Philips 27PT31B1 Color Television Quick Use and Installation Guide
Below you will find brief information for Color Television 27PT31B1. This guide helps you connect your new Philips 27PT31B1 to your antenna or cable, program channels, and use the remote control. It covers basic setup, channel management, language selection, and clock settings. Learn to optimize picture and sound quality with features like AutoPicture and AutoSound.
Advertisement
Advertisement
Model 27PT31B1
Color Television and Remote Control
C
ABLE
TV
C
ABLE
I
NPUT
/C
ONVERTER
Y
our Cable TV input into your home may be a single (75 ohm) cable or a converter box installation.
In either case, the connection to the TV is very easy.
Just put the threaded end of the cable signal to the
TV's antenna plug and screw it down tightly.
BEGIN
If your Cable TV signal is a single, round cable
(75 ohm), then you're ready to connect to the TV.
If you have a cable converter
box, connect the cable TV signal to the cable signal IN(put) plug on the converter.
Cable TV Company
Connect the cable TV cable to the
ANTENNA/CABLE plug on the TV.
If you have a cable converter box, connect the OUT(put) plug from the converter to the 75
Ω
(ohm) plug on the
TV.
Cable TV Signal Input
ANT 75
Ω
NOTE: The connecting cable for the converter is supplied by the cable TV company.
IN
Q
UICK
U
SE AND
I
NSTALLATION
G
UIDE
T
ABLE OF
C
ONTENTS
Getting Started
10
9
8
7
11
12
6
5
1
2
4
3
Warning/Precautions ..................................1
Hooking Up Your TV ................................1
Basic TV and Remote Control Operation .................2
How to Use the Install Controls ...........................3–4
Using the Language Control......................................3
Setting the Tuner Mode .............................................3
Setting the TV to Auto Program Channels ................3
Using the Channel Edit Control ................................4
Setting the Channel Name Control............................4
How to use the AutoChron™ control........................4
• For details on product registration, warranty,
and service, refer to the other literature included with your TV information packet.
Please retain all these materials and keep them handy for future reference.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
NOTE: This Quick Use Guide may be used with other models. Some of the features listed may or may not apply to your TV.
OUT
OR
Round Cable
75
Ω
(Ohm)
2
ANT 75
Ω
8 8
VIDEO
Monitor out
+ R – – L +
SURROUND SOUND
AV1 in AV2 in
L
AUDIO
R
Y
Pb
Pr
S-VIDEO
Back of TV
S
MART
H
ELP
Remember to set the TV for the type signal to which you've just connected (see the “Tuner” section on page 3).
To select only the channel numbers on your cable system, see “Auto Program”
(page 3). If you use a cable converter box, set the TV to the same channel as the converter's CH 3/4 switch (on the back of the converter).
Cable TV Converter
Box Connection
1
A
NTENNA
C OMBINATION UHF/VHF
A
combination antenna receives normal broadcast channels (VHF 2–13 and UHF 14–69). Your connection is easy because there is only one 75
Ω
(ohm) antenna plug on the back of your TV, and that’s where the antenna goes.
Combination VHF/UHF
Antenna
(Outdoor or Indoor)
BEGIN
If your antenna has a
round cable (75 ohm) on the end, then you're ready to connect it to the TV.
If your antenna has flat, twin-
lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300- to 75-ohm adapter.
1
Twin-Lead
Wire
Round Cable
75
Ω
(Ohm)
300
Ω
(Ohm) to
75
Ω
(Ohm) Adapter
OR
Push the round end of the adapter (or antenna) onto the
75
Ω
(ohm) plug on the back of the TV. If the round end of the antenna wire is threaded, screw it down tightly.
ANT 75
Ω
2
ANT 75
Ω
8 8
+ R – – L +
SURROUND SOUND
AV1 in AV2 in
VIDEO
Monitor out
L
AUDIO
R
Pb
Y
Pr
S-VIDEO
Back of TV
NOTE: For homes with separate UHF and
VHF antennas, you will need an optional combiner to connect to the TV.
