HDMI Quad 4x4 Video Wall
Matrix Switch # 15197
Operation Manual
Introduction
Features
Applications
The HDMI Quad 4x4 Video Wall Matrix Switch is designed to utilize 4 HDMI video sources, such as Blu Ray players, XBox, PS3 etc and to display any or all of the 4 video sources onto four
HDMI input LCD, LED or Plasma monitors/TV's. Display the desired video signal on to the monitors in different formats using various switch modes, including 'Video Wall' mode. Ideal for use in Advertising displays, Educational lectures, Commercial and Industrial applications and it is also perfect for integration with your Home Theatre setup.
The HDMI Quad 4x4 Video Wall Matrix Switch has real versatility, enabling selection of any video input source to display on 1, 2, 3 or 4 screens. Select either as individual screens, where the 4 video sources display on one monitor each, or as a 'video wall' with the one video source split over the 4 monitors to display as one overall picture. You can select 1 (or 4) of the video sources to display to all 4 monitors individually, or make one large video wall screen using the 4 monitors to display one video source as an overall image.
Another display scenario is PoP (Picture on Picture) where you can select any 2 video sources, display one as the 'main' and the other as the 'sub' (overlayed on top of the 'main' image). Swap
'main' and 'sub' display as needed.
Audio support of audio specifications up to 2CH LPCM 7.1 Surround Sound @ 192kHz sample rate.
•
•
•
•
•
•
•
• Supports 3 selectable viewing modes
• Supports HDMI Matrix mode, works as a 4 x 4 HDMI switch
Supports Dual mode for POP display of 'main' and 'sub' video sources
Supports 'Video Wall' mode for display of one video source as one image over the 4 monitors
Supports OSD, RS-232, Remote control and front panel buttons for unit operation and setup
Support audio specs up to 7.1 2CH LPCM @ 192kHz sampling rate
Slimline, flat black metal finish
Easy to read and access connections and operating buttons
Low power consumption
• Video Conference
•
Home theater
•
Business presentation
•
Lecturing room
System Requirements
• Source equipments such as PC/Video /DVD player with HDMI output connector(s)
•
Displays TV/monitor with HDMI input connector(s)
Operation Controls and Functions
Front Panel
The following sections describe the hardware components of the unit.
Back Panel
1. POWER
Press to power on the system, press again to turn the system to standby.
2. IR SENSOR
3. MENU/EXIT
Press to enter MENU mode and press again to EXIT the menu or return to previous page.
4. - and +
Press to toggle through various control or setting values.
5. OUTPUT
Select output HDMI source monitors 1~4
6. INPUT
Select Input HDMI source equipment A~D (Bluray, PC, Xbox. PS3
7. Dual Matrix
Select operation mode for display configuration
8. LOCK
Locks display buttons to current selection
9. SAVE
Save current display configuration
10. RECALL
Set last saved display configuration for use
1. HDMI INTPUT
Connect the input source equipment up to 4 display monitors simultaneously
2. HDMI OUTPUT
Connect the output source equipment up to 4 display monitors simultaneously
3. USB SERVICE ONLY
Connect to pc for firmware and software updates. Manufacturer use only
4. RS-232
Connect 3.5mm phone jack to D-Sub 9pin adaptor to the PC/Notebook device for RS-232 control.
5.DC 12V
Plug the 12V DC power supply into the splitter and connect the adaptor to AC wall outlet.
RS-232 Protocol
Specifications
Press once to reset current setting values back to factory default value
RS-232 IN
6
7
4
5
2
3
PIN
1
8
9
NC
NC
Baud Rate: 9600 bps
Data bit: 8-bit
Parity: None
Stop Bit: 1
Flow Control: None
Assignment
NC
TxD
RxD
NC
GND
NC
NC
6
7
4
5
8
9
2
3
PIN
1
RS-232 OUT
Assignment
NC
RxD
TxD
NC
GND
NC
NC
NC
NC
Video Bandwidth:
Input Ports:
Output Ports:
Audio
Power Supply:
Dimensions (cm's):
Weight (kg's):
Chassis Material
Silkscreen Color
Operating Temperature
Storage Temperature
Relative Humidity
225Mhz / 6.75Gbps
4 x HDMI
4 x HDMI up to 7.1 2 CH LPCM @ 192kHz sampling rate
100-240vAC to +12vDC 3A (US/EU standards, CE/FCC/UL certified)
43.2 x 17.2 x 4.4
2.2kg
Metal
Black
0 C ~ 40 C / 32 F ~ 104 F
-20 C ~ 60 C / -4 F ~ 140 F
20 ~ 90% RH (non-condensing)
Connection Diagram