CYP CPLUS-V3H1H Operation Manual

CPLUS-V3H1H

3x1 HDMI Switch with Auto Source Switching

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.

Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means— electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from

Cypress Technology.

© Copyright 2018 by Cypress Technology.

All Rights Reserved.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document are trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in use to avoid wasting electricity.

VERSION HISTORY

REV.

DATE

RDV1 2019/06/06

SUMMARY OF CHANGE

Preliminary release

CONTENTS

1. Introduction ......................................................1

2. Applications .....................................................1

3. Package Contents ..........................................1

4. System Requirements ......................................1

5. Features ............................................................2

6. Operation Controls and Functions .................3

6.1 Top Panel ................................................... 3

6.2 Rear Panel .................................................. 4

6.3 RS-232 Pinout and Defaults ...................... 5

6.4 Serial Commands ...................................... 5

7. Connection Diagram ......................................8

8. Specifications ..................................................9

8.1 Technical Specifications .......................... 9

8.2 Video Specifications ............................... 10

8.3 Audio Specifications ............................... 12

8.3.1 Digital Audio ................................... 12

8.4 Cable Specifications .............................. 12

9. Acronyms .......................................................13

1. INTRODUCTION

This 3x1 4K UHD HDMI switch features three HDMI inputs and one HDMI output with manual or automatic source switching. Every input and output supports full bandwidth 4K@60Hz (4:4:4, 8-bit) HDMI 2.0 with

HDCP 2.2 signals. Automatic source management allows for handsfree switching based on input signal and hot plug detection with a

“Last Memory” switching feature upon signal loss. This switch is an ideal addition to any conference room, lecture hall or home entertainment setup with its portable and easy to install design. Control is via a top panel button and RS-232.

2. APPLICATIONS

• Conference rooms and boardrooms

• Lecture halls, auditoriums and classrooms

• Household entertainment sharing and control

3. PACKAGE CONTENTS

• 1× 3×1 HDMI Switcher

• 1× Micro USB cable

• 1× Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as media players, video game consoles or set-top boxes.

• HDMI receiving equipment such as an HDTV, monitor or audio amplifier.

• The use of Premium High Speed HDMI cables is highly recommended.

1

5. FEATURES

• HDMI 2.0 and DVI 1.0 compatible

• HDCP 1.x and HDCP 2.2 compliant

• 3 HDMI inputs, 1 HDMI output

• Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input and output

• Supports Deep Color input and output up to 12-bit

• Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output

• Supports pass-through of many audio formats including 8 channel

LPCM, Bitstream, and HD Bitstream

• Supports manual input selection or automatic input selection with hot plug detection and “Last Memory” feature

• Sophisticated EDID management ensures optimal compatibility

• LED indicators provide input selection as well as automatic switch status information

• Small and portable switch box design

• Can be powered via the Micro USB port (1A minimum) or an optional external power supply

• Control via top panel button, RS-232, and IR (requires optional IR remote)

2

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Top Panel

IN

SEL.

AUTO HDMI 1 HDMI 2 HDMI 3

1 2 3

1 AUTO LED: This LED will illuminate when the auto switch function is active. While active, the input source will be selected based on the most recently connected live source.

2 HDMI 1~3 LEDs: The LED of the currently selected input will illuminate green. When an input has an active source, but is not currently selected, it will illuminate red. When no source is detected the LED will remain off.

3 IN SEL. Button: Press this button to sequentially switch through the available inputs or select auto switch.

Note: The sequence is: HDMI 1 > HDMI 2 > HDMI 3 > Auto > HDMI 1

3

6.2 Rear Panel

DC 5V

HDMI OUT HDMI 3 HDMI 2 HDMI 1 RS-232 PWR

1 2 3 4 5

1 HDMI OUT Port: Connect to an HDMI TV, monitor, or amplifier for digital video and audio output.

2 HDMI 1~3 Ports: Connect to HDMI source equipment such as media players, game consoles or set-top boxes.

3 RS-232 Port: Connect directly to your PC/laptop to send RS-232 commands to control the unit.

Note: Requires the use of a 3.5mm to DE-9 adapter.

4 Micro USB PWR Port: Connect the provided micro USB cable to this port and connect the other end to a USB power source for power.

Note: USB power source must provide a minimum of 1 Amp.

5 DC 5V PWR Port: Plug a 5V DC power adapter into this port and connect it to an AC wall outlet for power. (Optional accessory)

4

6.3 RS-232 Pinout and Defaults

Serial Port Default Settings

Baud Rate 19200

Data Bits

Parity Bits

8

None

Stop Bits

Flow Control

1

None

1

2

3

TxD

RxD

GND

3.5mm to DE-9

Adapter Cable

6.4 Serial Commands

COMMAND

Description and Parameters

?



Show the full command list.

help 

Show the full command list.

set factory default 

Reset the unit to the factory defaults.

get command ver 

Show the unit's current command version.

get fw ver 

Show the unit's current firmware version.

get model name 

Show the unit's model name.

5

COMMAND

Description and Parameters get model type 

Show the unit's product type.

set out A route N1 

Route the specified input to the HDMI output.

N1 = 1~3 [HDMI input number] get out A route 

Show which input is currently routed to the HDMI output.

set out auto mode N1 

Set the auto switching/scanning behavior of the unit.

Available values for N1 :

0

1 get out auto mode 

[Off]

[Auto switch]

Show the current auto switching/scanning mode of the unit.

get in type list 

List the port type of all inputs on the unit.

get out type list 

List the port type of all outputs on the unit.

get in port number 

Show the total number of inputs on the unit.

get out port number 

Show the total number of outputs on the unit.

set in N1 edid N2 

Set the EDID to use on the specified input.

N1 = 1~3

Available values for N2 :

[HDMI input number]

1 [Internal FHD, 2 channel audio]

6

COMMAND

Description and Parameters

2

3

[Internal FHD, multi-channel audio]

[Internal UHD, 2 channel audio]

6

7

4

5

[Internal UHD, multi-channel audio]

[Internal UHD+, 2 channel audio]

[Internal UHD+, multi-channel audio]

[User EDID 1]

8

9

10 get in N1 edid 

[User EDID 2]

[User EDID 3]

[Copy output’s EDID]

Show the EDID currently being used on the specified input.

N1 = 1~3 [HDMI input number] get in edid list 

List all available EDID selections.

set user N1 edid data N2 

Upload a new EDID (in ASCII hex format) for use as the specified

User EDID.

N1 = 1~3

N2 = {Comma delimited hex pairs}

[User EDID number]

[EDID data] get user N1 edid data 

Show the current contents of the specified User EDID as HEX data.

N1 = 1~3 [User EDID number]

Note: Commands will not be executed unless followed by a carriage return. Commands are not case-sensitive.

7

7. CONNECTION DIAGRAM

Game Console Blu-ray Player PC/Laptop

HDMI

Input

HDMI OUT HDMI 3 HDMI 2 HDMI 1 RS-232 PWR

DC 5V

HDMI

Output

4K TV or

Monitor or

Projector

8

8. SPECIFICATIONS

8.1 Technical Specifications

HDMI Bandwidth

Input Ports

Output Ports

Control Ports

18Gbps

3×HDMI (Type-A)

1×HDMI (Type-A)

1×RS-232 (3.5mm)

Service/Power Port

IR Frequency

1×USB 2.0 (Micro B)

38kHz

Baud Rate 19200

Power Supply (Optional) 5V/1A DC

ESD Protection (HBM)

(US/EU standards, CE/FCC/UL certified)

±8kV (Air Discharge)

±4kV (Contact Discharge)

157mm×30mm×102mm [Case Only] Dimensions (W×H×D)

Weight

Chassis Material

Chassis Color

157mm×30mm×102mm [All Inclusive]

190g

Plastic (ABS)

Black

Operating Temperature 0˚C – 40˚C/32˚F – 104˚F

Storage Temperature

Relative Humidity

Power Consumption

-20˚C – 60˚C/-4˚F – 140˚F

20 – 90% RH (Non-condensing)

3.2W

9

8.2 Video Specifications

Supported Resolutions (Hz)

720×400p@70/85

640×480p@60/72/75/85

720×480i@60

720×480p@60

720×576i@50

720×576p@50

800×600p@56/60/72/75/85

848×480p@60

1024×768p@60/70/75/85

1152×864p@75

1280×720p@50/60

1280×768p@60/75/85

1280×800p@60/75/85

1280×960p@60/85

1280×1024p@60/75/85

1360×768p@60

1366×768p@60

1400×1050p@60

1440×900p@60/75

1600×900p@60RB

1600×1200p@60

1680×1050p@60

1920×1080i@50/60

1920×1080p@24/25/30

1920×1080p@50/60



























Output

HDMI

























10



































Input

HDMI

















Supported Resolutions (Hz)

1920×1200p@60RB

2560×1440p@60RB

2560×1600p@60RB

2048×1080p@24/25/30

2048×1080p@50/60

3840×2160p@24/25/30

3840×2160p@50/60 (4:2:0)

3840×2160p@24, HDR10

3840×2160p@50/60 (4:2:0), HDR10

3840×2160p@50/60

4096×2160p@24/25/30

4096×2160p@50/60 (4:2:0)

4096×2160p@24, HDR10

4096×2160p@50/60 (4:2:0), HDR10

4096×2160p@50/60

























Input

HDMI























Output

HDMI















11

8.3 Audio Specifications

8.3.1 Digital Audio

HDMI Input/Output

LPCM

Max Channels 8 Channels

Sampling Rate (kHz) 32, 44.1, 48, 88.2, 96, 176.4, 192

Bitstream

Supported Formats Standard & High-Definition

8.4 Cable Specifications

Cable Length

High Speed HDMI Cable

HDMI Input

HDMI Output

8-bit

15m

15m

1080p

12-bit

10m

10m

4K30

(4:4:4)

8-bit

5m

5m

4K60

(4:4:4)

8-bit

3m

3m

Bandwidth Category Examples:

• 1080p (FHD Video)

- Up to 1080p@60Hz, 12-bit color

- Data rates lower than 5.3Gbps or below 225MHz TMDS clock

• 4K30 (UHD Video)

- 4K@24/25/30Hz & 4K@50/60Hz (4:2:0), 8-bit color

- Data rates higher than 5.3Gbps or above 225MHz TMDS clock but below 10.2Gbps

• 4K60 (UHD+ Video)

- 4K@50/60Hz (4:4:4, 8-bit)

- 4K@50/60Hz (4:2:0, 10-bit HDR)

- Data rates higher than 10.2Gbps

12

AV

CEC

CLI

DVI

EDID

HDCP

HDMI

HDR

HDTV

LED

LPCM

UHD

UHD+

UHDTV

USB

VGA

WUXGA (RB)

9. ACRONYMS

ACRONYM

ASCII

XGA

COMPLETE TERM

American Standard Code for Information

Interchange

Audio/Video

Consumer Electronics Control

Command-Line Interface

Digital Visual Interface

Extended Display Identification Data

High-bandwidth Digital Content Protection

High-Definition Multimedia Interface

High Dynamic Range

High-Definition Television

Light-Emitting Diode

Linear Pulse-Code Modulation

Ultra-High-Definition (10.2Gbps)

Ultra-High-Definition Plus (18Gbps)

Ultra-High-Definition Television

Universal Serial Bus

Video Graphics Array

Widescreen Ultra Extended Graphics Array

(Reduced Blanking)

Extended Graphics Array

13

CYPRESS TECHNOLOGY CO., LTD.

www.cypress.com.tw