Genius G-Shot PalmDV310 manual

Add to my manuals
34 Pages

advertisement

Genius G-Shot PalmDV310 manual | Manualzz

English

European Regulatory Information

Declaration of Conformity

We, the undersigned,

Company:

Address:

KYE SYSTEMS Corporation

No. 492, Chung Hsin Rd., Sec. 5, San Chung, Taipei

Hsien, Taiwan

Country: R.O.C.

Telephone number:

Fax number:

886-2-2995-6645

886-2-2995-5302

Internet: http://www.geniusnet.com.tw certify and declare under our sole responsibility that the following equipment:

Product Description,

Intended use: Information technology equipment, personal computer peripheral input device, for home and office use

EU/EFTA member states intended for use:

EU: Austria, Belgium, Denmark, Finland, France,

German, Greece, Ireland, Italy, Luxembourg, The

Netherlands, Portugal, Spain, Sweden, United

Manufacturer:

Kingdom, EFTA: Switzerland, Iceland, Liechtenstein,

Norway

KYE SYSTEMS Corporation

Brand: Genius

Model Designators:

G-Shot PalmDV310

are tested to and conform with the following standards:

EN 55022

EN 55024 and therefore complies with the essential requirements and provisions of the

Electromagnetic Compatibility Directive 89/336/EEC.

English

Welcome

This is a high-quality yet affordable Digital Video Camera that allows you to create, edit, share and send photos to your friends and family.

This Digital Video Camera is also not just a Digital Camera. It lets you record short segments of movies or voice. What's more, it can be used as a Web camera when you connect it to a computer.

This easy-to-follow manual shows you how to use your new Digital Video Camera and install all the softwares included in the software CD-ROM. You'll find clear instructions on how to take pictures, record movies and voice, and use your Digital Video Camera as a PC camera.

Guidelines on how to use the software to transfer photos and movie segments from the

Digital Video Camera into your computer are also provided.

Whenever you want to send snapshots or short video clips via mails, create exciting photo albums, produce movies, or even chat with your friends or family face to face over the

Internet, this Digital Video Camera gives you all the tools that you need.

-1-

English

Contents

1.Attention

Safty Precautions

Before Using Your Digtial Video

Camera

Operational Cautions

3

3

3

4

Package Contents 4

2.Getting to Know Your Digital

5 Video Camera

Digital Video Camera

Controls

Front side View

5

5

Left Side View

Right Side View

5

5-6

Top View

Memory Card

GAME

Movie Mode

Status Identifier

Recording Video

Recording Video with

Self-Timer

Voice modes

Status Identifier

Record Voice

Capture modes

Status Identifier

Shooting Photos

To take Close-up pictures

To take portrait and distant

6

3.Getting Started 7

Preparing Your Digital Video

Camera

4.Start Using Your Digital

Video Camera

7

Function Tree

Setup Mode

Date /Time setting

Formatting the

8

8

9

9

10

10-12

12

13

13

13

14

14

14

14-15

15

15-16

16

Pictures

Digital Zoom

Snapshot Menu

White Balance Setting

Image Size Setting

Image Quality Setting

Exposure Value Setting

Self-Timer Setting

To Take a picture with self-timer 18

Date Stamp setting

Flash Function

Photo/Movie/Voice Playback

Mode

Status Identifier

19

19

20

20

16

16

16

16-17

17

17

18

18

Image Playback

Movie Playback

Voice Playback

Album Function

Playback Menu

Deleting a Single Photos

Deleting All Photos

Image protect

Slide Show

DPOF Function

5.Installing Driver 28

6.Connecting Your

Computer 28

Using the Digital Video Camera as a Web camera or a Mass Storage drive 29

Connecting to Your TV/VCR 30

Downloading Images/Video clips 30-31

20

21

21

21-22

22

22

23

24-25

25-26

26-28

7.Installing the Applications for PC 31-32

Appendix: Digital Video Camera

Specifications 32-33

-2-

English

1. Attention

Please read through this manual carefully before using the Digital Video Camera and follow the instructions to avoid damages caused by improper operations.

Safty Precautions

The software CD-ROM packaged with the Digital Video Camera is for PC only. Playing this

CD-ROM on a stereo or CD player may cause damages to it.

This Digital Video Camera is a precision electronic device. Do not attempt to service this

Digital Video Camera yourself, opening or removing covers may expose you to dangerous voltage points or other risks.

Do not expose this Digital Video Camera under direct sunlight to avoid causing a fire.

Before Using Your Digital Video Camera

Try to take some pictures before you perform the formal recording.

Before taking pictures with this Digital Video Camera in any important occasion (such as a wedding ceremony or an overseas trip), do test the Digital Video Camera beforehand to ensure that it functions well. Any additional loss caused by the malfunction of this product

(such as costs of photography or any loss of benefit generated by the photography) is not the responsibility of our company and no compensation will be given for it.

Copyright information

Unless agreed by the right owner, all the pictures taken with this Digital Video Camera cannot be used in violation of copyright law. Moreover, when "No Photography" restriction is placed on site, you cannot record any live performance, improvisation or exhibits even for personal purpose. Any transfer of pictures or memory card with data must be conducted under the constraints of copyright law.

Notes on the LCD (Liquid Crystal Display) monitor

1.If the liquid contacts the skin:

Please wipe dry the skin with a cloth and wash with large amount of water.

2.If the liquid gets in the eye:

Please immediately rinse with fresh water for at least 15 minutes and then consult with a doctor to receive treatment as soon as possible.

3.If anyone accidentally swallows the liquid:

Please rinse the mouth with water, drink large amount of water and receive treatment as soon as possible.

-3-

English

Operational Cautions

This product consists of intricate electrical parts. To ensure the photography normally, do not drop or hit the Digital Video Camera when taking pictures.

Avoid to use or place the Digital Video Camera in the following locations:

1.Damp and dusty places.

2.Sealed vehicles or places exposed to direct sunlight or places subject to extremely high temperatures or heat.

3.Violently turbulent environment.

4.Locations full of smoke, oil fumes or steams.

5.Locations subject to strong magnetic field.

6.Raining or snowing environment.

Do not open the battery cover when the power is on.

If water has entered the Digital Video Camera, immediately turn the power off and remove the batteries.

How to maintain your Digital Video Camera:

1.If lens or LCD monitor surface is dirty, please use lens brush or soft cloth to wipe clean instead of touching them with your fingers.

2.Do not use any solid object to hit the Digital Video Camera to avoid scratching the lens, or LCD monitor surface.

3.Do not use any detergent or volatile solution, which will subject the Digital Video Camera case and paint to solving or distortion. Use soft cloth only.

Package Contents

Please check if the following items are in the package when purchasing this product.

● CD-ROM

(Driver & Application Software)

● Pouch

● Wrist Strap

● 2 x “AA” Alkaline Batteries

● USB Cable

● AV OUT Cable

● User's Manual

● Quick Installation Guide

Note:

Accessory and components may vary by different retailer.

-4-

English

2. Getting to Know Your Digital Video Camera

Digital Video Camera Controls

Front Side View

Shutter-Press the Shutter button to take pictures in Capture mode, and to start & stop recording movies(voice) in Movie(Voice) mode.

Self-timer LED

Flash

Lens

Microphone

Left Side View

Set Button-Press the button to get into the

Setup mode.

Mode Switch-You can select the following modes by sliding this Mode switch:

1. Capture Mode

2. Movie Mode

3. Voice Mode

Battery Cover and SD Card slot

Right Side View

Macro Switch-The switch is used for

“Normal” and “Macro” modes switching. icon will appear on LCD display when the

Macro mode is selected.

Terminal Compartment

Located on the left side of the Digital Video Camera are the two ports for attaching the

-5-

English

following cables: Audio/Video Output, USB. These ports will enable you to attach the appropriate cables from the Digital Video Camera to your computer or TV/VCR.

Audio/Video Output Port- Used to connect your Digital Video Camera to a TV/VCR for viewing images/movies stored in your Digital Video Camera.

USB Port - Used to connect your Digital Video Camera to the computer via the USB cable. You can then transfer photos and recorded movies(voice) from the Digital Video

Camera to your computer, or use the Digital Video Camera as a Web camera.

Top View

Speaker

Color Liquid Crystal Display

Strobe LED-When the strobe is charging, this

LED blinks, it will light on when the strobe is ready, and turns off when the strobe is turned off.

Power LED-As the Digital Video Camera power turned on, the power LED will light . It blinks and goes off when batteries exhaust.

Power Button-Press the button one second,then the Digital Video Camera will power on/off.

Enter Button- The multi-function key set performs different operations in each mode, e.g. set , select , ok.

Playback Button-Press the button to get into the playback mode. The playback button can be performed in “Capture”,”Movie”and”Voice” modes. Simply press the button again to leave playback mode and enter the mode selected by mode switch.

Display Button - The Display button provides 3 display types of the LCD (such as

Normal / Full Screen / Off ) in" Capture", "Playback" and "Movie" modes.

Menu Button-You can enter detail Menu functions in "Capture" , "Playback" and "Movie" modes.

Battery power level

Full battery power

Medium battery power

Low battery power

Battery exhausted

-6-

English

3. Getting Started

Preparing Your Digital Video Camera

●Step 1 Insert two "AA" batteries into the battery compartment .

●Step 2 When inserting SD/MMC memory card, follow the icon shown in the compartment to insert or remove the card push-and-pull.

Then, push the memory card all the way into the memory compartment and close the battery door, push the battery door down and then slide it closed.

NOTE

y

When memory card is inserted, internal 16MB flash memory will be disabled no matter card is full or not.

●Step 3 Attach the wrist strap to the strap holder at the side of the Digital Video Camera as illustrated in the picture below.

-7-

English

4. Start Using Your Digital Video Camera

●Step 1 Press Power button to turn on the Digital Video Camera. And Power LED will light on.

●Step 2 The LCD Display will be turned on automatically.

NOTE

y

The LCD Display will be turned off automatically if you do not operate Camera over 30 seconds, the

Camera will be turned off automatically if you do not operate it over 90 seconds.

Function Tree

-8-

English

Setup Mode

Press the Set button to enter the setup menu.

You can configure the basic settings for Digital Video Camera:

1.Beep-Sound effect On/Off.

2.Date/Time-Date & time settings.

3.Language-Language setting: English/Italiano/Francais/Deutsch/Espanol/日本語/繁體中文

/简体中文.

4.Format-Formatting the internal memory or memory cards.

5.Default-Reset to preliminary settings.

6.TV-TV output format setting : NTSC/PAL

7.Frequency-Fluorescent frequency : 50Hz/60Hz

8.GAME-Tetris/Racing

Date /Time setting

●Step 1 Press to move to the Date/Time option.

●Step 2 Press Enter button to bring up the menu.

●Step 3 Press minute.

to adjust Date/Time; press to select year, month, day, hour or

●Step 4 Press Enter button to save your settings and then exit.

-9-

English

Formatting the Memory Card

You are suggested to format your SD/MMC memory card before using it to store pictures.

●Step 1 Press to move down to the Format option.

●Step 2 Press Enter button to bring up the"Cancel/OK" Menu.

●Step 3 To format the memory card, select “ok” on the screen and then press the Enter button. You will hear a ring sound when you press it.

●Step 4 The Digital Video Camera then begins formatting the memory card. Wait for the formatting process to finish.

●Step 5 After the memory card has been formatted; all the pictures and datas in the memory card will be deleted. And there is a message showing: No Picture.

GAME

●Step 1 Press to move down to the GAME option.

●Step 2 Press Enter button to bring up the"Cancel/OK" Menu.

●Step 3 Press to select “Tetris” or “Racing”.

●Step 4 Select the “Tetris” and press ENTER button to come in “Tetris”.

●Step 5 Select the “Racing” and press ENTER button to come in “Racing”.

-10-

English

Game Manual

. Tetris operation manual

Operation:

Display button

Left button

Right button

Down button

Menu button:Pause the game and display the game menu

Start the Tetris

Come in the Tetris menu

Start: Select the “start” and press OK button to start the new game

Level: In the level menu have three type level for the player

Mode:MODE0 have eight type object, MODE1 have twelve type object and MODE2 have fifteen type object in the game

Score: High score

Pause the tetris

-11-

English

Press the Menu button to pause the game and display the game menu CONTINUE:Select the “Continue” and press OK button to the continue the game.

NEW GAME: Select the “NEW GAME” and press OK button to the restart the game.

ESC: Quit the game and return to the Setup menu.

If the game is over the player can select the “NEW GAME” to start the new game or select the “ESC” to quit the game.

. Racing operation manual

Operation:

Up button

Left button

Right button

Down button

Menu button:Pause the game and display the game menu

Start the Racing

Select the “start” and press OK button to start the new game ,The Racing game have six grade,the one grade have two minute to complete.Some time in the game playing will appear a gold car , if player touch the gold car then add a life.

Pause the tetris

Press the Menu button to pause the game and display the game menu

Start: Start the new Racing Car game

TopScore: The highest Score.

Control: Intruduce the control .

Level: Select the game level

Movie Mode

Slide the Mode switch to select Movie Mode

-12-

English

Status Identifier

Movie Mode Indicator

Movie recording time

Image Number

Battery Status Indicator

Memory Indicator

Recording Video

With your Digital Video Camera, you can record short sequences of video at a rate of 15 frames per second. The Digital Video Camera stores video in AVI format.

●Step 1 Press once the Shutter button to start recording video. You will see live views of the subjects or scenes you are recording on the

LCD Display.

●Step 2 And while recording, a red icon blinks on the upper left side of the LCD Display and the recording time counts up. The icon stops blinking and becomes green after you terminate the recording process.

●Step 3 To stop recording, press the Shutter button again.

Recording Video with Self-timer

You can use Self-timer function for recording video clips, press Menu button to switch

Self-timer on or off. When Self-timer set on, the icon will appear on center of LCD panel.

Self-timer function is same as in Capture Mode.

Image quality setting

Its operating is same as Capture Mode.

-13-

English

Voice mode

With your Digital Video Camera,you can record voice just as a recorder. It can record music or dialog if you like. The file of voice is standard Microsoft WAV format. The file can be broadcasted on the Digital Video Camera or PC, and you can broadcast on TV but it must connect to TV through AV cable first.

Status Identifier

Voice Icon

Record Length

Image Number

Memory Indicator

Battery Indicator

Record Voice

Slide modes switch to the Voice

●Step 1 Press once the Shutter button to start recording voice.

●Step 2 And while you are recording, an red icon blinks on the upper left side of the LCD

Display. And the icon disappear after you terminate the recording process. And the recording time counts up as you continue shooting.

Step 3 Press Shutter button to stop the voice recording.

The voice playback function is in Playback mode.

Capture Mode

-14-

English

Slide Mode switch to Capture Mode

Status Identifier

Date Stamp (Default is not displayed).

Battery Status Indicator:

(Full) Half

Memory Card Status:

Low

Use Internal Memory

Empty

Internal Memory Full

Use SD Card SD Card Full

Image Number.

Self-timer Indicator.

EV Level

White Balance: Auto, Sunny, Tungsten,

Image Quality: Fine, Normal, Basic.

Fluorescent.

Image Size: 5.5M(2720x2040), 3M(2048x1536), 2M(1600x1200), 1.3M (1280x960).

Zoom Lever: (Normal), (4.0x Zoom).

Macro Indicator

Capture Mode Indicator

Flash Mode: (OFF), (Auto),

Warning:

Card Lock , the sign shows up blinking as the Shutter Button pressed with the memory card locked physically.

Memory Full , the sign shows up blinking when the internal memory or the inserted memory card is full. Please notice that the capturing functions will not access when the Warning signals appear.

Shooting Photos

-15-

English

Taking pictures with your Digital Video Camera is a snap. Just point and shoot!

●Step 1 Make sure the Digital Video Camera is turned on.

●Step 2 Use the LCD display to frame the subjects you want to photograph.

The LCD will turn off until it is stored in the memory. When the LCD Display resume, you may focus your next target to take the next picture.

●Step 3 Press the Shutter button to take a picture.

To take close-up pictures

●Step 1 Push the Macro switch downwards to select Macro mode .

The Macro indicator on the LCD display will show , allowing you to take pictures at a closer range (between 25~30cm).

●Step 2 To take pictures, follow the steps in the "Shooting Photos" section.

To take portrait and distant pictures

●Step 1 Push the Macro switch upward. This sets the Digital Video Camera to normal mode, and the icon on the LCD panel will disappear, allowing you to take pictures of people or sceneries which distance 1.2m~infinity.

●Step 2 To take pictures,follow the steps in the "Shooting Photos "section.

Digital Zoom

The Zoom Lever hides normally, press to enter Zoom in / Zoom out functions, the framed image can be zoomed between 1.0X ~4.0X.

Snapshot Menu

In Capture mode, press Menu button to enter Snapshot Menu:

White Balance Setting

●Step 1 Use to select WB on the menu bar.

-16-

●Step 2 Press Enter button to enter White Balance setting menu.

English

●Step 3 You can use to select Auto, Sunny, Tungsten, and Fluorescent.

●Step 4 Press Enter button to confirm your selection, or press Menu button to cancel it.

Image Size Setting

●Step 1 Use to select the image size icon on menu bar.

●Step 2 Press Enter button to enter Image Size setting menu.

●Step 3 You can use to select: 1.3M : Fine quality, 1280*960 pixels, 2M : Best quality, 1600*1200 pixels, 3M : 2048*1536 pixels, 5.5M : 2720*2040 pixels(firmware interpolation)

●Step 4 Press Enter button to confirm your selection, or press Menu button to cancel it.

Image Quality Setting

●Step 1 Use to select on the menu bar.

●Step 2 Press Enter button to enter Image Quality setting menu.

●Step 3 You can use to select Fine, Normal and Basic

●Step 4 Press Enter button to confirm your selection, or press Menu button to cancel it.

-17-

Exposure Value Setting

●Step 1 Use to select EV on the menu bar.

●Step 2 Press Enter button to enter Exposure Value setting menu.

English

●Step 3 You can use to set -2EV, -1.5EV, -1EV, -0.5EV, 0EV, +0.5EV, +1EV,

+1.5EV,and +2EV.

●Step 4 Press Enter button to confirm your selection, or press Menu button to cancel it.

Self-Timer Setting

●Step 1 Use

to select on the menu bar.

●Step 2 Press Enter button to enter Self-Timer setting menu.

●Step 3 You can use to select ON, Off.

●Step 4 Press Enter button to confirm your selection, or press Menu button to cancel it.

To Take a picture with self-timer

When the Self-timer function set On , a Self-timer icon at center of the LCD display appears.

When shutter button pressed, the self-timer icon disappears while a number appears counting down from 10 with beep sounds and the self-timer LED blinks.

-18-

After count down to zero, the Digital Video Camera will take one picture.

Date Stamp setting

●Step 1 Use to move to on the menu.

●Step 2 Press Enter button to enter Date Stamp setting menu.

English

●Step 3 You can use to select ON, Off.

●Step 4 Press Enter button to confirm your selection, or press Menu button to cancel it.

NOTE

y After setting date stamp on, the date will display on LCD panel, and stamped on captured pictures later.

Flash function

Flash function is active Only in Capture Mode, the Flash has two status, if press Right button , it can sequence into Auto and OFF status.

Right button

Off Auto

-19-

English

Photo/Movie/Voice Playback Mode

Press the Playback button to Playback Mode

Status Identifier

Image Number.

Image Total.

Movie file Indicator.

Movie play Length

Locking Indicator

Battery Indicator

Image Playback

Press to playback the previous image or the next image.

Press Enter button to the image zoom mode

Press Up button to zoom in the image

Press Down button to zoom out the image

In this mode press the menu button into the pan modes

In this mode , you can press [ ]、[ ]、[ ]、[ ] to preview the any partly image.

Press Enter button to quit the zoom mode or pan mode.

-20-

English

Movie Playback

When it comes to movie file , the movie indicator appears on the up-left corner of screen , by pressing the Enter button you can start playing the movie.Press Enter button to stop playing movie.

In movie playback you can press Up button or Down button to adjust volume,the volume indicator will appears on down-right corner of screen,and press Menu button to pause.

Voice playback

When it cames to voice file,the voice icon indicator appears on screen,by pressing the

Enter button you can start playing the voice.Press Menu button to pause play process.

Press Enter button to stop playing voice.

In voice playback process, press the [ ] 、[ ] button to adjust volume and then the volume appears on screen left side ,but press [ ]、[ ] button to adjust the play time

Album Function

●Step 1 Enter Playback Mode.

●Step 2 Press Left button to enter 3-frame Album function , which shows 3 images per page with a mid-size preview window. Use to change previewing images . (Pressing

ENTER can return to Playback Mode which displays selected image with full screen.)

-21-

English

●Step 3 Press Left button again to enter 3x3 Album, which supports to playback 9 images in a page, then use to select image.

●Step 4 Press ENTER to playback selected image with full screen .

Playback Menu

Deleting Photos

You can choose to delete a single photo or all the photos stored in the Digital Video Camera.

Deleting a Single Photo

●Step 1 Make sure that the Digital Video Camera is in playback mode.

Example: Move to the picture which is going to be deleted.

●Step 2 Press the Menu button to enter Playback Menu and then move to DEL with

If press Menu button, the screen will return to step 1.

●Step 3 Press the Enter button to bring up Delete menu: Delete One and Delete All.

If press Menu button, the screen will return to step 2.

-22-

English

●Step 4 Press Enter button to confirm Delete One, then bring up current picture with Delete menu: Cancel and Photo Number.

If press Menu button, the screen will return to step 2. Press can select the photo of you would to delete.

●Step 5 Press Enter to confirm your deleting operations. The image shown on the display will then be deleted and the previous image comes up.

If press Menu button, the screen will return to step 2.

●Step 6 Select Cancel to stop deleting operation and go back to the Playback Menu.

Deleting All Photos

You may also choose to delete all the photos if the memory is already full and you want to free up the space to take more photos. But before you remove all photos, remember to transfer them to your computer.

●Step 1 Make sure that the Digital Video Camera is in playback mode.

●Step 2 Press the Menu button to enter Playback Menu.

If press Menu button, the screen will return to step 1.

●Step 3 Press the Enter button to bring up Delete menu: Delete One and Delete All, If press Menu button, the screen will return to step 2.

●Step 4 Press to select the Delete All option on the menu screen.

-23-

English

If press Menu button, the screen will return to step 2.

●Step 5 Press Enter button to confirm Delete All, then bring up current picture with Delete menu: Cancel and Delete All.

●Step 6 Press to select the Delete All option on the menu screen, and then press

Enter button to confirm the erasing operation again.

If you change your mind and do not want to continue deleting all the pictures, press to select Cancel on the menu screen. Then press the Enter button. All your pictures will be retained.

●Step 7 After all the pictures have been deleted, there is a message showing: No picture

Image protect

Perhaps, you hope some images will not be deleted by accident; you can choose to protect specific photos taken in the Digital Video Camera.

●Step 1 Press the Menu button to enter Playback Menu.

If press Menu button, the screen will return to step 1.

●Step 2 Use to select

-24-

English

●Step 3 Press Enter button to bring up Protect Menu.

If press Menu button, the screen will return to step 3.

●Step 4 Press to select one image for protection.

●Step 5 Press the Enter button to protect current image, then icon will appear on right top corner of the image that you selected. This means the image has been protected.

●Step 6 If current image had been protected, you can press the Enter button to unprotect it, and then icon will disappear on right top corner of the image that you selected. This means the image protection had been disabled.

If press Menu button, the screen will return to step 3.

Slide Show

You can slide show all pictures previously taken with the Digital Video Camera.

●Step 1 Use to move to

●Step 2 Press Enter button to bring up Slide Show Menu: Cancel and Start.

If press Menu button, the screen will return to step 1.

●Step 3 Press to select the Start on the menu screen, and then press Enter button to slide show all of your pictures.

●Step 4 Press Enter button to stop slide show.

-25-

English

DPOF Function

Selecting DPOF option in Playback Menu can directly send your selected photo to the compatible printers that read DPOF (Digital Print Order Format) files.

●Set All Pictures to DPOF file

●Step 1 Press the Menu button to enter Playback Menu.

If press Menu button, the screen will return to step 1.

●Step 2 Use to move to DPOF

If press Menu button, the screen will return to step 1.

●Step 3 Press Enter button to bring up DPOF Menu: Set All and Set One.

If press Menu button, the screen will return to step 2.

●Step 4 Press to select Set All on the menu screen, and then press Enter button to set all of your pictures, which would indicate print number 1 only, to DPOF files unless specific picture marked from following Set Single Picture process

-26-

English

NOTE

y

All pictures, which had not been set to DPOF file, will be set to DPOF file, and print number is 1

You can reset all DPOF pictures by select Reset All and then press Enter Button.

Set Single Picture to DPOF file

●Step 1 Press the Menu button to enter Playback Menu.

If press Menu button, the screen will return to step 1.

●Step 2 Use to move to DPOF

If press Menu button, the screen will return to step 1.

●Step 3 Press Enter button to bring up DPOF Menu: Set All and Set One.

If press Menu button, the screen will return to step 3.

●Step 4 Press to select Set One option on the menu screen, and then press Enter button to enter menu for setting single picture to DPOF file.

●Step 5 Press to select single picture, use to adjust print number, number zero means this picture is not set in DPOF file.If come to the last file press will return to the first file.

●Step 6 After setting single picture to DPOF file, press Enter button to return to Step 3.

-27-

English

5. Installing Driver

You can use the PC Camera and Mass Storage functions of the camera via PC. To install the proper camera driver, perform the following:

●Step 1 Insert the software CD-ROM supplied with the package into the CD-ROM drive.

●Step 2 The Auto-run program will be executed and the welcome screen appears:(If your

CD-ROM drive doesn't support the auto-run function. Please double press on the

"My Computer" icon on the desktop. Double press the CD-ROM drive icon and press the InstallMgr.exe file in the root directory.

●Step 3 Press on the drivers to install them, and the following screen will appear :

●Step 4 Press Next to continue the setup program. After the camera driver installed successfully, a message will appear on the screen as following:

●Step 5 Press Finish to restart the computer and finish the driver installation.

6. Connecting Your Computer

You need to connect the Digital Video Camera to your computer's USB port to transfer photos into your computer. This section shows how you can connect the Digital Video

Camera to your computer.

You must install the Digital Video Camera Driver from the software CD-ROM before connecting to ensure your computer functions properly with USB. See the section

"Installing Software" for details on how to install the driver.

-28-

English

System Requirements (Windows)

Pentium 200 MHz or higher

Windows 98SE/Me/2000/XP

64MB RAM

128MB hard disk space

24X CD-ROM drive

Available USB port

Using the Digital Video Camera as a Web camera or a Mass

Storage drive

When you connect Digital Video Camera to your computer, you can use it as a Web camera or a Mass Storage drive. You can then join video conferencing sessions on the Internet with your Digital Video Camera. You need to install the Digital Video Camera Driver and required application softwares from the software CD-ROM before you can start using it as a

Web camera. See the section "Installing Software" for installation instructions.

Using the Digital Video Camera as a Web camera, it also lets you capture video directly into your computer and editing or enhancing your videos. See the section

"Installing Software" for installing instructions.

●Step 1 Make sure the Digital Video Camera loads two ”AA” batteries in the compartment.

●Step 2 Connect the smaller end of the USB cable into the USB port of your Digital Digital Video Camera.

NOTE

y Make sure to plug-in USB cable in right direction gently to avoid possible damage to USB connector.

●Step 3 Connect the other end of the USB cable to the USB port located on the back of your computer.

The Digital Video Camera’s LCD Panel will turn on and enter

PC Connection Menu

-29-

English

●Step 4 Press to select Mass Storage or PC Camera option on the menu screen, and then press Enter button to enter menu for Using the Digital Video Camera as a Web camera or a Mass Storage drive.

Connecting to Your TV/VCR

Connect your Digital Video Camera to a television if you want to have a larger view of your photos.

●Step 1 Connect the black colored plug of the Audio/Video output cable into the

Audio/Video out port in the Terminal Compartment on the left side of the Digital Video

Camera.

●Step 2 Connect the other end of the audio(the white plug) and video(the yellow plug) output cable to the Audio-in and Video-in plug on your TV/VCR.

●Step 3 On your television, select the channel for auxiliary Audio/Video input.

NOTE

y

Locate the Audio/Video ports on your individual TV/VCR and insert the video output connector into the Video port. y

Channels may vary by manufacturers; refer to your VCR's operating manual.

Downloading Images/Video clips

When the camera is turned on and connected to your computer, it is considered as a disk drive, just like a floppy disk or CD. You can download

(transfer) images/video clips by copying them from the “removable disk” (“untitled” disk on a

Macintosh) to your computer hard drive or to another kind of disk.

Windows-

Open the "removable disk" and subsequent folders by double clicking on them. Your images

-30-

English

are inside these folder(s). Select the images that you want, then choose "Copy" from the

"Edit" menu. Open the destination location (folder) and choose "Paste" from the "Edit" menu.

You may also drag and drop image files from the camera to a desired location.

NOTE

y Memory card users may prefer to use a memory card reader (highly recommended). y

Before playing Video Clips(*.AVI file) ,make sure your PC has been installed with

DirectX8.0 or higher, and installed sound effective card into you computer

7. Installing the Applications for PC

Install Arcsoft Software (Take Photo Impression Installation for example)

●Step 1 Insert the software CD-ROM supplied with the package into the CD-ROM drive.

●Step 2 The Auto-run program will be executed and the welcome screen appears:

(If your CD-ROM drive doesn't support the auto-run function. Please double press on the

"My Computer" icon on the desktop. Double press the CD-ROM drive icon and press the

InstallMgr.exe file in the root directory.

●Step 3 Press the Arcsoft PhotoImpression to install, and the screen will appear as following:

●Step 4 Select the language for installation. press Enter button to confirm your selection.

●Step 5 You will see the Welcome screen. Press Next to continue.

●Step 6 Enter Software License Agreement window. Please press Yes to continue installation.

-31-

English

●Step 7 Please follow the instructions of installation Wizard to select a destination folder and components you need.

●Step 8 Please select the program folder you want to install.

●Step 9 When the installation is completed, the window below will appear. Press Finish to end the installation.

Appendix: Camera Specifications

Lens : f=9.6 mm

Image Sensor : 3.0 mega pixels CMOS sensor

-32-

English

Aperture: F/3.0

Sensitivity : ISO 100

White Balance : Auto, Sunny, Tungsten, Fluorescent.

Shutter: Electrical

Shutter Speed : 1/4 sec. ~ 1/2000 sec.

Storage Media : 16MB Internal Flash Memory and SD / MMC Card Slot (supports max.

512MB card)

Image File Format : JPEG for Still Image; AVI for Motion Image

Image Resolution :

2720x2040(Firmware Interpolation Technology)

2048 x 1536

1600 x 1200

1280 x 960

Digital Zoom : 10-Step 4X Digital Zoom

Focal Range : Standard: 1.2m ~ Infinity Macro: 25 ~ 30cm

Self-timer : 10 sec. delay

PC-CAM Mode : 20~30 fps. (320 x 240) ;15~25 fps. (640 x 480)

Flash Mode : Auto,Off

AV-OUT : NTSC / PAL options

PC Connection : USB (Ver. 1.1)

Movie File : Recording continuous movie file with 320 x 240 format:

Internal 16MB memory

Fine Normal Basic

80 Seconds 120 Seconds 200 Seconds

● Voice File: 61 Minute

Recordable Image Numbers (16MB) :

16MB

Fine 24 16

Normal 32 22

9 6

14 9

Basic 44 28 19 11

Power Supply : 2 x “AA” alkaline Batteries

Dimensions : 82 x 82 x 32 mm

Weight : About 120g (batteries excluded)

* Design and specifications are subject to change without notice.

-33-

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Questions and Answers

What are the illumination conditions for taking photos with the Genius PALM DV310 digital video camera?
The Genius PALM DV310 digital video camera offers an auto flash function to adjust the lighting conditions automatically.
What power source does the Genius PALM DV310 digital video camera use?
The Genius PALM DV310 digital video camera operates on two "AA" alkaline batteries.
How can I transfer photos from the Genius PALM DV310 digital video camera to a computer?
To transfer photos from the Genius PALM DV310 digital video camera to a computer, connect the camera to the computer using the provided USB cable.
Does the Genius PALM DV310 digital video camera have a self-timer function?
Yes, the Genius PALM DV310 digital video camera has a self-timer function that allows you to set a delay before the camera takes a photo.
How can I adjust the image quality of the photos taken with the Genius PALM DV310 digital video camera?
The image quality of the Genius PALM DV310 digital video camera can be adjusted through the 'Image Quality' setting in the camera's menu.
What is the Genius PALM DV310 digital video camera's default image size setting?
The default image size setting for the Genius PALM DV310 digital video camera is 640x480 pixels.
How do I enable the date and time stamp on photos taken with the Genius PALM DV310 digital video camera?
To enable the date and time stamp on photos taken with the Genius PALM DV310 digital video camera, go to the camera's 'Setup Mode' menu and select the 'Date Stamp' option.

Related manuals

Download PDF

advertisement