Advertisement
Advertisement
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 1
Golf Irrigation
Specification Catalog 2019
3/6/19 1:19 PM
Our purpose is to help our customers enrich the beauty, productivity and sustainability of the land. This is our legacy, our purpose, our commitment to both the customers we serve and the generations to come.
The fastest, most comprehensive system health check available.
———————
ANOTHER TORO EXCLUSIVE
3/6/19 1:19 PM 19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 2
You measure rainfall to the one hundredth-of-an-inch.
Why wouldn’t you manage runtimes to the second?
———————
ANOTHER TORO EXCLUSIVE
The INFINITY
®
Series Sprinkler
———————
NO SHOVEL REQUIRED
Mobile access to the information you need and the tasks you need to perform.
———————
LYNX
®
APPS
Only one company is still committed to delivering the newest, most advanced golf satellite control system.
———————
Identify potential issues before they become irrigation problems.
———————
ANOTHER TORO EXCLUSIVE
Runtimes set in inches or seconds?
Why not both?
———————
ANOTHER TORO EXCLUSIVE
3
3/6/19 1:19 PM 19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 3
TABLE OF CONTENTS
4
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 4 3/6/19 1:19 PM
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 5
Lynx ® , Field Controllers & Sprinklers Overview 6-11
Toro ® Support 12
CONTROL SYSTEMS & FIELD CONTROLLERS
Field Controller Comparison Chart 13
Lynx ® Central Control System 14-15
Turf Guard ®
Wireless Soil Monitoring System 16-17
Network Radio-Link & FIU with Radio 18
National Support Network (NSN ® )
Lynx® Smart Satellite
19
20-21
Lynx Smart Module 2-Wire Control System 22-23
CONTROL SYSTEM UPGRADES
OSMAC ® G3 24-25
Network LTC ™ Plus to Network VP ®
Network LTC Plus to LTC Pro
Radio Interface Unit (RIU)
Sensor Input Kits for Satellite Controllers
26
26
27
28-31
32-33 Lynx ® GAC
SPRINKLERS & SUBSURFACE DRIP
Sprinkler Comparison Charts
INFINITY ® Series Rotors
FLEX800 ™ Series Rotors
FLEX800 ™ B Series Rotors
Main Nozzle Adaptor Performance Charts
FLEX800 ™ R Series Conversion Upgrades
T7 Series Rotors
690 Series Rotors
590GF Sprays
Precision ™ Series Rotating Nozzles
Precision ™ Series Spray Nozzles
Subsurface Drip
34-35
36-51
52-63
64-67
68-69
70-73
74-75
76-77
78-79
80-81
82-87
88-89
Swing Joints
Golf Sprinkler Tools
VALVES
Valve Comparison Chart
90-91
92
93
220G Brass Series Valves 94-95
P220G & P220GS Series Valves
Valve Boxes
Dry Boxes
470 Quick Coupler Valves
GOLF LIGHTING
Twilight ™ Golf Cup & Perimeter Lighting
RESOURCES
Wire Sizing and Technical Data
Warranty
Golf Irrigation Distributors
96-97
98-99
100
101
102-103
104
105
106-107
5
3/6/19 1:19 PM
LYNX ® CENTRAL CONTROL SYSTEM OVERVIEW
More information & demo video on
www.toro.com/lynx
BETTER INFORMATION FOR
BETTER CONTROL
The Toro ® Lynx Central Control System was developed from customer input to provide a system that would not only help with today’s jobs, but be ready for what is coming tomorrow. With
Lynx, you can now have all of your essential irrigation information readily available in one place, conveniently combined into a single, intuitive interface.
WHAT CUSTOMERS ARE SAYING ABOUT LYNX
"I always look forward to the new Lynx release to see how many of my ideas got added in."
Easy to Set Up
"It’s very easy to learn and we receive lots of support if needed."
"Easy to use and train others to use successfully easier to dial in programs."
"We went from a system where gaining information was like getting blood from a stone to Lynx where information and monitoring is as good as I have seen."
6
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 6
Easy to Use
"Best and simplest system available."
"The software is easy to use and the irrigation heads are the best available."
"Lynx makes my job easier on a daily basis."
Easy to Access
"Lynx is very easy to use from mobile apps without the use of a handheld radio."
"Everything is where it is supposed to be and easily accessible."
"It is easy, reliable, great support and easy to access remotely."
Superior Support
"NSN makes life easy when you have problems."
"From our distributor to NSN and
Riverside. People are what make it work."
"The support is unlike any other company."
"The product support is leading the industry."
3/6/19 1:19 PM
Lynx Central Control enables the integration of other critical systems to manage your irrigation system with un-paralleled performance, un-matched efficiency and the most comprehensive data access in the industry.
TURF GUARD ® WIRELESS MOISTURE SENSOR
• Get current conditions and historic trends
• Understand where you are now, how you got there, and where you are going
• Make databased irrigation decisions
PUMP STATIONS
• Get current status, alarm monitoring and notification
• Maximize wire to water efficiency
• Reduce energy costs
• Works with: Flowtronex, Watertronics, Motor Controls or Grundfos
WEATHER STATIONS
• Use the weather data for irrigation scheduling
• Monitor and respond to rain fall by adjusting runtimes or suspending irrigation all together
• Works with either Campbell Scientific or Spectrum Technologies
FLOW SENSORS
• Monitor flow amounts against what Lynx has scheduled to ensure pipe breaks do not go undetected
• Dial in the sprinkler performance data to manage water utilization
• Works with Toro, Bermad or Data Industrial
Lynx
®
Mobile Apps Provide Remote Control
Lynx Mobile Apps enable you to control your irrigation system from your smart phone or tablet. Available for both iPhone ® * and Android ™ * devices, Lynx Mobile
Apps offer map and numeric based interfaces for manual irrigation, as well as an easy way to enter or edit LSM addresses.
* iPhone and the Apple logo are registered trademarks of Apple, Inc. in the U.S. and other countries.
* Android and the Android logo are trademarks or registered trademarks of
Google Inc.
Lynx Map Lynx Handheld Lynx Barcode Lynx Dash NSN Connect V2
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 7
7
3/6/19 1:19 PM
Custom pedestal color options help satellites blend into their natural surroundings
FIELD CONTROLS –
INTEGRATE SEAMLESSLY WITH LYNX
®
TORO
FIELD CONTROLS
Innovative, Flexible and Best-in-Class Field Control Options
LYNX Smart Satellite Control
Provides distributed control and added security via intelligent field controllers with an intuitive user interface
Station Based Flow Management helps reduce water window and optimize pump operation
Current Sensing provides protection by monitoring each station output for proper amperage draw
Stores and runs a fully flow-managed irrigation schedule in the event the central computer is offline
Stand-alone capabilities enable you to conduct manual irrigation directly from the satellite faceplate
Station runtimes are executed to the second to provide precise irrigation
2-way wired or wireless communication options enable flexible system design and installation
LYNX Smart Module
Provides direct control via intelligent modules installed inside or near each sprinkler
All system components are below ground, which helps maintain course aesthetics
Lowest cost system option due to reduced amount of wire
Continuous 2-way communication and automated diagnostics ensure system integrity
Best-in-class broadband lightning protection
System can be expanded easily by adding modules to the wire path
Lynx Smart Hub provides additional features and benefits
Toro INFINITY ® and FLEX800 ™ Series sprinklers can be ordered with integrated LSM modules
LYNX Smart Hub
Lynx Smart Hub is a new type of field controller that adds security, programmability and sensing to the benefits and simplicity of a 2-wire system.
Irrigation system can be segmented into manageable areas for simplified maintenance
Provides for in-field manual operation or troubleshooting
Stores and runs a fully flow-managed irrigation schedule in the event the central computer is offline
Creates a convenient point of connection for soil, flow and status sensors
8
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 8 3/6/19 1:19 PM
More information on
www.toro.com/golf
The Lynx
®
Central Control System integrates seamlessly with Toro’s
Field Control options, enabling you to have the complete information needed to support your irrigation decisions.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 9
Lynx®
Central Control
9
3/6/19 1:19 PM
TORO ® GOLF SPRINKLERS
More information & demo video on
www.toroinfinity.com
INFINITY ® SERIES GOLF
SPRINKLERS
Engineered for Today’s Challenges.
Designed for Tomorrow’s Technologies.
The INFINITY ® Series improves your course quality with less workload and most important, it keeps golfers playing. Calculate the money you’ll save by cutting sprinkler maintenance from hours to minutes.
Smart Access ®
Provides top accessibility to all critical components.
No digging or unsightly turf repair scars
Pilot valve removable with water “ON”
Lynx ® Smart Module (LSM)
Customizable marker
No buried wire splices or ground faults
Replaceable cover if damaged
Increased labor efficiency
Lower long term cost of ownership
Future Proof
The SMART ACCESS ® compartment provides room to grow. Whatever the future holds, this sprinkler is ready.
Protective Enclosure
The protective enclosure isolates wire splices from the soil and potential shorts to ground.
Provides access for system troubleshooting and repairs without digging!
10
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 10 3/6/19 1:19 PM
FLEX800
™
SERIES GOLF
SPRINKLERS
Golf sprinklers with all the efficiency and proven performance features and benefits of the 800S and DT Series
FEATURES AVAILABLE IN
INFINITY AND FLEX800 SERIES
TRAJECTORY ADJUSTMENT
24-position TruJectory TM or Dual trajectory to help fight the wind, avoid obstacles or reduce the radius.
NOZZLE BASE CLUTCHING
Hot spot watering has never been easier, simply turn, hold and shoot to put down as much water as needed.
LARGE NOZZLE SELECTION
From 20’ to 100’ we’ve got you covered!
Toro provides the flexibility to optimize your system for maximum uniformity.
PART AND FULL CIRCLE MODELS
Align part circle sprinklers quickly and easily or adjust watering locations to suit seasonal needs.
11
3/6/19 1:19 PM 19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 11
TORO SUPPORT
Toro Technical Support
Our technical support team is highly skilled at what they do. From helping superintendents program controllers, to troubleshooting complex system issues with consultants, the support team provides years of irrigation experience that you can count on. For exceptional technical support, call 1-877-345-TORO (8676) .
Toro Controller Repair
Did you know that with Toro’s Board Exchange Program you can get the replacement controller boards you need immediately? Through your distributor, Controller Repair provides controller boards ready for immediate board exchange to assure that controller downtime is minimal and your golf course and reputation stays protected.
For immediate assistance call: 1-877-345-TORO (8676) .
Visit Controller Repair website at www.toro.com/controller-repair
Toro Distributor Support
Our distributors have been our partners for an average of 40 years (10 to 88 years) and we consider them an extension of us. See page 98 for a list of Toro Golf Irrigation
Distributors.
Toro Field Service
With some of the most knowledgeable and helpful field service staff in the industry, and our extensive training and support programs; Toro field service personnel are always there to assist—before, during, and well after a sale.
Toro Genuine Parts
From the smallest sprinkler part to complete control systems, Toro Service Parts
Support can deliver most replacement parts to our distributors within hours. In fact,
Toro offers its customers the highest parts order completion rate in the industry: 98%!
Toro Financing
By offering a variety of customized, competitive financing plans, Toro gives you
“one-stop shopping” eliminating the need for third-party funding. You can improve your course without draining your budget.
Toro National Support Network (NSN ® )
A team of A+ certified technicians and licensed irrigators dedicated to the daily operations and maintenance of computerized central control systems for customers worldwide. (See page 19 for more information.)
12
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 12 3/6/19 1:19 PM
CONTROL SYSTEM AND FIELD CONTROLLERS
Lynx ® Central Control System
Pages 14-15
Field Controller Comparison Charts
Feature/Capability
Catalog Pages
Maximum Stations
Per Controller
Maximum Simultaneously
Operating Stations Per Controller
Lynx Smart Satellite
20-21
64
32
Lynx Smart Hub
22-23
1000
200
64 8 Stand-alone Programs
Wireline Field
Communication
Wireless Field
Communication
Upload Field Changes
Yes
Yes
Yes
Yes
Yes
No
Field Controller Alerts
Downloaded Programs
Station Based Flow
Management
Station Current Sensing
Station Runtimes
In Seconds
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 13
13
3/6/19 1:19 PM
LYNX
®
CENTRAL CONTROL SYSTEM
The Toro ® Lynx ® Control System was developed specifically to help you address the unique challenges and changing priorities you face every day. With the Lynx System, you can now have all of your essential irrigation information readily available in one place, conveniently combined into a single, intuitive interface.
WHAT’S NEW IN LYNX 7.0
Lynx Smart Module Hardware Platform Added
Including:
Runtime Resolution to the minute and second
Standard Diagnostics include Communication, Volts and Amps
Map Selection of stations for Standard Diagnostics
Express Diagnostic includes Communication, Amps and Volts
Simultaneous Diagnostics when multiple Smart vs used
Station Mapping in the Express method
Synchronization with mapping error detection and automatic remapping
Diagnostic Results color coded and displayed on the map with values
Station Status Report showing volts, amps and line balance
LSM Firmware Update from Lynx computer
Lynx apps support Lynx Smart Module platform
Active Days on Watering Plan includes Interval days control.
Automatic Verification Polling control
Manual Verification Polling control
Threshold Setting for map station labels
14
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 14 3/6/19 1:19 PM
SPECIFICATIONS – Lynx ® Levels Comparison
SYSTEM CAPACITY Lynx CE Lynx PE
Satellites
Satellite Stations
LSM Stations
Weather Stations
Pump Stations
Courses
Holes
Hydraulic Branches
HARDWARE SUPPORTED
Lynx ® SMART HUB
OSMAC ® G3
LSM
Lynx ® Smart Satellite
PROGRAMMING
Current Sensing
Station Adjust Upload
Site Code Categories
Precip. Mgmt. Groups (PMG)
Max. Stations/Hole Control
Instant Program Creation
Program Priority
Pump Profiling
Station Group Multi-Manual
Master Group Multi-Manual
Pump Integration
Weather Station Alarms
ET Auto Calc. RT Method
Yes
Yes
Yes
Yes
Yes
Yes
Yes
7
Yes
Yes
Yes
Yes
Yes
500
32,000
6400
10
10
3
48
1024
Yes
Yes
Yes
Yes
500
1344
1000
10
3
2
48
300
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
No
No
3
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
No
No
No
No
No
No
Optional
Optional
Optional
Lynx SE
500
512
500
10
2
1
48
100
ADDITIONAL FEATURES SMART SET UP
Runtimes:
• Runtimes are executed to the second rather than rounding to the whole minute, resulting in more precise irrigation and water savings
• Control your irrigation by setting runtime or application inches and let the system calculate. See exactly how much water you will apply and how long you will irrigate each area
• Integrated runtime display shows past and planned irrigation activity so you can easily determine what action to take
Quick Start:
• With Quick Start, you create station, hardware and area associations, and control the definition of greens, tees, fairways and sprinklers based on the their locations
• A basic hydraulic tree is auto-generated for you during Quick Start
Communication:
• Current-sensing capabilities notify you of wire cuts and sprinklers unintentionally turned off
• Constant communication with Lynx Smart Hub satellites lets you take action if a power outage threatens irrigation
• Toro LSM communication and solenoid diagnostics help identify shorts, low voltage and other issues
• Weather station integration and Handheld Remote Interface support are included as standard features
Ease of Access:
• Lynx Dash – Turf Guard, pump storm local weather, Lynx status
• Lynx Map – GPS location, manual operation, favorites
• Lynx Handheld – All in one command set, command log, last dialed
• Lynx Bar Code – Add or replace, field test of new units
NSN ® Connect V2
Remote access so that you can control irrigation anytime, anywhere from any web enabled device.
Specifying Information—Lynx Central
Model
L X
LX-LYNX Central Control
Computer Hardware
0 X
1—Standard Computer
4—Premium Computer
LX-0 X X XX
Service
1—1-year NSN
5—5-years NSN
X
O—CE
1—SE
2—PE
Levels
X
Field Hardware
1—For OSMAC
X
7—For Lynx Smart Satellite
8—For 2-wire
Example: When ordering a LYNX Central standard computer with one year of NSN and CE Level with Lynx Smart Satellite field hardware, you would order: LX-01-1-07
LYNX-NSN-STAN
LYNX-NSN-PREM
LYNX-NONNSN-STAN
LYNX-NONNSN-PREM
LX-SW
Model
Specifying Information—Lynx CE Central Upgrade for SitePro®
Description
Lynx Upgrade - NSN – Standard Toro Computer
Lynx Upgrade - NSN – Premium Toro Computer
Lynx Upgrade-NSN-Standard Computer and 1-year NSN Support
Lynx Upgrade-NSN-Premium Computer and 1-year NSN Support
Software, Lynx, Client/Server
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 15
15
3/6/19 1:19 PM
TURF GUARD
®
WIRELESS SOIL MONITORING SYSTEM
Get the essential soil information you need, when you need it. Stay up to date on your current soil conditions no matter where you are. Get the information you need to make important decisions in real time. Turf Guard sensors instantly track soil moisture, salinity, and temperature, saving you time. Repeaters mount easily inside all Toro
Lynx ® Smart Satellite, Lynx Smart Hub (LSH) Network LTC ™ Plus and E-OSMAC ® satellite pedestals.
FEATURES & BENEFITS
Reduce Water Usage and Improve Playability
Monitor moisture levels and adjust irrigation without risking turf quality. Promote root growth by avoiding over watering. Detect dry areas before they impact the turf’s health.
100% Wireless Network
No wires between the repeaters and the sensors, or the sensor and the probes means that sensors can be installed anywhere on the course without disrupting play. Install sensors without having to trench or pull wires.
Take the Guesswork out of Managing Salinity
Track salt build-up and schedule flushing as needed. Get positive confirmation that you're flushing reduced soil salts. Know when and how much water to flush with.
Web-based or Stand-alone Interface
Graphical course overview displays sensor data at-a-glance. Plus with Toro
Lynx ® Control System integration you can check course moisture, salinity and temperature readings right from your irrigation control software.
16
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 16 3/6/19 1:19 PM
HOW IT
WORKS…
One to three sensors buried in each green at critical root zone levels
Additional sensors buried in fairways, tee boxes and planters
Above-ground radio repeaters installed on or in existing irrigation pedestals
Wireless MESH networking links all sensors to central control system
Moisture, Temperature and Salinity readings displayed in your office
ADDITIONAL FEATURES
Operational
• Two distinct depths in the soil profile – critical root zone level and a second 5” lower. Independent measurements from each depth.
• MESH routing technology offers complete coverage even in remote canyon courses.
• Repeater mounts in most Toro irrigation satellite pedestals. An external repeater is available for other models including non-Toro pedestals.
• Supports up to 500 sensors per course
• Expected sensor battery life of 3 years, field replaceable.
• Sensor reading sent every 5 minutes.
• Automatic network configuration and failure recovery.
• Plots trends and compares historical and current readings.
• Lynx ® Control System integration
Electrical
Input Power:
- Repeater: <.02A @ 6 VDC
- Base Station: <.1A @ 120 VAC, 50/60 Hz
• UL and CE approved
Dimensions:
• Body: 2” x 3” x 5”
• Spikes: 2.5” x 3/16”
• Installation Hole Diameter: 4.25”
Temperature:
• Operating: 32º F to 140º F
• Storage: -22º F to 180º F
Sensing:
• 0.1°F temperature resolution
• 0.1 % volumetric soil moisture content resolution
• 0.1 dS/m soil conductivity resolution (salinity)
Communication:
• Repeater Range: 2,000’ line-of-sight
• Buried Sensor Range: 500’ line-of-sight
• 900 MHz ISM Band FHSS communication
• Additional licensing not required
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 17
Model
TG-S2-R
TG-R-INT
TG-R-EXT
TG-B
TG-S2-BAT
Specifying Information—Turf Guard ®
Description
Turf Guard Sensor With Replaceable Battery
Repeater-Internal Mount
Repeater-External Mount
Base Station
Sensor Replacement Battery
17
3/6/19 1:19 PM
NETWORK RADIO-LINK AND FIU WITH RADIO
Network Radio-Link offers you the flexibility to design your irrigation system unconfined by the limitations of distance or terrain. Oversized acreage and natural barriers are not a problem for Network Radio-Link. Communicating where wires can't run, it's the bridge between non-contiguous wire line systems and much more.
FEATURES & BENEFITS
Wireless communication to Network satellites
Network Radio-Link kits for upgrades
True 2-way communication
Multi-port field interface allows one radio to be shared among many satellites
Easy satellite installation
Compatible with Network LTC ™ , LTC Plus, LTC Pro, Network
8000, Network VP ® , Lynx ® Smart Satellite and Lynx Smart Hub
Specifying Information—Field Interface Unit (FIU)
Model
FIU-2011
FIU-2011R
FIU-2011DR
FIU-2021
FIU-2021R
FIU-2021DR
Description
Field Interface Unit with 1 Wire Line & 1 Radio Line, Radio Not Included
Field Interface Unit with 1 Wire Line & 1 Radio Line, Radio Included
Field Interface Unit with 1 Wire Line & 1 Digital Radio Line, Radio Included
Field Interface Unit with 2 Wire Lines & 1 Radio Line, Radio Not Included
Field Interface Unit with 2 Wire Lines & 1 Radio Line, Radio Included
Field Interface Unit with 2 Wire Lines & 1 Digital Radio Line, Radio Included
Note: FCC license required.
18
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 18 3/6/19 1:20 PM
NATIONAL SUPPORT NETWORK (NSN ® )
TORO NSN
Where We are
Dedicated to Service!
What is the National
Support Network (NSN ® )?
The NSN is based in Abilene, Texas, with a team of dedicated technical support specialists, including 20 licensed irrigators, with an average tenure of 10 years and combined over
340 years of Toro NSN experience.
Toro NSN was founded over 25 years ago, the first dedicated customer support network in the irrigation industry.
We are here to provide you with confidence and peace of mind, complete central control system operational assurance.
Simply, we are here to support you and keep you irrigating 24 hours a day, 7 days a week.
What Services Does
NSN Provide?
1-800-ASK-TORO – we are here to support you 24 hours a day, 7 days a week, 365 days of the year.
Extended warranty, with next shipping day hardware replacement of central control system, fulfilled by qualified Toro technicians.
Remote access to your central control system, allowing you to control your irrigation when you are outside of the office.
NSN Portal – a web-based customer portal providing a knowledge-sharing database, on-line chat, and training.
Training events – regular web-based training seminars are offered for all new Lynx customers.
In addition, regional training events are hosted throughout the US and Canada.
Toro NSN – Because Your Business Deserves the Best Customer Care!
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 19
19
3/6/19 1:20 PM
LYNX
®
SMART SATELLITE
20
The all-new Lynx Smart Satellite sports a familiar look but is designed to improve performance and reliability. Picking up where the accomplished Network VP ® left off, the Lynx Smart Satellite adds enhanced communications with the
Lynx Central Control System and integration with field sensors to further complement your decision making. Lynx
Smart Satellite is also fully compatible with Network VP and Network 8000 systems as an addition or replacement.
FEATURES & BENEFITS
Smart Design
Designed for Performance
Faster microprocessor and increased memory for high performance today and the capacity for future enhancements tomorrow.
Designed for Reliability
Fewer cables and connectors, corrosion-resistant metals, vented circuit board covers, and simplified power distribution contribute to greater reliability.
Smart Features
Updated User Interface
Familiar arrow buttons and selector knob navigate the menu options in a larger backlit six-line display. Manual and diagnostic operations are easy, productive, and intuitive.
Enhanced Wireless Communications
New digital radio with an integrated modem provides improved communication signal integrity, new diagnostic information, and control options.
Optional Sensor Input Kit
Designed to integrate with the new Sensor Input Kit, allowing either local or Lynx
Central response to information from anywhere on the course.
Plus all the Great Features of the Network VP
Station-Based Flow Management, current sensing and alarm response, runtimes to the second, Group Multi-Manual operation, Basic/Advanced/Grow-In programs.
Lynx® Smart Satellite
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 20 3/6/19 1:20 PM
Lynx Smart Satellite –
Inside View
Clear Vented Covers on
Circuit Boards: protection from pests and corrosion
Stainless Steel and Plated
Metal Parts: additional corrosion resistance
LED Indicators: confirmation of normal function and diagnostic information to assist with troubleshooting
Shielded Connectors: secure and reliable connections between components
Optional Sensor Input Kit
Pressure, Flow Rate, Rain,
Status, and Temperature
Includes 8 station outputs and 7 sensor inputs
Updated User Interface
High-Contrast Backlit Display
Intuitive Navigation
Processor and Memory for
High Performance and Future
Enhancements
SPECIFICATIONS
Operational
• Functions as a stand-alone controller or under the management of a central computer operating Lynx or SitePro Central Control System
- Supports wireline or radio communications
- Supports hybrid communication (wireline and radio)
• 64 irrigation programs
• Basic, Advanced and Grow-In programs
• Station Autocycle
• Percent Adjustment from 1% to 900%
• Each output can be defined as an irrigation station or general application switch
• Nonvolatile memory retains program information and satellite settings during power-off conditions; battery backup retains the date and time
• 16-64 stations in 16 station increments; individual station control and the ability to run up to 32 stations simultaneously
• Backward compatible with Toro Network VP and Network 8000 satellite systems
Electrical
• UL Listed
• Input Power
108 V ac to 132 V ac, 60 Hz
- 0.20 amps (no load) 115 V ac
216 V ac to 264 V ac, 50 Hz
- 0.10 amps (no load) 230 V ac
0.60 amps (max. load) 230 V ac
• Output Power
- 24 V ac: 3.0 amps
(max. total load)
Dimensions
• Plastic Cabinet:
17”W x 40”H x 16”D
Temperature/Humidity
• Operating Temperature:
15ºF to 140ºF
• Storage Temperature:
-22ºF to 149ºF
• Humidity: 0% to 95% RH
(noncondensing)
Options
• Surge Protection
• Sensor Input Kit
Choice of Three Pedestal Colors
Custom pedestal color options help satellites blend into their natural surroundings.
(Green, Tree Bark, and Desert Sand)
Specifying Information—Lynx ® Smart Satellite
300-0 XXY 6 ZS A
Description
300
300—Lynx Smart
Satellite
Configuration
XX
16—16 Stations
32—32 Stations
48—48 Stations
64—64 Stations
Cabinet
Y
P—Plastic, Green
T—Desert Sand
B—Tree Bark
Output
6
6—24 VAC Electric
Comm.
Z
A—Stand-alone
M—2-Way Wire Modem
R—UHF Radio
H—Radio & Wire Modem
Options
S
3—Large-capacity Terminal Block & Switches
4—Large-capacity Terminal Block w/Add’l
Surge & Switches
Example: When ordering a 48-station, radio-equipped, Lynx Smart Satellite with large-capacity terminal block, additional surge and switches, specify: 300-048P6R4A
Sensor Input Kit for Lynx Smart Satellite: SMRT-SEN-BRD-KIT
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 21
21
3/6/19 1:20 PM
LYNX
®
SMART MODULE 2-WIRE CONTROL SYSTEM
The Toro Lynx Smart Module 2-Wire Control System uses innovative technology to provide an irrigation solution that is reliable and efficient. Using a 2-wire path to communicate to buried control units, the system reduces the costs associated with traditional valve wire bundles and provides a solution that is vandal resistant, easy to install and easy to expand.
FEATURES & BENEFITS
Speed
Provides information faster than other two-wire brand, reducing test times from minutes to seconds and providing greater visibility into the overall health of the irrigation system.
Diagnostics
Built-in diagnostics automatically let you know if there are any problems. The wire path check quickly confirms that the whole system is operational.
Precision
Apply water with one-second resolution. The exact amount of water is placed exactly where it’s needed.
Upgradeable
Upgrade remotely with just a click. Innovative new features and benefits are just a click away
Durable
Best in class surge protection to help weather the storm. It works with the Lynx Smart Hub, which protects the flow managed irrigation schedule, even in the event of a central failure if the central is down.
Best in class broadband lightning protection.
Integrated Sprinkler
Toro INFINITY ® and FLEX800 ™ Series sprinkler models have an integrated
2-wire module option.
22
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 22 3/6/19 1:20 PM
INTERFACE OPTIONS
Lynx Smart Hub
Lynx Smart Hub is a new type of field controller that adds security, programmability and sensing to the benefits and simplicity of a two-wire system.
SPECIFICATIONS
Operational
Lynx ® Central:
- Mapping capabilities
- Remote hand-held operation
- Weather station integration
- Pump station integration
• Enhanced diagnostics:
- Communication
- Electrical shorts/opens
- Solenoid check
• No holding power required to operate stations
• Decoder identification is a unique 6-character address
Installation
• Maximum number of wire paths: 4 per gateway
• Maximum number of Lynx Smart Hubs: 20 per system
• Maximum number of modules per wire path: 250
• Maximum stations per Lynx Smart Hub: 1000
• Maximum stations per system: 10,000
• Simultaneous stations per output board: 100
• Maximum distance from central to module (using 14 gauge wire): 2.8 miles
• Maximum distance from module to sprinkler (using 14 gauge wire): 400 ft.
• Solenoids per output: 2 DCLS-P
• Stations per module: 1
Electrical
• Input power: 88-264 V ac, 50/60 Hz
• Output Power:
- Output voltage: 40 V ac max
- Output power: 75 VA max
- Class 2, SELV
• ISP 2-wire modules are rated at 20 KV surge protection
• 2-Wire modules wiring: 14 awg
The system can be segmented into manageable areas for simplified maintenance
Provides for in-field manual operation or troubleshooting
Stores and runs a fully flow-managed irrigation schedule in the event the central computer is offline
Creates a convenient point of connection for soil, flow and status sensors
Lynx Smart Hub
Specifying Information—2-Wire Modules
LSM-1
Type
LSM
Configuration
X
Lynx Smart Module 1—1-station
Example: A 1-station Lynx Smart Module would be specified as: LSM-1
*Refer to sprinkler pages for specifying information on Sprinkler 2-wire Modules or
Lynx ® FIU-2011DR DEC-RS-1000-M DEC-RSP-1000-DR
Type
DEC
DEC
Configuration
XXX
RS—Lynx Smart Hub
Specifying Information—Gateway or Lynx Smart Hub
DECXXX XXXX XX
Cabinet
X
Station Count
XXXX
WM Metal 1000—1000 Stations, Lynx Smart Hub*
Communication Type
XX
M—Wireline
DR—Radio P—Green Plastic Pedestal
B—Brown Plastic Pedestal
T—Tan Plastic Pedestal
Example: A1000 station Lynx Smart Hub with green plastic pedestal and radio communication would be specified as: DEC-RSP-1000-DR
Note: A blank after RS indicates the wall mount cabinet. P, B, and T indicate green, brown, and tan plastic pedestals.
23
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 23 3/6/19 1:20 PM
CONTROL SYSTEM UPGRADES
OSMAC ® G3 Satellite
Updated for 2019, the OSMAC G3 satellite combines value and reliability in one controller.
Wireless communications, easy installation and setup, and compatibility with existing OSMAC systems make the OSMAC G3 an ideal choice for a control system upgrade or retrofit. As part of a Lynx® Central Control system, the OSMAC G3 will run flow-managed programs using station run times executed to the second for precise water application. An upgrade kit is available for
E-OSMAC satellites, adding new functionality, including program storage for stand-alone function and a user interface for performing manual irrigation or diagnostic activity.
FEATURES & BENEFITS
Reliable Design
Designed for reliability, featuring a limited number of cables and connectors, corrosion-resistant metals, vented circuit board covers, and simple parallel power and signal distribution.
Enhanced Wireless Communication
Equipped with a high-performance receiver with integrated modem, providing industry-leading communication signal integrity, reliability, and signal strength indication. Wireless communication also allows easy system expansion.
OSMAC Compatible
Compatible with any narrowband OSMAC system equipped with an OSMAC Base Station or Radio Interface Unit (RIU).
Able to retrofit with OSMAC RDR and E-OSMAC satellites.
Productive and Precise
Operates up to 32 stations simultaneously with run times executed to the second for productive and precise water application.
24
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 24 3/6/19 1:20 PM
CONTROL SYSTEM UPGRADES
Information and Control:
Received messages are logged with signal strength indication
Stand-alone capabilities enable running scheduled irrigation programs
• A convenient backup option and useful during course
construction
Manual operation capabilities include program start, station multi-manual, and syringe cycles
• A trusted point of control on the course
Diagnostic information is available in the display menus and through LED lights
• Confirmation of normal function and information to guide
troubleshooting
Capable of remote operation with hand-held radio and Lynx Apps
• Flexible control options, on and off the course
SPECIFICATIONS
Operational
Functions under the management of a central computer operating Lynx, or SitePro, Central Control System, or as a stand-alone controller.
Stations: 16 to 64 in 16 station increments
• Up to 32 stations may operate simultaneously
• Station run times received from Lynx® Central are executed to the second, from 1 second to 8 hours and 59 minutes
• Station run times programmed in Local mode are executed to the minute, from 1 minute to 59 minutes
• Any station can be configured as a switch. Switch operation will ignore rain hold and does not activate the pump/master valve circuit
Local Mode Operations
• 12 independent local programs
• 14 day calendar or 1 to 30 day interval scheduling
• Up to 24 start times per program
• Simultaneous station operation defined independently per program
• Program percent adjust from 10 to 250%
• Nonvolatile memory saves program data for up to 10 years without power
Manual Operations
• Multi-Manual station start up to 32 stations
• Program start
• Program syringe
Electrical
• Input power: 120/240 V ac, 50/60 Hz
OSMAC G3:
- 0.20 amps, 110-120 V ac, 60 Hz (no load)
- 0.96 amps, 110-120 V ac, 60 Hz (max load)
- 0.10 amps, 220-240 V ac, 50/60 Hz (no load)
- 0.47 amps, 220-240 V ac, 50/60 Hz (max load)
Dimensions
• Plastic Cabinet: 17” W x 40” H x 16” D
Options
• Surge protection
Specifying Information—OSMAC G3 Satellites
G4XXX 6R X
Cabinet Output Communication Description
G4
G4 – OSMAC G3
2019+
Configuration
XX
16 – 16 Stations
32 – 32 Stations
48 – 48 Stations
64 – 64 Stations
X
P – Plastic Green
B – Plastic Tree Bark
T – Plastic Desert Sand
6
6A – 24VAC
R
R – Narrowband Radio
Options
X
3 – Large Terminal Blocks, Switches
4 – Large Terminal Blocks, Switches,
Premium Surge
Example: When specifying a 48-station, satellite in a green plastic cabinet with large terminal block, switches and premium surge you would specify: G4-48P6R4
OSMAC G3 Upgrade Kit:
Upgrade E-OSMAC satellites with the OSMAC G3 Upgrade Kit
manual irrigation or referencing diagnostic information, including
communications details through Page History.
• Add backup program storage for stand-alone operations
when in Local mode.
• Upgrade receiver hardware to a high-performance receiver
radio for improved reliability and for signal strength indication.
Specifying Information
– OSMAC G3
Upgrade Kit
118-2987
Kit Contains
OSMAC G3 Timing Module,
Interface Cable and Hardware
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 25
25
3/6/19 1:20 PM
CONTROL SYSTEM UPGRADES
Network LTC ™ Plus to Network VP ®
Available as an upgrade kit for existing LTC Plus satellites.
Upgrade kit includes Network VP Faceplate, Network LTC Plus
To Network VP Power Distribution Board, Cable and Hardware.
FEATURES & BENEFITS
Station based flow management shortens watering window
Intuitive user interface simplifies manual irrigation
Station runtimes executed to the second helps save water
Upgrade to Lynx for enhanced central capabilities
(requires all satellites to be upgraded)
Specifying Information—Network LTC Plus Upgrade Kit
118-0038
Kit Contains
Network VP Faceplate, Network LTC Plus To Network VP Power Distribution Board, Cable and Hardware
Network LTC Plus to LTC Pro
Available as complete satellites or upgrade kit for existing LTC
Plus satellites. Upgrade kit includes LTC Pro Faceplate, Power
Distribution Board, Cable and Hardware.
FEATURES & BENEFITS
Intuitive user interface simplifies faceplate functions
Enhanced manual operations
– Runtimes to the second
– Stackable multi-manuals
– Start/Pause/Stop
Backwards compatible with SitePro ®
Can upgrade 1 satellite at a time
(full system must be upgraded prior to a Lynx upgrade)
Description
LTCR
LTCR - LTC Pro
Specifying Information—LTC Pro Satellites
Configuration
XX
16 – 16 Stations
40 – 40 Stations
LTCR XXX 6 XX
Cabinet
X
Output
6
P – Plastic Green 6 – 24VAC
Comm.
X
M – Wire
R – Radio
Options
X
4 – Large Terminal
Block, Switches,
Premium Surge
Example: When specifying a 40-station, wire communication satellite, you would specify: LTCR40P6M4
26
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 26
Specifying Information—
LTC Pro Upgrade Kit
118-4838
Kit Contains
LTC Pro Faceplate, Power Distribution Board,
Cable and Hardware
3/6/19 1:20 PM
CONTROL SYSTEM UPGRADES
Radio Interface Unit (RIU)
The Toro® Radio Interface Unit combines the functions of the OSMAC® Base Station and
Hand-held Remote Interface (HHRI) in a single unit. Available in a dual radio configuration that performs both Base Station and HHRI functions, a single radio configuration that’s programmable for either function, and a radio-less configuration that’s programmable for either function and utilizes a user-supplied external radio for added flexibility.
FEATURES & BENEFITS
Provides control of your system while you're on-the-go
Provides both hand-held control and central-to-satellite communication
Designed to operate continuously, 24/7
Interfaces with your Lynx® or SitePro® central without the burden of recurring network costs
Tailored to fit your application with programmable selections for: OSMAC Base Station and hand-held remote interface modes, independent transmit/receive
UHF frequencies, independent transmit/receive private line settings (CTCSS) and transmit power.
Specifying Information—Radio Interface Unit (RIU)
Model
RIU-00
RIU-01
RIU-02
Description
Radio Interface Unit – External Radio
Radio Interface Unit – Single Radio
Radio Interface Unit – Dual Radio
Note: FCC license required.
Radio Interface Unit (RIU) Graphical User Interface.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 27
27
3/6/19 1:20 PM
CONTROL SYSTEM UPGRADES
Sensor Input Kits for Satellite Controllers
The Sensor Input Kits for Lynx Smart Satellite and Network VP deliver important field data to the superintendent’s office. Relevant data is the foundation of informed decision making, whether the decision is made by a human or a computer. A satellite controller equipped with either of the two Sensor
Input Kits can receive data from up to seven sensors. The satellite collects, stores, and delivers the data to Lynx, where it can be accessed by the superintendent on the Sensor Dashboard. Lynx also can respond automatically to changes to the irrigation system and changes in weather conditions. A Sensor
Input Kit can help save the valuable resources of time and water, and help keep course conditions at their best.
SENSOR INPUT KIT FOR NETWORK VP ® SENSOR INPUT KIT FOR LYNX ® SMART SATELLITE
VP-SEN-BUNDLE
118-5487SK
VP Timing Module – Sensor Compatible
VP-SEN-BRD-KIT
Sensor Board
& Teminal Board
28
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 28
SMRT-SEN-BRD-KIT
3/6/19 1:20 PM
CONTROL SYSTEM UPGRADES
FEATURES & BENEFITS
Lynx Sensor Dashboard Presents the Real-time Status of Sensors on the Course
At-a-glance understanding of the condition of the course irrigation system and weather inputs enhance decision-making.
Lynx Report Generator Presents Logged Sensor Data in Tabular or Graphical Format
Display trends over time for a complete understanding of the weather and irrigation system.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 29
29
3/6/19 1:20 PM
CONTROL SYSTEM UPGRADES
Sensor alarms and responses can be easily configured in Lynx with numerous options for responses to alarm conditions.
Automatically Safeguard Your Course, Eliminate Water Waste, and Ensure Efficient Irrigation
Alarm & Response Examples:
Pressure Sensor: Set alarm conditions and appropriate responses for high and/or low pressure values
A text notification or email can be sent if measured pressure falls below a specified value.
Rain Gauge: Prevent, suspend or adjust irrigation in the event of a measurable rain event
Lynx will account for measured rain on an hourly or daily basis and automatically apply a Rain Hold or adjust scheduled activity to account for the rain fall received.
Temperature Gauge: Set alarm conditions and appropriate responses for high and/or low air temperature
Activate greens fans through a satellite switch output when air temperature exceeds the alarm value for a set duration
Suspend irrigation when air temperature is near freezing.
Switch Status: Set alarm conditions and appropriate responses for changes in switch state
Control pond or tank water level using level switches to trigger a pump or valve to transfer water, maintaining water level within a set range.
Flow Meter: Set alarm conditions and appropriate responses for high and/or low flow rate values
A satellite switch can be closed if a flow out of tolerance is observed, signaling the pump station to shut down.
Photo credit: Jeremy Klotz
A flow out-of-tolerance condition, manageable with a sensor input kit, flow meter, an automatic alarm response in Lynx®.
30
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 30 3/6/19 1:20 PM
Toro Sensors
Pressure Sensor
Approved Model: PRESS200-SEN-KIT
Toro Pressure Sensor Kit: 0 – 200 PSI
Temperature Sensor
Approved Model: TEMP-SEN-KIT
Toro Temperature Sensor Kit
Recommended Sensors
CONTROL SYSTEM UPGRADES
SPECIFICATIONS
Sensors
The Sensor Input Kits can accept up to seven sensors; they are compatible with the following sensors:
• (1) Pressure sensor
• (1) Temperature sensor
• (5) Flow meter, rain gauge, or switch status
Satellites equipped with Sensor Input Kits can accommodate up to
56 station outputs:
• The Sensor Input Kit for Network VP includes a sensor input board that takes the place of an eight station output board
• The Sensor Input Kit for Lynx Smart Satellite is a module that contains eight station outputs and seven sensor inputs.
It takes the place of a sixteen station output board.
• Lynx version 5.0 or later is required for interaction with the
Sensor Input Kits
• The Sensor Input Kit for Network VP includes a new Timing
Module with faster processor, larger display, and expanded memory
Sensor Input Kit for Network VP
Model: VP-SEN-BUNDLE
• 118-5487SK: VP Timing Module, Sensor compatible
• VP-SEN-BRD-KIT: Sensor Board and Level 4 Terminal Board
Sensor Input Kit for Lynx Smart Satellite
Model: SMRT-SEN-BRD-KIT
Toro Pressure Sensor Kit
Model: PRESS200-SEN-KIT
• 0 – 200 PSI
• ¼” – 18 NPT male thread
Toro Temperature Sensor Kit
Model: TEMP-SEN-KIT
Recommended accessory: Radiation Shield Davis #7714
Rain Gauge
Recommended Model: Texas Electronics TR525I
Flow Meter
Recommended Models: Data Industrial 200 Series or Bermad
900M Series, reed switch signal
Radiation Shield for
Temperature Sensor
Recommended Model:
Davis ® #7714
Rain Gauge – Tipping Bucket
Recommended Model:
Texas Electronics TR 525I
Flow Meter
Recommended Models:
Data Industrial ® Series 200 or Bermad ® 900 M Series
Davis, Data Industries and Bermad are trademarks or registered trademarks of their respective companies.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 31
31
3/6/19 1:20 PM
CONTROL SYSTEM UPGRADES
Lynx® GAC
The Lynx upgrade system uses modern electronic technology to enable users of older decoder control systems to upgrade to a modern central with new field hardware. New features like remote control from your phone, moisture sensing and sophisticated diagnostics are now available without replacing your entire irrigation system.
FEATURES & BENEFITS
Upgrade your old control system
Works with your existing sprinklers and wiring – just replace your field decoders and the central control.
Modern Electronics
Higher surge protection, more precise run times and
2-way communication.
Works with Toro’s Lynx Central Control
Easy to Install, easy to support, easy to use.
Benefits for Users of Older CDS,
Rain Bird ®* and Hunter ®** Systems:
Two-way communication
More precise run times (+/- 1 second)
Enhanced diagnostics – rapid communication check, voltage and amperage, cable length
20KV lightning protection
Lynx Central Control (all the benefits, apps, NSN ® )
1-station fits in Toro INFINITY ® Series golf sprinklers with Smart Access ®
* Rain Bird is a registered trademark of the Rain Bird Corporation.
** Hunter is a registered trademark of Hunter Industries
Lynx Central
Lynx GAC Modules
32
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 32 3/6/19 1:20 PM
CONTROL SYSTEM UPGRADES
Solenoids Per
Output
Surge
Protection
Wire Paths
Per Interface
Solenoid
Characteristics
24VAC,
60 Hz
Holding
Current
Two-Way
Feedback from Decoder
Module
Feature
Stations Per
Wire Path
Devices Per
Wire Path
Outputs
Maximum 14
AWG Wire
Path Length
Simultaneous
Stations with
6800 ft of 14
AWG Cable
Distance from Decoder
Module to
Solenoid
Toro GAC
500
125
1,2,4
6800 ft
16
575 ft
2
20 KV
2
400mA inrush,
250mA holding
40mA
VOLTS
AMPS
DISTANCE
2
1200 ft
2
6-8 KV
4
400mA inrush,
200mA holding
300mA
NO
CDS
112
112
1,2,3,4
5400 ft
Rain Bird FD Hunter Pilot
250 250
250
1,2,4,6
10,000 ft
250
1,2,4,6
8000 ft
20
220 ft
2
6-8 KV
2
400mA inrush,
250mA holding
20mA
NO
20
240 ft
VOLTS
AMPS
2
15 KV
4
400mA inrush,
250mA holding
45mA
SPECIFICATIONS
Operational
Enhanced diagnostics
• Communication
• Electrical shorts/opens
• Voltage
• Amperage
Module addresses are factory programmed
Low holding current
Installation
Maximum number of wire paths
• 2 per gateway
Maximum number of gateways
• 4 standard, 4 expansion
Electrical
• Input voltage: 100-240 VAC, 50/60 Hz
• Input current: 1.6A/1.0A (115/230)
• Output voltage: 40VAC max
• Output power: 75VA max
• Class 2, SELV
• Decoders and gateways have 20KV surge protection
Temperature
• Operating temperature: 32F to 140°F
• Storage temperature: -22F to 140°F
Type
DAC
DAC
Type
DAC-ISP
DAC-ISP-Module
Specifying Information—GAC Module
DAC-ISPX
Station Count
X
1-1 Station, 2-2 Station, 4-4 Station
Specifying Information—Gateway
Configuration
DACXXX XXXX
XXX
Cabinet
X
PCS – Central
RS - Remote
WM Metal
P—Green Plastic Pedestal
B—Brown Plastic Pedestal
T—Tan Plastic Pedestal
Station Count
XXXX
1000
1000-E
Communication
XXX
M—Wireline
DR—Radio
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 33
33
3/6/19 1:20 PM
SPRINKLERS AND SUBSURFACE DRIP IRRIGATION
Model
INF35-6/
INF55-6
INF35/
INF55
INF34/
INF54
FLX35-6/
FLX55-6
FLX35/
FLX55
FLX34/
FLX54
Catalog Pages
Radius
Short Radius (mainless)
Radius Reduction Screw
36-39
42’-100’
25’-51’
40-43
43’-92’
25’-50’
X
44-47
52’-99’
52-55
42’-100’
25’-51’
56-59
43’-92’
25’-50’
Optional
60-63
52’-99’
X Optional
Back Nozzle Capable X X X X
Inlet Size 1” & 1½” ACME 1” & 1½” ACME 1” & 1½” ACME 1” & 1½” ACME 1” & 1½” ACME 1” & 1½” ACME
Below Grade Capable
Grade Height Adjustable
Turf
High Wind
LSM 2-wire Systems
Normally Open
Hydraulic System
Spike Guard ™ Solenoid
Full Circle
Part-circle Adjustable
Part/Full Circle In One
Ratcheting Riser
Check Valve
Effluent Water Option
Trajectory Adjustment
Nozzle Base Clutching
SMART ACCESS ®
Compartment
SMART ACCESS ® Cover
Removable Marker
Pilot Valve Serviceable
Under Pressure
Stealth-T
Razor
X
X
X
X
X
X
40˚-330˚
& 360˚
X
X
7˚-30˚
X
X
X
X
X
Stealth-D
Razor
X
X
X
X
X
X
40˚-330˚
& 360˚
X
X
25˚ & 15˚
X
X
X
X
X
Stealth-D
Razor
X
X
X
X
X
X
25˚ & 15˚
X
X
X
X
X
X
X
X
X
X
X
1
40˚-330˚
& 360˚
X
X
X
7˚-30˚
X
X
X
X
X
X
X
X
1
40˚-330˚
& 360˚
X
X
X
25˚ & 15˚
X
X
X
X
X
X
X
X
X
1
25˚ & 15˚
Warranty
3 Years/
5 Years*
3 Years/
5 Years*
3 Years/
5 Years*
3 Years/
5 Years*
3 Years/
5 Years*
3 Years/
5 Years*
*When purchased and installed with Toro Swing Joints.
X 1 –Complete sprinkler requires the purchase and assembly of riserless bodies and conversions.
# NPT and BSP models available as riserless bodies only.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 34 3/6/19 1:21 PM
Catalog Pages
Radius
Short Radius (mainless)
Radius Reduction Screw
Back Nozzle Capable
Inlet Size
Flow Range
Recommended
Operating Pressure
Turf
High Wind
Low Pressure
Normally Open
Hydraulic System
Full Circle
Part-circle Adjustable
Part-circle Fixed
Part/Full Circle In One
Ratcheting Riser
Check Valve
Effluent Water Option
Model FLEX800 B SERIES
64-67
25’-95’
X
Optional
X
1” NPT, BSP,
ACME
7.1-56.3 gpm
Trajectory Adjustment
Warranty
50-100 psi
X
X
X
X
40˚-330˚ & 360˚
FLX35-6B/FLX35B
X
X
7˚-30˚/
25˚ & 15˚
3 Years/
5 Years*
T7 Rotor
74-75
Low-flow: 38’–56’
High-flow: 46’–75’
X
X
1” ACME
Low-flow: 1.7–12.7 gpm
High-flow: 6.8–30.5 gpm
40-100 psi
X
X
X
X
X
X
X
5 Years
690
76-77
87’-108’
1½” NPT
51.0-82.2 gpm
80-100 psi
X
X
X
1 and 2 Speed
90˚ and 180˚
X
X
X
X
X
X
X
X
3 Years/5 Years* 3 Years
*When purchased and installed with Toro Swing Joints.
590GF
78-79
2'-26
X
X
1/2” NPT
.05-4.5 gpm
20-50 psi
X
X
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 35 3/6/19 1:21 PM
INFINITY
®
35-6/55-6 SERIES GOLF ROTORS
36
With the industry’s largest selection of high performance nozzles and TruJectory ™ adjustment the INFINTY
35-6/55-6 Series with SMART ACCESS ® allows you to put water precisely where you want it for maximum distribution uniformity. And the part/full circle drive and ratcheting riser allows you to simply and economically adjust the area of coverage to match your seasonal watering needs or meet water rationing mandates in seconds with no disassembly or additional parts required.
FEATURES & BENEFITS
Industry's Largest Nozzle Selection
Nozzles from 25’ to 100’ radius plus a wide assortment of back nozzles lets you put the precise amount of water exactly where you need it. All color coded and debris tolerant nozzles threaded in from the front.
Hot Spot Watering
Nozzle base can be turned in either direction and held to put down as much water as needed, precisely where you want it. Standard on all Toro part circle golf rotors!
Adjustment With No Disassembly
A Toro original, simply pull up the riser and ratchet it to the precise position you want to water.
True Part and Full-Circle in One
(40° - 330° part circle)
These sprinklers can be full circle today and part circle tomorrow allowing you to simply and economically adjust the area of coverage to match your seasonal needs or meet water rationing mandates.
Eliminates sprinkler interference
Enhances course appearance
INFINITY® SERIES DISTANCE MARKERS
Set your course apart with Toro's unique, customizable distance markers
• White (118-6234) and Yellow (118-6235) color options provide excellent visibility
• Customizable with any graphic image
• Multiple number and orientation options available
• Any font style
• Easy snap-in installation into any INFINITY golf sprinkler
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 36 3/6/19 1:21 PM
Smart Access ®
Provides top accessibility to all critical components.
No digging or unsightly turf repair scars
No buried wire splices or ground faults
Pilot valve removable with water “ON”
Lower long term cost of ownership
Customizable marker
Replaceable cover if damaged
Increased labor efficiency
30°
7°
Trajectory – 24 Positions
From 7° - 30° in 1° increments put water where you want it. Adjust from the top of the sprinkler in seconds, wet or dry.
This flexibility lets you tackle every obstacle on the course; wind, trees, bunkers, mounds and more.
INF35-6 CONVERSION UPGRADES
MODELS DESCRIPTION
• INF35-6-3134
• INF35-6-3537
• INF35-6-3134E
• INF35-6-3537E
INF35-6 w/31–34 Nozzles
(33 Nozzle Installed)
INF35-6 w/35–37 Nozzles
(35 Nozzle Installed)
INF35-6 w/31–34 Nozzles
(33 Nozzle Installed), Effluent
INF35-6 w/35–37 Nozzles
(35 Nozzle Installed), Effluent
INF55-6 CONVERSION UPGRADES
MODELS DESCRIPTION
• INF55-6-5154
• INF55-6-5558
• INF55-6-59
• INF55-6-5154E
• INF55-6-5558E
• INF55-6-59E
INF55-6 w/51–54 Nozzles
(53 Nozzle Installed)
INF55-6 w/55–58 Nozzles
(55 Nozzle Installed)
INF55-6 w/59 Nozzle Installed
INF55-6 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
INF55-6 w/55–58 Nozzles
(55 Nozzle Installed), Effluent
INF55-6 w/59 Nozzle Installed Effluent
SPECIFICATIONS
Operational
• Inlet:
- INF35-6: 1” ACME
- INF55-6: 1½” ACME
• Radius:
- INF35-6: 42’ – 92’
- INF55-6: 52’ – 100’
• Flow Rate:
- INF35-6: 7.1 – 45.3 gpm
- INF55-6: 13.9 - 61.1 gpm
• Precipitation Rates:
- INF35-6: Minimum - .37”/hr;
Maximum - .53”/hr
- INF55-6: Minimum - .43”/hr;
Maximum - .60”/hr
• Pilot Valve: Selectable at 50, 65,
80 and 100 psi
• Recommended Operating
Pressure Range: 65-100 psi
(maximum -150 psi and minimum - 40 psi)
• Activation types – Electric
Valve-in-Head: n 24 VAC, 50/60 Hz n
Inrush: 0.30 A n Holding 0.20 A
- Spike Guard Solenoid: n
24 VAC, 50/60 Hz n Inrush: 0.12 A n
Holding 0.10 A
- Nickel-Plated Spike Guard
Solenoid: n
24 VAC, 50/60 Hz n Inrush: 0.12 A n
Holding 0.10 A
- DC Latching Solenoid (DCLS): n
Momentary low voltage pulse
- Integrated Lynx Smart
Module with DCLS: n
Momentary low voltage pulse
• Trajectory: 24 positions from 7°
- 30° in 1° increments
Additional Features
• INF35-6 has eight nozzle
variations (30, 31, 32, 33,
34, 35, 36 and 37)
• INF55-6 has nine nozzle
variations (51, 52, 53, 54,
55, 56, 57, 58 and 59)
• Four in-line nozzles,
rotating stream pattern
• One back nozzle position
• Stator variations: INF35-6 – 3
and INF55-6 – 3
• Ratcheting riser
• Nozzle base clutching
Dimensions
• SMART ACCESS® Cover and
Compartment Diameter:
- INF35-6: 7 5 /
8
”
- INF55-6: 7 5 /
8
”
• Body height:
- INF35-6: 10”
- INF55-6: 11 3 /
8
”
• Weight:
- INF35-6: 4.31 lbs.
- INF55-6: 5.13 lbs.
• Weight – Intergrated with
Lynx Smart Module:
- INF35-6: 5.00 lbs.
- INF55-6: 5.82 lbs.
• Pop-up height to nozzle: 3¼”
Warranty
• Three years
• Five years when installed with Toro Swing Joints
Body
Inlet
INF X
3—1"
5—1 1 ⁄
2
"
Arc
5
5—Part-circle and
Full-circle
In One
Specifying Information—INFINITY 35-6 & INFINITY 55-6
Nozzle
X X
INF35 —30, 31, 32, 33, 34, 35, 36, 37
INF55 —51, 52, 53, 54, 55, 56, 57, 58, 59
INF X 5XXX X 6X
Pressure
Regulation*
X
6—65 psi
8—80 psi
1—100 psi
Activation Type
X
1—Standard Solenoid
2—Spike Guard ™ Solenoid
3—Nickel-plated Spike Guard Solenoid
4—DC Latching Solenoid (DCLS)
6—Integrated Lynx Smart Module w/DCLS
Trajectory
6
6—24-position
TruJectory
Optional
X
7—Effluent
Example: When specifying an INF35-6 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard you would specify: INF35-346-26
Note: Not all models available. * All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 37
37
3/6/19 1:21 PM
INFINITY ® 35-6/55-6 SERIES GOLF ROTORS
B
C
A
INFINITY 35-6 TRAJECTORY PERFORMANCE
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
46'
4'
#31 Nozzle @ 65 psi, 15.5 gpm
10°
46'
4'
15°
50'
5'
20°
53'
8'
25°
54'
11'
30°
50'
13'
7°
46'
3'
#32 Nozzle @ 65 psi, 20.5 gpm
10°
49'
4'
15°
51'
6'
20°
55'
9'
25°
63'
12'
30°
54'
15'
7°
54'
4'
#33 Nozzle @ 65 psi, 22.9 gpm
10°
56'
5'
15°
59'
7'
20°
62'
9'
25°
66'
13'
30°
61'
15'
"C" Distance from Head 25' 25' 26' 33' 33' 33' 20' 24' 28' 34' 34' 34' 23' 28' 32' 34' 35' 35'
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
58'
4'
#34 Nozzle @ 65 psi, 30.0 gpm
10°
60'
4'
15°
63'
6'
20°
67'
11'
25°
74'
14'
30°
70'
17'
7°
59'
4'
#35 Nozzle @ 65 psi, 32.4 gpm
10°
61'
5'
15°
64'
7'
20°
70'
11'
25°
76'
15'
30°
74'
17'
7°
64'
5'
#36 Nozzle @ 80 psi, 34.0 gpm
10°
68'
7'
15°
76'
9'
20°
80'
14'
25°
84'
17'
30°
82'
22'
"C" Distance from Head 24' 26' 35' 39' 39' 39' 30' 32' 36' 43' 43' 43' 25' 38' 40' 45' 49' 45'
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
65'
5'
#37 Nozzle @ 80 psi, 39.8 gpm
10°
69'
7'
15°
78'
9'
20°
82'
14'
25°
86'
18'
30°
84'
22'
"C" Distance from Head 30' 39' 41' 46' 50' 46'
INFINITY 55-6 TRAJECTORY PERFORMANCE
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
46'
4'
#51 Nozzle @65 psi, 15.7 gpm
10°
46'
4'
15°
51'
6'
20°
53'
10'
25°
54'
13'
30°
50'
15'
7°
49'
4'
#52 Nozzle @65 psi, 20.8 gpm
10°
50'
4'
15°
51'
6'
20°
55'
9'
25°
64'
11'
30°
65'
13'
7°
54'
5'
#53 Nozzle @65 psi, 23.4 gpm
10°
56'
6'
15°
59'
7'
20°
62'
9'
25°
68'
13'
30°
61'
15'
"C" Distance from Head 26' 27' 32' 38' 40' 41' 22' 26' 31' 35' 34' 30' 30' 33' 32' 35' 37' 37'
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
58'
5'
#54 Nozzle @ 65 psi, 31.2 gpm
10°
60'
6'
15°
63'
8'
20°
67'
10'
25°
74'
15'
30°
70'
17'
7°
59'
6'
#55 Nozzle @ 65 psi, 33.8 gpm
10°
62'
6'
15°
66'
9'
20°
70'
11'
25°
76'
15'
30°
77'
17'
7°
72'
5'
#56 Nozzle @ 80 psi, 35.7 gpm
10°
73'
7'
15°
75'
9'
20°
82'
14'
25°
85'
17'
30°
82'
22'
"C" Distance from Head 31' 34' 40' 41' 41' 42' 34' 36' 43' 45' 45' 45' 25' 38' 40' 45' 49' 45'
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
72'
5'
#57 Nozzle @ 80 psi, 41.9 gpm
10°
74'
7'
15°
77'
9'
20°
83'
14'
25°
89'
18'
30°
85'
22'
7°
75'
6'
#58 Nozzle @ 80 psi, 46.2 gpm
10°
77'
7'
15°
83'
10'
20°
87'
15'
25°
92'
18'
30°
88'
22'
7°
77'
7'
#59 Nozzle @ 80 psi, 53.3 gpm
10°
78'
8'
15°
84'
11'
20°
89'
16'
25°
96'
21'
30°
92'
25'
"C" Distance from Head 30' 39' 41' 46' 50' 46' 38' 40' 43' 47' 52' 48' 42' 44' 45' 47' 53' 49'
Information is for reference only. Actual results may vary.
38
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 38 3/6/19 1:21 PM
INFINITY ® 35-6/55-6 SERIES GOLF ROTORS
INFINITY 35-6 SERIES PERFORMANCE CHART
Nozzle Set 30 Nozzle Set 31 Nozzle Set 32
Base
Pressure
(White)
102-2208
(Yellow)
102-4587
(Blue)
102-4588
Nozzle Set 33
(Brown)
102-4589
Nozzle Set 34
(Orange)
102-0728
Nozzle Set 35
(Green)
102-0729
Nozzle Set 36
(Gray)
102-0730
Nozzle Set 37
(Black)
102-4261
Blue Gray Blue Gray Red Gray Orange Gray Orange Gray Blue Gray Blue Gray Orange Gray
102-2925 102-2910 102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910
Back
Nozzle
Positions
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 psi
50
65
80
100
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
42 7.1
52 13.7
61 17.1
64 20.2
69 27.4
— — — — — —
45
46
8.7
9.6
54
57
15.5
17.0
63
67
20.5
22.6
66
70
22.9
25.3
74
77
30.0
33.2
76
79
32.4
35.8
—
84
—
37.5
—
86
—
40.8
48 11.2
Stator 102-6929 Blue
Conversions
59 18.9
72 25.2
74
102-1939 Yellow
INF35-6-3134
28.2
80 37.0
84 39.9
88 42.5
102-1940 White
INF35-6-3537
92 45.3
INFINITY 55-6 SERIES PERFORMANCE CHART
Nozzle Set 51 Nozzle Set 52 Nozzle Set 53 Nozzle Set 54 Nozzle Set 55 Nozzle Set 56 Nozzle Set 57 Nozzle Set 58 Nozzle Set 59
Base
Pressure
(Yellow)
102-4587
(Blue)
102-4588
(Brown)
102-4589
(Orange)
102-0728
(Green)
102-0729
(Gray)
102-0730
(Black)
102-4261
(Red)
102-4260
(Beige)
102-4259
Blue Gray Red Gray Orange Gray Orange Gray Blue Gray Blue Gray Orange Gray Blue Gray Blue Gray
102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910
Back
Nozzle
Positions psi
50
65
80
100
Stator
Conver.
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
52 13.9
62 17.4
66 20.7
69 28.6
— — — — — — — — — —
54
57
59
15.7
17.2
19.1
64
68
73
20.8
22.9
25.5
68
72
76
102-1939 Yellow
23.4
25.8
28.7
74
77
80
31.2
34.4
38.2
76
79
84
33.8
37.2
41.3
—
85
89
—
39.4
43.7
—
89
94
102-1940 White
—
43.6
48.5
—
92
95
—
47.5
51.1
—
96
100
—
57.0
61.1
102-1941
INF55-6-5154 INF55-6-5558 INF55-6-59
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
" swing joint at flows over 25-gpm (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Main Nozzle Adapter
A wide assortment of intermediate and inner nozzles for use in the main nozzle adapter and back nozzle position provide unmatched nozzle flexibility.
Note: Main Nozzle Adapter Data Located on Page 68. Back Nozzle Data Located on Page 73.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 39
39
3/6/19 1:21 PM
INFINITY
®
35/55 SERIES GOLF ROTORS
The INFINITY 35/55 Series with SMART ACCESS ® features a dual trajectory main nozzle that provides exceptional nozzle performance at the 25° standard angle position and great performance in windy applications at the 15° low angle position. And the part/full circle drive and ratcheting riser allows you to adjust the area of coverage to match your seasonal watering needs or meet water rationing mandates in seconds with no additional parts required.
40
FEATURES & BENEFITS
Industry's Largest Nozzle Selection
Nozzles from 25’ to 92’ radius plus a wide assortment of back nozzles lets you put the precise amount of water exactly where you need it. All nozzles threaded in from front.
Stainless Steel Valve Seat
Eliminates body damage from rocks and debris. This indestructible stainless steel seat is molded to the body and virtually eliminates body replacements due to seat damage.
Standard on all Toro Golf rotors!
Radius Reduction Screw
Allows for fine tuning the radius to exactly the distance you need.
In combination with main nozzle sizing and trajectory adjustment the radius reduction screw can effectively reduce the sprinkler throw down to 30’.
True Part and Full-Circle in One
(40° - 330° part circle)
These sprinklers can be full circle today and part circle tomorrow allowing you to adjust the area of coverage to match your seasonal needs or meet water rationing mandates.
Eliminates sprinkler interference
Enhances course appearance
INFINITY® SERIES DISTANCE MARKERS
Set your course apart with Toro's unique, customizable distance markers
• White (118-6234) and Yellow (118-6235) color options provide excellent visibility
• Customizable with any graphic image
• Multiple number and orientation options available
• Any font style
• Easy snap-in installation into any INFINITY golf sprinkler
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 40 3/6/19 1:21 PM
Smart Access ®
Provides top accessibility to all critical components.
No digging or unsightly turf repair scars
No buried wire splices or ground faults
Pilot valve removable with water “ON”
Lower long term cost of ownership
Customizable marker
Replaceable cover if damaged
Increased labor efficiency
25°
OR
15°
Dual Trajectory
The 25° setting provides maximum distance of throw and the 15° setting provides improved wind performance, radius reduction and obstacle avoidance.
INF35 CONVERSION UPGRADES
MODELS DESCRIPTION
• INF35-3134
• INF35-3537
• INF35-3134E
• INF35-3537E
INF35 w/31–34 Nozzles
(#3 Nozzle Installed)
INF35 w/35–37 Nozzles
(#5 Nozzle Installed)
INF35 w/31–34 Nozzles
(#3 Nozzle Installed), Effluent
INF35 w/35–37 Nozzles
(#5 Nozzle Installed), Effluent
INF55 CONVERSION UPGRADES
MODELS
• INF55-5154
• INF55-5558
• INF55-59
• INF55-5154E
• INF55-5558E
• INF55-59E
DESCRIPTION
INF55 w/51–54 Nozzles
(#3 Nozzle Installed)
INF55 w/55–58 Nozzles
(#5 Nozzle Installed)
INF55 w/59 Nozzle
INF55 w/51–54 Nozzles
(#3 Nozzle Installed), Effluent
INF55 w/55–58 Nozzles
(#5 Nozzle Installed), Effluent
INF55 w/59 Nozzle, Effluent
SPECIFICATIONS
Operational
• Inlet:
- INF35: 1” ACME
- INF55: 1½” ACME
• Radius:
- INF35: 43’ – 83’
- INF55: 55’ – 92’
• Flow Rate:
- INF35: 8.2 – 47.3 gpm
- INF55: 14.1 – 61.3 gpm
• Precipitation Rates:
- INF35: Minimum - .41”/hr;
Maximum - .45”/hr
- INF55: Minimum - .46”/hr;
Maximum - .58”/hr
• Pilot Valve: Selectable at 50, 65,
80 and 100 psi
• Recommended Operating
Pressure Range: 65-100 psi
(maximum – 150 psi and
minimum – 40 psi)
• Activation types – Electric
Valve-in-Head:
- Standard Solenoid: n
24 VAC, 50/60 Hz n
Inrush: 0.30 A n Holding 0.20 A
- Spike Guard Solenoid: n 24 VAC, 50/60 Hz n Inrush: 0.12 A n
Holding 0.10 A
- Nickel-Plated Spike Guard
Solenoid: n
24 VAC, 50/60 Hz n Inrush: 0.12 A n
Holding 0.10 A
- DC Latching Solenoid (DCLS): n
Momentary low voltage pulse
- Integrated Lynx Smart Module
w/DCLS: n
Momentary low voltage pulse
Additional Features
• INF35 has eight nozzle variations (30, 31, 32, 33, 34,
35, 36 & 37)
• INF55 has nine nozzle variations (51, 52, 53, 54, 55,
56, 57, 58 & 59)
• Three in-line nozzles, rotating stream pattern
• Two back nozzle positions
• Stator variations: 3
• Radius reduction screw 363-
4839 for fine tuning
• Ratcheting riser
• Nozzle base clutching
Dimensions
• SMART ACCESS ® Cover and
Compartment Diameter:
- INF35: 7 5 /
8
”
- INF55: 7 5 /
8
”
• Body height:
- INF35: 10”
- INF55: 11 3 /
8
”
• Weight:
- INF35: 4.26 lbs.
- INF55: 5.08 lbs.
• Weight – Intergrated with
Lynx Smart Module:
- INF35: 4.95 lbs.
- INF55: 5.71 lbs.
• Pop-up height to nozzle: 3¼”
Warranty
• Three years
• Five years when installed with Toro Swing Joints
Body
Inlet
INF X
3—1"
5—1 1 ⁄ 2 "
Arc
5
5—Part-circle and
Full-circle
In One
Specifying Information—INFINITY 35 & INFINITY 55
Nozzle
X X
INF35 —30, 31, 32, 33, 34, 35, 36, 37
INF55 —51, 52, 53, 54, 55, 56, 57, 58, 59
INF X 5XXX XX
Pressure
Regulation*
6—65 psi
8—80 psi
1—100 psi
X
Activation Type
X
1—Standard Solenoid
2—Spike Guard™ Solenoid
3—Nickel-plated Spike Guard Solenoid
4—DC Latching Solenoid (DCLS)
6—Integrated Lynx Smart Module w/DCLS
Optional
X
7—Effluent
Example: When specifying an INF35 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard you would specify: INF35–346–2
Note: Not all models available. * All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 41
41
3/6/19 1:21 PM
INFINITY ® 35/55 SERIES GOLF ROTORS
INFINITY 35 SERIES PERFORMANCE CHART—25°
Nozzle Set 30 Nozzle Set 31 Nozzle Set 32
Front
Nozzle
Positions
(White Plug)
102-2208
(Yellow)
102-6906
(Blue)
102-0726
Nozzle Set 33
(Brown)
102-6907
Nozzle Set 34 Nozzle Set 35
(Orange)
102-0728
(Green)
102-6955
Nozzle Set 36 Nozzle Set 37
(Gray)
102-6935
(Black)
102-6936
Yellow Beige Yellow Brown Yellow Yellow Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green
102-5670 102-6942 102-5670 102-5671 102-5670 102-6884 102-5670 102-6884 102-5670 102-6884 102-5670 102-6885 102-6531 102-6885 102-6531 102-6885
Back
Nozzle
Positions psi
50
65
80
100
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
43
45
46
8.2
10.0
11.5
53
53
57
13.8
15.5
17.3
56
59
62
18.3
20.5
22.7
61
64
67
21.7
24.4
27.1
65
68
71
25.3
28.2
31.1
—
72
75
—
34.1
37.8
—
—
78
—
—
40.3
—
—
80
—
—
44.0
47 13.4
59 19.1
65 24.9
70 29.8
74 34.1
79 40.9
81 43.8
83 47.3
INFINITY 35 SERIES PERFORMANCE CHART—15° psi
50
65
80
100
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
43 8.2
52 13.6
58 18.1
61 21.5
62 25.6
— — — — — —
45
46
10.0
11.5
54
58
15.3
17.2
60
64
20.3
22.6
64
69
24.2
26.8
65
69
27.3
30.2
69
75
33.1
36.8
—
76
—
39.7
—
76
—
42.9
47 13.4
Stator 102-6929 Blue
Conversions
60 19.0
66 24.7
71
102-1939 Yellow
INF35-3134
29.5
72 32.9
78 39.5
82 42.6
102-1940 White
INF35-3537
82 46.1
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
" swing joint at flows over 25-Gpm (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
INFINITY 35 NOZZLE APEX
Pressure Nozzle
65 psi
80 psi
35
36
37
31
32
33
34
Apex at 15˚
6’ @ 51’
6’ @ 51’
7’ @ 59’
8’ @ 63’
9’ @ 66’
8’ @ 75’
9’ @ 74’
Apex at 25°
13’ @ 54’
11’ @ 64’
13’ @ 68’
15’ @ 74’
15’ @ 76’
18’ @ 83’
19’ @ 82’
42
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 42 3/6/19 1:21 PM
INFINITY ® 35/55 SERIES GOLF ROTORS
INFINITY 55 SERIES PERFORMANCE CHART—25°
Nozzle Set 51 Nozzle Set 52 Nozzle Set 53 Nozzle Set 54 Nozzle Set 55 Nozzle Set 56 Nozzle Set 57 Nozzle Set 58 Nozzle Set 59
Front
Nozzle
Positions
(Yellow)
102-6906
(Blue)
102-0726
(Brown)
102-6907
(Orange)
102-0728
(Green)
102-6955
(Gray)
102-6935
(Black)
102-6936
(Red)
102-6909
(Beige)
102-4259
Yellow Brown Yellow Yellow Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green Green Green Green Green
102-5670 102-5671 102-5670 102-6884 102-5670 102-6884 102-5670 102-6884 102-5670 102-6885 102-6531 102-6885 102-6531 102-6885 102-6531 102-6885 102-6531 102-6885
Back
Nozzle
Positions
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 psi
50
65
80
100
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
55
57
59
61
14.1
15.8
17.5
19.3
57
60
61
63
18.5
20.9
23.1
25.3
62
65
68
71
22.3
25.1
27.8
30.3
66
69
72
75
25.8
28.7
31.7
34.5
—
73
76
80
—
35.9
39.7
43.5
—
—
80
83
—
—
43.1
49.0
—
—
83
88
—
—
48.2
51.5
—
—
85
90
—
—
50.0
53.9
—
—
89
92
—
—
57.5
61.3
INFINITY 55 SERIES PERFORMANCE CHART—15° psi Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
50 55 14.0
59 16.5
62 22.2
63 25.6
— — — — — — — — — —
65
80
56
59
15.6
17.4
62
66
20.7
23.0
65
69
25.0
27.7
66
70
28.5
31.5
75
78
35.3
39.0
—
78
—
42.4
—
79
—
46.9
—
79
—
49.5
—
82
—
57.2
100
Stator
Conversions
60 19.2
68 25.1
71
102-1939 Yellow
INF35-3134
30.2
72 34.3
80 41.9
81 47.2
83
102-1940 White
INF35-3537
52.1
83 53.4
85 60.8
102-1941 White
INF55-59
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
" swing joint at flows over 25-gpm (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
INFINITY 55 NOZZLE APEX
Pressure Nozzle
51
65 psi
52
53
80 psi
54
55
56
57
58
59
Apex at 15˚
6’ @ 51’
6’ @ 51’
7’ @ 59’
8’ @ 63’
9’ @ 66’
8’ @ 75’
9’ @ 74’
10’ @ 82’
11’ @ 81’
Apex at 25°
13’ @ 54’
11’ @ 64’
13’ @ 68’
15’ @ 74’
15’ @ 76’
18’ @ 83’
19’ @ 82’
18’ @ 87’
21’ @ 91’
Note: Main Nozzle Adapter Data Located on Page 68. Back Nozzle Data Located on Page 73.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 43
43
3/6/19 1:21 PM
INFINITY
®
34/54 SERIES GOLF ROTORS
The INFINITY 34/54 is Toro’s Premium full-circle golf sprinkler series with SMART ACCESS ® . The dual trajectory main nozzle provides exceptional nozzle performance at the 25° standard angle position and great performance in windy applications at the 15° low angle position. And the consistency of the constant velocity full circle drive ensures even water application across the coverage area every time you water.
FEATURES & BENEFITS
Industry's Largest Nozzle Selection
Nozzles from 52’ to 100’. Color coded for easy flow and radius identification and threaded from the front to simplify servicing.
Constant Velocity Full Circle Drive
Ensures consistent rotation speeds when matched with station run times for even water application across the coverage area every time you water.
Radius Reduction Screw for Fine Tuning
In combination with main nozzle sizing and trajectory adjustment the radius reduction screw can effectively reduce the sprinkler throw down to 30’.
Five Activation Types
Standard solenoid
Spike Guard ™ solenoid
Nickel plated Spike Guard solenoid
DC Latching Solenoid (DCLS)
Integrated LSM module with DCLS
Available on all INFINITY models!
Eliminates sprinkler interference
Enhances course appearance
INFINITY® SERIES DISTANCE MARKERS
Set your course apart with Toro's unique, customizable distance markers
• White (118-6234) and Yellow (118-6235) color options provide excellent visibility
• Customizable with any graphic image
• Multiple number and orientation options available
• Any font style
• Easy snap-in installation into any INFINITY golf sprinkler
44
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 44 3/6/19 1:21 PM
Smart Access ®
Provides top accessibility to all critical components.
No digging or unsightly turf repair scars
No buried wire splices or ground faults
Pilot valve removable with water “ON”
Lower long term cost of ownership
Customizable marker
Replaceable cover if damaged
Increased labor efficiency
25°
15°
Dual Trajectory - 25° or 15°
Provides two selections for the main nozzle trajectory; the 25 degree setting provides maximum distance of throw and the 15 degree setting provides improved wind performance, radius reduction and obstacle avoidance.
INF34 CONVERSION UPGRADES
MODELS DESCRIPTION
• INF34-3134
• INF34-3537
• INF34-3134E
• INF34-3537
INF34 w/31–34 Nozzles
(33 Nozzle Installed)
INF34 w/35–37 Nozzles
(35 Nozzle Installed)
INF34 w/31–34 Nozzles
(33 Nozzle Installed), Effluent
INF34 w/35–37 Nozzles
(35 Nozzle Installed), Effluent
INF54 CONVERSION UPGRADES
MODELS DESCRIPTION
• INF54-5154
• INF54-5558
• INF54-59
• INF54-5154E
• INF54-5558E
• INF54-59E
• 102-5011
• 102-0950
INF54 w/51–54 Nozzles
(53 Nozzle Installed)
INF54 w/55–58 Nozzles
(55 Nozzle Installed)
INF54 w/59 Nozzle Installed
INF54 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
INF54 w/55–58 Nozzles
(55 Nozzle Installed), Effluent
INF54 w/59 Nozzle Installed Effluent
690 Adapter allows you to upgrade any 690 with FLX54 conversions
Required to upgrade all
1.5” Series Sprinklers (650,
670, 680, 750, and 780)
SPECIFICATIONS
Features
• Dual Trajectory adjustment on main nozzle - 25° or 15°
• Constant velocity full circle drive
• Radius reduction screw can effectively reduce the sprinkler throw down to 30’
Operational
• Inlet:
- INF34: 1” ACME
- INF54: 1½” ACME
• Radius:
- INF34: 52’ – 91’
- INF54: 52’ – 99’
• Flow Rate:
- INF34: 13.0 – 46.9 gpm
- INF54: 13.2 - 61.8 gpm
• Precipitation Rates:
- INF34: Minimum - .33”/hr;
Maximum - .55”/hr
- INF54: Minimum - .33”/hr;
Maximum - .61”/hr
• Pilot Valve: Selectable at 50, 65,
80 and 100 psi
• Recommended Operating
Pressure Range: 65-100 psi
(maximum-150 psi and
minimum-40 psi)
• Activation types – Electric
Valve-in-Head:
- Standard Solenoid: n
24 VAC, 50/60 Hz n Inrush: 0.30 A n
Holding 0.20 A
- Spike Guard Solenoid: n 24 VAC, 50/60 Hz n
Inrush: 0.12 A n Holding 0.10 A
- Nickel-Plated Spike Guard
Solenoid: n 24 VAC, 50/60 Hz n
Inrush: 0.12 A n Holding 0.10 A
- DC Latching Solenoid (DCLS): n
Momentary low voltage pulse
- Integrated Lynx Smart Module w/DCLS: n Momentary low voltage pulse
• Trajectory: 25° or 15°
Dimensions
• SMART ACCESS® Cover and
Compartment Diameter:
- INF34: 7 5 /
8
”
- INF54: 7 5 /
8
”
• Body height:
- INF34: 10”
- INF54: 11 3 /
8
”
• Weight:
- INF34: 4.22 lbs.
- INF54: 5.04 lbs.
• Weight – Intergrated with
Lynx Smart Module:
- INF35: 4.95 lbs.
- INF55: 5.71 lbs.
• Pop-up height to nozzle: 3¼”
Warranty
• Three years
• Five years when installed with Toro Swing Joints
Body
Inlet
INF X
3—1"
5—1 1 ⁄
2
"
Arc
4
4—Full Circle
Specifying Information—INFINITY 34 & INFINITY 54
Nozzle
X X
INF34 —31, 32, 33, 34, 35, 36, 37
INF54 —51, 52, 53, 54, 55, 56, 57, 58, 59
INF X 4 -XXX-X-X
Pressure
Regulation*
6—65 psi
8—80 psi
1—100 psi
X
Activation Type
X
1—Standard Solenoid
2—Spike Guard™ Solenoid
3—Nickel-plated Spike Guard Solenoid
4—DC Latching Solenoid (DCLS)
6—Integrated Lynx Smart Module w/DCLS
Optional
X
7—Effluent
Example: When specifying an INF34 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard you would specify: INF34–346–2
Note: Not all models available. * All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 45
45
3/6/19 1:21 PM
INFINITY ® 34/54 SERIES GOLF ROTORS
INFINITY 34 SERIES PERFORMANCE CHART—25°
Nozzle Set 31 Nozzle Set 32 Nozzle Set 33
Front
Nozzle
Positions
(Yellow)
102-0725
(Blue)
102-7001
(Brown)
102-0727
Nozzle Set 34
(Orange)
102-7002
Nozzle Set 35
(Green)
102-6908
Nozzle Set 36
(Gray)
102-0730
Nozzle Set 37
(Black)
102-4261
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Brown
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-6883
Back
Nozzle
Positions psi
50
65
80
100
Yellow Blue Yellow Orange Yellow Red Yellow Beige Yellow Beige Yellow Red Yellow Gray
102-6937 102-2925 102-6937 102-2926 102-6937 102-2928 102-6937 102-2929 102-6937 102-2929 102-6937 102-6944 102-6937 102-6945
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
57
58
60
62
13.0
14.6
16.2
17.9
58
60
63
66
15.5
18.0
20.5
23.4
64
68
72
75
21.9
24.4
26.9
29.8
68
72
76
79
24.4
28.1
31.1
34.9
—
76
80
84
—
32.2
35.6
49.3
—
—
83
88
—
—
38.2
43.4
—
—
85
91
—
—
41.5
46.9
INFINITY 34 SERIES PERFORMANCE CHART—15° psi
50
65
80
100
Stator
Conversions
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
52 12.9
53 15.6
60 21.7
62 25.5
— — — — — —
53
56
14.4
16.0
54
57
17.1
19.0
61
65
24.2
26.6
64
69
28.0
31.0
67
73
32.1
35.5
—
76
—
38.0
—
77
—
41.3
57 17.5
59 29.5
71 33.9
75 38.4
81 46.8
20.5
67
102-6929 Blue
INF34-3134
80 43.1
102-1940 White
INF34-3537
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
" swing joint at flows over 25-gpm (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
INFINITY 34 NOZZLE APEX
Pressure Nozzle
31
65 psi
32
33
80 psi
34
35
36
37
Apex at 15˚
6’ @ 51’
6’ @ 51’
7’ @ 59’
8’ @ 63’
9’ @ 66’
8’ @ 75’
9’ @ 74’
Apex at 25°
13’ @ 54’
11’ @ 64’
13’ @ 68’
15’ @ 74’
15’ @ 76’
18’ @ 83’
19’ @ 82’
46
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 46 3/6/19 1:21 PM
INFINITY ® 34/54 SERIES GOLF ROTORS
INFINITY 54 SERIES PERFORMANCE CHART—25°
Nozzle Set 51 Nozzle Set 52 Nozzle Set 53 Nozzle Set 54 Nozzle Set 55 Nozzle Set 56 Nozzle Set 57 Nozzle Set 58 Nozzle Set 59
Front
Nozzle
Positions
(Yellow)
102-0725
(Blue)
102-7001
(Brown)
102-0727
(Orange)
102-7002
(Green)
102-6908
(Gray)
102-0730
(Black)
102-4261
(Red)
102-4260
(Beige)
102-4259
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Brown Red Plug Brown Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-6883 102-4335 102-6883 102-4335 102-4335
Back
Nozzle
Positions psi
50
65
80
100
Yellow Blue Yellow Orange Yellow Red Yellow Beige Yellow Beige Yellow Red Yellow Gray Yellow Gray Yellow Gray
102-6937 102-2925 102-6937 102-2926 102-6937 102-2928 102-6937 102-2929 102-6937 102-2929 102-6937 102-6944 102-6937 102-6945 102-6937 102-6945 102-6937 102-6945
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
58 13.2
59 15.7
64 22.0
70 26.2
— —
60 14.8
61 17.5
68 24.8
74 29.3
79 34.2
—
—
—
—
—
—
—
—
—
—
—
—
61 16.4
64 20.0
72 27.6
78 32.6
83 38.0
85 40.7
87 44.9
91 50.2
63 18.1
67 23.6
75 30.4
81 36.7
87 42.5
90 45.8
93 50.2
95 55.4
—
—
96
99
—
—
55.6
61.8
INFINITY 54 SERIES PERFORMANCE CHART—15° psi
50
65
80
100
Stator
Conversions
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
52 13.2
53 15.6
61 22.0
65 26.0
— — — — — — — — — —
53 14.8
54 17.1
63 24.8
67 29.2
69 34.1
— — — — — —
56 16.4
58 19.0
68 27.6
72 32.5
75 37.8
79 40.4
81 44.6
85 49.9
—
87
—
55.3
58 18.1
60 20.5
71
102-6929 Blue
30.4
75 36.4
79 42.3
84 45.5
87
102-1940 White
49.9
89 55.1
94 61.5
102-1941
White
INF54-5154 INF54-5558 INF54-59
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
"swing joint at flows over 25-gpm (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
INFINITY 54 NOZZLE APEX
Pressure Nozzle
51
65 psi
52
53
80 psi
54
55
56
57
58
59
Apex at 15˚
6’ @ 51’
6’ @ 51’
7’ @ 59’
8’ @ 63’
9’ @ 66’
8’ @ 75’
9’ @ 74’
10’ @ 82’
11’ @ 81’
Apex at 25°
13’ @ 54’
11’ @ 64’
13’ @ 68’
15’ @ 74’
15’ @ 76’
18’ @ 83’
19’ @ 82’
18’ @ 87’
21’ @ 91’
Main Nozzle Adapter
A wide assortment of intermediate and inner nozzles for use in the main nozzle adapter and back nozzle position provide unmatched nozzle flexibility.
Note: Main Nozzle Adapter Data Located on Page 68. Back Nozzle Data Located on Page 73.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 47
47
3/6/19 1:21 PM
INFINITY
®
RAZOR
™
KITS
Extend the frequency of digging up and leveling sprinklers with the Toro ® INFINITY Razor kits. Over time the application of topdressing and settling can result in the sprinkler being in a depression below grade level. This can interfere in the natural roll of the ball, create trip hazards and take away from the natural beauty of the course.
The Razor kits are designed to raise the top of the sprinkler in 1/2” increments up to 11/2” (3 stages) without digging!!
FEATURES & BENEFITS
Eliminates sprinkler interference
Eliminates trip hazards
Enhances course appearance
Huge labor savings – no digging required!
Retention features – hardware never gets lost
Smart Access ® compartment enables access to pilot valve,
Lynx ® Smart Module, wire splices and more
Pilot
Valve stacker retention feature
48
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 48
Screw retention features
(3 places)
3/6/19 1:21 PM
INFINITY RAZOR KITS
Model Description
RAZOR-10-1 Razor Kit, 1" INFINITY, Stage 1 with 1.5" screws and pilot valve stacker
RAZOR-10-2 Razor Kit, 1" INFINITY, Stage 2 with 2" screws and pilot valve stacker
RAZOR-10-3 Razor Kit, 1" INFINITY, Stage 3 with 2.5" screws and pilot valve stacker
RAZOR-15-1 Razor Kit, 1.5" INFINITY, Stage 1 with 1.5" screws and pilot valve stacker
RAZOR-15-2 Razor Kit, 1.5" INFINITY, Stage 2 with 2" screws and pilot valve stacker
RAZOR-15-3 Razor Kit, 1.5" INFINITY, Stage 3 with 2.5" screws and pilot valve stacker
For more details see installation instructions 373-1015
Stage 3
Stage 2
Stage 1
1” Models 1.5” Models
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 49
49
3/6/19 1:21 PM
INFINITY
®
STEALTH
™
KITS
Eliminate sprinkler interference with the outcome of the game forever! Toro’s INFINITY Stealth Kits can be installed onto any INFINITY sprinkler allowing turf growth directly atop the sprinkler to eliminate the hard surface bounce should a golf ball hit it. The seamless turf appearance adds to the beauty of the course and improves labor efficiency by minimizing trimming efforts around the sprinklers.
FEATURES & BENEFITS
Eliminates sprinkler interference
Enhances course appearance
Natural turf atop sprinkler
Kit fits existing INFINITY sprinklers
Easy access to arc adjustment, snap rings, riser removal assembly, valve and rock screen
Smart Access ® compartment enables access to Pilot valve,
Lynx Smart Module, wire splices & more
Access to manual selector and TruJectory ™ adjuster with minimal turf/soil displacement
Turf cup grass can be grown in a nursery prior to being installed onto the sprinkler
BEFORE
STEALTH ™ KIT MODELS
STEALTH-T – Kit attaches to INFINITY Series sprinklers with TruJectory ™ style, 24-position main nozzle adjustment capability
STEALTH-D – Kit attaches to INFINITY Series sprinklers with dual trajectory main nozzle adjustment capability
AFTER
50
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 50
Enhanced appearance and increased efficiency
3/6/19 1:21 PM
Access to TruJectory
Adjustment - .290” lower than cup
1.5” deep
Identifies main nozzle direction
Drain slots prevent root rot
Arc adjuster .200” above rubber provides visibility and adjustability
Identifies TruJectory ™ adjustment location
Drainage holes promote root growth for turf retention and water drainage
Room to remove
• Snap ring, riser
• Riser assembly
• Snap ring, valve
• Valve
• Rock screen
Identifies manual selector location
Access to manual selector - .290” lower than cup
Kit Components Turf Removal for
Compartment Access
8” Cutter
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 51
51
3/6/19 1:21 PM
FLEX800
™
35-6/55-6 SERIES GOLF ROTORS
With the industry’s largest selection of high performance nozzles and TruJectory ™ adjustment the FLEX800
35-6/55-6 Series allows you to put water precisely where you want it for maximum distribution uniformity. And the part/full circle drive allows you to simply and economically adjust the area of coverage to match your seasonal watering needs or meet water rationing mandates in seconds with no disassembly or additional parts required.
FEATURES & BENEFITS
Industry's Largest Nozzle Selection
Nozzles from 42’ to 100’ radius plus a wide assortment of back nozzles lets you put the precise amount of water exactly where you need it. All nozzles threaded in from the front.
20,000 Volt Lightning Rating
Spike-Guard ™ solenoid virtually eliminates the need for replacements in high lightning areas. Draws half the amperage of traditional solenoids so you can run twice as many sprinklers simultaneously, reduce the cost of wire during initial installation or increase the distance from controller to sprinkler.
Adjustment With No Disassembly
Toro exclusive, simply pull up the riser and ratchet it to the precise position you want to water.
True Part and Full-Circle in One
(40° - 330° part circle)
These sprinklers can be full circle today and part circle tomorrow allowing you to simply and economically adjust the area of coverage to match your seasonal needs or meet water rationing mandates.
FLX35-6 FLX55-6
30°
7°
Trajectory – 24 Positions
From 7° - 30° in 1° increments put water where you want it. Adjust from the top of the sprinkler in seconds, wet or dry. This flexibility lets you tackle every obstacle on the course; wind, trees, bunkers, mounds and more.
52
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 52 3/6/19 1:22 PM
FLX35-6 CONVERSION UPGRADES
MODELS DESCRIPTION
• FLX35-6-3134
• FLX35-6-3537
• FLX35-6-3134E
• FLX35-6-3537E
FLX35-6 w/31–34 Nozzles
(33 Nozzle Installed)
FLX35-6 w/35–37 Nozzles
(35 Nozzle Installed)
FLX35-6 w/31–34 Nozzles
(33 Nozzle Installed), Effluent
FLX35-6 w/35–37 Nozzles
(35 Nozzle Installed), Effluent
FLX55-6 CONVERSION UPGRADES — RIBBED BODY
MODELS DESCRIPTION
• FLX55-6-5154
• FLX55-6-5558
• FLX55-6-59
• FLX55-6-5154E
• FLX55-6-5558E
• FLX55-6-59E
• 102-5011
• 102-0950
FLX55-6 w/51–54 Nozzles
(53 Nozzle Installed)
FLX55-6 w/55–58 Nozzles
(55 Nozzle Installed)
FLX55-6 w/59 Nozzle Installed
FLX55-6 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
FLX55-6 w/55–58 Nozzles
(55 Nozzle Installed),
FLX55-6 w/59 Nozzle Installed, Effluent
690 Adapter allows you to upgrade any 690 with
FLX55-6 conversions
Required to upgrade all
650, 670, 680, 750, and
780 Series Sprinklers
SPECIFICATIONS
Operational
• Inlet:
- FLX35-6: 1” ACME
- FLX55-6: 1½” ACME
• Radius:
- FLX35-6: 42’ – 92’
- FLX55-6: 52’ – 100’
• Flow Rate:
- FLX35-6: 7.1 – 45.3 gpm
- FLX55-6: 13.9 - 61.1 gpm
• Precipitation Rates:
- FLX35-6: Minimum - .37”/hr;
Maximum - .53”/hr
- FLX55-6: Minimum - .43”/hr;
Maximum - .60”/hr
• Pilot Valve: Selectable at 50,
65, 80 and 100 psi
• Recommended Operating
Pressure Range: 65-100 psi
(maximum -150 psi and minimum - 40 psi)
• Activation types – Electric
Valve-in-Head:
- Standard Solenoid: n 24 VAC, 50/60 Hz n
Inrush: 0.30 A n Holding 0.20 A
- Spike Guard Solenoid: n
24 VAC, 50/60 Hz n Inrush: 0.12 A n
Holding 0.10 A
- Nickel-Plated Spike Guard
Solenoid: n
24 VAC, 50/60 Hz n Inrush: 0.12 A n
Holding 0.10 A
- DC Latching Solenoid (DCLS): n
Momentary low voltage pulse
- Integrated Lynx Smart
Module w/DCLS: n
Momentary low voltage pulse
• Trajectory: 24 positions from
7° - 30° in 1° increments
Additional Features
• FLX35-6 has eight nozzle
variations (30, 31, 32, 33,
34, 35, 36 and 37)
• FLX55-6 has nine nozzle
variations (51, 52, 53, 54,
55, 56, 57, 58 and 59)
• Four in-line nozzles,
rotating stream pattern
• One back nozzle position
• Stator variations: FLX35-6 – 3
and FLX55-6 – 3
• Ratcheting riser
• Nozzle base clutching
Dimensions
• Body Flange Diameter:
- FLX35-6: 6 1 /
2
”
- FLX55-6: 7 1 /
2
”
• Body height:
- FLX35-6: 10”
- FLX55-6: 11 3 /
8
”
• Weight:
- FLX35-6: 2.94 lbs.
- FLX55-6: 3.61 lbs.
• Weight Integrated Lynx Smart
Module
- FLX35-6: 3.63 lbs.
- FLX55-6: 4.30 lbs.
• Pop-up height to nozzle: 3¼”
Warranty
• Three years
• Five years when installed with
Toro Swing Joints
FLX55-6 CONVERSION UPGRADES — RIBLESS BODY
MODELS DESCRIPTION
• FLX55-6-5154R
• FLX55-6-5558R
• FLX55-6-59R
• FLX55-6-5154RE
• FLX55-6-5558RE
• FLX55-6-59RE
FLX55-6 w/51–54 Nozzles
(53 Nozzle Installed)
FLX55-6 w/55–58 Nozzles
(55 Nozzle Installed)
FLX55-6 w/59 Nozzle Installed
FLX55-6 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
FLX55-6 w/55–58 Nozzles
(55 Nozzle Installed), Effluent
FLX55-6 w/59 Nozzle Installed, Effluent
Body
Inlet
FLX X
3—1"
5—1 1 ⁄ 2 "
Specifying Information—FLEX800 35-6 & FLEX800 55-6
Arc Nozzle
5
5—Part-circle and Fullcircle In One
X X
FLX35 —30,
31, 32, 33, 34,
35, 36, 37
FLX55 —51,
52, 53, 54, 55,
56, 57, 58, 59
FLX X 5XXX X 6X
Pressure
Regulation*
X
6—65 psi
8—80 psi
1—100 psi
Activation Type
X
1—Standard Solenoid
2—Spike Guard ™ Solenoid
3—Nickel-plated Spike
Guard Solenoid
4—DC Latching Solenoid
(DCLS)
6—Integrated Lynx Smart
Module w/DCLS
Trajectory Optional
6
6—24-position
TruJectory
X
7—Effluent
Example: When specifying an FLX35-6 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike
Guard you would specify: FLX35-346-26
Note: Not all models available. * All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 53
53
3/6/19 1:22 PM
FLEX800 ™ 35-6/55-6 SERIES GOLF ROTORS
B
C
A
FLEX800 35-6 TRAJECTORY PERFORMANCE
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
46'
4'
#31 Nozzle @ 65 psi, 15.5 gpm
10°
46'
4'
15°
50'
5'
20°
53'
8'
25°
54'
11'
30°
50'
13'
7°
46'
3'
#32 Nozzle @ 65 psi, 20.5 gpm
10°
49'
4'
15°
51'
6'
20°
55'
9'
25°
63'
12'
30°
54'
15'
7°
54'
4'
#33 Nozzle @ 65 psi, 22.9 gpm
10°
56'
5'
15°
59'
7'
20°
62'
9'
25°
66'
13'
30°
61'
15'
"C" Distance from Head 25' 25' 26' 33' 33' 33' 20' 24' 28' 34' 34' 34' 23' 28' 32' 34' 35' 35'
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
58'
4'
#34 Nozzle @ 65 psi, 30.0 gpm
10°
60'
4'
15°
63'
6'
20°
67'
11'
25°
74'
14'
30°
70'
17'
7°
59'
4'
#35 Nozzle @ 65 psi, 32.4 gpm
10°
61'
5'
15°
64'
7'
20°
70'
11'
25°
76'
15'
30°
74'
17'
7°
64'
5'
#36 Nozzle @ 80 psi, 34.0 gpm
10°
68'
7'
15°
76'
9'
20°
80'
14'
25°
84'
17'
30°
82'
22'
"C" Distance from Head 24' 26' 35' 39' 39' 39' 30' 32' 36' 43' 43' 43' 25' 38' 40' 45' 49' 45'
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
65'
5'
#37 Nozzle @ 80 psi, 39.8 gpm
10°
69'
7'
15°
78'
9'
20°
82'
14'
25°
86'
18'
30°
84'
22'
"C" Distance from Head 30' 39' 41' 46' 50' 46'
FLEX800 55-6 TRAJECTORY PERFORMANCE
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
46'
4'
#51 Nozzle @65 psi, 15.7 gpm
10°
46'
4'
15°
51'
6'
20°
53'
10'
25°
54'
13'
30°
50'
15'
7°
49'
4'
#52 Nozzle @65 psi, 20.8 gpm
10°
50'
4'
15°
51'
6'
20°
55'
9'
25°
64'
11'
30°
65'
13'
7°
54'
5'
#53 Nozzle @65 psi, 23.4 gpm
10°
56'
6'
15°
59'
7'
20°
62'
9'
25°
68'
13'
30°
61'
15'
"C" Distance from Head 26' 27' 32' 38' 40' 41' 22' 26' 31' 35' 34' 30' 30' 33' 32' 35' 37' 37'
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
58'
5'
#54 Nozzle @ 65 psi, 31.2 gpm
10°
60'
6'
15°
63'
8'
20°
67'
10'
25°
74'
15'
30°
70'
17'
7°
59'
6'
#55 Nozzle @ 65 psi, 33.8 gpm
10°
62'
6'
15°
66'
9'
20°
70'
11'
25°
76'
15'
30°
77'
17'
7°
72'
5'
#56 Nozzle @ 80 psi, 35.7 gpm
10°
73'
7'
15°
75'
9'
20°
82'
14'
25°
85'
17'
30°
82'
22'
"C" Distance from Head 31' 34' 40' 41' 41' 42' 34' 36' 43' 45' 45' 45' 25' 38' 40' 45' 49' 45'
Nozzle/psi/gpm
Trajectory
"A" Radius
"B" Spray Height
7°
72'
5'
#57 Nozzle @ 80 psi, 41.9 gpm
10°
74'
7'
15°
77'
9'
20°
83'
14'
25°
89'
18'
30°
85'
22'
7°
75'
6'
#58 Nozzle @ 80 psi, 46.2 gpm
10°
77'
7'
15°
83'
10'
20°
87'
15'
25°
92'
18'
30°
88'
22'
7°
77'
7'
#59 Nozzle @ 80 psi, 53.3 gpm
10°
78'
8'
15°
84'
11'
20°
89'
16'
25°
96'
21'
30°
92'
25'
"C" Distance from Head 30' 39' 41' 46' 50' 46' 38' 40' 43' 47' 52' 48' 42' 44' 45' 47' 53' 49'
Information is for reference only. Actual results may vary.
54
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 54 3/6/19 1:22 PM
FLEX800 ™ 35-6/55-6 SERIES GOLF ROTORS
FLEX800 35-6 SERIES PERFORMANCE CHART
Nozzle Set 30 Nozzle Set 31 Nozzle Set 32
Base
Pressure
(White)
102-2208
(Yellow)
102-4587
(Blue)
102-4588
Nozzle Set 33
(Brown)
102-4589
Nozzle Set 34
(Orange)
102-0728
Nozzle Set 35
(Green)
102-0729
Nozzle Set 36
(Gray)
102-0730
Nozzle Set 37
(Black)
102-4261
Blue Gray Blue Gray Red Gray Orange Gray Orange Gray Blue Gray Blue Gray Orange Gray
102-2925 102-2910 102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910
Back
Nozzle
Positions
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 psi
50
65
80
100
Stator
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
42 7.1
52 13.7
61 17.1
64 20.2
69 27.4
— — — — — —
45
46
8.7
9.6
54
57
15.5
17.0
63
67
20.5
22.6
66
70
22.9
25.3
74
77
30.0
33.2
76
79
32.4
35.8
—
84
—
37.5
—
86
—
40.8
48
102-6929 Blue
Conversions
11.2
59 18.9
72 25.2
74
102-1939 Yellow
FLX35-6-3134
28.2
80 37.0
84 39.9
88 42.5
102-1940 White
FLX35-6-3537
92 45.3
FLEX800 55-6 SERIES PERFORMANCE CHART
Nozzle Set 51 Nozzle Set 52 Nozzle Set 53 Nozzle Set 54 Nozzle Set 55 Nozzle Set 56 Nozzle Set 57 Nozzle Set 58 Nozzle Set 59
Base
Pressure
(Yellow)
102-4587
(Blue)
102-4588
(Brown)
102-4589
(Orange)
102-0728
(Green)
102-0729
(Gray)
102-0730
(Black)
102-4261
(Red)
102-4260
(Beige)
102-4259
Blue Gray Red Gray Orange Gray Orange Gray Blue Gray Blue Gray Orange Gray Blue Gray Blue Gray
102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910
Back
Nozzle
Positions psi
50
65
80
100
Stator
Conver.
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
52 13.9
62 17.4
66 20.7
69 28.6
— — — — — — — — — —
54
57
59
15.7
17.2
19.1
64
68
73
20.8
22.9
25.5
68
72
76
102-1939 Yellow
23.4
25.8
28.7
74
77
80
31.2
34.4
38.2
76
79
84
33.8
37.2
41.3
—
85
89
—
39.4
43.7
—
89
94
102-1940 White
—
43.6
48.5
—
92
95
—
47.5
51.1
—
96
100
—
57.0
61.1
102-1941
FLX55-6-5154 FLX55-6-5558 FLX55-6-59 n
Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
" swing joint at flows over 25-gpm (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Main Nozzle Adapter
A wide assortment of intermediate and inner nozzles for use in the main nozzle adapter and back nozzle position provide unmatched nozzle flexibility.
Note: Main Nozzle Adapter Data Located on Page 68. Back Nozzle Data Located on Page 73.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 55
55
3/6/19 1:22 PM
FLEX800
™
35/55 SERIES GOLF ROTORS
The FLEX800 35/55 Series features a dual trajectory main nozzle that provides exceptional nozzle performance at the 25° standard angle position and great performance in windy applications at the 15° low angle position. And the part/full circle drive allows you to adjust the area of coverage to match your seasonal watering needs or meet water rationing mandates in seconds with no additional parts required.
FEATURES & BENEFITS
Industry's Largest Nozzle Selection
Nozzles from 43’ to 92’ radius plus a wide assortment of back nozzles lets you put the precise amount of water exactly where you need it. All nozzles threaded in from front.
Stainless Steel Valve Seat
Eliminates body damage from rocks and debris. This indestructible stainless steel seat is molded to the body and virtually eliminates body replacements due to seat damage.
Optional Radius Reduction Screw
Allows for fine tuning the radius to exactly the distance you need.
In combination with main nozzle sizing and trajectory adjustment the radius reduction screw can effectively reduce the sprinkler throw down to 30’.
True Part and Full-Circle in One
(40° - 330° part circle)
These sprinklers can be full circle today and part circle tomorrow allowing you to adjust the area of coverage to match your seasonal needs or meet water rationing mandates.
FLX35 FLX55
25°
OR
15°
Dual Trajectory
The 25° setting provides maximum distance of throw and the 15° setting provides improved wind performance, radius reduction and obstacle avoidance.
56
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 56 3/6/19 1:22 PM
FLX35 CONVERSION UPGRADES
MODELS DESCRIPTION
• FLX35-3134
• FLX35-3537
• FLX35-3134E
• FLX35-3537E
FLX35 w/31–34 Nozzles
(#3 Nozzle Installed)
FLX35 w/35–37 Nozzles
(#5 Nozzle Installed)
FLX35 w/31–34 Nozzles
(#3 Nozzle Installed), Effluent
FLX35 w/35–37 Nozzles
(#5 Nozzle Installed), Effluent
FLX55 CONVERSION UPGRADES — RIBBED BODY
MODELS DESCRIPTION
• FLX55-5154
• FLX55-5558
• FLX55-59
• FLX55-5154E
• FLX55-5558E
• FLX55-59E
• 102-5011
• 102-0950
FLX55 w/51–54 Nozzles
(#3 Nozzle Installed)
FLX55 w/55–58 Nozzles
(#5 Nozzle Installed)
FLX55 w/59 Nozzle
FLX55 w/51–54 Nozzles
(#3 Nozzle Installed), Effluent
FLX55 w/55–58 Nozzles
(#5 Nozzle Installed), Effluent
FLX55 w/59 Nozzle, Effluent
690 Adapter allows you to upgrade any 690 with
FLX55 conversions
Required to upgrade all
650, 670, 680, 750, and
780 Series Sprinklers
FLX55 CONVERSION UPGRADES — RIBLESS BODY
MODELS DESCRIPTION
• FLX55-5154R
• FLX55-5558R
• FLX55-59R
• FLX55-5154RE
• FLX55-5558RE
• FLX55-59RE
FLX55 w/51–54 Nozzles
(#3 Nozzle Installed)
FLX55 w/55–58 Nozzles
(#5 Nozzle Installed)
FLX55 w/59 Nozzle
FLX55 w/51–54 Nozzles
(#3 Nozzle Installed), Effluent
FLX55 w/55–58 Nozzles
(#5 Nozzle Installed), Effluent
FLX55 w/59 Nozzle, Effluent
SPECIFICATIONS
Operational
• Inlet:
- FLX35: 1” ACME
- FLX55: 1½” ACME
• Radius:
- FLX35: 43’ – 83’
- FLX55: 55’ – 92’
• Flow Rate:
- FLX35: 8.2 – 47.3 gpm
- FLX55: 14.1 – 61.3 gpm
• Precipitation Rates:
- FLX35: Minimum - .41”/hr;
Maximum - .45”/hr
- FLX55: Minimum - .46”/hr;
Maximum - .58”/hr
• Pilot Valve: Selectable at 50, 65,
80 and 100 psi
• Recommended Operating
Pressure Range: 65-100 psi
(maximum – 150 psi and minimum – 40 psi)
• Activation types – Electric
Valve-in-Head:
- Standard Solenoid: n
24 VAC, 50/60 Hz n
Inrush: 0.30 A n Holding 0.20 A
- Spike Guard Solenoid: n 24 VAC, 50/60 Hz n
Inrush: 0.12 A n
Holding 0.10 A
- Nickel-Plated Spike Guard
Solenoid: n
24 VAC, 50/60 Hz n Inrush: 0.12 A n
Holding 0.10 A
- DC Latching Solenoid (DCLS): n
Momentary low voltage pulse
- Integrated Lynx Smart Module
with DCLS: n
Momentary low voltage pulse
Additional Features
• FLX35 has eight nozzle
variations (30, 31, 32, 33,
34, 35, 36 & 37)
• FLX55 has nine nozzle
variations (51, 52, 53, 54,
55, 56, 57, 58 & 59)
• Three in-line nozzles,
rotating stream pattern
• Two back nozzle positions
• Stator variations: 3
• Radius reduction screw
363-4839 for fine tuning
• Ratcheting riser
• Nozzle base clutching
Dimensions
• Body Flange Diameter:
- FLX35: 6 1 /
2
”
- FLX55: 7 1 /
2
”
• Body height:
- FLX35: 10”
- FLX55: 11 3 /
8
”
• Weight:
- FLX35: 2.89 lbs.
- FLX55: 3.57 lbs.
• Weight Integrated Lynx
Smart Module
- FLX35: 3.58 lbs.
- FLX55: 4.26 lbs.
• Pop-up height to nozzle: 3¼”
Warranty
• Three years
• Five years when installed with Toro Swing Joints
Body
Inlet
FLX X
3—1"
5—1 1 ⁄ 2 "
Arc
5
5—Part-circle and
Full-circle
In One
Specifying Information—FLEX800 35 & FLEX800 55
Nozzle
FLX X 5XXX X X
X X
FLX35 —30, 31, 32, 33, 34, 35, 36, 37
FLX55 —51, 52, 53, 54, 55, 56, 57, 58, 59
Pressure
Regulation*
X
6—65 psi
8—80 psi
1—100 psi
Activation Type
X
1—Standard Solenoid
2—Spike Guard™ Solenoid
3—Nickel-plated Spike Guard Solenoid
4—DC Latching Solenoid (DCLS)
6—Integrated Lynx Smart Module with DCLS
Optional
X
7—Effluent
Example: When specifying an FLX35-6 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard you would specify: FLX35-346-2
Note: Not all models available. * All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 57
57
3/6/19 1:22 PM
FLEX800 ™ 35/55 SERIES GOLF ROTORS
FLEX800 35 SERIES PERFORMANCE CHART—25°
Nozzle Set 30 Nozzle Set 31 Nozzle Set 32
Front
Nozzle
Positions
(White Plug)
102-2208
(Yellow)
102-6906
(Blue)
102-0726
Nozzle Set 33
(Brown)
102-6907
Nozzle Set 34
(Orange)
102-0728
Nozzle Set 35
(Green)
102-6955
Nozzle Set 36
(Gray)
102-6935
Nozzle Set 37
(Black)
102-6936
Yellow Beige Yellow Brown Yellow Yellow Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green
102-5670 102-6942 102-5670 102-5671 102-5670 102-6884 102-5670 102-6884 102-5670 102-6884 102-5670 102-6885 102-6531 102-6885 102-6531 102-6885
Back
Nozzle
Positions psi
50
65
80
100
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
43
45
46
8.2
10.0
11.5
53
53
57
13.8
15.5
17.3
56
59
62
18.3
20.5
22.7
61
64
67
21.7
24.4
27.1
65
68
71
25.3
28.2
31.1
—
72
75
—
34.1
37.8
—
—
78
—
—
40.3
—
—
80
—
—
44.0
47 13.4
59 19.1
65 24.9
70 29.8
74 34.1
79 40.9
81 43.8
83 47.3
FLEX800 35 SERIES PERFORMANCE CHART—15° psi Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
50 43 8.2
52 13.6
58 18.1
61 21.5
62 25.6
— — — — — —
65 45 10.0
54 15.3
60 20.3
64 24.2
65 27.3
69 33.1
— — — —
80 46 11.5
58 17.2
64 22.6
69 26.8
69 30.2
75 36.8
76 39.7
76 42.9
100 47 13.4
Stator 102-6929 Blue
Conversions
60 19.0
66 24.7
71
102-1939 Yellow
FLX35-3134
29.5
72 32.9
78 39.5
82 42.6
102-1940 White
FLX35-3537
82 46.1
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
" swing joint at flows over 25-gpm (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
FLEX800 35 NOZZLE APEX
Pressure Nozzle
31
65 psi
32
33
80 psi
34
35
36
37
Apex at 15˚
6’ @ 51’
6’ @ 51’
7’ @ 59’
8’ @ 63’
9’ @ 66’
8’ @ 75’
9’ @ 74’
Apex at 25°
13’ @ 54’
11’ @ 64’
13’ @ 68’
15’ @ 74’
15’ @ 76’
18’ @ 83’
19’ @ 82’
58
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 58 3/6/19 1:22 PM
FLEX800 ™ 35/55 SERIES GOLF ROTORS
FLEX800 55 SERIES PERFORMANCE CHART—25°
Nozzle Set 51 Nozzle Set 52 Nozzle Set 53 Nozzle Set 54 Nozzle Set 55 Nozzle Set 56 Nozzle Set 57 Nozzle Set 58 Nozzle Set 59
Front
Nozzle
Positions
(Yellow)
102-6906
(Blue)
102-0726
(Brown)
102-6907
(Orange)
102-0728
(Green)
102-6955
(Gray)
102-6935
(Black)
102-6936
(Red)
102-6909
(Beige)
102-4259
Yellow Brown Yellow Yellow Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green Green Green Green Green
102-5670 102-5671 102-5670 102-6884 102-5670 102-6884 102-5670 102-6884 102-5670 102-6885 102-6531 102-6885 102-6531 102-6885 102-6531 102-6885 102-6531 102-6885
Back
Nozzle
Positions psi
50
65
80
100
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
55
57
59
61
14.1
15.8
17.5
19.3
57
60
61
63
18.5
20.9
23.1
25.3
62
65
68
71
22.3
25.1
27.8
30.3
66
69
72
75
25.8
28.7
31.7
34.5
—
73
76
80
—
35.9
39.7
43.5
—
—
80
83
—
—
43.1
49.0
—
—
83
88
—
—
48.2
51.5
—
—
85
90
—
—
50.0
53.9
—
—
89
92
—
—
57.5
61.3
FLEX800 55 SERIES PERFORMANCE CHART—15° psi
50
65
80
100
Stator
Conversions
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
55
56
14.0
15.6
59 17.4
60 19.2
59
62
16.5
20.7
66 23.0
68 25.1
62
65
69 27.7
71 30.2
102-1939 Yellow
22.2
25.0
63
66
70
72
25.6
28.5
31.5
34.3
—
75
78
80
—
35.3
39.0
41.9
—
—
—
—
78 42.4
81 47.2
—
—
102-1940 White
—
—
79 46.9
83 52.1
—
—
79
83
—
—
49.5
53.4
—
—
82
85
—
—
57.2
60.8
102-1941 White
FLX55-5154 FLX55-5558 FLX55-59
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
" swing joint at flows over 25-gpm (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
FLEX800 55 NOZZLE APEX
Pressure Nozzle
51
65 psi
52
53
80 psi
54
55
56
57
58
59
Apex at 15˚
6’ @ 51’
6’ @ 51’
7’ @ 59’
8’ @ 63’
9’ @ 66’
8’ @ 75’
9’ @ 74’
10’ @ 82’
11’ @ 81’
Apex at 25°
13’ @ 54’
11’ @ 64’
13’ @ 68’
15’ @ 74’
15’ @ 76’
18’ @ 83’
19’ @ 82’
18’ @ 87’
21’ @ 91’
Note: Main Nozzle Adapter Data Located on Page 68. Back Nozzle Data Located on Page 73.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 59
59
3/6/19 1:22 PM
FLEX800
™
34/54 SERIES GOLF ROTORS
The FLEX800 34/54 Series with dual trajectory main nozzle provides exceptional nozzle performance at the
25° standard angle position and great performance in windy applications at the 15° low angle position. And the consistency of the constant velocity full circle drive ensures even water application across the coverage area every time you water.
FEATURES & BENEFITS
Industry's Largest Nozzle Selection
Nozzles from 52’ to 99’ radius plus a wide assortment of back nozzles lets you put the precise amount of water exactly where you need it. All nozzles threaded in from front.
Stainless Steel Valve Seat
Eliminates body damage from rocks and debris. This indestructible stainless steel seat is molded to the body and virtually eliminates body replacements due to seat damage.
Optional Radius Reduction Screw
Allows for fine tuning the radius to exactly the distance you need.
In combination with main nozzle sizing and trajectory adjustment the radius reduction screw can effectively reduce the sprinkler throw down to 30’.
Constant Velocity Full Circle Drive
Ensures consistent rotation speeds when matched with station run times for even water application across the coverage area every time you water.
FLX34 FLX54
25°
OR
15°
Dual Trajectory
The 25° setting provides maximum distance of throw and the 15° setting provides improved wind performance, radius reduction and obstacle avoidance.
60
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 60 3/6/19 1:22 PM
FLX34 CONVERSION UPGRADES
MODELS DESCRIPTION
• FLX34-3134
• FLX34-3537
• FLX34-3134E
• FLX34-3537E
FLX34 w/31–34 Nozzles
(#3 Nozzle Installed)
FLX34 w/35–37 Nozzles
(#5 Nozzle Installed)
FLX34 w/31–34 Nozzles
(#3 Nozzle Installed), Effluent
FLX34 w/35–37 Nozzles
(#5 Nozzle Installed), Effluent
FLX54 CONVERSION UPGRADES
MODELS DESCRIPTION
• FLX54-5154
• FLX54-5558
• FLX54-59
• FLX54-5154E
• FLX54-5558E
• FLX54-59E
• 102-5011
• 102-0950
FLX54 w/51–54 Nozzles
(#3 Nozzle Installed)
FLX54 w/55–58 Nozzles
(#5 Nozzle Installed)
FLX54 w/59 Nozzle
FLX54 w/51–54 Nozzles
(#3 Nozzle Installed), Effluent
FLX54 w/55–58 Nozzles
(#5 Nozzle Installed), Effluent
FLX55 w/59 Nozzle, Effluent
690 Adapter allows you to upgrade any 690 with FLX54 conversions
Required to upgrade all
1.5” Series Sprinklers (650,
670, 680, 750, and 780)
SPECIFICATIONS
Operational
• Inlet:
- FLX34: 1” ACME
- FLX54: 1½” ACME
• Radius:
- FLX34: 52’ – 91’
- FLX54: 52’ – 99’
• Flow Rate:
- FLX34: 13.0 – 46.9 gpm
- FLX54: 13.2 - 61.8 gpm
• Precipitation Rates:
- FLX34: Minimum - .33”/hr; Maximum - .55”/hr
- FLX54: Minimum - .33”/hr; Maximum - .61”/hr
• Pilot Valve: Selectable at 50, 65, 80 and 100 psi
• Recommended Operating Pressure Range: 65-100 psi
(maximum-150 psi and minimum-40 psi)
• Activation types – Electric Valve-in-Head:
- Standard Solenoid: n
24 VAC, 50/60 Hz n Inrush: 0.30 A n
Holding 0.20 A
- Spike Guard Solenoid: n
24 VAC, 50/60 Hz n
Inrush: 0.12 A n Holding 0.10 A
- Nickel-Plated Spike Guard Solenoid: n 24 VAC, 50/60 Hz n
Inrush: 0.12 A n
Holding 0.10 A
- DC Latching Solenoid (DCLS): n
Momentary low voltage pulse
- Integrated Lynx Smart Module w/DCLS: n
Momentary low voltage pulse
• Trajectory: 25° or 15°
Dimensions
• Body Flange Diameter:
- FLX34: 6 1 /
2
”
- FLX54: 7 1 /
2
”
• Body height:
- FLX34: 10”
- FLX54: 11 3 /
8
”
• Weight:
- FLX34: 2.87 lbs.
- FLX54: 3.55 lbs.
• Weight Integrated Lynx Smart Module
- FLX34: 3.56 lbs.
- FLX54: 4.24 lbs.
• Pop-up height to nozzle: 3¼”
Warranty
• Three years
• Five years when installed with Toro Swing Joints
Body
Inlet
FLX X
3—1"
5—1 1 ⁄
2
"
Arc
4
4—Full-circle
Specifying Information—FLEX800 34 & FLEX800 54
Nozzle
FLX X 4XXX X X
X X
FLX34 —30, 31, 32, 33, 34, 35, 36, 37
FLX54 —51, 52, 53, 54, 55, 56, 57, 58, 59
Pressure
Regulation*
X
6—65 psi
8—80 psi
1—100 psi
Activation Type
X
1—Standard Solenoid
2—Spike Guard ™ Solenoid
3—Nickel-plated Spike Guard Solenoid
4—DC Latching Solenoid (DCLS)
6—Integrated Lynx Smart Module with DCLS
Optional
X
7—Effluent
Example: When specifying an FLX34 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard you would specify: FLX34–346–2
Note: Not all models available. * All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 61
61
3/6/19 1:22 PM
FLEX800 ™ 34/54 SERIES GOLF ROTORS
FLEX800 34 SERIES PERFORMANCE CHART—25°
Nozzle Set 31 Nozzle Set 32 Nozzle Set 33
Front
Nozzle
Positions
(Yellow)
102-0725
(Blue)
102-7001
(Brown)
102-0727
Nozzle Set 34
(Orange)
102-7002
Nozzle Set 35
(Green)
102-6908
Nozzle Set 36
(Gray)
102-0730
Nozzle Set 37
(Black)
102-4261
Red Plug
102-4335
Back
Nozzle
Positions psi
50
65
80
100
Yellow
102-6937
Radius
57
58
60
62
Red Plug Red Plug
102-4335 102-4335
Red Plug Red Plug
102-4335 102-4335
Red Plug
102-4335
Red Plug Red Plug
102-4335 102-4335
Red Plug Red Plug
102-4335 102-4335
Red Plug
102-4335
Red Plug Red Plug
102-4335 102-4335
Brown
102-6883
Blue
102-2925 gpm
13.0
14.6
16.2
17.9
Yellow
102-6937
Radius
58
60
63
66
Orange
102-2926 gpm
15.5
18.0
20.5
23.4
Yellow Red
102-6937 102-2928
Radius
64
68
72
75 gpm
21.9
24.4
26.9
29.8
Yellow
102-6937
Radius
68
72
76
79
Beige Yellow
102-2929 102-6937 gpm
24.4
28.1
31.1
34.9
Radius
—
76
80
84
Beige Yellow
102-2929 102-6937 gpm
—
32.2
35.6
39.3
Radius
—
—
83
88
Red Yellow
102-6944 102-6937 gpm
—
—
38.2
43.4
Radius
—
—
85
91
Gray
102-6945 gpm
—
—
41.5
46.9
FLEX800 34 SERIES PERFORMANCE CHART—15° psi
50
65
80
100
Stator
Radius gpm Radius gpm Radius gpm Radius
52
53
56
57
12.9
14.4
16.0
17.5
53
54
57
59
15.6
17.1
19.0
20.5
60
61
65
67
21.7
24.2
26.6
29.5
62
64
69
71
102-6929 Blue
Conversions FLX34-3134 gpm
25.5
28.0
31.0
33.9
Radius
—
67
73
75 gpm Radius gpm Radius gpm
—
32.1
35.5
38.4
—
—
76
80
—
—
38.0
43.1
—
—
77
81
—
—
41.3
46.8
102-1940 White
FLX34-3537
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
" swing joint at flows over 25-gpm (95-LPM).
Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
FLEX800 34 NOZZLE APEX
Pressure Nozzle
31
65 psi
32
33
80 psi
34
35
36
37
Apex at 15˚
6’ @ 51’
6’ @ 51’
7’ @ 59’
8’ @ 63’
9’ @ 66’
8’ @ 75’
9’ @ 74’
Apex at 25°
13’ @ 54’
11’ @ 64’
13’ @ 68’
15’ @ 74’
15’ @ 76’
18’ @ 83’
19’ @ 82’
62
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 62 3/6/19 1:22 PM
FLEX800 ™ 34/54 SERIES GOLF ROTORS
FLEX800 54 SERIES PERFORMANCE CHART—25°
Nozzle Set 51 Nozzle Set 52 Nozzle Set 53 Nozzle Set 54 Nozzle Set 55 Nozzle Set 56 Nozzle Set 57 Nozzle Set 58 Nozzle Set 59
Front
Nozzle
Positions
(Yellow)
102-0725
(Blue)
102-7001
(Brown)
102-0727
(Orange)
102-7002
(Green)
102-6908
(Gray)
102-0730
(Black)
102-4261
(Red)
102-4260
(Beige)
102-4259
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Brown Red Plug Brown Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-6883 102-4335 102-6883 102-4335 102-4335
Back
Nozzle
Positions psi
50
65
80
100
Yellow Blue Yellow Orange Yellow Red Yellow Beige Yellow Beige Yellow Red Yellow Gray Yellow Gray Yellow Gray
102-6937 102-2925 102-6937 102-2926 102-6937 102-2928 102-6937 102-2929 102-6937 102-2929 102-6937 102-6944 102-6937 102-6945 102-6937 102-6945 102-6937 102-6945
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
58
60
61
13.2
14.8
16.4
59
61
64
15.7
17.5
20.0
64
68
72
22.0
24.8
27.6
70
74
78
26.2
29.3
32.6
—
79
83
—
34.2
38.0
—
—
85
—
—
40.7
—
—
87
—
—
44.9
—
—
91
—
—
50.2
—
—
96
—
—
55.6
63 18.1
67 23.6
75 30.4
81 36.7
87 42.5
90 45.8
93 50.2
95 55.4
99 61.8
FLEX800 54 SERIES PERFORMANCE CHART—15° psi
50
65
80
100
Stator
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
52
53
56
13.2
14.8
16.4
58 18.1
53
54
58
15.8
17.4
19.4
60 21.1
61
63
68
22.0
24.8
27.6
71 30.4
65
67
72
26.0
29.2
32.5
75 36.4
—
69
79
—
34.1
75 37.8
42.3
—
—
—
—
79 40.4
84 45.5
—
—
81 44.6
87
—
—
49.9
—
—
89
—
—
85 49.9
55.1
—
—
—
—
87 55.3
94 61.5
102-6929 Blue 102-1940 White 102-1941 White
Conversions FLX54-5154 FLX54-5558 FLX54-59
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
" swing joint at flows over 25-gpm (95-LPM).
Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
FLEX800 54 NOZZLE APEX
Pressure Nozzle Apex at 15˚
65 psi
80 psi
55
56
57
58
59
51
52
53
54
6’ @ 51’
6’ @ 51’
7’ @ 59’
8’ @ 63’
9’ @ 66’
8’ @ 75’
9’ @ 74’
10’ @ 82’
11’ @ 81’
Apex at 25°
13’ @ 54’
11’ @ 64’
13’ @ 68’
15’ @ 74’
15’ @ 76’
18’ @ 83’
19’ @ 82’
18’ @ 87’
21’ @ 91’
Main Nozzle Adapter
A wide assortment of intermediate and inner nozzles for use in the main nozzle adapter and back nozzle position provide unmatched nozzle flexibility.
Note: Main Nozzle Adapter Data Located on Page 68. Back Nozzle Data Located on Page 73.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 63
63
3/6/19 1:22 PM
FLEX800
™
35-6B/34B/35B SERIES GOLF ROTORS
The FLEX800 ™ B Series golf sprinkler family brings you all the great features and performance of the FLEX800
35-6, 34 and 35 Series sprinklers in a more economical body package specifically designed for block systems.
With its rugged golf body design, small exposed surface diameter, flanged body for stability and check valve these sprinklers are perfect for every golf application.
FEATURES & BENEFITS
Industry's Largest Nozzle Selection
Nozzles from 25’ to 95’ radius, plus a wide assortment of intermediate and inner nozzles, provide unmatched flexibility allowing you to put the precise amount of water exactly where you need it. All nozzles are color-coded, debris tolerant, and thread in from front.
True Part and Full-Circle in One
(40° - 330° part circle)
These sprinklers can be full circle or part circle allowing you to adjust the area of coverage to match your seasonal needs or meet water rationing mandates.
Flanged Cap Installs Below Grade
Stabilizes the body position and maintains optimum nozzle performance.
Small Exposed Diameter
Minimizes the appearance of the sprinkler to maximize the beauty of the course. Perfect for high traffic areas like tees, greens and surrounds.
64
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 64
FLX35-6B
FLX35B
FLX34B
3/6/19 1:22 PM
30°
7°
25°
OR
15°
FLX35-6B FLX34B and FLX35B
Nozzle Trajectory Provides Unmatched Performance
FLX35-6B with TruJectory ™ adjustment from 7°-30° in 1° increments and
FLX35/FLX34 models with dual trajectory settings of 25° or 15° provide improved wind performance, obstacle avoidance and radius adjustment.
Main Nozzle Adapter
A wide assortment of intermediate and inner nozzles for use in the main nozzle adapter and back nozzle position provide unmatched nozzle flexibility.
SPECIFICATIONS
Operational
• Inlet: 1” NPT, BSP or ACME
• Radius:
- FLX35-6B: 42’ – 95’
- FLX35B: 43’ – 90’
- FLX34B: 57’ – 95’
• Flow Rate:
- FLX35-6B : 7.1 – 52.5 gpm
- FLX35B: 8.2 – 56.3 gpm
- FLX34B : 13.0 – 55.4 gpm
• Precipitation Rates:
- FLX35-6B : Minimum - .34”/hr; Maximum - .56”/hr
- FLX35B: Minimum - .37”/hr; Maximum - .67”/hr
- FLX34B : Minimum - .33”/hr; Maximum - .59”/hr
• Recommended Operating Pressure Range: 50-100 psi
(maximum – 150 psi and minimum – 40 psi)
• Check-O-Matic models maintain up to 5’ elevation change
Nozzle Selection
• Nozzle variations
- FLX35-6B - Nine variations (30, 31, 32, 33, 34, 35, 36, 37 & 38)
- FLX34B - Nine variations (30, 31, 32, 33, 34, 35, 36, 37 & 38)
- FLX54B – Eight variations (31, 32, 33, 34, 35, 36, 37 & 38)
• Back nozzle capability on part circle models standard
- FLX35-6B – one position available
- FLX35B – two positions available
- FLX34B – two additional front nozzle positions
• Main-less capability for short radius applications
• Stator variations - 2
• Radius reduction screw for fine tuning the radius (363-4839).
Optional on: FLX35B, FLX34B and not available on FLX35-6B models
• Ratcheting riser – Part circle models
• Nozzle base clutching – Part circle models
Dimensions
• Body diameter: 6”
• Body height: 8.5”
• Weight:
- FLX34B – 1.98 lbs.
- FLX35B – 2.00 lbs.
- FLX35-6B – 2.05 lbs.
• Pop-up height to nozzle: 3¼”
Warranty
• Three years
• Five years when installed with Toro Swing Joints
Series
FLX3
FLX3 – FLEX800
B Series
Arc
X
4—Full-Circle
5—Part-/Full-Circle
5-6—Part-/Full-Circle
with TruJectory
Specifying Information—FLEX800 B Series
System
B
B —Block
FLX3 X BX 2XXXXX
Thread Type
X
0—NPT
4—ACME
5—BSP
Valve Type
2
Check-O-Matic
Nozzle
XXXX
3134— Includes nozzles #31, 32, 33 & 34
3538— Includes nozzles #35, 36, 37 & 38
Example: When specifying a FLEX800 B Series Sprinkler with full circle – NPT threads #34 nozzles, you would specify: FLX34B-02-3134
Optional
X
E—Effluent Model
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 65
65
3/6/19 1:22 PM
FLEX800 ™ 35-6B/34B/35B SERIES GOLF ROTORS
FLEX800 35-6B SERIES PERFORMANCE CHART—25°
Nozzle Set 30 Nozzle Set 31 Nozzle Set 32 Nozzle Set 33 Nozzle Set 34 Nozzle Set 35 Nozzle Set 36 Nozzle Set 37 Nozzle Set 38
(White)
102-2208
(Yellow)
102-4587
(Blue)
102-4588
(Brown)
102-4589
(Orange)
102-0728
(Green)
102-0729
(Gray)
102-0730
(Black)
102-4261
(Red)
102-6909
Base
Pressure
Gray Blue Gray Gray Gray Gray Gray Gray Blue Red Gray Orange Orange Gray Blue Blue Orange Blue
102-2925 102-2910 102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910 102-2925 102-2910 psi
50
60
70
80
90
Back Nozzle 102-4335 Red Plug
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
42
43
45
7.1
7.9
8.8
46 9.6
47 10.4
100 48 11.2
Stator 102-6929 Blue
Conversions
52
54
55
57
58
14.0
15.2
16.4
17.4
18.5
59 19.4
58
60
63
65
68
18.0
19.5
21.0
22.6
23.9
—
66
68
70
72
70 25.2
74
102-1939 Yellow
INF35-6-3134
—
21.9
23.6
25.3
26.8
28.2
—
—
74
77
79
80
—
—
—
—
—
—
32.7
77 35.2
35.1
37.0
38.9
79
82
84
37.7
9.9
41.8
—
—
—
84
86
—
—
—
39.6
41.9
—
—
—
86
88
88 44.1
90
102-1940 White
INF35-6-3537
—
—
—
43.4
45.9
48.4
—
—
—
90
93
95
—
—
—
47.5
50.0
52.5
FLEX800 B Series with mainless short radius nozzle configuration.
66
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 66 3/6/19 1:22 PM
FLEX800 ™ 35-6B/34B/35B SERIES GOLF ROTORS
FLEX800 35B SERIES PERFORMANCE CHART—25°
Nozzle Set 30 Nozzle Set 31 Nozzle Set 32 Nozzle Set 33 Nozzle Set 34 Nozzle Set 35 Nozzle Set 36 Nozzle Set 37 Nozzle Set 38
Front
Nozzle
Positions
(White Plug)
102-2208
(Yellow)
102-6906
(Blue)
102-0726
(Brown)
102-6907
(Orange)
102-0728
(Green)
102-6955
(Gray)
102-6935
(Black)
102-6936
(Red)
102-6909
Yellow Beige Yellow Brown Yellow Yellow Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green Green Green
102-5670 102-6942 102-5670 102-5671 102-5670 102-6884 102-5670 102-6884 102-5670 102-6884 102-5670 102-6885 102-6531 102-6885 102-6531 102-6885 102-6531 102-6885 psi
50
60
70
80
90
Back Nozzles 102-4335 Red Plug
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
43
44
45
46
47
8.2
9.3
10.4
11.5
12.5
100 47 13.4
Stator 102-6929 Blue
Conversions
55
56
58
59
60
61
13.6
15.0
16.2
17.3
18.4
19.3
56
58
60
62
64
65
18.3
20.1
21.8
23.3
24.7
—
63
65
67
69
—
24.2
26.3
28.0
29.8
26.0
70
102-1939 Yellow
FLX35-3134
31.4
—
—
69
71
73
74
—
—
30.0
32.1
34.2
35.9
—
—
73
75
77
79
—
—
37.0
39.6
42.0
44.2
—
—
—
78
80
81
—
—
—
42.9
45.4
—
—
—
80
82
48.8
83
102-1940 White
FLX35-3537
—
—
—
48.6
51.5
54.2
—
—
—
85
88
90
—
—
—
50.6
53.6
56.3
FLEX800 34B SERIES PERFORMANCE CHART—25°
Nozzle Set 31 Nozzle Set 32 Nozzle Set 33
Front
Nozzle
Positions
(Yellow)
102-0725
(Blue)
102-7001
(Brown)
102-0727
Nozzle Set 34 Nozzle Set 35
(Orange)
102-7002
(Green)
102-6908
Nozzle Set 36 Nozzle Set 37
(Gray)
102-0730
(Black)
102-4261
Nozzle Set 38
(Red)
102-4260
Front Nozzles 102-4335 Red Plug Red Plug Brown Red Plug Brown
102-4335 102-6883 102-4335 102-6883
Back
Nozzle
Positions psi
50
60
70
80
90
100
Stator
Conversions
Yellow Blue Yellow Orange Yellow Red Yellow Beige Yellow Beige Yellow Red Yellow Gray Yellow Gray
102-6937 102-2925 102-6937 102-2926 102-6937 102-2928 102-6937 102-2929 102-6937 102-2929 102-6937 102-6944 102-6937 102-6945 102-6937 102-6945
Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm Radius gpm
57
58
59
13.0
14.1
15.5
58
60
61
15.5
17.2
18.2
—
67
69
—
23.6
26.2
—
—
73
—
—
30.0
—
—
78
—
—
35.7
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
60
61
62
16.2
17.5
18.8
63
65
66
20.5
22.0
23.4
72
74
75
102-6929 Blue
27.9
29.7
31.4
76
78
79
32.1
34.1
36.0
80
82
84
38.2
40.5
42.7
83
86
88
40.9
43.4
45.8
85
88
91
102-1940 White
42.1
44.5
46.9
91
93
95
50.2
52.8
55.4
FLX34-3134 FLX34-3537
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
" swing joint at flows over 25-gpm (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Note: Main Nozzle Adapter Data Located on Page 68. Back Nozzle Data Located on Page 73.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 67
67
3/6/19 1:22 PM
MAIN NOZZLE ADAPTER
Performance Charts
INTERMEDIATE NOZZLE PERFORMANCE CHARTS psi
50
60
65
70
102-2929
Beige
Pressure
BAR
3.4
4.1
4.5
4.8
80
90
100
5.5
6.2
6.9
Trajectory gpm
8.1
Flow lpm
30.7
8.9
9.3
9.6
33.7
35.2
36.3
10.3
10.9
11.5
39.0
41.3
43.5
30° 25° 20° 15° 10° 7°
Radius Radius Radius Radius Radius
Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet
53 17.4
52 17.1
50 16.4
48 15.7
45 14.8
42
Radius
Meters
13.8
57
58
59
18.7
19.0
19.4
56
56
57
18.4
18.4
18.7
53
54
56
17.4
17.7
18.4
51
51
53
16.7
16.7
17.4
47
49
50
15.4
16.1
16.4
45
46
48
14.8
15.1
15.7
61
63
65
20.0
20.7
21.3
60
61
63
19.7
20.0
20.7
58
59
60
19.0
19.4
19.7
56
57
58
18.4
18.7
19.0
53
54
55
17.4
17.7
18.0
50
51
51
16.4
16.7
16.7
102-2926
Orange
Pressure psi
50
BAR
3.4
60
65
70
80
90
100
4.1
4.5
4.8
5.5
6.2
6.9
102-2925
Blue
Pressure psi
50
BAR
3.4
60
65
70
80
90
100
4.1
4.5
4.8
5.5
6.2
6.9
102-2928
Red
Pressure psi
50
BAR
3.4
60
65
70
80
90
100
4.1
4.5
4.8
5.5
6.2
6.9
50
60
65
70
102-2927
Gray
Pressure psi BAR
3.4
4.1
4.5
4.8
80
90
100
5.5
6.2
6.9
Trajectory gpm
6.3
Flow lpm
23.8
7.0
7.2
7.5
8.0
8.5
9.0
26.5
27.3
28.4
30.3
32.2
34.1
Trajectory gpm
Flow lpm
5.0
5.5
5.7
5.9
18.9
20.8
21.6
22.3
6.3
6.7
7.1
23.8
25.4
26.9
Trajectory gpm
4.3
Flow lpm
16.3
4.7
4.9
5.1
5.4
5.8
6.1
17.8
18.5
19.3
20.4
22.0
23.1
Trajectory gpm
2.7
Flow lpm
10.2
3.0
3.2
3.3
3.5
3.7
3.9
11.4
12.1
12.5
13.2
14.0
14.8
30° 25° 20° 15° 10° 7°
Radius Radius Radius Radius Radius
Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet
53 17.4
51 16.7
48 15.7
46 15.1
43 14.1
40
Radius
Meters
13.1
55
56
57
59
60
61
18.0
18.4
18.7
19.4
19.7
20.0
53
54
55
58
58
59
17.4
17.7
18.0
19.0
19.0
19.4
50
52
53
56
57
57
16.4
17.1
17.4
18.4
18.7
18.7
48
49
51
54
55
55
15.7
16.1
16.7
17.7
18.0
18.0
45
47
49
52
53
53
14.8
15.4
16.1
17.1
17.4
17.4
42
44
46
49
50
50
13.8
14.4
15.1
16.1
16.4
16.4
30° 25° 20° 15° 10° 7°
53
53
54
55
55
Radius Radius Radius Radius Radius
Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet
Radius
Meters
50
52
16.4
17.1
48
50
15.7
16.4
46
48
15.1
15.7
44
46
14.4
15.1
41
43
13.5
14.1
38
40
12.5
13.1
17.4
17.4
17.7
18.0
18.0
51
51
52
53
54
16.7
16.7
17.1
17.4
17.7
49
49
50
52
53
16.1
16.1
16.4
17.1
17.4
46
47
48
50
52
15.1
15.4
15.7
16.4
17.1
44
45
46
48
50
14.4
14.8
15.1
15.7
16.4
41
42
43
45
46
13.5
13.8
14.1
14.8
15.1
30° 25° 20° 15° 10° 7°
Radius Radius Radius Radius Radius
Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet
48 15.7
46 15.1
44 14.4
42 13.8
39 12.8
35
Radius
Meters
11.5
50
51
51
52
53
54
16.4
16.7
16.7
17.1
17.4
17.7
48
49
50
51
52
53
15.7
16.1
16.4
16.7
17.1
17.4
46
47
48
50
51
52
15.1
15.4
15.7
16.4
16.7
17.1
44
45
46
48
49
50
14.4
14.8
15.1
15.7
16.1
16.4
41
42
43
45
47
48
13.5
13.8
14.1
14.8
15.4
15.7
38
39
40
42
44
45
12.5
12.8
13.1
13.8
14.4
14.8
30° 25° 20° 15° 10° 7°
Radius Radius Radius Radius Radius
Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet
42 13.8
41 13.5
39 12.8
38 12.5
36 11.8
34
Radius
Meters
11.2
43
43
44
44
45
45
14.1
14.1
14.4
14.4
14.8
14.8
42
42
42
43
44
44
13.8
13.8
13.8
14.1
14.4
14.4
40
40
41
41
42
43
13.1
13.1
13.5
13.5
13.8
14.1
39
39
39
40
41
42
12.8
12.8
12.8
13.1
13.5
13.8
37
37
38
38
39
40
12.1
12.1
12.5
12.5
12.8
13.1
35
35
36
36
37
38
11.5
11.5
11.8
11.8
12.1
12.5
68
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 68 3/6/19 1:22 PM
MAIN NOZZLE ADAPTER
Performance Charts
INTERMEDIATE NOZZLE PERFORMANCE CHARTS
70
80
90
100 psi
50
60
65
102-6885
Green
Pressure
BAR
3.4
4.1
4.5
4.8
5.5
6.2
6.9
Trajectory gpm
5.4
Flow lpm
20.4
5.9
6.1
6.3
6.7
7.1
7.4
22.3
23.1
23.8
25.4
26.9
28.0
30° 25° 20° 15° 10° 7°
Radius Radius Radius Radius Radius
Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet
51 16.7
50 16.4
48 15.7
45 14.8
42 13.8
39
Radius
Meters
12.8
52
52
53
53
54
55
17.1
17.1
17.4
17.4
17.7
18.0
51
51
52
52
53
55
16.7
16.7
17.1
17.1
17.4
18.0
49
50
50
51
52
54
16.1
16.4
16.4
16.7
17.1
17.7
46
47
47
48
50
52
15.1
15.4
15.4
15.7
16.4
17.1
43
44
44
45
47
49
14.1
14.4
14.4
14.8
15.4
16.1
41
42
42
43
45
47
13.5
13.8
13.8
14.1
14.8
15.4
102-6884
Yellow
65
70
80
90
100
Pressure psi BAR
50
60
3.4
4.1
4.5
4.8
5.5
6.2
6.9
Trajectory gpm
Flow lpm
4.1
4.5
4.7
4.8
5.1
5.4
5.8
15.5
17.0
17.8
18.2
19.3
20.4
22.0
30° 25° 20° 15° 10° 7°
50
50
51
53
54
Radius Radius Radius Radius Radius
Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet
Radius
Meters
48
49
15.7
16.1
47
48
15.4
15.7
45
47
14.8
15.4
41
44
13.5
14.4
38
41
12.5
13.5
35
38
11.5
12.5
16.4
16.4
16.7
17.4
17.7
49
49
50
52
53
16.1
16.1
16.4
17.1
17.4
48
48
49
50
51
15.7
15.7
16.1
16.4
16.7
45
45
47
48
49
14.8
14.8
15.4
15.7
16.1
42
43
44
45
46
13.8
14.1
14.4
14.8
15.1
39
40
41
42
43
12.8
13.1
13.5
13.8
14.1
102-6883
Brown
Pressure psi
50
BAR
3.4
60
65
70
80
90
100
4.1
4.5
4.8
5.5
6.2
6.9
Trajectory gpm
2.4
Flow lpm
9.1
2.6
2.7
2.8
3.0
3.2
3.4
9.8
10.2
10.6
11.4
12.1
12.9
30° 25° 20° 15° 10° 7°
Radius Radius Radius Radius Radius
Feet Meters Feet Meters Feet Meters Feet Meters Feet Meters Feet
41 13.5
40 13.1
38 12.5
36 11.8
33 10.8
30
Radius
Meters
9.8
43
44
45
46
46
46
14.1
14.4
14.8
15.1
15.1
15.1
42
42
43
45
45
45
13.8
13.8
14.1
14.8
14.8
14.8
40
41
42
43
44
44
13.1
13.5
13.8
14.1
14.4
14.4
38
39
40
41
42
43
12.5
12.8
13.1
13.5
13.8
14.1
36
37
38
40
41
41
11.8
12.1
12.5
13.1
13.5
13.5
33
34
35
36
37
38
10.8
11.2
11.5
11.8
12.1
12.5
INNER NOZZLE PERFORMANCE CHARTS*
102-6937
Yellow
Pressure psi
50
BAR
3.4
60
65
70
80
90
100
4.1
4.5
4.8
5.5
6.2
6.9
Trajectory gpm
3.7
Flow lpm
14.0
4.0
4.2
4.4
4.7
5.0
5.2
15.1
15.9
16.7
17.8
18.9
19.7
30° 25° 20°
Radius Radius Radius
Feet Meters Feet Meters Feet Meters
26 8.5
24 7.9
20 6.6
28
28
28
28
29
30
9.2
9.2
9.2
9.2
9.5
9.8
25
25
26
26
27
29
8.2
8.2
8.5
8.5
8.9
9.5
22
22
23
24
25
27
7.2
7.2
7.5
7.9
8.2
8.9
Main Nozzle Adaptor
P/N 118-1521
102-6531
Green
Pressure psi
50
BAR
3.4
60
65
70
80
90
100
4.1
4.5
4.8
5.5
6.2
6.9
Trajectory gpm
4.0
Flow lpm
15.1
4.3
4.5
4.7
5.0
5.3
5.6
16.3
17.0
17.8
18.9
20.1
21.2
30° 25° 20°
Radius Radius Radius
Feet Meters Feet Meters Feet Meters
32 10.5
30 9.8
26 8.5
34
34
34
34
34
35
11.2
11.2
11.2
11.2
11.2
11.5
31
31
31
32
32
33
10.2
10.2
10.2
10.5
10.5
10.8
27
27
28
29
29
30
8.9
8.9
9.2
9.5
9.5
9.8
* Not recommended below 20°
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 69
69
3/6/19 1:22 PM
FLEX800
™
R SERIES CONVERSION UPGRADES
The Toro FLEX800 ™ R Series Conversion Upgrades enable customers with existing Rain Bird ® Eagle ™ 900 and 1100*
Series sprinklers to upgrade to Toro’s industry leading sprinkler technology. The benefits of upgrading include the patented TruJectory ™ adjustment, full and part circle in the same sprinkler, the ability to ratchet the riser and clutch the nozzle base, and an extra 11/2” pop-up height.
FEATURES & BENEFITS
Industry's Largest Nozzle Selection
Nozzles from 42’ to 100’ radius plus a wide assortment of back nozzles lets you put the precise amount of water exactly where you need it.
20,000 Volt Lightning Rating
Spike Guard ™ solenoid virtually eliminates the need for replacements in high lightning areas. Draws half the amperage of traditional solenoids so you can run twice as many sprinklers simultaneously, reduce the cost of wire during installation or increase the distance from controller to sprinkler.
Dual TruJectory
The 25° setting provides maximum distance of throw and the 15° setting provides improved wind performance, radius reduction and obstacle avoidance (FLX54RB and FLX55RB).
True Full-Circle in One (40° - 330° part circle)
These sprinklers can be full circle today and part circle tomorrow allowing you to simply and economically adjust the area of coverage to match your seasonal needs or meet water rationing mandates (FLX55-6RB and FLX55RB).
*Rain Bird is a registered trademark of Rain Bird Corporation. Eagle is a trademark of Rain Bird Corporation.
FLX55-6RB
FLX55RB
FLX54RB
Adds 1½” of
Pop-up Height
20,000 Volt
Lightning Rating
Left: Rain Bird Eagle 900
Right: Rain Bird Eagle
900 upgraded with Toro R
Series upgrade assembly and optional Spike Guard solenoid/adapter
70
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 70 3/6/19 1:22 PM
SPECIFICATIONS
Operational
• Ratcheting riser allows riser positioning without riser removal
• Recommended Operating Pressure Range: 60-100 psi
(maximum – 150 psi and minimum – 40 psi)
• Radius reduction screw for radius refinement
• Riser pull-up feature simplifies servicing
• Effluent identifier included
• Yardage marker capable
• 3.25” pop-up clears tall grasses
Nozzles
• 4 main nozzle combinations included provides a wide range of radius and flow capabilities
• Back nozzle capable (FLX55-6RB & FLX55RB)
• Two additional front nozzle positions (FLX54RB only)
• Nozzle base clutching (FLX55-6RB & FLX55RB) allows nozzle base movement by hand
• All nozzles threaded from the front with no other disassembly required
Specifying Information—FLEX800 R Series Conversion Assemblies
Model Number
FLX55-6RB-5154
FLX55-6RB-5558
FLX55RB-5154
FLX55RB-5558
FLX54RB-5154
FLX54RB-5558
SPIKEGUARD-RB
Description
R Series Conversion with FLX55-6 riser assembly and low flow nozzle set #51 - #54
R Series Conversion with FLX55-6 riser assembly and high flow nozzle set #55 - #58
R Series Conversion with FLX55 riser assembly and low flow nozzle set #51 - #54
R Series Conversion with FLX55 riser assembly and high flow nozzle set #55 - #58
R Series Conversion with FLX54 riser assembly and low flow nozzle set #51 - #54
R Series Conversion with FLX54 riser assembly and high flow nozzle set #55 - #58
Toro solenoid adapter with Spike Guard™ solenoid for Rain Bird ® Eagle 700, 900 or 1100 Series sprinklers
Toro ® has designed and manufactured this product to fit within a sprinkler housing made by Rain Bird ® Corporation, but Toro’s product is not manufactured by or affiliated with Rain Bird ® . Rain Bird ® is a registered trademark of Rain Bird Corporation.
TORO SPRINKLER CONVERSION ASSEMBLIES
CROSS REFERENCE GUIDE
New Model Arc
Models Being Replaced
Trajectory Radius - Ft Flow - gpm 634 664 734 764 765 864S 865S 834S 835S DT34 DT35
FLX34-3134
FLX34-3537
FLX35-3134
FLX35-3537
Full Circle
Full Circle
FLX35-6-3134 Part/Full Circle
FLX35-6-3537 Part/Full Circle
25° or 15°
25° or 15°
Part/Full Circle 25° or 15°
Part/Full Circle 25° or 15°
30° - 7°
30° - 7°
52' - 79'
67' - 91'
52' - 74'
69' - 83'
46' - 80'
59' - 92'
12.9 - 34.9
32.1 - 46.9
13.6 - 34.1
33.1 - 47.3
15.5 - 37.0
32.4 - 45.3
1. Must have ribbed bodies manufactured after 1992 to use Part/Full circles.
X
X
X
X
1
1
X
X
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
CROSS REFERENCE GUIDE
New Model Arc
Models Being Replaced
Trajectory Radius - Ft Flow - gpm 654 655 670 684 690 754 784 785 884S 885S 854S 855S DT54 DT55
FLX54-5154
FLX54-5558
FLX54-59
FLX55-5154
FLX55-5558
Full Circle
Full Circle
Full Circle
25° or 15°
25° or 15°
25° or 15°
Part/Full Circle 25° or 15°
Part/Full Circle 25° or 15°
FLX55-59 Part/Full Circle 25° or 15°
FLX55-6-5154 Part/Full Circle 30° - 7°
FLX55-6-5558 Part/Full Circle
FLX55-6-59 Part/Full Circle
FLX55-5154R
FLX55-5558R
Part/Full Circle
Part/Full Circle
30° - 7°
30° - 7°
25° or 15°
25° or 15°
FLX55-59R Part/Full Circle 25° or 15°
FLX55-6-5154R Part/Full Circle 30° - 7°
FLX55-6-5558R Part/Full Circle
FLX55-6-59R Part/Full Circle
30° - 7°
30° - 7°
58' - 81'
79' - 95'
96' - 99'
55' - 75'
73' - 90'
82' - 92'
46' - 80'
59' - 95'
77' - 100' 57.0 - 61.1
55' - 75'
73' - 90'
82' - 92'
46' - 80'
13.2 - 36.7
34.2 - 55.4
2
55.6 - 61.8
14.0 - 34.5
35.3 - 53.9
57.2 - 61.3
13.9 - 38.2
33.8 - 51.1
14.0 - 34.5
35.3 - 53.9
57.2 - 61.3
13.9 - 38.2
59' - 95' 33.8 - 51.1
77' - 100' 57.0 - 61.1
2
2
3
3
3
3
3
3
2 - Requires the separate purchase and use of 102-0950 conversion adapter
3 - Use the "R" Series (Ribless body) conversion for bodies dated prior to 1992.
4 - Requires the separate purchase and use of 102-5011 690 conversion adapter
3
3
3
3
3
3
2
2
2
3
3
3
3
3
3
2
2
2
3
3
3
3
3
3
2
2
2
4
4
4
4
4
4
4
4
4
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 71
71
3/6/19 1:22 PM
FLEX800 ™ R SERIES CONVERSION UPGRADES
Main Nozzle Data
Front
Nozzle
Positions
FLX55-6RB-5154 Performance Chart
Nozzle Set 51 Nozzle Set 52 Nozzle Set 53
(Yellow)
102-4587
(Blue)
102-4588
(Brown)
102-4589
Nozzle Set 54
(Orange)
102-0728
Nozzle Set 55
FLX55-6RB-5558 Performance Chart
Nozzle Set 56 Nozzle Set 57 Nozzle Set 58
(Green)
102-0729
(Gray)
102-0730
(Black)
102-4261
(Red)
102-4260
102-2925 102-2910 102-2928 102-2910 102-2926 102-2910 102-2926 102-2910 102-2925 102-2910 102-2925 102-2910 102-2926 102-2910 102-2925 102-2910
Back
Nozzle
Positions
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 psi
60
70
80
90
100
Stator
Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm
55
56
57
58
59
16.1
17.4
18.5
19.4
20.5
63
66
68
70
72
20.3
21.8
23.3
24.5
25.9
69
70
72
75
76
102-1939 Yellow
23.4
25.3
27.0
28.5
30.0
75
76
77
79
80
31.3
33.8
36.0
38.1
40.2
—
—
80
83
86
—
—
39.1
41.5
43.7
—
—
85
87
90
—
—
41.0
43.5
—
—
88
91
45.7
94
102-1940 White
—
—
45.4
48.2
50.6
—
—
92
94
96
—
—
49.7
52.8
55.3
Front
Nozzle
Positions
FLX55RB-5154 Performance Chart
Nozzle Set 51 Nozzle Set 52 Nozzle Set 53
(Yellow)
102-6906
(Blue)
102-0726
(Brown)
102-6907
Nozzle Set 54
(Orange)
102-0728
Nozzle Set 55
FLX55RB-5558 Performance Chart
Nozzle Set 56 Nozzle Set 57 Nozzle Set 58
(Green)
102-6955
(Gray)
102-6935
(Black)
102-6936
(Red)
102-6909
102-5670 102-5671 102-5670 102-6884 102-5670 102-6884 102-5670 102-6884 102-5670 102-6885 102-6531 102-6885 102-6531 102-6885 102-6531 102-6885
Back
Nozzle
Positions psi
60
70
80
90
100
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335
Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm
56
58
59
60
61
15.2
16.5
17.5
18.4
19.3
57
60
62
64
66
20.1
21.7
23.1
24.5
25.3
66
67
68
71
72
24.3
26.2
27.8
28.8
30.3
68
71
72
74
75
28.0
30.4
31.7
34.5
36.5
—
—
76
78
80
—
—
39.7
43.1
45.5
—
—
80
81
82
—
—
43.1
45.1
49.0
—
—
83
86
90
—
—
48.2
51.2
54.5
—
—
85
87
89
—
—
53.0
56.0
59.0
72
Front
Nozzle
Positions
FLX54RB-5154 Performance Chart
Nozzle Set 51 Nozzle Set 52 Nozzle Set 53
(Yellow)
102-0725
(Blue)
102-7001
(Brown)
102-0727
Nozzle Set 54
(Orange)
102-7002
Nozzle Set 55
FLX54RB-5558 Performance Chart
Nozzle Set 56 Nozzle Set 57 Nozzle Set 58
(Green)
102-6908
(Gray)
102-0730
(Black)
102-4261
(Red)
102-4260
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Brown Red Plug Brown
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-6883 102-4335 102-6883
Back Nozzle
Positions Yellow Blue Yellow Orange Yellow Red Yellow Beige Yellow Beige Yellow Red Yellow Gray Yellow Gray
102-6937 102-2925 102-6937 102-2926 102-6937 102-2928 102-6937 102-2929 102-6937 102-2929 102-6937 102-2928 102-6937 102-4965 102-6937 102-4965 psi
60
70
80
90
100
Stator
Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm Rad/Ft gpm
59
60
61
62
63
14.6
15.7
16.4
17.8
18.1
62
63
64
66
67
17.4
18.8
20.0
21.3
23.6
68
70
72
74
75
102-6929 Blue
24.3
26.3
27.6
29.9
30.4
71
75
78
80
81
28.2
30.6
32.6
34.7
36.7
—
—
83
85
87
—
—
39.5
41.6
43.7
—
—
85
88
90
—
—
42.7
44.9
—
—
87
90
46.8
93
102-1940 White
—
—
45.9
48.5
51.2
—
—
91
93
95
—
—
50.2
52.8
55.4
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1 1 ⁄
4
" swing joint at flows over 25-gpm (95-LPM). Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 72 3/6/19 1:22 PM
FLEX800 ™ R SERIES CONVERSION UPGRADES
Mainless Data
FLX55-6RB SERIES MAINLESS NOZZLE PERFORMANCE DATA psi
65
SOR
80
SOR
Blue Plug Gray
102-2925 102-2208 102-2910
Radius
46
5:02
46 gpm
8.7
9.6
4:22
Orange Plug Gray
102-2926 102-2208 102-2910
Radius
46
4:16
47 gpm
10.4
11.5
3:40
Red Plug Gray
102-2928 102-2208 102-2910
Radius
50
3:36
53 gpm
12.4
13.7
3:03
Gray Plug Gray
102-2910 102-2208 102-2910
Gray Plug Gray
102-2930 102-2208 102-2910
Radius
42
4:19 gpm
10.2
Radius
47
4:06 gpm
13.9
44 11.2
51 15.3
3:53 3:40
Requires the low-flow stator 102-6929 for indicated rotation speeds.
SOR: Speed of rotation
FLX55RB MAINLESS NOZZLE PERFORMANCE DATA psi
65
SOR
80
SOR
Green Plug Gray
102-6531 102-2208 102-2910
Radius
34 gpm
10.4
3:40
37 11.6
3:15
Green Plug Green
102-6531 102-2208 102-6885
Radius
44 gpm
10.2
44
3:50
3:25
11.4
Green Plug Red
102-6531 102-2208 102-2928
Green Plug Beige
102-6531 102-2208 102-2929
Radius
48
48 gpm
11.5
Radius
50 gpm
13.5
3:25 2:40
12.9
50 15.0
3:00 2:30
Requires the low-flow stator 102-6929 for indicated rotation speeds.
SOR: Speed of rotation
Back Nozzle Performance Data
Nozzles
Part #
102-6937
102-6531
102-6883
Description
Inner Nozzle w/ Yellow Restrictor
Inner Nozzle w/ White Restrictor
Intermediate Nozzle
Color
Yel/Yel
Grn/Wht
Brown
102-6884
102-6885
102-2925
102-2926
102-2927
102-2928
102-2929
Intermediate Nozzle
Intermediate Nozzle
Intermediate Nozzle
Intermediate Nozzle
Intermediate Nozzle
Intermediate Nozzle
Intermediate Nozzle
Yellow
Green
Blue
Orange
Gray
Red
Beige
40
44
46
48
51
Radius
29
65 psi gpm
3.7
31
38
4.3
2.8
41
42
4.1
5.4
2.8
4.3
5.1
6.5
8.1
42
45
47
50
53
Radius
30
80 psi gpm
4.1
33
38
4.6
2.8
43
45
4.5
6.0
3.2
4.8
5.4
7.0
9.1
Profile
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 73
73
3/6/19 1:22 PM
T7 SERIES ROTORS
The T7 Series sprinkler is built rugged to withstand harsh golf course conditions. The low-flow version is perfect for shorter-radius golf course applications like tee boxes, surrounds and perimeters. The T7 has been designed and tested to ensure the high reliability demanded by the market.
FEATURES & BENEFITS
Water is Evenly Distributed
High efficiency nozzles with single port design ensure water is evenly distributed across the pattern.
Versatility
Available in standard and low-flow models to meet your application needs.
Vandal and Abuse Resistant
The Smart Arc ™ memory safely returns the sprinkler to previously set arc even when turned beyond arc borders.
Clears Tall Grasses
The 5.75 inch pop-up ensures proper spray pattern and nozzle distribution uniformity even in taller grasses.
Additional Features
Standard check valve
Radius reduction screw
– up to 25%
Threaded cap-retained riser assembly
Variable reversing stator
74
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 74
Slip clutch
Riser pull-up feature – adjustment/pull-up tool supplied
Locking cap screw
3/6/19 1:22 PM
Model Choices
Plastic or stainless steel models
Low-Flow or High-Flow models
Effluent water indicator models
Top Arc Indication
Arc setting indicator on top of the rotor allows for easy wet or dry adjustments.
Part or full-circle from 45° to 360°.
SPECIFICATIONS
Operational
• Inlet size: 1” threaded ACME
• Radius:
- Low-flow models: 38’ – 56’
- High-flow models: 46’ – 75’
• Flow rate:
- Low-flow models: 1.7 – 13.0 gpm;
6 nozzle tree included with each head (2, 3, 4.5, 6, 7.5 and 9)
- High-flow models: 6.8 – 30.5 gpm;
7 nozzle tree included with each head (7, 9, 12, 16, 20, 24 and 27)
• Operating pressure: 40-100 psi
• Arc adjustment: 45° - 360° (unidirectional at 360°)
Dimensions
• Body diameter: 2.7”
• Body height: 8.8”
• Rubber cover diameter: 2.2”
• Pop-up height to nozzle: 5.75”
Warranty
• Five years
70
80
90
100
40
50
60
70
60
70
80
90
100
40
50
60
50
60
70
80
90
100
40
50
40
50
60
70
80
90
100
40
90
100
40
50
60
70
80
90
100
80
90
100
40
50
60
70
80
NOZZLE PERFORMANCE DATA-HIGH FLOW MODELS
Nozzle
7.0
9.0
12.0*
16.0
20.0
24.0
27.0
psi Radius (ft) gpm
Precip. Rate
(in/hr) ▲
1.09
1.10
1.14
1.17
1.28
1.22
1.21
1.26
0.91
0.96
0.99
1.02
1.04
1.06
1.06
1.04
0.73
0.76
0.81
0.80
0.82
0.84
0.89
0.90
0.72
0.75
0.78
0.82
0.83
0.85
0.83
0.76
1.20
1.16
1.42
1.16
1.05
1.10
1.14
1.18
1.21
1.19
1.23
1.25
1.27
1.09
1.11
1.14
1.15
53
58
60
61
59
61
62
63
57
53
56
58
53
54
55
56
55
56
50
51
50
51
52
54
51
52
54
47
46
47
48
49
71
72
73
74
75
68
71
55
65
60
63
65
67
65
66
67
52
17.5
18.8
20.0
21.1
16.0
17.5
19.5
20.6
12.7
13.8
14.7
15.6
16.5
13.0
15.1
16.2
8.3
8.7
9.4
9.9
10.9
11.5
9.5
11.6
6.6
7.4
8.1
8.8
9.4
10.3
10.7
7.4
23.8
25.3
18.7
23.4
23.6
25.8
27.4
29.1
30.6
22.2
23.6
24.8
15.8
17.5
19.3
20.7
22.3
Precip. Rate
(in/hr) ■
0.95
0.95
0.98
1.01
1.10
1.05
1.05
1.09
0.79
0.83
0.86
0.88
0.90
0.92
0.92
0.90
0.64
0.66
0.70
0.69
0.71
0.73
0.77
0.78
0.62
0.65
0.68
0.71
0.72
0.73
0.72
0.66
1.04
1.01
1.23
1.00
0.91
0.95
0.99
1.02
1.05
1.03
1.06
1.09
1.10
0.95
0.96
0.99
1.00
NOZZLE PERFORMANCE DATA-LOW FLOW MODELS
Nozzle psi Radius (ft) gpm
2.0
3.0*
4.5
6.0
7.5
9.0
70
80
90
100
40
50
60
70
60
70
80
90
100
40
50
60
80
90
100
40
50
60
70
80
90
100
50
60
70
80
90
100
40
50
40
50
60
70
80
90
100
40
44
46
48
49
49
49
50
50
43
43
46
48
41
42
42
43
49
51
53
55
50
50
52
45
55
56
42
43
38
41
40
41
41
42
40
41
41
39
39
39
40
40
7.0
7.4
7.9
8.4
5.8
6.7
7.4
8.0
5.2
5.7
6.1
6.5
6.9
5.0
5.7
6.3
8.8
9.5
10.0
7.4
8.5
9.4
10.4
11.3
12.0
12.8
2.8
3.1
3.4
3.6
3.9
4.1
4.1
4.7
1.7
2.0
2.2
2.4
2.6
2.7
2.9
2.4
† When the sprinkler is adjusted to 360°, it will be uni-directional in that direction of rotation
(clockwise or counterclockwise) at the moment when the sprinkler was changed to 360°
* Pre-installed nozzle. Data based on 180°.
Precip. Rate
(in/hr) ▲
0.65
0.68
0.70
0.74
0.66
0.70
0.71
0.75
0.68
0.71
0.77
0.78
0.83
0.59
0.59
0.61
0.78
0.84
0.81
0.81
0.78
0.80
0.83
0.83
0.89
0.90
0.39
0.41
0.45
0.46
0.47
0.49
0.63
0.62
0.25
0.29
0.30
0.33
0.35
0.36
0.38
0.36
Precip. Rate
(in/hr) ■
0.57
0.59
0.61
0.64
0.58
0.60
0.62
0.65
0.59
0.62
0.66
0.68
0.72
0.51
0.51
0.52
0.67
0.73
0.70
0.70
0.68
0.70
0.72
0.72
0.77
0.78
0.33
0.36
0.39
0.40
0.41
0.42
0.54
0.53
0.22
0.25
0.26
0.28
0.31
0.31
0.33
0.31
Description
T7P
T7P—Sports Rotor
Specifying Information—T7 Series Rotors
T7P SS -42 XX
Optional
SS
SS—Stainless Steel Riser
Thread
42
42–ACME Thread
Optional
X
E—Effluent L—Low Flow
Example: A low flow T7P sprinkler with a stainless steel riser and effluent rubber cover would be specified as T7PSS-42LE
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 75
75
3/6/19 1:22 PM
690 SERIES ROTORS
For nearly 50 years the 690 Series has set the standard for durability and reliability in golf applications. Two
2-speed models provide a slower speed in the non-overlap areas and a faster speed in the overlap areas to provide a more balanced precipitation rate than traditional single speed full circle sprinklers in these applications which lowers system costs.
FEATURES & BENEFITS
696 2-Speed Models
Used in single row applications these sprinklers operate at a slower speed over the 60 degree non-overlap area and a faster speed over the 120 degree overlapped areas to provide a balanced application rate.
698 2-Speed Models
Used in double row applications these sprinklers operate at a slower speed over the 180 degree non-overlap area and a faster speed over the 180 degree overlapped areas to provide a balanced application rate.
Artificial Playing Surfaces
Radius and flow capabilities are perfect for cooling and rinsing artificial playing surfaces.
Electric Valve In Head Models
Electric valve in head models provide individual head control that ensures run times can match differing soil, turf and terrain watering requirements, pressure regulation to ensure all nozzles perform at the same pressure and manual ON-OFF-Auto control at the head.
Additional Features
Manual control at the sprinkler, On-Off-Auto (electric)
Time-proven, gear-drive design
All internal components serviceable from the top of the sprinkler
Durable engineering plastic and stainless steel construction
Nine arc selections
76
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 76 3/6/19 1:22 PM
690 SERIES CONVERSIONS AND RISERLESS BODIES
Model Description
69A-92 CONV,150DEG,92NOZ
69B-92 CONV,165DEG,92NOZ
69C-92 CONV,195DEG,92NOZ
69D-92 CONV,210DEG,92NOZ
691-91 CONV,90DEG,91NOZ
691-92 CONV,90DEG,92NOZ
692-90 CONV,180DEG,90NOZ
692-91 CONV,180DEG,91NOZ
692-92 CONV,180DEG,92NOZ
694-90 CONV,360DEG,90NOZ
694-91 CONV,360DEG,91NOZ
694-92 CONV,360DEG,92NOZ
696-91 CONV,60X120DEG,2SPD,91NOZ
696-92 CONV,60X120DEG,2SPD,92NOZ
698-91 CONV,180X180DEG,2SPD,91NOZ
698-92 CONV,180X180DEG,2SPD,92NOZ
690-06-1 BODY,RISERLESS,690,ADJPSI,STD
690-06-2 BODY,RISERLESS,690,ADJPSI,SG
690-06-4 BODY,RISERLESS,690,ADJPSI,DCL
690-COM BODY,RISERLESS,690,CHECK-O-MATIC
690-NO BODY,RISERLESS,690, NORMALLY OPEN
SPECIFICATIONS
Operational
• Inlet: 1½” NPT
• Radius: 87’ – 108’
• Flow Rate: 51.0 – 82.2 gpm
• Recommended Operating Pressure Range: 80-100 psi
Maximum pressure: 150 psi
Minimum pressure: 40 psi
• Electric Valve-In-Head Solenoid: 24V ac, 50/60 Hz
- Inrush: 60 Hz, 0.30 Amps
- Holding: 60 Hz, 0.20 Amps
• Check-O-Matic: Maintains 37’ of elevation
Dimensions
• Body diameter: 10”
• Body height: 16”
• Weight: 5.6 lbs.
• Pop-up height to nozzle: 3/4”
Warranty
• Three years
• Five years when installed with Toro Swing Joints
698
180 x 180 2SPD
696
60 x 120 2SPD
694
360º
69D
240º
69C
210º
692
180º
690 SERIES PERFORMANCE CHART
Base
Pressure psi
80
100
Nozzle Set
90
Radius
87
90
Nozzle Set
91
Nozzle Set
92 gpm Radius gpm Radius
51.0
96 61.2
100
57.1
100 73.5
108 gpm
74.0
82.2
Radius shown in feet.
Sprinkler radius of throw per ASAE standard S398.1.
69B
150º
69A
120º
691
90º
Fixed Arc Drives
Nine fixed arc drive assemblies ensure positive retention of the coverage area with no arc drift.
Specifying Information—690 Series Rotors
Arc
69 X
1—90°
2—180°
4—Full-circle
6—Full-circle, 2-speed (60°–120°)
8—Full-circle, 2-speed (180°–180°)
69 X -0 X XXX
Valve-In-Head Type
0 X
1—Normally Open
Hydraulic
2—Check-O-Matic
6—Electric
Nozzle
XX
90
91
92
Pressure Regulation*
X
8—80 psi
1—100 psi
Example: When specifying a 690 Series Sprinkler with a 180° arc, electric valve-in-head, #91 nozzle, and pressure regulation at 80 Psi, you would specify: 692-06-918
*Electric models only.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 77
77
3/6/19 1:22 PM
590GF SERIES SPRAYS
Toro’s 590GF Series is the first spray head designed specifically for golf course irrigation with enhanced water management capabilities. The 590GF is built for the tough golf course environment, including harsh debris situations like top-dressing and sand, high water pressures, and daily mower and foot traffic. The 590GF is perfect around bunkers, on small tee boxes, and around the clubhouse. And with its patented X-Flow technology, the 590GF has a built-in shutoff device should a nozzle be damaged or removed and it’s standard check valve feature minimizes low head drainage.
FEATURES & BENEFITS
Nozzle Options
In addition to the full line of Toro MPR, TVAN and specialty nozzles the 590GF accepts the revolutionary Precision ™ Spray and
Precision ™ Rotating Series nozzles with optimized distribution uniformity that provides exceptional turf conditions with minimal water usage.
590GF-6
590GF-12
Designed Flush Rate
Sprinkler flushes during pop-up and retraction clearing debris from around the riser to eliminate stick-ups and ensure positive sealing and retraction.
X-Flow ® Shut Off Device
The X-Flow shut off feature stops the flow of water if the nozzle is damaged or removed to eliminate flooding, water waste and soil erosion.
Prevent Low Head Drainage
The standard check valve prevents low head drainage with up to
10’ of elevation change minimizing soil erosion and water waste.
590GF-4
78
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 78 3/6/19 1:22 PM
Without X-Flow ®
Water waste, soil erosion and flooding occur
SPECIFICATIONS
Operational
• Radius: 2’ – 26’
• Recommended pressure range: 25-50 psi
(maximum – 75 psi)
• Flow rate: 0.05 – 4.5 gpm
• 2 gpm flush rate
Dimensions
• Body diameter:
- 1 3 /
8
” on 4P and 6P
- 1 5 /
8
” on 12P
• Cap diameter: 2”
• Inlet: 1 /
2
” female-threaded
Warranty
• Three years
Additional Features
Stainless steel retraction spring
All bodies shipped with flush plug in place
Ratcheting riser feature for arc adjustment
Risers and Extenders
570-6X
• Male-inlet threads install onto any 590GF sprinkler to provide a 6" extension
• Maximum pressure: 75 psi
570SR-6 and 570SR-18 Risers
• 1⁄2" male-threaded inlet for installation on pipe fittings
• Maximum pressure: 75 psi
• Height: 6" and 18"
With X-Flow ®
Eliminates water waste, soil erosion and flooding
Flanged Cap
Flanged cap installs below grade to stabilize the body position and maintain optimum nozzle performance.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 79
Specifying Information—590GF Series Sprays
590GFXX E
Model
590GF
590GF—590GF Series Sprays
Pop-Up Height
XX
4—4” Pop-Up
6—6” Pop-Up
12—12” Pop-Up
Optional
E
E—Effluent
79
3/6/19 1:22 PM
PRECISION
™
SERIES ROTATING NOZZLE
80
Making use of the same patented gear drive technology found in Toro’s world-leading Golf rotors, Toro ® Precision ™
Series Rotating Nozzles are powered by a planetary drive system that delivers a pattern of multiple wind resistant, multi-trajectory streams. The full circle and adjustable arc models deliver a radius range of 14 to 26 feet with exceptional uniformity and close-in watering characteristics at a precipitation rate of 0.6 inches per hour.
FEATURES & BENEFITS
Consistent, Gear-Driven Performance
Precision ™ Series Rotating Nozzles are uniquely powered by a patented planetary gear drive, variable stator and turbine. Unlike competing rotating nozzles, the Precision ™ Series Rotating Nozzle’s gear drive is not system pressure dependent and delivers consistent rotation speed and performance across a wide range of operating pressures. The entire drive system is protected by the factory-installed fine mesh filter screen.
Fewer Models
Two Toro-threaded models and two female-threaded models are all that are required to cover radius requirements of 14 to 26 feet and infinitely adjustable arcs between 45° and 270º or 360º. Fewer models allow for less inventory and more flexibility.
Matched Precipitation Rate
These nozzles deliver water more slowly and evenly than standard spray nozzles, which helps prevent runoff and water waste. Moreover, the 0.6” per hour precipitation rate better positions users to meet watering window requirements than competing rotating nozzles.
EZ ARC ™ Visual Arc Indicators
Toro Precision ™ Series Rotating Nozzles are the only rotating nozzles available that allow the user to dial in the nozzle’s arc setting before installation. Further, the nozzle features a right edge call-out on adjustable models that assists in quick and effective installations.
Female-threaded
PRN-A
Female-threaded
PRN-F
Male-threaded
PRN-TA
Male-threaded
PRN-TF
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 80 3/6/19 1:22 PM
WATER MANAGEMENT
HIGHLIGHT
Precision ™ Series Rotating Nozzle
Shrub & Slope Kit
Fully-assembled kit includes Precision ™ Rotating
Nozzle, 570S Shrub riser with patented X-Flow®
Technology, and Precision ™ Check Valve. This watersaving combination is ideally suited for stationary above-ground applications, such as slopes, shrub irrigation, and nursery settings.
(PRNA-S-PCV, PRNF-S-PCV)
SPECIFICATIONS
Operational
• Radius: 14’-26’
• Operating pressure range: 20-75 psi
• Recommended operating pressure: 45 psi
• Flow Rate: 0.17-3.68 gpm
Warranty
• Two years
Additional Features
Maximum trajectory height of 20° to help fight wind
Threads onto nearly all manufacturers’ spray heads and shrub adapters
Pre-attached screen for easy installation
Radius reduction up to 25% by turning set screw
Color-coded to easily identify adjustable and full circle models
PRECISION ™ SERIES ROTATING NOZZLES PERFORMANCE DATA
Arc
45°
90°
120°
180°
240°
270°
360° psi
60
75
20
30
40
50
20
30
40
50
40
50
60
75
60
75
40
50
60
75
20
30
60
75
20
30
20
30
40
50
60
75
20
30
20
30
40
50
40
50
60
75 gpm
23.0
25.0
15.0
17.2
20.9
22.9
20.0
21.5
22.5
24.0
14.0
16.0
19.0
21.5
23.8
25.6
20.5
22.5
24.0
26.0
15.0
17.0
16.4
17.5
20.2
22.5
23.5
25.0
15.0
17.0
14.0
15.0
17.0
18.5
19.5
22.0
16.0
17.5
20.5
22.5
23.5
25.0
2.26
2.60
1.81
2.00
2.56
3.09
1.56
1.80
1.95
2.20
1.08
1.23
1.62
2.00
3.34
3.68
1.22
1.46
1.61
1.81
1.12
1.27
0.48
0.57
0.78
0.97
1.07
1.18
0.83
0.94
0.17
0.19
0.25
0.31
0.35
0.43
0.43
0.49
0.62
0.75
0.82
0.92
Radius
Precip. Rate n (in./hr.)
Precip. Rate
(in./hr.)
0.55
0.53
0.77
0.65
0.56
0.57
0.56
0.56
0.56
0.55
0.71
0.62
0.57
0.55
0.57
0.54
0.56
0.56
0.54
0.52
0.72
0.63
0.69
0.72
0.55
0.55
0.56
0.55
0.71
0.63
0.67
0.65
0.67
0.70
0.71
0.68
0.65
0.62
0.57
0.57
0.57
0.57
0.63
0.61
0.89
0.75
0.65
0.65
0.65
0.65
0.64
0.64
0.81
0.71
0.66
0.64
0.66
0.62
0.65
0.64
0.62
0.60
0.83
0.73
0.79
0.83
0.64
0.64
0.65
0.63
0.82
0.72
0.77
0.75
0.77
0.81
0.82
0.79
0.75
0.71
0.66
0.66
0.66
0.65
Nozzle data subject to change.
PRECISION ™ SERIES ROTATING NOZZLE MODEL LIST
Toro (male)-threaded
PRN-TA
PRN-TF
Female-threaded
PRN-A
PRN-F
Shrub & Slope Kit
PRNA-S-PCV
PRNF-S-PCV
Description
14-26 feet, Adjustable from 45°-270°
14-26 feet, Full circle
14-26 feet, Adjustable from 45°-270°
14-26 feet, Full circle
Adjustable arc kit with X-Flow® and 15' Check Valve
Full Circle kit with X-Flow® and 15' Check Valve
Steps
180° working pattern
Step-Up ™ Technology
Enables the delivery of a highly uniform pattern of water all the way out to the furthest point of the radius. The unique steps create fifteen streams, each designed to cover an area of the pattern.
Precision ™ Series Rotating Nozzle Visual Arc Adjustment
The unique arc adjustment ring dial allows for pre-setting the arc by hand or with the PRNTOOL before the nozzle is installed or quickly after the nozzle is threaded onto the spray head and under pressure.
Specifying Information—Precision
Model
PRN
PRN—Precision ™
Rotating Nozzle
™
PRNXX
Thread
X
T—Toro (male)-thread
Blank—Female-thread
Steps
Right Edge
Series Rotating Nozzle
Arc
A—Adjustable
F— Full circle
X
Example: A male threaded Precision ™ Series Rotating nozzle with a 24’ radius and a 180° arc would be specified as: PRN-TA
A female threaded Precision ™ Series Rotating nozzle with a 20’ radius and 360° arc would be specified as: PRN-F
Note: For optimal performance in dirty water applications, a minimum of 120 mesh primary filtration is recommended.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 81
81
3/6/19 1:22 PM
PRECISION
™
SERIES SPRAY NOZZLES
Toro ® Precision ™ Series Spray Nozzles are the most efficient spray nozzles available and feature proprietary
H 2 O Chip Technology. With a precipitation rate of 1” per hour, Precision ™ Series Spray Nozzles help irrigation professionals better manage water usage, eliminate runoff, and reduce their customers’ water bills. These nozzles are available in a wide variety of arcs and radii, as well as Toro (male) and female-threaded bodies, making them ideal for large scale installations and retrofits. In addition, the best-in-class Precision ™ Series
Spray nozzles are available with factory-installed Pressure Compensating Discs (PCD).
FEATURES & BENEFITS
Patented H 2 0 Chip Technology
Each nozzle contains one or more H 2 O chips that create a high frequency oscillating stream and deliver a precipitation rate of
1” per hour – an industry first – while using up to 35% less water than a standard MPR nozzle.
Pressure-Compensating Versions Available
At a fraction of the cost of a pressure-regulating spray head, pressure-compensating Precision ™ Series Spray Nozzles maintain a 1” per hour precipitation rate and minimize misting and water waste that results from higher pressure systems.
Design and Retrofit Effectiveness
The lower flow rate of Precision ™ Series Spray Nozzles maximizes design efficiency and helps reduce overall material costs based on the need for fewer valves and controller stations.
Third-Party Performance Validation
Precision ™ Series Spray Nozzles* have been tested and validated in the field and at the Center for Irrigation Technology (CIT).
* non-PCD models only
Male-threaded
Model
Pressure Compensating Disc (PCD)
The elastomeric PCD adjusts in response to changes in inlet pressure to maintain optimal nozzle performance. Recommended for use on systems operating above 40 psi,
PCD models can easily be identified by the red Toro lettering across the top of the nozzle.
Female-threaded
Model
82
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 82 3/6/19 1:22 PM
WATER MANAGEMENT HIGHLIGHT SPECIFICATIONS
Operational
• Radius: 5’-15’
• Operating pressure range: 20-75 psi
• Recommended operating pressure: non-Pressure Compensating—30 psi,
Pressure Compensating—50 psi
• Flow Rate: 0.04-2.4 gpm
• Nozzle trajectory:
- 5’: 5°
- 8’: 10°
- 10’: 15°
- 12’: 20°
- 15’: 27°
- Corner and Side Strips: 20°
Warranty
• Two years
Standard
Spray Nozzles
Precision ™ Spray
Series Nozzles
Patented H 2 0 Chip Technology Delivers Improved Uniformity
Water enters a specially designed chamber within the H 2 O Chip where the water expands and collapses, creating an oscillating effect. Consistent-sized water droplets exit the Chip in the designed arc pattern and radius with clean edge definition, class-leading distribution uniformity, and reduced water usage.
Additional Features
Specialty Arcs available (60°, 120°, 150°, 210°*, 240°)
Radius reduction capability of 25%
Matched precipitation rate after radius adjustment
PRECISION ™ SERIES SPRAY NOZZLE MODEL LIST
5’ NOZZLE (RED) 8’ NOZZLE (GREEN)
Male
O-T-5-60
O-T-5-Q
O-T-5-T
O-T-5-150
O-T-5-H
O-T-5-210
O-T-5-TT
O-T-5-TQ
O-T-5-F
O-T-15-60
O-T-15-Q
O-T-15-T
O-T-15-150
O-T-15-H
O-T-15-210
O-T-15-TT
O-T-15-TQ
O-T-15-F
Female Pattern Male
O-5-60
O-5-Q
60° Arc
90° Arc
O-T-8-60
O-T-8-Q
O-5-T
O-5-150
O-5-H
O-5-210
O-5-TT
O-5-TQ
O-5-F
120° Arc
150° Arc
180° Arc
210° Arc
240° Arc
270° Arc
360° Arc
O-T-8-T
O-T-8-150
O-T-8-H
O-T-8-210
O-T-8-TT
O-T-8-TQ
O-T-8-F
10’ NOZZLE (BLUE)
O-T-10-60
O-T-10-Q
O-T-10-T
O-T-10-150
O-T-10-H
O-T-10-210
O-T-10-TT
O-T-10-TQ
O-T-10-F
15’ NOZZLE (BLACK)
O-10-60
O-10-Q
O-10-T
O-10-150
O-10-H
O-10-210
O-10-TT
O-10-TQ
O-10-F
O-15-60
O-15-Q
O-15-T
O-15-150
O-15-H
O-15-210
O-15-TT
O-15-TQ
O-15-F
60° Arc
90° Arc
120° Arc
150° Arc
180° Arc
210° Arc
240° Arc
270° Arc
360° Arc
60° Arc
90° Arc
120° Arc
150° Arc
180° Arc
210° Arc
240° Arc
270° Arc
360° Arc
Male
O-T-4X9-RCS
O-T-4X9-LCS
O-T-4X18-SST
O-T-4X15-RCS
O-T-4X15-LCS
O-T-4X30-SST
Female
O-8-60
O-8-Q
O-8-T
O-8-150
O-8-H
O-8-210
O-8-TT
O-8-TQ
O-8-F
12’ NOZZLE (BROWN)
O-T-12-60
O-T-12-Q
O-T-12-T
O-T-12-150
O-T-12-H
O-T-12-210
O-T-12-TT
O-T-12-TQ
O-T-12-F
O-12-60
O-12-Q
O-12-T
O-12-150
O-12-H
O-12-210
O-12-TT
O-12-TQ
O-12-F
SPECIAL PATTERNS (GREY)
Female
Pattern
60° Arc
90° Arc
120° Arc
150° Arc
180° Arc
210° Arc
240° Arc
270° Arc
360° Arc
60° Arc
90° Arc
120° Arc
150° Arc
180° Arc
210° Arc
240° Arc
270° Arc
360° Arc
O-4X9-RCS
O-4X9-LCS
O-4X18-SST
O-4X15-RCS
O-4X15-LCS
O-4X30-SST
Right Corner
Left Corner
Side Strip
Right Corner
Left Corner
Side Strip
PRESSURE-COMPENSATING
PRECISION ™ SERIES SPRAY NOZZLE MODEL LIST
5’ NOZZLE (RED) 8’ NOZZLE (GREEN)
Male
O-T-5-60P
O-T-5-QP
O-T-5-TP
O-T-5-150P
O-T-5-HP
O-T-5-210P
O-T-5-TTP
O-T-5-TQP
O-T-5-FP
10’ NOZZLE (BLUE)
O-T-10-60P
O-T-10-QP
O-T-10-TP
O-T-10-150P
O-T-10-HP
O-T-10-210P
O-T-10-TTP
O-T-10-TQP
O-T-10-FP
15’ NOZZLE (BLACK)
O-10-60P
O-10-QP
O-10-TP
O-10-150P
O-10-HP
O-10-210P
O-10-TTP
O-10-TQP
O-10-FP
O-T-15-60P
O-T-15-QP
O-T-15-TP
O-T-15-150P
O-T-15-HP
O-T-15-210P
O-T-15-TTP
O-T-15-TQP
O-T-15-FP
Female Pattern Male
O-5-60P
O-5-QP
60° Arc
90° Arc
O-T-8-60P
O-T-8-QP
O-5-TP
O-5-150P
O-5-HP
O-5-210P
O-5-TTP
O-5-TQP
O-5-FP
120° Arc
150° Arc
18° Arc
210° Arc
240° Arc
270° Arc
360° Arc
O-T-8-TP
O-T-8-150P
O-T-8-HP
O-T-8-210P
O-T-8-TTP
O-T-8-TQP
O-T-8-FP
O-15-60P
O-15-QP
O-15-TP
O-15-150P
O-15-HP
O-15-210P
O-15-TTP
O-15-TQP
O-15-FP
60° Arc
90° Arc
120° Arc
150° Arc
18° Arc
210° Arc
240° Arc
270° Arc
360° Arc
60° Arc
90° Arc
120° Arc
150° Arc
18° Arc
210° Arc
240° Arc
270° Arc
360° Arc
Female
O-8-60P
O-8-QP
O-8-TP
O-8-150P
O-8-HP
O-8-210P
O-8-TTP
O-8-TQP
O-8-FP
12’ NOZZLE (BROWN)
O-T-12-60P
O-T-12-QP
O-T-12-TP
O-T-12-150P
O-T-12-HP
O-T-12-210P
O-T-12-TTP
O-T-12-TQP
O-T-12-FP
SPECIAL PATTERNS (GREY)
Male
O-T-4X9-RCSP
O-T-4X9-LCSP
O-T-4X18-SSTP
O-T-4X15-RCSP
O-T-4X15-LCSP
O-T-4X30-SSTP
O-12-60P
O-12-QP
O-12-TP
O-12-150P
O-12-HP
O-12-210P
O-12-TTP
O-12-TQP
O-12-FP
Female
O-4X9-RCSP
O-4X9-LCSP
O-4X18-SSTP
O-4X15-RCSP
O-4X15-LCSP
O-4X30-SSTP
Pattern
60° Arc
90° Arc
120° Arc
150° Arc
18° Arc
210° Arc
240° Arc
270° Arc
360° Arc
60° Arc
90° Arc
120° Arc
150° Arc
18° Arc
210° Arc
240° Arc
270° Arc
360° Arc
Right Corner
Left Corner
Side Strip
Right Corner
Left Corner
Side Strip
Specifying Information-Precision ™ Series Spray Nozzle
OX-XXXX-XXXX-P
Radius Arc Nozzle Thread PCD
O X XXXX XXXX P
O—1” Per Hour T—Toro Male-Threaded Nozzle
Blank—Female-Threaded Nozzle
5—5’ 8—8’ 10—10’
12— 12’ 15—15’
4X15—4’X15’ (PCD models only)
4X30—4’X30’ (PCD models only)
4X9—4’X9’
4X18—4’X18’
60—60°* Q—90° T—120°
150—150°* H—180° 210—210°*
TT—240° TQ—270°
F-360º—Full-circle LCS—Left Corner
RCS—Right Corner SST—Side Strip
P—Pressure Compensating
Example: A female-threaded Precision ™ Series Spray with a spray radius of 12’ and a 90° arc would be specified as: O-12-Q
Example 2: A male-threaded Pressure-Compensating Precision ™ Series Spray with a spray radius of 10’ and a 180° arc would be spcified as O-T-10-HP
*Not available with Pressure Compensating.
83
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 83 3/6/19 1:22 PM
PRECISION ™ SERIES SPRAY NOZZLE PERFORMANCE CHARTS
PERFORMANCE DATA PRESSURE COMPENSATING – PRECISION ™ SERIES SPRAY NOZZLES
Arc
60º
90º
120º
150º
180º
210º
240º
270º
360º model #
(O-XX-XX) psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
5-60P
5-QP
5-TP
5-150P
5-HP
5-210P
5-TTP
5-TQP
5-FP
40 0.10
4.4
50 0.13
4.9
60 0.16
5.4
70 0.19
6.0
40 0.16
5.0
50 0.18
5.5
60 0.20
6.0
70 0.21
6.0
40 0.14
4.3
50 0.20
4.9
60 0.25
5.4
70 0.31
6.0
40 0.15
4.3
50 0.21
4.9
60 0.26
5.6
70 0.32
6.2
40 0.17
4.0
50 0.24
4.8
60 0.31
5.5
70 0.38
6.3
40 0.07
6.0
50 0.07
5.5
60 0.07
6.0
70 0.08
6.5
40 0.06
4.6
50 0.08
5.1
60 0.09
5.6
70 0.11
6.2
40 0.07
4.4
50 0.11
4.9
60 0.15
5.5
70 0.19
6.0
40 0.14
6.0
50 0.14
6.0
60 0.14
6.0
70 0.14
6.0
1.0
1.2
1.4
1.5
1.1
1.3
1.4
1.6
1.0
1.1
1.2
1.3
1.1
1.0
0.9
1.0
1.0
1.1
1.3
1.4
0.9
0.9
0.9
0.9
1.0
1.3
1.7
2.0
1.0
1.2
1.3
1.5
1.2
1.3
1.0
1.0
1.2
1.4
1.6
1.7
1.3
1.5
1.7
1.8
1.2
1.3
1.4
1.5
1.2
1.1
1.1
1.1
1.2
1.3
1.5
1.6
1.0
1.0
1.0
1.0
1.1
1.5
2.0
2.4
1.2
1.4
1.5
1.7
1.4
1.5
1.2
1.2
model #
(O-XX-XX) psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
8-60P
8-QP
8-TP
8-150P
8-HP
8-210P
8-TTP
8-TQP
8-FP
40 0.26
7.0
50 0.33
7.6
60 0.39
8.1
70 0.46
8.7
40 0.34
8.0
50 0.38
8.0
60 0.42
8.0
70 0.45
8.0
40 0.34
7.0
50 0.43
7.8
60 0.52
8.5
70 0.61
9.3
40 0.41
7.2
50 0.48
7.9
60 0.55
8.6
70 0.62
9.3
40 0.55
7.0
50 0.65
7.5
60 0.74
8.0
70 0.84
8.5
40 0.11
50 0.11
7.5
7.5
60 0.12
7.5
70 0.14
8.0
40 0.14
7.0
50 0.17
7.7
60 0.20
8.4
70 0.23
9.1
40 0.20
7.6
50 0.24
8.0
60 0.27
8.5
70 0.31
8.9
40 0.32
8.0
50 0.32
8.5
60 0.32
8.0
70 0.32
8.0
1.0
1.1
1.2
1.3
1.0
1.1
1.2
1.3
1.1
1.1
1.1
1.1
0.9
1.0
1.1
1.2
1.0
1.1
1.2
1.3
1.1
1.0
1.1
1.1
1.0
1.1
1.2
1.3
1.1
1.2
1.2
1.3
1.1
1.2
1.3
1.2
1.1
1.2
1.4
1.5
1.1
1.2
1.4
1.5
1.2
1.2
1.3
1.3
1.0
1.1
1.3
1.3
1.2
1.3
1.4
1.5
1.3
1.2
1.3
1.3
1.2
1.3
1.4
1.5
1.3
1.3
1.4
1.4
1.3
1.3
1.4
1.4
model #
(O-XX-XX) psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
10-60P
10-QP
10-TP
10-150P
10-HP
10-210P
10-TTP
10-TQP
10-FP
40 0.48
9.7
50 0.53
10.1
60 0.57
10.4
70 0.62
10.8
40 0.57
9.5
50 0.64
10.0
60 0.70
10.0
70 0.75
10.0
40 0.63
9.6
50 0.70
9.9
60 0.77
10.3
70 0.84
10.6
40 0.71
9.5
50 0.77
9.9
60 0.82
10.3
70 0.88
10.7
40 0.95
9.6
50 1.06
10.0
60 1.16
10.5
70 1.27
10.9
40 0.16
9.5
50 0.18
10.5
60 0.20
11.0
70 0.22
11.0
40 0.26
9.5
50 0.28
10.0
60 0.29
10.5
70 0.31
11.1
40 0.31
9.5
50 0.36
10.0
60 0.41
10.5
70 0.46
11.0
40 0.47
9.5
50 0.49
10.0
60 0.51
10.0
70 0.53
10.5
1.0
1.0
1.1
1.1
1.0
1.1
1.1
1.2
1.0
1.1
1.1
1.2
1.1
1.1
1.2
1.2
1.0
1.1
1.1
1.2
1.2
1.1
1.2
1.1
1.0
1.1
1.2
1.3
1.0
1.1
1.1
1.2
1.0
1.0
1.0
1.1
1.1
1.2
1.2
1.3
1.1
1.2
1.3
1.4
1.1
1.2
1.3
1.4
1.2
1.2
1.3
1.4
1.1
1.2
1.3
1.4
1.4
1.3
1.4
1.3
1.1
1.2
1.4
1.5
1.1
1.2
1.3
1.4
1.2
1.1
1.1
1.2
84
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 84 3/6/19 1:22 PM
Five Radii Available in Toro
(Male) & Female Threads
Nine Arcs, Plus Side and Center Strips Available
5’
8’
10’
12’
15’
60° 90° 120° 150° 180° 210° 240° 270° 360°
4’ X 15’
4’ X 9’
LCS
(Left Corner Strip)
4’ X 30’
4’ X 18’
SST
(Side Strip)
4’ X 15’
4’ X 9’
RCS
(Right Corner Strip)
PERFORMANCE DATA PRESSURE COMPENSATING – PRECISION ™ SERIES SPRAY NOZZLES
Arc
60º
90º
120º
150º
180º
210º
240º
270º
360º model #
(O-XX-XX) psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
12-60P
12-QP
12-TP
12-150P
12-HP
12-210P
12-TTP
12-TQP
12-FP
40 0.70
11.5
50 0.75
11.8
60 0.80
12.2
70 0.85
12.5
40 0.86
11.0
50 0.96
11.5
60 1.05
12.0
70 1.13
12.0
40 0.90
11.4
50 1.03
11.5
60 1.16
11.5
70 1.29
11.6
40 1.05
11.4
50 1.14
11.7
60 1.23
12.0
70 1.32
12.3
40 1.35
11.5
50 1.49
11.8
60 1.63
12.2
70 1.77
12.5
40 0.30
13.0
50 0.30
13.0
60 0.30
13.0
70 0.30
13.0
40 0.34
12.0
50 0.39
12.2
60 0.43
12.5
70 0.48
12.7
40 0.46
11.5
50 0.50
11.8
60 0.54
12.0
70 0.58
12.3
40 0.59
12.0
50 0.66
11.5
60 0.72
12.0
70 0.78
12.0
1.0
1.0
1.1
1.1
1.0
1.1
1.2
1.2
1.0
1.0
1.1
1.1
1.2
1.2
1.2
1.3
1.0
1.0
1.1
1.1
1.0
1.2
1.2
1.3
1.0
1.0
1.1
1.1
1.0
1.1
1.2
1.2
1.0
1.0
1.0
1.0
1.2
1.2
1.3
1.3
1.2
1.3
1.3
1.4
1.1
1.2
1.3
1.3
1.4
1.4
1.4
1.5
1.2
1.2
1.2
1.2
1.1
1.3
1.3
1.5
1.2
1.2
1.3
1.3
1.2
1.3
1.3
1.4
1.2
1.2
1.2
1.2
model #
(O-XX-XX) psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
15-60P
15-QP
15-TP
15-150P
15-HP
15-210P
15-TTP
15-TQP
15-FP
40 1.10
14.5
50 1.20
14.3
60 1.29
14.0
70 1.39
13.8
40 1.23
14.0
50 1.44
14.0
60 1.56
14.0
70 1.70
15.0
40 1.45
14.5
50 1.57
14.8
60 1.68
15.0
70 1.80
15.3
40 1.60
14.0
50 1.70
14.4
60 1.80
14.8
70 1.90
15.1
40 2.20
14.5
50 2.36
14.8
60 2.52
15.1
70 2.68
15.4
40 0.36
14.0
50 0.41
15.0
60 0.45
15.0
70 0.48
15.0
40 0.53
14.2
50 0.59
14.5
60 0.64
14.8
70 0.70
15.1
40 0.72
14.3
50 0.77
14.8
60 0.82
15.2
70 0.87
15.7
40 0.93
14.0
50 1.04
14.5
60 1.14
14.5
70 1.23
14.5
0.9
1.0
1.0
1.1
1.0
1.0
1.1
1.1
1.0
1.0
1.1
1.1
1.0
1.2
1.3
1.2
1.0
1.1
1.1
1.2
1.1
1.2
1.3
1.4
1.0
1.0
1.1
1.1
1.0
1.1
1.1
1.2
1.1
1.0
1.1
1.2
1.0
1.1
1.2
1.2
1.2
1.2
1.2
1.3
1.2
1.2
1.2
1.3
1.2
1.4
1.5
1.4
1.2
1.2
1.3
1.3
1.3
1.3
1.5
1.6
1.2
1.2
1.2
1.2
1.2
1.2
1.3
1.3
1.2
1.2
1.3
1.4
Arc
4X30
SSTP
4X15
LCSP
4X15
RCSP
4X18
SSTP
4X9
LCSP
4X9
RCSP psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
40 0.62
4x30
50 0.65
4x30
60 0.67
4x30
70 0.70
4x30
40 0.32
4x15
50 0.33
4x15
60 0.34
4x15
70 0.35
4x15
40 0.32
4x15
50 0.33
4x15
60 0.34
4x15
70 0.35
4x15
40 0.36
4x18
50 0.37
4x18
60 0.38
4x18
70 0.39
4x18
40 0.18
4x9
50 0.19
60 0.20
70 0.21
4x9
4x9
4x9
40 0.18
50 0.19
60 0.20
70 0.21
4x9
4x9
4x9
4x9
1.1
1.1
1.2
1.0
1.0
1.0
1.0
1.0
1.1
1.1
1.2
1.1
1.2
1.0
1.1
1.2
1.0
1.1
1.0
1.0
1.1
1.1
1.0
1.1
1.2
1.2
1.3
1.2
1.2
1.2
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.1
1.3
1.3
1.2
1.2
1.1
1.2
1.3
1.3
1.2
1.2
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 85
85
3/6/19 1:23 PM
PRECISION ™ SERIES SPRAY NOZZLE PERFORMANCE CHARTS
PERFORMANCE DATA – PRECISION ™ SERIES SPRAY NOZZLES
Arc
60º
90º
120º
150º
180º
210º
240º
270º
360º model #
(O-XX-XX) psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
5-60
5-Q
5-T
5-150
5-H
5-210
5-TT
5-TQ
5-F
20 0.10
4.4
30 0.13
5.0
40 0.14
5.1
50 0.14
5.2
20 0.10
4.4
30 0.15
5.2
40 0.16
5.3
50 0.17
5.5
20 0.14
4.3
30 0.17
5.0
40 0.19
5.0
50 0.19
5.0
20 0.15
4.3
30 0.20
5.0
40 0.21
5.0
50 0.22
5.0
20 0.17
4.0
30 0.26
5.0
40 0.26
5.0
50 0.26
5.0
20 0.04
4.7
30 0.04
5.0
40 0.04
5.0
50 0.05
5.3
20 0.06
4.6
30 0.06
5.0
40 0.07
5.0
50 0.07
5.0
20 0.07
4.4
30 0.09
5.0
40 0.09
5.2
50 0.10
5.4
20 0.07
4.0
30 0.11
5.0
40 0.12
5.2
50 0.13
5.4
1.0
1.0
1.1
1.1
1.1
1.0
1.1
1.1
1.0
1.0
1.0
1.0
1.0
1.1
1.1
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.2
1.2
1.3
1.3
1.1
1.2
1.3
1.2
1.2
1.2
1.2
1.2
1.2
1.3
1.3
1.2
1.2
1.2
1.1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.1
1.2
1.1
1.2
1.2
1.2
1.2
1.2
1.1
model #
(O-XX-XX) psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
8-60
8-Q
8-T
8-150
8-H
8-210
8-TT
8-TQ
8-F
20 0.26
7.0
30 0.33
8.0
40 0.34
8.0
50 0.34
8.0
20 0.33
7.6
30 0.36
8.0
40 0.37
8.1
50 0.38
8.2
20 0.34
7.0
30 0.44
8.0
40 0.46
8.0
50 0.46
8.0
20 0.41
7.2
30 0.49
8.0
40 0.54
8.0
50 0.55
8.0
20 0.55
7.0
30 0.66
8.0
40 0.68
8.0
50 0.71
8.0
20 0.10
7.6
30 0.11
8.0
40 0.12
8.1
50 0.13
8.3
20 0.14
7.0
30 0.17
8.0
40 0.18
8.2
50 0.18
8.4
20 0.20
7.6
30 0.22
8.0
40 0.23
8.2
50 0.24
8.3
20 0.25
7.5
30 0.27
8.0
40 0.28
8.1
50 0.29
8.2
1.0
1.1
1.1
1.1
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.1
1.1
1.1
1.1
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.0
1.0
1.0
1.1
1.1
1.1
1.1
1.2
1.2
1.2
1.1
1.2
1.2
1.2
1.1
1.2
1.2
1.3
1.3
1.3
1.3
1.2
1.1
1.2
1.2
1.2
1.1
1.1
1.2
1.2
1.1
1.1
1.1
1.3
1.1
1.2
1.1
1.2
1.1
1.2
1.3
model #
(O-XX-XX) psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
10-60
10-Q
10-T
10-150
10-H
10-210
10-TT
10-TQ
10-F
20 0.48
9.7
30 0.51
10.0
40 0.55
10.3
50 0.56
10.4
20 0.56
9.8
30 0.58
10.0
40 0.60
10.4
50 0.62
10.5
20 0.63
9.6
30 0.69
10.0
40 0.73
10.3
50 0.74
10.4
20 0.71
9.5
30 0.79
10.0
40 0.84
10.3
50 0.86
10.4
20 0.95
9.6
30 1.03
10.0
40 1.08
10.3
50 1.12
10.4
20 0.16
9.5
30 0.17
10.0
40 0.18
10.0
50 0.19
10.0
20 0.26
9.5
30 0.23
10.0
40 0.28
1.2
50 0.28
1.3
20 0.31
9.5
30 0.34
10.0
40 0.36
10.0
50 0.37
10.0
20 0.41
9.8
30 0.43
10.0
40 0.44
10.2
50 0.46
10.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.1
1.1
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.1
1.1
1.1
1.1
1.1
1.2
1.1
1.1
1.1
1.1
1.1
1.2
1.3
1.3
1.2
1.3
1.1
1.1
1.2
1.2
1.1
1.1
1.1
1.1
1.1
1.1
1.2
1.2
1.1
1.2
1.2
1.2
1.2
1.1
1.2
1.3
86
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 86 3/6/19 1:23 PM
Five Radii Available in Toro
(Male) & Female Threads
Nine Arcs, Plus Side and Center Strips Available
5’
8’
10’
12’
15’
60° 90° 120° 150° 180° 210° 240° 270° 360°
4’ X 15’
4’ X 9’
LCS
(Left Corner Strip)
4’ X 30’
4’ X 18’
SST
(Side Strip)
4’ X 15’
4’ X 9’
RCS
(Right Corner Strip)
PERFORMANCE DATA – PRECISION ™ SERIES SPRAY NOZZLES
Arc
60º
90º
120º
150º
180º
210º
240º
270º
360º model #
(O-XX-XX) psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
12-60
12-Q
12-T
12-150
12-H
12-210
12-TT
12-TQ
12-F
20 0.70
11.5
30 0.74
12.0
40 0.79
12.3
50 0.80
12.4
20 0.76
11.6
30 0.82
12.0
40 0.84
12.3
50 0.85
12.4
20 0.90
11.4
30 0.99
12.0
40 1.04
12.3
50 1.05
12.4
20 1.05
11.4
30 1.15
12.0
40 1.19
12.2
50 1.22
12.3
20 1.35
11.5
30 1.48
12.0
40 1.59
12.4
50 1.60
12.5
20 0.24
11.5
30 0.25
12.0
40 0.26
12.1
50 0.28
12.2
20 0.34
12.0
30 0.37
12.1
40 0.39
11.4
50 0.39
12.0
20 0.46
11.5
30 0.49
12.0
40 0.51
12.2
50 0.52
12.3
20 0.60
11.6
30 0.62
12.0
40 0.63
12.2
50 0.64
12.3
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.1
1.1
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.2
1.2
1.2
1.2
1.2
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.3
1.3
1.2
1.2
1.2
1.1
1.2
1.2
1.2
1.1
1.1
1.1
1.2
1.1
1.1
1.1
1.2
1.1
1.2
1.1
1.2
1.2
1.2
1.3
model #
(O-XX-XX) psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
15-60
15-Q
15-T
15-150
15-H
15-210
15-TT
15-TQ
15-F
20 1.10
14.5
30 1.16
15.0
40 1.25
15.4
50 1.28
15.5
20 1.15
14.5
30 1.20
15.0
40 1.30
15.5
50 1.40
15.6
20 1.45
14.5
30 1.54
15.0
40 1.58
15.2
50 1.61
15.3
20 1.72
14.5
30 1.78
15.0
40 1.82
15.0
50 1.90
15.3
20 2.20
14.5
30 2.31
15.0
40 2.35
15.2
50 2.40
15.3
20 0.35
14.0
30 0.39
15.0
40 0.40
15.1
50 0.42
15.3
20 0.53
14.2
30 0.58
15.0
40 0.60
15.1
50 0.61
15.3
20 0.72
14.3
30 0.77
15.0
40 0.81
15.3
50 0.82
15.4
20 0.92
14.7
30 0.96
15.0
40 1.00
15.2
50 1.10
15.3
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.1
1.2
1.2
1.2
1.1
1.1
1.1
1.2
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.2
1.1
1.2
1.2
1.2
1.2
1.2
1.3
1.2
1.1
1.2
1.2
1.2
1.1
1.2
1.2
1.2
1.2
1.2
1.2
Arc
4X30
SST
4X15
LCS
4X15
RCS
4X18
SST
4X9
LCS
4X9
RCS psi gpm Radius
Precip.
Rate n (in./hr.)
Precip.
Rate
(in./hr.)
20 0.62
4x28
30 0.66
4x30
40 0.67
4x30
50 0.68
4x30
20 0.32
4x15
30 0.33
4x15
40 0.34
4x15
50 0.34
4x15
20 0.32
4x15
30 0.33
4x15
40 0.34
4x15
50 0.34
4x15
20 0.36
4x18
30 0.37
4x18
40 0.38
4x18
50 0.38
4x18
20 0.18
4x9
30 0.19
40 0.2
50 0.2
4x9
4x9
4x9
20 0.18
30 0.19
40 0.2
50 0.2
4x9
4x9
4x9
4x9
1.0
1.1
1.1
1.0
1.0
1.0
1.0
1.0
1.0
1.1
1.1
1.1
1.1
1.0
1.1
1.1
1.0
1.1
1.0
1.1
1.1
1.1
1.0
1.1
1.2
1.2
1.1
1.1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.3
1.3
1.1
1.2
1.3
1.2
1.2
1.1
1.2
1.2
1.3
1.2
1.2
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 87
87
3/6/19 1:23 PM
SUBSURFACE IRRIGATION
Subsurface irrigation provides water directly to the root zone to ensure maximum utilization, minimizing waste from evaporation and surface runoff. These kits provide everything you need to set up a tee box, bunker system, lake perimeter or anywhere else a low volume subsurface system applies.
FEATURES & BENEFITS
Pressure Compensating Emitters
Every emitter is equipped with a pressure compensating device to ensure the optimum operating pressure and precise flow rates are distributed from each point throughout the zone regardless of distance or elevation change.
DL2000 ™ Tubing with ROOTGUARD ®
Root Inhibitor
Each emitter is impregnated with a powerful root inhibitor that prevents roots from entering and clogging the emitter opening.
This ensures even water distribution uniformity and maximum efficiency from each point of emission.
Specifying Information—Subsurface Irrigation
Model Number Description
SSDS-LF-500
SSDS-HF-1000
RGP-212-05
DL2000 500' Drip System (Bunker)—Low Flow
DL2000 1000' Drip System (Bunker)—High Flow
DL2000 500’ (Roll, 0.5 GPH), 12” Spacing
Example: A 500' DL2000 Drip System, would be specified as: SSDS-LF-500
Filtration and Pressure Regulation Provided
Each kit includes a Y filter with 150 mesh/100 micron element to prevent debris contamination and a 25 psi fixed regulator to eliminate damage from high pressure spikes.
Flush Valve
Provides a momentary high velocity in the tubing to move debris out of the piping system to eliminate emitter clogging every time the zone is activated.
Model
GZK-25-LF-DCL
GZK-25-LF-SG
GZK-25-MF-DCL
GZK-25-MF-SG
GZK-40-MF-DCL
GZK-40-MF-SG
Specifying Information—Golf Zone Kits
Description
P220G valve with DC latching solenoid, 25 psi reg, low flow .1-8 gpm, 150 mesh SS filter
P220G valve with SPIKE GUARD ™ solenoid, 25 psi reg, low flow .1-8 gpm, 150 mesh SS filter
P220G valve with DC latching solenoid, 25 psi reg, medium flow 2-20 gpm, 150 mesh SS filter
P220G valve with SPIKE GUARD solenoid, 25 psi reg, medium flow 2-20 gpm, 150 mesh SS filter
P220G valve with DC latching solenoid, 40 psi reg, medium flow 2-20 gpm, 150 mesh SS filter
P220G valve with SPIKE GUARD solenoid, 40 psi reg, medium flow 2-20 gpm, 150 mesh SS filter
88
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 88 3/6/19 1:23 PM
FTT16-10 FEE16-10 FCC16-10 FAM16-10
FTF16-10 FJA16-10
Specifying Information— 5 / 8 ” Loc-Eze ™ Fittings
Model
FTT16-10 Loc-Eze Tee (Bag of 10)
Description
FEE16-10
FCC16-10
FAM16-10
FTF16-10
FJA16-10
Loc-Eze Elbow (Bag of 10)
Loc-Eze Coupling (Bag of 10)
Loc-Eze x 1 /
2
” MPT Male Adapter (Bag of 10)
Loc-Eze x 1 /
2
” FPT Tee (Bag of 10)
Loc-Eze x 3 /
4
” MHT without Cap (Bag of 10)
Note: 5 /
8
” EHW1645 is an equivalent hose size to DL2000 Dripline.
YD-500-34Z-10 FCH-H-FHT-10 FJQ16-10 SS6-50G
Model
Specifying Information Accessories
Description
YD-500-34Z-10 Air Vent — 1 /
2
” MIPT Air Release & Vacuum Relief Valve (Bag of 10)
FCH-H-FHT-10
FJQ16-10
Flush Valve — 3 / 4 ” FHT (Hose Thread), 0.8 gpm,
2 psi Sealing Pressure (Bag of 10)
5 / 8 ” Figure-eight End Clamp (Bag of 10)
SS6-50G 3 /
4
” Steel Soil Staple to Hold Tubing in Place (Bag of 50)
SPECIFICATIONS
Drip System Specifications-Bunkers Only
• Flow range:
- Low flow: 0.1 to 8.0 gpm
- High flow: 2.0 to 20.0 gpm
• DL2000 ™ range:
- Low flow: 12’ to 1000’
- High flow: 250’ to 2500’
• Pressure compensating emitter: 0.5 gph
• Emitter spacing – 12"
• DL2000 ™ maximum run length: 360’
• Application rate (12” x 12” spacing): 0.85” per hour
Benefits On Bunkers
• Uniformly applies water to areas such as fingers
• Minimizes runoff
• Eliminates overspray into bunker keeping sand dry
• Cycle/soak allows for application on steep slopes
• Reduces bunker cave-ins
• Saves time, labor and money by eliminating the need for hand-watering
Benefits On Tees
• Applies water directly to the root zone allowing turf to stay dry
• Water is applied precisely to the tee box without watering the surrounding area
Bunker System Components
• DL2000 ™ subsurface dripline
• Drip Zone Valve Kit – includes control valve, pressure regulator, Y-filter and manual ball valve
• Air Vent Assembly – pre-assembled and ready to install (bunker only)
• Required inlet/outlet fittings
• Flush Assembly Fittings (8 gpm) 2 psi sealing flush valve (bunker only)
• Installation Fittings:
- Includes Loc-Eze tees, couplings, elbows and end clamps
- 10’ of Blue Stripe ® polyethylene tubing
- Soil staples for secure tubing placement
• Pipe thread tap
Warranty
• Two years
REG075251-8 REG100252-20 REG100402-20
Model
REG075251-8
Specifying Information Accessories
Description
Pressure regulator, 3 /
4
” 25 psi, .1-8 gpm
REG100252-20 Pressure regulator, 1” 25 psi, 2-20 gpm
REG100402-20 Pressure regulator, 1” 40 psi, 2-20 gpm
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 89
ALFS75150-SG ALFS10150-SG AMP0004-1SG
Model
Specifying Information Accessories
Description
ALFS75150-SG Filter, 3 /
4
”, 150 mesh stainless screen
ALFS10150-SG Filter, 1”, 150 mesh stainless screen
AMP0004-1SG Filter Replacement, 150 mesh stainless screen
89
3/6/19 1:23 PM
SWING JOINTS
Toro offers a full line of swing joints that cover all Golf sprinkler thread types. Swing joints provide the flexibility to align the sprinkler to proper grade and level positioning to ensure optimum water use through maximum nozzle distribution uniformity.
FEATURES & BENEFITS
Minimize Friction Loss
1”, 1¼” and 1½” models are available to cover flows exceeding 80 gpm, and minimize friction loss to ensure optimum pressure is available at each sprinkler.
Standard 2X90 And Ultra 4X90 Outlet
Configurations
The standard 2x90 models provide two 90’s at the outlet for alignment in two directions and the Ultra 4x90 models provide four 90’s at the outlet for maximum alignment flexibility in four directions.
Saddle And Glue Tee Models
Glue tees for PVC piping applications and saddle tees for HDPE and PVC piping applications. Both tee styles are available with 1”,
1¼” and 1½” double o-ring sealing outlets.
Quick Coupler Models
All swing joint styles are available with a quick coupler outlet that includes both an anti-rotation and position stabilizing feature to ensure the quick coupling valve stays secure during key installation and removal.
90
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 90 3/6/19 1:23 PM
Durability And Reliability
Constructed from schedule
80 PVC for durability and provides double o-ring seals on all swing fittings to ensure a lifetime of reliability and leak free performance.
1¼” Female ACME x 1” Male ACME Adapter
Allows you to upgrade existing Rain Bird ®
Eagle ™ * 700 1¼” sprinklers to any Toro
800S or DT Series Sprinkler. P/N TA36-132
*Rain Bird is a registered trademark of Rain Bird Corporation. Eagle is a trademark of Rain Bird Corporation.
Warranty
• Five years
• Toro Golf sprinkler warranty extended to 5 years when purchased and installed with a Toro Swing Joint
Additional Features
Schedule 80 PVC construction
Double o-ring swivel joints
Low friction loss characteristics
315 psi pressure rating
800 psi burst pressure safety rating
Standard models with 2x90 outlet configuration
Ultra models with 4x90 outlet for maximum alignment flexibility
3 inlet fittings styles: ACME, male thread and 4” spigot
2 outlet fitting styles: ACME and male thread
8", 12” and 18” lay lengths
Saddle Tee models: 2” tee with 1”, 1¼” or 1½” outlet
Glue Tee models: 2” tee with 1”, 1¼” or 1½” outlet
Glue 90°models: 2” 90° with 1”, 1¼” or 1½” outlet
Quick coupler models with Dura-lock anti-rotation feature
Compatible with all brands of service and saddle tees
1", 1 ¼ " and 1 ½ " Standard 2x90 and Ultra 4x90
Toro Tool Tip:
Use a 1¼” hole saw for the 1” Saddle Tee.
Use a 1½” hole saw for the 1¼” and 1½”
Saddles.
Quick Coupler Glue tees, Saddle tees
Specifying Information—Toro Swing Joints
TSJXXXX-XX-XX-X-XXX*
Description
TSJ
Inlet Size
XX
Inlet Type
XX
Size
XX
Length
XX
Number of Elbows
X
Outlet Size
XX
Outlet Type
X
TSJ— Toro
Swing
Joint
10—1”
12—1
15—1
1
1
/
4
”
/ 2 ”
M—MIPT (male pipe
thread)
S—4” Spigot
A—ACME Thread
GE—Glue Elbow
GT—Glue Tee
ST—Saddle Tee
AF—Aqua Fuse
Blank—same as
inlet size
10—1”
12—1
15—1
1
1
/
4
”
/
2
”
8—8” Lay Length
12—12” Lay Length
18—18” Lay Length
3—Standard Unibody
for Side Pipe Mount
4—Standard Unibody
for Top Pipe Mount
5—Ultra Unibody
for Side Pipe Mount Q*
6—Ultra Unibody
for Top Pipe Mount
10—1”
15—1 1 /
2
”
M—MIPT (Male pipe
thread)
A—ACME thread
QC—Quick Coupler
Example: A Toro 1½” Swing Joint with an ACME inlet, 12” lay length, 3 elbows (standard uni-body) and 1½” ACME outlet fitting would be specified as: TSJ-15A-12-3-15A
* Use QC to designate QC when the inlet size and size are the same (TSJ-10A-12-3-10QC) use Q when the inlet size and size are different (TSJ-15A10-12-3-10Q)
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 91
91
3/6/19 1:23 PM
GOLF SPRINKLER TOOLS
995-15
Selector Tool
• All electric golf sprinklers
• Allows user to manually turn the sprinkler “ON”, turn or leave it “OFF” or place it into the
“AUTO” position awaiting a command from the controller
995-83 Multi
Purpose Tool
• All Golf sprinklers
• Riser pull up for
INFINITY ® , FLEX800,
DT and 800S Series
• Riser screen removal on all models
• Upper snap ring remover on all models
995-82 Arc
Adjustment Tool,
3/32” Allen
Wrench
• 765,785,865S,885S
Arc adjustment of the part circle drives
• INFINITY ® , FLEX800,
DT and 800S Series.
Adjustment of the radius reduction screw
Riser Removal
Tools
• 995-85 drive assembly extraction
tool 730, 760, 780,
860S,880S
- Threads onto the drive output shaft
and allows removal of the drive from
the body
Valve Removal
Tools
• 995-08 All 1” golf models and 640
• 995-09 All 1.5” models and 690
Nut Drivers
• 995-105 5/16”
INFINITY ® , FLEX800,
DT and 800S Series
TruJectory adjustment on INFX5-6/ FLX5-6 models
- Inner, intermediate and back nozzle removal on all DT and 800S models
• 995-99 5/8”
- Dual trajectory selection
- Main nozzle removal on all models
• 995-79 7/16”
834S/854S pre
August 2007
- Inner, intermediate and back nozzle removal
- 650/760/780/860S/
880S Inner, intermediate and back nozzle removal
• 995-81 9/16”
760/780 Series Main
nozzle removal
• 995-80 1/2”
760/780/860S/880S
Nozzle base jam nut removal
• 995-52 1/4” 660/680
Drive plate nut removal
• 995-53 3/8” 660/680
Cap nut removal
Valve Insertion
Tools
Aligns and Installs
Valve into the Body
• 995-35 640 VIH body
• 995-76 All 1” golf models (Except
INFINITY ® )
• 995-101 All 1.5” golf models (Except
INFINITY ® )
• 995-12 690 body
• 118-1843 INFINITY ®
1.5” models
• 118-1844 INFINITY ®
1" models
92
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 92
995-100 Valve
Snap Ring Pliers with Screen
Remover
• All Golf sprinklers lower snap ring removal on all models
• Rock screen removal on all INFINITY ® ,
FLEX800, DT and
800S Series
• Valve removal on all models
Riser Hold Up
Tools
Allow for Nozzle
Servicing
• 118-0954 Riser hold up tool, red
• 995-55 All 700 models
• 995-102 Universal hold up tool, all 700,
800S, DT, INFINITY ® and FLEX800 models
PRNTOOL
• Adjustment tool for
Precision ™ Series
Rotating Nozzles
• Adjusts arc and radius
PNOZZTOOL
Riser Pull Up Tool
• Used on 590GF sprays
102-6527
• T7 Rotor adjustment tool
118-0954
• Riser hold up tool
3/6/19 1:23 PM
VALVES AND VALVE BOXES COMPARISON CHARTS
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 93
Model
Catalog Pages
Flow Range
Valve Comparison Chart
220G Brass
Series
94-95
5.0-180 gpm
P220G
Series
96-97
5.0-180 gpm
P220GS Series
Scrubber
96-97
5.0-150 gpm
Operating Pressure
Conditions
Sizes
Configurations
Electrically Activated
Systems
Pressure Regulated
Systems
Effluent Water
1”
1 1 / 4 ”
1 1 / 2 ”
2”
Inline/Globe
Angle/Globe
Inlet/Outlet Threaded (Female)
Features
Body Construction
Manual Flow Control
Pressure Regulation
Internal Manual
Bleed
External Manual
Bleed (Flush)
Glass-filled Nylon
Brass
Warranty
10-220 psi max
X
X
X
5 Years
X
X
X
X
X
X
X
X
X
X
X
10-220 psi max 10-220 psi max
X
X
X
X
X
X
X
X
X
X
X
X
X
X
5 Years
X
X
X
X
5 Years
X
X
X
X
X
X
X
X
X
X
3/6/19 1:23 PM
220G BRASS SERIES VALVES
Heavy-duty brass construction for superior performance under the harshest conditions. Toro 220G Brass Series valves are rugged and reliable, and offer dependable performance within the toughest of situations and settings.
FEATURES & BENEFITS
Leading Lighting Protection
A lightning rating that exceeds 20,000 volts – nearly three times the protection of competing products.
Dirty Water Ready
A stainless steel 120-mesh filter enables dependable valve operation in dirty and reclaimed water applications with a greatly reduced likelihood of clogging or failure to close.
Spike Guard ™ Solenoid
Reduces wire size requirements and allows 2X as many valves to run simultaneously on a transformer, all while lowering power consumption and related costs.
EZReg ® Pressure Regulator compatible
Available in two fully-adjustable models, Toro EZReg
Pressure Regulators allow the consistent regulation of pressure within a zone, ensuring optimal operation of all downstream sprinklers. EZReg Pressure Regulators thread directly to the valve bonnet – no special adaptor required and no need to remove the solenoid. The desired pressure can be set fast and with a high level of accuracy thanks to an easy-to-read turn dial design.
220G-27-04
220G-27-06
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 94 3/6/19 1:23 PM
Dirty Water Resistance
The 120 mesh stainless steel filter screen is positioned on the supply side of the water stream. It is constantly flushed by the flow, enabling the use of very dirty water without clogging. Stainless steel construction of both the filter screen and the valve solenoid seat ensures long component life in all types of water and pressures.
SPECIFICATIONS
Operational
• Flow Range:
– 1” model: 1 to 40 gpm
– 1 1 /
4
” model: 20 to 100 gpm
– 1½” model: 20 to 120 gpm
– 2” model: 30 to 170 gpm
• Operating Pressure: 10 to 220 psi
• Pressure Regulating:
– Outlet (EZR-100): 5 to 100 psi ± 3
• Minimum Pressure Differential (between inlet and outlet) for
Pressure Regulation:
– 1 /
4
”, and 1 1 /
2
” models: 10 psi
– 2” models: 20 psi
• Burst Pressure Safety Rating: 750 psi
• Body Styles:
– Globe orientation – 1”, 1 1 /
4
”, 1 1 /
2
”, and 2” models, female threads
Dimensions
• 1” model: 5 1 /
4
” H x 5” W
• 1 1 /
4
” model: 6 1 /
2
” H x 6” W
• 1½” model: 6 1 /
2
” H x 6” W
• 2” model: 7 1 /
2
” H x 7” W
Warranty
• Five years
220G BRASS SERIES MODEL LIST
Model
PRESSURE REGULATED WITH EZREG ®
220G-27-04 1" Inlet/Outlet; Globe
220G-27-05 1 1 /
4
” Inlet/Outlet; Globe
220G-27-06 1 1 /
2
” Inlet/Outlet; Globe
220G-27-08 2" Inlet/Outlet; Globe
Description
Additional Features
EZReg ® Pressure Regulator can be installed as a service kit without having to drain the main line
Pressure regulates in electric or manual modes, and is serviceable under pressure
Built-in Schrader-type valve is standard on all models for fast downstream pressure verification
Manual Flow Control; adjustable to full shut-off
Robust, double-beaded, fabric-reinforced rubber diaphragm
Commercial-grade 316 Stainless Steel stem for maximum corrosion resistance
220G BRASS SERIES PRESSURE LOSS DATA
Model Type
1" Electric
1 1 /
4
” Electric
1 1 /
2
” Electric
2" Electric
5
1.8
10
2.0
15
2.2
20
3.1
1.9
2.2
30
5.1
2.5
2.5
3.1
40
7.8
2.7
2.8
3.2
50
3.5
3.1
2.9
60
4.1
3.8
3.0
Gallons Per Minute
70
5.6
5.0
3.3
80
6.6
3.4
100
4.5
120
6.6
150 170 180
10.1
13.5
14.9
200 250 300 350
Notes: For optimal performance when designing a system, it is recommended that total Pressure Loss be calculated to ensure sufficient downstream pressure.
For optimum pressure regulation performance, size regulating valves towards the higher flow ranges.
Flow rates are recommeded not to exceed 5 psi loss.
Specifying Information—220G Brass Series
220G-27-0 XXX
Type Body Style Size Optional
220G
220G—220G Brass Series Valve
27
27—NPT, Pressure-regulated (5–100 psi) 4—1"
5—1 1 ⁄
4
"
6—1 1
8—2"
⁄ 2 "
O X
DL—Latching Solenoid for 2-wire LSM Systems
E—Effluent
XX
Example: A 1" NPT pressure-regulated, 220G Brass Series Valve with 60 Hz solenoid, would be specified as: 220G-27-04
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 95 3/6/19 1:23 PM
P220G AND P220GS SERIES VALVES
The P220G and P220GS Series provide a full family of plastic valves that can deliver the water to meet the challenging needs of today’s courses. With precise pressure regulation these valves deliver the optimum pressure and flow requirements to every sprinkler on the zone ensuring maximum uniformity of the water to the turf.
FEATURES & BENEFITS
EZReg ® Pressure Regulating System
Can be adjusted from 5-100 psi to deliver the optimum pressure for every need.
Spike Guard ™ Solenoid
With its 20,000 volt lightning rating, it virtually eliminates the need for solenoid replacements in high lightning environments.
Internal Manual Bleed
Ensures the optimum pressure of the system even when being operated manually.
Double-beaded Fabric Reinforced Diaphragm
Provides superior performance and extended life without tearing in high-pressure golf applications.
Self Cleaning Metering Pin
A self-cleaning feature that operates two times during every valve cycle ensuring smooth positive opening and closing.
P220G-27-06
1½”
P220G-27-04
1”
P220G-27-08
2”
Additional Features
Glass-filled nylon and stainless steel construction
Internal and External bleed
No external tubing
Standard, built-in Schrader-type valve for downstream pressure verification
Flow control independent of solenoid
Self-aligning bonnet to ensure correct installation
Self-cleaning, stainless steel metering rod
Low-flow capability down to 5 gpm
Low-power requirement for longer wire runs
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 96 3/6/19 1:23 PM
VALVE WIRE SIZING CHART
Maximum One-way Distance (in ft.) Between Controller and Valve Using Spike-Guard ™ Solenoid*
Ground Wire
10
8
6
18
16
14
12
18 16 14
Control Wire
12 10 8 6
2040 2520 2940 3280 3540 3720 3860
2520
2940
3280
3540
3720
3860
3260
4000
4660
5220
5260
5960
* Solenoid Model: 24 V ac
Pressure: 150 psi
Voltage Drop: 4 V
Minimum Operating Voltage: 20 V
Amperage (peak) 0.12 A
4000
5180
6360
7420
8300
8960
4660
6360
8240
5220
7420
5620
8300
5920
8960
10100 11800 13180
10100 13180 16060 18770
11800 16060 20800 25540
13180 18700 25540 33080
“Scrubber” Turbine
Filter Surface
ACT ™ System
Toro’s patented technology employs a constantly rotating turbine to clean the metering/filtration area. This ensures that dirt, algae and particulates do not impede valve performance.
SPECIFICATIONS
Operational
• Flow Range:
– 1” – 5 to 40 gpm
– 1½” – 30 to 110 gpm
– 2” – 80 to 180 gpm
• Operating Pressure (220 psi maximum pressure rating):
– 1” – 1½” – 10 to 220 psi
– 2” – 20 to 220 psi
• EZReg ® Pressure regulating:
– Outlet: 5 to 100 psi ± 3 psi
• Inlet: 10 to 220 psi
• Minimum pressure differential (between inlet and outlet)
for pressure regulation: 10 psi
• Burst pressure safety rating: 750 psi
• Body styles:
– Globe/Angle – 1”, 1½”, 2” female threads
• Spike Guard ™ Solenoid: 24 VAC (50/60 Hz) Standard
– Inrush: 60 Hz: 0.12 amps
– Holding: 60 Hz: 0.1 amps
• DC latching – momentary low voltage pulse
Dimensions
• 1” – 6 3 ⁄
4
” H x 3 5 ⁄
8
” W
• 1½” – 7¼” H x 3 5 ⁄
8
” W
• 2” – 9½” H x 6 1 ⁄
8
” W
Warranty
• Five years
P220G SERIES FRICTION LOSS DATA*
Size
1"
1 1 /
2
"
2"
Configuration
Globe
Angle
Globe
Angle
Globe
Angle
5
4.00
4.00
10
4.20
4.20
20
3.20
3.10
30
4.10
2.70
1.60
1.30
40
7.20
4.80
2.30
1.60
50
3.60
2.80
60 70 gpm Flow
80 90 100 110 120 130 140 150 180
5.20
4.00
7.00
5.50
9.20
7.10
2.10
1.20
11.20
8.90
2.70
1.60
13.60
10.90
3.30
2.00
16.40
13.50
4.00
2.40
4.80
2.80
5.60
3.30
6.50
3.90
7.50
4.40
8.70
5.20
P220GS SERIES FRICTION LOSS DATA*
Size
1"
1 1 /
2
"
2"
Configuration
Globe
Angle
Globe
Angle
Globe
Angle
5
4.63
4.14
10
4.74
4.64
20
3.10
2.54
1.14
0.95
30
6.05
5.53
1.56
1.51
40
10.75
9.46
2.85
2.28
50
4.36
3.69
60
6.28
5.29
gpm Flow
70
8.57
6.97
80
11.20
9.26
3.57
2.79
90
14.03
11.80
4.62
3.50
100
17.20
14.60
5.33
4.41
110
20.46
17.40
6.80
5.62
120
8.20
6.39
130
9.02
7.35
140
10.46
8.81
150
11.61
9.37
*Note: For optimum performance when designing a system, be sure to calculate total friction loss to ensure sufficient downstream pressure.
For optimum regulation performance, size regulating valves toward the higher flow ranges.
Flow rates are recommended not to exceed 5 psi loss.
Specifying Information—P220G and P220GS Series
P220G S -27-O X-XXX
Body Style Size Type Optional
P220G S
P220G—P220G Series Plastic Valve
P220GS—P220GS Plastic Scrubber Valve
27
27—NPT, Pressure-regulated (5–100 psi)
O X
4—1"
6—1 1
8—2"
/ 2 "
E—Effluent
XXX
DL—DC Latching Solenoid for LSM System
DLE—DC Latching Solenoid for LSM System, Effluent
Example: A 1” P220G Series plastic electric, pressure-regulating valve with a 60 Hz solenoid, would be specified as: P220G-27-04
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 97 3/6/19 1:23 PM
VALVE BOXES
Valve boxes are used for practical, aesthetic and security reasons wherever valves or off-fairway GDC modules need to be installed below grade but remain accessible for monitoring or service. Toro offers a full line of valve boxes that will fit valves up to 4” and 1-, 2- and 4- station LSM modules.
FEATURES & BENEFITS
T-lip Lid Design
The T-lip lid design keeps dirt out to prevent jamming and provides improved grip for lid removal and easy access to the equipment inside. The secure snap fit and bolt retention ensure that only authorized personnel will have access.
Wide Range Of Sizes
Toro offers a wide range of round and rectangular boxes to meet every need. 6”, 7” and 10” round; and 12” x 17” and 15” x 21” rectangular in both 12” standard depth and 6” shallow depth.
With the reverse stack capability and rectangular 6” extensions tackling deeper installations can be easily accomplished.
Variety of Colors
Toro valve boxes and covers come in a wide variety of colors to blend into the surrounding environment or to identify specific applications. Green for grass, tan for sand and purple for nonpotable water applications. Black and brown to blend in with a variety of soils and mulches and gray for electrical applications.
Durable Construction
Valve boxes are constructed of H.D.P.E. (High-Density
Polyethylene) with heavy-duty wall sections designed to provide a secure enclosure to protect your equipment investment.
Rectangular Extension Boxes
Rectangular extensions allow for deeper installation in
6” increments
Reverse Stack
Allows for deeper installations in an initial 12” then 12” increments.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 98 3/6/19 1:23 PM
Specifying Information–Round Valve Boxes
TVBXX RNDXX
Type Size Color Description
TVB XX RND
TVB—Toro Valve Box 6—6" Round
7—7" Round
10—10" Round
XX
Blank— Green lid and black box
G—Green lid and box
GY—Gray lid and box (electrical)
T—Tan lid and box
E—Purple lid and box (effluent)
BK—Black lid and box
BR—Brown lid w/black box
Example: A Toro 7" round valve box for effluent water applications would be specified as: TVB-7RND-E
Description
6"
7"
10"
A
Length
6.3"
6.8"
9.9"
B
Width
8.1"
9.3"
13.0"
C
Height
9.0"
9.0"
10.3"
Weight
(lbs)
1.15 lbs
1.80 lbs
3.39 lbs
Specifying Information–Round Valve Box Separates
TVBXXXXX XX
Type Size Box or Lid Color Description
TVB
TVB—Toro Valve Box
XXXXX
6LID—6" Round lid
7LID—7" Round lid
10LID—10" Round lid
BOX6—6" Box (black only)
BOX7—7" Box (black only)
BOX10—10" Box (black only)
XX
G—Green lid
GY—Gray lid (electrical)
T—Tan lid
E—Purple lid (effluent)
BK—Black lid
BR—Brown lid
Example: A Toro 7" round valve box lid for effluent water applications would be specified as: TVB-7LID-E
Description
6" lid
7" lid
10" lid
A
Length
6.3"
6.8"
9.9"
B
Width
8.1"
9.3"
13.0"
C
Height
1.2"
1.7"
2.1"
Weight
(lbs)
.31 lbs
.52 lbs
1.13 lbs
Specifying Information—Rectangular Valve Boxes
TVBXXXX XX-XX
Type Size Height Color Description
TVB
TVB—Toro
Valve
Box
XXXX
1217—12"X17"
1521—15"X21"
XX
6—6" High
12—12" High
XX
Blank— Green lid and black box
G—Green lid and box
GY—Gray lid and box (elect.)
T—Tan lid and box
E—Purple lid and box (effluent)
BK—Black lid and box
BR—Brown lid w/black box
Example: A Toro 12x17x6 rectangular valve box for effluent water applications would be specified as: TVB-1217-6-E
Description
12x17x6
12x17x12
15x21x6
15x21x12
A
Length
18.8"
21.0"
24.3"
25.7"
B
Width
13.8"
16.0"
18.8"
19.1"
C
Height
6.8"
12.3"
7.2"
12.3"
Weight
(lbs)
6.56 lbs
9.05 lbs
8.75 lbs
12.11 lbs
Specifying Information—Rectangular Extensions
TVBXXXX -EXT6BOX -XX
Type Size Height Color Description
TVB
TVB—Toro
Valve
Box
XXXX
1217—12"X17"
1521—15"X21"
EXT6BOX
EXT6BOX—6" High
XX
Blank— Black box
G—Green box
GY—Gray box (elect.)
T—Tan box
E—Purple box (effluent)
Example: A Toro 6" extension for a 12"x17" tan valve box would be specified as: TVB-1217-EXT6BOX-T
Description
12x17x6
15x21x6
A
Length
18.8"
24.3"
B
Width
13.8"
17.8"
C
Height
6.8"
6.9"
Weight
(lbs)
6.71 lbs
8.89 lbs
Description
6" box
7" box
10" box
A
Length
6.3"
6.8"
9.9"
B
Width
8.1"
9.3"
13.0"
C
Height
9.0"
9.0"
10.3"
Weight
(lbs)
.77 lbs
1.19 lbs
2.26 lbs
Specifying Information—Rectangular Valve Box Separates
TVBXXXX -LID -XX
Type Size Height Color Description
TVB
TVB—Toro Valve
Box
XXXX
1217—12"X17"
1521—15"X21"
LID
LID—Lid
XX
Blank— Green lid
G—Green lid
GY—Gray lid (elect.)
T—Tan lid
E—Purple lid (effluent)
BK—Black lid
BR—Brown lid
Example: A Toro 12x17 rectangular valve box lid for effluent water applications would be specified as: TVB-1217-LID-E
Type
TVB
TVB—Toro
Valve
Box
TVBXXXX XXXXX
Size
XXXX
1217—12"X17"
1521—15"X21"
Height
XX
6BOX—6" High valve box
12BOX—12" High valve box
Example: A Toro 12x17X6 rectangular valve box would be specified as: TVB-1217-6BOX-BK
Description
12"x17" lid
15"x21" lid
12"x17"x6" box
12"x17"x12" box
15"x21"x6" box
15"x21"x12" box
A
Length
16.9"
21.3"
18.8"
21"
24.3"
25.7"
B
Width
11.8"
14.9"
13.8"
16"
17.8"
19.1"
C
Height
2.0"
1.9"
6.8"
12.3"
6.9"
12.3"
Weight
(lbs)
2.73 lbs
3.23 lbs
3.83 lbs
6.32 lbs
5.66 lbs
8.88 lbs
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 99 3/6/19 1:23 PM
DRY BOXES
A
B
C
D
E
F
Dual Bolt Retention covers
Ensures proper sealing and vandal resistance.
Heavy Duty Lid
Construction molded from High Density Polyethylene (H.D.P.E), available in Green, Tan, Purple, Black, Gray and Brown.
Accessory Plate (optional)
Attaches directly to the lid and allows attachments of various components like GDC modules, elec/hyd converters, battery operated controllers and more.
Dual Seal Lid
Keeps water and critters from creeping in from the top.
Heavy Duty Box
Construction molded from High Density Polyethylene (H.D.P.E), available in Green, Tan, Purple, Black, Gray and Brown.
Dirt Skirt (optional)
Attaches directly to the bottom of the valve box and provides an outer seal to prevent intrusion from burrowing rodents, water and critters.
A
D
TVB-1217-DB (Dry Box)
D
Specifications
Static Vertical Load Rating:
SCTE – Light Duty, Pedestrian
Properties of
Base Material
ASTM Test
Method
HDPE
Tensile Strength
Flexural Modulus
D-638
D-790
2700-4,400 psi
(Typical Range)
Minimum 140,000 not to exceed 24,000 psi
Notched Izod Impact
Strength
Deflection Temperature
@ 66psi
D-256
D-648
0.5 - 3.0 (Typical Range)
150-200 F (Typical Range)
Density
Electrical Dielectric
Strength
D-792
D-149
Minimum 0.95- not to exceed 0.965
400-600 V/mil
(Typical Range)
Chemical Resistance D-543
Water Absorption
Warranty
• Five years
D-570
Very Resistant
Less than 1% weight change
A
D
D
B
TVB-12RND-DB
(Round Dry Box)
B
E E
C
TVB-1217-DBAP
(Accessory plate)
Type
Specifying Information—Dry Box Valve Boxes
TVB-1217-12DB -XX
Size Height Color Description
TVB
TVB—Toro
Valve
Box
1217
1217—12"X17"
12DB
12DB—12" High
Dry Box
XX
Blank— Green lid and black box
G—Green lid and box
GY—Gray lid and box (elect.)
T—Tan lid and box
E—Purple lid and box (effluent)
BK—Black lid and box
BR—Brown lid w/black box
Example: A Toro 12"x17"x12" valve box for electrical applications would be specified as: TVB-1217-12DB-GY
Description
12DB
Description
DBAP
DBDS
A
Length
21.0"
A
Length
11.5"
19.8"
B
Width
16.0"
B
Width
8.5"
14.5"
C
Height
12.3"
C
Height
.2"
1.3"
Weight
(lbs)
9.8 lbs
Weight
(lbs)
0.99 lbs
2.8 lbs
F
F
Type
Specifying Information—Dry Box Valve Boxes
TVB-12RND-DB -XX
Size Height Color Description
TVB
TVB—Toro
Valve Box
12RND
12" Round
DB
Dry Box
XX
G—Green
GY—Gray (electrical)
T—Tan
E—Purple (effluent)
BK—Black
BR—Brown
Example: A Toro 12" round Dry Box for effluent water applications would be specified as: TVB-12RND-DB-E
Description
DB
A
Length
11.5"
B
Width
14.5"
C
Height
Weight
(lbs)
12.75" 7.12 lbs
TVB-1217-DBAP
TVB-1217-DBDS
Accessories
DRY BOX Accessory Plate
DRY BOX Dirt Skirt
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 100 3/6/19 1:23 PM
470 QUICK COUPLER VALVES
470 Quick Coupler Valves
Whether it’s for hand watering the hot spots, fertilizer wash in, washing down equipment or filling the sprayer and lakes the
400 Series provides a full family of quick coupling valves and accessories that connect you directly to the main water source to fill all your hand watering needs.
476-01
474-44
473-00
FEATURES & BENEFITS
Full range of flows from 0 to 100 gallons per minute
¾”, 1” and 1½” one- and two-piece single-lug models including ACME thread key connections to meet a variety of installation requirements
Hose swivel provides 360° movement without hose tangling for ease of use
A variety of sizes meet various applications
Metal and vinyl locking and non-locking covers
Effluent (lavender-colored) locking cover
477-00
464-03
Warranty
• Five years
Ordering Information—Quick Coupler Valve Accessories
Order Number
463-01
464-01
464-02
464-03
465-01
466-01
477-00
477-01
477-02
Description
1 /
2
" Female, 3 /
4
" Male, Single-lug Coupler Key
3 /
4
" Female, 1" Male, Single-lug Coupler Key
1" Female, Single-lug Coupler Key
1" ACME Thread Coupler Key
1 1
1 1
/
4
" Inlet, 3 /
4
" Female, 1" Male, Single-lug Coupler Key
/
4
" Female, 1 1 /
2
" Male, Single-lug Coupler Key
3 /
4
" Female NPT x 3 /
4
" MHT Hose Swivel
1" Female NPT x 3 /
4
" MHT Hose Swivel
1" Female NPT x 1" MHT Hose Swivel
Toro Model
Number
473-00
474-00
474-01
474-03
474-04
474-21
474-24
474-40
474-41
474-44
475-00
475-01
476-00
476-01
476-04
470 SERIES FRICTION LOSS DATA
Model
473
474
475
476
10
1.5
15
3.1
20
5.3
1.1
25
8.5
2.2
1.0
30
3.6
1.8
gpm Flow
35
5.7
2.7
40
8.0
3.6
1.0
50
6.4
1.7
60
9.8
2.6
70
3.6
85
5.6
100
8.8
Note: For optimum sprinkler performance when designing a system, be sure to calculate total friction loss to ensure sufficient downstream pressure.
Flow rates are recommended not to exceed 5 psi loss. Values listed in psi.
Description
QCV .75, SS CVR
QCV 1, SS CVR
QCV 1, VYL CVR
QCV 1, VYL CVR, W/LK
QCV 1, LAV VYL CVR
QCV 1, VYL CVR, 2PC
QCV 1, LAV VYL CVR, 2PC
QCV 1, SS CVR, ACME
QCV 1, VYL CVR, ACME
QCV 1, LAV VYL CVR, W/LK, ACME
QCV 1.25, SS CVR
QCV 1.25, VYL CVR
QCV 1.5, SS CVR
QCV 1.5, VYL CVR
QCV 1.5, LAV VYL CVR
1
1"
1
1 1
/ 2 "
/
2
"
1 1 /
2
"
1"
1"
1"
1"
3 /
4
"
1"
1"
1"
1"
1"
1"
Specifying Information—Quick Couplers
Inlet Size
NPT Threads
Body
Type
Outlet
Key Size
Corresponding
Key(s)
Valve Cover
Type
Corresponding
Swivel(s)*
477-00 477-01 477-02
1 Piece
1 Piece
1 Piece
1 Piece
1 Piece
2 Piece
2 Piece
1 Piece
1 Piece
1 Piece
1 Piece
1 Piece
1 Piece
1 Piece
1 Piece
1
1
1
1
3
1"
1"
1"
1"
1"
1"
1"
1"
1"
1
1
1
1
1 1
/
4
"
/
4
"
/
4
"
/ 2 "
/
2
"
/
2
"
463-01
464-01/464-02
464-01/464-02
464-01/464-02
464-01/464-02
464-01/464-02
464-01/464-02
464-03
464-03
464-03
465-01
465-01
466-01
466-01
466-01
Stainless Steel
Stainless Steel
Yellow Vinyl, Spring Loaded
Yellow Vinyl, Locking, Spring Loaded
Lavender Vinyl, Locking, Spring Loaded
Yellow Vinyl, Spring Loaded
Lavender Vinyl, Locking, Spring Loaded
Stainless Steel
Yellow Vinyl, Spring Loaded
Lavender Vinyl, Locking, Spring Loaded
Stainless Steel
Yellow Vinyl
Stainless Steel
Yellow Vinyl, Spring Loaded
Lavender Vinyl, Locking, Spring Loaded
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A/B
A/B
A/B
A/B
A/B
A/B
A
A
A
B
B
B
B
B
B
B
B
A
B
A
A
B
B
A/B
A/B
A/B
A/B
A/B
A/B
* A – Attaches directly to the quick coupler key. B – Requires additional fittings to be used with the quick coupler key.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 101 3/6/19 1:23 PM
TWILIGHT
™
GOLF CUP AND PERIMETER LIGHTING
The Twilight ™ Golf Cup promotes twilight putting and evening special events. Highlight the beauty of the course to attract special events to the venue and drive additional revenue. The Twilight ™ Golf Cup will set you apart from your competition by lighting up the putting green allowing members, guests and customers to remain longer and enjoy other attractions your facility has to offer like dining, lounges and the Pro Shop.
FEATURES & BENEFITS
Twilight Golf Cup
The wireless Twilight ™ Golf Cup is sized to easily install into any standard cup hole. Convenient battery operation and wireless technology makes it quick to install. With high illumination, energy efficient LED lamps, and a proprietary optical lens, the flag and cup placements pop off the green. Their Lithium–Ion battery will provide illumination for a full eight hours and requires about five hours charge time to achieve full capacity. Charger charges up to three golf cups at once.
Quick-Connect Perimeter Lighting
The quick-connect system for perimeter lighting is a snap. The perimeter lights plug in for use during evening activities and are removable during daytime hours. Simply flip open the top of the perimeter in-ground stake and snap the lighting fixture into place creating a low voltage connection. Permanently installed receptacles are flush mounted to grade, just off the putting green surface. The directional luminaire is crafted from solid brass and has an adjustable knuckle to place the light just where you want it.
Quick-Connect
Perimeter
Stake
LED Technology Provides High
Illumination
Working in conjunction with a proprietary optical lens design, the
LEDs provide a narrow beam of light to brightly illuminate the flag.
Quick-Connect
Perimeter Light
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 102 3/6/19 1:23 PM
TWGC-3P
TWGC-CUPANDCATCH TWGP-STAKE
SPECIFICATIONS
Operational
Twilight ™ Golf Cup (TWGC)
• White ABS cup aligns notches in solid brass ball catch with notches in cup. Fits most standard and putting green flags.
• CREE XB-D white LEDs, 3200K color temperature
• Bottom compartment houses the on/off switch, charging port and
Lithium-Ion battery.
• Charger will charge up to three golf cups at one time – estimated charging time is 5 hours.
• Lithium-Ion battery will run the cup light for up to 8 hours
Perimeter Post Light (TWGP)
• Solid brass die cast construction of the luminaire – Tempered glass lens encased in a silicone gasket to create a weather resistant seal.
• Provided with a 5W LED MR16 lamp
• Solid brass quick-connect adaptor is mounted to the bottom of the
36” stem
• Adjustable head rotates vertically allowing for on-site adjustability, includes low-glare lamp shield
Perimeter In-Ground Stake (TWGP-STAKE)
• Sturdy, in-grade, 3” diameter stake provides electrical connection to the transformer and stability for the 36” tall perimeter post light
• Resin flip top for easy connection
• Flush mount to grade when not in use with fixture inserted
• Powered by a TUV certified low voltage transformer
Electrical
Twilight ™ Golf Cup (TWGC)
• LEDs – 12VDC, (3) 1 Watt light emitting diodes
• Lithium-Ion Battery – 11.1 VDC 2600 mAh
• Charger – 120VAC/12VDC
Perimeter Light (TWGP)
• 5 Watt LED lamp, 12V AC
TWGP-TRANS-XXXXX - Transformer
• 120V AC 6’ long cord
• 12V-15V output for the 360SS
• 12V-22V output for the 1120SS
Dimensions
• TWGC Cup light only: 4 5 /
16
” Dia. x 6 5 /
16
” H
• Flag height: 30 1 /
4
” H
• TWGP Perimeter Post Light: 43” H installed
• TWGP Receptacle – exposed diameter 3 5 /
8
”
Warranty
• Twilight ™ Golf Cup, 2 years
• Perimeter Post Light, limited lifetime warranty
• Perimeter in-ground stake & Hub, 3 years
• Transformers, limited lifetime warranty
• LED lamp in Perimeter Post Light, 5 years
• Lithium-Ion Battery, 2 years
TWGP-STAR36-12-L5 TWGC
Specifying Information—Twilight Perimeter Lighting
Model Number Description
TWGP-STAR36-12-L5 Perimeter Post Light w/Starburst Luminaire on 36" Post, w/12-Volt, 5-Watt LED, Vertical-Spread Lens
TWGP-STAKE Stake, Stabilizing, w/Electrical Receptacle Assembly, w/2
Waterproof Wire Splices
TWGP-TRANS-360SS 360-Watt Transformer, Indoor/Outdoor, Wall-Mountable
TWGP-TRANS-360DB 360-Watt Transformer, Direct-Burial
TWGP-TRANS-1120SS 1120-Watt Transformer, Indoor/Outdoor, Wall-Mountable
TWGP-HUB Hub Electrical Enclosure, w/4 InLine Fuse Holders, w/4
5-Amp Fuses,4 Spare 5-Amp Fuses, 4 Waterproof Wire
Splices
TWGP-WIRE-12-2-500 Direct-Burial Cable, 12-Gauge, 2-Conductor, 500-Foot Spool
TWGP-ELECREC
TWGP-5WLAMP
TWGP-LID
TWGP-LENS
TWGP-HEXLOUVER
TWGP-GREASE
Receptacle, Electrical, w/2-Wire Splice, Replacement
Lamp, LED, 5-Watt, Flood, 27K, Replacement
Receptacle, Electrical, Lid, Replacement
Vertical-Spread Lens, Replacement
Hex Louver, Replacement
Grease, Lubricating/Sealing, for Replacement LED Installation
Specifying Information—Twilight Cup Lights
Model Number
TWGC
TWGC-3P
TWGC-BALLCATCH
TWGC-CHARGER-S
TWGC-CUP
Twilight Wireless Golf Cup Light, Single Unit
Kit, Twilight Golf Cup, 3-Pack
Ball Catch, Brass
Charger, Power Supply
Description
Twilight Wireless Golf Cup, Single Cup
TWGC-CUPANDCATCH Twilight Wireless Golf Cup, Single Unit, w/Ball Catch, Brass
TWGC-FLAG Twilight Wireless Golf Cup Flag, Pole and Nut
TWGC-LIBATT Battery, Lithium Ion, Rechargeable
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 103 3/6/19 1:23 PM
Wire Sizing
Current Draw (Amperage)
Standard Wattage Solenoid
Product
Lynx Smart
Satellite
OSMAC ® G3
Satellite
8
9
10
6
7
4
5
2
3
0
1
13
14
15
16
11
12
13
14
15
16
Solenoids
0
5
6
7
8
1
2
3
4
9
10
11
12
Assumes 24 VAC, 50/60 Hz Output
120 VAC, 60 Hz 240 VAC, 50 Hz
0.29
0.35
0.41
0.47
0.53
0.59
0.65
0.77
0.81
0.85
0.88
0.05
0.11
0.17
0.23
0.71
0.77
0.83
0.89
0.95
1.01
0.20
0.25
0.30
0.34
0.39
0.43
0.48
0.52
0.56
0.61
0.65
0.69
0.73
Inrush Holding Inrush Holding
0.37
0.45
0.53
0.61
0.69
0.77
0.85
1.00
1.03
1.05
1.14
0.05
0.13
0.21
0.29
0.93
1.01
1.09
1.17
1.25
1.33
—
0.26
0.35
0.40
0.46
0.50
0.64
0.70
0.73
0.77
0.80
0.85
0.91
0.21
0.26
0.31
0.35
0.40
0.45
0.50
0.61
0.62
0.63
0.66
0.03
0.07
0.12
0.17
0.54
0.59
0.64
0.68
0.73
0.81
—
0.30
0.34
0.36
0.39
0.42
0.44
0.46
0.50
0.53
0.57
0.57
0.57
0.15
0.19
0.22
0.25
0.28
0.31
0.35
0.53
0.55
0.58
0.60
0.03
0.06
0.09
0.12
0.38
0.41
0.44
0.47
0.51
0.54
0.19
0.22
0.25
0.28
0.30
0.33
0.36
0.38
0.41
0.43
0.46
0.48
0.51
Solenoids
0
1
8
9
6
7
10
11
4
5
2
3
31
32
0
1
12
13
14
15
16
25
26
27
28
29
30
21
22
23
24
17
18
19
20
14
15
16
10
11
12
13
6
7
8
9
2
3
4
5
Spike Guard ™ Low Wattage Solenoid
Product
Lynx Smart
Satellite
OSMAC ® G3
Satellite
Assumes 24 VAC, 50/60 Hz Output
120 VAC, 60 Hz 240 VAC, 50 Hz
Inrush Holding Inrush Holding
—
0.24
0.20
0.22
0.21
0.22
0.20
0.21
0.19
0.22
0.24
0.27
0.29
0.31
1.01
1.04
0.05
0.07
0.10
0.12
0.15
0.17
0.34
0.36
0.39
0.41
0.44
0.79
0.80
0.85
0.90
0.93
0.96
0.60
0.61
0.63
0.66
0.68
0.70
0.74
0.76
0.46
0.47
0.49
0.52
0.54
0.56
0.58
0.26
0.29
0.31
0.33
0.35
0.39
0.41
0.43
0.17
0.19
0.21
0.23
0.25
0.27
0.84
0.86
0.05
0.07
0.09
0.11
0.13
0.15
0.29
0.31
0.33
0.35
0.37
0.74
0.75
0.77
0.79
0.81
0.82
0.58
0.60
0.62
0.64
0.66
0.68
0.70
0.72
0.44
0.46
0.48
0.50
0.52
0.54
0.56
0.24
0.27
0.29
0.31
0.33
0.37
0.39
0.41
0.13
0.15
0.17
0.18
0.20
0.22
0.62
0.64
0.03
0.05
0.06
0.08
0.10
0.12
0.23
0.25
0.27
0.29
0.30
0.55
0.57
0.58
0.59
0.60
0.61
0.44
0.46
0.47
0.49
0.50
0.51
0.53
0.54
0.34
0.35
0.36
0.37
0.38
0.40
0.43
0.23
0.24
0.25
0.26
0.28
0.29
0.30
0.32
0.12
0.14
0.15
0.17
0.18
0.20
0.61
0.62
0.03
0.05
0.06
0.08
0.09
0.11
0.21
0.23
0.24
0.26
0.27
0.54
0.56
0.57
0.58
0.59
0.60
0.43
0.45
0.46
0.48
0.49
0.50
0.52
0.53
0.33
0.35
0.36
0.38
0.39
0.40
0.42
0.22
0.23
0.24
0.26
0.27
0.28
0.30
0.31
CONVERSION INFORMATION
■
■
■
■
■
■
All gallons per minute are shown in U.S.
To convert to imperial gallons per minute, multiply by 0.833
To convert to liters per minute, multiply by
3.78
To convert pounds per square inch (psi) to atmospheres, divide by 14.7
To convert pounds per square inch (psi) to kilograms per square centimeter (kg/cm2), divide by 14.22
To convert feet to meters, divide by 3.28
WINTERIZING SPECIFICATIONS
In freezing climates, valves should be properly winterized to prevent freeze-related damage.
SPRINKLER SPACING
■
■
■
The Toro Company does not recommend designing
for zero (0) mph wind conditions.
Square Spacing
No wind - 55% of diameter
4 mph wind - 50% of diameter
6,4 kph wind - 50% of diameter
8 mph wind - 45% of diameter
12,8 kph - 45% of diameter
Triangular Spacing
No wind - 60% of diameter
4 mph wind - 55% of diameter
6,4 kph wind - 55% of diameter
8 mph wind - 50% of diameter
12,8 kph - 50% of diameter
Single Row Spacing
No wind - 50% of diameter
4 mph wind - 50% of diameter
6,4 kph wind - 50% of diameter
8 mph wind - 45% of diameter
12,8 kph - 45% of diameter
Design in consideration of the worst wind conditions.
PRECIPITATION RATE FORMULAS
■
Square-spaced sprinklers in pattern:
gpm of full-circle x 96.3
(Spacing)2
■ Triangular-spaced sprinklers in pattern:
gpm of full-circle x 96.3
(Spacing)2 (.866)
■ Area and flow:
Total gpm of zone x 96.3
Total irrigated square
feet of zone
■
Single row:
gpm of full-circle x 96.3
(Spacing) (Scallop)
Spacing
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 104 3/6/19 1:23 PM
THE TORO LIMITED WARRANTY GOLF IRRIGATION
The Toro Company and its affiliate, Toro
Warranty Company, pursuant to an agreement between them, jointly warrants to the owner, each new piece of irrigation equipment (featured in the current catalog at date of installation) against defects in material and workmanship for a period described below, provided they are used for irrigation purposes under manufacturer’s recommended specifications and instructions.
During the warranty period, we will repair or replace, at our option, any part found to be defective. Your remedy is limited solely to the replacement or repair of defective parts.
This warranty does not apply (i) to Acts of
God (e.g., lightning, flooding, etc.); or (ii) to products not manufactured by Toro when used in conjunction with Toro products; or (iii) where equipment is used, or installation is performed in any manner contrary to Toro’s specifications and instructions, or where equipment is altered or modified.
Return the defective part to your irrigation contractor or installer, or your local Golf
Irrigation Distributor, or contact:
The Toro Company
5825 Jasmine Street, Riverside, CA 92504
(800) 664-4740
For the location of your nearest Toro distributor outside the U.S., call: (951) 688-9221.
Neither Toro nor Toro Warranty Company is liable for indirect, incidental or consequential damages in connection with the use of equipment, including but not limited to: vegetation loss, the cost of substitute equipment or services required during periods of malfunction or resulting non-use, property damage or personal injury resulting from installer’s actions, whether negligent or otherwise.
Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
All implied warranties, including those of merchantability and fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights and you may have other rights which vary from state to state. Proof of installation date required for any warranty claim and for any product covered by this warranty.
Lynx ® Smart Satellite
Lynx Smart Satellite is covered by this warranty for 2 years from the date of installation.
Golf Sprinklers
All Toro golf sprinklers and conversion assemblies are covered by this warranty for 3 years from the date of installation.
All Toro golf sprinklers purchased and installed with a Toro swing joint will be covered by a fiveyear warranty*. Proof of simultaneous installation required for any warranty claim.
INFINITY add-on accessories will be covered by a 1 year warranty.
* Excludes 590GF Series and sprinkler conversion assemblies.
Swing Joints
Toro swing joints are covered by this warranty for 5 years from the date of installation.
Warranty covers defects in manufacturing and excludes damage resulting from natural phenomenas such as frost heave.
Control Systems, Turf Guard ® , Valve
Boxes, Dry Boxes and Lynx Smart
Module
All Toro golf control systems (central controls, field satellite controllers, GDC, Turf Guard and
Sensor Input Kits), Valve Boxes and Dry Boxes, unless covered by a Toro NSN Support Plan, are covered by this warranty for 1 year from date of installation.
Twilight ™ Golf Lighting
All Twilight Golf Lighting products are warranted for a period of 3 years from the date of installation with the exceptions shown below. Proof of installation date required for all warranty claims.
• TWGP perimeter post lights – limited lifetime
• Transformers – limited lifetime
• FLEX GOLD ™ Series LED lamps – 5 years
• Lithium Ion battery – 2 years
To request warranty on all Toro Golf Lighting products, please contact:
Lighting Customer Support
(800) 955-4831 (7:00 a.m. and 5:00 p.m. PST)
Monday – Friday
Valves
220G Series, P-220G Series and P-220GS Series valves are covered by this warranty for 5 years from date of installation. 470 Series quick coupler valves are covered by this warranty for 2 years from date of installation.
Limited lifetime warranties may require that the defective product be returned to Toro for repair.
Please contact the Lighting Customer Support
Department for direction.
All failed Golf Lighting products must be returned to Toro at the following address:
The Toro Company
5825 Jasmine Street, Riverside, CA 92504
Att: Lighting warranty
DL2000 ™ Subsurface Drip Irrigation
Toro DL2000 ™ Subsurface Drip Irrigation products are covered by this warranty for 2 years from date of installation.
We reserve the right to improve our products and make changes in the specifications and designs without notice and without incurring obligation.
Products depicted in this brochure are for demonstration purposes only. Actual products offered for sale may vary in design and features.
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 105 3/6/19 1:23 PM
GOLF IRRIGATION DISTRIBUTORS
International distributors can be found at: www.toro.com/locator
24
25
23
21
9 11
21
18
14
21
8
4
10
12
13
7
16
1
3
2
19
17
20
15
6
22
5
NORTH CAROLINA SOUTH CAROLINA TENNESSEE VIRGINIA WEST VIRGINIA
Orders: 800-232-8676 Office: 800-932-8676 smithturf.com
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 106 3/6/19 1:24 PM
Our American Partners
1. Century Equipment, Inc.
(419) 865-7400
2. E. H. Griffith, Inc.
(412) 271-3365
3. Grassland Equipment & Irrigation Corp.
(518) 785-5841
4. Kona Irrigation Supply, Ltd.
(808) 329-1167
5. Hector Turf
(954) 429-3200
6. Jerry Pate Turf & Irrigation, Inc.
(850) 479-4653
7. Kenney Machinery Corp.
(317) 872-4793
8. L. L. Johnson Distributing Company
(303) 320-1270
9. Midland Implement Company, Inc.
(406) 248-7771
10. Midwest Turf & Irrigation, Inc.
(402) 895-8900
11. MTI Distributing, Inc.
(763) 592-5600
12. Professional Turf Products
(817) 785-1900
13. Reinders, Inc.
(262) 786-3300
14. Simpson Norton Corporation
(623) 932-5116
15. Smith Turf & Irrigation L.L.C.
(704) 393-8873
16. Spartan Distributors, Inc.
(616) 887-7301
17. Storr Tractor Company
(908) 722-9830
18. Turf Equipment & Irrigation
(801) 566-3256
19. Turf Equipment & Supply Company, Inc.
(410) 799-5575
20. Turf Products L.L.C.
(860) 763-3581
21. Turf Star, Inc.
(800) 585-8001
22. Wesco Turf Inc.
(941) 377-6777
Our Canadian Partners
23. Ful-Flo Industries, Ltd.
(204) 633-4414
24. Oakcreek Golf and Turf Inc.
(403) 279-2907
25. Turf Care Products Canada
(905) 836-0988
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 107 3/6/19 1:24 PM
Toro is always there to help you care for your landscapes the way you want, when you want, better than anyone else.
www.toro.com
5825 Jasmine Street
Riverside, CA 92504-1183
Phone: 877-345-8676
Fax: 800-862-8676
©2019 The Toro Company
All Rights Reserved
PN: 19-5003-IG
We reserve the right to improve our products and make changes in the specifications and designs without notice and without incurring obligation.
Products depicted in this brochure are for demonstration purposes only.
Actual products offered for sale may vary in design and features.
108
19-5003-IG-GOLF-CATALOG-2019-FINAL.indd 108 facebook.com/Toro.Company
twitter.com/torogolf youtube.com/toro
3/6/19 1:24 PM
Advertisement