U/V
Combiner
ANT 75 VIDEO
+ R – – L +
SURROUND SOUND
Monitor out AV1 in AV2 in
AUDIO
S-VIDEO
Back of TV
300- to 75-Ohm Adapter
S
MART
H
ELP
Remember, be sure to set the TV for the type of signal to which you've connected
(see the “Tuner” section on page 3).
To set the TV to select only the channel numbers in your area, see how to
“Program” or “Add” channels in memory on page 3 (“Auto Program” section).
Contact your dealer, or call our Parts
Information Center at
1-800-851-8885 to order the following accessories:
• 300
Ω
(ohm) to 75
Ω
(ohm) adapter
• Combination
VHF/UHF antenna.
TV
TO
VCR
B
ASIC
C
ONNECTION
F
ollow the steps to the right to connect a basic antenna or cable TV signal to a VCR, and then the VCR to the TV. For information on other hookups (possible when cable/descrambler boxes are included), refer to the owner’s manuals for the
VCR and the cable converter.
BEGIN
Connect your antenna or cable TV signal to the
IN FROM ANT(enna) plug on the VCR.
300
Ω
(Ohm) to
75
Ω
(Ohm) Adapter Outdoor
VHF/UHF
Antenna
Cable TV signal
OR
Connect the OUT TO
TV plug on the VCR to the
75
Ω
(ohm) plug on the TV
(connecting cable supplied with the VCR).
IN FROM ANT.
OUT TO TV
1
Refer to the owner's
manual included with your
VCR for other possible connections and TV/VCR operating details.
Round Cable
75
Ω
(Ohm) Supplied with VCR
ANT 75
Ω
2
ANT 75 Ω VIDEO
+ R – – L +
SURROUND SOUND
Monitor out AV1 in AV2 in
AUDIO
R
Pb
Pr
S-VIDEO
Back of TV
VCR
3135 015 17691 1
TV
AND
R
EMOTE
C
ONTROL
O
PERATION
T
ELEVISION
Press the POWER
button to turn the TV ON.
Press the VOL (+) button to increase the sound level or
the VOL (–) button to lower the sound level.
Pressing both buttons at the
same time will display the onscreen menu. After you are in the menu, use these buttons to make adjustments or selections.
Press the CH ▼ (down) or
▲ (up) button to select TV channels. Use these buttons to make adjustments or selections in the onscreen menu.
NOTE: Press three number
buttons on the remote control for channels 100 or above. For example: Press 1 then 2 then 5 for channel 125.
Point the remote control toward the remote sensor window on the TV when operating the TV with the remote.
REMOTE SENSOR WINDOW
MENU
CH – VOL +
R
EMOTE
B ATTERY I NSTALLATION
T o load the supplied batteries into the remote:
1. Remove the battery compartment lid on the back of the remote.
2. Place the batteries (2- AA) in the
remote. Be sure the (+) and (–) ends of the batteries line up correctly (the inside of the case is marked).
3. Reattach the battery lid.
Sleep Button
Press to set the TV to automatically turn itself OFF. Press to set the TV to automatically turn itself OFF after a period of time. Choose 15, 30, 45, 60, 90, 120, 180, or 240 minute before the TV will automatically turn off.
Status/Exit Button
Press to see the current channel number on the TV screen.
Also press to clear the TV screen after control adjustments.
Multimedia Button
Press repeatedly to select the different signal sources connected to the A/V inputs on the TV.
TV/VCR/ACC Mode Switch
Slide to the TV position to control TV functions, to the VCR position to control VCR functions, or to the ACC position to control the functions of accessory devices (a cable converter, DBS, or
DVD, for example).
VCR-Record Button
Press to start the recording of a videotape.
Incr. Surr. Button
Press to set various factory Surround Sound listening modes.
Number Buttons
Press the number buttons to select TV channels. When selecting single-digit channels, press the number of the desired channel. The TV will pause for a few seconds and then tune to the selected channel. (Note: You can press 0, then the number also.) For channels 100 and above, first press 1 then the next two numbers of the desired channel.
Sound Button
Press to select an AutoSound™ control. Choose from three factory-set controls (VOICE, MUSIC, and THEATRE) and a
PERSONAL control that you set according to your own preferences through the onscreen Sound menu. The three factoryset controls will tailor the TV sound so as to enhance the particular type of program you are watching.
Menu Button
Press for the onscreen menu to appear. Pressing the menu button after menu selections are made will eliminate the menu from the display.
Cursor Buttons (Left, Right, Up, Down)
Press these buttons to highlight, select, and adjust items on the TV's onscreen menu.
Volume (+) or (–) Buttons
Press to adjust the TV sound level.
Mute Button
Press to turn the TV sound OFF. Press again to return the sound to its previous level.
SLEEP
1
TV
MULTIMEDIA STATUS/EXIT CC CLOCK
VCR VCR
ACC
RECORD
INCR.
PROGRAM TV/VCR
A/CH
SURR.
LIST
SOUND
MENU
VOL
MUTE
POWER
PICTURE
SURF
CH
POWER
CLOCK
SLEEP
CC
MUL
TIMEDIA
STA
TUS/EXIT
INCR.
VCR
PROGRAM
SURR.
LIST
RECORD
A/CH
SOUND
MENU
PICTURE
SURF
MUTE
CH
VOL
2
4
S
MART
H
ELP
Remember, you can press any button on the front of the TV to turn the TV ON.
The tuned channel number will always briefly appear on the screen when the TV is first turned ON
(and when the channel is changed).
You also can press the
STATUS/EXIT button (on the remote control) to see what channel the TV is on.
2
3
Power Button
Press to turn the TV ON and OFF.
CC Button
Press to select Closed Captioning options within the menu.
(See the Instructions for Use manual for details.)
Light Button
Press to back-light the buttons on the remote control.
Clock Button
Press the CLOCK button to access the onscreen Clock menu.
TV/VCR (A/CH) Button
TV/VCR – Press while in the VCR mode (the VCR indicator on the front of the VCR will light) to view the playback of a tape. Press again to place in the TV position (the VCR indicator light will go off) to view one program while recording another program.
A/CH – Press to toggle between the currently viewed channel and the previously viewed channel.
Program List Button
Press to display a list of channel numbers and their names
(see the “Tuner,” “Auto Program,” “Channel Edit,” and
“Name” sections on pages 3 and 4 for proper setup). Each channel will appear as a selectable menu item. The current channel will be highlighted by default. Only five channels will be shown onscreen at one time; press the CURSOR
UP or CURSOR DOWN button to scroll the list and highlight a channel. Press the CURSOR RIGHT button to tune to the highlighted channel. Channels marked “Skipped” in the “Channel Edit” control will not appear in the list. Each channel that is being blocked by AutoLock™ will appear with a padlock icon to indicate that the channel is not viewable.
Picture Button
Press to select an AutoPicture™ control. Choose from four factory-set controls (MOVIES, SPORTS, WEAK SIGNAL, and MULTI MEDIA) and a PERSONAL control that you set according to your own preferences through the onscreen
PICTURE menu. The four factory-set controls will tailor the TV picture so as to enhance the particular type of program you are watching, or to improve the picture of a program that has a weak signal.
Surf Button
Press to select previously viewed channels. You can place up to 10 channels in memory. Then by pressing the SURF button you can quickly view the select channels. (See the “Using the
Channel Surf Control” section in your Instructions for Use manual to see how to select a series of channels using the Surf button.)
VCR
§§
, ■ ,
©
,
©©
, II Buttons
Press to rewind, stop, play, fastforward, or pause a videotape.
Channel (+) or (–) Buttons
Press to change the tuned channel.
