Soundsation REALKIT-TOUCH Electronic drum kit User Manual

Add to my manuals
32 Pages

advertisement

Soundsation REALKIT-TOUCH Electronic drum kit User Manual | Manualzz

DIGITAL DRUM KIT

USER MANUAL

Please read this manual carefully and proper take care of this manual.

ENGLISH

Dear customer,

First of all thanks far purchasing a SOUNDSATION® product. Our mission is to satisfy all possible needs of musical instrument, professional audio and lighting users offering a wide range of products using the latest technologies.

We hope you will be satisfied with this item and, if you want to collaborate, we are looking for a feedback from you about the operation of the product and possible improvements to introduce in the next future. Go to our website www.soundsationmusic.com

and send an e-mail with your opinion, this will help us to build instruments ever closer to customer’s real requirements.

One last thing: read this manual before using the instrument, an incorrect operation can cause damages to you and to the unit. Take care!

The SOUNDSATION Team

2

ENGLISH

TABLE OF CONTENTS

1. INSTALLATION ........................................................................................................7

1.1. Rack System .........................................................................................................................7

1.2. Rack Installation ....................................................................................................................8

1.3. Components Installation ........................................................................................................9

2. SOUND MODULE ..................................................................................................10

2.1. Control Panel.......................................................................................................................10

2.2. Rear Panel ..........................................................................................................................12

3. PLAYING PAD ........................................................................................................14

4. BEFORE STARTING PERFORMANCE .................................................................15

5. BASIC OPERATION ...............................................................................................16

6. SETUP ....................................................................................................................19

7. DRUM KIT EDIT .....................................................................................................22

8. WARRANTY AND SERVICE ..................................................................................24

9. WARNING .............................................................................................................24

10. APPENDIX .............................................................................................................25

10.1. Drum Kit List ........................................................................................................................25

10.2. Pattern List ..........................................................................................................................25

10.3. Voice List (1)........................................................................................................................26

10.4. Voice List (2)........................................................................................................................27

10.5. Voice List (3)........................................................................................................................28

11. SPECIFICATIONS ..................................................................................................30

3

ENGLISH

REALKIT-touch User manual

IMPORTANT SAFETY SYMBOLS

WARNING:

CAUTION:

The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or death.

The symbol is used in the service documentation to indicate that specific component shall be replaced only by the component specified in that documentation for safety reasons.

Protective grounding terminal

Alternating current/voltage

Hazardous live terminal

Denotes the apparatus is turned on

Denotes the apparatus is turned off

Describes precautions that should be observed to prevent the danger of injury or death to the operator.

Describes precautions that should be observed to prevent danger of the apparatus.

TAKING CARE OF YOUR DRUM

f Read these instructions f Keep these instructions f Heed all warning f Follow all instructions

Water / Moisture

The apparatus should be protected from moisture and rain and can not be used near water; for example near a bathtub, a kitchen sink, a swimming pool, etc.

Heat

The apparatus should be located away from heat sources such as radiators, stoves or other appliances that produce heat.

4

ENGLISH

REALKIT-touch User manual

Ventilation

Do not block areas of ventilation opening. Failure to do could result in fire. Always install according to the manufacturer's instructions.

Object and Liquid Entry

Objects do not fall into and liquids are not spilled into the inside of the apparatus for safety.

Power Supply

In case of external power supply, the apparatus should be connected to the power supply only of the type as marked on the apparatus or described in the manual. Failure to do could result in damage to the product and possibly the user. Unplug this apparatus during lightning storms or when unused for long periods of time.

Electrical Connection

Improper electrical wiring may invalidate the product warranty.

Cleaning

Clean only with a dry cloth. Do not use any solvents such as benzene or alcohol.

Servicing

Do not implement any servicing other than those means described in the manual. Refer all servicing to qualified service personnel only. Only use accessories/attachments or parts recommended by the manufacturer.

Warning

Please remember the high sound pressure do not only temporarily damage your sense of hearing, but can also cause permanent damage. Be careful to select a suitable volume.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Also, this equipment has been tested and found to comply with the limits for following standard:

EN55022-2006

EN55024:1998/+A1:2001/+A2:2003

EN55013:2001/+A1:2003/+A3:2006

EN55020:2007

EN61000-3-2:2006

EN61000-3-3:1995/+A1:2001/+A2:2003

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

5

ENGLISH

REALKIT-touch User manual that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: f Reorient or relocate the receiving antenna.

f Increase the separation between the equipment and receiver.

f Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

f Consult the dealer or an experienced radio/TV technician for help.

6

ENGLISH

REALKIT-touch User manual

1. INSTALLATION

CRASH1

CRASH2

HI-HAT

SOUND MODULE

SNARE

TOM1

TOM2

KICK

TOM3

HI-HAT CONTROL PEDAL

KICK PEDAL

Drum-kit after installation

Each drum pad, cymbal pad and Hi-Hat control pedal has its part number underneath the component name for your reference in installation. The part number is also printed on the part packing box. Power adapter and connection cables are not shown in the drawing.

1.1. Rack System

L

Folded rack in package

R

7

ENGLISH

REALKIT-touch User manual

Cymbal Holders are contained separately in the package.

This is the view of all separated parts. Match each part to its number and set up the drums according to the diagram on next page. (4) are spare parts.

Note: Please note that the Kick-drum and Hi-Hat control pedals are also packaged in the box.

1.2. Rack Installation

2

2

1

L

3 R

3

1. Combine the drum rack with support legs (3). On the right side you need to install a (4) to insert the leg. Be aware (4) is slightly different with (5), you need the one

8

ENGLISH

REALKIT-touch User manual with wing nuts here.

2. Make the drum rack steady and adjust all the positions according the diagram below. Then fasten all wing nuts.

3. 3.Add (1) and (2) to their clamps accordingly and adjust their position.

1.3. Components Installation

3

1

2

2

3

1

Cymbal Installation

1. Remove the wing nut, washer and felt pad from the top of the rod.

2. Put the cymbal pad into the rod, then place back parts removed in the step 1. Fasten the wing nut but not too tightly. It allows the pad a little bit wobbling like real acoustic cymbal.

3. Adjust the pad position then re-tighten the wing nut.

Snare and TOM Installation

1. Adjust the support hex rod to suitable position.

2. Loosen the bottom wing nut of the pad and insert it to the support hex rod. Push the wing nut up a little bit and shake the pad to insert it successfully.

3. Fasten the bottom wing nut after the pad is adjusted to the suitable position.

Kick Installation

1. Align holes in the support stand (1) and pad (2), then insert bolts and fasten with drum key (attached).

2. Insert tongue (3) of the kick stand into slot of the pedal. Adjust to a suitable position, and then fasten the wing nut on the kick pedal.

Sound module Installation

1. Align holes in the sound module and module mount then insert screws and fasten it.

2. Insert rod of the supporting board into the clamp, then tighten the wing nut.

Finalizing the Installation

After install all components, fine adjust the arm, clamps and rods to the best position you desire.

Electronic Connection

Connect the trigger connector cable plug to the bottom of the sound module, and then connect all cable heads according to their name tags.

9

ENGLISH

2. SOUND MODULE

2.1. Control Panel

REALKIT-touch User manual

1 2

3 4 5 6

7

8 9

1. MASTER VOL. - Adjust the output level of LINE OUT. Rotate it clockwise to increase volume.

2. HEADPHONE VOL. - Adjust the output level of HEADPHONE , rotate it clockwise to increase volume.

3. PAGE DOWN - Switch to next option in current menu.

4. PAGE UP - Switch to last option in current menu.

5. ENTER - Proceed to sub-menu or to confirm operation.

6. EXIT - Proceed to root menu or to cancel operation.

7. SCROLL WHEEL - Turn this wheel to increase or decrease values or change kits quickly. Rotate it clockwise to increase.

8. MIXER & 9. ALTER - Use ALTER button to switch 3 fader modes.

In VOL mode: S1-S6 are used to control volume of kick, snare, toms, ride, crashes, hi-hats, and also their rim or edge volume.

In FX mode: S1 controls kit reverb level. Reverb type can be selected in FX

SET menu. S2 controls kit compression ratio. Threshold can be set in FX SET menu. S3-S6 control the gain of a 4-band equalizer.

Frequency can be set in FX SET menu. See the SETUP chapter for more information.

10

ENGLISH

REALKIT-touch User manual

In MIDI mode: S1-S6 are assigned to 6 different midi controller. They can be used to control track volume or effects on computer. Controller number can be set in MIDI SET menu (See chapter SETUP).

10 11

13 14

12

15

16

10. KIT - Press this button to engage kit mode. You can use -/+ button (16) or scroll wheel (7) to select a kit in this mode.

11. PATTERN - Press this button to engage pattern mode, where you can play demo patterns, exercise with patterns or do some drum recording.

12. EDIT - Press EDIT button to edit the current drum kit, including voice type, voice, volume, reverb level, pitch and pan. (See EDIT chapter).

13. SETUP - Press SETUP button to adjust system settings, including BACK VOL-

UME, MASTER TUNE, LOCAL, FX SET, MIDI SET, ADVANCE and RESET. (See

SETUP chapter).

14. MODE - Change playing modes for demo patterns.

Play One Play a single pattern once.

Repeat One Loop a single pattern.

Play All Play all patterns once.

Repeat All Loop all patterns.

15. METRO - Press this button to set metronome on/off, volume, tempo, time signature and voice. Use PAGE DOWN/UP to switch between options.

11

ENGLISH

REALKIT-touch User manual

16. -/+ - Use these two buttons to decrease or increase values and settings. Also you can select a kit using these buttons.

17

19

18

20 21 22

17. DRUM - Press this button to mute the drum track of a demo pattern.

18. ACCOMP - Press this button to mute accompaniment tracks of a demo pattern.

19. TEMPO - Tap this button at a desired rate to get a new tempo for demo pattern and metronome after you have tapped it four times. You can also change the tempo using scroll wheel (7) or -/+ button (16) after you have pressed TEMPO button.

20. - Pauses playback of the current demo pattern, press it again to cancel playing current pattern.

21. - Plays the current demo pattern.

22. - Record a drum sequence. You can use STOP button (20) to pause recording.

Press STOP button (20) again to finish recording and save the sequence to a user song. Press ENTER to confirm. You can also record along with a demo pattern in

PATTERN mode.

2.2. Rear Panel

DC 12V

12

23 24 25 26 27 28 29 30 31

ENGLISH

REALKIT-touch User manual

23. HEADPHONE - Connect your headphone to this 1/8” TRS output.

24. LINE OUT L/MONO - Left channel of main output. Connect this output to any amplifier using 1/4” TS cable. For mono output, please connect this socket only.

25. LINE OUT R - Right channel of main output. Connect this output to any amplifier using 1/4” TS cable. For stereo output, please connect both LINE OUT L/MONO

(2) and LINE OUT R (3).

26. LINE IN - Analog input socket of the sound module, 1/8” TRS.

TIPS - An extra 1/8” male to male cable will be needed if you want connect your sound module to any sound source such as iPod, iPad,CD player, mobile phone or computer. Play and practice with your favorite music.

27. EXT1 - Extended trigger socket 1, connect to Crash2 by default.

28. EXT2 - Extended trigger socket 2, connect to Tom4 by default.

29. USB - Connect standard B type USB cable to this socket for updating firmware, gaming, recording MIDI and using plug-ins for more sound on computer.

TIPS - Connect USB2.0 A male to B male cable to this socket, such cable is very common in home printers.

30. DC 12V - Connect the attached DC 12V power adapter to this socket.

31. POWER - Turns the module on and off.

TRIGGER INPUTS - Trigger inputs socket is located at the bottom of sound module.

Connect the multi-trigger connector (AKA 25pin connector) to this socket and lock it.

13

ENGLISH

REALKIT-touch User manual

3. PLAYING PAD

All pads have striking force sensitivity feature. Strike the pad harder to make higher volume and strike the pad softer to make lower volume.

Playing Tom drum

Strike the central position (head) of the pad to make head sound, strike the rim of the pad to make rim sound.

Playing Cymbal

Strike the central position (bow) of the cymbal to make cymbal bow sound, strike the edge of the cymbal to make edge shot sound.

Bow

Playing Hi-Hat

1. Strike the Hi-Hat pad without pressing the Hi-Hat control pedal to make open Hi-Hat sound.

2. Strike the Hi-Hat pad with fully pressing the Hi-Hat control pedal to make close Hi-Hat sound.

3. In certain position while you press the Hi-Hat control pedal, playing

Hi-Hat cymbal will trigger half open sound.

4. Press the Hi-Hat pedal down quickly to make Hi-Hat pedal chick sound.

5. Press and release the Hi-Hat pedal down very quick to make Hi-Hat foot splash sound.

Cymbal Choke

Strike a cymbal, its sound will sustain.

Then squeeze the edge portion to mute the sound. Please note that the Hi-Hat has no choke feature.

Playing Kick Drum

Press the Kick drum pedal to make a kick drum sound.

Playing Snare Drum

Strike the central position (head) of the pad to make head sound, strike the rim of the pad to make rim sound. The rim triggering is velocity layered.

14

REALKIT-touch User manual

4. BEFORE STARTING PERFORMANCE

ENGLISH

• Make sure the drum kit is stable and all the parts are well locked.

• Connect all the cables to the drum module according to their tags.

• Connect the multi-trigger connector to its socket at the bottom of the sound module and lock it.

• Power the sound module up.

Due to the difference of installation and environment, if cross talk problem occurs, please follow the following procedures.

• Press SETUP button.

• Press the PAGE DOWN/UP button until the sub menu ADVANCE appears.

• Press ENTER button to confirm, then press the

PAGE DOWN/UP button to select item of Xtalk.

• Strike a pad you desire with maximum strength repeatedly until “OK” is shown on the screen.

• Then change to another pad and repeat the third procedure (Not including Hi-hat Pedal).

• Also, you can set the HEADROOM (aka Velocity

Dynamic range) of each pad. To reach a loud sound easier, simply lower the HEADROOM value.

15

ENGLISH

REALKIT-touch User manual

• Press EXIT to quit, when “Save Setups” appears, press ENTER to confirm or select No to cancel saving . The display will show “Save OK” after saving.

Note All the system settings in SETUP is global parameter, they will affect all the kits and can be saved even when rebooted. If the adjustment result is not good, do a crosstalk reset according to next pages.

5. BASIC OPERATION

TO SELECT A KIT

• Press kit on the control panel and use the scroll wheel or -/+ button to select a kit.

Select or Change

Tempo Time signature

KIT 120 4/4

Rocker 1

Kit name Kit No.

Tip: While adjusting parameters, you can change its value by using -/+ buttons or scroll wheel also.

Part to edit

S N A R E -R i m

VOICE TYPE SNARE

Voice category

TO EDIT A KIT

• Press EDIT to enter EDIT MODE, where you can assign different voices and adjust other parameters to make your own kit. Strike on different part on each pad to select among triggers, or use DRUM button to switch between drum instruments.

• Use PAGE DOWN/UP to enter VOICE TYPE menu and use scroll wheel or -/+ button to choose a voice category. Choose “---” for a blank voice.

16

ENGLISH

REALKIT-touch User manual

• Use PAGE DOWN/UP to enter VOICE menu and use scroll wheel or -/+ button to choose a voice within the selected category referring to Voice List in <APPEN-

DIX>

S N A R E -R i m

VOICE R o c k R

Voice name

Tip: The meaning of shortened voice names: R stands for Rim shot, X for

Cross stick, E for Edge, B for Bell, C for Close, O for Open, Half for Half

Open, P for Pedal Chick, Sp for Pedal Foot Splash.

• Use PAGE DOWN/UP to enter VOLUME menu to adjust the volume level for a single trigger.

S N A R E -R i m

VOL U M E 8 0

• Press EXIT to quit the current menu and select a place to save it using +/- button. You can either save it to a preset kit or a user kit if you don’t want to overwrite the preset kit. Press ENTER again to confirm or press EXIT to cancel.

S a v e K i t s t o

R o c k e r

----S a v e O K ----

--------------------

TO PLAY A DRUM PATTERN (DEMO SONG)

• Press PATTERN button, use scroll wheel or -/+ button to select a demo, and use the play and stop

buttons to play a demo. The display shows information about demo.

Playing status Tempo Time Signature

S O N G 1 2 0 4 / 4

0 1 W a l k W i t h T r e e

Song Number Song Name

• Press METRO button, use -/+ button or scroll wheel to activate metronome. Use PAGE DOWN/UP to adjust metronome volume, tempo, time signature and sound.

• Tap tempo button at a desired rate to get a new tempo. You can also change the tempo by scroll wheel or

-/+ button after you press tempo button.

• Don’t need the drum track in the demo pattern?

Simply press DRUM button to mute it. You can also press ACCOMP button to mute other accompaniment tracks.

17

ENGLISH

REALKIT-touch User manual

TO RECORD A DRUM TRACK

• Press the record button in KIT mode, set the tempo for recording, and press the record button again to start recording.

• Use stop button to pause your recording. You can either press play button to continue recording or press stop button to finish and save your recording.

• While saving your recording, on the screen will show

”Save the song to”, use scroll wheel or -/+ button to locate the place for saving, and press enter to confirm.

• If you are in PATTERN mode, you can record along with demo song.

TO USE THE MIXER

• Press the ALTER button to switch between 3 modes for faders. In VOL mode, all the faders control the volume of different pads.

• In FX mode, S1 controls reverb level, S2 controls compression ratio, and S3-S6 change to a 4-Bank equalizer.

• In MIDI mode, 6 faders are assigned to 6 different controllers. You can use them to control track volume or various effects in any DAWs or plug-ins.

TO RESTORE FACTORY SETTINGS

• Press SETUP, and use PAGE DOWN/UP to locate

RESET menu.

• Use -/+ or scroll wheel to select what you want to restore.

Kits: Initialize all the kits, including user kits.

Settings: Initialize all system settings.

Xtalk: Initialize cross talk to default.

Songs: Initialize all user patterns.

All: Initialize everything to factory settings.

• Press ENTER to confirm. The screen will show RE-

SET OK.

• Reboot the module to complete.

18

S E T U P

R E S E T K i t s

----R e s e t O K ----

--------------------

ENGLISH

REALKIT-touch User manual

6. SETUP

Press on the SETUP button to advance to system settings. Use PAGE DOWN/UP to select an item to set.

S E T U P

B A C K V O L U M E 5 3

Change parameter directly

If the item with blinking parameter, use -/+ button or scroll wheel to change it directly. If the item has ==> mark after, press the ENTER button to enter the sub-menu for further options.

S E T U P

M I D I S E T = = >

Press ENTER to enter the sub-menu

After setting, press the EXIT to exit and the screen shows

“Save Setup”. Press the ENTER to save or press the

EXIT to give up.

All items can be setup are:

BACK VOLUME

Controls the volume of demo patterns and loops.

S E T U P

B A C K V O L U M E 5 3

MASTER TUNE

Controls the overall pitch. It is A4, 440Hz by default.

S E T U P

M A S T E R T U N E 0

LOCAL

Decides whether the module read the sound files or not. If switched to OFF, the sound module will function as a midi drum, which produce no sound but send MIDI messages.

S E T U P

L O C A L O N

TIPS: If you want to connect the sound module to computer for gaming or using drum plug-ins, switch LOCAL to OFF will lower latency.

FX SET

S E T U P

F X S E T = = > Set the function of faders in FX mode. You can either slide the fader or use PAGE DOWN/UP to switch between options.

19

ENGLISH

REALKIT-touch User manual

Reverb Type: Select reverb type for reverb effect controlled by S1.

Dist.Pst: Select distortion type. Select OFF to disable distortion. Distortion effect can only be selected here.

Threshold: Select the threshold for Compressor/Limiter controlled by S2. Decrease this value by certain amount may avoid clipping.

LowFrq: Set low frequency point, which is controlled by S3. Shelf type, the value is at the middle position on slope.

F X S E T

Re ve rb Ty pe R OO M1

LoMiFrq: Set low mid frequency point, which is controlled by S4. Bell type, the value is at the center of bell curve.

HiMiFrq: Set high mid frequency point, which is controlled by S5. Bell type, the value is at the center of bell curve.

HighFrq: Set high frequency point, which is controlled by S6. Shelf type, the value is at the middle position on slope.

Note: In some cases, the value of the fader is not match to its actual position. For situation like this, the fader will be activated until its actual position has reached is value shown on screen.

MIDI SET

S E T U P

M I D I S E T = = >

Assign controller and channel for each fader in MIDI mode. You can either slide the fader or use PAGE DOWN/

UP to switch between options.

S L I D E R 3 M I D I

C o n t r o l l e r 1 3

S L I D E R 3 M I D I

C h a n n e l 3

ADVANCED SETTINGS

S E T U P

A D V A N C E = = >

Includes all the physical settings for pads/triggers.

20

ENGLISH

REALKIT-touch User manual

Sensitivity: The higher the value is, the easier it will be to trigger. But if this value is too high, will cause some crosstalk problems.

T O M 1 A D V

S e n s i t i v i t y 7 7

Headroom: Set the velocity dynamic range. This value is the velocity needed to get max volume, so the lower the value is, the easier to get louder sounds.

T O M 1 A D V

H e a d r o o m 8 7

TIPS: You can use the faders to adjust the volume quickly, but it will not be saved if you power off the sound module.

The concept of Headroom is essentially different from Volume. Headroom decides the velocity to reach the max volume, but cannot change the max level of volume.

SenseTime: Sets the interval between two triggering.

Increase this value by certain amount may avoid being triggered multiple times by vibration in very short time.

Trigger: Sets the velocity curve for pads, including

Linear, EXP1&2, LOG1&2 and Spline. On horizontal is the velocity you strike, and on vertical is the volume after processed by the trigger curve.

Diagram of 4 types of the curve

T O M 1 A D V

S e n s e T i m e 5 0

T O M 1 A D V

T r i g g e r L i n e a r

Strength Strength Strength Strength

Linear Exp Log Spline

Xtalk: Sets the crosstalk for pads. Use max power to strike a pad repeatedly until the screen shows OK, and then change to another pad and repeat the procedure.

Velocity data on other pads will be loaded automatically for reference in order to avoid crosstalk.

Note Send: Set the MIDI note for each trigger. When the MIDI note is different between this module and other sound sources, by adjusting this value they can be easily matched.

Rim Velocity: Rim velocity correction option will appear when you strike on the rim or edge parts. The higher the value is, the louder it will become. Cymbal edges are also included in this setting.

T O M 1 A D V

H e a d r o o m A u t o

T O M 1 A D V

N o t e S e n d 4 8

T O M 1 -R i m A D V

Rim Velocity 5 0

21

ENGLISH

REALKIT-touch User manual

Pedal Vel.: Decides the velocity triggered by hi-hat pedal. The higher the value is, the louder Pedal Chick and Pedal Splash sounds you get.

Calib: Calibration for the pedal range. Select this option, press down to the floor and then release the pedal slowly. Repeat the procedure several times to get more precise range and finish the calibration.

Spilt Point: Sets the velocity split point of Snare Rim

& X-Stick. If you play the snare rim softer than this value, it will trigger cross stick sound. Above that value it will trigger rim shot sound.

P e d a l

P e d a l V e l . 6 0

P e d a l

C a l i b 7 5 1 -3 9 0 0

Note: Some unique settings, such and Rim Velocity, Spilt Point.,Pedal Vel.,

Calib and etc., they will appear only if the matching part is struck. Or you can find them using DRUM button.

Tip: Use DRUM button can switch between triggers quickly in SETUP menu.

RESET

Restore to factory settings. It is strongly recommended to reboot the sound module after reset in completed, in order to avoid some unexpected behavior.

Kits: Initialize all the kits, including user kits.

Settings: Initialize all system settings.

Xtalk: Initialize cross talk to default value.

Songs: Initialize all user patterns.

All: Initialize everything to factory settings.

S E T U P

R E S E T K i t s

7. DRUM KIT EDIT

First, select a kit for editing. Press on the EDIT button to enter drum kit edit menu. There are 6 items available for kit editing.

The chapter <BASIC OPERATION> instructs how to enter the Edit mode, select part and item in details; this chapter offers more information.

VOICE TYPE: Select the category of the voice, including KICK, SNARE, TOM, RIDE, CRASH, HIHAT,

PERC (Percussions and FXs), METRO (Metronome),

--- (Blank).

Note: Select “---” for Pedal Splash if you don’t need it.

Part to edit

S N A R E -R i m

VOICE TYPE SNARE

Item name Editable parametr

22

ENGLISH

REALKIT-touch User manual

VOICE: Select a voice in its category. Create your own kit with voices you like.

Note: For hi-hats don’t have a matching Half-

Open sound, please set the HalfOpen voice the same to HIHAT-Open sound.

S N A R E -R i m

VOICE TYPE SNARE

S N A R E -R i m

VOICE R o c k R

VOLUME: Adjust the volume of current trigger. The higher the volume, the louder it will be.

REVERB: Adjust the reverb level of current trigger.

Overall reverb can be adjusted by S2 in FX mode, this value decides how much the current trigger will be affected by fader S2.

PITCH: Adjust the pitch of current trigger, measured in semitones.

S N A R E -R i m

VOL U M E 8 0

S N A R E -R i m

R E V E R B 1 2 0

S N A R E -R i m

P I T C H 0

PAN: Adjust the panning of current trigger. Minus value stands for left and 0 stands for middle position.

S N A R E -R i m

P A N 2 5

Tip: Use DRUM button can switch between triggers quickly in EDIT menu.

Note: For drum kit settings in EDIT menu, each setting affects one trigger.

For multi-triggering pads, they may have many triggers. For example, snare head, snare rim and snare X-stick can have different volume settings.

See to the picture below for trigger names:

HIHAT-Open

HIHAT-Close

HIHAT-HalfOpen

CRASH

CRASH-Edge

TOM1

TOM2

RIDE-Bow

RIDE-Edge

SNARE-Rim

SNARE-X-Stick

SNARE-Head

KICK

PEDAL-Chick

PEDAL-Splash

TOM3

23

ENGLISH

REALKIT-touch User manual

8. WARRANTY AND SERVICE

All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt.

The following cases/components are not covered from the above warranty:

• Any accessories supplied with the product

• Improper use

• Fault due to wear and tear

• Any modification of the product effected by the user or a third party

SOUNDSATION shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at SOUNDSATION discretion either by repair or by exchanging individual parts or the entire appliance. Any defective parts removed from a product during the course of a warranty claim shall become the property of SOUNDSATION.

While under warranty period, defective products may be returned to your local SOUNDSATION dealer together with original proof of purchase. To avoid any damages in transit, please use the original packaging if available. Alternatively you can send the product to SOUNDSATION SER-

VICE CENTER – Via Enzo Ferrari , 10 – 62017 Porto Recanati - Italy . In order to send a product to service center you need an RMA number. Shipping charges have to be covered by the owner of the product.

For further information please visit www.soundsationmusic.com

9. WARNING

PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein) only

This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2202/96/EC) and your national law.

This product should be handed over to a designated collection point, e.g., on an authorized onefor-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (WEEE).

Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with

WEEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources.

For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service.

24

APPENDIX

REALKIT-touch User manual

10. APPENDIX

10.1. Drum Kit List

1 Rock

2 Funk

3 Popin

4 Jazz

5 Metal

6 Latin 1

7 80s

8 Latin 2

9 Brush

10 Sunray

11

12

13

14

15

16

17

18

19

20

Fiesta

Mario

Impulse

Loop

DirtySouth

Nebula

Drumstep

Jungle

Utopia

Bluebay

In kit 14 Loop, each tom contains a different loop. If you strike on it, a loop will be played. Each loop is in 4 measures. At every fourth measure, if you strike on another tom, a loop will be played automatically in next bar. To stop playing a loop, simply strike on the tom corresponding to the loop current playing.

10.2. Pattern List

1 WalkWithTree

2 Soul

3 Latin

4 Moskau

5 Heart

6 Fable

7 theStorm

8 Beowulf

9 Forever

10 Acid

11 Arcane

12 toBeLoved

13 Rain

14 PopAges

15 ChaCha

16 Life

17 Home

21 MelodicDeath

22 SambaDance

23 RockBlues

24 Fly

25 Bossa

26 Tango

27 Dancing

28 CryintheRain

29 NightTrain

30 Arriba

31 Batteries

32 Revealite

33 Breathe

34 BlueEyes

35 HeyMan

36 Firerain

37 NyanCats

25

APPENDIX

18 Latina

19 Reality

20 SoftAmour

REALKIT-touch User manual

38 Supreme

39 Bartender

40 Celebration

Nota: l’assegnazione di default per tutti i Kit Utente è universale

10.3. Voice List (1)

KICK

Rock

Jazz

Indie 01

Indie 02

Metal

Funk 01

Funk 02

8Bit 01

8Bit 02

House 01

House 02

SNARE

Rock

Rock Rimshot

Rock X-Stick

Jazz 01

Jazz 01 Rimshot

Jazz X-Stick

Jazz 02

Jazz 02 Rimshot

Indie 01

Indie Rimshot 01

Indie X-Stick

Indie 02

Indie Rimshot 02

Metal

Metal Rimshot

Metal X-Stick

Funk 01

26

House 03

RnB 01

RnB 02

RnB 03

RnB 04

Techno 01

Techno 02

Techno 03

Techno 04

Trance 01

Trance 02

Funk X-Stick 02

8Bit 01

8Bit 02

House 01

House 02

House 03

House 04

House 05

RnB 01

RnB 02

RnB 03

RnB 04

RnB R 01

RnB R 02

RnB X-Stick 01

RnB X-Stick 02

Techno 01

Trance 03

Trance 04

Trance 05

Trap 01

Trap 02

Trap 03

Trap 04

Trap 05

Pop 01

Pop 02

Pop 03

Trance 02

Trance 03

Trance 04

Trap 01

Trap 02

Trap 03

Trap 04

Trap 05

Trap 06

Trap 07

Trap 08

Trap 09

Trap 10

Trap 11

Pop

Pop Rimshot

Pop X-Stick

Pop 04

Jungle

Latin

Session

Vintage

Jungle 01

Jungle 02

Fiesta

Latin Rimshot 01

Latin Rimshot 02

Session

Session Rimshot

Session X-Stick

Vintage

Vintage Rimshot

Vintage X-Stick

Jungle

Jungle Rimshot

Fiesta 01

FiestaRimshot 01

Fiesta X-Stick 01

Fiesta 02

FiestaRimshot 02

FiestaRimshot 03

APPENDIX

REALKIT-touch User manual

Funk Rimshot 01

Funk X-Stick 01

Funk 02

Funk Rimshot 02

Techno 02

Techno C 01

Techno C 02

Trance 01

Brush

Brush Rimshot

Brush X-Stick

Latin

Note: The voice in the list is a full name; some letters are omitted on screen display that is in light grey in the list.

10.4. Voice List (2)

TOM

Rock1

Rock1 Rimshot

Rock2

Rock2 Rimshot

Rock3

Rock3 Rimshot

Rock4

Rock4 Rimshot

Jazz1

Jazz1 Rimshot

Jazz2

Jazz2 Rimshot

Jazz3

Jazz3 Rimshot

Jazz3

Jazz3 Rimshot

Indie1

Indie2

Indie3

Indie3

Metal1

Metal2

Metal3

Metal4

Funk1 01

Funk2 01

Funk3 01

Funk4 01

Funk3 02

Funk4 02

8Bit1

8Bit2

8Bit3

8Bit4

House1 01

House2 01

House3 01

House4 01

House1 02

House2 02

House3 02

House4 02

House1 03

House2 03

House3 03

House4 03

RnB1

RnB2

RnB3

RnB4

Techno1

Techno2

Techno3

Techno4

Trance1 01

Trance2 01

Trance1 02

Trance2 02

Trance3 02

Trance4 02

Trap1 01

Trap2 01

Trap3 01

Trap1 02

Trap2 02

Trap3 02

Pop1

Pop1 Rimshot

Pop2

Pop2 Rimshot

Pop3

Pop3 Rimshot

Pop4

Pop4 Rimshot

Brush1

Brush2

Brush3

Brush4

Latin1

Latin2

Latin3

Latin4

Session1

Session2

Vintage1

Vintage1 Rimshot

Vintage2

Vintage2 Rimshot

Vintage3

Vintage3 Rimshot

Vintage4

Vintage4 Rimshot

Jungle1

Jungle1 Rimshot

Jungle2

Jungle2 Rimshot

Jungle3

Jungle3 Rimshot

Jungle4

Jungle4 Rimshot

Fiesta1

Fiesta1 Rimshot

Fiesta2

Fiesta2 Rimshot

Fiesta3

Fiesta3 Rimshot

Fiesta4

Fiesta4 Rimshot

27

APPENDIX

Funk1 02

Funk2 02

Trance3 01

Trance4 01

10.5. Voice List (3)

RIDE

Rock

Rock Bell

Rock Edge

Jazz

Jazz Bell

Jazz Edge

Indie

Indie Bell

Indie Edge

Funk 02

Funk Bell 02

CRASH

Rock1

Rock1 Edge

Rock2

Rock2 Edge

RockChina

RockSplash

Jazz1

Jazz1 Edge 01

Jazz2

Jazz2 Edge

JazzSplash 01

JazzSplash 02

Indie1 01

Indie2 01

Indie1 02

METRO

Claves

Claves-Low

Metro-Bell

Funk Edge 02

Funk 01

Funk Bell 01

Funk Edge 01

8Bit

House 01

House 02

House 03

RnB

Techno 01

Techno 02

Indie2 02

Funk1 02

Funk2 02

8Bit1

8Bit2

House 01

House 02

House 03

House 04

Trance1

Trance2

Trap1 01

Trap2 01

Pop1

Pop2

Metro-Click

Metro-Beep-High

Metro-Beep-Low

Session3

Session4

Trance

Pop

REALKIT-touch User manual

Pop Bell

Brush

Brush Bell

Brush Edge

Session

Vintage

Vintage Bell

Jungle

Jungle Bell

Session1

Session2

Vintage1

Vintage2

Jungle1

Jungle2

Fiesta1

Fiesta2

Cowbell

Cowbell-Low

Agogo- High

Fiesta

Fiesta Bell

Fiesta Edge

Agogo-Middle

28

APPENDIX

REALKIT-touch User manual

Voice List 4

HI-HAT

Rock Open

Rock Closed

Rock Pedal Chick

Rock Half-Open

Rock Pedal Splash

Jazz Open 01

Jazz Closed 01

Jazz Pedal Chick 01

Jazz Open 02

Jazz Closed 02

Jazz Pedal Chick 02

Indie Open 02

Indie Closed 02

Indie Pedal Chick 02

Metal Open

Metal Closed

Metal Pedal Chick

Funk Open 01

Funk Closed 01

Funk Pedal Chick 01

Funk Open 02

Funk Closed 02

Funk Pedal Chick 02

8Bit Open

8Bit Closed

House Open 01

House Closed 01

EXTRAS

Cowbell

FunkPercussion01

FunkPercussion02

8BitFX01

8BitFX02

8BitFX03

HouseFX01

HouseFX02

HouseFX05

HouseFX06

TranceFX01

TranceFX02

TranceFX03

TranceFX04

TranceFX05

TrapFX01

House Open 02

House Closed 02

House Open 03

House Closed 03

RnB Open 01

RnB Closed 01

RnB Open 02

RnB Closed 02

Techno Open 01

Techno Closed 01

Techno Open 02

Techno Closed 02

Trance Open 01

Trance Closed 01

Trance Open 02

Trance Closed 02

Trap Open 01

Trap Closed 01

Trap Open 02

Trap Closed 02

Trap Open 03

Trap Closed 03

Pop Open

Pop Closed

Pop Pedal Chick

Pop Half-Open

Pop Pedal Splash

Brush Open

Brush Closed

Brush Pedal Chick

Brush Half-Open

Brush Pedal Splash

Session Open

Session Closed

Session Pedal Chick

Session Pedal Splash

Vintage Open

Vintage Closed

Vintage Pedal Chick

Vintage Half-Open

Vintage Pedal Splash

Jungle Open

Jungle Closed

Jungle Pedal Chick

Jungle Half-Open

Jungle Pedal Splash

Fiesta Open

Fiesta Closed

Fiesta Pedal Chick

Fiesta Half-Open

Fiesta Pedal Splash

ElectricCowbell

DubstepFX01

DubstepFX02

DubstepFX03

DubstepFX04

DubstepFX05

Agogo01

Agogo02

29

APPENDIX

HouseFX03

HouseFX04

TrapFX02

ElectricShaker

11. SPECIFICATIONS

REALKIT-touch User manual

ShakerShort

ShakerLong

Configuration

Voice

Drum Kit

Pattern

Sound Effect

Equalizer

Metronome

Setup Menu

Pad Edit

Record

Display

Power

Aux. Socket

New Feature

3 X 8” Tom, 10” Mesh Snare (layered rims), 1 X12” Crash Cymbal

(with bow, edge & choke), 1 X12” Ride Cymbal(with bow, edge & choke), 8” Hi-Hat, Hi-Hat Control Pedal, 8” Kick + Drum Kick Pedal

431 High Quality Sounds

20 Preset Kits and 20 User Kits

40 Songs,Drum On/Off, Accomp On/Off

Reverb, Compressor, Equalizer with Professional DSP Processor

4-Band Equalizer, Real-time Control

On/Off, Tempo, Voice, Time Signature,TapTempo

Back Volume, MasterTune, Local, Fader FX Setup, Fader MIDI

Setup, Advanced (Sensitivity, Headroom, Trigger Curve, Auto

Crosstalk, MIDI Note Send, Rim Velocity, Pedal, SnareRim Split

Point), Reset

Voice, Volume, Pan, Pitch, Reverb

15 Songs

Back-light LCD, 2 Row X 16 Characters

12V DC

Headphone, Line In, Line Out (L/R), USB, Power, External TriggerX2

6 faders in three modes: Real-time pad volume control, FX control

(Reverb, compressor and 4-band equalizer), MIDI control. Kit with loop function. 5 step Hi-hat Pedal.

Specifications subject to change without notice.

30

This product is imported in EU by

Questo prodotto viene importato nella UE da

FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy

www.soundsationmusic.com

Soundsation® is a registered trademark of FRENEXPORT SPA - Italy

Soundsation® è un marchio di fabbrica registrato della FRENEXPORT SPA - Italy

www.soundsationmusic.com

Ver 1.1 - July 2016

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals