Fiber Glass System/Smith Fibercast 0120802060 3 in. Spigot x Grooved Fiberglass Adapter Specification
Add to My manuals20 Pages
advertisement
HP 16 Epoxy Fittings
(Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems)
O I L & G A S
C H E M I C A L
& I N D U S T R I A L
M A R I N E O F F S H O R E
F U E L
H A N D L I N G
M I N I N G
Fiber Glass Systems provides a broad range of low pressure fiberglass fittings and accessories to accompany our low pressure line pipe. This allows for a complete corrosion free piping system. All of these fittings are manufactured using the filament winding or molded method of fabrication, using premium glass fibers, and quality epoxy resins. This ensures maximum pressure capabilities of these composite elements.
General Notes :
1. 2”-16” Green Thread™ HP fittings are be used with both Green Thread HP and Red Thread™ HP piping. Refer to “Chemical Resistance Guide”,
Bulletin No. ENG5615, for chemical recommendations.
2. 2”-16” Red Thread HP fittings may be used only on Red Thread HP piping.
3. 1”-1½” fittings are available in Green Thread HP products only. All fitting ratings are for 200°F (93°C). Red Thread fittings are serviceable up to 210°F (98.9°C) by applying a 0.92 de-rating factor. Green Thread fittings are serviceable up to 230°F (110°C) by applying a 0.76 de-rating factor.
90° Elbow
(1) -
1"-16" parts are available in Green Thread HP ONLY
Pipe
Size A B C D
Bolt
Hole
Size in mm in mm in mm in mm in mm in mm
1 25 2¾ 70 3½ 89 ¾ 19 3⅛ 79 ⅝ 16 4
# of
Bolts
1½ 40 3⅜ 86 4 102 ¾ 19 3⅞ 98 ⅝ 16 4
2 50 3⅜ 86 4½ 114 ¾ 19 4¾ 121 ¾ 19 4
3 80 4⅝ 117 5½ 140 1⅜ 35 6 152 ¾ 19 4
O
5
6
(3)
X (2)
GT Pipe in mm in mm in mm lb kg lb kg lb kg psig bar
4¼ 108 1 25 -
127 1⅛ 29
152 1⅝ 41
-
X (2)
RT Pipe
-
-
1⅝ 41
Weight
BxB
0.4
0.6
1.2
0.2
0.3
0.5
Weight
BxF
1.0
1.5
2.5
0.5
0.7
1.1
Weight
FxF
1.7
2.4
3.6
0.8
1.1
1.6
Steady
Pressure
435 30
435 30
435 30
7 ½ 190 1⅞ 48 1¾ 44 2.3
1.0
4.6
2.1
10 4.5
435 30
4 100 5⅛ 130 6½ 165 1⅜ 35 7½ 190 ¾ 19 8
6 150 6⅛ 156 8 203 1½ 38 9½ 241 ⅞ 22 8
9 229 2 51 1⅝ 41 3.3
1.5
6.4
2.9
15.9 7.2
232 16
11 279 2¼ 57 2¼ 57 7.2
3.3
11.8 5.4
15.9 7.2
232 16
8 200 11⅝ 295 9 229 1¾ 44 11¾ 298 ⅞ 22 8 13½ 343 3 76 3⅜ 86 10.9 4.9
15.4 7.0
19.9 9.0
232 16
10 250 13 330 11 279 2 51 14¼ 362 1 25 12 16 406 3¼ 83 3½ 89 14.9 6.8
23.8 10.8 32.8 14.9 232 16
12 300 14 356 12 305 2¼ 57 17 432 1 25 12 19 483 3⅜ 86 3⅞ 98 22.6 10.3 38.3 17.4 54.0 24.5 232 16
14 350 19 483 14 356 2½ 64 18¾ 476 1⅛ 29 12 20¾ 527 5⅜ 137 5½ 140 26.5 12.0 45.0 20.4 65.0 29.5 232 16
16 400 20¼ 514 15 381 2½ 64 21¼ 540 1⅛ 29 16 23¼ 591 5½ 140 5½ 140 45.0 20.4 65.0 29.5 108 49.0 232 16
(1) ”A” dimensions shown are for Green Thread HP fittings. 1”-6” fittings are compression molded; 8”-16” fittings are filament wound. 1”-6” filament wound fittings are in CI1370.
(2) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
(3) Flanges should be joined to flat-faced flanges. When joining to raised-faced flange connections, consult installation or engineering manuals. Bolt torque, gasket thickness and hardness recommendations are in Manual INS6000.
View of Fitting Illustrations
90° Elbow [email protected]
nov.com/fgs
2 HP 16 Epoxy Fittings
45° Elbow
(1) -
1"-16" parts are available in Green Thread HP ONLY
Pipe
Size A B C D
Bolt
Hole
Size in mm in mm in mm in mm in mm in mm
1 25 2⅜ 60 2 51 ¾ 19 3⅛ 79 ⅝ 16 4
# of
Bolts
1½ 40 2⅞ 73 2¼ 57 ¾ 19 3⅞ 98 ⅝ 16 4
2 50 2⅝ 67 2½ 64 ¾ 19 4¾ 121 ¾ 19 4
3 80 3¾ 95 3 76 1⅜ 35 6 152 ¾ 19 4
4 100 3⅞ 98 4 102 1⅜ 35 7½ 190 ¾ 19 8
6 150 4⅜ 111 5 127 1½ 38 9½ 241 ⅞ 22 8
O (3)
X (2)
GT Pipe
X (2)
RT Pipe
Weight
BxB
Weight
BxF
Weight
FxF
Steady
Pressure in mm in mm in mm lb kg lb kg lb kg psig bar
4¼ 108 1 25 0.3
0.14 0.8
0.36 1.4
0.64 435 30
5 127 1⅛ 29 0.4
0.18 1.2
0.54 2.0
0.91 435 30
6 152 1⅝ 41 1⅝ 41 0.9
0.41 1.9
0.86 2.8
1.27 435 30
7½ 190 1⅞ 48 1¾ 44 1.6
0.73 3.5
1.59 7.9
3.58 435 30
9 229 2 51 1⅝ 41 2.4
1.09 5.1
2.31 13.1 5.94 232 16
11 279 2¼ 57 2¼ 57 4.8
2.18 8.4
3.81 12.5 5.67 232 16
8 200 8⅛ 206 5½ 140 1¾ 44 11¾ 298 ⅞ 22 8 13½ 343 3 76 3⅜ 86 6.9
3.11 11.9 5.4
16.8 7.62 232 16
10 250 8⅝ 219 6½ 165 2 51 14¼ 362 1 25 12 16 406 3¼ 83 3½ 89 8.9
4.04 18.5 8.39 28.2 12.79 232 16
12 300 9½ 241 7½ 190 2¼ 57 17 432 1 25 12 19 483 3⅜ 86 3⅞ 98 14.0 6.35 32.6 14.8 47.2 21.41 232 16
14 350 12½ 318 7½ 191 2½ 64 18¾ 476 1⅛ 29 12 20¾ 527 5⅜ 137 5½ 140 17.0 7.71 46.0 20.9 73.0 33.11 232 16
16 400 13¼ 337 8 203 2½ 64 21¼ 540 1⅛ 29 16 23¼ 591 5½ 140 5½ 140 25.0 11.3 56.0 25.4 84.0 38.1 232 16
(1) ”A” dimensions shown are for GREEN THREAD HP fittings. 1”-6” fittings are compression molded; 8”-16” fittings are filament wound. 1”-6” filament wound fittings are in CI1370.
(2) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
(3) Flanges should be joined to flat-faced flanges. When joining to raised-faced flange connections, consult installation or engineering Manuals INS1000 & ENG1000. Bolt torque, gasket thickness and hardness recommendations are in Manual INS1000.
View of Fitting Illustrations
Reducing Tee
HP 16 Epoxy Fittings
Tee
(1) -
1"-16" parts are available in Green Thread HP ONLY
Pipe
Size A B C D
Bolt
Hole
Size in mm in mm in mm in mm in mm in mm
1 25 2¾ 70 3½ 89 ¾ 19 3⅛ 79 ⅝ 16 4
1½ 40 3⅜ 86 4 102 ¾ 19 3⅞ 98 ⅝ 16 4
2 50 3⅜ 86 4½ 114 ¾ 19 4¾ 121 ¾ 19 4
3 80 4⅝ 117 5½ 127 1⅜ 35 6 152 ¾ 19 4
4 100 5⅛ 130 6½ 165 1⅜ 35 7½ 190 ¾ 19 8
6 150 6⅛ 156 8 203 1½ 38 9½ 241 ⅞ 22 8
# of
Bolts
O in
(3)
X (2)
GT Pipe
X (2)
RT Pipe
Weight
3B mm in mm in mm lb
Weight
1F kg lb
Weight
2F kg lb
Weight
3F kg lb
Steady
Pressure kg psig bar
4¼ 108 1 25 -
5 127 1⅛ 29 -
0.5 0.2 1.1 0.5 1.8 0.8 2.5 1.1 435 30
0.9 0.4 1.9 0.9 2.8 1.3 3.6 1.6 435 30
6 152 1⅝ 41 1⅝ 41 1.9 0.9 3.1 1.4 4.8 2.2 5.5 2.5 435 30
7½ 190 1⅞ 48 1¾ 44 3.6 1.6 5.8 2.6 8.0 3.6 14.5 6.6 435 30
9 229 2 51 1⅝ 41 4.9 2.2 8.0 3.6 11.3 5.1 22.7 10.3 232 16
11 279 2¼ 57 2¼ 57 10.1 4.6 14.3 6.5 19.0 8.6 22.3 10.1 232 16
8 200 11⅝ 295 9 229 1¾ 44 11¾ 298 ⅞ 22 8 13½ 343 3 76 3⅜ 86 16.1 7.3 20.4 9.3 24.6 11.2 28.9 13.1 232 16
10 250 13 330 11 279 2 51 14¼ 362 1 25 12 16 406 3¼ 83 3½ 89 26.2 11.9 34.1 15.5 42.0 19.1 49.8 22.6 232 16
12 300 14 356 12 305 2¼ 57 17 432 1 25 12 19 483 3⅜ 86 3⅞ 98 31.8 14.4 47.1 21.4 62.5 28.3 77.8 35.3 232 16
14 350 19 483 14 356 2½ 64 18¾ 476 1⅛ 29 12 20¾ 527 5⅜ 137 5½ 140 52.0 23.6 75.5 34.2 99.5 45.1 127 57.6 232 16
16 400 20¼ 514 15 381 2½ 64 21¼ 540 1⅛ 29 16 23¼ 591 5½ 140 5½ 140 68.0 30.8 107 48.5 135 61.2 170 77.1 232 16
(1) ”A” dimensions shown are for Green Thread HP fittings. 1”-6” fittings are compression molded; 8”-16” fittings are filament
wound. 1”-6” filament wound fittings are in CI1370.
(2) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
(3) Flanges should be joined to flat-faced flanges. When joining to raised-faced flange connections, consult installation or engineering Manuals INS1000 & ENG1000. Bolt torque, gasket thickness and hardness recommendations are in Manual INS1000 are in Manual INS6000.
3
View of Fitting Illustrations
Tees [email protected]
nov.com/fgs
4 HP 16 Epoxy Fittings
Reducing Tee
(1) -
1"-16" parts are available in Green Thread HP ONLY
Pipe
Size in mm
AT in
X
1
GT Pipe (1) mm in mm
X in
1
RT Pipe (1) mm
AS in
8 x 6 200 x 150 11 ⅝ 295 3 76 3 ⅜ 86 mm
10 ¼ 260
X
2
GT Pipe (1) X
2
RT Pipe (1) Weight in
2 7/8 mm in
73 2 7/8 mm lb
73 23 kg
Steady
Pressure psig
10.4
232 bar
16
8 x 4 200 x 100 11 ⅝ 295 3 76 3 ⅜ 86 10 ¼ 260 4 ⅜ 111 4 102 21 9.5
232 16
8 x 3 200 x 80
8 x 2 200 x 50
11 ⅝ 295
11 ⅝ 295
10 x 8 250 x 200 13 1/16 332
10 x 6 250 x 150 13 1/16 332
3
3
3 ¼
3 ¼
76
76
83
83
3 ⅜
3 ⅜
3 ½
3 ½
86
86
89
89
9 ⅞
9 13/16
13 ⅝
11 ¾
251
249
346
298
3
1 ½
3
2 7/8
76
38
76
73
2 7/8
1 ½
3 ⅜
2 7/8
73
38
86
73
20
19
39
36
9.1
8.6
17.7
16.3
232
232
232
232
16
16
16
16
10 x 4 250 x 100 13 1/16 332
10 x 3 250 x 80 13 1/16 332
12 x 10 300 x 250 13 15/16 354
12 x 8 300 x 200 13 15/16 354
12 x 6 300 x 150 13 15/16 354
12 x 4 300 x 100 13 15/16 354
14 x 12 350 x 300 19 1/16 484
14 x 10 350 x 250 19 1/16 484
3 ¼
3 ¼
3 ⅜
3 ⅜
3 ⅜
3 ⅜
5 ⅜
5 ⅜
83
83
86
86
86
86
137
137
3 ½
3 ½
3 7/8
3 7/8
3 7/8
3 7/8
5 ½
5 ½
89
89
98
98
98
98
140
140
11 ¾
11 ⅜
15 ⅛
13 ¼
13 ¼
298
289
15 1/16 383
383
337
337
15 15/16 405
15 9/16 395
4 ⅜
3
3 ¼
3
2 7/8
4 ⅜
3 ⅜
3 ¼
111
76
83
76
73
111
86
83
4
2 7/8
3 ½
3 ⅜
2 7/8
4
3 7/8
3 ½
102
73
89
86
73
101
98
89
33
32
51
48
45
42
67
64
14.9
14.5
23.1
21.8
20.4
19.1
30.4
29.0
232
232
232
232
232
232
232
232
16
16
16
16
16
16
16
16
14 x 8 350 x 200 19 1/16 484
14 x 6 350 x 150 19 1/16 484
16 x 14 400 x 350 20 ¼ 514
16 x 12 400 x 300 20 ¼ 514
16 x 10 400 x 250 20 ¼ 514
16 x 8 400 x 200 20 ¼ 514
5 ⅜
5 ⅜
5 ½
5 ½
5 ½
5 ½
137
137
140
140
140
140
5 ½
5 ½
5 ½
5 ½
5 ½
5 ½
140
140
140
140
140
140
15 ⅝ 390
13 ¾ 349
19 ½ 495
16 15/16 430
16 ⅝ 422
16 ⅝ 422
3
2 7/8
5 ⅜
3 ⅜
3 ¼
3
76
73
137
86
83
76
3 ⅜
2 7/8
5 ½
3 7/8
3 ½
3 ⅜
86
73
140
98
89
86
60
57
103
99
94
90
27.2
232
25.9
232
46.7
232
44.9
232
42.6
232
40.8
232
16
16
16
16
16
16
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
View of Fitting Illustrations
Reducing Tee
HP 16 Epoxy Fittings
Flanges
12
14
16
6
8
10 in
1
1 1/2
2
3
4
Pipe
Size B C CC D
E
Bolt Hole
Size - # O in in
1 3/4 3/4 in
3/4
1 3/4 3/4
2 1/4 3/4
2 5/8 1 3/8
3/4
3/4
1
2 5/8 1 3/8 1 in
3 1/8
3 7/8
4 3/4
6
7 1/2 in-no.
5/8 - 4
5/8 - 4
3/4 - 4
3/4 - 4
3/4 - 8 in
4 1/4 in
1
5 1
6 1 ⅝
7 1/2 1 7/8
9 2
3
4
1 1/2 1 1/8
4 3/4 2 1 1/4
9 1/2
1 3/4 1 1/8 11 3/4 7/8 - 8
14 1/4
7/8 - 8
1 - 12
11 2 ½
13 1/2 2 3/8
16 3 7/8
5 2 1/4 1 1/4 17 1 - 12 19 3 7/8
3 1/8 2 1/2 1 7/8 18 3/4 1 1/8 - 12 20 3/4 -
3 1/8 2 1/2 2 1/4 21 1/4 1 1/8 - 16 23 1/4 -
X (1)
GT Pipe
M
X (1)
RT Pipe
Bolt
Torque (2) ft-lbs
Weight
Flange
Wt.
Blind
Flange FW M FW M FW in
1
1 1/8 20
1 ⅝ 1 ⅝ 1 ⅝ 25
1 7/8 1 ¾ 1 ¾ 25
2 3/8 1 ⅝ 1 ⅝ 25
2 ¼
2 1/8
3 1/8
in
2 ¼
2 7/8
4 1/8
in
2 ¼
2 ⅝ min max lbs lbs lbs
20 25 0.6
0.6
0.8
25
80
3 3/8 80
25
30
30
0.9
1.3
2.6
0.9
1.3
3.4
0.9
1.3
3
4 30 3.6
4.9
30 4.4
6.5
100 9.3
11
100 16
6.6
10.6
15.8
16.3
2 7/8 4
3 -
3 -
3 1/8 80
3 80
3 80
100 24
100 -
100 -
25.8
24
30.7
44.8
37 67.3
232
232
232
-
-
232
435
435
435
435
232
Steady
Pressure Rating (psi)
M FW Blind psig
435
435
300
300
435 (4) 300
300 (4) 300
232 (4) 150
232
232
(4) 150
135
232
232
232
232
95
65
150
150
(3)
Pipe
Size B C CC D
E
Bolt Hole
Size - # O
X (1)
GT Pipe
M FW
X
M
(1)
RT Pipe
FW
Bolt
Torque
N-m
(2)
Weight
Flange
M FW
Wt.
Blind
Flange
Steady
Pressure Rating (psi)
M
100
150
200
250
300
350
400 mm mm mm mm mm mm
25
40
50
80
44
44
57
19
19
19
19
19
19
67 35 25
79
98
152
16 D - 4
16 D - 4
121 19 D - 4 mm
127
152 mm
108 25
25
41 mm
25
29
41
-
mm mm min
41
-
-
41
27
27
34
19 D - 4 191 48 48 44 44 34 max kg
34
34
41
41
0.27
0.41
0.59
1.18
kg
0.27
0.41
0.59
1.54
kg
0.36
0.41
0.59
1.36
67
76
102
35 25 191 19 D - 8 229
38 29 241 22 D - 8 279
51
64
60
57
41
57
41 34
57 34
44 29 298 22 D - 8 343 60 54 73 67 41
41 1.63
2.22
1.81
41 2.00
2.95
2.99
135 4.22
4.99
4.81
121 51 32 362 25 D - 12 406
127 57 32 432
98 79 105 86 108 135 7.26
7.17
7.39
16
25 D - 12 483 98 73 102 79 108 135 10.89 11.7
10.89
16
79 64 48 476 28 D - 12 527 -
79 64 57 540 28 D - 16 594 -
76
76
-
-
76 108
76 108
135
135 -
13.93 20.32
16.78 30.53
-
-
16
16
16
30
30
30
30
FW
30
30 bar
30 (4)
21
16
16
16
16
16
16
16
(4)
(4)
(4)
Blind
20.7
20.7
20.7
20.7
10.3
10.3
9.3
6.5
4.5
10.3
10.3
(3)
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimension.
(2) Flanges should be joined to flat-faced flanges. When joining to raised-faced flange connections, consult FGS installation or engineering Manuals INS1000
& ENG1000. Bolt torque, gasket thickness and hardness recommendations are in Manual INS1000.
(3) Steel back-up plates must be used to achieve pressure ratings equivalent to the pipe.
(4) Heavy duty ANSI 16.5 Class 150 and 300 flanges rated to 450 psig (3.10 MPa) are available. Dimensions are shown in the “Heavy Duty Flange Dimensions” table.
The maximum bolt torque for 2”-6” is 100 ft. lbs.
All flanges meet ANSI B16.5 Class 150 Bolt Hole Standards. The following flanges are available as standard parts:
Flanges: 1”-12” Green Thread HP
2”-6” Red Thread HP
14”-16” Red Thread or Green Thread HP
Blind Flanges: 1”-12” Green Thread HP
14”-16” Red Thread or Green Thread HP
Compression Molded (M) or Filament Wound (FW)
Filament Wound (FW)
Filament Wound (FW)
Compression Molded (M)
Contact Molded (M)
Heavy Duty Flange
Dimensions
Sizes in
2
B in
3
C in
2 3/4
3
4
6
3 1/4 3
4 3/4 3 1/2
4 1/4 4
View of Fitting Illustrations
5
Flange [email protected]
nov.com/fgs
6 HP 16 Epoxy Fittings
Orifice Flanges
-
2”-8” parts are available inGreen Thread HP ONLY (Note: the 2” orifice flange has only one orifice)
Pipe
Size B C D
E
Bolt Hole
Size -
# of Holes H (NPT) J O
X (2)
GT Pipe
X (2)
RT Pipe
Flange
Bolt Torque (2) ft-lbs (N-M (2) ) Weight
Steady
Pressure
Rating
(psi) in mm in mm in mm in mm in-no. mm-no. in mm in mm in mm in mm in mm to seal max
2 50 4¼ 108 2 51 4¾ 121 ¾ - 4 19 - 4 ½ 12.7 1 25 6 152 1⅝ 41 1⅝ 41 25 34 30 41 lbs kg M FW
3.6 1.6 435 30
3 80 5 127 2 51 6 152 ¾ - 4 19 - 4 ½ 12.7 1 25 7½ 191 1⅞ 48 1⅜ 35 25 34 30 41 5.3 2.4 435 30
4 100 5 127 2 51 7½ 191 ¾ - 8 19 - 8 ½ 12.7 1 25 9 229 1⅝ 41 2 51 25 34 30 41 6.6 3.0 232 16
6 150 6 152 2 51 9½ 241 ⅞ - 8 22 - 8 ½ 12.7 1 25 11 279 2¼ 57 2¼ 57 25 34 30 41 8.8 4.0 232 16
8 200 8¾ 222 2 51 11¾ 298 ⅞ - 8 22 - 8 ½ 12.7 1 25 13½ 343 3⅛ 79 3½ 89 30 41 100 135 14.5 6.6 232 16
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
(2) Flanges should be joined to flat-faced flanges. When joining to raised-faced flange connections, consult installation or engineering Manuals INS1000 & ENG1000. Gasket thickness and hardness recommendations are in Manual INS1000.
Stub Ends
Nominal
Pipe Size
3
4 in
2
6 mm
50
80
100
150
Pressure
Rating psi
250
200
150
150 bar
17
14
10
10
Bolt Torque ft-lb
66
66
66
111
A kg-mm in
98 2.75
98
98
165
2.88
2.88
3.88
mm
70
73
73
99
B in
0.27
0.28
0.28
0.39
7
7 mm
7
10
D in
3.91
5.16
6.66
8.53
mm
99
131
169
217
X in
2.13
2.26
2.1
3.69
mm
54
57
53
94
Weight lbs
0.5
0.7
1.0
2.4
kg
0.22
0.31
0.45
1.08
Flange Rings
-
ANSI B16.5 Class 150
Nominal
Pipe Size
3
4 in
2
6 mm
50
70
100
150
A in
2.78
3.90
4.90
7.26
mm
71
99
124
184
B in
0.82
1.10
1.10
1.25
mm
21
28
28
32
E in
6.0
7.5
9.0
11.0
mm
152
191
229
279
Bolt Hole Size in
3/4
3/4
3/4
7/8 mm
19
19
19
22
4
8
#
4
8
# of
Holes Weight lbs
1.1
2.1
2.9
3.8
kg
0.50
0.95
1.32
1.73
View of Fitting Illustrations
Orfice Flange
H
A
B
Stub End
D
X
Flange Rings
B
E A
HP 16 Epoxy Fittings
Nipples
-
ANSI B16.5 Class 150
Size Close
3
4
6
8
10
12
14
16 in
1 mm
25
1 ½ 40
2 50
GT
2 ½
3 ⅛
4 ½
80
100
150
200
250
300
350
400
5 ⅛
5 ⅜
6 ⅛
5 ⅛
5 ⅜
6 ⅛
8 ⅝ 9 ⅜
9 ⅜ 9 ⅜
9 ⅜
-
-
RT
-
-
X
10 ¼
X
-
4"
GT
-
-
-
-
-
-
-
-
-
-
-
6"
GT - Green Thread, RT - Red Thread, X - Standard available size
(3) Actual length 4 ¼”
(4) Actual length 6 ¼”
(5) Actual length 6 ⅛”
-
-
-
-
-
RT
-
-
X (3)
-
-
-
GT
X
X
X
-
-
-
RT
-
-
X
X
X
X (4)
X
X (4) X (5)
-
-
-
-
-
-
8"
X
-
-
X
X
GT
X
X
X
-
-
-
10"
-
-
-
-
-
GT
-
-
-
-
-
-
X
-
-
X
X
RT
-
-
X
-
-
-
X
-
-
X
X
RT
-
-
X
-
-
-
12"
X
X
X
-
-
GT
-
-
-
X
-
-
X
X
X
X
X
RT
-
-
X
X
-
-
16"
-
X
X
-
-
GT
-
-
-
X
X
X
X
X
-
-
-
RT
-
-
-
X
X
X
24"
-
-
-
-
-
GT
-
-
-
-
-
-
X
X
-
-
-
RT
-
-
-
X
X
X
36"
-
-
-
-
-
GT
-
-
-
-
-
-
-
-
X
-
-
RT
-
-
-
X
X
X
Sleeve Couplings - Green Thread HP
Pipe Size A B X (1) Weight
Steady
Pressure in mm in mm in mm lbs kg psig bar
1 25 2 ¾ 70 1 ½ 38 1
1 ½ 40 3 ¼ 83 2 52
25
1 ⅛ 29
0.1
0.1
0.05 435 30
0.05 435 30
2 50 4 ⅞ 124 2 ⅝ 67 1 ⅝ 41 0.4
0.18 435 30
3 80 5
4 100 5
6 150 7
8 200 10
127 3 ¾
127 4 ¾
178 6 ⅞
254 9
95 2
121 2
51
51
175 2 ¼ 57
229 3 ⅛ 79
0.8
0.9
1.9
3.4
0.36 435 30
0.41 232 16
0.86 232 16
1.54 232 16
10 250 10 ½ 268 11
12 300 11
279 3 ⅛ 79
279 13 ⅛ 333 3 ¼ 83
5.2
7.5
2.36 232 16
3.40 232 16
14 350 12 ½ 318 15
16 400 13
381 3 ⅞ 98 11.2 5.08 232 16
330 17 ⅛ 435 4 ⅛ 105 16.0 7.26 232 16
Sleeve Couplings - Red Thread HP
Pipe Size A B X (1) Weight
Steady
Pressure in mm in
1 25 -
1 ½ 40 -
2 50 6
-
mm in
-
-
-
mm
-
-
-
-
-
lbs
-
kg
-
psig bar
-
-
152 2 ⅝ 67 1 ⅝ 41 0.40 0.18 435 30
3 80 6
4 100 7
152 3 ¾ 95 1 ⅞ 48 0.80 0.36 435 30
178 4 ⅞ 124 2 51 1.40 0.64 435 30
6 150 8 ⅜ 213 7 ⅛ 181 2 ¾ 70 2.80 1.27 435 30
8 200 10 254 9 229 2 ⅞ 73 3.30 1.50 232 16
10 250 10 ½ 268 11 ⅛ 283 3 ⅜ 86 4.70 2.13 232 16
12 300 11 279 13 ⅛ 333 3 ½ 89 6.80 3.08 232 16
14 350 12 ½ 318 15
16 400 13
381 4 102 11.2 5.08 232 16
330 17 ⅛ 435 4 ⅛ 105 16.0 7.26 232 16
7
View of Fitting Illustrations
Nipple Sleeve Coupling [email protected]
nov.com/fgs
8 HP 16 Epoxy Fittings
Adapter (Bell x Male)
-
1” and 1 ½” parts are available in Green Thread ONLY; 2”-8” parts are available in Green Thread or Red Thread HP
Pipe Size A
6
8 in
1 mm in
25 3 ½
1 ½ 40
2
3
4
50
80
100
3 ¾
4 ¼
5 ½
5 ½
150 6
200 9 ¼ mm
89
99
108
140
140
152
235
B
6
8 in
1
1 ½
2
3
4 mm
25
38
51
76
102
152
203
X (1)
GT Pipe in
1
1 ⅛
1 ⅝
1 ⅞
2
2 ¼
3 ⅛ mm
25
29
41
48
51
57
79
X (1)
RT Pipe
in
-
1 ⅜
1 ⅜
1 ⅝
2 ¼
3 ½
mm
-
35
35
41
57
89
Weight
GT lbs
0.1
0.3
0.4
0.9
1.6
2.6
7.2
kg
0.05
0.14
0.18
0.41
0.73
1.18
3.27
Weight
RT
lbs
-
0.3
0.6
1.0
1.8
6.6
kg
-
0.14
0.27
0.45
0.82
2.99
Steady
Pressure Rating psig
435
435
435
300
232
232
232 bar
30
30
30
20.7
16
16
16
Adapter (Spigot x Male)
-
1” and 1 ½” parts are available in Green Thread ONLY; 2”-8” parts are available in Green Thread or Red Thread HP
Pipe Size A in mm in
4
6
8
2
3
1 25
1 ½ 40
50
80
100 4 ⅞
150 6 ⅞
200 8
2 ⅝
2 ¾
3 ⅝
4 ⅝ mm
67
70
92
117
124
175
203
B in
4
6
8
2
3
1
1 ¼ mm
25
38
51
76
102
152
203
X (1)
GT Pipe
-
-
-
-
-
-
in
-
-
-
-
-
-
mm
X (1)
RT Pipe
-
-
-
in
-
-
-
-
-
-
-
-
-
mm
Weight
GT lbs
0.1
0.3
0.4
0.9
1.1
2.6
5.6
kg
0.05
0.14
0.18
0.41
0.5
1.18
2.54
Weight
RT
-
lbs
0.3
0.6
1
2
4.9
-
kg
0.1
0.2
0.4
0.9
2.2
Steady
Pressure Rating psig
435
435
435
300
232
232
232 bar
16
16
16
30
30
30
20.7
Adapter (Bell x Female)
-
1” and 1 ½” parts are available in Green Thread ONLY; 2”-8” parts are available in Green Thread or Red Thread HP
Pipe Size
6
8
3
4 in
1
A mm in
25
1 ½ 40
2 50
2 ⅝
2 ¾
3 ½
80 4 ½
100 4 ½
150 5 ½
200 7 mm
67
70
89
114
114
140
178 -
-
B
-
-
-
-
in
-
-
-
-
-
-
mm
X (1)
GT Pipe in
1
1 ⅛
1 ⅝
1 ⅞
2
2 ¼
3 ⅛ mm
25
29
41
48
51
57
79
-
-
X (1)
RT Pipe in
1 ⅜
1 ⅜
1 ⅝
2 ¼
3 ½
-
mm
35
35
41
57
89
Weight
GT lbs
0.1
0.3
0.6
0.6
0.6
1.9
5.1
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
kg
0.05
0.14
0.27
0.27
0.27
0.86
2.31
Weight
RT
lbs
-
0.3
0.5
0.5
1.3
3.5
kg
-
0.1
0.2
0.2
0.6
1.6
Steady
Pressure Rating psig
435
435
435
300
232
232
150 bar
30
30
30
20.7
16
16
10.3
View of Fitting Illustrations
Adapter (Bell x Male) Adapter (Spigot x Male) Adapter (Male x Female)
HP 16 Epoxy Fittings
Adapter (Spigot x Female)
-
1” and 1½” parts are available in Green Thread ONLY; 2”-8” parts are available in Green Thread or Red
Thread HP; 10” and 12” are available in Red Thread HP
Pipe Size A in mm in
2
3
4
6
8
1 25
1 ½ 40
50
80
3 ⅞
4 ¾
100 4 ⅞
150
200
3 ⅝
4
6 ¾
10 mm
92
102
98
121
124
171
254
B in
6
8
1
1 ½
2
3 ⅛
4 ⅛ mm
25
38
51
76
102
152
203
X (1)
GT Pipe
-
-
-
-
-
-
in
-
-
-
-
-
-
mm
X (1)
RT Pipe
-
-
-
-
-
-
in
-
-
-
-
-
-
mm
Weight
GT lbs
0.2
0.3
0.4
0.8
1.0
3.4
8.0
kg
0.09
0.14
0.18
0.36
0.45
1.54
3.63
Weight
RT
lbs
-
0.3
0.5
0.6
2.6
7.1
kg
-
0.14
0.23
0.27
1.18
3.22
Steady
Pressure Rating psig
435
435
435
290
232
232
150 bar
30
30
30
20.7
16
16
10
Adapter (Bell x Grooved
(2)
)
-
1” and 1½” parts are available in Green Thread ONLY; 2”-8” parts are available in Green Thread or Red
Thread HP; 10” and 12” are available in Red Thread HP
Pipe Size A in mm in
3
4
6
1
1 ½
2
25
40
50
80
3 ½
3 ⅞
4 ¼
5
100 5
150 5 ⅝
8
10
200 8 ¼
250 8 ¼ mm
127
143
210
210
89
98
108
127
B in
⅞
1½
2
3
4
6
8
10 ⅛ mm
102
152
203
257
22
38
51
76
X (1)
GT Pipe in
2
2 ¼
-
3 ⅛
1
1 ⅛
1 ⅝
1 ⅞
51
57
-
79 mm
25
29
41
48
X (1)
RT Pipe
in
-
1 ⅜
1 ⅜
1 ⅝
2 ¼
3 ½
3 ¾
41
57
89
95
mm
-
35
35
Weight
GT lbs
0.3
0.5
0.5
0.9
1.0
2.3
-
5.8
kg
0.14
0.23
0.23
0.41
0.45
1.04
-
2.63
Weight
RT
lbs
-
0.3
0.6
0.8
1.8
4.9
6.3
kg
-
0.14
0.27
0.63
0.84
2.22
2.86
Steady
Pressure Rating psig
232
232
232
190
435
435
435
290 bar
30
30
30
20.7
16
16
16
13.1
Adapter (Spigot x Grooved
(2)
)
-
1” and 1½” parts are available in Green Thread ONLY; 2”-8” parts are available in Green Thread or
Red Thread HP; 10” and 12” are available in Red Thread HP
Pipe Size in
A mm in
3
4
6
8
1
1 ½
2
25
40
50
80
100 4 ½
150 5
200 7
2 ¾
3 ⅛
3 ⅝
4 ¼
10
12
250 7
300 7 mm
70
79
92
127
114
127
178
178
178
B in
4
6
8
⅞
1 ½
2
3
10 ⅛
12 mm
22
38
51
76
102
152
203
257
305
-
-
-
-
-
-
-
-
-
X (1)
GT Pipe in
-
-
-
-
-
-
-
-
mm
-
-
-
-
-
-
-
-
X (1)
RT Pipe
in
-
-
-
-
-
-
-
-
mm
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
(2) Compatible with Victaulic® HP70ES couplings.
Weight
GT
-
-
1.0
2.6
4.4
lbs
0.1
0.2
0.3
0.9
-
-
0.45
1.18
2 kg
0.05
0.09
0.14
0.41
Weight
RT
0.9
2.0
4.1
5.6
6.8
lbs
-
0.3
0.6
0.41
0.91
1.86
2.54
3.08
kg
-
0.14
0.27
Steady
Pressure Rating psig
435
435
435
290
232
232
232
190
150 bar
16
16
16
30
30
30
20
13.1
10.3
View of Fitting Illustrations
9
Adapter - Spigot x Female Adapter - Bell x Grooved Adapter - Spigot x Grooved [email protected]
nov.com/fgs
10 HP 16 Epoxy Fittings
Concentric Reducer (Bell x Bell)
-
1”-16 parts are available in Green Thread ONLY
Pipe Size in
2 x 1 mm
50 x 25
2 x 1 ½ 50 x 40
3 x 1 80 x 25
3 x 1 ½ 80 x 40
3 x 2 80 x 50 6
4 x 1 ½ 100 x 40 7 ⅜
4 x 2 100 x 50 8¼
4 x 3
6 x 3
6 x 4
8 x 4
100 x 80
150 x 80
150 x 100
200 x 100
7
10 ⅞
9
14
A in
5 ½
5
6 ¼
6 ¼
8 x 6 200 x 150 15 ¼
10 x 6 250 x 150 15 ¼
10 x 8 250 x 200 16 ½
12 x 6 300 x 150 17 ⅛
12 x 8 300 x 200 18 ⅜
12 x 10 300 x 250 17 ¾
14 x 8 350 x 200 23 ½
14 x 10 350 x 250 22 ⅞
14 x 12 350 x 300 22 ¾
16 x 10 400 x 250 25 ⅛
16 x 12 400 x 300 25
16 x 14 400 x 350 28 mm
140
127
159
159
152
187
210
178
276
229
356
387
387
419
435
467
451
597
581
578
638
635
711
X (1)
GT Pipe in
1 ⅝
1 ⅝
1 ⅞
1 ⅞
1⅞
2
2
2
2 ⅞
2 ¼
3
3
3 ¼
3 ¼
3 ⅜
3 ⅜
3 ⅜
5 ⅜
5 ⅜
5 ⅜
5 1/2
5 1/2
5 1/2 mm
41
41
48
48
48
51
51
51
73
57
76
76
83
83
86
86
86
137
137
137
140
140
140
X (1)
GT Pipe in
1
1 ⅛
1
1 ⅛
1 ⅛
1 ⅛
1 ⅝
1 ⅞
1 ⅞
2
2
2 ⅞
2 ⅞
3
2 ⅞
3
3 ¼
3
3 ¼
3 ⅜
3 ¼
3 ⅜
5 3/8 mm
25
29
25
29
29
29
41
48
48
51
51
73
73
76
73
76
83
76
83
86
83
86
137
X (1)
RT Pipe in
1 ⅝
1 ⅝
1 ⅞
1 ¾
1 ⅞
1 ⅝
1 ⅝
1 ⅝
2 ⅞
2 ¼
3 ⅜
3 ⅜
3 ½
3 ½
3 ⅞
3 ⅞
3 ⅞
5 ½
5 ½
5 ½
5 1/2
5 1/2
5 1/2 mm
41
41
48
44
48
41
41
41
73
57
86
86
89
89
98
98
98
140
140
140
140
140
140
X (1)
RT Pipe in
NA
NA
NA
NA
1 ⅝
NA
1 ⅝
1 ⅞
1 ⅞
1 ⅝
1 ⅝
2 ⅞
2 ⅝
3 ⅜
2 ⅞
3 ⅜
3 ½
3 ⅜
3 ½
3 ⅞
3 ½
3 ⅞
5 3/8 mm
NA
NA
NA
NA
41
NA
41
48
48
41
41
73
67
86
73
86
89
86
89
98
89
98
137
Weight lbs
0.6
0.6
1.0
1.1
1.1
1.8
2.0
1.7
4.3
3.4
6.7
7.3
10.5
11.1
18.0
17.0
16.4
23.0
21.9
21.8
28.0
27.7
31.1
kg
0.27
0.27
0.45
0.5
0.5
0.82
0.91
3.31
4.76
5.03
8.16
0.77
1.95
1.54
3.04
7.71
7.44
232
232
10.43
232
9.93
232
232
232
232
232
435
232
232
232
232
232
232
Steady
Pressure Rating psig
435 bar
30
435
435
435
30
30
30
16
16
16
16
16
16
16
16
16
16
16
16
30
16
16
9.89
12.7
232
232
12.56
232
14.11
232
16
16
16
16
NOTE: MULTI-STEP reducers are available through 16” sizes. Information is available on request.
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
(2) Flanges should be joined to flat-faced flanges. When joining to raised-faced flange connections, consult installation or engineering manuals. Bolt torque, gasket thickness and hardness recommendations are in manual INS1000. These comments also apply to the flanged concentric reducers on the following page.
View of Fitting Illustrations
Concentric Reducer - Bell x Bell
HP 16 Epoxy Fittings 11
Concentric Reducer (Flanged
(2)
)
-
1”-16 parts are available in Green Thread ONLY
Pipe
Size in mm
2x1 50x25
2x1½ 50x40
B C D in mm in mm in mm in
E
Bolt Hole Size -
# of Holes mm
O in
G mm in
H mm in mm in
J
Bolt Hole Size -
# of Holes P mm in
Weight mm lbs kg
Steady
Pressure
Rating psig bar
5 127 ¾ 19 4 ¾ 121 ¾ - 4 19 - 4 6 152 ¾ 19 3 ⅞ 98 ⅝ - 4 16 - 4 4 ¼ 108 2.6
1.18 300 20.7
5 127 ¾ 19 4 ¾ 121 ¾ - 4 19 - 4 6 152 ¾ 19 3 ⅞ 98 ⅝ - 4 16 - 4 5 127 2.6
1.18 300 20.7
3x1½ 80x40
3x2 80x50
6 152 1 ⅜ 35 6
6 152 1 ⅜ 35 6
152 ¾ - 4
152 ¾ - 4
4x2 100x50 7 178 1 ⅜ 35 7 ½ 191 ¾ - 8
4x3 100x80 7 178 1 ⅜ 35 7 ½ 191 ¾ - 8
19 - 4 7 ½ 191 ¾ 19 4 ¾ 121 ¾ - 4 19 - 4 5
19 - 4 7 ½ 191 ¾ 19 4 ¾ 121 ¾ - 4 19 - 4 6
19 - 8 9
19 - 8 9
229 1 ⅜ 35 6
229 1 ⅜ 35 6
152 ¾ - 4 19 - 4 6
127 4.4
152 4.4
2.00 190 13.1
2.00 190 13.1
152 7.1
3.22 150 10.3
152 ¾ - 4 19 - 4 7 ½ 191 7.1
3.22 150 10.3
6x3 150x80 9 229 1 ½ 38 9 ½ 241 ⅞ - 8
6x4 150x100 9 229 1 ½ 38 9 ½ 241 ⅞ - 8
8x4 200x100 11 279 1 ¾ 44 11 ¾ 298 ⅞ - 8
8x6 200x150 11 279 1 ¾ 44 11 ¾ 298 ⅞ - 8
22 - 8 11 279 1 ⅜ 35 7 ½ 191 ¾ - 8 19 - 8 7 ½ 191 11.0 4.99 150 10.3
22 - 8 11 279 1 ⅜ 35 7 ½ 191 ¾ - 8 19 - 8 9 229 11.0 4.99 150 10.3
22 - 8 13 ½ 343 1 ½ 38 9 ½ 241 ⅞ - 8 22 - 8 9 229 17.6 7.98 232 16.0
22 - 8 13 ½ 343 1 ½ 38 9 ½ 241 ⅞ - 8 22 - 8 11 279 17.6 7.98 232 16.0
10x6 250x150 12 305 2 51 14 ¼ 362 1 - 12 25 - 12 16 406 1 ¾ 44 11 ¾ 298 ⅞ - 8 22 - 8 11 279 28.2 12.79 232 16.0
10x8 250x200 12 305 2 51 14 ¼ 362 1 - 12 25 - 12 16 406 1 ¾ 44 11 ¾ 298 ⅞ - 8 22 - 8 13 ½ 343 28.2 12.79 232 16.0
12x8 300x200 14 356 2 ¼ 57 17 432 1 - 12 25 - 12 19 483 2 51 14 ¼ 362 1 - 12 25 - 12 13 ½ 343 43.0 19.50 232 16.0
12x10 300x250 14 356 2 ¼ 57 17 432 1 - 12 25 - 12 19 483 2 51 14 ¼ 362 1 - 12 25 - 12 16 406 43.0 19.50 232 16.0
14x10 350x250 16 406 2 ½ 64 18 ¾ 476 1 ⅛ - 12 29 - 12 20 ¾ 527 2 ¼ 57 17 432 1 - 12 25 - 12 16 406 55.0 24.95 232 16.0
14x12 350x300 16 406 2 ½ 64 18 ¾ 476 1 ⅛ - 12 29 - 12 20 ¾ 527 2 ¼ 57 17 432 1 - 12 25 - 12 19 483 55.0 24.95 232 16.0
16x12 400x305 18 457 2 ½ 64 21 ¼ 540 1 ⅛ - 16 29 - 16 23 ¼ 591 2 ½ 64 18 ¾ 476 1⅛ - 12 29 - 12 19 483 89.5 40.60 232 16.0
16x14 400x350 18 457 2 ½ 64 21 ¼ 540 1 ⅛ - 16 29 - 16 23 ¼ 591 2 ½ 64 18 ¾ 476 1⅛ - 12 29 - 12 20 ¾ 527 89.5 40.60 232 16.0
View of Fitting Illustrations
Concentric Reducer - Flanged [email protected]
nov.com/fgs
12 HP 16 Epoxy Fittings
Eccentric Reducer (Bell x Bell)
-
1”-16 parts are available in Green Thread ONLY
Pipe Size in mm
2 x 1 50 x 25
2 x 1 ½ 50 x 40
3 x 1 80 x 25
3 x 1 ½ 80 x 40
3 x 2 80 x 50
4 x 1 ½ 100 x 40 7 ⅜
4 x 2 100 x 50 8¼
4 x 3 100 x 80 7
6 x 3
6 x 4
8 x 4
8 x 6
150 x 80
150 x 100
200 x 100
200 x 150
10 ⅞
9
14
15 ¼
A in
5 ½
5
6 ¼
6 ¼
6
10 x 6 250 x 150 15 ¼
10 x 8 250 x 200 16 ½
12 x 6 300 x 150 17 ⅛
12 x 8 300 x 200 18 ⅜
12 x 10 300 x 250 17 ¾
14 x 8 350 x 200 23 ½
14 x 10 350 x 250 22 ⅞
14 x 12 350 x 300 22 ¾
16 x 10 400 x 250 25 ⅛
16 x 12 400 x 300 25
16 x 14 400 x 350 28 mm
140
127
159
159
152
187
210
178
276
229
356
387
387
419
435
467
451
597
581
578
638
635
711
2
2
3
3
X (1)
GT Pipe in
1 ⅝
1 ⅝
1 ⅞
1 ⅞
1⅞
2
2 ⅞
2 ¼
3 ¼
3 ¼
3 ⅜
3 ⅜
3 ⅜
5 ⅜
5 ⅜
5 ⅜
5 1/2
5 1/2
5 1/2 mm
41
41
48
48
48
51
51
51
73
57
76
76
83
83
86
86
86
137
137
137
140
140
140
X (1)
GT Pipe in
1
1 ⅛
1
1 ⅛
1 ⅛
1 ⅛
1 ⅝
1 ⅞
1 ⅞
2
2
2 ⅞
2 ⅞
3
2 ⅞
3
3 ¼
3
3 ¼
3 ⅜
3 ¼
3 ⅜
5 3/8 mm
25
29
25
29
29
29
41
48
48
51
51
73
73
76
73
76
83
76
83
86
83
86
137
X (1)
RT Pipe in
1 ⅝
1 ⅝
1 ⅞
1 ¾
1 ⅞
1 ⅝
1 ⅝
1 ⅝
2 ⅞
2 ¼
3 ⅜
3 ⅜
3 ½
3 ½
3 ⅞
3 ⅞
3 ⅞
5 ½
5 ½
5 ½
5 1/2
5 1/2
5 1/2 mm
41
41
48
44
48
41
41
41
73
57
86
86
89
89
98
98
98
140
140
140
140
140
140
X (1)
RT Pipe in
NA
NA
NA
NA
1 ⅝
NA
1 ⅝
1 ⅞
1 ⅞
1 ⅝
1 ⅝
2 ⅞
2 ⅝
3 ⅜
2 ⅞
3 ⅜
3 ½
3 ⅜
3 ½
3 ⅞
3 ½
3 ⅞
5 3/8 mm
NA
NA
NA
NA
41
NA
41
48
48
41
41
73
67
86
73
86
89
86
89
98
89
98
137
NOTE: MULTI-STEP reducers are available through 16” sizes. Information is available on request.
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
(2) Flanges should be joined to flat-faced flanges. When joining to raised-faced flange connections, consult installation or engineering manuals. Bolt torque, gasket thickness and hardness recommendations are in manual INS1000. These comments also apply to the flanged concentric reducers on the following page.
16.4
23.0
21.9
21.8
10.5
11.1
18.0
17.0
28.0
27.7
31.1
4.3
3.4
6.7
7.3
1.8
2.0
1.7
0.6
1.0
1.1
1.1
Weight lbs
0.6
0.82
0.91
0.77
1.95
1.54
3.04
3.31
kg
0.27
0.27
0.45
0.5
0.5
4.76
5.03
8.16
7.71
7.44
232
10.43
232
9.93
9.89
232
232
232
232
232
232
12.7
232
12.56
232
14.11
232
232
232
232
232
232
232
232
435
435
435
435
Steady
Pressure Rating psig
435 bar
30
30
30
30
30
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
View of Fitting Illustrations
X
1
A
X
2
Concentric Reducer - Bell x Bell
HP 16 Epoxy Fittings 13
Eccentric Reducer (Flanged
(2)
)
-
1”-16 parts are available in Green Thread ONLY
Pipe
Size in mm
B C in mm in
D mm in
E
Bolt Hole Size -
# of Holes mm in mm
O in
2x1 50x25 5 127 ¾ 19 4 ¾ 121 ¾ - 4 19 - 4 6
G mm in
152 ¾
H mm in mm in
19 3 ⅞ 98
J
Bolt Hole Size -
# of Holes P
⅝ - 4 mm
16 - 4 in
Weight mm lbs kg
4 ¼ 108 2.6
Steady
Pressure
Rating psig bar
1.18 300 20.7
2x1½ 50x40 5 127 ¾ 19 4 ¾ 121 ¾ - 4 19 - 4 6
3x1 80x25 6 375 1 ⅜ 35 6 152 ¾ - 4
152 ¾
19 - 4 7 ½ 191 ¾
19 3 ⅞ 98 ⅝ - 4
19 4 ¾ 121 ¾ - 4
16 - 4 5
19 - 4 5
127 2.6
127 4.4
1.18 300 20.7
2.00 190 13
3x1½ 80x40 6 152 1 ⅜ 35 6
3x2 80x50 6 152 1 ⅜ 35 6
152 ¾ - 4 19 - 4 7 ½ 191 ¾ 19 4 ¾ 121 ¾ - 4 19 - 4 5
152 ¾ - 4 19 - 4 7 ½ 191 ¾ 19 4 ¾ 121 ¾ - 4 19 - 4 6
4x1½ 100x40 7 391 1 ⅜ 35 7 ½ 191 ¾ - 8 19 - 8 9
4x2 100x50 7 178 1 ⅜ 35 7 ½ 191 ¾ - 8 19 - 8 9
229 1 ⅜ 35 6
229 1 ⅜ 35 6
152 ¾ - 4
152 ¾ - 4
19 - 4 6
19 - 4 6
127 4.4
152 4.4
152 7.1
152 7.1
2.00 190 13.1
2.00 190 13.1
3.20 150 10
3.22 150 10.3
4x3 100x80 7 178 1 ⅜ 35 7 ½ 191 ¾ - 8 19 - 8 9 229 1 ⅜ 35 6 152 ¾ - 4 19 - 4 7 ½ 191 7.1
3.22 150 10.3
6x3 150x80 9 229 1 ½ 38 9 ½ 241 ⅞ - 8 22 - 8 11 279 1 ⅜ 35 7 ½ 191 ¾ - 8 19 - 8 7 ½ 191 11 4.99 150 10.3
6x4 150x100 9 229 1 ½ 38 9 ½ 241 ⅞ - 8 22 - 8 11 279 1 ⅜ 35 7 ½ 191 ¾ - 8 19 - 8 9
8x4 200x100 11 279 1 ¾ 44 11 ¾ 298 ⅞ - 8 22 - 8 13 ½ 343 1 ½ 38 9 ½ 241 ⅞ - 8 22 - 8 9
229 11 4.99 150 10.3
229 17.6 7.98 232 16
8x6 200x150 11 279 1 ¾ 44 11 ¾ 298 ⅞ - 8 22 - 8 13 ½ 343 1 ½ 38 9 ½ 241 ⅞ - 8 22 - 8 11 279 17.6 7.98 232 16
10x6 250x150 12 305 2 51 14 ¼ 362 1 - 12 25 - 12 16 406 1 ¾ 44 11 ¾ 298 ⅞ - 8 22 - 8 11 279 28.2 12.79 232 16
10x8 250x200 12 305 2 51 14 ¼ 362 1 - 12 25 - 12 16 406 1 ¾ 44 11 ¾ 298 ⅞ - 8 22 - 8 13 ½ 343 28.2 12.79 232 16
12x8 300x200 14 356 2 ¼ 57 17 432 1 - 12 25 - 12 19 483 2 51 14 ¼ 362 1 - 12 25 - 12 13 ½ 343 43.0 19.50 232 16
12x10 300x250 14 356 2 ¼ 57 17 432 1 - 12 25 - 12 19 483 2 51 14 ¼ 362 1 - 12 25 - 12 16 406 43.0 19.50 232 16
14x10 350x250 16 406 2 ½ 64 18 ¾ 476 1 ⅛ - 12 29 - 12 20 ¾ 527 2 ¼ 57 17 432 1 - 12 25 - 12 16 406 55.0 24.95 232 16
14x12 350x300 16 406 2 ½ 64 18 ¾ 476 1 ⅛ - 12 29 - 12 20 ¾ 527 2 ¼ 57 17 432 1 - 12 25 - 12 19 483 55.0 24.95 232 16
16x12 400x305 18 457 2 ½ 64 21 ¼ 540 1 ⅛ - 16 29 - 16 23 ¼ 591 2 ½ 64 18 ¾ 476 1⅛ - 12 29 - 12 19 483 89.5 40.60 232 16
16x14 406x350 18 457 2 ½ 64 21 ¼ 540 1 ⅛ - 16 29 - 16 23 ¼ 591 2 ½ 64 18 ¾ 476 1⅛ - 12 29 - 12 20 ¾ 527 89.5 40.60 232 16
View of Fitting Illustrations
C
E
A
J
G
O D
H P
Eccentric Reducer - Flanged [email protected]
nov.com/fgs
14 HP 16 Epoxy Fittings
Reducer Bushing
Pipe Size in
*
**
2 x 1
2 x 1 NPT
2 x 1¼ NPT 50 x 30
2 x 1 ½ 50 x 40
2 x 1 ½ NPT 50 x 40
3 x 2 80 x 50
4 x 3
6 x 4
8 x 6
10 x 8
12 x 10
14 x 12
16 x 14 mm
*
**
50 x 25
50 x 25
100 x 80
150 x 100
200 x 150
250 x 200
300 x 250
350 x 300
400 x 350
1 ¾
2
1 ¾
2 ¼
2 ⅝
3 ⅛
3 ¼
4
4 ½
5 ½
6
A in
1 ⅛
1 ⅜
2 ¼
1 ¾ mm
29
35
57
44
44
51
44
57
67
79
83
102
114
140
152
-
-
-
-
X (1)
GT Pipe in
1
1
1 ⅛
1 ⅝
1 ⅞
2
3
2 ⅝
3
3 ⅞
4 ½
-
-
-
mm
25
25
29
41
48
51
76
67
76
98
114
-
-
-
1 ⅝
1 ⅜
1 ½
2 ⅜
3
3 ¼
4 ⅛
4 ½
-
-
-
X (1)
RT Pipe
in
* 1x ¼ NPT, 1x ½ NPT, 1x ¾ NPT, 1 ½x ½ NPT, 1 ½x ¾ NPT
** 1 ½x1NPT, 1 ½x1(X-GT), 1 ½x1 ¼ NPT
NOTE: MULTI-STEP and ECCENTRIC reducers are available through 16” sizes. Information available on request.
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
35
38
60
76
83
105
114
-
-
-
41
-
-
-
mm
0.45
1.77
3.08
4.49
5.35
9.16
13.11
0.18
0.05
0.05
0.36
kg
0.05
0.05
0.18
0.18
1.0
3.9
6.8
0.4
0.1
0.1
0.8
9.9
11.8
20.2
28.9
0.1
0.4
0.4
Weight lbs
0.1
435
435
435
435
232
232
232
232
232
232
232
Steady
Pressure Rating psig
435 bar
30
435
435
435
30
30
30
16
16
16
16
16
16
16
30
30
30
30
View of Fitting Illustrations
Reducer Bushing
HP 16 Epoxy Fittings
Lateral (45° Lateral Belled)
10
12
14
16
4
6
8
Pipe Size in
1
1 ½
2
3 mm
25
40
50
80
100
150
200
250
300
350
400
9
12 1/2
16 1/4
19 5/8
24 3/4
32 ½
35 ¾
A in
3 ⅞
5 ¼
7 3/4
7 3/4 mm
98
133
197
197
229
318
413
498
629
826
908
4 3/8
5 3/4
7 3/8
8 3/4
11 3/4
15 ¾
17 ¾
F in
2 ½
3 ¼
4 1/4
4 1/4 mm
64
83
108
108
111
146
187
222
298
400
451
3
2 3/4
3
3 1/4
3 3/8
3 ⅞
4 ⅛
X (1)
GT Pipe in
1
1
2 1/2
2 1/2
76
69
76 mm
25
25
62
62
83
86
98
105
3 1/4
3
3 3/8
3 1/2
3 7/8
4
4 ⅛
X (1)
RT Pipe
in
-
2 5/8
2 5/8
81
74
86
mm
-
67
67
89
98
102
105
8.5
12.5
36.0
57.0
85.0
154.2
222.6
1.3
5.3
6.2
Weight lbs
0.6
kg
0.27
0.59
2.42
2.82
3.86
5.68
16.36
25.91
38.64
69.94
101.00
150
135
135
120
90
75
75
Steady
Pressure Rating psig
150 bar
10.3
150
150
150
10.3
10.3
10.3
8.3
6.2
5.2
5.2
10.3
9.3
9.3
Lateral (45° Lateral Flanged
(2)
)
6
8
10
12
14
16
2
3
4
Pipe Size in mm
B in
1 25 6
1 ½ 40 8 ½
50
80
100
8 ⅞ 225
11 ¾ 298
12 ⅞ 327
C mm in
152 ¾
216 ¾
¾
1 ⅜
1 ⅜
150
200
250
300
350
400
18
21 ¾
26 ⅝
32
36
40
457
552
676
813
1 ½
1 ¾
2
2 ¼
914 2 ½
1,016 2 ½
38
44
51
57
64
64
19
35
35
D mm in
19 3 ¼
19 3 ⅞
4 ¾
6
7 ½
9 ½ 241
11 ¾ 298
14 ¼ 362
17 432
18 ¾ 476
21 ¼ 540 mm in
83 ⅝
E
Bolt Hole
Size mm
16
98 ⅝ 16
121
152
191
¾
¾
¾
⅞
⅞
1
1
1⅛
1⅛
19
19
19
22
22
25
25
29
29
# of
Holes
4
4
4
4
8
8
8
12
12
12
16
F in
4 ½
5 ½
6 ⅜
8
8 ½
11 279
13 ¾ 349
16 ⅝ 422
20 508
22
24
559
610
O mm in
114 4 ¼
140 5
162
203
216
6
7 ½
9
152
191
229
11 279
13 ½ 343
16
19
406
483
20 ¾ 527
23 ¼ 594 mm
108
Weight lbs
2.8
Steady
Pressure
Rating kg psig
1.27
150 bar
10.3
127 4.4
2.00
150 10.3
7.8
13.4
19.2
35.0
65.3
3.54
6.08
8.71
150
150
150
15.90 135
29.60 135
112.0 50.80 120
172.0 78.00 90
209.0 94.60 75
267.0 121.0 75
10.3
10.3
10.3
9.3
9.3
8.3
6.2
5.2
5.2
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
(2) Flanges should be joined to flat-faced flanges. When joining to raised-faced flange connections, consult installation or engineering Manuals INS1000 & ENG1000. Bolt torque, gasket thickness and hardness recommendations are in Manual INS1000.
15
View of Fitting Illustrations
45° Lateral Belled 45° Lateral Flanged [email protected]
nov.com/fgs
16 HP 16 Epoxy Fittings
Cross (Belled)
8
10
12
14
16
4
6
2
3
Pipe Size in
1
1 ½
200
250
300
350
400 mm
25
40
50
80
100
150
11 ⅝
13 ⅛
14
16
17 ¼
3 ⅜
4 ⅝
5 ⅛
6 ⅛
A in
2 ¾
3 ⅜
295
333
356
406
438 mm
70
86
86
117
130
156
3 ⅛
3 ¼
3 ⅜
3 ⅞
4 ⅛
1 ⅝
1 ⅞
2
2 ¼
X (1)
GT Pipe in
1
1 ⅛
79
83
86
98
105
41
48
51
57 mm
25
29
3 ½
3 ½
3 ⅞
4
4 ⅛
1 ½
1 ¾
1 ⅝
2 ¼
-
X (1)
RT Pipe
in
89
89
98
102
105
38
44
41
57
-
mm
30.8
42.7
73.2
104.0
143.0
3.4
8.5
10.7
17.3
Weight lbs
1.4
2.0
13.97
19.37
33.2
47.27
64.86
kg
0.64
0.91
1.54
3.86
4.85
7.85
150
150
150
150
150
300
190
150
150
Steady
Pressure Rating psig
300 bar
20.7
300 20.7
20.7
13.1
10.3
10.3
10.3
10.3
10.3
10.3
10.3
Cross (Flanged
(2)
)
10
12
14
16
4
6
8
Pipe Size in
1 mm
25
1 ½
2
3
40
50
80
100
150
200
250
300
350
400
B in
3 ½
4
4 ½
5 ½
6 ½
8
9
11
12
14
15 mm
89
102
114
140
165
203
229
279
305
356
381
C in
¾
¾
¾
1 ⅜
1 ⅜
1 ½
1 ¾
2
2 ¼
2 ½
2 ½ mm
19
19
19
35
35
38
44
51
57
64
64
D in
3 ⅛
3 ⅛
4 ¾
6
7 ½
9 ½
11 ¾
14 ¼
17
18 ¾
21 ¼ mm
79
79
121
152
191
241
298
362
432
476
540
¾
⅞
⅝
¾
1
1 in
⅝
E
Bolt Hole
Size
¾
⅞
1 ⅛
1 ⅛ mm
16
16
19
19
19
22
22
25
25
29
29
# of
Holes
4
4
4
4
8
8
8
12
12
12
16
O in
4 ¼
5
6
7 ½
9
11
13 ½
16
19
20 ¾
23 ¼ mm
108
127
152
191
229
279
343
406
483
527
594
Weight lbs
3.8
5.4
8.6
15.1
22.8
34.9
61.2
kg
1.7
2.5
3.9
6.8
10.3
15.8
27.8
150
150
150
83.5
37.9
145.0
65.8
150
150
224.0
102.0
150
303.0
137.0
150
Steady
Pressure Rating psig
300 bar
20.7
300
300
190
20.7
20.7
13.1
10.3
10.3
10.3
10.3
10.3
10.3
10.3
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
(2) Flanges should be joined only to flat-faced flanges. When joining to raised-faced flange connections, consult installation or engineering Manuals INS1000 & ENG1000. Bolt torque, gasket thickness and hardness recommendations are in Manual INS1000.
View of Fitting Illustrations
Cross - Belled Cross - Flanged
HP 16 Epoxy Fittings
Saddle (Belled Side Outlet)
-
Parts are available in Green Thread HP ONLY
Pipe Size A in mm in
2 x 1
2 x 1 ½
3 x 1
3 x 1 ½
3 x 2
4 x 1
4 x 1 ½
4 x 2
4 x 3
6 x 1
6 x 1 ½
6 x 2
6 x 3
6 x 4
8 x 1 (2)
8 x 1 ½ (2)
50 x 25
50 x 40
80 x 25
80 x 40
80 x 50 4
100 x 25 4
100 x 40 4
100 x 50 4 ½
2 ⅞
2 ⅞
3 ½
3 ½
100 x 80 5 ¼
150 x 25 5
150 x 40 5
150 x 50 5 ½
150 x 80 6 ¼
150 x 100 6 ⅜
200 x 25 7 ⅛
200 x 40 7 ⅛
8 x 2
10 x 1 (2)
200 x 50 7
250 x 25 8 ⅛
10 x 1 ½ (2) 250 x 40 8 ⅛
10 x 2 250 x 50 8
10 x 3
12 x 1 (2)
250 x 80 9
300 x 25 9 ⅛
12 x 1 ½ (2) 300 x 40 9 ⅛
12 x 2 300 x 50 9
12 x 3
12 x 4
300 x 80 10
300 x 100 9 ⅜
14 x 1 (2) 350 x 25 10
14 x 1 ½ (2) 350 x 40 10
14 x 2
14 x 3
14 x 4
16 x 1 (2)
350 x 50
350 x 80
350 x 100
400 x 25
10
10 ⅞
10 ¼
11
16 x 1 ½ (2) 400 x 40 11
16 x 2 400 x 50 11
16 x 3
16 x 4
400 x 80
400 x 100
11 ⅞
11 ¼ mm
254
276
260
279
254
238
254
254
279
279
302
286
229
232
232
229
178
206
206
203
159
162
181
181
133
127
127
140
102
102
102
114
73
73
89
89
B in
12
15
17
13
14
17
12
12
13
13
15
17
14
10
10
10
9
9
9
9
9
9
6
8
6
6
6
6
6
6
6
6
6
6
4
4 mm
305
381
432
330
356
432
305
305
330
330
381
432
356
254
254
254
229
229
229
229
152
203
229
229
152
152
152
152
152
152
152
152
102
102
152
152
C
Angle
180
180
180
180
180
180
180
180
180
120
120
120
120
140
120
120
180
95
95
180
150
90
90
180
125
155
95
95
95
120
135
90
90
90
105
120 mm
41
48
51
25
48
51
25
29
29
41
48
51
48
25
29
41
41
25
29
41
48
51
25
29
48
25
29
41
41
25
29
41
25
29
25
29
X (1)
RT Pipe
-
1 ⅜
1 ¾
1 ⅝
1 ⅝
1 ¾
-
1 ⅝
-
-
1 ⅜
1 ¾
1 ⅝
-
-
1 ⅝
1 ¾
-
-
-
1 ⅝
1 ⅝
1 ¾
-
1 ⅝
-
-
1 ⅝
1 ¾
-
-
-
1 ⅝
-
-
in
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
(2) Saddle is manufactured by bonding a reducer bushing into a saddle with a 2” outlet.
X (1)
GT Pipe in
2
1
1 ⅝
1 ⅞
1 ⅞
2
1
1 ⅛
1 ⅛
1 ⅝
1 ⅞
2
1 ⅞
1
1 ⅛
1 ⅝
1 ⅝
1
1 ⅛
1 ⅝
1 ⅞
2
1
1 ⅛
1 ⅞
1
1 ⅛
1 ⅝
1 ⅝
1
1 ⅛
1 ⅝
1
1 ⅛
1
1 ⅛
-
35
44
41
41
44
-
41
-
-
35
44
41
-
-
41
44
-
-
-
41
41
44
-
41
-
-
41
44
-
-
-
41
-
-
mm
Weight
4.4
4.3
6.9
8.4
3.2
6.1
8.6
4.7
5.4
5.1
5.0
6.9
8.6
2.7
6.1
3.6
3.3
2.8
2.7
3.1
2.8
1.5
1.6
2.4
3.1
1.5
1.6
1.4
1.3
0.9
1.4
1.4
1.5
lbs
0.6
0.5
1.5
1.45
2.77
3.90
2.13
2.00
1.95
3.13
3.81
2.45
2.31
2.27
3.13
3.90
1.27
1.22
1.41
1.27
1.22
2.77
1.63
1.50
0.68
0.73
0.64
0.59
0.68
0.73
1.09
1.41
kg
0.27
0.23
0.68
0.41
0.64
0.64
0.68
Steady
Pressure Rating psig
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
150
125
232
232
200
232
232
232
232
232
232
232
435
232
300
232 bar
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
13.8
16
16
16
10.3
8.6
16
16
16
16
16
16
30
16
20.7
16
View of Fitting Illustrations
17
Saddle - Belled Side Outlet [email protected]
nov.com/fgs
18 HP 16 Epoxy Fittings
Threaded Side Outlet NPT Internal Threads
Pipe Size
4 x 1 ¼
4 x 1 ½
6 x 1
6 x 1 ¼
6 x 1 ½
8 x 1
10 x 1
12 x 1
14 x 1
16 x 1 in
2 x 1
2 x 1 ¼
2 x 1 ½
3 x 1
3 x 1 ¼
3 x 1 ½
4 x 1
A
5
7 ⅛
8 ⅛
9 ⅛
5
5
4
4
10
11
3 ½
3 ½
3 ½
4 in
2 ⅞
2 ⅞
2 ⅞ mm
50 x 25
50 x 30
50 x 40
80 x 25
80 x 30
80 x 40
100 x 25
100 x 30
100 x 40
150 x 25
150 x 30
150 x 40
200 x 25
250 x 25
300 x 25
350 x 25
400 x 25
127
181
206
232
102
102
127
127
254
279
89
89
89
102 mm
73
73
73
Green Thread HP 16 Branch Table
B
6
9
9
10
6
6
6
6
12
13
6
6
6
6
4
4 in
4
120
120
95
90
180
180
120
120
95
90
180
180
180
180 mm
180
180
180
C
Angle
229
229
254
305
330
152
152
152
152
152
152
152
152
102
102
102
152
Weight
1.5
3.1
3.1
3.6
1.5
1.4
1.5
1.4
4.7
5.4
1.1
1.0
1.0
1.6
lbs
0.6
0.6
0.5
0.68
0.64
0.68
0.64
0.68
1.41
1.41
1.63
2.13
2.45
kg
0.27
0.27
0.23
0.50
0.45
0.45
0.73
Steady
Pressure Rating
232
232
232
232
232
232
232
232
232
232
300
232
232
232 psig
435
232
232
16
16
16
16
16
16
16
16
16
16 bar
30
16
16
20.7
16
16
16
Header
Diameter in
12
14
16
4
6
8
10
2
3
1
1.5
mm
100
150
200
250
25
40
50
80
300
250
400
Branch Diameter
1 25 1.5 40 2 50 3 80 4 100 6 150 8 200 10 250 12 300 14 250 16 400
T -
RBT
S
T
S/RBT T
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
S
S
S
S
S/RBT
S
S
S
S/RBT
S/RBT
S
S/T
T
S*/RBT
S*/RBT
T
-
T
S*/RBT
T
-
-
T
T T
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
S
S
S
S
S
S
S
S
S/T
S/T
S
S
S/T
S/T
S/T
S/T
T
S/T
S/T
S/T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
-
T
T
T
-
-
-
T
-
-
S - Saddle, T - Tee, S/T - Tee or Saddle, S/RBT - Saddle or compression molded Tee with Reducer Bushing.
Notes:
1. In general, saddles are limited to branch sizes that are 1/3 of the header size or smaller.
2. Saddles are limited to outlet size of 6 inch or less.
3. Saddles are rated the same as Tees unless otherwise noted by *.
View of Fitting Illustrations
Threaded Side Outlet NPT Internal Threads
HP 16 Epoxy Fittings
End Caps
-
Parts are available in Green Thread HP ONLY
10
12
14
16
4
6
8
Pipe Size in
1
1 ½
2
3 mm
25
40
50
80
100
150
200
250
300
350
400
A in
2 ¾
2 ⅝
2 ¾
3 ¼
3 ¾
7 1/4
9 5/8
10 1/8
11 1/8
15
16 mm
70
67
70
83
95
184
245
257
282
381
406
X (1)
GT Pipe in
1
1 ⅛
1 ⅝
1 ⅞
2
2 3/4
3
3 1/4
3 3/8
5 3/8
5 1/2 mm
25
29
41
48
51
69
76
83
86
137
140
-
-
X (1)
RT Pipe in
1 ⅝
1 ¾
1 ⅝
2 7/8
3 3/8
3 1/2
3 7/8
5 1/2
5 1/2
41
74
86
mm
-
41
44
89
98
140
140
(1) Nominal make-up dimension for drawing layout work only using non-threaded spigots. Do not use for assembly dimensions.
3.0
4.4
6.2
8.6
12.6
19.5
24.0
0.6
1.4
1.9
Weight lbs
0.3
kg
0.14
0.27
0.64
0.86
1.36
2.00
2.82
3.91
5.73
8.86
10.91
232
232
232
232
232
232
232
Steady
Pressure Rating psig
435 bar
30
435
435
435
30
30
30
16
16
16
16
16
16
16
19
View of Fitting Illustrations
End Cap - 1"-4" End Cap - 6"-16 [email protected]
nov.com/fgs
20 HP 16 Epoxy Fittings
National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes.
Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein nor is any warranty expressed or implied. Always cross-reference the bulletin date with the most current version listed at the web site noted in this literature.
Fiber Glass Systems
17115 San Pedro Avenue, Ste 200
San Antonio, Texas 78232 USA
Phone: 210 477 7500
Fax: 210 477 7560
© 2017 National Oilwell Varco All Rights Reserved
CI1360ENG August 2017 [email protected]
nov.com/fgs
advertisement
Related manuals
advertisement