Advertisement
Advertisement
FIAT
TERRAZZO
12" MOP SERVICE BASIN
WITH 6" CURVED DROP FRONT
TERRAZZO
MOP SERVICE BASIN - CURVED FRONT
12" DEPTH WITH 6" CURVED DROP FRONT
• One piece, precast terrazzo made of black and white marble chips in gray portland cement to produce a compressive strength not less than
3000 P.S.I. seven days after casting.
• Terrazzo surface shall be ground and polished with all air holes or pits grouted and excess removed.
• Shoulders shall be not less than 12" high outside and 10" inside at lowest wall. Shoulder width not less than 1-1/2" on all sides with a 1/4" pitch towards the inside.
• Standard drain body is stainless steel cast integrally and provides for a caulked lead connection not less than 1" deep to a 3" pipe.
• Stainless steel strainer # 1453BB
Options
• QDC quick drain connectors
• Integral galvanized tiling fl anges available at no additional charge.
• Stainless steel tiling fl anges available with up-charge. Must be custom order.
• Chrome plated brass drain or Vandal proof drain.
Must be custom order.
• Stainless steel caps available with up-charge.
Must be custom order.
❏
TSBCR1000 Series with plain curbs only
❏
TSBCR1100 Series with stainless steel cap on threshold only
Shown: TSBCR1000
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
NOTES: Terrazzo Mop Basins must be installed on a
1/2" layer of mortar in order that the mop basin be level and to prevent cracking. Failure to install terrazzo without a mortar bed will void the warranty. Installations require a 1⁄4" clearance between mop basin and wall.
CERTIFICATIONS:
Optional Components:
❏
830AA Mop Service Basin Fitting
❏
832AA Hose & Hose Bracket
❏
1239BB Aluminum Bumperguard with
Vinyl Insert
❏
833AA Silicone Sealant
❏
MSG Wall Guards - Stainless Steel stainless steel and help protect walls adjacent to
Mop Basin. Two panels are required for corner installations. Optional third panel is required for a recessed installation. (MSG2424; MSG2828;
MSG3232; MSG3624; MSG3636)
Customer Service Canada
1-800-387-0369 www.fiat.ca
© 2012 Fiat Products
1
Customer Service United States
1-800-442-1902 www.fiatproducts.com
Revised 8/12
FIAT
B
TERRAZZO
MOP SERVICE BASIN - CURVED FRONT
12" DEPTH WITH 6" CURVED DROP FRONT
D
A
C
E
F
28-1/2"
(724mm)
30-1/2"
(775mm)
TSBCR1000 Series With Plain Curbs Only
MODEL
TSBCR1000
SIZE
28" x 28" x 12"
A
28
B
28
C
12
D
12
E
44
F
28-1/2
1-1/2"
(38mm)
6"
(152mm)
1-1/2"
(38mm)
5/8"
(16mm)
1-1/2"
(38mm)
12"
(305mm)
2" (51mm)
SECTION THRU
THRESHOLD
SECTION THRU
DRAIN
(LEAD CAULK &
3" PIPE “P” TRAP
BY OTHERS)
SECTION THRU
SIDES
TSBCR-1100 Series
With Stainless Steel Cap On Threshold Only
MODEL
TSBCR1100
SIZE
28" x 28" x 12"
A
28
B
28
C
12
D
12
E
44
F
28-1/2
F
1-1/2"
(38mm)
12"
(305mm)
45˚
ST/STL CAP
6"
(155mm)
2"
(51mm) D
6"
(152 mm)
ST/ST CAP DETAIL WITH 6" CURB DROP FRONT
THRESHOLD DETAIL
IMPORTANT: Roughing in dimensions may vary 1/2" and are subject to change or cancellation without prior notice.
Customer Service Canada
1-800-387-0369 www.fiat.ca
© 2012 Fiat Products
2
Customer Service United States
1-800-442-1902 www.fiatproducts.com
Revised 8/12

Public link updated
The public link to your chat has been updated.
Advertisement