Instruction Manual

Instruction Manual
Instruction
Manual
Model #: PT300
www.pure-therapy.com
PT300Manual 8x10.indd 1
08/01/2010 9:46:31 AM
!
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ BEFORE OPERATING THE PT300
WARNING: To reduce the risk of burns, fire, electric shock or injury to persons:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
T
!
Do not put small body parts near the rollers
Do not use this product around any water or damp areas; also make sure your body is completely dry before sitting in the chair
If the power cord is damaged, do not use the chair. Make sure that the power cord is replaced by the manufacturer before you use the chair again
Periodically inspect the chair and power cord for signs of damage such as cracks or tears
Only one person can use this chair at a time, more than one person can cause damage or result in injury
Do not pull on the power cord or push the back rest to move the chair. Follow the directions on how to move the chair as described in the manual
This device is for indoor use only, do not use it outdoors
Make sure the chair is turned off and unplugged when not in use
Do not massage any swollen, injured or inflamed body parts
Do not stand on the chair, only sit in it
Do not use the chair with a blanket or cushion over top of yourself or the chair. This can cause a heating problem and result in a fire or electric shock
Use this product only for its intended uses that are described in the manual
Only use attachments that are recommended by the manufacturer
Avoid eating or drinking while seated in the chair as crumbs and spilling may cause damage to the fabric and mechanisms within the chair
Make sure all controls are turned OFF before disconnecting the chair from a power supply
Do not put the power cord near hot surfaces as this can damage the power cord and result in fire or electric shock
Do not use this product if there is unfamiliar noise or noise above the normal operation
Connect this appliance to a grounded outlet only
Do not insert objects into any openings
Do not operate where oxygen or aerosol products are used
Only an experienced technician should perform maintenance on the chair, do not try to do it yourself
The maximum weight is 265 lbs
Precautions
•
•
•
•
•
•
Comfortable clothing is recommended when using this product, do not use on bare skin
Do not force any body parts into the back rest while the rollers are moving, this can cause injury and/or damage to the chair
If you feel any abnormal discomfort while the chair is operating, turn off the power supply immediately and only use the product once you have consulted your physician
Do not sit on or put pressure on the remote control
Do not pull on the power cord
When using this product after it has been in storage, check to see that the product is operating properly prior to use
Care and Maintenance
Main Body of Chair
• To remove dirt from plastic parts and armrests, wipe area with a damp cloth using a mild cleaning agent, wipe fabric exterior with damp cloth
• Do not use alcohol, caustic agents or detergents to avoid damage, discoloring or splitting of the fabric
• Clean with a soft damp cloth; do not clean with any coarse materials or strong chemicals as this can damage the fabric of the chair
Remote Control
• Wipe remote control with only a dry cloth
• Never use damp materials to clean remote.
Back rest Cushion and Head rest Cushion
• If the back rest cushion and/or head rest cushion are dirty, clean with a damp cloth or mild cleaning agent and leave out of chair until dry
Storing Method
• After cleaning chair, keep in a dry place, avoid excessive heat or cold. If you are storing the chair for a long time, cover with sheet or plastic to avoid it getting dusty or dirty
WARNING: Make sure that the outlet which the power cord is plugged into is grounded; improper grounding can result in injury or
a product malfunction.
Model #: PT300
2
PT300Manual 8x10.indd 2
08/01/2010 9:46:32 AM
TABLE OF CONTENTS
FEATURES
SAFETY INSTRUCTIONS.................................................................................2
INTRODUCTION...........................................................................................4
WHAT’S INCLUDED.......................................................................................4
GETTING STARTED........................................................................................5
Moving And Lifting.................................................................................................5
Powering On...........................................................................................................6
Head Rest Cushion Adjustment...............................................................................6
Adjusting Chair Position..........................................................................................7
SETTINGS & FUNCTIONS
Timing....................................................................................................................8
Auto/Default Mode.................................................................................................8
Shiatsu Neck Kneading...........................................................................................8
Back Rollers............................................................................................................9
Seat Vibrations......................................................................................................10
Massaging Leg Rest..............................................................................................10
Emote Buttons......................................................................................................11
Remote Lcd Screen...............................................................................................12
Massage Chair......................................................................................................13
POSSIBLE CUSTOM MASSAGE SETTINGS
The 9-5 Massage...................................................................................................14
The Prenatal Massage...........................................................................................15
Athletic Massage..................................................................................................16
The Stress Reducing Massage...............................................................................17
The Reflexology Massage......................................................................................18
SPECIFICATIONS....................................................................................... 19
TROUBLESHOOTING GUIDE........................................................................ 19
ADDITIONAL WARNINGS........................................................................... 20
NOTES...................................................................................................... 21
Reap the Health Benefits of Massage
Massage has been proven to improve and
maintain the body and mind. Doctors say a daily
dose of massage—like eating a healthy meal—
causes positive activity within your body. With the
PT300 you will benefit from improved blood and
lymphatic circulation, flexibility, quality of sleep
and body awareness. Enjoy increased range of
motion, enhanced relaxation and elevated mood.
Reduce your stress, pain and severity of injuries
with regular massage therapy.
Model #: PT300
3
PT300Manual 8x10.indd 3
08/01/2010 9:46:37 AM
G
INTRODUCTION
Congratulations on your purchase of the PT300 and taking a step towards
a stress free life. Pure Therapy’s 300 Series massage chair is like having a
personal massage therapist at your fingertips 24/7. Designed to suit any
home décor, the PT300 was engineered to relieve your daily stress and get
you ready for your days to come. Two motors provide you with a soothing massage that can target your back and neck independently. Use the
auto-massage program or customize your own and enjoy all the benefits of
massage therapy. The back massage uses the kneading technique, a gentle
circular squeezing motion that relieves stress and improves blood circulation. Use the leg rest to massage your calves simultaneously and stimulate
blood flow. Sit upright or recline completely and prepare for a massage that
normally could only be provided by a trained massage therapist. The cost
of visiting a massage therapist every day could be over $20,000 in just one
year. Your body is an investment that you cannot ignore. Live a better life
with a relaxed body and mind. So, sit back, relax and enjoy the benefits of
owning the PT300.
WHAT’S INCLUDED
Massage Chair
NUAL
USER MA
Remote
Control
Instruction
Manual
24/7 Lifetime Live Customer Support
Model #: PT300
4
PT300Manual 8x10.indd 4
08/01/2010 9:46:38 AM
GETTING
TABLE
OFSTARTING
CONTENTS
To Get Started:
•
•
•
•
•
•
•
Carefully remove the lid from the box and use the handle on the box to remove the box from the bottom tray
Remove any protective coating from the chair and move chair to a desired location in the room
Open the chair up by pulling the back rest out; make sure the back rest and leg rest are free of hands and/or other objects
Adjust the back rest cushion to your liking (see head rest adjustment)
Plug power supply cord into a grounded, surge protecting power bar
Plug the seat cushion into the chair
Make sure that there is enough room for the chair to fully recline to the lying down position without any obstacles in the way
MOVING AND LIFTING
Moving the Chair
Raise the leg rest
Make sure chair is unplugged
Roll on the wheels
→
1. Make sure the chair is unplugged.
2. Make sure no objects are in the way or
resting on or around the chair.
3. Pull the lever on the back and completely
fold the back rest in.
3. Lift the leg rest so that the chair is resting
on the wheels on the back of the chair.
4. Push or pull the chair to where you would
like it to be moved.
5. Do not use the back rest, seat or power cord
to move the chair.
Lifting the Chair
1. Ask another person to assist you.
2. Have one person lift the leg rest and
another lift by the back of the chair. Be sure
to lift with your legs and not your back.
3. Lift carefully to avoid dropping or injury.
Model #: PT300
5
PT300Manual 8x10.indd 5
08/01/2010 9:46:43 AM
POWERING ON
A
To Power On:
1. Make sure that the chair is plugged into a grounded power source through the
power supply cord located at the back of the chair. We recommend using a surge
protected power source.
2. Turn the master power switch located on the back of the chair on.
3. Using the remote control, press the power button. The chair will turn on and
begin massaging using the default settings.
4. The default massage uses all the functions operating at once at a medium intensity except for vibration. (See Default Mode for more information)
Note: Each time the chair is powered off the default settings are restored which will allow for automatic mode to start up when the
chair is powered on the next time.
HEAD REST CUSHION ADJUSTMENT
The head rest cushion is removable from the back rest of the chair. This is so you can remove the cushion if you would like to increase the intensity of
the massage.
To Remove/Add the Cushion:
1. Flip the head rest flap back for temporary removal or peel away
from Velcro to completly remove it from the chair.
2. For a more intense massage on entire back area, remove the
back rest cushion by unzipping it from the back rest.
→
3. Reattach the back rest or head rest cushion if you would like to
decrease the intensity of your massage.
Model #: PT300
6
PT300Manual 8x10.indd 6
08/01/2010 9:46:46 AM
ADJUSTING CHAIR POSITION
You can adjust the leg rest and back rest so that you are in a sitting or laying down position. While seated in the chair, the lever on the left is used to
raise and lower the leg rest and the lever on the right adjusts the back rest up and down. The chair can go as far as 158 degrees.
To Adjust the Leg Rest:
1. While sitting in the chair, reach down and
pull the lever on the left and lift.
2. Move the leg rest up by raising your legs
away and the leg rest will rise with ease
with your feet.
3. Move the leg rest down by pushing it down
with your legs.
4. Once you have adjusted the leg rest to your
level of comfort release the lever and it will
safely lock into the desired position.
Left handle adjusts leg rest
To Adjust the Back Rest:
1. While sitting in the chair, reach down to
the lever on the right (next to remote
pouch) and lift.
2. Move the back rest down into a lying
position by lightly pushing it down with
your back. The back rest does not need a lot
of pressure, and it will go down very easily.
3. Move the back rest up by sitting up and
allowing the back rest to move forward with you.
4. Once you have adjusted the back rest to
your level of comfort release the lever and
it will safely lock into your desired position.
Right handle adjusts back rest
Model #: PT300
7
PT300Manual 8x10.indd 7
08/01/2010 9:46:48 AM
TIMING
Select the length of your massage and rest. The chair will turn off
automatically once your time is up. You have three time settings to
choose from: 10 minutes, 20 minutes and 30 minutes.
To Change the Time:
1. Press the timer button on the remote.
2. Pressing this button during a massage will reset your time
settings to 10, 20 or 30 minutes. The time it resets to will depend
on the time you had set last.
3. The default time is 20 minutes.
AUTO/DEFAULT MODE
The automatic mode is the default mode for the PT300. This mode will always start each time you power on the chair.
The Automatic Settings are as Follows:
1.
2.
3.
4.
Shiatsu neck kneading is set to on, massaging towards the neck and changing direction every 20 seconds.
Back roller is set to on and massaging the full back.
The leg rest massagers are set to on and massaging at a medium intensity.
Seat vibration, by default, is set to off.
Note: Each time the chair is powered off the back rollers return the top position of the rollers route and the default settings are restored
which will allow for automatic mode to start up when the chair is powered on the next time.
Model #: PT300
8
PT300Manual 8x10.indd 8
08/01/2010 9:46:55 AM
Shiatsu Neck Kneading
Shiatsu neck kneading is a massage technique that works in a circular motion on both sides of your neck and upper spine. The PT300 offers two
options with the neck kneading massage. Towards your neck helps to increase blood flow upwards, which will refresh your mind. Away from your neck
helps to increase blood flow in your upper spine which will relax your body.
1. To turn the shiatsu neck kneading on or off, press the on/off button
next to “neck knead” on the remote control.
2. To adjust the direction of the massage, press the direction
button next to “neck knead” on the remote.
3. If you would like the massage a little stronger, remove the cushion from
the head rest. (See Head Rest Cushion Adjustment)
4. If you would like the massage on a lower intensity, reinsert the
head rest.
BACK ROLLERS
The back rollers simulate a professional back massage. The back massage has three options: upper back massage,
lower back massage and full back massage. The upper back (trapezius muscle) is usually where tension in the back
accumulates and the lower back (latisimus dorsi) is where the back tends to get strained or pulled.
1. To turn back massage on/off, press the on/off button next to “back massage” on the remote control.
• When shutting the back massage off the rollers will return to their default positions
automatically
2. To adjust the location of the back massage press the “position” button. Each time you press the
“position” button the back rollers will move to the different positions along the back (upper, lower
and full). The LCD screen on the remote control will indicate where the rollers are located.
If the massage is too intense, try sitting slightly away from the back rest with less pressure on the back rollers. If you would like the
massage to be more intense, you can remove the back rest cushion (See Head Rest Cushion Adjustment).
Model #: PT300
9
PT300Manual 8x10.indd 9
08/01/2010 9:46:57 AM
SEAT VIBRATIONS
The seat has a vibrating feature that helps stimulate blood flow as well as relax your upper thighs. You have the option
to change the intensity of the seat vibrations.
1. To turn the seat vibrations on/off, select the on/off button next to
“seat vibe”.
3. There are three levels of intensity, low, medium and high; the
bars on the LCD screen will indicate the level of intensity.
2. To adjust the intensity of the seat vibrations press the “intensity”
button next to “seat vibe”.
MASSAGE LEG REST
The leg rest has air bags inside of it that are used to massage the calves. By placing your feet in the slots you can enjoy a relaxing foot massage. The air
bag massage applies and releases pressure simulating a draining massage technique; this technique relaxes and stretches the muscles. With the leg
rest massager, you have the option to adjust the intensity.
1. To turn the calf massage on/off, select the on/off button next to
“calf massage”.
2. To adjust the intensity of the leg rest massage, press the “intensity”
button next to “calf massage”.
Model #: PT300
10
PT300Manual 8x10.indd 10
08/01/2010 9:46:58 AM
3. There are three levels of intensity, low, medium and high; the
bars shown on the LCD screen will indicate the level of intensity
the calf massage is set.
REMOTE BUTTONS
1
2
4
3
6
7
8
9
10
11
5
1. Power:
Turns chair on and off and restores rollers
to default settings
2. Timer:
Changes the length of time that the chair
will massage for (10 minutes, 20 minutes
or 30 minutes)
3. Auto:
Resets the massage chair back to the
default settings (timer will not readjust)
4. Neck Kneading On/Off:
Turns the Shiatsu neck kneading on and off
5. Neck Kneading Direction:
Adjusts the direction of the Shiatsu
neck massage; it can knead inwards or
outwards
6. Back Roller On/Off:
Turns the back massager on and off
7. Back Roller Position:
Moves the location of the back rollers to
focus on a specific section of your back.
(Full back, upper back or lower back)
8. Seat Vibration On/Off:
Turns the seat vibration on and off
9. Seat Vibration Intensity:
Increases and decreases the intensity of
the seat vibrations
10. On/Off Airbag:
Turns the leg rest massage function on
and off
11. Air Bag Force:
Increases and decreases the intensity of
the calf massage
Model #: PT300
11
PT300Manual 8x10.indd 11
08/01/2010 9:46:59 AM
REMOTE LCD SCREEN
M
The remote LCD displays what functions are on, what each function is set to, as well as how much time there is remaining in your massage. When a
function is on, a “ ” sign will appear next to the corresponding icon.
5
1
6
2
7
3
8
4
9
1.
2.
3.
4.
5.
Neck Kneading Indicator
Back Roller Indicator
Seat Vibration Indicator
Calf Massage Indicator
Timing:
The number shown indicates how long the chair will massage for
until it automatically shuts off and returns to default settings. There
are three time intervals, 10 minutes, 20 minutes and 30 minutes
6. Neck Kneading:
The arrows on the circle indicate the direction that the Shiatsu neck
kneading is moving; it can knead inwards or outwards
7. Back Roller:
The highlighted arrow indicates the section of your back that the
rollers are set to massage. (Full back, upper back or lower back)
8. Vibration:
The bars indicate the intensity of the vibrations. There are three
intensity levels, low (one bar), medium (two bars) and high
(three bars)
9. Leg Massage:
The bars indicate the intensity of the leg massage. There are three
intensity levels, low (one bar), medium (two bars) and high (three bars)
Model #: PT300
12
PT300Manual 8x10.indd 12
08/01/2010 9:46:59 AM
MASSAGE CHAIR
1
2
3
4
7
5
8
6
1. Head Rest:
This head rest has a removable cushion for the neck rollers, which
allows for a less penetrating neck rub. For a more intense neck rub,
you can remove the cushion. For directions on removing the head
rest cushion (See Head Rest Cushion Adjustment)
2. Back Rest:
The massaging back rollers and removable cushion are located in
this area
3. Seat:
Must be plugged into the chair before operation. The vibrations in
this seat are good for stimulation of blood flow in your thighs and
buttocks
4. Remote Pouch:
This pouch is for storing the remote when not in use
5. Back Rest Adjustment:
Pulling this lever unlocks the back rest so it can be moved up or down
(Located on the right when sitting in the chair)
6. Leg Rest:
You can put your calves or feet in the sections on the massaging
leg rest for a relaxing calf or foot massage
7. Leg Rest Adjustment:
Pulling this lever unlocks the leg rest so it can be moved up or down
(Located on the left when sitting in the chair)
8. Power Connection:
Plug this cord into a power supply
Model #: PT300
13
PT300Manual 8x10.indd 13
08/01/2010 9:47:03 AM
THE 9-5 MASSAGE
P
Sitting at a desk and looking at a computer screen all day can be very hard on your back. Pain in the upper back and neck is usually due to the muscles
becoming too tight. Tight muscles restrict blood flow in your back, which can make the pain worse. The Shiatsu kneading and back rolling technique
can help in relieving the pain as well as stimulate blood flow of those tight muscles.
For Upper Back Pain:
1. Adjust the chair so that you are lying down using the right
lever for the back rest and the left lever for the leg rest.
4. Turn the power to the chair on.
5. Turn off the vibration and the leg rest functions by pressing the on/
off buttons for each.
2. Adjust your body so that your neck is centered between the shiatsu
neck kneading area.
6. Adjust the back rollers to focus solely on the upper back by
selecting the roller location button on the remote.
3. Make sure your spine is aligned with the center of the back rest
so the rollers will focus on the proper muscles.
7. Set the timer for 10 minutes.
Model #: PT300
14
PT300Manual 8x10.indd 14
08/01/2010 9:47:06 AM
PRENATAL MASSAGE
Lower back pain is a common problem; it is especially common in pregnant women as they carry their baby low on their bodies. The lower back
massage is great for getting the lower back muscles relaxed and stimulating blood flow to relieve pain.
For Lower Back Pain:
1. Adjust the chair into the sitting position, using the right lever
for the back rest and the left lever for the leg rest. Make sure
you are sitting up straight.
2. Move your body so that your lower back is against the back rest.
4. Turn the power to the chair on.
5. Turn off the neck kneading and leg rest massage functions by pressing
the on/off buttons for each.
6. Adjust the back rollers to focus solely on the lower back by selecting
the roller location button on the remote.
3. Make sure your spine is aligned with the center of the back rest
so the rollers will focus on the proper muscles.
7. Set the timer for 20 minutes.
Model #: PT300
15
PT300Manual 8x10.indd 15
08/01/2010 9:47:09 AM
ATHLETIC MASSAGE
T
One of the largest complaints in athletes is leg pain. This can be caused by over exertion of the legs, muscle strains, general weakness or even long
hours of standing. The leg rest massager can help relieve leg pain with gentle air bags that apply the right amount pressure to relieve those sore areas.
For Leg Pain:
1. Adjust the chair using the right lever for the back rest and left lever
for the leg rest, so that you are sitting straight, with your legs up
and stretched out in front of you.
2. You may have to move your body slightly or lay down to make sure
your calves comfortably fit into the leg rest sections.
4. Turn off the neck kneading and back rolling function by pressing the
on/off buttons for each.
5. Turn on the seat vibration function by pressing the on/off button.
6. Turn the intensity levels for the seat vibrations and leg massage to a
setting you feel comfortable with by pressing the intensity button for
each function on the remote.
3. Turn the power to the chair on.
7. Set the timer for 30 minutes.
Model #: PT300
16
PT300Manual 8x10.indd 16
08/01/2010 9:47:11 AM
THE STRESS REDUCING MASSAGE
Relaxation is the best cure for stress. Techniques such as deep breathing and meditation can help in relieving stress but the most recommended stress
relief technique involves relaxing the muscles through massage. The PURE THERAPY 300’s massagers can aid in relaxing the muscles and in turn,
relaxing the mind and body.
For Reducing Stress:
1. Adjust the chair using the right lever for the back rest and left lever
for the leg rest, so that you are sitting up, with your legs elevated.
4. Leave all functions on and turn up the leg rest massage intensity to
enjoy a relaxing back massage and a vigorous foot massage.
2. Make sure your spine is straight with the back rest, then bring your
feet up and insert them into the massage areas on the leg rest.
5. Set the timer for 30 minutes.
3. Turn the power to the chair on.
Model #: PT300
17
PT300Manual 8x10.indd 17
08/01/2010 9:47:18 AM
THE REFLEXOLOGY MASSAGE
S
Many activities and occupations such as nursing, serving and shopping can cause you to be on your feet for long periods of time. The massager
leg rest uses air bags to apply pressure to the feet, simulating the massage technique called reflexology. Reflexology aids in relaxing the entire body
and easing any pain in your feet.
Foot Massage:
1. Adjust the chair using the right lever for the back rest and left lever
for the leg rest, So that you are sitting up, with your legs elevated.
4. With your feet in the massage area, turn on the airbag function to high
intensity.
2. Bring your feet up and insert them into the massaging areas on
the leg rest, then turn the power on.
5. Set the timer for 30 minutes.
3. Turn all other functions in the chair off.
Model #: PT300
18
PT300Manual 8x10.indd 18
08/01/2010 9:47:22 AM
SPECIFICATIONS
Product Measure (leg and back rest not reclined) .......42.9" X 46.3" X 27.6"
External Carton Measure .............................................41.3" X 28.7" X 26.7"
Gross Weight ...............................................................127.87 lbs
Net Weight ..................................................................108.03 lbs
# Of Back Rollers .........................................................4
# Of Air Cushions In Seat..............................................0
# Of Air Cushions In Calves...........................................6
LCD Display on Remote................................................Yes
Massage Modes...........................................................Default
....................................................................................Manual
Available In PVC Synthetic Leather ....................... Yes
Adjustable Angle Of Back Rest ............................. Yes
Adjustable Angle Of Calves Position ..................... Yes
Vibration .............................................................. Yes
Automated Programs ........................................... Yes
CETL/ETL Certified ................................................ Yes
TROUBLESHOOTING GUIDE
I am hearing strange noises coming from the
motors chair and/or the leg stretch
The massage rollers stopped moving during
operation
I am unable to recline the leg rest and/or back
rest
The leg rest is not turning on with the rest of the
chair
The unit is not working at all
There is damage to the cord and/or unit
I feel unusual pain and discomfort to my body
• The motors within the chair make regular operation noises; therefore most noises
are completely normal. If the noise becomes very loud or straining, contact your
manufacturer.
• If you apply too much pressure on the rollers they may stop moving for safety
purposes. Try to ease up on the rollers and they should start working again.
• Make sure there are no obstacles around the chair that can be stopping it from
reclining
• The leg rest functions separately from the chair. You must turn it on separately using
the leg rest functions on the remote.
• Make sure it is plugged into a power source
• Make sure the switch located at the back of the chair is set to the ON position
• The time may have come up, try turning the chair on with the remote again
• Stop using the chair immediately and do not use until repaired and inspected by a
professional
• Stop using the chair immediately and contact your doctor or physician
Model #: PT300
19
PT300Manual 8x10.indd 19
08/01/2010 9:47:25 AM
ADDITIONAL WARNINGS
N
Read all instructions before using this appliance
When using an electrical appliance, basic precautions should always be taken, including the following:
Grounding instruction
This product must be grounded, if it should malfunction or breakdown, grounding provides a path of least resistance for
the electric current to reduce the risk of electric shock. This product is equipped with a cord that has an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
Danger
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified
electrician or service man if you are in doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product if it will not fit your outlet, instead, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in the below image. Make sure that the product is connected to an outlet that has the same configuration as the plug. No
adapter should be used with this product.
This appliance is intended for household use only.
Danger
• Do not use alcohol, caustic agents or detergents on the chair in order to avoid any damage, discoloring and/or splitting of the fabric
• Never use damp or wet materials on the remote control to avoid damage
• Avoid leaving the device in direct sunlight or in excessive heat as this can cause fading of the fabric and/or color change
Danger
To reduce the risk of electrical shock:
1. Always unplug the appliance from an electrical outlet immediately after using, turning off and before cleaning.
Warning
To reduce the risk of burns, fire, electric shock or injury to persons:
1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use as well as before putting on and/or taking off any parts.
2. Do not operate machine whilst under a blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury.
3. Close supervision is necessary when this massager is used on or near children, invalids or disabled persons. Keep children away from the extended back support
and foot support (as well as any other similar parts).
4. Use this massager only for its intended use as described in this manual. Do not use attachments that are not recommended by the manufacturer.
5. Never operate this massager if it has a damaged cord or plug, if it is not working properly, if it has been dropped, damaged, or dropped into water. You must
return the massager to a certified service center for examination and repair before using again.
6. Do not carry the device with the supply cord or use the supply cord as a handle.
7. Keep the cord away from heated surfaces.
8. Never operate where aerosol (spray) products are being used or where oxygen is being administered.
9. To disconnect, turn all controls to the off position, then remove the plug from the outlet.
10. Connect this massager to a properly grounded outlet only.
Warning!
To avoid injury, do not remove the back cushion when the chair is turned on or operating.
This appliance is equipped with a thermal resetting protection device. This is a safety feature to protect the appliance from overheating. If the appliance should suddenly stop and will not start, turn off the main switch and remove the plug from the outlet and do not operate the appliance for at least
30 minutes. Failure to turn the appliance off may result in the appliance starting unexpectedly when the device cools. Any other servicing should be
preformed by an authorized service representative.
Model #: PT300
20
PT300Manual 8x10.indd 20
08/01/2010 9:47:25 AM
NOTES
Model #: PT300
21
PT300Manual 8x10.indd 21
08/01/2010 9:47:25 AM
Model #: PT300
22
PT300Manual 8x10.indd 22
08/01/2010 9:47:27 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement