LT -3800-5A LED RGB Controller Manual Page 1 of 10
LT-3800-5A
LED RGB Controller
User’s Manual
(Please read this manual carefully before use)
LT -3800-5A LED RGB Controller Manual Page 2 of 10
,
Forward
,
Thanks for choosing our LT-3800-5A RGB Controller. Before installation and usage, we strongly recommend you to read through this manual carefully.
,
After-Sales
,
From the day you purchase our products within a year, if being used properly in accordance with the instruction, and quality problems occur, we provide free repair or replacement services except the following cases:
1. Any defects caused by wrong operations..
2. Any damages caused by inappropriate power supply or abnormal voltage.
3. Any damages caused by unauthorized removal, maintenance, modifying circuit, incorrect connections and replacing chips.
4.
5.
Any damages due to transportation, breaking, flooding water after the purchase.
Any damages caused by earthquake, fire, flood, lightning strike etc force majeure of natural disasters.
6. Any damages caused by negligence, inappropriate storing at high temperature and humidity environment or near harmful chemicals.
7. Product has been updated.
,
Safety warnings
,
1. Please don’t install this controller in lightening, intense magnetic and high-voltage fields.
2. To reduce the risk of component damage and fire caused by short circuit, make sure correct connection
3. Always be sure to mount this unit in an area that will allow proper
4. ventilation to ensure a fitting temperature.
Check if the voltage and power adapter suit the controller
(please select
DC5-24V power supply with constant voltage)
5.
Don’t connect cables with power on, make sure a correct connection and no short circuit checked with instrument before power on.
6.
Please don’t open controller cover and operate if problems occur.
The manual is only suitable for this model, any update is subject to change without prior notice.
LT -3800-5A LED RGB Controller Manual Page 3 of 10
Product Brief
LT-3800-5A RGB controller is a unique DIY version as well as a powerful combination that can control color changes of LED lights with
4-pin 3-loop cables (common anode), built-in 18 modes with touch functional buttons, provided with IR wireless remote control panel, users can control color changes of LED light by pressing the button on the controller or on the remote control panel, very users friendly.
Ⅰ. Technical Specs
LT-3800-5A Constant voltage controller
Input voltage
Max load current
Max load power
Changing mode
Scale level
Static dimming
Dimension
DC5V~DC24V
5A/CH×3
75W /180W/ 360W(5V/12V/24V)
18mode
256 steps per RGB mixing up 4096 colors
L142×W73×H30mm
Package Size L145×W88×H46mm
Weight (G.W) 350g
Ⅱ. Features
1.
Automatic switch from DC5-DC24V;
2.
3.
4.
5.
6.
7.
With 24 Buttons IR Wireless remote control, reliable control distance can reach as far as 10m;
Several DIY Storage Buttons, to record your favorite effect ;
0-100% dimming and 16 levels of static brightness per RGB, can mix 4096 colors.
3-Channel RGB full color control, maximum outputs 5A per
Channel.
256 Grey scales per RGB, color-smooth effect is gentle and accurate.
Can choose changing speed separately and adjust the brightness
LT -3800-5A LED RGB Controller Manual Page 4 of 10
8. of each mode.
Can rest at current color and color depth by selecting PAUSE
9. function.
Working with our LT-3060, can expand power unlimitedly.
Ⅲ. Product Dimension
Dimension of controller
LT -3800-5A LED RGB Controller Manual Page 5 of 10
Dimension of IR remote
Ⅳ. Conjunction diagram
LT -3800-5A LED RGB Controller Manual Page 6 of 10
Ⅴ, Operating instructions
1, Instructions of controller and remote
’s keys:
Instruction of controller
’s buttons
Instruction of IR remote
’s buttons
LT -3800-5A LED RGB Controller Manual Page 7 of 10
2. Detailed key functions
Sign Button
ON /OFF
PAUSE
MODE+
MODE-
SPEED+
SPEED-
BRT+
BRT-
DIY modes
DIY modes of remote
PLAY
Description
Turn on/off the controller
Any button can start the controller at off status.
Press this button will rest at current color, it will continue to change if press again.
Press this button in 3 seconds, the buzzer can be on or off.
Press them to select next mode or back to previous mode (pls refer to the Ⅵ item) , press
MODE+ or press MODE- over 3s to enter cycle mode.
Press them to quicken or slower speed, press
SPEED+ or SPEED- over 3s, current speed is restored to Default status.
Press them to increase or decrease brightness, press any one over 3s, current brightness is restored to Default status.
Press them over 3s, LED flickers twice, then remember current change mode on this button, it can save 4 modes, just press it once then enter into pre-setup mode.
Press them over 3s, LED flickers twice, then remember the current mode on this button, it can save 8 modes, later can reach your pre-setup mode by just pressing it once.
Cycle play the 4 pre-setup modes in controller.
LT -3800-5A LED RGB Controller Manual Page 8 of 10
PLAY+
RGB
Dimming key
Cycle play the 8 pre-setup modes in IR remote controller.
1.Press single R, G, B key continuously to change the brightness of RGB LED.
2. In single R, G or B dimming status, press
BRT+/BRT- key to increase/decrease the brightness.of current LED
Note :
1.The functions of 1-4 DIY keys on the controller are the same with the
1-4 DIY keys on the remote controller.
2. The cycle play buttons can only play the dynamic changing effects, if
DIY reserved a static color, the static color will be skipped when pressing the cycle paly button.
Ⅵ. Tables of changing modes
Sequence
Modes
1 Static red
Description
Normally on red
Remark
Brightness adjustable
2 Static green Normally on green Brightness adjustable
3
4
5
6
7
Static blue
Static yellow
Static purple
Static cyan
Static white
Normally on blue
Normally on yellow
Normally on purple
Normally on cyan
Normally on white
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
Brightness adjustable
LT -3800-5A LED RGB Controller Manual Page 9 of 10
8 3-color Red, green and blue Brightness and skipping 3-color skipping speed adjustable
9 7-color skipping
Red, green, blue, yellow, purple, cyan, white 7-color
Brightness and speed adjustable
10
11
White strobe color shipping
White(with all red, green and blue on) strobe
3-color smooth RGB 3-color gradual changes
Brightness and speed adjustable
Brightness and speed adjustable
12
13
14
15
16
17
18
Full smooth
RG smooth
RB smooth color color color
GB smooth color
White color fade & change
Great cycle
RGB dimming static
All 7-color gradual changes
Red, green 2-color gradual changes
Red, blue 2-color gradual changes
Green, blue 2-color gradual changes white(with red, green
& blue on)gradual bright & fade
All changing modes overlap cycle
0-100% dimming per
RGB
Brightness and speed adjustable
Brightness and speed adjustable
Brightness and speed adjustable
Brightness and speed adjustable
Brightness and speed adjustable
/
16 levels of brightness per RGB
LT -3800-5A LED RGB Controller Manual Page 10 of 10
Ⅷ. Exception Handles
Malfunction Causation
1. No power from plug
Settle
No light
Incorrect color
2. Power supply protection works
3. Incorrect connection or cable loose
4. Incorrect RGB output wire connection
1、 Check the socket
2、 Check the malfunction, re-power on
3、 Check connection
4、 Re-connect RGB wires correspondently
No changes for certain mode
5. Speed is too slow
5、 Press Speed to accelerate
Uneven brightness of
LED between front and rear
6. Output cable is too long
7. Wire diameter is too small
8. Overload beyond power capability
9.
Overload beyond controller capability
6、 Reduce cable or use daisy-chain power
7、 Change wider wire
8、 Change power supply
9、
Add power amplifier