Jones Stephens I74138 Titan™ 1-3/8 x 1-1/2 x 1-1/4 - 1 in. x 36 ft. R10.2 Elastomeric Foam Pre-Slit Pipe Insulation Specification

Add to My manuals
448 Pages

advertisement

Jones Stephens I74138 Titan™ 1-3/8 x 1-1/2 x 1-1/4 - 1 in. x 36 ft. R10.2 Elastomeric Foam Pre-Slit Pipe Insulation Specification | Manualzz

DECORATIVE - page 1

Decorative bath and kitchen items available in over sixteen special finishes. (see inside front cover for finish swatches)

A

FAUCETS AND BATH ACCESSORIES - page 27

Contemporary and classic designed kitchen, bath, tub, and shower faucets along with replacement parts and bath accessories.

CAST IRON - page 237

Cast iron products such as closet flanges, drains, “Code Blue” drains, and cleanouts.

FAU

SPECIALTIES AND REPAIR - page 37

Basic plumbing and repair needs, including tank trip levers, tub and diverter spouts, bath waste kits, plumbing connectors, gas connectors, and more.

MISC. PLUMBING SPECIALTIES - page 89

Wide range of items from basic plumbing items such as water heater stands, access panels and compression couplings to water meter boxes and pipe insulation.

B

C

FITTINGS AND VALVES - page 131

Brass fittings, nylon fittings, push on fittings, PEX fittings, ball valves and more.

COMMERCIAL / RESIDENTIAL PLASTICS - page 171

Assembled coverall drains and cleanouts that have both plastic and metal spuds with a variety of different strainer and cover diameters and finishes. Residential plastics such as shower drains, roof drains and floor sinks.

D

E

F

TOOLS - page 273

Hand tools, plumbing tools, cutting tools, shovels, measuring tools, caulk, and chemicals.

GASKETS AND COUPLINGS - page 305

Compression gaskets and no hub couplings.

TUBULAR - page 311

Chrome plated, rough brass, PVC and ABS plastic tubular products as well as lav drains and pop-up assemblies.

PVC/DWV FITTINGS - page 333

PVC/DWV fittings including couplings, adapters, elbows, p-traps and bushings.

BLACK AND GALVANIZED MALLEABLES/PIPE NIPPLES - page 343

Black and galvanized malleable fittings, pipe nipples, readycut pipe and merchant couplings.

COPPER - page 353

Wrot/ACR fittings, forged brass/cast brass pressure fittings, wrot DWV solder fittings, cast DWV solder fittings and cast brass flanges.

TOILET SEATS - page 373

Commercial, residential, hospitality, and multi-family dwelling toilet seats.

G

H&I

CF

TS

T

PVC

DWV

BG

PRODUCT INDEX - page 385

PART NUMBER INDEX - page 405

PRODUCT

INDEX

PART #

INDEX

*Published December 2019.

A

DECORATIVE

Decorative Kitchen ...................................................................... 3-5

Decorative Bathroom ................................................................. 6-26

Decorative

A

*Published December 2019

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 1

A

Disposal Assembly

• Fits In-Sink-Erator

• Also acts as a basket strainer

• Stainless steel flange and basket

• Positive stopper

PART NO.

BOX

B03004

B03003

B03005

FINISH

B03004B Almond

B03003B Biscuit

B03408

B03401

B03005B Flat Black

— Brushed Nickel

— Brushed Stainless

B03406

B03407

B03001

B03405

B03400

B03001B

Oil Rubbed Bronze

Old World Bronze

Polar White

Polished Nickel (PVD)

Polished Stainless

Basket Strainer

• Simple to install, operate and maintain

• Stainless steel flange and basket

• Positive seal

PART NO.

FINISH

B02004

B02404

Almond

Antique Nickel

B02003

B02005

B02408

B02401

B02406

Biscuit

Black

Brushed Nickel

Brushed Stainless

B02407

B02001

B02405

B02400

Oil Rubbed Bronze

Old World Bronze

Polar White

Polished Nickel (PVD)

Polished Stainless

Replacement Basket Strainer

Decorative Kitchen

Polished Brass Basket Strainer

A

• Metal construction

• Simple to install, operate, and maintain

• Positive seal

PART NO. FINISH

B02008 Polished Brass

CTN/MSTR

1/50

CTN/MSTR

5/20

5/20

5/20

5/20

5/20

5/20

5/20

5/20

5/20

5/20

Disposal Assembly and Stopper

• Fits In-Sink-Erator

• Metal construction

• Matches well with S14 Duo Strainer Series

PART NO. FINISH

B03050 Polished Chrome

B0350BN Brushed Nickel

B0350RB Oil Rubbed Bronze

B0350WB Old World Bronze

F05001 Polished Brass flange only

S45001 Polished Brass stopper only

CTN/MSTR

5/20

5/20

5/20

5/20

5/20

5/20

CTN/MSTR

5/20

5/20

5/20

5/20

5/20

5/20

5/20

5/20

5/20

5/20

5/20

Duo Strainer

• Cast brass

PART NO. FINISH

S14007 Chrome Plated

S1407BN Brushed Nickel (PVD)

S1407RB Oil Rubbed Bronze

S1407WB Old World Bronze

CTN/MSTR

1/25

1/25

1/25

1/25

• Simple to operate and maintain

• Positive seal Junior Duo Basket Strainer

PART NO.

FINISH

B02304 Almond

B02303

B02305

Biscuit

Black

B0240BN Brushed Nickel

B0240BS Brushed Stainless

B0240RB Oil Rubbed Bronze

B0240WB Old World Bronze

B02301 Polar White

B0240PN Polished Nickel

B0240PS Polished Stainless

FITS PART NO.

B02004

B02003

B02005

B02408

B02401

B02406

B02407

B02001

B02405

B02400

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

CTN/MSTR

10/40

10/40

10/40

10/40

10/40

10/40

10/40

10/40

10/40

10/40

• Stainless steel body and basket with die cast locknut;

1-1/2” threads

• Complete with washers

• Fits 1-3/4” bar sink

PART NO.

FINISH

B02050 Chrome Plated

B0250BN Brushed Nickel

B0250RB Oil Rubbed Bronze

B0250WB Old World Bronze

B02100 Polished Brass

CTN/MSTR

1/100

10/80

10/80

10/80

10/80

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 3

Decorative Kitchen

A

Deep Junior Duo Basket Strainer

• For 2” and 2-1/2” deep outlets and bar sinks

B02102 B02103

PART NO. FINISH

B02102 Chrome Plated

B02101 Polished Brass

B02103 Chrome Plated (replacement strainer only)

CTN/MSTR

1/100

1/1

1/250

Bar Tap Faucet

• 6-1/2” high

• Can be used with reverse osmosis

• All brass construction

• 1/2” connection

• Epoxy coated

• 1/4” inlet; 1-3/4” escutcheon

• Lead Free

Hose and Spray

PART NO.

FINISH

B45010 Chrome

B70009

B70003

B70008

Biscuit

Black

Brushed Nickel

B70007

B70004

B70001

B70006

Oil Rubbed Bronze

Old World Bronze

Polar White

Polished Brass

• 1/4” universal coupling adapter

• Hose is white

Lotion and Soap Dispenser with Brass Pump

PART NO.

FINISH

K52011

K52013

Biscuit

Black

K52014

K52016

K52017

K52010

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polar White

CTN/MSTR

12/24

12/24

12/24

12/24

12/24

1/100

• 2” spout

• All brass pump

• 7 ounce poly bottle

Bar Tap Faucet with Rotating Spout

PART NO.

FINISH

S08020

S10022

Chrome

Biscuit

S10023

S10025

S10024

S10021

S10020

Black

Brushed Nickel (PVD)

Oil Rubbed Bronze

Polar White

Polished Brass

• 9-1/2” high

• Can be used with reverse osmosis

• 1/4” to 3/8” O.D. adapter

• Handle can be installed side or front mount

• Spout rotates

• 5” reach

PART NO.

FINISH

B70030 Chrome Plated

B70031

B70032

Brushed Nickel

Oil Rubbed Bronze

B70033

B70045

Old World Bronze

Threaded shank extension kit

CTN/MSTR

1/40

1/40

1/40

1/40

1/200

Faucet Hole Cover

• Wing nut included

• 1-3/4” diameter top

PART NO. FINISH

B1020AL Almond

B1020AB Antique Brass

B1020AN Antique Nickel

B1020BI Biscuit

B1020BL Black

B1020BN Brushed Nickel (PVD)

B1020RB Oil Rubbed Bronze

B1020WB Old World Bronze

B1020PW Polar White

B1020PN Polished Nickel

B1020PS Polished Stainless (PVD)

CTN/MSTR

1/36

6/36

6/36

6/36

6/36

6/36

6/36

6/36

CTN/MSTR

1/50

1/1

1/1

1/1

1/1

1/1

1/1

MATERIAL CTN/MSTR

Stainless Steel 12/250

Brass

Brass

12/250

12/144

Stainless Steel 12/250

Stainless Steel 12/144

Brass

Brass

12/144

12/144

Brass 12/144

Stainless Steel 12/250

Brass 12/250

Brass 12/250

4 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

A

A

Celcon Faucet Hole Cover

• Molded Celcon- will not crack, chip or peel

• 1-3/4” diameter top

PART NO.

FINISH

C06011 Chrome

C06007

C06006

C06008

C06014

C06016

Almond

Biscuit

Black

Brushed Nickel

C06013

C06004

Oil Rubbed Bronze

Old World Bronze

Polar White

C06018 Polished Nickel (PVD)

Air Gap Cover

CTN/MSTR

12/96

12/96

12/96

12/96

12/96

12/96

12/96

12/96

12/96

PART NO.

FINISH

A10015 Chrome

A10004

A10018

A10017

Biscuit

Brushed Nickel

Oil Rubbed Bronze

A10019

A10002

Old World Bronze

Polar White

Decorative Kitchen

A

• Replaces chrome cover on most air gaps

CTN/MSTR

1/1

1/1

6/18

6/72

6/72

1/1

ABS Faucet Hole Cover

• Screw down

• Fit all

• Made of ABS Plastic

• 1-3/4” diameter top; 3” length

PART NO.

FINISH

C06002 Almond

C06001 Polar White

Brass Faucet Hole Cover

• Heavy duty brass construction

• 1-3/4” diameter top

CTN/MSTR

1/1

1/1

PART NO.

FINISH

C06021

C06024

C06020

Brushed Stainless

Polished Nickel

Polished Stainless

Air Gap

CTN/MSTR

12/144

12/144

12/144

• Prevents sewage backflow by breaking siphoning action in drain line

• White polypro body with chrome plated ABS top

• UPC listed

PART NO.

FINISH

A10001

A10011

A10010

Chrome Plated

Polar White

Polished Brass

CTN/MSTR

36/72

1/50

1/50

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 5

Decorative Bathroom

A

Lav Pop-Up Drain with Overflow

• For vessel sinks 1-1/2” drain hole

• 18 gauge

• With 4” drain body and 8” brass tailpiece

• Decorative finish covers all

metal parts including tailpiece and lock nut

• Tailpiece opening – 1-1/4” OD

PART NO.

FINISH

P35033 Chrome Plated

P3503BN Brushed Nickel

P3503RB Oil Rubbed Bronze

P3503WB Old World Bronze

CTN/MSTR

3/12

3/12

3/12

3/12

Lav Pop-Up Drain without Overflow

• For vessel sinks 1-1/2” drain hole

• 18 gauge

• With 4” drain body and 8” brass tailpiece

• Decorative finish covers all

metal parts including tailpiece and lock nut

• Tailpiece opening – 1-1/4” OD

PART NO.

FINISH

P35044 Chrome Plated

P3504BN Brushed Nickel

P3504RB Oil Rubbed Bronze

P3504WB Old World Bronze

CTN/MSTR

3/12

3/12

3/12

3/12

Lav Grid Drain without Overflow

• For vessel sinks 1-1/2” drain hole

• 18 gauge

• With 4” drain body and 8” brass tailpiece

• Decorative finish covers all

metal parts including tailpiece and lock nut

• Tailpiece opening – 1-1/4” OD

PART NO.

FINISH

D70205 Chrome Plated

D7020BN Brushed Nickel

D7020RB Oil Rubbed Bronze

D7020WB Old World Bronze

CTN/MSTR

3/12

3/12

3/12

3/12

Lav Lift and Turn Drain without Overflow

• For vessel sinks

• With 3” drain body and 4-3/4” brass tailpiece

• Tailpiece opening- 1-1/4” OD

PART NO. FINISH

P35003 Chrome Plated

P3500BN Brushed Nickel (PVD)

P3500RB Oil Rubbed Bronze

P3500WB Old World Bronze

P3500PB Polished Brass

Lav Grid Drain without Overflow

PART NO. FINISH

D70105 Chrome Plated

D7010BN Brushed Nickel

D7010RB Oil Rubbed Bronze

D7010WB Old World Bronze

D7010PB Polished Brass

Brass Tubular P-Trap

• 17 gauge

• Brass slip joint nut and rubber washers

CTN/MSTR

1/50

5/30

5/30

5/30

5/30

• For vessel sinks

• With 2-1/4” drain body and 6” (5-7/8”) brass tailpiece

• Tailpiece opening- 1-1/4” OD

CTN/MSTR

1/50

1/25

1/25

1/25

1/25

Lav Grid Drain with Overflow

• For vessel sinks 1-1/2” drain hole

• 18 gauge

• With 4” drain body and 8” brass tailpiece

• Decorative finish covers all

metal parts including tailpiece and lock nut

• Tailpiece opening – 1-1/4” OD

PART NO.

FINISH

D70210 Chrome Plated

D7021BN Brushed Nickel

D7021RB Oil Rubbed Bronze

D7021WB Old World Bronze

CTN/MSTR

3/12

3/12

3/12

3/12

Lav Pop-Up Assembly with Overflow

PART NO.

FINISH

P3892BN Brushed Nickel

P3892RB Oil Rubbed Bronze

P3892WB Old World Bronze

P36125

P36150

Polished Brass

Polished Brass

P3892PB Polished Brass (PVD)

OD

1-1/4”

1-1/4”

1-1/4”

1-1/4”

1-1/2”

1-1/4”

CTN/MSTR

1/30

1/30

1/30

1/30

1/30

1/30

Brass Tubular P-Trap with Box Escutcheon

• 17 gauge

• Brass slip joint nut and rubber washers

PART NO.

FINISH

P3450CP Chrome Plated

P3450BN Brushed Nickel

P3450RB Oil Rubbed Bronze

OD

1-1/4”

1-1/4”

1-1/4”

CTN/MSTR

1/1

1/1

1/1

6

• All metal construction

• Tool free locknut and ballrod nut

• 1-1/4” tubular

• 17 gauge

PART NO.

FINISH

P35001 Chrome Plated

P35002 Polished Brass (PVD)

Replacement Parts

PART NO.

DESCRIPTION

P35920

P35921

P35922

Plunger

Flange

Lift Rod

CTN/MSTR

1/25

1/10

CTN/MSTR

1/25

1/25

1/25

Slip Joint Extension Tube

• 17 gauge

• Brass slip joint nut and rubber washers

PART NO.

FINISH

P3819BN Brushed Nickel

P3819RB Oil Rubbed Bronze

SIZE

1-1/4” x 8”

1-1/4” x 8”

CTN/MSTR

1/100

1/100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

A

A

Decorative Bathroom

Offset Bath Supplies

• Chrome plated

• 1/2” supply tubes

• All hardware needed for connection included

PART NO.

DESCRIPTION

B49020

B49021

B49022

Single offset (pair)

Double offset (pair)

Replacement nuts, washers and escutcheons

CTN/MSTR

1/6

1/6

1/6

Polished Brass Shower Rod Flange with

Set Screws

• Includes: two flanges, two set screws and four wood screws

PART NO.

FINISH

S03152 Polished Brass

Shower Diverter Valve

CTN/MSTR

1/1

• Installs between arm and shower head

• Allows usage of hand-held shower or shower head

• Not a positive shut off

PART NO.

FINISH

S01070

S01071

Chrome Plated

Brushed Nickel

S01072

S01073

Oil Rubbed Bronze

Old World Bronze

S-Shaped Shower Arm

• 18” length

• Adds 12” to height

• 1/2” female threads

• Fixed escutcheon

PART NO.

FINISH

S01055 Chrome Plated

S0155BN Brushed Nickel

S0155RB Oil Rubbed Bronze

S0155WB Old World Bronze

S01155 Polished Brass (PVD)

S-Shaped Shower Arm

• 8” or 10” length

• 1/2” male threads

CTN/MSTR

1/100

1/100

1/100

1/100

SIZE CTN/MSTR

1/2” x 18” 1/10

1/2” x 18” 1/10

1/2” x 18”

1/2” x 18”

1/2” x 18”

1/10

1/10

1/10

Ceiling Mount Shower Arm

• 1/2” female threads

• Fixed escutcheon

1/2” x 6”

PART NO.

FINISH

S01051 Chrome Plated

S0151BN Brushed Nickel

S0151RB Oil Rubbed Bronze

S0151WB Old World Bronze

S01151 Polished Brass (PVD)

1/2” x 12”

PART NO.

FINISH

S01052 Chrome Plated

S0152BN Brushed Nickel

S0152RB Oil Rubbed Bronze

S0152WB Old World Bronze

S01152 Polished Brass (PVD)

1/2” x 18”

PART NO.

FINISH

S01053 Chrome Plated

S0153BN Brushed Nickel

S0153RB Oil Rubbed Bronze

S0153WB Old World Bronze

S01153 Polished Brass (PVD)

90° Shower Arm with Flange

SIZE CTN/MSTR

1/2” x 6” 1/10

1/2” x 6” 1/10

1/2” x 6”

1/2” x 6”

1/2” x 6”

1/10

1/10

1/10

SIZE CTN/MSTR

1/2” x 12” 1/10

1/2” x 12”

1/2” x 12”

1/2” x 12”

1/2” x 12”

1/10

1/10

1/10

1/10

SIZE CTN/MSTR

1/2” x 18” 1/10

1/2” x 18”

1/2” x 18”

1/10

1/10

1/2” x 18”

1/2” x 18”

1/10

1/10

• 18” length

• 1/2” female threads

• Fixed escutcheon

PART NO.

FINISH

S01056 Chrome Plated

S0156BN Brushed Nickel

S0156RB Oil Rubbed Bronze

S0156WB Old World Bronze

S01156 Polished Brass

SIZE CTN/MSTR

1/2” x 18” 1/20

1/2” x 18” 1/20

1/2” x 18”

1/2” x 18”

1/2” x 18”

1/20

1/20

1/20

Raised Bend Shower Arm

PART NO.

FINISH

S01057 Chrome Plated

S0157BN Brushed Nickel

S0157RB Oil Rubbed Bronze

S0157WB Old World Bronze

S01157 Polished Brass (PVD)

• 18” length

• 1/2” female threads

• Fixed escutcheon

SIZE

1/2” x 18”

1/2” x 18”

1/2” x 18”

1/2” x 18”

1/2” x 18”

CTN/MSTR

1/20

1/20

1/20

1/20

1/20

PART NO.

FINISH

S01035

S01038

Chrome Plated

Chrome Plated

SIZE

8”

10”

CTN/MSTR

1/80

1/50

A

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 7

Decorative Bathroom

A

Double Offset Shower Arm

• 18” length

• 1/2” female threads

• Adds 12” to height

• Fixed escutcheon

Polished Brass Shower Arm Flange

• Die cast with a set screw

• Poly bagged

PART NO. DESCRIPTION

S03040 1/2” with set screw

CTN/MSTR

20/400

PART NO.

FINISH

S01058 Chrome Plated

S0158BN Brushed Nickel

S0158RB Oil Rubbed Bronze

S0158WB Old World Bronze

S01158 Polished Brass (PVD)

SIZE

1/2” x 18”

1/2” x 18”

1/2” x 18”

1/2” x 18”

1/2” x 18”

CTN/MSTR

1/10

1/10

1/10

1/10

1/10

Cover Plates

• Mirrored acrylic

• Conceals damaged/cracked tiles

• Fits all standard bath/shower fittings

• No tools required- use silicone caulk

• DO NOT use abrasive cleaners

ASSEMBLED IN USA

Shower Arm

• Fits E02 series escutcheons

6”

PART NO.

FINISH

S01030 Chrome Plated

S0130BN Brushed Nickel

S0130RB Oil Rubbed Bronze

S0130WB Old World Bronze

8”

PART NO.

FINISH

S01032 Chrome Plated

S0132BN Brushed Nickel

S0132RB Oil Rubbed Bronze

S0132WB Old World Bronze

SIZE

6”

6”

6”

6”

SIZE

8”

8”

8”

8”

CTN/MSTR

1/200

1/200

1/200

1/200

CTN/MSTR

1/100

1/100

1/100

1/100

PART NO. DESCRIPTION

T73001 Tub spout model

T73002

T73003

T73004

One handle model

Two handle model

Three handle model

SIZE

3-1/2” diameter

8” x 14”

6” x 14”

6” x 14”

Stainless Steel Repair Cover Plates

• 1, 2 or 3 hole design to fit multitude of valves

• Polished stainless steel finish

• Easily attaches with silicone caulk; 1-hole has brackets and screw

• 7-1/4” x 13” long

PART NO.

T73815

T73816

T73817

T73818

# OF HOLES

1

2

3

1

DIAMETER

5-1/8”

1-3/8”

1-3/8”

3-3/4”

CTN/MSTR

1/300

1/100

1/40

1/36

CTN/MSTR

1/40

1/40

1/40

1/40

Polished Brass Shower Arm

• Fits E81050 escutcheon

Chrome Plated Tub Spouts

PART NO.

FINISH

S03030 Polished Brass

S03032

S01036

S01037

Polished Brass

Polished Brass

Polished Brass

SIZE

1/2” x 6”

CTN/MSTR

20/200

1/2”x 8” 20/200

1/2” x 8” s-shaped 10/80

1/2” x 10” s-shaped 10/60

PART NO.

D01020

D01021

• Chrome plated Zamak

• CTS unit comes with hex key

DESCRIPTION

1/2” FIP

1/2” CTS

CONNECTION CTN/MSTR

Nose

SlideBase

1/50

1/50

8

Contoured Shower Curtain Rod

• Easy installation

• Anchors included

• Brings shower curtain in front of wall to prevent gaps and leaks

• Perfect for 60” oval and standard tubs

• Sweeping curve creates more space in center of tub

• Multiple applications - residential, hotel, motel, assisted living, etc.

PART NO.

D01016

• Chrome plated brass

• 8-1/2” One piece diverter spout

DESCRIPTION

3/4” x 1/2” FIP

CONNECTION CTN/MSTR

Base 1/20

PART NO. FINISH

S02197

S02198

Chrome Plated

Brushed Nickel

CTN/MSTR

1/1

1/2

9” Chrome Plated Tub and Diverter Spout

PART NO.

D01017

D01018

DESCRIPTION

1/2” FIP

1/2” FIP

• Chrome plated brass

• One piece design

• 1/2” nose connection

• Solid brass construction

CONNECTION CTN/MSTR

Nose

Nose

1/12

1/12

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

A

A

Polished Brass Tub Spouts

PART NO.

D03016

• 8-1/2”

• PVD durable finish

• All brass

• Boxed

DESCRIPTION

3/4” x 1/2”x 8-1/2”

CONNECTION CTN/MSTR

Base 1/20

• Brass plated zamak

• Boxed

PART NO.

D03020

DESCRIPTION

1/2” FIP

CONNECTION CTN/MSTR

Nose 1/50

Polished Brass Diverter Spouts

PART NO.

D03001

• Brass plated zamak

• Boxed

DESCRIPTION

1/2” FIP

CONNECTION CTN/MSTR

Nose 1/50

PART NO.

D03002

• Brass plated zamak

• Boxed

DESCRIPTION

3/4” x 1/2” FIP

CONNECTION CTN/MSTR

Base 1/50

PART NO.

D03004

• Brass plated zamak

• Boxed

DESCRIPTION

1/2” CTS (5/8” OD) Slip-on with hex key

CONNECTION CTN/MSTR

Base 1/50

PART NO.

D03010

• Brass plated zamak

• Boxed

DESCRIPTION

3/4” x 1/2” FIP with 1/2” top connection for hand-held shower

• Brass plated zamak

• Boxed

CONNECTION CTN/MSTR

Base 1/50

Chrome Plated Diverter Spouts and Extensions

PART NO.

D01015

Extension Only

• Chrome plated brass

• 8-1/2” One piece diverter spout

• All brass

• Boxed

DESCRIPTION

3/4” x 1/2” FIP

CONNECTION CTN/MSTR

Base 1/20

• Chrome plated brass

Decorative Bathroom

PART NO.

D01030

D01031

DESCRIPTION

3” extension only

4-3/4” extension only

• Chrome plated Zamak

• Diverter spout for hand held shower

CTN/MSTR

1/100

1/80

PART NO.

D01010

D01011

DESCRIPTION

3/4” x 1/2” FIP top connection

3/4” x 1/2” MIP lower connection

CONNECTION CTN/MSTR

Base 1/10

Base 1/50

7” Chrome Plated Diverter Spout

PART NO.

D01024

D01025

• Chrome plated Zamak

• Longer length for todays larger tubs

• CTS unit comes with hex key

DESCRIPTION

1/2” FIP

1/2” CTS

CONNECTION

Nose

Slide

CTN/MSTR

1/50

1/25

Chrome Plated Diverter Spout with

Polished Brass Knob

• Brass plated Zamak

• Boxed

PART NO.

D03011

PART NO.

D03015

DESCRIPTION

3/4” x 1/2” FIP with 1/2” bottom connection for hand-held shower

• 8-1/2”

• PVD durable finish

• All brass

• Boxed

DESCRIPTION

3/4” x 1/2” x 8-1/2” long

CONNECTION CTN/MSTR

Base 1/50

CONNECTION CTN/MSTR

Base 1/20

PART NO.

D01032

DESCRIPTION

CP slip on diverter with

PB knob

CONNECTION CTN/MSTR

7” Chrome Plated Tub Spout

Base

• CTS unit comes with hex key

• Longer length for today’s larger tubs

• Chrome plated Zamak

1/50

PART NO.

D01026

D01027

DESCRIPTION

1/2” FIP

1/2” CTS

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CONNECTION CTN/MSTR

Nose

Slide

1/50

1/25

9

A

Decorative Bathroom

A

Decorative Diverter Spout

• Zamak

• 1/2” CTS Slide connection

Toe Touch Conversion Kit

• 1- hole faceplate

• 1-3/8” drain with bushing, screw, aluminum adapter bar, and faceplate

• Clamshell packaging

PART NO.

FINISH

D0104BN Brushed Nickel

D0104RB Oil Rubbed Bronze

D0104WB Old World Bronze

CONNECTION CTN/MSTR

1/2” CTS Nose

1/2” CTS Slide

1/2” CTS Slide

1/50

1/50

1/50

Ring for Tub Spouts and Diverters

PART NO.

FINISH

B51010 Chrome Plated

B5161AP Antique Pewter

B5161BB Brushed Bronze

B5161BN Brushed Nickel

B5161RB Oil Rubbed Bronze

B5161WB Old World Bronze

B5161PS Polished Stainless

# OF HOLES CTN/MSTR

1

1

1

1/25

1/25

1/25

1

1

1

1

1/25

1/25

1/25

1/25

• Adds decorative touch to any tub spout or diverter

• Fits between the wall and the tub spout or diverter

• 3-5/16” OD – 2-3/8” ID Lift and Turn Conversion Kit

PART NO.

FINISH

D01050 Chrome Plated

D01050BN Brushed Nickel

D01050RB Oil Rubbed Bronze

D01050WB Old World Bronze

Polished Brass Lift and Turn Bath Waste

Conversion Kit

PART NO.

B51003

B51020

SIZE

1/2” and 1-3/8”

1/2” and 1-3/8”

CTN/MSTR

1/200

1/200

1/200

1/200

• Converts regular bath waste to polished brass

• Fits 1-3/8” or 1-1/2” waste elbows

• Includes drain, bushing, faceplate, and screws

• Blister card packaging

# OF HOLES CTN/MSTR

2

1

1/12

1/12

• 2-hole faceplate

• 1-3/8” drain with bushing, 2 screws and faceplate

PART NO.

FINISH

B51005 Chrome Plated

B5155AL Almond

B5155AB Antique Brass

B5155AN Antique Nickel

B5155AP Antique Pewter

B5155BI Biscuit

B5155BL Black

B5155BB Brushed Bronze

B5155BN Brushed Nickel

B5155BS Brushed Stainless

B5155RB Oil Rubbed Bronze

B5155WB Old World Bronze

B5155PW Polar White

B5155PS Polished Stainless

B51004 Satin Nickel

B5155BNB Brushed Nickel (boxed)

B5155WBB Old World Bronze (boxed)

2

2

2

2

2

2

2

2

2

2

2

# OF HOLES CTN/MSTR

2 1/25

2

2

1/25

1/25

2

2

2

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

10

Lift and Turn Conversion Kit

• 1- hole faceplate

• 1-3/8” drain with bushing

• Includes drain, bushing, faceplate, aluminum adapter bar and screws

• Blister card packaging

PART NO.

FINISH

B51019 Chrome Plated

B5160AP Antique Pewter

B5160BB Brushed Bronze

B5160BN Brushed Nickel

B5160BS Brushed Stainless

B5160RB Oil Rubbed Bronze

B5160WB Old World Bronze

B5160PN Polished Nickel

B5160PS Polished Stainless

# OF HOLES CTN/MSTR

1 1/36

1

1

1/36

1/36

1

1

1

1

1

1

1/36

1/36

1/36

1/36

1/36

1/36

Toe Touch Conversion Kit

• 2-hole faceplate

• Fits 1-3/8” or 1-1/2” waste elbows

• Includes drain, bushing, faceplate and 2 screws

PART NO.

FINISH

B51007 Chrome Plated

B5156AP Antique Pewter

B5156BB Brushed Bronze

B5156BN Brushed Nickel

B5156RB Oil Rubbed Bronze

B5156WB Old World Bronze

B5156PS Polished Stainless

# OF HOLES CTN/MSTR

2

2

1/25

1/25

2

2

2

2

2

1/25

1/25

1/25

1/25

1/25

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

A

A

Trip Lever Conversion Kit

• 2-hole faceplate

• Fits 1-3/8” or 1-1/2” waste elbows

• Includes drain, bushing, faceplate and 2 screws

PART NO. FINISH

B51015 Chrome Plated

B5112AP Antique Pewter

B5112BI Biscuit

B5112BB Brushed Bronze

B5112BN Brushed Nickel

B5112BS Brushed Stainless

B5112RB Oil Rubbed Bronze

B5112WB Old World Bronze

B5112PW Polar White

Flip-It Conversion Kit

# OF HOLES CTN/MSTR

2

2

2

1/25

1/25

1/25

2

2

2

2

2

2

1/25

1/25

1/25

1/25

1/25

1/25

Decorative Bathroom

Trip Lever Faceplate and Handle

A

• 2-hole faceplate

• Less screws

PART NO.

FINISH

T05002 Chrome Plated

P3566AL Almond

P3566AB Antique Brass

P3566AN Antique Nickel

P3566BI Biscuit

P3566BL Black

P3566BN Brushed Nickel

P3566BS Brushed Stainless

P3566RB Oil Rubbed Bronze

P3566WB Old World Bronze

P3566PW Polar White

P3566PN Polished Nickel

P3566PS Polished Stainless

# OF HOLES CTN/MSTR

2 1/200

2

2

2

1/100

1/100

1/100

2

2

2

2

2

2

2

2

2

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

• No tools needed for installation

• Open or close with a flip of the toe

• Fits most popular tub drains (assorted o-ring included)

• One piece construction Delrin and ABS

Trip Lever with Spring

PART NO. FINISH

P35170 Chrome Plated

P35172

P35171

Brushed Nickel

Polished Brass

# OF HOLES CTN/MSTR

1 1/5

1

1

1/5

1/5

• Includes screws

Trip Lever Trim Only

PART NO. FINISH

T05003

T08003

T08004

Chrome Plated

Polished Brass

Polished Brass (PVD)

# OF HOLES CTN/MSTR

2

2

2

25/200

25/200

1/100

PART NO. FINISH

B51014 Chrome Plated

B5114AP Antique Pewter

B5114BB Brushed Bronze

B5114BN Brushed Nickel

B5114RB Oil Rubbed Bronze

B5114WB Old World Bronze

B5114PB Polished Brass

B5114PN Polished Nickel

B5114PS Polished Stainless

• 2-hole faceplate

• Includes springs, faceplate, 2 screws and strainer

# OF HOLES CTN/MSTR

2

2

1/25

1/25

2

2

2

2

2

2

2

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1-Hole Overflow Faceplates

• Includes screws

PART NO. FINISH

T05012 Chrome Plated

T0812BN Brushed Nickel

T0812RB Oil Rubbed Bronze

T0812WB Old World Bronze

T08012

T08013

T08113

P35616

Polished Brass (PVD)

Polished Brass

Polished Brass (PVD)

Satin Nickel

# OF HOLES CTN/MSTR

1

1

25/200

1/100

1

2

1

1

2

2

1/100

1/100

1/200

1/200

1/200

1/50

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 11

Decorative Bathroom

A

2-Hole Overflow Faceplate

• Includes screws

PART NO.

FINISH

T05013 Chrome Plated

T0813BN Brushed Nickel

T0813RB Oil Rubbed Bronze

T0813WB Old World Bronze

T0813PW Polar White

Overflow Faceplate Only

# OF HOLES CTN/MSTR

2

2

1/200

1/1

2

2

2

1/1

1/1

1/1

Bath Drains

• 2-11/16” OD

• P35061 and P35060 have a zinc body

PART NO. FINISH

P35061

P35051

Chrome Plated

DESCRIPTION

1-3/8” Lift and Turn

Polished Brass (PVD) 1-3/8” Lift and Turn

P35060

P35050

P35065

Chrome Plated

White

1-1/2” Lift and Turn

Polished Brass (PVD) 1-1/2” Lift and Turn

1-1/2” Lift and Turn

CTN/MSTR

1/100

1/100

1/100

1/100

1/100

• 2-hole faceplate

• Less screws

PART NO.

FINISH

T05011 Chrome Plated

P3565AL Almond

P3565AB Antique Brass

P3565AN Antique Nickel

P3565BI Biscuit

P3565BL Black

P3565BN Brushed Nickel

P3565BS Brushed Stainless

P3565RB Oil Rubbed Bronze

P3565WB Old World Bronze

P3565PW Polar White

P3565PN Polished Nickel

P3565PS Polished Stainless

# OF HOLES CTN/MSTR

2

2

1/200

1/50

2

2

2

1/50

1/50

1/50

2

2

2

2

2

2

2

2

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

Waste and Overflow Faceplate Screws

• For P3566 and P3565 series faceplates

PART NO. FINISH

P35063 Chrome Plated

DESCRIPTION

1-3/8” Toe Touch

P35062

P35052

Chrome Plated

Polished Brass

1-1/2” Toe Touch

1-1/2” Toe Touch

• P35056 is replacement cartridge for P35063 and P35062

• P35055 is replacement cartridge for P35052

CTN/MSTR

1/100

1/100

1/100

PART NO. FINISH DESCRIPTION

P35056 Chrome Plated 5/16” Toe Touch Cartridge

P35055 Polished Brass 5/16” Toe Touch Cartridge

• 1-3/8” are fine theads

• 1-1/2” are coarse threads

PART NO. DESCRIPTION

T05024 1-3/8” female- 1-1/2” male bushing

CTN/MSTR

1/300

1/300

CTN/MSTR

50/300

Polished Brass/Satin Nickel Bath Drains

PART NO.

FINISH

T05021 Chrome Plated

T0521AL Almond

T0521AB Antique Brass

T0521AN Antique Nickel

T0521BI Biscuit

T0521BL Black

T0521BN Brushed Nickel

T0521BS Brushed Stainless

T0521RB Oil Rubbed Bronze

T0521WB Old World Bronze

T0521PW Polar White

T0521PN Polished Nickel

T0521PS Polished Stainless

T08021 Polished Brass

P35615 Satin Nickel

SIZE CTN/MSTR

1/4” x 2” 100/1000

1/4” x 2”

1/4” x 2”

1/300

1/300

1/4” x 2”

1/4” x 2”

1/4” x 2”

1/300

1/300

1/300

1/4” x 2”

1/4” x 2”

1/4” x 2”

1/4” x 2”

1/4” x 2”

1/4” x 2”

1/4” x 2”

1/4” x 2”

1/4” x 2”

1/300

1/300

1/300

1/300

1/300

1/300

1/300

50/2000

1/25

• PVD durable finish

PART NO. FINISH DESCRIPTION

P35072 Polished Brass (PVD) 1-1/2” Lift and Turn

P35073 Polished Brass (PVD) 1-1/2” Toe Touch

P35068 Polished Brass (PVD) 1-1/2” Friction Lift

CTN/MSTR

1/100

1/50

1/50

P35058 Polished Brass (PVD) 3/8” Toe Touch Replacement 1/100

P35610 Satin Nickel (PVD) 1-1/2” Lift and Turn 1/50

P35611 Satin Nickel (PVD) 1-1/2” Friction Lift

P35612 Satin Nickel (PVD) 1-1/2” Toe Touch

1/50

1/50

P35613 Satin Nickel (PVD) 1-1/2” Trip Lever

P35614 Satin Nickel (PVD) 1-1/2” Cable Drive

1/50

1/50

12 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

A

A

Toe Touch Bath Drain

• 1-1/2” drain

• Coarse thread

PART NO.

FINISH

P35062 Chrome Plated

P3562AL Almond

P3562AB Antique Brass

P3562AN Antique Nickel

P3562BI Biscuit

P3562BL Black

P3562BN Brushed Nickel

P3562BS Brushed Stainless

P3562RB Oil Rubbed Bronze

P3562WB Old World Bronze

P3562PW Polar White

P3562PN Polished Nickel

P3562PS Polished Stainless

CTN/MSTR

1/50

1/50

1/50

1/50

1/50

1/50

1/100

1/50

1/50

1/50

1/50

1/50

1/50

Lift and Turn Bath Drain

• Body and stopper

• 1-1/2” drain

• Coarse thread

PART NO.

FINISH

P35066 Chrome Plated

P3560AL Almond

P3560AB Antique Brass

P3560AN Antique Nickel

P3560BI Biscuit

P3560BL Black

P3560BN Brushed Nickel

P3560BS Brushed Stainless

P3560RB Oil Rubbed Bronze

P3560WB Old World Bronze

P3560PW Polar White

P35050 Polished Brass (PVD)

P3560PN Polished Nickel

P3560PS Polished Stainless

P35610 Satin Nickel

Decorative Bathroom

A

CTN/MSTR

1/50

1/50

1/50

1/50

1/50

1/100

1/50

1/50

1/50

1/100

1/50

1/50

1/50

1/50

1/50

Trip Lever Body, Grid and Screw

• 1-1/2” drain

• Coarse thread

PART NO.

FINISH

P35064 Chrome Plated

P3563AL Almond

P3563AB Antique Brass

P3563AN Antique Nickel

P3563BI Biscuit

P3563BL Black

P3563BN Brushed Nickel

P3563BS Brushed Stainless

P3563RB Oil Rubbed Bronze

P3563WB Old World Bronze

P3563PW Polar White

P3563PN Polished Nickel

P3563PS Polished Stainless

Friction Lift Bath Drain

CTN/MSTR

1/100

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

• 1-1/2” drain

• Coarse thread

PART NO.

FINISH

P35067 Chrome Plated

P3561AL Almond

P3561AB Antique Brass

P3561AN Antique Nickel

P3561BI Biscuit

P3561BL Black

P3561BN Brushed Nickel

P3561BS Brushed Stainless

P3561RB Oil Rubbed Bronze

P3561WB Old World Bronze

P3561PW Polar White

P35068 Polished Brass (PVD)

P3561PN Polished Nickel

P3561PS Polished Stainless

P35611 Satin Nickel

Flip-It Bath Tub Stopper

• No tools needed for installation

• Open or close with a flip of the toe

• Fits most popular tub drains (assorted o-ring included)

• One piece construction Delrin and ABS

PART NO. FINISH

P35070

P35071

Chrome Plated

Polished Brass

CTN/MSTR

100/200

1/100

CTN/MSTR

1/100

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

1/50

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 13

Decorative Bathroom

A

Standard 1-Hole Schedule 40 Lift and Turn

Bath Waste Kits

• 1-hole faceplate

• Bolt holes on top elbows are pre-threaded

• All drains 3/8” thread size for testing

Standard 1-Hole Schedule 40 Toe Touch

Bath Waste Kits

• 1-hole faceplate

• Bolt holes on top elbows are pre-threaded

• All drains 3/8” thread size for testing

Half Kit

PVC# ABS#

B07010 B07011

FINISH

Chrome Plated

B0750BN B0850BN Brushed Nickel

B0750RB B0850RB Oil Rubbed Bronze

B0750WB B0850WB Old World Bronze

B07014 B07015 Polished Brass

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

Half Kit

PVC# ABS#

B07012 B07013

B0754BN B0854BN

B0754RB B0854RB

B07016 —

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

Polished Brass

CTN/MSTR

1/24

1/1

1/1

1/1

• 1-hole faceplate

• Bolt holes on top elbows are pre-threaded

• All drains 3/8” thread size for testing

• 1-hole faceplate

• Bolt holes on top elbows are pre-threaded

• All drains 3/8” thread size for testing

Full Kit

PVC# ABS# FINISH

B07030 B07031 Chrome Plated

B0751BN B0851BN Brushed Nickel

B0751RB B0851RB Oil Rubbed Bronze

B0751WB B0851WB Old World Bronze

B07034 B07035 Polished Brass

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

Full Kit

PVC# ABS#

B07032 B07033

B0755BN B0855BN

B0755RB B0855RB

B0755WB B0855WB

B0755NP —

B07036 B07037

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Pearl Nickel

Polished Brass

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

Standard 1-Hole Schedule 40 Friction Lift

Bath Waste Kits

• 1-hole faceplate

• Bolt holes on top elbows are pre-threaded

• All drains 3/8” thread size for testing

Half Kit

PVC# ABS#

B07052 B07053

FINISH

Chrome Plated

B0752BN B0852BN Brushed Nickel

B0752RB B0852RB Oil Rubbed Bronze

B0752WB B0852WB Old World Bronze

B07054 B07055 Polished Brass

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

• 1-hole faceplate

• Bolt holes on top elbows are pre-threaded

• All drains 3/8” thread size for testing

Full Kit

PVC# ABS# FINISH

B07058 B07059 Chrome Plated

B0753BN B0853BN Brushed Nickel

B0753RB B0853RB Oil Rubbed Bronze

B0753WB B0853WB Old World Bronze

B07060 B07061 Polished Brass

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

14 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

A

A

Standard 2-Hole Schedule 40 Lift and Turn

Bath Waste Kits

• 2-hole faceplate

• Bolt holes on top elbow are pre-threaded

• All drains 3/8” thread size for testing

Decorative Bathroom

Standard 2-Hole Schedule 40 Toe Touch

Bath Waste Kits A

Half Kit

PVC#

B07110

B0711AL

ABS#

B07111

B0811AL

FINISH

Chrome Plated

Almond

B0711AB B0811AB Antique Brass

B0711AN B0811AN Antique Nickel

B0711BI B0811BI Biscuit

B0711BL B0811BL Black

B0711BN B0811BN Brushed Nickel

B0711BS B0811BS Brushed Stainless

B0711RB B0811RB Oil Rubbed Bronze

B0711WB B0811WB Old World Bronze

B0711PW B0811PW Polar White

B07114

B0711PN

B0711PS

B07115

B0811PN Polished Nickel

B0811PS

Polished Brass

Polished Stainless

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

• 2-hole faceplate

• Bolt holes on top elbow are pre-threaded

• All drains 3/8” thread size for testing

Half Kit

PVC#

B07112

B0717AL

ABS#

B07113

B0817AL

FINISH

Chrome Plated

Almond

B0717AB B0817AB

B0717AN —

Antique Brass

Antique Nickel

B0717BI

B0717BL

B0817BI

B0817BL

Biscuit

Black

B0717BN B0817BN Brushed Nickel

B0717BS B0817BS Brushed Stainless

B0717RB B0817RB Oil Rubbed Bronze

B0717WB B0817WB Old World Bronze

B0717PW B0817PW Polar White

B07116 B07117 Polished Brass

B0717PN B0817PN Polished Nickel

B0717PS B0817PS Polished Stainless

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

• 2-hole faceplate

• Bolt holes on top elbow are pre-threaded

• All drains 3/8” thread size for testing

• 2-hole faceplate

• Bolt holes on top elbow are pre-threaded

• All drains 3/8” thread size for testing

Full Kit

PVC#

B07130

B0713AL

ABS#

B07131

B0813AL

FINISH

Chrome Plated

Almond

B0713AB B0813AB Antique Brass

B0713AN B0813AN Antique Nickel

B0713BI

B0713BL

B0813BI

B0813BL

Biscuit

Black

B0713BN B0813BN Brushed Nickel

B0713BS –– Brushed Stainless

B0713RB B0813RB Oil Rubbed Bronze

B0713WB B0813WB Old World Bronze

B0713PW B0813PW Polar White

B07134 B07135 Polished Brass

B0713PN B0813PN Polished Nickel

B0713PS B0813PS Polished Stainless

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Full Kit

PVC#

B07158

ABS#

B07159

B0716AL B0816AL

B0716AB B0816AB

FINISH

Chrome Plated

Almond

Antique Brass

B0716AN B0816AN Antique Nickel

B0716BI B0816BI Biscuit

B0716BL B0816BL Black

B0716BN B0816BN Brushed Nickel

B0716BS B0816BS Brushed Stainless

B0716RB B0816RB Oil Rubbed Bronze

B0716WB B0816WB Old World Bronze

B0716PW B0816PW Polar White

B07160 B07161 Polished Brass

B0716PN B0816PN Polished Nickel

B0716PS B0816PS Polished Stainless

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 15

Decorative Bathroom

A

Standard 2-Hole Schedule 40 Friction Lift

Bath Waste Kits

• 2-hole faceplate

• Bolt holes on top elbow are pre-threaded

• All drains 3/8” thread size for testing

Half Kit

PVC#

B07152

B0715AL

ABS#

B07153

B0815AL

FINISH

Chrome Plated

Almond

B0715AB B0815AB Antique Brass

B0715AN B0815AN Antique Nickel

B0715BI

B0715BL

B0815BI Biscuit

B0815BL Black

B0715BN B0815BN Brushed Nickel

B0715BS –– Brushed Stainless

B0715RB B0815RB Oil Rubbed Bronze

B0715WB B0815WB Old World Bronze

B0715PW B0815PW Polar White

B07154 B07155 Polished Brass

B0715PN B0815PN Polished Nickel

B0715PS B0815PS Polished Stainless

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

Tubular Lift and Turn Bath Waste Kits

• 2-hole faceplate

• Heavy walled PVC tubular

• 1-1/2” IPS threaded drain shoe

• Overflow elbow designed to accommodate B07202 test kit

Full Kit

PVC# ABS# FINISH

P37500

P3750AL

P39500

P3950AL

Chrome Plated

Almond

P3750AB P3950AB Antique Brass

P3750AN P3950AN Antique Nickel

P3750BI

P3750BL

P3950BI

P3950BL

Biscuit

Black

P3750BN P3950BN Brushed Nickel

P3750BS P3950BS Brushed Stainless

P3750RB P3950RB Oil Rubbed Bronze

P3750WB P3950WB Old World Bronze

P3750PW P3950PW Polar White

P3750PN

P3750PS

P37502

P3950PN Polished Nickel

P3950PS Polished Stainless

P39502 Satin Nickel

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/20

1/20

1/1

1/1

1/1

1/1

1/1

1/1

• 2-hole faceplate

• Bolt holes on top elbow are pre-threaded

• All drains 3/8” thread size for testing

Full Kit

PVC#

B07132

ABS#

B07133

FINISH

Chrome Plated

B0718AL B0818AL Almond

B0718AB B0818AB Antique Brass

B0718AN B0818AN Antique Nickel

B0718BI B0818BI Biscuit

B0718BL B0818BL Black

B0718BN B0818BN Brushed Nickel

B0718BS B0817BS Brushed Stainless

B0718RB B0818RB Oil Rubbed Bronze

B0718WB B0818WB Old World Bronze

B0718PW B0818PW Polar White

B07136 B07137 Polished Brass

B0718PN B0818PN Polished Nickel

B0718PS B0818PS Polished Stainless

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Tubular Friction Lift Bath Waste Kits

• 2-hole faceplate

• Heavy walled PVC tubular

• 1-1/2” IPS threaded drain shoe

• Overflow elbow designed to accommodate B07202 test kit

Full Kit

PVC#

P37503

ABS#

P39503

FINISH

Chrome Plated

P3751AL P3951AL Almond

P3751AB P3951AB Antique Brass

P3751AN P3951AN Antique Nickel

P3751BI

P3751BL

P3951BI Biscuit

P3951BL Black

P3751BN P3951BN Brushed Nickel

P3751BS P3951BS Brushed Stainless

P3751RB P3951RB Oil Rubbed Bronze

P3751WB P3951WB Old World Bronze

P3751PW P3951PW Polar White

P3751PN P3951PN Polished Nickel

P3751PS

P37505

P3951PS

P39505

Polished Stainless

Satin Nickel

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/20

1/1

1/1

1/1

1/1

1/20

1/1

1/1

1/1

16 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

A

A

Tubular Toe Touch Bath Waste Kits

• 2-hole faceplate

• Heavy walled PVC tubular

• 1-1/2” IPS threaded drain shoe

• Overflow elbow designed to accommodate B07202 test kit

Decorative Bathroom

27” Cable Drive Bath Waste Kits

A

• 1-1/2” Schedule 40 Cable Drive

Full Kit

PVC# ABS# FINISH

P37506 P39506 Chrome Plated

P3752AL P3952AL Almond

P3752AB P3952AB Antique Brass

P3752AN P3952AN Antique Nickel

P3752BI P3952BI Biscuit

P3752BL P3952BL Black

P3752BN P3952BN Brushed Nickel

P3752RB P3952RB Oil Rubbed Bronze

P3752WB P3952WB Old World Bronze

P3752PW P3952PW Polar White

P3752PN P3952PN Polished Nickel

P3752PS

P37508

P3952PS

P39508

Polished Stainless

Satin Nickel

Tubular Trip Lever Bath Waste Kits

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/20

1/20

1/1

1/1

1/1

1/1

Full Kit

PVC#

P37550

FINISH

Chrome Plated

P3755BN Brushed Nickel

P3755RB Oil Rubbed Bronze

P3755WB Old World Bronze

P3755PB Polished Brass

P3755WH White

2” Metal Spud with 4-1/4” Round Strainer

• 2-hole faceplate

• Heavy walled PVC tubular

• 1-1/2” IPS threaded drain shoe

• Overflow elbow designed to accommodate B07202 test kit

PART NO.

D60981

D6098BN

D6098RB

D6098WB

D60982

D60980

CTN/MSTR

1/10

1/10

1/10

1/10

1/10

1/10

• All brass spud & strainer

• Works with shower drain base D50001

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass

Stainless Steel

CTN/MSTR

1/50

1/50

1/50

1/50

1/50

1/50

Full Kit

PVC#

P37509

ABS#

P39509

FINISH

Chrome Plated

P3761AL P3961AL Almond

P3761AB P3961AB Antique Brass

P3761AN P3961AN Antique Nickel

P3761BI P3961BI Biscuit

P3761BL P3961BL Black

P3761BN P3961BN Brushed Nickel

P3761BS — Brushed Stainless

P3761RB P3961RB Oil Rubbed Bronze

P3761WB P3961WB Old World Bronze

P3761PW P3961PW Polar White

P3761PN P3961PN Polished Nickel

P3761PS

P37511

P3961PS

P39511

Polished Stainless

Satin Nickel

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/20

1/20

1/1

1/1

1/1

1/1

1/1

1/1

3-1/2” Metal Spud with 5” Square Strainer

PART NO.

D60954

D6096BN

D60962

D6096RB

D6096WB

D60960

• All brass spud & strainer

• Works with shower drain base D49804/D49801

FINISH

Chrome Plated

Brushed Nickel

Nickel Bronze

Oil Rubbed Bronze

Old World Bronze

Polished Brass

CTN/MSTR

1/20

1/20

1/20

1/20

1/20

1/20

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 17

Decorative Bathroom

A

2” Brass Spud with 4” Square Strainer

PART NO.

D60942

D6094BN

D6094RB

D6094WB

D6094PB

• All brass spud & strainer

• Grout ring

• Works with shower drain base D50001

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass

2” PVC Spud with 4-1/4” Stamped

Square Strainer

• Snap-in strainer

CTN/MSTR

1/27

1/27

1/27

1/27

1/27

2” x 3” Shower Drain with 2” Spud and

4-1/4” Round Strainer

ASSEMBLED IN USA

• Flow rate - 3.102 GPM

• Cast brass strainer

• Metal spud

PART NO.

D50111

D5001BN

D5001RB

D5001WB

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

CTN/MSTR

1/1

1/1

1/1

1/1

2” x 3” Heavy Duty PVC Shower Drain with

3-1/2” Spud and 5” Round Cast Brass

Strainer

ASSEMBLED IN

• PVC spud

• Round strainer

• For multi-head showers

• Flow rate - 15.260 GPM

• Primer tapped

USA

PART NO.

D5087BN

D5087RB

D5087WB

D50887

FINISH

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Stainless Steel

CTN/MSTR

1/1

1/1

1/1

1/1

2” x 3” Shower Drain with 2” Brass Spud and 4-1/4” Square Strainer

• All brass spud and strainer

• Grout ring

ASSEMBLED IN USA

PART NO.

D49059

D4912BN

D49057

D4912RB

D4912WB

D49055

FINISH

Chrome Plated

Brushed Nickel

Nickel Bronze

Oil Rubbed Bronze

Old World Bronze

Polished Brass

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

3” x 4” Heavy Duty PVC Shower Drain with

3-1/2” Spud and 5” Round Strainer

• Metal spud

• Round strainer

• For multi-head showers

• Flow rate - 15.260 GPM

• Primer tapped

ASSEMBLED IN USA

PART NO.

D50942

D5094BN

D5094RB

D5094WB

18

PART NO.

D5088BN

D5088RB

D5088WB

D50888

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

CTN/MSTR

1/1

1/1

1/1

1/1

PART NO.

D49159

D4991BN

D49157

D4991RB

D4991WB

D49155

FINISH

Chrome Plated

Brushed Nickel

Nickel Bronze

Oil Rubbed Bronze

Old World Bronze

Polished Brass

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

2” x 3” Shower Drain with 2” Spud and

4” Square Snap-in Strainer

• No screws

• Four prong installation

• Plastic spud

ASSEMBLED IN USA

3” x 4” Heavy Duty PVC Shower Drain with

3-1/2” Spud and 5” Square Strainer

• Metal spud

• Square strainer

• For multi-head showers

• Flow rate - 15.260 GPM

• Primer tapped

ASSEMBLED IN USA

FINISH

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Stainless Steel

CTN/MSTR

1/1

1/1

1/1

1/1

PART NO.

D4996BN

D4996RB

D4996WB

FINISH

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

CTN/MSTR

1/1

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

A

A

3” x 4” Heavy Duty PVC Shower Drain with

3-1/2” Plastic Spud and 5” Round Cast

Brass Strainer

• PVC spud

• Round strainer

• For multi-head showers

• Flow rate - 15.260 GPM

• Primer tapped

ASSEMBLED IN USA

PART NO.

D4984BN

D4984RB

D4984WB

FINISH

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

CTN/MSTR

1/1

1/1

1/1

Decorative Bathroom

4-1/4” Round Snap-in Strainer

• For no caulk fiberglass shower stalls

• Fits D40101, D40140 and D50001

• Snap-in prong to snap-in prong - 3”

• Blister packaging

A

PART NO.

D4005BN

D4005RB

D4005WB

D40003

D40010

D40005

D40004

FINISH

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass (PVD)

Satin Nickel

Stainless Steel

White

CTN/MSTR

20/200

1/200

1/200

50/250

20/200

1/200

50/200

2” No Caulk Shower Stall Drain with

4-1/4” Round Snap-in Strainer

PART NO.

D4010BN

D4010RB

D4010WB

• Wrench included

• For 2” CTS order gasket separately

FINISH

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

CTN/MSTR

1/1

1/1

1/1

4-1/4” Square Snap-in Strainer

PART NO.

C60888

C6088BN

C6088RB

C6088WB

• Fits D5088 series drains

• Stamped

• Coverall

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

CTN/MSTR

1/100

10/100

10/100

10/100

4-1/4” Round Cast Brass Heavy Duty Strainer

• Includes screws

• Fits D50001 tile shower drain

• Center to center screwholes- 3-3/8”

PART NO.

C60806

C6089AL

C6089AB

C6089AN

C6089BI

C6089BL

C6089BN

C6089RB

C6089WB

C6089PW

C60810

C6089PN

C6089PS

C60814

4-1/4” Round Stamped Strainer

• Includes screws

• Fits D50001 tile shower drain

• Blister packaging

• Center to center screwholes- 3-3/8”

FINISH

Chrome Plated

Almond

Antique Brass

Antique Nickel

Biscuit

Black

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polar White

Polished Brass (PVD)

Polished Nickel

Polished Stainless

Satin Nickel

CTN/MSTR

1/100

20/400

20/400

20/400

20/400

20/400

20/200

20/200

20/200

20/400

20/400

20/400

20/200

1/100

PART NO.

C6087BN

C6087RB

C6087WB

C60807

FINISH

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass (PVD)

CTN/MSTR

1/100

1/100

1/100

1/100

4-1/4” Square Cast Brass Heavy Duty Strainer

• Includes fine and coarse threaded screws

• Fits D50001 tile shower drain

• Center to center screwholes- 3-3/8”

PART NO.

C6083BN

C6083RB

C6083WB

C60813

FINISH

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass (PVD)

CTN/MSTR

1/100

1/100

1/100

1/100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 19

Decorative Bathroom

A

5.196” Round Cast Brass Heavy Duty Strainer

• Includes screws

• Fits any drain with 3-1/2” PVC spud

• Center to center screwholes- 4-3/8”

PART NO.

C60803

C6084BN

C6084RB

C6084WB

C60804

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass

CTN/MSTR

1/50

1/30

1/30

1/30

1/50

3-1/2” PVC Spud with 5” Round Strainer

PART NO.

D56216

D6084BN

D56214

D6084RB

D6084WB

D56212

D56211

• Fits drain bases tapped for 3-1/2” spuds

FINISH

Chrome Plated

Brushed Nickel

Nickel Bronze

Oil Rubbed Bronze

Old World Bronze

Polished Brass

Stainless Steel

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

“Code Blue” Round Replacement Strainer

3-1/2” Metal Spud with 5” Round Strainer

PART NO.

D64000

D64401

D64001

D6400BN

D6400RB

D6400WB

• Includes screws

• Fits non-adjustable “Code Blue” drains

DESCRIPTION

2” SS

SS Crown

2” Polished Brass (PVD)

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

CTN/MSTR

1/50

1/100

1/100

1/250

1/250

1/250

PART NO.

D60990

D6091BN

D60996

D6091RB

D6091WB

D60991

• All brass

• Fits drain bases tapped for 3-1/2” spuds

FINISH

Chrome Plated

Brushed Nickel

Nickel Bronze

Oil Rubbed Bronze

Old World Bronze

Polished Brass

CTN/MSTR

1/40

1/40

1/30

1/40

1/40

1/40

4” Round Strainer

Polished Brass Escutcheon

PART NO.

D54010

• Includes screws

• Stamped to fit inside plastic ring

• Center to center screwholes- 3.362”

FINISH

Polished Brass (PVD)

CTN/MSTR

1/400

• Low Patten

PART NO.

E80050

E80075

E81375

E81050

DESCRIPTION

1/2” CTS (5/8” OD)

3/4” CTS (7/8” OD)

3/8” IPS

1/2” IPS

CTN/MSTR

25/1000

25/1000

25/1000

25/1000

4-1/4” Round Strainer with Screws for Fiberglass Shower Stalls

PART NO.

D4110BN

D4110RB

D4110WB

D4110PN

D41102

D41107

D41101

• Fits D41001 and D41600

• Tapping screws included

• Center to center screwholes- 2-5/8”

FINISH

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Nickel

Polished Brass (PVD)

Satin Nickel

Stainless Steel

CTN/MSTR

20/200

20/200

20/200

20/200

50/250

50/250

50/250

PART NO.

E82125

E82150

• Box Patten

DESCRIPTION

1-1/4” OD tubular

1-1/2” OD tubular

CTN/MSTR

25/200

25/200

20 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

A

A

Escutcheons

Low Pattern - Copper Tube Size

PART NO. FINISH

E0105BN Brushed Nickel

SIZE

FLANGE

OD

1/2” CTS (5/8” OD) 2-1/2”

E0105RB Oil Rubbed Bronze 1/2” CTS (5/8” OD) 2-1/2”

E0105WB Old World Bronze 1/2” CTS (5/8” OD) 2-1/2”

Low Pattern - Iron Pipe Size

PART NO. FINISH

E0205BN Brushed Nickel

E0205RB Oil Rubbed Bronze

E0205WB Old World Bronze

Box Pattern - Tubular

SIZE

1/2” IPS

1/2” IPS

1/2” IPS

FLANGE

OD

2-1/2”

2-1/2”

2-1/2”

PART NO. FINISH SIZE

E0412BN Brushed Nickel 1-1/4” Tubular

E0412RB Oil Rubbed Bronze 1-1/4” Tubular

E0412WB Old World Bronze 1-1/4” Tubular

E0415BN Brushed Nickel 1-1/2” Tubular

E0415RB Oil Rubbed Bronze 1-1/2” Tubular

E0415WB Old World Bronze 1-1/2” Tubular

Bell Pattern - Copper Tube Size

FLANGE

OD

3”

3”

3”

3”

3”

3”

PART NO. FINISH

E0705BN Brushed Nickel

E0705RB Oil Rubbed Bronze 1/2” CTS (5/8” OD) 2-3/8”

E0705WB Old World Bronze 1/2” CTS (5/8” OD) 2-3/8”

E0705PB Polished Brass 1/2” CTS (5/8” OD) 2-3/8”

Bell Pattern - Iron Pipe Size

SIZE

FLANGE

OD

1/2” CTS (5/8” OD) 2-3/8”

PART NO. FINISH

E0605BN Brushed Nickel

E0605RB Oil Rubbed Bronze

E0605WB Old World Bronze

E0605PB Polished Brass

Bell Pattern - Tubular

SIZE

1/2” IPS

1/2” IPS

1/2” IPS

1/2” IPS

FLANGE

OD

2-3/8”

2-3/8”

2-3/8”

2-3/8”

PART NO. FINISH

E0812BN Brushed Nickel

SIZE

1-1/4” Tubular

E0812RB Oil Rubbed Bronze 1-1/4” Tubular

E0812WB Old World Bronze 1-1/4” Tubular

E0812PB Polished Brass

E0815BN Brushed Nickel

1-1/4” Tubular

1-1/2” Tubular

E0815RB Oil Rubbed Bronze 1-1/2” Tubular

E0815WB Old World Bronze 1-1/2” Tubular

E0815PB Polished Brass 1-1/2” Tubular

FLANGE

OD

3”

3”

3”

3”

3”

3”

3”

3”

CTN/

MSTR

1/100

1/100

1/100

1/100

CTN/

MSTR

1/100

1/100

1/100

1/100

CTN/

MSTR

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

CTN/

MSTR

1/200

1/200

1/200

CTN/

MSTR

1/300

1/300

1/300

CTN/

MSTR

1/100

1/100

1/100

1/100

1/100

1/100

Decorative Bathroom

Polished Brass Finish Flexible Floor and Ceiling Plate A

• Plastic

PART NO.

F08375

F08050

F08124

F08150

DESCRIPTION

3/8” IPS or 1/2” CTS

1/2” IPS or 3/4” CTS

1-1/4” CTS

1-1/2” IPS

Non-Slotted Full Flow Aerator

CTN/MSTR

12/1080

12/1080

12/1440

12/1200

• Dual threads (15/16 -27 male x 55/64 -27 female)

PART NO.

A01019

FINISH

Polished Brass

Brass Nipple

• Lead free

3/8”x 4”

PART NO.

FINISH

N2206BN Brushed Nickel (PVD)

N2206RB Oil Rubbed Bronze

N2206WB Old World Bronze

N17375 Polished Brass

3/8”x 6”

PART NO.

FINISH

N2210BN Brushed Nickel (PVD)

N2210RB Oil Rubbed Bronze

N2210PB Polished Brass

1/2”x 4”

PART NO.

FINISH

N2306BN Brushed Nickel (PVD)

N2306RB Oil Rubbed Bronze

N2306WB Old World Bronze

N17050 Polished Brass

1/2”x 6”

PART NO.

FINISH

N2310BN Brushed Nickel (PVD)

N2310RB Oil Rubbed Bronze

N2310WB Old World Bronze

N2310PB Polished Brass

CTN/MSTR

1/500

SIZE

3/8” x 4”

3/8” x 4”

3/8” x 4”

3/8” x 4”

CTN/MSTR

25/200

25/200

25/200

25/200

SIZE

3/8” x 6”

3/8” x 6”

3/8” x 6”

CTN/MSTR

25/100

25/100

25/100

SIZE

1/2” x 4”

1/2” x 4”

1/2” x 4”

1/2” x 4”

CTN/MSTR

25/200

25/200

25/200

25/200

SIZE

1/2” x 6”

1/2” x 6”

1/2” x 6”

1/2” x 6”

CTN/MSTR

25/100

25/100

25/100

25/100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 21

Decorative Bathroom

A

Sleeves

• Fits over 1/2” CTS

• Brass

PART NO.

FINISH

T73300 Chrome

T7330BN Brushed Nickel (PVD)

T7330RB Oil Rubbed Bronze

T7330WB Old World Bronze

T7330PB Polished Brass (PVD)

SIZE

1/2” x 3-1/2”

1/2” x 3-1/2”

1/2” x 3-1/2”

1/2” x 3-1/2”

1/2” x 3-1/2”

CTN/MSTR

1/200

1/200

1/200

1/200

1/200

Quarter Turn Angle Stop with

5” Sweat Extension and Escutcheon

• Bell escutcheon

• 3/8” OD x 1/2” sweat connection

• Includes hot, cold and blank buttons

PART NO.

S42220

S4222BN

S4222RB

S4222WB

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Quarter Turn Angle Stop

• Cross handle

• Includes hot, cold and blank buttons

• UPC Listed

1/2” FIP x 3/8” OD

PART NO. FINISH

S42021 Chrome Plated

S4202BN Brushed Nickel

S4202RB Oil Rubbed Bronze

S4202WB Old World Bronze

S4202PB Polished Brass (PVD)

5/8” OD x 3/8” OD

PART NO. FINISH

S42031 Chrome Plated

S4203BN Brushed Nickel

S4203RB Oil Rubbed Bronze

S4203WB Old World Bronze

S4203PB Polished Brass

SIZE

1/2” FIP x 3/8” OD

1/2” FIP x 3/8” OD

1/2” FIP x 3/8” OD

1/2” FIP x 3/8” OD

1/2” FIP x 3/8” OD

SIZE

5/8” OD x 3/8” OD

5/8” OD x 3/8” OD

5/8” OD x 3/8” OD

5/8” OD x 3/8” OD

5/8” OD x 3/8” OD

CTN/MSTR

1/50

1/50

1/50

1/50

CTN/MSTR

20/100

20/100

20/100

20/100

20/100

CTN/MSTR

20/100

20/100

20/100

20/100

20/100

Quarter Turn Straight Stop

• Cross handle

• Includes hot, cold and blank buttons

• UPC Listed

1/2” FIP x 3/8” OD

PART NO. FINISH

S43021 Chrome Plated

S4302BN Brushed Nickel

S4302RB Oil Rubbed Bronze

S4302WB Old World Bronze

S4302PB Polished Brass (PVD)

5/8” OD x 3/8” OD

PART NO. FINISH

S43031 Chrome Plated

S4303BN Brushed Nickel

S4303RB Oil Rubbed Bronze

S4303WB Old World Bronze

S4303PB Polished Brass (PVD)

SIZE

1/2” FIP x 3/8” OD

1/2” FIP x 3/8” OD

1/2” FIP x 3/8” OD

1/2” FIP x 3/8” OD

1/2” FIP x 3/8” OD

SIZE

5/8” OD x 3/8” OD

5/8” OD x 3/8” OD

5/8” OD x 3/8” OD

5/8” OD x 3/8” OD

5/8” OD x 3/8” OD

CTN/MSTR

20/100

20/100

20/100

20/100

20/100

CTN/MSTR

20/100

20/100

20/100

20/100

20/100

• Oval handle

• UPC Listed

3/8” FIP x 3/8” OD

PART NO. FINISH

S4311BN Brushed Nickel

S4311RB Oil Rubbed Bronze

S4311WB Old World Bronze

SIZE

3/8” FIP x 3/8” OD

3/8” FIP x 3/8” OD

3/8” FIP x 3/8” OD

Multi-Turn Compression Angle Stop

CTN/MSTR

20/100

20/100

20/100

• UPC Listed

PART NO. FINISH

S4211BN Brushed Nickel

S4211RB Oil Rubbed Bronze

S4211WB Old World Bronze

S4213BN Brushed Nickel

S4213RB Oil Rubbed Bronze

S4213WB Old World Bronze

SIZE

5/8” COMP x 3/8” COMP

5/8” COMP x 3/8” COMP

5/8” COMP x 3/8” COMP

1/2” FIP x 3/8” COMP

1/2” FIP x 3/8” COMP

1/2” FIP x 3/8” COMP

CTN/MSTR

20/100

20/100

20/100

20/100

20/100

20/100

Multi-Turn Compression Straight Stop

• UPC Listed

• Oval handle

• UPC Listed

3/8” OD x 3/8” OD

PART NO. FINISH

S4212BN Brushed Nickel

S4212RB Oil Rubbed Bronze

S4212WB Old World Bronze

SIZE

3/8” OD x 3/8” OD

3/8” OD x 3/8” OD

3/8” OD x 3/8” OD

CTN/MSTR

20/100

20/100

20/100

PART NO. FINISH

S4312BN Brushed Nickel

S4312RB Oil Rubbed Bronze

S4312WB Old World Bronze

S4314BN Brushed Nickel

S4314RB Oil Rubbed Bronze

S4314WB Old World Bronze

SIZE

5/8” COMP x 3/8” COMP

5/8” COMP x 3/8” COMP

5/8” COMP x 3/8” COMP

1/2” FIP x 3/8” COMP

1/2” FIP x 3/8” COMP

1/2” FIP x 3/8” COMP

CTN/MSTR

20/100

20/100

20/100

20/100

20/100

20/100

22 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

A

A

Closet Supply and Stop Kit

• Supply and multi-turn stop

• 1/2” CTS escutcheon

3/8” x 20” Closet Supply and 3/8” x 5/8” Angle Stop Kit

PART NO.

S1037CP

S1037AP

S1037BB

S1037BN

S1037RB

S1037WB

S10371

S1037PS

FINISH

Chrome

Antique Pewter

Brushed Bronze

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass

Polished Stainless

3/8” x 20” Closet Supply and 3/8” x 5/8” Straight Stop Kit

PART NO.

S1038CP

S1038AP

S1038BB

S1038BN

S1038RB

S1038WB

S10381

S1038PS

FINISH

Chrome Plated

Antique Pewter

Brushed Bronze

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass

Polished Stainless

3/8” x 20” Closet Supply and 1/2” x 3/8” Angle Stop Kit

PART NO.

S1039CP

S1039BN

S1039RB

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

3/8” x 20” Closet Supply and 5/8” x 3/8” Angle Stop Kit

PART NO.

S1137BN

S1137RB

FINISH

Brushed Nickel

Oil Rubbed Bronze

3/8” x 20” Closet Supply and 5/8” x 3/8” Straight Stop Kit

PART NO.

S1138BN

S1138RB

FINISH

Brushed Nickel

Oil Rubbed Bronze

Lavatory Supply and Stop Kit

Decorative Bathroom

A

• Supply (2 pieces)

• Multi-turn stop (2 pieces)

• 1/2” CTS escutcheon (2 pieces)

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

3/8” x 20” Lavatory Supply and 3/8” x 5/8” Angle Stop Kit

PART NO.

S1036AP

S1036BN

S1036RB

S1036WB

S10361

FINISH

Antique Pewter

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass

3/8” x 20” Lavatory Supply and 3/8” x 5/8” Straight Stop Kit

PART NO.

S1035AP

S1035BB

S1035BN

S1035RB

S1035WB

S10351

FINISH

Antique Pewter

Brushed Bronze

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass

S1035PS Polished Stainless

3/8” x 20” Lavatory Supply and 1/2” x 3/8” Angle Stop Kit

PART NO.

S1034BN

S1034RB

FINISH

Brushed Nickel

Oil Rubbed Bronze

3/8” x 20” Lavatory Supply and 5/8” x 3/8” Angle Stop Kit

PART NO.

S1136BN

S1136RB

FINISH

Brushed Nickel

Oil Rubbed Bronze

3/8” x 20” Lavatory Supply and 5/8” x 3/8” Straight Stop Kit

PART NO.

S1135BN

S1135RB

FINISH

Brushed Nickel

Oil Rubbed Bronze

Polished Brass Water Supply Tube

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

• Bullnose rigid supply tube

• Lead free

PART NO.

S44002

S44003

S44005

DESCRIPTION

3/8” x 20” basin tube

3/8” x 12” tank tube

3/8” x 20” tank tube

CTN/MSTR

1/100

1/200

1/100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 23

Decorative Bathroom

A

Lavatory Supply Tubes

• Basin supply

• Bullnose rigid supply tube

Tank Trip Levers

• Front mount

• 8” arm

PART NO.

DESCRIPTION

T01003 Brass arm with metal spud and nut

FINISH

PB Metal

T01004

T01007

Brass plated arm with metal spud and nut

AB Metal

Brass arm with metal spud and nut Satin Nickel

CTN/MSTR

25/200

25/200

25/200

3/8” x 12”

PART NO.

FINISH

S04020 Chrome Plated

S4401BN Brushed Nickel

S4401RB Oil Rubbed Bronze

S4401WB Old World Bronze

3/8” x 20”

PART NO.

FINISH

S04022 Chrome Plated

S4402BN Brushed Nickel

S4402RB Oil Rubbed Bronze

S4402WB Old World Bronze

SIZE

3/8” x 12”

3/8” x 12”

3/8” x 12”

3/8” x 12”

SIZE

3/8” x 20”

3/8” x 20”

3/8” x 20”

3/8” x 20”

CTN/MSTR

1/100

1/100

1/100

1/100

CTN/MSTR

1/100

1/100

1/100

1/100

• Front mount

• 8” arm

PART NO.

DESCRIPTION

T01061

Brass plated arm with plastic spud and nut / universal fit

FINISH

PB Metal

• Front mount

• 8” arm

PART NO.

DESCRIPTION

T01006

T01008

Brass arm with metal spud and nut

/ universal fit

Brass arm with die cast nut

FINISH

PB Metal

Satin Nickel

CTN/MSTR

25/200

CTN/MSTR

25/200

25/200

Closet Supply Tubes

• Tank supply

• Flat head rigid supply tube

• Side mount

• 8” arm

PART NO.

DESCRIPTION

T01071

Side mount push button brass arm with plastic spud and nut

T01075

FINISH

PB ABS

Front mount push button brass arm with plastic spud and nut

PB ABS

CTN/MSTR

25/50

25/50

3/8” x 12”

PART NO.

FINISH

S04027 Chrome Plated

S4403BN Brushed Nickel

S4403RB Oil Rubbed Bronze

S4403WB Old World Bronze

3/8 x 20”

PART NO.

FINISH

S04029 Chrome Plated

S4405BN Brushed Nickel

S4405RB Oil Rubbed Bronze

S4405WB Old World Bronze

SIZE

3/8” x 12”

3/8” x 12”

3/8” x 12”

3/8” x 12”

SIZE

3/8” x 20”

3/8” x 20”

3/8” x 20”

3/8” x 20”

CTN/MSTR

1/100

1/100

1/100

1/100

CTN/MSTR

1/100

1/100

1/100

1/100

Tank Trip Levers for Crane*

• Front mount

• 8” arm

PART NO.

DESCRIPTION

T01035 Plastic arm, spud and nut

T01036

T01037

Plastic arm, spud and nut

Plastic arm, spud and nut

FINISH

PB ABS

White ABS

Bone ABS

CTN/MSTR

1/25

1/25

1/25

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Tank Trip Lever for Mansfield*

• Front mount

• 9” arm

24

Ultrafit Tank Trip Lever

• PATENTED

• New shapable arm bends to fit the needed arm angle

• Arm can be cut to fit 4”, 6” or 8” lengths for customized fit

• Heavy duty plastic handle comes in a variety of finishes

• Sturdy plastic arm, spud and nut

PART NO.

FINISH

T01100 Chrome Plated

T01101

T01102

T01103

T04001

Polished Brass

White

Bone

Display for UltraFit Tank levers 12 each of above

CTN/MSTR

1/200

1/200

1/200

1/200

1/1

PART NO.

DESCRIPTION

T01073 #41* plastic arm, spud and nut

FINISH

PB ABS

CTN/MSTR

25/200

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Tank Trip Levers for ToTo*

• Side mount

• 10” brass arm

• Plastic spud and nut

PART NO.

T018BN

T018RB

FINISH

Brushed Nickel

Oil Rubbed Bronze

CTN/MSTR

1/30

1/30

T018WB Old World Bronze 1/30

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

A

A

Decorative Bathroom

Tank Trip Levers for American Standard*

• Front mount

• 9-1/2” arm

PART NO. DESCRIPTION

T01065

Brass arm with metal spud and nut.

Offset for thick walls

• Front mount

• 8” arm

PART NO. DESCRIPTION

T01049

Neo 28° combo with plastic arm, spud and nut

• Front mount

• 6” arm

FINISH CTN/MSTR

PB Metal 25/150

FINISH CTN/MSTR

PB ABS 1/25

PART NO. DESCRIPTION

T01043

45° arm for Cadet 2* plastic arm, spud and nut

T01044

T01045

45° arm with Cadet 2* plastic arm, spud and nut

45° arm with Cadet 2* plastic arm, spud and nut

FINISH CTN/MSTR

PB ABS 1/25

White ABS 1/25

Bone ABS 1/25

Tank Trip Levers for Kohler*

PART NO.

T0108BN

T0108RB

T0108WB

T01181

• Side mount

• 8” brass arm

FINISH

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass

CTN/MSTR

1/50

1/50

1/50

1/50

• Front mount

• 8” arm

PART NO.

DESCRIPTION FINISH CTN/MSTR

T01017

Wellworth/Barrington Lite new style / side mount 1.6 gal. unit replacement

PB Metal 1/125

T01015 Cast brass arm with metal spud and nut PB Metal 1/125

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

A

• Front mount

• 4” arm

PART NO.

DESCRIPTION

T01031

T01032

T01033

Plastic arm, spud and nut for beaded chain

Plastic arm, spud and nut for beaded chain

Plastic arm, spud and nut for beaded chain

FINISH

PB ABS

White ABS

Bone ABS

CTN/MSTR

1/25

1/25

1/25

• Front mount

• 6” arm

PART NO.

DESCRIPTION

T01051

Plastic arm, spud and nut for Plebe* and Cadet*

T01052

Plastic arm, spud and nut for Plabe* and Cadet*

FINISH

PB ABS

White ABS

CTN/MSTR

1/25

1/25

T01053

Plastic arm, spud and nut or Pleve* and Cadet*

Bone ABS 1/25

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Universal Tank Trip Levers

PART NO.

T01000

T0100BN

T0100RB

T0100WB

T0100PB

• Front mount

• 8” arm

• Brass handle and arm

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Polished Brass

CTN/MSTR

6/24

6/24

6/24

6/24

6/24

• Can be used as a front mount or side mount

• 8” adjustable arm

PART NO.

T01330

T0133BN

T0133RB

T0133WB

FINISH

Chrome

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

Tank Trip Levers for Eljer*

• Side mount

• 9” arm

PART NO.

DESCRIPTION

T01021

Brass arm with non-crack nylon spud and nut

• Side mount

• 8” brass arm

FINISH

PB Metal

CTN/MSTR

25/150

PART NO.

T0105BN

T0105RB

T0105WB

• Front mount

• 8” arm

• Elite, heavy duty

FINISH

Brushed Nickel

Oil Rubbed Bronze

Old World Bronze

PART NO.

FINISH CTN/MSTR

T0102BN

T0102RB

Brushed Nickel

Oil Rubbed Bronze

1/50

1/50

T0102WB Old World Bronze 1/50

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

10/50

10/50

10/50

10/50

CTN/MSTR

10/50

10/50

10/50

25

FAU

FAUCETS & BATH ACCESSORIES

Kitchen Faucets ....................................................................... 29-30

Bathroom Faucets .................................................................... 30-31

Tub and Shower Faucets .......................................................... 31-33

Specialty Faucets .......................................................................... 33

Bath Accessories ..................................................................... 34-35

Faucets & Bath Accessories

FAU

*Published December 2019

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 27

FAUCETS & BATH

ACCESSORIES

Volos • Priana • Contractor's Choice

Introducing three collections of faucets and bath accessories from Jones Stephens.

All of our collections are ideal for single family, multi-family and hospitality projects.

Volos

COLLECTION

For a more modern style, the Volos Collection has sharp lines that complement contemporary and modern interior designs.

Priana

COLLECTION

The Priana Collection offers a simple design with familiar traditional details and clean lines.

Contractor's Choice

COLLECTION

The Contractor's Choice Collection offers a full line of fittings for any kitchen or bath application.

finishes

AVAILABLE

Chrome Plated Brushed Nickel Oil Rubbed Bronze Stainless Steel

Volos Kitchen Faucets

• Ceramic cartridge

• Use with baseplate for 8” 3-hole installation

• Use without baseplate for 1-hole installation

• Max flow rate 1.8 GPM (6.8 LPM) at 60PSI

(ASME.A112.18.1M)

• Integral stainless steel braided supply lines with 3/8” COMP connection

• Includes matching soap/lotion dispenser

• Boxed

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

Kitchen Faucets

Priana Kitchen Faucets (cont.)

• Ceramic cartridge

• Use with baseplate for 8” 3-hole installation

• Use without baseplate for 1-hole installation

• Max flow rate 1.8 GPM (6.8 LPM) at 60PSI

(ASME.A112.18.1M)

• Integral stainless steel braided supply lines with 3/8” COMP connection

• Includes matching soap/lotion dispenser

• Boxed

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• ADA Compliant

Hi-Arc Pull-Down Faucet

PART NO.

1559260

1559263

FINISH

Chrome Plated

Stainless Steel

CTN/MSTR

1/6

1/6

Spring Neck Pull-Down Faucet

PART NO.

1559070

1559073

FINISH

Chrome Plated

Stainless Steel

CTN/MSTR

1/6

1/6

Spring Neck Pull-Down Faucet

PART NO.

1559270

1559273

FINISH

Chrome Plated

Stainless Steel

Priana Kitchen Faucets

• Ceramic cartridge

• Use with baseplate for 8” 3-hole installation

• Use without baseplate for 1-hole installation

• Max flow rate 1.8 GPM (6.8 LPM) at 60PSI

(ASME.A112.18.1M)

• Integral stainless steel braided supply lines with 3/8” COMP connection

• Includes matching soap/lotion dispenser

• Boxed

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• ADA Compliant

CTN/MSTR

1/6

1/6

Pull-Out Faucet

PART NO.

1559020

1559023

FINISH

Chrome Plated

Stainless Steel

CTN/MSTR

1/6

1/6

Contractor’s Choice Kitchen Faucets

• Fits 8” center

• 1.8 GPM

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• ADA Compliant

Single Handle Faucet with Spray

PART NO.

1558010

FINISH

Chrome Plated

• 1/2” MPT copper inlets

• Ball style cartridge and POM waterways

• Install with or without spray

CTN/MSTR

1/6

FAU

Priana Hi-Arc Pull-Down Faucet

PART NO.

1559060

1559063

FINISH

Chrome Plated

Stainless Steel

CTN/MSTR

1/6

1/6

Two Handle High Spout Faucet with Spray

PART NO.

1558030

1558031

FINISH

Chrome Plated

Stainless Steel

• Metal threaded shaft

• Install with or without spray

CTN/MSTR

1/6

1/6

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 29

Kitchen Faucets/Bathroom Faucets

Contractor’s Choice Kitchen Faucets

• Fits 8” center

• 1.8 GPM

• Limited lifetime warranty

(cont.)

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• ADA Compliant

Volos Bathroom Faucets (cont.)

• Ceramic cartridge

• Matching pop-up

• Max flow rate 1.2 GPM (4.5 LPM) at 60PSI

(ASME.A112.18.1M)

• Boxed

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• 1/2” MPT copper inlets

• 1/4-Turn washerless stems and POM waterways

• Install with or without spray

• Single hole

• Integral stainless steel braided supply lines with 3/8” COMP connection

Two Handle Faucet with Spray

PART NO.

1558001

1558002

FINISH

Chrome Plated

Stainless Steel

Single Handle Faucet with Spray

PART NO.

1550110

FINISH

Chrome Plated

CTN/MSTR

1/6

1/6

Single Handle Faucet with Pop-up

PART NO.

1559240

1559241

FINISH

Chrome Plated

Brushed Nickel

• 1/2” MPT copper inlets

• Ball style cartridge and POM waterways

CTN/MSTR

1/12

CTN/MSTR

1/6

1/6

Priana Bathroom Faucets

• Ceramic cartridge

• Matching pop-up

• Max flow rate 1.2 GPM (4.5 LPM) at 60PSI

(ASME.A112.18.1M)

• Boxed

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• ADA Compliant

FAU

Volos Bathroom Faucets

• Ceramic cartridge

• Matching pop-up

• Max flow rate 1.2 GPM (4.5 LPM) at 60PSI

(ASME.A112.18.1M)

• Boxed

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• Single hole

• Fits 4” center

• Metal threaded shafts

Two Handle Faucet with Pop-up

PART NO.

1559000

1559001

1559002

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

CTN/MSTR

1/6

1/6

1/6

Two Handle High Spout Faucet with Pop-up

PART NO.

1559230

1559231

FINISH

Chrome Plated

Brushed Nickel

• Three mounting holes

• Fits 4” center

• Metal threaded shafts

• Three mounting holes

• Metal threaded shafts

CTN/MSTR

1/6

1/6

Two Handle Wide Spread Faucet with Pop-up

PART NO.

1559050

1559051

1559052

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

CTN/MSTR

1/6

1/6

1/6

• Three mounting holes

• Metal threaded shafts

• Three mounting holes

• Fits 4” center

• Metal threaded shafts

30

Two Handle Wide Spread Faucet with Pop-up

PART NO.

1559250

1559251

FINISH

Chrome Plated

Brushed Nickel

CTN/MSTR

1/6

1/6

Two Handle High Spout Faucet with Pop-up

PART NO.

1559030

1559031

1559032

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

CTN/MSTR

1/6

1/6

1/6

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Priana Bathroom Faucets (cont.)

• Ceramic cartridge

• Matching pop-up

• Max flow rate 1.2 GPM (4.5 LPM) at 60PSI

(ASME.A112.18.1M)

• Boxed

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• ADA Compliant

Bathroom Faucets/Tub & Shower Faucets

Contractor’s Choice Bathroom Faucets (cont.)

• Fits 4” center

• 1.2 GPM

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• ADA Compliant

(excludes 1550601)

• Three mounting holes

• Metal threaded shafts

• POM waterways, metal cover, acrylic handles • Single hole

• Integral stainless steel braided supply lines with 3/8” COMP connection

Single Handle Faucet with Pop-up

PART NO.

1559040

1559041

1559042

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

Contractor’s Choice Bathroom Faucets

• Fits 4” center

• 1.2 GPM

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• ADA Compliant

(excludes 1550601)

• Three mounting holes

• Metal threaded shafts

• Ball style cartridge and POM waterways, metal cover

Two Handle Handicap Faucet with Grid Drain

PART NO.

1550301

FINISH

Chrome Plated

CTN/MSTR

1/12

CTN/MSTR

1/6

1/6

1/6

Volos Tub/Shower Faucets

• Use with rough-in valve 1559900, 1559901, or

1559902 (sold separately)

• Max flow rate 1.8 GPM (6.8 LPM) at 80PSI

(ASME.A112.18.1M)

• Boxed

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• Rain shower head, shower arm and tub spout

• 10-7/16” shower arm

FAU

Single Handle Faucet with Pop-up

PART NO.

1559010

1559011

1559012

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

• Three mounting holes

• 1/2” MPT copper inlets

• Metal handle and body

CTN/MSTR

1/6

1/6

1/6

Tub/Shower Faucet with Rain Shower Head, Trim Only

PART NO.

1559280

1559281

FINISH

Chrome Plated

Brushed Nickel

• Rain shower head and shower arm

• 10-7/16” shower arm

CTN/MSTR

1/6

1/6

Single Handle Faucet with Stainless Steel Pop-up

PART NO.

1550203

FINISH

Chrome Plated

CTN/MSTR

1/12

• Three mounting holes

• Metal threaded shafts

• POM waterways, metal cover, acrylic handles

Shower Faucet with Rain Shower Head, Trim Only

PART NO.

1559290

1559291

FINISH

Chrome Plated

Brushed Nickel

CTN/MSTR

1/6

1/6

Two Handle Rounded Body Faucet with Pop-up

PART NO.

1550601

FINISH

Chrome Plated

CTN/MSTR

1/12

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 31

Tub & Shower Faucets

Priana Tub/Shower Faucets

• Use with rough-in valve 1559900, 1559901, or

1559902 (sold separately)

• Max flow rate 1.8 GPM (6.8 LPM) at 80PSI

(ASME.A112.18.1M)

• Boxed

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• ADA Compliant

Contractor’s Choice Tub/Shower Faucets (cont.)

• Fits 8” center (unless noted)

• 1.8 GPM

• Brass compression stems and replaceable seats

• Limited lifetime warranty

Meets or exceeds the following:

• IAPMO/CUPC

• Shower head, shower arm and tub spout

• Tub spout, bell escutcheons, shower head and arm

Tub/Shower Faucet, Trim Only

PART NO.

1559080

1559081

1559082

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

CTN/MSTR

1/6

1/6

1/6

Three Handle Tub/Shower Faucet, Heavy Pattern

PART NO.

1855051

FINISH

Chrome Plated

CTN/MSTR

1/6

• Acrylic handles

• Tub spout, bell escutcheons, shower head and arm

• Shower head and shower arm

FAU

Shower Faucet, Trim Only

PART NO.

1559090

1559091

1559092

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

CTN/MSTR

1/6

1/6

1/6

Three Handle Tub/Shower Faucet

PART NO.

1855055

FINISH

Chrome Plated

CTN/MSTR

1/10

• Tub diverter spout, bell escutcheons, shower head and arm

Contractor’s Choice Tub/Shower Faucets

• Fits 8” center (unless noted)

• 1.8 GPM

• Brass compression stems and replaceable seats

• Limited lifetime warranty

Meets or exceeds the following:

• IAPMO/CUPC

Two Handle Tub/Shower Faucet

PART NO.

1854030

FINISH

Chrome Plated

CTN/MSTR

1/10

• Tub spout, bell escutcheons, shower head and arm

• Acrylic handles

• Tub diverter spout, bell escutcheons, shower head and arm

32

Three Handle Tub/Shower Faucet

PART NO.

1855050

FINISH

Chrome Plated

CTN/MSTR

1/10

Three Handle Tub/Shower Faucet

PART NO.

1854015

FINISH

Chrome Plated

CTN/MSTR

1/10

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Contractor’s Choice Tub/Shower Faucets (cont.)

• Fits 8” center (unless noted)

• 1.8 GPM

• Brass compression stems and replaceable seats

• Limited lifetime warranty

Meets or exceeds the following:

• IAPMO/CUPC

Tub & Shower Faucets/Specialty Faucets

Contractor’s Choice Specialty Faucets

• Fits 4” center (Excludes 1828010)

• Limited lifetime warranty

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• ADA Compliant

Two Handle Stall Shower Faucet

PART NO.

1850022

FINISH

• Bell escutcheons, shower head and arm

Chrome Plated

CTN/MSTR

1/12

• POM cartridge and waterways

• Metal threaded shaft

• Stainless steel spout

• 1.8 GPM

Two Handle Gooseneck Bar Faucet

PART NO.

1822025

1822026

FINISH

Chrome Plated

Brushed Nickel

CTN/MSTR

1/12

1/12

• Bell escutcheons, shower head and arm

Two Handle Shower Faucet

PART NO.

1854010

FINISH

Chrome Plated

CTN/MSTR

1/12

• Fits 3 hole laundry sinks

• Non-metallic construction

• Pull out spray head

• 1.8 GPM

Pull-Out Laundry Tray Faucet

PART NO.

1836015

FINISH

Chrome Plated

• Acrylic handles

• Bell escutcheons, shower head and arm

CTN/MSTR

1/12

FAU

Two Handle Shower Faucet

PART NO.

1854035

FINISH

Chrome Plated

Tub/Shower Valves, Rough-In

• Universal valve accepts all Jones Stephens trim kits for tub/shower and shower only installations

• Bath tub port can be plugged for shower only installations

• Integral stop valves on the hot and cold supply lines

• Includes plaster ring to assist in installation and to protect the valve during construction

CTN/MSTR

1/10

Meets or exceeds the following:

• ANSI/ASME A112.18.1M

• ANSI/NSF 61-Sec.9

• IAPMO/CUPC

• Shower head, shower arm and tub spout

• ADA Compliant

• POM cartridge and waterways

• Metal threaded shaft

• 1.2 GPM

Two Handle Handicap Laundry Tray Faucet

PART NO.

1836050

FINISH

Chrome Plated

CTN/MSTR

1/12

• Solid brass body, chrome plated handles

• Top supply with 1/2” IPS unions

• 1/4 turn stems

• Includes garden hose adapter

• 1.2 GPM

Two Handle Laundry Tray Faucet, Top Supply

PART NO.

1828010

FINISH

Rough Brass

CTN/MSTR

1/12

1559900

PART NO.

1559900

1559901

1559902

1559901 1559902

DESCRIPTION

1/2” NPT

Crimp PEX F1807

Expansion PEX F1960

CTN/MSTR

1/6

1/6

1/6

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 33

Bath Accessories

Volos Bath Accessories

• Furnished with mounting brackets, heavy duty drywall anchors and screws

• Boxed

Priana Bath Accessories

• Furnished with mounting brackets, heavy duty drywall anchors and screws

• Boxed

24” Towel Bar

PART NO.

97900

97901

FINISH

Chrome Plated

Brushed Nickel

18” Towel Bar

PART NO.

97910

97911

FINISH

Chrome Plated

Brushed Nickel

FAU

Towel Ring

PART NO.

97920

97921

FINISH

Chrome Plated

Brushed Nickel

Toilet Paper Holder

PART NO.

97940

97941

FINISH

Chrome Plated

Brushed Nickel

CTN/MSTR

1/10

1/10

24” Towel Bar

PART NO.

97950

97951

97952

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

CTN/MSTR

1/10

1/10

18” Towel Bar

PART NO.

97960

97961

97962

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

CTN/MSTR

5/20

5/20

Towel Ring

PART NO.

97970

97971

97972

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

CTN/MSTR

5/20

5/20

Toilet Paper Holder

PART NO.

97980

97981

97982

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

CTN/MSTR

1/10

1/10

1/10

CTN/MSTR

1/10

1/10

1/10

CTN/MSTR

5/20

5/20

5/20

CTN/MSTR

5/20

5/20

5/20

Robe Hook

PART NO.

97930

97931

FINISH

Chrome Plated

Brushed Nickel

CTN/MSTR

5/20

5/20

Robe Hook

PART NO.

97990

97991

97992

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

CTN/MSTR

5/20

5/20

5/20

34 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Contractor’s Choice Bath Accessories

• Furnished with mounting brackets, heavy duty drywall anchors and screws

• Concealed screws

• Boxed

• 3/4”

• Zinc

Towel Bar Brackets

PART NO.

97180

97170

FINISH

Chrome Plated

Brushed Nickel

CTN/MSTR

5/50

5/50

18” Towel Bar

PART NO.

97960

97961

97962

• Bar only

• Polished stainless

FINISH

Chrome Plated

Brushed Nickel

Oil Rubbed Bronze

• 3/8” diameter ring

• Zinc

Towel Ring

PART NO.

62062

62070

FINISH

Chrome Plated

Brushed Nickel

CTN/MSTR

1/10

1/10

1/10

CTN/MSTR

6/96

6/96

• Spring loaded white plastic roller

• Zinc

Toilet Paper Holder

PART NO.

97187

36214

FINISH

Chrome Plated

Brushed Nickel

CTN/MSTR

6/96

6/96

• 3/8” diameter ring

• Zinc

Double Robe Hook

PART NO.

97897

97896

FINISH

Chrome Plated

Brushed Nickel

CTN/MSTR

1/50

1/50

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Bath Accessories

FAU

35

B

SECTION B - SPECIALTIES & REPAIR

Toilet Repairs .......................................................................... 39-51

Kitchen & Bath ........................................................................ 52-77

Plumbing Connectors ............................................................... 78-80

Supply Stops ........................................................................... 80-81

Sink Faucets ............................................................................ 81-82

Drinking Fountain Bubbler ............................................................ 82

Gas Connectors ...................................................................... 83-87

Specialties & Repair

B

*Published December 2019

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 37

Toilet Repairs

MFR.

American Standard*

Crane*

Eljer*

Kohler*

Mansfi eld*

Universal Rundle*/Sears*

TANK LEVER TO TANK REFERENCE CHART

PART NO.

FINISH

SECTION

PAGE NO.

B2

TANK STYLE

T01030

T01031

T01032

T01033

T01042

CP ABS

PB ABS

White ABS

Bone ABS

CPS ABS

DECORATIVE

(SECT. A)

B2

Glenwall with vent #4049.177

Compack with vent #4052.346

Norwall with vent #4041.091

T01043

T01044

T01045

PB ABS

White ABS

Bone ABS

DECORATIVE

(SECT. A)

Cadet II #4072

Cadet #4029

Cadet II #4014

Ellisse #4075

High Hamilton - 1 pc. #2096

Hamilton - 1 pc. #2092

T01048

T01049

T01050

CPS ABS

PB ABS

CPS ABS

B2

DECORATIVE

(SECT. A)

B2

Carlyle #2010.031

New Cadet line

T01051

T01052

T01053

PB ABS

White ABS

Bone ABS

DECORATIVE

(SECT. A)

Glenwall #2093

Cadet #2108

Cadet #2109

Cadet #2120

Cadet #2124

Plebe #2131

Plebe #2138

Plebe #2139

Plebe Aquameter

T01064

T01065

CP Metal

PB Metal

B2

DECORATIVE

(SECT. A)

Old style, thick walled

T01034 CPS ABS B2

Galaxy

New Galaxy

Sante Fe

Avon

Antigua

T01020

T01021

T01010

T01012

T01015

T01016

T01017

T01040

T01073

CP Metal

PB Metal

CP Metal

CP Metal

PB Metal

CP Metal

PB Metal

CPS ABS

PB ABS

B3

DECORATIVE

(SECT. A)

B3

B3

DECORATIVE

(SECT. A)

B3

DECORATIVE

(SECT. A)

B3

DECORATIVE

(SECT. A)

New Emblem

Wellworth*/Barrington* - Old Style

Kohler 9400

Wellworth*/Barrington Lite* - Old Style

Mansfi eld #35

Mansfi eld #51

Mansfi eld #8

Mansfi eld #16

Mansfi eld #35LT

T01072

T01041

T01066

T01067

CP Metal

PB Metal

CP Metal

PB Metal

B3

DECORATIVE

(SECT. A)

B3

DECORATIVE

(SECT. A)

Mansfi eld old style #42

Saturn 4012

Low Boy 4445

*The manufacturers’ names are used only to describe whose products the tank levers will fi t. The tank levers are not manufactured by those companies.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

B

39

Toilet Repairs

Fit-All Tank Trip Lever

8” • Front mount

• 8” arm

• Bagged

B

PART NO. DESCRIPTION FINISH

T01001 Brass arm with metal spud and nut CP Metal

T01002

Brass plated arm with metal spud and nut

CP Metal

CP Metal T01200 Aluminum arm with zinc spud and nut

T01201

Aluminum arm with plastic spud and nut

T01099 Replacement spud nut

8”

CP Metal

Zinc

• Front mount

• 8” arm

• Economy

CTN/ MSTR

25/200

25/200

25/200

25/200

1/25

PART NO. DESCRIPTION

T01060

Brass plated arm with plastic spud and nut/universal fit

8”

FINISH CTN/ MSTR

CP Metal 25/200

• Front mount

• 8” arm

Tank Trip Levers for American Standard*

9 ½”

• Front mount

• 9-1/2” arm

PART NO. DESCRIPTION

T01064

Brass arm with metal spud and nut offset for thick tank walls

4”

PART NO. DESCRIPTION

T01030

Plastic arm, spud and nut for beaded chain

FINISH CTN/ MSTR

CP Metal 25/150

• Front mount

• 4” arm

FINISH CTN/ MSTR

CP ABS 25/250

45°

• Front mount

• 6” arm

6”

PART NO. DESCRIPTION

T01042

45° arm for Cadet 2* plastic arm, spud and nut

FINISH

CP ABS

CTN/ MSTR

1/200

PART NO. DESCRIPTION

T01062 Plastic arm, spud and nut/universal fit

8”

FINISH

CP ABS

CTN/ MSTR

• Front mount

• 8” arm

• Heavy Duty

25/125

PART NO. DESCRIPTION

T01005

Brass arm with metal spud and nut/universal fit

8”

FINISH

CP Metal

• Front mount

• 8” arm

• Premium

CTN/ MSTR

25/150

PART NO. DESCRIPTION

T01068

Flat brass arm with metal spud and nut/universal fit

8”

FINISH CTN/ MSTR

CP Metal 25/200

• Side mount

• 8” arm

6”

PART NO. DESCRIPTION

T01050

Plastic arm, spud and nut for

Plebe* and Cadet*

28°

4” 6” 8”

• Front mount

• 6” arm

FINISH CTN/ MSTR

CP ABS 1/25

• Front mount

• 4”, 6” or 8” arm

PART NO. DESCRIPTION FINISH CTN/ MSTR

T01048

Neo 28° combo with plastic arm, spud and nut

CP ABS 1/200

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Tank Trip Lever for Crane*

PART NO. DESCRIPTION

T01070

Push button brass arm with plastic spud and nut/universal fit

8”

FINISH CTN/ MSTR

CP ABS 25/50

• Front mount

• 8” arm

8”

• Front mount

• 8” arm

PART NO. DESCRIPTION FINISH CTN/ MSTR

T01034 Plastic arm, spud and nut CP ABS 25/250

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Tank Trip Lever for Eljer* PART NO. DESCRIPTION

T01074

Push button brass arm with plastic spud and nut/universal fit

FINISH CTN/ MSTR

CP ABS 25/50

9”

• Side mount

• 9” arm

40

PART NO. DESCRIPTION FINISH CTN/ MSTR

T01020

Brass arm with non-crack nylon spudand nut

CP Metal 25/200

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

B

B

Tank Trip Levers for Kohler*

8”

Bead Chain

• Side mount

• 8” arm

PART NO. DESCRIPTION

T01010

T01016

Wellworth*/Barrington* Old style/

Plastic arm (less bead hook), spud and nut

Wellworth*/Barrington Pressure Lite ® *

New style/ 1.6 gal. unit replacement

Plastic arm, spud and nut

8”

FINISH

CP Metal

CP Metal

CTN/ MSTR

25/125

25/125

• Front mount

• 8” arm

PART NO. DESCRIPTION FINISH CTN/ MSTR

T01012

Cast brass arm with metal spud and nut

CP Metal 25/125

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Toilet Repairs

Ultrafit Tank Trip Lever

• Bagged

• Patented!

• Heavy Duty plastic arm, spud and nut

• Display Available- Part No. T04001

• Shapeable arm bends to fit the needed arm angle

• Arm can be cut to 4”, 6” or 8” lengths for customized fit

• Fits American Standard*, Eljer*, Kohler*, Mansfield* and ToTo*

PART NO. DESCRIPTION FINISH CTN/MSTR

T01100 Ultrafit tank lever CP ABS 25/200

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

B

Tank Trip Lever for Western Pottery*

• Side mount

• 10” arm

PART NO. DESCRIPTION

T01080

FINISH

Brass arm with plastic spud and nut CP Metal

CTN/MSTR

25/200

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Tank Trip Levers for Mansfield*

#41*

(9”) • Front mount

• 9” arm

T01040

PART NO. DESCRIPTION

T01040 #41* Plastic arm, spud and nut

#42*

(10”)

FINISH CTN/ MSTR

CP ABS 1/25

• Front mount

• 10” arm

PART NO. DESCRIPTION FINISH CTN/ MSTR

T01072

#42* Brass arm with plastic spud and nut

CP Metal 25/100

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Tank Trip Lever for ToTo*

• Side mount

• 10” arm

PART NO. DESCRIPTION FINISH CTN/MSTR

T01081 Brass arm with plastic spud and nut CP Metal 25/200

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Eljer* Touch Flush* Assembly

• Complete with tank, lever, chain, ball and arm

• CARTON QUANTITIES ONLY

Tank Trip Lever for Universal Rundle*/Sears*

PART NO. DESCRIPTION

C04019 Touch Flush assembly

FINISH

CP ABS

CTN/MSTR

1/5

* The manufacturers’ names are used only to describe whose products the products will fit.

• Front mount

• 8” arm

8”

PART NO. DESCRIPTION FINISH CTN/ MSTR

T01066 Brass arm with plastic spud and nut CP Metal 25/200

* The manufacturers’ names are used only to describe whose products the tank levers will fit. The tank levers are not manufactured by those companies.

Tank Ball and Seat Disc

• Rubber

• New boxing to protect

shape of units

• Rated to160°F

• CARTON QUANTITIES ONLY

C04020 C04021 C04030

C04031

PART NO. DESCRIPTION

C04020 Eljer* tank ball for touch flush

C04021 Fit-All tank ball less guide

CTN/MSTR

1/10

1/10

C04030 2-1/4”- 2-5/8” Tri-seal tank ball 1/100

C04031 3” Tri-seal tank ball 1/100

* The manufacturers’ names are used only to describe whose products the products will fit.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 41

Toilet Repairs

American Standard* Seat Disc Tank Ball

B

• For small tilt flush valves

• Units are in a plastic housing to protect the shape of

the seats

• CARTON QUANTITIES ONLY

C04024 T02025

PART NO. DESCRIPTION

C04024

T02025

Screw-on unit black

C04025 Snap-on unit black

Combo seat disc, snap-on and screw-on

CTN/MSTR

1/25

1/25

1/25

* The manufacturers’ names are used only to describe whose products the products will fit.

Float Ball

• Fits 1/4” rod

• Made of high density poly

• CARTON QUANTITIES ONLY ON THE C05041

PART NO. DESCRIPTION

C05040 Plastic 4” x 5”

C05041 Copper 4” x 5”

CTN/MSTR

1/24

12/72

Kohler* Rialto™ Flapper

C04028 C04029

• 5 year warranty

• Blister carded for easy display

• Made from high grade chlorazone

• Resists chemicals and toilet tank cleaners

PART NO. DESCRIPTION FITS KOHLER* MODELS CTN/MSTR

C04028

Kohler Flapper

2010 BP

Rialto, San Raphael, Santa Martine and Rosario

12/72

C04029

Sharkfin Flapper

2012 BP

Rialto, San Raphael, Santa Rosa,

Revival and Gabrielle

12/72

* The manufacturers’ names are used only to describe whose products the products will fit.

2 Way Flapper with Separate Trunion

• Siliconized chemical resistant material

• Stainless steel chain

Flappers PART NO. DESCRIPTION

C04002 2 way flapper

CTN/MSTR

1/10

C04005 C04006 C04007

Carded Blue Vinyl Flapper

• 5 year warranty on flapper life

• Chemical resistant

• Individually carded

• Soft body replacement flapper

• 9” stainless steel chain and hook

PART NO. DESCRIPTION

C04004 Carded blue fit-all vinyl flapper

C04008

• High grade vinyl construction

• New boxing to protect shape of units

C04010 C04011

PART NO. DESCRIPTION CTN/MSTR

C04005

C04006

C04007

C04008

3 way with strap (fits plastic, brass and old Crane* 57 flush valves)

3 way with stainless chain and strap (fits plastic, brass and old Crane* 57 flush valves)

Standard unit with 9” chain and strap

Kohler* unit with 8” chain

25/100

25/100

1/10

50/200

C04010 Crane* unit with 9” chain 50/200

C04011

Eljer* original unit with rigid arms and foam cone with beaded chain

1/10

* The manufacturers’ names are used only to describe whose products the products will fit.

Blue Vinyl Flapper

• 5 year warranty

• Chemical resistant

• Fits most plastic flush valves

• Easily installed- no collar to cut

• 9” stainless steel chain and hook

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

C04014 Blue vinyl flapper

Jumbo ToTo* Style Flapper

PART NO. DESCRIPTION CTN/MSTR

C04000 Blue flapper (Power Gravity) 1/10

C04001 Red flapper (G-Max) 1/10

* The manufacturers’ names are used only to describe whose products the products will fit.

Red Korky ® Plus Flapper

• 5 year warranty

• Chemical resistant

• Individually carded in cartons of 12

PART NO. DESCRIPTION

C04016 Red Korky ® Plus (2001BP)

CTN/MSTR

25/100

CTN/MSTR

1/80

CTN/MSTR

12/72

42

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

B

B

Korky ® Plus Ultra Water Saver Flapper

Korky ®

• 5-year manufacturer’s warranty

• The most universal

2” flapper

• Adjusts to match OEM performance in all tank sizes including 1.28, 1.6, 3.5 and 5+ gpf toilets

• Adjusts to save water in any tank size

• Korky® red Chorazone® rubber resists chlorine

PART NO. DESCRIPTION

C04038 Korky ® Plus ultra water saver flapper (100BP)

Flapper

C04032 Fits Kohler ® * Class Five™ Flapper

• Larger 3 1/4” replacement flapper

• Replaces Kohler ® * No. 1016546 & 1042313

• Engineered materials resist chlorine

CTN/MSTR

1/12

Toilet Repairs

Korky ® 1.6 Adjustable Flapper

• Chemical resistant

• Easy to install and adjust

• Individually carded in cartons of 12

• Flush volume changes with just a twist

• Can be used as a water saving device

• Adjustable sealing ball for precise water control

• Universal design fits most popular brands of 1.6 toilets

PART NO. DESCRIPTION

C04027 Korky ® 1.6 adjustable flapper (16BP)

CTN/MSTR

12/72

B

Korky ® Plus Adjustable Flapper

• Adjust flush volume with

movable float on chain

• Slide the float up for water

savings or down for increased flush volume

• Korky® red Chorazone® rubber resists chlorine

PART NO. DESCRIPTION

C04013 Korky ® Plus adjustable flapper (2004BP)

CTN/MSTR

1/12

C04032

C04033 Fits Eljer ® *Titan™ Flapper

• Replaces Eljer ® * No. 495-6077-00

• Engineered materials resist chlorine

C04033

C04034 Fits American Standard ® * Cadet 3 ® Flapper

• Replaces American Standard ® * No. 738920-0070P

• Engineered materials resist chlorine

C04034

PART NO. DESCRIPTION

C04032 Fits Kohler ® * Class Five™ flapper (3010BP)

CTN/MSTR

1/5

C04033 Fits Eljer ® *Titan™ flapper (3030BP) 1/5

C04034 Fits American Standard ® * Cadet 3 ® flapper (3040BP)

* The manufacturers’ names are used only to describe whose products the products will fit.

1/5

Closet Spud

• Cast brass

• Includes spud washer and metal friction ring

PART NO.

C27125

C27150

DESCRIPTION

1-1/4” closet spud

1-1/2” closet spud

CTN/MSTR

25/100

25/100

C27200

C27201

2” closet spud

2” x 1-1/4” closet spud

25/75

25/100

C27202

C27127

2” x 1-1/2” closet spud

1-1/2” x 1-1/4” closet spud

25/75

25/100

C27150A 1-1/2” (For American Standard*) closet spud 25/100

* The manufacturers’ names are used only to describe whose products the products will fit.

The Original Korky ® Flapper

• No tank centering

• Assures a positive seal

• Easy fingertip operation

• Individually carded cartons

• Eliminates lift wire misalignment

• Chemical resistant in areas with poor water quality

PART NO. DESCRIPTION CTN/MSTR

C04015 (54 BP) 12/72

C04017 Fits Kohler* (58 BP) 10/100

* The manufacturers’ names are used only to describe whose products the products will fit.

Urinal Spud

PART NO.

C27134

C27126

C27310

• Cast brass

• Includes spud washer and metal friction ring

DESCRIPTION

1” x 3/4” urinal spud

1-1/4” x 3/4” urinal spud

1-1/2” x 3/4” urinal spud

Korky ® Plus 3 Universal Flapper

• 5-year manufacturer’s warranty

• Universal design fits large 3” flush valves

• Adjusts to match OEM performance for all 3” flapper-based systems

• Korky® red Chorazone® rubber resists chlorine

PART NO. DESCRIPTION

C04039 Korky ® Plus 3 universal toilet flapper (3060BP)

CTN/MSTR

1/5

Closet Spud Washer

PART NO.

C27301

C27302

C27303

C27304

C27305

C27308

C27309

• Rubber

• CARTON QUANTITIES ONLY

DESCRIPTION

1-1/4” closet spud washer

1-1/2” closet spud washer

2” closet spud washer

2” x 1-1/4” closet spud washer

2” x 1-1/2” closet spud washer

1” x 3/4” closet spud washer

1-1/4” x 3/4” closet spud washer

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

25/200

25/125

25/100

CTN/MSTR

25/500

25/500

25/500

25/500

25/500

25/1000

25/500

43

Toilet Repairs

Closet Spud Friction Ring

B

PART NO.

C27321

C27322

C27323

C27324

C27325

C27328

• Zinc plated

• CARTON QUANTITIES ONLY

DESCRIPTION

1-1/4” friction ring

1-1/2” friction ring

2” friction ring

2” x 1-1/4” friction ring

2” x 1-1/2” friction ring

1” x 3/4” friction ring

Flush Valve Shank Washer

• Rubber

• 3-1/16” OD x 2-1/4” ID

CTN/MSTR

25/1000

25/1000

25/500

25/500

25/500

25/500

Beveled Bibb Washer

• Rubber

• Priced per carton

• 100 pieces per carton

• CARTON QUANTITIES ONLY

PART NO.

O25302

O25303

O25304

O25305

O25306

O25307

O25308

O25309

O25310

SIZE

1/4”

1/4”

1/4”

1/4”

3/8”

3/8”

3/8”

1/2”

1/2”

TRADE SIZE

00

0

1/4

1/4L

3/8

3/8M

3/8L

1/2

1/2L

OD

1/2”

17/32”

9/16”

19/32”

5/8”

21/32”

11/16”

3/4”

25/32”

Sponge Closet Gasket

CTN/MSTR

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

• All have 2 bolt holes

• 5-1/2” center-to-center

PART NO. DESCRIPTION

T02028 3/8” Height flush valve shank washer

Aqua Seal Washer

• Rubber

• American Standard* Top Hat Washer

• CARTON QUANTITIES ONLY

CTN/MSTR

1/100

PART NO. DESCRIPTION CTN/MSTR

T85057 Aqua seal washer 1/100

* The manufacturers’ names are used only to describe whose products the products will fit.

Beveled Ballcock Shank Washer

• Rubber

• 1 3/4” OD x 15/16”ID

G13500 G13534 G13634

PART NO. OD x ID x THICKNESS

G13534 5-3/8” x 3-1/2” x 3/4”

G13516 5-3/8” x 3-1/2” x 9/16”

G13634 6-3/4” x 3-1/2” x 3/4”

G13601 6-3/4” x 3-1/2” x 1”

G13616 6-3/4” x 3-1/2” x 9/16”

G13638 6-3/4” x 3-1/2” x 3/8”

G13500 4-3/8” x 2-7/8” x 1/2” wall hung urinal

Brass Lift Wire Guide

CTN/MSTR

10/200

10/232

10/80

10/80

10/80

10/80

10/225

• Fit-All

• CARTON QUANTITIES ONLY

44

PART NO. DESCRIPTION

T85056 1/2” beveled ballcock shank washer

Flat Bibb Washer

PART NO.

O25202

O25203

O25204

O25205

O25206

O25207

O25208

O25209

O25210

SIZE

1/4”

1/4”

1/4”

1/4”

3/8”

3/8”

3/8”

1/2”

1/2”

• EPDM rubber

• Priced per carton

• 100 pieces per carton

CTN/MSTR

1/100

C05056 C05057

PART NO. DESCRIPTION

C05056 Adjustable heavy pattern

C05057 Standard split ring

Brass Lift Wire

• CARTON QUANTITIES ONLY

CTN/MSTR

25/500

25/500

TRADE SIZE

00

0

1/4

1/4L

3/8

3/8M

3/8L

1/2

1/2L

OD

1/2”

17/32”

9/16”

19/32”

5/8”

21/32”

11/16”

3/4”

25/32”

CTN/MSTR

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

PART NO. DESCRIPTION

C05045 4 1/2” lower

C05046 5” lower

C05047 5 1/2” lower

C05048 8” upper

C05049 9” upper

Copper Refill Tube

• 1/2” IPS

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

C05051 9” refill tube

CTN/MSTR

25/1000

25/1000

25/1000

25/1000

25/1000

CTN/MSTR

25/1000

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

B

B

Brass Float Rod

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

C05052 1/4”x 8” float rod

C05053 1/4”x 10” float rod

C05054 1/4”x 12” float rod

Brass Overflow Tube

• 22 gauge

PART NO. DESCRIPTION

C05042 1” x 1 1/8” x 10” overflow tube

Mansfield* Style Ballcock

• All brass

• Compound lever

• Genuine Mansfield ballcock

CTN/MSTR

25/500

25/500

25/500

CTN/MSTR

1/200

PART NO. DESCRIPTION CTN/MSTR

T02075 Brass ballcock 1/50

* The manufacturers’ names are used only to describe whose products the products will fit.

Mansfield* Style Ballcock with Float Rod

Toilet Repairs

Douglas Flush Valve

C05070 C05071

PART NO. DESCRIPTION

C05070 Plastic with stainless steel chain

C05071 Brass

• Brass unit includes split guide

• Plastic unit includes flapper tank ball

• Includes locknut, beveled washer

• Bagged

CTN/MSTR

1/50

1/50

B

Korky ® Universal 3” Valve Seal

• 5-year manufacturer’s

warranty

• Replacement seals for

tower style flush valves

• Fits Kohler ® * Class Five™ & Class Six™

• Fits American Standard ® * Champio ® 3

• Korky ® red Chorazone ® rubber resists chlorine

PART NO. DESCRIPTION CTN/MSTR

C05085 Korky ® universal 3” valve seal

* The manufacturers’ names are used only to describe whose products the products will fit.

1/5

Korky ® Flush Valve Seal for Champion ® 4

• 5-year manufacturer’s

warranty

• Replaces American Standard ® * No. 7301111-0070A

• Korky ® red Chorazone ® rubber resists chlorine

PART NO. DESCRIPTION CTN/MSTR

C05086 Korky ® flush valve seal for Champion ® 4

* The manufacturers’ names are used only to describe whose products the products will fit.

1/5

Korky ® QuietFill Valve

• 5 year guarantee

• Resists chlorine

PART NO. DESCRIPTION CTN/MSTR

T03008 Ballcock with float rod #08 1/20

* The manufacturers’ names are used only to describe whose products the products will fit.

PART NO. DESCRIPTION

C05200 Korky ® QuietFill valve (5282)

CTN/MSTR

1/24

Mansfield* Flush Valve #210

Intergral Float Fill Valve

• Water saver

• 3.5 gal. toilets

• Instant shut-off

• Won’t rust or corrode

• Fits most toilets

• Replace all of the complicated mechanisms

wth this simple kit

• Adjustable height from 9” to 13”

• Adjustable float for adjustable water height

• Similar to Fluidmaster®* 400A

• Similar to Korky 528Z PART NO. DESCRIPTION CTN/MSTR

T02066 Flush valve 1/50

* The manufacturers’ names are used only to describe whose products the products will fit.

PART NO. DESCRIPTION

T02070 Integral float fill valve

CTN/MSTR

1/12

* The manufacturers’ names are used only to describe whose products the products will fit.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 45

Toilet Repairs

American Standard* Toilet Repair Parts Ballcock Repair Parts for

Amerline*/Hoov-R-Line*

T02020 T02021 T02022

B

T02023 T02024 T02026

PART NO. DESCRIPTION CTN/MSTR

T02020

T02021

T02022

#5 (33642-07) old style low profile actuator unit, black, with disc, chain, clip and grommet

#6 (72880-07) old style high profile actuator unit, complete, black, with disc, chain, clip and grommet

#4 (8162-07) old style high profile actuator unit with legs, for one piece low boy*with brass flush valves, complete, black with disc, chain, clip, grommet and legs

25/50

25/50

25/50

T02023

T02024

#4 (70711-07) old style Cadet* water saver actuator unit, white with blue cap complete with disc, chain, clip and grommet

Chain kit complete for all actuator units (American

Standard* 8321-07) 8” chain

50/100

50/500

T02026

#4 (47107-07) new style complete flush valve unit, white, short actuator

1/5

T02027

#5 (47089-07) complete flush valve tall black for standard two-piece closets

50/100

* The manufacturers’ names are used only to describe whose products the products will fit.

PART NO. DESCRIPTION CTN/MSTR

T02050 Standard kit with 4 screws 1/25

* The manufacturers’ names are used only to describe whose products the products will fit.

Ballcock Repair Parts for Kohler*

PART NO. DESCRIPTION CTN/MSTR

T02051 Black plunger with cap and seal 1/10

* The manufacturers’ names are used only to describe whose products the products will fit.

Ballcock Repair Parts for Fluidmaster*

T02052 T02053

PART NO. DESCRIPTION

T02052

Diaphragm N/S heavy duty white for hard water and chloramines (Ref. 242F)

CTN/MSTR

1/10

T02053 Standard black diaphragm (Ref. 242) 1/10

* The manufacturers’ names are used only to describe whose products the products will fit.

Ballcock Repair Parts for

American Standard*

46

T02035 T02036

PART NO. DESCRIPTION

T02035 7307 cap and plunger with seat, new style

CTN/MSTR

1/10

T02036 N3010 ballcock plunger with thumb hole 1/10

* The manufacturers’ names are used only to describe whose products the products will fit.

Ballcock Repair Parts for Coast*

T02037 T02038 T02039

PART NO. DESCRIPTION

T02037

Coast 1B1*, 1B1P*, standard large head kit with 3 screws

CTN/MSTR

1/10

T02038 Coast 1B1A*, smaller head kit with 3 screws 1/10

T02039

Coast 1B1X*,Kohler*, UR*, Eljer*, Briggs*, American

Standard*, kits with 3 screws, high and low boy

1/10

* The manufacturers’ names are used only to describe whose products the products will fit.

T02062

• Original Mansfield* parts

T02064 T02065

PART NO. DESCRIPTION

T02062

T02064

08 ballcock repair kit

208/209 flush valve diaphragm

CTN/MSTR

1/10

10/50

T02065 210/211 flush valve seal 10/700

* The manufacturers’ names are used only to describe whose products the products will fit.

Dual Flush Toilet Kit

• Simple to install

• Save water with every flush!

• Push one way to rinse liquid

• Push the other way to flush solids

PART NO. DESCRIPTION

T02067 Dual flush toilet kit

CTN/MSTR

1/40

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

B

B

Toilet Tank Cover

• Fit-All

• White plastic

• Fits most tanks with outside dimensions of 21-1/8”x 7-3/8” or less

PART NO. DESCRIPTION

T02005 White tank cover

Enduro Closet Bolt

• Never Rusts

• Space age material

• Fits all closet flange styles

• Withstands over 1,000 PSI

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

C02050 5/16” x 2-1/2” closet bolt

CTN/MSTR

1/1

CTN/MSTR

50 pairs/500 pairs

• Priced per display

• 50 closet bolts packaged in a convenient refillable counter display

PART NO. DESCRIPTION

CJ1003 5/16” x 2-1/2” closet bolt display

CTN/MSTR

1/1

Toilet Repairs

“Bucket Of Bolts”

• Attractive counter/shelf display

• Closet bolts are custom packed

(2 bolts, nuts, and washers per bag)

PART NO.

CB2021

CB2030

CB2022

CB2031

CB2023

CB2032

CB2024

CB2033

CB2025

CB2034

PART NO.

CB2001

CB2011

CB2002

CB2012

CB2003

CB2013

CB2004

CB2014

CB2005

CB2015

Brass Plated Bolts, Zinc Plated Washers and Zinc Plated Acorn Nuts

SIZE

1/4” x 2-1/4”

1/4” x 2-1/4”

1/4” x 3-1/2”

1/4” x 3-1/2”

5/16” x 1-3/4”

5/16” x 1-3/4”

5/16” x 2-1/4”

5/16” x 2-1/4”

5/16” x 3-1/2”

5/16” x 3-1/2”

WASHER

Oval

Round

Oval

Round

Oval

Round

Oval

Round

Oval

Round

Brass Bolts, Stainless Washers and Nickel Plated Acorn Nuts

CTN/MSTR

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

SIZE

1/4” x 2-1/4”

1/4” x 2-1/4”

1/4” x 3-1/2”

1/4” x 3-1/2”

5/16” x 1-3/4”

5/16” x 1-3/4”

5/16” x 2-1/4”

5/16” x 2-1/4”

5/16” x 3-1/2”

5/16” x 3-1/2”

WASHER

Oval

Round

Oval

Round

Oval

Round

Oval

Round

Oval

Round

CTN/MSTR

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

B

Flexible and Rigid Super Shims

• Stackable

• Rigid, can be driven

• Flexible, can be trimmed

• Priced per bag

• 10 per bag

PART NO. DESCRIPTION

S55950 1-1/8” x 1-15/16” x 1/4” flexible

S55951 1-1/8” x 1-15/16” x 1/4” rigid

• 200 super shims packaged in a convenient refillable counter display

• Priced per display

CTN/MSTR

1 bag of 10/400

1 bag of 10/400

PART NO. DESCRIPTION

S55952 Flexible super shims display

S55953 Rigid super shims display

CTN/MSTR

1/1

1/1

Closet Bolts with Tinnerman Nuts

• Two each bolts, nuts, round washers and tinnerman nuts per bag

• CARTON QUANTITIES ONLY

Closet Wedge Shims

• Stackable

• 3/8” width x 1-3/8” length x 5/16” height

• Easily trimmed to desired height

• Priced per bag

• 100 per bag

PART NO. DESCRIPTION

S55902 Closet wedge shims

• 1000 shims packaged in a convenient refillable counter display

• Priced per display

PART NO. DESCRIPTION

S55903 Closet wedge shims display

CTN/MSTR

1/1

CTN/MSTR

1/1

Brass Plated Bolts, Zinc Plated Washers and Zinc Plated Tinnerman Nuts

PART NO.

C02401

C02402

C02403

C02404

C02405

SIZE

1/4” x 2-1/4”

1/4” x 3-1/2”

5/16” x 1-3/4”

5/16” x 2-1/4”

5/16” x 3-1/2”

Brass Bolts, Stainless Washers and Nickel Plated Tinnerman Nuts

CTN/MSTR

50 pairs/400

50 pairs/200

50 pairs/200

50 pairs/200

50 pairs/200

PART NO.

C02421

C02990

C02422

C02423

C02424

SIZE

1/4” x 2-1/4”

1/4” x 3-1/2”

5/16” x 1-3/4”

5/16” x 2-1/4”

5/16” x 3-1/2”

CTN/MSTR

50 pairs/400

50 pairs/200

50 pairs/400

50 pairs/400

50 pairs/200

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 47

Toilet Repairs

Closet Bolts

B

• Closet bolts are custom packed

(2 bolts, nuts, and washers per bag)

• CARTON QUANTITIES ONLY

Brass Plated Bolts, Zinc Plated Washers and Zinc Plated Acorn Nuts

Brass Bolts, Stainless Washers, Nickel Plated Acorn Nuts

PART NO.

C02020

C02029

C02021

C02030

C02022

C02031

C02023

C02032

C02024

C02033

C02025

C02034

PART NO.

C02000

C02010

C02001

C02011

C02002

C02012

C02003

C02013

C02004

C02014

C02005

C02015

SIZE

1/4” x 1-3/4”

1/4” x 1-3/4”

1/4” x 2-1/4”

1/4” x 2-1/4”

1/4” x 3-1/2”

1/4” x 3-1/2”

5/16” x 1-3/4”

5/16” x 1-3/4”

5/16” x 2-1/4”

5/16” x 2-1/4”

5/16” x 3-1/2”

5/16” x 3-1/2”

SIZE

1/4” x 1-3/4”

1/4” x 1-3/4”

1/4” x 2-1/4”

1/4” x 2-1/4”

1/4” x 3-1/2”

1/4” x 3-1/2”

5/16” x 1-3/4”

5/16” x 1-3/4”

5/16” x 2-1/4”

5/16” x 2-1/4”

5/16” x 3-1/2”

5/16” x 3-1/2”

WASHER

Oval

Round

Oval

Round

Oval

Round

Oval

Round

Oval

Round

Oval

Round

WASHER

Oval

Round

Oval

Round

Oval

Round

Oval

Round

Oval

Round

Oval

Round

CTN/MSTR

50 pairs/400

50 pairs/400

50 pairs/400

50 pairs/400

50 pairs/400

50 pairs/200

50 pairs/400

50 pairs/400

50 pairs/200

50 pairs/200

50 pairs/200

50 pairs/200

CTN/MSTR

50 pairs/400

50 pairs/200

50 pairs/400

50 pairs/400

50 pairs/200

50 pairs/200

50 pairs/200

50 pairs/200

50 pairs/200

50 pairs/200

50 pairs/200

50 pairs/200

Closet Bolts

• Bulk Packed - One each bolt, nut, washer and acorn nut per bag

• CARTON QUANTITIES ONLY

PART NO.

C02020B

C02029B

C02021B

C02030B

C02022B

C02031B

C02023B

C02032B

C02024B

C02033B

C02025B

C02034B

Brass Plated Bolts, Zinc Plated Washers and Zinc Plated Acorn Nuts

PART NO.

C02000B

C02010B

C02001B

C02011B

C02002B

C02012B

C02003B

C02004B

C02014B

C02005B

C02015B

SIZE

1/4” x 1-3/4”

1/4” x 1-3/4”

1/4” x 2-1/4”

1/4” x 2-1/4”

1/4” x 3-1/2”

1/4” x 3-1/2”

5/16” x 1-3/4”

5/16” x 2-1/4”

5/16” x 2-1/4”

5/16” x 3-1/2”

5/16” x 3-1/2”

WASHER

Oval

Round

Oval

Round

Oval

Round

Oval

Oval

Round

Oval

Round

Brass Bolts, Stainless Washers and Nickel Plated Acorn Nuts

CTN/MSTR

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

SIZE

1/4” x 1-3/4”

1/4” x 1-3/4”

1/4” x 2-1/4”

1/4” x 2-1/4”

1/4” x 3-1/2”

1/4” x 3-1/2”

5/16” x 1-3/4”

5/16” x 1-3/4”

5/16” x 2-1/4”

5/16” x 2-1/4”

5/16” x 3-1/2”

5/16” x 3-1/2”

WASHER

Oval

Round

Oval

Round

Oval

Round

Oval

Round

Oval

Round

Oval

Round

CTN/MSTR

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

100 each/400

48

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

B

B

Closet Bolt Component Parts

Toilet Repairs

Snap-Off Closet Bolts

• 2 bolts, nuts, and washers per bag

• Available boxed or in counter display

Closet Bolt Closet Screw Tinnerman Nut

Closed Acorn Nut Open Acorn Nut Oval Washer

PART NO.

C02040

C02045

C02041

C02046

SIZE

1/4” x 2-1/4”

1/4” x 2-1/4”

5/16” x 2-1/4”

5/16” x 2-1/4”

WASHER

Oval

Round

Oval

Round

CTN/MSTR

50 pairs/400

50 pairs/400

50 pairs/200

50 pairs/200

B

Round Washer

PART NO. DESCRIPTION

C02800 1/4” x 1-3/4” brass plated closet bolt

C02801 1/4” x 2-1/4” brass plated closet bolt

C02802 1/4” x 3-1/2” brass plated closet bolt

C02803 5/16” x 1-3/4” brass plated closet bolt

C02804 5/16” x 2-1/4” brass plated closet bolt

C02805 5/16” x 3-1/2” brass plated closet bolt

C02820 1/4” x 1-3/4” brass closet bolt

C02821 1/4” x 2-1/4” brass closet bolt

C02822 1/4” x 3-1/2” brass closet bolt

C02823 5/16” x 1-3/4” brass closet bolt

C02824 5/16” x 2-1/4” brass closet bolt

C02825 5/16” x 3-1/2” brass closet bolt

C02830 1/4” x 2-1/4” brass snap-off closet bolt

C02832 5/16” x 2-1/4” brass snap-off closet bolt

C02808 1/4” x 2-1/2” brass plated closet screw

C02815 1/4” x 3-1/2” brass plated closet screw

C02811 5/16” x 2-1/2” brass plated closet screw

C02812 1/4” x 2-1/2” brass closet screw

C02813 1/4” x 3-1/2” brass closet screw

C02814 5/16” x 2-1/2” brass closet screw

C02806 1/4” tinnerman nut

C02807 5/16” tinnerman nut

C02860 1/4” x 7/16” nickel plated open acorn nut

C02861 1/4” x 7/16” zinc plated open acorn nut

C02862 5/16” x 9/16” nickel plated open acorn nut

C02863 5/16” x 9/16” zinc plated open acorn nut

C02809 1/4” x 7/16” zinc plated closed acorn nut

C02810 5/16” x 9/16” zinc plated closed acorn nut

C02900 1/4” nickel plated closed acorn nut

C02901 5/16” nickel plated closed acorn nut

C02864 1/4” brass open acorn nut

C02865 5/16” brass open acorn nut

C02850 Oval stainless steel washer

C02851 Oval zinc plated washer

C02852 Round stainless steel washer

C02853 Round zinc plated washer

100/4000

100/2500

100/4000

100/2500

100/4000

100/5000

100/4000

100/5000

100/5000

100/700

100/800

100/1000

100/1000

100/3500

100/3500

100/5000

100/5000

100/3000

100/3000

100/2500

CTN/MSTR

100/1200

100/1200

100/700

100/700

100/800

100/500

100/1500

100/1200

100/700

100/1000

100/800

100/500

100/1000

100/800

100/1000

100/1000

PART NO.

CB2040

CB2045

CB2041

CB2046

• 50 pairs packaged in a convenient refillable counter display

• Priced per display

SIZE

1/4” x 2-1/4”

1/4” x 2-1/4”

5/16” x 2-1/4”

5/16” x 2-1/4”

Closet Bolt - Elite Packs

WASHER

Oval

Round

Oval

Round

• CARTON QUANTITIES ONLY

Packed with 4 Acorn Nuts and 4 Round Washers

PART NO. DESCRIPTION

C02989 5/16” x 1-3/4” brass plated bolts

C02999 1/4” x 2-1/4” brass plated bolts

C02998 1/4” x 2-1/4” solid brass bolts

C02997 1/4” x 3-1/2” brass plated bolts

C02996 1/4” x 3-1/2” solid brass bolts

C02992 1/4” x 2-1/4” solid brass bolts

C02993 5/16” x 2-1/4” brass plated bolts

Packed with 2 Acorn Nuts, 2 Hex Nuts, and 4 Round Washers

PART NO. DESCRIPTION

C02995 1/4” x 2-1/4” brass plated bolts

C02994 1/4” x 2-1/4” solid brass bolts

CTN/MSTR

50 pairs/400

50 pairs/400

50 pairs/400

50 pairs/200

50 pairs/200

50 pairs/400

50 pairs/200

CTN/MSTR

50 pairs/400

50 pairs/400

Packed with 2 Acorn Nuts, 2 Hex Nuts, 4 Round Washers, and 2 Tinnerman Nuts

PART NO. DESCRIPTION

C02987 1/4” x 2-1/4” solid brass bolts

CTN/MSTR

50 pairs/400

Closet Bolt Cap

Oval Cap

One Cap and Washer Per Bag

Round Cap

PART NO. DESCRIPTION

C02100 Oval white (less washer)

C02105 Round white (with washer)

C02106 Round bone (with washer)

Two Caps and Washers Per Bag

PART NO. DESCRIPTION

C02103 Round white (with washer)

C02104 Round bone (with washer)

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

50 pairs/1

50 pairs/1

50 pairs/1

50 pairs/1

• Plastic

• Priced per bag

• CARTON QUANTITIES ONLY

CTN/MSTR

100/900

100/2000

100/4000

CTN/MSTR

50 pairs/50

50 pairs/50

49

Toilet Repairs

Closet Screws Tank to Bowl Bolt Kit for Mansfield*

• Two each screws, nuts, and washers per bag

• CARTON QUANTITIES ONLY

B

With Round Washer With Oval Washer

Brass Plated Bolts, Stainless Washers and Nickel Plated Acorn Nuts

PART NO.

C02200

C02210

C02203

C02202

C02211

C02201

SIZE

1/4” x 2-1/2”

1/4” x 2-1/2”

1/4” x 3-1/2”

1/4” x 3-1/2”

5/16” x 2-1/2”

5/16” x 2-1/2”

WASHER

Oval

Round

Oval

Round

Oval

Round

CTN/MSTR

50 pairs/200

50 pairs/400

50 pairs/200

50 pairs/200

50 pairs/200

50 pairs/200

Brass Bolts, Stainless Washers and Nickel Plated Acorn Nuts

PART NO.

C02300

C02310

C02303

C02302

C02311

C02301

SIZE

1/4” x 2-1/2”

1/4” x 2-1/2”

1/4” x 3-1/2”

1/4” x 3-1/2”

5/16” x 2-1/2”

5/16” x 2-1/2”

WASHER

Oval

Round

Oval

Round

Oval

Round

CTN/MSTR

50 pairs/400

50 pairs/400

50 pairs/200

50 pairs/400

50 pairs/200

50 pairs/200

• Includes 3 brass plated bolts, 3 hex nuts, 3 round washers,

1 sponge rubber gasket, 1 ballcock coupling nut and 3 cloth inserted washers

• 3” bolt

PART NO. DESCRIPTION CTN/MSTR

C03260 Mansfield* kit 1/25

* The manufacturers’ names are used only to describe whose products the products will fit.

Tank to Bowl Bolt Kit for Gerber*

• Includes 2 brass bolts, 2 hex nuts, 4 round washers, 1 sponge rubber gasket and 4 cloth inserted washers

PART NO. DESCRIPTION CTN/MSTR

C03265 Gerber* kit 1/25

* The manufacturers’ names are used only to describe whose products the products will fit.

Tank to Bowl Bolt Kit for American

Standard*

• Includes 2 bolts, 4 nuts, 4 round washers and 1 sponge rubber gasket

Tank to Bowl Set

• Universal fit sponge rubber gasket

• Domed poly wingnut fits into china, eliminating bottom washer

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

C03250 5/16” x 3”

C03251 5/16” x 3” with gasket

C03252 5/16” x 3”

C03253 5/16” x 3” with gasket

BOLT CTN/MSTR

Brass Plated 25/200 (pairs)

Brass Plated 25/200 (pairs)

Brass 25/200 (pairs)

Brass 25/200 (pairs)

PART NO. DESCRIPTION

C03270 American Standard* kit (brass plated bolts)

CTN/MSTR

1/25

C03271 American Standard* kit (brass bolts) 1/25

* The manufacturers’ names are used only to describe whose products the products will fit.

Tri-Tank to Bowl Bolt Kit for

American Standard*

• Includes 3 brass plated bolts, 6 hex nuts, 6 round washers,

1 sponge rubber gasket and 6 cloth inserted washers

Tank to Bowl Bolt Set

PART NO. DESCRIPTION CTN/MSTR

C03272 American Standard* kit 1/25

* The manufacturers’ names are used only to describe whose products the products will fit.

• Universal fit sponge rubber gasket

• CARTON QUANTITIES ONLY

With Wing Nut

PART NO. DESCRIPTION

C03200 5/16” x 3”

C03201 5/16” x 3” with gasket

C03202 5/16” x 3”

C03203 5/16” x 3” with gasket

With Hex Nut

PART NO. DESCRIPTION

C03210 5/16” x 3”

C03211 5/16” x 3” with gasket

C03212 5/16” x 3”

C03213 5/16” x 3” with gasket

With Hex Nut and Wing Nut

PART NO. DESCRIPTION

C03240 5/16” x 3”

BOLT CTN/MSTR

Brass Plated 50 pairs/200

Brass Plated 25 pairs/200

Brass

Brass

50 pairs/200

25 pairs/200

BOLT CTN/MSTR

Brass Plated 50 pairs/200

Brass Plated 25 pairs/200

Brass 50 pairs/200

Brass 25 pairs/100

BOLT

Brass

CTN/MSTR

50 pairs/100

Tri-Bolt Tank to Bowl Bolt Set

• For units requiring 3-bolt attachment

• 3 brass bolts, 6 round washers, 6 hex nuts and 6 cloth inserted washers

PART NO. DESCRIPTION

C03280 5/16” x 3” bolt set

CTN/MSTR

1/25

Offset Tank to Bowl Bolts

• All brass

• Rubber washers

• 2” maximum adjustment

PART NO. DESCRIPTION

C02075 Offset tank to bowl bolts

CTN/MSTR

50/200

50

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

B

B

Toilet Repairs

Tank to Bowl Components Wax Gaskets

• Boxed

• CARTON QUANTITIES ONLY

C03800 C03803 C03804

C03805 C03807

C02852

PART NO.

DESCRIPTION

C03800 5/16”-18 x 3” brass plated tank bolt

C03801

C03803

5/16”-18 x 3” brass tank bolt

5/16”-18 brass plated forged wing nut

C03804

C03805

C03807

C03810

C02852

5/16”-18 brass plated heavy hex jam nut

5/16”-18 brass heavy hex jam nut

5/16” acetal tank bowl wing nut

Cloth inserted washer

Stainless steel washer

C03810

CTN/MSTR

100/500

100/500

100/500

100/5500

100/5000

100/3500

10/100

100/5000

Standard Wax Gasket With Plastic Flange

PART NO. DESCRIPTION

G13001 Full size standard wax gasket

G13002 Wax gasket with plastic flange

G13003 Wax urinal gasket- fits 2” outlet

G13004 Jumbo wax gasket

G13006 Jumbo wax gasket with plastic flange

• Neoprene

• Easy installation

• Unaffected by radiant heat

• Seals effectively with uneven floors

PART NO. DESCRIPTION

G13005 3-3/4” ID x 5-1/8” OD x 1/2” thick

CTN/MSTR

1/48

1/24

1/12

1/12

1/12

Radiant Seal Sponge Rubber Closet Gasket

CTN/MSTR

1/150

B

Tank to Bowl Gaskets

C03300 C03301 C03302

Closet Bend Spacer

• Fit-all

• Eliminates the need to chip out concrete

• 6” OD x 4” high (fits 3” and 4” waste lines)

• Keeps poured concrete away from waste lines and closet bends

• Replaces styrofoam, styrene coverings, coffee cans and duct tape

• Outside is plastic, inside is foam

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

S12005 Closet bend spacer

CTN/MSTR

18/18

C03303

• Close coupled tank to bowl gaskets

• Beveled sponge rubber material

• CARTON QUANTITIES ONLY

C03304 C03305

Universal Fit-All

PART NO.

DESCRIPTION

C03300 2-1/4” ID x 3-3/8” OD x 11/16” thick

CTN/MSTR

25/1000

Kohler* (fits Alamo and other Kohler* integral units with two piece closets)

PART NO.

C03301

Eljer* (rubber)

DESCRIPTION

2-1/2” ID x 3-3/4” OD x 3/4” thick

CTN/MSTR

25/1000

CTN/MSTR

25/1000

PART NO.

DESCRIPTION

C03302 2-5/16” ID x 3-1/8” OD x 3/8” thick

American Standard Cadet*, Kohler*, Crane*, Borg Warner*

PART NO.

DESCRIPTION

C03303 2-1/8” ID x 3-1/2” OD x 1-1/4” thick

Crane*

PART NO.

DESCRIPTION

C03304 2-1/8” ID x 3-1/4” OD x 1-1/16” thick

Gerber* (free standing late models)

CTN/MSTR

25/300

CTN/MSTR

25/300

PART NO.

DESCRIPTION

C03305 2-1/8” ID x 3-1/4” OD x 1-3/16” thick

Mansfield*

CTN/MSTR

25/300

PART NO.

DESCRIPTION CTN/MSTR

C03306 2-1/2” ID x 3-5/8” OD x 3/4” thick 25/200

* The manufacturers’ names are used only to describe whose products the products will fit.

Styrofoam Closet Flange Spacer

Foam Spacer

• Eliminates needless chipping of concrete

• Styrofoam breaks away or melts with flame

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

S13130 3” Flange spacer

S13140 4” Flange spacer

PART NO. DESCRIPTION

S13240 4”x 4” foam spacer

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

120/120

120/120

• Foam closet bend protector

• CARTON QUANTITIES ONLY

CTN/MSTR

60/60

51

Kitchen & Bath

Shower Rod Flanges

• Flanges fit 15/16” and 1” OD rod

• Mount to wall

Aluminum Shower Rod with Holders

• 1” OD - .025 wall (22 gauge)

• Individually wrapped rods and holders boxed together

• CARTON QUANTITIES ONLY

B

52

S02150

S02151

S02152

PART NO. DESCRIPTION

S02150 Jiffy flange chrome plated plastic

S02151 Jiffy flange chrome die cast zinc

S02152 Chrome flanges with screws (bagged)

Jumbo Shower Bar Flange

PART NO. DESCRIPTION

S02300 Jumbo shower bar flange

CTN/MSTR

1/200

1/100

50/500

CTN/MSTR

1/50

Contoured Shower Rod

PART NO. DESCRIPTION

S02190 Chrome Plated shower rod

S02193 Satin Nickel shower rod

Flanges

PART NO. DESCRIPTION

S02290 Chrome flanges (Fits S02190)

S02293 Satin Nickel flanges (Fits S02193)

• Brings shower curtain in front of wall to prevent gaps and leaks

• Perfect for 60° oval or standard tubs

• Adjusts easily with tube cutter for shorter walls

• Sweeping curve increases space in center of oval tubs

• Sturdy alloy rods with zinc angled mounting brackets

• Multiple applications - residential, hotel, motel, assisted living, etc.

CTN/MSTR

1/12

1/6

CTN/MSTR

1/1

1/1

PART NO. DESCRIPTION

S02197

S02198

Chrome Plated

Brushed Nickel

Aluminum Shower Rod

• Easy installation

• Anchors included

• Brings shower curtain in front of wall to prevent gaps and leaks

CTN/MSTR

1/1

1/2

PART NO. DESCRIPTION

S02055 5’ rod

S02015

S02056

S02016

5’ rod

6’ rod

6’ rod

• 1” OD - .025 wall (22 gauge)

• Individually wrapped

• Can be cut

• CARTON QUANTITIES ONLY

CTN QTY

1/50

1/10

1/50

1/10

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

PART NO. DESCRIPTION

S02057

S02058

S02059

S02071

5’ rod with plastic Jiffy flange

5’ rod with die cast Jiffy flange

5’ rod with chrome flange and screws

5’ rod with chrome flange and screws (10 pack)

S02072

S02073

S02074

6’ rod with chrome flange and screws (10 pack)

5’ rod with plastic Jiffy flange (10 pack)

6’ rod with plastic Jiffy flange (10 pack)

Adjustable Aluminum Shower Rod

• Sturdy, self-supporting rod with plastic ends

• 1” OD/.025 wall (22 gauge)

• Expandable from 58” to 61” or 69” to 73”

• Individually wrapped

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

S02070

S02066

S02069

Adjustable shower rod 58”- 61”

Adjustable shower rod 69”- 73”

Adjustable shower rod 58”- 61” (10 pack)

Deluxe Shower Head

• Chrome plated die cast zinc

• 2.5 gpm flow rate

• Brass ball

PART NO. DESCRIPTION

S01004 Chrome plated deluxe shower head

Shower Heads

CTN QTY

1/50

1/50

1/50

1/10

1/10

1/10

1/10

CTN QTY

1/50

1/50

1/10

CTN/MSTR

1/100

Plastic

• 2.5 gpm flow rate

Plastic

Die cast

PART NO. DESCRIPTION

S01001 2” Chrome with plastic ball

S01002 2” White with plastic ball

S01003 2” Chrome with brass ball

Die Cast

PART NO. DESCRIPTION

S01005 2” Chrome- adjustable

Brass

PART NO. DESCRIPTION

S01008 1-3/4” Chrome- adjustable

S01009 2-1/8” Chrome- adjustable

S01010 3” Chrome- adjustable

Brass

CTN/MSTR

1/100

1/200

1/100

CTN/MSTR

1/100

CTN/MSTR

1/50

1/50

1/20

Brass Aerating Water Saver Shower Head

• Permanent built-in water restrictor

• Mixes air and water for invigorating spray

• Restricts water to 2-2.5 GPM, depending on water pressure

S01013 S01014

PART NO. DESCRIPTION

S01013

S01014

1” Chrome

1” Chrome with shutoff

CTN/MSTR

50/200

50/200

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Vandal Proof Shower Head

• Chrome plated plastic

• 2.5 GPM flow rate

• Brass ball

• Spray adjusts from coarse to fine

• Secures with set screw, hex key included

PART NO. DESCRIPTION

S01015 Chrome plated plastic shower head

Adjustable Plastic Shower Head

• Chrome plated plastic

• 1.5 GPM flow rate

• Brass ball

CTN/MSTR

1/100

PART NO. DESCRIPTION

S01016 Chrome plated adjustable plastic shower head

Adjustable Massage Shower Head

CTN/MSTR

1/100

• Chrome plated plastic

• 2.5 GPM flow rate

• Brass ball

PART NO. DESCRIPTION

S01020 Chrome plated adjustable massage plastic shower head

CTN/MSTR

1/100

Kitchen & Bath

Shower Arm and Flange with Set Screw

• 1/2” x 6” shower arm

PART NO. DESCRIPTION

S01042 6” Shower arm and flange with set screw

Plastic Shower Arm

• 1/2” x 6” chrome-plated plastic with flange

PART NO. DESCRIPTION

S01049 6” Plastic shower arm and flange

Shower Arm Flange

CTN/MSTR

1/150

CTN/MSTR

1/200

B

Octagonal Shower Head

S01041

PART NO. DESCRIPTION

S01040

S01041

S01040

Chrome flange with set screw (2-1/2” OD)

Stainless steel flange (2-1/2” OD)

Shower Curtain Pin

• CARTON QUANTITIES ONLY

CTN/MSTR

40/400

50/2000

• 2.5 GPM flow rate

• Brass ball

PART NO. DESCRIPTION

S01025 Chrome plated octagonal shower head

Shower Arms and Kits

Shower Arm Shower Arm with Flange

• Chrome plated stainless steel arms

PART NO. DESCRIPTION

S01030 6” Arm only

S01032

S01044

8” Arm only

6”Arm and stainless steel flange

S01045

S01035

S01038

8” Arm and stainless steel flange

8” “S” shaped arm

10” “S” shaped arm

Heavy Adjustable Shower Arm

• Chrome plated brass

• 10” length

• Locking wing nut adjustment

PART NO. DESCRIPTION

S01039 1/2” x 10” adjustable

CTN/MSTR

10/50

“S” Style Shower Arm

CTN/MSTR

1/200

1/100

1/25

1/100

10/80

25/50

CTN/MSTR

10/50

PART NO. DESCRIPTION

S02100 Shower curtain pin

PVC Shower Pan Liner Cement

• 3 year shelf life

• Not for PE liner use

• Instant contact strength

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

S99100 Shower pan liner cement (pint)

Water Volume Control

CTN/MSTR

500/2000

Shower Pan Liner

• 40 mil thickness flexible gray PVC

• Meets ASTM D4551

• PVC

• Marked in 6 inch increments for easy measurements

• Treated to prevent the growth of fungus, molds and mildew

• UPC listed

• FREIGHT LINE ONLY

PART NO. DESCRIPTION

S994050 4’ x 50’ shower pan liner

S995040 5’ x 40’ shower pan liner

S996050 6’ x 50’ shower pan liner

S996080 5’ x 80’ shower pan liner

CTN/MSTR

1/1

1/1

1/1

1/1

CTN/MSTR

12/12

• 1/2” female x 1/2” male IPS

• Allows reduced water flow (does not shut water completely off)

PART NO. DESCRIPTION

S01060

S01061

Chrome-brass water volume control

Chrome-plastic water volume control

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

50/200

1/500

53

Kitchen & Bath

Plastic Flow Restrictor

• 2.5 GPM

• Fits most heads

PART NO. DESCRIPTION

S01080 Shower head flow restrictor

B

54” D-Style Add-A-Shower

27” 36”

54”

10”

61”

• Heavy duty jumbo flanges

• 61” riser with shower head

• Standard bathcock (3 3/8” centers)

• 54” x 27” chrome plated aluminum shower rod (1” diameter)

• Non-adjustable

3/4" MIP

PART NO. DESCRIPTION

S10083 54” x 27” D-Style Add-A-Shower

CTN/MSTR

1/5

Add-A-Shower Complete Unit

CTN/MSTR

1/1000

10”

36”

3/8” IPS

61”

• Bathcock with diverter spout

• Chrome plated plastic shower head

• 61” rise with 10” rod and riser support

• 24” x 42” rectangular aluminum shower rod with 36” ceiling rod and support

Add-A-Shower Diverter Spout and Riser

3/8” IPS

61”

Stub Out

3/4” OR 1/2” FIP THREAD

PART NO. DESCRIPTION

S10071 Spout and riser

• Diverter valve

• 61” riser with wall support

• Chrome plated plastic shower head

• Includes 1” wall bracket (S10077)

• S10081 replacement diverter with base connection

Add-A-Shower Code Pattern Diverter

PART NO. DESCRIPTION

S10074 Code pattern anti-syphon diverter bathcock

CTN/MSTR

1/10

CTN/MSTR

1/12

Add-A-Shower Accessories

36”

FRAME

DIAMETER 3/4”

B60001

10”

S10080

3/4" MIP

PART NO. DESCRIPTION

S10070 Complete unit with S10080 diverter

S10069 Complete unit with S10074 diverter

Complete Add-A-Shower

10”

36”

24”

42”

CTN/MSTR

1/5

1/5

• Rectangular frame

• Aluminum shower rod

• Bathcock with diverter spout

• 3/8” mounting brackets included

• 61” riser with 10” rod and riser support

PART NO. DESCRIPTION

S10068 24” x 42”

Add-A-Shower less Oval Shower Rod

CTN/MSTR

1/5

3/8” IPS

10”

61”

• 61” riser and wall support

• Bathcock with diverter spout

• Chrome plated plastic shower head

• Includes bushings (P11986)

S10081 S10076 S10078 S10082

PART NO. DESCRIPTION

S10075 24” x 42” rectangle shower rod

CTN/MSTR

1/10

B60001 Wall bracket and rod holder with 12” rod (can be cut to fit) 1/100

B60002 Ceiling bracket and rod holder with standard size 36” rod 1/100

S10073 48” ceiling rod only 1/10

S10080

S10081

S10077

S10078

S10082

S10076

Replacement bathcock assembly

Diverter spout only for S10071 (base connection)

1” Wall bracket for S10071

Diverter spout with 65” riser

61” CP brass riser only

61” CP brass riser with shower head

1/12

1/50

1/200

1/10

1/20

1/10

54

3/4" MIP

PART NO. DESCRIPTION

S10072 Complete unit less oval shower rod

CTN/MSTR

1/10

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Kitchen & Bath

Shower Diverter Valve

• Installs between arm and shower head

• Allows usage of hand-held personal shower or shower head

PART NO. DESCRIPTION

S01070 Chrome push button- brass

CTN/MSTR

1/5

Brass Trap Bushing

• Heavy pattern/cast

• 1-1/2” sweat x 1-1/2” IPS

• Knurled end for ease of tightening

• 3/4” length

PART NO. DESCRIPTION

B55150 1-1/2” SWT x 1-1/2” MIP

Twin Elbow and Face Bushings

CTN/MSTR

1/250

Offset Bath Supplies

• Chrome plated

• 1/2” supply tubes

• All hardware needed for connection included

B49020 B49021

PART NO. DESCRIPTION

B49020 Single offset (pair)

B49021 Double offset (pair)

B49022 Replacement nuts, washers and escutcheons

CTN/MSTR

1/25

1/25

1/25

Utility Shower

24”

Overall

Height

21”

Riser

Height

• 21” galvanized riser

• Top or bottom connection

• Chrome plated brass body with shower head and soap dish

• Combination 1/2” threaded or sweat connection union inlets on 3” centers

• Use S10080 for replacement bathcock assembly

PART NO. DESCRIPTION

S10079 Utility shower

CTN/MSTR

1/6

• Brass

D01040 D01041/042

PART NO. DESCRIPTION

D01040 3/4” FIP x 1/2” FIP twin elbow

D01041 3/4” MIP x 1/2” FIP face bushing

D01042 1/2” MIP x 3/8” FIP face bushing

Brass Shower Elbow for Fiberglass

Shower Stall

• Outlet 1/2” FIP

• Secures tub spout nipple

• Secures shower arm to stall

• Lock nuts secure ell to fiberglass wall

• Requires 1-1/8” hole through fiberglass wall

• Combination inlet 1/2” female sweat or 1/2” threaded

PART NO. DESCRIPTION

S01050 Brass elbow

CTN/MSTR

6/144

7” Chrome Plated Diverter Spout

CTN/MSTR

20/100

25/100

25/100

B

Bathcocks for Clawfoot Tubs

• Longer length for today’s larger tubs

• CTS unit comes with hex key

6”

B49001

• Chrome plated brass body

• Replaceable stem and seat

• 3 3/8” centers and 3/4” threaded inlets

B49002

PART NO. DESCRIPTION

B49001 “O” pattern with slip-on spout

B49002 Code pattern with goose neck spout

B49010

B49011

Coupling elbows (pair) chrome plated 3/4” bathcock threads x 1/2” male IPS

Code spout only

B49012 Hot repair kit (handle, stem and seat)

B49013 Cold repair kit (handle, stem and seat)

B49010

CTN/MSTR

1/48

1/48

6/60

10/300

1/100

1/100

PART NO.

D01024

D01025

SIZE

7”

7”

CONNECTION

1/2” FIP Nose

1/2” CTS Slide

CTN/MSTR

1/50

1/25

Chrome Plated Slip-On Diverter Spout with Polished Brass Knob

• Hex key included

• Polished brass knob

• Standard 5 1/2” diverter spout

• 1/2” CTS slip-on connection with set screw

PART NO. DESCRIPTION

D01032 Slip-on diverter spout with PB knob

CTN/MSTR

1/50

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 55

Kitchen & Bath

Chrome Plated Diverter Spouts and Extensions

• Chrome plated Zamak

• D01004 Meets IAPMO and California Energy

Commission approval

• Use P11928 replacement bushing

• Boxed

B

PART NO. DESCRIPTION

D01001 1/2” FIP

D01004 1/2” CTS Slide with hex key

CONNECTION

Nose

Base

CTN/MSTR

• Chrome plated Zamak

• D01002 Meets IAPMO and California Energy

Commission approval

• Use P11928 replacement bushing

• Boxed

1/50

1/50

PART NO. DESCRIPTION

D01002 3/4” x 1/2” FIP

CONNECTION

Base

CTN/MSTR

• Chrome plated brass

• D01002 Meets IAPMO and California Energy

Commission approval

• Use P11928 replacement bushing

• Boxed

1/50

PART NO. DESCRIPTION

D01003 3/4” x 1/2” FIP

CONNECTION CTN/MSTR

Base 1/50

• Chrome plated brass

• 8-1/2” One piece diverter spout

• Boxed

PART NO. DESCRIPTION

D01015 3/4” x 1/2” FIP

CONNECTION

• Chrome plated zamak

• Two piece diverter spout

• Boxed

Base

CTN/MSTR

1/20

PART NO. DESCRIPTION

D01008 8-1/4” two piece

D01009 10-1/8” two piece

Extension Only

CONNECTION CTN/MSTR

1/1

1/1

• Chrome plated brass

PART NO. DESCRIPTION

D01030 3” extension only

D01031 4-3/4” extension only

CTN/MSTR

1/100

1/80

Tub Spouts

8½”

D01020

D01021

• Chrome plated zamak

D01016 D01028

D01029

Chrome Plated Zamak Slide Connection with Hex Key

PART NO. DESCRIPTION

D01020

D01021

1/2” FIP

1/2” CTS slide connection

8 1/2” One Piece Chrome Plated Brass

CONNECTION CTN/MSTR

Nose

Base

1/50

1/50

PART NO. DESCRIPTION

D01016 3/4” x 1/2” FIP

CONNECTION CTN/MSTR

Base 1/20

Two Piece Chrome Plated

PART NO. DESCRIPTION

D01028

D01029

8” two piece

10” two piece

CONNECTION

Nose

Nose

CTN/MSTR

1/1

1/1

Telescoping Tub and Diverter Spout

• 5 1/2” overall length

• Adjustment up to 1” to accommodate various rough-ins

D01022 D01023

PART NO. DESCRIPTION

D01022 1/2” x 3/4” tub spout

D01023 1/2” x 3/4” diverter spout

CONNECTION CTN/MSTR

Base

Base

1/50

1/50

9” Chrome Plated Tub Spout

• Solid brass construction

• One piece design

• 1/2” FIP nose connection

D01017

PART NO. DESCRIPTION

D01017 9” diverter spout

D01018 9” tub spout

D01018

CONNECTION CTN/MSTR

Base

Base

1/12

1/12

7” Chrome Plated Tub Spout

• Longer length for today’s larger tubs

• CTS unit comes with hex key

• Chrome plated Zamak

• Diverter spout for hand held shower

PART NO.

D01026

D01027

Tub Spouts

SIZE

7”

7”

CONNECTION

1/2” FIP Nose

1/2” CTS Slide

CTN/MSTR

1/50

1/25

PART NO. DESCRIPTION

D01010 3/4” x 1/2” FIP top connection

D01011

3/4” x 1/2” MIP lower connection

CONNECTION CTN/MSTR

Base 1/10

Base 1/50 • Solid brass

56

Solid brass

PART NO.

D01005

SIZE

3/4” x 1/2”

CONNECTION

Base

CTN/MSTR

1/40

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Kitchen & Bath

Overflow Plates

1-Hole 2-Hole

PART NO. DESCRIPTION

T05012 1-hole with screw

T05013

T05010

T05011

T05021

2-hole with screws

1-hole less screw

2-hole less screw

1/4” x 2” chrome plated screw

• Chrome plated

• 2” screws

• UPC listed

# OF HOLES

1

2

1

2

CTN/MSTR

20/200

20/200

20/200

20/200

100/1000

Trip Lever With Spring

• Chrome plated

• Coil-type spring

• 2” screws

PART NO. DESCRIPTION

T05002 Round trip lever less screws

T05003

T05021

Round trip lever with 2” screws

1/4” x 2” chrome plated screw

Faceplate Gasket and Shoe Gasket

CTN/MSTR

25/200

25/200

500/2000

Bathtub Protector

• High impact plastic

• Fluted side walls and foam bottom

• MOTOR FREIGHT (LTL) ONLY

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

T10014

T10016

T10216

14” deep x 60” long x 30” wide (steel tubs)

16” deep x 60” long x 42” wide (oval tubs)

16” deep x 60” long x 30” wide (cast iron tubs)

Adapter Bushing for Bath Drain

• Brass bushing

CTN QTY

35

25

35

PART NO. DESCRIPTION CTN/MSTR

T05023 Kohler* bushing 50/200

T05024 1-1/2” MIP x 1-3/8” FIP bushing 50/300

* The manufacturers’ names are used only to describe whose products the products will fit.

