off.”

Press the CH ▲ (or CH ▼ ) button to turn the ontimer “On.” (Repeatedly pressing the CH ▲ or

CH ▼ button will alternate between on and off.)

6

When finished, press the

VOL + button.

7

To set the Off time, press the CH ▼ button to select “Off time.”

Press the VOL + button and set the hours and minutes. (Follow the same procedure as in steps 1~6 above.)

8

When finished setting the timer, press the MENU button three times to exit.

To deactivate the “On time,” select “Off” during this step.

Setting the Sleep Timer

The sleep timer automatically shuts off the TV after a preset time

(from 10 to 180 minutes).

1

Press the SLEEP button on the remote control.

After about 5 seconds, the sleep display will disappear from the screen, and the time interval will be set.

2

Press the SLEEP button repeatedly until the appropriate time interval appears (any of the preset values from “Off” to “180”).

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

4 .5

S

P E C I A L

F

E AT U R E S

Setting the Auto Volume

Each broadcasting station has its own signal conditions, which can make it necessary to adjust the volume every time the channel is changed. “Auto volume” lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

1

Press the MENU button to display the menu.

Press the CH ▼ button to select the “Sound” menu, then press the VOL + button.

2

Press the CH ▼ button to select “Auto Volume”.

3

Press the VOL + button to select “On”.

Press the MENU button twice to exit

4 .6

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

S

P E C I A L

F

E AT U R E S

Viewing Closed Captions

Your TV decodes and displays the closed captions that are broadcast with certain TV shows.

These captions are usually subtitles for the hearing impaired or foreign-language translations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed captions as well. Check for the closed caption symbol in your television schedule and on the tape’s packaging: .

1

Press the MENU button to display the menu.

Press the CH ▼ button three times to select the

“Function” menu.

Press the VOL+ button.

2

Press the CH ▼ button twice to select the

“Caption” menu, then press the VOL+ button.

3

Press the VOL + or VOL – button to turn closed captioning on/off.

Misspellings and unusual characters sometimes occur during closed caption transmissions, especially those of live events. There may be a small delay before captions appear when you change channels. These are not malfunctions of the TV.

4

Press the CH ▼ button to select “Mode.”

Press the VOL – or VOL + button to select “Caption” or “Text.”

5

Depending on the particular broadcast, it might be necessary to make changes to “Channels” and “Field”:

Use the CH ▲ , CH ▼ , VOL + and VOL - buttons to make the changes. (Follow the same procedure as in steps 3~4 above.)

Press the MENU button three times to exit.

In Caption mode , captions appear at the bottom of the screen, and they usually cover only a small portion of the picture.

In Text mode , information unrelated to the program, such as news or weather, is displayed. Text often covers a large portion of the screen.

Different channels and fields display different information: Field 2 carries additional information that supplements the information in

Field 1. (For example, Channel 1 may have subtitles in English, while

Channel 2 has subtitles in Spanish.)

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

4 .7

S

P E C I A L

F

E AT U R E S

Using the V-Chip

The V-Chip feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a PIN (personal ID number) before any of the V-Chip restrictions can be set up or changed.

Note : When the V-chip feature is active, channel-auto program features do not function.

Setting Up Your Personal ID Number (PIN)

1

Press the MENU button to display the menu.

Press the CH ▼ button three times to select the

“Function” menu.

Press the VOL+ button.

2

Press the CH ▼ button three times to select the

“V-chip” menu.

Press the VOL+ button.

The “Enter pin” screen will appear. Enter your 4-digit PIN number. Note: The default PIN number for a new TV set is

“ 0-0-0-0.”

3

After entering a valid PIN number, the “V-chip” screen will appear.

Press the CH ▼ button three times and highlight

“Change Pin.”

4

While the “Change Pin” field is selected, press the

VOL + button. The Change

Pin screen will appear.

Choose any 4-digits for your PIN and enter them.

Note: If you forget the PIN, press the remote-control keys in the following sequence, which resets the pin to 0-0-0-0:

POWER OFF ➜ MUTE ➜ 8 ➜ 2 ➜

4 ➜ POWER ON.

As soon as the 4 digits are entered, the “Confirm new pin” screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorized.

Press the MENU button three times to exit.

4 .8

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

S

P E C I A L

F

E AT U R E S

How to Enable/Disable the V-Chip

1

Press the MENU button to display the menu.

Press the CH ▼ button three times to select the

“Function” menu.

Press the VOL+ button.

2

Press the CH ▼ button three times to select the

“V-chip” menu.

Press the VOL+ button.

The “Enter Pin” screen will appear. Enter your 4digit PIN number.

3

The “V-Chip” screen will appear, and “V-Chip lock” will be selected (turns blue color).

To enable the V-Chip feature, press the VOL + button so that the “V-Chip lock” field is Yes. (Pressing

VOL + will alternate between Yes and No.)

