assembly code / sr056 (4) . sr073 (3) . sr064 (1)
description
The utilitarian Hinge unit is available in various colours and configurations: 1 door,
3 door or 4 door.
assembly contents
1 x hinge unit (Part A)
4 x timber legs (Parts B)
1 x allen key
12 x plastic spring washers
12 x cap screws
Depending on how your product was delivered and packaged some steps in this manual can be skipped as you might receive a fully or partially-assembled product. to assemble, you will need care and maintenance
1 x soft blanket or bubble-wrap
1 x Pozidriv (SupaDriv) PZ screwdriver
2 x people
Go to www.dokterandmisses.com/care for specific instructions on how to care for your product. x 12 x 12 x 1 a b x 4 a a
how to assemble this product b b b b a step 1
Lay the steel body of the Hinge unit
(Part A) upside down on a blanket or bubble-wrap as shown above.
note
Make sure that the doors of the unit are held / taped closed while flipping the unit.
step 2
Unscrew the screws with black washers from the wooden legs (Part B), match the coloured stickers and align the corresponding holes with those on the steel frame.
step 3
Insert screws, together with washers and tighten using the allen key provided. Use a screw driver to hold the screws in the wooden legs in place while tightening.
step 4
Turn the unit over (2 people required) and tighten screws.
note: Tighten screws from time to time.
thank you for recycling
Please support responsible environmental management by recycling product packaging.
we really do care
We make each product with great care and attention to detail.
If you experience any problems with this product, please let us know.
We are always working to improve on our products.
Your feedback is valuable to us.
