758 KB - M

758 KB - M
PC CONFIGURATOR CABLE
MODEL: COP-UM / COP-US
DRIVER INSTALLATION MANUAL
EM-9201-C Rev.2
1
CONTENTS
1.INTRODUCTION....................................................................................3
1.1OUTLINE.............................................................................................................................3
1.2
PC REQUIREMENTS..........................................................................................................3
2.SETUP....................................................................................................4
2.1INSTALLATION....................................................................................................................4
2.2UNINSTALLATION...............................................................................................................5
2.3 HOW TO MAKE YOUR PC RECOGNIZE COP-UM/US VIA USB PORT.............................5
2.3.1 FOR Windows 7 / Windows Vista...............................................................................5
2.3.2 FOR Windows XP.......................................................................................................5
2.4 HOW TO CHANGE COM PORT NUMBER...........................................................................7
2.4.1 FOR Windows 7 / Windows Vista...............................................................................7
2.4.2 FOR Windows XP.......................................................................................................8
EM-9201-C Rev.2
2
1.INTRODUCTION
1.1OUTLINE
This user’s manual provides the necessary information and describes the procedures for connecting successfully
some M-System’s products to a PC by using USB device. COP-UM is a device with modular jack connector. COPUS is a device with miniature jack connector.
Please refer to the following steps for a proper use of COP-UM/US (hereafter called as “device”).
1.2
• Installation of the device driver in your PC
• Device connection to the USB port of your PC
PC REQUIREMENTS
The information and procedures provided in this guide are only operative with the following systems.
PC
Compatible with IBM PC
OS
Windows XP Service Pack 3
Windows Vista (32 bit) Service Pack 1
Windows 7 (32 bit / 64 bit) Service Pack 1
Note: The software may not function in certain conditions.
EM-9201-C Rev.2
3
2.SETUP
2.1INSTALLATION
For using this device it is necessary to install the driver software in your PC. You can find it in the attached CD or at
www.m-system.co.jp
When the driver software is compressed, decompress it and execute “setup.exe.” Then follow the instruction in order
to complete the installation.
Note: Make sure device is not connected to USB port of your PC during the installation.
Windows Administrator account rights are required in order to install the driver software. When the following dialog
appears, click on [Allow] to continue with the installation.
■ For Windows 7
Click on [Yes]
■ For Windows Vista
Click on [Continue]
During the installation, dialogs as the following will be displayed. This is the Microsoft software verification dialog. M-System has verified the software, so click on “Install this driver software anyway.”
■ For Windows Vista or Windows 7
Click on [Install this driver software anyway].
EM-9201-C Rev.2
4
■ For Windows XP
Click on [Continue Anyway].
2.2UNINSTALLATION
If you finished using COP-UM/US and you want to delete the driver from your computer, uninstall it. For uninstalling, do it from the “Add/Remove Programs” on your Windows “Control Panel.” (For Windows XP, from the “Add or
Remove Programs”). Select COP-UM (or US) DriverX.X. (X.X is the version number) and click “Remove.”
2.3 HOW TO MAKE YOUR PC RECOGNIZE COP-UM/US VIA USB PORT
Windows recognizes the device connecting it to the USB port of your computer after installing the driver software and
installs it automatically.
Note: We recommend connecting always the device in the same USB port. Once the PC has recognized the device
allocation on a selected port, an error might occur if it is connected it to a different USB port.
2.3.1 FOR Windows 7 / Windows Vista
For Windows 7 or Windows Vista, connecting the device to the USB port, balloon tips as follows are displayed in the
bottom right of the screen, then it becomes able to be used automatically.
2.3.2 FOR Windows XP
Windows XP displays the “Found New Hardware Wizard” automatically. Follow the steps below to make the device
operative.
1. Click on [No, not this time].
2. Click on [Next].
EM-9201-C Rev.2
5
3. Click on [Install the software automatically (Recommended)].
4. Click on [Next].
5. Click on [Continue Anyway].
6. Click on [Finish].
After step 6 is completed, repeat the procedure from step 1 once again.
EM-9201-C Rev.2
6
2.4 HOW TO CHANGE COM PORT NUMBER
The device is allocated automatically in the COM port that is available. Referring to this, configuration is changeable.
2.4.1 FOR Windows 7 / Windows Vista
1. Click on [Start].
2. Right-click on [Computer].
3. Click on [Manage].
4. Click on [Continue].
This screen is not displayed depending on the OS setting. In that case, skip this step.
5. Click on [Device Manager].
6. Click on [Ports (COM & LPT)].
7. Double click on [M-System COP-US (COMx)].
EM-9201-C Rev.2
7
8. Click on [Port Settings].
9. Click on [Advanced].
10. In [COM Port number] you can change the COM port allocation number.
11. Clicking on [OK] the changes will be operative.
2.4.2 FOR Windows XP
1. Click on [Start].
2. Right-click on [My Computer].
3. Click on [Manage].
EM-9201-C Rev.2
8
4. Click on [Device Manager].
5. Click on [Ports (COM & LPT)].
6. Double click on [M-System COP-US (COMx)].
7. Click on [Port Settings].
8. Click on [Advanced].
9. In [COM Port number] you can change the COM port allocation number.
10. Clicking on [OK] the changes will be operative
EM-9201-C Rev.2
9
M-SYSTEM WARRANTY
1. What is covered.
M-System Co., Ltd. (“M-System”) warrants, only to the original
purchaser of new M-System products purchased directly from
M-System, or from M-System’s authorized distributors or resellers, for its own use not for resale, that the M-System products
shall be free from defects in materials and workmanship and
shall conform to the specifications set forth in the product catalogue applicable to the M-System products for the Warranty
Period (see Paragraph 5 below for the Warranty Period of each
product).
THE ABOVE WARRANTY IS THE ONLY WARRANTY APPLICABLE TO THE M-SYSTEM PRODUCTS AND IS IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A
PARTICULAR PURPOSE.
2. What is not covered.
This warranty does not cover any M-System product which
has been: (1) modified, altered or subjected to abuse, misuse,
negligence or accident; (2) improperly installed or installed in
conjunction with any equipment for which it was not designed;
or (3) damaged or destroyed by disasters such as fire, flood,
lightning or earthquake.
In no event shall M-System be liable for any special, incidental,
consequential or other damages, costs or expenses (including,
but not limited to, loss of time, loss of profits, inconvenience or
loss of use of any equipment).
3. Remedies.
If a defective product is returned to M-System in accordance
with the procedures described below, M-System will, at its sole
option and expense, either: (1) repair the defective product;
(2) replace the defective product; or (3) refund the purchase
price for the defective product paid by the purchaser. Except
as otherwise provided by applicable state law, these remedies
constitute the purchaser’s sole and exclusive remedies and
M-System’s sole and exclusive obligation under this warranty.
4. Warranty Procedure.
If the purchaser discovers a failure of the M-System products
to conform to the terms of this warranty within the Warranty
Period, the purchaser must promptly (and, in any event not
more than 30 days after the discovery of such failure) notify
the relevant party as described below either by telephone or in
writing at the below address to obtain an Authorized Return (AR)
number and return the defective product to the relevant party.
The designated AR number should be marked on the outside
of the return package and on all correspondence related to the
defective product. The purchaser shall return, at purchaser’
s expense, defective products only upon receiving an AR
number. In order to avoid processing delays, the purchaser
must include: copies of the original purchase order and sales
invoice; the purchaser’s name, address and phone number;
the model and serial numbers of the returned product; and a
detailed description of the alleged defect.
5. Warranty Period.
Signal Conditioner: 36 months from the date of purchase.
M-Rester:
12 months from the date of purchase.
Valve Actuator: 18 months from the date of shipment
from M-System or 12 months from
the date of its installation, whichever
comes first.
Other Products: 36 months from the date of purchase.
M-SYSTEM CO., LTD.
5-2-55, Minamitsumori, Nishinari-ku,
Osaka 557-0063 JAPAN
Phone: (06) 6659-8201
Fax: (06) 6659-8510
E-mail: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement