advertisement
User Manual
Edition Notes
Edition Notes
The Q-Spot™ 360-LED User Manual Rev. 6 covers the description, safety precautions, installation, programming, operation, and maintenance of the Q-Spot™ 360-LED.
CHAUVET® released this edition of the Q-Spot™ 360-LED User Manual in July 2014.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the Chauvet name and the dotted triangle, and all other trademarks on this manual pertaining to services, products, or marketing statements (example: It’s Green Thinking™) are owned or licensed by
CHAUVET®. Any other product names, logos, brands, company names, and other trademarks featured or referred to within this document are the property of their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this user manual in its entirety, including but not limited to pictures, logos, trademarks, and resources.
© Copyright 2014 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Usage
CHAUVET® authorizes its customers to download and print this manual for professional information purposes only. CHAUVET® expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without its written consent.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 inches), double sided. If using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all respects. However, CHAUVET® assumes no responsibility for any error or omissions in this document. CHAUVET® reserves the right to revise this document and to make changes from time to time in the content hereof without obligation of CHAUVET® to notify any person or company of such revision or changes. This does not constitute in any way a commitment by CHAUVET® to make such changes. CHAUVET® may issue a revision of this manual or a new edition of it to incorporate such changes.
Document Revision
The Q-Spot™ 360-LED User Manual, Rev. 6, supersedes all previous versions of this manual. Replace any older versions of this manual with this version.
Author
D. Couppe
Date
7/16/14
Editor
A. Leon
Date
7/16/14 ii Q-Spot™ 360-LED User Manual Rev. 6
Table of Contents
Table of Contents
Q-Spot™ 360-LED User Manual Rev. 6 -iii-
Table of Contents
Returns .......................................................................................................................................................................... 22
6. Technical Specifications ......................................................................................................................... 23
Contact Us ..................................................................................................................................................................... 24 iv Q-Spot™ 360-LED User Manual Rev. 6
Before You Begin
1. Before You Begin
What Is Included
· Q-Spot™ 360-LED
· 2 Omega brackets with mounting hardware
· Warranty Card
· Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, not CHAUVET®.
Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Manual Conventions
Convention Meaning
1~512
50/60
A range of values in the text
A set of mutually exclusive values in the text
<SET>
Settings
A button on the product’s control panel
A product function or a menu option
MENU>Settings A sequence of menu options
1~10
Yes/No
ON
A range of menu values from which to choose in a menu
A set of two mutually exclusive menu options in a menu
A unique value to be entered or selected in a menu
Symbols
Symbols Meaning
Critical installation, configuration, or operation information.
Failure to comply with this information may cause the product not to work, damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.
Q-Spot™ 360-LED User Manual Rev. 6 1
Before You Begin
Product at a Glance
Safety Notes
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Master/Slave x
Auto Programs x Auto-Ranging Power
Supply
P
Replaceable Fuse
P
User Serviceable
P
Duty Cycle
P
P
P x x
Please read the following Safety Notes carefully before starting to work with the product.
These notes provide important safety information about the installation, usage, and maintenance.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained CHAUVET®-certified technicians.
Do not open the housing or attempt any repairs.
Please refer to all applicable local codes and regulations for the proper installation of the product.
Personal Safety
· Avoid direct eye exposure to the light source while the product is on.
· Always disconnect this product from its power source before servicing.
· Always connect this product to a grounded circuit to avoid the risk of electrocution.
· Do not touch this product’s housing during operation because it may be very hot.
Mounting and Rigging
· This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to rain or moisture.
· Make sure there are no flammable materials close to this product while it is operating.
· When hanging this product, always secure to a fastening device using a safety cable
(not included).
· Always carry this product by the handles. Do not carry from the head.
Power and Wiring
· Always make sure you are connecting this product to the proper voltage in accordance with the specifications in this manual or on the product’s specification label.
· Never connect this product to a dimmer pack or rheostat.
· Never disconnect this product by pulling or tugging on the power cable.
Operation
· Do not operate this product if you see damage on the housing, lenses, or cables.
Have the damaged parts replaced by an authorized technician at once.
· Do not cover the ventilation slots when operating to avoid internal overheating.
· Do not aim this product toward the Sun. The lenses could concentrate the solar energy and cause internal overheating.
· The maximum ambient temperature is 104° F (40° C). Do not operate this product at a higher temperature.
· In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
Expected LED Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal, single-LED conditions. For this reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this lifespan can be 40,000 to
50,000 hours. If extending this lifespan is vital, lower the operating temperature by improving the ventilation around the product and reducing the ambient temperature to an optimal operating range. In addition, limiting the overall projection intensity may also help to extend the LEDs’ lifespan.
2 Q-Spot™ 360-LED User Manual Rev. 6
Introduction
2. Introduction
Product
Description
Features
The Q-Spot™ 360-LED is a high-power, moving-yoke product equipped with 3 10-watt white
LEDs. This product includes a color wheel with 7 colors, plus white, and 2 gobo wheels. Gobo wheel #1 has 8 fixed gobos plus open. Gobo wheel #2 has 7 rotating slot-n-lock gobos plus open. In addition, the Q-Spot™ 360-LED includes remote focus and a rotating 3-facet prism.
· Patented optical and lens path for superior output
· Crisp focus provides stunning gobo images
· Lightweight and easy to hang
· Quiet operation for the most discerning of installations
· DMX channels: 11 or 14
· Pan: 540°
· Tilt: 270°
· Colors wheel:
· 7 colors plus white
· Continuous scroll at variable speeds
· Gobo wheel (static):
· 8 gobos,
· Continuous scroll at variable speeds
· Gobo wheel (rotating):
· 7 gobos
· Interchangeable
· Slot-n-lock
· Continuous scroll at variable speed
· 3-facet rotating prism
· Variable electronic dimmer (0~100%)
· Remote fixture reset
· Move-in-black for pan/tilt
· Built-in automated programs
· Built-in sound-activated programs
· 255 user-programmable steps without DMX controller
· High-powered, 3 (10 W) LEDs
· User-selectable pan/tilt ranges
· Automatic pan/tilt correction
· Reset to factory settings option
· User-selectable basic or advanced operating modes
· Easy access door for gobo change
Q-Spot™ 360-LED User Manual Rev. 6 3
4
Introduction
Product Overview
Omega
Brackets
DMX
In/Out
Gobo
Access
Panel
Control
Panel
Handles
Power In
Q-Spot™ 360-LED User Manual Rev. 6
Product Dimensions
Q-Spot™ 360-LED User Manual Rev. 6
Introduction
5
6
Setup
3. Setup
AC Power
Each Q-Spot™ 360-LED has an auto-ranging power supply that works with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the power requirements for each Q-Spot™ 360-LED, refer to the label affixed to the product. You can also refer to
the Technical Specifications .
The listed current rating indicates the maximum current draw during normal operation.
For more information, you may download Sizing Circuit Breakers from the CHAUVET® website: www.chauvetpro.com
.
Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Q-Spot™ 360-LED comes with a power input cord terminated with an IEC connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with your product has no plug or you need to change the Edison plug, use the table below to wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live
AC Neutral
AC Ground
Black
White
Green/Yellow
Brown
Blue
Green/Yellow
Yellow or Brass
Silver
Green
Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace with a fuse of the same type and rating.
Fuse Replacement
1. Disconnect the product from power.
2. Using a flat-head screwdriver, wedge the tip into the slot of the fuse holder.
3. Pry the safety cap out of the housing to pull out the installed fuse.
4. Remove the blown fuse from the safety cap and replace with a fuse of the exact same type and rating (T 3.15 A, 250 V).
5. Insert the fuse holder back in place and reconnect the power.
Spare fuse
(inside safety cap)
Installed fuse
(held by plastic clip)
Safety cap
Q-Spot™ 360-LED User Manual Rev. 6
Setup
DMX Linking
You can link the Q-Spot™ 360-LED to a DMX controller using a standard DMX serial connection. If using other DMX compatible products with the Q-Spot™ 360-LED, you can control each individually with a single DMX controller.
DMX Modes
The Q-Spot™ 360-LED uses the standard DMX data connection for the 11 and 14 channel DMX modes.
Introduction for a brief description of these modes.
Operation to learn how to configure the Q-Spot™ 360-LED to work in these
modes.
DMX Values section will provide you with detailed information regarding the DMX
modes.
Master/Slave
Connectivity
The Master/Slave mode allows a Q-Spot™ 360-LED (the “master product”) to control one or more Q-Spot™ 360-LEDs (the “slave products”) without a DMX controller. One
Q-Spot™ 360-LED becomes the master product when running an Auto or Custom program.
You must configure each slave product’s control panel to operate in SLAVE mode.
During Master/Slave operation, the slave products will operate in unison with the master product.
DO NOT connect a DMX controller to products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master product.
The Operation chapter of this manual provides detailed instructions on how to
configure the Master and Slave products.
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the CHAUVET® website: www.chauvetpro.com.
Color Wheel
The Q-Spot™ 360-LED includes one color wheel with 7 fixed colors. The diagram shows the color on the wheel, as per the DMX Values tables.
Q-Spot™ 360-LED User Manual Rev. 6 7
Setup
Gobo Wheels
The Q-Spot™ 360-LED includes two gobo wheels. Gobo wheel #1 has 8 fixed gobos, while gobo wheel #2 has 7 rotating gobos. The diagrams show each wheel, as per the
Gobo Wheel 1 Gobo Wheel 2
25.8 mm
Gobo Dimensions
Gobo Wheel 2
The gobos on Gobo Wheel 1 are not removeable.
8 Q-Spot™ 360-LED User Manual Rev. 6
Setup
Gobo Replacement
1. Turn the product off and disconnect from power.
2. Unlock the gobo cover and slide it away.
3. Separate the gobo plate away from the gobo wheel by pushing it toward the front of the moving head (direction 1 in the diagram). Be careful not to push the gobo out of the gobo plate.
4. Extract the gobo plate by pulling it outward (direction 2 in the diagram).
5. On a flat surface, remove the expansion ring that holds the gobo in place and remove the gobo from the gobo plate.
6. Insert a new gobo and hold it in place with the expansion ring.
7. Slide the tip of the gobo plate under the pressure plate near the center of the gobo wheel.
8. Push the gobo plate inwards. DO NOT force the gobo plate into the gobo wheel slot.
If correctly installed, the gobo plate should easily snap itself into the gobo wheel slot.
Gobo Plate #1 contains a magnet used by the product for positioning purposes.
When replacing gobos, be sure to return gobo plate #1 to position #1 on the wheel.
Q-Spot™ 360-LED User Manual Rev. 6 9
Setup
Mounting
Before mounting this product, read and follow the Safety Notes .
Orientation
Always mount this product in a safe position and make sure there is adequate room for ventilation, configuration, and maintenance.
Rigging
CHAUVET® recommends using the following general guidelines when mounting this product.
· When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in
· Never mount in places where rain, high humidity, extreme temperature changes, or restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the
product’s weight. Refer to the Technical Specifications for the weight-bearing
requirements of this product.
· When hanging this product, always secure to a fastening device using a safety cable
(not included).
The Q-Spot™ 360-LED comes with an already installed mounting hardware to which you will be able to attach the 2 included omega brackets. Use 2 mounting points per product.
In addition, use a safety cable (not included) to link the product to the structure.
Product Mounting Diagram
Overhead Mounting
Floor Mounting
10 Q-Spot™ 360-LED User Manual Rev. 6
Operation
4. Operation
Control Panel
Description
Button
<MENU>
<ENTER>
<UP>
Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value in to the current function
Navigates upward through the menu list and increases the numeric value when in a function
<DOWN> Navigates downward through the menu list and decreases the numeric value when in a function
Control Options
You can set the Q-Spot™ 360-LED start address in the 001~512 DMX range. This allows for the control of up to 36 products in the 14-channel PERSON1 mode. The
Q-Spot™ 360-LED works with any compatible DMX controller using standard
DMX cables.
Programming
Carry out all the programming procedures indicated below from the control panel. Refer
to the Menu Map page to learn how the menu options relate to each other.
Navigation Buttons
· To go to an option in the Menu Level, press <MENU> repeatedly until the option shows on the display. Press <ENTER> to select. This will take you to the first programming level for that option.
· To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. If there is another programming level, you will see the next option or you will see the selected value.
· To exit to the previous menu level, press <MENU>.
DMX Address
1. Select ADDRESS.
2. To change the current address, press <ENTER>. a. Change the starting address (001~512). b. Press <ENTER>.
DMX Mode 1. Select PERSON.
2. To change the current mode, press <ENTER>. a. Select a DMX mode (PERSON1/PERSON2). b. Press <ENTER>.
Q-Spot™ 360-LED User Manual Rev. 6 11
Operation
Product Settings
Pan/Tilt Speed
1. Select SETTINGS > PERFORM > PT SPEED. a. Select FAST for fast movement or SLOW to use the normal speed. b. Press <ENTER>.
Reverse Pan Direction
1. Select SETTINGS > PERFORM > PAN INV.
2. To reverse the pan direction, press <ENTER>. a. Select INVERT to reverse the pan direction or NORM to use the normal pan direction. b. Press <ENTER>.
Reverse Tilt Direction 1. Select SETTINGS > PERFORM > TILT INV.
2. To reverse the tilt direction, press <ENTER>. a. Select INVERT to reverse the tilt direction or NORM to use the normal tilt direction. b. Press <ENTER>.
Reverse Dimmer Direction
1. Select SETTINGS > PERFORM > DIM INV.
2. To reverse the dimmer direction, press <ENTER>. a. Select INVERT to reverse the dimmer direction or NORM to use the normal dimmer direction. b. Press <ENTER>.
Optics Speed
3. Select SETTINGS > PERFORM > OP SPEED. a. Select FAST for fast movement or SLOW to use the normal speed. b. Press <ENTER>.
Head Motion Blackout
1. Select SETTINGS > PERFORM > BLACK D.
2. To black out the output when the head moves, press <ENTER>. a. Select INSTANT to black out the output when the head tilts or pans, or
DELAY to keep the output on while the head moves. b. Press <ENTER>.
Dimmer Curve 1. Select SETTINGS > PERFORM > DIMMER.
2. To set the dimming curve, press <ENTER>. a. Select DIM4 (slowest) to DIM1 (Fastest) or OFF (linear). b. Accept the selected option.
Loss Of Signal 1. Select SETTINGS > PERFORM > DMXERROR.
2. To choose what happens to the product when signal is lost, press <ENTER>. a. Select BLACK to blackout the output during signal loss or SAVE to keep the last output when the signal was lost. b. Press <ENTER>.
Product Reset 1. Select SETTINGS > PERFORM > DMXRESET.
2. To choose whether to reset the product from the control panel or the DMX controller, press <ENTER>. a. Select DMX to reset the product from a DMX controller or DISPLAY to reset the product from the control panel. b. Press <ENTER>.
Display Backlight
1. Select SETTINGS > PERFORM > DISPLAY.
2. To choose how long the backlight stays on after the last action is performed on the control panel, press <ENTER>. a. Select LONG, SHORT, or ALWAYS. b. Press <ENTER>.
12 Q-Spot™ 360-LED User Manual Rev. 6
Operation
Lockout 1. Select SETTINGS > PERFORM > KEY LOCK.
2. To choose activate the password function on the control panel, press <ENTER>. a. Select YES or NO. b. Press <ENTER>.
Homepage Setting 1. Select SETTINGS > PERFORM > HOMEPAGE.
2. To choose what to show on the home screen on the control panel, press <ENTER>. a. Select DMX, to show only the DMX Channel or NAME+DMX to display what is programmed via the CONTENT level. b. Press <ENTER>.
Limit Pan/Tilt Range
1. Select SETTINGS > RANGE.
2. To set the start and end points of the pan and tilt ranges, press <ENTER>. a. Select P.START and set the pan starting point between 000~255. b. Press <ENTER>. c. Select P.END and set the pan ending point between 000~255. d. Press <ENTER>. e. Select T.START and set the tilt starting point between 000~255. f. Press <ENTER>. g. Select T.END and set the tilt ending point between 000~255. h. Press <ENTER>.
Product Defaulting
1. Select SETTINGS > DEFAULT.
2. To reset the product to original factory settings, press <ENTER>. a. Select YES or NO. b. Press <ENTER>.
Program Send 1. Select SETTINGS > SEND.
2. To send all settings in the Q-Spot™ 360 LED to other Q-Spot™ 360 LED products connected via Master/Slave, press <ENTER>. a. Select YES or NO. b. Press <ENTER>.
Run Mode Settings
Run Mode 1. Select RUNMODE > RUN.
2. To enable DMX mode: a. Select DMX512, press <ENTER>.
3. To enable Auto modes: a. Select AUTO1 or AUTO2, press <ENTER>.
4. To enable Sound-Active modes: a. Select SOUND1 or SOUND2, press <ENTER>.
5. To enable Custom Program mode: a. Select CUSTOM, press <ENTER>.
6. To enable Testing mode: a. Select TEST, press <ENTER>.
7. To assign the product to Slave mode: a. Select SLAVE, press <ENTER>.
Q-Spot™ 360-LED User Manual Rev. 6 13
Operation
Custom Programming 1. Select RUNMODE > EDIT > STEP.
2. Select 01~49, press <ENTER>. a. Select PAN, press <ENTER>. i. Set 000~255 to assign the Pan position. b. Select TILT, press <ENTER>. i. Set 000~255 to assign the Tilt position. c. Select COLOR, press <ENTER>. i. Set 000~255 to assign the Color Wheel value. d. Select GOBO1, press <ENTER>. i. Set 000~255 to assign the Gobo 1 Wheel value. e. Select GOBO2, press <ENTER>. i. Set 000~255 to assign the Gobo 2 Wheel value. f. Select GOBO2ROT, press <ENTER>. i. Set 000~255 to assign the Gobo 2 Rotation value. g. Select PRI&ROT, press <ENTER>. i. Set 000~255 to assign the Prism value. h. Select FOCUS, press <ENTER>. i. Set 000~255 to assign the Focus position. i. Select DIMMER, press <ENTER>. i. Set 000~255 to assign the Dimmer value. j. Select STROBE, press <ENTER>. i. Set 000~255 to assign the Strobe value. k. Select TIME, press <ENTER>. i. Set 000~255 to assign the Step duration. l. Select USE, press <ENTER>. i. Select YES to save the settings, NO to discard them.
Program Send
1. Select RUNMODE > SEND.
2. To send Run mode settings in the Q-Spot™ 360 LED to other Q-Spot™ 360 LED products connected via Master/Slave, press <ENTER>. a. Select YES or NO. b. Press <ENTER>.
Manual Settings
Reset Custom Settings 1. Select MANUAL > RESET.
2. To reset the custom, press <ENTER>. a. Select YES to turn the LCD around or NO to keep the normal LCD view. b. Accept the selected option.
14 Q-Spot™ 360-LED User Manual Rev. 6
Operation
Manual Control 1. Select MANUAL > DMXvalue. a. Select PAN, press <ENTER>. i. Set 000~255 to assign the Pan position. b. Select TILT, press <ENTER>. i. Set 000~255 to assign the Tilt position. c. Select COLOR, press <ENTER>. i. Set 000~255 to assign the Color Wheel value. d. Select GOBO1, press <ENTER>. i. Set 000~255 to assign the Gobo 1 Wheel value. e. Select GOBO2, press <ENTER>. i. Set 000~255 to assign the Gobo 2 Wheel value. f. Select GOBO2ROT, press <ENTER>. i. Set 000~255 to assign the Gobo 2 Rotation value. g. Select PRI&ROT, press <ENTER>. i. Set 000~255 to assign the Prism value. h. Select FOCUS, press <ENTER>. i. Set 000~255 to assign the Focus position. i. Select DIMMER, press <ENTER>. i. Set 000~255 to assign the Dimmer value. j. Select STROBE, press <ENTER>. i. Set 000~255 to assign the Strobe value.
Service Menu
Settings Menu Lock-Out 1. Select SERVICE > ACCESS > SETTLOCK.
2. To set the Settings Menu level lock-out, press <ENTER>. a. Select YES to enable or NO to disable. b. Press <ENTER>.
Service Menu Lock-Out
1. Select SERVICE > ACCESS > SERVLOCK.
2. To set the Service Menu level lock-out, press <ENTER>. a. Select YES to enable or NO to disable. b. Press <ENTER>.
Software Version
1. Select SERVICE > INFO > VERSION. a. Press <ENTER>.
Home Screen
1. Select SERVICE > CONTENT > DISPLAY1.
2. Use the <UP> and <DOWN> keys to select the first of 8 characters to show on the home screen, press <ENTER>.
Content Send
1. Select SERVICE > CONTENT > SEND.
2. To send Content mode settings in the Q-Spot™ 360 LED to other Q-Spot™ 360
LED products connected via Master/Slave, press <ENTER>. a. Select YES or NO. b. Press <ENTER>.
Q-Spot™ 360-LED User Manual Rev. 6 15
Operation
Menu Map
Main Level
ADDRESS
PERSON
SETTINGS
RANGE
Programming Levels
001~512
PERSON 1
PERSON 2
PERFORM
DEFAULT
SEND
PT SPEED
PAN INV
TILT INV
OP SPEED
BLACK D
DIMMER
DIM INV
DMXERROR
DMXRESET
DISPLAY
KEY LOCK
HOMEPAGE
P.START
P.END
T.START
T.END
Description
Selects a starting DMX address
Selects the 14-channel DMX mode
Selects the 11-channel DMX mode
FAST
SLOW
NORM
INVERT
NORM
INVERT
FAST
SLOW
Defines the pan/tilt speed
Defines the direction of pan function
Defines the direction of tilt function
Defines the optics speed
INSTANT
DELAY
DIM4
DIM3
Defines the move-in black delay
DIM2
DIM1
OFF
NORM
Slow (DIM4) to fast (DIM1) dimmer curves
Linear dimmer
Defines the direction of the dimmer function
INVERT
SAVE Save the last look when DMX signal is lost
BLACK All LEDs off when DMX signal is lost
DMX The DMX controller can reset the fixture
DISPLAY The control panel can reset the fixture
LONG
SHORT
Defines the amount of time the display backlight is on
ALWAYS
YES
NO
Activates the control panel password
DMX
NAME+DMX
Sets the display to show only the DMX channel when idle
Display what is programmed via CONTENT level when idle
Sets the pan start point (restricted range)
000~255
Sets the pan end point (restricted range)
Sets the tilt start point (restricted range)
Sets the tilt end point (restricted range)
NO
YES
YES
NO
Sets unit back to default factory settings
Sends all settings of this product to all other
Q-Spot™ 360 LED products connected via master/slave
16 Q-Spot™ 360-LED User Manual Rev. 6
Operation
Menu Map (cont.)
Main Level
RUNMODE
MANUAL
SERVICE
Programming Levels
RUN
EDIT STEP 01~49
DMX512
AUTO1
AUTO2
SOUND1
SOUND2
CUSTOM
TEST
SLAVE
PAN
TILT
COLOR
GOBO1
GOBO2
GOBO2ROT
PRI&ROT
FOCUS
DIMMER
STROBE
TIME
000~
255
USE
YES
NO
NO
SEND
RESET
DMXvalue
ACCESS
INFO
YES
NO
YES
PAN
TILT
COLOR
GOBO1
GOBO2
GOBO2ROT
PRI&ROT
000~255
FOCUS
DIMMER
STROBE
OFF
SETTLOCK
ON
OFF
SERVLOCK
ON
VERSION
CONTENT
DISPLAY1
SEND
********
NO
YES
Description
Selects DMX512-A running mode
Selects the first automatic program
Selects the second automatic program
Selects the first sound-activated program
Selects the second sound program
Selects the user-customizable program
Selects the fixture’s test sequence
Selects the Slave running mode
Selects the pan position
Selects the tilt position
Selects the color (color wheel)
Selects a fixed gobo (static or shake)
Selects a rotating gobo (static or shake)
Selects the gobo rotation mode
Selects the prism rotation mode
Selects a focus point
Selects the dimmer value
Selects the strobe value
Selects the step duration
Activates the changes
Sends RUNMODE settings of this product to all other Q-Spot™ 360 LED products connected via master/slave
Resets the product’s custom settings
Selects the pan position
Selects the tilt position
Selects the color (color wheel)
Selects a fixed gobo (static or shake)
Selects a rotating gobo (static or shake)
Selects the gobo rotation mode
Selects the prism rotation mode
Selects a focus point
Selects the dimmer value
Selects the strobe value
Activates/deactivates the SETTINGS main level passcode
Activates/deactivates the SERVICE main level passcode
Shows the version of the installed software
Allows 8 characters of text to be displayed on the control panel
Sends CONTENT settings of this product to all other Q-Spot™ 360 LED products connected via master/slave
Q-Spot™ 360-LED User Manual Rev. 6 17
18
Operation
DMX Values
Person 1 Channel
1
2
3
4
5
Function
Pan
Pan Fine
Tilt
Tilt Fine
Pan/Tilt Speed
6 Color Wheel
7 Gobo Wheel 1
8 Gobo Wheel 2
Value Percent/Setting
000
ó 255 0~540°
000 ó 255 Fine pan control 0~3°
000
ó 255 0~270°
000 ó 255 Fine tilt control 0~3°
000
ó 010
011 ó 020
021
ó 030
031 ó 040
041
ó 050
051 ó 060
061
ó 070
071 ó 080
081
ó 095
096 ó 110
111 ó 125
126 ó 140
141 ó 155
156
ó 170
171 ó 185
186
ó 255
000 ó 010
011
ó 020
021 ó 030
031
ó 040
041 ó 050
051
ó 060
061 ó 070
071 ó 080
081 ó 090
091
ó 105
106 ó 120
121
ó 135
136
ó 150
151 ó 165
166
ó 180
181 ó 195
196
ó 210
211 ó 255
000 ó 255 Fast to Slow
000
ó 009
010 ó 019
020
ó 029
030 ó 039
040
ó 049
050 ó 059
060
ó 069
070 ó 079
080 ó 099
100 ó 119
120 ó 139
140 ó 159
160 ó 179
180
ó 199
200 ó 219
220
ó 255
No Function
Red
Green
Yellow
Blue
Orange
Magenta
Light Blue
Light Blue/Magenta
Magenta/Orange
Orange/Blue
Blue/Yellow
Yellow/Green
Green/Red
Red/Open
Rainbow or Linear Effect
No gobo
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Shaking gobo 8
Shaking gobo 7
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Flow effect
No gobo
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Shaking gobo 7
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Flow effect
Q-Spot™ 360-LED User Manual Rev. 6
DMX Values (cont.)
Person 1 Channel
9
10
11
12
13
14
Gobo Wheel 2 Rotation
Prism Rotation
Focus
Dimmer
Strobe
Function
Control
Value Percent/Setting
000
ó 060
061 ó 150
151
ó 165
166 ó 255
000
005 ó 009
010
ó 127
128
133
ó 004
ó 132
ó 255
360° Indexing
Clockwise Rotation ~ Slow to Fast
No Function
Counter-Clockwise Rotation ~ Slow to Fast
No Function
No Rotation
Counter-clockwise rotation ~ Slow to Fast
No Rotation
Clockwise rotate ~ Slow to Fast
000
ó 255 0~100%
000 ó 255 0~100%
000
ó 031
032 ó 063
064
ó 095
096 ó 127
128
ó 159
160 ó 191
192
ó 223
224 ó 255
Close
Open
Strobe 0~20Hz
Open
Pulse Effect
Open
Random Effect
Open
000 ó 019
020
ó 039
040 ó 059
060
ó 139
140 ó 149
150
ó 159
160 ó 169
170
ó 179
180 ó 189
190
ó 199
200 ó 219
220
ó 235
236 ó 239
240
ó 243
244 ó 247
248 ó 251
252 ó 255
No function
Pan/tilt black activation
Pan/tilt black deactivation
No function
Auto program 1 (3 sec activation delay)
Auto program 2 (3 sec activation delay)
Test (3 sec activation delay)
Custom program (3 sec activation delay)
Sound 1
Sound 2
Reset (3 sec activation delay)
Dim setting as set in product
DIM0 (3 sec activation delay)
DIM1 (3 sec activation delay)
DIM2 (3 sec activation delay)
DIM3 (3 sec activation delay)
DIM4 (3 sec activation delay)
Operation
Q-Spot™ 360-LED User Manual Rev. 6 19
Operation
DMX Values (cont.)
Person 2 Channel
1
2
Pan
Tilt
Function
3 Color Wheel
4 Gobo Wheel 1
5 Gobo Wheel 2
Value Percent/Setting
000
ó 010
011 ó 020
021
ó 030
031 ó 040
041 ó 050
051 ó 060
061 ó 070
071 ó 080
081 ó 095
096
ó 110
111 ó 125
126
ó 140
141 ó 155
156
ó 170
171 ó 185
186
ó 255
000 ó 010
011
ó 020
021 ó 030
031
ó 040
041 ó 050
051
ó 060
061
ó 070
071 ó 080
081
ó 090
091 ó 105
106
ó 120
121 ó 135
136
ó 150
151 ó 165
166
ó 180
181 ó 195
196
ó 210
211 ó 255
000
ó 255 0~540°
000 ó 255 0~270°
000
ó 009
010 ó 019
020
ó 029
030 ó 039
040 ó 049
050 ó 059
060
ó 069
070
ó 079
080 ó 099
100
ó 119
120 ó 139
140
ó 159
160 ó 179
180
ó 199
200 ó 219
220
ó 255
No Function
Red
Green
Yellow
Blue
Orange
Magenta
Light Blue
Light Blue/Magenta
Magenta/Orange
Orange/Blue
Blue/Yellow
Yellow/Green
Green/Red
Red/Open
Rainbow or Linear Effect
No gobo
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Shaking gobo 8
Shaking gobo 7
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Flow effect
No gobo
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Shaking gobo 7
Shaking gobo 6
Shaking gobo 5
Shaking gobo 4
Shaking gobo 3
Shaking gobo 2
Shaking gobo 1
Flow effect
20 Q-Spot™ 360-LED User Manual Rev. 6
DMX Values (cont.)
Person 2 Channel
6
7
8
9
10
11
Gobo Wheel 2 Rotation
Prism Rotation
Focus
Dimmer
Strobe
Function
Control
Value Percent/Setting
000
ó 060
061 ó 150
151
ó 165
166 ó 255
000
005 ó 009
010
ó 127
128
133
ó 004
ó 132
ó 255
360° Indexing
Clockwise Rotation ~ Slow to Fast
No Function
Counter-Clockwise Rotation ~ Slow to Fast
No Function
No Rotation
Counter-Clockwise Rotation ~ Slow to Fast
No Rotation
Clockwise rotate ~ Slow to Fast
000
ó 255 0~100%
000 ó 255 0~100%
000
ó 031
032 ó 063
064
ó 095
096 ó 127
128
ó 159
160 ó 191
192
ó 223
224 ó 255
Close
Open
Strobe 0~20Hz
Open
Pulse Effect
Open
Random Effect
Open
000 ó 019
020
ó 039
040 ó 059
060
ó 139
140 ó 149
150
ó 159
160 ó 169
170
ó 179
180 ó 189
190
ó 199
200 ó 219
220
ó 235
236 ó 239
240
ó 243
244 ó 247
248 ó 251
252 ó 255
No function
Pan/tilt black activation
Pan/tilt black deactivation
No function
Auto program 1 (3 sec activation delay)
Auto program 2 (3 sec activation delay)
Test (3 sec activation delay)
Custom program (3 sec activation delay)
Sound 1
Sound 2
Reset (3 sec activation delay)
Dim setting as set in product
DIM0 (3 sec activation delay)
DIM1 (3 sec activation delay)
DIM2 (3 sec activation delay)
DIM3 (3 sec activation delay)
DIM4 (3 sec activation delay)
Operation
Q-Spot™ 360-LED User Manual Rev. 6 21
Technical Information
5. Technical Information
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating. This can lead to reduced light source life and increased mechanical wear.
To clean your product:
· Unplug the product from power.
· Wait until the product has cooled.
· Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external vents and accessible internal components.
· Clean all external optics and glass/plastic surfaces with a mild solution of nonammonia glass cleaner or isopropyl alcohol.
· Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
· Wipe any dirt or grime to the outside edges of the lens, glass, or plastic surface.
· Gently polish the lenses until they are free of haze and lint..
Always dry the external optics, glass, and plastic surfaces thoroughly after cleaning them.
Refrain from spinning this product’s fans using compressed air.
Returns
The user must send the merchandise prepaid, in the original box, and with its original packing and accessories. CHAUVET® will not issue call tags.
Call CHAUVET® and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return.
The user must clearly label the package with an RMA number. CHAUVET® will refuse any product returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed label.
Once you have received the RMA number please include the following information on a piece of paper inside the box:
· Your name
· Your address
· Your phone number
· The RMA number
· A brief description of the problem(s)
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be the customer’s responsibility. Proper FedEx packing or double-boxing are recommended packaging methods.
CHAUVET® reserves the right to use its own discretion to repair or replace returned product(s).
22 Q-Spot™ 360-LED User Manual Rev. 6
Technical Specifications
6. Technical Specifications
Dimensions and
Weight
Electrical
Gobo Sizes
Length Width Height
13 in (330 mm) 10.6 in (270 mm) 18.6 in (473 mm)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power Supply Type
Switching (internal)
Weight
22 lbs (10 kg)
Range
100~240 V, 50/60 Hz
120 V, 60 Hz
Voltage Selection
208 V 60 Hz
Auto-ranging
230 V, 50 Hz Parameter
Consumption
Operating
Fuse/Breaker
74 W
1.023 A
T 3.15 A, 250 V
US/Worldwide
71 W
.572 A
T 3.15 A, 250 V
72 W
.541 A
T 3.15 A, 250 V
Europe Power I/O
Power input connector
Power output connector
Power cord plug
Gobo Wheel 2
Outside
IEC
Edison
Edison (US)
Gobo Dimensions
25.8 mm
IEC
IEC
Local plug
Image
Thickness
Light Source
Type
LED
Photo Optic
Parameter
Illuminance @ 5 m
Beam angle
Thermal
Max. External Temperature
104° F (40° C)
Color
White
DMX
Ordering
I/O Connectors
3- and 5-pin XLR
Product Name
Q-Spot™ 360-LED
20.45 mm
1.35 mm
Power
10 W
Quantity
3
Standard Optics
1100 lx
16º
Cooling System
Fan Assisted Convection
Connector Type
Sockets
Item Code
01010564
Lifespan
50,000 hours
Current
3 A
Channel Range
11,14
UPC Number
781462209124
Q-Spot™ 360-LED User Manual Rev. 6 -23-
Contact Us
World Headquarters
CHAUVET®
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice:
Fax:
Toll free:
(954) 929-1115
(954) 929-5560
(800) 762-1084
Technical Support
Voice:
Fax:
(954) 929-1115 (Press 4)
(954) 756-8015
Email: [email protected]
World Wide Web www.chauvetlighting.com
United Kingdom and Ireland
CHAUVET® Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice:
Fax:
+44 (0)1773 511115
+44 (0)1773 511110
Technical Support
Email: [email protected]
World Wide Web www.chauvetlighting.co.uk
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project