How to Set up Restrictions Using the “TV guidelines”

First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.

1

Press the MENU button to display the menu.

Press the CH ▼ button three times to select the

“Function” menu.

Press the VOL+ button.

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

4 .9

S

P E C I A L

F

E AT U R E S

2

Press the CH ▼ button three times to select the

“V-chip” menu.

Press the VOL+ button.

The “Enter Pin” screen will appear. Enter your 4digit PIN number.

3

The “V-chip” screen will appear. Press the CH ▼ button, and highlight the field for “TV guidelines.”

4

Press the VOL + button.

The “TV guidelines” screen will appear. Press the CH ▲ , CH ▼ buttons to highlight one of the six age-based categories:

TV-Y Young children

TV-Y7 Children 7 and over

--------------------------------------

TV-G General audience

TV-PG Parental guidance

TV-14 Viewers 14 and over

TV-MA Mature audience

Note: These categories consist of two separate groups: TV-Y and TV-Y7

(young children through age 7), and

TV-G through TV-MA (everybody else).

The restrictions for these two groups work independently: If a household includes very young children as well as young adults, the TV guidelines must be set up separately for each age group. (See next step.)

5

At this point, one of the TV-Ratings is highlighted (blue color).

Press the VOL + button: Depending on your existing setup, a letter “U” or “B” will start blinking.

(U= Unblocked, B= Blocked)

While the “U” or ”B” is red, press the CH ▲ or CH ▼ button to block or unblock the category.

Press the MENU button once to save the TV guidelines. A TV-Rating will be highlighted, and no letters will blink.

To exit this screen, press MENU again. To select a different TV-Rating, press the CH ▲ or CH ▼ button and then repeat the process.

Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change any of the following sub-ratings:

FV: Fantasy violence

D: Dialog

L: Offensive language

S: Sexual situation

V: Violence

Note 2: The V-Chip will automatically block certain categories that are “more restrictive.” For example, if you block

“TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together similarly. (See next section.)

4 .10

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

S

P E C I A L

F

E AT U R E S

6

How to set the FV, D, L, S and V sub-ratings:

First, highlight one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on previous page).

Next, while the TV-Rating is highlighted (BLUE), repeatedly press the VOL + button. This will cycle through the available sub-ratings (FV, V, S, L or D).

A blinking letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is blinking, press the CH ▲ or CH ▼ button to change the sub-rating.

Press MENU once to save the TV guidelines. A TV-Rating will be highlighted (BLUE), and no letters will blink.

To exit this screen, press MENU again. To select a different TV-Rating, press the CH ▲ or CH ▼ button and then repeat the process.

Note: The V-chip will automatically block certain categories that are “More restrictive”. For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and TV-MA will automatically be blocked.

7

Press the MENU button three times to clear all the screens. (Or proceed to the next section, and set up additional restrictions based on the MPAA codes).

How to Set up Restrictions using the MPAA Ratings: G, PG, PG-

13, R, NC-17, X

The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. (Eventually, movie videocassettes will be encoded with MPAA ratings.) When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).

1

Press the MENU button to display the menu.

Press the CH ▼ button three times to select the

“Function” menu.

Press the VOL+ button.

2

Press the CH ▼ button three times to select the

“V-chip” menu.

Press the VOL+ button.

The “Enter Pin” screen will appear. Enter your 4digit PIN number.

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

4 .11

S

P E C I A L

F

E AT U R E S

3

The “V-chip” screen will appear.

Press the CH ▼ button twice, and select “MPAA rating.”

4

While “MPAA rating” is selected, press the VOL + button. The “MPAA rating” screen will appear.

G

PG

PG-13

R

NC-17

X

NR

B/U

B

B

B

B

B

B

U

5

Repeatedly press the CH

▼ button to select a particular MPAA category.

Pressing the CH ▼ button will cycle through the

MPAA categories:

G

PG

PG-13

R

NC-17

X

NR

B/U

B

U

B

B

B

B

B

G

PG

General audience (no restrictions).

Parental guidance suggested.

PG-13 PG-13 (Parents strongly cautioned).

R R (Restricted. Children under 17 should be accompanied by an adult).

NC-17 No children under age 17.

X X (Adults only).

NR Not rated.

While a particular category is selected, press VOL + to activate it.

A letter (“U” or “B”) will be displayed. Press CH ▲ or CH ▼ to select “U” or”B”.

Press MENU four times to save the settings and to clear all screens.

Note: The V-Chip will automatically block any category that is “more restrictive.” For example, if you block the “PG-13” category, then “R,” “NC-17,” and “X” will automatically be blocked also.

How to Reset the TV after the V-Chip

Blocks a Channel (“Emergency Escape”)

If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: “Excessive rating.”

To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions

(depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case, use the V-Chip function for an “emergency escape”:

Press the MENU button to display the menu .

Press the CH ▼ button three times to select the “Function” menu and press the VOL + button.

Press the CH ▼ button three times to highlight the “V-chip” menu and press the VOL + button.

Enter your PIN number, and press the VOL + button to temporarily disable the V-Chip Lock.

4 .12

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

C h a p t e r F i v e

T

R O U B L E S H O O T I N G

If the TV seems to have a problem, first try this list of possible problems and solutions.

If none of these troubleshooting tips apply, then call your nearest Curtis Mathes authorized service center.

Identifying Problems

Problem

Poor picture

Poor sound quality.

No picture or sound.

No color, wrong colors or tints.

Picture rolls vertically.

The TV operates erratically

The TV won’t turn on.

Possible Solution

Try another channel.

Adjust the antenna.

Check all wire connections.

Try another channel.

Adjust the antenna.

Try another channel.

Press the TV/VIDEO button.

Make sure the TV is plugged in.

Check the antenna connections.

Make sure the program is broadcast in color.

Adjust the picture settings.

If the set is moved or turned in a different direction, the power should be OFF for at least 30 minutes.

Adjust the antenna.

Check all wire connections.

Unplug the TV for 30 seconds, then try operating it again.

Make sure the wall outlet is working.

C

HAPTER

F

IVE

: T

ROUBLESHOOTING

5 .1

A .1

A

PPENDIX

A

P P E N D I X

Cleaning and Maintaining Your TV

With proper care, your TV unit will give you many years of service. Please follow these guidelines to get the maximum performance from your TV.

Placement

• Do not place the TV near extremely hot, cold, humid or dusty places.

• Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum cleaners.

• Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or paper.

• Place the TV in a vertical position only.

Liquids

• Do not handle liquids near or on the TV. Liquids that spill into it can cause serious damage.

Cabinet

• Never open the cabinet or touch the parts inside.

• Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.

• Do not put heavy objects on top of the cabinet.

Temperature

• If your TV is suddenly moved from a cold to a warm place, unplug the power cord, and allow at least two hours for moisture that may have formed inside the unit to dry completely.

Using Your TV in Another Country

If you plan to take your TV with you to a foreign country, please be aware of the different television systems that are in use around the world. A TV designed for one system may not work properly with another system due to differences in the TV channel frequencies.

Specifications

Model

Voltage

Frequency of Operation

Dimensions

Weight

CM25011

AC 120 V

60Hz

610 x 525 x 540 mm ; 24.02 x 20.67 x 21.26 inches

29 Kg; 63.93 lbs

Curtis Mathes Color Television

LIMITED WARRANTY TO ORIGINAL PURCHASER

This Curtis Mathes brand product, as supplied and distributed by Curtis Mathes and delivered new, in the original carton to the original consumer purchaser, is warranted by Curtis Mathes against manufacturing defects in materials and workmanship for a limited warranty period of:

Ninety (90) Days Labor and One (1) Year Parts and Two (2) Years Warranty for Picture Tube (CRT)

This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United

States. To receive warranty service, the purchaser must contact Curtis Mathes for determination of problem and service procedures. Warranty service can only be performed by a Curtis Mathes authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to Curtis Mathes or Curtis Mathes's authorized service center.

Curtis Mathes will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of Curtis Mathes and must be returned to Curtis Mathes. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.

To obtain warranty service, please contact Curtis Mathes at: 1-877-456-2788

For more product and customer support information, visit the Curtis Mathes website at: www.curtis mathes.com

In-home service will be provided during the warranty labor period subject to availability within the contiguous United States. Inhome service is not available in all areas. To receive in-home service, the product must be unobstructed and accessible to service personnel. If during in-home service repair can not be completed, it may be necessary to remove, repair and return the product. If in-home service is unavailable, Curtis Mathes may elect, at our option to provide for transportation of our choice to and from a

Curtis Mathes authorized service center. Otherwise, transportation to and from the Curtis Mathes authorized service center is the responsibility of the purchaser.

This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by Curtis Mathes which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal and reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems; picture tube (CRT) brightness related to normal aging, or burned-in images. Curtis Mathes does not warrant uninterrupted or error-free operation of the product.

THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WAR-

RANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESSED WARRANTY PERI-

ODS STATED ABOVE, AND NO OTHER EXPRESSED WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR COR-

PORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON Curtis Mathes. Curtis Mathes SHALL NOT BE

LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS

PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, EVEN IF Curtis Mathes HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST Curtis Mathes BE

GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY Curtis Mathes AND CAUSING THE

ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS,

DAMAGE OR INJURY TO PURCHASER AND PURCHASER'S PROPERTY AND TO OTHERS AND THEIR PROPERTY, ARIS-

ING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY Curtis Mathes, NOT CAUSED DIRECTLY

BY THE NEGLIGENCE OF Curtis Mathes. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE

ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement