Bravo IND-1035 User manual

Thank You for purchasing the
IND-1035
3.5” Single DIN DVD/CD Player
With 180watt AM/FM Tuner
USER MANUAL
V1.2
Bravo View Technology
19917 HARRISON AVE
WALNUT, CALIFORNIA 91789
United States of America
909-869-0699
www.bravoview.com
Safety Precautions
1. Only connect the unit to a 12-volt power supply with negative
grounding.
5. Never expose this unit, amplifier, and speakers to moisture or
water for preventing electric sparks or fires.
2. Never install this unit where the operation & condition for safety
driving is restrained.
6. Please don't change the fuse on the power cord without
professional guidance, using improper fuse may cause damage to
this unit or even cause fire.
PTY
OK
AMS
TA/
AF
PTY
OK
AMS
TA/
AF
MUTE
OK
MUTE
MUTE
OK
OK
MUTE
OK
3. Never use the video display function in the front when driving to
prevent the violation of laws & regulations and also to reduce the
risk of traffic accident except using for rear view video camera.
7. Please power off this unit at once and send it back to the aftersales service center or the dealer/distributor you purchased
from if one of the following symptoms is found:
(a). No audio output;
(b). No image output;
(c). Water or other obstacle
enters the unit;
(d). Smoking;
(e). Peculiar smell.
4. To ensure safe driving, please adjust the volume to a safe
& comfort level in case of emergency situations.
PTY
OK
AMS
TA/
AF
PTY
OK
AMS
MUTE
TA/
AF
OK
MUTE
MUTE
OK
OK
MUTE
OK
Safety Information
Contents
Warning
Safety Precautions.................................................1
Safety Information..................................................2
Faceplate Control...................................................3
Remote Control.................................................. 4-5
Getting Started.......................................................6
USB/SD/MMC/MP3 Playback.................................7
General Operation..................................................8
Rotary Knob Menu............................................ 9-11
Radio....................................................................12
DVD & AV IN Mode..............................................13
Radio and Clock...................................................13
Disc Playback.......................................................14
Disc Playable........................................................14
Audio/Video/Picture File Playback........................15
Track Playback............................................... 16-17
DVD Playback......................................................18
DVD Setup............................................................19
DVD System Setup......................................... 19-20
DVD Language Setup...........................................21
DVD Audio Setup.................................................22
DVD Video Setup.................................................23
Electrical Connections..........................................24
Installation Guide..................................................25
Anti-Theft System.................................................26
Troubleshooting....................................................27
Specifications.......................................................28
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
Caution
This product is a CLASS 1 LASER PRODUCT. Use of controls or adjustments
or performance of procedures other than those specified herein may result in
hazardous radiation exposure. Do not open covers and do not repair yourself.
Refer servicing to qualified personnel.
Two Laser Products
Wave length: CD: 780nm DVD: 650nm
Laser power: No hazardous radiation is emitted with safety protection.
To reduce the risk of fire electric shock, and annoying interference, use only the
included components.
Disc Notes
• Playing a defective or dusty disc can cause dropouts in sound.
• Hold discs as illustrated.
• Do not touch the unlabeled side.
• Do not attach any seal, label or data protection sheet to either
side of a disc.
• Do not expose a disc to direct sunlight or excessive heat.
• Wipe a dirty disc from the center outward with a cleaning cloth.
• Never use solvents such as benzine or alcohol.
• This unit cannot play 3-inch (8cm) discs.
•Never insert a 3-inch disc contained in the adapter or an irregularly shaped CD.
The unit may not be able to eject it.
To provide a clear demonstration and an alternative
for easy understanding of the operation of this
unit, graphic illustration was used. However, this
illustration is not necessary printed as the actual
image found on the unit.
Faceplate Control
Power on/off: Press
to turn on/off the unit.
1
2
3
4
5
6
Faceplate open
Display switch/Time adjust
Button 1: Play/Pause
Button 2: Intro play
Button 3: Track repeat play
Button 6: - DVD audio channel
- VCD audio channel L/R/ST
- Folder down (USB/SD/MP3 Disc)
7 Button 5: - Video system PAL/NTSC/AUTO
- Folder up (USB/SD/MP3 Disc)
8 Button 4: Track random play
9 Button 1~6: Radio preset: Press to listen to a preset
station, and hold for more than 2 seconds to store station.
10 Mute
11 Power on/off
12 - Rotate the knob to adjust volume level.
- Press to select BAS/TRE/BAL/FAD/BRI/CON/SAT,
-R
otate the knob to adjust level.
13 - Radio
- Disc (When disc inserted)
- USB (When USB inserted)
- Card (When SD/MMC inserted)
- AV IN (External peripheral could be connected to this unit
via rear RCA Video Input & front 3.5mm AUX IN [for Audio])
The auxiliary input allows you to connect a portable CD, MP3,
MiniDisc, video game or computer to the receiver.
14 - Band switch: FM1→FM2→FM3→AM1 (MW1)→AM2 (MW2)
- Stop
15 3.5 inch TFT display
16 Loudness
17 AUX in hole
18 Remote sensor
MON
OK
AMS
LOU
19 - Radio tune
- Track skip/seek
- Last track (DVD,CD mode)
- Fast rewind (DVD,CD mode，press more than 2 seconds)
- Manual tuning backwards (Radio mode)
- Menu cursor left (MP3 mode)
20 - Radio tune
- Track skip/seek
- Next track (DVD, CD mode)
- Fast forward (DVD, CD mode，press more than 2 seconds)
- Manual tuning forwards (Radio mode)
- Menu cursor right (MP3 mode)
21 FM Stereo/Mono
- Menu cursor up (MP3 mode)
22 - AMS: Radio auto preset/Radio preset scan
- Menu cursor down (MP3 mode)
23 Confirm operation (in settings mode)
Remote Control
Power on/off: Press
to turn on/off the unit.
1 Zoom (DVD/VCD only)
2 Title (DVD only)
3 Power on/off
4 Setup
5 Menu cursor
6 Enter
7 Program
8 Digit area
9 - Audio mode select Bas/Tre/Bal/Fad/Bri/Con/Sat
- Press more than 2 seconds to menu mode
10 Volume
11 Mute
12 - Radio tune
- Track skip/seek
13 Subtitle (DVD only)
14
15
16
17
18
19
20
21
22
23
24
25
- Radio
- Disc (when disc inserted)
- USB (when USB inserted)
- Card (when SD/MMC inserted)
- AV IN
Repeat
Repeat A→B
Stop/Return
Play/Pause
Goto search
- DVD menu
- PBC (for VCD 2.0 or up)
On screen display
- DVD audio
- VCD audio L/R/ST
On faceplate display
Angle (DVD only)
- Video system PAL/NTSC/AUTO
- Radio band
Remote Control
Replacing the lithium battery of remote control
unit.
Remote control operating range
The remote control can operate within a distance of 3~5m.
When the range of the operation of the card remote control
becomes short or no longer functions while operating, replace the
battery with a new lithium battery. Make sure the battery polarity
replacement is correct.
1.Pull out the battery holder while pressing the stopper.
2.Insert the button-type battery with the stamped (+) mark facing
upward. Insert the battery holder into the remote control.
(CR 2025)
1
2
Warning
•Store the battery where children cannot reach. If a child
accidentally swallows the battery, consult a doctor immediately.
•Do not recharge, short, disassemble or heat the battery or
dispose it in a fire.
•Do not expose or bring into contact the battery with other metallic
materials.
•When throwing away or saving the battery, wrap it in tape and
insulate; otherwise, the battery may give off heat, crack or even
cause a fire.
Getting Started
Press the
button to open the faceplate and press
Light up when you slide the
faceplate down; flash when
you remove the faceplate.
to eject the disc.
Note: Pressing the RESET button
by inserting a pointed tool such as
the end of an unbent paper clip.
USB/SD/MMC/MP3 Playback
USB/SD/MMC Notes
1. Load SD/MMC card
Open the faceplate and insert the SD/MMC card into the slot. Close
the faceplate, the unit will read the file of the card automatically.
USB functions (flash memory type) MP3 music play
1.SD/MMC card support
2.USB flash memory 2 in 1 (SD/MMC ) support
3. Support FAT 16 & FAT 32
4. File name: 32 byte/dir name: 32 byte/tag name: 32 byte
5. Tag (id3 tag ver 2.0)
- Title/artist/album: 32 byte support
6. Multi card reader not support
7. USB 1.1 support
Not all kinds of USB devices are compatible with the unit.
2. Take out SD/MMC card
Press SRC button to non-SD mode, press the SD/MMC card to pop
out. Take out the card.
3. Load USB device
Insert USB device into the USB jack. The unit will read the file in
the USB device automatically.
4. Take out USB device
Press the SRC button to non-USB mode and take out the USB
device from the USB jack.
General Operation
Switching on and off
1. Press to turn on the unit.
2. Press SRC once or more to select your desired function: DISC, Tuner (Radio), USB & SD/MMC, AV IN.
3. Press to power off.
4. When you switch off the system or car ignition, the settings, tuner presets and the volume level will be retained in the unit's memory.
VOL Knob Function
Press the knob once to select BASS/TREBLE/BALANCE/FADER/BRIGHTNESS/CONTRAST/SATURATION, and rotate the knob to adjust.
SETTING
BASS
TREBLE
BALANCE
FADER
BRIGHTNESS
CONTRAST
SATURATION
SETTING
BASS
TREBLE
BALANCE
FADER
BRIGHTNESS
CONTRAST
SATURATION
SETTING
SETTING
BASS
TREBLE
BALANCE
FADER
BRIGHTNESS
CONTRAST
SATURATION
SETTING
BASS
TREBLE
BALANCE
FADER
BRIGHTNESS
CONTRAST
SATURATION
BASS
TREBLE
BALANCE
FADER
BRIGHTNESS
CONTRAST
SATURATION
SETTING
SETTING
BASS
TREBLE
BALANCE
FADER
BRIGHTNESS
CONTRAST
SATURATION
BASS
TREBLE
BALANCE
FADER
BRIGHTNESS
CONTRAST
SATURATION
Rotary Knob Menu
EQ mode
Press the knob more than 2 seconds to enter menu mode, then
each press changes the mode as follows:
EQ MODE
BEEP
12 /24 MODE
VOL MODE
A-VOL
PARKING
SUBWOOFER
SUBW-VOL
Rotate the knob to select EQ sound effect:
ROCK - POP - CLASSIC - FLAT - EQ OFF
EQ MODE
BEEP
12/24 MODE
VOL MODE
A-VOL
PARKING
SUBWOOFER
SUBW-VOL
EQ MODE
BEEP
12/24 MODE
VOL MODE
A-VOL
PARKING
SUBWOOFER
SUBW-VOL
BEEP ON/OFF mode
Rotate the knob to choose button beep sound on or off.
EQ MODE
BEEP
12/24 MODE
VOL MODE
A-VOL
PARKING
SUBWOOFER
SUBW-VOL
Rotary Knob Menu
12/24 mode
A - VOL
Select 12 hours mode or 24 hours mode.
Rotate the knob to choose A-VOL level.
EQ MODE
BEEP
12/24 MODE
VOL MODE
A-VOL
PARKING
SUBWOOFER
SUBW-VOL
EQ MODE
BEEP
12/24 MODE
VOL MODE
A-VOL
PARKING
SUBWOOFER
SUBW-VOL
VOL - MODE
PARKING mode
Rotate knob to choose VOL LAST, the turn-on volume level is the
volume of latest power off.
Rotate knob to choose VOL ADJ, then rotate the knob to set the
turn-on volume level.
Rotate the knob to turn rear parking attention on or off. While the
unit enters PARKING ON mode, and plays the video disc, the
screen will appear “ DO NOT WATCH VIDEO WHILE DRIVING”,
and blank screen.
EQ MODE
BEEP
12/24 MODE
VOL MODE
A-VOL
PARKING
SUBWOOFER
SUBW-VOL
EQ MODE
BEEP
12/24 MODE
VOL MODE
A-VOL
PARKING
SUBWOOFER
SUBW-VOL
10
Rotary Knob Menu
Subwoofer Cross Over
Rotate the knob to choose SUBWOOFER frequency: 80Hz, 120Hz,
160Hz.
EQ MODE
BEEP
12/24 MODE
VOL MODE
A-VOL
PARKING
SUBWOOFER
SUBW-VOL
OFF
80
Hz
120 Hz
160 Hz
Subwoofer Volume
Rotate the knob to choose SUBW - VOL.
EQ MODE
BEEP
12/24 MODE
VOL MODE
A-VOL
PARKING
SUBWOOFER
SUBW-VOL
11
Radio
Band
Tune
1. Press
to power on, then press SRC once or more to select
tuner.
FM2
FM3
2. P ress BAND once or more to select FM1
AM1 (MW1)
AM2 (MW2). Display shows wave band,
frequency, and preset station number if already stored.
Radio tune by step manually:
Press
or
less than 2
seconds.
Radio seek automatically:
Press
or
more than 2
seconds.
Press either
button to
store the selected station.
AM 01:40
FM1: 87.50 MHz P1
FLAT
12
DVD & AV IN Mode
Radio and Clock
DVD Mode
AMS: Auto Memory Store
Press SRC button to select DVD mode (when disc is inserted, and unit is reading
disc), then press the DISP button. The LCD will display:
Press AMS briefly to scan the preset station 1 - 6
for 5 seconds each. Hold more than 2 seconds, the
6 strongest available stations will be automatically
saved in the memory of preset button 1 - 6.
AF
AMS
Clock Setting
1. Press DISP more than 2 seconds,
minute display blinks, rotate the
knob to set minute.
2. Press the knob once, hour display
blinks, rotate the knob to set hour.
3. Press DISP to confirm.
AV IN Mode
Press SRC button to select AV IN mode (when unit is reading).
The LCD will display:
13
Disc Playback
Disc Playable
Disc Load / Eject
File type supported
Load: P
ress
button to flip down the faceplate. Insert the disc
into the slot.
button to flip down the faceplate. Press
to
Eject: P
ress
eject the disc.
Audio file: MP3(*.mp3), WMA(*.wma)
Video file: MP4(*.avi, DIVX3.11 / 4.0 / 5.0 / 6.0 / 7.0)
MPEG 2(*.vob)
MPEG 1(*.dat)
Picture file: JPEG(*.jpg)
MP3 file: ISO 9660 or ISO 9660 + Joliet format - Max. 30
characters.
Max. nested directory is 8 levels.
The max. album number is 99.
The max. length of each track is 99 minutes 59 seconds.
S
upported sampling frequency for MP3 disc: 8KHz to
48KHz (44.1KHz preferably).
S
upported bit-rates of MP3 disc are: 32 - 320 kbps (128
kbps preferably).
Disc Playback
1. When disc inserted, display shows LOAD. For MP3 or disc with
mixed files, reading time may exceed 1 minute.
2. ERROR will be displayed if error found in disc operation.
3. For VCD/CD, VCD or CD icon will appear on the display.
4. While MP3/WMA files playback, MP3/WMA icon will appear on
the display.
5. F or DVD, DVD icon will appear on the display and TITLE
appears. Press ENTER or to play.
Disc and file NOT supported
*.AAC, *.DLF, *.M3U, *.PLS, MP3 PRO files and files with DRM.
Open session discs.
14
Audio/Video/Picture File Playback
When AUDIO/PICTURE/VIDEO file is played, Category/Folder/File
list will be displayed on the screen, and file/folder name being
played will be displayed on top. Current selected item will be
highlighted.
[ \ ]:MP3 SOND: FOLDER
USB
Category Select
Use
/
to select
AUDIO
PICTURE
VIDEO
Press ENTER to confirm.
Folder Select
Use / to enter folder list and use
press ENTER to confirm.
/
to select desired folder,
MON
File Select
OK
Use / to enter file list and use / to select desired file, press
ENTER to play back, press to return.
For PICTURE, press
to slide show the pictures, press PROG to
select picture showing style.
For MUSIC, press will enter intro logo, then press
to return.
AMS
On the remote control
15
On the faceplate
Track Playback
Select desired track
Repeat
- Press or to skip to the next track.
-U
se 1-9 and 0, 10+ buttons on the remote control to select
desired track number.
During playback, press RPT once or more.
- RPT icon will appear on the display.
RPT ALL
RPT OFF
- For VCD/CD: Display appears RPT ONE
- For DVD: Display appears RPT CHAPTER
RPT TITLE
RPT
OFF
RPT DIR
RPT ALL
- For File disc: Display appears RPT ONE
RPT OFF
Note: If you do not select RPT on, when the entire
disc or TITLE playback has finished, the system will
stop. If no other control, after 5 minutes the unit will
turn into standby mode.
Fast forward/backward during playback
Press
or
for more than 2 seconds once or more to select X2,
X4, X8, X20 to fast backward or forward track during playback.
-D
uring the fast forward or backward operation, press
briefly to
playback again.
-D
uring the fast forward or backward operation, the volume will be
muted.
Repeat A
Intro (for CD/VCD only)
B
Select desired passage to repeat playback.
- Press A
B once to select starting point. Display shows REPEAT A.
- Press A
B again to select ending point.
Display shows REPEAT A
B, and selected
passage start to replay.
- Press A
B once again to exit. Display shows
A
B CANCELLED.
You can play the beginning of every track for 15 seconds in
sequence.
1. During playback, press INT once.
- INT ON/OFF will appear on the display.
2. Press INT again to select the current track.
Random track playback (for CD/VCD/MP3 Only)
You can play all the tracks in random order.
1. During playback, press RDM once or more.
- RDM icon will appear on the display.
2. Press RDM again to select normal playback.
16
Track Playback
Pause
Program
- During playback, press
to pause playback.
- The sound will be muted.
-Display "PAUSE" in the TV screen, display
and blink "PAUSE" on the faceplate display.
Press
again to continue playback.
-Press PROG to enter program list. Use / or / cursor and
digit button to enter number.
For DVD and File disc, select title and chapter number.
For VCD and CD, select track number.
-Press
to play, or move the cursor to select "PLAY" and press
ENTER to play.
-If you want to delete the list, move the cursor to "CLEAR", press
ENTER to delete all the list set before.
- Press PROG again to exit program play.
PBC - Playback Control (for VCD only )
1.If you insert a VCD with PBC, playback starts from the beginning
of the 1st track automatically.
2.Press PBC to show menu, use
/
or digit button to select
desired track. Press to return to menu. Press PBC again to exit
menu.
GOTO
Goto desired track/chapter or time point directly.
Press GOTO button on the remote control, track or DVD Title/
Chapter and time display on top of the screen. Current item is
highlighted. Use / to select desired item. Use digit button to
select number. Press ENTER to confirm.
DVD and Files disc
MP3, VCD and CD
17
DVD Playback
DVD Audio Select
DVD Angle Select
Press AUDIO or R/L to select audio language to listen if the DVD
has multiple audio languages.
Press ANGLE to select different angle to view if the DVD has
multiple-angle views.
ZOOM
VCD Audio Select
Press R/L to select audio channel to listen.
Press ZOOM button, the picture will be zoomed accordingly.
L
R
Stereo
X2
DVD Subtitle Select
Press SUB.T to select the subtitle language to show if the DVD has
multiple language subtitles.
DVD TITLE Select
Press TITLE to display title or chapter list, use
or digit number to select, press ENTER to play.
/
or
/
cursor
18
X3
X4
X1/2
X1/3
X1/4
OFF
DVD Setup
DVD System Setup
Press SETUP to display setup menu on the screen.
Use / to select setup items:
TV System
SYSTEM
Use
/
,
LANGUAGE
/
AUDIO
Select the TV system in the setting menu.
VIDEO
to select and ENTER to confirm.
SYSTEM LANGUAGE
AUDIO
VIDEO
Screen Saver
The screen saver appears if disc stop last more than 3 minutes.
Original setting: ON.
19
DVD System Setup
Setting TV type
Select TV type to watch widescreen movies.
4:3 Pan Scan: For 4:3 TV, left and right edges will be cut.
4:3 Letter Box: For 4:3 TV, black bars will appear on top and
bottom.
16:9: For 16:9 wide screen TV.
Load Default
If this item is selected, the unit will return to original setting.
20
DVD Language Setup
OSD Language
Subtitle Language
Select on screen display language of the DVD.
Select subtitle language of the DVD from which are contained in
the DVD.
SPANISH
FRENCH
SPANISH
RUSSIAN
FRENCH
RUSSIAN
Audio Language
Menu Language
Select audio language of the DVD from which are contained in the
DVD.
Select menu language of the DVD from which are contained in the
DVD.
SPANISH
FRENCH
SPANISH
RUSSIAN
FRENCH
RUSSIAN
21
DVD Audio Setup
Setting Volume
Setup the volume with the
/
buttons.
22
DVD Video Setup
Brightness
Set the brightness of the video output with
Set the contrast of the video output with
Set the hue of the video output with
Saturation
.
Set the saturation of the video output with
Sharpness
Contrast
Hue
/
/
/
Set the sharpness of the video output with
.
.
23
/
.
/
.
Electrical Connections
Wiring Diagram (Professional Installation Recommended. Always Use a Voltage Meter for Testing. )
Video-out 1
Video-out 2
Video-in
Antenna
Camera-in
USB slot
(Blue)
(Pink)
(Green/
White)
Parking SW
(Active low level input)
(Yellow)
(Yellow)
(Yellow)
(Black)
Fuse 15A
Subwoofer out
Reverse
(Active high level input)
(Yellow)
Front Line-out(Brown)
R(Red)
L(White)
Rear Line-out(Gray)
R(Red)
L(White)
24
Amplifier
Installation Guide
Installation Procedures
First complete the electrical connections, and then check for
correctness.
IMPORTANT:
Remove these two screws before installation. Otherwise,
the DVD player will not work.
Reset
Press
button to flip down the faceplate. Then press the RESET
button with a pointed object to reset the unit to the original status.
Note: Press the RESET button will erase the clock and stored
stations.
Mounting bolt
rubber cushion.
1
2
3
Installation Opening
This unit can be installed in any dashboard having an opening as
shown below.
The dashboard should be 4.75mm - 5.56mm thick in order to be
able to support the unit.
1.Inset mounting collar into the dashboard, and
bend the mounting tabs out with a screwdriver.
52mm
Make sure that lock lever
is flush with the Lock lever
mounting collar (not projecting outward).
2.Secure the rear of the unit.
After fixing mounting bolt and power connector,
fix the rear of the unit to the car body by rubber
cushion.
183mm
3.Insert trim plate.
25
Anti-Theft System
This unit is equipped with a flip-down detachable faceplate.
Faceplate can be detached and taken with you, helping to deter theft.
Remove the faceplate
1.Press button to switch off the power of the unit.
button to flip down the faceplate.
2.Press
3.Hold the right of the faceplate. Take off right end, and then take off the left end.
4.Place the faceplate into the case and take it with you when you leave the car.
Install the faceplate
1.Hold the faceplate and ensure the faceplate faces downwards, and set the left
side of the faceplate in the faceplate bracket.
2.Press the right side of the faceplate until it locks.
Remove the unit
1.Remove the faceplate and the trim plate.
2.Insert both T-Keys into hole on the front of the set until they lock.
3.Pull out the unit.
26
Troubleshooting
If you suspect something is wrong, immediately switch power off. Do not use the unit in abnormal condition, for example without sound, or with
smoke or foul smell, can cause fire or electric shock. Immediately stop using it and call the store where you purchased it. Never try to repair the unit
yourself because it is dangerous to do so.
General
Radio
No power or no sound.
Noise in broadcasts.
Car's engine switch is not on. Turn your car's key to ACC or ON.
Cable is not correctly connected. Check connection.
Fuse is blown. Replace fuse.
Check volume or mute on / off.
If the above solutions cannot help. Press the RESET button.
Check that telephone mute input cable is not been trapped
and grounded during installation.
Station is too far, or signals are too weak.
Select other stations of higher signal level.
Preset station lost.
Battery cable is not correctly connected.
Connect the battery cable to the terminal that is always live.
Error Display Messages
Disc
Disc is inside but no sound.
Display shows ERROR.
Disc is dirty, damaged or upside down.
Press to eject the disc.
Disc is upside down.
Place disc in the correct direction, and the label side up.
Disc is dirty or damaged. Clean disc or change another disc.
When video file initializing time is too long.
File read error or file type not supported.
Press SRC to exit. Then press SRC to play disc again.
Disc sound skips, tone quality is low.
Disc is dirty or damaged. Clean CD or change another CD.
Sound skips due to vibration.
Mounting angle is over 30o.
Adjust mounting angle to less than 30o.
Unstable mounting.
Mount the unit securely with the mounting parts.
27
Specifications
General
Power supply
Maximum power output
Continuous power output
Suitable speaker impedance
Pre-Amp output voltage
Fuse
Dimensions(WxHxD)
Weight
Sub-out Aux-in level
AM(MW) Radio
12VDC (11V-16V)
Test voltage 14.4V, negative ground
45Wx4 channels
25Wx4 channels (4 10% T.H.D.)
4-8 ohm
4.0V(CD play mode: 1KHz, 0dB,
10K load)
15A
178x50x166mm
2.2kg
4.0V
300mV
Frequency range
522-1620KHz (Europe)
530-1710KHz (America)
Usable sensitivity(S/N=20dB) 30dBμ
Disc Player
System
Frequency response
Signal/noise ratio
Total harmonic distortion
Channel separation
Video signal format system
Video output
Horizontal nesowtiou
3.5 Inch TFT LCD
Display resolution(dot)
Active area(mm)
Screen size(inch)
Dot pitch(mm)
Contrast ratio
Brightness
Components
320×(RGB)×234
76.32 (H)×42.822 (V)
3.5 (16:9l)
0.2385 (H)×0.183 (V)
350
350nits
Mounting collar
Machine screws M5x6 mm
M4x6 mm Mounting bolt (50 mm) Wire connector
Removable face plate case
Trim plate
T-key Operating Instructions
Rubber cushion Remote control
FM Stereo Radio
Frequency range
Usable sensitivity
Frequency response
Stereo separation
Image response ratio
IF response ratio
Signal/noise ratio
Disc digital audio system
20Hz - 20KHz
>80dB
Less than 0.20% (1KHz)
>60dB
PAL/NTSC/AUTO
1 0.2V
500 lines
87.5-108.0MHz (Europe)
87.5-107.9MHz (America)
8dBμ
30Hz-15KHz
30dB (1KHz)
50dB
70dB
>55dB
1
4
4
1
1
1
1
2
1
1
1
Note: Specifications and the design are subject to change without notice due to improvements in technology.
28
Limited Warranty
Bravo View Technology warrants this product (including any accessory and/or cable) against defects in material or workmanship as follows:
1. Labor. For a period of 1 Year from original date of purchase, if the product is determined to be defective, Bravo View will repair or replace the
product at no charge.
2. Parts. For a period of 1 Year from original date of purchase, Bravo View will at no charge, replace with new or rebuilt parts in exchange for defective
parts. The warranty will either continue from date of original purchase or 90 days from repair (Whichever is longer).
This warranty does not cover customer misuse, improper installation, poor signal (including any “noise”), cosmetic damage, damage due by accident,
abuse, negligence, commercial use, and improper operation.
Proof of Purchase in the form of a copy of a bill of sale or copy of receipted/invoice, which shows clearly the sale of the unit, is required.
Repair or Replacement as provided under this warranty is the exclusive remedy of the consumer. Bravo View Technology shall not be liable for
any incidental or consequential damage for breach of any express or implied warranty on this product. In no event shall Bravo View Technology
be liable for any incidental or consequential damage whatsoever arising out of the use or inability to use the product. Under no circumstance shall
Bravo View Technology’s liability exceed the purchase price paid for the product. Except to the extent prohibited by applicable law, any implied
warranty or merchantability or fitness for a particular purpose on this product is limited in duration to the duration of this warranty.
PROCESS:
1. Contact Bravo View and describe the problem with the unit. Please have your model number, date of purchase and where it was purchased ready.
If requesting on-line, please include your name, address and telephone number.
2. If determined that the item is warrantable, Bravo View will issue a RA# and provide an address to mail the unit back to.
3. Bravo View is not responsible for articles lost or stolen during shipping. IT IS ADVISABLE TO SHIP THE UNIT IN A METHOD IN WHICH YOU CAN
TRACK THE PACKAGE, AND POSSIBLY INSURE THE PACKAGE. Bravo View does not cover the expense of mailing the unit back to us.
4. Once Bravo View receives and validates the unit to ensure it is within warranty, Bravo View will replace the unit, fix the unit, or offer a substitute of
the unit if a replacement is not available. Bravo View may send a refurbished unit back.
5. Bravo View will mail the unit back to you.
To obtain warranty service, you must contact Bravo View Technologies for a Return Authorization Number (RA#).
866-40-BRAVO or visit www.bravoview.com.
CLASS 1
LASER PRODUCT
P.N.: 127075001748