H
OW TO
U
SE THE
I
NSTALLATION
F
EATURES
F
L ANGUAGE
or or Spanish- and
French-speaking TV owners, an onscreen LAN-
GUAGE option is present.
The LANGUAGE control enables you to set the TVÕs onscreen menu to be shown in either English, Spanish, or
French.
5
2
VOL
1
MUTE
MEN
U
CH
7
SOU
ND
6
Press the MENU button on the remote control to show the onscreen menu.
3
SLEEP
0
4
SURF
8
VCR
TV MULT
IMED
IA ST
ATUS
/EXIT ACC
RECO
1 RD
VCR
5
SURR
.
2
INCR
.
5
6
LIST
CC
PRO
GRAM
A/CH
TV/VC
R
3
9
PICT
URE
CLOC
K
4
POW
ER
PICTURE
SOUND
FEATURES
INSTALL
Press the CURSOR
DOWN button repeatedly until INSTALL is highlighted.
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
Press the CURSOR
RIGHT button to shift the menu to the left and highlight
LANGUAGE.
Press the CURSOR
RIGHT button to highlight the LANGUAGE control options.
Press the CURSOR UP or CURSOR DOWN button to select ENGLISH,
ESPANOL (Spanish), or
FRANCAIS (French).
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
ENGLISH
FRANCAIS
ESPANOL
Press the
STATUS/EXIT button to clear the menu from the screen.
S
MART
H
ELP
Remember, the LANGUAGE control makes only the TVÕs onscreen MENU items appear in English, Spanish, or French text. It does not change the other onscreen text features, such as
Closed Captioning (CC), with TV shows.
Pressing the STATUS/EXIT button on your remote control after making adjustments to the TV will remove the menu from the screen. You also can back out of the menu by repeatedly pushing the
MENU button on your remote control.
T
UNER
he TUNER feature T allows you to change the
TV’s signal input to CABLE,
ANTENNA, or AUTO mode.
It’s important for the TV to know if you want to receive channels from a cable TV signal or a normal antenna signal.
NOTE: The AUTO mode setting helps the TV determine the type of signal or channels being received when AUTO
PROGRAM is activated.
Press the MENU button on the remote control to show the onscreen menu.
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
Press the CURSOR
DOWN button repeatedly until
INSTALL is highlighted.
Press the CURSOR
RIGHT button menu to the left.
to shift the
Press the CURSOR
DOWN button light TUNER.
once to high-
Press the CURSOR
RIGHT button to highlight the tuner options.
With the TUNER control set to AUTO, Auto Program
(see below) will detect whether or not cable input is present.
If, however, you want to set the TUNER to CABLE or
ANTENNA, press the
CURSOR UP or CURSOR
DOWN button until either
CABLE or ANTENNA is highlighted.
Press the
STATUS/EXIT button to clear the menu from the screen.
VOL
1
MUTE
MEN
U
7
SOU
ND
SLEEP
4
0
8
ACC
1
VCR
RECO
RD
5
TV
VCR
MULT
IMED
IA ST
ATUS
/EXIT
SURR
2
.
INCR
.
LIST
PRO
GRAM
3
CC
A/CH
R
6
9
PICT
URE
SURF
CLOC
K
POW
ER
3
CH
5
2
4
6
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
S
MART
H
ELP
When CABLE is selected, channels 1–125 are available.
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
AUTO
CABLE
ANTENNA
When ANTENNA is selected, channels 2–69 are available.
A
UTO
P
ROGRAM
Y our TV can automatically set itself for local area
(or cable TV) channels. This makes it easy for you to select only the TV stations in your area by pressing the
CHANNEL (+) or (–) button.
Press the MENU button on the remote control to show the onscreen menu.
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
VOL
1
MUTE
6
MEN
U
7
SOU
ND
SLEEP
0
4
8
VCR
TV
ACC
RECO
1 RD
VCR
SURR
.
2
MULT
IMED
IA ST
ATUS
/EXIT
INCR
.
LIST
PRO
GRAM
5 3
CC
A/CH
R
6
9
PICT
URE
SURF
CLOC
K
POW
ER
CH
2
4
3
5
Press the CURSOR
DOWN button repeatedly until
INSTALL is highlighted.
Press the CURSOR
DOWN button repeatedly until the AUTO PROGRAM control is highlighted.
Press the CURSOR
RIGHT button to shift the menu to the left. LANGUAGE will be highlighted.
Press the CURSOR
RIGHT button channels.
to start the
Auto Program scanning of
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
SEARCH
Press the
STATUS/EXIT button clear the menu from the screen.
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
CABLE
PLEASE WAIT
CHANNEL 12 to
S
MART
H
ELP
After youÕve run Auto
Program, check out the results. Press the CHANNEL
(+) or (Ð) button and see which channels you can select.
Remember, an antenna or cable
TV signal must first be connected to your TV (see instructions for making connections on page 1 of this guide).
If you want to delete any unwanted channels from the
TVÕs memory, see the ÒCHAN-
NEL EDITÓ section on page 4.
3
H
OW TO
U
SE THE
INSTALLATION F
EATURES
C
HANNEL
E
DIT
C HANNEL EDIT makes it easy for you to add or delete channels from the list of channels stored in the TVÕs memory.
VOL
1
MUTE
MEN
U
7
SOU
ND
SLEEP
0
4
SURF
8
VCR
TV MULT
IMED
IA ST
ATUS
/EXIT
ACC
RECO
1 RD
VCR
5
SURR
.
2
6
6
INCR
.
LIST
PRO
GRAM
A/CH TV/VC
3
CC
9
PICT
URE
CLOC
K
POW
ER
3
CH 5
2 7
4
6
Press the MENU button on the remote control to show the onscreen menu.
Press the CURSOR
DOWN button repeatedly until INSTALL is highlighted.
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
Press the CURSOR
RIGHT button to shift the menu to the left. LANGUAGE will be highlighted.
Press the CURSOR
DOWN button repeatedly until the CHANNEL EDIT control is highlighted.
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
Press the CURSOR
RIGHT button to access the
CHANNEL EDIT menu.
Press the CURSOR UP or CURSOR DOWN button to scroll through the list of available channels. Or press the number buttons on your remote control to select a specific channel (for example, press 0 and then 2 to select channel 2).
INSTALL
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
66 SKIPPED
67 SKIPPED
68 SKIPPED
69 SKIPPED
AV1
With the channel you want to edit selected, press the
CURSOR RIGHT button to mark the channel as SKIPPED.
The channel youÕve marked
SKIPPED will not appear when you are changing from channel to channel while watching TV.
NOTE: When you want to add a channel that has been marked SKIPPED, press the
CURSOR UP or CURSOR
DOWN button to highlight the channel; then press the
CURSOR RIGHT button to remove the word SKIPPED.
S
MART
H
ELP
The channels available for you to edit are the ones that the AUTO PROGRAM feature found through a search of your
TV antenna or cable TV signals. Channels not found during the search are marked SKIPPED.
NAME
T he channel NAME feature allows you to list the
ÒcallÓ letters of your favorite stations beside their channel numbers when they appear on the screen. The TV has in memory a list of the 50 most popular channel names (for example, ABC, NBC, FOX, etc.). You also can enter a custom name (up to five characters).
Press the MENU button on the remote control to show the onscreen menu.
Press the CURSOR
DOWN button repeatedly until INSTALL in highlighted.
Press the CURSOR
RIGHT button to shift the menu to the left. LANGUAGE will be highlighted.
Press the CURSOR
DOWN button repeatedly until the NAME control is highlighted.
Press the CURSOR
RIGHT button to highlight the
NAME options area.
P ress the CURSOR
RIGHT button again ; then press the CURSOR UP or
CURSOR DOWN button to scroll through a list of options for the first character (A through Z, 0 through 9). Press the CURSOR
RIGHT button and repeat for the second, third, fourth, and fifth characters.