Standard Waste and 1-Hole Overflow

• Half kit with chrome plated lift and turn

• 2-hole test kit converts to

1- hole faceplate

B

• CARTON QUANTITIES ONLY

T05025 T05026

PART NO. DESCRIPTION

T05025

T05026

Beveled faceplate gasket 2 1/8” ID x 3 3/16” OD-

9/16”-3/16” thick

Shoe gasket 1 3/4” ID x 2 5/8” OD - 3/32” thick

CTN/MSTR

25/300

25/50

Wraparound Sponge Rubber

Faceplate Gasket

PART NO. DESCRIPTION

B07220T Waste and overflow kit

B07221T Waste and overflow kit

MATERIAL CTN/MSTR

PVC 1/24

ABS 1/24

Standard Waste and 2-Hole Overflow

• Half kit with satin nickel lift and turn

• 2-hole faceplate

• Grips top elbow for easy installation

PART NO. DESCRIPTION

B07114S Waste and overflow kit

B07111S Waste and overflow kit

MATERIAL CTN/MSTR

PVC

ABS

1/24

1/24

PART NO. DESCRIPTION

T05029 Wraparound sponge rubber face gasket

CTN/MSTR

25/500

#15 Plumb Kit

• Stainless steel flange (S01041)

• 1/2” x 6” chrome plated brass shower arm (S01030)

• Chrome plated plastic shower head with brass ball

(S01003)

PART NO. DESCRIPTION

S03220 #15 Plumb kit

CTN/MSTR

1/25

Standard Waste and Overflow

• Full kit with chrome plated friction lift

• Includes bar

• 1-hole faceplate

PART NO. DESCRIPTION

B07219 Waste and overflow kit

#51 Plumb Kit

• Chrome plated flange with set screw (S01040)

• 1/2” x 6” chrome plated brass shower arm (S01030)

• Chrome plated die cast adjustable shower head (S01005)

PART NO. DESCRIPTION

S03222 #51 Plumb kit

CTN/MSTR

1/25

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

MATERIAL CTN/MSTR

PVC 1/10

57

Kitchen & Bath

B

Bath Drains

• Chrome plated

• 2-11/16” OD

• P35061 and P35060 have a zinc body, P35066 is brass

PART NO. DESCRIPTION

P35061

P35060

P35066

1-3/8” (1-5/8” thread OD) lift and turn

1-1/2” ( 1-7/8” thread OD) lift and turn

1-1/2” ( 1-7/8” thread OD) lift and turn

• Chrome plated zinc

CTN/MSTR

1/100

1/100

1/100

Roman Tub Drain

• Solid brass construction

• Screws are included

• U-shaped handle design

• Designed to fit D64 series “Code

Blue” drains

PART NO. DESCRIPTION

D40000 Chrome Plated roman tub drain

D40001 Polished Brass (PVD) roman tub drain

D40002 Satin Nickel (PVD) roman tub drain

CTN/MSTR

1/50

1/50

1/50

Basin and Bath Stopper

• White hollow rubber with rustproof ring

58

PART NO. DESCRIPTION

P35067 1-1/2” friction lift

P35077 1-3/8” friction lift

• Chrome plated zinc

• Includes screw

PART NO. DESCRIPTION

P35064 1-1/2” grid

• Chrome plated zinc

PART NO. DESCRIPTION

P35063

P35062

1-3/8” (1-5/8” OD thread) toe touch

1-1/2” (1-7/8” OD thread) toe touch

CTN/MSTR

1/100

1/100

• Chrome plated

• Replacement cartridge for P35063 and P35062

PART NO. DESCRIPTION

P35056 5/16” toe touch cartridge

P35057 5/16” toe touch cartridge

• 1-3/8” are fine theads

• 1-1/2” are course threads

CTN/MSTR

1/300

1/250

PART NO. DESCRIPTION

T05023 Kohler* bushing

CTN/MSTR

50/300

T05024 1-3/8” female- 1-1/2” male bushing 1/1

* The manufacturers’ names are used only to describe whose products the products will fit.

Quick Cover-Up Tub Stopper

• Chrome plated

• Oversized stopper covers the entire tub drain

• Easily installs without the use of tools

PART NO. DESCRIPTION

P35260 Quick cover-up tub stopper

CTN/MSTR

1/100

1/50

CTN/MSTR

1/100

CTN/MSTR

6/24

PART NO. TRADE SIZE TOP

P35125

P35150

1-1/4”

1-1/2”

1-3/8”

1-5/8”

P35158

P35175

1-5/8”

1-3/4”

1-25/32”

1-55/64”

Fit-All Stopper

Part No.

P35160

P35161

Top Bottom

1-1/2”

3”

7/8”

1-1/2”

BOTTOM

1-3/16”

1-3/8”

1-19/32”

1-11/16”

PART NO. DESCRIPTION

P35160

P35161

1”– 1-3/8” basin stopper

1-1/2”– 2” bath tub or laundry tub stopper

Pop-Up Basin Stopper

CTN/MSTR

100/500

100/500

100/500

100/500

• White rubber construction

CTN/MSTR

100/500

100/500

P36002

• Chrome plated

P36003 P36004

PART NO. DESCRIPTION

P36002 Delta* pop-up basin stopper

P36003 Price-Pfister* pop-up stopper

P36004 Moen* pop-up basin stopper

CTN/MSTR

50/200

10/500

1/200

* The manufacturers’ names are used only to describe whose products the products will fit.

Flip-It Bath Stopper

• One piece construction of Derlin and ABS

• No tools needed for installation

• Open or close with a flip of the toe

• Fits most popular tub drains (assorted o-rings included)

PART NO. DESCRIPTION

P35070 Chrome plated flip-it stopper

CTN/MSTR

100/200

• No bending or stooping necessary to operate

• Open or close with a flip of the toe

• Fits most popular tub drains

PART NO. DESCRIPTION

P35170 Chrome plated flip-it conversion kit

CTN/MSTR

1/25

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Kitchen & Bath

B

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 59

Kitchen & Bath

T-Waste 1-Hole Schedule 40 Bath Waste Kits

B

For use in apartments, motels, hotels - anywhere with back to back baths

T-Waste Kit Benefi ts:

• Direct access to trap from tub

• Direct waste much less likely to clog

• Solvent weld = homogeneous

• Code required for back to back installation

• Never needs access through walls or ceilings

• No access panel needed

• 1-hole faceplate

• Bolt holes on top elbows are pre-threaded

• All drains 3/8” thread size for testing

• UPC listed

Note: Please use suffix”T” when ordering any waste and overflow kit to have test kit included. When a complete kit with a 2-hole test kit is ordered, a 1-hole faceplate with aluminum conversion bar will be supplied.

T-Waste 2-Hole Schedule 40 Bath Waste Kits

For use in apartments, motels, hotels - anywhere with back to back baths

T-Waste Kit Benefi ts:

• Direct access to trap from tub

• Direct waste much less likely to clog

• Solvent weld = homogeneous

• Code required for back to back installation

• Never needs access through walls or ceilings

• No access panel needed

• 2-hole faceplate

• Bolt holes on top elbow are pre-threaded

• All drains 3/8” thread size for testing

• UPC listed

Note: Please use suffix”T” when ordering any waste and overflow kit to have test kit included. When a complete kit with a 2-hole test kit is ordered, a 1-hole faceplate with aluminum conversion bar will be supplied.

Half Kit - Lift and Turn Drain

T-Waste Half Kit- No Pipe Or Elbow

PART NO.

MATERIAL DESCRIPTION

B07038 PVC CP brass lift and turn

B07001

B07005

PVC

PVC

CP lift and turn

PB lift and turn

B07003

B07007

B07040

B07042

B07006

B07039

B07002

B07004

B07008

B07041

B07043

PVC

PVC

PVC

PVC

ABS

ABS

ABS

ABS

ABS

ABS

ABS

CP toe touch

PB toe touch

CP friction lift

PB friction lift

PB lift and turn

CP brass lift and turn

CP lift and turn

CP toe touch

PB toe touch

CP friction lift

PB friction lift

Half Kit - Toe Touch Drain

# HOLES CTN/MSTR

1 1/24

1

1

1/24

1/24

1

1

1

1

1

1

1

1/24

1/24

1/24

1/24

1/24

1/24

1/24

1

1

1

1

1/24

1/24

1/24

1/24

Half Kit - Lift and Turn Drain

T-Waste Half Kit- No Pipe Or Elbow

PART NO.

MATERIAL DESCRIPTION

B07138 PVC CP brass lift and turn

B07101

B07105

PVC

PVC

CP lift and turn

PB lift and turn

B07103

B07107

B07140

B07142

B07139

B07102

B07106

B07104

B07108

B07141

B07143

PVC

PVC

PVC

PVC

ABS

ABS

ABS

ABS

ABS

ABS

ABS

CP toe touch

PB toe touch

CP friction lift

PB friction lift

CP brass lift and turn

CP lift and turn

PB lift and turn

CP toe touch

PB toe touch

CP friction lift

PB friction lift

Half Kit - Toe Touch Drain

# HOLES CTN/MSTR

2 1/24

2

2

1/24

1/24

2

2

2

2

2

2

2

1/24

1/24

1/24

1/24

1/24

1/24

1/24

2

2

2

2

1/24

1/24

1/24

1/24

60

Full Kit - Lift and Turn Drain

T-Waste Full Kit- Includes Pipe and 90° Elbow

PART NO.

MATERIAL DESCRIPTION

B07044 PVC CP brass lift and turn

B07020

B07024

PVC

PVS

CP lift and turn

PB lift and turn

B07022

B07046

B07048

B07045

B07021

B07025

B07023

B07027

B07047

B07049

PVC

PVC

PVC

ABS

ABS

ABS

ABS

ABS

ABS

ABS

CP toe touch

CP friction lift

PB friction lift

CP brass lift and turn

CP lift and turn

PB lift and turn

CP toe touch

PB toe touch

CP friction lift

PB friction lift

Full Kit - Toe Touch Drain

# HOLES CTN/MSTR

1

1

1

1/10

1/10

1/10

1

1

1

1

1

1

1

1

1

1

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

Full Kit - Lift and Turn Drain

T-Waste Full Kit- Includes Pipe and 90° Elbow

PART NO.

MATERIAL DESCRIPTION

B07144 PVC CP brass lift and turn

B07120

B07124

PVC

PVC

CP lift and turn

PB lift and turn

B07122

B07126

B07146

B07148

PVC

PVC

PVC

PVC

CP toe touch

PB toe touch

CP friction lift

PB friction lift

B07121

B07125

B07123

B07127

B07147

B07149

ABS

ABS

ABS

ABS

ABS

ABS

CP lift and turn

PB lift and turn

CP toe touch

PB toe touch

CP friction lift

PB friction lift

Full Kit - Toe Touch Drain

# HOLES CTN/MSTR

2

2

2

1/10

1/10

1/10

2

2

2

2

2

2

2

2

2

2

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Standard 1-Hole Schedule 40 Bath Waste Kits

• 1-hole faceplate

• Bolt holes on top elbows are pre-threaded

• All drains 3/8” thread size for testing

• UPC listed

Note: Please use suffix”T” when ordering any waste and overflow kit to have test kit included. When a complete kit with a 2-hole test kit is ordered, a 1-hole faceplate with aluminum conversion bar will be supplied.

Kitchen & Bath

Standard 2-Hole Schedule 40 Bath Waste Kits

• 2-hole faceplate

• Bolt holes on top elbow are pre-threaded

• All drains 3/8” thread size for testing

• UPC listed

Note: Please use suffix”T” when ordering any waste and overflow kit to have test kit included. When a complete kit with a 2-hole test kit is ordered, a 1-hole faceplate with aluminum conversion bar will be supplied.

B

Half Kit - Lift and Turn Drain

Standard Half Kit- No Pipe or Tee

PART NO.

MATERIAL DESCRIPTION

B07050

B07010

B07014

PVC

PVC

CP brass lift and turn

CP lift and turn

B07012

B07016

PVC

PVC

PVC

PB lift and turn

CP toe touch

PB toe touch

B07052

B07054

B07051

B07011

PVC

PVC

ABS

ABS

CP friction lift

PB friction lift

CP brass lift and turn

CP lift and turn

B07015

B07013

B07017

B07053

B07055

ABS

ABS

ABS

ABS

ABS

PB lift and turn

CP toe touch

PB toe touch

CP friction lift

PB friction lift

Half Kit - Toe Touch Drain

1

1

1

1

1

1

1

1

1

# HOLES CTN/MSTR

1

1

1/24

1/24

1

1

1

1/24

1/24

1/24

1/24

1/24

1/24

1/24

1/24

1/24

1/24

1/24

1/24

Half Kit - Lift and Turn Drain

Standard Half Kit- No Pipe or Tee

PART NO.

MATERIAL DESCRIPTION

B07150

B07110

B07114

PVC CP brass lift and turn

PVC CP lift and turn

B07112

B07116

PVC PB lift and turn

PVC CP toe touch

PVC PB toe touch

B07152

B07154

B07151

B07111

PVC

PVC

ABS

ABS

CP friction lift

PB friction lift

CP brass lift and turn

CP lift and turn

B07115

B07113

B07117

B07153

B07155

ABS PB lift and turn

ABS CP toe touch

ABS PB toe touch

ABS CP friction lift

ABS PB friction lift

Half Kit - Toe Touch Drain

2

2

2

2

2

2

2

2

2

# HOLES CTN/MSTR

2

2

1/24

1/24

2

2

2

1/24

1/24

1/24

1/24

1/24

1/24

1/24

1/24

1/24

1/24

1/24

1/24

Full Kit - Lift and Turn Drain

Standard Full Kit- Includes Pipe and Tee

PART NO.

MATERIAL DESCRIPTION

B07056

B07030

PVC

PVC

CP brass lift and turn

CP lift and turn

B07034

B07032

B07036

B07058

B07060

B07057

B07031

B07035

B07033

B07037

B07059

B07061

PVC

PVC

PVC

PVC

PVC

ABS

ABS

ABS

ABS

ABS

ABS

ABS

PB lift and turn

CP toe touch

PB toe touch

CP friction lift

PB friction lift

CP brass lift and turn

CP lift and turn

PB lift and turn

CP toe touch

PB toe touch

CP friction lift

PB friction lift

Full Kit - Toe Touch Drain

1

1

1

1

1

# HOLES CTN/MSTR

1

1

1/10

1/10

1

1

1

1

1

1

1

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

Full Kit - Lift and Turn Drain

Standard Full Kit- Includes Pipe and Tee

PART NO.

MATERIAL DESCRIPTION

B07156

B07130

PVC

PVC

CP brass lift and turn

CP lift and turn

B07134

B07132

B07136

B07158

B07160

B07157

B07131

B07135

B07133

B07137

B07159

B07161

PVC

PVC

PVC

PVC

PVC

ABS

ABS

ABS

ABS

ABS

ABS

ABS

PB lift and turn

CP toe touch

PB toe touch

CP friction lift

PB friction lift

CP brass lift and turn

CP lift and turn

PB lift and turn

CP toe touch

PB toe touch

CP friction lift

PB friction lift

Full Kit - Toe Touch Drain

2

2

2

2

2

# HOLES CTN/MSTR

2

2

1/10

1/10

2

2

2

2

2

2

2

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 61

Kitchen & Bath

Bath Waste and Overflow Test Kit Trip Lever Conversion Kit

• Chrome plated

• Fits 1-3/8” or 1-1/2” waste elbows

• Includes drain, bushing, faceplate and 2 screws

• Clamshell packaging

B

B07201

B07202

• Drain thread size is 3/8”

PART NO. DESCRIPTION

B07201 1-hole kit without screws or plate

B07202 2-hole kit includes screws and plate

CTN/MSTR

1/200

1/200

PART NO. DESCRIPTION

B51015 Chrome plated trip lever conversion kit

# HOLES CTN/MSTR

2 5/25

Aluminum Bar for Waste and Overflow

• Holds overflow elbow to tub

• Converts 2-hole faceplate to 1-hole faceplate

PART NO. DESCRIPTION

B07200 Aluminum bar with 2 screws

B07203 1-hole overflow faceplate with aluminum bar

CTN/MSTR

1/500

1/1

Bath Waste Conversion Kits

• B51006, B51008, B51011 are

1-1/2” kits

• All others are 1-1/2”x 1-3/8” and include bushings

• Carded for display

Chrome Plated Trim Kits

1-Hole Trim Kit 2-Hole Trim Kit

PART NO.

DESCRIPTION

B07071 Trim kit with lift and turn stopper

B07073 Trim kit with friction lift stopper

B07171 Trim kit with lift and turn stopper

B07173 Trim kit with friction lift stopper

• Chrome plated

• Includes overflow plate, screws and stopper

# HOLES CTN/MSTR

1

1

2

2

1/1

1/1

1/1

1/1

Polished Brass Trim Kit

PART NO. DESCRIPTION

B51005 CP lift and turn kit

B51006 White lift and turn kit

B51007 CP toe touch kit

B51008 CP friction lift kit

B51009 CP lift and turn kit

B51010 CP toe touch kit

B51011 CP friction lift kit

# HOLES CTN/MSTR

2

2

2

1/25

1/25

1/25

1

1

2

1

1/25

1/25

1/25

1/25

Schedule 40 Bath Waste Rough-In Kit

• Chrome plated drain body

• Standard rough-in kit

PART NO. DESCRIPTION

B08071 1-hole faceplate trim kit

• PVD finish

• Includes overflow plate, screws and lift and turn stopper

# HOLES CTN/MSTR

1 1/1

PART NO. MATERIAL DESCRIPTION

B07074 PVC Lift and turn drain body

B07374

B07075

B07375

ABS Lift and turn drain body

PVC Friction lift drain body

B07076

B07376

ABS Friction lift drain body

PVC Lift and turn drain body

ABS Lift and turn drain body

B07077

B07377

PVC Friction lift drain body

ABS Friction lift drain body

# HOLES CTN/MSTR

1 1/1

1

1

1/1

1/1

1

2

2

2

2

1/1

1/1

1/1

1/1

1/1 Conversion Kit with Cross Bar

• 1-3/8” chrome plated zinc drain

• Includes cross bar

• 1-hole faceplate

• Includes bushing for 1-1/2” installation

Schedule 40 Bath Waste Rough-In Kits with Test Kit

62

PART NO. DESCRIPTION

B51019 CP lift and turn conversion kit

B51020 PB lift and turn conversion kit

B07210 CP friction lift conversion kit

Trip Lever Trim Only

• Chrome plated

• 2-hole faceplate

• Includes springs, faceplate, 2 screws and strainer

• Clamshell packaging

PART NO.

DESCRIPTION

B51014 Chrome plated trip lever trim only

CTN/MSTR

6/36

1/12

1/1

# HOLES CTN/MSTR

2 5/25

• Chrome plated drain body

• Standard rough-in kit

• Includes test kit and aluminum bar with screws

PART NO. MATERIAL DESCRIPTION

B07070 PVC Lift and turn drain body

B07470

B07072

ABS

PVC

Lift and turn drain body

Friction lift drain body

B07472

B07170

B07476

B07172

B07477

ABS

PVC

Friction lift drain body

Lift and turn drain body

ABS Lift and turn drain body

PVC Friction lift drain body

ABS Friction lift drain body

# HOLES CTN/MSTR

1 1/1

1

1

1/1

1/1

2

2

2

1

2

1/1

1/1

1/1

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Kitchen & Bath

Plunge Right

• Easily unplug a clogged drain

• Eliminates use of a rag to plug overflow

• Seal allows for full utilization of pressure to remove clog

• Reusable

PART NO. DESCRIPTION

J40016 2-Hole plunge right

J40017 1-Hole plunge right

# HOLES

2

1

CTN/MSTR

1/1

1/1

Grab Bar with Exposed Flange

Satin Finish

• 18 gauge stainless steel

• Meets 900 lb. downward pull when installed properly

• Meets federal specification WW-P-541/8B, Amendment

1, 16 April 1990

• Meets ANSI 117.1 and all ADA Code requirements

• Meets federal specifications for FHA, VA hospital, private construction

• Individually bagged with stainless steel mounting screws

Peened Finish

Satin Finish

PART NO. DESCRIPTION

G12012

G12016

1-1/4” x 12”

1-1/4” x 16”

G12018

G12024

G12030

G12032

G12036

1-1/4” x 18”

1-1/4” x 24”

1-1/4” x 30”

1-1/4” x 32”

G12042

G12048

G13012

G13016

1-1/4” x 36”

1-1/4” x 42”

1-1/4” x 48”

1-1/2” x 12”

1-1/2” x 16”

G13018

G13024

G13030

G13032

G13036

G13042

G13048

1-1/2” x 18”

1-1/2” x 24”

1-1/2” x 30”

1-1/2” x 32”

1-1/2” x 36”

1-1/2” x 42”

1-1/2” x 48”

Peened Finish

PART NO. DESCRIPTION

G12212 1-1/4” x 12”

G12216

G12218

G12224

G12230

1-1/4” x 16”

1-1/4” x 18”

1-1/4” x 24”

1-1/4” x 30”

G12232

G12236

G12242

G12248

G13212

G13216

G13218

1-1/4” x 32”

1-1/4” x 36”

1-1/4” x 42”

1-1/4” x 48”

1-1/2” x 12”

1-1/2” x 16”

1-1/2” x 18”

1-1/2” x 24” G13224

G13230

G13232

G13236

G13242

G13248

1-1/2” x 30”

1-1/2” x 32”

1-1/2” x 36”

1-1/2” x 42”

1-1/2” x 48”

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

FINISH

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

FINISH

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

CTN/MSTR

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

CTN/MSTR

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

PART NO. DESCRIPTION

G12112

G12116

1-1/4” x 12”

1-1/4” x 16”

G12118

G12124

G12130

1-1/4” x 18”

1-1/4” x 24”

1-1/4” x 30”

1-1/4” x 32” G12132

G12136

G12142

G12148

1-1/4” x 36”

1-1/4” x 42”

1-1/4” x 48”

G13112

G13116

G13118

G13124

1-1/2” x 12”

1-1/2” x 16”

1-1/2” x 18”

1-1/2” x 24”

G13130

G13132

1-1/2” x 30”

1-1/2” x 32”

G13136 1-1/2” x 36”

G13142 1-1/2” x 42”

G13148 1-1/2” x 48”

Peened Finish

PART NO. DESCRIPTION

G12312

G12316

1-1/4” x 12”

1-1/4” x 16”

G12318

G12324

G12330

G12332

G12336

G12342

G12348

G13312

G13316

G13318

G13324

G13330

G13332

G13336

G13342

G13348

1-1/4” x 18”

1-1/4” x 24”

1-1/4” x 30”

1-1/4” x 32”

1-1/4” x 36”

1-1/4” x 42”

1-1/4” x 48”

1-1/2” x 12”

1-1/2” x 16”

1-1/2” x 18”

1-1/2” x 24”

1-1/2” x 30”

1-1/2” x 32”

1-1/2” x 36”

1-1/2” x 42”

1-1/2” x 48”

Grab Bar with Concealed Snap-On Flange

Satin Finish

Peened Finish

• 18 gauge stainless steel

• Meets 900 lb. downward pull when installed properly

• Meets federal specification WW-P-541/8B, Amendment

1, 16 April 1990

• Meets ANSI 117.1 and all ADA Code requirements

• Meets federal specifications for FHA, VA hospital, private construction

• Individually bagged with stainless steel mounting screws

Satin Finish

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

FINISH

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

Satin

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

CTN/MSTR

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

Grab Bar Fastening System

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

FINISH

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

Peened

• Made of stainless steel

• Will hold up to 1000 lbs. per grab bar

• Blocking/studs are not required

PART NO. DESCRIPTION

G12999 Commercial grab bar wing It

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

CTN/MSTR

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

1/5

CTN/MSTR

1/60

B

63

Kitchen & Bath

Brass Pop-Up Assembly/Replacement Parts

B

908

909 901 900

902

041

904

906

905

912

913

911

910

907

P35041

• All metal construction

• Tool free locknut and ballrod nut

• 17 gauge

P35902

PART NO. DESCRIPTION

P35001 Chrome-brass

Replacement Parts

PART NO. DESCRIPTION

P35041 1-1/4” mack gasket

P35900 Universal plastic plunger with CP brass cap

P35901 CP stainless steel flange

P35902 Flat rubber washer

P35904 Polyethylene washer

P35905 Brass locknut

P35906 CP brass drain body

P35907 CP brass tailpiece

P35908 Stainless steel lift rod

P35909 Steel clevis with thumb screw

P35910 Stainless steel spring clip

P35911 CP brass ball nut

P35912 CP steel ball rod with plastic all (6-3/8” long)

P35913 Friction washer - under nut (not visible)

CTN/MSTR

1/50

CTN/MSTR

1/500

1/25

16/800

1/25

1/1000

1/25

1/250

1/250

1/500

1/25

1/2000

1/600

1/150

1/600

Brass Lav P.O. Plug Drain

• With chain and stopper

• With overflow

• 17 gauge

PART NO. DESCRIPTION

D70103 1-1/4” P.O. plug drain

Trap Primer Tailpiece

CTN/MSTR

1/50

• Chrome plated 17 gauge tubular

• Sturdy one-piece construction eliminates leaks and crossthreading

• 3/4” compression nut

T74010 T74011

PART NO. DESCRIPTION

T74010 1-1/4” x 8” - threaded top

T74011 1-1/2” x 8” - slip joint top direct connection

CTN/MSTR

1/50

1/50

Lav Lift and Lock Pop-Up Drain

Handicap Style Lav Grid Drain

• Polished chrome plated brass

• Twin 90° construction

• Mack washer and brass locknut

• 17 gauge 1-1/4” tailpiece; cast brass elbows

• With overflow

• UPC listed

PART NO. DESCRIPTION

D70101 Handicap style lav grid drain

D70104

Handicap style lav grid drain with one piece tubular elbow

CTN/MSTR

1/25

1/25

Commercial Handicap Style Lav Grid Drain with Elbow • For vessel sinks

• With 3” drain body and 4-3/4” brass tailpiece

• Tailpiece opening- 1-1/4” OD

P35000 P35003

PART NO. DESCRIPTION

P35000 CP lift and lock pop-up (with overflow holes)

P35003 CP lift and lock pop-up (without overflow holes)

CTN/MSTR

1/50

1/50

• Polished chrome plated brass; cast brass elbow

• 1-1/4” female thread

• Complete with gaskets and brass locknut

PART NO. DESCRIPTION

D70102 Handicap style lav grid drain with elbow

CTN/MSTR

1/48

ABS Lav Pop-Up Assembly Commercial Lav Grid Drain without

Overflow

• Carded

• For vessel sinks

• With 2-1/4” drain body and 6” (5-7/8”) brass tailpiece

• Tailpiece opening- 1-1/4” OD

PART NO. DESCRIPTION

P35004 Grey plastic

CTN/MSTR

1/30

PART NO. DESCRIPTION

D70105 Chrome plated grid drain

CTN/MSTR

1/50

Chrome Plated ABS Lav Pop-Up Assembly

Commercial Lav Grid Drain

• Carded

• Chrome plated brass drain with stainless steel tailpiece

• Mack washer and brass locknut

• 17 gauge 1-1/4” tailpiece; 6” long

64

PART NO. DESCRIPTION

P35005 Chrome plated plastic

CTN/MSTR

1/30

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

PART NO. DESCRIPTION

D70100 Commercial lav drain

CTN/MSTR

1/50

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Kitchen & Bath

Commercial P-Trap with Cleanout

• Chrome plated

• Brass nuts

• 17 gauge semi-cast p-trap

• 17 gauge tubular wall bend

• cUPC listed

PART NO. DESCRIPTION

J37124

J37150

1-1/4” OD with cleanout

1-1/2” OD with cleanout

Chrome Plated PVC P-Trap

CTN/MSTR

1/12

1/12

Air Gap Cover

• Replaces chrome cover on most air gaps

• Blister card packaging

PART NO.

FINISH

A10015 Chrome

Air Gap Spacer

CTN/MSTR

1/1

B

• Complete with nuts, washers and escutcheon

PART NO. DESCRIPTION

P36102 1-1/4” p-trap

P36103 1-1/2” p-trap

CTN/MSTR

1/50

1/50

PART NO. DESCRIPTION

A10901 Air gap spacer

CTN/MSTR

1/25

Flush Valve Pipe Support

• Chrome plated split ring type

• 1-1/2” OD size

• 5” center of pipe to wall

• Mounting hardware included

PART NO. DESCRIPTION

F39800

F39700

1-1/2” x 5” pipe support

1-1/2” x 3 1/2” pipe support

CTN/MSTR

10/50

10/50

Air Gap Dishwasher Kit

• Contains air gap, 24” dishwasher hose (7/8”), and 2 gear clamps

• Poly bagged

PART NO. DESCRIPTION

A10100 Air gap installation pack

A10200 Air gap installation pack-white

A10150

Air gap deluxe pack (includes dishwasher elbow and vacuum breaker)

CTN/MSTR

1/10

1/10

1/10

Tissue Roller

Plumb Aire Air Vent

• Plastic

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

B10195 Fit-All white plastic

CTN/MSTR

50/200

Provent

• Manufactured housing and RV’s only

• Automatic anti-siphon trap vent used as secondary venting

• Must be located at least 60” above trap arm

• Two individually protected fixtures may be connected to same 1-1/2” drain

• Three or more fixtures must be drained by 2” line

• Simply hand tighten, no thread seal needed

• Water closet must have main stack to outside

• Must be installed in accessible location with free flow air

• Do not install in sealed wall cavity

• 1-1/2” MPT threads

PART NO. DESCRIPTION

P21150 1-1/2” Provent

CTN/MSTR

1/200

Adapter

PART NO.

DESCRIPTION

P21100 Plumb Aire vent- 1-1/2”x 2”

P21101 Plumb Aire vent with adapter

P21102

P21103

Plumb Aire vent - 1-1/2”x 2”

Plumb Aire vent with adapter

Adapter for Air Inlet Valve

PART NO.

DESCRIPTION

P21104

P21107

Adapter for air inlet valve

Adapter for air inlet valve

Rosettes

• Up to 160 fixture units

• May be exposed to temperatures ranging from -40° + 150°F

• No protective cover required when installed per code specifications

• Back pressure rated to 20 PSI

MATERIAL CTN/MSTR

PVC

PVC

1/20

1/20

ABS

ABS

1/20

1/20

MATERIAL CTN/MSTR

PVC

ABS

1/20

1/20

Air Gap

• Prevents sewage backflow by breaking siphoning action in drain line

• White polypro body with chrome plated ABS top

• UPC listed

B10110 B10111

PART NO. DESCRIPTION

B10110 Shallow pattern (zinc plated)

B10111 Deep pattern (zinc plated) PART NO. DESCRIPTION

A10001 Air gap

CTN/MSTR

36/72

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

• Install between bottom of counter and faucet nut to spread loads

• CARTON QUANTITIES ONLY

CTN/MSTR

25/5000

25/1000

65

Kitchen & Bath

Basin Cock Locknut Sink Connection Washer

• CARTON QUANTITIES ONLY

B

B10080 B10081

PART NO. DESCRIPTION

B10080 1/2”- 14 hex locknut

B10081 1/2”- 14 flanged hex locknut

• CARTON QUANTITIES ONLY

MATERIAL CTN/MSTR

Zamak 25/1000

Zamak 25/750

Basket Strainer Locknuts and Washers

PART NO. DESCRIPTION

T79000 1-3/4” x 1-3/8” x 1/8” washer

Split Nut

CTN/MSTR

100/1000

• Replace fractured or stripped slip nuts without tubular disassembly

• Supplied with washer

Locknut Rubber Washer

• Die cast zinc

• CARTON QUANTITIES ONLY (Except D02002)

PART NO. DESCRIPTION

B10090 1-1/2” locknut

B10091 2” locknut

B10092 3-3/8” locknut for 4” duo strainer

B10093 3-3/8” heavy pattern locknut for 4” duo strainer

B10094 Basket strainer rubber washer (4-7/16” OD)

D02002

Basket strainer friction washer (4-3/16” OD)

[fiber friction washer]

Friction Washer

CTN/MSTR

25/350

25/350

25/350

25/100

25/300

1/100

PART NO. DESCRIPTION

T82125 1-1/4” split nut

T82150 1-1/2” split nut

Slip Joint Nut

• CARTON QUANTITIES ONLY

CTN/MSTR

100/400

100/400

Ballcock Coupling Nut and Locknut

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

C05080 5/8” x 1/2” 7 threads zinc die cast

C05081 5/8” x 7/8” brass

C05082 15/16”- 14 locknut

CTN/MSTR

25/500

20/400

25/500

PART NO. IPS x SLIP TUBE

T77125 1-1/4” x 1-1/4”

T77138 1-1/2” x 1-3/8”

T77150 1-1/2” x 1-1/2”

T77151 1-1/2” x 1-1/4”

T77152 2” x 1-1/2”

T77200 2” x 2”

T78125 1-1/4” x 1-1/4”

T78150 1-1/2” x 1-1/2”

T78151 1-1/2” x 1-1/4”

T78152 2” x 1-1/2”

T78200 2” x 2”

MATERIAL

Die Cast Zinc

Die Cast Zinc

Die Cast Zinc

Die Cast Zinc

Die Cast Zinc

Die Cast Zinc

Chrome Plated Brass

Chrome Plated Brass

Chrome Plated Brass

Chrome Plated Brass

Chrome Plated Brass

Plastic Slip Joint Nut

PART NO. DESCRIPTION

T83150 1-1/2” slip joint nut with wings

T85125

T85150

1-1/4” x 1-1/4” slip joint nut

1-1/2” x 1-1/2” slip joint nut

• White plastic

• Wings make installation easier

• CARTON QUANTITIES ONLY

(T85125 and T85150)

CTN/MSTR

100/1200

100/1200

100/1200

Rough Brass Slip Joint Nut

• Heavy cast brass

• CARTON QUANTITIES ONLY

Basin Nut

PART NO. IPS x SLIP TUBE

T84125 1-1/4” x 1-1/4”

T84150 1-1/2” x 1-1/2”

T84151 1-1/2” x 1-1/4”

T84200 2” x 2”

MATERIAL

Cast Brass

Cast Brass

Cast Brass

Cast Brass

CTN/MSTR

25/300

25/300

25/300

25/300

• CARTON QUANTITIES ONLY

66

PART NO. DESCRIPTION

B10100 1/2” - 14 x 3/8” basin nut

B10102 1/2” - 14 x 1/2” basin nut

B10103 1/2” - 14 x 9/16” basin nut

B10104 1/2” - 14 x 9/16” basin nut

MATERIAL

Zamak

Zamak

Zamak

Brass

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

CTN/MSTR

25/500

25/500

25/500

10/500

Lavatory Supply Nut

• White

• Wing nut design

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

B10105

1/2” - 14 x 1/2” lavatory nut

MATERIAL

Plastic

CTN/MSTR

25/1100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

25/500

25/800

25/300

25/300

25/300

25/200

200/400

200/400

200/400

125/250

25/250

B

B

Kitchen & Bath

Slip Joint Washer

• CARTON QUANTITIES ONLY

Square Cut Rubber

Square Cut

PART NO.

NUT x TUBE

T79125 1-1/4” x 1-1/4”

T79150

T79151

T79200

T79201

1-1/2” x 1-1/2”

1-1/2” x 1-1/4”

2” x 2”

2” x 1-1/2”

Beveled

PART NO.

NUT x TUBE

T80125

T80135

T80150

T80160

T80151

T80200

1-1/4” x 1-1/4”

1-1/4” x 1-1/4”

1-1/2” x 1-1/2”

1-1/2” x 1-1/2”

1-1/2” x 1-1/4”

2” x 2”

Beveled

MATERIAL

Black Rubber

Black Rubber

Black Rubber

Black Rubber

Black Rubber

MATERIAL

White Poly

Blue TPR

White Poly

Blue TPR

Blue TPR

White Poly

CTN/MSTR

100/5600

100/5600

100/5600

100/2400

100/2400

CTN/MSTR

100/5000

100/5000

100/5000

100/5000

100/5000

100/5000

Slip Joint Nut and Washer

• Chrome plated nut packed with square cut rubber washer

• CARTON QUANTITIES ONLY

Die Cast Nut

Die Cast Nut

PART NO.

DESCRIPTION

T77014

T77012

T77013

T77020

1-1/4” x 1-1/4”

1-1/2” x 1-1/2”

1-1/2” x 1-1/4”

2” x 2”

Brass Nut

PART NO.

DESCRIPTION

T78014

T78012

T78013

T78020

1-1/4” x 1-1/4”

1-1/2” x 1-1/2”

1-1/2” x 1-1/4”

2” x 2”

Brass Nut

Cone Slip Joint Washer

MATERIAL

Die Cast

Die Cast

Die Cast

Die Cast

MATERIAL

Brass

Brass

Brass

Brass

CTN/MSTR

25/500

25/500

25/500

25/500

CTN/MSTR

25/400

25/400

25/400

25/400

T85052 T85053

• Black rubber

• CARTON QUANTITIES ONLY

Brass Friction Rings

• CARTON QUANTITIES ONLY

PART NO.

NUT

T86050 1/2”

T86052

T86053

T86054

T86055

1/2”

Ballcock

Ballcock

Ballcock

TUBE

3/8”

7/16”

1/2”

3/8”

7/16”

OD x ID

21/32” x 25/64”

21/32” x 29/64”

13/16” x 17/32”

13/16” x 25/64”

13/16” x 15/32”

Flanged Tailpiece Washer

• CARTON QUANTITIES ONLY

CTN/MSTR

100/100

100/100

100/100

100/100

100/100

B

PART NO. NUT x TUBE

T81150 1 1/2” x 1 1/2”

T79152 1 1/2” x 1 1/4” cloth inserted

Waste Connector

MATERIAL

Poly

Rubber

CTN/MSTR

100/100

100/100

FIP x SLIP MIP x SLIP

• Brass body ferrule and nut

• MIP units are combination female sweat

FIP x SLIP

PART NO.

T75125

T75150

T75151

T75250

MIP x SLIP

Brass Compression Ring

DESCRIPTION

1-1/4” FIP x 1-1/4” OD

1-1/2” FIP x 1-1/2” OD

1-1/2” FIP x 1-1/4” OD

1-1/2” FIP x 1-1/2” OD with poly washer

CTN/MSTR

12/72

12/72

12/72

12/72

PART NO.

T76125

T76150

T76151

T76250

PART NO.

T75000

T75001

DESCRIPTION

1-1/4” MIP x 1-1/4” OD

1-1/2” MIP x 1-1/2” OD

1-1/2” MIP x 1-1/4” OD

1-1/2” MIP x 1-1/2” OD with poly washer

Brass Compression Ring

DESCRIPTION

1-1/4” OD

1-1/2” OD

CTN/MSTR

12/72

12/72

12/72

12/72

CTN/MSTR

1/1000

1/1000

Double Slip Fittings

T85054

PART NO.

T85050

T85051

T85052

NUT

1/2”

1/2”

1/2”

T85053 Ballcock supply

T85054 Ballcock supply

T85055 Upper bath supply

T85055

TUBE

3/8”

3/8” threaded

7/16” or 1/2”

-

-

-

OD x ID

23/32” x 3/8”

23/32” x 3/8”

5/8” x 7/16”

3/4” x 7/16”

13/16” x 11/32”

27/32” x 7/16”

CTN/MSTR

100/1600

100/1600

100/1600

100/1600

100/1600

100/1600

Coupling

• Chrome plated brass

• 22 gauge

PART NO. DESCRIPTION

T74001 1-1/4” coupling

T74002

T74003

1-1/2” coupling

1-1/4” 90° elbow

T74004

T74005

T74006

1-1/2” 90° elbow

1-1/4” 45° elbow

1-1/2” 45° elbow

90° Elbow

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

45° Ellbow

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

10/100

67

Kitchen & Bath

68

Slip Joint Tee

• Chrome plated satin finish cast brass

• Compression ends

B

PART NO. DESCRIPTION

C74105 1-1/2” x 1-1/2” x 1-1/2” tee

90° Drop Ear Elbow

CTN/MSTR

10/60

• Cast brass

• Lead free

PART NO. DESCRIPTION

B55100LF 1/2” FIP x 1/2” FIP elbow

B55101LF 1/2” FIP x 1/2” CPVC elbow

B55103LF 1/2” FSWT x 1/2” FSWT elbow

B55050 1/2” FIP x 1/2” FSWT elbow

CTN/MSTR

45/180

45/180

1/100

60/240

Sweat Male Adapter and Marvel Adapter

Sweat Male Adapter

Sweat Male Adapter

PART NO.

B55001

B55002

B55003

Marvel Adapter

PART NO.

B55004

B55005

B55006

B55007

B55008

B55009

Marvel Adapter

FSWT x MIP

1/2” x 1/2”

3/4” x 3/4”

1” SJ x 1” SWT

FSWT x MIP

1 1/4” SJ x 1 1/4” SWT

1 1/2” SJ x 1 1/2” SWT

2” SJ x 2” SWT

1 1/2” SJ x 1 1/4” SWT

1 1/2” SJ x 1 1/2” Tubular

1 1/4” SJ x 1 1/4” Tubular

• Use on tub spout elbow or closet/ urinal stub out adapter

• Brass

CTN/MSTR

1/1000

1/1000

1/1000

CTN/MSTR

1/1000

1/500

1/500

1/500

1/500

1/500

Assorted Washer Kit

PART NO. DESCRIPTION

J40150 Beveled washer kit

J40151 Flat washer kit - assorted colors

• 210 pieces packaged in reusable plastic case

• Available with flat or beveled washers

• Contains: 40-00, 40-0, 40-1/4, 30-

1/4 large, 20-3/8, 20-3/8 medium,

10-3/8 large, 10-1/2 large

CTN/MSTR

12/24

12/24

O-Ring Kit and Pick

O25199

O25200

• Packed in resealable plastic case with fitting chart on lid

• Manufactured from nitrile compound

PART NO. DESCRIPTION

O25200 200 pc plumbers pack

ORA225 225 pc plumbers pack

O25199 O-ring pick

CTN/MSTR

12/24

1/24

1/25

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Solid Brass Bibb Screw Assortment Kit

• 208 pieces packaged in reusable plastic case

• Contains: 3/8” x 6-32, 1/2” x 6-32, 3/8” x

8-32, 1/2” x 8-32, 3/8” x 10-24, 1/2” x 6-24,

3/8” x 10-32, 1/2” x 10-32

PART NO. DESCRIPTION

J40153 Bibb screw assortment

B40004 B40005

B40012 B40015

B40006 B40007

B40021 B40025

CTN/MSTR

10/40

Faucet Seat Kit

• Reusable compartment box with seat guide on inside cover

• Contains all 36 seats

• Made in the USA

PART NO. DESCRIPTION

B40000 144-piece faucet seat kit (36 different parts)

CTN/MSTR

1/4

Faucet Seats

B40002

B40020

B40011

B40026

• All brass

• Made in the USA

B40027 B40028 B40030 B40032

PART NO. FITS BRAND/SIZE

B40001 Speakman* 9/16” x 28 x 3/8”

B40003 Speakman* 7/16” x 27 x 11/32”

B40002 American Standard* 7/16” x 24 x 13/32”

B40004 American Standard* 9/16” x 24” x 3/8”

B40012 American Standard* 1/2” x 20 x 3/8”

B40013 American Standard* 1/2” x 20 x 7/16”

B40021 American Standard* 9/16” x 18 x 3/8”

B40005 Price Pfister* 1/2” x 20” x 3/8”

B40006 Price Pfister* .65” x 18 x 3/8”

B40007 Briggs*, Republic* 1/2” x 24 x 7/16”

B40008 Briggs*, Republic* 9/16” x 20 x 3/8”

B40023 Briggs* 5/8” x 20 x 13/16”

B40035 Briggs*, Republic* 5/8” x 24 x 7/16”

B40009 Repal* 9/16” x 28 x 11/32”

B40010 Eljer* 1/2” x 27 x 1/2”

B40026 Eljer* 1/2” x 20 x 3/8”

B40011 Kohler* 1/2” x 27 x 3/8”

B40028 Kohler* 1/2” x 27 x .318”

B40027 Kohler* Push-In x .348”

B40014 Central Brass* 9/16” x 27 x 13/32”

B40018 Central Brass* 1/2” x 24 x .418”

B40019 Central Brass* 5/8” x 24 x 23/32”

B40015 Sterling* 1/2” x 24 x 3/8”

B40017 Universal* 17/32” x 24 x 3/8”

B40020 Gerber* 5/8” x 20 x 27/64”

B40024 Dick Brothers* 1/2” x 27 x 13/32”

B40025 Indiana Brass* 1/2” x 27 x 13/32”

B40034 Indiana Brass* 9/16” x 27 x 5/8”

B40030 Union Brass* 5/8” x 18 x 5/16”

B40033 Union Brass* 5/8” x 18 x 29/32”

B40032 Sayco* 1/2” x 20 x 5/16”

B40036 Steamway* 1/2” x 24 x 11/32” 1/100

* The manufacturers’ names are used only to describe whose products the products will fit.

CTN/MSTR

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Kitchen & Bath

Faucet Hole Cover Rinse-Quik Hose and Spray

• Stainless steel

• CARTON QUANTITIES ONLY

B10201 B10200

PART NO. DESCRIPTION

B10201 1-3/4” OD with washer

B10202 2” OD with washer

B10200 1-1/2” snap-in

Long Reach Bar Tap Faucet

• 1/4” connection

• 10” meets NSF 61.9

• Can be used with reverse osmosis

• Lead free

CTN/MSTR

25/500

25/500

25/1200

PART NO. DESCRIPTION

B45014 Long reach bar tap faucet

Bar Tap Faucet

• Chrome plated brass

• Meets NSF standard 61.9

• 1/4” compression inlet connection

• Kit includes: stem, spring, 2 “o” rings and black handle

• Lead Free

• Individually bagged

PART NO. DESCRIPTION

B45010 1/4” connection

CTN/MSTR

1/36

Delta* Style Spray Assembly

CTN/MSTR

5/50

• Individually boxed

• Made in the USA

Complete Spray Head Assembly Spray Head Pet Sprayer

PART NO. DESCRIPTION RQ # CTN/MSTR

K53001 Black complete spray assembly

K53005 White complete spray assembly

Black spray assembly with 1/4” female swivel

K53006 nut to fit Delta* faucet

K53002 Black spray head only w/ chrome ring

K53003 4’ hose only

K53004 Hose guide

K53007 Replacement hose for Delta*

K53008 White spray head only w/ chrome ring

K53056 Black spray head with black ring

K53057 White spray head assembly

(MR4224)

(MR-4224WH)

(MR422-4C)

(MR4-22)

(MR-4)

(MR-200)

(MR4C)

1/50

1/50

1/50

1/100

1/50

1/10

1/100

(MR422WH) 1/100

(MR427) 1/100

(MR4274WH) 1/100

K53058 White spray head with white ring

K53055 Black spray head assembly

K53077 Black spray head assembly with 6’ hose

K53060 Pet sprayer (off-white)

(MR427WH)

(MR42474)

-

(MR421)

1/100

* The manufacturers’ names are used only to describe whose products the products will fit.

1/1

1/1

1/1

B

Chrome Plated Soap and Lotion Dispenser

• 2” spout

• All brass pump

• 7 ounce poly bottle

• 4’ hose and 1/4” female swivel nut

• Replaces Delta* style thumb- controlled sink sprays and hoses

PART NO. DESCRIPTION

S08020 Chrome plated dispenser

Sink Lugs

CTN/MSTR

1/50

K55006 K55007

PART NO. DESCRIPTION CTN/MSTR

K55006 Spray assembly

K55007 Replacement hose only

* The manufacturers’ names are used only to describe whose products the products will fit.

1/50

1/50

S58050 S58052

• Four lugs bagged with screws

• Priced per bag

Kitchen Hose and Spray (Fit All)

• Reinforced hose with universal coupling adapter

• Automatic off

• Replacement for thumb controlled sink spray

• Individually boxed for display

K52001 K52002

S58051 S58053

PART NO. DESCRIPTION

S58050 Combo clip for counters 5/8”- 1-1/8” thick

S58052

S58051

S58053

E-lug for counters 3/8”- 1/2” thick

Adjustable clips for counters 3/4”- 2-3/4” thick

KT lug with bolt

CTN/MSTR

1/100

1/100

1/100

1/100

Undermount Sink Installation Kit

• Includes 4 each brackets, brass inserts, washers, bolts and wing nuts

• Priced per bag

PART NO. DESCRIPTION

S58101 Undermount kit

CTN/MSTR

50/100 K52004 K52010

PART NO. DESCRIPTION

K52001 Head only

K52002 Head, hose and adapter

K52003 4’ hose and adapter

K52004 Hose guide

K52010 White hose and spray

K52005 White head only

CTN/MSTR

1/200

1/50

1/100

1/500

1/100

50/200

Lavatory Legs

• Chrome plated

• Fits vitreous china, steel or cast iron lavatories

• Total length ranges from 31-1/2” to 32-3/4” extended

• Can be cut

• Priced per pair

PART NO. DESCRIPTION

L65001 27” legs

CTN/MSTR

1/20

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 69

Kitchen & Bath

Lavatory and Sink Hangers Snap Lock Basket Strainer

• All stainless steel

• 4-1/2” diameter to fit 3-1/2” drilling

• Ball bearing basket with rolled edge (less tailpiece)

• Wall mount

B

L56020 L56026

L56023 L56024

PART NO. DESCRIPTION

L56020 Cast iron (for cast iron or vitreous china)

L56026

L56023

L56024

Pair cast iron hangers (for cast iron or vitreous china)

Steel 10” centers (one piece)

7” stamped steel lavatory hanger

CTN/MSTR

1/24

1/12

50/100

50/25

Adjustable Lavatory Hanger

• Durable cast iron

• Adjusts from 10-1/2” to 16”

• For iron, lugs fit into pockets

• For china, remove side lugs

PART NO. DESCRIPTION

L56027 Lav hanger

CTN/MSTR

1/14

Economy Replacement Basket Strainer

PART NO. DESCRIPTION

S14005 Snap lock basket strainer with zinc locknut

S14010 Snap lock basket strainer with brass locknut

Shallow Cup Duo Basket Strainer

• 4-1/2” diameter to fit 3-1/2” drilling

• All stainless steel with zinc locknut

• Basket with rolled edge (less tailpiece)

• UPC listed

PART NO. DESCRIPTION

S14006 Shallow cup duo strainer

Chrome Plated Brass Duo Strainer

CTN/MSTR

1/50

1/50

CTN/MSTR

1/50

70

• ABS post

• Stainless steel basket

PART NO. DESCRIPTION

B03015 Replacement basket

Fit-All Basket Strainer

• Stainless steel

• Rubber stopper

CTN/MSTR

1/200

PART NO. DESCRIPTION

B03010 Fit-All strainer

Duo Basket Strainer

• All stainless steel with zinc locknut

• 4-1/2” diameter to fit 3-1/2” drilling

• Basket with rolled edge

• UPC listed

PART NO. DESCRIPTION

S14001 SS duo strainer

CTN/MSTR

1/200

CTN/MSTR

1/50

Flat Top Grid Strainer

• All stainless steel with zinc locknut (less tailpiece)

• 4-1/2” diameter to fit 3-1/2” drilling

• UPC listed

PART NO. DESCRIPTION

S14002 Flat grid strainer

CTN/MSTR

1/24

PART NO. DESCRIPTION

S14007 CP brass duo strainer

S14011 Replacement strainer

Twist and Lock Basket Strainer

• All stainless steel with zinc locknut

• 4-1/2” diameter to fit 3-1/2” drilling

• Screw-in basket (less tailpiece)

• UPC listed

PART NO. DESCRIPTION

S14003 Twist and lock basket strainer

S14103 Twist and lock replacement basket

Deep Cup Basket Strainer

• All stainless steel with zinc locknut

• 4-1/2” diameter to fit 3-1/2” drilling

• Basket with rolled edge (less tailpiece)

• UPC listed

CTN/MSTR

1/25

1/150

CTN/MSTR

1/24

1/200

PART NO. DESCRIPTION

S14004 Deep cup basket strainer

CTN/MSTR

1/24

Quick Fit Stainless Steel Basket Strainer

• Durable stainless construction with brass nut

• Minimizes installation time

• Triangle frame mounts to underside

• Fits virtually all sinks

• For replacement basket use B03015

• UPC listed

PART NO. DESCRIPTION

S14008 Quick fit basket strainer

CTN/MSTR

1/50

Chrome Plated ASAP Basket Strainer

• Durable stainless construction with brass slip nut

• Ideal for quick installation

• Can be installed in less than one minute

• Galvanized retaining ring

• Galvanized locking ring

PART NO. DESCRIPTION

S14009 ASAP basket strainer

CTN/MSTR

1/24

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Kitchen & Bath

Chrome Plated Brass Duo Basket Strainer

• Chrome plated brass body with stainless

steel basket

• Heavy duty construction

• Neoprene stopper

• UPC listed

PART NO. DESCRIPTION

S14250 CP brass duo basket strainer

CTN/MSTR

1/24

Stainless Steel Duo Basket Strainer

• Stainless steel body and basket

• Chrome plated zinc post and slip nut

• Polished inner cup

• Heavy duty rubber gasket and zinc locknut

• UPC listed

PART NO. DESCRIPTION

S14251 SS duo post style basket strainer

CTN/MSTR

1/50

Stainless Steel Basket Strainer

• Stainless steel body and locknut

• Neoprene stopper

• Spring style snap-in basket

• Compares to DB 14

• UPC listed

PART NO. DESCRIPTION

S14014 SS cup basket strainer

CTN/MSTR

1/50

Stainless Steel Duo Basket Strainer

• Stainless steel body and locknut

• Neoprene stopper

• Spring style snap-in basket

• UPC listed

PART NO. DESCRIPTION

S14606 SS duo basket strainer

CTN/MSTR

1/50

ABS Body and Post Basket Strainer

• Plastic nut

Flat Duplex Strainer

• Stainless steel body and strainer with die cast locknut

• Complete with washers

• Fits 1-3/4” bar sink

PART NO. DESCRIPTION

B02052 Flat duplex strainer

Cast Brass Beehive Urinal Strainer

• Chrome plated brass strainer and body

• Brass locknut

• 2” caulk connection

PART NO. DESCRIPTION

D45000 Cast brass beehive urinal strainer

D45001 Replacement top with screws for D45000

Flexible Hair Strainer

PART NO. DESCRIPTION

P35180 Flexible hair strainer

1” Brass Bar Plug

• Cast brass

• Includes ground seat plug

CTN/MSTR

1/100

CTN/MSTR

1/30

1/100

• Soft rubber flexible strainer fits neatly over drain

CTN/MSTR

1/1000

B

PART NO. DESCRIPTION

B02060 1” x 3” bar plug

CTN/MSTR

1/50

Tray Plug

PART NO. DESCRIPTION

S14030 ABS body and post basket strainer

CTN/MSTR

1/50

Deep Junior Duo Basket Strainer

• For 2” and 2-1/2” deep outlets and bar sinks

• Stainless steel body with die cast locknut

• Fits 1-1/2” bar sink

• Complete with washers and stoppers

PART NO. DESCRIPTION

B02051 Tray plug

CTN/MSTR

1/100

B02102 B02103

PART NO. DESCRIPTION

B02102 2” deep basket strainer

B02103 Replacement strainer

CTN/MSTR

1/100

1/250

Junior Duo Basket Strainer

• Stainless steel body and basket with die cast locknut; 1-1/2” threads

• Complete with washers

• Fits 1-3/4” bar sink

B02050 B02049

PART NO. DESCRIPTION

B02050 Junior duo strainer

B02049 Replacement basket

CTN/MSTR

1/100

100/500

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Rubber Hush Cushion

• Black

• Fits In-Sink-Erator

PART NO. DESCRIPTION

P35159 Rubber hush cushion

Kitchen Sink and Garbage Disposal Stopper

• Vinyl construction

• Flanged to fit all sizes

PART NO. DESCRIPTION

P35162 Sink stopper

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

1/500

CTN/MSTR

1/50

71

Kitchen & Bath

Garbage Disposal Splash Guard

• Rubber

• Snap-fit reinforced ring

• Fits all disposal brands

PART NO. DESCRIPTION

P35163 Rubber fit-all splash guard

B

Three Prong Drain Protector

• Stainless steel

PART NO. DESCRIPTION

D18062 1 5/8” drain protector

D18063 1 7/8” drain protector

Sink and Basin Crumb Cup

• Stainless steel

PART NO. DESCRIPTION

P35165 1 1/2” crumb cup with post

P35166

P35167

1” crumb cup

1 3/8” crumb cup

Slotted Full Flow Aerators

CTN/MSTR

1/200

CTN QTY

1/2500

1/500

Non-Slotted Reduced Flow Aerators

Male Thread

• Meets ANSI A-112.18M

• Individually bagged

• Lead free

Female Thread Dual Thread

PART NO. DESCRIPTION CTN/MSTR

A01011 15/16”-27 male thread 2.2 GPM

A01012 55/64”-27 female thread 2.2 GPM

25/600

25/600

A01013 Dual threads 2.2 GPM (15/16”-27 male x 55/64”-27 female) 25/600

A01050 Dual threads 2.0 GPM (15/16”-27 male x 55/64”- 27 female) 25/600

A01051 Dual threads 1.5 GPM (15/16”-27 male x 55/64”- 27 female) 25/600

Non-Slotted Reduced Flow Aerator

• 0.5 GPM

• Individually bagged

• Lead free

CTN/MSTR

1/500

1/1000

1/160

PART NO. DESCRIPTION

A01037 Dual thread (15/16”-27 male x 55/64”-27 female)

Chicago Style Faucet Aerator

• Individually bagged

• Lead free

CTN/MSTR

25/600

Male Thread

• Chrome plated brass

• Non-corrosive mixing chamber

• 4.5 GPM

• Individually bagged

• Lead free

Female Thread

PART NO. DESCRIPTION

A01001 15/16”-27 male thread

A01002 55/64”-27 female thread

A01003 Dual threads (15/16”-27 male x 55/64”-27 female)

Slotted Reduced Flow Aerator

• NSF listed santoprene washer

• 2.2 GPM

• Meets ANSI A-112.18M

• Individually bagged

• Lead free

PART NO. DESCRIPTION

A01004 Dual threads (15/16”-27 male x 55/64”-27 female)

Non-Slotted Full Flow Aerators

Dual Thread

CTN/MSTR

25/600

25/600

25/2000

CTN/MSTR

25/600

PART NO. DESCRIPTION

A01062 Non-slotted full flow (55/64”-27 female thread)

Aerator Six Pack Tubes

PART NO. DESCRIPTION

A01020 Slotted full flow (A01003)

A01021 Slotted 2.2 GPM (A01004)

A01022 Non-slotted full flow (A01010)

A01023 Non-slotted 2.2 GPM (A01013)

A01061 Non-slotted 2.0 GPM (A01050)

Aerator Counter Display

CTN/MSTR

1/600

• Dual threads are 15/16”-27 male x

55/64”-27 female

• Six aerators per tube

• Priced per tube

• Lead free

CTN/MSTR

Tube of 6/200

Tube of 6/200

Tube of 6/200

Tube of 6/200

Tube of 6/200

72

Male Thread

• 4.5 GPM

• Individually bagged

• Lead free

Female Thread

PART NO. DESCRIPTION

A01005 15/16”-27 male thread

A01006 55/64”-27 female thread

A01007 13/16”-27 male thread

A01008 3/4”-27 female thread

A01010 Dual threads (15/16”-27 male x 55/64”-27 female)

Dual Thread

CTN/MSTR

25/600

25/600

25/600

25/600

25/600

• Dual threads are 15/16”-27 male x 55/64”-27 female

• 24 tubes per display box, six aerators per tube

• 144 pieces per display; priced per display

• Lead free

PART NO. DESCRIPTION

A01015 Slotted full flow with dual threads 4.5 GPM (A01003)

A01016 Slotted reduced flow with dual threads 2.2 GPM (A01004)

A01017 Non-slotted full flow with dual threads 4.5 GPM (A01010)

A01018 Non-slotted with dual threads 2.2 GPM (A01013)

A01060 Non-slotted with dual threads 2.0 GPM (A01050)

CTN/MSTR

1/5

1/5

1/5

1/5

1/5

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

B

B

Kitchen & Bath

Spring-Flo Faucet Aerator

• Dual thread

• Fully compliant with California AB1953 and Vermont S152

• Lead free

PART NO. DESCRIPTION

A01900 Slotted 2.2 GPM Spring-Flo display

A01901 Slotted 2.2 GPM Spring-Flo

Snap Fitting

• Aerated

• 2.5 GPM

CTN/MSTR

1/1

Tube of 6/24

Faucet Adapters

A01030 A01032

• These parts are not OEM

A01029 A01036

PART NO. DESCRIPTION

A01029

Dual thread (15/16”-27 male x 55/64”-27 female x aerated snap fitting)

A01036

Nonplated brass snap coupler x 3/4” GHT for use with

A01029 as a quick-disconnect unit

CTN/MSTR

1/300

1/300

Swivel Spray Aerator

• Brass coupling nut

• Unit reverts to non-splash mode when water is turned off

• 2.2 GPM; 60 PSI

• Individually bagged

PART NO. DESCRIPTION

A01014 Dual thread (15/16”-27 male x 55/64”-27 female)

Vandal-Proof Aerators

CTN/MSTR

36/72

• Special key wrench included

• Prevents unauthorized removal

A01033 A01035

To Fit Delta*, American Standard* Style

PART NO. DESCRIPTION

A01030 CP brass 15/16”-27 male x 55/64”-27 male threads

A01031 Plastic 15/16”-27 male x 55/64”-27 male threads

To Fit Price Pfister*, Kohler* Style

PART NO. DESCRIPTION

A01032 CP brass female 3/4”-27 x 55/64”-27 male threads

To Fit Kohler*, Union*, Savoy* Style

PART NO. DESCRIPTION

A01033

A01034

CP brass male 13/16”-27 x 55/64”-27 male threads

Plastic male 13/16”-27 x 55/64”-27 male threads

CTN/MSTR

1/25

1/300

CTN/MSTR

1/300

CTN/MSTR

1/300

1/500

To Fit Chicago* Style

PART NO. DESCRIPTION CTN/MSTR

A01035 CP brass female 13/16”-24 x 55/64”-27 male threads 1/500

* The manufacturers’ names are used only to describe whose products the products will fit.

B

Fit-All Replacement Handles

Cross Pattern Lever Pattern

• Vise grip design allows units to fit all types of stems, including rounded

• Each pair individually bagged

Acrylic

PART NO. DESCRIPTION

H54001 Cross pattern handles

H54002 Lever pattern handles

H54003 Acrylic handles

CTN/MSTR

5/100

5/100

5/100

Male Female

PART NO. DESCRIPTION

A01024 15/16”-27 male full flow

A01026 15/16”-27 male 2.0 GPM

A01027 55/64”-27 female 2.0 GPM

Faucet to Garden Hose Adapters

• Chrome plated brass

• Lead free

CTN/MSTR

1/600

1/600

1/25

PART NO. DESCRIPTION

A01040

A01041

Dual threads 15/16”-27 male x 55/64”- 27 female x

3/4” MGH

Dual threads 15/16”-27 male x 55/64”- 27 female x

3/4” MGH and 55/64”-27 male

CTN/MSTR

1/600

1/600

PART NO.

C384

C382

DESCRIPTION

Chrome Plated hot & cold handles for compression tub/shower faucets (Pair)

Chrome Plated diverter handle for tub/shower faucet

CTN/MSTR

6/72

6/72

C406 Chrome Plated H & C handles for heavy tub/shower (Pair) 6/72

C406A Chrome Plated diverter handle for heavy tub/shower 6/72

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 73

Kitchen & Bath

Delta*/Peerless* Replacement Handles

B

H54010

• Includes button and screw

H54011 H54012

PART NO. DESCRIPTION

H54010 Single lever crystal handle for all lav faucets using 212* ball

CTN/MSTR

1/5

H54011

Single lever crystal handle offset broach for tub and shower valves using 212* ball

1/5

H54012 Single lever crystal tub handle for Scald Guard*

* The manufacturers’ names are used only to describe whose products the products will fit.

1/5

H54013 H54014 H54015

• Includes button and screws

PART NO. DESCRIPTION

H54013 Two chrome plated canopy handles for center set

H54014 Two crystal handles for center set new style

H54015

Two crystal handles for wide spread lav and tub and shower valves

CTN/MSTR

1/5

1/5

1/5

* The manufacturers’ names are used only to describe whose products the products will fit.

Mixet* Replacement Handles

• Includes screw

H54017

H54018

PART NO. DESCRIPTION

H54017 Clear outer handle (MRH-CLR*)

CTN/MSTR

1/5

H54018 Clear inner handle (MTH-CLR*)

* The manufacturers’ names are used only to describe whose products the products will fit.

1/5

Valley*/Aqualine*/Eljer*/Sears*

Replacement Handles

• New style crystal handle

• Complete with button and screw

PART NO. DESCRIPTION CTN/MSTR

H54030 Crystal single handle

* The manufacturers’ names are used only to describe whose products the products will fit.

1/5

Moen*/Stanadyne* Replacement Handles

Delta*/Peerless* Faucet Index Buttons

• Single handle models

H54040 H54041

PART NO. DESCRIPTION CTN/MSTR

H54040

H54041

Old style crystal button for lav and tub and shower valve 1” OD

New large style crystal button for lav and tub and shower valve 1-1/2” OD

5/35

5/35

* The manufacturers’ names are used only to describe whose products the products will fit.

Moen*/Stanadyne* Single Handle

Replacement Buttons

H54060 H54061

PART NO. DESCRIPTION CTN/MSTR

H54060 Button for new style Teardrop* crystal handle

H54061 Button for round crystal handle lav and tub and shower valve

* The manufacturers’ names are used only to describe whose products the products will fit.

1/5

1/5

Replacement Handles for Lavatory and

Kitchen Faucets

PART NO. DESCRIPTION

660001

660011

660041

660042

660071

660081

Chrome Plated handles for kitchen and bathroom faucets (Pair) 1/25

Satin Nickel handles for kitchen and bathroom faucets (Pair) 1/25

Chrome Plated single handle for bathroom faucet 1/25

Satin Nickel single handle for bathroom faucet

Chrome Plated single handle for kitchen faucet

Satin Nickel single handle for kitchen faucet

CTN/MSTR

1/25

1/25

1/25

Ceramic Cartridge for Kitchen Faucets

H54025 H54026 H54027

74

H54028 H54029

• Complete with button and screw

• Teardrop* replaces both round and Teardrop* handles

PART NO. DESCRIPTION CTN/MSTR

H54025 Crystal Teardrop* single lav handle shallow broach

H54026 Crystal Teardrop* single tub handle deep broach

H54027 Round crystal single lav handle shallow broach

H54028 Round crystal single tub handle deep broach

1/5

1/5

1/5

H54029

Chrome plated cap and cover for single handle kitchen faucet

* The manufacturers’ names are used only to describe whose products the products will fit.

1/5

1/5

• Plastic square-broached stem

• Stem is internally threaded for handle screw

• Marked “DL02GJ”

• Fits 1558040, 1558060, 1558061, 1558070,

1558071, 1558072, 1558020, and 1558021

PART NO. DESCRIPTION

660143 Replacement cartridge for kitchen

CTN/MSTR

1/25

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

B

B

Kitchen & Bath

Ceramic Cartridge for Tub/Shower Faucets Sure Grip Escutcheons

• Plastic square-broached stem

• Adjustable lock-nut reinforcer

• Stem is internally threaded for handle screw

• Scald guard pressure balanced

• Marked “HJ-40”

• Fits 1550221 and 1550222

PART NO. DESCRIPTION

1550223 Replacement cartridge for tub/shower

Poly Bagged Escutcheons

• Chrome plated steel

• 50 per bag

• CARTON QUANTITIES ONLY

CTN/MSTR

1/50

Stem and Seats for Two Handle Faucets

• Also fits some Glacier Bay®, Premier®, and

ProPlus® faucets

PART NO.

C1742C

DESCRIPTION

Stem and seat for two handle - Cold

CTN/MSTR

4/48

C1742H Stem and seat for two handle - Hot 4/48

* The manufacturers’ names are used only to describe whose products the products will fit.

Replacement Handles for Classic Faucets

• Stems come together with seats

PART NO.

C1807A

C1809A

C1756C

C1756H

C1754CH

C1744D

DESCRIPTION

Stainless steel ball for single handle kitchen faucet 6/144

Stainless steel ball for single handle bathroom faucet 6/144

Cold stem for heavy kitchen and bathroom faucet 4/48

Hot stem for heavy kitchen and bathroom faucet

Stem for compression tub/shower faucet

C1757CH Stem for heavy tub/shower faucet

C1759D Diverter stem for compression tub/shower faucet

Diverter stem for heavy tub/shower faucet

CTN/MSTR

4/48

4/48

4/48

4/48

4/48

C1740CH Stem, seat, and spring for washerless faucet 4/48

PART NO. DESCRIPTION

E01049 1/2” CTS (5/8” O.D.)

E01074 3/4” CTS (7/8” O.D.)

CTN/MSTR

50/2000

50/2000

Low Pattern

• Chrome plated steel

• CARTON QUANTITIES ONLY

Low-Pattern- Copper Tube Size

Box Pattern

PART NO.

E01375

E01050

E01075

E01100

E01125

E01150

Low-Pattern- Iron Pipe Size

SIZE

3/8” CTS (1/2” OD)

1/2” CTS (5/8” OD)

3/4” CTS ( 7/8” OD)

1” CTS (1-1/8” OD)

1-1/4” CTS (1-3/8” OD)

1-1/2” CTS (1-5/8” OD)

PART NO.

E02375

E02050

E02075

E02100

E02125

E02150

E02152

E02200

SIZE

3/8” IPS

1/2” IPS

3/4” IPS

1” IPS

1-1/4” IPS

1-1/2” IPS

1-1/2” IPS

2” IPS

Low Pattern- Tubular

PART NO.

E03125

E03150

E03200

Box Pattern- Tubular

SIZE

1-1/4” Tubular

1-1/2” Tubular

2” Tubular

PART NO.

E04125

E04150

E04200

Box Pattern- Iron Pipe Size

SIZE

1-1/4” Tubular

1-1/2” Tubular

2” Tubular

PART NO.

E05125

E05150

Bell Pattern- Iron Pipe Size

SIZE

1-1/4” IPS

1-1/2” IPS

PART NO.

E06375

E06050

E06075

E06100

E06125

E06150

SIZE

3/8” IPS

1/2” IPS

3/4” IPS

1” IPS

1-1/4” IPS

1-1/2” IPS

Bell Pattern- Copper Tube Size

PART NO.

E07025

E07375

E07050

SIZE

1/4” CTS (3/8” OD)

3/8” CTS (1/2” OD)

1/2” CTS (5/8” OD)

Bell Pattern- Tubular

PART NO.

E08125

E08138

E08150

SIZE

1-1/4” OD Tubular

1-3/8” OD Tubular

1-1/2” OD Tubular

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Bell Pattern

FLANGE OD CTN/MSTR

2-1/2”

2-1/2”

25/2000

25/2000

2-1/2”

2-7/8”

2-7/8”

2-7/8”

252000

25/2000

25/1200

25/1200

FLANGE OD CTN/MSTR

2-1/2”

2-1/2”

25/2000

25/2000

2-1/2”

2-7/8”

2-7/8”

3”

3-1/2”

3-1/2”

25/2000

25/1200

25/1200

25/1200

25/600

25/1200

FLANGE OD CTN/MSTR

2-7/8” 25/1200

2-7/8”

3-1/2”

25/1200

25/1200

FLANGE OD CTN/MSTR

3” 5/300

3”

3”

5/300

5/300

FLANGE OD CTN/MSTR

3” 5/300

3” 5/300

FLANGE OD CTN/MSTR

2-3/8”

2-3/8”

25/1000

25/1000

2-3/8”

3”

3”

3”

25/1000

25/1000

25/1000

25/1000

FLANGE OD CTN/MSTR

2-3/8” 25/1000

2-3/8”

2-3/8”

25/1000

25/1000

FLANGE OD CTN/MSTR

3” 25/1000

3”

3”

25/1000

25/1000

B

75

Kitchen & Bath

Plastic Shallow Flange Escutcheons Floor and Ceiling Plates

76

• Corrosion-proof, indestructible, high-density polyethylene

• Tight fit

• CARTON QUANTITIES ONLY

B

Copper Tube Size

PART NO.

E15375

E15050

E15052

E15075

Iron Pipe Size

PART NO.

E16375

E16050

E16075

E16150

E16151

E16200

Tubular

PART NO.

E03225

E03250

SIZE

1/2” OD (3/8” CTS)

5/8” OD (1/2” CTS)

5/8” OD (1/2” CTS)

7/8” OD (3/4” CTS)

SIZE

3/8” IPS

1/2” IPS

3/4” IPS

1-1/2” IPS

1-1/2” IPS

2” IPS

SIZE

1-1/4” Tubular

1-1/2” Tubular

COLOR

White

White

Almond

White

COLOR

White

White

White

White

Almond

White

COLOR

White

White

Flexible Floor and Ceiling Plates

CTN/MSTR

50/1000

50/1000

50/1000

50/1000

CTN/MSTR

50/1000

50/1000

50/1000

50/800

50/800

50/800

CTN/MSTR

25/25

50/300

• Chrome plated

• CARTON QUANTITIES ONLY

PART NO.

F07375

F07050

F07075

F07099

F07100

F07124

F07125

F07150

F07200

F07201

F07300

PART NO.

F06200

F06201

F06250

F06251

F06300

F06301

F06351

F06400

F06375

F06050

F06075

F06099

F06100

F06124

F06125

F06150

F06401

F06500

F06600

F06800

White Plastic

Chrome Plated Plastic

IPS CTS

2”

-

2-1/2”

-

3”

-

-

4”

-

5”

6”

8”

3/8”

1/2”

3/4”

-

1/2”

3/4”

-

1”

1”

-

-

1-1/4”

1-1/4” 1-1/2”

1-1/2”

2”

-

-

-

2-1/2”

-

3”

3-1/2”

-

-

-

4”

-

IPS

3/8”

1/2”

3/4”

-

1”

-

1-1/4”

1-1/2”

2”

-

3”

CTS

1/2”

3/4”

-

1”

-

1-1/4”

1-1/2”

-

-

2”

-

FLANGE OD

4.450

4.205

5.313

4.688

5.875

5.375

5.875

6.781

2.572

2.787

2.997

3.077

3.210

3.308

3.580

3.900

6.344

8.531

9.688

13.000

FLANGE OD

2.572

2.787

2.997

3.077

3.210

3.308

3.580

3.900

4.450

4.205

5.825

CTN/MSTR

12/1080

12/1080

12/1440

12/1080

12/1440

12/1440

12/1200

12/1200

12/720

12/720

12/480

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

CTN/MSTR

12/720

12/720

12/600

12/600

12/480

12/240

12/240

12/240

12/1080

12/1080

12/1440

12/1080

12/1440

12/1440

12/1200

12/1200

12/240

6/240

6/120

6/96

• Chrome plated

• Boxed

• CARTON QUANTITIES ONLY

Light 24 Gauge- Copper Tube Size

PART NO.

F01375

F01050

F01075

F01100

F01125

F01150

SIZE

3/8” CTS (1/2” OD)

1/2” CTS (5/8” OD)

3/4” CTS (7/8” OD)

1” CTS (1-1/8” OD)

1-1/4” CTS (1-3/8” OD)

1-1/2” CTS (1-5/8” OD)

Light 24 Gauge- Iron Pipe Size

PART NO.

F04375

F04050

F04075

F04100

F04125

F04150

F04200

F04250

F04300

F04350

F04400

F04500

F04600

F04800

F04999

FLANGE OD CTN/MSTR

2-1/2”

2-5/8”

2-27/32”

3-9/32”

3-5/8”

3-15/16”

12/576

12/576

12/576

12/576

12/576

12/576

PART NO.

F02375

F02050

F02075

F02100

F02125

F02150

F02200

SIZE

3/8” IPS

1/2” IPS

3/4” IPS

1” IPS

1-1/4” IPS

1-1/2” IPS

2” IPS

Heavy 21 Gauge with Springs- Copper Tube Size

FLANGE OD CTN/MSTR

2-1/2”

2-5/8”

2-27/32”

12/576

12/576

12/576

3-9/32”

3-5/8”

3-15/16”

4-3/8”

12/576

12/576

12/576

12/576

PART NO.

F03375

F03050

F03075

F03100

F03125

F03150

F03200

F03250

F03300

SIZE

3/8” CTS (1/2” OD)

1/2” CTS (5/8” OD)

3/4” CTS (7/8” OD)

1” CTS (1-1/8” OD)

1-1/4” CTS (1-3/8” OD)

1-1/2” CTS 1-5/8” OD)

2” CTS (2-1/8” OD)

2-1/2” CTS (2-5/8” OD)

3” CTS (3-1/8” OD)

Heavy 21 Gauge with Springs- Iron Pipe Size

FLANGE OD CTN/MSTR

2-1/8”

2-7/16”

2-21/32”

12/480

12/480

12/480

2-27/32”

3-9/32”

3-5/8”

4-3/16”

4-15/16”

5-3/16”

12/480

12/240

12/240

12/240

6/240

6/240

SIZE

3/8” IPS

1/2” IPS

3/4” IPS

1” IPS

1-1/4” IPS

1-1/2” IPS

2” IPS

2-1/2” IPS

3” IPS

3-1/2” IPS

4” IPS

5” IPS

6” IPS

8” IPS

10” IPS

FLANGE OD CTN/MSTR

2-1/2”

2-5/8”

2-27/32”

12/480

12/480

12/480

3-9/32”

3-5/8”

3-15/16”

4-3/8”

5-7/32”

5-29/32”

6-9/16”

7-3/16”

8-7/8”

10”

13”

15”

12/480

12/240

12/240

12/240

6/120

6/120

6/120

6/120

12/60

12/60

6/48

1/48

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

B

B

Stainless Steel Repair Cover Plates

• Polished stainless steel finish

• 1, 2 or 3 hole design to fit multitude of valves

• Easily attaches with silicone caulk; 1-hole has brackets and screw

• 7-1/4” x 13” long

PART NO.

T73815

T73816

T73817

T73818

# OF HOLES

3

1

1

2

DIAMETER

5-1/8”

1-3/8”

1-3/8”

3-3/4”

Cover Plates

• Mirrored acrylic

• Conceals damaged/cracked tiles

• Fits all standard bath/shower fittings

• No tools required- use silicone caulk

• DO NOT use abrasive cleaners

T73001

B

T73002

B

CTN/MSTR

20/40

20/40

20/40

20/40

A A C

C

A

1-11/16”

B

3-1/2”

C

3-1/2”

T73003

B

THICKNESS

1/8”

A

C

A

1-3/4”

B

14”

C

6”

THICKNESS

1/8”

PART NO. DESCRIPTION

T73001 Tub spout model

T73002

T73003

T73004

One handle model

Two handle model

Three handle model

Sewer Relief Valve and Cleanout

Kitchen & Bath

• Releases waste to outside of buildings in the event of sewer line blockage, preventing costly damage due to sewage backflow or overflow.

• Applicable in residential, commercial, or industrial settings- any structure connected to sewer lines or septic tanks

• Patent #4,475,571

• Meets ASTM specifications

• Automatic unlock and re-lock

• Vandal- resistant

• Safe in yard or high traffic areas

• Solvent welds over 4” Schedule 40 DWV pipe

• Removable lid provides full access to cleanout

• May be used to replace existing exterior cleanouts

• Easily adaptable to new or existing sewer lines

• Water and waste swirl in bowl until blockage is cleared

PART NO.

S62100

S62101

Locked in Normal Position

DESCRIPTION

PVC sewer relief valve

ABS sewer relief valve

Opens When Overfl ow Occurs

CTN/MSTR

1/1

1/1

Sewer Stopper/ Backflow Preventer

A

5”

A

B

14”

C

8”

T73004

B

THICKNESS

1/8”

C

A

1-3/4”

B

14”

SIZE

3-1/2” diameter

8” x 14”

6” x 14”

6” x 14”

C

6”

THICKNESS

1/8”

CTN/MSTR

1/300

1/100

1/40

1/36

PART NO.

S63200

S63300

S63400

• Use inside drain line to help guard against backups

• Creates seal in pipe to reduce sewer gases

• Secures into place with set screws

• Compression fit

DESCRIPTION

2” sewer stopper

3” sewer stopper

4” sewer stopper

MATERIAL

ZP Steel

Brass

Brass

CTN/MSTR

1/100

1/80

1/60

B

Got To Have It!

Sewer Popper™ Cleanout and Relief Valve

• Automatic pop-up releases sewage overfl ow outside the house

• Prevents thousands of dollars in property damages

• Eliminates health hazards associated with sewage overfl ow

• Vandal- and tamper-resistant center

• Threaded for 3” or 4” pipe

• Constructed of white PVC

• Threaded unit can be used with PVC or ABS

• For cast iron pipe, use standard no hub clamp

• Meets Southern Building Code Section 301.10, Principle No.10

• Patent No. 5,209,257

1

Locate the outdoor main sewer cleanout nearest the structure.

Threaded Plug

Adapter

2

Remove the existing threaded plug.

3

Hand tighten the

Sewer Popper in place of the plug.

3” or 4” Pipe

PART NO.

S62304

DESCRIPTION

3”x 4” Sewer Popper™

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

CTN/MSTR

1/ 6

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 77

Plumbing Connectors

Flexible Stainless Steel Plumbing Connectors Flexible Stainless Steel Plumbing Connectors

B

PART NO.

S04200

S04201

S04202

S04203

S04204

S04205

S04206

S04207

S04208

S04209

S04210

Faucet

• Reliable, trouble-free service inner core of non-toxic polymer withstands temperatures of 33°F (1°C) to 174°F (99°C)

• Leak proof seal- High quality outer braid of stainless steel and exclusive crimp-on fittings for maximum performance

• Quick and easy installation- No special tools; no soldering

• No pipe bending- Flexible connectors simplify installation, even in cramped spaces

• Chrome plated brass nut

• UPC listed

• Lead free

Faucet

OD x FIP

3/8” x 1/2”

3/8” x 1/2”

3/8” x 1/2”

3/8” x 1/2”

3/8” x 1/2”

3/8” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

LENGTH

9

12

16

20

30

36

12

16

20

30

36

CTN/MSTR

25/100

25/100

25/100

25/100

25/50

25/100

25/100

25/100

25/100

25/50

25/100

PART NO.

S04211

S04212

S04213

S04214

S04215

FIP x FIP

1/2” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

LENGTH

12

16

20

30

36

CTN/MSTR

25/100

25/175

25/100

25/50

25/50

• Reliable, trouble-free service inner core of non-toxic polymer withstands temperatures of 33°F (1°C) to 174°F (81°C); burst pressure 1,000 PSI

• Leak proof seal- High quality outer braid of stainless steel and exclusive crimp-on fittings for maximum performance

• Quick and easy installation- No special tools; no soldering

• No pipe bending- Flexible connectors simplify installation, even in cramped spaces

• Chrome plated brass nut

• UPC listed

• Lead free

SS “Delta” Style Faucet

PART NO.

S04239

S04240

S04241

S04242

S04243

S04244

Texas Style Faucet

OD x COMP FITTING

3/8” x 3/8”

3/8” x 3/8”

3/8” x 3/8”

3/8” x 3/8”

3/8” x 3/8”

3/8” x 3/8”

LENGTH

20

30

36

9

12

16

CTN/MSTR

25/100

25/100

25/100

25/100

25/50

25/100

PART NO.

S04245

S04246

S04247

S04248

S04249

S04250

FL x OD

3/8” x 3/8”

3/8” x 3/8”

3/8” x 3/8”

3/8” x 3/8”

3/8” x 3/8”

3/8” x 3/8”

LENGTH

20

30

36

9

12

16

CTN/MSTR

25/100

25/100

25/100

25/100

25/50

25/100

• Reliable, trouble-free service inner core of non-toxic polymer withstands temperatures of 33°F (1°C) to 174°F (99°C)

• Leak proof seal- High quality outer braid of stainless steel and exclusive crimp-on fittings for maximum performance

• Quick and easy installation- No special tools; no soldering

• No pipe bending- Flexible connectors simplify installation, even in cramped spaces

• UPC listed

• Lead free

Ballcock

PART NO.

S04216

S04217

S04218

S04219

S04220

S04221

S04222

S04223

S04255

S04288

OD x BC

3/8” x 7/8”

3/8” x 7/8”

3/8” x 7/8”

3/8” x 7/8”

1/2” x 7/8”

1/2” x 7/8”

1/2” x 7/8”

1/2” x 7/8”

3/8” x 7/8” w/ brass nut

3/8” x 7/8” w/ brass nut

LENGTH

9

12

16

20

9

12

16

20

12

20

CTN/MSTR

25/100

25/100

25/100

25/100

25/100

25/100

25/100

25/100

25/100

10/50

Ballcock

PART NO.

S04224

S04225

S04226

Ballcock

FIP x BC

1/2” x 7/8”

1/2” x 7/8”

1/2” x 7/8”

LENGTH

9

12

20

CTN/MSTR

25/100

25/100

25/100

PART NO.

S04280

S04285

Washing Machine

FLARE x BC

1/2” x 7/8”

3/8” x 7/8”

LENGTH

20

20

CTN/MSTR

25/100

25/50

PART NO.

S04261

S04227

S04228

S04229

Icemaker

PART NO.

S04230

S04231

S04232

FEM HOSE x FEM HOSE

3/4” x 3/4”

3/4” x 3/4”

3/4” x 3/4”

3/4” x 3/4”

OD x OD

1/4” x 1/4”

1/4” x 1/4”

1/4” x 1/4”

LENGTH

12

48

60

72

LENGTH

12

60

84

CTN/MSTR

25/100

5/50

5/175

5/50

CTN/MSTR

5/50

5/50

5/50

78

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

B

B

Flexible Stainless Steel Plumbing Connectors

Plumbing Connectors

Braided Nylon Plumbing Connectors

• Reliable, trouble-free service inner core of non-toxic polymer withstands temperatures of 33°F (1°C) to 174°F (81°C); burst pressure 1,000 PSI

• Leak proof seal- High quality outer braid of stainless steel and exclusive crimp-on fittings for maximum performance

• Quick and easy installation- No special tools; no soldering

• No pipe bending- Flexible connectors simplify installation, even in cramped spaces

• Chrome plated brass nut

• UPC listed

• Lead free

Dishwasher with 90° Elbow

PART NO.

S04233

S04234

S04235

S04236

S04237

S04238

Dishwasher

OD x MIP

3/8” x 3/8”

3/8” x 3/8”

3/8” x 3/8”

1/2” x 3/8”

1/2” x 3/8”

1/2” x 3/8”

LENGTH

48

60

72

48

60

72

CTN/MSTR

25/50

25/50

25/50

25/50

25/50

25/50

PART NO.

S04260

S04268

S04269

S04270

OD x OD

3/8” x 3/8”

3/8” x 3/8”

3/8” x 3/8”

3/8” x 3/8”

LENGTH

48

12

16

20

CTN/MSTR

25/50

25/100

25/100

25/100

Stainless Steel Dishwasher Connection with Garden Hose Fitting and 90° Elbow

• Use to connect Whirlpool*, Maytag*,

Amana*, Kitchen Aid* and Jenn-Air* dishwashers manufactured after

September 2009

PART NO. DESCRIPTION

S04275 3/8” OD x 3/8” MIP x 60”

CTN/MSTR

1/1

S04276

S04267

3/8” OD x 3/8” MIP x 72”

3/4” FHT x 60” with long 90° end

1/1

1/15

G20086LF Garden Hose Ftg & 90 only - 3/4” FGHT x 3/8” OD Comp 1/1

* The manufacturers’ names are used only to describe whose products the products will fit.

PART NO.

S04400

S04401

S04402

S04403

S04404

S04405

S04406

S04407

S04408

Faucet

• Reliable, economy style connectors

• Temperature rated 173° (82°C)

• Burst pressure is 450 PSI

• Chrome plated nut

• UPC listed

• Lead free

Faucet

OD x FIP

3/8” x 1/2”

3/8” x 1/2”

3/8” x 1/2”

3/8” x 1/2”

3/8” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

PART NO.

S04409

S04410

S04411

S04440

Faucet

FIP x FIP

1/2” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

1/2” x 1/2”

PART NO.

S04450

S04455

Delta*

COMP x FIP

3/8” x 1/2”

3/8” x 1/2”

PART NO.

S04412

S04413

Toilet

PART NO.

S04414

S04415

S04416

S04417

S04418

S04419

S04420

S04421

OD x COMP

FITTING

3/8” x 3/8”

3/8” x 3/8”

OD x BC

3/8” x 7/8”

3/8” x 7/8”

3/8” x 7/8”

3/8” x 7/8”

1/2” x 7/8”

1/2” x 7/8”

1/2” x 7/8”

1/2” x 7/8”

Toilet

PART NO.

S04422

S04423

S04424

Dishwasher with 90° Elbow

FIP x BC

1/2” x 7/8”

1/2” x 7/8”

1/2” x 7/8”

LENGTH

9

12

16

20

30

12

16

20

30

LENGTH

12

16

20

36

LENGTH

24

36

LENGTH

12

20

LENGTH

9

12

16

20

9

12

16

20

LENGTH

9

12

20

CTN/MSTR

25/100

25/100

25/100

25/100

25/50

25/100

25/100

25/150

25/100

CTN/MSTR

25/100

25/100

25/100

25/100

CTN/MSTR

25/100

25/50

CTN/MSTR

25/100

25/100

CTN/MSTR

25/100

25/100

25/100

25/100

25/100

25/200

25/100

25/100

CTN/MSTR

25/100

25/100

25/100

PART NO.

OD x MIP LENGTH CTN/MSTR

S04430 3/8” x 3/8” 72 10/40

* The manufacturers’ names are used only to describe whose products the products will fit.

B

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 79

Plumbing Connectors/Supply Stops

B

PEX Supply Tube (3/8” OD)

• Rated 100 PSI at 180°F

• Resistant to corrosion and damage due to freezing

• NSF listed material

PART NO. DESCRIPTION

S04101 3/8” x 12” Basin

S04102

S04103

3/8” x 15” Basin

3/8” x 20” Basin

S04104

S04108

S04105

S04106

S04107

3/8” x 30” Basin

3/8” x 36” Basin

3/8” x 12” Tank

3/8” x 15” Tank

3/8” x 20” Tank

CTN/MSTR

10/325

10/250

10/150

10/200

10/200

10/300

10/250

10/175

PEX Supply Tube with Ferrule

• Supplied with ferrule

(3/8” compression sleeve)

• Rated 100 PSI at 180°

• NSF listed material

PART NO. DESCRIPTION

S04121

S04123

3/8” x 12 Basin

S04124

S04128

3/8” x 20 Basin

3/8” x 30 Basin

3/8” x 36 Basin

S04125

S04127

3/8” x 12 Tank

3/8” x 20 Tank

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

10/100

Chrome Plated Flexible Basin Supply Tube

• Lead free

PART NO. DESCRIPTION

S04020 3/8” x 12” Basin

S04021

S04022

S04023

3/8” x 15” Basin

3/8” x 20” Basin

S04024

S04025

3/8” x 30” Basin

3/8” x 36” Basin

1/2” x 12” Basin

S04026 1/2” x 20” Basin

CTN/MSTR

1/500

1/400

1/300

1/200

1/200

1/200

1/200

Chrome Plated Flexible Supply Tube with

Plastic Nose

• Chrome plated

• With plastic nose

• Lead free

PART NO. DESCRIPTION

S04027

S04028

3/8” x 12” Tank

S04029

S04030

3/8” x 16” Tank

3/8” x 20” Tank

1/2” x 12” Tank

CTN/MSTR

1/500

1/300

1/300

1/50

• Chrome plated

• With plastic nose cone

• Lead free

PART NO. DESCRIPTION

S04031

S04032

3/8” x 12” Basin

3/8” x 20” Basin

CTN/MSTR

1/200

1/100

Rough Brass Easy Connect Tee

• Brass

• Attaches to outlet of stop valve to give you 2 outlets

• Lead free

PART NO. DESCRIPTION

C74250LF 3/8” F Comp x 3/8” M Comp x 3/8” M Comp

C74251LF 3/8” F Comp x 3/8” M Comp x 1/4” M Comp

CTN/MSTR

5/25

5/25

Chrome Plated Quarter Turn Repair Stop Valve

• Attach to outlet of broken valve to give you another valve

• AB1953 compliant

• Lead free

PART NO. DESCRIPTION

S10355 3/8” F Comp x 3/8” M Comp x 3/8” M Comp

CTN/MSTR

5/25

Chrome Plated Brass Multi-Turn Supply Stop

S10338

• cUPC listed

• Lead free

S10300 S10323 S10301 S10335

PART NO. DESCRIPTION

S10338 3/8 FIP x 3/8 OD Angle

S10321

S10300

S10302

1/2 FIP x 1/4 OD Angle

1/2 FIP x 3/8 OD Angle

1/2 FIP x 3/8 OD Straight

CTN/MSTR

1/200

1/200

1/200

1/200

S10324

S10301

S10323

S10303

S10316

S10325

S10326

S10419

S10422

S10335

5/8 OD x 1/4 OD Angle

5/8 OD x 3/8 OD Angle

3/8 OD x 3/8 OD Straight

5/8 OD x 3/8 OD Straight

5/8 OD x 1/2 OD Straight

1/2 Sweat x 3/8 OD Angle

1/2 Sweat x 3/8 OD Straight

1/2” SWT x 3/8” OD Angle, Rough Brass

S10318

S10412

S10337

1/2” SWT x 3/8” OD Straight, Rough Brass

1/2 PEX x 1/4 OD Angle

1/2 PEX x 3/8 OD Angle

1/2” PEX x 1/4” OD Straight

1/2 PEX x 3/8 OD Straight

10/200

1/200

1/200

10/200

1/200

S10319 1/2 CPVC x 3/8 OD Straight

S10320 1/2 CPVC x 3/8 OD Angle

S10408

S10410

S10411

1/2” SWT x 3/8” OD Angle with Loose Key

1/2” FIP x 3/8” OD x 1/4” OD 3-Way

1/2” FIP x 3/8” OD x 3/8” OD 3-Way

S10420

S10421

1/2” SWT x 3/8” OD x 1/4” OD 3-Way, Rough Brass

1/200

1/200

10/200

10/200

10/200

10/200

1/2” SWT x 3/8” OD x 3/8” OD 3-Way, Rough Brass 10/200

1/200

1/200

1/200

1/200

1/200

1/200

1/200

10/200

80

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Chrome Plated Brass Quarter Turn Supply Stop

Supply Stops/Sink Faucets

Chrome Plated Single Sink Bibb

• Chrome plated bodies and tee handles

• Replaceable washers

S10339

• cUPC listed

• Lead free

S10327 S10404 S10330 S10311 S10336

PART NO. DESCRIPTION

S10339 3/8 FIP x 3/8 OD Angle

S10328 1/2 FIP x 1/4 OD Angle

S10310 1/2 FIP x 3/8 OD Angle

S10327 3/8 FIP x 3/8 OD Straight

S10312 1/2 FIP x 3/8 OD Straight

S10317 5/8 OD x 1/4 OD Angle

S10311 5/8 OD x 3/8 OD Angle

S10330 3/8 OD x 3/8 OD Straight

S10417 5/8” OD x 1/4” OD Straight

S10313 5/8 OD x 3/8 OD Straight

S10331 1/2 Sweat x 3/8 OD Angle

S10332 1/2 Sweat x 3/8 OD Straight

S10418 1/2” SWT x 1/4” OD Angle

S10336 1/2 PEX x 1/4 OD Angle

S10314 1/2 PEX x 3/8 OD Angle

S10315 1/2 PEX x 3/8 OD Straight

S10340 1/2 x 3/8 OD Angle Wirsbo® style

S10341 1/2 x 3/8 OD Straight Wirsbo® style

S10406 1/2” PEX F1960 x 1/4” OD Angle

S10407 1/2” PEX F1960 x 1/4” OD Straight

S10401 1/2” CPVC x 3/8” COMP Angle

S10402 1/2” CPVC x 1/4” COMP Straight

S10403 1/2” CPVC x 3/8” COMP Straight

S10416 1/2” Push On x 7/8” Toilet with 12” Connector

S10414 1/2” Push On x 1/2” Faucet with 18” Connector

S10409 1/2” SWT x 3/8” OD Angle with Loose Key

C76571LF 1/2” Push On x 3/8” COMP Angle

10/50

10/50

10/200

1/120

C76570LF 1/2” Push On x 3/8” COMP Straight 1/120

S10423 1/2” SWT x 3/8” OD Angle with 5” Extension and Escutcheon 10/50

S10424 1/2” SWT x 3/8” OD Straight with 5” Extension and Escutcheon 10/50

S10333 5/8” OD x 3/8” OD x 3/8” OD Angle, 3-Way

S10334 5/8” OD x 3/8” OD x 1/4” OD Angle, 3-Way

10/200

10/200

10/100 S10404 5/8” OD x 3/8” OD x 1/4” OD Dual Valve

S10405 5/8” OD x 3/8” OD x 3/8” OD Dual Valve

S10400 Replacement Handle for Quarter Turn Stop Valve

10/100

10/200

1/150

1/144

1/144

10/200

10/200

10/200

10/200

10/200

10/200

10/200

CTN/MSTR

24/144

1/200

1/200

1/200

1/200

1/200

1/200

1/200

10/200

1/200

1/200

1/200

10/200

Cross Handle Self Closing Valve

• Chrome plated

• Heavy brass construction

PART NO.

S08003

INLET

1/2” FIP

Wall Mount Sink Faucet

• Chrome plated with soap dish mounted on body

• 8” center to center

• Adjustable 1/2” female threaded eccentric couplings

• Replaceable seats and stems

• Meets NSF standard 61.9

• Lead free

PART NO. DESCRIPTION

S08008 8” tubular spout

S08012

S08030

12” tubular spout

Hot repair kit (handle, stem and seat)

S08031

S08032

Cold repair kit (handle, stem and seat)

Union repair kit (union assembly)

CTN/MSTR

1/12

1/12

1/100

1/100

1/50

Laundry Tray Faucet

FLANGE

Fixed (3/4” hose outlet)

CTN/MSTR

12/72

B

A01006

PART NO. DESCRIPTION

L47001 Chrome laundry tray faucet

L47004 With gooseneck spout

• Supplied with garden hose adapter and A01006 aerator

• Can be used either way with either adapter or aerator

• Meets Detroit Code

• Lead free

CTN/MSTR

1/24

1/24

Basin Faucet

• Chrome plated

• Replaceable seats and stems

• Furnished with hot and cold buttons

• Meets NSF standard 61.9

• Lead free

Heavy Pattern Standard Pattern

PART NO. DESCRIPTION

F39001

F39002

Heavy pattern with aerator

F39004

F39005

Standard pattern

Repair kit for F39002 series (Handle, seat, stem and buttons)

Repair kit for F39001 series (Handles, seat, stem and buttons)

CTN/MSTR

1/30

1/50

1/100

1/150

PART NO. DESCRIPTION

S05105 1/2” FIP self closing valve

CTN/MSTR

25/50

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 81

Sink Faucets/Drinking F ountain Bubblers

Self-Closing Basin Faucet and Shower Valve

Self-Closing Basin Faucet Shower Valve with Pull Chain

• Chrome plated heavy duty pattern

• Deluxe aerator

• 1/2” FIP connection

• Replaceable stem, cam and spring mechanism

• Shower valves ideal for urinals when used with standpipe assembly

B PART NO. DESCRIPTION

F39010 Basin faucet

CTN/MSTR

1/36

S05100 Shower valve with pull chain (7” chain)

S05102 Tailpiece assembly for S05100 with nut and flange

1/50

1/100

S05101 Repair kit (stem and cam mechanism) 1/10

Service Sink Faucet

Lever Handles Cross Handles

• Integral stops; 1/4 turn for S55349

• Complete with all mounting hardware

• Integrated vacuum breaker (ASSE 1001)

• Front hook to hang bucket

PART NO. DESCRIPTION

S55349 Service sink faucet with lever handles

S55350

S55352

S55353

S55354

Service sink faucet with cross handles

Lever handle and stem repair kit S55349

Integral stop repair kit for S55350

Vacuum breaker repair kit for S55350

Hose and Hose Bracket for Service Sink

• Heavy duty 300 PSI cloth-reinforced hose

• 3/4” brass hose coupling at one end

• 5” x 3” stainless steel bracket with rubber grips

CTN/MSTR

1/8

1/6

1/50

1/100

1/100

Drinking Fountain Bubbler and Cartridge

• Chrome plated brass body

• 3/8” FIP connection

• Stainless steel cartridge

• Lead free

PART NO. DESCRIPTION

B45215 CP brass bubbler with stainless steel cartridge

B45216 Stainless steel replacement cartridge

CTN/MSTR

1/40

100/500

Drinking Fountain Bubbler with Face Guard

Flexible Water Shield

• Chrome plated brass body

• Equipped with unique neo-poly water shield to prevent injuries to teeth, gums and face

• Tamper proof design requires 5/16” hex key to remove/ replace water shield for cleaning

• B45218 Kit includes water shield, washer, and retainer nut

• Lead free

PART NO. DESCRIPTION

B45216 Stainless steel replacement cartridge

B45217 Chrome plated brass bubbler

B45218 Polymer water shield kit

CTN/MSTR

100/500

1/40

1/120

Self-Closing Drinking Fountain

• Chrome plated brass

• Mildew resistant

• Perfect for schools

• Stainless steel cartridge

• 1/2” Female pipe threads

• Lead free

PART NO. DESCRIPTION

B45200 Drinking fountain

CTN/MSTR

1/25

Retrofit Bubbler Kit

• Replaces fountain on china fixtures

• Contains bubbler 1/2” x 3/8” x 3-1/2” nipple, rosette flange, locknut, coupling nut and 1-3/4” faucet cover

• All metal

• Lead free

PART NO. DESCRIPTION

B45220 Drinking fountain

CTN/MSTR

1/20

PART NO. DESCRIPTION

M05001 30” hose with bracket

M05005 Bracket only

CTN/MSTR

1/1

1/100

Mop Hanger for Service Sink

• 24” x 3” stainless steel hanger with three rubber tool grips

• Anchors included

PART NO. DESCRIPTION

M05003 Mop hanger

CTN/MSTR

1/25

82

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

3/8” OD (1/4” ID) Uncoated with Fittings (cont.)

• Durable stainless steel 304

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Corrosion resistant

PART NO. DESCRIPTION

G70046 1/2” FIP x 3/8” MIP x 60”

G70047 3/8” FIP x 1/2” MIP x 60”

G70048 3/8” FIP x 3/8” MIP x 60”

G70049 1/2” MIP x 1/2” MIP x 72”

G70050 1/2” FIP x 1/2” FIP x 72”

G70051 3/8” FIP x 3/8” FIP x 72”

G70052 1/2” FIP x 1/2” MIP x 72”

G70053 1/2” FIP x 3/8” MIP x 72”

G70054 3/8” FIP x 1/2” MIP x 72”

G70055 3/8” FIP x 3/8” MIP x 72”

Gas Connectors

3/8” OD (1/4” ID) Uncoated with Fittings

• Durable stainless steel 304

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Corrosion resistant

PART NO. DESCRIPTION

G70000 1/2” MIP x 1/2” MIP x 12”

G70001 1/2” FIP x 1/2” FIP x 12”

G70002 3/8” FIP x 3/8” FIP x 12”

G70003 1/2” FIP x 1/2” MIP x 12”

G70004 1/2” FIP x 3/8” MIP x 12”

G70005 3/8” FIP x 1/2” MIP x 12”

G70006 3/8” FIP x 3/8” MIP x 12”

G70007 1/2” MIP x 1/2” MIP x 18”

G70008 1/2” FIP x 1/2” FIP x 18”

G70009 3/8” FIP x 3/8” FIP x 18”

G70010 1/2” FIP x 1/2” MIP x 18”

G70011 1/2” FIP x 3/8” MIP x 18”

G70012 3/8” FIP x 1/2” MIP x 18”

G70013 3/8” FIP x 3/8” MIP x 18”

G70014 1/2” MIP x 1/2” MIP x 24”

G70015 1/2” FIP x 1/2” FIP x 24”

G70016 3/8” FIP x 3/8” FIP x 24”

G70017 1/2” FIP x 1/2” MIP x 24”

G70018 1/2” FIP x 3/8” MIP x 24”

G70019 3/8” FIP x 1/2” MIP x 24”

G70020 3/8” FIP x 3/8” MIP x 24”

G70021 1/2” MIP x 1/2” MIP x 30”

G70022 1/2” FIP x 1/2” FIP x 30”

G70023 3/8” FIP x 3/8” FIP x 30”

G70024 1/2” FIP x 1/2” MIP x 30”

G70025 1/2” FIP x 3/8” MIP x 30”

G70026 3/8” FIP x 1/2” MIP x 30”

G70027 3/8” FIP x 3/8” MIP x 30”

G70028 1/2” MIP x 1/2” MIP x 36”

G70029 1/2” FIP x 1/2” FIP x 36”

G70030 3/8” FIP x 3/8” FIP x 36”

G70031 1/2” FIP x 1/2” MIP x 36”

G70032 1/2” FIP x 3/8” MIP x 36”

G70033 3/8” FIP x 1/2” MIP x 36”

G70034 3/8” FIP x 3/8” MIP x 36”

G70035 1/2” MIP x 1/2” MIP x 48”

G70036 1/2” FIP x 1/2” FIP x 48”

G70037 3/8” FIP x 3/8” FIP x 48”

G70038 1/2” FIP x 1/2” MIP x 48”

G70039 1/2” FIP x 3/8” MIP x 48”

G70040 3/8” FIP x 1/2” MIP x 48”

G70041 3/8” FIP x 3/8” MIP x 48”

G70042 1/2” MIP x 1/2” MIP x 60”

G70043 1/2” FIP x 1/2” FIP x 60”

G70044 3/8” FIP x 3/8” FIP x 60”

G70045 1/2” FIP x 1/2” MIP x 60”

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

3/8” OD (1/4” ID) Yellow Coated with Fittings

• Durable stainless steel 304

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Coated connectors add additional safety in highly corrosive environments or in areas where caustic chemicals are located

• Corrosion resistant

PART NO. DESCRIPTION

G70100 1/2” MIP x 1/2” MIP x 12”

G70101 1/2” FIP x 1/2” FIP x 12”

G70102 3/8” FIP x 3/8” FIP x 12”

G70103 1/2” FIP x 1/2” MIP x 12”

G70104 1/2” FIP x 3/8” MIP x 12”

G70105 3/8” FIP x 1/2” MIP x 12”

G70106 3/8” FIP x 3/8” MIP x 12”

G70107 1/2” MIP x 1/2” MIP x 18”

G70108 1/2” FIP x 1/2” FIP x 18”

G70109 3/8” FIP x 3/8” FIP x 18”

G70110 1/2” FIP x 1/2” MIP x 18”

G70111

G70112

1/2” FIP x 3/8” MIP x 18”

3/8” FIP x 1/2” MIP x 18”

G70113

G70114

G70115

3/8” FIP x 3/8” MIP x 18”

1/2” MIP x 1/2” MIP x 24”

1/2” FIP x 1/2” FIP x 24”

3/8” FIP x 3/8” FIP x 24” G70116

G70117

G70118

G70119

1/2” FIP x 1/2” MIP x 24”

1/2” FIP x 3/8” MIP x 24”

3/8” FIP x 1/2” MIP x 24”

G70120

G70121

G70122

3/8” FIP x 3/8” MIP x 24”

1/2” MIP x 1/2” MIP x 30”

1/2” FIP x 1/2” FIP x 30”

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

B

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 83

Gas Connectors

B

3/8” OD (1/4” ID) Yellow Coated with Fittings (cont.)

• Durable stainless steel 304

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Coated connectors add additional safety in highly corrosive environments or in areas where caustic chemicals are located

• Corrosion resistant

PART NO. DESCRIPTION

G70123 3/8” FIP x 3/8” FIP x 30”

G70124 1/2” FIP x 1/2” MIP x 30”

G70125 1/2” FIP x 3/8” MIP x 30”

G70126 3/8” FIP x 1/2” MIP x 30”

G70127 3/8” FIP x 3/8” MIP x 30”

G70128 1/2” MIP x 1/2” MIP x 36”

G70129 1/2” FIP x 1/2” FIP x 36”

G70130 3/8” FIP x 3/8” FIP x 36”

G70131 1/2” FIP x 1/2” MIP x 36”

G70132 1/2” FIP x 3/8” MIP x 36”

G70133 3/8” FIP x 1/2” MIP x 36”

G70134 3/8” FIP x 3/8” MIP x 36”

G70135

G70136

1/2” MIP x 1/2” MIP x 48”

1/2” FIP x 1/2” FIP x 48”

G70137

G70138

G70139

G70140

G70141

G70142

G70143

G70144

G70145

G70146

G70147

G70148

G70149

G70150

G70151

G70152

3/8” FIP x 3/8” FIP x 48”

1/2” FIP x 1/2” MIP x 48”

1/2” FIP x 3/8” MIP x 48”

3/8” FIP x 1/2” MIP x 48”

3/8” FIP x 3/8” MIP x 48”

1/2” MIP x 1/2” MIP x 60”

1/2” FIP x 1/2” FIP x 60”

3/8” FIP x 3/8” FIP x 60”

1/2” FIP x 1/2” MIP x 60”

1/2” FIP x 3/8” MIP x 60”

3/8” FIP x 1/2” MIP x 60”

3/8” FIP x 3/8” MIP x 60”

1/2” MIP x 1/2” MIP x 72”

1/2” FIP x 1/2” FIP x 72”

3/8” FIP x 3/8” FIP x 72”

G70153

G70154

G70155

1/2” FIP x 1/2” MIP x 72”

1/2” FIP x 3/8” MIP x 72”

3/8” FIP x 1/2” MIP x 72”

3/8” FIP x 3/8” MIP x 72”

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

5/8” OD (1/2” ID) Uncoated with Fittings

• Durable stainless steel 304

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Corrosion resistant

PART NO. DESCRIPTION

G71000 3/4” MIP x 3/4” MIP x 12”

G71001 3/4” MIP x 1/2” MIP x 12”

G71002 1/2” MIP x 1/2” MIP x 12”

G71003 3/4” FIP x 3/4” FIP x 12”

G71004 3/4” FIP x 1/2” FIP x 12”

G71005 1/2” FIP x 1/2” FIP x 12”

G71006 1/2” FIP x 3/4” MIP x 12”

G71007 3/4” FIP x 3/4” MIP x 12”

G71008 3/4” FIP x 1/2” MIP x 12”

G71009 1/2” FIP x 1/2” MIP x 12”

G71010 3/4” MIP x 3/4” MIP x 18”

G71011 3/4” MIP x 1/2” MIP x 18”

G71012

G71013

G71014

G71015

G71016

G71017

G71018

G71019

G71020

G71021

G71022

G71023

G71024

G71025

G71026

G71027

G71028

G71029

1/2” MIP x 1/2” MIP x 18”

3/4” FIP x 3/4” FIP x 18”

3/4” FIP x 1/2” FIP x 18”

1/2” FIP x 1/2” FIP x 18”

1/2” FIP x 3/4” MIP x 18”

3/4” FIP x 3/4” MIP x 18”

3/4” FIP x 1/2” MIP x 18”

1/2” FIP x 1/2” MIP x 18”

3/4” MIP x 3/4” MIP x 24”

3/4” MIP x 1/2” MIP x 24”

1/2” MIP x 1/2” MIP x 24”

G71031

G71032

G71033

G71034

G71035

G71036

G71037

G71038

3/4” FIP x 3/4” FIP x 24”

3/4” FIP x 1/2” FIP x 24”

1/2” FIP x 1/2” FIP x 24”

1/2” FIP x 3/4” MIP x 24”

3/4” FIP x 3/4” MIP x 24”

3/4” FIP x 1/2” MIP x 24”

1/2” FIP x 1/2” MIP x 24”

3/4” MIP x 1/2” MIP x 30”

1/2” MIP x 1/2” MIP x 30”

3/4” FIP x 3/4” FIP x 30”

3/4” FIP x 1/2” FIP x 30”

1/2” FIP x 1/2” FIP x 30”

1/2” FIP x 3/4” MIP x 30”

3/4” FIP x 3/4” MIP x 30”

3/4” FIP x 1/2” MIP x 30”

G71039

G71040

1/2” FIP x 1/2” MIP x 30”

3/4” MIP x 3/4” MIP x 36”

G71041

G71042

G71043

G71044

3/4” MIP x 1/2” MIP x 36”

1/2” MIP x 1/2” MIP x 36”

3/4” FIP x 3/4” FIP x 36”

3/4” FIP x 1/2” FIP x 36”

G71045 1/2” FIP x 1/2” FIP x 36”

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

84 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

5/8” OD (1/2” ID) Uncoated with Fittings (cont.)

• Durable stainless steel 304

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Corrosion resistant

G71058

G71059

G71060

G71061

G71062

G71063

G71064

G71066

G71067

G71068

G71069

G71070

G71071

G71072

G71074

G71075

G71076

G71077

G71078

G71079

PART NO. DESCRIPTION

G71046 1/2” FIP x 3/4” MIP x 36”

G71047 3/4” FIP x 3/4” MIP x 36”

G71048 3/4” FIP x 1/2” MIP x 36”

G71049 1/2” FIP x 1/2” MIP x 36”

G71050 3/4” MIP x 3/4” MIP x 48”

G71051 3/4” MIP x 1/2” MIP x 48”

G71052 1/2” MIP x 1/2” MIP x 48”

G71053 3/4” FIP x 3/4” FIP x 48”

G71054 3/4” FIP x 1/2” FIP x 48”

G71055 1/2” FIP x 1/2” FIP x 48”

G71056 1/2” FIP x 3/4” MIP x 48”

G71057 3/4” FIP x 3/4” MIP x 48”

3/4” FIP x 1/2” MIP x 48”

1/2” FIP x 1/2” MIP x 48”

3/4” MIP x 3/4” MIP x 60”

3/4” MIP x 1/2” MIP x 60”

1/2” MIP x 1/2” MIP x 60”

3/4” FIP x 3/4” FIP x 60”

3/4” FIP x 1/2” FIP x 60”

1/2” FIP x 3/4” MIP x 60”

3/4” FIP x 3/4” MIP x 60”

3/4” FIP x 1/2” MIP x 60”

1/2” FIP x 1/2” MIP x 60”

3/4” MIP x 3/4” MIP x 72”

3/4” MIP x 1/2” MIP x 72”

1/2” MIP x 1/2” MIP x 72”

3/4” FIP x 1/2” FIP x 72”

1/2” FIP x 1/2” FIP x 72”

1/2” FIP x 3/4” MIP x 72”

3/4” FIP x 3/4” MIP x 72”

3/4” FIP x 1/2” MIP x 72”

1/2” FIP x 1/2” MIP x 72”

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

Gas Connectors

5/8” OD (1/2” ID) Yellow Coated with Fittings

• Durable stainless steel 304

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Coated connectors add additional safety in highly corrosive environments or in areas where caustic chemicals are located

• Corrosion resistant

B

PART NO. DESCRIPTION

G71100 3/4” MIP x 3/4” MIP x 12”

G71102

G71103

1/2” MIP x 1/2” MIP x 12”

3/4” FIP x 3/4” FIP x 12”

G71104

G71105

G71106

G71107

G71108

G71109

G71110

G71111

G71112

G71113

G71114

G71115

G71116

G71117

G71118

G71119

G71120

G71121

G71122

G71123

G71124

G71125

G71126

G71127

G71128

G71129

G71130

3/4” FIP x 1/2” FIP x 12”

1/2” FIP x 1/2” FIP x 12”

1/2” FIP x 3/4” MIP x 12”

3/4” FIP x 3/4” MIP x 12”

3/4” FIP x 1/2” MIP x 12”

1/2” FIP x 1/2” MIP x 12”

3/4” MIP x 3/4” MIP x 18”

3/4” MIP x 1/2” MIP x 18”

1/2” MIP x 1/2” MIP x 18”

3/4” FIP x 3/4” FIP x 18”

3/4” FIP x 1/2” FIP x 18”

1/2” FIP x 1/2” FIP x 18”

1/2” FIP x 3/4” MIP x 18”

3/4” FIP x 3/4” MIP x 18”

3/4” FIP x 1/2” MIP x 18”

1/2” FIP x 1/2” MIP x 18”

3/4” MIP x 3/4” MIP x 24”

3/4” MIP x 1/2” MIP x 24”

1/2” MIP x 1/2” MIP x 24”

3/4” FIP x 3/4” FIP x 24”

3/4” FIP x 1/2” FIP x 24”

1/2” FIP x 1/2” FIP x 24”

1/2” FIP x 3/4” MIP x 24”

3/4” FIP x 3/4” MIP x 24”

3/4” FIP x 1/2” MIP x 24”

1/2” FIP x 1/2” MIP x 24”

G71131

G71132

G71133

G71134

G71135

G71136

G71137

G71138

G71139

G71140

G71141

G71142

3/4” MIP x 3/4” MIP x 30”

3/4” MIP x 1/2” MIP x 30”

1/2” MIP x 1/2” MIP x 30”

3/4” FIP x 3/4” FIP x 30”

3/4” FIP x 1/2” FIP x 30”

1/2” FIP x 1/2” FIP x 30”

1/2” FIP x 3/4” MIP x 30”

3/4” FIP x 3/4” MIP x 30”

3/4” FIP x 1/2” MIP x 30”

1/2” FIP x 1/2” MIP x 30”

3/4” MIP x 3/4” MIP x 36”

3/4” MIP x 1/2” MIP x 36”

1/2” MIP x 1/2” MIP x 36”

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 85

Gas Connectors

B

5/8” OD (1/2” ID) Yellow Coated with Fittings (cont.)

• Durable stainless steel 304

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Coated connectors add additional safety in highly corrosive environments or in areas where caustic chemicals are located

• Corrosion resistant

PART NO. DESCRIPTION

G71143 3/4” FIP x 3/4” FIP x 36”

G71144

G71145

3/4” FIP x 1/2” FIP x 36”

1/2” FIP x 1/2” FIP x 36”

G71146

G71147

G71148

G71149

G71150

G71151

G71152

G71153

G71154

G71155

G71156

G71157

G71158

G71159

G71160

G71161

G71162

G71167

G71168

G71169

G71170

G71172

G71173

G71174

G71176

G71177

G71179

1/2” FIP x 3/4” MIP x 36”

3/4” FIP x 3/4” MIP x 36”

3/4” FIP x 1/2” MIP x 36”

1/2” FIP x 1/2” MIP x 36”

3/4” MIP x 3/4” MIP x 48”

3/4” MIP x 1/2” MIP x 48”

1/2” MIP x 1/2” MIP x 48”

3/4” FIP x 3/4” FIP x 48”

3/4” FIP x 1/2” FIP x 48”

1/2” FIP x 1/2” FIP x 48”

1/2” FIP x 3/4” MIP x 48”

3/4” FIP x 3/4” MIP x 48”

3/4” FIP x 1/2” MIP x 48”

1/2” FIP x 1/2” MIP x 48”

3/4” MIP x 3/4” MIP x 60”

3/4” MIP x 1/2” MIP x 60”

1/2” MIP x 1/2” MIP x 60”

3/4” FIP x 3/4” MIP x 60”

3/4” FIP x 1/2” MIP x 60”

1/2” FIP x 1/2” MIP x 60”

3/4” MIP x 3/4” MIP x 72”

1/2” MIP x 1/2” MIP x 72”

3/4” FIP x 3/4” FIP x 72”

3/4” FIP x 1/2” FIP x 72”

1/2” FIP x 3/4” MIP x 72”

3/4” FIP x 3/4” MIP x 72”

1/2” FIP x 1/2” MIP x 72”

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/2” OD (3/8” ID) Yellow Coated with Fittings

• Durable stainless steel 304

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Coated connectors add additional safety in highly corrosive environments or in areas where caustic chemicals are located

• Corrosion resistant

G72116

G72117

G72118

G72119

G72120

G72121

G72122

G72123

G72124

G72126

G72127

G72128

G72129

G72130

G72131

G72132

G72133

G72134

G72135

G72136

G72137

G72140

G72141

G72142

G72143

G72144

PART NO. DESCRIPTION

G72100 1/2” MIP x 1/2” MIP x 12”

G72101 1/2” MIP x 3/8” MIP x 12”

G72102 3/8” MIP x 3/8” MIP x 12”

G72103 1/2” FIP x 1/2” FIP x 12”

G72104 1/2” FIP x 3/8” FIP x 12”

G72105 1/2” FIP x 1/2” MIP x 12”

G72107 3/8” FIP x 1/2” MIP x 12”

G72108 1/2” MIP x 1/2” MIP x 18”

G72109 1/2” MIP x 3/8” MIP x 18”

G72110 3/8” MIP x 3/8” MIP x 18”

G72111

G72112

G72113

G72114

G72115

1/2” FIP x 1/2” FIP x 18”

1/2” FIP x 3/8” FIP x 18”

1/2” FIP x 1/2” MIP x 18”

1/2” FIP x 3/8” MIP x 18”

3/8” FIP x 1/2” MIP x 18”

1/2” MIP x 1/2” MIP x 24”

1/2” MIP x 3/8” MIP x 24”

3/8” MIP x 3/8” MIP x 24”

1/2” FIP x 1/2” FIP x 24”

1/2” FIP x 3/8” FIP x 24”

1/2” FIP x 1/2” MIP x 24”

1/2” FIP x 3/8” MIP x 24”

3/8” FIP x 1/2” MIP x 24”

1/2” MIP x 1/2” MIP x 30”

3/8” MIP x 3/8” MIP x 30”

1/2” FIP x 1/2” FIP x 30”

1/2” FIP x 3/8” FIP x 30”

1/2” FIP x 1/2” MIP x 30”

1/2” FIP x 3/8” MIP x 30”

3/8” FIP x 1/2” MIP x 30”

1/2” MIP x 1/2” MIP x 36”

1/2” MIP x 3/8” MIP x 36”

3/8” MIP x 3/8” MIP x 36”

1/2” FIP x 1/2” FIP x 36”

1/2” FIP x 3/8” FIP x 36”

1/2” FIP x 1/2” MIP x 36”

1/2” MIP x 1/2” MIP x 48”

1/2” MIP x 3/8” MIP x 48”

3/8” MIP x 3/8” MIP x 48”

1/2” FIP x 1/2” FIP x 48”

1/2” FIP x 3/8” FIP x 48”

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

86 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

1/2” OD (3/8” ID) Yellow Coated with Fittings (cont.)

• Durable stainless steel 304

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Coated connectors add additional safety in highly corrosive environments or in areas where caustic chemicals are located

• Corrosion resistant

PART NO. DESCRIPTION

G72146 1/2” FIP x 3/8” MIP x 48”

G72147 3/8” FIP x 1/2” MIP x 48”

G72148 1/2” MIP x 1/2” MIP x 60”

G72149 1/2” MIP x 3/8” MIP x 60”

G72150 3/8” MIP x 3/8” MIP x 60”

G72151 1/2” FIP x 1/2” FIP x 60”

G72152 1/2” FIP x 3/8” FIP x 60”

G72153 1/2” FIP x 1/2” MIP x 60”

G72154 1/2” FIP x 3/8” MIP x 60”

G72155 3/8” FIP x 1/2” MIP x 60”

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

Gas Connectors

1/2” OD (3/8” ID) Black Coated

• Durable stainless steel 304

• For use with gas logs

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Coated connectors add additional safety in highly corrosive environments or in areas where caustic chemicals are located.

• Corrosion resistant

B

PART NO. DESCRIPTION

G74103 1/2” FIP x 1/2” FIP x 12”

G74105 1/2” FIP x 1/2” MIP x 12”

G74111

G74113

1/2” FIP x 1/2” FIP x 18”

1/2” FIP x 1/2” MIP x 18”

G74119 1/2” FIP x 1/2” FIP x 24”

G74121 1/2” FIP x 1/2” MIP x 24”

G74127 1/2” FIP x 1/2” FIP x 30”

G74129 1/2” FIP x 1/2” MIP x 30”

G74135 1/2” FIP x 1/2” FIP x 36”

G74137 1/2” FIP x 1/2” MIP x 36”

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1” OD (3/4” ID) Yellow Coated with Fittings

• Durable stainless steel 304

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Coated connectors add additional safety in highly corrosive environments or in areas where caustic chemicals are located

• Corrosion resistant

PART NO. DESCRIPTION

G71401 3/4” MIP x 3/4” FIP x 18”

G71402 3/4” MIP x 3/4” FIP x 24”

G76001 3/4” MIP X 3/4” MIP x 12”

G71403 3/4” MIP x 3/4” MIP x 18”

G71404 3/4” MIP x 3/4” MIP x 24”

G76041 3/4” MIP x 3/4” MIP x 36”

G76051 3/4” MIP x 3/4” MIP x 48”

G76002 3/4” FIP x 3/4” MIP x 12”

G76042 3/4” FIP x 3/4” MIP x 36”

G76052 3/4” FIP x 3/4” MIP x 48”

G76062 3/4” FIP x 3/4” MIP x 60”

G76072 3/4” FIP x 3/4” MIP x 72”

G76005 1” FIP x 1” MIP x 12”

G76015 1” FIP x 1” MIP x 18”

G76025

G76045

1” FIP x 1” MIP x 24”

1” FIP x 1” MIP x 36”

G76003 3/4” FIP x 3/4” FIP x 12”

G76013 3/4” FIP x 3/4” FIP x 18”

G76023

G76043

G76053

G76073

3/4” FIP x 3/4” FIP x 24”

3/4” FIP x 3/4” FIP x 36”

3/4” FIP x 3/4” FIP x 48”

3/4” FIP x 3/4” FIP x 72”

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/25

3/8” OD (1/4” ID) Black Coated

• Durable stainless steel 304

• For use with gas logs

• Corrugation extends all the way to the fitting for increased tubing flexibility

• CSA Design certified domestically and internationally for indoor and outdoor use

• 100% leak tested to ensure safety and quality and a product you can trust

• Quality flared end fittings to create a metal to metal seal in critical applications

• Coated connectors add additional safety in highly corrosive environments or in areas where caustic chemicals are located.

• Corrosion resistant

PART NO. DESCRIPTION

G73101 1/2” FIP x 1/2” FIP x 12”

G73108 1/2” FIP x 1/2” FIP x 18”

G73115 1/2” FIP x 1/2” FIP x 24”

G73122 1/2” FIP x 1/2” FIP x 30”

G73129 1/2” FIP x 1/2” FIP x 36”

Nominal

Connector

Series

(I.D. Inches)

1/4

3/8

1/2

Straight Length Capacity -

Ptu Per Hr (W) 0.64 Sp Gr.1000 Btu Per Cu Ft

(37.2 MJ Per Cu Meter) Gas at @ 0.5 inch Water

Cojumn (124 Pa) Pressure Drop

12”

48000

102000

180000

24”

40000

85000

150000

36”

33400

71000

125000

NOTE: When using 0.2 inch water column pressure drop, capacity can be determined by multiplying the fi gures above by 0.632.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

87

Misc. Plumbing Sprecialties

MISC. PLUMBING SPECIALTIES

Repair .................................................................................... 91-92

Test Caps & Plugs .................................................................... 92-94

Plungers ...................................................................................... 94

Flexible Transition Couplings ......................................................... 95

Dishwasher .................................................................................. 96

Washing Machine Parts ........................................................... 96-97

Dryer Vents ............................................................................. 97-98

Tape ............................................................................................ 99

Stretch Wrap ............................................................................. 100

Pipe Sleeving ............................................................................. 100

Sand Cloth ................................................................................ 100

Rubber Pipe Insulation ......................................................... 101-105

Poly Pipe Insulation.............................................................. 106-108

Insulation Tools ........................................................................... 109

Water Heater Supplies ......................................................... 109-111

Pressure Gauges ................................................................. 111-113

Themometers....................................................................... 113-114

Tubing ....................................................................................... 114

Stud Guards ....................................................................... 115-116

Stub Outs ........................................................................... 116-118

Pipe Brackets ...................................................................... 118-119

Pipe Hooks ......................................................................... 119-120

Pipe Hangers & Clamps ....................................................... 120-122

Lead Supplies...................................................................... 122-123

Roofing Repair .................................................................... 123-124

Service Sink Repair .................................................................... 124

Bolts/Screws .............................................................................. 125

Washers/Clamps/Hangers .................................................. 126-127

Water Meter Supplies ................................................................. 128

Meter Boxes ........................................................................ 129-130

Boxes ........................................................................................ 130

*Published December 2019

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

C

89

Repair

Snap-Ease Access Panel

• Constructed of high-impact white ABS

• Can be painted or wallpapered

• Easily installed to eliminate unsightly drywall repairs

• Provides for future access to plumbing or wiring behind wall

• 5/8” depth

PART NO. DESCRIPTION

A04006 6” x 9” access panel

A05008 8” x 8” access panel

A05014 14” x 14” access panel

A05027 14” x 27” access panel

Spring Loaded Plastic Access Panel

CTN/MSTR

10/80

1/10

10/30

1/6

• Quick and easy installation

• Can be painted or wallpapered

• No framing needed

• Spring loaded clips make removal simple

Malleable Iron Compression Coupling

• Long pattern

• EPDM gaskets

• Metal friction ring

• Maximum 125 PSI at 120°F

• Pipe ends must be restrained

• Fits both IPS and Schedule 40 pipe

• Galvanized for corrsion protection

PART NO.

C11050

C11075

C11100

C11125

C11150

C11200

C11250

C11300

C11400

IPS

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

4”

BODY LENGTH

3-3/8”

3-5/8”

3-7/8”

4-1/8”

4-5/16”

4-1/2”

6-3/4”

7”

8-1/8”

CTN/MSTR

1/42

1/32

1/24

1/18

1/15

1/12

1/4

1/4

1/2

C

PART NO. DESCRIPTION

A06008 8” x 8” access panel

A06014 14” x 14” access panel

Plastic Access Panel

• Beveled edges

• Indented screw holes in corners

CTN/MSTR

1/25

1/25

PART NO. DESCRIPTION

A04012 12” x 12” access panel

CTN/MSTR

1/25

Stainless Steel Repair Clamp

• Plated lug, carriage bolt and nuts for corrosion protection

• 301 stainless steel clamp with neoprene gaskets for up to 180°F

• Long neck carriage bolts for easy installation

Two Bolt One Bolt

PART NO.

DESCRIPTION IPS/SCH 40

R30375 3” one bolt

R30050 3” one bolt

R30075 3” one bolt

R30100 3” one bolt

R30125 3” one bolt

R30150 3” one bolt

R30200 3” one bolt

R30250 3” one bolt

R30300 3” one bolt

R30400

R30600

R60375

R60050

3” one bolt

3” one bolt

6” two bolt

6” two bolt

R60075

R60100

R60125

6” two bolt

6” two bolt

6” two bolt

R60150 6” two bolt

R60200 6” two bolt

R60250 6” two bolt

R60300 6” two bolt

R60400 6” two bolt

R60600 6” two bolt

1-1/2”

2”

2-1/2”

3”

4”

6”

4”

6”

3/8”

1/2”

3/4”

1”

1-1/4”

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

CTS NOM

-

-

-

-

-

-

-

-

1/2”

3/4”

1”

1-1/4”

1-1/2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

-

-

-

-

CTN/MSTR

6/36

6/36

6/24

6/24

6/24

1/20

6/24

1/36

6/36

6/36

6/36

6/36

6/36

6/72

6/72

6/72

6/72

6/72

6/72

6/72

6/48

6/36

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Bronze Compression Coupling

• EPDM gaskets

• Bronze coated brass bodies and nuts

• Maximum 125 PSI at temperatures up to 180°F

• Pipe ends must be restrained on both ends

• For use on galvanized pipe and copper tubing

• Lead Free

PVC Compression Coupling

PART NO.

C12050

C12075

C12100

C12125

C12150

C12200

C12250

C12300

C12400

C12600

PART NO.

DESCRIPTION CTS

C14205 3” length 1/2”

C14206 3” length

C14207 3” length

3/4”

1”

C15300 5” length

C15301 5” length

C15302 5” length

C15303 5” length

C15304 5” length

1/2”

3/4”

1”

1-1/4”

1-1/2”

C15305 5” length

C15306 5” length

C15307 5” length

-

2”

-

IPS

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

4”

6”

• For use on cold water lines only

• Ribbed body and nuts for gripping

• Fits IPS and Schedule 40 pipe

• EPDM gaskets

• 150 PSI at 73°F

• Pipe ends must be restrained

BODY LENGTH

3-3/4”

3-15/16”

4-3/4”

5-3/16”

5-3/8”

6”

7-7/8”

8”

12”

11-1/8”

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

IPS

3/8”

1/2”

3/4”

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

-

2”

CTN/MSTR

30/120

30/120

25/100

25/100

15/60

6/24

3/12

2/8

2/8

1/4

CTN/MSTR

12/120

12/120

12/72

12/96

12/72

12/48

12/48

12/36

12/36

12/36

12/24

91

Repair/ Test Caps and Plugs

PVC Expansion Coupling

• Rated 200 PSI

Economy Test Plug

• Galvanized steel flanges

• Fits cast iron and plastic pipe

• Neoprene rubber gasket

C

PART NO.

E09050

E09075

E09100

E09125

E09150

E09200

E09250

E09300

E09400

IPS

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

4”

BODY LENGTH

5-3/4”

6-3/4”

7-3/4”

9”

10”

10-1/2”

13”

14-1/2”

14-1/2”

CTN/MSTR

1/160

1/120

1/54

1/40

1/35

1/24

1/3

1/3

1/3

PART NO.

T31001

T31002

T31003

T31004

T31006

T31000

2”

3”

PIPE SIZE

1-1/2”

4”

6”

Replacement wing nut

CTN/MSTR

24/192

24/96

24/48

24/48

4/16

1/5000

Combination Test Plug

CPVC Compression Coupling

PART NO.

C13050

C13075

• For use on hot water lines

• 100 PSI at temperatures up to 180°F

• Tubing sizes copper and plastic tubing

• EPDM gaskets

• Ribbed body and nuts for gripping

• Pipe ends must be restrained

• NSF 61 listed

TUBING SIZE

1/2” (5/8” OD)

3/4” (7/8” OD)

CTN/MSTR

20/360

20/240

Raised Head

PART NO.

T34001

T34002

T34003

T34004

T34006

T34008

T34012

T34013

T34014

Countersunk

DESCRIPTION

1-1/2” raised head

2” raised head

3” raised head

4” raised head

6” raised head

8” raised head

2” countersunk

3” countersunk

4” countersunk

• Test up to three floors at once

• Combination test plug and cleanout

• Fits Schedule 40 DWV pipe

• Positive sealing

• No metal parts to rust

CTN/MSTR

1/392

1/288

1/200

1/128

1/54

1/24

1/288

1/200

1/128

Bronze Compression Tee

• FIP branch

• EPDM gaskets

• Pipe ends must be restrained

• Bronze coated brass bodies and nuts

• Maximum 125 PSI at temperatures up to 180°F

• For use on galvanized pipe and copper tubing (check sizes)

PART NO.

C19050

C19051

C19075

CTS

1/2”

3/4”

3/4”

IPS

3/8”

1/2”

1/2”

BRANCH

1/2” FIP

1/2” FIP

3/4” FIP

CTN/MSTR

1/112

1/96

1/96

T-Cone Cleanout Repair Plugs

• Easily repairs damaged or corroded metal or plastic cleanout threads

PVC Compression Tee

• For use on cold water lines only

• Ribbed body and nuts for gripping

• Fits both IPS and Schedule 40 pipe

• EPDM gaskets

• 150 PSI at 73°F

• Threaded branch

PART NO.

C17050

C17075

C17100

C17125

C17150

C17200

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

25/100

15/90

15/60

1/40

1/30

1/20

PART NO.

T34150

T34200

T34300

T34350

T34400

PIPE SIZE

1-1/2”

2”

3”

3-1/2”

4”

THREAD ID

1.780

2.255

3.375

3.900

4.336

CTN/MSTR

1/50

1/50

1/50

1/50

1/50

“Plum-Tite” Mechanical Test Plugs

• High density plastic construction

• Neoprene gasket

• Extra large wingnut

• Rust and corrosion proof

PART NO.

T37001

T37002

T37003

T37004

T37006

T37008

6”

8”

3”

4”

PIPE SIZE

1-1/2”

2”

CTN/MSTR

10/200

10/150

10/40

10/40

5/20

5/10

92

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Cast Iron Test Plug

• Maximum 10 PSI

• To test cast iron soil pipe drainage systems

• Cold water ONLY

PART NO.

T39002

T39003

T39004

T39006

T39008

T39010

T39012

6”

8”

10”

12”

3”

4”

PIPE SIZE

2”

CTN/MSTR

1/40

1/20

1/12

1/6

1/2

1/2

1/1

Flexible PVC Test Cap

• Reinforced top

• 5/16” hex screw with screwdriver slot

• Fits both cast iron and plastic pipe

PART NO.

T32001

T32002

T32003

T32004

T32006

T32008

T32011

T32022

T32033

T32044

PIPE SIZE

1-1/2” standard

2” standard

3” standard

4” standard

6” standard

8” standard

1-1/2” heavy duty

2” heavy duty

3” heavy duty

4” heavy duty

CTN/MSTR

20/160

24/288

24/144

1/50

1/24

1/16

1/200

1/100

1/50

1/50

PVC Dual Fit Test Cap

• Each cap fits two sizes of Schedule 40 pipe

• CARTON QUANTITIES ONLY

PART NO.

T33152

T33304

PIPE SIZE

1-1/2” and 2”

3” and 4”

CTN/MSTR

100/100

25/25

Slip-On Plastic Cap

• DWV protection cap

• Protects from debris during construction

• Orange

PART NO.

T36150

T36200

T36300

T36400

T36600

3”

4”

6”

PIPE SIZE

1-1/2”

2”

CTN/MSTR

1/300

1/200

1/75

1/45

1/25

Test Caps and Plugs

Techno Test Cap

• Heavy duty PVC, high pressure tested over six stories

• Easily solvent cemented over end of DWV pipe

• Will not clog or go down pipe

• CARTON QUANTITIES ONLY

PART NO.

T35001

T35002

T35003

T35004

PIPE SIZE

1-1/2” DWV

2” DWV

3” DWV

4” DWV

CTN/MSTR

100/100

100/100

50/50

25/25

PVC Test Cap

• Easily solvent cemented over end of DWV pipe

• CARTON QUANTITIES ONLY

C

PART NO.

T35201

T35202

T35203

T35204

T35206

PIPE SIZE

1-1/2” PVC

2” PVC

3” PVC

4” PVC

6” PVC

Knockout Test Cap

PART NO.

T33001

T33002

T33003

T33004

• For use in plastic waste and drain pipe

• Disposable

• CARTON QUANTITIES ONLY

2”

3”

PIPE SIZE

1-1/2”

4”

CTN/MSTR

100/1000

100/1000

50/250

25/250

10/100

CTN/MSTR

100/5000

100/5000

50/2400

50/1200

Pneumatic Test Plug

Regular Long

• All units smaller than 8” are supplied with chain and ring

• All units 8” or larger are supplied with a removable eye bolt

• For use with cast iron, PVC, ABS, copper, clay and concrete pipe

• Made in the USA

Regular

PART NO.

T45600

T45800

T45010

T45012

Long - 23”

NOM. PIPE

SIZE

6”

8”

10”

12”

MAX AIR

PRESSURE

25 PSI

25 PSI

25 PSI

25 PSI

MAX TEST

PRESSURE

5 PSI

15 PSI

15 PSI

15 PSI

MAX HEAD

30’

40’

40’

40’

CTN/MSTR

1/1

1/1

1/1

1/1

PART NO.

T46200

T46300

T46400

NOM. PIPE

SIZE

2”

3”

4”

MAX AIR

PRESSURE

45 PSI

35 PSI

30 PSI

MAX TEST

PRESSURE

5 PSI

5 PSI

5 PSI

MAX HEAD

30’

30’

30’

CTN/MSTR

1/1

1/1

1/1

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 93

Test Caps and Plugs/Plungers

C

Pneumatic Test Plug with Chain

• Compact design allows easy access, even in a cleanout tee

• Pressure relief has no moving parts to fail or malfunction

• Rubber body is molded as one-piece with no seams or bonded parts

• Pressure exhausts out of the top of the plug not into test area

• Works in place of “standard” pneumatic plugs

• Multiple sealing ribs in the center portion of the plug for positive sealing

• Made in the USA

PART NO.

T45151

T45201

T45301

T45401

PIPE SIZE

1.10” – 1.75”

1.75” – 2.25”

2.25” – 3.25”

3.25”– 4.25”

CTN/MSTR

1/12

1/12

1/12

1/12

Drain King ®

D18501 D18186 D18034

D18750

• Insert in drain line opening and turn water on

• Automatically seals drain and powerful water pulses loosen and clear drain

• Brass on each end

D18340

PART NO. PIPE SIZE

D18501 1”– 2”

D18186 1-1/2”– 3”

D18034 3”– 4”

D18750 3”– 6”

D18850 6”– 10”

D18340

1-1/2”– 3” with 10” hose and faucet adapter

D18060 Drain adapter

DK NO.

D501

D186

H34

D750

D850

PE60

PE60

CTN/MSTR

1/12

12/144

1/6

1/6

1/1

1/12

1/12

Pneumatic-Hydraulic Test Plug

• Uses either water or air

• Temperature range 30° - 200°F

• User safe; cannot be overinflated

• Individually tested for 24 hours to insure proper operation

• Using water, stack can be filled and plugged from same position

• Made in the USA

PART NO.

T30002

T30034

T30046

T30068

T30102

PIPE SIZE

1-1/4” – 2”

3 – 4”

4 – 6”

5”– 8”

10”– 12”

MFG PART NO.

WATP 2

WATP 3-4

WATP 4-6

WATP 6-8

WATP 10-12

CTN/MSTR

1/6

1/10

1/1

1/1

1/1

Plumbjet

D18400

PART NO. PIPE SIZE

D18400 1”– 2”

D18401 1-1/2”– 3”

D18401

• Attaches to garden hose

• All natural

• Environmentally safe

DK NO.

D501

D186

CTN/MSTR

10/60

10/60

Two Stage Long Test Plug

• Two stage deflation allows access pipe to remain sealed while water clears drain line

Extension Hose

• For pneumatic test plug

• Can be used in tandem

PART NO.

T30203

T30304

PIPE SIZE

2”– 3”

3”– 4”

MFG PART NO.

DDO203

DDO304

CTN/MSTR

1/1

1/1

PART NO. DESCRIPTION

T45002 2’ extension hose

T45003 3’ extension hose

CTN/MSTR

1/6

1/6

Inflatable Tee Plug

Inflated Test Plug

PART NO. DESCRIPTION

T33200

T33300

T33400

2” inflatable tee plug

3” inflatable tee plug

4” inflatable tee plug

• Body is high quality natural rubber

• Top is made from high impact ABS plastic

• Threads directly into test tee

• Threads into both cast iron and plastic pipe

CTN/MSTR

6/36

1/6

1/6

Force Cup Plunger

• Highest quality rubber

• Supplied with handle

Red Rubber Black Rubber

PART NO. DESCRIPTION

D18001

D18002

5 1/2” diameter (red rubber)

6” professional style (black rubber)

CTN/MSTR

1/48

1/24

Professional Force Cup Display

• Highest quality rubber

• Supplied with handle

• Attractive point of purchase display

• Display box contains 30 rubber plungers

• CARTON QUANTITIES ONLY

Display

PART NO. DESCRIPTION

D18000 Rubber plungers and display box

CTN/MSTR

30/30

94 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Toilet Plunger

Flexible Transition Couplings

Flexible Trap Drain Connector

D18020 D18021

• Professional quality

• Yellow hardwood handles with black tailpiece

PART NO. DESCRIPTION

D18020 Thronemaster® professional stepped plunger

D18021

D18022

Professional plumber’s plunger

HYDRO-TRUST heavy duty deluxe plunger

Qwik Tee

PART NO. DESCRIPTION

T07150

T07200

T07300

T07400

1-1/2” x 1-1/2” x 1-1/2” tee

2” x 2” x 2” tee

3” x 3” x 3” tee

4” x 4” x 4” tee

Qwik Elbow

• Flexible

PART NO. DESCRIPTION

E10150

E10200

1-1/2” x 1-1/2” elbow

2” x 2” elbow

E10300

E10400

3” x 3” elbow

4” x 4” elbow

Flexible PVC Saddle Fitting

Tee Pattern

Tee Pattern

Wye Pattern

• Provided with stainless steel clamp on inlet

• Includes stainless steel clamps on saddle to fit up to

12” clay pipe

• Extension clamps may be used for larger pipe sizes

PART NO. DESCRIPTION

S26001

6” plastic-12” clay saddle x 4” Sch.40 CI or SDR35 inlet

S26002

6” plastic - 12” clay saddle x 6” Sch.40 CI or

SDR35 inlet

Wye Pattern

CTN/MSTR

1/1

1/1

PART NO. DESCRIPTION

S27001

S27002

6” plastic - 12” clay saddle x 4” Sch. 40 cast iron or

SDR35 inlet

6” plastic - 12” clay saddle x 6” Sch. 40 cast iron or

SDR35 inlet

Replacement Clamp

CTN/MSTR

1/1

1/1

PART NO. DESCRIPTION

S26100 4”-12” gear clamp

CTN/MSTR

1/100

D18022

CTN/MSTR

1/4

1/12

1/24

CTN/MSTR

1/50

1/20

1/20

1/6

CTN/MSTR

1/50

1/20

1/20

1/6

PART NO. DESCRIPTION

T06001

T06002

T06003

Connects 1-1/4” – 1 1/2” tubular to

1-1/4” – 1-1/2” tubular

Connects 1-1/4” DWV or 1-1/2” CTS to

1-1/4” – 1-1/2” tubular

Connects 1-1/2” DWV or CTS to

1-1/4” – 1-1/2” tubular

T06004 Connects 2” DWV to 1-1/4” – 1-1/2” tubular

CTN/MSTR

1/180

1/100

1/100

1/100

Flexible Transition Coupling

T06320 T06400

PART NO. DESCRIPTION

T06025 1-1/4” PL + CI to PL + CI

T06050

T06024

T06200

T06250

1-1/2” PL + CI to PL + CI

1-1/2” x 1-1/4” PL + CI to PL + CI

2” PL + CI to PL + CI

2” x 1-1/2” PL + CI to PL + CI

T06300

T06320

3” PL + CI to PL + CI

3” x 2” PL + CI to PL + CI

T06400 4” PL + CI to PL + CI

T06430 4” x 3” PL + CI to PL + CI

T06600

T06640

T06800

6” PL + CI to PL + CI

6” x 4” PL + CI to PL + CI

8” PL + CI to PL + CI

• Flexible PVC

• For use on PVC, DWV and CI pipe

• Stainless steel clamps and housing

• UPC listed

CTN/MSTR

1/300

1/150

1/100

1/105

1/105

1/60

1/80

1/36

1/44

1/12

1/15

1/6

C

Bore O-Ring

PART NO. DESCRIPTION

B12640 6” bore x 4” plastic or cast iron

PART NO. DESCRIPTION

B12210 2” x 1-1/2” bushing

B12320 3” x 2” bushing

B12430 4” x 3” bushing

CTN/MSTR

1/60

Bushing for Qwik Tees and Qwik Elbows

CTN/MSTR

1/24

1/24

1/24

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 95

Dishwasher/Washing Machine Parts

Dishwasher Hose Center Outlet Washing Machine Boxes

PART NO.

D10626

D10876

SIZ

• New softer formulation

• Resists deformation during storage

• Single spiral reinforcement

• Connects dishwasher pump to air gap inlet or dishwasher tailpiece

• Resists kinking

• Marked per foot

• 14°F to 180°F

• IAPMO/UPC listed; meets ANSI, AHAM-DWI specifications

5/8” ID x 50’

7/8” ID x 50’

BURST

PRESSURE

200 PSI

100 PSI

C

Dishwasher Drain Connector

WORKING

PRESSURE CTN/MSTR

90 PSI 1/1

70 PSI 1/1

• 410 Stainless steel clamps

• Includes two worm gear clamps

PART NO. DESCRIPTION

D10001 Universal connector

Icemaker Boxes with Valves

CTN/MSTR

50/200

• All valves are quarter turn

• Easy to remove test plug

• Can be adapted to side outlet

if needed

• IAPMO listed

Without Water Hammer Arrester

PART NO. DESCRIPTION

B05940 1/2" MIP/SWEAT

B05941 1/2" CPVC

B05942 1/2" PEX

B05943 3/8" PEX

B05944 1/2" crimp style PEX

With Water Hammer Arrester

PART NO. DESCRIPTION

B05946 1/2" MIP/SWEAT

B05947

B05948

1/2" CPVC

1/2" PEX

B05949

B05950

3/8" PEX

1/2" crimp style PEX

Replacement Frame

PART NO. DESCRIPTION

B05927 Replacement frame for washing machine box

CTN/MSTR

1/6

1/6

1/6

1/6

1/6

CTN/MSTR

1/6

1/6

1/6

1/6

1/6

• Includes two fixed nails for installation

• Blue handle valves

• UPC listed

• IAPMO listed

CTN/MSTR

1/1

Hose Grip Clothes Washer Connector

Flexible Drain Trap

Right Outlet Washing Machine Boxes

96

PART NO. DESCRIPTION

B05910LF with MIP/SWT connection

B05911LF with Flowguard all CPVC icemaker connection

B05913LF with 1/2” PEX connection

B05914LF with 1/2” crimp style PEX connection

B05925LF with MIP/SWT connection and WHA

B05926LF with CPVC connection and WHA

B05931LF with 1/2” PEX connection and WHA

B05932LF with 1/2” crimp style PEX connection and WHA

Replacement Frame

PART NO. DESCRIPTION

B05928 Replacement frame for icemaker box

• Fits 1-1/2” or 2” standpipe

• Fits 1” – 1-7/16” drain hose

• Securely holds drain hose in standpipe

PART NO. DESCRIPTION

D08001 Drain hose connector

• J-bend

PART NO. DESCRIPTION

J01001 1-1/4” or 1-1/2” tubular trap j-bend

CTN/MSTR

1/10

1/10

1/12

1/12

1/10

1/10

1/12

1/12

CTN/MSTR

1/1

CTN/MSTR

1/100

CTN/MSTR

1/20

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

• All valves are quarter turn

• Easy to remove test plug

• IAPMO listed

Without Water Hammer Arrester

PART NO. DESCRIPTION

B05740 1/2" MIP/SWEAT

B05741 1/2" CPVC

B05742 1/2" PEX

B05743 3/8" PEX

B05744 1/2" crimp style PEX

B05751 Single Lever, 1/2" MIP/SWT

B05752 Single Lever, 1/2" CPVC

B05753 Single Lever, 1/2" PEX

B05754 Single Lever, 3/8" PEX

B05755 Single Lever, 1/2" crimp style PEX

With Water Hammer Arrester

PART NO. DESCRIPTION

B05746 1/2" MIP/SWEAT

B05747

B05748

1/2" CPVC

1/2" PEX

B05749

B05750

3/8" PEX

1/2" crimp style PEX

B05756 Single Lever, 1/2" MIP/SWT

B05757 Single Lever, 1/2" CPVC

B05758

B05759

Single Lever, 1/2" PEX

Single Lever, 3/8" PEX

B05760 Single Lever, 1/2" crimp style PEX

Replacement Frame

PART NO. DESCRIPTION

B05927 Replacement frame for washing machine box

CTN/MSTR

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

CTN/MSTR

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

CTN/MSTR

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Washing Machine Parts/Dryer Vents

Left Outlet Washing Machine Boxes Mixer Hose

• All valves are quarter turn

• Easy to remove test plug

• IAPMO listed

• High pressure hose; 12” arms

• Individually bagged

Without Water Hammer Arrester

PART NO. DESCRIPTION

B05840 1/2" MIP/SWEAT

B05841 1/2" CPVC

B05842 1/2" PEX

B05843 3/8" PEX

B05844 1/2" crimp style PEX

B05851 Single Lever, 1/2" MIP/SWT

B05852 Single Lever, 1/2" CPVC

B05853 Single Lever, 1/2" PEX

B05854 Single Lever, 3/8" PEX

B05855 Single Lever, 1/2" crimp style PEX

With Water Hammer Arrester

PART NO. DESCRIPTION

B05845

B05847

B05848

B05849

1/2" MIP/SWEAT

1/2" CPVC

1/2" PEX

3/8" PEX

B05850 1/2" crimp style PEX

B05856 Single Lever, 1/2" MIP/SWT

B05857 Single Lever, 1/2" CPVC

B05858 Single Lever, 1/2" PEX

B05859 Single Lever, 3/8" PEX

B05860 Single Lever, 1/2" crimp Style PEX

Replacement Frame

PART NO. DESCRIPTION

B05927 Replacement frame for washing machine box

CTN/MSTR

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

CTN/MSTR

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

PART NO. DESCRIPTION

J04012 Mixer hose

Steam Dryer Wye

• 3 size step down 3/4”, 7/8” and 1” for drain lines

• Individually bagged

PART NO. DESCRIPTION

J04016 5’ fit-all drain hose

Washing Machine Pan

CTN/MSTR

1/25

• 3-way male garden hose wye for steam dryer hook-up

• Allows a washing machine water supply to be easily split for supplying both the washing machine and a dryer with a steam function

• Can be used along with a female X female washing machine hose anywhere a hose bib or sill cock must be split into two

• Chrome plated die cast zinc suitable for use both outdoors and indoors

PART NO. DESCRIPTION

G20200 3/4” MHT x 3/4” MHT x 3/4” MHT wye

CTN/MSTR

20/200

Fit-All Drain Hose for Washing Machine

CTN/MSTR

1/12

C

CTN/MSTR

1/1

• 2-1/2” deep heavy gauge plastic pan

• White

• 1” adapter

• CARTON QUANTITIES ONLY

Washing Machine Hose

Straight Female With 90° Elbow

PART NO. DESCRIPTION

J04104

J04105

J04106

J04004

J04005

J04006

4’ with 90° elbow

5’ with 90° elbow

6’ with 90° elbow

4’ straight female

5’ straight female

6’ straight female

• 3/8” ID rubber for hot or cold use

• Standard female hose threads

• Bursting pressure 800 lbs. per sq. inch

• Bagged with washers

CTN/MSTR

1/12

1/12

1/12

1/12

1/12

1/12

PART NO. DESCRIPTION

J04250 27” x 29” with side mount drain

Dryer Vent Hood

• PVC hood

• Weather proof 12” aluminum extension

• Pre-punched mounting holes

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

D04012 4” dryer vent hood

Washing Machine Hose

• Industrial quality

• 1/2” ID EPDM rubber for hot and cold use

• Polyester yarn reinforcement

• 3/4” female hose ends

• Temp. rating -40°F to +190°F

• 200 PSI working pressure

• Bagged with washers

PART NO. DESCRIPTION

J04204

J04205

J04206

4’ washing machine hose

5’ washing machine hose

6’ washing machine hose

CTN/MSTR

1/12

1/12

1/12

Aluminum Vent Hood

• For clothes dryers or exhaust fans

• Complete with damper and flange plate

PART NO. DESCRIPTION

D04023 3” aluminum vent hood

D04024 4” aluminum vent hood

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

1/5

CTN/MSTR

1/12

CTN/MSTR

1/12

1/12

97

Dryer Vents

Louvered Dryer Vent Hood

• Includes hood, aluminum pipe and collar

Indoor Dryer Vent Kit

• Use on electric clothes dryers when outside venting is not possible

• Recirculates warm, moist air

• Specially designed lint reservoir

PART NO. DESCRIPTION

D04025 4” white hood assembly

D04026 4” brown hood assembly

CTN/MSTR

1/12

1/12

C

Complete Dryer Vent Kit

• Kit includes hose, vent and

2 plastic clamps

• PVC hood

• Weather proof 12” aluminum extension

• Pre-punched mounting holes

• 12” aluminum extension, pre-punched mounting holes

PART NO. DESCRIPTION

D04005 4” x 5’ vent kit

D04008 4” x 8’ vent kit

D04009

4” x 8’ flex aluminum duct with louvered hood and two metal clamps

D04010 4” clamp only

CTN/MSTR

1/10

1/10

1/6

1/10

Metal Clamp for Dryer Vent

• Heavy duty all metal design

• Excellent for use with metal ducting

PART NO. DESCRIPTION

D04015 3” metal clamp

D04016 4” metal clamp

D04017 5” metal clamp

D04018 6” metal clamp

Aluminum Elbow and Pipe

• All aluminum

CTN/MSTR

10/50

10/50

10/50

10/50

PART NO. DESCRIPTION

D04036 Indoor dryer vent kit

Flexible Aluminum Ducting

• Ideal for exhausting clothes dryers

• Bendable to any configuration

• No fire or UL ratings

PART NO. DESCRIPTION

D04031 3” x 8’ aluminum ducting

D04032 4” x 8’ aluminum ducting

D04033 5” x 8 aluminum ducting

D04034 6” x 8’ aluminum ducting

D04053 3” x 25’ aluminum ducting

.

D04054 4” x 25’ aluminum ducting

Proflex Aluminum Foil Ducting

• Flexible, fire resistant

• Will not support combustion

• Wire reinforced

PART NO. DESCRIPTION

D04058 4” x 5’ Proflex aluminum foil ducting

D04059 4” x 8’ Proflex aluminum foil ducting

D04060 4” x 50’ Proflex aluminum foil ducting

CTN/MSTR

1/6

CTN/MSTR

1/14

1/9

1/6

1/3

1/10

1/6

CTN/MSTR

1/12

1/12

1/1

PART NO. DESCRIPTION

D04013 3” x 90° swivel elbow

D04014 3” x 24” aluminum pipe

D04027 4” x 90° swivel elbow

D04028 4” x 24” aluminum pipe

Flexible Duct Connector Kit

• Connects flexible ducting

• Extends exhaust collar of clothes dryer

CTN/MSTR

1/12

1/25

1/12

1/25

Flexible Aluminum Foil Ducting

• Ideal for exhausting clothes dryers and bathroom fans

• Will not support combustion

• No fire or UL ratings

PART NO. DESCRIPTION

D04056 4” x 25’ aluminum foil ducting

D04057 4” x 8’ aluminum foil ducting

CTN/MSTR

1/1

1/12

Dryer Vent Hose

• Wire-reinforced vinyl

PART NO. DESCRIPTION

D04020 4” x 20’ (boxed)

D04051 4” x 5’ (bagged)

CTN/MSTR

1/5

1/12

PART NO. DESCRIPTION

D04019 4” duct connector kit

CTN/MSTR

1/6

Increaser/Reducer

• Connects 3” to 4” ducting or 4” ducting to 3” exhaust collar

Dryer Vent Kit with Louvered Hood

• Includes vinyl hose, aluminum pipe, collar, clamps and louvered hood

98

PART NO. DESCRIPTION

D04021 3”-4” plastic increaser/reducer

D04022 4”-3” aluminum reducer

CTN/MSTR

1/6

1/6

PART NO. DESCRIPTION

D04001 4” x 5’ with white hood

D04002 4” x 5’ with brown hood

D04003 4” x 8’ with white hood

D04004 4” x 8’ with brown hood

CTN/MSTR

1/10

1/10

1/10

1/10

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Bathroom Fan Vent Kit

• Contains the following parts for 3” and 4” wall type exhaust fans: 4” x 5’ flexible vinyl ducting, clamps, 4” louvered vent,

3”-4” foam increaser

Duct Tape

• Premium grade, waterproof non-elastic reinforced cloth

• Pressure sensitive; vapor and flame resistant

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

T20020 2” x 60 yds (gray)

T20023 2” x 60 yds (black)

THICKNESS

8.5 mil.

10 mil.

CTN/MSTR

24/24

24/24

Tape

PART NO. DESCRIPTION

D04035 Bathroom fan vent kit

D04050

D04062

4” x 50’ vinyl hose only (boxed)

3” x 50’ vinyl hose only (boxed)

CTN/MSTR

1/10

1/1

1/1

Domestic Pipe Wrap Tape

• Both sides have adhesive

• CARTON QUANTITIES ONLY

PART NO.

COLOR

T16002

T16004

Yellow

Yellow

SIZE

2” x 100’

4” x 100’

T17002

T17004

Black

Black

2” x 100’

4” x 100’

THICKNESS

12 mil.

12 mil.

12 mil.

12 mil.

CTN/MSTR

24/24

12/12

24/24

12/12

PTFE Thread Seal Tape

• Thickness 3 mil. plus

• Temperature range is 500°F to +650°F

• Withstands pressure up to 5000 PSI

PART NO. DESCRIPTION

T19122

T19125

1/2” x 260” thread seal tape

1/2” x 520” thread seal tape

T19342

T19345

3/4” x 260” thread seal tape

3/4” x 520” thread seal tape

CTN/MSTR

100/500

100/500

100/500

100/500

Imported Pipe Wrap Tape

• Black tape with PVC backing

• UPC listed

• CARTON QUANTITIES ONLY

PART NO.

T17101

T17102

T17104

T18201

T18202

SIZE

1” x 100’

2” x 100’

4” x 100’

1” x 100’

2” x 100’

PART NO. DESCRIPTION

T16100 Quart

THICKNESS

10 mil.

10 mil.

10 mil.

20 mil.

20 mil.

Primer for Pipe Wrap Tape

CTN/MSTR

48/48

24/24

12/12

48/48

24/24

• Maximizes tape performance

• Final step in preparing steel surfaces for taping

• Can more than double adhesion of corrosion tapes to cleaned steel

• CARTON QUANTITIES ONLY

• MOTOR FREIGHT ONLY / FLAMMABLE

CTN/MSTR

12/12

Thread Seal Tape Jar Display

PART NO. DESCRIPTION

CJ1002 1/2” x 260” Teflon™ tape

• Withstands pressure up to 5000

PSI

• Temperatures to +650°F

• Thickness 3 mil. plus

CTN/MSTR

1/1

PTFE Yellow Gas Line Thread Seal Tape

• 0035 mil.

• Temperature range is -450°F to +500°F

• Withstands pressure up to 5000 PSI

• Meets U.S. government military specification MIL-T27730A

• UL listed

PART NO. DESCRIPTION

T19222 1/2” x 260” thread seal tape

CTN/MSTR

100/500

Box Sealing Tape

C

Electrical Tape

• Black vinyl

• Individually wrapped

• UL listed

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

T20030 3/4” x 60’ electrical tape

CTN/MSTR

10/250

PART NO. DESCRIPTION

T20040 2” x 55 yds

T20041

T20050

2” x 110 yds

Dispenser only

CTN/MSTR

1/36

1/36

1/24

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 99

Stretch Wrap/Pipe Sleeving/Sand Cloth

Stretch Wrap

C

FREE

DISPENSER

INCLUDED

• Use instead of tape to bind packages or parts

• Protects products from dirt and moisture

• Can be used on palleted shipments or small orders

• Great for wrapping lengths of pipe

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

S51120

S51080

3” x 700’

3” x 1000’

GAUGE

120

80

CTN/MSTR

18/18

18/18

Stretch Wrap Film and Dispenser

• Secures packages to pallets

• Reduces lost packages

• Retards moisture

• Lowers handling costs

• Wrapping is priced per carton - no broken cartons

PART NO. DESCRIPTION

S51001 80 gauge wrap 18” x 1500’ (4 rolls)

S51002 Hand dispenser only

CTN/MSTR

1/1

1/1

Open Mesh

• Dispenser box

• 100% waterproof

• Polyester on both sides

• 180 grit with large holes for aggressive sanding

• Can be exposed to water and solvents indefinitely without breakdown

PART NO. DESCRIPTION

C25010 1-1/2” x 5 yds

C25011 1-1/2” x 10 yds

CTN/MSTR

1/50

1/50

Flexible Open Mesh

• Dispenser box

• 100% waterproof

• Polyester on both sides

• 180 grit

• Smaller holes for finer sanding

PART NO. DESCRIPTION

C25012 1-1/2” x 5 yds

C25013 1-1/2” x 10 yds

Pipe Sleeving

• Made of polyethylene material

• Underground sleeving protects against lime reaction in concrete

• Allows expansion and contraction of pipe, minimizing stress

• Individually boxed; color-coded (red for hot, blue for cold)

• IAPMO listed

PART NO.

S22001

S22002

S22003

S22004

S22005

S22006

PIPE SIZE

1/2”-1”

1/2”-1”

1/2”-1”

1/2”-1”

1/2”-1”

1/2”-1”

THICKNESS COLOR LENGTH CTN/MSTR

6 mil

6 mil

Red

Blue

200’

200’

1/20

1/20

10 mil

10 mil

25 mil

25 mil

Red

Blue

Red

Blue

100’

100’

100’

100’

1/20

1/20

1/20

1/20

Waterproof Aluminum Oxide

• Dispenser box

• 100% waterproof

• Wet cut

• 120 grit

PART NO. DESCRIPTION

C25020 1-1/2” x 5 yds

C25021 1-1/2” x 10 yds

C25022 1-1/2” x 25 yds

CTN/MSTR

1/50

1/50

CTN/MSTR

1/50

1/50

1/25

Water Resistant Sand Cloth

• Dispenser box

• Water resistant aluminum oxide

• 120 grit abrasive cloth for cleaning pipe and fittings

PART NO. DESCRIPTION

C25000 1-1/2” x 2 yds

C25001 1-1/2” x 5 yds

C25002 1-1/2” x 10 yds

C25003 1-1/2” x 25 yds

CTN/MSTR

1/50

1/50

1/50

1/25

100 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Rubber Pipe Insulation

Rubber Pipe Insulation

CLOSED CELL FLEXIBLE ELASTOMERIC

FOAM INSULATION

*Excludes Titan(TM) Insulation Tubes and Rubber Insulation Rolls.

See our website for specifications and certifications on these products.

DESCRIPTION

Rubber pipe insulation is an NBR/PVC based closed cell, flexible elastomeric foam insulation. It is environmentally friendly as it is free of CFCs, HFCs,

HCFCs, PBDEs, formaldehyde and fibers. An EPA-registered antimicrobial agent is incorporated into the product providing additional protection against mold, fungal and bacterial growth. It is UL GREENGUARD® Gold

Certified for low VOC emissions. The product’s key physical properties are approved by Factory Mutual.

APPLICATION

Rubber pipe insulation is recommended for applications with service temperatures ranging from -297°F (-182°C) to +220°F (+104°C). For applications below -40°F (-40°C), contact us for support. The product is used to retard heat gain and prevent condensation or frost formation on below-ambient applications, including refrigerant, cold water plumbing, chilled water, and industrial process lines, among others. It can be used with heat tracing tapes. It also retards heat loss from medium hot systems, including hot water plumbing, liquid heating, dual temperature, and solar thermal piping, among others.

OUTDOOR APPLICATION

Rubber pipe insulation is made from a UVresistant elastomeric blend. For severe UV exposure (rooftop applications) or for optimum performance, protective coating or approved jacketing is recommended.

UNDERGROUND APPLICATIONS

Rubber pipe insulation is acceptable for use in buried applications using the same installation principles as above ground applications. For lines above the water table, use a clean fill such as sand (3”-5” layer) to protect the insulation before backfilling.

For optimum performance, the lines should be encased in a conduit to protect them from problems associated with ground water intrusion and compaction. If a conduit is not used, the insulation thickness should be increased by one thickness size to compensate for compaction.

INSTALLATIONS

Rubber pipe insulation is flexible

(even at low temperatures), durable

(nonfracturing and skin is resistant to tearing from handling and environment), safe to handle (non-dusting and non-abrasive), and lightweight for an efficient installation. It is recommended that insulation is installed on non-operational systems with clean, dry surfaces in ambient conditions between 40°F and 100°F.

Properly sized insulation tubing can be slid over piping (tubing should be pushed, not pulled) or, when applied to existing lines, can be slit lengthwise (using a sharp, non-serrated knife) and fitted into place. All seams, butt joints, termination points and open ends should be sealed with an approved contact adhesive, making sure both surfaces to be joined are coated. Longitudinal seams should face downward and vapor stops should be installed as needed.

Fittings (elbows, tees, p-traps) can be field fabricated from insulation tubes.

ASTM C1710, Installation Guide for

Flexible Closed Cell Foams should be used as comprehensive installation guides.

RESISTANCE TO

MOISTURE VAPOR FLOW

The expanded closed cell structure and unique formulation inherently resists moisture vapor intrusion and is considered a Class 1 vapor retarder per ASHRAE. For most indoor applications, rubber pipe insulation needs no additional protection. Additional vapor barrier protection may be necessary when installed on cold surfaces that are exposed to continuous high humidity.

FLAME AND SMOKE RATING

Rubber pipe insulation in wall thicknesses of 2” (50 mm) and below has a flame spread rating of 25 or less and a smoke development rating of 50 or less as tested to ASTM E84, “Surface

Burning Characteristics of Building

Materials”. It is acceptable for duct/ plenum applications, meeting the requirements of NFPA 90A/B. Numerical flammability ratings alone may not define the performance of products

SPECIFICATION COMPLIANCE under actual fire conditions. They are provided only for use in the selection of products to meet limits specified when compared to a known standard.

• USDA Compliant

• CFIA Compliant

• RoHS Compliant

• UL 94-5V Flammability Classification

(#E300774)

• ASTM E84 25/50-rated (to 2”) - tested

to UL 723, NFPA 255 and CAN/ULC

S102-03

• FMVSS 302

• FAR 25.853

• FMRC Approval Guide: Chapter 14

Pipe Insulation

• NFPA No. 101 Class A Rating

• NFPA 90A, 90B

• MIL-P-15280, Form T

• Meets requirements of California ECB

Title 24

• UL GREENGUARD® Gold Certified

• Meets energy code requirements of

ASHRAE 90.1and 189.1

C

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 101

Rubber Pipe Insulation

C

RUBBER PIPE INSULATION TECHNICAL DATA

 Physical properties 

Thermal Conductivity (K) 90°F (32°C) Mean Temp

BTU - in/hr - Ft 2 - °F (W/mK) 75°F (24°C) Mean Temp

32°F (0°C) Mean Temp

Density

Operating Temperature Range

Water Vapor Permeability (Dry Cup)

Water Absorption (Volume Change)

Flame Spread / Smoke Development (up to 2” wall)

Dimensional Stability

Hot Surface Performance (250°F for 96 hours)

Ozone Resistance

Odor Emissions

Chemical/Solvent/Oil/Grease Resistance

Flexibility

Mildew Growth Resistance/Air Erosion

Corrosion Risk

Leachable Chlorides

UV / Weather Resistance 1

Sound Transmission Class (1”)

*For applications below -40°F (-40°C), contact us for technical support.

1 Outdoor applications should be protected with an approved coating.

 Rubber Pipe Insulation 

0.258 (0.0372)

0.245 (0.0353)

0.235 (0.0339)

3-6 lb/ft 3

-297°F* (-183°C) to +220°F (+104°C)

<0.01 perm-in

0%

<25/50

<7% Linear Shrinkage

No Cracking or Delamination

Pass

No Objectionable Odor

Good

Excellent

Pass: Cold Crack Test at -40°F (-40°C)

Pass pH neutral: 6.6±0.04

<0.05% water-soluble chloride ions

Pass

13

 Test methods 

ASTM C 177

ASTM D 1667

ASTM C534

ASTM E96

ASTM C209

ASTM E84

ASTM C534

ASTM C411

ASTM D1171

ASTM C1304

Compatibility Data Available on Request

ASTM C534

ASTM D1056

UL 181, ASTM G21

DIN 1988

DIN 1988

QUV Chamber Test

ASTM E90

RUBBER PIPE INSULATION THICKNESS RECOMMENDATIONS - TO PREVENT CONDENSATION

SERVICE

TEMPERATURE

50°F (10°C) 35°F (2°C) 0°F (-18°C)

 Pipe Size 

3/8” ID to 1-1/8” ID

1-3/8” ID to 3” IPS

4” IPS to 8” IPS

-20°F (-29°C)

 Mild   Normal   Severe   Mild   Normal   Severe   Mild   Normal   Severe   Mild   Normal   Severe 

3/8”

3/8”

1/2”

3/8”

3/8”

1/2”

3/4”

3/4”

3/4”

3/8”

3/8”

1/2”

1/2”

3/4”

3/4”

3/4”

1”

1”

1/2”

1/2”

3/4”

3/4”

1”

1”

1-1/2”

1-1/2”

2”

1/2”

3/4”

3/4”

1”

1-1/2”

1-1/2”

1-1/2”

1-1/2”

2” excessive moisture is introduced or in poorly ventilated areas where the temperature may be depressed below the ambient: 90°F and 80% R.H.

RUBBER PIPE INSULATION PIPE “R” VALUES PER SQUARE FOOT (ALL SIZES ARE NOMINAL)

Nominal

 insulation I.D.   3/8” WALL   1/2” WALL   3/4” WALL   1” WALL   1-1/2” WALL 

3/8”

1/2”

5/8”

3/4”

7/8”

1-1/8”

3-1/8”

3” IPS

3-5/8”

4-1/8”

4” IPS

5” IPS

6” IPS

8” IPS

1-3/8”

1-5/8”

1-1/2” IPS

2-1/8”

2” IPS

2-1/2” IPS

2-5/8”

2.3

2.3

2.3

2.3

2.2

2.4

2.0

2.7

2.5

2.5

2.3

2.3

2.2

-

-

2.3

2.2

-

2.3

2.3

2.3

3.2

3.1

2.6

3.0

2.9

3.0

3.1

3.1

3.2

3.1

3.6

3.4

3.3

3.1

3.2

3.0

3.0

3.2

3.2

3.0

2.9

4.9

4.8

4.6

4.7

5.3

5.1

4.4

5.4

5.4

5.5

5.6

5.4

5.4

4.6

4.6

4.5

4.6

4.6

4.6

4.4

4.2

6.6

6.5

6.3

6.4

7.3

7.1

6.2

7.5

7.2

7.1

8.5

7.9

7.5

6.0

5.5

5.7

6.2

6.1

6.1

5.6

5.3

9.2

9.0

8.6

8.8

10.2

9.8

9.9

14.6

13.5

12.8

12.4

11.6

10.8

8.1

8.0

7.7

8.5

8.3

8.3

7.5

7.2

14.9

14.6

13.8

13.6

13.3

12.6

12.9

20.4

18.9

17.8

16.8

16.1

15.8

12.4

12.2

12.1

11.7

11.6

11.1

10.9

-

 2” WALL 

102 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Rubber Pipe Insulation

Seamless Rubber Pipe Insulation

I61025

I61038

I61050

I61058

I61075

I61078

I61118

I61138

I61158

I61200

I61218

I61250

I61258

I61300

I61318

I61350

I61358

I61418

I61450

I60025

I60038

I60050

I60058

I60075

I60078

I60118

• Closed cell flexible elastomeric foam insulation tubes

• Non-slit for slide-on applications

• For use on HVAC/R, commercial, and industrial process piping and equipment

• High resistance to moisture vapor intrusion; low thermal conductivity

• For most indoor applications, no additional jacketing is required.

• UL GREENGUARD® Gold Certified as a low VOC material

• CARTON QUANTITIES ONLY

3/8” Wall Thickness

I60138

I60158

I60200

I60218

I60250

I60258

I60300

I60318

1/4"

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-5/8"

2"

2-1/8"

2-3/8"

2-5/8"

2-7/8"

3-1/8"

I60350 3-1/2"

1/2” Wall Thickness

CTS (NOM. ID

PLUMBING)

1/8"

1/4"

3/8"

1/2"

5/8"

3/4"

1"

1-1/4"

1-1/2"

--

2"

--

2-1/2"

--

3"

--

1-1/8"

1-3/8"

1-5/8"

--

2-1/8"

--

2-5/8"

--

3-1/8"

--

CTS (OD

HVAC/R)

1/4"

3/8"

1/2"

5/8"

3/4"

7/8"

3/4"

1"

1-1/4"

1-1/2"

--

2"

--

2-1/2"

--

3"

IPS

NOMINAL FT/BOX

--

1/8"

630'

612'

1/4"

3/8"

--

1/2"

432'

378'

342'

288'

216'

168'

150'

120'

96'

84'

72'

60'

60'

48'

1/4"

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-5/8"

2"

2-1/8"

2-3/8"

2-5/8"

2-7/8"

3-1/8"

3-1/2"

3-5/8"

4-1/8"

4-1/2"

1-1/2"

--

2"

--

2-1/2"

--

3"

--

3-1/2"

4"

--

CTS (NOM. ID

PLUMBING)

1/8"

1/4"

3/8"

1/2"

5/8"

3/4"

1"

1-1/4"

1-5/8"

--

2-1/8"

--

2-5/8"

--

3-1/8"

--

3-5/8"

4-1/8"

--

CTS (OD

HVAC/R)

1/4"

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-1/4"

1-1/2"

--

2"

--

2-1/2"

--

3"

--

3-1/2"

4"

IPS

NOMINAL FT/BOX

-510'

1/8"

1/4"

3/8"

--

1/2"

3/4"

1"

456'

360'

324'

270'

228'

156'

120'

60'

48'

48'

36'

114'

114'

102'

66'

36'

24'

24'

I64050

I64058

I64075

I64078

I64118

I64138

I64158

I63025

I63038

I63050

I63058

I63075

I63078

I63118

I63138

I63158

I63200

I63218

I63250

I63258

I63300

I63318

I63350

I63358

I63418

I62218

I62250

I62258

I62300

I62318

I62350

I62358

I62418

I62450

I62025

I62038

I62050

I62058

I62075

I62078

I62118

I62138

I62158

I62200

Specifications:

Temp Range: -297°F (-183°C) to +220°F (+104°C)

Flame/Smoke: ASTM E84 25/50-rated (to 2”)

Water Vapor Permeability: <0.01 perm-in

Density: 3-6 lb/cubic ft

Mold growth: None

Ozone Resistance: Good

3/4” Wall Thickness

CTS (NOM. ID

PLUMBING)

1/8"

1/4"

3/8"

1/2"

5/8"

3/4"

1"

1-1/4"

1-1/2"

--

2"

--

2-1/2"

--

3"

--

3-1/2"

4"

--

1” Wall Thickness

1-3/8"

1-5/8"

2"

2-1/8"

2-3/8"

2-5/8"

2-7/8"

3-1/8"

1/4"

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

3-1/2"

3-5/8"

4-1/8"

4-1/2"

1/4"

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-5/8"

2"

2-1/8"

2-3/8"

2-5/8"

2-7/8"

3-1/8"

3-1/2"

3-5/8"

4-1/8"

1-1/2” Wall Thickness

CTS (NOM. ID

PLUMBING)

1/8"

1/4"

3/8"

1/2"

5/8"

3/4"

1"

1-1/4"

1-1/2"

--

2"

--

2-1/2"

--

3"

--

3-1/2"

4"

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-5/8"

CTS (NOM. ID

PLUMBING)

3/8"

1/2"

5/8"

3/4"

1"

1-1/4"

1-1/2"

CTS (OD

HVAC/R)

1-3/8"

1-5/8"

--

2-1/8"

--

2-5/8"

--

3-1/8"

1/4"

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

--

3-5/8"

4-1/8"

--

1"

1-1/4"

1-1/2"

--

2"

--

2-1/2"

--

3"

--

3-1/2"

4"

IPS

NOMINAL FT/BOX

--

1/8"

240'

228'

1/4"

3/8"

--

1/2"

3/4"

228'

180'

144'

126'

90'

30'

30'

24'

24'

60'

48'

42'

78'

72'

66'

36'

36'

CTS (OD

HVAC/R)

7/8"

1-1/8"

1-3/8"

1-5/8"

--

1/4"

3/8"

1/2"

5/8"

3/4"

2-1/8"

--

2-5/8"

--

3-1/8"

--

3-5/8"

4-1/8"

--

2"

--

2-1/2"

--

3"

--

3-1/2"

IPS

NOMINAL FT/BOX

--

1/8"

120'

120'

1/4"

3/8"

--

1/2"

3/4"

1"

1-1/4"

1-1/2"

114'

108'

108'

90'

66'

60'

54'

42'

36'

30'

30'

42'

36'

36'

30'

18'

CTS (OD

HVAC/R)

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-5/8"

IPS

NOMINAL FT/BOX

1/4"

3/8"

--

1/2"

3/4"

1"

1-1/4"

48'

48'

48'

48'

36'

36'

36'

C

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 103

Rubber Pipe Insulation

Double Stick Rubber Pipe Insulation

I81038

I81050

I81058

I81034

I81078

I81118

I81138

I81150

I81158

I81218

I81200

I81258

I81250

I81318

I81300

I81358

I81418

I81400

C

• Closed cell flexible elastomeric foam insulation tubes

• Self-Seal (Pre-Slit / Pre-Glued / DoubleSeal closure system) for retrofit applications

• For use on HVAC/R, commercial, and industrial process piping and equipment

• High resistance to moisture vapor intrusion; low thermal conductivity

• For most indoor applications, no additional jacketing is required.

• UL GREENGUARD® Gold Certified as a low VOC material

• CARTON QUANTITIES ONLY

3/8” Wall Thickness

I80038

I80058

I80034

I80078

I80118

I80138

I80150

I80158

I80218

I80200

1/2” Wall Thickness

3/8"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

2"

1-5/8"

2-1/8"

2-3/8"

CTS (NOM. ID

PLUMBING)

1/4"

1/2"

5/8"

3/4"

1"

1-1/4"

--

1-1/2"

2"

--

CTS (OD

HVAC/R)

3/8"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

--

1-5/8"

2-1/8"

--

IPS

NOMINAL FT/BOX

1/8"

3/8"

--

1/2"

3/4"

570'

348'

318'

288'

216'

1"

1-1/2"

1-1/4"

--

2"

150'

120'

132'

78'

78'

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

2"

1-5/8"

2-1/8"

2-3/8"

2-5/8"

2-7/8"

3-1/8"

3-1/2"

3-5/8"

4-1/8"

4-1/2"

CTS (NOM. ID

PLUMBING)

1/4"

3/8"

1/2"

5/8"

3/4"

1"

1-1/4"

--

1-1/2"

2"

--

2-1/2"

--

3"

--

3-1/2"

4"

--

2-5/8"

--

3-1/8"

--

3-5/8"

4-1/8"

--

CTS (OD

HVAC/R)

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

--

1-5/8"

2-1/8"

--

IPS

NOMINAL FT/BOX

1/8" 420'

1/4"

3/8"

312'

312'

--

1/2"

3/4"

1"

1-1/2"

1-1/4"

--

2"

270'

216'

150'

120'

108'

108'

102'

60'

--

2-1/2"

--

3"

--

3-1/2"

4"

36'

36'

24'

60'

48'

48'

24'

I83058

I83034

I83078

I83118

I83138

I83158

I83150

I83218

I83200

I83250

I83358

I83418

I82038

I82050

I82058

I82034

I82078

I82118

I82100

I82158

I82150

I82218

I82200

I82258

I82250

I82318

I82358

I82418

I82400

Specifications:

Temp Range: -297°F (-183°C) to +220°F (+104°C)

Flame/Smoke: ASTM E84 25/50-rated (to 2”)

Water Vapor Permeability: <0.01 perm-in

Density: 3-6 lb/cubic ft

Mold growth: None

Ozone Resistance: Good

3/4” Wall Thickness

CTS (NOM. ID

PLUMBING)

1/4"

3/8"

1/2"

5/8"

3/4"

1"

1-1/4"

1-1/2"

--

2"

--

2-1/2"

--

3"

3-1/2"

4"

--

1” Wall Thickness

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-5/8"

2"

2-1/8"

2-3/8"

2-5/8"

2-7/8"

3-1/8"

3-5/8"

4-1/8"

4-1/2"

CTS (OD

HVAC/R)

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-5/8"

--

2-1/8"

--

2-5/8"

--

3-1/8"

3-5/8"

4-1/8"

--

--

2"

--

2-1/2"

--

--

3-1/2"

4"

IPS

NOMINAL FT/BOX

1/8" 228'

1/4"

3/8"

--

192'

180'

120'

1/2"

3/4"

1"

1-1/4"

1-1/2"

126'

90'

78'

72'

66'

36'

36'

30'

60'

48'

42'

24'

24'

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-5/8"

2"

2-1/8"

2-3/8"

2-7/8"

3-5/8"

4-1/8"

CTS (NOM. ID

PLUMBING)

1/2"

5/8"

3/4"

1"

1-1/4"

1-1/2"

--

2"

--

--

3-1/2"

4"

CTS (OD

HVAC/R)

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-5/8"

--

2-1/8"

--

--

3-5/8"

4-1/8"

IPS

NOMINAL FT/BOX

3/8"

--

1/2"

108'

78'

78'

3/4"

1"

1-1/4"

1-1/2"

--

66'

60'

42'

42'

42'

2"

2-1/2"

--

3-1/2"

36'

36'

30'

18'

104 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Rubber Pipe Insulation

I91025

I91038

I91050

I91058

I91075

I91078

I91118

I91138

Titan™ Seamless UV Resistant Rubber Pipe Insulation

• Closed cell elastomeric foam NBR/PVC tube with flexible polymeric jacketing material.

• Non-slit for slide-on applications

• For use on HVAC/R, commercial, and industrial process piping and equipment

• Ideal for outdoor applications: UV resistant, tear resistant, weather resistant

• 1-Step Install: No field applied protective coating or additional jacketing required

• High resistance to moisture vapor intrusion; low thermal conductivity

Patent Pending

• CARTON QUANTITIES ONLY

Specifications:

Temp Range: -70°F* (-57°C) to +220°F (+104°C)

Flame/Smoke: ASTM E84 25/50-rated (to 1”)

Water Vapor Permeability: <0.01 perm-in

Density: 3-6 lb/cubic ft

Mold growth: None

Ozone Resistance: Good

1/2” Wall Thickness 3/4” Wall Thickness

1/4"

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

CTS (NOM. ID

PLUMBING)

--

1/4"

3/8"

1/2"

5/8"

3/4"

1"

1-1/4"

CTS (OD

HVAC/R)

1/4"

3/8"

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

IPS

NOMINAL FT/BOX

--

1/8"

510'

456'

1/4"

3/8"

--

360'

324'

270'

1/2"

3/4"

1"

228'

156'

120'

I92050

I92058

I92075

I92078

I92118

I92138

I92158

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-5/8"

CTS (NOM. ID

PLUMBING)

3/8"

1/2"

5/8"

3/4"

1"

1-1/4"

1-1/2"

CTS (OD

HVAC/R)

1/2"

5/8"

3/4"

7/8"

1-1/8"

1-3/8"

1-5/8"

IPS

NOMINAL FT/BOX

1/4"

3/8"

--

228'

180'

144'

1/2"

3/4"

1"

1-1/4"

126'

90'

78'

72'

C

Rubber Insulation Roll

• Closed cell flexible elastomeric foam insulation rolls

• For use on HVAC/R and industrial process ductwork, vessels, equipment and large ID piping (>8” IPS)

• High resistance to moisture vapor intrusion; low thermal conductivity

• For most indoor applications, no additional jacketing is required.

• Available as S2S (skin-two-side)

• UL GREENGUARD® Gold Certified as a low VOC material

• CARTON QUANTITIES ONLY

1/2” Wall Thickness

PART NO.

IR1470

IR5415

I91138

DESCRIPTION

1/2" thick x 4' x 70' roll

2" thick x 4' x 15' roll

1-3/8"

SQ FT/

BOX

280'

60'

120'

Specifications:

Temp Range: -297°F to 220°F (-182°C to 104°C)

Flame/Smoke: ASTM E84 25/50-rated (to 2”)

Water Vapor Permeability: <0.01 perm-in

Density: 3-6 lb/cubic ft

Mold growth: None

Ozone Resistance: Good

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 105

Poly Pipe Insulation

Poly Pipe Insulation

CLOSED CELL FLEXIBLE

FOAM INSULATION

C

DESCRIPTION

Poly pipe insulation is a polyethylene based closed cell, flexible foam insulation meeting the requirements of ASTM C 1427. It is environmentally-friendly as it is free of CFCs, HFCs,

HCFCs, PBDEs, formaldehyde and fibers. Poly pipe insulation contains no halogens. Poly pipe insulation has excellent thermal, physical, and chemical resistance properties as exhibited by its low thermal conductivity and low water absorption and water vapor permeability values.

APPLICATION

Poly pipe insulation is recommended for applications with service temperatures ranging from -200°F (-129°C) to +200°F

(93°C). The product is used to retard heat gain or loss and prevent condensation on below-ambient applications including cold water plumbing, chilled water, and industrial process lines, among others. It also can be used to prolong the time to freezing and can be used with heat tracing tapes. It also retards heat loss from medium hot systems, including hot water plumbing. Poly pipe insulation is used in both residential and commercial applications.

OUTDOOR APPLICATION

Poly pipe insulation is designed for indoor or outdoor use. For UV exposure (rooftop applications) Poly pipe insulation must be protected with an approved coating or jacketed.

UNDERGROUND APPLICATIONS

Poly pipe insulation is acceptable for use in buried applications when installed a bo ve the water table. Below the water table, lines must be encased in a conduit to protect them from problems associated with ground water intrusion and compaction.

INSTALLATIONS

Poly pipe insulation is flexible (even at low temper atures), durable (non-fracturing and skin is resistant to tearing from handling and environment), safe to handle (non-dusting and non-abrasive) and lightweight for an efficient installation. It is recommended that insulation be installed on nonoperational systems with clean, dry surfaces in ambient conditions between

40°F and 110°F. Properly sized tubing can be slid over piping and copper fittings or can be applied to existing lines using the seam-seal product.

All butt joints, termination points, and open ends should be sealed with an approved contact depending on the requirements of the application, making sure both surfaces to be joined are coated. Longitudinal seams should faced downward and vapor stops should be installed as needed.

Fittings (elbows, tees, and p-traps) can be field-fabricated from insulation tubes and sheet. ASTM C1710,

Installation Guide for Flexible Closed

Cell Foams should be used as comprehensive installation guides.

RESISTANCE TO

MOISTURE VAPOR FLOW

The closed cell structure and unique formulation inherently resists moisture vapor intrusion. For most indoor applications, poly pipe insulation needs no additional protection. Additional vapor barrier protection may be necessary when installed on cold systems located in high humidity environments.

FLAME AND SMOKE RATING

Poly pipe insulation in wall thicknesses of 1” (25mm) and below has a flame spread rating of 25 or less and a smoke development rating of 50 or less when tested per ASTM E84,

“Surface Burning Characteristics of

Building Materials”. Numerical flammability ratings alone may not define the performance of products under actual fire conditions. They are provided only for use in the selection of products to meet specified limits.

SPECIFICATION COMPLIANCE

• ASTM C 1427 Type I Pipe, Type II

Sheet (Specification for Extruded

Preformed

Flexible Cellular Polyolefin Thermal

Insulation in Sheet and Tubular Form.)

• ASTM E84 25/50 rated (to 1”) – tested

according to UL 723. NFPA 255

NFPA 90A/B – Acceptable for plenum

applications

• UL 94 HF-1 Flammability Classification

(#E300774)

• Greenguard Gold Certified

• Contains no halogens

• Fiber Free

• Non-dusting

106 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

POLY PIPE INSULATION TECHNICAL DATA

 Physical properties 

Nominal Density, pcf

Specification

*Upper Use Limit, °F (°C)

Lower Use Limit, °F (°C)

Thermal Conductivity, Btu·in./hr·ft² °F (W/(m·K))

75°F (24°C) Mean Temp

120°F (49°C) Mean Temp

 POLY PIPE INSULATION 

1.5 +/- 0.5

200 (93)

-200 (-129)

.27 (.039)

.295 (.042)

Water Vapor Permeability

Water Absorption Max %

Linear Shrinkage at Max Use Temp (200°F)

** Flame/Smoke Rating (max)*

Up to and including 1” Thickness

<0.05

<0.20

-1.2%

25/50

Microbial Resistance

Fungi Resistance

Odor Emission

Corrosion Resistance (Steel, Copper, AL)

Ozone Resistance (50 mPa)

Excellent

Excellent

None

None

No Cracks

* Meets the requirements of NFPA 90A/90B when tested at 250°F (125°C)

 Test methods 

ASTM D 1622

ASTM C 1427, Type I, Type II

ASTM C 411

ASTM C 177 OR C 518

ASTM E 96

ASTM C 209

ASTM C 1427

ASTM E 84

ASTM G 21

UL 181

ASTM C 1304

ASTM C 665

ASTM D 1171

 Required 

200 (93)

-150 (-101)

<0.35 (.050)

<0.37 (.053)

0.05 max

% by volume (0.20 max)

% change (2.0 max)

25/50

No Growth

No Growth

None

None

No Cracks

Poly Pipe Insulation

Pass

Pass

Pass

Pass

Pass

Pass

Pass

Pass

Pass

Pass

Pass

Pass

Pass

 Pass/Fail 

C

POLY PIPE INSULATION

SERVICE

TEMPERATURE

50°F (10°C)

THICKNESS RECOMMENDATIONS - TO PREVENT CONDENSATION

35°F (2°C) 0°F (-18°C)

 Pipe Size 

3/8" ID to 1-1/8 ID

1-3/8 ID to 4-1/2" ID

-20°F (-29°C)

 Mild   Normal   Severe   Mild   Normal   Severe   Mild   Normal   Severe   Mild   Normal   Severe 

3/8"

3/8"

3/8"

3/8"

3/4"

3/4"

3/8"

3/8"

1/2"

3/4"

3/4"

1"

1/2"

1/2"

3/4"

1"

1/2"

3/4"

1"

– excessive moisture is introduced or in poorly ventilated areas where the temperature may be depressed below the ambient: 90°F and 80% R.H.

RANGE

Wall Thickness (nominal)

Inside Diameter, Tubular Form

Length of Sections, Tubular Form

3/8”, 1/2”, 3/4”, and 1” - (10, 13, 19 and 25 mm)

3/8” - 4-1/2” ID - (10 mm ID to 114 mm ID)

6’ (1.83m)

POLY PIPE INSULATION

Nominal

 insulation I.D. 

3/8” 1/4”

“R” VALUES

Copper tube size

 (nom. I.D. plumbing) 

Copper tube size

 (O.D. HVAC/R) 

3/8”

2”

2-1/8”

2-3/8”

2-5/8”

2-7/8”

3-1/8”

3-1/2”

3-5/8”

4-1/8”

4-1/2”

1/2”

5/8”

3/4”

7/8”

1”

1-1/8”

1-1/4”

1-3/8”

1-5/8”

2”

2-1/2”

3”

3-1/2”

4”

3/8”

1/2”

5/8”

3/4”

1”

1-1/8”

1-1/4”

1-1/2”

2-1/8”

2-5/8”

3-1/8”

3-5/8”

4-1/8”

1/2”

5/8”

3/4”

7/8”

1-1/8”

1-1/4”

1-3/8”

1-5/8”

 IPS nominal 

1”

1-1/4”

1-1/2”

2”

1/8”

1/4”

3/8”

1/2”

3/4”

2-1/2”

3”

4”

2.3

2.3

2.3

2.2

2.2

2.1

2.4

2.3

2.2

2.2

2.6

2.5

2.9

2.2

2.2

2.2

2.3

2.3

2.2

2.3

 3/8” 

2.9

2.9

2.9

3.0

3.2

3.1

3.0

3.0

3.1

3.1

3.5

3.3

3.2

3.0

3.0

3.0

3.0

3.1

3.1

3.1

 1/2” 

4.8

4.8

4.7

5.4

5.3

5.1

5.0

5.3

5.3

5.2

5.5

5.2

5.3

4.6

4.5

4.5

4.5

4.5

4.5

4.6

 3/4” 

6.6

6.5

6.4

6.9

6.8

7.2

6.9

7.3

7.0

7.2

8.4

7.9

7.4

6.2

6.1

6.1

6.0

6.0

5.8

5.9

 1”

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 107

Poly Pipe Insulation

C

108

Semi-Slit Pipe Insulation

Specifications:

Temp Range: -200°F (-129°C) to +200°F (93°C)

Flame/Smoke: ASTM E84 25/50-rated (to 1”)

Water Vapor Permeability: <0.05 perm-in

Density: 1.5 +/- 0.5 lbs/cubic foot

Mold growth: None

Ozone Resistance: Good

3/8” Wall Thickness

I55058

I55075

I55078

I55118

I55158

I55178

I55218

• Polyethylene-based closed cell, flexible foam insulation

• Semi-slit for retrofit applications

• For use on hot or cold plumbing lines

• For outdoor use, paint with a high quality exterior acrylic latex paint

• High resistance to moisture vapor intrusion; low thermal conductivity

• CARTON QUANTITIES ONLY

I50058

I50075

I50078

I50118

I50138

I50158

I50178

I50218

I50258

5/8”

3/4”

7/8”

1-1/8”

1-3/8”

1-5/8”

2”

2-1/8”

2-5/8”

1/2” Wall Thickness

I51058

I51078

I51118

I51138

I51158

I51178

I51218

I51238

I51258

3/4” Wall Thickness

5/8”

7/8”

1-1/8”

1-3/8”

1-5/8”

2”

2-1/8”

2-3/8”

2-5/8”

I54050

I54058

I54075

I54078

I54118

I54138

I54158

I54178

I54218

I54258

1” Wall Thickness

1/2”

5/8”

3/4”

7/8”

1-1/8”

1-3/8”

1-5/8”

2”

2-1/8”

2-5/8”

5/8”

3/4”

7/8”

1-1/8”

1-5/8”

2”

2-1/8”

4.8

4.8

4.6

5.4

5.1

5.0

5.2

5.3

5.3

5.3

2.9

2.9

2.9

3.0

3.2

3.1

3.0

3.1

3.0

2.9

2.3

2.2

2.2

2.1

2.4

2.3

2.3

2.2

7.4

7.3

7.0

6.9

6.9

6.6

6.5

3/8”

1/2”

5/8”

3/4”

1”

1-1/4”

1-1/2”

-

2”

2-1/2”

1/2”

5/8”

3/4”

1”

1-1/4”

1-1/2”

-

2”

2-1/2”

CTS (NOM. ID

PLUMBING)

1/2”

3/4”

1”

1-1/4”

1-1/2”

-

2”

-

2-1/2”

IPS

NOMINAL FT/BOX

3/8”

1/2”

3/4”

1”

1-1/4”

330'

240'

186'

150'

120'

1-1/2”

-

2”

-

102'

84'

72'

60'

1/2”

5/8”

3/4”

1”

1-1/2”

-

2”

IPS

NOMINAL FT/BOX

3/8” 396'

-

1/2”

3/4”

1”

1-1/4”

1-1/2”

-

-

300'

276'

222'

180'

138'

126'

96'

72'

IPS

NOMINAL FT/BOX

1/4” 210'

3/8”

1/2”

-

180'

162'

150'

-

1”

1-1/4”

1-1/2”

-

-

120'

96'

84'

66'

54'

48'

IPS

NOMINAL FT/BOX

3/8”

1/2”

120'

120'

-

96'

84'

1-1/4”

1-1/2”

-

60'

54'

54'

Self-Sealing Pipe Insulation

• Polyethylene-based closed cell, flexible foam insulation

• Two strips of self-adhesive seal easily at any length

• For use on hot or cold plumbing lines

• For outdoor use, paint with a high quality exterior acrylic latex paint

• High resistance to moisture vapor intrusion; low thermal conductivity

• CARTON QUANTITIES ONLY

Specifications:

Temp Range: -200°F (-129°C) to +200°F (93°C)

Flame/Smoke: ASTM E84 25/50-rated (to 1”)

Water Vapor Permeability: <0.05 perm-in

Density: 1.5 +/- 0.5 lbs/cubic foot

Mold growth: None

Ozone Resistance: Good

3/8” Wall Thickness

PART NO.

I52058

I52034

I52078

I52118

I52138

I52158

I52178

I52218

I52238

I52258

I52318

I52358

1/2” Wall Thickness

INSULATION

NOMINAL ID

5/8”

3/4”

7/8”

1-1/8”

1-3/8”

1-5/8”

2”

2-1/8”

2-3/8”

2-5/8”

3-1/8”

3-5/8”

I53178

I53218

I53238

I53258

I53318

I53312

I53358

I53418

I53412

I53038

I53050

I53058

I53075

I53078

I53118

I53138

I53158

PART NO.

INSULATION

NOMINAL ID

3/8”

1/2”

5/8”

3/4”

7/8”

1-1/8”

1-3/8”

1-5/8”

2”

2-1/8”

2-3/8”

2-5/8”

3-1/8”

3-1/2”

3-5/8”

4-1/8”

4-1/2”

3/4” Wall Thickness

I57058

I57115

I57078

I57118

I57138

I57158

I57178

I57218

I57238

I57258

PART NO.

I56058

I56075

I56078

I56118

I56138

I56158

I56218

1” Wall Thickness

INSULATION

NOMINAL ID

5/8”

3/4”

7/8”

1-1/8”

1-3/8”

1-5/8”

2-1/8”

PART NO.

INSULATION

NOMINAL ID

5/8”

3/4”

7/8”

1-1/8”

1-3/8”

1-5/8”

2”

2-1/8”

2-3/8”

2-5/8”

5.3

5.3

5.3

5.4

5.1

5.0

4.8

7.4

7.3

7.0

6.9

7.2

6.9

6.6

6.5

6.4

6.2

2.1

2.4

2.3

2.3

2.9

2.3

2.2

2.2

2.3

2.2

2.2

2.3

3.0

3.0

3.1

3.1

3.1

2.9

2.9

2.9

3.0

3.1

3.0

3.1

3.0

3.5

3.3

3.2

3.0

-

2”

-

2-1/2”

3”

-

3-1/2”

4”

-

1/4”

3/8”

1/2”

3/4”

3/4”

1”

1-1/4”

1-1/2”

1/2”

5/8”

3/4”

1”

1-1/4”

1-1/2”

-

2”

-

2-1/2”

3”

3-1/2”

1/2”

5/8”

3/4”

1”

1-1/4”

1-1/2”

-

2”

-

2-1/2”

1/2”

5/8”

3/4”

1”

1-1/4”

1-1/2”

2”

IPS

NOMINAL FT/BOX

3/8”

-

1/2”

3/4”

1”

1-1/4”

1-1/2”

-

-

-

2”

-

396'

300'

276'

222'

180'

138'

126'

96'

84'

72'

54'

42'

-

-

4”

2”

-

-

3”

IPS

NOMINAL FT/BOX

-

1/4”

3/8”

1/2”

1/2”

3/4”

1”

1-1/4”

1-1/2”

-

414'

336'

300'

264'

240'

186'

150'

120'

102'

84'

72'

60'

48'

36'

36'

30'

24'

IPS

NOMINAL FT/BOX

3/8”

1/2”

1/2”

3/4”

1”

1-1/4”

-

180'

162'

150'

120'

96'

84'

54'

IPS

NOMINAL FT/BOX

3/8”

-

1/2”

-

1”

1-1/4”

1-1/2”

-

2”

-

72'

60'

54'

54'

42'

36'

120'

120'

96'

84'

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Insulation Tools/Water Heater Supplies

Poly Pipe Insulation Tees and Elbows

• Polyethylene-based closed cell, flexible foam insulation in factory-made fitting form

• For use on plumbing pipe bends, intersections and curvatures for hot or cold pipe

• Two strips of self-adhesive to seal easily

• CARTON QUANTITIES ONLY

Specifications:

Temp Range: -200°F (-129°C) to +200°F (93°C)

Flame/Smoke: ASTM E84 25/50-rated (to 1”)

Water Vapor Permeability: <0.05 perm-in

Density: 1.5 +/- 0.5 lbs/cubic foot

Mold growth: None

Ozone Resistance: Good

PART NO.

DESCRIPTION

I59050

I59075

I59100

I59125

I59150

I59175

I59200

I59225

1/2" tee

3/4" tee

1" tee

1-1/4" tee

1/2" elbow

3/4" elbow

1" elbow

1-1/4" elbow

WALL THICKNESS

3/8"

3/8"

3/8"

3/8"

3/8"

3/8"

3/8"

3/8"

CTN/MSTR

1/16

1/12

1/12

1/8

1/32

1/20

1/16

1/12

Insulation Contact Adhesive

• Air-drying, solvent-based adhesives for joining seams and joints.

• Brush top can

• Fast tack drying time: 2-4 minutes

• Slow tack drying time: 5-10 minutes minimum

• MOTOR FREIGHT ONLY/FLAMMABLE

• CARTON QUANTITIES ONLY

PART NO.

IA1050

IA1100

IA2050

IA2100

DESCRIPTION

1/2 pint Fast tack, Amber

1 pint Fast tack, Amber

1/2 pint Slow tack, Blue

1 pint Slow tack, Blue

CTN/MSTR

48/48

24/24

48/48

24/24

Thermal Expansion Tank

• Designed for the protection of potable hot water systems

• Install between the backflow preventer and the water heater

• Six year warranty

PART NO.

R15202

R15204

PART NO.

J36500

J36501

SPECIFICATIONS:

Factory pre-charge: 35psi

System connection: 304 Stainless Steel

Diaphragm: Butyl Rubber

Liner Material: Food Grade Polypropylene

Max. Operating Temperature: 200°F

Max. Operating Pressure: 150psi

DESCRIPTION

2 gallon tank

4-1/2 gallon tank

DESCRIPTION

Kit with 12” copper wire

Kit with 24” copper wire

CTN. QTY.

1

1

Water Heater Grounding Kit

• Kit includes 2 bare bronze clamps

• Fits 1/2” to 1” pipe

• 6 gauge copper wire

PALLET QTY.

150

80

CTN/MSTR

1/6

1/6

C

Insulation Protective Coating

PART NO.

IPC004

• Water-based coating that provides UV protection on closed cell tubing and sheet insulation.

• Resists UV for 2-3 years

DESCRIPTION

1 gallon, White

Insulation Tape

• Superior pressure sensitive adhesive

• Ideal for short runs of pipes or valves

CTN/MSTR

1/4

Dielectric Union

Female x Sweat Male x Sweat

Female x Sweat

PART NO.

FIP x COPPER SWEAT

D06050

D06075

D06100

D06125

D06150

D06200

1/2” x 1/2”

3/4” x 3/4”

1” x 1”

1-1/4” x 1-1/4”

1-1/2” x 1-1/2”

2” x 2”

Reducing

PART NO.

FIP x COPPER SWEAT

D06350 3/4” x 1/2”

Male x Sweat

PART NO.

MIP x COPPER SWEAT

D06005

D06750

1/2” x 1/2”

3/4” x 3/4”

Reducing

PART NO.

MIP x COPPER SWEAT

D06755 3/4” x 1/2”

• Zinc plated forged steel

• Prevents electrolysis or galvanic action when connecting dissimilar metals

• Residential or commercial use

• Solder ends conform to ANSI B16.19

• EPDM washer, ABS fiber sleeve

• Threads conform to ASNI B2.1

• Pressure rated at 250 PSI at 180°F

• Lead Free

OD

5/8”

7/8”

1-1/8”

1-3/8”

1-5/8”

2-1/8”

OD

5/8”

OD

7/8”

7/8”

OD

5/8”

CTN/MSTR

24/144

24/96

12/96

6/48

6/48

6/18

CTN/MSTR

24/96

CTN/MSTR

24/96

24/96

CTN/MSTR

24/72

PART NO. DESCRIPTION

INT001

INT002

1/8” x 2” x 30’ Cork tape, Black

1/8” x 2” x 30’ Foam tape, Black

Flanged Dielectric Union

• Temperature range: 180°F at 200 PSI

• Maximum temperature 200°F

• Lead free

CTN/MSTR

1/12

1/12

Universal Copper Thermocouple

• All copper with brass fittings

• Adaptable to 5 different pilot valves

• Kit includes 2 clips and nuts

• Individually carded

PART NO. FIP x COPPER SWEAT

D06250

D06300

D06400

2-1/2” x 2-1/2”

3” x 3”

4” x 4”

CTN/MSTR

1/4

1/4

1/2

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

PART NO. DESCRIPTION

J36118

J36124

18” copper thermocouple

24” copper thermocouple

J36130

J36136

J36148

30” copper thermocouple

36” copper thermocouple

48” copper thermocouple

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

10/100

10/100

1/10

1/10

1/10

109

Water Heater Supplies

C

Gasket and Insert for Dielectric Union

• For water

• 200°F temperature rating

• CARTON QUANTITIES ONLY

Insert Gasket

PART NO. DESCRIPTION

D06800

D06801

D06802

D06803

D06804

D06805

1/2” insert

3/4” insert

1” insert

1-1/4” insert

1-1/2” insert

2” insert

D06850

D06875

D06900

D06901

D06902

D06903

1/2” gasket

3/4” gasket (EPDM rubber)

1” gasket

1-1/4” gasket

1-1/2” gasket

2” gasket

CTN/MSTR

25/600

25/600

25/400

25/400

25/200

25/100

10/1000

10/1000

10/1000

10/1000

10/1000

10/1000

Corrugated Water Heater Connector

Copper

PART NO.

J34712

J34715

J34718

J34724

• Corrugated for easy flex on water heaters and softeners

• Includes rubber washers

FPT x LENGTH

3/4” x 12”

3/4” x 15”

3/4” x 18”

3/4” x 24”

CTN/MSTR

1/50

1/50

1/50

1/50

Dielectric Nipple

• Electroplated steel casing with non-corrosion thermoplastic lining• 180° maximum temperature

• Prevents corrosion, lime and scale buildup

• Adds years of life to any water system

• For use on water heaters, dishwashers, water filtration systems

PART NO.

D06753

D06450

D06500

D06510

D06525

D06550

D06600

D06650

D06700

SIZE

3/4” MIP x 3” length

1/2” MIP x 3” length

1” MIP x 3” length

1” MIP x 4” length

1-1/4” MIP x 4” length

1-1/2” MIP x 4” length

2” MIP x 4” length

2-1/2” MIP x 6” length

3” MIP x 6” length

CTN/MSTR

50/100

50/100

25/50

25/50

25/50

5/25

5/25

5/10

5/10

PART NO.

J35712

J35715

J35718

J35724

Stainless Steel

PART NO.

J38712

J38715

J38718

J38724

PART NO.

J39712

J39715

J39718

J39724

FIP x SWT x LENGTH

3/4” x 3/4” x 12”

3/4” x 3/4” x 15”

3/4” x 3/4” x 18”

3/4” x 3/4” x 24”

MIP x FIP x LENGTH

3/4” x 3/4” x 12”

3/4” x 3/4” x 15”

3/4” x 3/4” x 18”

3/4” x 3/4” x 24”

FIP x FIP x LENGTH

3/4” x 3/4” x 12”

3/4” x 3/4” x 15”

3/4” x 3/4” x 18”

3/4” x 3/4” x 24”

CTN/MSTR

25/50

25/50

25/50

25/50

CTN/MSTR

25/50

25/50

25/50

25/50

CTN/MSTR

25/50

25/50

25/50

25/50

Braided Stainless Steel Water Heater Connector

PART NO.

S04350

S04351

S04352

• UPC listed

• Lead Free

FIP x LENGTH

3/4” x 12”

3/4” x 18”

3/4” x 24”

CTN/MSTR

10/40

10/40

10/40

Plumbite ® Push On Water Heater Connector

• Heat-free method for joining copper, CPVC, PEX or PE-RT tubing

• Ideal for piping systems service and repair

• No soldering, glue, heat or external tools required to join the pipe

• Secure connection and seal with stainless steel gripper ring and EPDM o-ring

• Maximum temperature is 180°F and maximum pressure is 200 PSI

• Can be disassembled and re-used using the disassembly tool (sold separately)

• Standards/Certifications: NSF/ANSI 61, NSF/ANSI 372,

NSF/ANSI 14, ASSE 1061, UPC, cUPC and IAPMO

• Lead free

PART NO.

S04353

S04354

S04355

PART NO.

S04356

S04357

S04358

PART NO.

S04359

S04360

MIP x COMP x LENGTH

3/4” x 3/4” x 12”

3/4” x 3/4” x 18”

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

CTN/MSTR

10/40

10/50

110

FIP x COMP x LENGTH

3/4” x 3/4” x 12”

3/4” x 3/4” x 18”

3/4” x 3/4” x 24”

FIP x MIP x LENGTH

3/4” x 3/4” x 12”

3/4” x 3/4” x 18”

3/4” x 3/4” x 24”

CTN/MSTR

10/40

10/40

10/40

CTN/MSTR

10/40

10/40

10/40

PART NO.

C76605LF

C76606LF

C76612LF

C76613LF

C77478LF

C77479LF

C76616LF

C77477LF

PF x FIP x LENGTH

1/2” x 3/4” x 12”

1/2” x 3/4” x 15”

3/4” x 3/4” x 12”

3/4” x 3/4” x 15”

3/4” x 3/4” x 18”

3/4” x 3/4” x 24”

1/2” valve x 3/4” x 18”

3/4” valve x 3/4” x 18”

CTN/MSTR

10/40

10/40

10/40

10/40

10/40

10/40

10/40

10/40

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Water Heater Stand

• 16 gauge galvanized steel

• Heavy duty

• Corrosion resistant

• Top 21.5” x 21.5”

• Rated up to 650 pounds

• For water heaters up to 52 gallons

• Includes mounting clips for securing to wall/floor

• Quick assembly

• Meets UPC and IPC requirements

CTN/MSTR

1/1

PART NO. DESCRIPTION

J36400 21-1/2” square x 16” high water heater stand

• 18 gauge galvanized steel

• Corrosion resistant

• Top 18” x 18”

• Rated up to 2,000 pounds

• For water heateres upn to 29 gallons

• Quick assembly

• Meets UPC and IPC requirements

PART NO. DESCRIPTION

J36200 18” square x 17” high water heater stand

• 1 in. sq. tubular steel

• Heavy duty

• Corrosion resistant

• Rated up to 2200 pounds

• For water heaters up to 100 gallons

• No assembly required

PART NO. DESCRIPTION

J36300

J36250

25-1/4” x 19” high water heater stand

28-3/8” x 18-3/8” high water heater stand

CTN/MSTR

1/4

CTN/MSTR

1/1

1/1

Water Heater Supplies/Pressure Gauges

Water Heater Pan

CORNERS

FOLDED FOR

STRENGTH

Seamless Galvanized Corner

PART NO. DESCRIPTION

J38020 20” round water heater pan (aluminum)

J38022

J38024

J38026

J38030

22” round water heater pan (aluminum)

24” round water heater pan (aluminum)

26” round water heater pan (aluminum)

30” round water heater pan (aluminum)

Water Heater Pan Adapter

• 1” PVC

• Washer and locknut

• Fits all Jones Stephens pans

PART NO. DESCRIPTION

J34800 1” Adapter

• Seamless galvanized water heater pans are folded not welded

• 1” pan adapter (J34800) included

• One piece stamped aluminum

.032 mil (20 gauge)

• Aluminum pans comply with

SBCCI, sec. 1213.7

CTN/MSTR

1/6

1/6

1/6

1/6

1/5

C

CTN/MSTR

1/25

Water Heater Safety Pan

• High impact plastic

• 1” pan adapter (J34800) included

• 2-1/2” depth

• Southern Building Code and natural gas approved

• CARTON QUANTITIES ONLY

PART NO.

J36018

J36022

J36024

J36026

J36030

BOTTOM ID

19”

22”

24”

26”

30”

TOP ID

20-1/2”

22-1/2”

25-1/2”

27-1/2”

31-1/2”

CTN/MSTR

1/10

1/10

1/10

1/10

1/5

Galvanized Hot Water Heater Pan

• 24 gauge

• Flared sides

• 1” pan adapter (J34800) included

PART NO. DESCRIPTION

J37022 22” x 22” x 4” water heater pan

J37024

J37026

24” x 24” x 4” water heater pan

26” x 26” x 4” water heater pan

J37028

J37030

28” x 28” x 4” water heater pan

30” x 30” x 4” water heater pan

Run-Off Tube

• For water heaters

• Electroplated fittings

• 230°F temperature rating

• Hand tighten to T and P valve

• Meets AMSE A112.4.1

• UL listed

• J34970 is sold in CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

J34975 3/4” NPT x 60” side mount

J34980

J34970

3/4” NPT top mount

3/4” NPT x 60” side mount

CTN/MSTR

1/100

1/25

12/12

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

Gas Testing Equipment

• Large 4” face

• Class 1A gauge

• 5 lb. gas test gauge/15 lb. gas test gauge

• 1/10 # increments

• Inches of mercury scale

• External set hand

• Bellows design

• 1/4 NPT connection

• Gauge meets all requirements of the City of Houston code

Word 94-108, Section 1204.3.2, revised January 18, 2001

• Individually boxed

• ALL SALES FINAL; NO WARRANTY; NO RETURN

PART NO. DESCRIPTION

G60055 15 lb. gas test gauge only

G60005 5 lb. gas test gauge only

CTN/MSTR

1/20

1/20

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 111

Pressure Gauges

C

Liquid Filled Pressure Gauge

• Polished 304 stainless steel case with vent plug

• 2-1/2” face (glass)

• +/- 1.5% accuracy

• Glycerin filled for use where vibration or pressure pulsation occur

• -50 to 150°F operating temperature

• 1/4” NPT bottom connection

• Individually boxed

PART NO. DESCRIPTION

J40553

J40554

0-30 PSI

0-60 PSI

J40555

J40556

J40557

0-100 PSI

0-200 PSI

0-300 PSI

CTN/MSTR

1/50

1/50

1/50

1/50

1/50

Pressure Gauge

PART NO.

FACE SIZE

G60015

G60030

2”

2”

G60060

G60100

G60160

G60200

G60300

2”

2”

2”

2”

G61015

G61030

G61060

G61100

2”

2-1/2”

2-1/2”

2-1/2”

G61160

G61200

G61300

G62030

G62060

2-1/2”

2-1/2”

2-1/2”

2-1/2”

3-1/2”

G62100

G62200

G62300

3-1/2”

3-1/2”

3-1/2”

3-1/2”

• Steel case

• Shatterproof face

• 1/4” MIP brass lower connection

• Applicable with air, water, oil and gas - anything which does not attack brass

• Not for use on oxygen service

• Class 2.5-2% accuracy

• Individually boxed

PRESSURE RATING

15 PSI

30 PSI

60 PSI

100 PSI

160 PSI

200 PSI

300 PSI

15 PSI

30 PSI

60 PSI

100 PSI

160 PSI

200 PSI

300 PSI

30 PSI

60 PSI

100 PSI

200 PSI

300 PSI

CTN/MSTR

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/100

1/60

1/100

1/100

1/100

1/100

1/100

1/50

1/50

1/50

1/50

1/50

Water Test Gauge

• Steel case with 2-1/2” shatterproof face

• 3/4” female brass hose connection

• Individually boxed

PART NO. DESCRIPTION

J66300 300 PSI

J66301 300 PSI with indicator arm

J66302 160 PSI with indicator arm

CTN/MSTR

1/50

1/50

1/50

Sillcock/Water or Gas Test Gauge Assembly

• Steel case with 2” shatterproof face

• Brass air valve

• Adapts to 3/4” male garden hose or 3/4” MIP

• Comes with garden hose adapter

• Individually boxed

CTN/MSTR

1/50

PART NO. DESCRIPTION

G64101 200 PSI

5 Pound Gas Test Gauge

• 1/4” NPT

• 2-1/2” diaphragm

• 1/10 # increments

• For building code inspection

• Individually boxed

PART NO. DESCRIPTION

G61005 5 lb. gas test gauge

Gas Test Gauge

• 2” steel case gauge on 15 lb.

• 5 lb. is marked in 1/10 lb. increments

• 15 lbs. is marked in 1/10 lb. increments

• Plated body with 3/4” FIP inlet

• 2 1/2” diaphragm on 5 lb.

• Adapts to 3/4” MPT

• Brass air valve

• Individually boxed

PART NO. DESCRIPTION

G64015 15 lb. gas test gauge assembly

G64005 5 lb. gas test gauge assembly

Test Gauge Assembly

• Bell type

• Individually boxed

CTN/MSTR

1/100

CTN/MSTR

1/50

1/50

Pigtail Syphon

G60000

PART NO. DESCRIPTION

G60000 Straight

G60001 90° Angle

G60001

112

• Steel construction

• For use with gauges on steam line

• 1/4” MPT x 1/4” MPT

CTN/MSTR

20/200

10/200

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

PART NO. DESCRIPTION

G66015 15# x 3/4” FIP

G66030 30# x 3/4” FIP

G66060 60# x 3/4” FIP

G66100 100# x 3/4” FIP

G67015 15# x 1” FIP

G67030 30# x 1” FIP

G67060 60# x 1” FIP

G67100 100# x 1” FIP

G66000 3/4” Bell body (less air valve)

G66002 3/4” Bell body (with air valve)

G67000 1” Bell body (less air valve)

G67002 1” Bell body (with air valve)

CTN/MSTR

1/50

1/50

1/50

1/24

1/50

1/50

1/50

1/100

1/100

1/100

1/59

1/80

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Gas Test Gauge Assembly

• 4” face and pressure snubber

• Regulates air to an even flow

• Over pressurization will void the warranty

• Protects the diaphragm from compressed air damage

• Class 1A gauge

• Individually boxed

PART NO. DESCRIPTION

G64155 5 lb. test gauge assembly

G65155 15 lb. test gauge assembly

Gas Test Gauge Assembly

• Steel case with 2” shatterproof face

• Adapts to 3/4” MPT

• Plated body with 3/4” FIP inlet

• Brass air valve

• Individually boxed

CTN/MSTR

1/20

1/20

PART NO. DESCRIPTION

G64030 30 PSI

G64060 60 PSI

G64100 100 PSI

G64160 160 PSI

G64200 200 PSI

G64333 300 PSI

G64000 1/4” air valve and cap

G64001 Gas test body only

G64002 1/8” air valve and cap

G64020 Gas test body and air valve assembly

Tridicator

• 0-55 PSI

• 70°F to 250°F temperature range

• Back mount

CTN/MSTR

1/50

1/50

1/50

1/50

1/50

1/50

50/500

1/100

500/1000

1/100

Pressure Gauges/Thermometers

Pressure Snubber

• Bronze body and core

• Use on lines with noticeable pressure changes/oscillations

• 1000 PSI maximum

PART NO. DESCRIPTION

G64300 1/4” NPT for air or gas

G64301 1/4” NPT for oil, steam or water

Needle Valve for Pressure Gauge

• Brass body, seat, stem and handle

• 1/4” NPT

• 300°F maximum temperature

• Female x female

• Teflon packing

• 2000 PSI

PART NO. DESCRIPTION

G64004 1/4” needle valve

CTN/MSTR

1/500

1/200

CTN/MSTR

1/125

C

Hot Water/Refrigerant Line Thermometer

B

A

• Straight or angle pattern

• Steel or brass well included

• 40°-280°F x 5°F (5-120°C x 2°C)

• 1/2” NPT; 1” stem

PART NO. DESCRIPTION DIM (A) DIM (B) CTN/MSTR

J40500 Straight pattern with steel well 1”

J40501 Straight pattern with brass well 1”

1/2” NPT

1/2” NPT

1/50

1/50

J40502 Angle pattern with steel well

J40503 Angle pattern with brass well

1”

1”

1/2” NPT

1/2” NPT

1/50

1/50

Dial Thermometer

PART NO. DESCRIPTION

J40550

J40551

2 1/2” face angle 2 1/4” stem (1/4” NPT)

2 1/2” face angle 2 1/2” stem (1/4” NPT)

J40558

J40560

2 1/2” face angle 1” stem (1/4” NPT)

3 1/2” face angle 2 3/4” stem (1/2” NPT)

Dual Scale Boiler Gauge

• 0-75 PSI

• 1/4” MIP connection

• -60-320° F, 20-160° C

• Center back mount

• 3-1/2” face

PART NO. DESCRIPTION

J40575 Dual scale boiler gauge

Vacuum Gauge

• 1/4” brass lower connection

• -30 to 0 inch Hg

• Black steel case with bronze internals

• 2” face

CTN/MSTR

1/50

1/50

1/50

1/50

CTN/MSTR

1/100

• 2-1/2” face

• 5° increments

SWT Connection

• Dual scale: 40°-240°/0°-120°C

• Brass wells/removable thermometers

• Thermometers are not supplied with wells

PART NO. DESCRIPTION

J40702 3/4” SWT connection

J40703

J40704

1/2” MIP connection

3/4” SWT well

J40705 1/2” MIP well

PART NO. DESCRIPTION

G63001 Vacuum gauge

CTN/MSTR

1/100

PART NO. DESCRIPTION

J40700 Cold thermometer (-40° to 160°F)

J40701 Hot thermometer (0° to 220°F)

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

MIP Connection

CTN/MSTR

1/50

1/100

1/100

1/100

Pocket Test Thermometer

• 2% accuracy for hot and cold

• Pocket clip on sheath; 5” stem

CTN/MSTR

1/80

1/80

113

Thermometers/Tubing

Weksler Industrial Multi-Angle Thermometer

B

A

• Must have well - no well provided; order wells separately

• 9” scale, red-reading mercury tubes

• Molded cycolac case with glass window

• Adjustable to any angle

• Accurate to +/- one scale division

Clear Vinyl Tubing

• 75 duro clear

• 100’ coil in dispenser box

• -5°F to +125°F

• Self-dispensing cartons

• FDA grade

C

PART NO. DESCRIPTION DIM (A) DIM (B)

J40505 Hot water 30°-240°F 3-1/2” stem 1” NPSM

J40506 Cold water 0°-120°F 3-1/2” stem 1” NPSM

J40510 Standard brass well 2-1/2” stem 3/4” NPT

J40511 Extended well 1-3/4” stem 3/4” NPT

CTN/MSTR

1/50

1/25

1/50

1/50

Bi-Metal Dial Thermometer

A

B

• For commercial or home heating systems

• 1/2” NPT

• 20°-240°F temperature range

• 3” dial in steel case

• Angle has back connection; straight has bottom connection

PART NO. DESCRIPTION DIM (A)

J40561

J40562

Angle outlet with brass well

Straight outlet with brass well

2-3/8” stem

2-3/8” stem

DIM (B)

1/2” NPT

1/2” NPT

• Solid brass construction

• 1-1/2” stem

• 1/2” MPT x 1/4” FPT threads

CTN/MSTR

1/50

1/50

PART NO. DESCRIPTION

J40563 Brass well for J40562

CTN/MSTR

1/200

PART NO.

OD

T26124

T26125

T26186

3/16”

ID

1/8”

1/4” 1/8”

WALL

1/32”

1/16”

1/4” 3/16” 1/32”

WPPSI

50

80

40

FT/BOX CTN/MSTR

100’

100’

100’

1/1

1/1

1/1

T26187

T26250

5/16”

3/8”

3/16”

1/4”

1/16”

1/16”

60

55

100’

100’

1/1

1/1

T26252

T26312

T26313

T26375

T26376

T26377

T26498

T26500

T26626

T26625

T26750

T26875

T26000

1/2” 1/4” 1/8”

7/16” 5/16” 1/16”

1/2” 5/16” 3/32”

1/2” 3/8” 1/16”

9/16” 3/8”

5/8” 3/8”

5/8” 1/2”

3/4”

3/4”

1/2”

5/8”

7/8” 5/8”

1” 3/4”

1 1/8”

1 1/4”

7/8”

1”

3/32”

1/8”

1/16”

1/8”

1/16”

1/8”

1/8”

1/8”

1/8”

90

50

60

45

55

65

30

45

30

40

35

30

28

100’

100’

100’

100’

100’

100’

100’

100’

100’

100’

100’

50’

50’

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Soft Aluminum Tubing

• 50’ coils

• Alloy 3003-0, ASTM B-483

Natural Polyethylene Tubing

• Non-toxic, 100% virgin material

• 100’ coil in dispenser box

• FDA grade

• -40°F to +135°F

• Low density

PART NO.

T25250

T25312

T25375

T25500

T25625

OD

1/4”

ID PSI WALL FT/BOX CTN/MSTR

.170” 120 .040

100’ 1/1

5/16” .187” 150

3/8” .250” 125

.040

.062

100’

100’

1/1

1/1

1/2”

5/8”

.375”

.500”

95

75

.062

.500

100’

100’

1/1

1/1

PART NO.

T27125

T27188

T27250

T27313

T27375

T27438

T27500

T27625

OD

1/8”

3/16”

1/4”

5/16”

3/8”

7/16”

1/2”

5/8”

WALL

.025

.028

.032

.035

.035

.035

.035

.035

CTN/MSTR

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

114

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Self-Nailing Stud Guards

• Protects piping and wiring from nails

• CARTON QUANTITIES ONLY

• No holes

S33002

S33006

S33001

S33038

S16007

S16014

S20009

S20012

S33011

S33010

PART NO.

S16003

S16015

S16005

S33005

S16009

S16012

S16018

S16024

S33036

S33035

S16008

SIZE

1-1/2” x 3”

1-1/2” x 4”

1-1/2” x 5”

1-1/2” x 6”

1-1/2” x 9”

1-1/2” x 12”

1-1/2” x 18”

1-1/2” x 24”

2” x 5”

3” x 5”

5” x 8”

1-1/2” x 3”

1-1/2” x 5”

1-1/2” x 6”

3” x 5”

1-1/2” x 5”

1-1/2” x 8”

1-1/2” x 9”

1-1/2” x 12”

1-1/2” x 3”

1-1/2” x 6”

• No holes

18

20

20

20

18

18

18

20

22

22

GAUGE CTN/MSTR

16 100/100

16

16

16

100/100

100/100

100/100

16

16

16

16

16

16

16

100/100

100/100

50/50

25/25

100/100

100/100

50/50

100/100

100/100

100/100

100/100

100/100

100/100

100/100

100/100

100/100

100/100

PART NO.

F12001

PART NO.

S33012

S33318

PART NO.

S16017

SIZE

3-1/2” x 6”

SIZE

3-1/2” x 6”

3-1/2” x 18”

SIZE

3-1/2” x 6”

Stud Guards

Not Self-Nailing Stud Guards

• Protects piping and wiring from nails

• CARTON QUANTITIES ONLY

• Two holes

PART NO.

S16006

S16016

SIZE

1-1/2” x 6”

1-1/2” x 6”

GAUGE CTN/MSTR

16

18

100/100

100/100

• Two holes

• Four holes

• Six holes

GAUGE CTN/MSTR

16 25/25

GAUGE CTN/MSTR

16

16

100/100

25/25

GAUGE CTN/MSTR

16 25/25

C

• Six holes

PART NO.

S33037

S16010

PART NO.

S33039

S16001

S16002

PART NO.

S33007

S33016

S16004

S33004

PART NO.

S16011

S180032

SIZE

4” x 5”

5” x 8”

GAUGE CTN/MSTR

16 100/100

16 25/25

• No holes

SIZE

3” x 5” offset

3” x 5” offset

5” x 6” offset

• Interlocking - No holes

GAUGE CTN/MSTR

16

18

16

100/100

25/25

50/50

SIZE

1-1/2” x 6”

3-1/2” x 6”

1-1/2” x 6”

1-1/2” x 6”

• Two holes

GAUGE CTN/MSTR

16

16

18

20

100/100

25/25

100/100

100/100

SIZE

5” x 8”

1-1/2” x 3”

• Six holes

GAUGE CTN/MSTR

16

18

25/25

200/200

PART NO.

S33003

PART NO.

S163566

PART NO.

F12004

PART NO.

F12003

PART NO.

F12002

SIZE

5” x 8”

GAUGE CTN/MSTR

16 50/50

• Twelve holes

SIZE

3-1/2” x 6”

GAUGE CTN/MSTR

16 25/25

SIZE

3” x 18”

• Sixteen holes

GAUGE CTN/MSTR

16 50/50

• Sixteen holes

SIZE

3-1/2” x 18”

GAUGE CTN/MSTR

16 25/25

SIZE

5” x 18”

• Sixteen holes

GAUGE CTN/MSTR

16 15/15

• Twenty holes

PART NO.

S33013

SIZE

5” x 8”

GAUGE CTN/MSTR

16 25/25

PART NO.

S33518

SIZE

5” x 18”

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

GAUGE CTN/MSTR

16 15/15

115

Stud Guards/Stub Outs

F.H.A. Straps

• CARTON QUANTITIES ONLY

C

PART NO.

F165181

PART NO.

F180032

PART NO.

F160123

F160183

F160243

F160363

F160393

F160063

F160093

PART NO.

F12009

F12012

F12018

F12024

F14012

F16012

F160184

F160094

F18009

F18012

F18018

F18024

PART NO.

F160126

F16016

F160186

F160246

F163186

F163246

F165186

PART NO.

F18309

F18312

F18318

F18324

• Four holes

SIZE

1-1/2” x 9”

1-1/2” x 12”

1-1/2” x 18”

1-1/2” x 24”

1-1/2” x 12”

1-1/2” x 12”

1-1/2” x 18”

1-1/2” x 9”

1-1/2” x 9”

1-1/2” x 12”

1-1/2” x 18”

1-1/2” x 24”

SIZE

5” x 18”

SIZE

1-1/2” x 3”

SIZE

1-1/2” x 12”

1-1/2” x 18”

1-1/2” x 24”

3” x 6”

3” x 9”

1-1/2” x 6”

1-1/2” x 9”

SIZE

1-1/2” x 12”

1-1/2” x 16”

1-1/2” x 18”

1-1/2” x 24”

3” x 18”

3” x 24”

5” x 18”

SIZE

3” x 9”

3” x 12”

3” x 18”

3” x 24”

GAUGE CTN/MSTR

16 15/15

• Two holes

GAUGE CTN/MSTR

18 200/200

• Six holes

GAUGE CTN/MSTR

16

16

16

16

16

16

16

50/50

50/50

50/50

50/50

50/50

50/50

50/50

• Eight offset holes

GAUGE CTN/MSTR

14

16

16

16

12

12

12

12

18

18

18

18

50/50

50/50

50/50

50/50

50/50

50/50

50/50

50/50

100/100

100/100

100/100

100/100

• Twelve offset holes

GAUGE CTN/MSTR

16

16

16

16

16

16

16

50/50

50/50

50/50

50/50

50/50

50/50

15/15

• Twelve holes

GAUGE CTN/MSTR

18

18

18

18

50/50

50/50

50/50

50/50

Stud Shoes

• 4 nail holes on each side

• Pipe opening accommodates 2” IPS or smaller pipe

• Stud/joist reinforcement when drilling or notching for pipe runs

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

S33021

S33022

Single stud shoe

Double stud shoe

S33023

S33024

S33025

S33026

Triple stud shoe

Single stud shoe

Double stud shoe

Triple stud shoe

GAUGE CTN/MSTR

18

18

18

16

16

16

50/50

25/25

10/10

50/50

25/25

10/10

Copper Stub Out Elbow

• Connects to ASTM F1960

(Cold Expansion Style) PEX

• Closed end for pressure testing

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

PART NO.

S71000

S71001

S71002

S71003

DESCRIPTION

1/2” Cold Expansion PEX (F1960), 13” x 8”

1/2” Cold Expansion PEX (F1960), 4” x 8”

3/4” Cold Expansion PEX (F1960), 6” x 8”

1” Cold Expansion PEX (F1960), 6” x 12”

CTN/MSTR

1/50

1/50

1/25

1/25

• Connects to ASTM 1870 (Crimp Style) PEX

• Closed end for pressure testing

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

PART NO.

S72000

S72001

S72002

S72003

S72004

S72005

S72006

S72007

S72008

DESCRIPTION

1/2" Crimp PEX (F1807), 3-1/2" x 6"

1/2" Crimp PEX (F1807), 3-1/4" x 8"

1/2" Crimp PEX (F1807), 3-1/2" x 12"

1/2" Crimp PEX (F1807), 13" x 8"

3/4" Crimp PEX (F1807), 4-1/2" x 8"

3/4" Crimp PEX (F1807), 4-1/2" x 12"

3/4" Crimp PEX (F1807),13" x 6"

1" Crimp PEX (F1807), 6" x 8"

1" Crimp PEX (F1807), 6" x 12"

CTN/MSTR

1/50

1/50

1/50

1/25

1/50

1/50

1/25

1/25

1/25

• Connects to CPVC tubing (Solvent Weld)

• Closed end for pressure testing

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

PART NO.

S73000

S73001

S73002

S73003

S73004

DESCRIPTION

1/2" CPVC, 3-1/2" x 12"

1/2" CPVC, 8" x 7"

3/4" CPVC, 6" x 8"

3/4" CPVC, 6" x 12"

1" CPVC, 11" x 10"

CTN/MSTR

1/50

1/50

1/50

1/25

1/25

116 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Copper Stub Out Elbow with Mounting Flange

• Connects to ASTM F1960

(Cold Expansion Style) PEX

• Closed end for pressure testing

• Flange for nailing to a stud

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

PART NO.

S71004

S71005

S71006

S71007

DESCRIPTION

1/2" Cold Expansion PEX (F1960) Double, 7" x 8"

1/2" Cold Expansion PEX (F1960), 4" x 8"

3/4" Cold Expansion PEX (F1960), 6" x 8"

1" Cold Expansion PEX (F1960), 6" x 12"

CTN/MSTR

1/25

1/25

1/25

1/25

• Connects to ASTM 1870 (Crimp Style) PEX

• Closed end for pressure testing

• Flange for nailing to a stud

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

PART NO.

S72009

S72010

S72011

S72012

S72013

DESCRIPTION

1/2" Crimp PEX (F1807), 4" x 12"

1/2" Crimp PEX (F1807), 3-1/2" x 6"

1/2" Crimp PEX (F1807), 3-1/2" x 8"

3/4" Crimp PEX (F1807), 4-1/2" x 8"

1" Crimp PEX (F1807), 6" x 8"

CTN/MSTR

1/50

1/50

1/50

1/50

1/25

PART NO.

S73005

S73006

• Connects to CPVC tubing (Solvent Weld)

• Closed end for pressure testing

• Flange for nailing to a stud

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

DESCRIPTION

1/2" CPVC Socket, 3-1/2" x 8"

1" CPVC Socket, 11" x 10"

CTN/MSTR

1/25

1/25

Stub Outs

Copper Stub Out Tub/Shower Valve Connector

• Connects to ASTM F1960

(Cold Expansion Style) PEX

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

PART NO.

S71011

S71012

S71013

DESCRIPTION

1/2" Cold Expansion PEX (F1960) x 1/2" Male

Sweat Connection, 6"

1/2" Cold Expansion PEX (F1960) x 1/2" Male

Swivel Pipe Thread Connection, 7"

1/2" Cold Expansion PEX (F1960) x 1/2" Female

Swivel Pipe Thread Connection, 6"

CTN/MSTR

1/50

1/50

1/50

C

• Connects to ASTM 1870 (Crimp Style) PEX

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

PART NO.

S72020

S72021

S72022

DESCRIPTION

1/2" Crimp PEX (F1807) x 1/2" Male Sweat

Connection, 4"

1/2" Crimp PEX (F1807) x 1/2" Male Sweat

Connection, 6"

1/2" Crimp PEX (F1807) x 1/2" Male Sweat

Connection, 8"

CTN/MSTR

1/50

1/50

1/50

• Connects to CPVC tubing (Solvent Weld)

• Closed end for pressure testing

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

PART NO.

S73007

S73008

DESCRIPTION

1/2" CPVC Socket x ½" Male Sweat Elbow,

6" x 2-1/4"

1/2" CPVC Socket x ½" Male Sweat Elbow,

8" x 2-1/4"

CTN/MSTR

1/50

1/50

Copper Stub Out Straight

• Connects to ASTM F1960

(Cold Expansion Style) PEX

• Closed end for pressure testing

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

PART NO.

S71008

S71009

DESCRIPTION

1/2" Cold Expansion PEX (F1960) Closed End,

8" long

1/2" Cold Expansion PEX (F1960)Closed End,

15" long

CTN/MSTR

1/50

1/50

• Connects to ASTM 1870 (Crimp Style) PEX

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

PART NO.

S72014

S72015

S72016

S72018

S72019

DESCRIPTION

1/2" Crimp PEX (F1807), Closed End, 8" Long

1/2" Crimp PEX (F1807), Closed End, 12" Long

3/4" Crimp PEX (F1807), Closed End, 12" Long

1/2" Crimp PEX (F1807), Open End, 8" Long

1/2" Crimp PEX (F1807), Open End, 12" Long

CTN/MSTR

1/50

1/50

1/50

1/50

1/50

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 117

Stub Outs/Pipe Brackets

Copper Stub Out Straight with Mounting Flange

• Connects to ASTM F1960

(Cold Expansion Style) PEX

• Closed end for pressure testing

• Flange for nailing to a stud

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

C

PART NO.

S71010

PART NO.

S72017

DESCRIPTION

1/2” Crimp PEX (F1807), Closed End, 12” Long

• Connects to ASTM 1870 (Crimp Style) PEX

• Closed end for pressure testing

• Flange for nailing to a stud

• cUPC approved for use in USA and Canada

• ANSI/NSF 61 & ANSI/NSF 372 approved for drinking water

CTN/MSTR

1/50

DESCRIPTION

1/2” Crimp PEX (F1807), Closed End, 12” Long

CTN/MSTR

1/50

Hanger Straps

Flat Copper Plated Bracket

• For use on 1/2”, 3/4” or 1” copper pipe

• CARTON QUANTITIES ONLY

PART NO.

B00005

SIZE

1/2” - 1” x 20”

HR # CTN/MSTR

107-18 50/50

Flat Copper Plated Bracket

• Copper-Bonded™ steel

• For support of 1/2” and 3/4” pipes on 4” or 8” centers

• Positions copper water supplies for sinks, water closets, and other fixtures

• 25 lb. load rating

• CARTON QUANTITIES ONLY

PART NO.

B00025

SIZE

1/2” - 3/4” x 20”

HR # CTN/MSTR

150-20 50/50

Copper Plated Carrier Bracket

• Secures 1” stub out at 11-1/2” above the rim

• CARTON QUANTITIES ONLY

• Multi-hole design allows for versatility

• 18” and 26” straps accommodate most common jobs

• CARTON QUANTITIES ONLY

PART NO.

S33041

S33040

PART NO.

B00004

SIZE

5/8” x 18”

5/8” x 26”

Flat Copper Plated Bracket

PART NO.

B00003

B00021

• For use on sinks, lavatories or other fixtures

• Use for 1/2” copper pipe

• CARTON QUANTITIES ONLY

SIZE

1/2” x 20”

1/2” x 26”

Flat Copper Plated Bracket

• For use on water heater connections

• Use for 3/4” and 1” copper pipe

• CARTON QUANTITIES ONLY

SIZE

3/4” - 1” x 20”

GAUGE CTN/MSTR

14

14

100/100

100/100

HR # CTN/MSTR

101-18 50/50

101-26 50/50

HR # CTN/MSTR

102-18 50/50

PART NO. DESCRIPTION

B00022 Carrier bracket

Pipe Bracket

• 150 lb. load capacity

• Can attach to stud or directly to wall

• CARTON QUANTITIES ONLY

HR # CTN/MSTR

114-C 6/6

PART NO. DESCRIPTION

B00024 Pipe bracket

HR # CTN/MSTR

V2 25/25

Extruded Hole Copper Plated Bracket

• For use on 1/2”, 3/4” or 1” copper pipe

• Extruded holes

• CARTON QUANTITIES ONLY

PART NO.

B00006

B00019

SIZE

1/2” - 1” x 20”

1/2” - 1” x 26”

HR # CTN/MSTR

108-20

108-26

50/50

50/50

Extruded Notches Copper Plated Bracket

• For use on 1/2”, 3/4” or 1” copper pipe

• Extruded holes

• CARTON QUANTITIES ONLY

PART NO.

B00007

SIZE

1/2” - 3/4” x 20”

HR # CTN/MSTR

140 50/50

118 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Galvanized Bracket

• For use on sinks, lavatories and toilets on

16” center spuds

• For use with 1/2” and 3/4” CPVC; 1/2”,

3/4” and 1” copper or PEX

• 1-3/8” keyed holes, 20” long

• Use with B00016, B00017, B00018 and

B00013

• CARTON QUANTITIES ONLY

PART NO.

B00001

SIZE

1/2” - 1” x 20”

HR # CTN/MSTR

103-18 50/50

Turnout Bend Support for PEX

PART NO.

B00013

SIZE

3/8” - 1/2”

Pipe Brackets/Pipe Hooks

• PEX turnout bend support for potable water installations

• CARTON QUANTITIES ONLY

HR #

704

CTN/MSTR

25/100

Galvanized Lockright Pipe Bracket for CPVC

PART NO.

B00008

• For use on sinks or lavatories using CPVC

• 20 gauge galvanized steel with

1” holes on 2” centers

• Use with B00014

• CARTON QUANTITIES ONLY

SIZE

1/2” - 3/4” x 20”

HR #

601-20

CTN/MSTR

50/50

Insert for CPVC

• Fire retardant plastic

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

B00014 1/2” insert

Metal Stud Insulator

• Fire retardant plastic

• Use for copper pipe

• CARTON QUANTITIES ONLY

HR # CTN/MSTR

604 100/100

C

Galvanized Lockright Bracket

• CARTON QUANTITIES ONLY PART NO. DESCRIPTION

B00016 1/2” insulator

B00017 3/4” insulator

B00018 1” insulator PART NO.

B00020

SIZE

1/2” - 3/4” x 26”

HR # CTN/MSTR

601-26 50/50

Copper Plated Bracket for Water Closet

Drive J-Hook

• Copper clad

• CARTON QUANTITIES ONLY

• For use on 1/2” copper pipe

• For use with water closets or hose bibbs

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

H23050 1/2” x 3/4” CTS drive j-hook

PART NO.

B00002

SIZE

1/2”

HR #

109-N-6

CTN/MSTR

50/50

Galvanized L Bracket for PEX

• For use with PEX on overhead and side runs

• Use with B00013, B00016,

B00017 and B00018 inserts

• CARTON QUANTITIES ONLY

PART NO.

B00009

SIZE

1-3/8”

HR #

709L

Plastic Coated Pipe Hook

• Steel pipe hook with plastic insulation

• Coated black

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

H12054

H12056

H12074

1/2” x 4” plastic coated pipe hook

1/2” x 6” plastic coated pipe hook

3/4” x 4” plastic coated pipe hook

H12076

H12106

3/4” x 6” plastic coated pipe hook

1” x 6” plastic coated pipe hook

“Copper Boy” Pipe Hook

• CARTON QUANTITIES ONLY

CTN/MSTR

50/50

PART NO. DESCRIPTION

H10052 1/2” x 2-1/2” copper clad pipe hook

H10072 3/4” x 2-1/2” copper clad pipe hook

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

HR # CTN/MSTR

404-R

405-R

406-R

100/100

100/100

100/100

CTN/MSTR

100/100

CTN/MSTR

50/1000

50/1000

50/1000

50/1000

50/1000

CTN/MSTR

50/2200

50/500

119

Pipe Hooks/ Pipe Hangers & Straps

Pipe Hook

Plain Steel

C

H11056

H11058

H11074

H11076

H11078

H11080

H11106

H11108

H11126

H11156

H11208

H11210

PART NO.

H10054

H10056

H10058

H10074

H10076

H10078

H10080

H10106

H10108

H10110

H10126

H10128

H10156

H10158

H10208

H11054

Copper Clad

SIZE

1/2” x 4”

1/2” x 6”

1/2” x 8”

3/4” x 4”

3/4” x 6”

3/4” x 8”

3/4” x 10”

1” x 6”

1” x 8”

1” x 10”

1-1/4” x 6”

1-1/4” x 8”

1-1/2” x 6”

1-1/2” x 8”

2” x 8”

1/2” x 4”

1/2” x 6”

1/2” x 8”

3/4” x 4”

3/4” x 6”

3/4” x 8”

3/4” x 10”

1” x 6”

1” x 8”

1-1/4” x 6”

1-1/2” x 6”

2” x 8”

2” x 10”

• 10 gauge

• CARTON QUANTITIES ONLY

MATERIAL

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Plain Steel

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

CTN/MSTR

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

50/500

Galvanized Pipe Hanger for Schedule 40 Pipe

• Alternating screw and nail holes

• Load rating 250# max

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

H30001 1-1/2” galvanized pipe hanger

H30002 2” galvanized pipe hanger

H30003 3” galvanized pipe hanger

H30004 4” galvanized pipe hanger

CTN/MSTR

50/50

50/50

50/50

50/50

Vinyl Coated Pipe Hanger for Schedule 40 Pipe

• Alternating screw and nail holes

• Load rating 250# max

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

H30011 1-1/2” vinyl coated pipe hanger

H30022 2” vinyl coated pipe hanger

H30033 3” vinyl coated pipe hanger

H30044 4” vinyl coated pipe hanger

CTN/MSTR

100/100

50/50

50/50

50/50

Vinyl Coated Pipe Hanger for DWV Pipe

Pipe Straps

• Alternating screw and nail holes

• Provides maximum support

• Vinyl coating dampens noise and vibration

• Cuts installation time

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

H30005 1-1/2” (3/4” wide) vinyl coated pipe hanger

H30006 2” (3/4” wide) vinyl coated pipe hanger

H30007 3” (3/4” wide) vinyl coated pipe hanger

H30008 4” (3/4” wide) vinyl coated pipe hanger

H30012 1-1/2” (1” wide) vinyl coated pipe hanger

H30013 2” (1” wide) vinyl coated pipe hanger

H30014 3” (1” wide) vinyl coated pipe hanger

H30015 4” (1” wide) vinyl coated pipe hanger

CTN/MSTR

50/50

50/50

50/50

50/50

50/50

50/50

50/50

50/50

H13200

H13250

H13300

H13302

H13400

H130500

H15048

H15049

H15050

H15075

H15100

H15125

H15150

H15200

H16038

H16050

H16075

H16100

H13501

H13502

H13503

H13504

PART NO.

H18050

H18075

H13038

H13050

H13075

H13100

H13125

H13150

H13038

SIZE

1/2” IPS

3/4” IPS

3/8” IPS

1/2” IPS

3/4” IPS

1” IPS

1-1/4” IPS

1-1/2” IPS

2” IPS

2-1/2” IPS

3” IPS

3-1/2” IPS

4” IPS

6” IPS

1/4” CTS

3/8” CTS

1/2” CTS

3/4” CTS

1” CTS

1-1/4” CTS

1-1/2” CTS

2” CTS

3/8” CTS

1/2” CTS

3/4” CTS

1” CTS

1-1/2” IPS

2” IPS

3” IPS

4” IPS

H18050

• CARTON QUANTITIES ONLY

MATERIAL # HOLES CTN/MSTR

Galvanized

Galvanized

Galvanized

Galvanized

Galvanized

Galvanized

Galvanized

Galvanized

1

1

2

2

2

2

2

2

100/100

100/100

200/200

150/150

50/50

50/50

50/50

25/25

Galvanized

Galvanized

Galvanized

Galvanized

Galvanized

Galvanized

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Copper Clad

Solid Copper

Solid Copper

Solid Copper

Solid Copper

Vinyl Coated

Vinyl Coated

Vinyl Coated

Vinyl Coated

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

2

100/100

100/100

100/100

100/100

100/100

100/100

100/100

100/100

100/100

50/50

50/50

25/25

25/25

25/25

25/25

10/10

15/15

10/10

20/20

500/500

500/500

100/100

120 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Plastic Hanger Tape

• Flexible, non-conductive polypropylene

• .050 thick

• 1/8” diameter holes every 3/4”

• 125 lb. ultimate load ASTM A-370-77 (Not H21200)

• Can be cut with scissors or utility knife

• Uses: pipe hanger, duct hanger and tubing utility strapping

PART NO.

H21010

H21025

H21050

H21100

H21101

H21200

SIZE

3/4” x 10’

3/4” x 25’

3/4” x 50’

3/4” x 100’

3/4” x 100’ (dispenser box)

2” x 100’

CTN/MSTR

1/200

1/50

1/20

1/30

1/25

1/5

Copper Clad Nails

PART NO.

H15001

Pipe Hangers/Pipe Clamps

• CARTON QUANTITIES ONLY

SIZE

1-1/4”

Copper Coated J-Nails

MATERIAL CTN/MSTR

Copper Clad 200/2000

• CARTON QUANTITIES ONLY

PART NO.

H22050

H22075

SIZE

1/2”

3/4”

MATERIAL

Copper Clad

Copper Clad

CTN/MSTR

100/1300

100/1300

C

Perforated Hanger Iron

PART NO.

H20001

H20002

H20003

H20005

H20006

H20007

H20010

H20011

H20012

H20100

H20150

H20101

• Alternating holes (bolt and nail)

• CARTON QUANTITIES ONLY

SIZE

3/4” x 10’

3/4” x 10’

3/4” x 10’

3/4” x 50’

3/4” x 50’

3/4” x 50’

3/4” x 100’

3/4” x 100’

3/4” x 100’

3/4” x 10’

3/4” x 50’

3/4” x 10’

MATERIAL GAUGE CTN/MSTR

Galvanized 20 (heavy) 50/50

Galvanized 24 (medium) 50/50

Galvanized 28 (light)

Galvanized 20 (heavy)

50/50

10/10

Galvanized 24 (medium) 10/10

Galvanized 28 (light) 10/10

Galvanized 20 (heavy) 5/5

Galvanized 24 (medium) 10/10

Galvanized 28 (light)

Copper Clad 22 (heavy)

10/10

50/50

Copper Clad 22 (heavy) 10/10

Copper 24 (medium) 100/100

J-Hook for CTS Water System

Baby J-Hooks

PART NO. DESCRIPTION

J01050

J01075

1/2” CTS x 4” length

3/4” CTS x 4” length

J01100 1” CTS x 4” length

Long Baby J-Hooks

PART NO. DESCRIPTION

J01057

J01077

1/2” CTS x 7-1/2” length

3/4” CTS x 7-1/2” length

• Fabricated of durable ABS plastic

• Nail holes on all four sides - nails are included!

• No heat distortion even at 250°

• Eliminates corrosion and electrolysis on copper pipe

• FULL BAG QUANTITIES ONLY

BAG/CTN QTY

25/300

25/300

25/200

BAG/CTN QTY

25/200

25/200

Earthquake Strap

PART NO.

H20500

Tie Wire

• Holes are spread 1” apart on center

• CARTON QUANTITIES ONLY

SIZE

2” x 10’

GAUGE

22

CTN/MSTR

1/10

J-Hook for Drain Pipe System

• Fabricated of durable ABS plastic

• Nails included

• Reduces installation time

• Glueable with universal cement

• Designed for PVC and ABS pipe

• Calibrated for 1/8” fall per foot - no more measuring & adjusting for fall

• UPC listed

• FULL BAG QUANTITIES ONLY

PART NO. DESCRIPTION

J01150 1-1/2” DWV x 7” length

J01200 2” DWV x 7” length

J01300 3” DWV x 7” length

J01400 4” DWV x 7” length

BAG/CTN QTY

25/300

25/300

25/300

25/300

PART NO.

S33200

• Anealled and rolled to assure

easily workable

• Ideal for securing rebar in place

before pouring concrete

• CARTON QUANTITIES ONLY

SIZE

400’

GAUGE

16

CTN/MSTR

20/20

Full Clamp

• Plastic clamp with preloaded nail for copper, CPVC, polybutylene tubing

• CARTON QUANTITIES ONLY

PART NO. TUBING SIZE

H25050 1/2”

H25075 3/4”

H25100 1”

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

100/4000

50/2000

25/1025

121

Pipe Clamps/Lead Supplies

Half Clamp

• Plastic clamp with preloaded nail for copper, CPVC, polybutylene tubing

• CARTON QUANTITIES ONLY

PART NO. TUBING SIZE

H24038 3/8”

H24050 1/2”

H24075 3/4”

H24100 1”

CTN/MSTR

100/7500

50/1000

50/1000

50/2000

C

Insulating/Suspension Clamp

• Plastic insulating and suspension clamp in one

• Eliminates noise from tubing expansion and contraction

• For copper, CPVC and polybutylene tubing

• CARTON QUANTITIES ONLY

PART NO. TUBING SIZE

H26050 1/2”

H26075 3/4”

H26100 1”

H26125 1 1/4”

H26150 1 1/2”

H26200 2”

CTN/MSTR

50/1000

50/1000

50/600

50/500

25/500

25/350

Pipe Insulator

• Plastic insulator eliminates noise from expansion and contraction

• For copper, CPVC and polybutylene tubing

• Drill hole size 1 3/8”

• UPC listed

• CARTON QUANTITIES ONLY

PART NO. TUBING SIZE

H27050 1/2”

H27075 3/4”

H27100 1”

CTN/MSTR

25/1000

25/1000

25/1000

2-Hole Pipe Clamp

• Plastic clamp eliminates noise from tubing expansion and contraction

• Supports copper, CPVC and polybutylene tubing

• CARTON QUANTITIES ONLY

PART NO. TUBING SIZE

H28050 1/2”

H28075 3/4”

H28100 1”

H28125 1 1/4”

H28150 1 1/2”

H28200 2”

CTN/MSTR

100/1000

100/1000

50/500

50/750

25/500

25/250

F.H.A. Tub Hanger

• 12 gauge galvanized steel

• Adjustable on stud

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

T12001 Tub Hanger

CTN/MSTR

100/100

Metal Stud Pipe Insulator

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

H29000 3/8”, 1/2”, 3/4”

H29010 1”

Mason’s Nylon Twine

• Twisted yellow twine

• Approximately 165 lb. break strength

PART NO. DESCRIPTION

T60001 #18 x 225’ nylon twine

T60000 #18 x 1100’ nylon twine

Candle Wick Packing

• Medium packing in 2 ounce balls

CTN/MSTR

50/500

50/500

CTN/MSTR

24/192

12/72

PART NO. DESCRIPTION

T60003 Candle wick packing

Graphite Packing

• Non-asbestos material in resealable spools

• Up to 150°F

CTN/MSTR

12/396

PART NO. DESCRIPTION

T60005 1/8” diameter x 12’ spool

T60006 1/4” diameter x 8’ spool

CTN/MSTR

12/120

12/120

Oakum

• The original Oakum with benonite-expands over 10 times when wet

• Baled in coils or cut length for easy use

• No tar in brown oakum

• CARTON QUANTITIES ONLY (except 1 lb. bags)

PART NO. DESCRIPTION

O15001 Brown random cut

O15002 White 3/8” cord

INNER PACK CTN/MSTR

10 - 5 lb. bags

6 - 10 lb. coils

10/10

6/10

O15003 White 3/8” cord (27” cut length) 10 - 5 lb. bags

O15006 Brown random cut 1 lb. bags

O15007 White 3/8” cord (27” cut length) 1 lb. bags

10/10

1/20

1/20

122

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Lead Wool

PART NO. DESCRIPTION

L40001 5 lbs. lead wool

Lead Ingot

PART NO. DESCRIPTION

D02001 Cover and gasket

D02002 Gasket only

P55300 Rough brass cover

Trap Covers

• Five pound box

L42002 L42052

PART NO. DESCRIPTION

L40002 25 lbs. (Handle with four 5 lb. plugs)

L42052 5 lbs.

Lead Melting Pot

• Wire handle

• 3” depth

PART NO. DESCRIPTION

L42006 6” pot

L42008 8” pot

Lead Pouring Ladle

• Wrought steel

PART NO. DESCRIPTION

L42102 3” ladle

L42103

L42104

3-1/2” ladle

4” ladle

Drum Trap Cover

• Flanged, plated die cast

• Cover supplied with gasket

C98001 C98002

PART NO. DESCRIPTION

C98001 5-3/4” flat SS trap cover

C98002 5-3/4” raised SS trap cover

• Stainless steel

CTN/MSTR

1/10

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

Lead Supplies/Roofing Repair

Wet-R-Dri Roofing Cement

• All-weather plastic

• Chemically fortified to bond to water-covered, damp or dry surfaces

• Great for emergency repairs under wet conditions

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

C09000 5 gallon can

C09001 1 gallon can

C09002 10.5 ounce cartridge

CTN/MSTR

1/1

6/6

12/12

Foundation and Roof Coating

• Non-fibered liquid damp-proof seal

• All weather plastic

• Chemically fortified to bond to water covered, damp or dry surfaces

• Great for emergency repairs under wet conditions

C

PART NO. DESCRIPTION

C09003 1 gallon can

CTN/MSTR

6/6

Sewage Ejector/Sump Pump Check Valve

• Couplings are sized for IPS ID hose

• Combination unit for 1-1/2” and 1-1/4” IPS, 1-1/2” copper

PART NO. DESCRIPTION

C29150 1-1/2” slip x 1-1/2” slip

C29200 2” slip x 2” slip

C29126 1-1/4” slip x 1-1/2” slip

CTN/MSTR

1/50

1/50

1/50

Flexible Discharge Hose

• Ideal for sump pumps, centrifugal pumps, and submersible pumps

• Kits include 24’ hose, threaded adapter and steel clamp

CTN/MSTR

1/100

1/50

1/50

CTN/MSTR

25/100

25/100

1/60

PART NO. DESCRIPTION

C29123 1-1/2” flex dichage hose kit

C29124 1-1/4” flex dichage hose kit

CTN/MSTR

1/5

1/5

Rooftite ® Hi-Heat Silicone Flashing

• Silicone range is designed for high temperature applications up to 390°F

• Ideal for corrugated metal roofs

• Can be used on flat roofs

• Pipe diameter markings

• For plumbing, heating, air conditioning, electrical or exhaust vents

• Pleated cone adjusts to any pitch up to 45° F

• Ozone and UV resistant

PART NO. DESCRIPTION

R16100 0” - 2-3/4”

R16101 2” - 6-1/8”

R16107 6” - 10-1/32”

R16108 9-1/2” - 14-3/4”

CTN/MSTR

1/25

1/20

1/10

1/10

CTN/MSTR

150/300

50/200

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 123

Roof Repair/Service Sink Repair

C

Rooftite ® Roof Flashing

• Made of EPDM with flexible aluminum base

• -30°F to +250°F

• Ideal for corrugated metal roofs

• Can be used on flat roofs

• Pipe diameter markings

• For plumbing, heating, air conditioning, electrical or exhaust vents

• Pleated cone adjusts to any pitch

• Ozone and UV resistant

PART NO. DESCRIPTION

R15109 0” - 1-1/4”

R15100 0” - 2-3/4” pipe

R15101 2” - 6-1/8” pipe

R15107 6” - 10-1/32” pipe

R15108 9-1/2” - 14-3/4” pipe

CTN/MSTR

1/20

1/20

1/20

1/10

1/10

Galvanized Roof Flashing

• Double seal neoprene collar

• UPC listed, BOCA ad SBCCI approved

PART NO.

R40150

R40200

R40300

R40400

DESCRIPTION

1-1/4” and 1-1/2”

2”

3”

4”

Aluminum Roof Flashing

• Double seal neoprene collar

PART NO.

DESCRIPTION

R45150 1-1/4” and 1-1/2”

R45200

R45300

2”

3”

R45400 4”

FLANGE

8-3/4” x 12-1/2”

8-3/4” x 12-1/2”

10-3/4” x 14-1/2”

12” x 16”

FLANGE

8-3/4” x 12-1/2”

8-3/4” x 12-1/2”

10-3/4” x 14-1/2”

12” x 16”

All Neoprene Roof Flashing

• Double seal neoprene collar

Neo-poly Roof Flashing

• Poly vinyl base

• Neoprene collar

PART NO.

DESCRIPTION

R57150 1-1/4” and 1-1/2”

R57200

R57300

R57400

2”

3”

4”

FLANGE

9-1/4” x 13”

9-1/4” x 13”

11-1/8” x 15”

12” x 15-1/2”

CTN/MSTR

1/12

1/12

1/12

1/12

CTN/MSTR

1/12

1/12

1/12

1/12

CTN/MSTR

1/12

1/12

1/12

1/12

Lead Roof Flashing

• Southeastern Code

• 2-1/2 pounds

• Multi-pitch from flat to 7/12”

• CARTON QUANTITIES ONLY

PART NO.

DESCRIPTION

R70150 1-1/2”

R70200

R70300

R70400

2”

3”

4”

FLANGE

8-1/2” x 10-1/2”

8-1/2” x 10-1/2”

10-1/2” x 11-1/2”

10-1/2” x 11-1/4”

CTN/MSTR

12/12

12/12

6/6

6/6

Instant Sealant

• Flame resistant

• Fills holes and cracks

• Deadens sound

• Insulates against air conditioning and heat loss

• Prevents passage of dirt, water and insects

• Both 12 and 24 oz. cans spray in any position

• UPS GROUND AND MOTOR FREIGHT ONLY

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

S30012 12 oz. cans

S30024 24 oz. cans

CTN/MSTR

12/12

12/12

Hose and Hose Bracket for Service Sink

• Heavy duty 300 cloth-reinforced 5/8” rubber hose

(2-1/2” long)

• 3/4” brass hose coupling at one end

• 5” x 3” stainless steel bracket with rubber grip

PART NO. DESCRIPTION

M05001 Hose with bracket

M05005 Bracket only

CTN/MSTR

1/1

1/100

PART NO.

DESCRIPTION

R50150 1-1/4” and 1-1/2”

R50200

R50300

R50400

2”

3”

4”

FLANGE

9” x 11-3/8”

9” x 11-3/8”

10” x 13-1/4”

12” x 14-3/4”

CTN/MSTR

1/20

1/20

1/20

1/20

Mop Hanger for Service Sink

• 24” x 3” stainless steel hanger with three rubber tool grips

• Anchors included

PART NO. DESCRIPTION

M05003 Mop hanger

CTN/MSTR

1/5

124

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Bolts/Screws

Stove Bolt with Nut

• Zinc plated

• CARTON QUANTITIES ONLY

PART NO. SIZE

F33009 3/16” x 3/4”

F33010

F33011

1/4” x 3/4”

1/4” x 1”

F33012

F33013

F33014

1/4” x 1-1/4”

1/4” x 1-1/2”

1/4” x 2”

CTN/MSTR

100/100

100/100

100/100

100/100

100/100

100/100

Flat Phillips Head Brass Wood Screw

• Solid brass construction

• CARTON QUANTITIES ONLY

PART NO. SIZE

F33300 #12 x 1-1/4”

F33301

F33302

F33303

#12 x 1-1/2”

#12 x 2”

#14 x 1-1/4”

CTN/MSTR

100/100

100/100

100/100

100/100

Toggle Bolt

Toggle Bolt Toggle Wing

PART NO. DESCRIPTION

F33060

F33061

3/16” x 4” toggle bolt

1/4” x 3” toggle bolt only

F33062

F33063

F33064

F33065

1/4” x 4” toggle bolt only

1/4” x 6” toggle bolt only

3/8” x 4” toggle bolt only

3/8” x 6” toggle bolt only

F33066

F33067

F33068

F33069

3/16” toggle wing only

1/4” toggle wing only

3/8” toggle wing only

1/2” toggle wing only

Hex Head Tapping Screw

• Zinc plated

• Spring loaded wing

• CARTON QUANTITIES ONLY

CTN/MSTR

50/50

50/50

50/50

50/50

50/50

50/50

100/100

100/100

100/100

100/100

• Zinc plated

• CARTON QUANTITIES ONLY

C

Phillips Head Wood Screw

• Zinc plated

• CARTON QUANTITIES ONLY

PART NO. SIZE

F33030 #10 x 1-1/2”

F33031

F33032

#12 x 1”

#12 x 1-1/4”

F33033

F33034

F33035

#12 x 1-1/2”

#12 x 2”

#12 x 2-1/2”

#12 x 3” F33036

F33037

F33038

F33039

F33040

F33041

#14 x 1-1/4”

#14 x 1-1/2”

#14 x 2”

#14 x 2-1/2”

#14 x 3”

CTN/MSTR

100/100

100/100

100/100

100/100

100/100

100/100

100/100

100/100

100/100

100/100

100/100

100/100

PART NO. SIZE

F33101 #7 x 1/2”

F33102

F33103

F33104

#7 x 1/2”

#8 x 1/2”

#8 x 1/2”

F33105

F33106

F33107

F33108

F33109

F33110

F33111

#8 x 3/4”

#8 x 3/4”

#8 x 1”

#8 x 1”

#8 x 1-1/2”

#8 x 1-1/2”

#8 x 2”

#8 x 2” F33112

F33113

F33114

F33115

F33116

#10 x 3/4”

#10 x 3/4”

#10 x 1”

#10 x 1”

Drill Point Tech Screw

Hex Head Lag Screw

• CARTON QUANTITIES ONLY

PART NO. SIZE

F33140

F33141

3/8” x 1”

3/8” x 1-1/2”

F33142

F33143

F33144

3/8” x 2”

3/8” x 2-1/2”

3/8” x 3”

E-Z Anchor/Self-Drilling Wall Board

• Die cast zinc

• Installs with #2 Phillips screwdriver

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

A33010 E-Z Anchor with 1-1/4” screws

CTN/MSTR

100/100

100/100

100/100

50/50

50/50

CTN/MSTR

10/10

PART NO. SIZE

F33120

F33121

F33122

#8 x 1/2”

#8 x 1/2”

F33123

F33124

#8 x 3/4”

#8 x 3/4”

#10 x 3/4”

F33125

F33126

F33127

F33128

#10 x 3/4”

#10 x 1”

#10 x 1”

#10 x 1-1/2”

F33129

F33130

F33131

F33132

#12 x 3/4”

#12 x 1”

#12 x 1-1/2”

#12 x 2”

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

• CARTON QUANTITIES ONLY

CTN/MSTR

100/100

1000/1000

100/100

1000/1000

100/100

1000/1000

100/100

500/500

50/50

500/500

50/50

250/250

100/100

1000/1000

100/100

500/500

CTN/MSTR

100/100

500/500

100/100

500/500

100/100

500/500

100/100

500/500

100/100

100/100

100/100

100/100

100/100

125

Washers/Clamps/Hangers

Hex Nut

PART NO. SIZE

F33080 1/4” - 20

F33081

F33082

F33083

5/16” - 18

3/8” - 16

1/2” - 13

• Zinc plated

• CARTON QUANTITIES ONLY

C

Anchor Bolt Kit

CTN/MSTR

100/100

100/100

100/100

50/50

• Includes anchors, hex head screws and drill bit

Universal Beam Clamp

• 3/8” UNC bolt thread

• Steel set screw

PART NO.

H60375

H60050

H60625

SIZE

3/8”

1/2”

5/8”

ROD SIZE

3/8”

1/2”

5/8”

MAX LOAD CTN/MSTR

500 lbs.

800 lbs.

1130 lbs.

1/25

1/25

1/25

Copper Pipe Hanger - Bell & Milford Types

• Copper clad

PART NO.

A33001

A33002

A33005

SIZE

#8 x 1”

#10 x 1-1/4”

#14 x 1-1/2”

PIECES

100

100

50

Hollow Wall Anchor Kit

DRILL BIT

3/16”

1/4”

5/16”

CTN/MSTR

1/50

1/36

1/36

Bell Type Milford Type

PART NO.

DESCRIPTION

H83050 1/2” bell type

H83075

H83100

3/4” bell type

1” bell type

H84050

H84075

H84100

H85050

H85075

1/2” x 6” milford type

3/4” x 6” milford type

1” x 6” milford type

1/2” x 12” milford type

3/4” x 12” milford type

CTN/MSTR

25/500

25/500

25/500

1/25

1/25

1/25

1/25

1/25

• 100 pieces

• 4 sizes and styles

• Anchors, screws and toggle bolts

• Reclosable, reusable, divided plastic container

PART NO. DESCRIPTION

A33006 100 piece hollow wall anchor kit

CTN/MSTR

12/72

Conduit Hanger

• Packed with bolts and nuts

Fender Washer

PART NO.

F33098

F33096

F33097

Flat Washer

PART NO.

F33094

F33095

• Zinc plated

• CARTON QUANTITIES ONLY

SIZE

1/4”

3/8”

1/2”

OD

1-1/2”

1-1/2”

2”

• Zinc plated

• CARTON QUANTITIES ONLY

SIZE

3/8”

1/2”

OD

1”

1-3/8”

Carrier Nuts and Washer Set

• 4 aluminum nuts and plastic washers

• 5/8 - 11 threads

• Much lower cost than specification companies

CTN/MSTR

100/100

100/100

100/100

CTN/MSTR

100/100

100/100

Zinc Plated

PART NO.

CODE NO.

H14050

H14075

0

1

H14100

H14125

H14150

H14200

H14250

H14300

H14400

2

3

4

5

6

7

9

Copper Plated

PART NO.

CODE NO.

H17050

H17075

H17100

H17125

H17150

0

1

2

3

H17200

H17250

4

5

6

H17300

H17350

H17400

7

8

9

RIGID

1/2”-3/8”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

4”

RIGID

1/2”-3/8”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

3-1/2”

4”

THIN WALL

1/2”

3/4”

1”

-

1-1/2”

2”

-

-

-

THIN WALL

1/2”

3/4”

1”

-

1-1/2”

2”

-

-

-

-

CTN/MSTR

1/100

1/50

1/50

1/50

1/25

1/25

1/10

1/10

1/10

CTN/MSTR

1/100

1/100

1/50

1/50

1/25

1/25

1/25

1/25

1/25

1/25

PART NO. DESCRIPTION

C56100 Carrier nuts and washer set (4-pack)

CTN/MSTR

1/100

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

126 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Hangers

Swivel Ring Riser Clamp

• Supplied with nuts

• For Schedule 40 iron pipe only - Not for soil pipe

Zinc Plated

PART NO.

H65050

H65075

H65100

H65125

H65150

H65200

H65250

H65300

H65400

H65500

H65600

Copper Plated

PART NO.

H66050

H66075

H66100

H66125

H66150

H66200

H66250

H66300

H66400

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

4”

5”

6”

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

4”

ROD SIZE

3/8”

3/8”

3/8”

3/8”

3/8”

1/2”

1/2”

1/2”

1/2”

1/2”

1/2”

ROD SIZE

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”-

Zinc Plated Clevis Hanger

PART NO.

H68050

H68075

H68100

H68125

H68150

H68200

H68250

H68300

H68350

H68400

H68500

H68600

H68800

Standard - 401# Steel

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

3-1/2”

6”

8”

4”

5”

Light Duty - 400# Steel

PART NO.

H69050

H69075

H69100

H69150

H69200

H69250

H69300

H69400

SIZE

1/2”

3/4”

1”

1-1/2”

2”

2-1/2”

3”

4”

ROD SIZE

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

1/2”

1/2”

1/2”

5/8”

5/8”

3/4”

7/8”

ROD SIZE

3/8”

3/8”

3/8”

3/8”

3/8”

1/2”

1/2”

5/8”

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/20

1/20

1/10

1/10

1/5

1/5

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/20

1/20

1/10

1/10

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/20

1/20

1/10

1/10

1/10

1/5

1/5

1/5

CTN/MSTR

1/25

1/25

1/25

1/25

1/20

1/20

1/10

1/10

PART NO.

H70050

H70075

H70100

H70125

H70150

H70200

H70250

H70300

H70350

H70400

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

3-1/2”

4”

Hinged Split Ring

Zinc Plated for Iron Pipe

PART NO.

H72375

H72050

H72075

H72100

H72125

H72150

H72200

H72250

H72300

H72400

Copper Plated for Copper Tube

SIZE

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

4”

PART NO.

H73375

H73050

H73075

H73100

H73125

H73150

H73200

SIZE

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

Ceiling Flange

PART NO. SIZE

H80375 3/8” plain finish (black)

H80050 1/2” plain finish (black)

H81375 3/8” zinc finish (galvanized)

H81050 1/2” zinc finish (galvanized)

H82375 3/8” copper finish

H82050 1/2” copper finish

OVERALL WIDTH

9-3/8”

9-3/8”

9-3/8”

10”

10-3/8”

10-7/8”

11-1/4”

11-3/4”

13-1/4”

13-1/2”

ROD SIZE

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

1/2”

1/2”

1/2”

ROD SIZE

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/25

1/10

1/10

1/10

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/20

1/20

1/10

1/10

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

1/10

A

DIMENSIONS

B C

2” 1-3/8” 2-3/4”

CTN/MSTR

1/25

1/25

1/25

1/25

1/25

1/25

C

127

Water Meter Supplies/Meter Boxes

Threaded Steel Rod

• Priced per rod

• CARTON QUANTITIES ONLY

C

PART NO. DESCRIPTION

T38006 3/8” x 6’ plain finish (black)

T38010

T12006

3/8” x 10’ plain finish (black)

1/2” x 6’ plain finish (black)

T12010

T38106

T38110

T12106

T12110

1/2” x 10’ plain finish (black)

3/8” x 6’ zinc finish (galvanized)

3/8” x 10’ zinc finish (galvanized)

1/2” x 6’ zinc finish (galvanized)

1/2” x 10’ zinc finish (galvanized)

Drop-In Concrete Anchor

• Priced per rod

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

T38038

T12050

3/8” drop-in anchor

1/2” drop-in anchor

Rod Coupling Nut

• Hex, zinc plated, carbon steel

PART NO. DESCRIPTION

R60001 1/4” x 7/8” rod coupling nut

R60002 3/8” x 1-3/4” rod coupling nut

R60003 1/2” x 1-3/4” rod coupling nut

R60004 5/8” x 2-1/8” rod coupling nut

Water Meter Box Keys and Covers

CTN/MSTR

1/25

1/25

1/12

1/12

1/25

1/25

1/12

1/12

M07001 M07002 M25900

M25900 bottom view

PART NO. DESCRIPTION

M07001 Meter box key

CTN/

MSTR

1/100

M07002 Combination key and wrench 1/50

M25900

Penta head meter box and roadway box wrench

1/100

Water Meter Coupling Complete

• Heavy cast brass

• Complete with gasket

• Lead Free

PART NO.

SIZE

M20058

M20075

M20100

1/2”

3/4”

1”

NPSM LENGTH

3/4”

1”

1-1/4”

2-3/8”

2-1/2”

2-5/8”

NPT

1/2”

3/4”

1”

CTN/MSTR

1/100

25/100

25/100 CTN/MSTR

100/900

50/500

Gasket Only for Water Meter Couplings

• 3/32” thick

• CARTON QUANTITIES ONLY

PART NO. DESCRIPTION

M20581 5/8” gasket for coupling

M20751 3/4” gasket for coupling

M20101 1” gasket for coupling

CTN/MSTR

25/25

25/25

25/25

CTN/MSTR

50/1000

50/1000

50/1000

50/200

10” Economy Plastic Water Meter Box

• Snap-in green lid

• 96 per pallet

• Drop in reader cover

PART NO.

DESCRIPTION CTN/MSTR

M06001

M06002

10” rectangular box and green lid

10” green snap-in lid only

Note: All items shown are for non-vehicular applications. Concrete and asphalt installations are not recommended for plastic parts.

1/96

1/360

128

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

12” Plastic Water Meter Box

Meter Boxes

12” Plastic Standard Water Meter Box with Plastic Lid and Cast Iron Reader

PART NO.

DESCRIPTION

M12001 12” box and solid green lid

M12002

M12022

M12003

12” box and black reader lid

12” box and black lid marked “sewer”

M12005

M12006

6” extension

12” solid green lid only

12” black reader lid only

CTN/MSTR

1/72

1/72

1/72

1/42

1/216

1/216

M12009 12” box and solid black lid

Note: All items shown are for non-vehicular applications. Concrete and asphalt installations are not recommended for plastic parts.

1/72

• 72 per pallet

• Drop in reader lid

PART NO.

M12004

DESCRIPTION

12” box with plastic lid & black cast iron reader

CTN/MSTR

1/72

Note: All items shown are for non-vehicular applications. Concrete and asphalt installations are not recommended for plastic parts.

C

12” Plastic Irrigation Box

12” Plastic Water Meter Box with Solid

Cast Iron Lid

• Drop in solid lid

PART NO.

DESCRIPTION

M12100 12” box with black solid cast iron lid

M12085 Black cast iron lid only

Note: All items shown are for non-vehicular applications. Concrete and asphalt installations are not recommended for plastic parts.

CTN/MSTR

1/72

1/230

• 6” deep

• Drop in solid lid or overlapping reader lid available

PART NO.

DESCRIPTION

M12007

M12005

12” box with green lid

12” solid green lid only

CTN/MSTR

M12006 12” black reader lid only

Note: All items shown are for non-vehicular applications. Concrete and asphalt installations are not recommended for plastic parts.

1/1

1/1

1/1

15” Jumbo Water Meter Box

PART NO.

DESCRIPTION

M15001

M15009

M15002

15” box and green solid lid

6” extension for M15001

15” box and black reader lid

CTN/MSTR

1/48

1/36

1/48

M15005 15” black reader lid only

Note: All items shown are for non-vehicular applications. Concrete and asphalt installations are not recommended for plastic parts.

1/96

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 129

Boxes

6” Residential Valve Box

Emitter Knockout

(Both Sides)

1” Diameter

9”

6 1 / 8 ” Cover Lift Hole

COVER WEIGHT

6 oz.

1 5 / 8 ”

6 1 / 8 ”

Marking

Snap Lock

Tab

2 1 / 4 ” x 2 9 / 16 ” Pipe Slot (2 Places)

C • 9” deep

• Snap-in green lid

• Overlapping cover keeps dirt or grass from between body and lid

• Valve box can be extended with any 6” plastic or iron pipe

PART NO.

DESCRIPTION

M06006 6” valve box with green lid

CTN/MSTR

M06007 6” green snap-in lid only

Note: All items shown are for non-vehicular applications. Concrete and asphalt installations are not recommended for plastic parts.

1/36

1/10

10” Round Valve Box

Molded In

Nut Receptor

10”

10”

Marking

Recessed

Bolt Locator

COVER WEIGHT

1 1 / 8 ”

12 3 /

4

1 1 / 8 ”

Snap

Lock Tab

2 1 /

4

” Pipe Slot (2 Places)

• Snap-in green lid

• Overlapping cover keeps dirt or grass from between body and lid

• 96 per pallet

10”

Cover Lift Hole

PART NO.

DESCRIPTION

M06010 10” round body and snap-in green lid

CTN/MSTR

Note: All items shown are for non-vehicular applications. Concrete and asphalt installations are not recommended for plastic parts.

1/96

Shipping Boxes

• 32 ECT board test

• Kraft (brown)

• 200 pound burst strength

• BUNDLE QUANTITIES ONLY

PART NO.

BOX011

BOX008

BOX006

Bin Boxes

SIZE

11-1/8”L x 11-1/8”W x 9-1/8”D

8”L x 8”W x 8”D

6”L x 6”W x 8”D

CTN/MSTR

1/20

1/20

1/20

Plastic Tub Box

PART NO.

T40001

T40002

SIZE

13”L x 13”W x 7”D

12”L x 8-1/8”W x 6-1/2”D

Cardboard Tub Box

PART NO.

T40003

T40004

T40005

T40007

T40008

CTN/MSTR

1/100

1/150

SIZE

12”L x 8”W x 8-1/2”D wax coated

14-1/2”L x 11-5/16”W x 6”D wax coated

15”L x 12”W x 9”D non-coated

12”L x 12”W x 9”D non-coated

12”L x 12”W x 12”D non-coated

CTN/MSTR

1/10

1/10

1/10

1/10

1/10

PART NO.

BIN004

BIN005

BIN008

BIN012

130

SIZE

4-1/4”W x 12-1/2”L x 6-1/2”H

5-1/2”W x 12”L x 6”H

9”W x 12-1/2”L x 8”H

12-3/4”W x 12-1/2”L x 9-1/4”H

CTN/MSTR

1/20

1/20

1/20

1/20

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

FITTINGS & VALVES

Brass Compression Fittings ................................................... 133-134

Chrome Plated Compression Fittings ............................................ 134

45° Flare Tube Fittings ......................................................... 135-136

Space Heater & Gas Range Fittings ............................................. 137

Yellow Brass Pipe Fittings ..................................................... 138-139

PEX Fittings ......................................................................... 140-141

Push On Fittings .................................................................. 142-145

Red Brass Pipe Fittings ......................................................... 146-147

Bronze Pipe Fittings ............................................................. 148-149

Chrome Plated Pipe Nipples & Fittings ......................................... 150

Brass Garden Hose Fittings .................................................. 151-152

Brass Hose Barbs ....................................................................... 153

Nylon Fittings ...................................................................... 154-155

Poly Insert Fittings ....................................................................... 156

Red Brass Insert Fittings............................................................... 157

Galvanized Insert Fittings ............................................................ 158

Brass Needle Valves ................................................................... 159

Shut-Off Valves .......................................................................... 160

Drain Cocks/Air Cocks ............................................................... 161

Ball Valves .......................................................................... 162-164

Radiator Accessories .................................................................. 164

Hose Bibbs ................................................................................ 165

Gear Clamps ...................................................................... 165-166

Flange Connection Gaskets & Kits ........................................ 167-168

Rubber Sheet/Gasket Material .................................................... 168

Water Hammer Arresters ..................................................... 169-170

*Published December 2019

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Fittings and Valves

D

131

Compression Cap

Style 61C

PART NO.

C74001LF

C74002LF

C74147LF

C74155LF

Compression Sleeve

Style 60

TUBE SIZE

1/4”

3/8”

1/2”

5/8”

• CARTON QUANTITIES ONLY

PART NO.

C74003

C74004

C74005

C74006

C74007

C74008

C74009

C74010

C74011

TUBE SIZE

1/8”

3/16”

1/4”

5/16”

3/8”

1/2”

5/8”

3/4”

7/8”

CTN/MSTR

500/1000

500/1000

1/1

1/1

CTN/MSTR

10/2000

10/2000

10/2000

10/2000

5/2000

5/2000

5/2000

5/1000

3/1005

Compression Union

Style 62

• Lead Free

PART NO.

C74021LF

C74022LF

C74023LF

C74025LF

C74026LF

C74027LF

C74029LF

C74030LF

C74031LF

C74032LF

C74033LF

Compression Tee

Style 64

• Lead Free

PART NO.

C74034LF

C74036LF

C74037LF

C74038LF

C74039LF

TUBE SIZE

1/8”

3/16”

1/4”

3/8”

1/2”

5/8”

7/8”

3/8” x 1/4”

1/2” x 3/8”

5/8” x 3/8”

5/8” x 1/2”

TUBE SIZE

1/4”

3/8”

3/8” x 3/8” x 1/4”

1/2”

5/8”

Compression x FIP Branch Tee

Style 78

• Lead Free

PART NO.

C74091LF

TUBE x FIP

3/8” x 1/8”

Compression Nut

PART NO.

C74012

C74013

C74014

C74015

C74016

C74152

C74017

C74018

C74019

C74020

TUBE SIZE

1/8”

3/16”

1/4”

5/16”

3/8”

7/16”

1/2”

5/8”

3/4”

7/8”

CTN/MSTR

10/1000

10/1000

10/2000

10/1000

5/2000

1/25

5/1000

5/1000

5/400

3/300

Compression x Sweat Adapter

Style 666

• Lead Free

PART NO.

C74093LF

TUBE x OD

3/8” x 5/8”

(1/2” swt)

Delrin Compression Sleeve

Style 60P

• CARTON QUANTITIES ONLY

PART NO.

C74096

C74097

C74098

C74099

TUBE SIZE

1/4”

3/8”

1/2”

5/8”

Compression Insert

Style 63P

• Lead Free

• CARTON QUANTITIES ONLY

PART NO.

C74100LF

C74101LF

C74102LF

C74103LF

TUBE SIZE

1/4”

3/8”

1/2”

5/8”

CTN/MSTR

100/100

100/100

100/100

50/50

CTN/MSTR

100/2000

100/2000

10/2000

10/2000

Compression x FIP Connector

Style 66

• Lead Free

PART NO.

C74045LF

C74046LF

C74113LF

C74114LF

C74048LF

C74049LF

C74050LF

C74051LF

C74052LF

C74053LF

C74054LF

C74118LF

C74055LF

TUBE x FIP

1/4” x 1/8”

1/4” x 1/4”

1/4” x 3/8”

1/4” x 1/2”

3/8” x 1/8”

3/8” x 1/4”

3/8” x 3/8”

3/8” x 1/2”

1/2” x 3/8”

1/2” x 1/2”

5/8” x 1/2”

5/8” x 3/4”

7/8” x 3/4”

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

10/300

10/300

10/500

5/500

100/400

5/250

3/102

10/300

5/300

5/300

5/300

D

CTN/MSTR

10/300

5/300

10/300

50/200

5/200

CTN/MSTR

1/1

CTN/MSTR

5/200

CTN/MSTR

10/200

10/200

10/200

10/200

200/800

10/200

5/200

5/200

100/400

100/400

5/200

3/201

3/201

133

D

Compression x MIP Connector

Style 68

• Lead Free

PART NO.

C74121LF

C74058LF

C74059LF

C74060LF

C74123LF

C74063LF

C74064LF

C74065LF

C74066LF

C74067LF

C74068LF

C74069LF

C74070LF

C74146LF

C74071LF

C74072LF

C74149LF

C74073LF

Compression Elbow

Style 65

• Lead Free

Style 70

134

PART NO.

C74040LF

C74041LF

C74042LF

C74043LF

C74044LF

C74112LF

• Lead Free

PART NO.

C74078LF

C74131LF

PART NO.

C74081LF

C74082LF

C74135LF

C74136LF

C74085LF

C74086LF

C74087LF

C74088LF

C74089LF

C74090LF

• Lead Free

PART NO.

C74158LF

TUBE x MIP

1/8” x 1/8”

1/4” x 1/8”

1/4” x 1/4”

1/4” x 3/8”

1/4” x 1/2”

3/8” x 1/8”

3/8” x 1/4”

3/8” x 3/8”

3/8” x 1/2”

3/8” x 3/4”

1/2” x 1/4”

1/2” x 3/8”

1/2” x 1/2”

5/8” x 3/8”

5/8” x 1/2”

5/8” x 3/4”

7/8” x 1/2”

7/8” x 3/4”

TUBE SIZE

1/4”

3/8”

1/2”

5/8”

5/8” x 3/8”

7/8”

Compression x FIP Elbow

TUBE x FIP

3/8” x 1/2”

1/2” x 3/8”

Compression x MIP Elbow

Style 69

• Lead Free

TUBE x MIP

1/4” x 1/8”

1/4” x 1/4”

1/4” x 3/8”

1/4” x 1/2”

3/8” x 1/4”

3/8” x 3/8”

3/8” x 1/2”

1/2” x 3/8”

1/2” x 1/2”

5/8” x 1/2”

Pilot Line Breakaway Nut

DESCRIPTION

1/4” OD

5/200

3/201

5/200

5/200

5/200

5/200

5/200

3/201

3/120

3/201

CTN/MSTR

10/200

10/200

250/1000

10/200

10/200

10/200

10/200

5/200

CTN/MSTR

10/300

5/300

5/200

5/200

100/200

50/100

CTN/MSTR

5/200

5/200

CTN/MSTR

10/200

10/200

10/200

10/200

10/200

5/200

5/200

5/200

125/250

100/200

CTN/MSTR

10/200

Chrome Plated Compression Nut

• Lead Free

PART NO.

C74095

SIZE

1/2”

CTN/MSTR

50/400

Chrome Plated Compression Union

• Lead Free

PART NO.

N62006LF

N62086LF

N62106LF

TUBE SIZE

3/8”

1/2” x 3/8”

5/8” x 3/8”

CTN/MSTR

250/500

100/400

50/200

Chrome Plated Compression Elbow

• Lead Free

PART NO.

N65106LF

TUBE SIZE

5/8” x 3/8”

CTN/MSTR

50/200

Chrome Plated Compression x FIP Connector

• Lead Free

PART NO.

N66066LF

N66068LF

N66088LF

TUBE x FIP

3/8” x 3/8”

3/8” x 1/2”

1/2” x 1/2”

CTN/MSTR

200/800

100/400

125/250

Chrome Plated Compression x MIP Connector

• Lead Free

PART NO.

N68066LF

N68068LF

N68088LF

TUBE x MIP

3/8” x 3/8”

3/8” x 1/2”

1/2” x 1/2”

CTN/MSTR

125/500

100/400

100/400

Chrome Plated Compression x Sweat Adapter

• Lead Free

PART NO.

N66610LF

TUBE x OD

3/8” x 5/8”

(1/2” swt)

CTN/MSTR

100/200

Chrome Plated Compression x FIP Elbow

• Lead Free

PART NO.

N70066LF

N70068LF

N70086LF

TUBE x FIP

3/8” x 3/8”

3/8” x 1/2”

1/2” x 3/8”

CTN/MSTR

100/400

100/400

100/400

Chrome Plated Compression x MIP Elbow

• Lead Free

PART NO.

N69066LF

N69068LF

TUBE x MIP

3/8” x 3/8”

3/8” x 1/2”

CTN/MSTR

100/400

100/400

3’ Chrome Plated Brass Cover Tubes

• Plain ends

(no threads)

• 20 gauge

PART NO.

T73125

T73138

T73150

T73175

T73200

DESCRIPTION

1-1/4” OD x 3’ tube

1-3/8” OD x 3’ tube

1-1/2” OD x 3’ tube

1-3/4” OD x 3’ tube

2” OD x 3’ tube

CTN/MSTR

1/25

1/25

1/25

1/25

1/20

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Short Flare Nut

Style 41S

PART NO.

F40001

F40002

F40003

F40004

F40005

F40006

F40007

F40126

Long Flare Nut

Style 141L

PART NO.

F40008

F40131

F40132

F40133

Short Forged Flare Nut

Style 141S

PART NO.

F40009

F40010

F40011

F40012

F40013

F40014

F40119

Flare Plug

Style 39

Flare Cap

Style 40

PART NO.

F40015

F40016

F40017

F40018

PART NO.

F40019

F40098

F40020

F40021

F40022

TUBE SIZE

3/16”

1/4”

5/16”

3/8”

1/2”

5/8”

3/4”

7/8”

TUBE SIZE

3/8”

1/4”

1/2”

5/8”

TUBE SIZE

1/4”

3/8”

1/2”

5/8”

3/8”x 1/4”

1/2”x 3/8”

5/8”x 1/2”

TUBE SIZE

1/4”

3/8”

1/2”

5/8”

TUBE SIZE

1/4”

5/16”

3/8”

1/2”

5/8”

CTN/MSTR

10/3000

10/2000

5/1000

5/850

5/750

5/450

3/201

3/99

Flare Tee

Style 44

PART NO.

F40033

F40034

F40035

F40036

F40037

F40038

F40039

F40120

TUBE SIZE

1/4”

5/16”

3/8”

1/2”

5/8”

3/8”x 3/8”x 1/4”

1/2”x 1/2”x 3/8”

5/8”x 5/8”x 1/2”

CTN/MSTR

5/750

10/1000

5/400

5/300

Flare x MIP Branch Tee

Style 45

PART NO.

F40040

F40041

TUBE x MIP

3/8”x 1/4”

3/8”x 3/8”

CTN/MSTR

10/1500

5/800

5/600

5/400

5/800

5/450

5/300

Female Flare Swivel

Style 70

PART NO.

F40125

F40095

F40096

F40097

TUBE SIZE

1/4”

3/8”

1/2”

5/8”

CTN/MSTR

10/1200

5/600

5/500

5/250

Flare Union

Style 42

PART NO.

F40023

F40024

F40025

F40026

F40027

F40100

F40127

F40028

F40029

F40030

F40031

F40032

TUBE SIZE

1/4”

5/16”

3/8”

1/2”

5/8”

3/4”

7/8”

3/8”x 1/4”

1/2”x 1/4”

1/2”x 3/8”

5/8”x 3/8”

5/8”x 1/2”

CTN/MSTR

10/1000

5/500

5/1500

5/600

5/600

CTN/MSTR

10/500

5/500

5/400

5/250

5/100

5/300

5/150

5/150

CTN/MSTR

5/400

5/400

D

CTN/MSTR

10/400

10/350

5/200

5/150

CTN/MSTR

10/800

5/700

5/400

5/350

5/300

5/200

3/100

5/400

5/500

5/500

5/300

5/300

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 135

D

Flare x MIP Half Union

Style 48

F40068

F40069

F40070

F40071

F40072

F40073

F40074

F40075

F40109

F40076

F40077

F40110

F40112

F40122

PART NO.

F40063

F40064

F40107

F40108

F40065

F40066

F40067

TUBE x MIP

1/4”x 1/8”

1/4”x 1/4”

1/4”x 3/8”

1/4”x 1/2”

5/16”x 1/8”

5/16”x 1/4”

3/8”x 1/8”

3/8”x 1/4”

3/8”x 3/8”

3/8”x 1/2”

3/8”x 3/4”

1/2”x 1/4”

1/2”x 3/8”

1/2”x 1/2”

1/2” x 3/4”

5/8”x 3/8”

5/8”x 1/2”

5/8”x 3/4”

3/4”x 1/2”

3/4”x 3/4”

7/8”x 3/4”

Flare x FIP Coupling

Style 46

PART NO.

F40042

F40043

F40117

F40118

F40044

F40045

F40047

F40048

F40049

F40050

F40051

F40052

F40053

F40054

F40055

F40101

F40102

F40103

F40121

TUBE x FIP

1/4”x 1/8”

1/4”x 1/4”

1/4”x 3/8”

1/4”x 1/2”

5/16”x 1/8”

5/16”x 1/4”

3/8”x 1/4”

3/8”x 3/8”

3/8”x 1/2”

3/8” x 3/4”

1/2”x 1/4”

1/2”x 3/8”

1/2”x 1/2”

1/2”x 3/4”

5/8”x 1/2”

5/8”x 3/4”

3/4”x 1/2”

3/4”x 3/4”

7/8”x 3/4”

CTN/MSTR

10/200

10/1500

5/600

5/600

5/800

5/700

5/600

5/700

5/600

5/450

3/250

5/300

3/201

5/350

3/201

5/300

5/300

3/201

3/200

3/201

3/99

Flare Elbow

Style 55

PART NO.

F40078

F40079

F40080

F40081

Flare x FIP Elbow

Style 50

PART NO.

F40104

F40105

F40056

F40057

F40058

F40059

F40060

F40061

F40106

F40135

TUBE SIZE

1/4”

3/8”

1/2”

5/8”

TUBE x FIP

1/4”x 1/4”

1/4”x 3/8”

3/8”x 1/4”

3/8”x 3/8”

3/8”x 1/2”

1/2”x 3/8”

1/2”x 1/2”

5/8”x 1/2”

5/8”x 3/4”

1/2”x 3/4”

CTN/MSTR

10/1500

10/1000

5/700

5/500

5/1000

5/1000

5/800

5/500

5/500

3/300

5/500

5/500

5/400

3/300

5/300

3/250

3/99

3/99

3/99

Flare x MIP Elbow

Style 49

F40089

F40091

F40114

F40092

F40093

F40128

F40094

F40115

F40111

F40116

PART NO.

F40082

F40083

F40113

F40084

F40085

F40086

F40087

F40088

TUBE x MIP

1/4”x 1/8”

1/4”x 1/4”

1/4”x 3/8”

5/16”x 1/8”

5/16”x 1/4”

3/8”x 1/8”

3/8”x 1/4”

3/8”x 3/8”

3/8”x 1/2”

1/2”x 3/8”

1/2”x 1/4”

1/2”x 1/2”

1/2”x 3/4”

5/8”x 3/8”

5/8”x 1/2”

5/8”x 3/4”

3/4”x 1/2”

3/4”x 3/4”

CTN/MSTR

10/1000

10/500

10/550

5/150

CTN/MSTR

10/700

5/700

5/600

5/650

5/200

5/400

5/300

5/250

3/201

3/201

CTN/MSTR

10/800

10/1000

5/600

5/800

5/800

5/650

5/650

5/600

5/400

5/400

5/400

5/300

3/150

5/200

5/200

5/150

3/120

3/99

136 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Space Heater Fittings

Cap

• 9/16”-24 Fine threaded flare

PART NO.

F41003

OD

3/8”

Union

• 9/16”-24 Fine threaded flare

PART NO.

F41008

OD

3/8”

Female Coupling

• 9/16”-24 Fine threaded flare

PART NO.

F41004

F41005

OD x FIP

3/8”x 3/8”

3/8”x 1/2”

Male Half Union

• 9/16”-24 Fine threaded flare

PART NO.

F41006

F41007

OD x MIP

3/8”x 3/8”

3/8”x 1/2”

Tee

• 9/16”-24 Fine threaded flare

PART NO.

F41009

OD

3/8”

Male Elbow

• 9/16”-24 Fine threaded flare

PART NO.

F41012

F41013

OD x MIP

3/8” x 3/8”

3/8” x 1/2”

CTN/MSTR

10/750

CTN/MSTR

5/325

CTN/MSTR

1/1

1/1

Gas Range Fittings

Flare x Male

PART NO.

F481012

OD x MIP

5/8” (15/16-16)x 3/4”

Flare x Female

CTN/MSTR

1/1

PART NO.

F46108

OD x FIP

5/8”(15/16-16) x 1/2”

CTN/MSTR

1/1

Flare Cap & Nut

PART NO.

F401516

(cap)

F411516

(nut)

SIZE

15/16”

15/16”

CTN/MSTR

1/1

1/1

D

CTN/MSTR

1/1

1/1

CTN/MSTR

10/500

CTN/MSTR

10/100

10/100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 137

Yellow Brass 90° Elbow

PART NO.

P20002

P20004

P20006

P20008

IPT

1/8”

1/4”

3/8”

1/2”

CTN/MSTR

1/1

1/1

1/1

1/1

D

Yellow Brass 90° Male Elbow

PART NO.

P13986

IPT

1/2”

Yellow Brass 45° Elbow

PART NO.

P10452

P10454

IPT

1/8”

1/4”

CTN/MSTR

1/1

Yellow Brass 90° Street Elbow

PART NO.

P16002

P16004

P16006

P16008

IPT

1/8”

1/4”

3/8”

1/2”

CTN/MSTR

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

Yellow Brass 45° Street Elbow

PART NO.

P12402

P12404

P12408

Yellow Brass Tee

PART NO.

P10012

P10014

P10016

P10018

IPT

1/8”

1/4”

1/2”

IPT

1/8”

1/4”

3/8”

1/2”

CTN/MSTR

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

Yellow Brass Bell Reducer

PART NO.

P19062

P19082

P19084

P19086

P19128

IPT

3/8” x 1/8”

1/2” x 1/8”

1/2” x 1/4”

1/2” x 3/8”

3/4” x 1/2”

Yellow Brass Coupling

PART NO.

P10032

P10034

P10036

P10038

P10312

IPT

1/8”

1/4”

3/8”

1/2”

3/4”

Yellow Brass HEX Head Plug

PART NO.

P12102

P12104

P12106

P12108

P12112

IPT

1/8”

1/4”

3/8”

1/2”

3/4”

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

Yellow Brass Cap

PART NO.

P10082

P10084

P10086

P10088

P10812

IPT

1/8”

1/4”

3/8”

1/2”

3/4”

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

Yellow Brass Square Head Plug

PART NO.

P10092

P10094

P10096

P10098

P10912

IPT

1/8”

1/4”

3/8”

1/2”

3/4”

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

138 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Yellow Brass Countersunk Plug

PART NO.

P20092

P20094

P20096

P20098

IPT

1/8”

1/4”

3/8”

1/2”

CTN/MSTR

1/1

1/1

1/1

1/1

Yellow Brass Long Nipple

PART NO.

P13224

P13232

P13424

P13432

P13624

P13632

IPT

1/8” x 1-1/2”

1/8” x 2”

1/4” x 1-1/2”

1/4” x 2”

3/8” x 1-1/2”

3/8” x 2”

Yellow Brass Lock Nut

PART NO.

P11102

P11104

P11106

P11108

IPT

1/8”

1/4”

3/8”

1/2”

Yellow Brass HEX Bushing

PART NO.

P11042

P11062

P11064

P11082

P11084

P11086

P11122

P11124

P11126

P11128

IPT

1/4” x 1/8”

3/8” x 1/8”

3/8” x 1/4”

1/2” x 1/8”

1/2” x 1/4”

1/2” x 3/8”

3/4” x 1/8”

3/4” x 1/4”

3/4” x 3/8”

3/4” x 1/2”

Yellow Brass Face Bushing

PART NO.

P11986

P11928

IPT

1/2” x 3/8”

3/4” x 1/2”

CTN/MSTR

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

Yellow Brass HEX Nipple

PART NO.

P12202

P12204

P12206

P12208

P12212

P12342

P12362

P12364

P12386

P12328

IPT

1/8”

1/4”

3/8”

1/2”

3/4”

1/4” x 1/8”

3/8” x 1/8”

3/8” x 1/4”

1/2” x 3/8”

3/4” x 1/2”

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

D

Yellow Brass Close Nipple

PART NO.

P11202

P11204

P11206

P11208

IPT

1/8”

1/4”

3/8”

1/2”

CTN/MSTR

1/1

1/1

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 139

Brass PEX Coupling

• Lead Free

PART NO.

C76001LF

C76002LF

C76003LF

C76004LF

C76005LF

SIZE

1/2”

3/4”

1”

3/4” x 1/2”

1” x 3/4”

D

Brass PEX 90° Elbow

• Lead Free

PART NO.

C76008LF

C76009LF

C76010LF

SIZE

1/2”

3/4”

1”

Brass PEX x MIP 90° Elbow

• Lead Free

PART NO.

C76013LF

SIZE

1/2” x 1/2”

CTN/MSTR

100/1000

50/500

50/300

50/500

25/250

CTN/MSTR

100/500

50/250

25/100

CTN/MSTR

25/100

Brass PEX Equal Tee

• Lead Free

PART NO.

C76014LF

C76015LF

C76016LF

Brass PEX Tee

• Lead Free

PART NO.

C76017LF

C76018LF

C76019LF

C76020LF

C76021LF

C76022LF

C76023LF

SIZE

1/2”

3/4”

1”

SIZE

1/2” x 1/2” x 3/4”

3/4” x 1/2” x 1/2”

3/4” x 1/2” x 3/4”

3/4” x 3/4” x 1/2”

1” x 3/4” x 3/4”

1” x 1” x 1/2”

1” x 1” x 3/4”

CTN/MSTR

50/500

50/250

25/100

CTN/MSTR

50/250

50/250

25/250

25/250

25/100

25/100

25/100

Brass PEX x Female Sweat Adapter

• Lead Free

PART NO.

C76027LF

C76028LF

C76029LF

C76030LF

PEX x FSW

1/2” x 1/2”

3/4” x 3/4”

1/2” x 3/4”

1” x 1”

CTN/MSTR

100/500

50/250

25/250

25/200

Brass PEX x Male Adapter

• Lead Free

PART NO.

C76034LF

C76035LF

C76036LF

C76037LF

C76038LF

PEX x MIP

1/2” x 1/2”

1/2” x 3/4”

3/4” x 3/4”

1” x 1”

1” x 3/4”

Brass PEX x FIP Female Adapter

• Lead Free

PART NO.

C76041LF

C76042LF

C76043LF

C76044LF

PEX x FIP

1/2” x 1/2”

1/2” x 3/4”

3/4” x 3/4”

1” x 1”

CTN/MSTR

25/400

25/200

50/250

50/250

25/100

CTN/MSTR

50/250

50/200

25/200

25/250

Brass PEX x Male Sweat Adapter

• Lead Free

PART NO.

C76047LF

C76048LF

C76049LF

C76050LF

C76051LF

PEX x MALE

3/8” x 1/2”

1/2” x 1/2”

1/2” x 3/4”

3/4” x 3/4”

1” x 1”

CTN/MSTR

50/500

50/500

25/100

50/250

25/100

Brass PEX x FIP 90° Elbow with Swivel Plastic Nut

• Lead Free

PART NO.

C76060LF

PEX x FIP

1/2” x 1/2”

CTN/MSTR

50/200

Brass PEX Ball Valve

• Lead Free

PART NO.

B63050LF

B63075LF

B63100LF

Brass PEX Plug

• Lead Free

PART NO.

C76065LF

C76066LF

C76067LF

PEX x PEX

1/2”

3/4”

1”

PEX x FIP

1/2”

3/4”

1”

CTN/MSTR

10/100

10/100

6/48

CTN/MSTR

100/1000

100/500

25/250

140 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Brass PEX Crimp Ring

PART NO.

C76070

C76071

C76072

C76073

PEX x FIP

3/8”

1/2”

3/4”

1”

CTN/MSTR

100/2000

100/2000

100/1000

100/1000

Brass PEX x FIP Drop Ear 90° Elbow

• Lead Free

PART NO.

PEX x FIP EARS CTN/MSTR

C76080LF 1/2” x 1/2”

C76081LF 3/4” x 1/2”

C76079LF 1/2” x 1/2”

2

2

3

25/200

25/200

25/200

Oetiker PEX Stainless Steel Clamp

• The original patented PEX assembly clamp designated by ASTM F 2098

• Ingenious stepless design provides uniform compression for a 360° watertight seal

• Available for 3/8”, 1/2”, 3/4” and 1” ASTM F 876/877 pex tubing sizes

• Specified for use with ASTM F 1807 and F 2159 insert fittings TECHNICAL DATA

APPLICATION:

PLUMBING &

HOT AND

HYDRONIC

COLD WATER

MAXIMUM OPERATING

TEMPERATURE: 180°F

MAXIMUM OPERATING

PRESSURE (PSI): 100

MATERIAL: STAINLESS

STEEL UNS S304000

PART NO.

C76074

C76075

C76076

C76077

SIZE

3/8”

1/2”

3/4”

1”

CTN/MSTR

100/2000

100/2000

50/2000

50/1000

Black Plastic PEX Elbow

• Listed by Warnock Hersey

• Meets ASTM F2159, F877 and CSA B137.5

• Will not rust or corrode

• Unaffected by household cleaners and chemicals

• Smooth interior for better water flow

• Resists scale build-up

• Lead free

WHITE PEX BLACK PEX

C76702

C76703

C76720

C76751

C76752

C76753

SIZE

1/2”

3/4”

1”

CTN/MSTR

50/500

50/350

50/150

Plastic PEX Equal Tee

• Listed by Warnock Hersey

• Meets ASTM F2159, F877 and CSA B137.5

• Will not rust or corrode

• Unaffected by household cleaners and chemicals

• Smooth interior for better water flow

• Resists scale build-up

• Lead free

WHITE PEX BLACK PEX

C76700

C76701

——

C76762

C76763

C76773

SIZE

1/2”

3/4”

1”

CTN/MSTR

50/400

50/200

50/200

Black Plastic PEX Reducing Tee

• Listed by Warnock Hersey

• Meets ASTM F2159, F877 and CSA B137.5

• Will not rust or corrode

• Unaffected by household cleaners and chemicals

• Smooth interior for better water flow

• Resists scale build-up

• Lead free

WHITE PEX BLACK PEX

C76709

C76710

C76764

C76765

C76711

C76712

——

——

C76766

C76767

C76774

C76772

——

——

——

C76776

C76770

C76775

SIZE

1/2” x 1/2” x 3/4”

3/4” x 1/2” x 1/2”

3/4” x 1/2” x 3/4”

3/4” x 3/4” x 1/2”

3/4” x 3/4” x 1”

1” x 3/4” x 3/4”

1” x 3/4” x 1”

1” x 1” x 1/2”

1” x 1” x 3/4”

CTN/MSTR

25/300

25/300

25/300

25/300

25/300

25/300

25/300

25/300

25/300 D

Black Plastic PEX Coupling

• Listed by Warnock Hersey

• Meets ASTM F2159, F877 and CSA B137.5

• Will not rust or corrode

• Unaffected by household cleaners and chemicals

• Smooth interior for better water flow

• Resists scale build-up

• Lead free

WHITE PEX BLACK PEX

C76704 C76754

C76705

C76706

C76755

C76756

C76722

C76723

C76757

C76758

SIZE

1/2”

3/4”

3/4” x 1/2”

1”

1” x 3/4”

CTN/MSTR

50/1000

50/600

50/600

50/200

50/300

Black Plastic PEX Adapter

• Listed by Warnock Hersey

• Meets ASTM F2159, F877 and CSA B137.5

• Will not rust or corrode

• Unaffected by household cleaners and chemicals

• Smooth interior for better water flow

• Resists scale build-up

• Lead free

WHITE PEX BLACK PEX

C76707 C76759

C76708 C76760

C76727 C76761

PEX x MPT

1/2” x 1/2”

3/4” x 3/4”

1” x 1”

CTN/MSTR

25/500

25/300

25/150

Black Plastic PEX Plug

• Listed by Warnock Hersey

• Meets ASTM F2159, F877 and CSA B137.5

• Will not rust or corrode

• Unaffected by household cleaners and chemicals

• Smooth interior for better water flow

• Resists scale build-up

• Lead free

WHITE PEX BLACK PEX

C76740

C76741

——

C76768

C76769

C76771

SIZE

1/2”

3/4”

1”

CTN/MSTR

100/2000

100/1000

100/1000

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 141

D

PlumBite ® Push On Fittings

• Joins copper, CPVC, PE-RT or PEX tubing

• No soldering, glue, heat or external tools required

• Max. Temp 180°F

• Max. Pressure 200 PSI

• Generous warranty

• NSF/ANSI 61, NSF 372, NSF 14, ASSE 1061, UPC and cUPC, and IAPMO Certified

• Lead free

Coupling (Bulk)

SIZE

1/2”

3/4”

CTN/MSTR

5/100

5/100

PART NO.

C76500LF

C76501LF

Coupling (Bagged)

PART NO.

C77400LF

C77401LF

C77402LF

C77403LF

C77404LF

C77405LF

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

6/60

6/24

4/24

10/40

3/18

2/12

142

Adapter (Bulk)

PART NO.

C76505LF

C76506LF

Adapter (Bagged)

SIZE

1/2” x 1/2” MPT

3/4” x 3/4” MPT

PART NO.

C77417LF

C77418LF

C77419LF

SIZE

1/2” x 1/2” MPT

3/4” x 3/4” MPT

1” x 1” MPT

Male Adapter (Bagged)

PART NO.

C77420LF

C77421LF

SIZE

1/2” x 3/4” MPT

3/8” x 1/2” MPT

CTN/MSTR

10/200

5/100

CTN/MSTR

6/60

6/24

4/24

CTN/MSTR

4/24

4/24

Female Adapter (Bagged)

PART NO.

C77422LF

C77423LF

SIZE

1/2” x 3/4” FPT

3/8” x 1/2” FPT

90° Elbow (Bulk)

PART NO.

C76507LF

C76508LF

90° Elbow (Bagged)

PART NO.

C77425LF

C77426LF

C77427LF

C77428LF

C77429LF

C77430LF

SIZE

1/2”

3/4”

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

4/24

4/24 Reducer Coupling (Bulk)

PART NO.

C76502LF

SIZE

3/4” x 1/2”

Reducer Coupling (Bagged)

PART NO.

C77406LF

C77407LF

C77408LF

C77409LF

C77410LF

SIZE

3/4” x 1/2”

1” x 3/4”

1/2” x 3/8”

1-1/4” x 1”

1/2” x 1/4”

Transition Coupling (Bagged)

PART NO.

C77411LF

C77412LF

SIZE

3/4” Polybutylene

3/4” PVC

CTN/MSTR

15/60

CTN/MSTR

6/24

4/24

4/24

10/50

4/24

CTN/MSTR

4/24

4/24

CTN/MSTR

10/150

5/80

CTN/MSTR

6/60

4/24

4/24

5/25

5/20

3/12

Repair Coupling (Bulk)

PART NO.

C76530LF

C76531LF

C76532LF

SIZE

1/2”

3/4”

1”

Repair Coupling with Removal Tool (Bagged)

CTN/MSTR

5/70

5/70

5/40

PART NO.

C77470LF

C77471LF

C77472LF

SIZE

1/2”

3/4”

1”

CTN/MSTR

3/24

3/24

4/24

Elbow C x F (Bagged)

PART NO.

C77431LF

SIZE

1/2” x 1/2” FPT

Elbow C x M (Bagged)

PART NO.

C77432LF

SIZE

1/2” x 1/2” MPT

CTN/MSTR

4/24

CTN/MSTR

4/24

Adapter C x F (Bulk)

PART NO.

C76503LF

C76504LF

C76553LF

Adapter C x F (Bagged)

SIZE

1/2” x 1/2” FPT

3/4” x 3/4”FPT

1”x1” FPT

PART NO.

C77413LF

C77514LF

C77416LF

SIZE

1/2” x 1/2” FPT

3/4” x 3/4”FPT

1”x1” FPT

CTN/MSTR

10/100

20/60

5/100

CTN/MSTR

6/60

4/24

4/24

Drop Ear 90° Elbow F x F (Bagged)

PART NO.

C77434LF

SIZE

1/2”

Drop Ear 90° Elbow C x F (Bulk)

PART NO.

C76509LF

SIZE

1/2”

CTN/MSTR

6/24

CTN/MSTR

10/100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

PlumBite ® Section Header

Tee (Bulk)

PART NO.

C76510LF

C76512LF

C76513LF

C76514LF

C76511LF

Tee (Bagged)

PART NO.

C77440LF

C77444LF

C77447LF

C77443LF

C77441LF

C77442LF

C77445LF

C77446LF

Cap (Bulk)

PART NO.

C76515LF

C76516LF

Cap (Bagged)

PART NO.

C77450LF

C77451LF

C77452LF

C77453LF

C77454LF

C77455LF

SIZE

1/2”

3/4” x 3/4” x 1/2”

3/4” x 1/2” x 3/4”

3/4” x 1/2” x 1/2”

3/4”

SIZE

1/2”

3/4” x 3/4” x 1/2”

3/4” x 1/2” x 3/4”

3/4” x 1/2” x 1/2”

3/4”

1”

3/4” x 3/4” x 1/4”

3/4” x 3/4” x 1”

SIZE

1/2”

3/4”

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

10/100

5/50

5/50

5/50

10/100

CTN/MSTR

6/24

4/24

4/24

4/24

4/24

3/24

10/60

3/24

CTN/MSTR

10/200

5/150

CTN/MSTR

6/60

4/24

4/24

10/60

10/40

5/25

Supply Stop (Bulk)

PART NO.

SIZE

C76570LF Straight 1/2” x 3/8”OD

C76571LF Angle 1/2” x 3/8”OD

Supply Stop (Bagged)

CTN/MSTR

1/120

1/120

PART NO.

SIZE

C77475LF Straight 1/2” x 3/8”OD Comp

C77476LF Straight 1/2” x 1/4”OD Comp

C77473LF Angle 1/2” x 3/8”OD Comp

C77474LF Angle 1/2” x 1/4”OD Comp

CTN/MSTR

6/48

4/48

6/48

4/48

Water Heater Connector

PART NO.

C76605LF

C76606LF

C76607LF

C76608LF

C76612LF

C76613LF

C77478LF

C76614LF

PF x FIP x LENGTH CTN/MSTR

1/2” x 3/4” FIP x 12” 10/80

1/2” x 3/4” FIP x 15”

1/2” x 3/4” FIP x 18”

1/2” x 3/4” FIP x 24”

3/4” x 3/4” FIP x 12”

3/4” x 3/4” FIP x 15”

3/4” x 3/4” FIP x 18”

3/4” x 3/4” FIP x 18”

C77479LF

C76615LF

3/4” x 3/4” FIP x 24”

3/4” x 3/4” FIP x 24”

C76616LF 1/2” valve x 3/4” FIP x 18”

C76617LF 3/4” valve x 3/4” FIP x 18”

10/80

10/80

10/80

10/80

10/80

6/36

10/80

8/48

10/80

1/10

1/10

Water Heater Connector with Ball Valve

Ball Valve (Bulk)

PART NO.

C76561LF

C76562LF

Ball Valve (Bagged)

PART NO.

C77460LF

C77461LF

C77462LF

C77463LF

C77464LF

C77465LF

Check Valve (Bagged)

PART NO.

C77466LF

C77467LF

SIZE

1/2”

3/4”

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

SIZE

1/2”

3/4”

CTN/MSTR

10/60

10/40

CTN/MSTR

10/100

10/100

5/50

10/100

10/100

5/50

CTN/MSTR

20/120

10/60

• Lead Free

PART NO.

C77477LF

SIZE

3/4” x 3/4” FIP x 18”

Removal Tool Kit (Bagged)

• Lead Free

PART NO.

C77488LF

SIZE

1/4” Through 1”

Removal Tool (Bulk)

PART NO.

C76520

C76521

C76522

Removal Tool (Bagged)

PART NO.

C77482LF

C77483LF

C77480LF

C77481LF

C77484LF

SIZE

1/2”

3/4”

1”

SIZE

1/2”

3/4”

1/4”

3/8”

1”

Thermostatic Mixing Valve (Bagged)

PART NO.

C77468LF

C77469LF

SIZE

1/2”

3/4”

CTN/MSTR

1/24

1/24

Large Removal Tool

PART NO.

C77485LF

C77486LF

C77487LF

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

SIZE

1-1/4”

1-1/2”

2”

CTN/MSTR

5/30

CTN/MSTR

6/24

CTN QTY

1/500

5/250

5/200

CTN QTY

100/600

60/360

100/600

100/600

40/240

CTN/MSTR

10/100

20/60

5/100

D

143

Twist To Lock Plastic Fittings

• Reduced installation time

• Ideal for service and repair

• “O-ring” design for leak-free seals

• Working temps and pressure:

180PSI@68°F, 100PSI@150°F, 45PSI@180°F

INSTRUCTIONS FOR USE

To Connect: Squarely cut tubing or pipe to desired length, removing all burrs. Push fitting onto the end of tube or pipe. Fitting will grip before it seals. Ensure that tubing or pipe is pushed into the fitting until the end is fully seated into the internal tube stop.

Swivel Elbow Union CTS x FIP

PART NO.

C76812

Swivel Union Connector CTS x BC

PART NO.

C76813

SIZE

1/2” x 1/2”

SIZE

1/2” x BC

CTN/MSTR

3/160

CTN/MSTR

3/300

To Lock Fitting: Twist the screw cap until colored line is no longer visible.

Plastic inserts are required for plastic pipe connections in heating installations. It is recommended to use pipe inserts for plastic pipe connections in standard residential plumbing (hot and cold water) installations.

Drop Ear Elbow CTS

PART NO.

C76800

SIZE

1/2”

CTN/MSTR

3/144

Tube End Stop CTS

PART NO.

C76814

C76815

C76816

Tube Elbow Union CTS x CTS Stem

SIZE

1/2”

3/4”

1”

PART NO.

C76817

C76818

Elbow Union CTS x CTS

SIZE

1/2” x 1/2”

3/4” x 3/4”

PART NO.

C76819

C76820

C76821

Tube Tee Union Connector CTS x CTS x CTS Stem

SIZE

1/2”

3/4”

1”

PART NO.

C76822

SIZE

1/2” x 1/2” x 1/2”

CTN/MSTR

3/336

3/640

3/135

CTN/MSTR

3/345

3/180

CTN/MSTR

3/480

3/60

3/138

CTN/MSTR

3/180

Enlarger Connector CTS STACK x CTS

PART NO.

C76801

Female Adapter CTS x FIP

PART NO.

C76802

C76803

C76804

C76805

Female Garden Hose Adapter CTS x FGH

PART NO.

C76806

Male Adapter CTS x MIP

PART NO.

C76807

C76808

C76809

Male Elbow CTS x MIP

PART NO.

C76810

SIZE

3/4” x 1”

SIZE

1/2” x 1/2”

1/2” x 3/4”

3/4” x 3/4”

1” x 1”

SIZE

1/2” x 3/4”

SIZE

1/2” x 1/2”

1/2” x 3/4”

3/4” x 3/4”

SIZE

1/2” x 1/2”

CTN/MSTR

3/120

CTN/MSTR

3/321

3/480

3/216

3/36

CTN/MSTR

3/168

CTN/MSTR

3/330

3/282

3/192

CTN/MSTR

3/168

Stack Tube Tee Union CTS

PART NO.

C76823

C76824

Union Connector CTS x CTS

PART NO.

C76825

C76826

C76827

C76828

C76829

C76830

C76831

Tee Union CTS x CTS x CTS

SIZE

1/2”

3/4”

SIZE

3/8”

1/2” x 5/8”

1/2”

3/4” x 1/2”

3/4”

1” x 3/4”

1”

PART NO.

C76832

C76833

C76834

C76835

C76836

C76837

Hand Valve Union Connector CTS x CTS

PART NO.

C76838

C76839

SIZE

1/2”

3/4” x 3/4” x 1/2”

3/4”

1”

1” x 3/4” x 3/4”

3/4” x 1/2” x 1/2”

SIZE

1/2”

3/4”

CTN/MSTR

3/195

3/102

CTN/MSTR

3/351

3/528

3/480

3/330

3/288

3/180

3/165

CTN/MSTR

3/150

3/180

3/90

3/78

3/81

3/180

CTN/MSTR

3/210

3/120

Reducing Connector CTS x CTS Stem

PART NO.

C76811

SIZE

1/2” x 3/4”

CTN/MSTR

3/300

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

D

D

Plastic Push On Fittings

• Quick and easy installation

• Very durable and fatigue resistant

• Manufactured from safe, non-toxic materials meeting the

requirements of the US FDA, WRAS, ANSI/NSF-51, 61 and SK Zert

• All connections can be assembled and disassembled repeatedly

1. Cut the part of the tube to be inserted into the fitting to plane the end.

2.Make sure to use a clean tube without any foreign material or cracks.

6. When no play is desired for the fitting and tube, use our company’s LC to eliminate the play of the fitting.

3. When inserting the tube, remove any obstructions before fully inserting the tube.

Make sure the tube is fully inserted.

4.Inserting the tube into the fitting only takes moderate force. The tube or fitting should not be scratched of damaged in the process, as this is the main cause for water leaks later on.

5. To make sure that the fitting is properly connected to the tube, pull it once. After pulling, insert a spanner under the collet and push the tube into the fitting once more for a complete insertion.

Straight Needle Valve Tube OD x MIP

PART NO.

C76840

C76841

Straight Needle Valve Tube OD

PART NO.

C76842

C76843

Angle Valve Tube OD x FIP

PART NO.

C76844

C76845

Straight Valve Tube OD x MIP

PART NO.

C76846

C76847

Straight Valve Tube OD x Tube OD

PART NO.

C76848

C76849

End Cap Tube OD

PART NO.

C76850

C76851

C76852

Plug Tube OD

PART NO.

C76853

C76854

C76855

7. Make sure to completely eliminate pressure before disassembling the fitting.

8. When disassembling the tube, push the clip in direction to the main assembly and then pull the tube out for easy disassembling.

9. Fittings and tubes can be reused.

SIZE

1/4” x 1/4”

3/8” x 3/8”

SIZE

1/4”

3/8”

SIZE

1/4” x 1/4”

3/8” x 3/8”

SIZE

1/4” x 1/4”

3/8” x 3/8”

SIZE

1/4”

3/8”

SIZE

1/4”

3/8”

1/2”

SIZE

1/4”

3/8”

1/2”

CTN/MSTR

400/1600

100/400

CTN/MSTR

100/400

150/600

CTN/MSTR

300/1200

100/400

CTN/MSTR

50/600

100/400

CTN/MSTR

150/600

100/400

CTN/MSTR

500/3600

600/2400

400/1600

CTN/MSTR

600/2400

1000/4000

500/2000

Union & Reducing Union Tube OD x Tube OD

PART NO.

C76856

C76857

C76858

C76859

Bulkhead Union Tube OD x Tube OD

PART NO.

C76863

C76864

C76865

C76866

C76867

Elbow Tube OD x Tube OD

SIZE

1/4”

3/8” x 1/4”

3/8” x 3/8”

1/2” x 3/8”

PART NO.

C76860

C76861

C76862

SIZE

1/4” x 1/4”

3/8” x 3/8”

1/2” x 3/8”

Tee & Reducing Tee Tube OD x Tube OD x Tube OD

SIZE

1/4”

3/8” x 3/8” x 1/4”

3/8”

1/2” x 1/2” x 3/8”

1/2”

PART NO.

C76868

C76869

C76870

Coupling Tube OD x FIP

SIZE

1/4”

3/8”

1/2”

PART NO.

C76871

C76872

C76873

Kitchen Faucet Adapter Tee FIP x MIP x Tube OD

SIZE

1/4” x 1/8”

1/4” x 1/4”

3/8” x 1/4”

PART NO.

C76874

C76875

Connector Tube OD x MIP

PART NO.

C76876

C76877

C76878

C76879

C76880

C76881

C76882

C76883

Elbow Tube OD x MIP

PART NO.

C76884

C76885

C76886

C76887

C76888

Elbow Adapter Tube OD x Tube OD Stem

PART NO.

C76889

C76890

Connector Tube OD Stem x Tube ID

PART NO.

C76891

C76892

C76893

SIZE

1/2” x 1/2” x 1/4”

1/2” x 1/2” x 3/8”

SIZE

1/4” x 1/8”

1/4” x 1/4”

1/4” x 3/8”

3/8” x 1/4”

3/8” x 3/8”

3/8” x 1/2”

1/2” x 3/8”

1/2” x 1/2”

SIZE

1/4” x 1/8”

1/4” x 1/4”

1/4” x 3/8”

3/8” x 1/4”

3/8” x 3/8”

SIZE

1/4” x 1/4”

3/8” x 3/8”

SIZE

3/8” x 3/8”

3/8” x 1/2”

1/2” x 1/2”

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

800/3200

600/2400

500/2000

800/3200

300/1200

CTN/MSTR

500/2000

200/800

CTN/MSTR

800/3200

200/800

400/1600

CTN/MSTR

100/400

100/400

CTN/MSTR

800/3200

800/3200

600/2400

400/1600

400/1600

200/800

300/1200

200/800

CTN/MSTR

700/2800

250/1000

250/1000

200/800

CTN/MSTR

200/800

200/800

100/400

CTN/MSTR

400/1600

200/800

150/600

100/400

100/400

D

CTN/MSTR

700/2800

300/1200

150/600

CTN/MSTR

400/1600

600/2400

300/1200

145

D

N22005

N22006

N22007

N22008

N22009

N22010

N22014

N22018

N21007

N21008

N21009

N21010

N21014

N21022

N22000

N22001

N22002

N22003

N22004

N22022

N23000

N23001

N23002

N23003

N23004

N23005

N23006

N23007

N23008

N20009

N20010

N20012

N20014

N21000

N21001

N21002

N21003

N21004

N21005

N21006

PART NO.

N20000

N20001

N20002

N20003

N20004

N20005

N20006

N20007

N20008

Red Brass Pipe Nipples

• Meets ASTM B687

• Lead free

1/4” x 8”

1/4” x 12”

3/8” x close

3/8” x 1-1/2”

3/8” x 2”

3/8” x 2-1/2”

3/8” x 3”

3/8” x 3-1/2”

3/8” x 4”

3/8” x 4-1/2”

3/8” x 5”

1/4” x close

1/4” x 1-1/2”

1/4” x 2”

1/4” x 2-1/2”

1/4” x 3”

1/4” x 3-1/2”

1/4” x 4”

1/4” x 4-1/2”

1/4” x 5”

1/4” x 5-1/2”

1/4” x 6”

IPT

1/8” x close

1/8” x 1-1/2”

1/8” x 2”

1/8” x 2-1/2”

1/8” x 3”

1/8” x 3-1/2”

1/8” x 4”

1/8” x 4-1/2”

1/8” x 5”

1/8” x 5-1/2”

1/8” x 6”

1/8” x 7”

1/8” x 8”

3/8” x 5-1/2”

3/8” x 6”

3/8” x 8”

3/8” x 10”

3/8” x 12”

1/2” x close

1/2” x 1-1/2”

1/2” x 2”

1/2” x 2-1/2”

1/2” x 3”

1/2” x 3-1/2”

1/2” x 4”

1/2” x 4-1/2”

1/2” x 5”

1/150

1/100

100/400

100/400

80/320

80/320

50/200

40/320

40/320

35/280

30/120

150/600

100/800

100/800

100/800

50/400

50/400

50/200

50/200

40/320

40/320

40/320

30/120

30/120

1/160

1/120

1/110

75/600

60/480

50/200

35/280

35/280

25/100

25/100

25/100

25/100

CTN/MSTR

200/800

200/800

200/800

200/800

200/800

100/400

100/400

100/400

100/400

100/400

100/400

1/400

1/400

146

Red Brass Pipe Nipples cont…

N25006

N25007

N25008

N25009

N25010

N25012

N25014

N25016

N25018

N25022

N27000

N27002

N27003

N27004

N27005

N27006

N27007

N27008

N27009

N27010

N27014

N27016

N24010

N24012

N24014

N24016

N24018

N24022

N25000

N25002

N25003

N25004

N25005

N23022

N24000

N24001

N24002

N24003

N24004

N24005

N24006

N24007

N24008

N24009

PART NO.

N23009

N23010

N23012

N23014

N23016

N23018

N23020

3/4” x 8”

3/4” x 9”

3/4” x 10”

3/4” x 12”

1” x close

1” x 2”

1” x 2-1/2”

1” x 3”

1” x 3-1/2”

1” x 4”

1” x 4-1/2”

1” x 5”

1” x 5-1/2”

1” x 6”

1” x 7”

1” x 8”

1” x 9”

1” x 10”

1” x 12”

1-1/4” x close

1-1/4” x 2”

1-1/4” x 2-1/2”

1-1/4” x 3”

1-1/4” x 3-1/2”

1-1/4” x 4”

IPT

1/2” x 5-1/2”

1/2” x 6”

1/2” x 7”

1/2” x 8”

1/2” x 9”

1/2” x 10”

1/2” x 11”

1/2” x 12”

3/4” x close

3/4” x 1-1/2”

3/4” x 2”

3/4” x 2-1/2”

3/4” x 3”

3/4” x 3-1/2”

3/4” x 4”

3/4” x 4-1/2”

3/4” x 5”

3/4” x 5-1/2”

3/4” x 6”

3/4” x 7”

1-1/4” x 4-1/2”

1-1/4” x 5”

1-1/4” x 5-1/2”

1-1/4” x 6”

1-1/4” x 8”

1-1/4” x 9”

20/80

10/40

10/40

1/40

1/40

1/30

1/30

1/30

1/65

1/45

1/45

1/45

25/200

25/200

40/160

40/160

25/100

25/100

25/100

25/100

25/100

10/80

10/80

1/40

10/40

30/240

30/240

25/200

25/100

35/140

35/140

30/120

30/120

25/100

25/100

1/65

CTN/MSTR

25/100

25/100

1/100

1/100

1/100

1/100

1/100

1/100

40/320

10/40

10/40

10/40

10/40

1/25

1/20

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Red Brass Pipe Nipples cont…

N29016

N29018

N29020

N29022

N30000

N30004

N30005

N30006

N30007

N30008

N30010

N29000

N29003

N29004

N29005

N29006

N29007

N29008

N29009

N29010

N29012

N29014

PART NO.

N27018

N27022

N28000

N28002

N28003

N28004

N28005

N28006

N28007

N28008

N28009

N28010

N28014

N28016

N28018

N28022

N31000

N31004

N31005

N31006

N31008

N31010

10/40

10/40

10/40

10/40

1/25

1/25

1/25

1/10

1/10

1/10

1/10

15/60

15/60

10/40

10/40

10/40

1/20

1/15

1/15

1/15

15/60

10/40

CTN/MSTR

1/20

1/20

25/100

20/80

15/60

15/60

15/60

1/10

1/10

1/40

1/40

1/20

1/20

1/20

1/20

1/20

1/20

1/20

1/10

1/10

1/10

1/10

IPT

1-1/4” x 10”

1-1/4” x 12”

1-1/2” x close

1-1/2” x 2”

1-1/2” x 2-1/2”

1-1/2” x 3”

1-1/2” x 3-1/2”

2” x 3”

2” x 3-1/2”

2” x 4”

2” x 4-1/2”

2” x 5”

2” x 5-1/2”

2” x 6”

2” x 7”

2” x 8”

2” x 9”

2” x 10”

1-1/2” x 4”

1-1/2” x 4-1/2”

1-1/2” x 5”

1-1/2” x 5-1/2”

1-1/2” x 6”

1-1/2” x 8”

1-1/2” x 9”

1-1/2” x 10”

1-1/2” x 12”

2” x close

2” x 2-1/2”

2” x 11”

2” x 12”

2-1/2” x close

2-1/2” x 3”

2-1/2” x 3-1/2”

2-1/2” x 4”

2-1/2” x 4-1/2”

2-1/2” x 5”

2-1/2” x 6”

3” x close

3” x 3”

3” x 3-1/2”

3” x 4”

3” x 5”

3” x 6”

D

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 147

Bronze Pipe Fittings

Bronze 90° Elbow

• Lead Free

SPECIFICATIONS:

ANSI B16.15

ANSI B2.1 (PIPE THREADS)

FED WW-P-460

FED WW-U-516

150 PSI @400°F WSP

225 PSI WOG@ -20°F / 150°F

PART NO.

B74001LF

B74002LF

B74003LF

B74004LF

B74005LF

B74006LF

B74007LF

B74008LF

B74009LF

B74343LF

B74344LF

B74345LF

B74347LF

D

Bronze 90° Street Elbow

• Lead Free

SIZE

1/8”

1/4”

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

3/4” x 1/2”

1” x 1/2”

1” x 3/4”

1-1/2” x 1-1/4”

PART NO.

B74021LF

B74022LF

B74023LF

B74024LF

B74025LF

B74026LF

B74027LF

B74028LF

B74029LF

SIZE

1/8”

1/4”

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

Bronze 45° Elbow

• Lead Free

PART NO.

B74042LF

B74044LF

B74045LF

B74046LF

SIZE

1/4”

1/2”

3/4”

1”

Bronze 45° Street Elbow

• Lead Free

PART NO.

B74066LF

B74067LF

SIZE

1”

1-1/4”

CTN/MSTR

200/800

100/400

60/240

50/200

25/100

1/50

1/40

1/35

1/20

CTN/MSTR

120/480

50/200

25/100

1/90

CTN/MSTR

1/80

1/50

CTN/MSTR

150/600

100/400

75/300

50/200

25/100

1/80

1/50

1/35

1/20

30/120

25/100

25/100

1/40

Bronze Union

Bronze Tee

Bronze Cap

• Lead Free

PART NO.

B74181LF

B74182LF

B74183LF

B74184LF

B74185LF

B74186LF

B74187LF

B74188LF

B74189LF

Bronze Locknut

PART NO.

B74380LF

B74381

B74382

B74384

• Lead Free

PART NO.

B74081LF

B74082LF

B74083LF

B74084LF

B74085LF

B74086LF

B74087LF

B74088LF

B74089LF

B74090LF

B74354LF

B74396LF

B74358LF

B74359LF

B74365LF

B74369LF

B74367LF

B74368LF

• Lead Free

PART NO.

B74262LF

B74263LF

B74264LF

B74265LF

B74266LF

B74267LF

B74268LF

B74269LF

SIZE

1/8”

1/4”

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

SIZE

1/4”

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

SIZE

1/2”

3/4”

1”

1-1/2”

CTN/MSTR

60/240

30/120

25/100

20/80

1/50

1/35

1/25

1/18

SIZE

1/8”

1/4”

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

1/2”x 3/8”

3/4”x 3/8”

3/4”x 1/2”x 3/4”

3/4”x 1/2”

1” x 3/4”

1-1/4” x 3/4”

1-1/2” x 1-1/4”

2” x 1-1/2”

CTN/MSTR

120/480

75/300

50/200

25/100

1/85

1/35

1/35

1/24

1/15

1/8

35/140

25/100

1/100

25/100

1/70

1/35

1/25

1/15

CTN/MSTR

1/1200

200/800

150/600

100/400

50/200

40/160

1/100

1/100

1/70

CTN/MSTR

150/600

90/360

60/240

30/120

148 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Bronze Pipe Fittings

Bronze Coupling/Reducer

• Lead Free

PART NO.

B74121LF

B74122LF

B74123LF

B74124LF

B74125LF

B74126LF

B74127LF

B74128LF

B74129LF

B74132LF

B74140LF

B74142LF

B74144LF

B74145LF

B74148LF

B74150LF

B74152LF

B74153LF

B74154LF

B74155LF

B74156LF

B74157LF

B74160LF

B74161LF

Bronze Extension Piece

• Lead Free

PART NO.

B74370LF

• Lead Free

PART NO.

B74284LF

B74285LF

B74286LF

B74287LF

B74288LF

B74289LF

4”

1/4” x 1/8”

3/8” x 1/4”

1/2” x 1/4”

1/2” x 3/8”

3/4” x 1/2”

1” x 3/4”

1-1/4” x 3/4”

1-1/4” x 1”

SIZE

1/8”

1/4”

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

1-1/2” x 1/2”

1-1/2” x 3/4”

1-1/2” x 1”

1-1/2” x 1-1/4”

2” x 1-1/4”

2” x 1-1/2”

SIZE

3/4”

Bronze Cored Square Head Plug

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

200/800

150/600

100/400

50/200

5/100

1/100

1/175

1/50

1/30

1/6

150/600

90/360

75/300

70/280

45/180

25/100

1/90

1/80

1/75

1/80

1/65

1/60

1/40

1/35

CTN/MSTR

40/160

CTN/MSTR

150/600

100/400

50/200

35/140

30/120

1/75

Bronze Countersunk Plug

• Lead Free

Bronze Cross

PART NO.

B74331LF

• Lead Free

PART NO.

B74104LF

B74105LF

B74107LF

B74108LF

Bronze HEX Bushing

• Lead Free

B74218LF

B74220LF

B74222LF

B74223LF

B74224LF

B74228LF

B74229LF

B74230LF

B74231LF

B74232LF

B74235LF

PART NO.

B74200LF

B74201LF

B74202LF

B74203LF

B74204LF

B74205LF

B74206LF

B74207LF

B74208LF

B74209LF

B74210LF

B74212LF

B74213LF

B74216LF

B74217LF

Bronze Solid Square Head Plug

• Lead Free

PART NO.

B74301LF

B74302LF

B74303LF

B74304LF

B74305LF

B74306LF

SIZE

1/8”

1/4”

3/8”

1/2”

3/4”

1”

CTN/MSTR

300/1200

1/690

1/310

100/400

50/200

35/140

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

SIZE

3”

SIZE

1/2”

3/4”

1-1/4”

1-1/2”

SIZE

1/4” x 1/8”

3/8” x 1/8”

3/8” x 1/4”

1/2” x 1/8”

1/2” x 1/4”

1/2” x 3/8”

3/4” x 1/8”

3/4” x 1/4”

3/4” x 3/8”

3/4” x 1/2”

1” x 1/4”

1” x 1/2”

1” x 3/4”

1-1/4” x 1/2”

1-1/4” x 3/4”

1-1/4” x 1”

1-1/2” x 3/8”

1-1/2” x 3/4”

1-1/2” x 1”

1-1/2” x 1-1/4”

2” x 3/4”

2” x 1”

2” x 1-1/4”

2” x 1-1/2”

2-1/2” x 2”

4” x 3”

CTN/MSTR

1/32

CTN/MSTR

25/100

1/60

1/24

1/22

1/120

1/120

1/85

1/115

1/120

1/60

1/60

1/65

1/65

1/40

1/12

CTN/MSTR

300/1200

250/1000

125/500

150/600

150/600

1/1000

75/300

80/320

85/340

90/360

50/200

50/200

50/200

1/120

1/120

D

149

Chrome Plated Pipe Nipples & Fittings

D

Chrome Plated Nipples/Pipe Lengths

• Lead Free

N16600

N16900

N16918

N16924

N16936

N17100

N17150

N17300

N17400

N17600

N18100

N15900

N16100

N16150

N16200

N16250

N16300

N16350

N16400

N16450

N16500

N16550

PART NO.

N15100

N15150

N15200

N15250

N15300

N15350

N15400

N15450

N15500

N15550

N15600

N18200

N18250

N18300

N18400

N18500

N18600

1/2” x 2-1/2”

1/2” x 3”

1/2” x 3-1/2”

1/2” x 4”

1/2” x 4-1/2”

1/2” x 5”

1/2” x 5-1/2”

1/2” x 6”

1/2” x 12”

1/2” x 18”

1/2” x 24”

1/2” x 36”

3/4” x close

3/4” x 1-1/2”

3/4” x 3”

3/4” x 4”

3/4” x 6”

1” x close

1” x 2”

1” x 2-1/2”

1” x 3”

1” x 4”

1” x 5”

1” x 6”

SIZE

3/8” x close

3/8” x 1-1/2”

3/8” x 2”

3/8” x 2-1/2”

3/8” x 3”

3/8” x 3-1/2”

3/8” x 4”

3/8” x 4-1/2”

3/8” x 5”

3/8” x 5-1/2”

3/8” x 6”

3/8” x 12”

1/2” x close

1/2” x 1-1/2”

1/2” x 2”

1/10

50/100

50/200

1/30

25/100

25/100

20/200

20/200

75/300

25/200

50/200

25/100

25/100

25/100

25/100

25/100

25/50

1/10

1/10

25/100

25/100

25/100

25/50

25/50

CTN/MSTR

50/400

25/400

50/400

50/300

50/300

50/200

25/100

50/200

50/200

25/100

25/100

25/50

50/400

50/400

50/400

Chrome Plated 90° Street Elbow

• Lead Free

PART NO.

B50094LF

B50098LF

B50103LF

Chrome Plated Tee

• Lead Free

PART NO.

B50031LF

B50032LF

B50033LF

Chrome Plated Coupling

• Lead Free

PART NO.

B50041LF

B50042LF

B50043LF

B50044LF

Chrome Plated Reducer

• Lead Free

PART NO.

B50051LF

B50052LF

Chrome Plated Bushing

• Lead Free

PART NO.

B50072LF

B50073LF

SIZE

1/2”

3/4”

1”

SIZE

3/8”

1/2”

3/4”

SIZE

3/8”

1/2”

3/4”

1”

SIZE

1/2”x 3/8”

3/4”x 1/2”

SIZE

1/2”x 3/8”

3/4”x 1/2”

CTN/MSTR

25/100

25/100

1/50

CTN/MSTR

50/200

50/100

1/85

CTN/MSTR

25/400

50/200

25/100

25/100

CTN/MSTR

70/280

45/180

CTN/MSTR

50/200

90/360

Chrome Plated Union

• Lead Free

PART NO.

B50092LF

B50097LF

B50100LF

SIZE

1/2”

3/4”

1”

CTN/MSTR

25/100

20/80

25/100

Chrome Plated 45° Elbow

• Lead Free

PART NO.

B50011LF

B50012LF

SIZE

3/8”

1/2”

CTN/MSTR

25/100

50/200

Chrome Plated Plug

• Lead Free

PART NO.

B50096LF

B50099LF

Chrome Plated Cap

• Lead Free

PART NO.

B50081LF

B50082LF

B50083LF

SIZE

1/2”

3/4”

CTN/MSTR

100/400

25/100

Chrome Plated 90° Elbow

150

• Lead Free

PART NO.

B50001LF

B50002LF

B50003LF

B50004LF

SIZE

3/8”

1/2”

3/4”

1”

CTN/MSTR

25/100

50/200

25/100

25/100

SIZE

3/8”

1/2”

3/4”

CTN/MSTR

150/600

100/400

50/200

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Male Hose To Male Pipe

PART NO.

G20002

G20003

G20004

MHT x MPT

3/4”x 1/2”

3/4”x 3/4”

(1/2” FIP tap)

3/4”x 1/2”

(1/2” SWT)

Male Hose To Male Pipe - Lead Free

CTN/MSTR

20/200

20/200

50/200

PART NO.

G20102

G20103

MHT x MPT

3/4”x 1/2”

3/4”x 3/4”

(1/2” FIP tap)

CTN/MSTR

1/40

50/200

Male Hose To Male Hose

PART NO.

G20008

MHT x MHT

3/4”x 3/4”

(1/2” FIP tap)

CTN/MSTR

20/200

Brass Garden Hose Fittings

Female Hose To Male Pipe

PART NO.

G20005

G20015

G20016

G20017

FHT x MPT CTN/MSTR

3/4” x 1/2” (1/2” SWT) 10/300

3/4” x 1/2”

3/4” x 3/4”

50/250

50/250

3/4” x 3/4” (1/2” FIP tap) 10/300

Female Hose To Male Pipe - Lead Free

• Lead Free

PART NO.

G20115

G20116

FHT x MPT

3/4” x 1/2”

3/4” x 3/4”

CTN/MSTR

50/200

1/40

D

Female Hose To Female Pipe

PART NO.

G20020

G20021

FHT x FPT

3/4”x 1/2”

3/4”x 3/4”

CTN/MSTR

50/200

50/200

Male Hose To Male Hose - Lead Free

• Lead Free

PART NO.

G20108

MHT x MHT

3/4”x 3/4”

(1/2” FIP tap)

CTN/MSTR

1/40

Female Hose To Female Pipe - Lead Free

• Lead Free

PART NO.

G20120

G20121

FHT x FPT

3/4”x 1/2”

3/4”x 3/4”

CTN/MSTR

1/40

1/40

Male Hose To Female Pipe

PART NO.

G20010

G20011

MHT x FPT

3/4”x 1/2”

3/4”x 3/4”

CTN/MSTR

100/500

20/200

Female Hose To Female Hose Swivel

PART NO.

G20030

FHT x FHT

3/4” x 3/4”

CTN/MSTR

20/200

Male Hose To Female Pipe - Lead Free

• Lead Free

PART NO.

G20110

G20111

MHT x FPT

3/4”x 1/2”

3/4”x 3/4”

CTN/MSTR

1/40

1/40

Female Hose To Female Hose Swivel -

Lead Free

• Lead Free

PART NO.

G20130

FHT x FHT

3/4” x 3/4”

CTN/MSTR

1/40

Female Hose To Female Pipe Swivel

PART NO.

G20031

G20032

FHT x FPT

3/4” x 1/2”

3/4” x 3/4”

CTN/MSTR

20/200

125/250

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 151

Brass Garden Hose Fittings

Female Hose To Female Pipe Swivel -

Lead Free

• Lead Free

PART NO.

G20131

G20132

FHT x FPT

3/4” x 1/2”

3/4” x 3/4”

CTN/MSTR

1/40

1/40

D

Hose Barb To Female Hose Swivel

• Lead Free

PART NO.

G20035

G20036

G20037

G20038

HB x FHT

3/8”x 3/4”

1/2”x 3/4”

5/8”x 3/4”

3/4”x 3/4”

CTN/MSTR

10/400

20/245

10/400

10/400

Hose Barb To Female Hose Swivel -

Lead Free

• Lead Free

PART NO.

G20136

G20137

G20138

HB x FHT

1/2”x 3/4”

5/8”x 3/4”

3/4”x 3/4”

CTN/MSTR

50/200

50/200

50/200

Hose Barb To Male Hose

PART NO.

G20040

G20041

G20042

G20043

HB x MHT

3/8”x 3/4”

1/2”x 3/4”

5/8”x 3/4”

3/4”x 3/4”

CTN/MSTR

10/300

50/200

1/200

50/200

Hose Barb To Male Hose - Lead Free

• Lead Free

PART NO.

G20141

G20142

G20143

HB x MHT

1/2”x 3/4”

5/8”x 3/4”

3/4”x 3/4”

CTN/MSTR

50/200

50/200

50/200

Male Pipe To Female Hose Swivel

PART NO.

G20045

G20047

MPT x FHT

1/4”x 3/4”

1/2”x 3/4”

CTN/MSTR

10/300

50/200

Hose WYE - Lead Free

• Lead Free

PART NO.

G20150

DESCRIPTION CTN/MSTR

3/4” x 3/4” 1/100

Garden Hose Shut Off

• Buna-N seals

PART NO.

G20051

G20053

G20054

DESCRIPTION CTN/MSTR

Dual shut off/ green ABS

16/192

Brass hose with shut off “wye”

CP die cast with shut off “wye”

15/60

20/100

Garden Hose Cap

PART NO.

G20055

G20056

FHT

3/4”

3/4” with chain

CTN/MSTR

100/600

10/600

Garden Hose Cap - Lead Free

• Lead Free

PART NO.

G20155

FHT

3/4” with washer

CTN/MSTR

1/500

Garden Hose Washer

PART NO.

G20057

G20057R

SIZE

3/4” vinyl

3/4” red rubber

CTN/MSTR

1/5000

1/2500

Garden Hose Filter Washer

PART NO.

G20060

SIZE

3/4”

CTN/MSTR

10/1000

Hose WYE

Evaporation Cooler Drain

PART NO.

G20006

MHT x FPT

3/4”x 1/2”

CTN/MSTR

25/200

PART NO.

G20050

DESCRIPTION CTN/MSTR

3/4” x 3/4” 20/200

152 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Hose Barb To Male Pipe

• Barb refers to hose I.D.

PART NO.

G25022

G25032

G25034

G25042

G25044

G25046

G25048

G25052

G25054

G25056

G25062

G25064

G25066

G25068

G25612

G25084

G25086

G25088

G25812

G25106

G25108

G25101

G25128

G25121

G25161

G25169

BARB x MPT

1/8”x 1/8”

3/16”x 1/8”

3/16”x 1/4”

1/4”x 1/8”

1/4”x 1/4”

1/4”x 3/8”

1/4”x 1/2”

5/16”x 1/8”

5/16”x 1/4”

5/16”x 3/8”

3/8”x 1/8”

3/8”x 1/4”

3/8”x 3/8”

3/8”x 1/2”

3/8”x 3/4”

1/2”x 1/4”

1/2”x 3/8”

1/2”x 1/2”

1/2”x 3/4”

5/8”x 3/8”

5/8”x 1/2”

5/8”x 3/4”

3/4”x 1/2”

3/4”x 3/4”

1”x 3/4”

1”x 1”

Barb To Barb Hose Splicer

• Barb refers to hose I.D.

PART NO.

G29003

G29004

G29005

G29006

G29008

G29010

BARB

3/16”

1/4”

5/16”

3/8”

1/2”

5/8”

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

10/100

Hose Barb To Female Pipe

• Barb refers to hose I.D.

PART NO.

G26022

G26032

G26034

G26042

G26044

G26046

G26052

G26054

G26056

G26062

G26064

G26066

G26068

G26084

G26086

G26088

G26121

G26161

Brass Hose Barbs

Hose Barb To Male Pipe Elbow

• Barb refers to hose I.D.

PART NO.

G27042

G27044

G27054

G27062

G27064

G27066

G27068

G27084

G27086

G27088

G27106

G27108

BARB x MPT

1/4”x 1/8”

1/4”x 1/4”

5/16”x 1/4”

3/8”x 1/8”

3/8”x 1/4”

3/8”x 3/8”

3/8”x 1/2”

1/2”x 1/4”

1/2”x 3/8”

1/2”x 1/2”

5/8”x 3/8”

5/8”x 1/2”

BARB x FPT

1/8”x 1/8”

3/16”x 1/8”

3/16”x 1/4”

1/4”x 1/8”

1/4”x 1/4”

1/4”x 3/8”

5/16”x 1/8”

5/16”x 1/4”

5/16”x 3/8”

3/8”x 1/8”

3/8”x 1/4”

3/8”x 3/8”

3/8”x 1/2”

1/2”x 1/4”

1/2”x 3/8”

1/2”x 1/2”

3/4”x 3/4”

1”x 3/4”

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

D

Hose Barb To Female Ball End Swivel

• Barb refers to hose I.D.

PART NO.

G28044

G28066

G28088

BARB x NPSM

1/4”x 1/4”

3/8”x 3/8”

1/2”x 1/2”

CTN/MSTR

10/100

10/100

10/100

Hose Barb Tee

• Barb refers to hose I.D.

PART NO.

G24004

G24006

BARB x BARB

X BARB

1/4”

3/8”

CTN/MSTR

10/100

10/100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 153

Nylon Fittings

Nylon Hose Barb Splicer

• Barb refers to hose I.D.

PART NO.

N10001

N10002

N10003

N10004

N10005

N10006

N10007

N10008

BARB x BARB

1/8”x 1/8”

1/4”x 1/4”

5/16”x 5/16”

3/8”x 3/8”

1/2”x 1/2”

5/8”x 5/8”

3/4”x 3/4”

1”x 1”

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

10/100

10/100

5/50

D

Nylon Hose Barb Tee

• Barb refers to hose I.D.

PART NO.

N11001

N11002

N11003

N11004

N11005

N11006

N11007

N11008

BARB x BARB

1/8”x 1/8”x 1/8”

1/4”x 1/4”x 1/4”

3/8”x 3/8”x 3/8”

1/2”x 1/2”x 3/8”

1/2”x 1/2”x 1/2”

5/8”x 5/8”x 5/8”

3/4”x 3/4”x 3/4”

1”x 1”x 1”

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

10/100

10/100

5/50

Nylon Hose Barb Adapter

• Barb refers to hose I.D.

PART NO.

N14001

N14002

N14003

N14004

N14005

N14006

N14007

N14008

N14009

N14010

N14011

N14012

N14013

N14014

N14015

N14016

N14017

N14018

N14019

MPT x BARB

1/4”x 1/4”

1/4”x 3/8”

3/8”x 1/4”

3/8”x 3/8”

3/8”x 1/2”

1/2”x 1/4”

1/2”x 3/8”

1/2”x 1/2”

1/2”x 5/8”

1/2”x 3/4”

3/4”x 3/8”

3/4”x 1/2”

3/4”x 5/8”

3/4”x 3/4”

3/4”x 1”

1”x 1/2”

1”x 5/8”

1”x 3/4”

1”x 1”

Nylon Hose Barb Elbow

• Barb refers to hose I.D.

PART NO.

N12001

N12002

N12003

N12004

N12005

N12006

BARB x BARB

1/4”x 1/4”

3/8”x 3/8”

1/2”x 1/2”

5/8”x 5/8”

3/4”x 3/4”

1”x 1”

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

5/50

Nylon Male Garden Hose To Female Pipe

PART NO.

N18001

N18002

MHT x FPT

3/4”x 1/2”

3/4”x 3/4”

CTN/MSTR

10/100

10/100

Nylon Male Garden Hose To Male Pipe

PART NO.

N09001

N09002

MHT x MPT

3/4”x 1/2”

3/4”x 3/4”

CTN/MSTR

10/100

10/100

Nylon Garden Hose Cap

PART NO.

N06001

FHT

3/4”

CTN/MSTR

10/100

Nylon Female Garden Hose To Female Pipe

PART NO.

N07001

FHT x FPT

3/4”x 1/2”

CTN/MSTR

10/100

Nylon Female Hose Barb Adapter

• Barb refers to hose I.D.

PART NO.

N15001

BARB x FPT

1/2” x 1/2”

CTN/MSTR

10/100

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

5/50

5/50

5/50

5/50

5/50

154 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Nylon Male Insert Adapter

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I11001

I11002

I11003

I11004

I11005

I11006

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

10/100

Nylon Fittings

Nylon Insert Combination Elbow

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I11025

I11026

I11027

I11028

SIZE

1/2”

3/4”

1”

1-1/4”

CTN/MSTR

10/100

10/100

10/100

10/100

Nylon Insert Coupling

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I11007

I11008

I11009

I11010

I11011

I11012

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

10/100

Nylon Insert Elbow

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I11013

I11014

I11015

I11016

I11017

I11018

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

5/50

D

Nylon Insert Tee

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I11019

I11020

I11021

I11022

I11023

I11024

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

10/100

10/100

10/100

10/100

10/100

5/50

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 155

Poly Insert Fittings

Poly Male Insert Adapter

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I10001

I10002

I10003

I10004

I10005

I10006

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

10/100

10/250

10/160

10/80

5/60

5/40

D

Poly Female Insert Adapter

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I10007

I10008

I10009

I10010

SIZE

1/2”

3/4”

1”

1-1/4”

CTN/MSTR

10/400

10/250

10/160

10/80

Poly Insert Coupling

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I10011

I10012

I10013

I10014

I10015

I10016

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

10/400

10/250

10/160

10/80

5/60

5/40

Poly Reducing Insert Coupling

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I10017

I10018

I10019

I10020

I10021

I10022

SIZE

3/4” x 1/2”

1” x 1/2”

1” x 3/4”

1-1/4” x 1”

1-1/2” x 1-1/4”

2” x 1-1/2”

CTN/MSTR

10/300

10/220

10/220

10/100

5/15

5/15

Poly Male Insert Reducer

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I10040

I10041

I10042

SIZE

3/4” x 1/2”

1” x 3/4”

1-1/4” x 1”

CTN/MSTR

10/300

10/220

10/100

Poly Insert Elbow

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I10023

I10024

I10025

I10026

I10027

I10028

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

10/300

10/180

10/100

5/60

5/40

5/25

Poly Insert Tee

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I10029

I10030

I10031

I10032

I10033

I10034

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

10/180

10/100

10/60

5/40

5/30

5/15

Poly Insert x MIP Combination Elbow

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I10035

I10036

I10037

I10038

I10039

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

CTN/MSTR

10/300

10/200

10/100

5/50

5/50

Poly Insert Reducing Tee

• For flexible polyethylene plastic pipe

• NSF listed

PART NO.

I10043

I10044

I10045

I10046

I10047

I10048

I10049

SIZE

3/4” x 3/4” x 1/2”

3/4” x 1/2” x 1/2”

1” x 1” x 1/2”

1” x 1” x 3/4”

1” x 3/4” x 3/4”

1-1/2” x 1-1/2” x 1”

2” x 2” x 1”

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

156 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Red Brass Male Insert Adapter

• For flexible polyethylene plastic pipe

• Lead free

PART NO.

I13001LF

I13002LF

I13003LF

I13004LF

I13005LF

I13006LF

SIZE

1/2”

3/4”

1”

1 1/4”

1 1/2”

2”

CTN/MSTR

10/200

10/200

10/100

10/100

10/60

5/40

Red Brass Insert Fittings

Red Brass Insert Coupling

• For flexible polyethylene plastic pipe

• Lead free

PART NO.

I13016LF

I13017LF

I13018LF

I13019LF

I13020LF

SIZE

3/4”

1”

1 1/4”

1 1/2”

2”

CTN/MSTR

1/100

1/100

1/100

1/100

10/100

Red Brass Male Insert Reducer

• For flexible polyethylene plastic pipe

• Lead free

PART NO.

I13007LF

INSERT x MPT

1” x 3/4”

CTN/MSTR

1/100

Red Brass Insert Tee

• For flexible polyethylene plastic pipe

• Lead free

PART NO.

I13021LF

I13022LF

I13023LF

SIZE

3/4”

1”

1 1/4”

CTN/MSTR

1/100

1/100

10/50

D

Red Brass Female Insert Adapter

• For flexible polyethylene plastic pipe

• Lead free

PART NO.

I13010LF

I13011LF

I13012LF

I13013LF

SIZE

3/4”

1”

1-1/4”

1-1/2”

CTN/MSTR

10/100

1/200

1/100

1/100

Red Brass Insert Elbow

• For flexible polyethylene plastic pipe

• Lead free

PART NO.

I13024LF

I13025LF

I13026LF

SIZE

3/4”

1”

1 1/4”

CTN/MSTR

1/100

1/100

1/50

Red Brass Insert x MIP 90° Elbow

• For flexible polyethylene plastic pipe

• Lead free

PART NO. INSERT

I13031LF 3/4”

I13032LF 1”

I13033LF 1”

MIP

3/4”

3/4”

1”

CTN/MSTR

1/100

1/100

10/100

Red Brass Insert Male Rope Adapter

• For flexible polyethylene plastic pipe

• Lead free

PART NO.

I13027LF

I13029LF

SIZE

1”

1”x 1 1/4”

CTN/MSTR

1/100

1/100

Red Brass Insert x Sweat Adapter

• For flexible polyethylene plastic pipe

• Lead free

PART NO. INSERT

I13036LF 3/4”

I13037LF 1”

SWEAT

3/4”

1”

CTN/MSTR

10/100

10/200

Brass PEX to PB (Polybutylene) Adapter

• Lead free

PART NO.

C76100LF

C76101LF

SIZE

1/2”

3/4”

CTN/MSTR

25/500

25/300

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 157

Galvanized Insert Fittings

Steel Male Insert Adapter

• For flexible polyethylene plastic pipe

PART NO.

I12001

I12002

I12003

I12004

I12005

I12006

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

50/300

25/200

25/100

12/96

6/84

5/40

INSERT FITTINGS VS HOSE BARBS?

I nsert Fittings only fit polyethylene plastic pipe

(water service pipe).

Hose Barbs are designed to fit the inside diameter of various rubber hose sizes.

Both types of fittings are normally secured with hose gear clamps.

D

Steel Female Insert Adapter

• For flexible polyethylene plastic pipe

PART NO.

I12007

I12008

I12009

I12010

I12011

I12012

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

25/200

25/150

15/150

12/96

10/60

4/20

Steel Insert Coupling

• For flexible polyethylene plastic pipe

PART NO.

I12013

I12014

I12015

I12016

I12017

I12018

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

50/300

25/200

25/200

12/96

6/84

5/40

158 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Brass Needle Valves

Brass Angle Compression Needle Valve

PART NO.

N10442LF

N10444LF

COMP x MIP

1/4” x 1/8”

1/4” x 1/4”

CTN/MSTR

20/400

20/400

Brass Straight Compression Needle Valve

PART NO.

N10544LF

N10566LF

COMP x COMP

1/4” x 1/4”

3/8” x 3/8”

CTN/MSTR

20/400

20/400

Icemaker / Humidifier Kit

• 1/4” tubing

• Self piercing valve

• Brass fittings

• Lead free

PART NO. TUBE SIZE

S92025 1/4” x 25’ poly tubing

S92030 1/4” x 25’ copper tubing

S92031 1/4” x 15’ copper tubing

CTN/MSTR

1/10

1/10

1/10

D

Brass Straight Compression Needle Valve

PART NO.

N10664LF

COMP x MIP

3/8” x 1/4”

CTN/MSTR

20/400

Brass Pipe Needle Valve

PART NO.

N10944LF

FIP x FIP

1/4” x 1/4”

CTN/MSTR

20/200

Brass Saddle Clamp

• Fits up to 3/4” iron pipe

• Fits up to 1” hard copper

• Unassembled

PART NO.

N01038

FPT

1/8”

CTN/MSTR

10/200

Brass Saddle Clamp With Self Piercing Valve

• Fits up to 3/4” iron pipe

• Fits up to 1” hard copper

• Unassembled

PART NO.

N01039

OD

1/4”

CTN/MSTR

10/200

Self Piercing Valve

• 1/4” OD compression outlet

• Fits 3/8” to 1.315” OD tube

• Lead free

PART NO.

S92001

TUBE SIZE

1/4”

CTN/MSTR

50/100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 159

Shut-Off Valves

Gas Shut-Off Valve

• Rated at 2 PSIG

• Cast bronze plug style

D

Lever Handle

PART NO.

G17025

G17037

G17050

G17075

G17100

G17125

G17150

G17200

Square Head

PART NO.

G18025

G18037

G18050

G18075

G18100

G18125

G18150

G18200

Flat/Tee Head

PART NO.

G19025

G19037

G19050

G19075

G19100

G19125

G19150

G19200

SIZE

1/4”

3/8”

1/2” AGA

3/4” AGA

1”

1-1/4”

1-1/2”

2”

SIZE

1/4”

3/8”

1/2” AGA

3/4” AGA

1”

1-1/4”

1-1/2”

2”

SIZE

1/4”

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

Flare x Flare

• 30 PSI

PART NO.

N01014

SIZE

3/8”

CTN/MSTR

1/25

1/25

1/50

1/50

1/25

1/10

1/10

1/5

CTN/MSTR

1/25

1/25

1/50

1/50

1/25

1/10

1/10

1/5

CTN/MSTR

1/25

1/25

1/50

1/50

1/25

1/10

1/10

1/5

Female Pipe x Female Pipe

• 30 PSI

PART NO.

N01010

N01011

SIZE

1/8”

1/4”

Female Pipe x Male Pipe

• 30 PSI

PART NO.

N01027

N01028

N01029

SIZE

1/8”

1/4”

3/8”

CTN/MSTR

1/10

CTN/MSTR

1/10

1/10

CTN/MSTR

1/10

1/10

1/10

160 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Drain Cock Tee Handle with Bibb

• Hose x Male IPT

PART NO.

N01032

SIZE

1/4”

CTN/MSTR

1/500

Drain Cocks/Air Cocks

Satin Brass Air Cock Female x Female

Lever Handle Round Shoulder

• Spring bottoms

PART NO.

A11004

SIZE

1/4” x 1/4”

CTN/MSTR

1/100

Drain Cock External Seat

PART NO.

N01033

N01034

SIZE

1/8”

1/4”

CTN/MSTR

1/1000

1/1000

Satin Brass Air Cock Female x Female

Tee Handle HEX Shoulder

• Spring bottoms

PART NO.

A11005

SIZE

1/4” x 1/4”

CTN/MSTR

1/200

D

Drain Cock

PART NO.

N01001

N01002

SIZE

1/8”

1/4”

CTN/MSTR

1/500

1/500

Satin Brass Air Cock Female x Female

Tee Handle Round Shoulder

• Spring bottoms

PART NO.

A11016

A11006

SIZE

1/8” x 1/8”

1/4” x 1/4”

CTN/MSTR

1/50

100/200

Satin Brass Air Cock Female x Male

Lever Handle HEX Shoulder

• Spring bottoms

PART NO.

A11011

A11001

SIZE

1/8” x 1/8”

1/4” x 1/4”

CTN/MSTR

1/100

100/200

Satin Brass Air Cock Female x Female

Lever Handle HEX Shoulder

• Spring bottoms

PART NO.

A11017

A11007

SIZE

1/8” x 1/8”

1/4” x 1/4”

CTN/MSTR

1/100

1/100

Satin Brass Air Cock Male x Spigot Tee

Handle HEX Shoulder

• Spring bottoms

PART NO.

A11002

SIZE

1/4” x spigot

CTN/MSTR

100/200

Satin Brass Air Cock Female x Male

Tee Handle Round Shoulder

• Spring bottoms

PART NO.

A11008

SIZE

1/4” x 1/4”

CTN/MSTR

100/200

Satin Brass Air Cock Female x Male

Tee Handle HEX Shoulder

• Spring bottoms

PART NO.

A11003

SIZE

1/4” x 1/4”

CTN/MSTR

1/200

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 161

Ball Valves

D

Gas Ball Valve

• Forged brass body

• 3/8”x 3/4” one piece body

• 1”-2” two-piece body with plated steel handle

• Chrome plated brass ball

• Temperatures up to 175°F

• Threaded ends comply with ANSI B2.1

• CSA- certified for use with natural, manufactured, mixed, liquefied

petroleum and LP gas/air mixtures up to 2 PSIG

• UL listed 757x (1/2” and 3/4”)

• Made in Italy

Lever Handle, Female x Female

Tee Handle, Female x Female

PART NO.

B64375

B64050

B64075

B64100

B64125

B64150

B64200

PART NO.

B65375

B65050

B65075

B65100

Square Head, Female x Female

PART NO.

B66375

B66050

B66075

SIZE

3/8” FIP

1/2” FIP

3/4” FIP

1” FIP

1-1/4” FIP

1-1/2” FIP

2” FIP

SIZE

3/8” FIP

3/8” FIP

3/4” FIP

1” FIP

SIZE

3/8” FIP

1/2” FIP

3/4” FIP

CTN/MSTR

10/100

10/100

10/100

6/36

4/24

4/16

2/10

CTN/MSTR

10/100

10/100

10/100

6/36

CTN/MSTR

10/100

10/100

10/100

Lever Handle Gas Ball Valve

• Forged brass body

• One piece body construction

• 3/4” Chrome plated forged brass ball

• Temperatures up to 175°F

• Threaded ends comply with ANSI B2.1

• CSA- certified for use with natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures up to 2 PSIG

• Made in Italy

Flare x Female

PART NO.

B67375

B67050

B67937

B67975

SIZE

3/8” flare x 1/2” FIP

1/2” flare x 1/2” FIP

15/16” flare x 1/2” FIP

15/16” flare x 3/4” FIP

CTN/MSTR

10/100

10/100

10/100

10/100

Flare x Male

PART NO.

B68001

SIZE

1/2” flare x 1/2” MIP

CTN/MSTR

10/100

Flare x Flare

PART NO.

B68375

B68050

B68058

SIZE

3/8” flare x 3/8” flare

1/2” flare x 1/2” flare

5/8” flare x 5/8” flare

CTN/MSTR

10/100

10/100

10/100

Two-Piece Gas Ball Valve

• Forged brass body

• Two-piece body

• Lever handle

• Chrome plated brass ball

• Temperatures up to 125° F

• CSA- certified for use with natural, manufactured,

mixed liquefied petroleum and L.P. gas/air mixtures up to 2 PSIG

• Made in Italy

PART NO.

B64450

B64475

SIZE

1/2”

3/4”

CTN/MSTR

10/50

10/50

Gas Heater Valve

• Forged brass body

• One piece body construction

• Chrome plated forged brass ball

• Temperatures up to 175°F

• 9/16” - 24 Fine Thread Flare (for 3/8” tube)

• CSA certified for use with natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures up to 2 PSIG

• Made in Italy

PART NO.

B69050

SIZE

9/16”-24 x 1/2” FIP

CTN/MSTR

10/100

Texas Pattern Gas Ball Valve

• Forged brass body

• One piece body construction

• Lever handle

• Female IPS x hose end x 1/8” MIP

• CSA- certified for use with natural, manufactured,

mixed liquefied petroleum and L.P. gas/air mixtures up to 2 PSIG

• Made in Italy

PART NO.

B69121

SIZE

1/2” FIP x

1/8” MIP

CTN/MSTR

10/100

162 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Brass Gas Ball Valve

• Forged brass body

• Two piece body construction

• Chrome plated brass ball

• Double O-ring packing

• PTFE Seats

• 1/4 turn aluminum handle

• 1/2 PSI for indoor appliance connections per ANSI Z21.15/CGA 9.1

• Blowout-proof stem

• 5 PSI for indoor shutoff per

CGA 91-002 & ASME B16.44

• CSA listed

Brass Ball Valve

• Full-port design

• Forged brass body up to 4”

• Chrome plated brass ball

• Adjustable packing nut

• Non-sticking teflon seats

• 1/4 turn zinc plated steel handle

Threaded

PART NO.

B67200

B67201

B67202

B67203

B67204

B67205

B67206

Sweat

PART NO.

B67208

B67209

B67210

B67211

B67212

B67213

Female x Female

PART NO.

B67100

B67101

Flare x Female

PART NO.

B67102

B67103

SIZE

1/2” FIP x 1/2” FIP

3/4” FIP x 3/4” FIP

SIZE

3/8” FL x 1/2” FIP

1/2” FL x 1/2” FIP

CTN/MSTR

1/160

1/100

CTN/MSTR

1/160

1/160

Flare x Male

PART NO.

B67104

SIZE

1/2” FL x 1/2” MIP

CTN/MSTR

1/160

Flare

PART NO.

B67105

SIZE

3/8” FL x 3/8” FL

CTN/MSTR

1/160

B67106 1/2” FL x 1/2” FL 1/160

Ball Valves

Brass Ball and Waste Valve

• Full-port with waste design

• Forged brass body

• Chrome plated brass ball

• Adjustable packing nut

• Non-sticking teflon seats

• 1/4 turn zinc plated steel handle

• 600 PSI, WOG (water, oil, gas)

Sweat

PART NO.

B67214

B67215

B67216

• Working steam pressure: 150 PSI

• Blowout-proof stem

• Teflon packing for safety against leakage

• NSF61 certified

• UPC listed

• Lead free

SIZE

1/2”

3/4”

1”

CTN/MSTR

10/60

10/60

5/40

Threaded

PART NO.

B67217

B67218

B67219

SIZE

1/2”

3/4”

1”

CTN/MSTR

10/60

10/60

5/40

D

Brass Stop Valve

• Cast brass body

• Cast iron handle

• 125 PSI WOG to 100° F

Threaded

PART NO.

B67312

B67313

• Maximum temperature 180°F

• Lead free

SIZE

1/2”

3/4”

CTN/MSTR

6/48

6/48

Stop & Waste Valve Threaded

PART NO.

B67315

SIZE

3/4”

CTN/MSTR

10/100

• 600 PSI, WOG (water, oil, gas)

• Working steam pressure: 150 PSI

• Blowout-proof stem

• Teflon packing for safety against leakage

• UPC listed

• Lead free

SIZE

3/8”

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

20/100

50/100

30/60

20/40

12/24

9/18

6/12

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

50/100

30/60

20/40

12/24

9/18

6/12

Sweat

PART NO.

B67316

B67317

Male

PART NO.

B67320

B67321

• Forged brass body

• Threads to hose

• Cast iron handle

Female

PART NO.

B67322

B67323

SIZE

1/2”

3/4”

Brass Broiler Drain Valve

• Forged brass body

• Copper or threads to hose

• Cast iron handle

• Non-sticking teflon seats

• 125 PSI WOG to 100°F

• Maximum temperature 180°F

• UPC listed

SIZE

1/2” MIP x 3/4” MHT

3/4” MIP x 3/4” MHT

• 125 PSI WOG to 100°F

• Maximum temperature 180°F

CTN/MSTR

10/100

10/100

SIZE

1/2” FIP x 3/4” MHT

3/4” FIP x 3/4” MHT

CTN/MSTR

6/48

10/100

CTN/MSTR

10/100

10/100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 163

Ball Valves/Radiator Accessories

D

PVC Ball Valve Solvent Ends

• One piece body construction

• Standard port

• EPDM seats and o-rings

• Working pressure 150 PSI at 73°F

• Quarter turn operation

• Not for compressed air

• Ideal for swimming pools, irrigation and water supply uses

PART NO.

• Solvent ends comply with ASTM D 2466

• Threaded ends comply with ANSI B2.1

• For cold water lines

• Large flow opening

SIZE CTN/MSTR

B90050

B90075

B90100

B90125

B90150

B90200

B90250

B90300

B90400

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

4”

1/162

1/80

1/84

1/50

1/50

1/24

1/15

1/2

1/1

PVC Ball Valve with Threaded Ends

• One-piece body construction

• Standard port

• EPDM seats and o-rings

• Working pressure 150 PSI at 73°F

• Quarter turn operation

• Not for compressed air

• Ideal for swimming pools, irrigation and water supply uses

PART NO.

B91050

• Solvent ends comply with ASTM D 2466

• Threaded ends comply with ANSI B2.1

• For cold water lines

• Large flow opening

SIZE

1/2”

3/4”

CTN/MSTR

1/162

25/100 B91075

B91100

B91125

B91150

1”

1-1/4”

1-1/2”

1/84

1/60

1/40

B91200

B91250

B91300

B91400

2”

2-1/2”

3”

4”

6/24

1/16

1/10

1/1

Radiator Coin Key Air Valve and Key

• 1/8” threads

• 125 PSI

• CARTON QUANTITIES ONLY

PART NO.

R20001

R20002

R20003

DESCRIPTION

Vent valve with key

Key only

Valve only

Bronze Steam Radiator Angle Valve

PART NO.

R20005

Radiator Angle Air Valve

PART NO.

R20150

R20151

SIZE

1/2”

SIZE

1/8”

1/8” adjustable

Dual Check Backflow Preventer

• Female by female

• Forged brass body

• 150 psi

• Acetyl-resin check modules

• Stainless steel spring

• 180° F maximum temperature

• Lead free

PART NO.

B59001LF

B59002LF

SIZE

3/4”

1”

CTN/MSTR

50/500

100/5000

100/1000

CTN/MSTR

10/60

CTN/MSTR

12/144

12/144

CTN/MSTR

1/100

1/25

CPVC Ball Valve

• Standard port

• For use on CPVC tubing size (OD)

• Teflon seats

• EPDM o-rings

• One piece body construction

• Large flow opening

PART NO.

B92050

B92075

• For hot or cold water lines up to 100 PSI at temperature up to 180°F

• Solvent ends comply with ASTM D2846

• Quarter turn operation

• NSF 61 listed

SIZE

1/2” (5/8” OD)

3/4” (7/8” OD)

CTN/MSTR

10/100

10/100

Single Union PVC Swimming Pool Valve

164

• Teflon seats

• 150 PSI working pressure

• EPDM o-rings seal on union end

• Suitable for swimming pools, spas and plumbing

• Full port

• Solvent ends

PART NO.

B95150

B95200

SIZE

1-1/2”

2”

CTN/MSTR

8/32

5/20

Inline PVC Check Valve

PART NO.

C30050

C30075

C30100

C30125

C30150

C30200

Threaded Ends

PART NO.

C31050

C31075

C31100

C31125

C31150

C31200

• Stainless steel spring

• EPDM seats

• Maintenance-free operation

• .5 PSI required to open unit

• 200 PSI static pressure rating at 77°F

• Use anywhere to stop backflow and siphoning

• Suitable for swimming pools, hot tubs, spas and solar installations

Solvent Ends

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

30/120

30/120

16/64

12/48

8/32

4/16

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

CTN/MSTR

30/120

30/120

16/64

12/48

8/32

4/16

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Forged Brass Hose Bibb

• Hard chrome ball

• Quarter-turn operation

• Teflon seats

• T-handle

PART NO.

B60950

B60975

SIZE

1/2”

3/4”

CTN/MSTR

10/100

10/100

Hose Bibbs/Gear Clamps

Replacement Clamp For Flexible Coupling

• Made in USA

• CARTON QUANTITIES ONLY

PART NO.

G15002

G15003

G15004

G15006

G15008

SIZE

2”

3”

4”

6”

8”

CTN/MSTR

10/200

10/100

10/100

1/100

1/50

Cast Brass Hose Bibb

• Lead Free

PART NO.

MIP x MALE HOSE CTN/MSTR

B59050

B59075

B59100

1/2” x 3/4”

3/4” x 3/4”

1” x 1”

10/100

10/100

6/36

Economy Hose Bibb Vacuum Breaker

• Brass

• 3/4” hose thread

• Vandal-proof breakoff screw

• ASSE 1011

PART NO.

G04004

DESCRIPTION

Economy

CTN/MSTR

20/200

G04003LF Economy - Lead Free 20/200

Micro Size Gear Clamp

• 5/16” band

• Made in USA

• CARTON QUANTITIES ONLY

Part Stainless

PART NO. TRADE SIZE

G08004

G08006

G08008

G08012

G08016

G08020

G08024

8

12

4

6

16

20

24

All Stainless

PART NO. TRADE SIZE

G09004 4

G09006

G09008

G09012

G09016

G09020

6

8

12

16

20

G09024 24

SIZE

1/4” - 5/8”

5/16” - 7/8”

3/8” - 1”

1/2” - 1-1/4”

1/2” - 1-1/2”

3/4” - 1-3/4”

1” - 2”

SIZE

1/4” - 5/8”

5/16” - 7/8”

1/2” - 1”

1/2” - 1-1/4”

1/2” - 1-1/2”

3/4” - 1-3/4”

1” - 2”

CTN/MSTR

10/1000

10/1000

10/500

10/500

10/500

10/500

10/500

CTN/MSTR

10/1000

10/1000

10/500

10/500

10/500

10/500

10/500

D

Hose Faucet Anchor

• Long lasting solution for loose exterior faucets

• Works with any wall material ( brick, concrete, vinyl siding or stucco)

• For repair or new home applications

• Fits all exterior or faucet water lines

• Corrosion free

PART NO.

B59000

DESCRIPTION

Hose faucet anchor

CTN/MSTR

1/100

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 165

Gear Clamps

D

Full Size Gear Clamp

166

• 1/2” band

• Made in USA

• CARTON QUANTITIES ONLY

Part Stainless

PART NO.

G10006

G10008

G10010

G10012

G10016

G10020

G10024

G10032

G10036

G10040

G10052

G10072

G10080

G10104

All Stainless

PART NO.

G11056

G11064

G11072

G11080

G11088

G11096

G11104

G11006

G11008

G11010

G11012

G11016

G11020

G11024

G11028

G11032

G11036

G11040

G11044

G11048

G11052

24

32

36

40

12

16

20

TRADE

SIZE

6

8

10

52

72

80

104

36

40

44

48

52

56

64

20

24

28

32

TRADE

SIZE

6

8

10

12

16

72

80

88

96

104

SIZE

3/8” - 7/8”

7/16” - 1”

1/2” - 1-1/16”

1/2” - 1-1/4”

11/16” - 1-1/2”

3/4” - 1-3/4”

1” -2”

1-5/16” - 2-1/4”

1-9/16” - 2-1/2”

1-3/4” - 2-3/4”

1-1/8” - 3”

2-1/4” - 3 1/4”

1-5/8” - 3-1/2”

1-7/8” - 3-3/4”

2-1/8” - 4”

2-1/2” - 4-1/2”

3” -5”

3-1/2” - 5-1/2”

4” -6”

4-3/4” - 6-1/2”

5” -7”

SIZE

3/8” - 7/8”

7/16” - 1”

1/2” - 1-1/16”

1/2” - 1-1/4”

3/4” - 1-1/2”

3/4” - 1-3/4”

1” -2”

1-1/2” - 2-1/2”

7/8” - 2-3/4”

1-1/8” - 3”

1-7/8” - 3-3/4”

3-1/8” - 5”

3-5/8” - 5-1/2”

5” - 7”

CTN/MSTR

10/200

10/200

10/500

10/500

10/500

10/500

10/500

10/500

10/500

10/500

10/200

10/200

10/200

10/200

10/100

10/100

10/100

10/100

10/100

10/100

10/100

CTN/MSTR

10/200

10/200

10/500

10/500

10/500

10/500

10/500

10/500

10/500

10/200

10/100

10/100

10/100

10/100

“68” Series Stainless Steel Gear Clamp

• 9/16” band

• All stainless, 300 grade construction

• Ideal for well drilling and applications requiring marine grade stainless clamps

• Made in USA

• CARTON QUANTITIES ONLY

PART NO.

G14006

G14008

G14010

G14012

G14016

G14020

G14024

G14028

G14032

G14036

G14040

G14044

G14048

G14052

G14056

G14064

G14072

G14080

G14088

G14096

G14104

32

36

40

44

48

52

56

16

20

24

28

TRADE

SIZE

6

8

10

12

64

72

80

88

96

104

SIZE

3/8” -7/8”

7/16” -1”

1/2” - 1-1/16”

1/2” - 1-1/4”

11/16” - 1-1/2”

3/4” - 1-3/4”

1” - 2”

1-1/4” - 2-1/4”

1-1/2” - 2-1/2”

1-3/4” - 2-3/4”

1-1/8” - 3”

2-1/4” - 3-1/4”

1-5/8” - 3-1/2”

1-7/8” - 3-3/4”

2-1/8” - 4”

2-1/2” - 4-1/2”

3” -5”

3-1/2” - 5-1/2”

4” - 6”

4-1/2” - 6-1/2”

5” - 7”

CTN/MSTR

10/200

10/200

10/500

10/500

10/500

10/500

10/500

10/500

10/500

10/200

10/200

10/200

10/200

10/100

10/100

10/100

10/100

10/100

10/100

10/100

10/100

Stainless Steel Gear Clamp

• 1/2” band

• All stainless

• Hanging bag

• CARTON QUANTITIES ONLY

PART NO.

G16006

G16008

G16010

G16012

G16016

G16020

G16024

G16028

G16032

G16036

G16040

G16044

G16048

G16052

G16056

G16064

G16072

G16080

G16088

G16096

G16104

28

32

36

40

44

48

52

12

16

20

24

TRADE

SIZE

6

8

10

88

96

104

56

64

72

80

SIZE CTN/MSTR

3/8” - 7/8”

7/16” -1”

1/2” - 1-1/16”

1/2” - 1-1/4”

5/8” - 1-1/2”

3/4” - 1-3/4”

1” - 2”

200/2000

100/1000

100/1000

100/1000

100/1000

100/1000

100/1000

1-3/8” - 2-1/4” 100/1000

1-5/8” - 2-1/2” 100/1000

1-7/8” - 2-3/4” 100/1000

2” - 3” 100/500

2-1/4” - 3-1/4”

2-5/8” - 3-1/2”

2-7/8” - 3-3/4”

100/500

100/500

100/500

3” - 4”

2-1/2” - 4-1/2”

3” -5”

3-1/2” - 5-1/2”

4” - 6”

4-1/2” - 6-1/2”

5” - 7”

100/500

100/500

100/500

50/250

50/250

50/250

50/250

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Flange Connection Gaskets & Kits

Asbestos-Free Full Face Gasket Red Rubber Ring Gasket

PART NO.

G54075

G54001

G54013

G54015

G54002

G54025

G54003

G54035

G54004

G54005

G54006

G54008

G54010

G54012

3-1/2”

4”

5”

6”

8”

10”

12”

SIZE

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

• Meets ASTM F152, F36A and F146

• 1/16” thick

• Temperature rating of 750°F

• Manufactured of Garlock 4401

150

150

150

150

150

150

150

LBS.

150

150

150

150

150

150

150

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

PART NO.

G52075

G52001

G52013

G52015

G52002

G52025

G52003

G52035

G52004

G52005

G52006

G52008

G52010

G52012

SIZE

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

3”

3-1/2”

4”

5”

6”

8”

10”

12”

• Meets ASTM D1330

• 1/16” thick

• Temperature rating of 350° F

150

150

150

150

150

150

150

LBS.

150

150

150

150

150

150

150

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

D

Asbestos-Free Ring Gasket

PART NO.

G53050

G53075

G53001

G53013

G53015

G53002

G53025

G53003

G53035

G53004

G53005

G53006

G53008

G53010

G53012

3”

3-1/2”

4”

5”

6”

8”

10”

12”

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

• Meets ASTM F152, F36A and F146

• 1/16” thick

• Temperature rating of 750°F

• Manufactured of Garlock 4401

150

150

150

150

150

150

150

150

LBS.

150

150

150

150

150

150

150

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Asbestos-Free Full Face Gasket Kit

PART NO.

G54115

G54102

G54125

G54103

G54104

G54105

G54106

G54108

G54110

G54112

5”

6”

8”

10”

12”

SIZE

1-1/2”

2”

2-1/2”

3”

4”

• Meets ASTM F152, F36A and F146

• Gaskets are 1/16” thick

• ASTM A307 hex bolts and heavy hex nuts

• Constructed of Garlock 4401

BOLT SIZE

1/2” x 2-1/4”

5/8” x 2-3/4”

5/8” x 3”

5/8” x 3”

5/8” x 3”

3/4” x 3-1/4”

3/4” x 3-1/4”

3/4” x 3-1/2”

7/8” x 3-3/4”

7/8” x 4”

BOLTS/KIT

4

4

8

4

4

8

8

8

12

12

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Red Rubber Full Face Gasket

Asbestos-Free Ring Gasket Kit

PART NO.

G51050

G51075

G51001

G51013

G51015

G51002

G51025

G51003

G51035

G51004

G51005

G51006

G51008

G51010

G51012

3”

3-1/2”

4”

5”

6”

8”

10”

12”

SIZE

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

2-1/2”

• Meets ASTM D1330

• 1/16” thick

• Temperature rating of 350° F

150

150

150

150

150

150

150

150

LBS.

150

150

150

150

150

150

150

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

PART NO.

G53101

G53113

G53115

G53102

G53125

G53103

G53104

G53105

G53106

G53108

G53110

6”

8”

10”

3”

4”

5”

SIZE

1”

1-1/4”

1-1/2”

2”

2-1/2”

• Meets ASTM F152, F36A and F146

• Gaskets are 1/16” thick

• ASTM A307 hex bolts and heavy hex nuts

• Constructed of Garlock 4401

BOLT SIZE

1/2” x 2”

1/2” x 2-1/4”

1/2” x 2-1/4”

5/8” x 2-3/4”

5/8” x 3”

5/8” x 3”

5/8” x 3”

3/4” x 3-1/4”

3/4” x 3-1/4”

3/4” x 3-1/2”

7/8” x 3-3/4”

BOLTS/KIT

4

4

4

4

4

4

8

8

8

8

12

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 167

Flange Connection Gaskets & Kits

Red Rubber Full Face Gasket Kit

• Meets ASTM D1330

• Gaskets are 1/16” thick

• ASTM A307 hex bolts and heavy hex nuts

D

PART NO.

G51101

G51102

G51125

G51103

G51135

G51104

G51105

G51106

G51108

G51110

G51112

SIZE

1”

2”

2-1/2”

3”

3-1/2”

4”

5”

6”

8”

10”

12”

BOLT SIZE

1/8” x 2-3/8”

5/8” x 2-3/4”

5/8” x 3”

5/8” x 3”

5/8” x 3”

5/8” x 3”

3/4” x 3-1/4”

3/4” x 3-1/4”

3/4” x 3-1/2”

7/8” x 3-3/4”

7/8” x 4”

BOLTS/KIT

4

4

4

8

8

4

8

12

12

8

8

Red Rubber Ring Gasket Kit

• Meets ASTM D1330

• Gaskets are 1/16” thick

• ASTM A307 hex bolts and heavy hex nuts

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Asbestos-Free Full Face Gasket Kit wtih Insulation Kit

• Meets ASTM F152, F36A and F146

• Gaskets are 1/16” thick

• Temperature rating of 750°F

• Manufactured of Garlock 4401

• To form dielectric connection use fiber washers

PART NO.

G54215

G54202

G54225

G54203

G54204

G54205

G54206

G54208

G54210

G54212

SIZE

1-1/2”

2”

2-1/2”

3”

4”

5”

6”

8”

10”

12”

BOLT SIZE

1/2” x 2-1/4”

5/8” x 2-3/4”

5/8” x 3”

5/8” x 3”

5/8” x 3”

3/4” x 3-1/4”

3/4” x 3-1/4”

3/4” x 3-1/2”

7/8” x 3-3/4”

7/8” x 4”

BOLTS/KIT

4

4

4

8

8

4

8

8

12

12

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Red Rubber Sheet Packing/Gasket Material

• Priced per roll (approximately 100 pounds)

• FULL ROLLS ONLY

PART NO.

G52115

G52102

G52125

G52103

G52104

G52105

G52106

G52108

G52110

SIZE

1-1/2”

2”

2-1/2”

3”

4”

5”

6”

8”

10”

BOLT SIZE

1/2” x 2-1/4”

5/8” x 2-3/4”

5/8” x 3”

5/8” x 3”

5/8” x 3”

3/4” x 3-1/4”

3/4” x 3-1/4”

3/4” x 3-1/2”

7/8” x 3-3/4”

BOLTS/KIT

4

4

4

8

8

4

8

8

12

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Insulation Kit with Poly Sleeves

• Use with flange connection kits

• To form dielectric connection use fiber washers

PART NO.

G55016

G55018

G55014

SIZE

1/16”x 36”x 60’

1/8”x 36”x 30’

1/4”x 36”x 15’

CTN/MSTR

1/1

1/1

1/1

Red Rubber Sheet Packing/Gasket Material

• Single 3’x 5’ sheet

PART NO.

G55116

G55118

MATERIAL

Red Rubber (1 sheet)

Red Rubber (1 sheet)

THICKNESS CTN/MSTR

1/16”

1/8”

1/1

1/1

PART NO.

G55150

G55200

G55250

G55300

G55350

G55400

G55450

G55500

G55550

G55600

SIZE

1-1/2”

2”

2-1/2”

3”

4”

5”

6”

8”

10”

12”

#SLEEVES

4

4

4

8

8

4

8

8

12

12

#WASHERS

8

8

8

8

16

16

16

16

24

24

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Gasket and Washer Materials

• Make your own gaskets and washers

• 6”x 6” square in hanging display bag

Asbestos-Free Ring Gasket Kit with Insulation Kit

• Meets ASTM F152, F36A and F146

• Gaskets are 1/16” thick

• Temperature rating of 750°F

• Manufactured of Garlock 4401

• To form dielectric connection use fiber washers

PART NO.

G53203

G53204

G53206

G53215

G53225

SIZE

3”

4”

6”

1-1/2”

2-1/2”

BOLT SIZE

5/8”x 3”

5/8”x 3”

3/4”x 3-1/4”

1/2”x 2-1/4”

5/8”x 3”

BOLTS/KIT

4

8

8

4

4

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

168

PART NO.

G55001

G55002

G55003

G55004

MATERIAL

Red Rubber (1 sheet)

Black Fiber (1 sheet)

Cork/Rubber (1 sheet)

Combo (1 sheet of each)

THICKNESS CTN/MSTR

1/16” 1/1

1/32”

1/16”

––

1/1

1/1

1/1

Circulator Flange Gasket Pair

• SOLD IN PAIRS ONLY

PART NO.

DESCRIPTION

G55005 Circulator flange gasket

CTN/MSTR

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Water Hammer Arresters

• Maximum working temperature: 250°F

• Maximum working pressure: 300 PSI

• Poly bagged

• UPC listed

• Lead free

FIXTURE TYPE OF SUPPLY

CONTROL

Water Closet

Water Closet

Pedestal Urinal

Stall or Wall Unit

Stall or Wall Unit

Lavatory

Bathtub

Shower Head

Flush Valve

Flush Tank

Flush Valve

Flush Valve

Flush Tank

Faucet

Faucet

Mixing Valve

Bathroom Group

Bathroom Group

Flush Valve Closet

Flush Tank Closet

Separate Shower

Service Sink

Laundry Tubs (3)

Mixing Valve

Faucet

Faucet

Combination Fixture Faucet

PUBLIC

TOTAL C.W. H.W

PRIVATE

TOTAL C.W. H.W

--

3

--

--

--

--

10 10 --

5 5 --

10 10 ---

5 5 ---

6

3

--

--

6

3

4

4

3 3 ---

2 1-1/2 1-1/2 1

2

2

3

3

--

1

1

1-1/2

2 1-1/2 1-1/2

2 1 2

--

--

--

--

--

3

--

--

--

--

--

3

--

--

--

--

2

--

3

3

8

6

1

--

3

3

8

6

2

--

3

3

3

3

Now apply the total fi xture units to Table B to obtain your PDI size value.

PDI SIZE ARRESTER: AA

FIXTURE UNITS:

THREAD SIZE:

1-5

1/2

A B C D E F

1-11 12-32 33-60 61-113 114-154 155-330

1/2 3/4

CATALOG NUMBER: ALL A97 SERIES

3/4 1 1 1

MIP AA

PART NO.

A97001

SIZE

1/2”

CTN/MSTR

1/1

M x F AA

M x F AA

M x F AA

MSWT AA

PART NO.

A97002

SIZE

1/2”

CTN/MSTR

1/1

PART NO.

A97012

PART NO.

A97013

PART NO.

A97014

CPVC AA

PART NO.

A97004

PEX TEE AA

PART NO.

A97007

OD TEE AA

PART NO.

A97009

MHT x FHS AA

PART NO.

A97011

SIZE

1/2”

SIZE

1/2”

SIZE

3/8”

SIZE

3/4”

CTN/MSTR

1/1

CTN/MSTR

1/1

CTN/MSTR

1/1

CTN/MSTR

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Water Hammer Arresters

SIZE

1/4”

CTN/MSTR

1/1

SIZE

3/8”

SIZE

5/8”

CTN/MSTR

1/1

CTN/MSTR

1/1

D

169

COMMERCIAL & RESIDENTIAL PLASTICS

Closet Flanges and Accessories ............................................ 174-178

Residential Drains ............................................................... 179-182

LevelBest Drainage and Cleanout System............................... 183-184

Commercial Drains .............................................................. 185-210

Commercial Pipe/Hub Fit Adapter Drains ........................185-191

8-1/2” Pan Commercial Drains .....................................192-198

8-1/2” Commercial Slab Drains ....................................199-205

10” Pan Heavy Duty Commercial Drains .........................206-210

Commercial Drain Bases ...................................................... 211-212

Commercial Spuds and Strainers .......................................... 213-216

General Purpose/Utility Drains ............................................. 217-221

Inside Pipe Fit Drains and Cleanouts ............................................ 222

Residential and Light Commercial Cleanouts .......................... 223-225

Commerical Cleanouts ......................................................... 226-229

Cleanout Spuds ................................................................... 230-231

Floor Sinks and Accessories ................................................. 232-233

Backwater Valves and Accessories ........................................ 234-235

Roof Drains................................................................................ 236

Commercial/Residential Plastic

E

*Published December 2019

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 171

172

JONES STEPHENS

RESIDENTIAL

SHOWER DRAINS

The very definition of versatility.

Plastic components are proudly made in the United States.

Final assembly is completed in our Operational Center of Excellence in Moody, Alabama.

FLEXIBLE

FITS 95% OF ALL SNAP-IN

OR SCREW-IN STRAINERS

ON THE MARKET

MODIFIED

2” GRAY PVC SPUD

HELPS CAMOUFLAGE

DIRT & SOAP SCUM

ADJUSTABLE

REVERSING CLAMPING

RING WHEN ADDITIONAL

HEIGHT IS NEEDED

ADAPTABLE

ENDLESS OPTIONS FOR ALL TYPES OF APPLICATIONS

D50001

The ultimate drain solution.

STYLE

Choose from cast or stamped, round or square, screw-in or snap-in.*

C60809 C6087BN C6083WB

TYPE

Choose from metal or plastic spud with strainer.*

D50980 D60981 D60989

D40005

D60942

C60888 D41101 D50805 C60806

C60818

FINISH

Choose from several finishes to complete the look.

Chrome Plated, Brushed Nickel, Oil Rubbed Bronze,

Old World Bronze, Pearl Nickel, Polished Brass (PVD),

Polished Stainless

*All models have additional finishes available. See Section E in JS Catalog.

173

Closet Flanges & Accessories

Plumbfit Closet Flange

3” Fits Inside 3” Schedule 40 DWV Pipe

3” x 4” Fits Flush with Floor

• Long shank

• 6 screw holes

• Extra-thick flange with short slots for

extra strength

• For 3” units cut pipe 1/8” below floor and remove concrete so unit will fit flush

• 3” has 4 closet bolt slots

E

PVC

PART NO.

C51300

C50300

C51340

C50340

ABS

PART NO.

C51301

C50301

C51341

C50341

DESCRIPTION

3” less knockout

3” with knockout

3” x 4” less knockout

3” x 4” with knockout

DESCRIPTION

3” less knockout

3” with knockout

3” x 4” less knockout

3” x 4” with knockout

CTN/MSTR

1/20

1/20

1/20

1/20

CTN/MSTR

1/20

1/20

1/20

1/20

Plumbfit Closet Flange with Stainless

Steel Ring

3” Fits Inside 3” Schedule 40 DWV Pipe

3” x 4” Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

4” Fits Over 4” Schedule 40 DWV Pipe

• Exclusive 400 grade stainless with plumb fit bodies

• Radial slots for closet bolts; 6 screw holes

• For Schedule 40 DWV pipe

• C57034, C57134, and C57140 are UPC listed

PVC

PART NO.

C57234

C57236

C57134

C57034

C57334

C57040

C57140

ABS

PART NO.

C58234

C58236

C58134

C58034

C58334

C58040

C58140

DESCRIPTION

3” less knockout; 4” long shank

3” less knockout; 6” long shank

3” x 4” less knockout

3” x 4” with knockout

3” x 4” less knockout; 6” long shank

4” with knockout

4” less knockout

DESCRIPTION

3” less knockout; 4” long shank

3” less knockout; 6” long shank

3” x 4” less knockout

3” x 4” with knockout

3” x 4” less knockout; 6” long shank

4” with knockout

4” less knockout

CTN/MSTR

1/20

1/20

1/20

1/20

1/20

1/20

1/20

CTN/MSTR

1/20

1/20

1/20

1/20

1/20

1/20

1/20

Plumbfit Closet Flange

Fits Over 4” Schedule 40 DWV Pipe

• Long shank

• 6 screw holes

• Extra thick flange with short slots for extra strength

PVC

PART NO.

C51400

C50400

ABS

PART NO.

C51401

DESCRIPTION

4” less knockout

4” with knockout

DESCRIPTION

4” less knockout

Plumbfit Closet Flange with Metal Ring

3” x 4” Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

4” Fits Over 4” Schedule 40 DWV Pipe

CTN/MSTR

1/20

1/20

CTN/MSTR

1/20

Closet Flange with Knockout

Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

• Easy to remove knockout comes out in one piece

• 6 screw holes

• 2 radial slots for closet bolts

• Fits flush with floor

• Boxed

• UPC listed

PVC

PART NO.

C50345

ABS

PART NO.

C50346

DESCRIPTION

3” x 4” with knockout

DESCRIPTION

3” x 4” with knockout

CTN/MSTR

1/25

• Adjustable metal ring

• 6 screw holes

• 2 radial slots for closet bolts

CTN/MSTR

1/25

PVC

PART NO.

C53340

C52340

C53400

C52400

ABS

PART NO.

C53341

C52341

C53401

C52401

DESCRIPTION

3” x 4” less knockout

3” x 4” with knockout

4” less knockout

4” with knockout

DESCRIPTION

3” x 4” less knockout

3” x 4” with knockout

4” less knockout

4” with knockout

CTN/MSTR

1/20

1/20

1/20

1/20

CTN/MSTR

1/20

1/20

1/20

1/20

Closet Flange with Metal Ring and Knockout

Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

• Easy to remove knockout comes out in one piece

• 6 screw holes

• 2 radial slots for closet bolts

• Fits flush with floor

• Boxed

• UPC listed

PVC

PART NO.

C52345

ABS

PART NO.

C52346

DESCRIPTION

3” x 4” with knockout

DESCRIPTION

3” x 4” with knockout

CTN/MSTR

1/25

CTN/MSTR

1/25

174

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

3” Closet Flange with Adjustable Ring

Fits Inside 3” Schedule 40 DWV

Closet Flanges & Accessories

Closet Flange with Stainless Steel Ring and Knockout

Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

• Easy to remove knockout comes out in one piece

• 6 screw holes

• 2 radial slots for closet bolts

• Fits flush with floor

• Boxed

• UPC listed

PVC

PART NO.

C57045

ABS

PART NO.

C58045

DESCRIPTION

3” x 4” with knockout

DESCRIPTION

3” x 4” with knockout

DESCRIPTION

3” x 4” with metal ring

3” x 4” with plastic ring

DESCRIPTION

3” x 4” with metal ring

3” x 4” with plastic ring

CTN/MSTR

1/25

CTN/MSTR

1/25

CTN/MSTR

1/10

1/10

CTN/MSTR

1/10

1/10

PVC

PART NO.

C50302

C50306

C50304

C50308

ABS

PART NO.

C50303

C50307

C50305

C50309

• Adjustable swivel rings

• Flush fit

DESCRIPTION

3” with metal ring

3” with plastic ring

3” with metal ring

3” with plastic ring

DESCRIPTION

3” with metal ring

3” with plastic ring

3” with metal ring

3” with plastic ring

BARREL SIZE

4”

4”

6”

6”

BARREL SIZE

4”

4”

6”

6” Spigot Fit Closet Flange

• Extra-thick flange with short slots for extra strength

• 6 screw holes

• Flush fit

PVC

PART NO.

C51350

C51450

ABS

PART NO.

C51351

C51451

PVC

PART NO.

C53600

C53700

ABS

PART NO.

C53601

C53701

DESCRIPTION

3” less knockout

4” less knockout

DESCRIPTION

3” less knockout

4” less knockout

CTN/MSTR

1/20

1/20

CTN/MSTR

1/20

1/20

Plumbfit Closet Flange with Adjustable Ring

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

• 6” long shank

• Can be cut to desired length

• Swivel rings

Plastic Two Finger Flange

• Fits flush

• Patent #: 5,937,450

• Will fit oblong horns

• Pushes easily into 3” or 4” cast iron or

Schedule 40 DWV pipe

• ASTM C-564 rubber gasket

White Plastic

PART NO.

C4733P

C4743P

ABS

PART NO.

C4733A

C4743A

DESCRIPTION

3” x 3” less knockout

4” x 3” less knockout

DESCRIPTION

3” x 3” less knockout

4” x 3” less knockout

CTN/MSTR

1/6

1/6

CTN/MSTR

1/6

1/6

Closet Flange with 3-1/2” Extended

Threads

PVC

PART NO.

C54150

DESCRIPTION with 3-1/2” extended threads

CTN/MSTR

1/20

CTN/MSTR

1/10

1/10

1/10

1/10

CTN/MSTR

1/10

1/10

1/10

1/10

E

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 175

Closet Flanges & Accessories

Plumbfit Closet Flange with Plastic

Swivel Ring

3” x 4” Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

4” Fits Over Schedule 40 DWV Pipe

• Plastic ring will not deteriorate

• 360° rotation

• 2 radial slots and 2 grooved slots for closet bolts

• 6 screw holes for securing to floor

E

PVC

PART NO.

C53342

C54402

C52342

C52402

C53402

ABS

PART NO.

C53343

C54403

C52343

C52403

C53403

45° Closet Flange

Fits Over 3” DWV with a 4” Sweep

• CSA certified

• With plastic swivel ring

• More versatile than an offset closet flange

• Provides unlimited offset when used in conjunction with a socket x socket 45° elbow

PVC

PART NO.

C55043

ABS

PART NO.

C55143

DESCRIPTION

3” x 4” with plastic ring

DESCRIPTION

3” x 4” with plastic ring

CTN/MSTR

1/20

CTN/MSTR

1/20

Offset Plumbfit Closet Flange with

Stainless Steel Ring

Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

PVC

PART NO.

C57434

ABS

PART NO.

C58434

DESCRIPTION

3” x 4” less knockout

3” x 4” offset less knockout

3” x 4” with knockout

4” with knockout

4” less knockout

DESCRIPTION

3” x 4” less knockout

3” x 4” offset less knockout

3” x 4” with knockout

4” with knockout

4” less knockout

• Exclusive 400 grade stainless with plumbfit bodies

• Radial slots for closet bolts; 6 screw holes

• 2” offset

DESCRIPTION

3” x 4” offset less knockout

DESCRIPTION

3” x 4” offset less knockout

CTN/MSTR

1/20

1/20

1/6

1/10

1/10

CTN/MSTR

1/20

1/20

1/20

1/10

1/10

CTN/MSTR

1/20

CTN/MSTR

1/20

Offset Closet Flange

Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

• 2” offset

• 4 closet bolt slots and 2 mounting screw holes

PVC

PART NO.

C54340

ABS

PART NO.

C54341

DESCRIPTION

3” x 4” offset less knockout

DESCRIPTION

3” x 4” offset less knockout

PVC

PART NO.

C51150

C52150

DESCRIPTION

3” less knockout

3” with knockout

CTN/MSTR

1/20

CTN/MSTR

1/20

Offset Closet Flange with Metal Ring

Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

• 2” offset

• Adjustable metal ring

• 2 radial slots for closet bolts

PVC

PART NO.

C54400

ABS

PART NO.

C54401

DESCRIPTION

3” x 4” offset less knockout

DESCRIPTION

3” x 4” offset less knockout

CTN/MSTR

1/20

CTN/MSTR

1/20

4-Way Offset Closet Flange

Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

• 2” offset

• 1-13/16” barrel depth

PVC

PART NO.

C54342

ABS

PART NO.

C54343

DESCRIPTION

3” x 4” offset less knockout

DESCRIPTION

3” x 4” offset less knockout

CTN/MSTR

1/20

CTN/MSTR

1/20

3” Over Schedule 30 Pipe Closet Flange

CTN/MSTR

1/20

1/20

176 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Adjustable Urinal Flange Kit

Spigot Fits Inside Hub of Fitting

Socket Fits Over 2” Schedule 40 DWV Pipe

• 3-1/4” - 7” flange mounting centers

• Kits include bolts, nuts, washers and gasket

Closet Flange Ring

Closet Flanges & Accessories

• Fits over 3” or 4” PVC

• Converts 3” and 4” PVC pipe into a toilet ready application

PVC

F10002

ABS

PART NO.

F11001

F11002

A

2” socket/hub outlet

DESCRIPTION

2” spigot outlet

2” socket/hub outlet

B

1-13/16”

1-1/2”

C

7”

7”

D

1/20

1-11/16”

1/20

CTN/MSTR

1/20

1/20

Radial Fit Urinal Flange Kit

• Permits parallel alignment using radial slots

• Adjusts to 4” to 6” centers

• Socket and spigot connections

• Kit includes bolts, nuts, washers and gasket

PVC

PART NO.

F10003

F10004

ABS

PART NO.

F11003

F11004

DESCRIPTION

2” with socket connection

2” with spigot connection

DESCRIPTION

2” with socket connection

2” with spigot connection

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

Closet Flange Extender

• Stackable to desired height

• For raising floor height when adding ceramic tile or hardwood

PVC

PART NO.

C88001

C88501

DESCRIPTION

1/2” thick

1/4” thick

Waxless Gasket

• Reusable

• Seals closet flange without using wax

CTN/MSTR

1/20

1/20

PVC

PART NO.

C51302

C51402

ABS

PART NO.

C51303

C51403

DESCRIPTION

3” ring

4” ring

DESCRIPTION

3” ring

4” ring

Closet Flange Repair Ring

• Securely attaches to concrete or wood sub-floor

• Replaces most closet rings

• Corrosion resistant

• Mounting ears offset by 1/8” to allow closet bolts to be installed

PART NO. DESCRIPTION

C85000 Closet flange repair ring

Closet Flange Spacer Kit

CTN/MSTR

1/10

1/10

CTN/MSTR

1/10

1/10

CTN/MSTR

20/80

• Reusable toilet seal gasket

• For repair or correction of problems resulting from installation errors or remodeling projects

• Complete kit includes: 2 gaskets, 1/2” spacer,

1/4” x 3-1/2” closet bolt kit, 2 plastic shims

PART NO. DESCRIPTION

C88600 Spacer kit

CTN/MSTR

1/10

Complete Closet Flange Extension Kit with Gaskets

• Useful when overlaying, replacing or tiling bathroom floors

• Two 3-1/2” closet bolts with washers and nuts

• Anchors toilet bolts when closet ring is broken

• No caulking required

• Has built-in gaskets

• One 1/4” flange & one 1/2” flange

PART NO. DESCRIPTION

C88500 Complete kit

C88502 Kit less bolts

CTN/MSTR

1/10

1/10

E

PART NO. DESCRIPTION

C88002 Waxless gasket

CTN/MSTR

1/1

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 177

Closet Flanges & Accessories

Complete Closet Flange Extension Kit with Caulk

Rigid Super Shims

• 200 Rigid super shims packaged in a convenient refillable “candy bowl” counter display

Priced per display

• Three 1/4” extenders for easy adjustment

• Two 3-1/2” closet bolts with washers and nuts

• Adhesive caulk and all hardware included

PART NO. DESCRIPTION

C88500C Complete kit

CTN/MSTR

1/10

PART NO. DESCRIPTION

S55953 200 Rigid super shims

CTN/MSTR

200/200

Closet Flange Extension Kit

E

• No mastic necessary between pieces as with stackable units

• Heavy solid plastic construction

• Two 3-1/2” closet bolts with washers and nuts

• Packaged in display header bag

• One 1/2” flange

PART NO. DESCRIPTION

C88050 1/2” extension kit

CTN/MSTR

1/10

Closet Wedge Shims

• Stackable

• 3/8” width x 1-3/8” length x 5/16” height

• Easily trimmed to desired height

• 100 per bag

Priced per bag or display

PART NO. DESCRIPTION

S55902 100 shims poly bagged

S55903 1000 shims counter display

CTN/MSTR

100/100

1000/1000

Gapper Flange

• Used to repair broken closet flanges

• Individually carded for easy display or bulk

PART NO. DESCRIPTION

C87100 Repair flange

CTN/MSTR

24/240

Flexible and Rigid Super Shims

• Stackable

• Rigid, can be driven

• Flexible, can be trimmed

• 10 per bag

Priced per bag

PART NO. DESCRIPTION

S55950 1-1/8” x 1-15/16” x 1/4” flexible

S55951 1-1/8” x 1-15/16” x 1/4” rigid

CTN/MSTR

10/400

10/400

Flexible Super Shims

• 200 Flexible super shims packaged in a convenient refillable “candy bowl” counter display

Priced per display

PART NO. DESCRIPTION

S55952 200 Flexible super shims

CTN/MSTR

200/200

178

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

PVC and ABS

Residential

Shower/Floor

Drains

Pages 179-182

SIZES: 2”, 2”x 3”

Residential Drains

2” x 3” Shower/Floor Drain

Fits Over 2” or Inside 3” Schedule 40 DWV Pipe

• Low profile for first and second floor installations

ASSEMBLED IN USA

• Beveled edge allows for recessed installation

• Reversible clamping ring for additional 1/2” height adjustment

• Brass inserts ensure secure clamping of membrane

• Dual weeps holes

• Recessed sump area for added drainage

• D50001 UPC Listed

SPUD

• Use D50998 Spud Extension

(listed below) when additional

height is needed

PART NO.

D50120

D50121

D50122

D50123

D50124

ABS

PART NO.

D50301

D50302

D50332

D50333

D50330

D50331

D50311

D50310

D50334

D50335

PVC

PART NO.

D50001

D50002

D50132

D50133

D50130

D50131

D50011

D50010

D50134

D50135

PVC with Primer Tap

STRAINER

4” SS

4” PB

4” PB cast

4” PB cast w/ring

4” NB cast

4” NB cast w/ring

4” CP cast

4” CP cast w/ring

4” CP cast square

4” PB cast square

STRAINER

PT and 4” SS

PT and 4” PB

PT and 4” PB cast

PT and 4” CP cast

PT and 4” CP cast

STRAINER

4” SS

4” PB

4” PB cast

4” PB cast w/ring

4” NB cast

4” NB cast w/ring

4” CP cast

4” CP cast w/ring

4” CP cast square

4” PB cast square

REPL. STRAINER CTN/MSTR

C60809

C60810

C60807

1/20

1/20

1/20

C60807/C60824

C60808

C60808/C60825

C60806

1/20

1/20

1/20

1/20

C60806/C60818

C60812

C60813

1/20

1/20

1/20

E

REPL. STRAINER CTN/MSTR

C60809

C60810

1/1

1/1

C60807

C60806

C60808

1/1

1/1

1/1

REPL. STRAINER CTN/MSTR

C60809

C60810

1/20

1/20

C60807

C60807/C60824

C60808

1/20

1/20

1/20

C60808/C60825

C60806

C60806/C60818

C60812

C60813

1/20

1/20

1/20

1/20

1/20

For use in residential applications.

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 179

Residential Drains

E

2” x 3” Shower/Floor Drain with Test Plug

Fits Over 2” or Inside 3” Schedule 40 DWV Pipe

PVC

PART NO.

D50001TP

D50002TP

D50132TP

D50133TP

D50130TP

D50131TP

D50011TP

D50010TP

D50134TP

D50135TP

D50141TP

D5088BNTP

D5088RBTP

D5088WBTP

D50888TP

D5001BNTP

D5001RBTP

D5001WBTP

ABS

PART NO.

D50301TP

D50302TP

D50332TP

D50333TP

D50330TP

D50331TP

D50311TP

D50310TP

D50334TP

D50335TP

SPUD

STRAINER

4” SS

4” PB

4” PB cast

4” PB cast w/ring

4” NB cast

4” NB cast w/ring

4” CP cast

4” CP cast w/ring

4” CP cast square

4” PB cast square

4” NB square

4” BN square

4” RB square

4” WB square

4” SS square

4” BN round

4” RB round

4” WB round

STRAINER

4” SS

4” PB

4” PB cast

4” PB cast w/ring

24” NB cast

4” NB cast w/ring

4” CP cast

4” CP cast w/ring

4” CP cast square

4” PB cast square

• Use D50998 Spud Extension

(listed below) when additional

height is needed

ASSEMBLED IN USA

• New! Gray spud to camouflage dirt and soap scum

• New! Ability to use a snap-in or screw-in strainer

• Low profile for first and second floor installations

• Beveled edge allows for recessed installation

• Reversible clamping ring for additional 1/2” height adjustment

• Brass inserts ensure secure clamping of membrane

• Dual weeps holes

• Recessed sump area for added drainage

• Use D50998 tailpiece extension when additional height is needed

• Complies with new construction drain test requirements

• Covers both the wet test from the shower, as well as pressure test from above floors

• Before testing, the spud should be threaded down to its lowest point making contact with the plug

• Plug should make complete contact with drain opening

• Remove test plug with pliers and discard

REPL. STRAINER CTN/MSTR

C60809

C60810

C60807

C60807/C60824

C60808

C60808/C60825

C60806

C60806/C60818

C60812

C60813

-

-

-

-

-

-

-

-

1/20

1/20

1/1

1/1

1/1

1/1

1/20

1/1

1/1

1/1

1/20

1/20

1/20

1/20

1/20

1/20

1/20

1/20

REPL. STRAINER CTN/MSTR

C60809

C60810

C60807

C60807/C60824

C60808

C60808/C60825

C60806

C60806/C60818

C60812

C60813

1/20

1/20

1/20

1/20

1/20

1/20

1/20

1/20

1/20

1/20

Brass Drain Extension

• 2” MIP x 2” FIP for 2” drain spuds

• Use when additional height is required to overcome inconsistent concrete pours

• Height extension from 1-1/2” to 3-1/2”

• Solid brass construction

PART NO.

D60978

DESCRIPTION

Brass drain extension

CTN/MSTR

1/1

PVC

PART NO.

D50101

D50111

D50102

D50800

D50802

D50161

D50152

D5001BN

D5001RB

D5001WB

D5001NP

ABS

PART NO.

D50401

D50411

D50402

D50830

D50832

D50162

D50153

2” x 3” Shower/Floor Drain with Brass Tailpiece

Fits Over 2” or Inside 3” Schedule 40 DWV Pipe ASSEMBLED IN USA

• Low profile for first and second floor installations

• Beveled edge allows for recessed installation

• Reversible clamping ring for additional 1/2” height adjustment

• Brass inserts ensure secure clamping of membrane

• Dual weeps holes

• Recessed sump area for added drainage

A B C D

Over 2” pipe 4-1/4” 6-1/2” 3-1/4” – 4-3/8”

Inside 3” pipe 4-1/4” 6-1/2” 3-1/4” – 4-3/8”

STRAINER

4” SS round

4” CP round

4” PB round

6” CP round

6” PB round

4” CP square

4” PB square

4” BN round

4” RB round

4” WB round

4” NP round

STRAINER

4” SS round

4” CP round

4” PB round

6” CP round

6” PB round

4” CP square

4” PB square

REPL. STRAINER

D60780

D60781

D60782

C60812

C60813

-

-

-

-

REPL. STRAINER

D60780

D60781

D60782

C60812

C60813

CTN/MSTR

1/20

1/20

1/20

1/20

1/20

1/20

1/20

1/1

1/1

1/1

1/1

CTN/MSTR

1/20

1/20

1/20

1/20

1/20

1/20

1/20

2” x 3” Shower/Floor Drain with Square Strainer

Fits Over 2” or Inside 3” Schedule 40 DWV Pipe

• Low profile for first and second floor installations

ASSEMBLED IN USA

• Beveled edge allows for recessed installation

• Reversible clamping ring for additional 1/2” height adjustment

• Brass inserts ensure secure clamping of membrane

• Dual weeps holes

• Recessed sump area for added drainage

SPUD

• Use D50998 Spud Extension

(listed below) when additional

height is needed

PART NO.

D50998

180

Tailpiece Extension

• Use when additional height is needed

• Compensates for thick shower bases

ASSEMBLED IN USA

DESCRIPTION

1” - 2” tailpiece extension

CTN/MSTR

1/1

PVC

PART NO.

D50141

STRAINER

4” NB square

CTN/MSTR

1/20

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Residential Drains

2” x 3” Shower/Floor Drain with 2” Spud and 4” Square Snap-in Strainer

PART NO.

D5088BN

D5088RB

D5088WB

D50888

• No screws

• Four prong installation

• Plastic spud

STRAINER

4” BN square

4” RB square

4” WB square

4” SS square

2” x 3” “Perfect Low Profile”

Shower/Floor Drain

Fits Over 2” or Inside 3” PVC Schedule 40 DWV Pipe

CTN/MSTR

1/1

1/1

1/1

1/1

ASSEMBLED IN USA

• 3” total height; perfect for multiple stories

• Reversible clamping ring, stainless steel strainer

A

4-1/4”

PVC

PART NO.

D50PLP

D50PL1

D50125

D50126

B

MIN: 3” - MAX: 4-1/4”

C

3/8”

D

2”

STRAINER

4” SS round

4-1/4” SS square

PT and 4” SS round

PT and 4” NB round cast

E F

ID: 2-3/8” OD: 3-1/16” 6-5/8”

CTN/MSTR

1/20

1/20

1/1

1/1

2” Shower/Floor Drain with Brass Tailpiece

Fits Over 2” Schedule 40 DWV Pipe

ASSEMBLED IN USA

2” x 3” Shower/Floor Drain with Brass Tailpiece and Test Plug

Fits Over 2” or Inside 3” Schedule 40 DWV Pipe ASSEMBLED IN USA

• Low profile for first and second floor installations

• Beveled edge allows for recessed installation

• Reversible clamping ring for additional 1/2” height adjustment

• Brass inserts ensure secure clamping of membrane

• Dual weeps holes

• Recessed sump area for added drainage

A B C D

Over 2” pipe 4-1/4” 6-1/2” 3-1/4” – 4-3/8”

Inside 3” pipe 4-1/4” 6-1/2” 3-1/4” – 4-3/8”

PVC

PART NO.

D50101TP

D50111TP

D50102TP

D50800TP

D50802TP

D50161TP

D50152TP

STRAINER

4” SS round

4” CP round

4” PB round

6” CP round

6” PB round

4” CP square

4” PB square

D50942TP 4-1/4” CP square

D5094BNTP 4-1/4” BN square

D5094RBTP 4-1/4” RB square

D5094WBTP 4-1/4” WB square

ABS

REPL. STRAINER

D60780

D60781

D60782

C60812

C60813

CTN/MSTR

1/20

1/20

1/20

1/20

1/20

1/20

1/20

1/1

1/1

1/1

1/1

PART NO.

D50401TP

D50411TP

D50402TP

D50830TP

D50832TP

D50162TP

D50153TP

STRAINER

4” SS round

4” CP round

4” PB round

6” CP round

6” PB round

4” CP square

4” PB square

Fits Over 2” Schedule 40 DWV Pipe

REPL. STRAINER

D60780

D60781

D60782

C60812

C60813

CTN/MSTR

1/20

1/20

1/20

1/20

1/20

1/20

1/20

2” Shower/Floor Drain with Plastic Tailpiece

ASSEMBLED IN USA

E

•Coverall top

• Plastic tailpiece

• Screw-down clamping ring has weep holes for secondary drainage

• Coverall top

• Brass tailpiece

• Screw-down clamping ring has weep holes for secondary drainage

PVC

PART NO.

D50710

D50712

D50711

D50721

D50720

ABS

PART NO.

D50713

D50715

D50714

D50723

D50722

STRAINER

4” SS round

4” PB round

4” CP round

6” PB round

6” CP round

STRAINER

4” SS round

4” PB round

4” CP round

6” PB round

6” CP round

CTN/MSTR

1/10

1/10

1/10

1/10

1/10

CTN/MSTR

1/10

1/10

1/10

1/10

1/10

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

PVC

PART NO.

D50700

D50702

D50708

D50709

D50701

D50706

D50707

ABS

PART NO.

D50703

D50705

D50726

D50727

D50704

D50724

D50725

STRAINER

4” SS round

4” PB round

4” PB round cast

4” PB round with ring

4” CP round

4” NB round

4” NB round with ring

STRAINER

4” SS round

4” PB round

4” PB round cast

4” PB round with ring

4” CP round

4” NB round

4” NB round with ring

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

CTN/MSTR

1/10

1/10

1/10

1/10

1/10

1/10

1/10

CTN/MSTR

1/10

1/10

1/10

1/10

1/10

1/10

1/10

181

Residential Drains

2” No Caulk Shower/Floor Drain

Pushes Over 2” DWV Pipe

ASSEMBLED IN USA

2” Drop-In Shower Stall Drain

Fits Over 2” Schedule 40 DWV Pipe

E

PVC - PLASTIC TAILPIECE

PART NO.

D50500

D50510

PVC - BRASS TAILPIECE

PART NO.

D50501

D50502

D50511

A

2” no caulk

• Coverall top

• Tongue-and-grooved beveled clamping ring

• Brass inserts

• Supplied with gasket

B

4-1/4”

C

6-1/2”

D

3-1/2” – 4-3/4”

STRAINER

4” SS round

4” CP round

STRAINER

4” SS round

4” PB round

4” CP round

CTN/MSTR

1/10

1/10

CTN/MSTR

1/10

1/10

1/10

A

2”

• Drain body drops through shower base

• Locknut tightens from underside

• Snap-in strainer

• D40010 is UPC listed

B

4-1/4”

C

2-5/8”

PVC

PART NO.

DESCRIPTION

D41007 Solvent outlet

D41009

D41008

Solvent outlet

No-caulk/solvent outlet

ABS

PART NO.

DESCRIPTION

D41307

D41105

Solvent outlet

Solvent outlet

Snap-In Replacement Strainers

PART NO.

DESCRIPTION

D40005 SS for solvent outlet drains

D41103

D41104

D40010

D40003

SS for no caulk/solvent drains

PB Snap-in for D41008

SN

PB

STRAINER

4” SS

4” PB

4” SS

STRAINER

4” SS

4” PB

CTN/MSTR

1/25

1/20

1/20

CTN/MSTR

1/25

1/20

CTN/MSTR

1/10

1/10

1/10

1/10

1/10

2” No Caulk Shower Stall Drain

Fits Over 2” Schedule 40 DWV Pipe

• Coverall top

• Snap-in strainer

• Wrench included

• For 2” CTS order gasket separately

• D40140, D40101, D40401, D40010 and

D40151 are UPC Listed 2” Shower Stall Drain with Receptor Base

Fits Over 2” Schedule 40 DWV Pipe

A

2”

B

4-1/4”

Plastic Body

PART NO.

D40101

D40151

D40201

D40401

Brass Body

STRAINER

4” SS round

4” White plastic round

4” PB round

4” White epoxy coated SS round

PART NO.

D40140

D40240

D40440

STRAINER

4” SS round

4” PB round

4” White epoxy coated SS round

Snap-In Replacement Strainers

PART NO.

DESCRIPTION

D40005

D40003

D40004

SS round strainer for solvent outlet drains

PB round replacement strainer

White epoxy coated SS replacement strainer

D40006

D40007

D40008

D40009

D40010

Replacement wrench key

2” Schedule 40 DWV gasket

2” CTS replacement gasket

White plastic round replacement strainer

SN replacement strainer

C

2”

CTN/MSTR

1/20

1/20

1/25

1/10

CTN/MSTR

1/20

1/36

1/10

CTN/MSTR

1/1

1/50

1/50

1/1

1/1

1/1

1/1

1/20

A

2”

• Allows for secondary drainage

• Accepts knockout test cap for testing

• 3” OD threads

B

4-1/4”

C

2”

PVC

PART NO.

D41001

D41002

D41003

D41004

ABS

STRAINER

4” SS round

4” PB round

4” AB round

4” SN round

PART NO.

D41301

D41302

D41303

PVC - 2” Offset

PART NO.

D41600

ABS - 2” Offset

STRAINER

4” SS round

4” PB round

4” AB round

STRAINER

4” SS round

PART NO.

D41601

Replacement Strainers with Screws

STRAINER

4” SS round

PART NO.

D41101

D41102

D41107

DESCRIPTION

SS round replacement strainer with screws

PB round replacement strainer with screws

SN round replacement strainer with screws

CTN/MSTR

1/25

1/20

1/20

1/20

CTN/MSTR

1/20

1/20

1/20

CTN/MSTR

1/25

CTN/MSTR

1/25

CTN/MSTR

50/250

50/250

50/250

182

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

PVC

LevelBest

Drainage and

Cleanout

System

Pages 183-184

LevelBest Drains & Cleanouts

Adapter

Allows adjustment to floor level after concrete is poured!

• PVC, ABS or Cast Iron drains compatible

• Industry standard iron pipe size threads compatible with most adapter and drain bodies

• Compatible with most plastic and brass spuds used in the industry

• Includes the spacer ring that can be used with brass spuds

• Can be used with tile rings

PART NO. DESCRIPTION

D50448 3-1/2” x 3” x 6”

D50449 4” x 3-1/2” x 6”

D50450 4” x 3-1/2” x 5

D50451 3-1/2” x 3” x 5”

D50452 Replacement cap

D50453 Replacement ring

D50454 Leveling shim for 5” strainer

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

3” x 4” PVC Base with 3-1/2” Adapter

Allows adjustment to floor level after concrete is poured!

• PVC, ABS or Cast Iron drains compatible

• Industry standard iron pipe size threads compatible with most adapter and drain bodies

• Includes the spacer ring that can be used with brass spuds

• Can be used with tile rings

• Primer tapped with 1/2” IPS plug

E

SIZES: 2”x 3”, 3”, 3”x 4”, 4”

PART NO. DESCRIPTION

D50440 3” x 4” PVC base with 3-1/2” LevelBest adapter

CTN/MSTR

1/1

Adapter with Spud and Strainer

Allows adjustment to floor level after concrete is poured!

• PVC, ABS or Cast Iron drains compatible

• Industry standard iron pipe size threads compatible with most adapter and drain bodies

• Includes the spacer ring that can be used with brass spuds

• Can be used with tile rings

For use in applications where adjustments after the concrete pour are required.

PART NO.

D50522

D50523

D50520

D50521

D50524

D50526

SIZE

3-1/2”

3-1/2”

4”

4”

3-1/2”

4”

SPUD

3” Plastic

3” Metal

3-1/2” Plastic

3-1/2” Metal

3-1/2” Plastic

3-1/2” Plastic

STRAINER

5” NB round

5” NB round

5” NB round

5” NB round

6” NB round

6” NB round

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

Adapter with Spud and Cleanout

Allows adjustment to floor level after concrete is poured!

• PVC, ABS or Cast Iron drains compatible

• Industry standard iron pipe size threads compatible with most adapter and drain bodies

• Includes the spacer ring that can be used with brass spuds

• Can be used with tile rings

PART NO. PIPE SIZE

D50525 3-1/2”

SPUD

3” Plastic

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

COVER

6” NB round

CTN/MSTR

1/1

183

LevelBest Drains & Cleanouts

Complete Pipe Fit Drain System

Allows adjustment to floor level after concrete is poured!

Complete Hub Fit Cleanout System

Allows adjustment to floor level after concrete is poured!

• Includes the spacer ring that can be used with brass spuds

• Can be used with tile rings

• Primer tapped with 1/2” IPS plug

• Includes the spacer ring that can be used with brass spuds

• Can be used with tile rings

E

PART NO.

PIPE SIZE

D50460

D50461

3” x 4”

3” x 4”

D50473

D50486

D50469

D50472

D50470

3” x 4”

3” x 4”

3” x 4”

4”

D50471

D50465

D50464

D50474

4”

4”

4”

4”

4”

SPUD

3” Plastic

3” Metal

3” Plastic

3-1/2” Plastic

3” Plastic

3-1/2” Plastic

3-1/2” Plastic

3-1/2” Metal

3” Metal

3” Plastic

3” Plastic

STRAINER CTN/MSTR

5” NB round

5” NB round

1/1

1/1

6” NB round

5” NB round

6” NB square

6” NB round

1/1

1/1

1/1

1/1

5” NB round

5” NB round

5” NB round

5” NB round

6” NB round

1/1

1/1

1/1

1/1

1/1

Complete Pipe Fit Cleanout System

Allows adjustment to floor level after concrete is poured!

• Includes the spacer ring that can be used with brass spuds

• Can be used with tile rings

PART NO.

PIPE SIZE

C59240 4”

C59241 4”

SPUD

3” Plastic

3” Metal

COVER

5” NB round

5” NB round

Complete Heavy Duty Drain System

Allows adjustment to floor level after concrete is poured!

CTN/MSTR

1/1

1/1

• Includes the spacer ring that can be used with brass spuds

• Can be used with tile rings

• Completely adjustable; reversible clamping ring gains additional 1” height

• 8-1/2” Pan primer tapped with 1/2” plug

• Extra weep holes

PART NO.

PIPE SIZE

D49640 4”

D49641

D49646

4”

4”

D49647

D49644

D49645

D49650

D49651

4”

2” x 3”

2” x 3”

2” x 3”

D49642

D49643

D49648

D49649

D50477

D50479

2” x 3”

3” x 4”

3” x 4”

3” x 4”

3” x 4”

3”

4”

SPUD

3” Plastic

3” Metal

3” Plastic

3” Metal

3-1/2” Metal

3” Plastic

STRAINER CTN/MSTR

5” NB round

5” NB round

3-1/2” Plastic 5” NB round

3-1/2” Metal 5” NB round

5” NB round

5” NB round

3-1/2” Plastic 5” NB round

5” NB round

5” NB round

3” Metal 5” NB round

3-1/2” Plastic 5” NB round

3-1/2” Metal 5” NB round

3-1/2” Plastic 6” NB round

3-1/2” Plastic 6” NB round

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

PART NO.

PIPE SIZE

C59242

C59252

3” x 4”

3” x 4”

D50481

C59244

C59245

C59250

C59251

D50482

D50480

3” x 4”

4”

4”

4”

4”

4”

4”

SPUD

3” Plastic

3-1/2” Plastic

3” Plastic

3” Plastic

3” Metal

3-1/2” Plastic

3-1/2” Metal

3” Plastic

3-1/2” Plastic

COVER

5” NB round

5” NB round

6” NB round

5” NB round

5” NB round

5” NB round

5” NB round

6” NB round

6” NB round

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Complete Heavy Duty Slab Drain System

Allows adjustment to floor level after concrete is poured!

Complete Hub Fit Drain System

Allows adjustment to floor level after concrete is poured!

• Includes the spacer ring that can be used with brass spuds

• Can be used with tile rings

• 8-1/2” Pan for applications where no clamping ring is required

• Primer tapped with 1/2” plug

PART NO.

PIPE SIZE

D50462 4”

D50463 4”

184

• Includes the spacer ring that can be used with brass spuds

• Can be used with tile rings

SPUD

3” Plastic

3” Metal

STRAINER CTN/MSTR

5” NB round 1/1

5” NB round 1/1

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

PART NO.

PIPE SIZE

D49656 2” x 3”

D49657

D49662

2” x 3”

2” x 3”

D49663

D49654

D49655

D49660

2” x 3”

3” x 4”

3” x 4”

3” x 4”

D49661

D49652

D49653

D49658

D49659

3” x 4”

4”

4”

4”

4”

SPUD

3” Plastic

3” Metal

3-1/2” Plastic

3-1/2” Metal

3” Plastic

3” Metal

3-1/2” Plastic

3-1/2” Metal

3” Plastic

3” Metal

3-1/2” Plastic

3-1/2” Metal

STRAINER CTN/MSTR

5” NB round

5” NB round

5” NB round

1/1

1/1

1/1

5” NB round

5” NB round

5” NB round

5” NB round

1/1

1/1

1/1

1/1

5” NB round

5” NB round

5” NB round

5” NB round

5” NB round

1/1

1/1

1/1

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Assembled Commercial Drains

3”x 4” Pipe Fit Base with 3-1/2” Plastic Spud

Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

PVC and ABS

Commercial

Pipe/Hub Fit

Adapter Drains

Pages 185-191

SIZES: 2”, 3”, 3”x 4”, 4”

For use in applications where a membrane is not required.

STRAINER

5” round

5” round with ring

6” round

6” round with ring

6” square

7” square

PVC

PART NO.

D53428

D53429

D53430

D53431

D53432

D53433

D53434

D53020

D53022

D53074

D53072

D53076

D53021

D53284

D59900

ABS

PART NO.

D53435

D53436

D53437

D53438

D53439

D53440

D53441

D53023

D53025

D53075

D53073

D53077

D53024

D53285

D53249

• Strainers available in SS, PB, NB and CP

• SS strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Primer tapped, includes 1/2” plug

• Adjustable (see dimension D)

A B C

Over 3” pipe Inside 4” pipe 4-1/2”

Over 3” pipe Inside 4” pipe 4-1/2”

Over 3” pipe Inside 4” pipe 4-1/2”

Over 3” pipe Inside 4” pipe 4-1/2”

Over 3” pipe Inside 4” pipe 4-1/2”

Over 3” pipe Inside 4” pipe 4-1/2”

D

5-1/16” ---- 7-1/8”

5-13/16” ---- 7-1/4”

5-3/4” ---- 7-1/4”

6-1/16” ---- 7-5/16”

5-3/4” ---- 7-1/8”

5-15/16” ---- 7-3/8”

E

5-3/16”

5-1/2”

6-1/8”

6-1/2”

6”

7”

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

5” NB round with 6” square top

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

5” NB round with 7” square top

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

E

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 185

Assembled Commercial Drains

3”x 4” Pipe Fit Base with 3-1/2” Metal Spud

Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

2” Over Pipe Fit Base with 2” Plastic Spud

Fits Over 2” Schedule 40 DWV Pipe

ASSEMBLED IN USA

• Strainers are available in PB, NB and CP

• Strainers are 3/16” thick

• Primer tapped, includes 1/2” plug

• Adjustable (see dimension D)

STRAINER

5” round

6” round

A B

Over 3” pipe Inside 4” pipe

Over 3” pipe Inside 4” pipe

8” round

9” round

Over 3” pipe

Over 3” pipe

Inside 4” pipe

Inside 4” pipe

5” or 6” square top Over 3” pipe Inside 4” pipe

C

4-1/2”

4-1/2”

4-1/2”

4-1/2”

4-1/2”

D

4-7/8” ---- 6-1/16”

5-5/16” ---- 6-11/16”

5-3/8” ---- 6-7/8”

5-3/8” ---- 6-7/8”

5-3/4” ---- 7-1/8”

E

8”

9”

5”

6”

5” or 6”

E

PVC

PART NO.

D53027

D53124

D53026

D53029

D53125

D53028

D53031

D53138

D53142

D53140

D53078

D53082

D53080

D53084

ABS

PART NO.

D53033

D53126

D53032

D53035

D53127

D53034

D53037

D53139

D53143

D53141

D53079

D53083

D53081

D53085

STRAINER

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

8” PB round

8” NB round

9” PB round

9” NB round

5” PB square

5” NB square

6” PB square

6” NB square

STRAINER

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

8” PB round

8” NB round

9” PB round

9” NB round

5” PB square

5” NB square

6” PB square

6” NB square

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

4” round

4” round with ring

4” square

PVC

PART NO.

D53190

D53194

D53196

D53200

D53198

D53202

D53325

D53192

D53290

D53298

D53296

ABS

PART NO.

D53191

D53195

D53197

D53201

D53199

D53203

D53193

D53291

D53299

D53297

A

Over 2” pipe

Over 2” pipe

Over 2” pipe

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Adjustable (see dimension D)

B

4-1/4”

4-1/4”

4-1/4”

C

1-3/4”

1-3/4”

1-3/4”

D

3-3/8” ---- 3-13/16”

3-1/2” ---- 3-7/8”

3-3/16” ---- 3-11/16”

STRAINER

4” SS round

4” PB round stamped

4” PB round cast

4” PB round with ring

4” NB round

4” NB round with ring

4” NB round with ring and 1/2” PT

4” CP round

4” CP round with ring

4” PB square

4” CP square

STRAINER

4” SS round

4” PB round stamped

4” PB round cast

4” PB round with ring

4” NB round

4” NB round with ring

4” CP round

4” CP round with ring

4” PB square

4” CP square

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

186 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

2” Over Pipe Fit Base with 2” Metal Spud

Fits Over 2” Schedule 40 DWV Pipe

ASSEMBLED IN USA

Assembled Commercial Drains

3” Over Pipe Fit Base with 3” Plastic Spud

Fits Over 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

4” round

6” round

PVC

PART NO.

D53204

D53208

D53206

D53218

D53216

ABS

PART NO.

D53205

D53209

D53207

D53219

D53217

A

Over 2” pipe

Over 2” pipe

• Strainers are available in SS, PB and CP

• Stainless steel strainers are 1/16” thick

• PB and CP strainers are 3/16” thick

• Adjustable (see dimension D)

B

4-1/4”

6”

C

1-3/4”

1-3/4”

D

3-1/8” ---- 3-5/8”

3-1/8” ---- 3-5/8”

STRAINER

4” SS round

4” PB round

4” CP round

6” PB round

6” CP round

STRAINER

4” SS round

4” PB round

4” CP round

6” PB round

6” CP round

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

STRAINER

6” round

6” round with ring

7” square

PVC

PART NO.

D53100

D53104

D53108

D53106

D53110

D53102

D53288

D53260

ABS

PART NO.

D53101

D53105

D53109

D53107

D53111

D53103

D53289

D53261

A

Over 3” pipe

Over 3” pipe

Over 3” pipe

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Primer tapped, includes 1/2” plug

• Adjustable (see dimension D)

B

6-1/8”

6-1/2”

7”

C

3-7/8”

3-7/8”

3-7/8”

D

4-13/16” ---- 5-3/4”

4-15/16” ---- 5-13/16”

4-13/16” ---- 6-1/8”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

5” NB round with 7” square top

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

5” NB round with 7” square top

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

E

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

3” Over Pipe Fit Base with 3” Metal Spud

Fits Over 3” Schedule 40 DWV Pipe

ASSEMBLED IN

USA

STRAINER

5” round

PVC

PART NO.

D53312

D53306

ABS

PART NO.

D53313

D53307

A

Over 3” pipe

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Primer tapped, includes 1/2” plug

• Adjustable (see dimension D)

B

5”

C

3-7/8”

D

4-15/16” ---- 5-3/4”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 187

E

STRAINER

5” round

5” round with ring

6” round

6” round with ring

7” square

PVC

PART NO.

D53414

D53415

D53416

D53417

D53418

D53419

D53420

D53040

D53088

D53086

D53090

D53041

D53282

D53252

ABS

PART NO.

D53421

D53422

D53423

D53424

D53425

D53426

D53427

D53043

D53045

D53089

D53087

D53091

D53044

D53283

D53253

Assembled Commercial Drains

4” Over Pipe Fit Base with 3-1/2” Plastic Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

4” Over Pipe Fit Base with 3-1/2” Metal Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

A

Over 4” pipe

Over 4” pipe

Over 4” pipe

Over 4” pipe

Over 4” pipe

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Primer tapped, includes 1/2” plug

• Adjustable (see dimension D)

B

5-3/16”

5-1/2”

6-1/8”

6-1/2”

7”

C

4-3/4”

4-3/4”

4-3/4”

4-3/4”

4-3/4”

D

6” ---- 7-3/8”

6-1/8” ---- 7-1/2”

6” ---- 7-1/2”

6-1/4” ---- 7-5/8”

5-1/2” ---- 6-7/8”

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

5” NB round with 7” square top

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

5” NB round with 7” square top

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

5” round

6” round

8” round

9” round

5” or 6” square

PVC

PART NO.

D53047

D53128

D53046

D53049

D53129

D53048

D53051

D53132

D53136

D53134

D53092

D53096

D53094

D53098

ABS

PART NO.

D53053

D53130

D53052

D53055

D53131

D53054

D53057

D53133

D53137

D53135

D53093

D53097

D53095

D53099

A

Over 4” pipe

Over 4” pipe

Over 4” pipe

Over 4” pipe

Over 4” pipe

• Strainers are available in PB, NB and CP

• Strainers are 3/16” thick

• Primer tapped, includes 1/2” plug

• Adjustable (see dimension D)

B

5-3/16”

6-3/16”

8”

9”

5” or 6”

C

4-3/4”

4-3/4”

4-3/4”

4-3/4”

4-3/4”

D

5-1/8” ---- 6-3/8”

5-5/16” ---- 6-5/8”

5-1/2” ---- 7”

5-1/2” ---- 7-1/8”

5-5/16” ---- 6-5/8”

STRAINER

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

8” PB round

8” NB round

9” PB round

9” NB round

5” PB square

5” NB square

6” PB square

6” NB square

STRAINER

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

8” PB round

8” NB round

9” PB round

9” NB round

5” PB square

5” NB square

6” PB square

6” NB square

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

188 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

4” Over Pipe Fit Base with 4” Plastic Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

Assembled Commercial Drains

3” Inside Pipe Fit Base with 2” Plastic Spud

Fits Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

6” round

6” round with ring

7” square

PVC

PART NO.

D53262

D53263

D53264

D53265

D53266

D53269

D53286

D53268

ABS

PART NO.

D53272

D53273

D53274

D53275

D53276

D53279

D53287

D53278

A

Over 4” pipe

Over 4” pipe

Over 4” pipe

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Primer tapped, includes 1/2” plug

• Adjustable (see dimension D)

B

6-1/8”

6-1/2”

7”

C

4-3/4”

4-3/4”

4-3/4”

D

6” ---- 7-3/16”

6-1/8” ---- 7-5/16”

6-1/16” ---- 7-3/8”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

5” NB round with 7” square top

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

5” NB round with 7” square top

4” Over Pipe Fit Base with 4” Metal Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

CTN/MSTR

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/1

CTN/MSTR

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/1

STRAINER

4” round

4” round with ring

4” square

PVC

PART NO.

D53150

D53154

D53156

D53160

D53158

D53162

D53152

D53294

D53300

D53302

ABS

PART NO.

D53151

D53155

D53157

D53161

D53159

D53163

D53153

D53295

D53301

D53303

A

Inside 3” pipe

Inside 3” pipe

Inside 3” pipe

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Adjustable (see dimension C)

B

4-1/4”

4-1/2”

4-1/4”

C

2-5/8” ---- 3-7/8”

2-11/16” ---- 4”

2-1/2” ---- 3-13/16”

STRAINER

4” SS round

4” PB round stamped

4” PB round cast

4” PB round with ring

4” NB round

4” NB round with ring

4” CP round

4” CP round with ring

4” CP square

4” PB square

STRAINER

4” SS round

4” PB round stamped

4” PB round cast

4” PB round with ring

4” NB round

4” NB round with ring

4” CP round

4” CP round with ring

4” CP square

4” PB square

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

E

STRAINER

5” round

PVC

PART NO.

D53308

D53304

ABS

PART NO.

D53309

D53305

A

Over 4” pipe

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Primer tapped, includes 1/2” plug

• Adjustable (see dimension D)

B

5”

C

4-3/4”

D

6-1/16” ---- 7-3/8”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/4

1/4

CTN/MSTR

1/4

1/4

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 189

Assembled Commercial Drains

3” Inside Pipe Fit Base with 2” Metal Spud

Fits Inside 3” Schedule 40 DWV Pipe

4” Inside Pipe Fit Base with 3” Metal Spud

Fits Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

4” or 6” round

E

PVC

PART NO.

D53180

D53184

D53182

D53188

D53186

ABS

PART NO.

D53181

D53185

D53183

D53189

D53187

A

Inside 3” pipe

• Strainers are available in SS, PB and CP

• Stainless steel strainers are 1/16” thick

• PB and CP strainers are 3/16” thick

• Adjustable (see dimension C)

B

4-1/4” or 6”

C

2-7/16” ---- 3-3/4”

STRAINER

4” SS round

4” PB round

4” CP round

6” PB round

6” CP round

STRAINER

4” SS round

4” PB round

4” CP round

6” PB round

6” CP round

4” Inside Pipe Fit Base with 3” Plastic Spud

Fits Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

STRAINER

5” round

PVC

PART NO.

D53314

D53310

ABS

PART NO.

D53315

D53311

A

Inside 4” pipe

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Adjustable (see dimension C)

B

5”

C

2-5/8” ---- 3-1/2”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

STRAINER

6” round

6” round with ring

PVC

PART NO.

D53230

D53232

D53238

D53234

D53240

D53236

D53292

ABS

PART NO.

D53231

D53233

D53239

D53235

D53241

D53237

D53293

190

A

Inside 4” pipe

Inside 4” pipe

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Adjustable (see dimension C)

B

6-1/8”

6-1/2”

C

3-13/16” ---- 4-5/8”

4” ---- 4-13/16”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

4” Hub Fit Base with 3-1/2” Plastic Spud

Fits Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

Assembled Commercial Drains

4” Hub Fit Base with 3-1/2” Metal Spud

Fits Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

5” round

5” round with ring

6” round

6” round with ring

PVC

PART NO.

D53400

D53401

D53402

D53403

D53404

D53405

D53406

D53017

D53001

D53060

D53058

D53062

D53003

D53280

ABS

PART NO.

D53407

D53408

D53409

D53410

D53411

D53412

D53413

D53018

D53002

D53061

D53059

D53063

D53004

D53281

A

4” hub fi t

4” hub fi t

4” hub fi t

4” hub fi t

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Adjustable (see dimension C)

B

5-3/16”

5-1/2”

6-1/8”

6-1/2”

C

3” ---- 4-1/2”

3-1/8” ---- 4-5/8”

3-1/16” ---- 4-11/16”

3-1/4” ---- 4-3/4”

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

5” round

6” round

5” or 6” square

PVC

PART NO.

D53005

D53120

D53011

D53006

D53121

D53012

D53064

D53068

D53066

D53070

ABS

PART NO.

D53008

D53122

D53014

D53009

D53123

D53015

D53065

D53069

D53067

D53071

A

5” hub fi t

6” hub fi t

4” hub fi t

• Strainers are available in PB, NB and CP

• Strainers are 3/16” thick

• Adjustable (see dimension C)

B

5-3/16”

6-3/16”

5” or 6”

C

2-3/8” ---- 3-5/8”

2-5/8” ---- 4”

2-3/4” ---- 4-3/16”

STRAINER

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

5” PB square

5” NB square

6” PB square

6” NB square

STRAINER

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

5” PB square

5” NB square

6” PB square

6” NB square

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/4

1/4

1/4

1/4

E

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/4

1/4

1/4

1/4

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 191

Assembled Commercial Drains

E

2” x 3” Drain Base with 3” Plastic Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

PVC and ABS

8-1/2” Pan

Commercial

Drains

Pages 192-198

SIZES: 2”x 3”, 3”x 4”, 4”

STRAINER

6” round stainless steel

6” round

6” with ring

PVC

PART NO.

D49001

D49003

D49005

D49007

D49009

D49011

D49013

ABS

PART NO.

D49002

D49004

D49006

D49008

D49010

D49012

D49014

A

Over 2” Inside 3”

Over 2” Inside 3”

Over 2” Inside 3”

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

B C D E

6-1/8” 8-9/16” 5-1/16” ---- 6-3/16” 3-3/4”

6-1/8” 8-9/16” 5-1/8” ---- 6-3/8” 3-3/4”

6-7/16” 8-9/16” 5-5/16” ---- 6-3/16” 3-3/4”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

2” x 3” Drain Base with 3” Metal Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

For use in applications where a membrane is required.

STRAINER

5” round

PVC

PART NO.

D49019

D49021

ABS

PART NO.

D49020

D49022

A

Over 2” Inside 3”

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

B C D

5-3/16” 8-9/16” 4-3/16” ---- 5-3/8”

E

3-3/4”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

192 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

2” x 3” Drain Base with 3-1/2” Plastic Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

Assembled Commercial Drains

2” x 3” Drain Base with 3-1/2” Metal Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

5” round stainless steel

5” round

5” round with ring

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49023

D49025

D49027

D49029

D49031

D49033

D49035

D49037

D49039

D49041

D49043

D49045

D49047

D49049

ABS

PART NO.

D49024

D49026

D49028

D49030

D49032

D49034

D49036

D49038

D49040

D49042

D49044

D49046

D49048

D49050

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

A

Over 2” Inside 3”

Over 2” Inside 3”

B C

5-1/4” 8-9/16”

5-1/4” 8-9/16”

D

4-5/8” ---- 6-1/8”

4-11/16” ---- 6-1/4”

Over 2” Inside 3” 5-9/16” 8-9/16” 4-3/4” ---- 6-5/16”

E

3-3/4”

3-3/4”

3-3/4”

Over 2” Inside 3”

Over 2” Inside 3”

6-1/4” 8-9/16” 4-13/16” ---- 6-1/4”

6-1/4” 8-9/16” 4-15/16” ---- 6-5/16”

Over 2” Inside 3” 6-9/16” 8-9/16” 5-1/16” ---- 6-1/2”

3-3/4”

3-3/4”

3-3/4”

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

4” round

5” round

6” round

PVC

PART NO.

D49051

D49053

D49055

D49057

D49059

D49061

D49063

D49065

ABS

PART NO.

D49052

D49054

D49056

D49058

D49060

D49062

D49064

D49066

A

Over 2” Inside 3”

Over 2” Inside 3”

Over 2” Inside 3”

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in PB, NB and CP

• Strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

B C D

4-1/8” 8-9/16” 4-1/8” ---- 5-1/4”

5-3/16” 8-9/16” 4-1/8” ---- 5-5/16”

6-3/16” 8-9/16” 4-5/16” ---- 5-3/4”

E

3-3/4”

3-3/4”

3-3/4”

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

E

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 193

Assembled Commercial Drains

2” x 3” Drain Base with 4” Plastic Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

3” x 4” Drain Base with 3” Plastic Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

6” round stainless steel

6” round

E

PVC

PART NO.

D49077

D49079

D49081

D49083

D49085

D49087

D49089

ABS

PART NO.

D49078

D49080

D49082

D49084

D49086

D49088

D49090

A

Over 2” Inside 3”

Over 2” Inside 3”

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

B C D

6-3/16” 8-9/16” 5” ---- 6-3/16”

6-3/16” 8-9/16” 5-1/16” ---- 6-1/4”

E

3-3/4”

3-3/4”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49101

D49103

D49105

D49107

D49109

D49111

D49113

ABS

PART NO.

D49102

D49104

D49106

D49108

D49110

D49112

D49114

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

A B C D E

Over 3” Inside 4” 6-1/8” 8-9/16” 5-1/16” ---- 6-3/16” 5-3/16”

Over 3” Inside 4” 6-1/8” 8-9/16” 5-1/8” ---- 6-3/8” 5-3/16”

Over 3” Inside 4” 6-7/16” 8-9/16” 5-5/16” ---- 6-1/2” 5-3/16”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

2” x 3” Drain Base with 4” Metal Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

3” x 4” Drain Base with 3” Metal Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

5” round

PVC

PART NO.

D49095

D49097

ABS

PART NO.

D49096

D49098

A

Over 2” Inside 3”

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

B C D

5-3/16” 8-9/16” 4-1/8” ---- 5-3/16”

E

3-3/4”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

STRAINER

5” round

PVC

PART NO.

D49119

D49121

ABS

PART NO.

D49120

D49122

A

Over 3” Inside 4”

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

B C D E

5-3/16” 8-9/16” 4-3/16” ---- 5-3/8” 5-3/16”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

194 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

3” x 4” Drain Base with 3-1/2” Plastic Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

Assembled Commercial Drains

3” x 4” Drain Base with 3-1/2” Metal Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

5” round stainless steel

5” round

5” round with ring

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49123

D49125

D49127

D49129

D49131

D49133

D49135

D49137

D49139

D49141

D49143

D49145

D49147

D49149

ABS

PART NO.

D49124

D49126

D49128

D49130

D49132

D49134

D49136

D49138

D49140

D49142

D49144

D49146

D49148

D49150

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

A

Over 3” Inside 4”

B C D

5-1/4” 8-9/16” 4-5/8” ---- 6-1/8”

E

5-1/4”

Over 3” Inside 4” 5-1/4” 8-9/16” 4-11/16” ---- 6-1/4” 5-1/4”

Over 3” Inside 4” 5-9/16” 8-9/16” 4-3/4” ---- 6-5/16”

Over 3” Inside 4”

5-1/4”

6-1/4” 8-9/16” 4-13/16” ---- 6-1/4” 5-1/4”

Over 3” Inside 4” 6-1/4” 8-9/16” 4-15/16” ---- 6-5/16” 5-1/4”

Over 3” Inside 4” 6-9/16” 8-9/16” 5-1/16” ---- 6-1/2” 5-1/4”

STRAINER

4” round

5” round

6” round

PVC

PART NO.

D49151

D49153

D49155

D49157

D49159

D49161

D49163

D49165

ABS

PART NO.

D49152

D49154

D49156

D49158

D49160

D49162

D49164

D49166

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

A

Over 3” Inside 4”

Over 3” Inside 4”

Over 3” Inside 4”

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in PB, NB and CP

• Strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

B C D

4-1/8” 8-9/16” 4-1/8” ---- 5-1/4”

5-3/16” 8-9/16” 4-1/8” ---- 5-5/16”

6-3/16” 8-9/16” 4-5/16” ---- 5-3/4”

E

5-1/4”

5-1/4”

5-1/4”

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

E

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 195

Assembled Commercial Drains

3” x 4” Drain Base with 4” Plastic Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

4” Drain Base with 3” Plastic Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

6” round stainless steel

6” round

6” round with ring

E

PVC

PART NO.

D49177

D49179

D49181

D49183

D49185

D49187

D49189

ABS

PART NO.

D49178

D49180

D49182

D49184

D49186

D49188

D49190

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

A B C D E

Over 3” Inside 4” 6-3/16” 8-9/16” 5-1/16” ---- 6-3/16” 5-1/4”

Over 3” Inside 4” 6-3/16” 8-9/16” 5-1/8” ---- 6-3/8” 5-1/4”

Over 3” Inside 4” 6-7/16” 8-9/16” 5-5/16” ---- 6-1/2” 5-1/4”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

PVC

PART NO.

D49201

D49203

D49205

D49207

D49209

D49211

D49213

ABS

PART NO.

D49202

D49204

D49206

D49208

D49210

D49212

D49214

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

STRAINER A

6” round stainless steel Over 4”

6” round

6” round with ring

B

6-1/8”

C

8-9/16”

Over 4” 6-1/8” 8-9/16”

Over 4” 6-7/16” 8-9/16”

D

5-9/16” ---- 6-11/16”

5-5/8” ---- 6-7/8”

5-13/16” ---- 7”

E

4-1/4”

4-1/4”

4-1/4”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

3” x 4” Drain Base with 4” Metal Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

4” Drain Base with 3” Metal Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN

USA

STRAINER

5” round

PVC

PART NO.

D49195

D49197

ABS

PART NO.

D49196

D49198

A

Over 3” Inside 4”

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

B C D

5-3/16” 8-9/16” 4-3/16” ---- 5-3/8”

E

5-1/4”

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

STRAINER

5” round

PVC

PART NO.

D49219

D49221

ABS

PART NO.

D49220

D49222

A

Over 4”

B

5-3/16”

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

C

8-9/16”

D

4-11/16” ---- 5-7/8”

E

4-1/4”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

196 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

4” Drain Base with 3-1/2” Plastic Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

Assembled Commercial Drains

4” Drain Base with 3-1/2” Metal Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

5” round stainless steel

5” round

5” round with ring

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49223

D49225

D49227

D49229

D49231

D49233

D49235

D49237

D49239

D49241

D49243

D49245

D49247

D49249

ABS

PART NO.

D49224

D49226

D49228

D49230

D49232

D49234

D49236

D49238

D49240

D49242

D49244

D49246

D49248

D49250

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

A B

Over 4” 5-1/4”

C

8-9/16”

Over 4” 5-1/4” 8-9/16”

Over 4” 5-9/16” 8-9/16”

Over 4” 6-1/4”

Over 4” 6-1/4”

8-9/16”

8-9/16”

Over 4” 6-9/16” 8-9/16”

D

5-1/8” ---- 6-5/8”

5-3/16” ---- 6-3/4”

5-1/4” ---- 6-13/16”

5-5/16” ---- 6-3/4”

5-7/16” ---- 6-13/16”

5-9/16” ---- 7”

E

4-1/4”

4-1/4”

4-1/4”

4-1/4”

4-1/4”

4-1/4”

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

4” round

5” round

6” round

PVC

PART NO.

D49251

D49253

D49255

D49257

D49259

D49261

D49263

D49265

ABS

PART NO.

D49252

D49254

D49256

D49258

D49260

D49262

D49264

D49266

A

Over 4”

Over 4”

Over 4”

B

4-1/8”

5-3/16”

6-3/16”

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in PB, NB and CP

• Strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

C

8-9/16”

8-9/16”

8-9/16”

D

4-5/8” ---- 5-3/4”

4-5/8” ---- 5-13/16”

4-13/16” ---- 6-1/4”

E

4-1/4”

4-1/4”

4-1/4”

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

E

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 197

Assembled Commercial Drains

4” Drain Base with 4” Plastic Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

6” round stainless steel

6” round

6” round with ring

E

PVC

PART NO.

D49277

D49279

D49281

D49283

D49285

D49287

D49289

ABS

PART NO.

D49278

D49280

D49282

D49284

D49286

D49288

D49290

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

A B C

Over 4” 6-3/16” 8-9/16”

Over 4” 6-3/16” 8-9/16”

Over 4” 6-7/16” 8-9/16”

D

5-1/2” ---- 6-11/16”

5-9/16” ---- 6-3/4”

5-3/4” ---- 7”

E

4-1/4”

4-1/4”

4-1/4”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

4” Drain Base with 4” Metal Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

5” round

PVC

PART NO.

D49295

D49297

ABS

PART NO.

D49296

D49298

A

Over 4”

• Completely adjustable; reversible clamping ring gains additional 1” height (Dimension D)

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• 8-1/2” pan primer tapped with 1/2” plug

• Gray PVC or Black ABS

• Extra weep holes

B C D E

5-3/16” 8-9/16” 4-5/8” ---- 5-11/16” 4-1/4”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

198 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Assembled Commercial Drains

2” x 3” Slab Drain Base with 3” Plastic Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

PVC and ABS

8-1/2” Pan

Commercial

Slab Drains

Pages 199-205

SIZES: 2”x 3”, 3”x 4”, 4”

STRAINER

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49301

D49303

D49305

D49307

D49309

D49311

D49313

ABS

PART NO.

D49302

D49304

D49306

D49308

D49310

D49312

D49314

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

A

Over 2” Inside 3”

Over 2” Inside 3”

B C D

6-1/8” 8-9/16” 4-15/16” ---- 5-7/8”

6-1/8” 8-9/16” 5” ---- 6”

Over 2” Inside 3” 6-7/16” 8-9/16” 5-1/8” ---- 6-1/8”

E

3-3/4”

3-3/4”

3-3/4”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

E

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

2”x 3” Slab Drain Base with 3” Metal Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

For use in applications where a membrane is not required.

STRAINER

5” round

PVC

PART NO.

D49319

D49321

ABS

PART NO.

D49320

D49322

A

Over 2” Inside 3”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C D E

5-3/16” 8-9/16” 3-15/16” ---- 4-15/16” 3-3/4”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 199

Assembled Commercial Drains

2”x 3” Slab Drain Base with 3-1/2” Plastic Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

2”x 3” Slab Drain Base with 3-1/2” Metal Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

E

STRAINER

5” round stainless steel

5” round

5” round with ring

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49323

D49325

D49327

D49329

D49331

D49333

D49335

D49337

D49339

D49341

D49343

D49345

D49349

ABS

PART NO.

D49324

D49326

D49328

D49330

D49332

D49334

D49336

D49338

D49340

D49342

D49344

D49346

D49348

D49350

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

A B C D

Over 2” Inside 3” 5-1/4” 8-9/16” 4-3/4” ---- 6-1/16”

Over 2” Inside 3” 5-1/4” 8-9/16” 5” ---- 5-15/16”

Over 2” Inside 3” 5-9/16” 8-9/16” 5-1/8” ---- 6-1/8”

Over 2” Inside 3” 6-1/4” 8-9/16”

Over 2” Inside 3” 6-1/4” 8-9/16”

5” ---- 6-1/16”

5-1/8” ---- 6”

Over 2” Inside 3” 6-9/16” 8-9/16” 5-1/4” ---- 6-1/4”

E

3-3/4”

3-3/4”

3-3/4”

3-3/4”

3-3/4”

3-3/4”

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round with ring

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

4” round

5” round

6” round

PVC

PART NO.

D49351

D49353

D49355

D49357

D49359

D49361

D49363

D49365

ABS

PART NO.

D49352

D49354

D49356

D49358

D49360

D49362

D49364

D49366

A

Over 2” Inside 3”

Over 2” Inside 3”

Over 2” Inside 3”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in PB, NB and CP

• Strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C

4-1/8” 8-9/16”

D

48” ---- 4-15/16”

5-3/16” 8-9/16” 4” ---- 5”

6-3/16” 8-9/16” 4-7/16” ---- 5-1/2”

E

3-3/4”

3-3/4”

3-3/4”

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

200 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

2”x 3” Slab Drain Base with 4” Plastic Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

Assembled Commercial Drains

3”x 4” Slab Drain Base with 3” Plastic Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49377

D49379

D49381

D49383

D49385

D49387

D49389

ABS

PART NO.

D49378

D49380

D49382

D49384

D49386

D49388

D49390

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

A B C

Over 2” Inside 3” 6-3/16” 8-9/16”

D

5” ---- 5-15/16”

E

3-3/4”

Over 2” Inside 3” 6-3/16” 8-9/16” 5” ---- 6” 3-3/4”

Over 2” Inside 3” 6-7/16” 8-9/16” 5-3/16” ---- 6-3/16” 3-3/4”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

2”x 3” Slab Drain Base with 4” Metal Spud

Fits Over 2” and Inside 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49401

D49403

D49405

D49407

D49411

D49413

ABS

PART NO.

D49402

D49404

D49406

D49408

D49410

D49412

D49414

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

A B C D E

Over 3” Inside 4” 6-1/8” 8-9/16” 5-1/16” ---- 6-1/16” 3-3/4”

Over 3” Inside 4” 6-1/8” 8-9/16” 5-1/8” ---- 6-3/16”

Over 3” Inside 4” 6-7/16” 8-9/16” 5-5/16” ---- 6-3/8”

3-3/4”

3-3/4”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

3”x 4” Slab Drain Base with 3” Metal Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN

USA

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

E

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

5” round

PVC

PART NO.

D49395

D49397

ABS

PART NO.

D49396

D49398

A

Over 2” Inside 3”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C D

5-3/16” 8-9/16” 3-7/8” ---- 4-7/8`”

E

3-3/4”

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

5” round

PVC

PART NO.

D49419

D49421

ABS

PART NO.

D49420

D49422

A

Over 3” Inside 4”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C

5-3/16” 8-9/16”

D

4-1/8” ---- 5-1/8”

E

3-3/4”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 201

Assembled Commercial Drains

3”x 4” Slab Drain Base with 3-1/2” Plastic Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

3”x 4” Slab Drain Base with 3-1/2” Metal Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

E

STRAINER

5” round stainless steel

5” round

5” round with ring

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49423

D49425

D49427

D49429

D49431

D49433

D49435

D49437

D49439

D49441

D49443

D49445

D49447

D49449

ABS

PART NO.

D49424

D49426

D49428

D49430

D49432

D49434

D49436

D49438

D49440

D49442

D49444

D49446

D49448

D49450

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

A B C

Over 3” Inside 4” 5-1/4” 8-9/16”

D

5” ---- 6-1/8”

E

3-3/4”

Over 3” Inside 4” 5-1/4” 8-9/16” 5-3/16” ---- 6-3/16” 3-3/4”

Over 3” Inside 4” 5-9/16” 8-9/16” 5-3/8” ---- 6-5/16” 3-3/4”

Over 3” Inside 4” 6-1/4” 8-9/16” 5-1/16” ---- 6-1/16” 3-3/4”

Over 3” Inside 4” 6-1/4” 8-9/16” 5-3/16” ---- 6-3/16” 3-3/4”

Over 3” Inside 4” 6-9/16” 8-9/16” 5-5/16” ---- 6-3/8” 3-3/4”

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

4” round

5” round

6” round

8” round

9” round

PVC

PART NO.

D49451

D49453

D49455

D49457

D49459

D49461

D49463

D49465

D49467

D49469

D49473

D49475

ABS

PART NO.

D49452

D49454

D49456

D49458

D49460

D49462

D49464

D49466

D49468

D49470

D49474

D49476

A

Over 3” Inside 4”

Over 3” Inside 4”

Over 3” Inside 4”

Over 3” Inside 4”

Over 3” Inside 4”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in PB, NB and CP

• Strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C D E

4-1/8” 8-9/16” 4-1/8” ---- 5-1/16” 3-15/16”

5-3/16” 8-9/16” 4-1/8” ---- 5-1/4” 3-15/16”

6-3/16” 8-9/16” 4-9/16” ---- 5-7/16” 3-15/16”

8-1/8” 8-9/16” 5-1/16” ---- 6” 3-15/16”

9” 8-9/16” 5” ---- 6-1/8” 3-15/16”

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

8” PB round

8” NB round

9” PB round

9” NB round

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

8” PB round

8” NB round

9” PB round

9” NB round

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

202 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

3”x 4” Slab Drain Base with 4” Plastic Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

Assembled Commercial Drains

4” Slab Drain Base with 3” Plastic Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49477

D49479

D49481

D49483

D49485

D49487

D49489

ABS

PART NO.

D49478

D49480

D49482

D49484

D49486

D49488

D49490

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

A B C D E

Over 3” Inside 4” 6-3/16” 8-9/16” 5-1/16” ---- 6-1/8” 3-15/16”

Over 3” Inside 4” 6-3/16” 8-9/16” 5-1/4” ---- 6-3/16” 3-15/16”

Over 3” Inside 4” 6-7/16” 8-9/16” 5-3/8” ---- 6-5/16” 3-15/16”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

3”x 4” Slab Drain Base with 4” Metal Spud

Fits Over 3” and Inside 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49501

D49503

D49505

D49507

D49509

D49511

D49513

ABS

PART NO.

D49502

D49504

D49506

D49508

D49510

D49512

D49514

A

Over 4”

Over 4”

Over 4”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C D E

6-1/8” 8-9/16” 5-5/16” ---- 6-3/8” 4-3/16”

6-1/8” 8-9/16” 5-3/8” ---- 6-5/16” 4-3/16”

6-7/16” 8-9/16” 5-1/8” ---- 6-9/16” 4-3/16”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

E

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

4” Slab Drain Base with 3” Metal Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

5” round

PVC

PART NO.

D49495

D49497

ABS

PART NO.

D49496

D49498

A

Over 3” Inside 4”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C

5-3/16” 8-9/16”

D

4” ---- 5-1/8”

E

3-15/16”

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

STRAINER

5” round

PVC

PART NO.

D49519

D49521

ABS

PART NO.

D49520

D49522

A

Over 4”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C D E

5-3/16” 8-9/16” 4-5/16” ---- 5-3/8” 4-3/16”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 203

Assembled Commercial Drains

4” Slab Drain Base with 3-1/2” Plastic Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

4” Slab Drain Base with 3-1/2” Metal Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

E

STRAINER

5” round stainless steel

5” round

5” round with ring

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49523

D49525

D49527

D49529

D49531

D49533

D49535

D49537

D49539

D49541

D49543

D49545

D49547

D49549

ABS

PART NO.

D49524

D49526

D49528

D49530

D49532

D49534

D49536

D49538

D49540

D49542

D49544

D49546

D49548

D49550

A

Over 4”

Over 4”

Over 4”

Over 4”

Over 4”

Over 4”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C D E

5-1/4” 8-9/16” 5-1/4” ---- 6-7/16” 4-3/16”

5-1/4” 8-9/16” 5-3/8” ---- 6-7/16” 4-3/16”

5-9/16” 8-9/16” 5-9/16” ---- 6-5/8” 4-3/16”

6-1/4” 8-9/16” 5-3/8” ---- 6-7/16” 4-3/16”

6-1/4” 8-9/16” 5-7/16” ---- 6-7/16” 4-3/16”

6-9/16” 8-9/16” 5-1/2” ---- 6-5/8” 4-3/16”

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

4” round

5” round

6” round

PVC

PART NO.

D49551

D49553

D49555

D49557

D49559

D49561

D49563

D49565

ABS

PART NO.

D49552

D49554

D49556

D49558

D49560

D49562

D49564

D49566

A

Over 4”

Over 4”

Over 4”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in PB, NB and CP

• Strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C D E

4-1/8” 8-9/16” 4-7/16” ---- 5-7/16” 4-3/16”

5-3/16” 8-9/16” 4-5/16” ---- 5-7/16” 4-3/16”

6-3/16” 8-9/16” 4-13/16” ---- 5-13/16” 4-3/16”

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

STRAINER

4” PB round

4” NB round

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

204 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Assembled Commercial Drains

4” Slab Drain Base with 4” Plastic Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

6” round stainless steel

6” round

6” round with ring

PVC

PART NO.

D49577

D49579

D49581

D49583

D49585

D49587

D49589

ABS

PART NO.

D49578

D49580

D49582

D49584

D49586

D49588

D49590

A

Over 4”

Over 4”

Over 4”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C D E

6-3/16” 8-9/16” 5-3/8” ---- 6-3/8” 4-3/16”

6-3/16” 8-9/16” 5-7/16” ---- 6-7/16” 4-3/16”

6-7/16” 8-9/16” 5-5/8” ---- 6-9/16” 4-3/16”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

4” Slab Drain Base with 4” Metal Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

5” round

PVC

PART NO.

D49595

D49597

ABS

PART NO.

D49596

D49598

A

Over 4”

• Completely adjustable (See Dimension D)

• 8-1/2” pan for applications where no clamping ring is required

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

B C D E

5-3/16” 8-9/16” 4-1/4” ---- 5-5/16” 4-3/16”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

E

205

Assembled Commercial Drains

E

PVC and ABS

10” Pan

Commercial

Drains

Pages 206-210

SIZES: 2”, 3”, 4”

STRAINER

5” round

5” round with ring

6” round

6” round with ring

PVC

PART NO.

D53442

D53443

D53444

D53445

D53446

D53447

D53448

D50037

D50044

D50050

D50047

D50053

D50278

ABS

PART NO.

D53449

D53450

D53451

D53452

D53453

D53454

D53455

D51037

D51044

D51050

D51047

D51053

D51040

D51278

2” Heavy Duty Drain Base with 3-1/2” Plastic Spud

Fits Over 2” Schedule 40 DWV Pipe

A

Over 2”

Over 2”

Over 2”

Over 2”

ASSEMBLED IN USA

• 10” Pan

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

5-3/16”

5-1/2”

6-1/8”

6-1/2”

C

11”

11”

11”

11”

D

4-3/8” ---- 6”

4-1/2” ---- 6-1/8”

4-7/16” ---- 6-1/16”

4-1/2” ---- 6-1/4”

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round with ring

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

For use in applications where a membrane is required.

206 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

STRAINER

5” or 6” round

5” or 6” square

PVC

PART NO.

D50027

D50060

D50022

D50028

D50063

D50023

D50066

D50072

D50069

D50075

ABS

PART NO.

D51027

D51060

D51022

D51028

D51063

D51023

D51066

D51072

D51069

D51075

2” Heavy Duty Drain Base with 3-1/2” Metal Spud

Fits Over 2” Schedule 40 DWV Pipe

A

Over 2”

Over 2”

• 10” Pan

• Strainers are available in PB, NB and CP

• PB, NB and CP strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

5” or 6”

5” or 6”

C

11”

11”

D

4-1/4” ---- 5-5/8”

4-1/4” ---- 5-5/8”

STRAINER

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

5” PB square

5” NB square

6” PB square

6” NB square

STRAINER

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

5” PB square

5” NB square

6” PB square

6” NB square

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

ASSEMBLED IN USA

Assembled Commercial Drains

2” Heavy Duty Drain Base with 4” Plastic Spud

Fits Over 2” Schedule 40 DWV Pipe

ASSEMBLED IN USA

STRAINER

6” round

6” round with ring

PVC

PART NO.

D50340

D50341

D50342

D50343

D50345

D50346

ABS

PART NO.

D51340

D51341

D51342

D51343

D51344

D51345

D51346

A

Over 2”

Over 2”

• 10” Pan

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

6-1/8”

6-1/2”

C

11”

11”

D

4-7/16” ---- 6-1/16”

4-1/2” ---- 6-1/4”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

2” Heavy Duty Drain Base with 4” Metal Spud

Fits Over 2” Schedule 40 DWV Pipe

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

E

ASSEMBLED IN USA

STRAINER

5” round

PVC

PART NO.

D50349

D50350

ABS

PART NO.

D51349

D51350

A

Over 2”

• 10” Pan

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

5”

C

11”

D

4-1/4” ---- 5-5/8”

STRAINER

5” NB round

5” PB round

STRAINER

5” NB round

5” PB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 207

Assembled Commercial Drains

3” Heavy Duty Drain Base with 3-1/2” Plastic Spud

Fits Over 3” Schedule 40 DWV Pipe

A

Over 3”

Over 3”

Over 3”

Over 3”

ASSEMBLED IN USA

• 10” Pan

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

5-3/16”

5-1/2”

6-1/8”

6-1/2”

C

11”

11”

11”

11”

D

4-3/8” ---- 6”

4-1/2” ---- 6-1/8”

4-11/16” ---- 6-7/16”

4-3/4” ---- 6-1/2”

STRAINER

5” round

5” round with ring

6” round

6” round with ring

E

PVC

PART NO.

D53457

D53458

D53459

D53460

D53461

D53462

D50038

D50045

D50051

D50048

D50054

D50041

D50279

ABS

PART NO.

D53463

D53464

D53465

D53466

D53467

D53468

D53469

D51038

D51045

D51051

D51048

D51054

D51041

D51279

STRAINER

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

3” Heavy Duty Drain Base with 3-1/2” Metal Spud

Fits Over 3” Schedule 40 DWV Pipe

STRAINER

5”, 6”, 8” or 9” round

5” or 6” square

PVC

PART NO.

D50012

D50061

D50013

D50064

D50005

D50014

D53144

D53148

D53146

D50067

D50073

D50070

D50076

ABS

PART NO.

D51012

D51061

D51004

D51013

D51064

D51005

D51014

D53145

D53149

D53147

D51067

D51073

D51070

D51076

ASSEMBLED IN USA

A

Over 3”

Over 3”

• 10” Pan

• Strainers are available in PB, NB and CP

• Strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

5”, 6”, 8” or 9”

5”or 6”

C

11”

11”

D

5” ---- 6-1/2”

5” ---- 6-1/2”

STRAINER

5” PB round

5” NB round

5” CP round

6” PB round

6” NB round

6” CP round

8” PB round

8” NB round

9” PB round

9” NB round

5” PB square

5” NB square

6” PB square

6” NB square

STRAINER

5” PB round

5” NB round

6” PB round

6” NB round

6” CP round

8” PB round

8” NB round

9” PB round

9” NB round

5” PB square

5” NB square

6” PB square

6” NB square

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

208

Items marked with the Jones Stephens logo are “You Need It...We Got It” Items.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

STRAINER

6” round

6” round with ring

PVC

PART NO.

D50351

D50352

D50353

D50354

ABS

PART NO.

D51351

D51352

D51353

D51354

D51355

D51356

D51357

3” Heavy Duty Drain Base with 4” Plastic Spud

Fits Over 3” Schedule 40 DWV Pipe

ASSEMBLED IN USA

A

Over 3”

Over 3”

• 10” Pan

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

6-1/8”

6-1/2”

C D

4-5/8” ---- 6” 4-11/16” ---- 6-7/16”

4-5/8” ---- 6” 4-3/4” ---- 6-1/2”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

3” Heavy Duty Drain Base with 4” Metal Spud

Fits Over 3” Schedule 40 DWV Pipe

STRAINER

5” round

PVC

PART NO.

D50361

D50360

ABS

PART NO.

D51361

D51360

A

Over 3”

• 10” Pan

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

5”

C

4-5/8” ---- 6”

D

5” ---- 6-1/2”

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

ASSEMBLED IN USA

STRAINER

5” round

5” round with ring

6” round

6” round with ring

PVC

PART NO.

D53470

D53471

D53472

D53473

D53474

D53475

D53476

D50039

D50046

D50052

D50049

D50280

ABS

PART NO.

D53477

D53478

D53479

D53480

D53481

D53482

D53483

D51039

D51046

D51052

D51049

D51055

D51042

D51280

Assembled Commercial Drains

4” Heavy Duty Drain Base with 3-1/2” Plastic Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

A

Over 4”

Over 4”

Over 4”

Over 4”

• 10” Pan

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

5-3/16”

5-1/2”

6-1/8”

6-1/2”

C

11”

11”

11”

11”

D

4-3/8” ---- 6”

4-1/2” ---- 6-1/8”

5-1/16” ---- 6-13/16”

5-1/4” ---- 6-15/16”

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” CP round with ring

STRAINER

5” SS round

5” PB round

5” PB round with ring

5” NB round

5” NB round with ring

5” CP round

5” CP round with ring

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

E

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com 209

E

STRAINER

5” or 6” round

5” or 6” square

PVC

PART NO.

D50062

D50015

D50065

D50016

D50008

D50068

D50074

D50071

D50077

ABS

PART NO.

D51062

D51015

D51007

D51065

D51016

D51008

D51068

D51074

D51071

D51077

Assembled Commercial Drains

4” Heavy Duty Drain Base with 3-1/2” Metal Spud

Fits Over 4” Schedule 40 DWV Pipe

A

Over 4”

Over 4”

• 10” Pan

• Strainers are available in PB, NB and CP

• Strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

5”or 6”

5”or 6”

C

11”

11”

D

4-5/8” ---- 5-7/8”

4-5/8” ---- 5-7/8”

STRAINER

5” NB round

5” PB round

6” NB round

6” PB round

6” CP round

5” PB square

5” NB square

6” PB square

6” NB square

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

STRAINER

5” NB round

5” PB round

5” CP round

6” NB round

6” PB round

6” CP round

5” PB square

5” NB square

6” PB square

6” NB square

ASSEMBLED IN USA

STRAINER

6” round

6” round with ring

PVC

PART NO.

D50362

D50363

D50364

D50365

D50366

D50367

D50368

ABS

PART NO.

D51362

D51363

D51364

D51365

D51366

D51367

D51368

4” Heavy Duty Drain Base with 4” Plastic Spud

Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

A

Over 4”

Over 4”

• 10” Pan

• Strainers are available in SS, PB, NB and CP

• Stainless steel strainers are 1/16” thick

• PB, NB and CP strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

6-1/8”

6-1/2”

C

11”

11”

D

5-1/16” ---- 6-13/16”

5-1/4” ---- 6-15/16”

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

STRAINER

6” SS round

6” PB round

6” PB round with ring

6” NB round

6” NB round with ring

6” CP round

6” CP round with ring

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

4” Heavy Duty Drain Base with 4” Metal Spud

Fits Over 4” Schedule 40 DWV Pipe

A

Over 4”

ASSEMBLED IN USA

• 10” Pan

• Strainers are available in PB and NB

• Strainers are 3/16” thick

• Primer tapped with 1/2” plug

• Adjustable (see dimension D)

B

5”

C

11”

D

4-5/8” ---- 5-7/8”

STRAINER

5” round

PVC

PART NO.

D50372

D50371

ABS

PART NO.

D51372

D51371

STRAINER

5” PB round

5” NB round

STRAINER

5” PB round

5” NB round

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

210 Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

Commercial Drain Bases

Pipe Fit Base

2” Fits Over 2” Schedule 40 DWV Pipe

3” Fits Over 3” Schedule 40 DWV Pipe

3” x 4” Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

4” Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

PVC and ABS

Commercial

Drain

Components

Pages 211-216

SIZES: 2”, 2”x 3”, 3”, 3-1/2”,

3”x 4”, 4”

PVC

PART NO.

D52120

D52012

D52450

D52400

D52451

D52005

D52452

D52014

D52453

ABS

PART NO.

D52112

D52016

D52460

D52500

D52461

D52105

D52462

D52017

D52463

PIPE SIZE

2” with PT

2”

3” x 4” with PT

3” x 4”

3” x 4” with PT

4”

4” with PT

4”

4” with PT

PIPE SIZE

2”

3”

3” x 4” with PT

3” x 4”

3” x 4”with PT

4”

4” with PT

4”

4” with PT

SPUD SIZE

2”

3”

3”

3-1/2”

3-1/2”

3-1/2”

3-1/2”

4”

4”

SPUD

2”

2”

3”

3-1/2”

3-1/2”

3-1/2”

3-1/2”

4”

4”

CTN/MSTR

1/20

1/20

1/10

1/10

1/10

1/10

1/10

1/10

1/10

E

CTN/MSTR

1/20

1/10

1/10

1/10

1/10

1/10

1/10

1/10

1/10

Inside Pipe Fit Base

3” Fits Over 3” Schedule 40 DWV Pipe

4” Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

PVC

PART NO.

D52023

D52004

ABS

PART NO.

D52123

D52104

PIPE SIZE

3”

4”

PIPE SIZE

3”

4”

For use in commercial applications.

Jones Stephens | Phone 1-800-355-6637 | Fax 1-800-462-6991 | www.jonesstephens.com

SPUD

2”

3”

SPUD

2”

3”

CTN/MSTR

1/1

1/1

CTN/MSTR

1/1

1/1

211

Commercial Drain Bases

Hub Fit Base

Fits Inside 4” Hub Schedule 40 DWV Pipe

E

PVC

PART NO.

D52003

ABS

PART NO.

D52103

212

PIPE SIZE

4”

PIPE SIZE

4”

SPUD

3-1/2”

SPUD

3-1/2”

ASSEMBLED IN USA

CTN/MSTR

1/1

CTN/MSTR

1/1

Heavy Duty Base with Clamping Ring

2” x 3” Fits Over 2” or Inside 3” Schedule 40 DWV Pipe

3” x 4” Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

4” Fits Over 4” Schedule 40 DWV Pipe

ASSEMBLED IN USA

PVC

PART NO.

D49800

D49801

D49802

D49803

D49804

D49805

D49806

D49807

D49808

ABS

PART NO.

D49810

D49811

D49812

D49813

D49814

D49815

D49816

D49817

D49818

PIPE SIZE

2” x 3”

2” x 3”

2” x 3”

3” x 4”

3” x 4”

3” x 4”

4”

4”

4”

PIPE SIZE

2” x 3”

2” x 3”

2” x 3”

3” x 4”

3” x 4”

3” x 4”

4”

4”

4”

• Completely adjustable; reversible clamping ring gains additional 1” height

• 8-1/2” Pan

• Extra weep holes

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

SPUD

3”

3-1/2”

4”

3”

3-1/2”

4”

3”

3-1/2”

4”

SPUD

3”

3-1/2”

4”

3”

3-1/2”

4”

3”

3-1/2”

4”

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

CTN/MSTR

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

1/1

PVC

PART NO.

D52202

D52205

D52203

D52204

D52207

D52216

D52217

ABS

PART NO.

D52302

D52305

D52303

D52306

D52304

D52307

D52316

D52317

Slab Drain Base

2” x 3” Fits Over 2” or Inside 3” Schedule 40 DWV Pipe

3” x 4” Fits Over 3” or Inside 4” Schedule 40 DWV Pipe

4” Fits Over 4” Schedule 40 DWV Pipe

• Completely adjustable

• 8-1/2” Pan for applications where no clamping ring is required

• Spud threads directly into base

• Primer tapped with 1/2” plug

• Gray PVC or Black ABS

PVC

PART NO.

D49850

D49851

D49852

D49853

D49854

D49855

D49856

D49857

D49858

ABS

PIPE SIZE

2” x 3”

2” x 3”

2” x 3”

3” x 4”

3” x 4”

3” x 4”

4”

4”

4”

SPUD

3”

3-1/2”