BrassCraft WB234-12N Copper-Flex™ 3/4 x 3/4 x 12 in. FIP x MIP Nominal Flexible Water Connector Specification

Add to My manuals
4 Pages

advertisement

BrassCraft WB234-12N Copper-Flex™ 3/4 x 3/4 x 12 in. FIP x MIP Nominal Flexible Water Connector Specification | Manualzz

COPPER-FLEX

Copper Water Heater Connectors

Corrosion

is

No Match

for

COPPER-FLEX

Patented Galvanic and

Electrolytic Corrosion

Protection.

• Patented internal dielectric insulator sleeve

provides superior resistance to galvanic and

electrolytic corrosion

• Insulator sleeve effectively isolates dissimilar

metals within the water way to eliminate the

need for a dielectric union (plastic lined nipple).

The Preferred Seal

• Pliable Nitrile rubber washer requires less torque

to seal and is more resilient to rough nipple

surfaces.

• Longer connector nuts provide more thread-

to-thread contact and a better seal to lined nipples

• Manufactured with solid brass nuts

Listed to ASME A112.18.6/CSA B125.6

• Available in a variety of approved

configurations to fit most plumbing

system connections

California (AB1953) and Vermont (S152)

Internal Dielectric

Sleeve

Nitrile Rubber

Washer

COPPER-FLEX

Copper Water Heater Connectors

7/8 IN. O.D. TUBE

Part No.*

WB00-N

WB03-N

WB034-N

WB134-N

WB234-N

WB20-N

WB23-N

Description

3/4" F.I.P. X 3/4" F.I.P.

3/4" F.I.P. X 3/4" Nom. Male Sweat

(7/8” O.D.)

3/4" F.I.P. X 3/4" Nom. Male/Female

Sweat (7/8” I.D.)

1" F.I.P. x 3/4" Nom. Male/Female Sweat

3/4" M.I.P./F.I.P. x 3/4" Nom. Male/Female Sweat

(7/8" I.D.)

3/4" M.I.P./F.I.P. x 3/4" F.I.P.

3/4" M.I.P./F.I.P. x 3/4" Nom. Male Sweat (7/8"

O.D.)

19

19

13

19

Nominal Length/Carton Wt (Lbs)

12" 15" 18" 24"

13 15 18 21

13 15 18 21

21

21

15

21

22

22

18

18

22

27

27

21

21

27

A Perfect Fit to PEX Quickly and easily connects directly to PEX pipe.

WB07 3/4" F.I.P. x 3/4" PEX Brass Barb — — 22

WB27 3/4" M.I.P./F.I.P. x 3/4" PEX Brass Barb — — 22

27

27

*To order, add length to part number (e.g. WB00-18N or WB07-18) Carton Qty: 25

WARNING: For use with water in readily accessible locations only. DO NOT use with gas – gas will cause corrosion and leakage.

COPPER-FLEX

Adaptors

Part No.

Description

WRU-12-12

3/4-14 Straight Male Pipe Thread x 3/4" M.I.P. Hex

Nipple. Brass . Use to Adapt 3/4" F.I.P. Nut to 3/4" M.I.P. on Water Heater Connection.

Carton Qty

25

Carton Wt (Lbs)

4

PRB-12-8

3/4-14 Straight Male Pipe Thread x 1/2" F.I.P.

Bushing. Brass .

25 1

WRU-12PX

WRJ

DIS

3/4-14 Straight Male Pipe Thread x 3/4" PEX Barb

Adaptor. Brass .

1.020” O.D. x .687” I.D. x .240”

Thick Rubber Washer. For Copper Water

Heater Connectors (new style) manufactured after 1990

.940” X .675” I.D. x .218” Thick Rubber Washer. For

Copper Water Heater Connectors (old style) manufactured before 1990

25

25

5

3

1

1

Scan for direct access to

BrassCraft

Water Heater

Connectors

©1998-2011 Brass-Craft Mfg.

Brass-Craft Manufacturing Co.

39600 Orchard Hill Place

Novi, Michigan 48375-5331

TOLL-FREE: (877) 272-7755

FAX: (248) 305-6011 www.brasscraft.com

350 South Edgeware Road

St.Thomas, Ontario Canada N4P 4C4

TOLL-FREE: (800) 265-4322

FAX: (800) 567-9100

0626 Rev. 3/11

For Residential and Commercial Applications

Job   Name               Engineer   /   Architect          

Job   Location               Wholesaler          

Submittal   Date               Contractor          

WB034/134/234 7/8” OD Copper Water Heater Connectors

Use: For use in exposed locations only to connect water heaters and other water connected devices to the water supply

Design Features:

 Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion

No dielectric union needed with installation. Dielectric is built-in to the design of the connector

Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces

Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal

100% compliant to California, Vermont and Maryland “low-lead” requirements

Operating Specifications:

Temperature: 40 ° to 180 ° F (NSF61 maximum 82 ° C)

Pressure: water pressures up to 125 psi maximum

Tubing

Dielectric

Sleeve

Nuts

End Fittings

Washers

Part Listing:

WB034-12N

WB034-15N

WB034-18N

WB034-24N

WB134-18N

WB134-24N

MATERIAL SPECIFICATIONS

C12200 copper

Polypropylene

C36000 brass

C36000 brass

Nitrile rubber

7/8” OD X 12” connector with 3/4” FIP fitting x 3/4” Nom. Male/Female Sweat (7/8” ID)

7/8” OD X 15” connector with 3/4” FIP fitting x 3/4” Nom. Male/Female Sweat (7/8” ID)

7/8” OD X 18” connector with 3/4” FIP fitting x 3/4” Nom. Male/Female Sweat (7/8” ID)

7/8” OD X 24” connector with 3/4” FIP fitting x 3/4” Nom. Male/Female Sweat (7/8” ID)

7/8” OD X 18” connector with 1” FIP fitting x 3/4” Nom. Male/Female Sweat (7/8” ID)

7/8” OD X 24” connector with 1” FIP fitting x 3/4” Nom. Male/Female Sweat (7/8” ID)

This specification and all information contained herein is the confidential and exclusive property of

BrassCraft Manufacturing, and shall not be disclosed to others without the written consent of BrassCraft.

This specification must be returned to BrassCraft if requested.

300.22 W034/134/234 Copper Water Heater Connectors REV 12/10



2010 Brass-Craft Mfg.

WB034/134/234 7/8” OD Copper Water Heater Connectors

Part Listing:

WB234-12N

WB234-15N

WB234-18N

WB234-24N

Model

WB034

WB134

WB234

7/8” OD X 12” connector with 3/4” MIP/FIP fitting x 3/4” Nom. Male/Female Sweat (7/8” ID)

7/8” OD X 15” connector with 3/4” MIP/FIP fitting x 3/4” Nom. Male/Female Sweat (7/8” ID)

7/8” OD X 18” connector with 3/4” MIP/FIP fitting x 3/4” Nom. Male/Female Sweat (7/8” ID)

7/8” OD X 24” connector with 3/4” MIP/FIP fitting x 3/4” Nom. Male/Female Sweat (7/8” ID)

WB234

Series

WB034 / WB134

/134//Series

PART DIMENSIONS ( Inches )

Connector Length ( ±.31)

Dim. 12” 15” 18” 24”

A 12.31 15.31 18.31 24.31

A ----- ----- 18.31 24.31

A 13.05 16.05 19.05 25.05

A

A

Listings & Certifications:

IAPMO listed to ASME A112.18.6 and CSA B125 (File # 0452)

CSA listed to CSA B125 (File # 204593)

CSA approved to California Health & Safety Code 116875, Vermont Bill S.152 and Maryland House Bill 372 (Project # 2174785)

This specification and all information contained herein is the confidential and exclusive property of

BrassCraft Manufacturing, and shall not be disclosed to others without the written consent of BrassCraft.

This specification must be returned to BrassCraft if requested.

300.22 W034/134/234 Copper Water Heater Connectors REV 12/10



2010 Brass-Craft Mfg.

advertisement

Related manuals

Download PDF

advertisement