After you have selected a name for the channel, press the MENU button to save the name in the TVÕs memory.
Press the
STATUS/EXIT button clear the menu from the screen.
to
7
1
VOL
MUTE
MEN
U
7
SOU
ND
SLEEP
0
4
8
VCR
ACC
1
RECO
RD
5
TV
VCR
MULT
IMED
IA ST
ATUS
/EXIT
SURR
.
2
INCR
.
LIST
PRO
GRAM
3
6
9
PICT
URE
SURF
CC
CLOC
K
POW
ER
8
3
CH 5
2
4
6
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
TUNER MODE A
CHANNEL EDIT
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
INSTALL
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
NAME
INSTALL
TUNER
AUTO PROGRAM
CHANNEL EDIT
AutoChron
NAME W-
S
MART
H
ELP
The five characters that the channel NAME feature allows you to input can be letters, a dash character, or the numbers 0 through 9.
WX-
WXY-
WXYZ-
WXYZ3
Up to 5 characters
AutoChron™ utoChron TM can automatA ically set the TVÕs onscreen clock. Because the time is received from a broadcast signal, you must be sure that a cable TV or antenna signal is present before you attempt to use the
AutoChron TM feature.
Press the MENU button on the remote to show the onscreen menu.
Press the CURSOR
DOWN button repeatedly until INSTALL is highlighted.
Press the CURSOR
RIGHT button to shift the menu to the left. LANGUAGE will be highlighted.
Press the CURSOR DOWN button until the AutoChron control is highlighted.
Press the CURSOR UP or CURSOR DOWN button to highlight your correct time zone.
Press the CURSOR
RIGHT button to start the
AutoChron™ feature. Then just follow the onscreen instructions to set the clock.
Press the CURSOR
RIGHT button
Within a few seconds, a menu for choosing your time zone will appear.
to select AUTO.
With your correct time zone highlighted, press the
CURSOR RIGHT button.
Within a few seconds, you will be given the option to choose whether you want to select
Daylight Savings Time.
Press the CURSOR UP or CUSOR DOWN button to navigate through the YES and
NO selection list; then with the item you want to select highlighted, press the CURSOR
RIGHT button.
Follow the onscreen instructions (shown below) to set the AutoChronª time either automatically or manually.
Follow these onscreen instructions to set
AutoChron™ automatically.
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
STORE
PICTURE
SOUND
FEATURES
INSTALL
INSTALL
LANGUAGE
TUNER MODE A
AUTO PROGRAM
LANGUAGE
TUNER
AUTO PROGRAM
CHANNEL EDIT
CHANNEL EDIT
AutoChron
AutoChron
INSTALL
TUNER
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
INSTALL
TUNER
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
SET TIME
AUTO
MANUAL
INSTALL
TUNER
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
TIME ZONE?
CENTRAL
MOUNTAIN
PACIFIC
INSTALL
TUNER
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
DAYLIGHT
SAVING TIME?
YES
NO
Follow these onscreen instructions to set
AutoChron™ manually.
INSTALL
TUNER
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
SET TIME
AUTO
MANUAL
INSTALL
TUNER
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
ENTER TIME
11:00 AM
NOTE: When setting the clock manually, press the number buttons on the remote control to enter the time.
Don’t forget to set AM or PM with the CURSOR UP or
CURSOR DOWN button.
4
INSTALL
TUNER
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
SEARCH FOR
TIME . . .
(Please wait)
12 PBS
INSTALL
TUNER
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
SEARCH FOR
TIME . . .
Time Found
PRESS TO END
INSTALL
TUNER
AUTO PORGRAM
CHANNEL EDIT
AutoChron
NAME
SEARCH FOR
TIME . . .
Time Found
11:00 AM

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Auto Program channel setup
- Channel Edit and Name controls
- AutoChron clock setting
- AutoPicture and AutoSound
- Multiple input options (Antenna, Cable)
- Remote control with various functions
- Multi-language onscreen menu