Gruvlok 0390037067 Fig 7076 2-1/2 x 2 x 2-1/2 in. Grooved x Threaded Concentric Schedule 40 Standard Rust Inhibiting Painted Ductile Iron Reducer Specification

Add to My manuals
3 Pages

advertisement

Gruvlok 0390037067 Fig 7076 2-1/2 x 2 x 2-1/2 in. Grooved x Threaded Concentric Schedule 40 Standard Rust Inhibiting Painted Ductile Iron Reducer Specification | Manualzz

Gruvlok ® Fittings for Grooved-End Pipe

Fig. 7060

Tee

Fig. 7076

Concentric Reducer (GR x THD)

Fig. 7068

Fig. 7050 Fig. 7060

Fig. 7051

Fig. 7072

Galvanized Gruvlok

Fittings are NSF-61 and

Low Lead Approved

Gruvlok fittings are available through 24” nominal pipe size in a variety of styles.

Use the Fitting Size Table to convert nominal pipe size to corresponding pipe O.D.

These fittings are designed to provide minimum pressure drop and uniform strength.

Depending on styles and size, Gruvlok fittings are provided in various materials including ductile iron, forged steel or fabricated steel.

Pressure ratings of Gruvlok standard fittings conform to those of Fig. 7001

Gruvlok coupling.

For Listings/Approval Details and Limitations, visit our website at www.asc-es.com or contact an

ASC Engineered Solutions™ Sales Representative.

Material Specifications

Cast Fittings

Ductile iron conforming to ASTM A536,

Grade 65-45-12

Malleable iron conforming to ASTM A47

Fabricated Fittings

1-12" Carbon steel, Schedule 40, conforming to ASTM A53, Grade B

14-24" Carbon steel, 0.375 wall, conforming to ASTM A53, Grade B

Coatings

Rust inhibiting paint

Color: Orange (standard)

Hot Dipped Zinc Galvanized conforming to

ASTM A153 (optional)

Other Colors Available

(IE: RAL3000 and RAL9000)

PROJECT INFORMATION

Project:

Address:

Contractor:

Engineer:

Submittal Date:

Notes 1:

Notes 2:

APPROVAL STAMP

Approved

Approved as noted

Not approved

Remarks: page 1

Gruvlok ® Fittings for Grooved-End Pipe

Tee & Concentric Reducer

Fig. 7060, 7076

In./DN(mm)

4

100

5   1/4 O.D.

133.0

5   1/2 O.D.

139.7

5

125

6   1/4 O.D.

159.0

6   1/2 O.D.

165.1

6

150

8

200

2 1/2

65

3 O.D.

76.1

3

80

4   1/4 O.D.

108.0

1 1/2

40

2

50

1

25

1 1/4

32

18

450

20

500

24

600

14

350

16

400

10

250

12

300

In./mm

6.259

159.0

6.500

165.1

6.625

168.3

8.625

219.1

4.500

114.3

5.236

133.0

5.500

139.7

5.563

141.3

2.875

73.0

2.996

76.1

3.500

88.9

4.250

108.0

1.315

33.4

1.660

42.2

1.900

48.3

2.375

60.3

10.750

273.1

12.750

323.9

14.000

355.6

16.000

406.4

18.000

457.2

20.000

508.0

24.000

609.6

Flow Data - Frictional Resistance (Expressed as Equivalent Straight Pipe)

Nominal Size O.D.

Elbow

90°

Ft./m

9.7

3.0

10.0

3.0

10.1

3.1

13.3

4.1

8.3

2.5

8.4

2.6

6.7

2.0

8.0

2.4

5.1

1.6

6.4

2.0

4.1

1.2

4.3

1.3

2.7

0.8

3.4

1.0

1.7

0.5

2.3

0.7

28.9

8.8

32.2

9.8

38.9

11.9

16.7

5.1

20.0

6.1

22.2

6.8

25.5

7.8

45°

Ft./m

5.1

1.6

6.7

2.0

4.9

1.5

5.0

1.5

4.2

1.3

4.2

1.3

3.4

1.0

4.0

1.2

2.6

0.8

3.2

1.0

2.1

0.6

2.2

0.7

1.3

0.4

1.7

0.5

0.9

0.3

1.2

0.4

23.1

7.0

25.7

7.8

31.1

9.5

8.4

2.6

10.0

3.0

17.7

5.4

20.4

6.2

Pipe Wall

Thickness

In./mm

0.280

7.1

0.280

7.1

0.280

7.1

0.322

8.2

0.237

6.0

0.248

6.3

0.248

6.3

0.258

6.6

0.203

5.2

0.197

5.0

0.216

5.5

0.220

5.6

0.133

3.4

0.140

3.6

0.145

3.7

0.154

3.9

0.375

9.5

0.375

9.5

0.375

9.5

0.365

9.3

0.375

9.5

0.375

9.5

0.375

9.5

Branch

Ft./m

24.3

7.4

24.9

7.6

25.3

7.7

33.3

10.1

16.8

5.1

20.1

6.1

20.9

6.4

21.0

6.4

10.3

3.1

10.8

3.3

12.8

3.9

16.1

4.9

6.7

2.0

8.6

2.6

4.4

1.3

5.8

1.8

87.2

26.6

97.3

29.7

113.0

34.4

41.8

12.7

50.0

15.2

64.2

19.6

73.9

22.5

Note:

For the reducing tee and branches, use the value that is corresponding to the branch size. For example: for 6" x 6" x 3" tee, the branch value of 3" is 12.8 ft (3.9).

The Fitting Size Chart is used to determine the O.D. of the pipe that the fittings is to be used with.

Gruvlok Fittings are identified by either the Nominal size in inches or the Pipe O.D. in/mm.

Tee

Run

Ft./m

9.7

3.0

10.0

3.0

10.1

3.1

13.3

4.1

8.3

2.5

8.4

2.6

6.7

2.0

8.0

2.4

5.1

1.6

6.4

2.0

4.1

1.2

4.3

1.3

2.7

0.8

3.4

1.0

1.7

0.5

2.3

0.7

31.1

9.5

34.8

10.6

40.4

12.3

16.7

5.1

20.0

6.1

22.9

7.0

26.4

8.0

page 2

O.D.

In./mm

5.563

141.3

6.259

159.0

6.500

165.1

6.625

168.3

4.250

108.0

4.500

114.3

5.236

133.0

5.500

139.7

8.625

219.1

10.750

273.0

12.750

323.9

14.000

355.6

16.000

406.4

18.000

457.2

20.000

508.0

24.000

609.6

2.875

73.0

2.996

76.1

3.500

88.9

4.000

101.6

1.315

33.4

1.660

42.4

1.900

48.3

2.375

60.3

asc-es.com

Fitting Size

Nominal Size

In./DN(mm)

4   1/4 O.D.

108.0

4

100

5   1/4 O.D.

133.0

5   1/2 O.D.

139.7

5

140

6   1/4 O.D.

159.0

6   1/2 O.D.

165.1

6

150

8

200

10

250

12

300

18

450

20

500

14

350

16

400

24

600

2 1/2

65

3 O.D.

76.1

3

80

3 1/2

90

1 1/2

40

2

50

1

25

1 1/4

32

Gruvlok ® Fittings for Grooved-End Pipe

Fig. 7060

Tee

Fabricated

Center to End

In./mm

7 3/4 C

197

9 C

229

10 C

254

11 C

279

12 C

305

13 1/2 C

343

15 C

381

17 C

432

5 1/2 C

140

6 C

152

6 1/2 C

165

6 1/2 C

165

4 1/2 C

114

4 3/4 C

121

5 C

127

5 1/4 C

133

5 1/2 C

140

2 1/4 C

57

2 3/4 C

70

2 3/4 C

70

3 1/4 C

83

3 3/4 C

95

4 C

101

4 1/4 C

108

O.D.

In./mm

8.625

219.1

10.750

273.1

12.750

323.9

14.000

355.6

16.000

406.4

5.563

141.3

6.259

159.0

6.500

165.1

6.625

168.3

18.000

457.2

20.000

508.0

24.000

609.6

4.000

101.6

4.250

108.0

4.500

114.3

5.236

133.0

5.500

139.7

1.315

33.4

1.660

42.2

1.9

48.3

2.375

60.3

2.875

73.0

2.996

76.1

3.500

88.9

Cast

Nominal

Size

In./DN(mm)

8

200.0

10

250.0

12

300.0

14

350.0

16

400.0

5

125.0

6 1/4 O.D.

159.0

6 1/2 O.D.

165.1

6

150.0

18

450.0

20

500.0

24

600.0

3 1/2

90.0

4 1/4 O.D.

108.0

4

100.0

5 1/4 O.D.

133.0

5 1/2 O.D.

139.7

1

25.0

1 1/4

32.0

1 1/2

40.0

2

50.0

2 1/2

65.0

3 O.D.

76.1

3

80.0

Approx.

Wt. Ea.

Lbs./kg

41.1

18.6

74.5

33.8

94.7

43.0

181.0

82.1

223.0

101.2

334.0

151.5

413.0

187.3

609.0

276.2

16.2

7.3

20.8

9.4

24.4

11.1

25.7

11.7

10.3

4.7

14.1

6.4

9.8

4.4

9.3

4.2

16.1

7.3

4.0

1.8

4.6

2.1

1.8

0.8

2.4

1.1

0.9

0.4

1.5

0.7

5.8

2.6

Fig. 7076

Concentric Reducer (GR x THD)

E to E

O.D.

Nominal

Size

In./DN(mm)

65 x 40

2 1/2 x 2

65 x 50

3 x 3/4

80 x 80

3 x 1

80 x 25

3 x 1 1/4

80 x 32

3 x 1 1/2

80 x 40

3 x 2

80 x 50

1 1/2 x 1

40 x 25

2 x 3/4

50 x 80

2 x 1

50 x 25

2 x 1 1/4

50 x 32

2 x 1 1/2

50 x 40

2 1/2 x 1

65 x 25

2 1/2 x 1 1/4

65 x 32

2 1/2 x 1 1/2

Note:

All are Fabricated Steel.

See Fitting Size chart on next page for O.D.

C - Cast ductile iron, all others are fabricated steel.

End to End

In./mm

64

2 1/2

64

2 1/2

64

64

2 1/2

64

2 1/2

2 1/2

64

2 1/2

64

64

2 1/2

64

2 1/2

2 1/2

64

2 1/2

64

2 1/2

2 1/2

6 4

2 1/2

64

2 1/2

64

Approx.

Wt. Ea.

Lbs./kg

0.5

1.2

0.5

1.3

0.6

0.6

1.2

0.5

1.2

1.3

0.6

1.3

0.6

0.5

1.0

0.5

1.3

1.3

0.6

1.3

0.6

1.0

0.6

0.3

1.0

0.5

0.8

0.4

End to End

In./mm

4

102

4

102

4

89

4

102

4

102

102

4

102

76

3

76

31/2

3

76

3

76

3

2 1/2

64

3

76

3

76

Nominal

Size

In./DN(mm)

125 x 100

6 x 1

150 x 25

6 x 1 1/4

150 x 32

6 x 1 1/2

150 x 40

6 x 2

150 x 50

6 x 3

150 x 80

6 x 4

150 x 100

3 x 2 1/2

80 x 65

4 x 1

100 x 25

4 x 1 1/4

100 x 32

4 x 1 1/2

100 x 40

4 x 2

100 x 50

4 x 2 1/2

100 x 65

4 x 3

100 x 80

5 x 4 asc-es.com

Approx.

Wt. Ea.

Lbs./kg

6.0

2.7

6.0

2.7

6.0

2.0

6.0

2.7

6.0

2.7

2.7

5.9

2.7

1.0

2.6

1.2

4.5

2.3

1.0

2.3

1.0

2.3

1.5

0.7

2.2

1.0

2.3

1.0

page 3

advertisement

Related manuals

Download PDF

advertisement