USER MANUAL OF FINGERPRINT DOOR LOCK

USER MANUAL OF FINGERPRINT DOOR LOCK
USER MANUAL OF FINGERPRINT DOOR LOCK
Thanks to use our fingerprint lock.
Please read the manual carefully before use.
Please keep well this manual for future query.
To know more about our new products or service. please contact with us directly.
User manual of fingerprint door lock
Please Read the Manual
Please check the packing before use.
Any change submit to our confirmation.
Any error or question in the manual, please feel free to contact us.
It is forbidden to copy our manual and for other usage, except the
authorized company and users.
For any wrong operation or installation to the user or third party, We
Front Panel
Back Panel
Mortise
does not responsible for the duty.
For the damage caused by anthropic factor or inevitable reason, We
does not pay the loss or maintain for free, please check our after
sale service terms.
Please do not take apart the lock if you are not technician, if
Buckle/Plastic box
Cylinder/Key
Screws/Tool
necessary, please make the operation under the guide of
technician.
Notice: There is maybe a little difference for product pictures with
real goods, please subject to our real products.
After changing the battery, please do not throw away them , kindly
refund to recycle bin in case of pollution!
01-02
User manual of fingerprint door lock
Phase 1 Summarization
Lock Description:
Technical Parameters
Fingerprint Sensor:
Optical sensor, blue window/360 degree recognition
Password:
20 groups
Master Fingerprint:
3pcs
User Fingerprint:
97pcs
Resolution:
500DPI
Reading Speed:
<1S
Battery box
Setup Button
Fingerprint sensor
Keypad
Reset Button
Static Current:
<25uA
Working Voltage:
DC4.5V~6v, 4pcs AA batteries
Battery Life:
15000 times
Working Temperature:
-20-55 degree
Unlock way:
Battery box cover
Slide cover
Cylinder cover
Cylinder
Thumb knob
Front panel
Touch the fingerprint to the window or enter right password, the
Back handle
Front handle
blue light flash one time with one sound, turn the
Back panel
handle to open the door.
if you do not open, it will lock after 5 seconds automatically.
Low voltage alarm:
if the power is less than 4.8v, there are 3 sounds for tip.
Cylinder
Reset&Setup Button
you can still open 10 times. if it is less than 4.5v, you
can not open the door any more.
Setup
Reset
03-04
User manual of fingerprint door lock
Phase 2 Installation Guide
1.Drill the Hole
We suggest you making the hole under the guide with manufacturer
and the door factory, to avoid the mistake or damage to the doors.
3.Drill the hole: see the pic(3), please first draw one horizontal base
line in the position of 1 meter to the ground, align the base line in the
drill drawing with the drawn line and make the hole as the picture
shows:
Door center line
Doo
Door
r s id
F ro n t
e
Align the horizontal line with
the base line in drilling map
Arrow Up!
Horizontal datum line
1 meter to ground
Door thickness/2
Door Frame
Pic(1)
2.Door frame drilling diagram
Door Thickness/2
Pic(3) Drilling Sketch Map
1 meter to ground
Datum line
Pic(2)
4.Drill door frame: please drill the hole in the door frame as drawing.
It is better to ask the technician to make the hole.
05-06
User manual of fingerprint door lock
II.Door Lock Assembly
There are 3 steps for the mortise, cylinder and panel. please follow
our instruction or the guide of technician.
2.Install Mortise
There are 2 types of mortises to use for different choice. And different for
left/right direction. Draw out the 8P connector out of the
hole and fix the screws as below.
Picture
1. Exploded View of Assembly
ANSI mortise 70#
ANSI mortise 60#
Size
Pic(4) Assembly Exploded View
Draw out the connector
No.
①
②
③
④
⑤
⑥
⑦
Name
Buckle box
Buckle
ST4x20 Cross sunk self-ta pping screw
M5xN Hexagon socket-cap -screw
Back panel
Small latch
M5x40 Hexagon socke t-cap -screw
Qty. No.
1
1
4
3
1
3
2
⑧
⑨
⑩
⑾
⑿
⒀
(14)
Name
Steel protector
Rubber gasket
M4x6 Cross sunk crew
Side plate
Mortise
Front panel
Battery box
Qty.
from the hole
1
1
2
1
1
1
1
Pic(5) Install Mortise
07-08
User manual of fingerprint door lock
2.Fix the Latch Bolt(Pic6)
Cylinder wing shall be up, or the key
cannot open the door
Cylinder wing insert
cross this square hole
Remark: dot in the spindle shall
align with the arrow in the mortise.
8P Cable
Pic8
Pic9
(4:1)
Not fasten too hard
Pic(6)
Dot/Arrow
Pic10
Pic11
Fix latch in front and back, check pic(7).
4.Fix the Back Panel(Refer Pic12/13/14/15)
4.1 Insert the small latch into the handle hole of back panel.Connect the 5P cable as Pic 12.13
4.2 Align the big latch bolt with the handle hole,align the knob
with the hole of mortise. Fasten the screws and fix the panel as Pic 14.
4.3 Put batteries inside and fix the screws as Pic15.
4.4 Adjust the lock panel to make sure it is in right position.
Remove the battery box
cover when put batteries.
This head shall point inside
Insert the small latch into
the handle hole of back panel
5P Cable
Pic12
Pic13
Pic(7) Install Latch
3.Fix the Front Panel(Refer Pic8/9/10/11)
3.1 Connect the 8P cable as Pic4 on the front panel.
3.2 Align the latch bolt with handle hole. align the cylinder wing with the
cylinder hole as Pic9 on the front panel. Aand fix them on the door as Pic10.
3.3 Align the PU cover and back panel cover and fix with screwsas Pic11.
Pic14
Pic15
Pic(10) Install Back Panel
09-10
User manual of fingerprint door lock
Phase 3 Operation Setting
3.1 Enroll Master Fingerprint
Press the SETUP button and hold for 3 seconds, there is two short beeps
and then three beeps . (di---di---di-di-di).
Function Description
1.Factory State
Under factory state, there is no fingerprint memory inside, any
fingerprint can open the door,after you set the master fingerprint, this
function will be invalid.
2.Factory password: 123456,only available under factory state, after set
the new password, the factory password will be invalid.
3.User fingerprint: to open the door include the dead locking door.
3.1 Iinitialization:
1.When there is no master fingerprint memory or master fingerprint is
not full inside the lock, there is sound tip"Please press master
fingerprint"-(then press one finger on the sensor windows)-"Please press
master fingerprint again"--(then press same one finger on the sensor
windows again), if operation is right, there is sound tip "Enroll master
fingerprint successfully". If press the wrong finger on the second time,
there is sound tip " please enter again, please press master fingerprint". If
there is no operation, the lock will repeat the tip " please enter again,
please press master fingerprint", the third time for sound tip is "Please
enter again", if still no operation, the lock will exit the setting master
fingerprint.
Press the RESET button and hold for 3 seconds, there is three short
beeps (di-di-di) and there is one sound tip "Initialization Successful" .
Then the lock is under the initialization state, there is no any fingerprint or
password inside the lock.
2 short beep
2 short beep
Then the lock is under factory state, any fingerprint can open the lock.
Please press
master fingerprint
Reset
3 short beep
Press SETUP button for 3 seconds
Setup
Reset
*
#
Press one finger
blue light
3 short beep
Please press
master fingerprint
again
Setup
1 long beep
“Initialization
successful”
*
#
Press finger
Open
Enroll master fingerprint
successfully
*
#
Press same finger
again
..........
if no operation
after 5 seconds
Long beep
Exist
11-12
User manual of fingerprint door lock
If you enroll the first master fingerprint successfully, you can
continue the same operation to enroll the left two master fingerprints
or you can press * key to exit the setting of master fingerprint; if you
press the # key to enter the detail settings, there is sound tip
Please press
master fingerprint
Tip for all operations
Please enter the user password
serial number
press # key to confirm
Setup
Reset
Add user password press 1
add user fingerprint press 2
*
Press SETUP button for 3 seconds
delete single user password press 3
*
#
#
Press master fingerprint
Press 1
delete single user fingerprint press 4
delete all user password press 5
*
#
Add another 2 master fingerprints
as above operations
#
*
Press serial number
and then press #
OR
*
Please enter the
user password again
please enter user password
press # key to confirm
press * to exit
delete all user fingerprint press 6
*
#
Enter password
press #
#
Press * key to enter other settings
Add user password successfully
please enter next user No.
If the fingerprint is full(3pcs). There is tip "Please press master
fingerprint"-(then press one finger on the sensor windows)- there is
sound tip:
Add user password press 1
add user fingerprint press 2
delete single user password press 3
*
Continue to add other password
with same operation as above
#
Enter same password
press #
Tip for wrong operation:
delete single user fingerprint press 4
delete all user password press 5
Wrong input
Please enter again
delete all user fingerprint press 6
*
#
Wrong input
Please enter again
*
#
Normally, you can add the user password like below steps:
If enter different password
Serial No. over 20
13-14
User manual of fingerprint door lock
3.2 Add User Fingerprint
Press the SETUP button and hold for 3 seconds, there is two short beeps
and then three beeps . ( like di---di---di-di-di).
If the master fingerprint are full. There is tip "Please press master
fingerprint"-(then press one finger on the sensor windows) - there is
sound tip
"Add user password press 1
Please press the
fingerprint again
please press user fingerprint
#
*
*
Press serial number
and then press #
add user fingerprint press 2
#
Press finger
delete single user password press 3
delete single user fingerprint press 4
delete all user password press 5
Add user fingerprint successfully
please enter next user No.
delete all user fingerprint press 6
Please press 2 to add the user fingerprint. There is sound tip"Please
enter the user fingerprint serial number. press # key to confirm. "
then enter the serial number(1-97), such as 01, and press # key to
confirm, the sound tip" please enter user fingerprint ", then press one
finger on the sensor as you like, there is sound tip" Please press the
user fingerprint again". Then enter the same finger and there is one long
sound with tip" Add user fingerprint successfully, please enter next
user No. " , you can continue to add the next user fingerprint, total
97 user fingerprints.
Please press
master fingerprint
Tip for all operations
*
#
Press same finger
Tip for wrong operation:
Wrong input
Please enter again
*
#
If enter different password
Setup
Continue to add other fingerprint
with same operation as above
Wrong input
Please enter again
*
#
Serial No. over 97
Reset
Press SETUP button for 3 seconds
*
#
Press master fingerprint
Please enter the user
fingerprint serial number
press # key to confirm
*
..........
#
Press 2
15-16
User manual of fingerprint door lock
User manual of fingerprint door lock
3.3 Delete Single User Password
Press the SETUP button and hold for 3 seconds, there is two short beeps
and then three beeps . (di---di---di-di-di).
If the master fingerprint are full. There is tip "Please press master
fingerprint"-(then press one finger on the sensor windows)- there is
sound tip
*
delete user fingerprint
successfully
please next user No.,
press # key to confirm
press * to exit
#
Continue to delete
another user password
*
#
Add user password press 1
Press serial number
and then press #
add user fingerprint press 2
Press serial number
and then press #
delete single user password press 3
delete single user fingerprint press 4
Tip for wrong operation:
delete all user password press 5
delete all user fingerprint press 6
Please press 3 to delete the single user password. There is sound
tip"Please enter the user password serial number. press # key to
confirm, press * to exit. " then enter the serial number(1-20), such as
01, and press # key to confirm, there is sound tip" Delete user password
successfully, please enter next user No., press # key to
confirm,press * to exit " , you can continue to delete the next user
password.
Please press
master fingerprint
Wrong input
Please enter again
*
#
If enter different
serial number
Wrong input
Please enter again
*
#
Serial No. over 97
Tip for all operations
Setup
Reset
Press SETUP button for 3 seconds
*
#
Press master fingerprint
Please enter the user
fingerprint serial number
press # key to confirm
press * to exit
*
..........
#
Press 3
17-18
User manual of fingerprint door lock
3.4 Delete Single User Fingerprint
Press the SETUP button and hold for 3 seconds, there is two short beeps
and then three beeps . ( like di---di---di-di-di).
If the master fingerprint are full. There is tip "Please press master
fingerprint"-(then press one finger on the sensor windows) - there is
sound tip
"Add user password press 1
*
Delete user fingerprint
successfully
please enter next user No.
press # key to confirm
press * to exit
#
Press serial number
and then press #
add user fingerprint press 2
delete single user password press 3
delete single user fingerprint press 4
delete all user password press 5
Continue to delete other fingerprint
with same operation as above
delete all user fingerprint press 6
*
Please press 4 to delete the single user fingerprint. There is sound
tip"Please enter the user fingerprint serial number. press # key to
confirm, press * to exit. " then enter the serial number(1-97), such as
01, and press # key to confirm, there is sound tip" Delete user fingerprint
successfully, please enter next user No. , press # key to
confirm, press * to exit ", you can continue to delete the next user
fingerprint.
#
Press other
serial number
Tip for wrong operation:
Wrong input
Please enter again
Please press
master fingerprint
Tip for all operations
*
Setup
#
If enter different
serial number
Reset
Press SETUP button for 3 seconds
*
Wrong input
Please enter again
*
#
Serial No. over 97
#
Press master fingerprint
Please enter the user
fingerprint serial number
press # key to confirm
press * to exit
*
..........
#
Press 4
19-20
User manual of fingerprint door lock
3.5 Delete All User Password
User
manual
of fingerprint door lock
3.6 Delete All
User
Fingerprints
Press the SETUP button and hold for 3 seconds, there is two short beeps
and then three beeps . (di---di---di-di-di).
Press the SETUP button and hold for 3 seconds, there is two short beeps
and then three beeps . (like di---di---di-di-di).
If the master fingerprint are full. There is tip "Please press master
fingerprint"-(then press one finger on the sensor windows)- there is
sound tip
If the master fingerprint are full. There is tip "Please press master
fingerprint"-(then press one finger on the sensor windows)- there is
sound tip
"Add user password press 1
Add user password press 1
add user fingerprint press 2
add user fingerprint press 2
delete single user password press 3
delete single user password press 3
delete single user fingerprint press 4
delete single user fingerprint press 4
delete all user password press 5
delete all user password press 5
delete all user fingerprint press 6
delete all user fingerprint press 6
Please press 6 to delete the single user fingerprint. There is sound
tip"Please enter the user fingerprint serial number. press # key to
confirm, press * to exit. " you can press # key to confirm, there is
sound tip" Delete all user fingerprints successfully" .
Please press 5 to delete all the user password. There is sound
tip" Delete all user passwords,press # key to confirm, press * to exit.
"you can press # key, then you can press # key to confirm, there is
sound tip" Delete all user password successfully".
Then there is sound tip again "Add user password press 1 , add
user fingerprint press 2, delete single user password press 3, delete
single user fingerprint press 4, delete all user password press5 ,
delete all user fingerprint press 6". You can choose the operation
as you like.
Then there is sound tip again "Add user password press 1 , add
user fingerprint press 2, delete single user password press 3, delete
single user fingerprint press 4, delete all user password press5 ,
delete all user fingerprint press 6". You can choose the operation
as you like.
Please press
master fingerprint
Please press
master fingerprint
Tip for all operations
Tip for all operations
Setup
Reset
Setup
Reset
Press SETUP button for 3 seconds
Press SETUP button for 3 seconds
*
*
#
Press master fingerprint
#
Press master fingerprint
Delete all user passwords
press # key to confirm
press * to exit
Delete all user fingerprints
successfully
delete all user password
successfully
delete all user
fingerprint successfully
*
*
#
Press 5
*
#
Press # key
*
#
#
Press 6
Press # key
21-22
User manual of fingerprint door lock
4. Alway Open Function
When it is under meeting or group action, you can set the lock as
passage function(always open state). Then
you can open the door directly without pressing fingerprint or
When the battery power is less than 4.8v, there is 3 long beeps
User you
manual
of fingerprint
dooron
lock
when
press
the fingerprint
the sensor windows. You can still
open about 50 times. Please change the battery in time.
Usually the battery can last for one year up to the using frequency
and conditions.
entering password.
Setting: open the door with any valid fingerprint, then press number
8 for 3 seconds, there is sound tip "di- di- di" , then there is tip
" Passage function available, press finger to exit", then you can turn
the lock handle and open directly.
: Beep---beep---beep
Low power
*
#
Press fingerprint
di-di-di
Passage function available
press finger to exit
*
*
#
Warm tip: the lock shall use alkaline battery! or it will cause failure of lock.
#
Press any valid
fingerprint
Depress handle
to open
when the power is low: there is di-di-di beep with red light flash then green
light. then you need to change battery in time.the way to change battery
is as below:
Press Number 8
for 3 seconds
Please refer the below picture to change the battery.
Notice the anode and cathode of battery to avoid the damage to the PCB.
Passage function
canceled
*
#
Press any valid
fingerprint to cancel
the passage function
4pcs AA Alkaline batteries
please do not throw away them
kindly refund to recycle bin in case of pollution!
23-24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement