EMV401 / 801 / 1601 Hybrid Mobile DVR

EMV401 / 801 / 1601 Hybrid Mobile DVR
EMV401 / 801 / 1601 Hybrid Mobile DVR
4 / 8 / 16CH, H.264, Real Time at D1/WD1/1080P
Quick Installation Guide
Copyright © EverFocus Electronics Corp,
Release Date: October, 2014
Notice: This content is subject to be changed without notice.
ii
EMV401/801/1601
1.
Introduction
The latest EverFocus hybrid digital video recorder generation is based on H.264 compression
technology, resulting in enhanced recording capacity and improved network image
transmission speed with high image quality.
The hybrid mobile DVR EMV401 / 801 / 1601 can support 4 / 8 / 16 channels in combination of
analog and IP cameras, (EMV1601 supports maximum 8 channels of IP cameras). EMV401 / 801
/ 1601 can deliver and record at real-time WD1 resolution of each analog camera and real-time
1080p resolution of each IP camera.
Its comprehensive features along with the embedded 3-axis g-sensor function enable the
almost universal application of this mobile DVR series. With EMV401 / 801 / 1601, you can
install either one 3.5”hard disk or one 2.5” hard disk as an option. It supports various interfaces
such as three USB ports / RS-485 / RS-232 / Panic Button / CAN bus / GPS, 3G, 4G and Wi-Fi
Antenna. The design of RCA video/audio outputs at front panel makes your installation easy.
The User Interface has been specially designed to fit mobile small-sized monitor.
EMV401 / 801 / 1601 are anti-shock and vibration due to the Molex connectors equipped. The
power supply supports voltage regulator, and delay on/off. In addition, EMV401 / 801 / 1601
can be equipped with an explosion-proof black box to keep the last minute recording clip for
testimony.
System Requirements
Before installing, please check that your computer meets the following system requirements.
Operating System
CPU
RAM
VGA
LAN Speed
Web Browser
Other Remote
Application
Windows XP (32-bit) / Win7 (32 and 64-bit)
Intel Core 2 Duo, 2.6GHz
2GB
AGP or PCI-Express, 800x600 (1280x1024 recommended), 32-bit
color
10 / 100 / 1000 Mbps (RJ45)
Windows (IE 8, 9, 10, Chrome, Firefox), MAC (TBD)
1. EverFocus’ CMS: Genie XMS xFleet (Server System) and EF xFleet
Lite (Windows AP)
2. EverFocus’ mobile app: MobileFocus for iOS and Android devices
MobileFocusHD for iPad
1
EMV401/801/1601
Packing List
•
EMV401 / 801 / 1601 Hybrid Digital Video Recorder x 1
•
HDD Tray (with 2 keys and 8 screws for 3.5” HDD, 6 screws for 2.5” HDD) x 1
•
Z-Type Bracket
•
Long Screw (with 4 washers) x 4
•
Short Screw (with 4 washers) x 4
•
IR Remote Control (with two AAA batteries) x 1
•
Power Harness Cable x 1
•
Video Cable x 4 (EMV1601); x2 (EMV801); x1 (EMV401)
•
Audio Cable x 4 (EMV1601); x2 (EMV801); x1 (EMV401)
•
Alarm Cable x 1
•
RS232/485 Cable x 1
•
CD x 1 (Please see Note 3.)
•
Quick Installation Guide x 1
x2
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information. Please also keep the shipping
carton for possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
3. The CD contains the IP Utility software, User Manual and Quick Installation Guide.
4. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
a. Use only two AAA dry cell batteries.
b. Do not dispose of the batteries in a fire as it may explode.
Optional Accessories
•
3G Receiver: For using 3G network function.
•
4G Receiver: For using 4G LTE network function.
•
GPS Receiver: For using GPS function.
•
Wi-Fi Antenna: For using Wi-Fi function.
2
EMV401/801/1601
Front Panel
1
2
3
4
5
No. Name
USB2.0
1
Port
2
3
4
5
6
7
8
8
6
7
8
9
Description
Two USB2.0 ports for connecting to the 3G USB dongle, USB storage
device or mouse.
RCA audio output for connecting to the speakers. The audio output only
Audio Out
works during playback.
RCA video output for connecting to a monitor for live view, playback and
displaying OSD.
Main
Note this mobile DVR has two Main Monitor outputs (one on the front
Monitor
panel and the other on the rear panel). All of the Main Monitor ports can
be connected simultaneously.
IR Receiver Receives data from the infrared remote control.
SD Card
Insert a SD card for data storage. It is currently reserved.
(TBD)
HDD Drive
Installs a 3.5” or 2.5” HDD for recording.
Tray
HDD Key
Locks and unlocks the HDD tray.
Lock
Two RJ-45 ports for connecting to the network.
Ethernet
It’s recommended to use LAN 1 for connecting to the IP cameras via a
Port
hub or switch, and use LAN 2 for WAN connection.
• GPS LED: Turns on when the mobile DVR is receiving the GPS data.
• Power LED: Turns on when the power is supplied.
• Copy LED: Turns on when the mobile DVR is archiving data to the USB
System
storage device.
LEDs
• HDD R/W LED: Turns on when the HDD is reading or writing.
• System Fail LED: Turns on when these events occur: HDD Full / Fan
Fail / HD Temperature.
• Heater LED: Turns on when the mobile DVR is overheating.
3
EMV401/801/1601
Rear Panel
2
1
7
8
3
10 11
9
5
4
6
12
No. Name
Description
1
Antenna 1 (3G/4G) Connects to the 3G or 4G Receiver for using 3G / 4G LTE function.
Power harness cable for connecting to 12 VDC ~ 24 VDC power
2
DC Power Input
source. For details, please refer to 2.4.1 Power Harness Cable of
the User’s Manual.
3
Antenna 2 (GPS)
Connects to the GPS Receiver for using GPS function.
Connects to RS-232 (CAN bus) or RS-485 device (such as analog PTZ
4
RS-232/485
cameras), please refer to 2.4.5 RS-232 / RS-485 cable of the User’s
Manual.
Main Monitor
VGA video output for connecting to the main monitor for live view,
5
(VGA)
playback and displaying OSD.
6
Antenna 3 (Wi-Fi)
Connects to the Wi-Fi antenna for using Wi-Fi function.
7
Main Monitor
(BNC)
BNC video output for connecting to the main monitor for live view,
playback and displaying OSD.
Note this mobile DVR has 3 Main Monitor outputs (one on the
front panel and the other 2 on the rear panel). All of the Main
Monitor ports can be connected simultaneously.
8
Call Monitor
(BNC)
BNC video output for connecting to the call monitor for displaying
the live view.
9
Alarm In / Out
D-Sub connector for connecting to the supplied Alarm Cable. For
details, please refer to 2.4.4 Alarm Cable of the User’s Manual.
10
USB2.0 Port
USB2.0 ports for connecting to the 3G USB dongle, USB storage
device or mouse.
11
Video Input
M12 connector for connecting to the supplied Video Cable. For
details, please refer to 2.4.2 Video Cable of the User’s Manual.
12
Audio Input
M12 connector for connecting to the supplied Audio Cable. For
details, please refer to 2.4.3 Audio Cable of the User’s Manual.
4
EMV401/801/1601
2.
Getting Started
2.1
Installation
Before installation, choose a location in the vehicle where it can:
• Provide convenient access for installing or removing the hard disk
• Allow air to flow around the fan vents. Inadequate or improper air flow can impede proper
operation of the hybrid mobile DVR
Please avoid installing the hybrid mobile DVR to the following locations in the vehicle:
• That is subject to high vibration / sunlight levels
• That is subject to be drenched of the rain
• Where passengers can interfere with the hybrid mobile DVR
• Next to a heater duct
The following table lists the recommended location options in the vehicle:
Location
Convenient
Operation
Easy to
Install
Low
Vibration
Good
Air Flow
Bottom of glove box- horizontal mount
Yes
Yes
Yes
Yes
Bottom of passenger seat next to the driver
No
Yes
Yes
Yes
Underneath bulkhead-horizontal mount
Yes
Yes
No
Yes
Front of bulkhead-horizontal mount
Beside deriver seat-horizontal mount
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Note: Do not install the hybrid mobile DVR on the floor or on the transmission access hatch.
These locations have the highest levels of vibration and may be subject to water damage.
5
EMV401/801/1601
2.1.1
Mounting
The EMV401 / 801 /1601 can be mounted horizontally. Two mounting types are available:
Support-Mount and Suspend-Mount.
Support-Mount
Suspend-Mount
To install the L-type brackets to the hybrid mobile DVR for mounting:
1.
Attach the supplied two L-Type Brackets to the Fixing Bracket on the hybrid mobile
DVR. Use the supplied four short screws with washers to screw the L-Type Brackets to
the Fixing Bracket.
Fixing Bracket
2.
L-Type Bracket
Screw the hybrid mobile DVR to the interface using the supplied four Long Screws with
washers.
6
EMV401/801/1601
2.2 Hard Disk Installation
The EMV401 / 801 / 1601 supply with a 3.5” HDD tray for inserting a Hard Disk for video
recordings. Please follow the steps below to install the Hard Disk.
Note:
1. If you want to use a 2.5” HDD, make sure to use the supplied 2.5” HDD tray screws to
secure the HDD to the HDD tray.
2. The EMV401 / 801 / 1601 does not support hot swap for the hard disk. Ensure to power
off the hybrid mobile DVR before removing the hard disk. Also ensure to remove the
hard disk only after the power was completely shut off. This would protect and extend
the operating life of the hard disk.
1. Make sure the hybrid mobile DVR is power-off.
2. Place the hard disk in the HDD tray, secure the HDD with the supplied HDD Screws (8 for
3.5” HDD and 6 for 2.5” HDD) on the bottom of the HDD tray.
3. Insert the HDD tray to the hybrid mobile DVR.
7
EMV401/801/1601
4. Push the Latch to fasten it to the HDD tray.
5. Lock the HDD tray using the supplied key.
Locked
Unlocked
6. To remove the HDD tray, slightly push the Lock Clip to loosen the Latch of the HDD tray.
Latch
Lock Clip
7. Pull out the HDD tray.
Hard Disk Tray
8
EMV401/801/1601
3. Basic Connection
After installing the EMV401 / 801 / 1601 in the vehicle, you can start connecting the hybrid
mobile DVR to the external devices. The instructions below describe the basic connection to the
EMV401 / 801 / 1601. For details on cable connections, please refer to the following sections.
Front View
1
2
3
Mouse
2.5"or
Speaker
3.5" HDD
4
2.
3.
4.
5.
6.
7.
8.
9.
6
5
7
3G USB
Dongle
Main Monitor
IP Cameras
1.
5
Rear View
8
9
Audio Cable
Audio Input
WAN
Notebook / PC
(PoE) Hub / Switch CMS (Client PC)
Video Cable
Analog Camera
Power Harness Cable Power Supply
To record videos, insert a 2.5” or 3.5” HDD to the HDD tray. Remember to lock the HDD Key
Lock after inserting the HDD or the recording will not start (see 2.2 Hard Disk Installation).
To control the system, connect a mouse to the hybrid mobile DVR or use the supplied IR
Remote Control.
To listen to audio of video source, connect a speaker to the Audio-out RCA socket. Note
that the speaker with a (built-in) amplifier and external power is required.
To view videos, connect a monitor to the RCA port using the RCA cable supplied by the
monitor manufacturer. You can also connect other video out ports, please refer to 2.5
Monitor Connection of the User’s Manual.
To manage the hybrid mobile DVR over network:
a. Use a standard RJ-45 cable to connect the hybrid mobile DVR to the network.
b. Connect a 3G USB dongle to the USB port on the hybrid mobile DVR. For details on 3G
wireless network settings, please refer to 6.6.3 Mobile of the User’s Manual.
You can optionally connect a (PoE) switch / hub to the LAN1 port of the hybrid mobile DVR
using a standard RJ-45 Ethernet cable for connecting the IP cameras.
Connect the supplied Power Harness Cable to the power supply in the vehicle for powering
the hybrid mobile DVR and the connected cameras. For details on vehicle connection,
please refer to 2.3 Vehicle Connection of the User’s Manual.
Connect the cameras to the hybrid mobile DVR using the supplied Video Cable.
Connect the audio input devices to the hybrid mobile DVR using the supplied Audio Cable
9
EMV401/801/1601
4. Accessing the NVR
You can look up the IP address and access the Web interface of the hybrid mobile DVR using
the IP Utility (IPU) program, which can be downloaded from EverFocus’ Website:
http://www.everfocus.com/HQ/Support/DownloadCenter_p1.aspx. Please connect the
hybrid mobile DVR in the same LAN of your computer.
1.
in your computer. Double click the .exe file and
Save IP Utility Setup AutoRun.exe
follow the on‐screen instructions. Check Run IPUtility.exe and click the Finish button, the
IP Utility will be launched to search the IP devices connected in the same LAN
automatically.
2.
To optionally configure the Machine Name, IP Address, IP Type or Port Number using the
IPU:
a. Log in the hybrid mobile DVR by checking the desired model and then click the Log in
icon. The Log in dialog box appears.
10
EMV401/801/1601
b. Type the Username and Password. Click the OK button, the status of the selected
camera will display Login.
Note:
1. The default user ID is admin and the default password is 11111111.
2. If you select more than one hybrid mobile DVRs that have the same user ID /
password, you will be able to log in several hybrid mobile DVRs at once.
c. Right click the column to configure the setting. Click Apply Changes
apply and save the settings.
button to
Note: Most networks uses DHCP to assign IP address, if you are unsure of your
network settings, please consult your network administrators for configuration
details.
3.
To access to the Live View window, double click the IP address of the desired device, the
login window pops up. Type the user ID and password to log in. By default, the user ID is
admin and the password is 11111111.
11
EMV401/801/1601
4.
When first connecting to the hybrid mobile DVR’s IP address, the following dialog will
appear. Please check the box and click the Run button to run the EverFocus Viewer
application.
5.
You might be required to download ActiveX and JAVA software for viewing the camera
feed. If asked, click Yes. For more details, please refer to 6.1 Installing ActiveX Controls.
6.
You may need to turn User Account Control off if you still can’t see the Remote Live View.
7.
On the computer, click Start > Control Panel > System and Security > Action Center (click
Change User Account Control Settings), the User Account Control Settings window appears.
Adjust the slide bar to Never Notify and then click OK. Restart your computer if requested.
8.
If your PC or laptop is running with Windows, it’s required to run the browser as
administrator when first entering the remote web page of the device. Go to C:\Program
Files (x86)\Internet Explorer, right-click the browser and then click Run as administrator.
9.
Now you will be able to see the remote live page.
12
EMV401/801/1601
5. Installing JAVA Runtime
You need to install the latest JAVA software for stable operation.
1. When first connecting to the NVR’s IP address, the following dialog will show up if you
didn’t install the JAVA software or its latest version on your computer.
2. Please click Update to go to the JAVA website http://www.java.com/en/, and
download the latest version of the JAVA software.
3. Please go to the Control Panel > JAVA Control Panel to change settings.
4. If you can’t find the JAVA in the Control Panel, please go to Program Files > Java > jre7 >
bin and double-click the javacpl (JAVA Control Panel).
5. Click Advanced tap on the top of the window, and scroll to “Mixed code (sandboxed vs.
trusted) security verification”, and select the Enable – hide warning and run with
protections.
13
EMV401/801/1601
6. Scroll to “Check for certificate revocation using”, and select the Online Certificate
Status Protocol (OCSP). Also, check Place JAVA icon in system tray in “Miscellaneous”
option.
7. Scroll to “Default JAVA for Browser” and check Mozilla family.
8. Connect the NVR’s IP address again and the yellow bar may pop up on the top of the
window. Please click it to run the JAVA application.
14
EMV401/801/1601
6. Browser Security Setting
6.1 Installing ActiveX Controls
Follow the steps below to install the ActiveX Controls when you first connect to the NVR’s
IP address. If you do not see the images below, your security settings may be too high. If so,
go to “Section 6.2 Enabling ActiveX Controls.”
1. You may also prompt to install the MSXML file. Please right-click the yellow bar and
select “Run Add-on…”
2. Install the MSXML file when prompted to do so.
3. Now you will be able to see the remote live page.
4. Please refer to 4. Accessing the NVR to adjust the settings of the User Account Control
if you still can’t see the remote live view.
15
EMV401/801/1601
6.2 Enabling Active Controls
Note this section is only necessary if you DO NOT see the image in step 1 of the 6.1
Installing ActiveX Controls popping up when you first connect to the NVR.
1. At the top of the Internet Explorer Window, click on Tools and then select Internet
Options.
2. Click the Security tab at the top of the window and then click Custom Level….
16
EMV401/801/1601
3. In the Security Settings window, scroll to “ActiveX controls and plug-ins”.
Set the controls as follows:
“Enable”:
 Allow previously unused ActiveX controls to run without prompt (Internet
Explorer 7 only)
 Allow scriptlets (IE7 only)
 Automatic prompting for ActiveX controls
 Binary and script behaviors
 Display video and animation on a webpage that does not use external media
player (IE7 only)
 Run ActiveX controls and plug-ins
 Script ActiveX controls marked safe for scripting
“Prompt”:
 Download signed ActiveX controls
 Download unsigned ActiveX controls
“Disable”:
Initialize and script ActiveX controls not marked as safe
4. Click OK and then choose Yes to change the security settings.
5. Close the window so you are back at the login screen.
17
EMV401/801/1601
6. Click the Refresh button to reload the page.
7. You may need to run the EverFocusViewer application when prompted to do so.
8. The login page will show up. Type in the user name and password and click Login to
view the cameras. The default User Name is admin, while the password is 11111111.
18
EverFocus Electronics Corp.
EverFocus Taiwan:
12F-1, No.79, Sec. 1, Shin-Tai Wu Road,
Hsi-Chih, New Taipei City, Taiwan
TEL: +886 2 2698 2334
FAX: +886 2 2698 3943
www.everfocus.com.tw
[email protected]
EverFocus Europe - Germany:
Albert-Einstein-Strasse 1, D-46446
Emmerich, Germany
TEL: +49 2822 93940
FAX: +49 2822 939495
www.everfocus.de
[email protected]
EverFocus China - Beijing:
Room 609, Technology Trade Building,
Shangdi Information Industry Base,
Haidian District, Beijing 100085, China
TEL: +86 10 6297 3336~39
FAX: +86 10 6297 1423
www.everfocus.com.cn
[email protected]
EverFocus China - Shenzhen:
4F, No. 2, D4 Building, Wan Yelong
Industrial Park, Tangtou Road, Shiyan,
Baoan, Shenzhen, Guangdong 518101, China
TEL: +86 755 2765 1313
FAX: +86 755 2765 0337
www.everfocus.com.cn
[email protected]
EverFocus USA - California:
1801 Highland Avenue, Unit A, Duarte, CA 91010, USA
TEL: +1 626 844 8888
FAX: +1 626 844 8838
www.everfocus.com
[email protected]
EverFocus USA - New York:
415 Oser Avenue, Unit S, Hauppauge, NY 11788, USA
TEL: +1 631 436 5070
FAX: +1 631 436 5027
www.everfocus.com
[email protected]
EverFocus Japan:
3F, Kuramochi, Building II, 2-2-3
Koto-Bashi,Sumida-Ku, Tokyo, 130-0022, Japan
TEL: +81 3 5625 8188
FAX: +81 3 5625 8189
www.everfocus.co.jp
[email protected]
EverFocus China - Shanghai:
Room 403, Ruijin Business Center, No.96,
Zhaojiabang Road, Luwan district, Shanghai 200020,
China
TEL: +86 21 6471 2229 / 6471 2291
FAX: +86 21 6471 0566
www.everfocus.com.cn
[email protected]
EverFocus India:
UBS, 629/1243, 1st Floor, G Block, Behind Teacher’s
Colony,Bandra Kurla Complex, Bandra (E),
Mumbai 400 051, India
TEL: +91 22 6726 4500
FAX: +91 22 6726 4518
www.everfocus.in
[email protected]
Your EverFocus product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of separately from
your household waste.
Please, dispose of this equipment at your
local community waste
collection/recycling centre.
In the European Union there are
separate collection systems for used
electrical and electronic product.
Please, help us to conserve the
environment we live in!
Ihr EverFocus Produkt wurde entwickelt
und hergestellt mit qualitativ
hochwertigen Materialien und
Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass elektrische
und elektronische Geräte am Ende ihrer
Nutzungsdauer vom Hausmüll getrennt
entsorgt werden sollen.
Bitte entsorgen Sie dieses Gerät bei Ihrer
örtlichen kommunalen Sammelstelle oder
im Recycling Centre.
Helfen Sie uns bitte, die Umwelt zu
erhalten, in der wir leben!
P/N: 4605PEMV04B082A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement