Manual - LW2300 LIVE SD Series Wireless Home Monitor

Manual - LW2300 LIVE SD Series Wireless Home Monitor
www.lorextechnology.com
DIGITAL WIRELESS QUAD
SURVEILLANCE SYSTEM
WITH BUILT-IN VIDEO RECORDER AND
INDOOR/OUTDOOR MOTION CAMERA(S)
Instruction Manual
English Version 3.0
MODELS:
LW2301 Series
www.lorextechnology.com
Copyright © 2010 Lorex Technology Inc.
Important Safeguards
Thank you for purchasing the Digital Wireless Quad Video Recording System.
This manual refers to the following products:
•
LW2301 Series
Please visit us on the web for the most current Manuals, Quick Start Guides and Firmware.
Additional Language Manuals may also be available at:
www.lorextechnology.com
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
products ‘ enclosure that may be of sufficient magnitude
to constitute a risk of electric shock
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
THE PLUG TO THE WIDE SLOT AND FULLY INSERT.
2
NEED HELP?
CONTACT US FIRST
DO NOT RETURN THIS PRODUCT TO THE STORE
Please make sure to register your product at www.lorextechnology.com to receive product updates and information
3
EASY WAYS TO CONTACT US:

Online:
Product Support is a vaila ble 24/7 including product
inf orma tion, user manuals, quick start up guides an d FA Q ’s
a t www.lorextechnolog y.com/support
To order accessories, visit
w ww.lorextechnolog y.com

By Email:
Technical Support (f or technical/installa tion issues)
s u [email protected]
Customer Care (f or warranty and accessor y sales)
c u stomerser [email protected]
Customer Feedback
i n f [email protected]

By Phone:
NORTH AMERICA:
CUSTOMER SERVICE: 1-888-425-6739 (1-888-42-LOREX)
TECH SUPPORT: 1-877-755-6739 (1-877-75-LOREX)
MEXICO: 1-866-427-6739
INTERNATIONAL: +800-425-6739-0
(Example: From the UK, dial 00 instead of +)
Ve r sion 8 - April 27 2010
NECESITA AYUDA
VOUS AVEZ BESOIN
D’AIDE?
COMUNÍQUESE PRIMERO
CON NOSOTROS
CONTACTEZ-NOUS
D’ABORD
NO DEVUELVA ESTE PRODUCTO A LA TIENDA
NE RETOURNEZ PAS CE PRODUIT AU MAGASIN
Cerciórese de por favor colocar su producto en www.
lorexcctv.com/registration para recibir actualizaciones y la información del producto
Veuillez veiller à enregistrer votre produit à www.
lorexcctv.com/registration pour recevoir des mises à
jour et l’information de produit
3
3
maneras sencillas de comunicarse
con nosotros :

www
En línea:
apoyo al producto disponible 24/7 incluyendo información
del producto, manuales para el usuario, guías de inicio
rápido y preguntas más frecuentes en
façons faciles de nous contacter :

www
www.lorextechnology.com/support

le support des produits est disponible 24 heures sur 24, 7
jours sur 7, y compris les informations sur les produits, les
guides de l’utilisateur, les guides de démarrage rapide et
les foires à questions
Para colocar pedidos de accesorios, visite
www.lorextechnology.com/support
www.lorextechnology.com
Pour commander des accessoires, visitez
Por Correo Electrónico:
soporte técnico (para asuntos técnicos/la instalación)
[email protected]
O
www.lorextechnology.com

Par Courriel:
support technique (pour les questions techniques et
d’installation) [email protected]
OU
servicio al cliente (respecto a la garantía y a la venta
de accesorios)
service à la clientèle (pour les questions de garantie
et les ventes d’accessoires)
[email protected]
[email protected]
Commentaires des clients
Comentarios de cliente
[email protected]
[email protected]

En ligne:
Por Teléfono:
L’AMÉRIQUE DU NORD:
ATENCIÓN AL CLIENTE: 1-888-425-6739 (1-888-42-LOREX)
SOPORTE TÉCNICO: 1-877-755-6739 (1-877-75-LOREX)

Par Téléphone:
NORTE AMÉRICA:
SERVICE À LA CLIENTÈLE: 1-888-425-6739 (1-888-42-LOREX)
SUPPORT TECHNIQUE: 1-877-755-6739 (1-877-75-LOREX)
MEXICO: 1-866-427-6739
MEXICO: 1-866-427-6739
INTERNACIONAL: +800-425-6739-0
INTERNATIONAL: +800-425-6739-0
(Ejemplo: Desde el Reino Unido, marque el 00 en lugar del +)
(Exemple: À partir du Royaume-Uni, composez 00 au lieu de +)
sus opiniones son bienvenidas en
[email protected]
para colocar pedidos de accesorios, visite
nous serions heureux de recevoir vos
commentaires à [email protected] pour
commander des accessoires, visitez
www.lorextechnology.com
www.lorextechnology.com
Ve r sion 8 - April 27 2010
B E F O R E Y O U S TA R T
THIS PRODUCT MAY REQUIRE PROFESSIONAL INSTALLATION
LOREX IS COMMITTED TO FULFILLING YOUR SECURITY NEEDS
• We have developed user friendly products and documentation.
Please read the Quick Start Guide and User Manual before you
install this product.
• Consumer Guides and Video Tutorials are available on our web
site at www.lorextechnology.com/support
• If you require further installation assistance, please visit
www.lorextechnology.com/installation or contact a
professional installer.
• Please refer to the “Need Help” insert for technical support and
customer care information.
• Please note that once the components of this product have been
unsealed, you cannot return this product directly to the store
without the original packaging.
April 27 2010 R3
www.lorexcctv.com
AVANT DE
COMMENCER
ANTES DE
EMPEZAR
CE PRODUIT POURRAIT EXIGER UNE
INSTALLATION PROFESSIONNELLE
ESTE PRODUCTO PUEDE EXIGIR UNA
INSTALACIÓN PROFESIONAL
LOREX S’ENGAGE À SATISFAIRE
VOS BESOINS SÉCURITAIRES
LOREX SE COMPROMETE A SATISFACER
SUS NECESIDADES EN SEGURIDAD
• Veuillez lire le guide de démarrage rapide et le
mode d’emploi avant d’installer ce produit.
• Favor de leer la guía de instalación rápida y la
guía del usuario antes de instalar este producto.
• Les guides du consommateur et les séances
de tutorat vidéo sont disponibles sur l’Internet en
visitant www.lorextechnology.com/support
• Puede conseguir las guías del consumidor y
los cursos en enseñanza video sobre el Internet
visitando www.lorexcctv.com/support
• Si vous avez besoin de l’aide pour l’installation,
veuillez visiter www.lorextechnology.com/installation
ou contactez un spécialiste en installation
• Si necesita ayuda para la instalación, visite
www.lorextechnology.com/installation o contacte un
especialista en instalaciones
• Veuillez référer à l’insert “Need Help” pour
ob¬tenir de l’information sur le service à la clientèle et le support technique
• Favor de referir al documento “Need Help” para
obtener información acerca del servicio al cliente
y al soporte técnico
• Veuillez constater qu’une fois que les
com¬posantes de ce produit ont été retirées de
l’emballage, vous ne pourrez plus retourner ce
produit directement au magasin.
• Favor de notar que una vez que los componentes de este producto han sido removidos del
embalaje, no podrá devolver este producto directamente a la tienda
www.lorextechnology.com
April 27 2010 R3
Important Safeguards
In addition to the careful attention devoted to quality standards in the manufacture process of
your video product, safety is a major factor in the design of every instrument. However, safety is
your responsibility too. This sheet lists important information that will help to assure your
enjoyment and proper use of the video product and accessory equipment. Please read them
carefully before operating and using your video product.
Installation
1.
2.
3.
4.
Read and Follow Instructions - All the safety
and operating instructions should be read
before the video product is operated. Follow
all operating instructions.
Retain Instructions - The safety and
operating instructions should be retained for
future reference.
Heed Warnings - Comply with all warnings
on the video product and in the operating
instructions.
Polarization - Do not defeat the safety
purpose of the polarized or grounding-type
plug.
o A polarized plug has two blades with
one wider than the other.
o A grounding type plug has two
blades and a third grounding prong.
o The wide blade or the third prong is
provided for your safety.
o If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete
outlet
5.
6.
7.
Power Sources - This video product should
be operated only from the type of power
source indicated on the marking label. If you
are not sure of the type of power supply to
your location, consult your video dealer or
local power company. For video products
intended to operate from battery power, or
other sources, refer to the operating
instructions.
Overloading - Do not overload wall outlets of
extension cords as this can result in the risk
of fire or electric shock. Overloaded AC
outlets, extension cords, frayed power cords,
damaged or cracked wire insulation, and
broken plugs are dangerous. They may result
in a shock or fire hazard. Periodically
examine the cord, and if its appearance
indicates damage or deteriorated insulation,
have it replaced by your service technician.
Power-Cord Protection - Power supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the video product.
8.
Ventilation - Slots and openings in the case
are provided for ventilation to ensure reliable
operation of the video product and to protect
it from overheating. These openings must not
be blocked or covered. The openings should
never be blocked by placing the video
equipment on a bed, sofa, rug, or other
similar surface. This video product should
never be placed near or over a radiator or
heat register. This video product should not
be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the video product manufacturer’s
instructions have been followed.
9. Camera Extension Cables – Check the rating
of your extension cable(s) to verify
compliance with your local authority
regulations prior to installation.
10. Attachments - Do not use attachments
unless recommended by the video product
manufacturer as they may cause a hazard.
11. Water and Moisture - Do not use this video
product near water. For example, near a bath
tub, wash bowl, kitchen sink or laundry tub, in
a wet basement, near a swimming pool and
the like. Caution: Maintain electrical safety.
Power
line
operated
equipment
or
accessories connected to this unit should
bear the UL listing mark of CSA certification
mark on the accessory itself and should not
be modified so as to defeat the safety
features. This will help avoid any potential
hazard from electrical shock or fire. If in
doubt, contact qualified service personnel.
12. Accessories - Do not place this video
equipment on an unstable cart, stand, tripod,
or table.
The video equipment may fall,
causing serious damage to the
video product. Use this video
product only with a cart, stand,
tripod, bracket, or table
recommended by the
manufacturer or sold with the
video product.
Any mounting of the product should follow
the manufacturer’s instructions and use a
mounting accessory recommended by the
manufacturer.
3
Important Safeguards
Service
Use
13. Servicing - Do not attempt to service this
video equipment yourself as opening or
removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19. Cleaning - Unplug the video product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
14. Conditions Requiring Service - Unplug this
video product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions.
A. When the power supply cord or plug is
damaged.
B. If liquid has been spilled or objects have
fallen into the video product.
C. If the video product has been exposed to
rain or water.
D. If the video product does not operate
normally by following the operating
instructions. Adjust only those controls
that are covered by the operating
instructions. Improper adjustment of
other controls may result in damage and
will often require extensive work by a
qualified technician to restore the video
product to its normal operation.
E. If the video product has been dropped or
the cabinet has been damaged.
F. When the video product exhibits a distinct
change in performance. This indicates a
need for service.
15. Replacement Parts - When replacement
parts are required, have the service
technician verify that the replacements used
have the same safety characteristics as the
original parts. Use of replacements specified
by the video product manufacturer can
prevent fire, electric shock or other hazards.
16. Safety Check - Upon completion of any
service or repairs to this video product, ask
the service technician to perform safety
checks recommended by the manufacturer to
determine that the video product is in safe
operating condition.
17. Mounting - The cameras provided with this
system should be mounted only as instructed
in this guide, using the provided mounting
brackets.
18. Heat - The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.
4
20. Product and Cart Combination - Video and
cart combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the video product and car
combination to overturn
21. Object and Liquid Entry - Never push objects
for any kind into this video product through
openings as they may touch dangerous
voltage points or “short-out” parts that could
result in a fire or electric shock. Never spill
liquid of any kind on the video product
22. Lightning - For added protection for this
video product during a lightning storm, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power line surges. The
manufacturer’s instructions and use a
mounting accessory recommended by the
manufacturer.
General Precautions
1. All warnings and instructions in this manual should be followed
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water
dampened cloth for cleaning
3. Do not use this unit in humid or wet places
4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not
be blocked
FCC NOTICE
This device complies with Part 15, subpart C, of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to
operate the equipment.
However, it is imperative that the user follows the guidelines in this manual to avoid
improper usage which may result in damage to the unit, electrical shock and fire hazard
injury
In order to improve the feature functions and quality of this product, the specifications are
subject to change without notice from time to time.
www.lorexcctv.com
5
Features
Features
Technology
ƒ Ultra Digital Wireless technology features the latest advancements in wireless video surveillance
ƒ Minimizes interference with other devices such as wireless routers, cordless phones, Bluetooth
devices and is Wi-Fi friendly
ƒ 100% Digital video and audio provides excellent image quality and crystal clear sound
ƒ Offers a secure connection between the receiver and camera for total privacy
ƒ Signal strength and out of range notifications help you find best possible installation location
Receiver
ƒ Built-in Video Recorder with SD memory card slot
ƒ Includes SD memory card and supports up to 16 GB size
ƒ Record when motion is detected by the camera or schedule a recording start and stop time
ƒ Record at VGA (640x480) resolution for excellent playback quality or QVGA (320x240) resolution to
maximize recording time
ƒ Viewing Options:
• Quad Mode Shows up to 4 Camera Views on Same Screen
• Auto Sequence Viewing Mode Shows each camera in Full Screen
ƒ On-screen menu system makes set-up and changing camera settings easy
ƒ Connects in minutes to any TV
ƒ System expandable up to 4 cameras
ƒ Includes IR extender so you can hide the receiver out of plain sight and still control all functions
using the included remote control
ƒ New recording / memory full indicators
ƒ Place on a flat surface or wall mount with included mounting kit
ƒ SMA connector allows for the usage of higher power antennas to extend wireless range
(antennas sold separately)
Camera
ƒ VGA (640x480) Resolution Camera
ƒ IR Night Vision 40 ft. / 12 m*
ƒ Built-in PIR motion sensor for accurate motion detection
ƒ Durable weather resistant housing for indoor/outdoor use**
ƒ Microphone for listen-in surveillance
* Stated IR Illumination range is based on ideal conditions. Actual range and image clarity depends on installation location, viewing
area and light reflection/absorption level of object
**Not intended for direct exposure to rain or snow. Installation under a sheltered environment recommended.
The Digital Wireless signal transmission type used by the Lorex LW2301 series is also known as FHSS –
Frequency Hopping Spread Spectrum. This type of signal is highly resistant to deliberate jamming as it
generates a channel hopping sequence using an algorithm generated by the receiver system.
6
Table of Contents
Getting Started ................................................................................................................................................ 8
Wireless Receiver ........................................................................................................................................... 9
Camera........................................................................................................................................................... 11
Remote Control ............................................................................................................................................. 12
Installing the Camera ................................................................................................................................... 13
Connecting the Wireless Receiver ............................................................................................................... 14
LED Indicators on the Wireless Receiver .................................................................................................. 15
Using the System........................................................................................................................................... 16
On-Screen Display...................................................................................................................................... 16
Viewing Modes............................................................................................................................................... 18
Quad Mode.................................................................................................................................................. 19
Setting the Time ............................................................................................................................................ 20
Recording....................................................................................................................................................... 21
Recording Mode Summary......................................................................................................................... 21
Manual Recording ...................................................................................................................................... 22
Schedule Recording ................................................................................................................................... 23
Stopping Schedule Recording ................................................................................................................ 24
Motion Recording ....................................................................................................................................... 25
Viewing Recorded Video................................................................................................................................ 27
Viewing Video Using the System ................................................................................................................ 27
Controlling Playback .............................................................................................................................. 29
Viewing Video Directly From the SD Card.................................................................................................. 30
PC............................................................................................................................................................ 30
Mac.......................................................................................................................................................... 30
Using the Main Menu ..................................................................................................................................... 31
Camera On/Off............................................................................................................................................ 32
Record ........................................................................................................................................................ 33
Quality ..................................................................................................................................................... 34
VGA or QVGA? ......................................................................................................................................... 34
Trigger Record........................................................................................................................................ 35
Schedule Record..................................................................................................................................... 36
Overwrite ................................................................................................................................................ 37
Pairing ........................................................................................................................................................ 38
Settings....................................................................................................................................................... 40
Date & Time ............................................................................................................................................ 41
AV Out...................................................................................................................................................... 42
Zoom ....................................................................................................................................................... 43
Brightness .............................................................................................................................................. 44
Format .................................................................................................................................................... 45
Default .................................................................................................................................................... 46
Appendix A: System Specifications .............................................................................................................. 47
Appendix B: About Digital Wireless Technology ......................................................................................... 48
Appendix C: Adding Cameras ....................................................................................................................... 49
Appendix D: Strengthening the Range of the Wireless Signal ................................................................... 50
Appendix E: Deleting Video Files on the System ......................................................................................... 52
Appendix F: Estimated Recording Times on SD Cards................................................................................ 53
Appendix G: Power Failure ........................................................................................................................... 54
Troubleshooting ............................................................................................................................................ 55
FAQ................................................................................................................................................................. 56
7
Getting Started
Getting Started
The system comes with the following components:
COLOR NIGHT VISION
CAMERA(S)*
CAMERA MOUNTING
STAND(S)*
WIRELESS
RECEIVER
SD MEMORY
CARD
AUDIO/VIDEO CABLE
REMOTE
CONTROL
POWER ADAPTERS (FOR
RECEIVER & CAMERA)*
IR EXTENDER
WALL MOUNTING KIT
(FOR RECEIVER AND
CAMERA(S))*
WIRELESS ANTENNA
(FOR CAMERA(S))*
*Camera configuration may vary by model
CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE
SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
8
Wireless Receiver
Top Panel
3
2
4
1
5
6
7
1. CHANNEL: Press M to change channels 1~4 manually; press A to enable Auto Sequence Viewing
Mode.
2. RECORD: Press M to start Manual Recording; press M again to stop. Press A to start Motion
Recording; press A again to stop.
NOTE: The date and time must be set on the system prior to using Schedule Recording. For
details, see “Setting the Time” on page 20.
3. Channels, OK: QUAD MODE ONLY—Press 1 to view camera 1, 2 to view camera 2, 3 to view
camera 3, and 4 to view camera 4; press OK to enter/confirm menu selections.
NOTE: The OK button serves the same function as the Enter button on the remote control.
4. Quad: Press to change display view to Quad (4-way); press again to exit.
5. MENU: Press to open the Main Menu, cancel/exit, or go to the previous page.
6. Del.: Press to delete files on the SD card
7. LED Indicators: LED indicators for camera and receiver operations. For details, see “LED
Indicators on the Wireless Receiver” on page 15.
9
Wireless Receiver
Left Panel
2
1
4
3
1. Antenna: Connection jack for the wireless antenna.
2. DC: Connect the included power adapter.
3. AV Out: Connect the included Audio/Video cable to display images from the receiver on your
TV/monitor.
4. Alarm Vol.: Adjust the volume of the motion alarm; will also adjust volume of system “beeps”
when you press buttons on the receiver and remote control.
Right Panel
1
3
2
1. IR Extension: Connect the included IR extender (optional).
2. Lock: Slide to lock the buttons on the wireless receiver.
3. SD Card: Insert an SD card (max 16 GB) as shown on the diagram.
Pair
VGA
/
QVGA
10
Camera
5
7
3
6
2
1
4
1. PIR Sensor: Passive IR motion sensor for more accurate motion recording.
2.
Microphone: Built-in microphone underneath camera body.
3.
Lens: Camera lens.
4.
Night Vision IR: Night vision IR LEDs used for viewing in complete darkness.
5.
Pair: Pairing button. For more details, see “Pairing” on page 38.
6.
Antenna: Wireless antenna.
7.
Power Cable: Connect the included power adapter to the cable extending from the camera.
11
Remote Control
Remote Control
ATTENTION: Before using the remote
control, remove the protective clear
plastic tab from the battery cover.
1
7
2
1. 1/f: Move menu cursor UP;
play/pause playback; jump to
camera 1 while in Quad Mode.
2.
Enter: Confirm menu selections
(same as OK on the wireless
receiver).
3.
4/: Move menu cursor LEFT;
decrease values in certain menu
options; rewind playback; jump to
camera 4 while in Quad Mode.
4.
MENU / Back: Press to open the
Main Menu; go back/close menu
windows.
5.
Record: Press Motion to enable
motion recording – system will
ONLY record when motion is
to start/stop
detected; press
manual recording.
6.
Volume: Press to
increase/decrease volume during
playback. Use the receiver to
change volume of buzzer and
motion alarm.
7.
Quad: Press to change the display
view to quad (4-way) split-screen.
8.
2/: Move menu cursor RIGHT;
increase values in certain menu
options; increase playback speed;
jump to camera 2 while in Quad
Mode.
9.
3/: Move menu cursor DOWN;
decrease values in certain menu
options; stop playback; jump to
camera 3 while in Quad Mode.
8
3
9
4
10
5
11
6
12
Figure 1.0 Remote Control
10. Scan/Del: Press to delete
recorded video files.
11. Channel: Press “A” to enable/disable Auto Sequence Viewing Mode; press M to manually change
the channels (1~4).
12. AV: Not used.
NOTE: Unless otherwise noted, button names mentioned in steps in this manual will refer to
buttons on the remote control.
12
Installing the Camera
Before you install the camera, carefully plan where
and how it will be positioned, and where you will
route the cable that connects the camera to the
power adapter.
•
•
Before starting permanent installation,
verify its performance by observing the
image on a monitor when camera is
positioned in the same location/position
where it will be permanently installed
The cameras are pre-paired so they would
work out of the box. Each camera has a
channel number sticker indicating what
channel they are paired to (see figure 2.0).
To manually pair your cameras, see
Appendix C on page 49.
Figure 2.0 Verify camera channel before
mounting.
Installation Warnings:
•
•
•
•
Figure 2.1 Attach stand to mounting surface
Mount the camera indoors or outdoors. For
outdoor installation, mount it in a
sheltered place where it is not directly
exposed to rain or snow.
Aim the Cameras to best optimize the
viewing area: Select a location for the
camera that provides a clear view of the
area you want to monitor, which is free
from dust, and is not in line-of-sight to a
strong light source or direct sunlight
Avoid installing the cameras where there
are thick walls or obstructions between the
Cameras and the Receiver
Figure 2.2 Attach the camera to the stand and
Select a location for the camera that has an
tighten thumbscrews
ambient temperature between 14°F~122°F (-10°C ~ 50°C)
To install the camera:
1. Use the included mounting screws to mount
the stand to the mounting surface:
• Mark the position of the screw holes on the wall
• Drill holes and insert the drywall plugs as needed
• Firmly attach the stand to the wall using the provided screws
2. Screw on the wireless antenna to the rear panel of the camera.
3. Attach the camera to the mounting stand. Adjust the angle of the camera until the desired
view is set. Tighten the thumbscrews to secure the desired camera position.
4. Connect the black power cable extending from the camera to the cable of the power
adapter; plug the power adapter to an outlet or surge protector.
13
Connecting the Wireless Receiver
NOTE: You can install additional cameras (maximum of 4 cameras). When adding cameras that
were not included in the original box, you will need to pair the cameras with the receiver. For
details, see “Appendix C: Adding Cameras” on page 49.
Connecting the Wireless Receiver
To set up the wireless receiver:
1. Connect the Black cable from the AV cable to AV Out port on the left panel of the receiver.
Connect the Yellow video cable and White audio cable (mono) to your TV, DVR, or
observation system.
2. Insert the included SD card into the SD Card slot on the right panel of the receiver until you
hear a “click.”
NOTE: The receiver is compatible with most major brands of SD card up to 16 GB. For recording
times on SD cards, see “Appendix F: Estimated Recording Times on SD Cards” on page 53.
3. Place the receiver in a place that will have a clear reception to your camera*.
4. Connect the cable from the power adapter to the 9V DC port on the left panel of the receiver,
and then connect the power adapter to an outlet or surge protector.
5. Change the video input on your TV or monitor to the corresponding input of the video cable
(i.e. Video 1, Video 2, Auxiliary, etc.).
6. OPTIONAL: Connect the included IR extender to the IR Extension port on the right panel of
the receiver. Use the IR extender to if you want to hide the receiver from plain sight. You can
conceal the sensor of the IR Extender in a bookcase, flowers, etc., and still fully control the
system using the included remote control.
RECEIVER (LEFT PANEL)
POWER
ADAPTER
AV CABLE
Figure 3.0 Connect the power adapter, and AV cable
RECEIVER (RIGHT PANEL)
IR EXTENDER
SD CARD
Figure 3.1 Connect the IR extender (optional) and insert the SD card
14
*Avoid installing in a location which requires the wireless signal to pass through cement, concrete, and metal
structures. This will reduce the range of transmission.
LED Indicators on the Wireless Receiver
Use the LED indicators on the wireless receiver to observe the status of the receiver, cameras,
and SD card.
Figure 3.2 LED indicators on wireless receiver
The blue LEDs indicate the following:
•
MANUAL: Channel switching set to manual
•
AUTO: Channel switching set to Auto – Auto Sequence Viewing Mode enabled
NOTE: By default, Auto Sequence Viewing Mode is enabled when you first power on the wireless
receiver.
•
M: Manual recording enabled
•
A: Motion recording enabled
•
NEW: A new video file has been recorded to the SD card
•
FULL: The SD card is full
NOTE: The “Full” light will only appear if Overwrite is disabled. For details, see “Overwrite” on
page 37.
15
Using the System
Using the System
By default, the camera included with your system is automatically paired to the wireless
receiver. The camera and receiver will communicate with one another once they are powered
on.
On-Screen Display
With camera 1 properly connected and powered on, the system displays a single channel fullscreen live view of the camera.
NOTE: You should always power on the cameras before powering on the receiver.
1
2
REC
Cam1
4
160602-1.AVI
5
3
6
7
2009 07 17
16:32:05
8
Figure 4.0 Live viewing – single channel
1. Signal Indicator: Strength of the wireless signal between the camera and the wireless
receiver.
2. Recording Indicator: “REC” appears during manual, motion, and schedule recording.
3. File Name: Name of the file actively being recorded.
4. Camera indicator: Displays the camera you are presently viewing; position of camera
indicators shifts to the left side of the screen while in Quad mode.
5. File Icon: Flashing yellow icon indicates a new video file is on the SD card.
6. Power Failure icon: Flashing icon indicates a power failure occurred while the system was
recording.
7. SD Card icon: Icon appears when an SD card is present in the receiver; an SD card is required
for recording.
8. Time Stamp: The current date and time on the system.
16
On-Screen Display (cont’d.)
1. Signal Indicator – The signal indicator
shows the strength of the signal being
received from the camera.
The number of bars in the Signal Indicator
shows the strength of the signal – One or No
Bars indicates the signal is poor, and 4 bars
indicate a very strong signal.
REC
Cam1
160602-1.AVI
NOTE: Signal Indicator not shown while
in Quad Mode.
ATTENTION: If signal is low (e.g. 1 or 2
bars) adjust the antennas, or reposition
the cameras or receiver for best
performance.
2. Recording Indicator: The red REC icon
indicates the system is currently recording.
3. File Name: Name of the file actively being recorded.
This file will appear in the file list on the SD card. The
Recording File stamp indicates the hour, minutes, and
seconds that the system started recording (see figure
4.2).
4. Channel Indicator – Displays the current channel
number. Press the Channel—M button on the
Receiver to switch between available cameras.
2009 07 17
16:32:05
Figure 4.1 On-screen display
160602-2.AVI
Hour
(24-HR)
Minutes Seconds Camera
File
extension
(AVI)
Figure 4.2 Recording File Stamp
5. File Icon: Flashes yellow when writing data to the
SD card; flashes red when the SD card is full.
6. Power Failure icon: Flashing icon indicates a power
failure occurred while the system was recording. You
may need to manually restore settings or modes on
the system after a power failure. For more details,
see “Appendix G: Power Failure” on page 54.
Figure 4.3 SD card icon: new file and full
9
7. SD card icon: White “SD” icon displays that an SD
card is in the wireless receiver.
NOTE: You cannot record without an SD card.
8. Time Stamp: The current date and time.
9. Status Indicator – The Status indicator message
“Connecting” appears when the receiver is trying to
locate a camera.
NOTE: There may be temporary signal losses for
less than 1 second, due to the connection
retrieval process between the Camera and
Receiver (when switching between channels).
This is a normal operation of the receiver.
Figure 4.4 Camera Status Indicator
17
Viewing Modes
Viewing Modes
There are three different viewing modes available on the system: single channel viewing, Auto
Sequence Viewing Mode (view individual channels automatically in sequence), and Quad mode.
To change viewing modes:
ƒ
Press the Channel—A button to enable Auto Sequence Viewing Mode and switch
automatically between channels; press Channel—M button to disable Auto Sequence.
OR
ƒ
Press the Channel—M button repeatedly to switch between channels 1~4
NOTE: By default, Auto Sequence Viewing Mode is enabled when you first power on the system.
A=Auto Sequence
Cam1
Cam4
Channel 1
Channel 4
PAIR
Cam3
Channel 3
Cam2
Press the Channel—M and A buttons on the receiver
or remote control
M=Manual switching
Figure 5.0 View Mode diagram
18
Channel 2
Quad Mode
Use Quad mode to view up to four cameras simultaneously.
To enable/disable Quad mode:
•
Press the QUAD button on the wireless receiver or the remote control; The Schedule
Recording warning appears briefly on-screen (see figure 5.2), then the Quad display
mode begins.
NOTE: The signal indicator or SD card icon are not shown while the receiver is in Quad mode.
NOTE: You cannot access the Main Menu while the system is in Quad Mode.
Cam1
Cam2
Cam3
Cam4
Figure 5.1 Quad Mode
Quad mode is also available while in Zoom mode. For details on using Zoom, see “Zoom” on
page 43.
ATTENTION: While in Quad Mode,
you cannot turn on Schedule
Recording.
Schedule
Recording Cannot
begin because you
are in Quad Mode
Recording Tip!
Using Quad Mode with Motion Recording is a highly
recommended recording solution. For more details, see
“Motion Recording” on page 25.
Figure 5.2 Quad Mode warning
19
Setting the Time
Setting the Time
It is highly recommended to set the time on the system prior to recording. You need to set the
correct date and time in order to use Schedule Recording. For more details, see “Motion
Recording” on page 25.
2009/07/07
13:35:42
Figure 6.0 Clock Set
To set the date and time:
1. Press the MENU button to open the Main Menu.
2. From the Main Menu, select Setting and press the Enter/OK button.
3. From the Setting menu, select Date & Time and press the Enter/OK button.
4. Press RIGHT/LEFT to move the cursor; press UP/DOWN to change the year, month, day,
hour, minutes, and seconds.
NOTE: The system uses a 24-hour clock.
5. Press Enter/OK to save your settings.
REC
Cam1
160602-2.AVI
6. Press MENU to close any remaining menu
windows.
The date and time appear in the bottom-right corner
of the main display screen.
NOTE: There no daylight savings time (DST) setting
on the system. DST must be set manually if
necessary.
20
2009 07 17
16:32:05
Recording
Three recording modes are available on the system: Manual Recording, Schedule Recording,
and Motion Recording.
NOTE: An SD card must be inserted in the wireless receiver in order to record. You should always
format the SD card prior to initial recording. For details, see “Format” on page 45.
NOTE: The system can record video to an SD card one channel at a time.
NOTE: Recording overrides other actions on the receiver. You must stop recording on the system
in order to perform other actions, such as opening the Main Menu, Quad Mode, etc.
Recording Mode Summary
Mode
Description
• Continuous recording from one camera
button on the remote control or the RECORD—M button on
the receiver to start/stop manual recording
• Cannot record while in Quad mode
• Cannot record while in Auto Sequence Viewing Mode
• Press the Record—
MANUAL
RECORDING
SCHEDULE
RECORDING
MOTION
RECORDING
(AUTO)
• Continuous recording from one camera or from Auto Sequence Viewing Mode
(system will record from one camera at a time)
• ATTENTION: Turn off Manual Recording and Motion Recording to enable Schedule
Recording
• Enter a Start and Stop Time from Main Menu>Record>Schedule Record
• Cannot enable Schedule Recording while in Quad Mode
•
•
•
•
System only records when motion is detected by a camera
Compatible with Quad Mode (recommended)
Compatible with Auto Sequence Viewing Mode
Press the Motion button on the remote control or the RECORD—A button on the
receiver to start/stop Motion Recording
For more details on each recording mode, see “Manual Recording” starting on page 22.
21
Recording
Manual Recording
Manual Recording allows you to manually start/stop recording from one channel at a time. You
cannot record while in Quad mode.
You can also record while in Zoom mode. For details on using Zoom, see “Zoom” on page 43.
NOTE: You cannot change channels or enable Auto Sequence Viewing Mode during Manual
Recording.
Cam1
REC
160602-1.AVI
2009 07 17
16:32:05
Figure 7.0 Recording indicated by the OSD
To enable Manual Recording:
1. Select a channel (1~4) on the wireless receiver or from the remote control.
2. Press the Record— button on the remote control or RECORD—M button on the wireless
receiver. A blue LED will light up under RECORD—M on the wireless receiver.
3. To stop Manual Recording, press the Record— button on the remote control or
RECORD—M button on the wireless receiver again.
When Should I Use Manual Recording?
22
•
Emergency recording
•
Low traffic environments
Schedule Recording
Use Schedule Recording to have the system automatically record continuously from a selected
camera or from Auto Sequence Viewing Mode according to a start and stop time. You must set a
Recording Schedule in the main menu in order to use Schedule Recording.
NOTE: Please ensure you have set the date and time on the receiver prior to setting a recording
schedule.
NOTE: Auto Sequence Viewing Mode is available during Schedule Recording. However, the
system will record video of the sequence itself. Therefore, you cannot playback video of individual
cameras.
Figure 7.1 Start and Stop Times for Schedule Recording
To set a recording schedule:
1. Press the MENU button to open the Main Menu.
2. Select Record and press the Enter/OK button.
3. Press RIGHT/LEFT to move the cursor (yellow); press UP/DOWN to change the hour and the
minutes.
NOTE: You need to press RIGHT to move the cursor from Start Time to Stop Time.
4. Press the Enter/OK button to save your schedule.
5. Press MENU until all menu windows are closed.
NOTE: You cannot enable Schedule Recording if the system is in Quad Mode.
23
Recording
To enable schedule recording:
1. Disable ALL RECORDING on the system:
• If the system is in Manual Recording, press the Record— button on the remote control or the
RECORD—M button on the wireless receiver so the blue LED does NOT appear on the wireless
receiver
• If the system is in Motion Recording, press the RECORD—A/Motion button until the blue LED
does NOT appear on the wireless receiver
ATTENTION: Manual Recording, Motion Recording, and Quad Mode will override
Schedule Recording. If you wish to use Schedule Recording, you must ensure Manual
Recording, Motion Recording, and Quad Mode are disabled.
2. Select a channel (1~4) on the wireless receiver or from the remote control
OR
Press the CHANNEL—A button to enable Auto Sequence Viewing Mode.
When the Start Time arrives, recording begins. The “REC” indicator appears on-screen.
NOTE: You cannot use Quad Mode with Schedule Recording.
Figure 7.2 Schedule Recording on the receiver – no blue LEDs should be lit up beneath Manual Recording (M) and
Motion Recording (A)
Stopping Schedule Recording
When the Stop Time arrives, the system stops recording. However, if necessary, you can also
stop Schedule Recording manually.
To stop Schedule Recording:
ƒ
Press Record— button on the remote control or the RECORD—M button on the
wireless receiver to stop schedule recording
NOTE: If you stop Schedule Recording, you cannot resume Schedule Recording. You will need to
enter new Start and Stop times in the Schedule Record menu.
When Should I Use Schedule Recording?
24
•
It is recommended to use Schedule Recording for capturing a sensitive or important
target that needs to be recorded daily, i.e. a cash register, safe, shipping & receiving
docks, etc.
•
During the day in high traffic environments
Motion Recording
Use Motion Recording to have the system only record when motion is detected by one of the
cameras. The camera that appears on-screen is the only camera that is recording.
REC
A
B
Figure 7.3 Recording triggered by motion during the Motion Recording
To enable Motion Recording:
1. Press Motion on the remote control or the RECORD—A button on the wireless receiver. A
blue LED will light up beneath RECORD—A on the receiver.
2. Perform one of the following:
ƒ
Enable Quad Mode (recommended): Press the Quad button. When motion is detected,
the system will display the triggered camera on-screen. When motion recording is
complete, the view will return to Quad Mode.
ƒ
Enable Auto Sequence Viewing Mode: Press the CHANNEL—A button. When motion is
detected, the system will display the triggered camera on-screen. When motion
recording is over, Auto Sequence Viewing Mode will continue as normal.
ƒ
Change channels manually: Press the CHANNEL—M button on the wireless receiver or
remote control to select a channel.
ATTENTION: If you manually select a channel while the system is in Motion Recording
Mode, motion recording will ONLY apply to the selected channel. For example, with
Motion Recording enabled, you manually select channel 3; if motion were to occur in
view of camera 1, the system would NOT RECORD video from channel 1.
3. Press Motion on the remote control or the RECORD—A button on the wireless receiver
again to stop Motion Recording. The blue LED will turn off on the receiver.
The “REC” indicator will only appear when motion is detected by one of the cameras on-screen.
By default, the system is set to record for 15 seconds after the triggered motion event. For
details on adjusting the motion recording time, see “Trigger Record” on page 35.
25
Recording
When Should I Use Motion Recording?
•
Low traffic areas or non-sensitive/non-critical recording environments
•
Overnight recording
NOTE: In the event of a power failure, the system will restart in Auto Sequence Mode + Motion
Recording when power is restored. For more details, see “Appendix G: Power Failure” on page 54.
Recording Tip!
If you are using more than one camera, it is highly recommended to use Quad Mode with Motion
Recording. Quad Mode allows you to see all four cameras at once. When motion is detected, the
triggered camera will appear on-screen. After motion recording is complete, the receiver will
return to Quad Mode.
RE C
SD
Cam2
160602-2.AVI
2009 07 17
16:32:05
System in Quad Mode
with Motion Recording
26
Camera 2 detects motion, so the
system starts recording and
camera 2 is displayed onscreen
Once motion recording is
finished, the system
returns to Quad Mode
Viewing Recorded Video
With video recorded on the SD card, you can open the File menu to playback the video files.
ATTENTION: All recording must be stopped on the system prior to playing back saved
video files.
You can playback recorded video on the system (when connected to a TV or monitor) or directly
from the SD card – simply connect the SD card to your computer using a compatible SD card
reader.
Viewing Video Using the System
VIDEO
Figure 8.0 File list – root menu
To playback recorded video on the system:
1. Stop all recording on the system.
2. Press the Enter/OK button. The File menu opens.
3. Select the VIDEO folder and press Enter/OK button.
27
Viewing Recorded Video
..
080512
080513
080514
Figure 8.1 File list – Date folders (oldest on top)
4. Select a folder and press the Enter/OK button. Folders are labeled by date (yymmdd):
e.g. 080512. Select [. .] and press the Enter/OK button to go up a level.
5. Select a file from the list and press the Enter/OK button. The selected file loads and
playback begins.
..
091252_1
092003_2
092532_4
094106_1
100341_3
Figure 8.2 Video files
28
3MB
5MB
2MB
83MB
449KB
TIP!
Press LEFT and
RIGHT to change
pages to find video
files quickly.
Controlling Playback
Once the file begins playing, use the buttons on the remote control or wireless receiver to
control playback.
1
4
2
3
REMOTE CONTROL
WIRELESS RECEIVER
Figure 8.3 Playback buttons on the remote control and wireless receiver
1.
2.
3.
4.
: Play/Pause playback; restart video from the beginning.
: Fast forward playback 2X, 4X, 8X, 16X, 32X, and 64X. During fast-forward, press
to pause and then press again to play.
„: Stop playback.
: Rewind playback 1X, 2X, 4X, or 8X. During rewind, press to pause, then press
again to play.
•
REMOTE CONTROL: Press the Volume + / - buttons to increase/decrease volume during playback
•
Press the MENU button on the remote control or wireless receiver to return to the file
list
29
Viewing Recorded Video
Viewing Video Directly From the SD Card
You can view the saved video files on your computer (PC or Mac) by using an SD card reader (not
included). Saved video files are in AVI format.
NOTE: Some PCs and Macs may have an SD card reader built-in. Please refer to your computer’s
instruction manual for more details.
PC
ATTENTION: The XviD, DivX, or FFDShow codec is required if attempting to view the
video files in Windows Media Player™. You can also view AVI files natively in other media
players such as VLC and DivX Player.
To playback recorded video on a PC:
1. Remove the SD card from the wireless receiver by gently pushing on the SD card. The SD
card will pop out from the slot.
2. Insert the SD card into an SD card reader (not included) connected to your PC. Your PC
should load the SD card as a new Removable Drive.
3. View files and folders on the SD card. You should see a folder labeled “VIDEO.”
4. Open the VIDEO folder and then open one of the Date folders (yymmdd). The AVI file list
appears.
5. Double-click any of the AVI files. The video will begin playing in your default AVI media
player.
Mac
ATTENTION: Additional codecs are required if attempting to view AVI files in QuickTime.
VLC Player is recommended for viewing AVI files on a Mac. VLC is an open-source
freeware application available at HHwww.videolan.org
To playback recorded video on a Mac:
1. Remove the SD card from the wireless receiver by gently pushing on the SD card. The SD
card will pop out from the slot.
2. Insert the SD card into an SD card reader (not included) connected to your Mac. Your Mac
should load the SD card as a new Disk Image.
3. View files and folders on the SD card. You should see a folder labeled “VIDEO.”
4. Open the VIDEO folder and then open one of the Date folders (yymmdd). The AVI file list
appears.
5. Double-click any of the AVI files. The video will begin playing in your default AVI media
player.
For details on deleting files on the system, see “Appendix E: Deleting Video Files on the System”
on page 52.
30
Using the Main Menu
Use the Main Menu to configure camera and receiver settings.
To open the Main Menu:
• Press the MENU button on the wireless receiver or the remote control
NOTE: Make sure the display is in single channel full-screen view prior to opening the Main Menu
1
2
3
4
Figure 9.0 Main Menu
1. Camera On/Off: Enable/disable connected cameras.
2. Record: Configure recording parameters, set a recording schedule, and enable/disable
overwrite.
3. Pairing: Pair additional cameras to the receiver. For full details, see “Appendix C: Adding
Cameras” on page 49.
4. Setting: Configure brightness, set the time, and format the SD card.
31
Using the Main Menu
Camera On/Off
Use the Camera On/Off menu to show/hide camera channels on the main display screen. For
example, if you disable camera 3, it will not appear in single channel full-screen, Auto Sequence
Viewing Mode, or in Quad mode.
NOTE: If a power failure occurs on your system, you may need to re-configure your Camera
On/Off settings. For more details, see “Appendix G: Power Failure” on page 54.
Camera 1 On
Camera 2 Off
Camera 3 Off
Camera 4 Off
Figure 9.1 Camera On/Off menu
Make sure cameras are properly connected and paired to the receiver before enabling.
To enable/disable cameras:
1. From the Main Menu, select Camera On/Off and press the Enter/OK button.
2. Select the desired camera and press RIGHT/LEFT to select On or Off.
NOTE: The currently selected camera will have On/Off highlighted in RED.
3. Press the Enter/OK button.
4. Press the MENU button to exit.
NOTE: Any disabled channels will be blacked out in Quad mode.
32
Record
Use the Record menu to change image quality, set motion recording time, set a recording
schedule, and enable/disable overwrite.
Figure 10.0 Record menu
The Record menu contains the following sub-menus:
•
Quality: Set the image resolution to 320x240 (QVGA) or 640x480 (VGA)
•
Trigger Record: Set the recording time when motion is detected by a camera
•
Schedule Record: Set start and stop times for Schedule Recording
•
Overwrite: Enable/disable overwrite of the SD card
33
Using the Main Menu
Quality
Figure 10.1 Quality menu — 320x240 (QVGA) and 640x480 (VGA)
To change the image quality:
1. From the Main Menu, select Record and press the Enter/OK button.
2. From the record menu, select Quality and press the Enter/OK button.
3. Press LEFT/RIGHT to select 320x480 (QVGA) or 640x480 (VGA).
4. Press the Enter/OK button to save your settings.
5. Press the MENU button until all menu windows are closed.
VGA or QVGA?
Record at VGA resolution (640x480) for the best video performance or QVGA resolution
(320x240) for a higher video frame-rate.
34
Trigger Record
Use the Trigger Record menu to set the length of the time for the system to record after motion
is detected by a camera.
Figure 10.2 Trigger Record menu
To change the motion recording time:
1. From the Main Menu select Record and press the Enter/OK button.
2. From the Record menu select Trigger Record and press the Enter/OK button.
3. Select 5 seconds, 15 Seconds or 30 Seconds and press the Enter/OK button.
4. Press the MENU button until all menu windows are closed.
35
Using the Main Menu
Schedule Record
Use the Schedule Record menu to set start and stop times for Schedule Recording. During this
time block, the system will record continuously from one specific camera, or from any cameras
in Auto Sequence Viewing Mode.
NOTE: The time uses the 24-hour clock.
Figure 10.3 Recording Schedule
To set a recording schedule:
1. From the Main Menu, select Record and press the Enter/OK button.
2. From the Record menu, select Schedule Record and press the Enter/OK button.
3. Press RIGHT/LEFT to move the cursor (yellow); press UP/DOWN to change the hour and the
minutes.
NOTE: You need to press RIGHT to move the cursor from Start Time to Stop Time.
4. Press the Enter/OK button to save your schedule.
5. Press the MENU button until all menu windows are closed.
6. Disable Manual and Motion Recording on the system.
NOTE: Manual Recording and Motion Recording will override schedule recording. For details, see
“Schedule Recording” on page 23.
NOTE: You cannot enable Schedule Recoding if the system is in Quad Mode. For details, see
“Quad Mode” on page 19.
36
Overwrite
Use the overwrite feature to have the system overwrite the oldest recorded data on the SD card
once the SD card is full.
Figure 10.4 Overwrite enable/disable
To enable overwrite:
1. From the Main Menu select Record and press the Enter/OK button.
2. From the record Menu select Overwrite and press the Enter/OK button.
3. Select Yes and press the Enter/OK button.
4. Press the Menu button until all menu windows are closed.
NOTE: If you do not enable Overwrite, the system will prompt you when the SD card is full
(flashing red icon). Also, when the SD card is full, a blue LED will light up under “FULL” on the
wireless receiver. You will need to manually delete files from the SD card or insert a new SD card
into the wireless receiver. For details, see “Appendix E: Deleting Video Files on the System” on
page 52.
37
Using the Main Menu
Pairing
Use the Pairing menu to “pair’ (add) additional cameras to the system (up to four). By default,
the camera included with your system is automatically paired to channel 1 on the wireless
receiver. The camera and receiver will communicate with one another once they are powered
on.
What is Pairing?
“Pairing” is an electronic handshake between wireless devices. Wireless devices and
components need to be paired in order to communicate with each other.
Pairing will assign each additional camera to a different channel on the wireless receiver.
NOTE: It is highly recommended to pair each additional camera to the wireless receiver prior to
permanently mounting the cameras.
Figure 11.0 Pairing menu icon
38
Figure 11.1 Pairing menu
To pair an additional camera:
1. Connect the camera to a power outlet. DO NOT permanently mount the camera.
2. Press MENU on the wireless receiver or remote control.
3. From the Main Menu, select Pairing and press the Enter/OK button.
4. Select Camera 2, Camera 3, or Camera 4 and press the Enter/OK button.
NOTE: By default, the camera included with your system is paired as Camera 1 (channel 1).
5. Following the on-screen prompt, press the Pair button on the rear panel of the camera. You
have 30 seconds to press the PAIR button on the camera. Once paired, the camera will be
immediately displayed on-screen.
NOTE: If you do not press the Pair button on the camera during the 30 second pairing window,
repeat steps 2~5 to try the pairing process again.
Once the camera is paired you can permanently mount the camera to a desired location.
Cam2
Please Press
Pair Key on
Camera side
30
At the pairing screen, you have 30 seconds to
press the PAIR button on the rear panel of the
camera.
Figure 11.2 Pairing screen
39
Using the Main Menu
Settings
Use the Settings menu to set the system time, change display options, and format the SD card.
Figure 12.0 Settings menu
The Settings menu contains the following sub-menus:
40
•
Date & Time: Set the date and time on the system
•
AV out: Select the TV system for audio/video output
•
Zoom: Set 1X or 2X digital zoom on cameras
•
Brightness: Adjust screen brightness level
•
Format: Format the SD card
•
Default: Restore the system to factory settings
Date & Time
Use the Date & Time menu to set the time and date on the system. You must set the date and
time in order to use Schedule Recording. For details, see “Schedule Recording” on page 23.
2009/07/07
13:35:42
Figure 12.1 Clock Set
To set the date and time:
1. From the Main Menu, select Setting and press the Enter/OK button.
2. From the Setting menu, select Date & Time and press the Enter/OK button.
3. Press RIGHT/LEFT to move the cursor; press UP/DOWN to change the year, month, day,
hour, minutes, and seconds.
NOTE: The system uses a 24-hour clock.
4. Press the Enter/OK button to save your settings.
5. Press the MENU button until all menu windows are closed.
41
Using the Main Menu
AV Out
Use the AV out menu to select the TV system for the wireless receiver.
Figure 12.2 AV out menu
To select the TV system:
1. From the Main Menu, select Setting and press the Enter/OK button.
2. From the Settings menu, select AV out and press the Enter/OK button.
3. Select NTSC (North America) or PAL (UK/Europe) and press the Enter/OK button.
4. Press the MENU button until all menu windows are closed.
42
Zoom
Use the zoom menu to enable 1X and 2X digital zoom on the cameras. While zoomed in, you can
scan the image and view channels in full-screen.
NOTE: Zoom is intended as a temporary setting that is applied to ALL CHANNELS. When you are
finished using zoom, you should return the view to 1X view.
Figure 12.3 Zoom menu
To set the zoom:
1. View camera 1, 2, 3 or 4 in single-channel full-screen.
2. From the Main Menu, select Setting and press the Enter/OK button.
3. From the Settings menu, select Zoom and press the Enter/OK button.
4. Select X 1 or X 2 and press the Enter/OK button.
5. Press MENU until all menu windows are closed. The selected camera will be shown on the
main display in 2X zoom.
While zoomed in you can perform the following:
•
Press LEFT/RIGHT/UP/DOWN to scan the image.
•
Press CHANNEL—M to change channels manually (you can only change channels using
the CHANNEL—M button while zoomed in)
•
Press CHANNEL—A to enable Auto Sequence Viewing Mode
•
Press the Record— button on the remote control or RECORD—M button on the
wireless receiver to start/stop manual recording
•
Press QUAD to view Quad mode – all channels will be zoomed-in
To disable zoom:
1. Open the Zoom menu.
2. Select X 1 and press the Enter/OK button.
3. Press the MENU button until all menu windows are closed.
43
Using the Main Menu
Brightness
Use the Brightness menu to adjust the screen brightness level.
Figure 12.4 Brightness menu
To adjust brightness:
1. From the Main Menu, select Setting and press the Enter/OK button.
2. From the Settings menu, select Brightness and press the Enter/OK button.
3. Press LEFT/RIGHT to increase and decrease the brightness.
4. Press the Enter/OK button to save your settings.
5. Press the MENU button until all menu windows are closed.
44
Format
Use the Format menu to format the SD card. It is highly recommended to format the SD card
prior to initial recording.
ATTENTION: Formatting erases all video data on the SD card. This step cannot be
undone.
Figure 12.5 Format menu
To format the SD card:
1. Insert the SD card into the SD card slot on the right panel of the wireless receiver until you
hear a “click.” Please insert the card according to the diagram on the receiver.
2. From the Main Menu, select Setting and press the Enter/OK button.
3. From the Settings menu, select Format and press the Enter/OK button.
4. Select Yes and press the Enter/OK button. Please allow a few moments for formatting to
finish. Formatting time will vary depending on the size of the SD card.
45
Using the Main Menu
Default
Use the Default menu to restore the system to factory settings.
ATTENTION: Restoring the system to the default factory settings DOES NOT delete
video files on the SD card, nor does it reset the date and time on the system.
Figure 12.6 Default menu
To restore factory settings:
1. From the Main Menu, select Setting and press the Enter/OK button.
2. From the Settings menu, select Default and press the Enter/OK button.
3. Select Yes and press the Enter/OK button.
4. Press the MENU button until all menu windows are closed.
46
Appendix A: System Specifications
General
Description
Specification
Transmission Frequency
Transmission Power
Unobstructed Effective Range
Spread Spectrum
Modulation Mode
Operating Temperature
Operating Humidity
ISM 2,400~2,483.5 MHz
14dBm
450ft. / 150m (line of sight)
FHSS
GFSK
14 ~ 122° Fahrenheit / -10 ~ +50° Celsius
<85%
Camera
Description
Specification
Image Sensor
Total Picture Pixels
Minimum Illumination
Night Vision Distance
View Angle
Power Consumption (Max.)
Power Supply
CMOS
640 x 480 pxl (NTSC)
0 Lux (IR on)
40 ft. / 12 m
Diagonal 55°
Max 350 mA
9V DC
70 mm x 188 mm x195 mm / 2.8” x 7.4” x 7.7”
(with antenna)
0.9 lbs / 0.41 kg
Dimensions
Weight
Receiver
Description
Specification
Supported Resolution
Receiving Sensitivity
Power Consumption (Max.)
Power Supply
640 x 480 @ 10fps or 320 x 240 @ 25fps
-81dBm
280 mA
9V DC
135 mm x 80 mm x 87 mm / 5.3” x 3.2” x 3.5”
(with antenna attached)
0.40 lbs. / 0.18 kg
Dimensions (W x D x H)
Weight (with wireless antenna)
47
Appendix B: About Digital Wireless Technology
Appendix B: About Digital Wireless Technology
The Digital Wireless signal transmission type used by the Lorex LW2301 series is also known as
FHSS –Frequency Hopping Spread Spectrum. This type of signal is highly resistant to
deliberate jamming as it generates a channel hopping sequence using an algorithm generated
by the receiver system.
The 2.4GHz (2.400-2.480Ghz) band is being divided into sections or paths of 2MHz per section,
and each second the transmission signal hops hundreds of times in a specified sequence within
this frequency range. The overall bandwidth required for frequency hopping is much wider then
2MHz however because transmission occurs only on a small section of this bandwidth at any
given time, the signal being transmitted does not suffer from greatly reduced signal
degradation and also avoids blocked paths other devices who act as sources of competing
signals. The strength of the signal being transmitted is set to be from 13.5-16dBm, which is
much higher then the analog transmission signal allowed by authorities around the Globe.
When an image is captured by the camera it is instantly converted from an analog to digital
signal and packaged into small packets. With each successful transmission via the 2 MHz paths
discussed above, the packets of information containing images are delivered to the receiver and
decoded into analog information. The information can then be displayed on devices that are
connected to the wireless receiver (RX).
A device pairing process is required to synchronize the transmitter (TX, Camera) and the
receiver (RX). This allows the transmitter and receiver to be on the same frequency and use the
same algorithm for frequency hopping. This ensures that only the paired transmitter and
receiver can maintain communication signal by hopping to the same frequency paths at the
exact same time. As a result, the chance that other devices within the same frequency range
are on the same frequency, at the same time and in the same order is extremely unlikely. Note
that the pairing process is already done at the factory for products that ship within the same
packaging. Only when add-on devices are purchased is a pairing process required.
48
Appendix C: Adding Cameras
The system comes with a camera that has already been paired to the wireless receiver.
The Pairing Function assigns each camera to a different channel on the wireless receiver (up to
four cameras), and is necessary for configuring additional cameras. By default, the camera
included with the system appears on channels 1 on the wireless receiver.
NOTE: It is highly recommended to pair the cameras to the receiver before permanently
mounting the cameras.
To pair an additional camera:
1. Connect the new camera to a power outlet. DO
NOT permanently mount the camera.
2. Press MENU on the wireless receiver or remote
control.
3. From the Main Menu, select Pairing and press the
Enter/OK button.
4. Select Camera 2, Camera 3, or Camera 4 and
press the Enter/OK button.
NOTE: By default, the camera included with your
system is paired as Camera 1 (channel 1).
5. Following the on-screen prompt, press the Pair
button on the rear panel of the camera. You have
30 seconds to press the PAIR button on the
camera (figure 13.2). Once paired, the camera will
be immediately displayed on-screen.
NOTE: If you do press the Pair button on the
camera during the 30 second pairing window,
repeat steps 2~5 to try the pairing process again.
Figure 13.0 Pairing menu
Cam2
Please Press
Pair Key on
Camera side
30
Once the camera is paired you can permanently
mount the camera to a desired location.
Figure 13.1 Pairing screen
At the pairing screen, you have 30
seconds to press the PAIR button on the
rear panel of the camera.
Figure 13.2
49
Appendix D: Strengthening the Range of the Wireless Signal
Appendix D: Strengthening the Range of the Wireless
Signal
Is your wireless signal choppy? Do you want to extend the range of wireless transmission?
There are several ways to boost your wireless signal as well as options to help you extend the
range of the wireless signal.
DISCLAIMER: Certain accessories are not available in all markets.
Clear Line-of-Sight
The digital wireless signal is virtually interference free. However, you should always ensure
there is a clear line-of-sight between the camera and the receiver.
Clear line-of-sight
Clear line-of-sight
Obstacles
Figure 14.0 Clear line-of-sight between camera(s) and receiver
There should be little to no obstacles obstructing the line-of-sight between the camera and the
receiver. Solid objects, such as concrete and metal may limit the range of the wireless signal.
Extending Your Wireless Signal
Even with a clear line-of-sight between your camera(s) and your receiver, you may experience a
lower video frame rate simply due to the distance between your wireless devices.
Accessory antennas are available that can help extend the range of your wireless signal.
50
2.4 GHZ Directional Wireless Panel Antenna
Use the 2.4GHz Directional Wireless Panel Antenna (model #: ACCANTD9) to focus a wireless
signal onto one specific camera in order to increase range of transmission (clear line-of-sight
between the camera and the antenna is required). A 20 ft. extension cable is included help with
proper position of the antenna.
2.4 GHZ Omni-Directional Wireless Antenna
Use the 2.4GHz Omni-Directional Wireless Antenna (model #: ACCANTO9) to extend the range
and boost the signal of several wireless cameras. You should position the Omni-Directional
Wireless Antenna in an elevated position to provide a clear line-of-sight to the cameras. A 20 ft.
extension cable is included help with proper position of the antenna.
ROOFTOP
FENCE
Visit www.lorextechnology.com for more details on wireless antennas and accessories.
51
Appendix E: Deleting Video Files on the System
Appendix E: Deleting Video Files on the System
You can delete video files on the SD card directly on the system. Deleting files if you need to
clear space on the SD card (if Overwrite is disabled), or for your own file management purposes.
For details, see “Overwrite” on page 37.
..
091252_1
3MB
Del 092532_4? 5MB
YES NO 2MB
094106_1
83MB
100341_3
449KB
Figure 15.0 Deleting files
To delete files on the SD card:
092003_2
5MB
1. From live viewing, press the Enter/OK button. The File menu opens.
2. Select the VIDEO folder and press the Enter/OK button.
3. Select a Date folder and press the Enter/OK button. The file list opens.
4. Select a file and press the Scan/Del button.
5. At the prompt, select YES and press the Enter/OK button. The file is deleted and the File
List returns as normal.
6. Repeat steps 3~5 for other files on the SD card.
NOTE: You cannot delete folders on the SD card using the system.
ATTENTION: Use caution if attempting to delete folders on the SD card using your
computer. Deleting folders may affect your access to other files on the card or may
affect normal operation of the SD card with the system. If you want to delete the
contents of the SD card, it is highly recommended to format the card using the system.
For details, see “Format” on page 45.
52
Appendix F: Estimated Recording Times on SD Cards
Use the table below to help you estimate the recording times on various sizes of SD cards.
Times shown are in hours, minutes, and seconds.
SD Card
Capacity
Standing Recording Time
QVGA 320x240
VGA 640x480
512 MB
1 GB
2 GB
4 GB
8 GB
16 GB
1:20:22
2:32:05
5:02:47
10:15:24
17:58:28
34:54:25
O:54:18
1:46:24
3:47:17
7:02:13
14:05:01
28:10:35
NOTE: The system is compatible with SD High Capacity (SDHC) cards, minimum Class 2.
NOTE: Estimated recording times based on tests using Kingston® brand SD Cards.
53
Appendix G: Power Failure
Appendix G: Power Failure
A power failure may interrupt recording modes on the system. After power is restored, the
following will occur:
ƒ
The system will restart in Auto Sequence Mode + Motion Recording – this ensures that
some form of recording will be immediately active on the system
NOTE: If you had a different display view or recording mode set when the power failure occurred,
you will need to re-apply the previous display view and recording mode.
ƒ
A flashing Power Failure icon will appear on-screen – the Power Failure icon indicates
that a power failure occurred while the system was actively recording (i.e. “REC” icon
was on-screen)
REC
Cam1
160602-1.AVI
Power Failure
icon
2009 07 17
16:32:05
Figure 16.0 Power Failure icon
NOTE: The flashing icon appears only if the system was actively recording when the power failure
occurred. The flashing icon will disappear when you press buttons on the receiver or remote
control.
54
Troubleshooting
If you have problems with your System, there is often a quick and simple solution. Please try the
following:
Problem
There is no picture
from a Camera.
The picture from the
camera is choppy
The Picture is or has
become Choppy
The Picture appears
to be grainy/distorted
The Picture is white
“Err” appears on the
on-screen display
The buttons on the
receiver don’t work
The 1, 2, 3, & 4
buttons do not
change channels
The remote control
does not work
Solution
• Check power to the Camera. Make sure the power adapter is
properly connected
• Make sure that the Cameras and Receiver are both ON.
• Make sure that the camera is in range of the Receiver.
• Make sure that each camera is within range, and that there
are no large obstructions or interference
• Move the camera closer to the receiver
• Try repositioning the camera, receiver or both to improve the
reception.
• The picture may become choppy when experiencing a lower
frame rate (i.e. 10 frames per second vs. a higher 20 frames
per second).
• Try moving the camera closer to the receiver.
• Remove obstructions between the Receiver and Camera
• Try switching to QVGA mode. Resolution will be reduced but
video frame rate will increase
• When using with large screen TV/Monitor (especially highdefinition televisions), the picture might be grainy as the
camera limits video resolution to VGA (640x480 pixels). This
is not a product defect.
• For best performance use with TV/Monitor PIP (Picture in
Picture) function. Check your TV/Monitor product manual to
see if this feature is available on your TV/Monitor
• View video on a smaller screen TV/Monitor
• Consider increasing the range of the wireless signal with an
accessory antenna (see page 50)
• Common situation know as “washout” or “whitewash” where
a strong light source is pointed at the camera lens. The
camera lens IS NOT harmed during a whitewash.
• DO NOT point your camera towards a light source
• The system has encountered an error with the SD card.
Power off the receiver, remove then re-insert the SD card,
and then power the receiver back on
• If “Err” still appears on the OSD, format the SD card
• The Lock may be engaged. On the right panel of the receiver,
slide the lock away from the SD card slot
• If the lock is disengaged but the buttons still do not function,
power the receiver off then power it back on
• The 1, 2, 3, and 4 buttons jump to their respective channels in
Quad Mode ONLY; press the CHANNEL—M button on the
remote control or the receiver to change channels manually
• Replace the battery in the remote control with a fresh
CR2025 battery
55
FAQ
FAQ
Q: What is the maximum distance I can have between the camera and the receiver?
A: Typically 450 feet (137 m) with a clear line of sight in open space, or approximately 150 feet
(46 m) in a house. Walls, studs, furniture will interfere with the range of wireless transmission.
Q: Why does my “wireless camera” have a power cable?
A: The term “wireless” refers to the lack of a video cable between the camera and the receiver.
The camera still requires a power source.
Q: What does 'line-of-sight' mean?
A: 'Line-of-sight' means that there are no obstructions which may interfere with the
transmission of the audio/video signal. Obstructions include items such as walls, buildings and
certain electronic devices.
Q: What is pairing?
A: Pairing is an electronic handshake between digital wireless devices. Pairing allows the
devices to communicate exclusively with each other. The transmission is encrypted and secure.
Q: Can digital wireless cameras be paired to more than one receiver?
A: Digital Wireless cameras can only be paired to one receiver. This is to prevent interception by
3rd parties, and prevents any other device from picking up the signal – this also means that you
cannot pair one camera to multiple receivers.
Q: Can I use 900 MHz and 2.4 GHz systems at the same time?
A: Yes. 900 MHz devices and 2.4 GHz devices will not interfere with one another.
Q: Can I connect analogue 2.4 GHz wireless cameras to the wireless receiver?
A: No, analogue and digital wireless products are incompatible. Visit www.lorexcctv.com for a
full list of cameras and accessories that are compatible with this system.
Q: What does the flashing power-plug icon mean?
A: A power failure occurred while the system was actively recording. When power is restored,
the system will restart in Auto Sequence Mode + Motion Recording to ensure some form of
recording is active on the system. System settings and modes may have been disrupted by the
power failure. Please check all system settings and re-apply any options, recording modes, or
display views if necessary.
Q: Why can’t I open the main menu, change viewing mode, access recordings, or access any
other options while in recording mode?
A: In order to perform any changes on the system while in recording mode, you will need to stop
recording. Recording overrides other actions on the receiver.
56
Q: How do I turn off the Alarm (’beeping’) sound?
A:
By default, the system is set to beep when motion is detected by the camera(s). To turn the
beeping sound off locate the dial on the left side of the receiver marked ALARM VOL and turn it
all the way to the right.
Q: Can I extend the wireless range of the receiver?
A: Yes. There are optional antennas available at lorextechnology.com that help boost wireless
signals.
Q: While in Quad Viewing mode, how can I quickly go to a specific channel?
A: Press the direction button on the remote that refers to the channel number you want to view.
To now view another channel, repeatedly press the M channel button on the remote until you
have reached your desired channel.
Q: What happens to the system during a power failure while in recording mode?
A: power failure may interrupt recording modes on the system. After power is restored, the
following occurs:
• The system will restart in Auto Sequence Mode + Motion Recording. This ensures that
some form of recording will be immediately active on the system.
• A flashing Power Failure icon will appear on-screen. The Power Failure icon indicates
that a power failure occurred while the system was actively recording.
NOTE: If you had a different display view or recording mode set when the power failure
occurred, you will need to re-apply the previous display view and recording mode.
NOTE: The flashing icon appears ONLY if the system was actively recording when the power
failure occurred. The flashing icon will disappear when you press buttons on the receiver or
remote.
IMPORTANT: If a power failure occurs during recording, you may lose video recorded within
ten minutes of occurrence of the power failure if set to Manual or Scheduled Recording.
FAQ
Q: Can I record multiple cameras at the same time?
A: The LW301 can only record one channel at a time.
TIP: Set Trigger Record in the Record menu to 5 seconds (the lowest possible value),
and enable Quad Mode. This allows the system to: a) record a channel for 5 seconds
when motion is detected b) Records the next channel that detects motion for another 5
seconds.
Q: Why can’t I access the main menu while I’m in Quad Mode?
A: You must exit Quad Mode before you can access the main menu. Simply press Quad on the
remote control to exit.
Q: Why isn’t scheduled recording starting?
A:
• Make sure that the SD card is properly inserted into the monitor. Make sure that the SD card
icon appears at the top of the screen.
• Double check that you have set the system time. Press the Menu button to access the main
menu. Then navigate to Setting>Date & Time to set the system time.
• Double check that you have set the start/stop time in the scheduled recording menu.
• Double check that you have turned scheduled recording on.
• You may be in Quad Mode. Exit Quad Mode before starting scheduled recording. Press the
Quad button on the remote to exit.
Q: Can I record in Auto Sequence Viewing Mode?
A: Yes. Set the system to Scheduled Recording. Then set the viewing mode to Auto Sequence.
Note that the recorder only records what it sees on-screen. This means that you will only record
video from a particular channel when it is displayed on the monitor.
Q: Can I set specific days of the week for the system to record?
A: You can only specify to record at a particular time of day (for example, everyday from 9:00
a.m to 5:00 p.m). Note: System utilizes a 24-hour clock (i.e 15:00 is 3:00pm).
Use the Schedule Record menu to set start and stop times for Schedule Recording. During this
time block, the system records continuously from one specific camera, or from any cameras in
Auto Sequence Viewing Mode.
58
Q: Can the system display a 12-hour clock?
A: The unit only displays time in the 24-hour clock format.
Q: Can the system adjust to daylight savings time?
A: There is no daylight savings time (DST) setting on the system. DST must be set manually if
necessary.
Q: Why can‘t I access the saved video files on my memory card?
A: All recording must be stopped on the system before playing back saved video files. This also
applies to Quad or screensaver viewing mode.
Q: When using Manual or Scheduled Recording, why does the system generate so many video
files?
A: The system records video files in 10 minute sessions (ie. 1 hour recording will be divided into
6 separate files.)
The reasons for this are as follows:
• It makes finding events easier/faster in case you know the approximate timing of the event.
• The system needs time to record the video file to the memory card. Every time a new 10
minute session starts, the previous 10 minute session is stored onto the memory card.
Q: How can I view videos on my computer?
A: Remove the memory card from the monitor and insert it into a compatible SD card reader.
If you are using a PC:
• A window will pop-up asking you whether you would like to browse files on the memory
card or launch Windows Media Player™. If the pop-up window does not appear, open My
Computer (Vista: Computer) and find the memory card in the list of drives.
• Find the video file you want to view by looking for the date the event occurred. The file
name convention indicates the date ("090825" means the file was recorded on August 25,
2009). Double-click the file to begin playback in Windows Media Player™ .
• The XviD, DivX, or FFDShow codec may be required if attempting to view the video files in
• Windows Media Player™. You can also view AVI files natively in other media players such
as VLC and DivX Player.
If you are using a Mac:
• The memory card folder will appear on the desktop. Double-click the folder to open.
• Find the video file you want to view by looking for the date the event occurred. The file
name convention indicates the date: "090825" (year (09), month (08), date (25)) means
the file was recorded on August 25, 2009. Double-click the file to begin playback in
Quicktime™ .
• Additional codecs may be required if attempting to view AVI files in QuickTime. VLC
Player is recommended for viewing AVI files on a Mac. VLC is an open-source freeware
application available at www.videolan.org
59
FAQ
60
1 year (Warranted parts do not include Bulbs, LED’s and Batteries)
Lorex does not make any claims or warranties of any kind whatsoever regarding the Product’s potential, ability or
effectiveness to prevent minimize, or in any way affect personal or property damage or injury. Lorex is not
responsible for any personal damage, loss or theft related to the Product or to its use for any harm, whether
physical or mental related thereto. Any and all claims or statements, whether written or verbal, by salespeople,
retailers, dealers or distributors to the contrary are not authorized by Lorex, and do not affect this provision of this
warranty.
This warranty shall not apply to the appearance or accessory items including, but not limited to cabinets, cabinet
parts, knobs etc., and the uncrating, setup, installation or the removal and reinstallation of products after repair.
Lorex reserves the right to make changes in design or to make additions to or improvements in its products
without incurring any obligation to modify any product which has already been manufactured. Lorex will make
every effort to provide updates and fixes to its software via its website. This warranty does not cover any
alteration or damage to any other software that may be or may become resident on the users system as a result
of installing the software provided. This warranty is in lieu of other warranties, express or implied, and Lorex
neither assumes nor authorizes any person to assume for it any other obligation or liability in correction with the
sale or service of the Product. In no event shall Lorex be liable for any special or consequential damages arising
from the use of the Product or arising from the malfunctioning or non-functioning of the Product, or for any delay
in the performance of this warranty due to any cause beyond its control.
This warranty does not cover the performance or functionality of any computer software included in the package
with the Product. This warranty only covers defects in the CD-ROM media such as a broken or a defect in the
CD-ROM that would prevent the CD-ROM from being read by your personal computer’s CD-ROM drive. Lorex
makes no warranty that the software provided with the Product will function without interruption or otherwise be
free of anomalies, errors or ‘Bugs’. Lorex makes no warranty with regard to any software provided with the
Product unless specifically set forth otherwise in a license agreement accompanying such software. This warranty
does not cover any costs relating to removal or replacement of any Product, CD-ROM, or software installed on
your computer.
This warranty does not apply to defects or damages arising by use of the Product in other than normal (including
normal atmospheric, moisture and humidity) conditions or by installation or use of the Product other than in strict
accordance with the instructions contained in the Product’s Owner’s Manual.
This warranty does not apply to defects in or damages to the Product caused by (i) negligent use of the Product,
(ii) misuse, abuse, neglect, alteration, repair or improper installation of the Product, (iii) electrical short circuits or
transients, (iv) Purchaser usage not in accordance with product installation, (v) use of replacement parts not
supplied by Lorex (vi) improper Product maintenance, or (viii) accident, fire, flood or other Acts of God.
Warranty Exclusions
This warranty does not apply to Bulbs, LED’s and Batteries supplied with or forming part of the product.
This warranty is invalidated if other than Lorex accessories are or have been used in or in connection with the
Product or in any modification or repair is made to the Product by other than a service depot authorized by Lorex.
Lorex’s obligations under this warranty shall be limited to
• The repair and or replacement of the product by means of hardware and/or software (at option of Lorex);
• The replacement of any warranted parts found by Lorex to be defective in the Product or, in Lorex’s sole
discretion, the replacement of the Product found be Lorex to be defective.
• If Lorex is unable to repair or replace the Product or CD-ROM, refund the then-current value of the Product.
Any replacement parts furnished by Lorex in connection with this warranty shall be warranted to the Purchaser for
a period equal to the un expired portion of Warranty Period for the Product.
Parts and Labor:
Lorex warrants, to the original retail purchaser only (the “Purchaser”), that this item (the “Product”) if properly used
and installed, and where applicable, the CD-ROM on which the accompanying software is provided, is free from
manufacturing defects in material and workmanship, provided the Product is used in normal conditions and is
installed and used in strict accordance with the instructions contained.
This warranty shall be for the following warranty periods (the “Warranty Period”), commencing on the date the
Purchaser buys the Product at retail in an unused condition.
LOREX PRODUCT LIMITED WARRANTY
Revision 3.0
b.
a.
Always use discretion when installing video and/or audio surveillance equipment especially
when there is perceived privacy. Inquire regarding federal, state and/or local regulations
applicable to the lawful installation of video and or audio recording or surveillance. Party
consent may be required. www.strategicvista.com
TOLL FREE CUSTOMER SUPPORT
North America: 1-888-42-LOREX (1-888-425-6739)
Local: 905-940-5355
International: 800-42-LOREX 0 (800-425-67390)
www.lorexcctv.com
www.lorexinternational.com for return instructions.
ii). If the unit was purchased in Canada proceed as follows:
Please contact our customer service department to obtain a return
authorization number.
Return the unit to:
Lorex Service Center.
250 Royal Crest Court, Markham, Ont. L3R 3S1
iii) If the unit was purchased in Europe please visit:
1 Pack the Product in a well-padded sturdy carton.
2.
i). If the unit was purchased in the United States proceed as follows:
a.
Please contact our customer service department to obtain a return
authorization number.
b.
Return the unit to:
Lorex Returns
c/o Russell Farrow
15 Lawrence Bell Drive, Amherst, NY 14221
In order to obtain service, please make sure that you have registered your product
on-line (www.lorexcctv.com) in the warranty registration section. Should the
Product require service under this warranty, the Purchaser must provide Lorex with
a copy of his/ her original, dated bill of sale; receipt or invoice, failing which Lorex
will not perform any of its obligations under this warranty. If you return the Product
and/or CD-ROM to Lorex, you must assume the risk of damage or loss during
shipment. You must use the original packaging or the equivalent, and you must pay
postage.
To claim on this warranty, proceed with the following steps.
Obtaining Service
The purchaser may have other rights under state, provincial, or federal laws and
where the whole or part of any item of this warranty is prohibited by such laws, it
shall be deemed null and void, but the remainder of the warranty shall remain in
effect.
All expressed and implied warranties are limited in duration to the limited warranty
period. No warranties apply after that period. Some states do not allow limitation on
how long an implied warranty lasts, so this limitation may not apply to you. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above warranty may not apply to you. This limited warranty gives
you specific legal rights and you may also have other rights that vary from state to
state.
Lorex does not warrant that the software will operate with any other software except
that which is indicated. Lorex cannot be responsible for characteristics of third party
hardware or software which may effect the operation of the software included.
Lorex’s responsibility under this, or any other warranty, implied or expressed, is
limited to repair, replacement or refund, as set forth above. These remedies are the
sole and exclusive remedies for any breach of warranty. Lorex is not responsible for
direct, special, incidental, or consequential damages resulting from any breach of
warranty or under any other legal theory including but not limited to, loss profits,
downtime, goodwill, damage to or replacement of equipment and property and any
costs of recovering, reprogramming or reproducing any program or data stored in or
used with a system containing the Product CD-ROM or accompanying software.
Lorex se réserve le droit de modifier la conception ou d'apporter des ajouts ou des améliorations à
ses produits, sans obligation de sa part de modifier les produits déjà fabriqués. Lorex fera tout en
son pouvoir pour fournir des améliorations et des réparations à son logiciel via son site web.
Cette garantie ne couvre pas les altérations ni les dommages effectues tout autre logiciel, ni les
bogues pouvant résider de fa on permanente sur le système de l'utilisateur suite l'installation du
logiciel ci-inclus.
Cette garantie ne couvre pas la performance ni la fonctionnalité de tout logiciel informatique inclus
avec le produit. Cette garantie ne couvre pas les défauts que pourrait contenir le support optique
(disque CD-ROM) ou magnétique (disquette), tel qu'un CD-ROM brisé ou comportant un défaut qui
l'empêcherait d'être lu adéquatement par le lecteur de disque de votre ordinateur. Lorex ne garantit
pas que le logiciel fourni avec le produit fonctionnera sans interruption ni qu'il sera libre de tout
défaut, d'erreurs ou de 'bogues'. Lorex ne garantit pas le logiciel inclus à moins que cela ne le soit
mentionné spécifiquement dans l'entente de la licence incluse avec le produit. Cette garantie ne
couvre pas les frais se rapportant à l'enlèvement ni à la réinsertion de tout produit, logiciel,
périphérique ou disque CD-ROM installé sur votre ordinateur.
Cette garantie ne s'applique pas aux défauts ni aux dommages causés au produit suite à (i) une
utilisation insouciante du produit, (ii) mauvaise utilisation, abus, négligence, modification ou
mauvaise installation du produit, (iii) court-circuits ou transitoires électriques, (iv) tout usage de
l'acheteur qui ne correspond pas à l'installation prescrite du produit, (v) l'utilisation de pièces non
fournies par Lorex, (vi) un entretien inadéquat du produit, ou (vii) tout accident, incendie, inondation
ou autres désastres naturels.
Cette garantie ne s'applique pas aux défauts ni aux dommages survenus suite à une utilisation
anormale du produit (incluant des conditions atmosphériques et des taux d'humidité anormaux) ou
suite à une installation ou une utilisation du produit autre que celle décrite dans le guide
accompagnant le produit.
Exclusions de la garantie
Pour obtenir du service, veuillez vous assurer que vous avez inscrit votre produit en ligne
(www.lorexcctv.com) dans la section d'abonnement à la garantie. Cette garantie ne couvre pas
les ampoules, voyants à DEL ni les piles incluses avec le produit ou faisant partie de celui-ci.
Cette garantie deviendra nulle si des accessoires autres que ceux vendus ou distribués par Lorex
sont utilisés ou ont été utilisés conjointement avec le produit ou si des modifications ou des
réparations ont été effectuées au produit par une entité autre qu'un centre de service autorisé par
Lorex.
Lorex garantit à l'acheteur original (ci-après désigné comme étant "l'acheteur") dans un magasin au
détail seulement, et que ce produit (ci-après désigné comme étant le "produit"), s'il est installé
correctement et - s’il y a lieu - utilisé conformément aux instructions ci-incluses, et le disque CDROM qui comporte le logiciel, seront libres de tout défaut de fabrication, tant dans les pièces que la
main-d'oeuvre, pourvu que le produit soit utilisé dans des conditions normales et installé et utilisé
strictement selon les instructions incluses dans le guide qui l'accompagne.
Cette garantie couvrira la période mentionnée ci-dessous (ci-après désignée comme étant la
"période de garantie"), commençant le jour où l'acheteur se procure le produit à l'état neuf dans un
magasin au détail.
Pièces et main-d'oeuvre :
1 année (les pièces couvertes n'incluent
pas les ampoules, voyants à DEL ni les
piles).
Les obligations de Lorex selon les termes de cette garantie se limitent exclusivement aux points
suivants :
•
Lorex se réserve le droit de réparer ou de remplacer, sa seule discrétion, le logiciel et/ou le
matériel.
•
Le remplacement des pièces sous garantie que Lorex estime être défectueuses dans le
produit ou le disque CD-ROM ou, à sa seule discrétion, le remplacement du produit jugé
défectueux.
•
Si Lorex ne peut réparer ni remplacer le produit ou le disque CD-ROM, rembourser la valeur
monétaire du produit ou du disque CD-ROM en cours au moment de l'achat.
Toutes les pièces remplacées par Lorex seront couvertes pendant la période résiduelle de la
garantie dudit produit.
GARANTIE LIMITÉE DES PRODUITS LOREX
Soyez toujours très discret lorsque vous installez des systèmes de surveillance, surtout dans les endroits plus retirés. Informezvous au sujet des lois et règlements municipaux, provinciaux ou fédéraux qui s’appliquent à l’installation d’appareils de
surveillance audio et vidéo. Il se peut que le consentement de la partie surveillée soit exigé.
COMPOSEZ LA LIGNE D’ASSISTANCE SANS FRAIS AUS CONOMMATEURS:
L'Amérique du nord: 1-888-42-LOREX (1-888-425-6739)
Local : 905-940-5355
International : 800-42-LOREX 0 (800-425-67390)
www.lorexcctv.com
b.
Retournez le produit à :
Lorex Customer Service
250 Royal Crest Court, Markham, ON L3R 3S1
iii) Si l'unité a été achetée dans Europe veuillez visiter : www.lorexinternational.com pour les
instructions de retour
ii) Si l'appareil a été acheté au Canada, suivez ces
étapes-ci :
a. Veuillez contacter notre département de service à la clientèle pour obtenir un numéro
d'autorisation pour le retour.
Obtention du service
Si l'acheteur a besoin de service pour son produit, selon les termes de cette garantie limitée, il doit fournir à Lorex
une copie de la facture d'achat affichant clairement la date et l'endroit où le produit a été acheté. Sans cette
preuve d'achat, Lorex ne sera pas dans l'obligation de remplir ses obligations envers l'acheteur. Si vous retournez
le produit et/ou le disque CD-ROM à Lorex, vous devez assumer le risque que ceux-ci soient endommagés ou
perdus au cours de l'expédition. Vous devez emballer le produit dans sa boîte originale ou un emballage adéquat
et vous devez défrayer les coûts d'expédition à l'une des adresses mentionnées ci-dessous.
Pour bénéficier du service sous garantie, vous devez suivre les étapes ci-dessous :
1.
Emballez le produit dans une boîte solide et remplie de matériau d'expédition.
2.
i) Si l'appareil a été acheté aux États-Unis, suivez ces étapes-ci :
a. Veuillez contacter notre département de service à la clientèle pour obtenir un numéro
d'autorisation pour le retour.
b. Retournez le produit à :
Lorex Returns
c/o Russell Farrow
15 Lawrence Bell Drive, Amherst, NY 14221
Toutes les garanties tacites ou explicites se limitent à la durée de la garantie limitée. Aucune garantie ne sera
applicable après cette période de temps. Certains états ou provinces ne permettent pas de restrictions en ce qui a
trait aux termes d’une garantie tacite, ni d’exclusions aux dommages-intérêts directs ou indirects et il se peut que
ces restrictions ne s'appliquent pas à vous. Cette garantie donne à l’acheteur original des droits spécifiques et il se
peut que d’autres droits, variant d’un état ou d’une province à l’autre, puissent lui être conférés.
Lorex ne garantit pas que ce logiciel fonctionnera conjointement avec tout autre logiciel ou suite logicielle, ˆ
moins que cela ne soit indique. Lorex ne sera pas tenue responsable des caractéristiques ni des fonctions du
matériel ou des logiciels d'un tiers pouvant entrer en conflit avec le fonctionnement du logiciel ci-inclus.
La seule responsabilité de Lorex, selon les termes de cette garantie, qu'ils soient tacites ou explicites, se limite à
une réparation, un remplacement ou un remboursement, selon les clauses décrites dans les présentes. Ces
recours constituent les seuls auxquels a droit l'acheteur pour les bris des clauses de la garantie. Lorex ne sera pas
responsable des dommages-intérêts spéciaux, directs ou indirects, qui résulteraient d'un bris des clauses de cette
garantie ou de toute autre convention législative, incluant mais ne s'y limitant pas, les pertes de profits, pannes de
courant immobilisant des équipements, la valeur ajoutée des biens incorporels, les dommages effectués au produit
et à la propriété ou les coûts reliés à leur remplacement, ainsi que les frais de recouvrement, reprogrammation ou
reproduction d'un programme ou des données stockées dans un système contenant le disque CD-ROM du produit
ou le logiciel qui accompagne celui-ci.
L'acheteur peut bénéficier de certains droits provinciaux ou fédéraux additionnels et toute clause de cette garantie
qui soit prohibée par de telles lois sera jugée nulle et sans effet mais les autres clauses demeureront en vigueur.
Lorex ne garantit pas et ne fait aucune revendication en ce qui a trait au potentiel, à la capacité ou l'efficacité de
prévenir, réduire ou d'une façon quelconque, d'influer sur les dommages à la propriété privée ou sur les blessures
corporelles. Lorex ne sera pas tenue responsable des blessures corporelles, dommages à la propriété
personnelle, perte ni au vol se rapportant de près ou de loin au produit ou son usage dans un cadre malveillant,
qu'il soit physique ou mental. Lorex n'autorise aucunement les représentants, détaillants ou grossistes, à faire des
revendications ou des énoncés de la part de Lorex, tant par voie écrite que verbale et ces énoncés n'influent
d'aucune manière sur les clauses de cette garantie.
Lorex ne garantit d’aucune manière l'apparence extérieure du produit, ni les pièces ou accessoires incluant, mais
ne s'y limitant pas, le boîtier, les pièces du boîtier, les boutons, etc., ainsi que le déballage, l'installation,
l'enlèvement et la réinstallation du produit après une réparation.
Cette garantie a préséance sur toutes les autres garanties tacites ou explicites, incluant la garantie en qualité
loyale et marchande et les aptitudes visant toute autre obligation ou responsabilité de la part de Lorex, et par les
présentes, Lorex n’autorise aucune personne ni entité à assumer pour elle nulle autre responsabilité en rapport
avec la vente de ce produit. Lorex ne sera pas tenue responsable, en aucune circonstance, des dommagesintérêts directs ou indirects survenant de l'utilisation du produit ou suite au mauvais fonctionnement ou à l'absence
de fonctionnement dudit produit, ainsi que pour tout délai dans l'exécution de cette garantie suite à des
circonstances hors du contrôle de Lorex.
Esta garantía no se aplicará a la apariencia o artículos accesorios incluyendo, sin estar limitado a ellos,
gabinetes, piezas de gabinetes, perillas, etc., y el desembalaje, instalación, configuración, o remoción y
reinstalación del producto después de ser reparado.
Esta garantía no cubre el rendimiento o funcionalidad de ningún software de computadora incluido en el paquete
con el Producto. Esta garantía sólo cubre defectos en el material de CD-ROM, tal como roturas o defectos en el
CD-ROM que impida que sea leído por la unidad de CD-ROM de su computadora personal. Lorex no garantiza
que el software provisto con el Producto funcione sin interrupción o que de otra forma esté libre de anomalías,
errores o “bugs”. Lorex no ofrece ninguna garantiza con respecto a algún software provisto con el equipo a
menos que específicamente se establezca de otra forma en un acuerdo de licencia que acompañe a dicho
software.
Esta garantía no cubre ningún costo relativo a la remoción o reemplazo de algún Producto, CD-ROM, o software
instalado en su computadora.
Lorex se reserva el derecho de hacer cambios en el diseño o hacer adiciones o mejoras a sus productos sin
incurrir en ninguna obligación de modificar algún producto que ya haya sido fabricado.
Lorex tratará en lo posible de proporcionar actualizaciones y arreglos a su software por medio de su página en la
red.
Esta garantía no cubre ninguna alteración ni daño a algún otro software que pueda ser instalado o pueda quedar
instalado en el sistema del usuario como resultado de la instalación del software provisto.
Esta garantía es el reemplazo de otras garantías, expresas o implícitas, y Lorex no asume ni autoriza a ninguna
persona a asumir por ella ninguna obligación en relación con la venta o servicio del producto. En ningún caso
Lorex será responsable por ningún daño o perjuicio especial o consecuente resultante del uso del Producto o de
su mal funcionamiento o incapacidad de funcionar, o por cualquier demora en la atención de esta garantía
debida a causas fuera de su control.
Esta garantía no se aplica a defectos o daños al Producto causados por (i) uso negligente del Producto, (ii) mal
uso, abuso, negligencia, alteración, reparación o instalación incorrecta del Producto, (iii) cortocircuitos o
corrientes eléctricas transitorias, (iv) uso por el Comprador que no está de acuerdo con la instalación del
producto, (v) uso de piezas de repuesto no suplidas por Lorex (vi) inadecuado mantenimiento del Producto, o
(vii) accidente, incendio, inundación u otros accidentes naturales.
Esta garantía no se aplica a defectos o daños resultantes del uso del producto en condiciones diferentes a las
normales (incluyendo condiciones atmosféricas o de humedad normales) o por la instalación o uso del Producto
en forma distinta a seguir estrictamente las instrucciones contenidas en el Manual del Propietario del Producto.
Exclusiones de la garantía
Esta garantía no se aplica a las bombillas, LEDs y baterías suministradas con el producto o que formen parte del
mismo.
Esta garantía quedará nula si se han usado accesorios que no son Lorex en el Producto o en relación con el
mismo o si se hace alguna modificación o reparación al Producto en algún taller que no sea un local de servicio
autorizado por Lorex.
Esta garantía no se aplica a defectos o daños resultantes del uso del producto en condiciones diferentes a las
normales (incluyendo condiciones atmosféricas o de humedad normales) o por la instalación o uso del Producto
en forma distinta a seguir estrictamente las instrucciones contenidas en el Manual del Propietario del Producto.
Exclusiones de la garantía
Esta garantía no se aplica a las bombillas, LEDs y baterías suministradas con el producto o que formen parte del
mismo.
Esta garantía quedará nula si se han usado accesorios que no son Lorex en el Producto o en relación con el
mismo o si se hace alguna modificación o reparación al Producto en algún taller que no sea un local de servicio
autorizado por Lorex.
Lorex garantiza, sólo al comprador original al por menor (el “Comprador”) que este artículo
(el “Producto”), si se usa e instala debidamente, y – si hay lugar - el CD-ROM en el que se proporciona el
software asociado, está libre de defectos de fabricación en materiales y mano de obra, sujeto a que el Producto
sea usado en condiciones normales y que sea instalado y usado estrictamente de acuerdo con las instrucciones
contenidas.
Esta garantía será para los siguientes períodos de garantía (el “Período de Garantía”), a partir de la fecha en que
el Comprador adquiera el Producto al por menor en la condición de no haber sido usado previamente.
Repuestos y Mano de Obra:
1 año (Las piezas garantizadas no incluyen bombillas, LEDs y baterías)
Las obligaciones de Lorex bajo esta garantía estarán limitadas a:
•
la reparación o el reemplazo del producto por medio de hardware y/o software (a opción de Lorex).
•
el reemplazo de cualquier parte garantizada que Lorex determine que está defectuosa en el Producto o
CD-ROM o, por decisión única de Lorex, al reemplazo del Producto que Lorex encuentre defectuoso.
•
Si a Lorex no le es posible reparar o reemplazar el Producto o el CD-ROM, se devolverá el valor vigente
en ese momento del Producto o CD-ROM.
Se garantizará al Comprador cualquier pieza de repuesto provista por Lorex en conexión con esta garantía por
un período igual a la parte no vencida del Período de Garantía del Producto.
GARANTÍA LIMITADA DEL PRODUCTO LOREX
b.
a.
b.
1.
2.
a.
Use siempre discreción cuando instale equipo de vigilancia por video y/o audio especialmente cuando se
percibe privacidad. Consulte acerca de las regulaciones federales, estatales y /o locales aplicables a la
instalación legal de equipos de grabación o vigilancia por video y/o audio. Puede requerirse el
consentimiento de las partes.
www.lorexcctv.com
NUMERO GRATUITO DE SERVICIO A CLIENTES:
Norteamérica: 1-888-42-LOREX (1-888-425-6739)
Internacional: 800-42-LOREX 0 (800-425-67390)
Local : 905-940-5355
iii) Si la unidad fue adquirida en Europa y desea devolver el producto por favor visite:
www.lorexinternational.com para obtener instrucciones.
ii). Si la unidad fue comprada en Canadá proceda en la siguiente forma:
Para devoluciones por favor contacte nuestro departamento de servicio para obtener un número de
autorización.
Devuelva la unidad a:
Lorex Customer Service.
250 Royal Crest Court, Markham, Ont. L3R 3S1
Empaque el Producto en una caja robusta bien acolchada.
i). Si la unidad fue comprada en Estados Unidos proceda en la siguiente forma:
Para devoluciones por favor contacte nuestro departamento de servicio para obtener un número de
autorización
Devuelva la unidad a:
Lorex Returns
c/o Russell Farrow
15 Lawrence Bell Drive, Amherst, NY 14221
Con el fin de obtener servicio, por favor asegúrese de registrar haber registrado su producto en nuestra pagina
web www.lorexcctv.com en la sección de registro de garantía. Si el Producto necesitase servicio bajo esta
garantía, el Comprador debe hacer llegar a Lorex una copia del recibo o factura de compra, con su fecha
respectiva, sin lo cual Lorex no estará obligada a cumplir con ninguna de sus obligaciones bajo esta garantía. Si
devuelve el Producto y/o el CD-ROM a Lorex, debe usted asumir el riesgo de daño o pérdida durante el envío.
Debe usar el envase original o equivalente y debe pagar el flete.
Para hacer un reclamo bajo esta garantía, proceda con los siguientes pasos.
El comprador puede tener otros derechos de acuerdo con las leyes federales, provinciales o estatales y cuando
toda esta garantía o parte de la misma sea prohibida por dichas leyes, será considerada nula, pero el resto de la
garantía permanecerá vigente.
Todas las garantías expresadas e implícitas están limitadas en duración al período de garantía limitada. Ninguna
garantía se aplicará después de dicho período. Algunos estados no permiten limitación a la duración de una
garantía implícita, de modo que esta limitación puede no serle de aplicación. Algunos estados no permiten la
exclusión o limitación de daños y perjuicios incidentes o consecuentes, por lo que la garantía anterior puede no
serle de aplicación. Esta garantía limitada le otorga derechos legales específicos y usted puede también tener
otros derechos que varía de un estado a otro.
Cómo obtener servicio
Lorex no garantiza que el software operará con ningún otro software excepto con el que se indica. Lorex no
puede ser responsable de las características de hardware o software de terceras personas que puedan afectar la
operación del software incluido.
Lorex no hace ninguna de cada declaración ni garantía de ninguna clase con respecto al potencial, capacidad o
eficacia del Producto para evitar, minimizar o en alguna forma afectar a los daños o lesiones personales o a la
propiedad. Lorex no es responsable por ningún daño personal, siniestro o robo relacionado con el Producto o a su
uso para cualquier daño, sea físico o mental relacionado con el mismo. Cualquier afirmación o declaración, sea
escrita o verbal, hecha por vendedores, minoristas o distribuidores en sentido contrario no es autorizada por
Lorex y no afecta esta disposición de esta garantía.
La responsabilidad de Lorex según ésta o cualquier otra garantía, implícita o explícita, está limitada a la
reparación, reemplazo o reembolso, como se establece anteriormente. Estas compensaciones son el único y
exclusivo remedio por cualquier incumplimiento de garantía. Lorex no es responsable por daños y perjuicios
directos, especiales, incidentes, o consecuentes resultantes de algún incumplimiento de garantía o bajo cualquier
otra teoría legal, incluyendo pero sin estar limitada a: pérdida de utilidades, paralización, plusvalía, daños o
reemplazo de equipos y propiedad y cualquier costo de recuperar, reprogramar o reproducir cualquier programa o
datos almacenados o usados con un sistema que contenga el CD-ROM del Producto o el software que lo
acompaña.
CONNECT . PROTECT
Enhance your security with genuine Lorex Cameras, Digital Video Recorders,
Integrated Systems and Accessories. Order whatever you need at
www.lorextechnology.com
Warehouse
CVC6998HR
LNZ4001
Restaurant
Convenience Store
LW2100
VQ1536HR
PROTECT EVERYTHING
THAT MATTERS
Day Care
Home Office
Add wired or wireless cameras to expand the
“Envelope of Protection” for your business,
your home and your family
LW2702
Drive Way
SG7540
10052010-R12
Office
Front Door
LW2301
Nursery
LW2002W
LW2002B
Backyard
LW2201
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement